Catalyst 6500 IOS Command Reference
-
Upload
glen-monette -
Category
Documents
-
view
126 -
download
0
description
Transcript of Catalyst 6500 IOS Command Reference
-
Corporate HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706 USAhttp://www.cisco.comTel: 408 526-4000
800 553-NETS (6387)Fax: 408 526-4100
Catalyst 6500 Series Switch Cisco IOS Command ReferenceCisco IOS Release 12.1 E
Customer Order Number: DOC-7814058=Text Part Number: 78-14058-05
-
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCBs public domain version of the UNIX operating system. All rights reserved. Copyright 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED AS IS WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
CCSP, the Cisco Square Bridge logo, Cisco Unity, Follow Me Browsing, FormShare, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, ProConnect, RateMUX, Registrar, ScriptShare, SlideCast, SMARTnet, StrataView Plus, SwitchProbe, TeleRouter, The Fastest Way to Increase Your Internet Quotient, TransPath, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0406R)
Catalyst 6500 Series Switch Cisco IOS Command ReferenceCopyright 20012004 Cisco Systems, Inc. All rights reserved.
-
Catalyst 6500 Series Sw78-14058-05
class-map 2-20
clear catalyst6000 traffic-meter 2-22
clear counters 2-23
clear interface gigabitethernet 2-25
clear interface vlan 2-26C O N T E N T S
Preface xix
Audience xix
Organization xix
Related Documentation xix
Conventions xx
Obtaining Documentation xxi
Documentation Feedback xxi
Obtaining Technical Assistance xxii
Obtaining Additional Publications and Information xxiii
C H A P T E R 1 Command-Line Interface 1-1
Getting Help 1-1
How to Find Command Options 1-2
Understanding Command Modes 1-5
Using the No and Default Forms of Commands 1-6
Using the CLI String Search 1-7
Saving Configuration Changes 1-11
C H A P T E R 2 Cisco IOS Commands for the Catalyst 6500 Series Switches 2-1
action 2-2
apply 2-4
attach 2-5
auto-sync 2-8
boot config 2-10
cd 2-12
channel-group 2-15
channel-protocol 2-18iiiitch Cisco IOS Command ReferenceRelease 12.1 E
-
Contentsclear ip access-template 2-27
clear ip auth-proxy watch-list 2-28
clear ip cef epoch full 2-29
clear ip cef inconsistency 2-31
clear ip flow stats 2-32
clear ip igmp group 2-33
clear lacp counters 2-35
clear mac-address-table dynamic 2-36
clear mls 2-38
clear mls exclude protocol 2-41
clear mls ip multicast statistics 2-42
clear mls nde counters 2-43
clear mls nde flow 2-44
clear mls qos 2-45
clear pagp 2-47
clear spanning-tree detected-protocol 2-48
clear vlan counters 2-50
copy /noverify 2-51
debug adjacency 2-54
debug backup 2-55
debug callback 2-56
debug cca 2-57
debug condition interface 2-58
debug condition standby 2-60
debug condition vlan 2-62
debug earl 2-64
debug ehsa 2-65
debug entry 2-66
debug etherchnl 2-67
debug ethernet-interface 2-69
debug fastethernet 2-70
debug fm 2-71
debug gssapi 2-72
debug icc 2-73
debug iccshim 2-74ivCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Contentsdebug interface 2-75
debug ipc 2-77
debug ip rgmp 2-78
debug l2-mgr events 2-79
debug l3-mgr 2-80
debug local-ack 2-81
debug ltl 2-82
debug mergeapi 2-83
debug mls ip multicast 2-84
debug mls rp 2-85
debug monitor 2-86
debug msc 2-87
debug netdr 2-88
debug nvram 2-90
debug pagp 2-91
debug pf 2-92
debug pm 2-93
debug priority 2-95
debug qm 2-96
debug qm-sp 2-97
debug rpc 2-98
debug scp 2-100
debug smf updates 2-101
debug spanning-tree 2-102
debug spanning-tree backbonefast 2-103
debug spanning-tree switch 2-104
debug spanning-tree uplinkfast 2-106
debug sw-vlan 2-107
debug sw-vlan ifs 2-108
debug sw-vlan notification 2-110
debug sw-vlan vtp 2-111
debug tcam 2-113
debug udld 2-114
debug vacl 2-116
debug vlog 2-117vCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Contentsdefine interface-range 2-118
diagnostic level 2-120
disconnect qdm 2-122
do 2-123
dot1x default 2-124
dot1x max-req 2-125
dot1x multi-hosts 2-126
dot1x port-control 2-127
dot1x reauthentication 2-129
dot1x system-auth-control 2-130
dot1x timeout 2-131
duplex 2-133
erase 2-135
errdisable detect cause 2-137
errdisable flap-setting cause 2-139
errdisable recovery 2-140
fabric lcd-banner 2-142
fabric required 2-144
fabric switching-mode allow 2-145
file verify auto 2-147
flowcontrol 2-148
format 2-150
fsck 2-152
hold-queue 2-155
hw-module reset 2-157
instance 2-158
interface 2-160
interface port-channel 2-162
interface range 2-164
interface vlan 2-166
ip access-list hardware permit fragments 2-168
ip auth-proxy max-login-attempts 2-170
ip auth-proxy watch-list 2-171
ip cef table consistency-check 2-173
ip flow-aggregation cache 2-175viCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Contentsip flow-cache entries 2-177
ip flow-export destination 2-179
ip flow-export source 2-181
ip flow-export version 2-183
ip igmp snooping 2-185
ip igmp snooping fast-leave 2-186
ip igmp snooping l2-entry-limit 2-187
ip igmp snooping last-member-query-interval 2-188
ip igmp snooping mrouter 2-190
ip igmp snooping querier 2-192
ip igmp snooping static 2-194
ip local-proxy-arp 2-196
ip multicast rpf backoff 2-197
ip multicast rpf interval 2-199
ip pim autorp listener 2-200
ip rgmp 2-201
ip route-cache flow 2-203
ip sticky-arp 2-205
ip verify unicast reverse-path 2-206
ip verify unicast source reachable-via 2-208
ip wccp group-listen 2-210
ip wccp redirect exclude in 2-212
ip wccp web-cache accelerated 2-213
l2protocol-tunnel 2-215
l2protocol-tunnel cos 2-217
l2protocol-tunnel drop-threshold 2-219
l2protocol-tunnel shutdown-threshold 2-221
lacp port-priority 2-223
lacp system-priority 2-224
link debounce 2-225
logging event link-status (global configuration) 2-227
logging event link-status (interface configuration) 2-229
logging event subif-link-status 2-230
mac access-list extended 2-231
mac-address-table aging-time 2-233viiCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Contentsmac-address-table static 2-234
mac-address-table unicast-flood 2-236
match 2-238
maxconns (real server configuration submode) 2-240
maximum-paths 2-241
mdix auto 2-242
mkdir disk0: 2-243
mls aclmerge algorithm 2-244
mls aging fast 2-246
mls aging long 2-247
mls aging normal 2-248
mls exclude protocol 2-249
mls flow 2-250
mls ip 2-252
mls ip cef arp-throttling 2-253
mls ip cef load-sharing full 2-254
mls ip cef rate-limit 2-255
mls ip directed-broadcast 2-256
mls ip inspect 2-258
mls ip multicast (global configuration mode) 2-259
mls ip multicast (interface configuration mode) 2-260
mls ip multicast connected 2-261
mls ip multicast consistency-check 2-262
mls ip multicast non-rpf-netflow (global configuration mode) 2-264
mls ip multicast non-rpf-netflow (interface configuration mode) 2-265
mls ip multicast stub 2-266
mls ip multicast threshold 2-268
mls ip pbr 2-269
mls ipx (interface configuration mode) 2-270
mls nde flow 2-271
mls nde interface 2-273
mls nde sender 2-274
mls nde src_address 2-276
mls netflow 2-277
mls netflow maximum-flows 2-278viiiCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Contentsmls netflow sampling 2-279
mls netflow usage notify 2-280
mls qos (global configuration mode) 2-281
mls qos (interface configuration mode) 2-283
mls qos aggregate-policer 2-284
mls qos bridged 2-287
mls qos channel-consistency 2-288
mls qos cos 2-289
mls qos flow-policing 2-290
mls qos map cos-dscp 2-291
mls qos map dscp-cos 2-292
mls qos map ip-prec-dscp 2-294
mls qos map policed-dscp 2-296
mls qos queueing-only 2-297
mls qos statistics-export (global configuration mode) 2-299
mls qos statistics-export (interface configuration mode) 2-300
mls qos statistics-export aggregate-policer 2-302
mls qos statistics-export class-map 2-304
mls qos statistics-export delimiter 2-307
