Catalogue Raasm
Transcript of Catalogue Raasm
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 1/419
FLUIDS AND LUBRICATION
EQUIPMENT
Catalogue
No. 2171st September 2006
Made in Italy
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 2/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 3/419
founded in 1975
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 4/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 5/419
General view of RAASM Area in San Zeno di Cassola - Vicenza
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 6/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 7/419
RAASM premises in San Zeno di Cassola - Vicenza
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 8/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 9/419
RAASM branch in Romano d’Ezzelino - Vicenza
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 10/419
USE
air • water • oil • greases • antifreeze • diesel oil •
detergents and allied products • industrial andchemical fluids, paints, etc.
specialists in the production of
OPERATIONS
transfer and siphoning of fluids
(for a wide range of deliveries and pressures)
lubrication • greasing
bleeding of brakes and clutches
spraying • tyre inflatinggraphiting • washing • fixed systems
mobile systems • etc.
SECTORS:
repair garages • service stations • mechanical industry
automobile industry • chemical industry
tanning industry • wood industry
marble industry • manufacturing industry in general
agriculture • building • road works
boating • aircraft • civil and military airports
railway sector • mining sector
armed forces • mobile workshops and other
EQUIPMENT
FOR FLUIDS AND LUBRICANTS
RAASM products (made in Italy)
are highly versatile and easy to use.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 11/419
CONTINUITY AND
CONSTANCY
RESEARCH
AND DESIGN
SUPPLIES
SELECTION
PRODUCTION
TECHNOLOGIES
ENTHUSIASM
PROFESSIONALISM
INTERPERSONAL
RELATIONS
COMMUNICATION
SERVICE FLEXIBILITY
EXPERTISE
QUALITY IS A COMBINATION OF AND CARE TO MANY SMALL BUT IMPORTANT DETAILS
GUARANTEE AND LASTING RELIABILITY
MADE IN ITALY
working for TOMORROW,TODAY
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 12/419
The starting point for the entire production cycle is theresearch and design of new solutions that will becomecutting-edge products.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 13/419
Mechanical and electronic testing of
projects that become a concrete reality.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 14/419
High precision dies developed in partnership with specialist companies, using cutting edge technology.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 15/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 16/419
Highly automated robotised welding islands, with different
positions for covering all thetypes of our products, to
guarantee high precision results.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 17/419
Welding quality is guaranteed by:
- the material used - precise torch positioning - control of temperature
The control of welding quality is guaranteed by:- a high-tech robot - an appropriate welding programme- an absolute control of position and...
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 18/419
... testing and a complete visual check of all welds of each product.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 19/419
The painting is guaranteed byinnovative systems with lead
and heavy metal-free non-toxic polyester resin for exteriors, with average thickness of 80 µ.The painting is highlyresistant to atmospheric
agents and impacts.The painted products undergo“saline mist resistance”corrosion testing according toUNI 9227 standards.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 20/419
Computerised laser cutting enables the execution of complex workrequiring extreme precision.Bending press with electronic programmer, for working sheet with
an absolute control of bending to ensure a high quality standard.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 21/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 22/419
Turning, with state of the art machinery, as a result of continuing investment. Allowing the manufacture of complex components.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 23/419
Numerical control work centres. Machines that guaranteetop quality for the production of high-precision pieces.
Control room for better quality.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 24/419
The excellence of the die-castings is ensured by the consistent quality of the castings obtained by means of computerised control of the presses and castings during the course of production.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 25/419
Robotised injection moulding of components in thermoplastic material with subsequent structural inspection of the moulded pieces.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 26/419
Automated vertical store complete withtravelling lift for storage and handlingof material...
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 27/419
... a static structure for a dynamic system.Control is carried out by means of companymanagement software, offering efficiency and maximum flexibility.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 28/419
Industrial pump assembly department organised to make a product ready for the final testing phase where all the pumps are completely andindividually checked according to internal procedures with calibrated measuring instruments.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 29/419
Assembly departments for products ready for end-use.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 30/419
The packaging department prepares the products with packaging suitable for specific protection requirements.This phase includes a further visual check of each article.
The carefully packaged products are sent to the
warehouse which provides for shipments in Italy and
to other countries where the RAASM brand is present.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 31/419
Customer service: a dedicated team of qualified technicians are available, to support customers and solve any
possible problems.
A single aim: CUSTOMER SATISFACTION
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 32/419
For a more efficient customer service, RAASM periodically organisesrefresher courses for its partners, for better knowledge of the products.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 33/419
RAASM... other moments, with museum areas open to schools and the organisation of particular events open tothe public.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 34/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 35/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 36/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 37/419
BRAKE BLEEDING - WASHING - INFLATING
WASTE OIL SUCTION/DRAINERS
AIR OPERATED PUMPS
FOR DISTRIBUTION OF OIL AND SIMILAR
MANUAL OIL AND GREASE PUMPS
HOSE REELS AND ACCESSORIES
Index Families
AIR OPERATED PUMPS
FOR DISTRIBUTION OF GREASE
INFORMATION ON AIR OPERATED PUMPS ANDSYSTEMS
TROLLEYS - SERVICE COLUMNS
INDUSTRIAL PUMPS - HOISTS
SPECIAL DRAINERS
10
2
3
4
5
6
7
8
9
I n d e x
page 47to 61
page 63to 101
page 103to 111
page 113to 127
page 129to 149
page 151to 234
page 237to 267
page 269to 282
page 285to 329
page 331to 409
1
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 38/419
Index Articles
Code Page Code Page Code Page
33082
33083
33094
33096
33/101160
33/10126033100
33110
33112
33113
33114
33115
33116
33117
33118
33119
33120
33121
3312233123
33124
33125
33126
33127
33128
33129
33130
33135
33140
33150
33151
3315233153
33160
33161
33170
33171
33172
33173
33194
33196
33200
33210
33250
3327033271
33272
33273
33274
33275
33276
33300
33360
33396
33426
33427
33434
3344033500
33501
33510
33520
33530
33550
162
162
163
163
157
156184
188
226
226
403
224
226-403
226-403
226
226-403
210
212
223223
187
186
186-226
186-226
403
403
403
187
216
218-222
218
218218-326
165
165
164
164
164
164
165
165
184
188
179
403403
403
403
403
226
226
159
158
158
228
227
224
159-223156
201
184
179
188
186
Code Page
10/09
10/10
10/11
10/12
10/13
10/1410/15
10/17
10/18
10/20
10/22
10/23
10/24
10/50
10/51
10/52
10/55
10/56
10/5710/60
10/61
10/62
10/65
10/66
10/67
10/80
10/81
10/82
10/85
10105
10205
1020710705
10801
10802
10805
10807
11000/A
11000/B
11000/C
11000/D
11000/E
11000/F
11000/G
11000/H11000/I
11000/K
11000/L
11000/M
11000/P
11000/R
11000/T
11000/U
11000/W
11000/X
11000/Y
11000/Z
1100111002
11003
11003/1
11003/2
11003/3
11003/4
323
225-322
225-322
225-322
225-322
323224-323
323
225-323
234-325
234-325
234-325
234-325
260-324
260-324
260-324
324
324
324258-325
258-325
258-325
325
325
325
327
327
261-328
329
48
48
4849
51
51
49
49
50
50
50
50
50
50
50
5050
50
50
50
50
50
50
50
50
50
50
50
5050
51
51
51
51
51
51
51
51
51
51
51329
307
308
315
306
315
307
308
312
311
306
307
308312
311
312
311
321
316
317
317
313
313
318
319
31954
54
55
55
54
54
55
55-116
160
160
160
115
118115
114
114
116
116
116
118
118
114-120
120
120
163
163163
163
163
163
162
162
227
227
225
225
205-326
205-326205-326
161
161
161
166
166
167
167
167
167
167
172
173174
175
176
177
180
181
182
183
185
178
178
178
194194
195
195
190
168
168
169
169
169
169
169
194
194195
195
190
191
191
189
189
189
197
194
196
197
196197
196
193
192
193
192
11003/5
11003/6
11003/7
11003/8
11003/9
1100411/60
115D/121
115D/181
115D/31
115D/91
115DV/31
115F/121
115F/181
115F/401
115F/751
115F/91
116F/121
116F/181116F/401
116F/751
117F/401
117F/751
120D/91
150D/41
150D/61
150DV/61
151F/701
152F/701
180D/51
180D/81
180DV/8122017
22024
23024
23025
24801
24805
24806
24891
26090
26091
26094
30050
3005130200
31200
31201
32016
32024
32065
32067
32068
32712
33016
33024
33060
3306133070
33071
33072
33073
33080
33081
33581
33582
33590
33591
33701
3370333705
35060
35061
35094
35160
35161
35163
35173
35176
35194
35196
35200
3521035220
35250
35265
35270
35275
35276
35280
35281
35285
35290
35293
35296
3531035312
35320
35322
35330
36060
36061
36063
36073
36076
36094
36096
36310
3631236320
36322
36330
36340
36350
36420
36430
36530
36601
36602
36610
36611
3662036621
36630
36641
36650
36651
36660
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 39/419
36661
36670
36675
36910
36912
3692036930
37100
37150
37200
37500
37650
37670
37675
37676
37679
37680
37681
3768237683
37685
37686
37687
37688
37689
37690
37691
37692
37693
37694
37695
3769737698
37699
37701
37703
37711
37712
37713
37714
37715
37717
37718
37720
3772237725
37726
37727
37735
37736
37737
37740
37741
37742
37743
37744
37745
3774637747
37748
37749
37750
37751
37752
193
192
192
203
203
203203
172
173
174
175
176
177
180
181
183
182
202
202200
185
198
198
198
198
198
198
202
202
202
201
200200
200
204
206
204
211
211
213
213
213
211
206
204211
211
211
213
213
213
214-220
214
214
214
215
215
215215
215
215
216-221
216
216
37765
37766
37767
37771
37772
3777337801
37810
37811
37812
37814
37815
37816
37817
38010
38011
38012
38013
3801538016
38017
38018
38020
38021
38022
38023
38024
38025
38026
38027
38028
3802938030
38031
38032
38034
38035
38037
38038
38039
38040
38042
38043
38046
3804738051
38052
38055
38062
38063
38065
38070
38071
38072
38073
38075
38076
3807738078
38084
38085
38086
38087
38088
217
217
217
217
217
217264
264
264
229-264
264
264
264
229-264
220
220
220
220
220220
220
220
212-220
212
212
210-220
210
210
228
227
228
221221
221
221
221
221
222
222
222
222
224
224
224
224224
224
227
220
221
222
226
226-403
226-403
226
226
226
226226
232
232
232
232
232
38089
38090
38091
38092
38093
3809538096
38097
38098
38099
38100
38102
38105
38120
38121
38210
38211
39100
3920039202
39210
39220
39221
39230
39240
39260
39261
39264
39265
39266
39267
3926839280
39281
39282
39284
39285
39286
39287
39289
39290
39304
39307
39314
3931739320
39321
39322
39324
39328
39351
39352
39901
39902
42000
42050
42059
4206042061
42062
42063
42064
42065
42066
233
234
226
234
233
229229
229
229
229
229
202
202
403
403
228
228
146
147147
147
146-147
146-147
146-147
147
149-231
149-231
149
149
149
149
149230
230
231
231
231
231
231
231
231
277
277
273
27399
279
279
275
275
281
281
282
282
66
66
64
6464
64
70
70
68
72
42069
42070
42072
42073
42088
4208942090
42091
42101
42102
42103
42113
42114
42115
42116
42160
42164
42170
4221543016
43024
43060
43065
43090
43091
43114
43115
43116
43190
43724
43760
4376543790
44060
44065
44066
44067
44090
44091
44092
44093
44115
44116
44117
4411845100
45110
45111
45150
45180
45200
45250
45280
45290
45291
45292
45300
4531045311
45498
45499
45500
45501
45502
65
65
65
65
70
7068
72
74
74
74
70
70
68
72
110
110
110
11079
79
80
82
80
82
80
82
106
106
108
108
108108
84
86
88
88
84
86
88
88
84
86
88
8897
97
97
96
96
104
104
104
104
104
104
98
9999
100
100
100
100
100
Index Articles
Code Page Code Page Code Page Code Page
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 40/419
66860
66880
66881
66882
66888
6688966891
66892
66893
66895
66896
66897
66899
68012
68113
68213
70365
70809
8003580040
80050
80200
80201
8380.100
8380.101
8380.102
8380.200
8380.201
8380.202
8380.300
8380.301
8380.3028380.350
8380.351
8380.352
8380.400
8380.401
8380.402
8380.500
8380.501
8380.502
8381.201
8381.301
8381.351
8382.1008382.101
8382.102
8382.200
8382.201
8382.202
8382.300
8382.301
8382.302
8382.350
8382.351
8382.352
8382.401
8382.4028382.500
8382.501
8382.502
8383.201
8383.301
8383.351
266
267
267
267
266
266262
262
262-403
262
262
262
266
122
122
123
56
56
270270
270
271
271
342
342
342
350
350
350
356
356
356360
360
360
372
372
372
380
380
380
350
356
360
343343
343
351-373
351
351
357
357
357
361
361
361
373
373381
381
381
351
357
361
Code Page Code Page Code Page Code Page
45504
45505
45506
45515
45516
4551745518
45526
45527
45528
