catalogue Thermex 2019 - Công ty CN SEILAR Việt Nam
Transcript of catalogue Thermex 2019 - Công ty CN SEILAR Việt Nam
THERMEX SOLUTION P/L16/165 WALDRON RD CHESTER HILL NSW 2162
AUSTRALIA ABN 61150461573
CATALOGUE 2019
P/L
TECHNICAL DATA Designed, manufactured and engineered in Australia
Thermex’s range of heat pumps are designed and manufactured in Australia for both local and international markets. Thermex’s manufacturing resources have over 50 year of experience in manufacturing heat pumps and refrigeration products.
All Thermex’s heat pumps are manufactured from the highest quality components supplied from the industry’s leading suppliers and designed for high effectiency and low maintenance
All Thermex’s evaporators are coated in Blygold PoluAI XT - MB which is a special corrosion protection coating for cooling coils and evaporators. The coating shields vulnerable metals from aggressive environments. The aluminum content in the coating provides the necessary heat con ductivity to ensure the that coated heat exchangers have optimum heat transfer capacity.
Special additives ensure the applied coating lm is bacterial and fungi resistant. After treating evaporators or cooling coils these articles should be considered “treated articles” and be marked as such.
Corrosion resistant
Micro organism resistant
Heat conductive
11000 hours salt spray test
Nano free
Treated article
�
�
�
�
�
�
�
�
ASTM B117 – 11000 hours salt spray test
ASTM G85 A1 – 4000+ hours acid salt spray test
The coating is compliant to
Evaporator Coating
THERMEX heat pumps are designed to be provide reliable hot water for any application year-round. Made from rugged stainless steel and using the industries’ leading supplier the THERMEX heat pump is built for years of trouble free service
All unit come with – as standard features
Stainless Steel chassis
Single wall plate heat exchanger
condensers Electronic controller
Hot gas injection for defrost function when
required
High effectiency scroll compressors
Advanced evaporator design for high
effectciency and low refrigerant charge
R134a refrigerant to allow high water
temperatures to be achieved with ease Flow switch to protect the condenser
5 Year warranty on the compressor and the condenser
Staging for up to 8 heat pumps
Phase failure protection
Enable relay for the primary pump
Thermex heat pumps use leading edge evaporator technology on its air forced units. The advanced coil pattern has 7mm tube diameter which is the smallest in the market and the equilateral tube arrangement which creates equal distances between each tube and the six adjacent tubes.
These features result in more tubes per n cross section and this means more primary surface area – the result is higher capacity and lower refrigerant charge
�
�
�
�
�
�
�
�
�
�
�
�
Evaporator Design
Ambient operation range -5 < 45 degreeC
Ambient operation range -5 < 45 degreeC
TECHNICAL DATA Designed, manufactured and engineered in Australia
Model – 30kW 50hz
10° C AmbientConditions
50°C Supply
60°C Supply
70°C Supply
20° C AmbientConditions
50°C Supply60°C Supply70°C Supply
27.2
25.74
24.8
31.3530.6928.08
6.6
6.6
14.3
14.3
3.9
4.65
Heat output KW Power input KW Current draw A/ph COP
30° C AmbientConditions
Motor data
Compressor max current draw - ACompressor - HPFan size – mmFan current draw – A/PhFan wiringNoise rating – dB