mls qos statistics-export destination 2-308
mls qos statistics-export interval 2-310
mls qos trust 2-311
mls qos trust extend 2-313
mls qos vlan-based 2-315
mls rp ip (global configuration mode) 2-316
mls rp ip (interface configuration mode) 2-317
mls rp ipx (global configuration mode) 2-318
mls rp ipx (interface configuration mode) 2-319
mls rp management-interface 2-320
mls rp nde-address 2-321
mls rp vlan-id 2-323
mls rp vtp-domain 2-324
mls sampling 2-325
mode 2-327
monitor session 2-329ixCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Contentsmpls l2transport route 2-333
mpls load-balance per-label 2-335
mtu 2-336
name 2-338
net 2-339
pagp learn-method 2-341
pagp port-priority 2-342
policy-map 2-343
port-channel load-balance 2-346
power enable 2-348
power inline 2-349
power redundancy-mode 2-350
ppp link 2-351
private-vlan 2-353
private-vlan mapping 2-355
private-vlan synchronize 2-357
protocol-filtering 2-358
rcv-queue cos-map 2-359
rcv-queue queue-limit 2-361
rcv-queue random-detect 2-363
rcv-queue threshold 2-365
redundancy 2-367
redundancy force-switchover 2-368
reload 2-369
remote command 2-371
remote login 2-373
remote-span 2-375
reset 2-376
retry 2-377
revision 2-378
rmon alarm 2-379
rmon event 2-381
scheduler allocate 2-383
service counters max age 2-385
service-policy input 2-386xCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Contentssession slot 2-387
set ip dscp 2-388
set ip precedence (policy-map) 2-390
show 2-392
show adjacency 2-394
show arp 2-397
show asic-version 2-398
show bootflash: 2-399
show bootvar 2-401
show cable-diagnostics prbs 2-402
show cable-diagnostics tdr 2-404
show catalyst6000 2-406
show cdp neighbors 2-408
show class-map 2-411
show counters interface 2-412
show cwan 2-415
show diagnostic 2-417
show dot1q-tunnel 2-419
show dot1x 2-421
show environment alarm 2-423
show environment status 2-426
show environment temperature 2-429
show eobc 2-431
show errdisable detect 2-434
show errdisable recovery 2-435
show etherchannel 2-436
show fabric 2-440
show fm features 2-443
show fm inband-counters 2-445
show fm insp 2-446
show fm interface 2-447
show fm reflexive 2-449
show fm summary 2-450
show fm vlan 2-451
show icc 2-453xiCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Contentsshow idprom 2-455
show interfaces 2-458
show interfaces capabilities 2-460
show interfaces counters 2-463
show interfaces debounce 2-466
show interfaces description 2-467
show interfaces flowcontrol 2-468
show interfaces private-vlan mapping 2-470
show interfaces status 2-471
show interfaces summary 2-473
show interfaces switchport 2-474
show interfaces trunk 2-477
show ip auth-proxy watch-list 2-480
show ip cache flow 2-481
show ip cef epoch 2-485
show ip cef inconsistency 2-487
show ip cef summary 2-489
show ip cef vlan 2-490
show ip igmp interface 2-491
show ip igmp snooping mrouter 2-493
show ip mroute 2-494
show ip rpf events 2-499
show ip wccp 2-500
show ipc 2-502
show l2protocol-tunnel 2-504
show l3-mgr 2-506
show lacp 2-508
show mac-address-table 2-512
show mls asic 2-518
show mls cef 2-519
show mls cef adjacency 2-521
show mls cef exact-route 2-523
show mls cef hardware 2-524
show mls cef ip 2-526
show mls cef ipx 2-528xiiCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Contentsshow mls cef logging 2-529
show mls cef mac 2-530
show mls cef statistics 2-531
show mls cef summary 2-532
show mls ip 2-534
show mls ip multicast 2-537
show mls ip statistics 2-540
show mls ipx 2-541
show mls nde 2-543
show mls netflow 2-544
show mls netflow ip 2-546
show mls netflow ipx 2-549
show mls qos 2-551
show mls qos aggregate policer 2-554
show mls qos statistics-export info 2-555
show mls sampling 2-557
show mls statistics 2-558
show mls table-contention 2-560
show module 2-561
show monitor session 2-563
show mpls l2transport vc 2-565
show mpls ttfib 2-569
show msfc 2-570
show pagp 2-574
show platform 2-576
show policy-map 2-580
show policy-map interface 2-582
show port-security 2-584
show power 2-586
show protocol-filtering 2-589
show qdm status 2-590
show qm-sp port-data 2-591
show queueing interface 2-593
show redundancy 2-595
show rom-monitor 2-598xiiiCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Contentsshow rpc 2-599
show running-config 2-601
show scp 2-603
show slot0: 2-604
show spanning-tree 2-607
show spanning-tree mst 2-613
show standby delay 2-616
show sup-bootflash 2-617
show tcam counts 2-620
show tcam interface 2-622
show tech-support 2-624
show udld 2-626
show version 2-628
show vlan 2-631
show vlan access-log 2-635
show vlan access-map 2-637
show vlan counters 2-638
show vlan dot1q tag native 2-639
show vlan filter 2-640
show vlan internal usage 2-642
show vlan mapping 2-644
show vlan private-vlan 2-645
show vlan remote-span 2-647
show vlans 2-648
show vtp 2-650
shutdown vlan 2-653
snmp ifindex clear 2-654
snmp ifindex persist 2-655
snmp-server enable traps 2-657
snmp-server ifindex persist 2-659
spanning-tree backbonefast 2-660
spanning-tree bpdufilter 2-661
spanning-tree bpduguard 2-663
spanning-tree cost 2-664
spanning-tree etherchannel guard misconfig 2-666xivCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Contentsspanning-tree extend system-id 2-667
spanning-tree guard 2-668
spanning-tree link-type 2-669
spanning-tree loopguard default 2-670
spanning-tree mode 2-671
spanning-tree mst 2-672
spanning-tree mst configuration 2-674
spanning-tree mst forward-time 2-676
spanning-tree mst hello-time 2-677
spanning-tree mst max-age 2-678
spanning-tree mst max-hops 2-679
spanning-tree mst root 2-680
spanning-tree pathcost method 2-682
spanning-tree portfast (interface configuration mode) 2-683
spanning-tree portfast bpdufilter default 2-685
spanning-tree portfast bpduguard default 2-687
spanning-tree portfast default 2-688
spanning-tree port-priority 2-689
spanning-tree uplinkfast 2-690
spanning-tree vlan 2-692
speed 2-694
squeeze 2-697
stack-mib portname 2-698
standby delay minimum reload 2-699
standby track 2-701
standby use-bia 2-703
storm-control level 2-705
switchport 2-707
switchport access vlan 2-709
switchport capture 2-711
switchport capture allowed vlan 2-713
switchport dot1q 2-715
switchport mode 2-717
switchport port-security 2-719
switchport port-security aging time 2-720xvCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Contentsswitchport port-security mac-address 2-721
switchport port-security maximum 2-722
switchport port-security violation 2-723
switchport private-vlan host-association 2-724
switchport private-vlan mapping 2-726
switchport protocol 2-728
switchport trunk 2-730
switchport voice vlan 2-734
sync-restart-delay 2-736
system jumbomtu 2-737
tcam priority 2-738
test cable-diagnostics 2-740
time-range 2-743
udld 2-745
udld port 2-747
udld reset 2-750
undelete 2-751
upgrade rom-monitor 2-753
username 2-755
verify 2-757
vlan (config-VLAN submode) 2-760
vlan (global configuration mode) 2-763
vlan (VLAN configuration submode) 2-765
vlan access-log 2-768
vlan access-map 2-770
vlan database 2-772
vlan dot1q tag native 2-774
vlan filter 2-776
vlan internal allocation policy 2-778
vlan mapping 2-780
vtp 2-782
wrr-queue bandwidth 2-785
wrr-queue cos-map 2-787
wrr-queue queue-limit 2-788
wrr-queue random-detect 2-790xviCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Contentswrr-queue threshold 2-792
A P P E N D I X A Acronyms A-1
A P P E N D I X B Acknowledgments for Open-Source Software B-1
I N D E XxviiCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
ContentsxviiiCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Preface
This preface describes the audience, organization, and conventions of this publication, and provides information on how to obtain related documentation.