45538
45539
45540
45550
45551
45552
45560
45570
4606446065
46114
46115
46116
46215
52010
52013
52015
52020
52024
53016
53024
6028060310
60311
60410
60411
60450
60451
61280
61310
61311
61410
61411
62041
6204862074
62095
63041
63048
63074
63095
64000
64000/65
64000/75
64020
64021
64024
6402564030
64031
64032
64033
64033/40
64034
100
100
100
100
100
100100
100
100
100
100
100
100-106
101-109
101-109
106
100
101
9090
91
91
92
94
60
58
59
58
59
59
59
124124
124
126
126
126-262
126-262
125
125
125
127
127
238
238238
238
239
239
239
239
242
242
242
251
251
250
250251
251
249
249
249
248
64035
64036
64037
64038
64038/65
6403964039/65
64040
64041
64041/65
64042
64042/65
64063
64064
64064/65
64070
64070/65
64070/75
6414564146
64147
64150
64151
64155
64156
64195
64196
64197
64200
64201
64210
6421164510
64512
64520
64522
65138
65142
65160
65280
65309
65310
65311
65350
6538565420
65600
66265
66310
66340
66370
66400
66590
66599
66661
66663
66739
6674066741
66742
66743
66855
66856
66857
248
248
246
246
246
247247
244
244
244
245
245
244
244
244
243
243
243
256256
256
252
252
253
253
257
257
257
254
254
255
255265
265
265
265
229-324
229-324
229-324
260
260
260
260
260
260260
260
258
258
258
258
258
258
263
262
262
263
263263
263
263
266
267
267
8390.100
8390.101
8390.102
8390.200
8390.201
8390.2028390.300
8390.301
8390.302
8390.350
8390.351
8390.352
8390.400
8390.401
8390.402
8390.500
8390.501
8390.502
8391.2018391.301
8391.351
8392.100
8392.101
8392.102
8392.200
8392.201
8392.202
8392.300
8392.301
8392.302
8392.350
8392.3518392.352
8392.401
8392.402
8392.500
8392.501
8392.502
8393.201
8393.301
8393.351
8420.100
8420.101
8420.102
8420.1038420.104
8420.200
8420.201
8420.202
8420.300
8420.301
8420.302
8420.350
8420.351
8420.352
8420.400
8420.401
8420.4028420.500
8420.501
8420.502
8420.505
8420.506
8420.700
340
340
340
348
348
348354
354
354
358
358
358
370
370
370
378
378
378
348354
358
341
341
341
349-371
349
349
355
355
355
359
359359
371
371
379
379
379
349
355
359
342
342
342
342342
350
350
350
356
356
356
360
360
360
372
372
372380
380
380
380
380
391
Index Articles
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 41/419
8420.701
8420.702
8420.800
8420.801
8420.802
8420.8038420.804
8421.202
8421.302
8421.352
8422.100
8422.101
8422.102
8422.103
8422.104
8422.201
8422.202
8422.301
8422.3028422.351
8422.352
8422.401
8422.402
8422.500
8422.501
8422.502
8422.505
8422.506
8423.202
8423.302
8423.352
8424.1018424.102
8424.201
8424.202
8424.300
8424.301
8424.302
8424.350
8424.351
8424.352
843001
843002843005
843006
8430.100
8430.101
8430.102
8430.103
8430.104
8430.200
8430.201
8430.202
8430.300
8430.301
8430.3028430.350
8430.351
8430.352
8430.400
8430.401
8430.402
391
391
393
393
393
393393
350
356
360
343
343
343
343
343
351
351
357
357361
361
373
373
381
381
381
381
381
351
357
361
363363
351-363
365-373
365
365
357-367
367
367
361-369
369
369
394
394395
395
340
340
340
340
340
348
348
348
354
354
354358
358
358
370
370
370
8430.500
8430.501
8430.502
8430.505
8430.506
8430.7008430.701
8430.702
8430.800
8430.801
8430.802
8430.803
8430.804
8431.202
8431.302
8431.352
8432.100
8432.101
8432.1028432.103
8432.104
8432.201
8432.202
8432.301
8432.302
8432.351
8432.352
8432.401
8432.402
8432.500
8432.501
8432.5028432.505
8432.506
8433.202
8433.302
8433.352
8434.101
8434.102
8434.201
8434.202
8434.300
8434.3018434.302
8434.350
8434.351
8434.352
8440.100
8440.101
8440.102
8440.103
8440.104
8440.400
8440.401
8440.402
8440.5008440.501
8440.502
8440.505
8440.506
845001
845005
378
378
378
378
378
390390
390
392
392
392
392
392
348
354
358
341
341
341341
341
349
349
355
355
359
359
371
371
379
379
379379
379
349
355
359
362
362
349-362
364-371
364
364
355-366
366366
359-368
368
368
344
344
344
344
344
374
374
374
382382
382
382
382
394
395
8450.100
8450.101
8450.102
8450.103
8450.104
8450.4008450.401
8450.402
8450.500
8450.501
8450.502
8450.505
8450.506
8520.100
8520.101
8520.102
8520.200
8520.201
8520.2028520.300
8520.301
8520.302
8520.350
8520.351
8520.352
8520.400
8520.401
8520.402
8520.500
8520.501
8520.502
8520.7008520.701
8520.702
8520.703
8520.704
8520.705
8520.800
8520.801
8520.802
8520.803
8520.804
8521.202
8521.302
8521.3528522.100
8522.101
8522.102
8522.201
8522.202
8522.301
8522.302
8522.351
8522.352
8522.401
8522.402
8522.500
8522.5018522.502
8523.202
8523.302
8523.352
8524.101
8524.102
344
344
344
344
344
374374
374
382
382
382
382
382
342
342
342
350
350
350356
356
356
360
360
360
372
372
372
380
380
380
391391
391
391
391
391
393
393
393
393
393
350
356
360343
343
343
351
351
357
357
361
361
373
373
381
381381
351
357
361
363
363
8524.201
8524.202
8524.300
8524.3018524.302
8524.350
8524.351
8524.352
853001
853002
853005
853006
8530.100
8530.101
8530.102
8530.200
8530.2018530.202
8530.300
8530.301
8530.302
8530.350
8530.351
8530.352
8530.400
8530.401
8530.402
8530.500
8530.501
8530.5028530.601
8530.602
8530.700
8530.701
8530.702
8530.703
8530.704
8530.705
8530.800
8530.801
8530.802
8530.803
8530.8048531.202
8531.302
8531.352
8532.100
8532.101
8532.102
8532.201
8532.202
8532.301
8532.302
8532.351
8532.352
8532.4018532.402
8532.500
8532.501
8532.502
8532.601
8532.602
351-363
365-373
365
365
357-367
367367
361-369
369
369
394
394
395
395
340-386
340
340
348
348348
354
354
354
358
358
358
370
370
370
378
378
378386
386
390
390
390
390
390
390
392
392
392
392
392348
354
358
341-387
341
341
349
349
355
355
359
359
371371
379
379
379
387
387
Code Page Code Page Code Page Code Page
Index Articles
8424.200
8434.200
8524.200
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 42/419
8533.202
8533.302
8533.352
8534.101
8534.102
8534.201
8534.202
8534.300
8534.301
8534.302
8534.350
8534.351
8534.352
854001
854002
854005
8540068540.100
8540.101
8540.102
8540.103
8540.105
8540.106
8540.200
8540.201
8540.202
8540.203
8540.205
8540.206
8540.3008540.301
8540.350
8540.351
8540.400
8540.401
8540.402
8540.403
8540.405
8540.406
8540.500
8540.501
8540.601
8540.6028540.603
8540.700
8540.701
8540.702
8540.703
8540.704
8540.705
8540.706
8540.707
8540.708
8540.709
8540.800
8540.8018540.802
8541.202
8541.301
8541.351
8542.100
8542.101
349
355
359
362
362
349-362364-371
364
364
355-366
366
366
359-368
368
368
394
394
395
395340-386
340
340
340
340
340
348
348
348
348
348
348
354354
358
358
370
370
370
370
370
370
378
378
386
386386
390
390
390
390
390
390
390
390
390
390
392
392392
348
354
358
341-387
341
8542.102
8542.103
8542.105
8542.106
8542.201
8542.2028542.203
8542.206
8542.301
8542.351
8542.401
8542.402
8542.403
8542.406
8542.500
8542.501
8542.601
8542.602
8542.6038543.202
8543.301
8543.351
8544.101
8544.102
8544.103
8544.106
8544.201
8544.202
8544.203
8544.206
8544.300
8544.301
8544.350
8544.351
8550.100
8550.101
8550.102
8550.103
8550.105
8550.106
8550.2008550.201
8550.202
8550.203
8550.205
8550.206
8550.300
8550.301
8550.350
8550.351
8550.400
8550.401
8550.402
8550.4038550.405
8550.406
8550.500
8550.501
8550.700
8550.701
341
341
341
341
349
349349
349
355
359
371
371
371
371
379
379
387
387
387349
355
359
362
362
362
362
349-362
364-371
364
364
364
349-362364-371
364
355-366
366
359-368
368
342
342
342
342
342
342
350350
350
350
350
350
356
356
360
360
372
372
372
372372
372
380
380
391
391
8550.702
8550.703
8550.704
8550.705
8550.706
8550.7078550.708
8550.709
8550.800
8550.801
8550.802
8551.202
8551.301
8551.351
8552.100
8552.101
8552.102
8552.103
8552.1058552.106
8552.201
8552.202
8552.203
8552.206
8552.301
8552.351
8552.401
8552.402
8552.403
8552.406
8552.500
8552.5018553.202
8553.301
8553.351
8554.101
8554.102
8554.103
8554.106
8554.201
8554.202
8554.203
8554.206
8554.300
8554.301
8554.350
8554.351
856001
856002
8560.100
8560.101
8560.103
8560.104
8560.1058560.106
8560.107
8560.108
8560.109
8560.200
8560.201
391
391
391
391
391
391391
391
393
393
393
350
356
360
343
343
343
343
343343
351
351
351
351
357
361
373
373
373
373
381
381351
357
361
363
363
363
363
351-363
365-373
365
365
365
351-363365-373
365
357-367
367
361-369
369
394
394
340-386
340
340
340
340340
340
340
340
348
348
8560.203
8560.204
8560.205
8560.206
8560.207
8560.2088560.209
8560.300
8560.301
8560.302
8560.350
8560.351
8560.352
8560.400
8560.401
8560.403
8560.404
8560.405
8560.4068560.407
8560.408
8560.409
8560.601
8560.602
8560.603
8560.604
8560.605
8562.100
8562.101
8562.103
8562.104
8562.1058562.106
8562.107
8562.108
8562.109
8562.201
8562.203
8562.204
8562.205
8562.207
8562.208
8562.209
8562.301
8562.3028562.351
8562.352
8562.401
8562.403
8562.404
8562.405
8562.407
8562.408
8562.409
8562.601
8562.602
8562.603
8562.6048562.605
8564.101
8564.103
8564.104
8564.105
8564.107
348
348
348
348
348
348348
354
354
354
358
358
358
370
370
370
370
370
370370
370
370
386
386
386
386
386
341-387
341
341
341
341341
341
341
341
349
349
349
349
349
349
349
355
355359
359
371
371
371
371
371
371
371
387
387
387
387387
362
362
362
362
362
Code Page Code Page Code Page Code Page
Index Articles
8534.200
8544.200
8554.200
8554.205
8544.205
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 43/419
8564.108
8564.109
8564.201
8564.2038564.204
8564.205
8564.207
8564.208
8564.209
8564.300
8564.301
8564.302
8564.350
8564.351
8564.3528617.100
8617.101
8617.102
8617.103
8617.104
8617.105
8617.106
8617.107
8617.108
8617.200
8617.201
8617.202
8617.2038617.204
8617.205
8617.206
8617.207
8617.208
8617.400
8617.401
8617.402
8617.403
8617.404
8617.405
8617.406
8617.4078617.408
8617.500
8617.501
8617.502
8617.503
8617.600
8617.601
8617.602
8617.603
8617.604
8617.605
8617.606
8617.6078618.100
8618.101
8618.102
8618.103
8618.104
8618.105
362
362
349-362
364-371
364
364364
364
349-362
364-371
364
364
364
355-366
366
366
359-368
368
368346
346
346
346
346
346
346
346
346
352
352
352
352352
352
352
352
352
376
376
376
376
376
376
376
376376
384
384
384
384
388
388
388
388
388
388
388
388347-389
347
347
347
347
347
8618.106
8618.107
8618.108
8618.200
8618.201
8618.2028618.203
8618.204
8618.205
8618.206
8618.207
8618.208
8618.400
8618.401
8618.402
8618.403
8618.404
8618.405
8618.4068618.407
8618.408
8618.500
8618.501
8618.502
8618.503
8618.601
8618.602
8618.603
8618.604
8618.605
8637.100
8637.1018637.102
8637.103
8637.104
8637.105
8637.106
8637.107
8637.108
8637.109
8637.110
8637.200
8637.201
8637.202
8637.2038637.204
8637.205
8637.206
8637.207
8637.208
8637.209
8637.210
8637.400
8637.401
8637.402
8637.403
8637.404
8637.4058637.406
8637.407
8637.408
8637.409
8637.410
8637.500
347
347
347
353
353
353353
353
353
353
353
353
377
377
377
377
377
377
377377
377
385
385
385
385
389
389
389
389
389
346
346346
346
346
346
346
346
346
346
346
352
352
352
352352
352
352
352
352
352
352
376
376
376
376
376
376376
376
376
376
376
384
8637.501
8637.502
8637.503
8637.504
8637.505
8637.6008637.601
8637.602
8637.603
8637.604
8637.605
8637.606
8637.607
8637.608
8637.609
8637.610
8638.100
8638.101
8638.1028638.103
8638.104
8638.105
8638.106
8638.107
8638.108
8638.109
8638.110
8638.200
8638.201
8638.202
8638.203
8638.2048638.205
8638.206
8638.207
8638.208
8638.209
8638.210
8638.400
8638.401
8638.402
8638.403
8638.404
8638.405
8638.4068638.407
8638.408
8638.409
8638.410
8638.500
8638.501
8638.502
8638.503
8638.504
8638.505
8638.601
8638.602
8638.6038638.604
8638.605
88630
88650
88651
89001
384
384
384
384
384
388388
388
388
388
388
388
388
388
388
388
347-389
347
347347
347
347
347
347
347
347
347
353
353
353
353
353353
353
353
353
353
353
377
377
377
377
377
377
377377
377
377
377
385
385
385
385
385
385
389
389
389389
389
203-265
397
397
60-338
89010
89011
89109
89110
90C/111
90C/5190C/71
90D/111
90D/21
90D/51
90D/71
90DV/21
90F/111
90F/451
90F/51
90F/71
91C/111
91C/701
91C/7191F/111
91F/451
91F/71
92C/111
92C/71
92F/451
95D/61
971.011
971.102
971.111
973.913
973.917
973.920973.925
973.930
973.935
974.912
974.915
974.920
974.925
974.930
974.935
974.1015
974.1020
974.1024
974.1028974.1030
975.902
975.915
975.920
975.925
975.927
975.1002
975.1012
975.1018
975.1022
975.1027
975.1030
985.606985.612
985.618
985.620
985.625
985.630
985.640
338
338
339
339
304
170-301171-302
305
314
301
303
314
305
240-309
170-301
171-303
304
241-310
171-302305
240-309
171-303
305
303
309
320
405
404
405
409
409
409409
409
409
409
409
409
409
409
409
409
409
409
409409
404
409
409
409
409
404
409
409
409
409
409
404407
407
407
407
407
407
Code Page Code Page Code Page Code Page
Index Articles
8564.200
8564.206
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 44/419
985.650
985.906
985.912
985.918
985.920
985.925985.930
985.940
985.950
986.106
986.110
986.115
986.120
986.125
986.130
986.140
986.150
986.160
986.406986.410
986.415
986.420
986.425
986.430
986.440
986.450
986.460
987.115
987.120
987.130
987.140
987.415987.420
987.430
987.440
988.106
988.115
988.120
988.130
988.406
988.415
988.420
988.430
9910.315
9910.3209910.325
9910.330
9911.306
9911.310
9911.315
9911.320
993.201
993.202
407
404
407
407
407
407407
407
407
404
406
406
406
406
406
406
406
406
404407
407
407
407
407
407
407
407
406
406
406
406
407407
407
407
404
406
406
406
404
407
407
407
409
409409
409
404
409
409
409
404
404
993.502
993.504
993.511
993.512
993.516
993.518994.512
994.517
994.612
994.712
994.717
994.812
995.206
995.211
995.212
995.217
995.218
995.312
995.313995.317
995.318
995.412
995.506
995.512
995.518
995.520
995.525
995.530
995.540
995.550
995.606
995.618995.625
995.630
995.701
995.702
995.706
995.710
995.715
995.720
995.725
995.730
995.806
995.812
995.818995.820
995.825
995.830
995.840
995.850
995.906
995.918
995.925
404
404
408
408
408
408406
406
406
406
406
406
404
405
405
405
405
408
405408
405
405
404
406
406
406
406
406
406
406
404
406406
406
404
404
404
408
408
408
408
408
404
406
406406
406
406
406
406
404
406
406
995.930
996.210
996.215
996.220
996.225
996.230996.240
996.250
996.260
996.270
996.280
996.290
996.2100
996.301
996.302
996.304
996.306
996.310