Water CircuitWater ttingsPressure drop across unit - dP
Refrigeration circuitRefrigerant charge per circuit – kgNo. refrigerant circuits
19.085002.74Star Y61
1 1/2” FBSP66
3.51
Minimum ow across unit- l/s
Oil charge- per circuit - kg 6.0
1.0
Comp in-rush current - ARated load amps - A No. FansFan power draw - kW
3Air ow - m /hrNo.poles - fan
9813.910.6361004
50°C Supply60°C Supply70°C Supply
36.332.6732.4
6.6 14.3 4.95
Model – 50kW 50hz
10° C AmbientConditions
50°C Supply60°C Supply70°C Supply
20° C AmbientConditions
50°C Supply60°C Supply70°C Supply
42.6740.9540.02
49.0050.3547.00
10.5
10.6
19.8
19.8
3.9
4.75
Heat output KW
30° C AmbientConditions
Motor data
Compressor MCC - ACompressor - HPFan size – mmFan current draw – A/PhFan wiringNoise rating – dB
32.0125005.4Star Y65
Locked rotor amps – ARated load amps - A No. FansFan power draw - kW
3Air ow - m /hrNo.poles - fan
14522.921.26130004
Water CircuitWater ttingsPressure drop across unit - dP
Refrigeration circuitRefrigerant charge per circuit – kgNo. refrigerant circuits
1 1/2” FBSP47
3.5
1
Minimum ow across unit- l/s
Oil charge- per circuit - kg
1.6
6.5
50°C Supply60°C Supply70°C Supply
57.4254.7052.65
10.7 19.8 5.1
Power input KW Current draw A/ph COP
TECHNICAL DATADesigned, manufactured and engineered in Australia
Model – 60kW 50hz
10° C AmbientConditions
50°C Supply60°C Supply70°C Supply
20° C AmbientConditions
50°C Supply60°C Supply70°C Supply
52.0249.8048.24
65.205 9.6656.7
12.3
12.6
23.0
23.0
4.05
4.75
Heat output KW Power input KW
30° C AmbientConditions
Motor dataCompressor MCC - ACompressor - HPFan size – mmFan current draw – A/PhFan wiringNoise rating – dB
32.0154501.8Star Y63
Water CircuitWater ttingsPressure drop across unit - dP
Refrigeration circuitRefrigerant charge per circuit – kgNo. refrigerant circuits
1 1/2” FBSP51
3.5
1
Minimum ow across unit- l/s
Oil charge- per circuit - kg
1.6
6.5
Locked rotor amps – ARated load amps - A No. FansFan power draw - kW
3Air ow - m /hrNo.poles - fan
1752620.9110004
50°C Supply60°C Supply70°C Supply
70.3867.0064.80
12.8 23.1
6.95.4
Model – 80kW 50hz
10° C AmbientConditions
50°C Supply60°C Supply70°C Supply
20° C AmbientConditions
50°C Supply60°C Supply70°C Supply
69.867.6465.16
85.9480.2874.12
16.7
16.9
29.5
29.7
4.05
4.75
Heat output KW Power input KW
30° C AmbientConditions
Motor data
Compressor MCC - ACompressor - HPFan size – mmFan current draw – A/PhFan wiringNoise rating – dB
50.020.05002.7Star Y66
Locked rotor amps – ARated load amps - A No. FansFan power draw - kW
3Air ow - m /hrNo.poles - fan
21535.721.3142004
Water CircuitWater ttingsPressure drop across unit - dP
Refrigeration circuitRefrigerant charge per circuit – kgNo. refrigerant circuits
2” FBSP52
6.0
Minimum ow across unit- l/s
1
2.5
Oil charge- per circuit - kg 7.0
50°C Supply60°C Supply70°C Supply
96.5389.7886.03
17.1 29.9 5.25
Current draw A/ph COP
Current draw A/ph COP
Ambient operation range -5 < 45 degreeC
Ambient operation range -5 < 45 degreeC
Ambient operation range -5 < 45 degreeC
TECHNICAL DATA Designed, manufactured and engineered in Australia
Model – 90kW 50hz
10° C AmbientConditions
50°C Supply60°C Supply70°C Supply
20° C AmbientConditions
50°C Supply60°C Supply70°C Supply
87.7283.4383.25
106.299.2895.76
20.6
20.9
37.0
37.4
4.05
4.75
Heat output KW Power input KW