AudienceThis publication is for experienced network administrators who are responsible for configuring and maintaining Catalyst 6500 series switches.
OrganizationThis publication is organized as follows:
Related DocumentationThe Catalyst 6500 series switch Cisco IOS documentation set includes these documents:
Chapter Title Description
Chapter 1 Command-Line Interface Describes the Catalyst 6500 series switch CLI.
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series Switches
Lists alphabetically and provides detailed information for Cisco IOS commands specific to the Catalyst 6500 series switch.
Appendix A Acronyms Defines the acronyms used in this publication.xixCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
Catalyst 6500 Series Switch Module Installation Guide Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide Catalyst 6500 Series Switch Cisco IOS System Message Guide Release Notes for Catalyst 6500 Series Switch Cisco IOS Software Release X.X
-
PrefaceConventionsThe Cisco IOS documentation set includes these documents: Configuration Fundamentals Configuration Guide Command Reference
For information about MIBs, refer to this URL:http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
ConventionsThis document uses the following conventions:
Notes use the following conventions:
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the publication.
Convention Description
boldface font Commands, command options, and keywords are in boldface.
italic font Arguments for which you supply values are in italics.[ ] Elements in square brackets are optional.{ x | y | z } Alternative keywords are grouped in braces and separated by
vertical bars. Braces can also be used to group keywords and/or arguments; for example, {interface interface type}.
[ x | y | z ] Optional alternative keywords are grouped in brackets and separated by vertical bars.
string A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.
screen font Terminal sessions and information the system displays are in screen font.
boldface screen font
Information you must enter is in boldface screen font.
italic screen font Arguments for which you supply values are in italic screen font.
^ The symbol ^ represents the key labeled Controlfor example, the key combination ^D in a screen display means hold down the Control key while you press the D key.
< > Nonprinting characters, such as passwords are in angle brackets.
[ ] Default responses to system prompts are in square brackets.!, # An exclamation point (!) or a pound sign (#) at the beginning
of a line of code indicates a comment line.xxCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
PrefaceObtaining DocumentationCautions use the following conventions:
Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.
Obtaining DocumentationCisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.
Cisco.comYou can access the most current Cisco documentation at this URL:http://www.cisco.com/univercd/home/home.htmYou can access the Cisco website at this URL:http://www.cisco.comYou can access international Cisco websites at this URL:http://www.cisco.com/public/countries_languages.shtml
Ordering DocumentationYou can find instructions for ordering documentation at this URL:http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htmYou can order Cisco documentation in these ways:
Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Ordering tool:http://www.cisco.com/en/US/partner/ordering/index.shtml
Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS (6387).
Documentation FeedbackYou can send comments about technical documentation to [email protected] 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
PrefaceObtaining Technical AssistanceYou can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:Cisco SystemsAttn: Customer Document Ordering170 West Tasman DriveSan Jose, CA 95134-9883We appreciate your comments.
Obtaining Technical AssistanceFor all customers, partners, resellers, and distributors who hold valid Cisco service contracts, Cisco Technical Support provides 24-hour-a-day, award-winning technical assistance. The Cisco Technical Support Website on Cisco.com features extensive online support resources. In addition, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not hold a valid Cisco service contract, contact your reseller.
Cisco Technical Support WebsiteThe Cisco Technical Support Website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day, 365 days a year at this URL:http://www.cisco.com/techsupportAccess to all tools on the Cisco Technical Support Website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL:http://tools.cisco.com/RPF/register/register.do
Submitting a Service RequestUsing the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool automatically provides recommended solutions. If your issue is not resolved using the recommended resources, your service request will be assigned to a Cisco TAC engineer. The TAC Service Request Tool is located at this URL:
http://www.cisco.com/techsupport/servicerequestFor S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco TAC engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.To open a service request by telephone, use one of the following numbers:Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)EMEA: +32 2 704 55 55USA: 1 800 553 2447xxiiCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
PrefaceObtaining Additional Publications and InformationFor a complete list of Cisco TAC contacts, go to this URL:http://www.cisco.com/techsupport/contacts
Definitions of Service Request SeverityTo ensure that all service requests are reported in a standard format, Cisco has established severity definitions.Severity 1 (S1)Your network is down, or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation. Severity 2 (S2)Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.Severity 3 (S3)Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.
Severity 4 (S4)You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.
Obtaining Additional Publications and InformationInformation about Cisco products, technologies, and network solutions is available from various online and printed sources.
Cisco Marketplace provides a variety of Cisco books, reference guides, and logo merchandise. Visit Cisco Marketplace, the company store, at this URL:http://www.cisco.com/go/marketplace/
The Cisco Product Catalog describes the networking products offered by Cisco Systems, as well as ordering and customer support services. Access the Cisco Product Catalog at this URL:http://cisco.com/univercd/cc/td/doc/pcat/
Cisco Press publishes a wide range of general networking, training and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press at this URL:http://www.ciscopress.com
Packet magazine is the Cisco Systems technical user magazine for maximizing Internet and networking investments. Each quarter, Packet delivers coverage of the latest industry trends, technology breakthroughs, and Cisco products and solutions, as well as network deployment and troubleshooting tips, configuration examples, customer case studies, certification and training information, and links to scores of in-depth online resources. You can access Packet magazine at this URL:
http://www.cisco.com/packetxxiiiCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
PrefaceObtaining Additional Publications and Information iQ Magazine is the quarterly publication from Cisco Systems designed to help growing companies learn how they can use technology to increase revenue, streamline their business, and expand services. The publication identifies the challenges facing these companies and the technologies to help solve them, using real-world case studies and business strategies to help readers make sound technology investment decisions. You can access iQ Magazine at this URL:http://www.cisco.com/go/iqmagazine
Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:http://www.cisco.com/ipj
World-class networking training is available from Cisco. You can view current offerings at this URL:
http://www.cisco.com/en/US/learning/index.htmlxxivCatalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Catalyst 6500 Series Switch Cisco IO78-14058-05
abbreviated-command-entry Complete a partia? List all command
command mode. l command name. s available for a particular C H A P T E R 1Command-Line Interface
This chapter provides information for understanding and using the Catalyst 6500 series switch Cisco IOS software using the command-line interface (CLI). This chapter includes the following sections:
Getting Help, page 1-1 How to Find Command Options, page 1-2 Understanding Command Modes, page 1-5 Using the No and Default Forms of Commands, page 1-6 Using the CLI String Search, page 1-7 Saving Configuration Changes, page 1-11
For an overview of the Catalyst 6500 series switch Cisco IOS software configuration, refer to the Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide.
Getting HelpTo obtain a list of commands that are available for each command mode, enter a question mark (?) at the system prompt. You also can obtain a list of any commands associated keywords and arguments with the context-sensitive help feature.
Table 1-1 lists commands you can enter to get help that is specific to a command mode, a command, a keyword, or an argument.