996.311996.315
996.316
996.320
996.321
996.325
996.326
996.330
996.331
996.340
996.341
996.350
996.351
996.360996.361
996.370
996.371
996.380
996.381
996.390
996.391
996.399
996.3100
996.406
996.415
996.425
996.706996.730
996.740
996.750
996.760
996.770
996.780
996.790
996.7100
406
405
405
405
405
405405
405
405
405
405
405
405
404
404
404
404
408
405408
405
408
405
408
405
408
405
408
405
408
405
408405
408
405
408
405
408
405
405
408
404
405
405
404408
408
408
408
408
408
408
408
996.806
996.820
996.825
997.215
997.220
997.230997.240
997.250
997.260
997.315
997.320
997.330
997.340
997.350
997.360
997.420
997.505
997.515
997.520997.530
997.540
997.550
997.560
997.815
997.820
997.830
997.835
997.840
997.850
997.860
998.215
998.220998.230
998.240
998.315
998.320
998.330
998.340
998.406
998.501
998.502
998.506
998.515
998.520
998.530998.540
998.806
998.815
998.820
998.830
998.840
404
409
409
405
405
405405
405
405
405
405
405
405
405
405
405
404
408
408408
408
408
408
409
409
409
409
409
409
409
405
405405
405
405
405
405
405
404
404
404
404
408
408
408408
404
409
409
409
409
Code Page Code Page Code Page Code Page
Index Articles
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 45/419
81401
81411
81417
81501
81507
8151081511
81512
81514
81601
81610
81615
81701
81712
81716
81718
81719
81720
8180781812
81818
82001
82007
82010
82011
82012
82014
82100
82110
82115
82201
8221182217
82301
82310
82315
82316
82319
82320
8430.300
8430.301
8430.302
8430.400
8430.104
8430.1018430.102
8430.401
8430.402
8430.500
8430.501
8430.502
8434.300
8432.301
8433.302
8432.302
8434.200
8433.202
8432.1048432.101
8432.102
8420.400
8420.104
8420.101
8420.102
8420.401
8420.402
8420.500
8420.501
8420.502
8420.300
8420.3018420.302
8424.300
8422.301
8422.302
8423.302
8424.200
8423.202
82407
82412
82418
83101
83107
8311083111
83112
83114
83201
83210
83215
87201
87225
87401
87417
87620
87625
8771487715
87720
88201
88220
88225
88320
88325
88401
88414
88415
88420
88501
8852588526
88601
88627
88701
88717
88801
88814
8422.104
8422.101
8422.102
8440.400
8440.104
8440.1018440.102
8440.401
8440.402
8440.500
8440.501
8440.502
8520.300
8520.302
8540.200
8541.202
8522.101
8522.102
8542.4038542.401
8542.402
8520.400
8520.101
8520.102
8520.401
8520.402
8540.400
8540.403
8540.401
8540.402
8524.300
8522.3028523.302
8524.200
8523.202
8544.200
8543.202
8540.100
8540.603
88815
88820
89101
89111
89112
8920189215
89216
89217
89220
89221
89301
89320
89324
89325
89326
89327
89330
8933189335
89336
89400
89401
89500
89501
90100
90114
91200
91202
91204
91210
9121591216
91220
91225
91226
91315
91320
91325
8540.601
8540.602
8420.700
8420.702
8420.701
8520.7008520.703
8520.705
8520.701
8520.702
8520.704
8540.700
8540.707
8540.701
8540.704
8540.708
8540.709
8540.702
8540.7058540.703
8540.706
8424.300
8424.200
8524.300
8524.200
998.506
998.315
996.306
996.302
996.304
996.310
996.315996.415
996.320
996.325
996.425
996.215
996.220
996.225
91400
91402
91404
91412
91418
9340593415
93420
93700
93712
93718
93912
93918
93925
93926
96102
96111
98113
9811798120
98125
98130
98135
98212
98215
98220
98225
98230
98235
98302
98315
9832098325
98327
99115
99120
99200
99215
995.706
993.502
993.504
993.512
993.518
997.505997.315
997.320
995.506
995.212
995.218
995.512
995.518
995.525
995.625
971.102
971.111
973.913
973.917973.920
973.925
973.930
973.935
974.912
974.915
974.920
974.925
974.930
974.935
975.902
975.915
975.920975.925
975.927
997.815
997.820
998.806
998.815
Conversion Table Articles Hose Reels and Hoses
Ex New Ex New Ex New Ex New
The conversion only concerns the articles codes, whereas the product remains unchanged.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 46/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 47/419
BRAKE BLEEDING - WASHING - INFLATING 47047
BRAKE-CLUTCH BLEEDING 110page 48
PRESSURE SPRAYERS page 54
page 56WASHING TANK
page 58TYRE INFLATOR
1
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 48/419
BRAKE-CLUTCH BLEEDING EQUIPMENT48010048048048048
Art. 10105 ( l 5 )
Art. 10205 ( l 5 )
Art. 10207 ( l 5 )
The simplified air-operatedtwo-chamber brake bleedingdevice is suitable for bleeding the
hydraulic brakes and clutches ofall motor vehicles.Bleeding can be carried out in afew minutes by just one person.The brake-bleeding device isequipped with an elastic innermembrane which hermeticallyseparates the oil from the air, thusavoiding the risk of emulsion.It is also suitable for systems withbraking control and ABS(max. at 1 bar).
Tankcapacity 5 l
Air oiltank
elastic membrane
Filler capwith reserve indicator
Air “expansion” tank(low pressure)
The brake-bleeding device is equipped with an elastic inner membrane (3) which hermetically separates the oil contained in the oil tank (1) , from the air contained in the air “expansion” tank ( 2) , thus avoiding the risk of emulsion(working pressure 1 - 2 bar controllable on the upper pressure gauge).
The oil tank (4) filler cap is equipped with a “reserve indicator” that signals when the fluid is finishing, and an air venting valve to be used in the device activation phase.
BRAKE-BLEEDING SECTION
with two chambers
Tank capacity (upper chamber)
Oil max working pressure (lower chamber)
Delivery hose length
Safety valve (max pressure)
5 l
2 bar
3 m
3 bar
TECHNICAL TABLE
1
2
3
4
No. 1 packing m 3 0,070 kg 8,5
No. 1 packing m 3 0,070 kg 9,7
Art. 10105Two-chamber brake-clutch bleeding device, complete with:- Art. 10801 two collection containers- filler funnel
Art. 10205
Two-chamber brake-clutch bleeding device, complete with:- Art. 11001 set of plugs (see page 50)
- Art. 10802 clutch bleeding tube- Art. 10801 two collection containers- filler funnel
Art. 10207
Two-chamber brake-clutch bleeding device, complete with:- Art. 11004 set of plugs (see page 51)
- Art. 10802 clutch bleeding tube- Art. 10801 two collection containers- filler funnel
No. 1 packing m 3 0,070 kg 9,5
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 49/419
BRAKE-CLUTCH BLEEDING EQUIPMENT
Art. 10705 ( l 5 )
Art. 10805 ( l 5 )
Art. 10807 ( l 5 )
Tankcapacity 5 l
The brake-bleeding device is equipped with an elastic inner membrane (2) which hermetically separates the oil contained in the oil tank (1) , from the air contained in the air “expansion” tank (5) , thus avoiding the risk of emulsion.
It is also equipped with a third air reserve tank (high pressure air 8-10 bar) (6) which, delivered by means of a pressure regulator (3) , enables several bleeding operationsto be carried out at a constant pressure without having to recharge the device.
The oil tank (4) filler cap is equipped with a “reserve indicator” that signals when the fluid is finishing, and an air venting valve to be used in the device activation phase.
The air-operated three-chamberbrake bleeding device is suitablefor bleeding the hydraulic brakes
and clutches of all motor vehicles.The pressurised (8 - 10 bar) airreserve chamber enables severalbleeding operations to be carriedout without having to rechargethe device.The brake-bleeding device isequipped with an elastic innermembrane which hermeticallyseparates the oil from the air, thusavoiding the risk of emulsion. It isalso suitable for systems withbraking control and ABS (max. at 1bar).
BRAKE-BLEEDING SECTION
with three chambers
Air oiltankelastic membrane
Tank capacity (upper chamber)
Oil max working pressure (middle chamber)
Reserve tank max pressure (lower chamber)
Delivery hose length
Safety valve (max pressure)
5 l
2 bar
10 bar
3 m
10 bar
TECHNICAL TABLE
1
2
3
4
5
6
49010149049049049
Art. 10705Three-chamber brake-clucth device, complete with:- Art. 10801 two collection containers- filler funnel
Art. 10805
Three-chamber brake-clutch bleeding device, complete with:- Art. 11001 set of plugs (see page 50)
- Art. 10802 clutch bleeding tube- Art. 10801 two collection containers- filler funnel
Art. 10807
Three-chamber brake-clutch bleeding device, complete with:- Art. 11004 set of plugs (see page 51)
- Art. 10802 clutch bleeding tube- Art. 10801 two collection containers- filler funnel
No. 1 packing m 3 0,070 kg 10,2
No. 1 packing m 3 0,070 kg 11,2
No. 1 packing m 3 0,070 kg 11,4
Air “reserve” tank(high pressure)
Air “expansion” tank
(low pressure)
Filler capwith reserve
indicator
Pressure regulator
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 50/419
SCREW CONNECTION PLUGS
Universal plug W with 3 tapered plugs:
1) ø 20 mm2) ø 28 mm
3) ø 45 mm
50050
Note: To choose the connection plug see the “Brake bleeder plug list” tables (refer to page 53)
Art. 11001
Art. 11002
Art. 11002
Series of special screw connection plugs, consinting of:11000/B/C/E/G/H/K/L/M/P/R/U/X/Y/Z
Note: The series of special plugs is only supplied by request
LIST OF SCREW PLUGS SUPPLIABLE INDIVIDUALLY
11000/A type A 25
11000/B type B 21,5
11000/C type C 26,5
11000/D type D 43
11000/E type E 48
11000/F type F 52,5
11000/G type G 64
11000/H type H 41,5
11000/I type I 59
11000/K type K 61,5
11000/L type L 76,5
11000/M type M 68,5
11000/P type P 77
11000/R type R 33,5
11000/T type T 44
11000/U type U 76
11000/X type X 44,5
11000/Y type Y 34,5
11000/Z type Z 58,5
A A
APPLICATION EXAMPLES OFUNIVERSAL PLUG 11000/W
11000/W
Art. 11001
Series of standard screw connection plugs, supplied with Art. 10205 or Art. 10805 ( refer to page. 48 - 49 ), consisting of:- 5 screw plugs: 11000/A/D/F/I/T- 1 universal plug 11000/W
Note: the above plugs can also be supplied individually. The
universal plug W can be used on many types of cars and trucks in addition to those given in the plug list (refer to page 53)
ArticlePlug
seriesDiameter (A)
mm ArticlePlug
seriesDiameter (A)
mm
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 51/419
PRESSURE CONNECTION PLUGS 51051
11003/1 pressure
11003/2 pressure 42,8
11003/3 pressure
11003/4 pressure 56,0
11003/5 pressure 65,7
11003/6 pressure 74,2
11003/7 pressure 58,8
11003/8 pressure 33,7
11003/9 pressure 35,8
Art. 11004
Adjustable universal bracket (Art.11003) with series ofpressure plugs 11003/1/2/3/4/5/6/7/8/9
10801Brake fluid collection containers,complete with transparent tubeand 90° flexible attachment forconnection to the bleeder valve.
10802
Clutch bleeding connection tube,length 600 mm.
11003
Adjustable universal bracket forpressure plugs.
Art. 11004
Note: Po choose the connection plug see the “Brake bleeder plug list” tables (refer to page 53)
LIST OF PRESSURE PLUGS SUPPLIABLE INDIVIDUALLY
42,542,2
54,053,8
APPLICATION EXAMPLES OFUNIVERSAL PRESSURE PLUGS
A
Plugseries
Diameter (A)mm Article Article
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 52/419
52052 BLEEDING OPERATIONS
BRAKING SYSTEM BLEEDING PHASE
TRUCK CLUTCH SYSTEM BLEEDING PHASE
PROCEDURES FOR APPLYING THE CONNECTION PLUGS
Fill the brake fluid reservoir by means of the quick-release connector. Apply the required connection plug on the reservoir. Connect the brake bleeding device by means of the quick-releaser connector. Pressurise the braking system to approximately. 2 bar and proceed with the bleeding operation. For vehicles with ABS the max. pressure is 1 bar.
Note: Start bleeding from the rear wheels especially if the vehicle is equipped with a braking control.
The bleeding of hydraulic clutches of trucks must be carried out by inverting the connections with respect to the brake bleedingoperation. Connect the brake bleeder device to the clutch bleeder valve. Apply the required connection plug on the clutch fluid reservoir. Connect the collection container to the required connection plug by means of the special tube.
Before bleeding it is important to fill the brake fluid reservoir by means of the
brake bleeder quick-release connector.
The extended nozzle of the plug must be immersed in the fluid to avoid sprays or air and oil emulsions.
Connect the brake bleeding deviceto the reservoir by means of the
quick-release connector.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 53/419
53053 LIST OF BRAKE BLEEDER PLUGS
Note: The vehicles on which bleeding operations with standard series plugs Art. 11001 can be carried out are highlighted (in yellow)
A B C D E F G H I K L M P R T U X Z W u n i v e r s a l
p l u g
List of screw plugs 11000 / List of pressureplugs 11003 /
ALFA
AUDI
AUSTIN MORRIS
AUTOBIANCHI
BMW
CITROEN
CHRYSLER
DAEWOO
FERRARI
FIAT
FORD
HONDA
HYUNDAI
INNOCENTI
JAGUAR
JEEP
KIA LAMBORGHINI
LADA
LANCIA
LAND ROVER
LEXUS
LEYLAND
MASERATI
MITSUBISHI
MAZDA
MERCEDES
MG
NISSAN
OPEL
PEUGEOTPORSCHE
RENAULT
ROVER
SAAB
SEAT
SUBARU
SUZUKI
TALBOT
TOYOTA
TRIUMPH
VAUXHALL
VOLKSWAGEN
VOLVO
Important:
The above pressure
plugs can replace the
majority of screw
plugs, as well as the
universal plug W, for
cars and trucks.
ASTRA
BEDFORD
BERLIET
DAF
EBRO
FIAT
FORD
IVECO
MAGIRUS
MERCEDES
PEGASO
RENAULT
SAVIEM
SCANIA
UNIC
VOLVO
Car model
List of screw plugs 11000 / Trucks
A B C D E F G H I K L M P R T U X Z W
1 2 3 4 5 6 7 8 9
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 54/419
NON-TOXIC PRESSURE SPRAYERS54054
Art. 22017 ( l 16 )
Art. 22024 ( l 24 )
Devices for the non-toxic sprayingof low viscosity detergent liquids,such as lubrication oils and similar.
Suitable for washing motorvehicles, graphiting, lubricating,delivering dismantling oils, etc.Filled to 3/4 their capacity with therequired liquid and pressurised withair at 6-8 bar, they workindependently without requiringcontinuous connection to thecompressed air line.
Caution: Do not use with flammable or corrosive liquids
EXAMPLES OF USE
painted steel
Art. 24805
Standard spray gun with EPDM seals
Art. 22017Portable pressure sprayer with 16-litre tank, equipped with:- level gauge- Art. 24891 antisplash funnel
Art. 22024
Wheel-mounted pressure sprayer with 24-litre tank,
equipped with:- level gauge- Art. 24891 antisplash funnel
Art. 24801
Standard spray nozzle (equippedwith filter) with delivery of approx.1 - 1.5 l/min.