30° C AmbientConditions
Motor data
Compressor MCCCompressor - HPFan size – mmFan current draw – A/PhFan wiringNoise rating – dB
Water CircuitWater ttingsPressure drop across unit - dP
Refrigeration circuitRefrigerant charge per circuit – kg
69.0255002.7Star Y66
2” FBSP52
Minimum ow across unit- l/s 3.0
7.0 Oil charge- per circuit - kg 7.0
Locked rotor amps – ARated load amps - A No. FansFan power draw - kW
3Air ow - m /hrNo.poles - fan
27049.321.3142004
50°C Supply60°C Supply70°C Supply
119.475111.825107.88
21.3 37.9 5.25
Model – 110kW 50hz
10° C AmbientConditions
50°C Supply60°C Supply70°C Supply
20° C AmbientConditions
50°C Supply60°C Supply70°C Supply
103.95100.898.25
121.77112.53108.88
24.0
24.2
44.6
44.6
4.2
4.65
Heat output KW Power input KW
30° C AmbientConditions
Motor data
Compressor MCC - ACompressor - HPFan size – mmFan current draw – A/PhFan wiringNoise rating – dB
Water CircuitWater ttingsPressure drop across unit - dP
Refrigeration circuitRefrigerant charge per circuit – kg
32.0306302.4Star Y63
2” FBSP49
Minimum ow across unit- l/s 3.5
6.5 Oil charge- per circuit - kg 6.5
Locked rotor amps – ARated load amps - A No. FansFan power draw - kW
3Air ow - m /hrNo.poles - fan
17526.021.2160006
50°C Supply60°C Supply70°C Supply
139.59130.68126.72
24.2 44.8 5.4
Current draw A/ph COP
Current draw A/ph COP
Ambient operation range -5 < 45 degreeC
Ambient operation range -5 < 45 degreeC
TECHNICAL DATA Designed, manufactured and engineered in Australia
Model – 150kW
50hz
10° C Ambient
Conditions
50°C Supply
60°C Supply
70°C Supply
20° C Ambient
Conditions
50°C Supply
60°C Supply
70°C Supply
139.59
135.27
130.32
161.88
152.1
148.23
33.4
33.8
59.0
59.4
4.05
4.5
Heat output
KW
Power input
KW
30° C Ambient
Conditions
Motor data
Compressor MCC - A
Compressor - HP
Fan size – mm
Fan current draw – A/Ph
Fan wiring
Noise rating – dB
Water Circuit
Water ttings
Pressure drop across unit - dP
Refrigeration circuit
Refrigerant charge per circuit – kg
50.0
40
500
5.4
Star Y
69
2” FBSP
52
Minimum ow across unit- l/s
6.0 Oil charge- per circuit - kg 7.0
Locked rotor amps – A
Rated load amps - A
No. Fans
Fan power draw - kW
3Air ow - m /hr
No.poles - fan
215
35.7
4
2.6
28400
4
5.0
50°C Supply
60°C Supply
70°C Supply
193.05
179.55
181.35
34.2 59.8 5.25
Current draw
A/ph
COP
DIMENSIONS
TECHNICAL DATADesigned, manufactured and engineered in Australia
All operational heating capacity, power consumption and current draw data shown above is based on
the heat pump operating at the limit of its design and is intended to be an indication only.
THERMEX’s product range is subject to change without notice
Each unit will be individually designed to customer requirements and a detailed product specication will
be supplied at time of order including installation instructions and dimensions. The power consumed by
the unit and the current it will draw vary depending on how the unit is constructed. The units performance
may also vary slightly from the gures above again based on customer requirements.
Model
THW30AV
THW50AV
THW60AV
THW80AV
580
680
680
810
THW90AV
THW110AV
THW150AV
810
860
2000
1060
1500
1500
1900
1900
1960
2000
A B C D E Shipping weight No. per container
1140
1250
1250
1400
1400
1675
1400
150
204
204
225
225
225
225
300
354
354
375
375
375
375
160
170
180
250
280
350
620
20
8
8
7
7
7
3