Table 1-1 Getting Help
Command Purpose
abbreviated-command-entry? Obtain a list of commands that begin with a particular character string. (Do not leave a space between the command and question mark.)1-1S Command ReferenceRelease 12.1 E
-
Chapter 1 Command-Line InterfaceHow to Find Command OptionsHow to Find Command OptionsThis section provides an example of how to display syntax for a command. The syntax can consist of optional or required keywords. To display keywords for a command, enter a question mark (?) at the configuration prompt or after entering part of a command followed by a space. The Catalyst 6500 series switch software displays a list of available keywords along with a brief description of the keywords. For example, if you are in global configuration mode and want to see all the keywords for the arap command, you enter arap ?. Table 1-2 shows examples of how you can use the question mark (?) to assist you in entering commands and also guides you through entering the following commands:
interface gigabitethernet 1/1 channel-group 1 mode auto
command ? List a commands associated keywords. Leave a space between the command and question mark.
command keyword ? List a keywords associated arguments. Leave a space between the keyword and question mark.
Table 1-1 Getting Help (continued)
Command Purpose
Table 1-2 How to Find Command Options
Command Comment
Router> enablePassword: Router#
Enter the enable command and password to access privileged EXEC commands. You are in privileged EXEC mode when the prompt changes to Router#.
Router# configure terminalEnter configuration commands, one per line. End with CNTL/Z.Router(config)#
Enter global configuration mode.You are in global configuration mode when the prompt changes to Router(config)#.
Router(config)# interface gigabitethernet ? GigabitEthernet interface number Router(config)# interface gigabitethernet 1/1Router(config-if)#
Enter interface configuration mode by specifying the Gigabit Ethernet interface that you want to configure using the interface gigabitethernet global configuration command.Enter a ? to display what you must enter next on the command line. In this example, you must enter an interface number from 1 to 9 in the format module-number/port-number.You are in interface configuration mode when the prompt changes to Router(config-if)#.1-2Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 1 Command-Line InterfaceHow to Find Command OptionsRouter(config-if)#?Interface configuration commands: access-expression Build a bridge boolean access expression apollo Apollo interface subcommands appletalk Appletalk interface subcommands arp Set arp type (arpa, probe, snap) or timeout backup Modify backup parameters bandwidth Set bandwidth informational parameter bgp-policy Apply policy propogated by bgp community string bridge-group Transparent bridging interface parameters carrier-delay Specify delay for interface transitions cdp CDP interface subcommands channel-group Etherchannel/port bundling configuration clns CLNS interface subcommands cmns OSI CMNS custom-queue-list Assign a custom queue list to an interface decnet Interface DECnet config commands default Set a command to its defaults delay Specify interface throughput delay description Interface specific description dlsw DLSw interface subcommands dspu Down Stream PU exit Exit from interface configuration mode fair-queue Enable Fair Queuing on an Interface flowcontrol Configure flow operation. fras DLC Switch Interface Command help Description of the interactive help system hold-queue Set hold queue depth ip Interface Internet Protocol config commands ipx Novell/IPX interface subcommands isis IS-IS commands iso-igrp ISO-IGRP interface subcommands
.
.
.
Router(config-if)#
Enter a ? to display a list of all the interface configuration commands available for the Gigabit Ethernet interface.
Router(config-if)# channel-group ? group channel-group of the interface
Router(config-if)#channel-group
Enter the command that you want to configure for the controller. In this example, the channel-group command is used. Enter a ? to display what you must enter next on the command line. In this example, you must enter the group keyword.Because a is not displayed, it indicates that you must enter more information to complete the command.
Table 1-2 How to Find Command Options (continued)
Command Comment1-3Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 1 Command-Line InterfaceHow to Find Command OptionsRouter(config-if)# channel-group ? Channel group number
Router(config-if)#channel-group
After you enter the group keyword, enter a ? to display what you must enter next on the command line. In this example, you must enter a channel group number from 1 to 282. Because a is not displayed, it indicates that you must enter more information to complete the command.
Router(config-if)# channel-group 1 ? mode Etherchannel Mode of the interface
Router(config-if)#
After you enter the channel group number, enter a ? to display what you must enter next on the command line. In this example, you must enter the mode keyword.Because a is not displayed, it indicates that you must enter more information to complete the command.
Router(config-if)# channel-group 1 mode ? auto Enable PAgP only if a PAgP device is detected desirable Enable PAgP unconditionally on Enable Etherchannel only
Router(config-if)#
After you enter the mode keyword, enter a ? to display what you must enter next on the command line. In this example, you must enter the auto, desirable, or on keyword.Because a is not displayed, it indicates that you must enter more information to complete the command.
Router(config-if)# channel-group 1 mode auto ?
Router(config-if)#
In this example, the auto keyword is entered. After you enter the auto keyword, enter a ? to display what you must enter next on the command line. Because a is displayed, it indicates that you can press Return to complete the command. If additional keywords are listed, you can enter more keywords or press Return to complete the command.
Router(config-if)# channel-group 1 mode autoRouter(config-if)#
In this example, press Return to complete the command.
Table 1-2 How to Find Command Options (continued)
Command Comment1-4Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 1 Command-Line InterfaceUnderstanding Command ModesUnderstanding Command ModesThe Catalyst 6500 series switch Cisco IOS user interface is divided into many different modes. The commands that are available to you depend on which mode you are currently in. You can obtain a list of commands that are available for each command mode by entering a question mark (?) at the system prompt.
When you start a session on the Catalyst 6500 series switch, you begin in user mode, often called EXEC mode. Only a limited subset of the commands are available in EXEC mode. In order to have access to all commands, you must enter privileged EXEC mode. Normally, you must enter a password to enter privileged EXEC mode. From privileged EXEC mode, you can enter any EXEC command or enter global configuration mode. Most EXEC commands are one-time commands, such as show commands, which show the current status of a given item, and clear commands, which clear counters or interfaces. The EXEC commands are not saved across reboots of the Catalyst 6500 series switch.The configuration modes allow you to make changes to the running configuration. If you later save the configuration, these commands are stored across Catalyst 6500 series switch reboots. In order to get to the various configuration modes, you must start at global configuration mode where you can enter interface configuration mode, subinterface configuration mode, and a variety of protocol-specific modes.ROM-monitor mode is a separate mode that is used when the Catalyst 6500 series switch cannot boot properly. If your Catalyst 6500 series switch or access server does not find a valid system image when it is booting, or if its configuration file is corrupted at startup, the system might enter ROM-monitor mode. Table 1-3 provides a summary of the main command modes.
Table 1-3 Summary of Main Command Modes
Command Mode Access Method Prompt Exit Method
User EXEC Log in. Router> Use the logout command.Privileged EXEC
From user EXEC mode, enter the enable EXEC command.
Router# To exit to user EXEC mode, enter the disable command.To enter global configuration mode, enter the configure terminal privileged EXEC command.
Global configuration
From privileged EXEC mode, enter the configure terminal privileged EXEC command.
Router(config)# To exit to privileged EXEC mode, enter the exit or end command or press Ctrl-Z.To enter interface configuration mode, enter an interface configuration command.
Interface configuration
From global configuration mode, enter by specifying an interface with an interface command.
Router(config-if)# To exit to global configuration mode, enter the exit command. To exit to privileged EXEC mode, enter the exit command or press Ctrl-Z.To enter subinterface configuration mode, specify a subinterface with the interface command.1-5Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 1 Command-Line InterfaceUsing the No and Default Forms of CommandsFor more information on command modes, refer to the Using the Command Line Interface chapter of the Configuration Fundamentals Configuration Guide.
Note Prior to Cisco IOS Release 12.1(11b)E, you could issue EXEC-level commands (such as show, clear, and debug commands) in EXEC mode only. In Cisco IOS Release 12.1(11b)E or later, you can issue EXEC-level Cisco IOS commands (such as show, clear, and debug commands) from within global configuration mode or other modes by issuing the do command followed by the EXEC command. See the do command for information on how to use this command.
Using the No and Default Forms of CommandsAlmost every configuration command has a no form. In general, enter the no form to disable a function. Use the command without the keyword no to reenable a disabled function or to enable a function that is disabled by default. For example, IP routing is enabled by default. To disable IP routing, specify the no ip routing command and specify ip routing to reenable it. This publication provides the complete syntax for the configuration commands and describes what the no form of a command does.Configuration commands can have a default form. The default form of a command returns the command setting to its default. Most commands are disabled by default, so the default form is the same as the no form. However, some commands are enabled by default and have arguments that are set to certain default values. In these cases, the default form of the command enables the command and sets arguments to their default values. This publication describes what the default form of a command does if the command is not the same as the no form.