No. 1 packing m 3 0,080 kg 9,8
No. 1 packing m 3 0,090 kg 13
Spraying antioxidant, oil,diesel oil on mechanical parts
Spraying detergent for washing engines
Spraying detergents or protective products for machine tools
Spraying detergent for washing cars and trucks
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 55/419
STAINLESS STEEL NON-TOXIC PRESSURE SPRAYERS 55055
Art. 23024 ( l 24 )
Art. 23025 ( l 24 )
Devices for stainless steel forthe non-toxic spraying of lowviscosity liquids such as
detergents, lubrication oils andsimilar.Suitable for spraying disinfectantsfor agriculture, animal breeding,gardening, food, etc.Filled to 3/4 their capacity with theliquid and pressurised with air at6-8 bar, they work independentlywithout requiring continuousconnection to the compressedair line.
EXAMPLES OF USE
stainless steel AISI 304
Art. 23024Painted stainless steel wheel-mounted pressure sprayerwith 24-litre tank, equipped with:- level gauge- Art. 24891 antisplash funnel
Art. 23025
Stainless steel wheel-mounted pressure sprayer with
24-litre tank, equipped with:- level gauge- Art. 24891 antisplash funnel
No. 1 packing m 3 0,090 kg 12,8
No. 1 packing m 3 0,090 kg 12,8
Art. 24891
Funnel with antisplash rim to preventthe liquid from spilling out when filling thetank.
Important: The stainless steel pressure sprayer can also beused with acid-base products such as sulphuric, nitric, muriatic, phosphoric acid. Make sure to choose a product that does not tend to separate and with a dilution percentage not exceeding15 - 20%
Art. 24806
Stainless steel standard spray gun with EPDM seals
Spraying of detergent or disinfectant in placescontaining food
Spraying of detergentfor washing engines
Spraying of detergent in slaughter-houses
Spraying of detergentfor washing public places
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 56/419
56056 WASHING TANK
Art. 70365 ( l 65 )
Universal washing tank for quickwashing of mechanical parts andcomponents in general. The low-
pressure pneumatic systemenables:- continuous liquid detergent flowwith brush for thorough washing- washing by dipping, with theparts dipped in the liquid detergentin the tank.
1 0 6 0
2 0 0
660 510
600
Tank capacity
Washing tank capacity
Max working pressure
Required quantity of liquid
Max blowing gun pressure
65 l
50 l
0,5 bar
50 l
12 bar
Article 70365
OVERALL DIMENSIONS
removablecover
Art. 70365Universal washing tank with removable cover fitted onthe 65-litre wheel-mounted tank. Two spare brushes Art. 70809 are supplied with the washing tank
Art. 70809
Knurled bristle brush forfacilitating removal of dirt
No. 2 packing m 3 0,290 kg 47,1
Important: Do not use corrosive liquids with flashpoint below55°C, that can give off toxic and harmful fumes.Use specific chemical products for washing mechanical parts, according to the instructions supplied by the manufacturer.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 57/419
57057 DETAILS AND ADVANTAGES
The possibility of collecting liquid in the tank guarantees the following advantages:
- easy moving of tank without risk of liquid spilling out - no evaporation of liquid during idle periods- easy recovery of old liquid - decanting of the product inside the tank for always having a clean liquid
For correct use , add 48 - 52 litres
of detergent liquid
The pneumatic systemsworks at low pressure 0.5 bar ,
consuming very little air
Draining cock
Washing with brush,with continuous liquid flow
Dip washing,with parts placed in the tank
Decanting filter/screen
Brush or dip wash management unit
Total emptying plug(under the tank)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 58/419
PORTABLE TYRE INFLATOR58058
OVERALL DIMENSIONS
Art. 52013 ( l 13 )
9 0 0
- 9 5 0
250
300
Type-approved tyre inflator forchecking and restoring thepressure of any type of tyre.
The 13-litre tank is equipped withan automatic charging device foralways being ready for use(indispensable and handy at servicestations).
The tyre inflation anddeflating operations are done with single3-position lever
idle
deflate
inflate
310
7 7 0
In order to have the tyre inflator always ready for use, just place it on the automatic charger as shown in the illustration
INSTALLATION MEASURES
automatic
automaticcharger
1
2
3
1
2
3
Note: Type-approved for public use
EECapprovalcertificate
Art. 52013Type-approved automatic charging tyre inflator with13-litre tank equipped with:
- type-approved pressure gauge ø 80 mm- Art. 52020 automatic charger
Art. 52020 Automatic charger for tyre inflator
No. 1 packing m 3 0,088 kg 8,8
Pressure gauge ø 80 mm, type-approved,supplied with the inflating group
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 59/419
PORTABLE TYRE INFLATORS 59059
OVERALL DIMENSIONS
Tyre inflator for checking andrestoring the pressure of any typeof tyre.
The 13 and 24-litre tanks are withstandard charging.Tyre pressure checking andinflation operations are carried outwith the gun equipped withpressure gauge ø 60 mm withscale 0 - 10 bar.
Art. 52024 ( l 24 )
Art. 53024 ( l 24 )
Art. 52015 ( l 13 )
Art. 53016 ( l 13 ) )
6 0 0
310 280
8 6 0
standard
Note: Not type-approved for public use
Art. 52015Standard charging portable tyre inflator with 13-litre tankequipped with:- gun with pressure gauge ø 60 mm
Art. 53016Standard charging wheel-mounted tyre inflator with13-litre tank equipped with:- gun with type-approved pressure gauge ø 60 mm
Art. 52024
Standard charging wheel-mounted tyre inflator with24-litre tank equipped with:
- gun with pressure gauge ø 60 mm
Art. 53024
Standard charging wheel-mounted tyre inflator with24-litre tank equipped with:
- gun with type-approved pressure gauge ø 60 mm
No. 1 packing m 3 0,088 kg 6,5 No. 1 packing m 3 0,088 kg 6,5
No.1 packing m 3 0,090 kg 10 No. 1 packing m 3 0,090 kg 10
Pressure gauge ø 60 mm, not type-approved,supplied with the inflating gun
Pressure gauge ø 60 mm, type-approved,supplied with the inflating gun
Tyre pressure control and/or inflation operations are carried out with the inflating gun
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 60/419
TYRE INFLATOR HOSE REEL60060
Inflation system with hose reelfor checking and restoring thepressure of any type of tyre by
means of the inflation gunequipped with pressure gaugeø 60 mm with scale 0 - 10 bar.Constant connection to thecompressed air system makes theinflation system always ready foruse. The hose reel is equipped witha system for quick hooking to thewall support to facilitate possiblemoving.
Art. 52010
Rewinding spring
Self-lubricating
hose guide rollers
Hose stop
Locking pawl for automatic
stopping of hose at required length
Fluid conveyor joint
Swivel bracket with bayonet joint
DETTAGLI E VANTAGGI
3
Length of hose used
Length of connection hose
Hose diameter
Inlet connection thread
Max. working pressure
Pressure gauge ø 60 mm
Operating temperature
11 m
1,5 m
ø8 x ø12 mm
M 1/4” G
10 bar
Type app. 0-10 bar
-20° +60°C
Article 52010
Pressure gauge ø 60 mm type-approved,
supplied with the inflating gun
Art. 89001
Bayonet hooking support.The placing of several supports invarious service points enables easymoving of the hose reel which isequipped with a quick-release bayonethooking system.
Art. 52010Inflation system comprising:- Art. 89010 hose reel- inflation gun with pressure gauge ø 60 mm, type-approved
- Art. 89001 bayonet hooking support
No. 1 packing m 3 0,019 kg 6,8
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 61/419
61061 EASY APPLICATION
GASOLINE
Handle for easy carrying (lightweight)
Bayonet bracket Art. 89001easy to mount on wall
Quick connectionto compressed
air system
Insertingthe hose reel
in the wall support
Quick connectionto compressed
air system
QUICK HOOKING OF HOSE REEL
QUICK RELEASE OF HOSE REEL
Step 1
Step 2
Fig. 1 Fig. 2
Unhooking hose reel fromwall support
Disconnectingfrom compressed
air system
Step 2
Step 1
Handle for easy carrying(lightweight)
Fig. 2 To prevent removal or theft of the hose reel it can be locked with a bolt or padlock.
Fig. 1 The inflation hose reel is provided with a wall bracket with automatic bayonet hooking (Art. 89001) enabling very quick and easy installation or shifting.
The ease of this operation enables - also for safety reasons - the hose reel to be put away in a closed place at the end of the workingday. Also, the application of a wall support for every service point, either inside or outside, facilitates quick shifting and application of the hose reel in the workstation required by the operator.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 62/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 63/419
GRAVITY DRAINERS
SUCTION POWER
WHEEL-MOUNTED - PORTABLE SUCTION-DRAINERS
COMBINED SUCTION-DRAINERS
SUCTION-DRAINERS
UNIVERSAL PANTOGRAPH
SUCTION DRAINER-DISPENSERS
WITH AIR-OPERATED AND DIAPHRAGM PUMP
PROBES AND ACCESSORIES
WASTE OIL SUCTION-DRAINERS 63063
page 64
110page 76
page 79
110page 84
page 96
page 100
page 90
2
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 64/419
PIT OIL DRAINERS64064
Art. 42059 ( l 65 )
Art. 42060 ( l 65 )
removablesplashguard
Pit waste oil drainers. Suitable forgravity draining of engine, gearboxand differential oil from all motor
vehicles placed on a pit.Equipped with antisplash screenwhich can be used as a supportfor draining oil filters.
OVERALL DIMENSIONS
B
E
D
F
A
C
Caution: Do not use flammable or corrosive liquids
The drainedoil can betransferredfrom the collection bowl to the storage tank by gravity or by using an emptying pumpconnected
to the fixed system(refer to page186-187) emptying
pump
Antisplash screen
A Article750
840
1200
1250
510
628
580
760
660
788
220
304
B C D E F42059 - 42060
42061 - 42062
adjustablecarriage
Art. 42061 ( l 110 )
Art. 42062 ( l 110 )
Art. 42059Pit waste oil drainer, 65-litre capacity, equipped withquick-release connector
No. 1 packing m 3 0,140 kg 27,3
Art. 42060Pit waste oil drainer, 65-litre capacity, equipped withhose-holder ø 30
Art. 42061Pit waste oil drainer, 110-litre capacity, equipped withquick-release connector
No. 1 packing m 3 0,235 kg 39
Art. 42062Pit waste oil drainer, 110-litre capacity, equipped withhose-holder ø 30
No. 1 packing m 3 0,140 kg 27,1 No. 1 packing m 3 0,235 kg 38
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 65/419
FLOOR OIL DRAINERS 65065
Art. 42072 ( l 95 )
Art. 42073 ( l 95 )
Art. 42069 ( l 50 )
Art. 42070 ( l 50 )
OVERALL DIMENSIONS
Caution: Do not use flammable or corrosive liquids
Wheel-mounted floor waste oildrainers, suitable for gravity drainingof engine, gearbox and differential oil
from all motor vehicles.Equipped with antisplash screenwhich can be used as a supportfor draining oil filters.
E
C D
B
AThe drained oilcan be transferredfrom the collection bowl to the storage tank by suctionwith the incorporated probe or by an emptying pump
connectedto thefixed system(refer to page186-187)
Antisplash screen
A Article42069 - 40270
42072 - 42073
780
1130
660
988
510
628
630
725
235
200
B C D E
emptying pump
Art. 42070Floor waste oil drainer, 50-litre capacity, equipped withsuction tube
No. 1 packing m 3 0,136 kg 18,8
Art. 42072Floor waste oil drainer, 95-litre capacity, equipped withquick-release connector
No. 1 packing m 3 0,200 kg 34
Art. 42073Floor waste oil drainer, 95-litre capacity, equipped withpump Art. 33070 (see page 163)
No. 1 packing m 3 0,200 kg 39
Art. 42069Floor waste oil drainer, 50-litre capacity, equipped withquick-release connector
No. 1 packing m 3 0,136 kg 19,0
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 66/419
DRUM OIL DRAINERS66066
Wheel-mounted waste oildrainers. Ideal for use with jerry
cans, drums and containers ofvarious sizes, up to 220 kg.Suitable for gravity draining ofengine, gearbox and differential oilfrom all motor vehicles placed onan auto lift or pit.The height-adjustable bowl(15 litres) is mounted on a swivel joint that facilitates positioning.
Art. 42050 ( Kg 20 - 60 )
Art. 42000 ( Kg 180 - 220 )
A
B
As well as serving as a filter for small residuals, bolts, etc.,the antisplash screen is also a useful support for drainingthe changed filters.
Caution: Do not use flammable or corrosive liquids
wheel-mountedfor drums 20 - 220 kg
A Article B42000
42050
1300
1200
1800
1800
OVERALL DIMENSIONS
15 litreadjustable bowl
Art. 42050Waste oil drainer for 20 - 60 kg drums, consisting of:- Art. 80050 trolley for 20 - 60 kg containers- collection bowl with oversize funnel- antisplash screen/filter
Art. 42000
Waste oil drainer for 180 - 220 kg drums, consisting of:- Art. 80200 trolley for 180 - 220 kg drums
- collection bowl with oversize funnel- antisplash screen/filter
- drum clamping ring
No. 2 packing m 3 0,120 kg 17
No. 2 packing m 3 0,150 kg 29
total operating rangeof bowl 780 mm
ø bowl 580 mm
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 67/419
67067 DETAILS AND ADVANTAGES
Bowl adjustment support
Trolley platform suitable for any type of container or drum up to 60 kg
Removable oversize funnel
Antisplash screen
Adjustable bowl to increase operating range
Bowlclosing valve
Bowl clamping ring
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 68/419
OIL DRAINERS WITH TANK 68068
Art. 42090 ( l 90 ) Art. 42065 ( l 65 )
Waste oil drainers withwheel-mounted tank.Suitable for gravity draining of
engine, gearbox and differential oilfrom all motor vehicles placed onan auto lift or pit.The bowl (15 litres) with height-adjustable central support ismounted on a swivel joint thatfacilitates positioning.
Article
Tank capacity
Max. collection capacity
Bowl capacity
Diameter oversize funnel
Length draining hose
Max. height
Min. height
Draining pressure
42065
65 l
52 l
15 l
ø 580 mm
2 m
1780 mm
1270 mm
0,5 bar
42090
90 l
75 l
15 l
ø 580 mm2 m
1900 mm
1400 mm
0,5 bar
42115
115 l
97 l
15 l
ø 580 mm
2 m
1920 mm
1420 mm
0,5 bar
with central bowl
No. 2 packing m 3 0,300 kg 34
No. 2 packing m 3 0,270 kg 33 No. 2 packing m 3 0,420 kg 42
Art. 42065Waste oil drainer with wheel-mounted 65-litre tank,equipped with:- level gauge- collection bowl with oversize funnel- antisplash screen/filter- removable tool tray
Art. 42090
Waste oil drainer with wheel-mounted 90-litre tank,equipped with:
- level gauge- collection bowl with oversize funnel- antisplash screen/filter- removable tool tray
Art. 42115Waste oil drainer with wheel-mounted 115-litre tank,equipped with:- level gauge- collection bowl with oversize funnel- antisplash screen/filter- removable tool tray
Caution: Do not use flammable or corrosive liquids
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 69/419
69069
Art. 42115 ( l 115 )
A
B
A Article
Height-adjustablecentral support
42065
4209042115
1270
14001420
DETAILS AND ADVANTAGES
OVERALL DIMENSIONS
B
1780
19001920
Note:
Kit fordraining tank with pump(refer to page 186)
total operating rangeof bowl 780 mm
ø bowl 580 mm
Removable oversize funnel
Antisplash screen
Adjustable bowl to increase operating range
Level indicator with scale in litres
and gallons
2 m hose fordraining
tank with air
Tank drainingvalve
Removabletool tray
Unit with safetyvalve 1 bar, and universal valve 1/4” G
Stable and handy wheel-mounted base
Bowl closingcock
Bowl height adjustment tube clamping ring
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 70/419
70070 OIL DRAINERS WITH TANK
Art. 42088 ( l 90 )
Art. 42089 ( l 90 )
Art. 42063 ( l 65 )
Art. 42064 ( l 65 )
Waste oil drainers, withwheel-mounted tank equippedwith air inlet pressure regulator
and quick-release connector foremptying the drained oil.Suitable for gravity draining ofengine, gearbox and differential oilfrom all motor vehicles placed onan auto lift or pit.The bowl (15litres) with height-adjustablecentral support is mountedon a swivel joint that facilitatespositioning.
with central bowl
Art. 42063Waste oil drainer with wheel-mounted 65-litre tank,equipped with:- quick-release connector for emptying the tank- level gauge- collection bowl with oversize funnel- antisplash screen/filter- removable tool tray
Art. 42089
Waste oil drainer with wheel-mounted 90-litre tank
and air inlet pressure regulator, equipped with:- quick-release connector for emptying the tank- level gauge- collection bowl with oversize funnel- antisplash screen/filter- removable tool tray
No. 2 packing m 3 0,300 kg 34
No. 2 packing m 3 0,270 kg 33
Art. 42114
Waste oil drainer with wheel-mounted 115-litre tankand air inlet pressure regulator, equipped with:- quick-release connector for emptying the tank- level gauge
- collection bowl with oversize funnel- antisplash screen/filter- removable tool tray
No. 2 packing m 3 0,420 kg 42
Caution: Do not use flammable or corrosive liquids
Art. 42088
Waste oil drainer with wheel-mounted 90-litre tank,equipped with:- quick-release connector for emptying the tank- level gauge- collection bowl with oversize funnel- antisplash screen/filter- removable tool tray
No. 2 packing m 3 0,300 kg 34
Art. 42113
Waste oil drainer with wheel-mounted 115-litre tank,equipped with:- quick-release connector for emptying the tank- level gauge
- collection bowl with oversize funnel- antisplash screen/filter- removable tool tray
No. 2 packing m 3 0,420 kg 42
Art. 42064Waste oil drainer with wheel-mounted 65-litre tankand air inlet pressure regulator, equipped with:- quick-release connector for emptying the tank- level gauge- collection bowl with oversize funnel- antisplash screen/filter- removable tool tray
No. 2 packing m 3 0,270 kg 33
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 71/419
71071
Art. 42113 ( l 115 )
Art. 42114 ( l 115 )
A
B
Article
Height-adjustablecentral support
42063 - 42064
42088 - 4208942113 - 42114
OVERALL DIMENSIONS
B
1780
19001920
Article
Tank capacity
Max. collection capacity
Bowl capacity
Diameter oversize funnel
Max. height
Min. height
Draining pressure
42063 - 42064
65 l
52 l
15 l
ø 580 mm
1780 mm
1270 mm
0,5 bar
42088 - 42089
90 l
75 l
15 l
ø 580 mm
1900 mm
1400 mm
0,5 bar
42113 - 42114
115 l
97 l
15 l
ø 580 mm
1920 mm
1420 mm
0,5 bar
Note:
Kit fordraining tank with pump(refer to page 186)
A
1270
14001420
total operating rangeof bowl 780 mm
ø bowl 580 mm
Pressure regulator with pressure gauge for
regulating the inletcompressed air pressure
Quick-release connector for emptying the
drained oil
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 72/419
OIL DRAINERS WITH TANK 72072
Art. 42066 ( l 65 ) Art. 42091 ( l 90 )
Waste oil drainers, withwheel-mounted tank.Suitable for gravity draining of
engine, gearbox and differential oilfrom all motor vehicles placed onan auto lift or pit. The bowl(15 litres) with side support offersgreater manoeuvrability of thedrainer even in difficult positions.The height-adjustable bowl ismounted on a swivel joint thatfacilitates positioning.
Article
Tank capacity
Max. collection capacity
Bowl capacity
Diameter oversize funnel
Length draining hose
Max. height
Min. height
Draining pressure
42066
65 l
52 l
15 l
ø 580 mm
2 m
1750 mm
1340 mm
0,5 bar
42091
90 l
75 l
15 l
ø 580 mm
2 m
1700 mm
1250 mm
0,5 bar
42116
115 l
97 l
15 l
ø 580 mm
2 m
1730 mm
1280 mm
0,5 bar
with side bowl
Art. 42066Waste oil drainer with wheel-mounted 65-litre tank
and side bowl, equipped with:- level gauge- collection bowl with oversize funnel- antisplash screen/filter- removable tool tray
Art. 42091
Waste oil drainer with wheel-mounted 90-litre tankand side bowl, equipped with:
- level gauge- collection bowl with oversize funnel- antisplash screen/filter- removable tool tray
No. 2 packing m 3 0,300 kg 34
No. 2 packing m 3 0,270 kg 33
Art. 42116Waste oil drainer with wheel-mounted 115-litre tankand side bowl, equipped like Art. 42091
No. 2 packing m 3 0,420 kg 42
Caution: Do not use flammable or corrosive liquids
The minimum heightof the drainer with side bowl allows the motor vehicle to be positioned at a height also enablingother maintenanceoperations.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 73/419
73073
Art. 42116 ( l 115 )
DETAILS AND ADVANTAGES
A
B
Height-adjustable side support
OVERALL DIMENSIONS
A Article
42066
4209142116
1340
12501280
B
1750
17001730
Note:
Kit fordraining tank with pump(refer to page 186)
total operating rangeof bowl 780 mm
ø bowl 580 mm
Removable oversize funnel
Antisplash screen
Adjustable bowl to increase operating range
Level indicator with scale in litres
and gallons
2 m hose fordraining tank
with air
Tank drainingvalve
Removabletool tray
Unit with safetyvalve 1 bar, and universal valve 1/4” G Keep open duringoil draining
Stable and handy wheel-mounted base
Bowl height adjustment tube clamping ring
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 74/419
OIL DRAINERS WITH TANK 74074
Art. 42101 ( l 100 )
Waste oil drainers withwheel-mounted 100-litre tank.Suitable for gravity draining of
engine, gearbox and differential oilfrom all motor vehicles placed onan auto lift or pit. The tank can beemptied by suction or by manualor air pump. The bowl (17 litres)suitable for safety draining largequantities of oil from trucks, has alarger passage with directdischarge inside the tank. It isalso height-adjustable andmounted on a swivel joint thatfacilitates positioning.
Art. 42102 ( l 100 )
for trucks
No. 2 packing m 3 0,370 kg 46
No. 2 packing m 3 0,370 kg 42
Art. 42101Waste oil drainer with wheel-mounted 100-litre tankemptying with suction, equipped with:- suction tube for tank emptying- level gauge- collection bowl- removable tool tray
No. 1 packing m 3 0,350 kg 40
Caution: Do not use flammable or corrosive liquids
Art. 42102
Waste oil drainer with wheel-mounted 100-litre tank for
emptying with manual pump, equipped with:- manual rotary pump for tank emptying- level gauge- collection bowl- removable tool tray
Art. 42103Waste oil drainer with wheel-mounted 100-litre tank foremptying with air pump, equipped with:- air pump for tank emptying- level gauge- collection bowl- removable tool tray
The minimum height and the operating range of the bowl enable oil draining even indifficult situationswith limited space.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 75/419
75075
1 0 4 0
1 6 6 0
Height-adjustable side support
OVERALL DIMENSIONS
Art. 42103 ( l 100 )
DETAILS AND ADVANTAGES
Note:
Kit fordraining tank with pump(refer to page 186)
total operating rangeof bowl 698 mm
ø bowl 456 mm
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 76/419
To understand the concept of suction power it is important to remember the
difference between pressure and depression.
In this way the characteristics and advantages offered by the oil drainer will be
clearly understood.
A T M O S P H E R E
It is important to remember that the atmospheric pressure is given by the
weight of the air above us, and this value is expressed in atmospheres.
At sea-level this weight is approx. 1 Kg per cm2, i.e. 1 atm.
On the other hand, a depression or vacuum is obtained by removing all the air
contained in a given recipient or tank, and the maximum value obtainable
(vacuum or suction power) is independent of the pumping or suction system
used. Whatever the pump used ( electric pump, air pump, Venturi principle,
etc. ) the maximum depression (or suction power) obtained is equal to the
atmospheric pressure outside the suction system.
In fact, this value cannot be exceeded because, obviously, it is not possible to
remove from a container more air than what is contains.
One kg per square metre corresponds to 10 tons per square metre of area;
almost the same as a one cubic metre block of lead.
Man, however, does not feel this enormous weight exerted on him because
the atmosphere is also present inside his organism
Therefore, however, it is necessary to refer to the structure of the atmosphere
that surrounds us and, above all, its barometric stratification and
compressibility. Its lower layers, i.e. those nearest the ground, are more densely
compressed than those higher up, precisely like what happens with a pile of
bags of compressible material. (see Fig. 1).
The atmospheric pressure decreases as the altitude increases: at sea level it is
1 atm, at 2,000 metres a.s.l. it is approx. 0.8 atm, at 10,000 metres it falls to
approx. 0.3 atm (see Fig. 2).
In general, pressure is obtained by compressing any type of fluid inside a given
container, until reaching the required values: 1 - 3 - 10 - 100 atm without limits,
apart from those of the fluid container's structure and the power of the pump
used.
SUCTION POWER76076
Fig. 1
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 77/419
The air pressure at sea-level is 1 atm, at 2000 metres a.s.l. the pressure falls to approximatively 0.8 atm (see fig. 2).
At 2,000 metres a.s.l.the atmospheric pressureis approx. 0.8 atm
At sea-levelthe atmospheric pressureis approx. 1 atm
At 10,000 metres a.s.l.the atmospheric pressureis approx. 0.3 atm
PUMP OPERATION WITH VENTURI PRINCIPLE
Therefore the suction force generated by the Venturi
principle is equal to that obtained with any other
air-operated and/or electric pump.
For correct depressurisation, the pressure
of the air passing through the Venturi
system must be between 6.5 and 7 bar.
77077
Connect a compressed air line (7 atm) to the special connection on the suction device. Obliged to pass through a special
“MULTIPLIER NOZZLE” of the Venturi unit, the air considerably increases in speed, creating “EDDIES” that can suck and
“pump” all the air contained in the suction device tank, thus creating a complete vacuum.
Fig. 2
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 78/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 79/419
OIL DRAINERS 79079
OVERALL DIMENSIONS
Art. 43016 ( l 16 )
Art. 43024 ( l 24 )
For correct depressurisation, the pressure of the air passing through
the Venturi system must be between6.5 and 7 bar
Vacuum gauge for checking suction power
Venturi inlet withcustomisable 1/4” connection
Air silencer
280
8 6 0
8 4 5
255
ArticleTank capacity
Max. draining capacity
Air pressure for depressurisation
Depressurisation time
Noise level
Suction speed(oils 70° - 80°C, probes 6 mm)
Total suction capacity
Suction hose
43016
16 l
13 l
7 bar
1 min
75 dB
1,5-2 l/min
9-10 l
2 m
43024
24 l
20 l
7 bar
1-1,5 min
75 dB
1,5-2 l/min
15-16 l
2 m
Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids
portable
Air-operated drainers.Ideal for quick engine oil changeof any motor vehicle. The old oil
is sucked from the engine bymeans of the probes supplied. After depressurisation the drainerworks independently withoutrequiring continuous connection tothe compressed air systemSuck hot oil at 70 - 80 °C.
No. 1 packing m 3 0,080 kg 10,5
No. 1 packing m 3 0,090 kg 13,7
Art. 43016 Air-operated waste oil drainer with portable 16-litre
tank, equipped with:- level gauge- Art. 45560 set of probes (refer to page 100)
Art. 43024
Air-operated waste oil drainer with wheel-mounted
24-litre tank, equipped with:- level gauge- Art. 45560 set of probes (refer to page 100)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 80/419
WASTE OIL DRAINERS80080
Art. 43060 ( l 65 ) Art. 43090 ( l 90 )
Article
Tank capacity
Max. draining capacity
Depressurisation time
Suction speed (oils 70° - 80°C, probes 6 mm)
Total suction capacity
Suction hose
Draining hose
Max. pressure for draining
43060
65 l
52 l
2 min
1,5-2 l/min
43-45 l
2 m
2 m
0,5 bar
43090
90 l
75 l
2,5-3 min
1,5-2 l/min
60-65 l
2 m
2 m
0,5 bar
43114
115 l
97 l
3-3,5 min
1,5-2 l/min
85-90 l
2 m
2 m
0,5 bar
Air-operated drainers.Ideal for quick engine oil changeof any motor vehicle. Suitable for
sucking more than 8 litres fromtrucks, tractors and heavy vehicles.The old oil is sucked from theengine by means of the probessupplied. After depressurisation thedrainer works independentlywithout requiring continuousconnection to the compressed airsystem.Suck hot oil at 70 - 80 °C.
wheel-mounted
No. 2 packing m 3 0,230 kg 26,9
No. 2 packing m 3 0,250 kg 31,4
Art. 43060 Air-operated waste oil drainer with wheel-mounted
65-litre tank, equipped with:- level gauge- removable tool tray- Art. 45560 set of probes (refer to page 100)
Art. 43090
Air-operated waste oil drainer with wheel-mounted90-litre tank, equipped with:- level gauge- removable tool tray- Art. 45560 set of probes (refer to page 100)
No. 2 packing m 3 0,420 kg 39
Art. 43114 Air-operated waste oil drainer with wheel-mounted
115-litre tank, equipped with:- level gauge- removable tool tray- Art. 45560 set of probes (refer to page 100)
Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 81/419
81081
Art. 43114 ( l 115 )
Vacuum gauge for checking suction power
Venturi inlet withcustomisable 1/4” connection
DETAILS AND ADVANTAGES
B
A
OVERALL DIMENSIONS
A
43060
4309043114
860
10001020
B
600
640
660
Article
Note:
Kit fordraining tank with pump(refer to page 186)
Air silencer
Tankdraining valve
Removable probecontainer
Removabletool tray
Unit with safety valve 1 bar, and universal valve 1/4” G
Stable and handy wheel-mounted base
2 m suction hosewith probeconnection
Level indicator with scale in litres
and gallons
2 m hosefor draining
tank with air
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 82/419
WASTE OIL DRAINERS82082
Art. 43065 ( l 65 ) Art. 43091 ( l 90 )
Air-operated drainers withtransparent prechamber.Ideal for quick engine oil change of
any motor vehicle. The 8-litreprechamber can be used for quickand independent draining. Itstransparency allows the quantityand quality of the sucked oil to bechecked immediately. Afterdepressurisation the drainer worksindependently without requiringcontinuous connection to thecompressed air system.Suck hot oil at 70 - 80 °C.