Subinterface configuration
From interface configuration mode, specify a subinterface with an interface command.
Router(config-subif)# To exit to global configuration mode, enter the exit command.To enter privileged EXEC mode, enter the end command or press Ctrl-Z.
ROM monitor From privileged EXEC mode, enter the reload EXEC command. Press the Break key during the first 60 seconds while the system is booting.
Rommon> To exit ROM-monitor mode, you must reload the image by entering the boot command. If you use the boot command without specifying a file or any other boot instructions, the system boots from the default Flash image (the first image in onboard Flash memory). Otherwise, you can instruct the system to boot from a specific Flash image (using the boot system flash filename command).
Table 1-3 Summary of Main Command Modes (continued)
Command Mode Access Method Prompt Exit Method1-6Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 1 Command-Line InterfaceUsing the CLI String SearchUsing the CLI String SearchThe pattern in the command output is referred to as a string. The CLI string search feature allows you to search or filter any show or more command output and allows you to search and filter at --More-- prompts. This feature is useful when you need to sort though large amounts of output, or if you want to exclude output that you do not need to see.With the search function, you can begin unfiltered output at the first line that contains a regular expression you specify. You can then specify a maximum of one filter per command or start a new search from the --More-- prompt. A regular expression is a pattern (a phrase, number, or more complex pattern) that software uses to match against show or more command output. Regular expressions are case sensitive and allow for complex matching requirements. Examples of simple regular expressions are Serial, misses, and 138. Examples of complex regular expressions are 00210..., ( is ), and [Oo]utput.You can perform three types of filtering:
Use the begin keyword to begin output with the line that contains a specified regular expression. Use the include keyword to include output lines that contain a specified regular expression. Use the exclude keyword to exclude output lines that contain a specified regular expression.
You can then search this filtered output at the --More-- prompts.
Note The CLI string search function does not allow you to search or filter backward through previous output; filtering cannot be specified using HTTP access to the CLI.
Regular ExpressionsA regular expression can be a single character that matches the same single character in the command output or multiple characters that match the same multiple characters in the command output. This section describes how to create both single-character patterns and multiple-character patterns and how to create more complex regular expressions using multipliers, alternation, anchoring, and parentheses.
Single-Character Patterns
The simplest regular expression is a single character that matches the same single character in the command output. You can use any letter (A-Z, a-z) or digit (0-9) as a single-character pattern. You can also use other keyboard characters (such as ! or ~) as single-character patterns, but certain keyboard characters have special meaning when used in regular expressions. Table 1-4 lists the keyboard characters with special meaning.
Table 1-4 Characters with Special Meaning
Character Special Meaning
. Matches any single character, including white space.* Matches 0 or more sequences of the pattern.+ Matches 1 or more sequences of the pattern.? Matches 0 or 1 occurrences of the pattern.1-7Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 1 Command-Line InterfaceUsing the CLI String SearchTo enter these special characters as single-character patterns, remove the special meaning by preceding each character with a backslash (\). These examples are single-character patterns matching a dollar sign, an underscore, and a plus sign, respectively.\$ \_ \+ You can specify a range of single-character patterns to match against command output. For example, you can create a regular expression that matches a string containing one of the following letters: a, e, i, o, or u. One and only one of these characters must exist in the string for pattern matching to succeed. To specify a range of single-character patterns, enclose the single-character patterns in square brackets ([ ]). For example,[aeiou] matches any one of the five vowels of the lowercase alphabet, while[abcdABCD] matches any one of the first four letters of the lower- or uppercase alphabet.You can simplify ranges by entering only the end points of the range separated by a dash (-). Simplify the previous range as follows:[a-dA-D] To add a dash as a single-character pattern in your range, include another dash and precede it with a backslash:[a-dA-D\-] You can also include a right square bracket (]) as a single-character pattern in your range. To do so, enter the following:[a-dA-D\-\]] The previous example matches any one of the first four letters of the lower- or uppercase alphabet, a dash, or a right square bracket. You can reverse the matching of the range by including a caret (^) at the start of the range. This example matches any letter except the ones listed: [^a-dqsv] This example matches anything except a right square bracket (]) or the letter d:[^\]d]
^ Matches the beginning of the string.$ Matches the end of the string._ (underscore) Matches a comma (,), left brace ({), right brace (}), left parenthesis ( ( ),
right parenthesis ( ) ), the beginning of the string, the end of the string, or a space.
Table 1-4 Characters with Special Meaning (continued)
Character Special Meaning1-8Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 1 Command-Line InterfaceUsing the CLI String SearchMultiple-Character Patterns
When creating regular expressions, you can also specify a pattern containing multiple characters. You create multiple-character regular expressions by joining letters, digits, or keyboard characters that do not have special meaning. For example, a4% is a multiple-character regular expression. Put a backslash in front of the keyboard characters that have special meaning when you want to remove their special meaning.
With multiple-character patterns, order is important. The regular expression a4% matches the character a followed by a 4 followed by a % sign. If the string does not have a4%, in that order, pattern matching fails. This multiple-character regular expressiona.
uses the special meaning of the period character to match the letter a followed by any single character. With this example, the strings ab, a!, or a2 are all valid matches for the regular expression. You can remove the special meaning of the period character by putting a backslash in front of it. In the following expressiona\. only the string a. matches this regular expression.
You can create a multiple-character regular expression containing all letters, all digits, all keyboard characters, or a combination of letters, digits, and other keyboard characters. These examples are all valid regular expressions:telebit 3107 v32bis
Multipliers
You can create more complex regular expressions to match multiple occurrences of a specified regular expression by using some special characters with your single- and multiple-character patterns. Table 1-5 lists the special characters that specify multiples of a regular expression.
This example matches any number of occurrences of the letter a, including none:a*
This pattern requires that at least one letter a in the string is matched: a+
This pattern matches the string bb or bab:ba?b This string matches any number of asterisks (*):\**
Table 1-5 Special Characters Used as Multipliers
Character Description
* Matches 0 or more single- or multiple-character patterns.+ Matches 1 or more single- or multiple-character patterns.? Matches 0 or 1 occurrences of the single- or multiple-character patterns.1-9Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 1 Command-Line InterfaceUsing the CLI String SearchTo use multipliers with multiple-character patterns, you enclose the pattern in parentheses. In the following example, the pattern matches any number of the multiple-character string ab:(ab)* As a more complex example, this pattern matches one or more instances of alphanumeric pairs (but not none; that is, an empty string is not a match):([A-Za-z][0-9])+ The order for matches using multipliers (*, +, or ?) is to put the longest construct first. Nested constructs are matched from outside to inside. Concatenated constructs are matched beginning at the left side of the construct. Thus, the regular expression matches A9b3, but not 9Ab3 because the letters are specified before the numbers.
AlternationAlternation allows you to specify alternative patterns to match against a string. You separate the alternative patterns with a vertical bar or pipe (|). Exactly one of the alternatives can match the string. For example, the regular expression
codex | telebit matches the string codex or the string telebit, but not both codex and telebit.
AnchoringYou can match a regular expression pattern against the beginning or the end of the string. That is, you can specify that the beginning or end of a string contains a specific pattern. You anchor these regular expressions to a portion of the string using the special characters shown in Table 1-6.
This regular expression matches a string only if the string starts with abcd:^abcd In contrast, this expression is in a range that matches any single letter, as long as it is not the letters a, b, c, or d:[^abcd] With this example, the regular expression matches a string that ends with .12:$\.12 Contrast these anchoring characters with the special character underscore (_). The underscore matches the beginning of a string (^), the end of a string ($), parentheses ( ), space ( ), braces { }, comma (,), or underscore (_). With the underscore character, you can specify that a pattern exist anywhere in the string.