with prechamber
Article
Tank capacity
Max. draining capacity
Prechamber capacity
Depressurisation time
Suction speed (oils 70° - 80°C, probes 6 mm)
Total suction capacity
Suction hose
Draining hose
Max. pressure for draining
43065
65 l
52 l
8 l
2 min
1,5-2 l/min
43-45 l
2 m
2 m
0,5 bar
43091
90 l
75 l
8 l
2,5-3 min
1,5-2 l/min
60-65 l
2 m
2 m
0,5 bar
43115
115 l
97 l
8 l
3-3,5 min
1,5-2 l/min
85-90 l
2 m
2 m
0,5 bar
No. 2 packing m 3 0,250 kg 36
No. 2 packing m 3 0,230 kg 32,9
Art. 43065 Air-operated oil drainer with transparent prechamber
and wheel-mounted 65-litre tank, equipped with:- level gauge- removable tool tray- Art. 45560 set of probes (refer to page 100)
Art. 43091
Air-operated oil drainer with transparent prechamber
and wheel-mounted 90-litre tank, equipped with:
- level gauge- removable tool tray- Art. 45560 set of probes (refer to page 100)
Art. 43115 Air-operated oil drainer with transparent prechamber
and wheel-mounted 115-litre tank, equipped with:- level gauge- removable tool tray- Art. 45560 set of probes (refer to page 100)
No. 2 packing m 3 0,420 kg 43
Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 83/419
83083
Art. 43115 ( l 115 )
DETAILS AND ADVANTAGES
B
A
OVERALL DIMENSIONS
A Article
43065
4309143115
1280
14001420
B
600
640660
Note:
Kit fordraining tank with pump(refer to page 186)
2 m suction hosewith probeconnection
Vacuum gauge for checking suction power
Prechamber/tank connection and oil draining valve
Transparent prechamber with level indicator
Level indicator
with scale in litres and gallons
2 m hosefor draining
tank with air Tank drainingvalve
Removable probecontainer
Removabletool tray
Unit with safety valve 1 bar and universal valve 1/4” G
Stable and handy wheel-mounted base
To depressurise, introduce air at 6,5-7 bar through the Venturi unit.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 84/419
COMBINATION OIL DRAINERS84084
Article
Tank capacity
Max. draining capacity
Depressurisation time
Suction speed (oils 70° - 80°C, probes 6 mm)
Total suction capacity
Suction hose
Draining hose
Max. pressure for draining
44060
65 l
52 l
2 min
1,5-2 l/min43-45 l
2 m
2 m
0,5 bar
44090
90 l
75 l
2,5-3 min
1,5-2 l/min60-65 l
2 m
2 m
0,5 bar
44115
115 l
97 l
3-3,5 min
1,5-2 l/min85-90 l
2 m
2 m
0,5 bar
Air-operated combinationsuction-drainers.Ideal for quick engine oil change
of any motor vehicle. The old oil isdrained by gravity, through thebowl (15 litres) mounted on theside support and height adjustable,and by suction with the probessupplied. After depressurisation thedrainer works independentlywithout requiring continuousconnection to the compressed airsystem.Suck hot oil at 70 - 80 °C.
Art. 44060 ( l 65 ) Art. 44090 ( l 90 )
standard
Art. 44090
Combination air-operated oil suction-drainer withwheel-mounted 90-litre tank, equipped with:- level gauge
- side collection bowl- removable tool tray- Art. 45560 set of probes (refer to page 100)
Art. 44060Combination air-operated oil suction-drainer withwheel-mounted 65-litre tank, equipped with:- level gauge- side collection bowl- removable tool tray- Art. 45560 set of probes (refer to page 100)
No. 3 packing m 3 0,360 kg 38,2
No. 3 packing m 3 0,330 kg 34,6
Art. 44115Combination air-operated oil suction-drainer withwheel-mounted 115-litre tank, equipped with:- level gauge- side collection bowl- removable tool tray- Art. 45560 set of probes (refer to page 100)
No. 3 packing m 3 0,460 kg 46
Caution Do not suck brake fluids, fuels, flammable or corrosive liquids
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 85/419
85085
Art. 44115 ( l 115 )
DETAILS AND ADVANTAGES
Height-adjustable
side support
A
B
OVERALL DIMENSIONS
A Article
44060
4409044115
1340
13801400
B
1750
18801900
Note:
Kit fordraining tank with pump(refer to page 186)
total operating rangeof bowl 780 mm
ø bowl 580 mm
Removable probecontainer
Removabletool tray
Unit with safety valve 1 bar, and universal valve 1/4” G Keep open duringOil draining
Stable and handy wheel-mounted base
Practical for sucking more than 8 litres from trucks, tractors and heavy vehicles
Removable oversize funnel
Antisplash screen
Adjustable bowl to increase operating range
Level indicator with scale in litres
and gallons
2 m hosefor draining
tank with air
Tank drainingvalve
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 86/419
COMBINATION OIL DRAINERS86086
Air-operated combinationsuction-drainers with transparentprechamber.
Ideal for quick engine oil change of anymotor vehicle. The old oil is drained bygravity, through the bowl (15 litres), and bysuction with the probes supplied.The prechamber (8-litre capacity) can beused for rapid and independent suction. Itstransparency allows the quantity andquality of the sucked oil to be checkedimmediately . After depressurisation thedrainer works without requiring continuousconnection to the compressed air system.Suck hot oil at 70 - 80 °C
Art. 44065 ( l 65 ) Art. 44091 ( l 90 )
Article
Tank capacity
Max. draining capacity
Prechamber capacity
Depressurisation time
Suction speed (oils 70° - 80°C, probes 6 mm)
Total suction capacity
Suction hose
Draining hose
Max. pressure for draining
44065
65 l
52 l
8 l
2 min
1,5-2 l/min
43-45 l
2 m
2 m
0,5 bar
44091
90 l
75 l
8 l
2,5-3 min
1,5-2 l/min
60-65 l
2 m
2 m
0,5 bar
44116
115 l
97 l
8 l
3-3,5 min
1,5-2 l/min
85-90 l
2 m
2 m
0,5 bar
with prechamber
Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids
Art. 44091
Combination air-operated oil suction-drainer with transparentprechamber and wheel-mounted 90-litre tank, equipped with:
- level gauge- side collection bowl- removable tool tray- Art. 45560 set of probes (refer to page 100)
Art. 44065Combination air-operated oil suction-drainer with transparentprechamber and wheel-mounted 65-litre tank, equipped with:
- level gauge- side collection bowl- removable tool tray- Art. 45560 set of probes (refer to page 100)
No. 3 packing m 3 0,360 kg 42,1
No. 3 packing m 3 0,330 kg 38,2
Art. 44116Combination air-operated oil suction-drainer with transparentprechamber and wheel-mounted 115-litre tank, equipped with:- level gauge- side collection bowl- removable tool tray- Art. 45560 set of probes (refer to page 100)
No. 3 packing m 3 0,460 kg 50
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 87/419
87087
Art. 44116 ( l 115 )
OVERALL DIMENSIONS
B
A
DETAILS AND ADVANTAGES
Height-adjustable side support
A Article
44065
4409144116
1530
16601680
B
1750
18801900
Note:
Kit fordraining tank with pump(refer to page 186
total operating rangeof bowl 780 mm
ø bowl 580 mm
2 m suction hosewith probeconnection
Vacuum gauge for checking suction power
Prechamber/tank connection and oil draining cock
Transparent prechamber with level indicator
Level indicator with scale in litres
and gallons
2 m hose fordraining tank with air
Tank drainingvalve
Removable probecontainer
Removabletool tray
Unit with safetyvalve 1 bar, and universal valve 1/4” G Keep open duringOil draining
Stable and handy wheel-mounted base
Removable oversize funnel
Antisplash screen
Adjustable bowl to increase operating range
To depressurise, introduce air at 6,5-7 bar through the Venturi unit.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 88/419
COMBINATION OIL DRAINERS88088
Art. 44066 ( l 65 )
Art. 44067 ( l 65 )
with prechamber
Air-operated combination suction-drainerswith transparent prechamber andwheel-mounted tank equipped with air inlet
pressure regulator and quick-releaseconnector for draining collected oil.The old oil is drained by gravity, through thebowl (15 litres), and by suction with theprobes supplied.The prechamber (8-litre capacity) can beused for rapid and independent suction.Its transparency allows the quantity andquality of the sucked oil to be checkedimmediately. After depressurisation thedrainer works without requiring continuousconnection to the compressed air system.Suck hot oil at 70 - 80 °C.
Art. 44092 ( l 90 )
Art. 44093 ( l 90 )
No. 3 packing m 3 0,460 kg 51
Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids
Art. 44117
Combination air-operated suction-drainer with transparentprechamber and wheel-mounted 115-litre tank, equipped with:- quick-release connector for draining tank- level gauge- side collection bowl- removable tool tray- Art. 45560 set of probes (refer to page 100)
Art. 44066Combination air-operated suction-drainer with transparentprechamber and wheel-mounted 65-litre tank, equipped with:- quick-release connector for draining tank- level gauge- side collection bowl- removable tool tray- Art. 45560 set of probes (refer to page 100)
No. 3 packing m 3 0,460 kg 50
No. 3 packing m 3 0,330 kg 38,2
Art. 44118
Combination air-operated suction-drainer with transparentprechamber and wheel-mounted 115-litre tank, equipped with:
- quick-release connector for draining tank- air inlet pressure regulator
- level gauge - side collection bowl- removable tool tray- Art. 45560 set of probes (refer to page 100)
Art. 44093
Combination air-operated suction-drainer with transparentprechamber and wheel-mounted 90-litre tank, equipped with:
- quick-release connector for draining tank- air inlet pressure regulator- level gauge - side collection bowl- removable tool tray- Art. 45560 set of probes (refer to page 100)
No. 3 packing m 3 0,360 kg 43
Art. 44092
Combination air-operated suction-drainer with transparentprechamber and wheel-mounted 90-litre tank, equipped with:
- quick-release connector for draining tank- level gauge- side collection bowl- removable tool tray- Art. 45560 set of probes (refer to page 100)
No. 3 packing m 3 0,360 kg 42,1
Art. 44067Combination air-operated suction-drainer with transparentprechamber and wheel-mounted 65-litre tank, equipped with:- quick-release connector for draining tank- air inlet pressure regulator
- level gauge - side collection bowl- removable tool tray- Art. 45560 set of probes (refer to page 100)
No. 3 packing m 3 0,330 kg 39
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 89/419
89089
Article
Tank capacity
Max. draining capacity
Prechamber capacity
Prechamber capacity
Suction speed (oils 70° - 80°C, probes 6 mm)
Total suction capacity
Suction hose
Max. pressure for draining
44066 - 44067
65 l
52 l
8 l
2 min1,5-2 l/min
43-45 l
2 m
0,5 bar
44092 - 44093
90 l
75 l
8 l
2,5-3 min1,5-2 l/min
60-65 l
2 m
0,5 bar
44117 - 44118
115 l
97 l
8 l
3-3,5 min
1,5-2 l/min
85-90 l
2 m
0,5 bar
OVERALL DIMENSIONS
B
A
Article
44066 - 44067
44092 - 4409344117 - 44118
B
1750
18801900
A
1530
16601680
Note:
Kit fordraining tank with pump(refer to page 186
Art. 44117 ( l 115 )
Art. 44118 ( l 115 )
total operating rangeof bowl 780 mm
ø bowl 580 mm
Height-adjustable side support
Quick-releaseconnector for
draining collected oil
Pressure regulator with pressure gauge for adjustingcompressed air inlet pressure
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 90/419
PANTOGRAPH OIL SUCTION-DRAINERS90090
Art. 46064 ( l 65 )
Art. 46065 ( l 65 )
2007
570 480
1410
550
360
1 4 0
1 0 0 9
OVERALL DIMENSIONS
Air-operated combinationsuction-drainer with pantographcollection bowl and wheel-mounted
65-litre tank. The old oil is drainedby gravity with floor tray (14 litres) orraised for vehicles placed on anauto lift or pit.The suction-drainer also drains theold oil by suction with the probessupplied. After depressurisation thedrainer works independently withoutrequiring continuous connection tothe compressed air systemSuck hot oil at 70 - 80 °C.
for moto and auto
Art. 46064Universal waste oil drainer with 65-litre tank,
equipped with:- level gauge- 14-litre collection bowl on cantilever arms- removable tool tray- not equipped with suction unit or probes
Art. 46065
Air-operated universal oil suction-drainer with 65-litretank, equipped with:- level gauge
- 14-litre collection bowl on cantilever arms- removable tool tray- Art. 45560 set of probes (refer to page 100)
No. 3 packing m 3 0,247 kg 38,2
No. 4 packing m 3 0,310 kg 42,7
Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids
Note: refer to page 93 for technical specifications
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 91/419
PANTOGRAPH OIL SUCTION-DRAINERS 91091
Art. 46114 ( l 115 )
Art. 46115 ( l 115 )
2400
1 4 0
1 5 0 0
1770
360
590650
550
Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids
OVERALL DIMENSIONS
Air-operated combinationsuction-drainer with pantographcollection bowl and wheel-mounted
115-litre tank. The old oil is drainedby gravity with floor tray (14 litres) orraised for vehicles placed on an autolift or pit. The suction-drainer alsodrains the old oil by suction with theprobes supplied. Afterdepressurisation the drainer worksindependently without requiringcontinuous connection to thecompressed air systemSuck hot oil at 70 - 80 °C.
for motor vehicles
Tank with antisplash filter
Art. 46115
Air-operated universal oil suction-drainer with 115-litretank, equipped with:- level gauge
- 14-litre collection bowl on cantilever arms- removable tool tray- Art. 45560 set of probes (refer to page 100)
Art. 46114Universal waste oil drainer with 115-litre tank,
equipped with:- level gauge- 14-litre collection bowl on cantilever arms- removable tool tray- not equipped with suction unit or probes
No. 3 packing m 3 0,360 kg 49,5
No. 4 packing m 3 0,420 kg 50,8
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 92/419
PANTOGRAPH OIL SUCTION-DRAINERS92092
Art. 46116 ( l 115 )
2400
1 4
0
1 5 0 0
1770
360
590650
550
Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids
Air-operated combinationsuction-drainer with pantograph collectionbowl, transparent prechamber and
wheel-mounted 115-litre tank. The old oil isdrained by gravity with floor tray (14 litres)or raised for vehicles placed on an auto liftor pit, or by suction with the probessupplied. The prechamber (8-litre capacity)can be used for rapid and independentsuction. Its transparency allows thequantity and quality of the sucked oil tobe checked immediately. After depressurisation the drainer worksindependently without requiring continuousconnection to the compressed air systemSuck hot oil at 70 - 80 °C.
with prechamber
OVERALL DIMENSIONSTank with antisplash filter
Art. 46116Universal waste oil suction-drainer with transparentprechamber and wheel-mounted 115-litre tank,
equipped with:- level gauge- 14-litre collection bowl on cantilever arms- removable tool tray- Art. 45560 set of probes (refer to page 100)
No. 4 packing m 3 0,420 kg 53,2
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 93/419
93093USE
Article
Tank capacity
Max. draining capacity
Prechamber capacity
Bowl capacity
Depressurising pressure
Depressurisation time
Noise level
Suction speed
(oils 70° - 80°C, probes 6mm)Total suction capacity
Suction and draining hose
Max. pressure for draining
46116
115 l
97 l
8 l
14 l
7 bar
3-3,5 min
75 dB
1,5-2 l/min
85-90 l
2 m
0,5 bar
46215
115 l
97 l
-
50 l
7 bar
3-3,5 min
75 dB
1,5-2 l/min
85-90 l
2 m
0,5 bar
46064
65 l
52 l
-
14 l
-
-
-
-
-
2 m
0,5 bar
46065
65 l
52 l
-
14 l
7 bar
2 min
75 dB
1,5-2 l/min
43-45 l
2 m
0,5 bar
46114
115 l
97 l
-
14 l
-
-
-
-
-
2 m
0,5 bar
46115
115 l
97 l
-
14 l
7 bar
3-3,5 min
75 dB
1,5-2 l/min
85-90 l
2 m
0,5 bar
PANTOGRAPH SUCTION-DRAINERS - TECHNICAL SPECIFICATIONS
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 94/419
PANTOGRAPH OIL SUCTION-DRAINERS94094
Art. 46215 ( l 115 )
Air-operated combinationsuction-drainer with largepantograph collection bowl
(50 litres) and wheel-mounted115-litre tank. The old oil isdrained by gravity with floor trayor raised for trucks placed onauto lifts or pit, or by suction withthe probes supplied. After depressurisation the drainerworks without requiring continuousconnection to the compressed airsystem.Suck hot oil at 70 - 80 °C.
2550
600
510
1900
660
700
2 3 0
1 5 6 0
The collection tank can be placed on the floor
or raised under an auto lift by means of the
cantilever arms
for trucks
OVERALL DIMENSIONS
Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids
2 m suction hose with probe connection
Note: Refer to page 93 for technical specifications
Art. 46215Universal waste oil suction/drainer with wheel-mounted115-litre tank, equipped with:- level gauge- large 50-litre collection bowl on cantilever arms- removable tool tray- Art. 45560 set of probes (refer to page 100)
No. 4 packing m 3 0,520 kg 68,7
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 95/419
95095USE
Castorswith brake
Tank with 4 castorsfor easy positioning
Tank with antisplash
Protection screen/filter splash guard and support
base for filter
To empty the tank with device already depressurised,open the bowl/tank connection cock and in a few
seconds the oil will be sucked in the tank
The air pressure for correct depressurisation is
between 6,5 and 7 bar
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 96/419
SUCTION DRAINERS-DISPENSERS WITH PUMP96096
Art. 45180 ( Kg 180 - 220 )
Art. 45150 ( Kg 30 - 60 )
Wheeled-mounteddrainer-dispensers with pneumaticpump. They enable draining by
means of the probes supplied, anddelivery of the previously suckedliquid, for any vehicle or machine.The air pump, equipped with special VITON seals, is particularly suitablefor sucking and delivering fluids suchas: various oils, old oil, antifreezeliquid, diesel oil and allied products.
To adjust the working speed, operate the flow regulator,“metering” the inlet air feed.Make sure the vacuum gauge indicator is always in the optimum
position.flow regulator
optimum positionof vacuum gauge indicator
For correct draining, the pump must operate slowly.
Caution: Do not suck any flammable or corrosive liquids
wheel-mounted
No. 2 packing m 3 0,080 kg 19,5
Art. 45150Drainer-dispenser, with air pump and wheel-mounted for30 - 60 kg drums, equipped with:- 2 m suction/delivery hoses- pump with vacuum gauge- Art. 80050 trolley for 30 - 60 kg drums- Art. 45560 set of probes (refer to page 100)
- Art. 45540 probe ø 12 (refer to page 100)
No. 2 packing m 3 0,113 kg 32,1
Art. 45180
Drainer-dispenser, with air pump and wheel-mounted for180 - 220 kg drums,
equipped with:- 2 m suction/delivery hoses- pump with vacuum gauge- Art. 80200 trolley for 180 - 220 kg drums- Art. 45560 set of probes (refer to page 100)
- Art. 45540 probe ø 12 (refer to page 100)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 97/419
DRAINERS WITH PUMP 97097
Art. 45100 ( m 4 )
Art. 45110 ( m 10 )
Air pump operated fixed drainers.They enable draining by means ofthe probes supplied. The air pump,
equipped with special VITON seals,is particularly suitable for suckingand delivering fluids such as:various oils, old oil, antifreeze liquid,diesel oil and allied products.Wall-mounting enables connectionto a fixed system for draining thesucked liquid directly in the storagetank.
Article
Suction pump R 1:1
Max. air pressure at pump
Noise level
Suitable for drums
Length of suction hose
Length of draining hose
Suction speed(oils 70° - 80°C, probes 6 mm)
45111
33070/A
6 bar
81 dB
wall mounted
1/2” X 10 m
1/2” X 4 m
1,5 - 2 l/min
45100
33070/A
6 bar
81 dB
wall mounted
1/2” X 4 m
1/2” X 4 m
1,5 - 2 l/min
45110
33070/A
6 bar
81 dB
wall mounted
1/2” X 10 m
1/2” X 4 m
1,5 - 2 l/min
45180
33070/A
6 bar
81 dB
180-220 Kg
1/2” X 2 m
1/2” X 2 m
1,5 - 2 l/min
Best use of the article isobtained by connecting it to a fixed system fordirect discharge of the sucked liquid in the storage tank
Caution: Do not suck any flammable or corrosive liquid
wall-mounted
Art. 45111 ( m 10 )
45150
33070/A
6 bar
81 dB
30-60 Kg
1/2” X 2 m
1/2” X 2 m
1,5 - 2 l/min
No. 1 packing m 3 0,056 kg 12,2
Art. 45100Drainer with wall-mounted station, operated by pneumatic
pump, equipped with:- pump with vacuum gauge - wall bracket- 4 m suction/delivery hoses- Art. 45560 set of probes (refer to page 100)
- Art. 45540 probe ø 12 (refer to page 100)
No. 2 packing m 3 0,116 kg 29,1
Art. 45110
Drainer with wall-mounted station, operated by pneumatic
pump, equipped with:- pump with vacuum gauge - wall bracket
- hose reel for suction with 10 m 1/2” hose- 4 m draining hose- Art. 45560 set of probes refer to page 100)
- Art. 45540 probe ø 12 (refer to page 100)
Art. 45111Column drainer (Art. 39320) operated by pneumatic pump,equipped like Art. 45110
No. 3 packing m 3 0,250 kg 75
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 98/419
DRAINER98098
Art. 45300 ( m 4 )
For correct draining, the pump must operate slowly. To adjust theworking speed, operatethe flow regulator,“metering” the inlet air feed. Make surethe vacuum gauge indicator is always in the optimum position
Best use of the article isobtained by connecting it to a fixed system for direct drainingof the sucked liquid in the storage tank
16
Art. 45498
Art. 45499
Art. 45500
Art. 45501
Art. 45502 A
Mercedes incorporated
probe AUDI
enginesVolkswagen
engines
JTD -FIAT engines
CITROEN engines
BMW engines
Series 1/2” wall mounteddrainer-dispensers withdiaphragm pump.
They enable draining by meansof the probes supplied anddelivery of the waste liquid, forany vehicle or motorcycle. Thediaphragm pump, equipped withspecial NBR seals, is particularlysuitable for sucking and deliveringfluids such as: various oils, old oil,antifreeze liquid, diesel oil andallied products.
Connectors for engines with incorporated probe for faster suction of theold oil
wall-mounted
No. 2 packing m 3 0,070 kg 14
Art. 45300Drainer-dispenser with wall-mounted station, operatedby diaphragm pump Series 1/2”, equipped with:- diaphragm pump with vacuum gauge- 4 m suction/delivery hoses- Art. 33590 wall bracket- Art. 45560 set of probes (refer to page 100)
- Art. 45540 probe ø 12 (refer to page 100)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 99/419
99099WITH DIAPHRAGM PUMP
Art. 45310 ( m 10 ) Art. 45311 ( m 10 )
Art. 45570 Art. 39320
Art. 33/101260
Art. 33590
Art. 8430.401/AS
Art. 996.304
Art. 996.302
Art. 45560
Art. 39320
No. 1 packing m 3 0,114 kg 47
Art. 45310Drainer-dispenser with wall-mounted station, operatedby diaphragm pump Series 1/2”, equipped with:- diaphragm pump with vacuum gauge- hose reel for draining with 10 m 1/2” hose- 4 m draining hoses- Art. 33590 wall bracket- Art. 45560 set of probes (refer to page 100)
- Art. 45540 probe ø 12 (refer to page 100)
Art. 45311Column drainer (Art. 39320) operated by diaphragm
pump Series 1/2”, equipped like Art. 45310
No. 4 packing m 3 0,260 kg 77
Art. 39320
Frontal column for suction Kit, the holes allow applicationof one hosereel series 380-390-420-440-450 and onebracket for suction pump.
No. 3 packing m 3 0,130 kg 31
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 100/419
FLEXIBLE AND METAL PROBES100100
Art. 45560
consisting of:- Art. 45504 flexible probe ø 5 mm - length 700 mm- Art. 45505 rigid probe ø 5 mm - length 700 mm- Art. 45506 flexible probe ø 6 mm - length 700 mm- Art. 45516 rigid probe ø 6 mm - length 700 mm- Art. 45517 flexible probe ø 7 mm - length 1000 mm- Art. 45518 flexible probe ø 8 mm - length 700 mm- Art. 45500 connection for incorporated probes Volkswagen- Art. 45501 connection for incorporated probes BMW- Art. 45502 connection for incorporated probes Citroen
Note: The probes can be supplied separately
PROBES SUPPLIED BY REQUEST
Non-standard probes available by request. Specify for vehiclesrequiring a longer probe for draining the oil from the bottom of thesump.
Art. 45515 flexible probe ø 5 mm - length 1000 mm
Art. 45526 flexible probe ø 6 mm - length 1500 mm
Art. 45527 flexible probe ø 7 mm - length 1500 mm
Art. 45528 flexible probe ø 7 mm - length 2000 mm
Art. 45538 flexible probe ø 8 mm - length 1500 mmfor suction in trucks
Art. 45539 flexible probe ø 8 mm - length 2000 mm
Art. 45540 special flexible probe ø 12 mm - length 700 mm
for quick suction. Already supplied with the following articles: Art. 45100 - 45110 - 45150 - 45180 - 45250 - 45280 - 43116 43190 - 42164 - 42215
All the drainers used for changing engine oil come with a seriesof standard metal and flexible probes in addition to connectionsfor engines with incorporated probes.
Art . 45500
Art. 45501
Art. 45504
Art . 45505
Art . 45506
Art . 45516
Art . 45517
Art . 45518
Art. 45526
Art. 45527
Art. 45538
Art. 45540
Art . 45502
16
Art. 45498
Art. 45499
Art. 45500
Art. 45501
Art. 45502 A
- for Mercedes cars connect the quick-release connector A of the oildrainer directly to the probe incorporated in the engine.
- for Audi cars: Art. 45498- for JTD Fiat Group cars: Art. 45499- for Volkswagen cars: Art. 45500- for BMW cars: Art. 45501- for Citroen cars: Art. 45502
Art. 45515
Art. 45528
Art. 45539
STANDARD PROBE SERIES
CONNECTORS FOR INCORPORATED PROBES
Mercedes incorporated
probeengines AUDI
enginesVolkswagen
engines JTD -FIAT
enginesCITROEN
enginesBMW
Quick connector
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 101/419
SPECIAL CONNECTIONS 101101
Art. 45550
3/8” connection for outboard engines supplied with the drainers for boating Art. 43724 - 43760 - 43765 - 43790 (refer to page 108)
Inboard engine
draining
Outboard engine
draining
Art. 45570
Art. 45570
Wall-mounted probe kit, a handy container for the longest and less-usedprobes, useful for avoiding having to carry them with the drainer.
Art. 45550
Art. 45551
Art. 45551
3/4” connection for inboard engines supplied with the drainers for boating Art. 43724 - 43760 - 43765 - 43790 (refer to page108)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 102/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 103/419
SUCTION-DRAINERS FOR FUELS
AIR-OPERATED LIQUID DRAINERS
DRAINERS FOR BOATING
ANTIFREEZE SUCTION-DRAINERS
SPECIAL DRAINERS 103103
page 104
110page 106
page 108
110page 110
3
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 104/419
SUCTION DRAINER-DISPENSERS FOR FUELS104104
Art. 45280 ( Kg 180 - 220 )
Art. 45250 ( Kg 30 - 60 )
Wheel-mounted air-operatedsuction systems, for themanagement of fuels.
The air pump, equipped with special VITON seals, is suitable for suckingpetrol or diesel oil from any vehicleor motorcycle by means of theprobes or connections supplied.The wheel-mounted drainer withpump is easy to handle, versatileand ideal for workshops andbodyshops. The system is equippedwith an earth connection fordischarging electrostatic current.
In accordancewith directive
Atex 94/9
To adjust the working speed, operate the flow regulator,“metering” the inlet air feed. Make sure the vacuum gauge
indicator is always in the opt imum posit ion.
flow regulator
optimum positionof vacuum gauge indicator
For correct draining, the pump must operate slowly.
fuel suction
No. 1 packing m 3 0,015 kg 6,2
Art. 45280
Drainer operated by air pump, wheel mounted for drums
180 - 220 kg, equipped with:- pump with vacuum gauge- Art. 80200 trolley for drums 180 - 220 Kg- 2 m suction-delivery hoses- flexible probes ø 8 - 12- connections for tubes ø 6 - 8 - 10
No. 2 packing m 3 0,113 kg 32,1
Art. 45290Connection for tube ø 6
Art. 45292
Connection for tube ø 10
Art. 45291
Connection for tube ø 8
No. 2 packing m 3 0,080 kg 19,5
Art. 45250Drainer operated by air pump, wheel mounted for drums30 - 60 kg, equipped with:- pump with vacuum gauge- Art. 80050 trolley for drums 30 - 60 kg- 2 m suction-delivery hoses- flexible probes ø 8 - 12- connections for tubes ø 6 - 8 - 10
Art. 45200
Wall-mounted pump for sucking petrol
equipped with:- wall bracket
- flow regulator unit
- earth connection
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 105/419
105105 DUAL USE
Draining occurs by means of one of the probes supplied. For fuels use the ø 12 mm flexible probe.
Note: Connect to earth before use
Delivery of sucked liquids occurs by reversing the position of the tubes. Insert the suction tube in the containerof previously sucked liquid. Insert the draining tube in the container (or tank) just emptied.
Note: Connect to earth before use
DRAINING PHASE
DELIVERY PHASE OF PREVIOUSLY SUCKED LIQUID
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 106/419
AIR-OPERATED LIQUID DRAINER106106
Art. 43116 (l 16 )
Art. 43190 (l 90 )
The liquid drainer guaranteesquick, handy and clean draining ofliquids in general (oil, brake fluid,
machine tool oil, antifreeze, etc.).Indispensable for the maintenanceof machine tools, lathes, presses,industrial compressors, hydraulicpower packs and everything havinga liquid to be drained.