Table 1-6 Special Characters Used for Anchoring
Character Description
^ Matches the beginning of the string. $ Matches the end of the string.1-10Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 1 Command-Line InterfaceSaving Configuration ChangesFor example: _1300_ matches any string that has 1300 somewhere in the string. The strings 1300 can be preceded by or end with a space, brace, comma, or underscore. For example:{1300_ matches the regular expression, but 21300 and 13000 do not. Using the underscore character, you can replace long regular expression lists, such as the following: ^1300$ ^1300(space) (space)1300 {1300, ,1300, {1300} ,1300, (1300 with
_1300_
Parentheses for RecallAs shown in the Multipliers section on page 1-9, you use parentheses with multiple-character regular expressions to multiply the occurrence of a pattern. You can also use parentheses around a single- or multiple-character pattern to remember a pattern for use elsewhere in the regular expression.To create a regular expression that recalls a previous pattern, you use parentheses to indicate a remembered specific pattern and a backslash (\) followed by an integer to reuse the remembered pattern. The integer specifies the occurrence of the parentheses in the regular expression pattern. If you have more than one remembered pattern in your regular expression, then \1 indicates the first remembered pattern, \2 indicates the second remembered pattern, and so on. This regular expression uses parentheses for recall:
a(.)bc(.)\1\2 This regular expression matches an a followed by any character (call it character 1), followed by bc, followed by any character (character 2), followed by character 1 again, and followed by character 2 again. The regular expression can match aZbcTZT. The software remembers that character 1 is Z and character 2 is T and then uses Z and T again later in the regular expression.
Saving Configuration ChangesTo save your configuration changes to your startup configuration so that they will not be lost if there is a system reload or power outage, enter the following command:Router# copy system:running-config nvram:startup-configBuilding configuration...
It might take a minute or two to save the configuration. After the configuration has been saved, the following output appears:[OK]Router#
On most platforms, this step saves the configuration to NVRAM. On the Class A Flash file system platforms, this step saves the configuration to the location specified by the CONFIG_FILE environment variable. The CONFIG_FILE environment variable defaults to NVRAM.1-11Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 1 Command-Line InterfaceSaving Configuration Changes1-12Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Catalyst 6500 Series Switch Cisco IO78-14058-05C H A P T E R 2Cisco IOS Commands for the Catalyst 6500 Series Switches
This chapter contains an alphabetical listing of Cisco IOS commands unique to the Catalyst 6500 series switches. For information about Cisco IOS commands not contained in this publication, refer to the current Cisco IOS documentation including:
Cisco IOS Release 12.1 Configuration Fundamentals Configuration Guide Cisco IOS Release 12.1 Command Reference2-1S Command ReferenceRelease 12.1 E
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series SwitchesactionactionTo set the packet action clause, use the action command. Use the no form of this command to remove an action clause.
action {{drop [log]} | {forward [capture]} | {redirect {interface interface-number}} | {port-channel channel-id} {interface interface-number} | {port-channel channel-id} ...}
no action {{drop [log]} | {forward [capture]} | {redirect {interface interface-number}} | {port-channel channel-id} {interface interface-number} | {port-channel channel-id} ...}
Syntax Description
Defaults This command has no default settings.
Command Modes VLAN access-map submode
Command History
Usage Guidelines The interface-number argument designates the module and port number. Valid values for interface-number depend on the specified interface type and the chassis and module used. For example, if you specify a Gigabit Ethernet interface and have a 48-port 10/100BASE-T Ethernet module installed in a 13-slot chassis, valid values for the module number are from 2 to 13 and valid values for the port number are from 1 to 48.Each redirect action allows you to specify a list of up to five destination interfaces. There is also a limit of up to 255 different interface lists that can be used by redirect actions.
drop Drops the packets.log (Optional) Logs the dropped packets in software.forward Forwards (switched by hardware) the packets to its destination.capture (Optional) Sets the capture bit for the forwarded packets so that ports with
the capture function enabled also receive the packets.redirect interface Redirects packets to the specified interfaces; possible valid values are
ethernet, fastethernet, gigabitethernet, tengigabitethernet, pos, atm, and ge-wan.
interface-number Module and port number; see the Usage Guidelines section for valid values.
port-channel channel-id
Port channel to redirect traffic; see the Usage Guidelines section for valid values.
Release Modification
12.1(8a)EX Support for this command was introduced on the Catalyst 6500 series switches.
12.1(11b)E This command was changed to include the ge-wan, atm, and pos keywords.2-2Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series SwitchesactionThe redirect action supports interface lists instead of single interfaces as shown in the following example:
[...] {redirect {{ethernet | fastethernet | gigabitethernet | tengigabitethernet} slot/port} | {port-channel channel-id}}
The action clause specifies the action to be taken when a match occurs. The number of valid values for port-channel number depends on the software release. For releases prior to Release 12.1(3a)E3, valid values are from 1 to 256; for Releases 12.1(3a)E3, 12.1(3a)E4, and 12.1(4)E1, valid values are from 1 to 64. Release 12.1(5c)EX and later support a maximum of 64 values ranging from 1 to 256. Release 12.1(13)E and later support a maximum of 64 values ranging from 1 to 282; values 257 to 282 are supported on the CSM and FWSM only.The forwarded packets are subject to any applied Cisco IOS ACLs. The capture action sets the capture bit in VACL-forwarded packets. Ports with the capture function enabled can receive VACL-forwarded packets that have the capture bit set. Only VACL-forwarded packets that have the capture bit set can be captured. The log option is supported on Supervisor Engine 2 only. When the log option is specified, dropped packets are logged in software. Only dropped IP packets can be logged. The redirect option allows you to specify up to five interfaces, which can be physical interfaces or EtherChannels. An EtherChannel member is not allowed to be a redirect interface.The log and redirect keywords are not supported for VACLs on WAN interfaces.The action clause in a VACL can be forward, drop, capture, or redirect. Traffic can also be logged. VACLs applied to WAN interfaces do not support the redirect or log actions.For systems with a Supervisor Engine 1, the redirect interface must be in the redirected packets source VLAN.
For systems with a Supervisor Engine 2, the redirect interface must be in the VLAN for which the VACL map is configured. In a VLAN access map, if at least one ACL is configured for a packet type (IP, IPX, or MAC), the default action for the packet type is drop (deny).If an ACL is not configured for a packet type, the default action for the packet type is forward (permit). If an ACL for a packet type is configured and the ACL is empty or undefined, the configured action will be applied to the packet type.
Examples This example shows how to define a drop and log action: Router(config-access-map)# action drop log Router(config-access-map)#
This example shows how to define a forward action: Router(config-access-map)# action forward Router(config-access-map)#
Related Commands show vlan access-mapvlan access-map2-3Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series SwitchesapplyapplyTo implement the proposed new VLAN database, increment the database configuration number, save it in NVRAM, and propagate it throughout the administrative domain, use the apply command.
apply
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes VLAN configuration
Command History
Usage Guidelines The apply command implements the configuration changes you made after you entered VLAN database mode and uses them for the running configuration. This command keeps you in VLAN database mode.You cannot use this command when the Catalyst 6500 series switch is in the VTP client mode.You can verify that VLAN database changes occurred by entering the show vlan command in privileged EXEC mode.
Examples This example shows how to implement the proposed new VLAN database and recognize it as the current database:Router(config-if-vlan)# applyRouter(config-if-vlan)#
Related Commands abort (refer to the Cisco IOS Release 12.1 Command Reference)exit (refer to the Cisco IOS Release 12.1 Command Reference)resetshow vlanshutdown vlan (refer to the Cisco IOS Release 12.1 Command Reference)vtp
Release Modification
12.0(7)XE Support for this command was introduced on the Catalyst 6500 series switches.
12.1(1)E Support for this command on the Catalyst 6500 series switches was extended to the 12.1 E release.2-4Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series SwitchesattachattachTo remotely connect to a specific module, use the attach command.
attach num
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Usage Guidelines
Caution When you enter the attach or remote login command to access another console from your switch, if you enter global or interface configuration mode commands, the switch might reset.
The valid values for num depend on the chassis used. For example, if you have a 13-slot chassis, valid values for the module number are from 1 to 13.This command is supported on DFC-equipped modules and the supervisor engine only.When you execute the attach num command, the prompt changes to Router-dfcx# or Switch-sp#, depending on the type of module to which you are connecting.The attach command is identical to the remote login module num command.There are two ways to end this session:
You can enter the exit command as follows:Router-dfc3# exit
[Connection to Switch closed by foreign host]Router#
You can press Ctrl-C three times as follows:Router-dfc3# ^CRouter-dfc3# ^CRouter-dfc3# ^CTerminate remote login session? [confirm] y[Connection to Switch closed by local host]
num Module number; see the Usage Guidelines section for valid values.
Release Modification
12.1(5c)EX Support for this command was introduced on the Catalyst 6500 series switches.
12.1(8a)E Support for this command on the Catalyst 6500 series switches was extended to the 12.1 E release.2-5Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series SwitchesattachRouter#2-6Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series SwitchesattachExamples This example shows how to remotely log in to the DFC-equipped module:Console (enable)# attach 3Trying Switch ...Entering CONSOLE for SwitchType "^C^C^C" to end this session
Router-dfc3#
Related Commands remote login2-7Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series Switchesauto-syncauto-syncTo enable automatic synchronization of the configuration files in NVRAM, use the auto-sync command. Use the no form of this command to disable automatic synchronization.
auto-sync {startup-config | config-register | bootvar | running-config | standard}no auto-sync {startup-config | config-register | bootvar | standard}
Syntax Description
Defaults running-config
Command Modes Main-cpu redundancy mode
Command History
Usage Guidelines For releases prior to Release 12.1(13)E, the default is standard.If you enter the no auto-sync standard command, no automatic synchronizations occur. If you want to enable any of the options, you have to enter the appropriate command for each option.The auto-sync commands are not supported in RPR+ mode.
Examples This example shows how (from the default configuration) to enable automatic synchronization of the configuration register in the main CPU:Router# configure terminalRouter (config)# redundancyRouter (config-r)# main-cpuRouter (config-r-mc)# no auto-sync standardRouter (config-r-mc)# auto-sync configure-registerRouter (config-r-mc)#
startup-config Automatic synchronization of the startup configuration.config-register Automatic synchronization of the configuration register configuration.bootvar Automatic synchronization of the BOOTVAR configuration.running-config Automatic synchronization of the running configuration.standard Automatic synchronization of the startup-config, BOOTVAR, and
config-registers.
Release Modification
12.0(7)XE Support for this command was introduced on the Catalyst 6500 series switches.12.1(1)E Support for this command on the Catalyst 6500 series switches was extended to
the 12.1 E release.12.1(13)E This command was changed to include the running-config keyword and
change the default to running-config.2-8Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series Switchesauto-syncRelated Commands redundancy2-9Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series Switchesboot configboot configTo specify the device and filename of the configuration file from which the system configures itself during initialization (startup), use the boot config command. Use the no form of this command to remove the specification.
boot config {device:file-name}no boot config
Syntax Description
Defaults The configuration file is located in NVRAM.
Command Modes Global configuration
Command History
Usage Guidelines The configuration file must be an ASCII file located in the specified file system.disk0: is a Class C file system.bootflash:, slot0:, slot1:, and sup-bootflash: are Class A file systems.For Class A Flash file systems, the CONFIG_FILE environment variable specifies the file system and filename of the configuration file to use for initialization (startup). You set the CONFIG_FILE environment variable in the current running memory when you use the boot config command. This variable specifies the configuration file used for initialization (startup). When you use the boot config command, you affect only the running configuration. You must save the environment variable setting to your startup configuration to place the information under ROM monitor control and to have the environment variable function as expected. Use the copy system:running-config nvram:startup-config command to save the environment variable from your running configuration to your startup configuration.The software displays an error message and does not update the CONFIG_FILE environment variable in the following situations:
You specify nvram: as the file system, and it contains only a distilled version of the configuration. (A distilled configuration does not contain access lists.)
You specify a configuration file in the filename argument that does not exist or is not valid.
device: Device identification; valid values are bootflash:, const_nvram:, flash:, nvram:, slot0:, sup-bootflash:, or disk0:.
file-name Configuration filename.
Release Modification
12.0(7)XE Support for this command was introduced on the Catalyst 6500 series switches.
12.1(1)E Support for this command on the Catalyst 6500 series switches was extended to the 12.1 E release.2-10Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series Switchesboot configDuring initialization, the NVRAM configuration is used when the CONFIG_FILE environment variable does not exist or when it is null (such as at a first-time startup). If the software detects a problem with NVRAM or the configuration it contains, the device enters setup mode. When you use the no form of this command, the NVRAM configuration is used as the startup configuration.
You can view the contents of the BOOT, BOOTLDR, and the CONFIG_FILE environment variables using the show bootvar command. This command displays the settings for these variables as they exist in the startup configuration as well as in the running configuration if a running configuration setting differs from a startup configuration setting.The disk0: keyword is supported only on systems configured with a Supervisor Engine 2.
Examples This example shows how to set the configuration file located in the internal Flash memory to configure itself during initialization. The third line copies the specification to the startup configuration, ensuring that this specification takes effect upon the next reload.Router (config)# boot config flash:router-configRouter (config)# endRouter# copy system:running-config nvram:startup-configRouter#
Related Commands copy system:running-config nvram:startup-config (refer to the Cisco IOS Release 12.1 Command Reference)show bootvar2-11Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series SwitchescdcdTo change the default directory or file system, use the cd command.
cd [filesystem:][directory]
Syntax Description
Defaults Initial default file system is slot0:.
Command Modes EXEC
Command History
Usage Guidelines For all EXEC commands that have an optional filesystem argument, the system uses the file system specified by the cd command when you omit the optional filesystem argument. For example, the dir command, which displays a list of files on a file system, contain an optional filesystem argument. When you omit this argument, the system lists the files on the file system specified by the cd command.If you do not specify a directory on a file system, the default is the root directory on that file system.The disk0: keyword is supported only on systems configured with a Supervisor Engine 2.
Examples This example sets the default file system to the Flash PC card inserted in slot 0:Router# cd slot0:Router# pwdslot0:/
filesystem: (Optional) URL, alias of the directory, or file system followed by a colon; valid values are bootflash:, const_nvram:, flash:, nvram:, slot0:, sup-bootflash:, sup-image:, sup-slot0:, or disk0:.
directory (Optional) Name of the directory.
Release Modification
12.0(7)XE Support for this command was introduced on the Catalyst 6500 series switches.12.1(1)E Support for this command on the Catalyst 6500 series switches was extended to
the 12.1 E release.12.1(8a)EX This command was changed to support the disk0: keyword.2-12Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series SwitchescdRelated Commands copy (refer to the Cisco IOS Release 12.1 Command Reference)delete (refer to the Cisco IOS Release 12.1 Command Reference)dir (refer to the Cisco IOS Release 12.1 Command Reference)mkdir disk0:pwd (refer to the Cisco IOS Release 12.1 Command Reference)show file system (refer to the Cisco IOS Release 12.1 Command Reference)undelete2-13Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series Switchescd2-14Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series Switcheschannel-group
2-15Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
2 278-14058-05channel-groupTo assign and configure an EtherChannel interface to an EtherChannel group, use the channel-group command. Use the no form of this command to remove the channel-group configuration from the interface.
channel-group number mode {active | on | {auto [non-silent]} | {desirable [non-silent]} | passive}
no channel-group number
Syntax Description
Defaults No channel groups are assigned.
Command Modes Interface configuration
Command History
number Specifies the channel group number; see the Usage Guidelines section for valid values.
mode EtherChannel mode of the interface.active Enables LACP unconditionally.on Enables EtherChannel only. auto Places a port into a passive negotiating state in which the port responds to
PAgP packets it receives but does not initiate PAgP packet negotiation.non-silent (Optional) Used with the auto or desirable mode when traffic is expected
from the other device. desirable Places a port into an active negotiating state in which the port initiates
negotiations with other ports by sending PAgP packets.passive Enables LACP only if an LACP device is detected.
Release Modification
12.0(7)XE Support for this command was introduced on the Catalyst 6500 series switches.
12.1(1)E Support for this command on the Catalyst 6500 series switches was extended to the 12.1 E release.
12.1(3a)E3 The number of valid values for number was changed; see the Usage Guidelines section for valid values.
12.1(5c)EX Two restrictions were added regarding DFC-equipped modules; see the Usage Guidelines section for additional information.
12.1(11b)EX This command was changed to support LACP.12.1(13)E This command was changed to support the configuration of Layer 2
EtherChannels that include interfaces on different DFC-equipped switching modules. CSCdt27074
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series Switcheschannel-groupUsage Guidelines The number of valid values for the channel-group number depends on the software release. For releases prior to Release 12.1(3a)E3, valid values are from 1 to 256; for Releases 12.1(3a)E3, 12.1(3a)E4, and 12.1(4)E1, valid values are from 1 to 64. Release 12.1(5c)EX and later support a maximum of 64 values ranging from 1 to 256. Release 12.1(13)E and later support a maximum of 64 values ranging from 1 to 282; values 257 to 282 are supported on the CSM and FWSM only.The channel group number is global and is shared between all the channeling protocols. If a specific channel number is used for the PAgP-enabled interfaces of a channel group, that same channel number cannot be used for configuring a channel that has LACP-enabled interfaces or vice versa.Entering the auto or desirable keyword enables PAgP on the specified interface; the command will be rejected if it is issued on an LACP-enabled interface.The active and passive keywords are valid on PAgP-disabled interfaces only.You can change the mode for an interface only if it is the only interface designated to the specified channel group. The on keyword forces the bundling of the interface on the channel without any negotiation.You can manually configure a switch with PAgP on one side and LACP on the other side in the on mode. With the on mode, a usable EtherChannel exists only when a port group in on mode is connected to another port group in on mode. If you enter this command on an interface that is added to a channel with a different protocol (than the protocol you are entering), the command is rejected. If the interface belongs to a channel, the no form of this command is rejected.All ports in an EtherChannel must use the same protocol; you cannot run two protocols on one module. PAgP and LACP are not compatible; both ends of a channel must use the same protocol. You can change the protocol at any time, but this change causes all existing EtherChannels to reset to the default channel mode for the new protocol. Configure all ports in an EtherChannel to operate at the same speed and duplex mode (full duplex only for LACP mode).On systems configured with nonfabric-enabled modules and fabric-enabled modules, you can bundle ports across all modules, but those bundles cannot include a DFC-equipped module port.You do not have to create a port channel interface before assigning a physical interface to a channel group. A port channel interface is created automatically when the channel group gets its first physical interface, if it is not already created.You do not have to disable the IP address that is assigned to a physical interface that is part of a channel group, but it is highly recommended.You can create both Layer 2 and Layer 3 port channels by entering the interface port-channel command or when the channel group gets its first physical interface assignment. The port channels are not created at runtime or dynamically.Any configuration or attribute changes you make to the port channel interface are propagated to all interfaces within the same channel group as the port channel (for example, configuration changes are also propagated to the physical interfaces that are not part of the port channel but are part of the channel group).
Caution Do not enable Layer 3 addresses on the physical EtherChannel interfaces. Assigning bridge groups on the physical EtherChannel interfaces causes loops in your network. 2-16Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series Switcheschannel-groupFor a complete list of guidelines, refer to the Configuring EtherChannel section of the Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide.
Examples This example shows how to add EtherChannel interface 1/0 to the EtherChannel group specified by port-channel 1:Router(config-if)# channel-group 1 mode on Router(config-if)#
Related Commands interface port-channelshow interfaces port-channel (refer to the Cisco IOS Release 12.1 Command Reference)2-17Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series Switcheschannel-protocolchannel-protocolTo set the protocol used on an interface to manage channeling, use the channel-protocol command. Use the no form of this command to deselect the protocol.
channel-protocol {lacp | pagp}no channel-protocol
Syntax Description
Defaults pagp
Command Modes Interface configuration
Command History
Usage Guidelines This command is not supported on systems configured with a Supervisor Engine 1.You can also select the protocol using the channel-group command.If the interface belongs to a channel, the no form of this command is rejected.All ports in an EtherChannel must use the same protocol. PAgP and LACP are not compatible; both ends of a channel must use the same protocol. You can change the protocol at any time, but this change causes all existing EtherChannels to reset to the default channel mode for the new protocol. You can use the channel-protocol command to restrict anyone from selecting a mode that is not applicable to the selected protocol.Configure all ports in an EtherChannel to operate at the same speed and duplex mode (full duplex only for LACP mode).For a complete list of guidelines, refer to the Configuring EtherChannel section of the Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide.
lacp Specifies LACP to manage channeling.pagp Specifies PAgP to manage channeling.
Release Modification
12.1(11b)EX Support for this command was introduced on the Catalyst 6500 series switches.
12.1(13)E Support for this command on the Catalyst 6500 series switches was extended to the 12.1 E release. This command was changed to support the entry of the no channel-protocol command (without arguments) to deselect the protocol.2-18Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series Switcheschannel-protocolExamples This example shows how to select LACP to manage channeling on the interface:Router(config-if)# channel-protocol lacpRouter(config-if)#
Related Commands channel-groupshow etherchannel2-19Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series Switchesclass-mapclass-mapTo access the QoS class map configuration mode to configure QoS class maps, use the class-map command. Use the no form of this command to delete a class map.
class-map name [match-all | match-any]no class-map name [match-all | match-any]
Syntax Description
Defaults When you do not specify the match-all or match-any option, the default is match-all.
Command Modes Global configuration
Command History
Usage Guidelines You apply the class-map command and its subcommands on a per-interface basis to define packet classification, marking, aggregate, and flow policing as part of a globally named service policy. After you are in QoS class map configuration mode, these configuration commands are available:
exitUsed to exit from QoS class map configuration mode. noUsed to remove a match statement from a class map. matchUsed to configure classification criteria.
These optional match subcommands are available: access-group {acl-index | acl-name} ip {dscp | precedence} value1 value2 ... value8
These subcommands appear in the CLI help but are not supported on LAN interfaces or WAN interfaces on the OSMs:
input-interface {{interface interface-number} | {null number} | {vlan vlan-id}} protocol linktype destination-address mac mac-address source-address mac mac-address
name Class map name.match-all (Optional) Matches all match criteria in the class map.match-any (Optional) Matches one or more match criteria.
Release Modification
12.0(7)XE Support for this command was introduced on the Catalyst 6500 series switches.
12.1(1)E Support for this command on the Catalyst 6500 series switches was extended to the 12.1 E release.2-20Catalyst 6500 Series Switch Cisco IOS Command ReferenceRelease 12.1 E
78-14058-05
-
Chapter 2 Cisco IOS Commands for the Catalyst 6500 Series Switchesclass-mapPFC QoS does not support these subcommands: input-interface {{interface interface-number} | {null number} | {vlan vlan-id}} protocol linktype destination-address mac mac-address source-address mac mac-address qos-group group-value
If you enter these subcommands, PFC QoS does not detect the unsupported keywords until you attach a policy map to an interface. When you try to attach the policy map to an interface, you get an error message. For additional information, refer to the Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide and the Cisco IOS Command Reference publications.After you have configured the class map name and are in class map configuration mode, you can enter the match subcommands. The syntax for these subcommands is as follows:
match {[{access-group acl-index} | acl-name] | [{ip dscp} | {precedence value}]}See Table 2-1 for a syntax description of the match subcommands.
Examples This example shows how to access the class-map commands and subcommands, configure a class map named ipp5, and enter a match statement for ip precedence 5:Router# configure terminalEnter configuration commands, one per line. End with CNTL/Z.Router(config)# class-map ipp5Router(config-cmap)# match ip precedence 5Router(config-cmap)#
This example shows how to configure the class map to match an already configured access list:Router(config-cmap)# match access-group IPacl1Router(config-cmap)#
Related Commands policy-mapshow class-mapshow policy-mapshow policy-map interface
Table 2-1 match Syntax Description
Optional Subcommand Description
access-group acl-index | acl-name
Specifies the access list index or access list names; valid access list index values are from 1 to 2699.
access-group acl-name
Specifies the named access list.
ip dscp value1 value2 ... value8
Specifies IP DSCP values to match; valid values are from 0 to 63. Enter up to 8 DSCP values separated by white spaces.
ip precedence value1 value2 ... value8