Article
Tank capacity
Max. draining capacity
Depressurising time
Depressurisation pressure
Noise levelTotal suction capacity
Suction hose
Draining hose
43116
16 l
13 l
1 min
7 bar
75 dB9-10 l
2 m
-
Caution: Do not use with flammable or corrosive liquids
43190
90 l
75 l
2,5-3 min
7 bar
75 dB60-65 l
2,5 m
2 m
liquids suction
No. 2 packing m 3 0,250 kg 32No. 1 packing m 3 0,080 kg 10,1
Art. 43116Portable air-operated liquid drainer with 16-litre tank,equipped with:- level gauge- Art. 45540 industrial probe ø 12
Art. 43190 Air-operated liquid drainer with wheel-mounted 90-litre
tank, equipped with:- level gauge- Art. 45540 - 45552 ndustrial probes ø 12 and ø 22
Art. 45540Flexible probe ø 12 mm - length 700 mm(also other probes are available by request, refer to page 100 )
Art. 45552
Metal probe ø 22 mm - length 700 mm(also other probes are available by request, refer to page 100 )
Art. 43190The grip of the quick- release connector for probes has a filter that blocks the passage of any small
solid residuals sucked with the liquid. Thefilter is easy to removefor checking and cleaning
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 107/419
107107 EXAMPLES OF USE
Draining of various oils during the repair of awater pump with internal combustion engine
Draining of old oil during servicingof a lawn mover
Draining small quantities of residual liquid during an engine overhaul
Draining for changing the oil of a smallcompressor for routine maintenance
Draining for changing the oil of acompressor for routine maintenance
Draining of liquids during the maintenanceof an industrial compressor
Draining the oil from a hydraulic pressfor change or maintenance
Draining oil in a machinetool control station
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 108/419
108108 DRAINERS FOR BOATING
Art. 43724 (l 24 ) Art. 43760 (l 65 )
Waste oil drainers ideal for changingthe engine oil in boats.Draining occurs by means of a 4-metre
suction hose and connections forinboard engines (Art. 45551) andoutboard engines (Art. 45550).
No. 1 packing m 3 0,090 kg 13,7
No. 2 packing m 3 0,230 kg 27,9
Art. 43724Waste oil drainer with wheel-mounted 24-litre tank,
equipped with:- 4 m suction hose- special connections
Art. 43760
Waste oil drainer with wheel-mounted 65-litre tank,
equipped with:- 4 m suction hose- special connections
No. 2 packing m 3 0,230 kg 33,9
Art. 43765Waste oil drainer with transparent prechamber andwheel-mounted 65-litre tank, equipped with:- 4 m suction hose- special connections
No. 2 packing m 3 0,250 kg 32,4
Art. 43790
Waste oil drainer with wheel-mounted 90-litre tank,
equipped with:- 4 m suction hose- special connections
Article
Tank capacity
Max. draining capacity
Bowl capacity
Depressurisation time
Suction speed (oils 70° - 80°C, probes 6 mm)
Total suction capacity
Suction hose
Draining hose
Max. pressure for draining
43790
90 l
75 l
-
2,5-3 min
1,5-2 l/min
60-65 l
4 m
2 m
0,5 bar
43724
24 l
20 l
-
1-1,5 min
1,5-2 l/min
15-16 l
4 m
-
manual
43760
65 l
52 l
-
2min
1,5-2 l/min
43-45 l
4 m
2 m
0,5 bar
43765
65 l
52 l
8 l
2 min
1,5-2 l/min
43-45 l
4 m
2 m
0,5 bar
Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids
waste oil drainer
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 109/419
109109
Art. 43790 (l 90 ) Art. 43765 (l 65 )
Suction phase with connection Art. 45550 on an outboard engine
Suction phase with connection Art. 45551on an inboard engine with incorporated probe
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 110/419
110110 SUCTION-DRAINERS FOR ANTIFREEZE
Art. 42170 (l 50 ) Art. 42160 (l 65 )
Gravity drainers andsuction-drainers for antifreeze.Practical, functional and extremely
easy to handle. Ideal for drainingantifreeze from all motor vehiclesplaced on an auto lift, floor or pit.The tanks and bowl are equippedwith an antisplash screen, useful asa drip tray.
Article
Tank capacity
Max. draining capacity
Bowl capacity
Depressurisation time
Suction speed (oils 70° - 80°C, probes 6 mm)
Total suction capacity
Suction hose
Draining hose
Max. pressure for draining
42215
115 l
97 l
50 l
2 min
1,5-2 l/min
88-90 l
2 m
2 m
0,5 bar
42170
-
50 l
50 l
-
-
-
-
incorporated
-
42160
65 l
52 l
15 l
-
1,5-2 l/min
43 - 45 l
-
2 m
0,5 bar
42164
65 l
52 l
14 l
2 min
1,5-2 l/min
43-45 l
2 m
2 m
0,5 bar
drainers for antifreeze
Suction: Do not suck brake fluids, fuels, flammable or corrosive liquids
by gravity
No. 4 packing m 3 0,310 kg 42,70
No. 1 packing m 3 0,136 kg 18,8
Art. 42170 Antifreeze drainer with 50-litre floor tank.
Art. 42160
Anti freeze drainer with wheel-mounted 65-litre tank,
equipped with:- level gauge- collection bowl with oversize funnel
Art. 42164 Anti freeze suction-drainer with 65-litre tank andpantograph collection tray (14 litres) for cars andmotorcycles, equipped with:- level gauge- Art. 45540 probe holder with probe ø 12
Art. 42215
Antifreeze suction-drainer with 115-litre tank and large
pantograph collection tray (50 litres), equipped with:- level gauge- Art 45540 probe holder with probe ø 12
No. 4 packing m 3 0,520 kg 68,70No. 2 packing m 3 0,270 kg 33
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 111/419
111111
Art. 42215 (l 115 ) Art. 42164 (l 65 )
gravity and
suction
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 112/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 113/419
MANUAL PUMPS FOR OIL AND GREASE 113113
MANUAL OIL PUMPS page 114
MANUAL OIL DISPENSERS page 116
page 120 AIR-OPERATED OIL DISPENSERS
page 122MANUAL GREASE PUMPS
4
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 114/419
MANUAL PUMPS FOR OIL AND SIMILAR114114
Art. 31200 (Kg 50 - 220 )
Manual pump for oil and alliedproducts.Single-acting and VITON seals.
The telescopic suction tube enablesdirect application on containers ofdifferent capacities. Suitable fordelivering low-viscosity oil.
Suitable for drums
Length delivery hose
Length suction tube
Quantity deliverable with
complete cycle of lever
Max. density oil deliverable
50-220 Kg
2 m
0,7-1,04 m
240 g
SAE 130
50-220 Kg
-
0,7-1,04 m
240 g
SAE 130
Article 3120131200
Caution: Do not use flammable or corrosive liquids
single-acting
Single-action (fig. 1) occurswhen the pumping pistondelivers the fluid only in the pumping lever downstroke
Art. 32712Digital litre-counter kit with partial and cumulative reading,complete with connectionunions.
Application between the pump and delivery hose allows the quantity of oil delivered to becontrolled
Down
Double-action (fig. 2)occurs when the pumping piston delivers the fluid in itsupstroke and downstroke.Double-action delivers the
fluid with a continuous and constant flow
Up
Down
Fig. 1
Fig. 2
Art. 31201 (Kg 50 - 220 )
No. 1 packing m 3 0,016 kg 4,0
No. 1 packing m 3 0,016 kg 4,2
Art. 31200Single-acting manual pump for drums 50 - 220 Kg with 2 mflexible delivery hose
Art. 31201
Single-acting manual pump for drums 50 - 220 kg with rigidcurved terminal
VITON Seals
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 115/419
115115MANUAL PUMPS FOR OIL AND SIMILAR
Manual pump for oil and alliedproducts.Double-acting and NBR seals.
The telescopic suction tube enablesdirect application on containers ofdifferent capacities. Suitable fordelivering low/high-viscosity oil.
Art. 30050 (Kg 30 - 60 )
Art. 30200 (Kg 50 - 220 )
Suitable for drums
Length delivery hose
Length suction tube
Quantity deliverable with
complete cycle of lever
Max. density oil deliverable
30-60 Kg
2 m
0,7-1,04 m
220 g
SAE 240
50-220 Kg
2 m
0,7-1,04 m
220 g
SAE 240
Article 3020030050
Caution: Do not use flammable or corrosive liquids
double-acting
Note: The position of lever pivot can be varied (3 hookings) to adapt the pumping
force to the viscosity of the oil used.
No. 3
No. 2
No. 1
127 mm
100 mm
60 mm
1 : 2,2
1 : 3,6
1 : 6,9
220 g
170 g
100 g
SAE W 80/90
SAE W 85/140
SAE 240
LEVER HOOKING VARIATION TABLE
Hooking Pumping
shaft strokeCompression
ratio Delivery capacity with
complete cycleOil viscosity
Art. 30050
Double-acting manual pump for drums 30 - 60 Kgequipped with:- Art. 80050 trolley
No. 1 packing m 3 0,016 kg 4,4
No. 2 packing m 3 0,040 kg 13,6
Art. 30200Double-acting manual pump for drums 50 - 220 Kgcomplete with fixing ring for drum application.
VITON Seals
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 116/419
MANUAL OIL DISPENSERS116116
Art. 32016 ( l 16 ) Art. 32024 ( l 24 )
Manual oil dispensers withdouble-acting pumpsuitable for high-viscosity oil.
The manual oil dispensers areideal for filling or topping-upengine, gearbox, differential,hydraulic power pack, reductionunit oil, etc.
double-acting pump
No. 1 packing m 3 0,090 kg 13,7
No. 1 packing m 3 0,080 kg 10,6
Art. 32016Portable manual oil dispenser with 16-litre tank,equipped with:- level gauge- Art. 24891 antisplash funnel
Art. 32024
Manual oil dispenser with wheel-mounted 24-litre tank,
equipped with:- level gauge- Art. 24891 antisplash funnel
No. 2 packing m 3 0,185 kg 24
Art. 32065
Manual oil dispenser with wheel-mounted 65-litre tank,equipped with:- level gauge- Art. 24891 antisplash funnel
Art. 24891
Antisplash funnel. With antisplash rim to prevent the liquid
from spilling out when filling the tank.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 117/419
117117
Art. 32065 ( l 65 ) Art. 24891
The manual double-acting pumps
are equipped with a lever withvariable pivot according to theviscosity of the oil to be delivered.
Art. 32712
Possibility of applyingthe digital litre-counter Kit
Tank capacity
Structure
Length delivery tube
Quantity deliverable with complete cycle of lever
Max. density oil deliverable
16 l
portable
2 m
220 g
SAE 240
Article 32016
24 l
wheel mounted
2 m
220 g
SAE 240
32024
65 l
wheel mounted
2 m
220 g
SAE 240
32065
OVERALL DIMENSIONS
A B
845
880
880
255
280
600
B
A
Article
32016
32024
32065
Up
DownNote: double-action occurswhen the pumping piston deliversfluid during the upstroke and downstroke
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 118/419
MANUAL OIL DISPENSERS118118
Wheel-mounted oil dispenserswith double-acting pump suitable
for high-viscosity oil andremovable drip bowl. Ideal forfilling or topping-up tanks forengine, gearbox, differential,hydraulic power pack, reductionunit oil, etc. The removable dripbowl, on height-adjustable sidesupport, enables the recovery ofany oil spillage during the fillingphases in particular in gearboxesand differentials.
Art. 30051 ( Kg 30 - 60 ) Art. 32067 ( l 65 )
Removal dripbowl
Tank capacity
Structure
Length delivery tube
Quantity deliverable with complete cycle of lever
Max. density oil deliverable
30-60 Kg drums
wheel-mounted
2 m
220 g
SAE 240
Article 30051
65 l
wheel-mounted
2 m
220 g
SAE 240
32067
65 l
wheel-mounted
2 m
220 g
SAE 240
32068
No. 2 packing m 3 0,108 kg 20,6
Art. 30051Manual double-acting pump, for 30 - 60 Kg containers,equipped with:- Art. 80050 trolley- removal drip bowl
No. 2 packing m 3 0,232 kg 31
Art. 32067Manual oil dispenser with wheel-mounted 65-litre tank,equipped with:- level gauge- tool tray- removal drip bowl- Art. 24891 antisplash funnel
No. 2 packing m 3 0,232 kg 32
Art. 32068Manual oil dispenser with wheel-mounted 65-litre tank,
equipped with:- level gauge- Art. 32712 digital litre-counter (refer to page. 117)
- tool tray- removal drip bowl- Art. 24891 antisplash funnel
Caution: Do not use flammable or corrosive liquids
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 119/419
119119
Art. 32068 ( l 65 )
Removable drip bowl for easy emptying and cleaning.Height-adjustable, it turns on support unit for easy positioning.
OVERALL DIMENSIONS
A Article B
30051
32067
32068
1010
1160
1160
1700
1620
1620
A
B
A
B
USE
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 120/419
AIR-OPERATED OIL DISPENSERS120120
EXAMPLES OF USE
Art. 32712
Art. 33016 ( l 16 )
Art. 33024 ( l 24 )
Air-operated oil dispenserssuitable for high-viscosity oil.Filled with oil to 4/5 their capacity
and pressurised to 6 - 8 bar,they work independently withoutrequiring connection to thecompressed air system.The air-operated oil dispensers areideal for filling or topping-up engine,gearbox, differential, hydraulic powerpack, reduction unit oil, etc.
Caution: Do not use flammable or corrosive liquids
Art. 24891
air operated
No. 1 packing m 3 0,080 kg 9,9
Art. 33016Portable air-operated oil dispenser with 16-litre tank,equipped with:- level gauge- delivery gun with flexible terminal- Art. 24891 antisplash funnel
No. 1 packing m 3 0,090 kg 13,1
Art. 33024
Air-operated oil dispenser with wheel-mounted 24-litre
tank equipped with:- level gauge- delivery gun with flexible terminal- Art. 24891 antisplash funnel
Art. 32712
Digital litre-counter kit with partial and cumulative reading,complete with connection unions. Application between thepump unit and delivery hose allows the quantity of oildelivered to be controlled.
Art. 24891
Antisplash funnel. With special rim to prevent the liquidfrom spilling out when filling the tank.
Topping-upor fillingengine oil
Topping-upor filling lubrication oil
Topping-upor filling lubrication oil in gearcases
Topping-up
or filling lubrication oil in gearcases
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 121/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 122/419
13 Kg MANUAL GREASE PUMPS122122
Art. 68012
Art. 68113
Portable and wheel-mountedlever or pedal-operated manualgrease pumps.
Practical and functional, they canbe used in all workplaces andenable quick, high-pressuregreasing on any motor vehicle ormechanism.They are equipped with a greasefollower plate that protects thelubricant and ensures positivepriming.
Grease pedal
Grease pump
Delivery hose
Grease
Ball
Vacuumcreated by the pump
sucking grease
The follower plate, indispensablewhen using particularly hard greases, is drawn towardsthe bottom of thedrum by thevacuum created by the pump inthe grease suction stage.
8
4 0
520340
350
7 1
0
Pump
Cover
Follower plate
OVERALL DIMENSIONS
manual
No. 1 packing m 3 0,070 kg 14
No. 1 packing m 3 0,070 kg 10,4
Art. 68012Portable high-pressure 350 - 400 bar hand-operated greasepump, equipped with:- tank 13 Kg- grease follower plate- 1/4” - 2,5 m hose- rigid terminal with 4-jaw grease head (Art. 66739)
Art. 68113
Wheel-mounted high-pressure 300 - 350 bar pedal-operated
grease pump, equipped with:
- tank 13 Kg- grease follower plate- 1/4” - 2,5 m hose- rigid terminal with 4-jaw grease head (Art. 66739)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 123/419
13 Kg AIR-OPERATED GREASE PUMPS 123123
Art. 68213
Wheel-mounted grease pumpwith air pump.Practical, functional and compact,
they can be used in all workplacesand enable quick, high-pressuregreasing on any motor vehicle ormechanism.Equipped with a grease followerplate that protects the lubricantand ensures positive priming.
13 kg tank
Follower plate
Carrying handlewith hose hook Art. 62041
Art. 66892
Art. 66888
Art. 993.504
300
8
4 0
OVERALL DIMENSIONS
air operated
No. 1 packing m 3 0,100 kg 16,7
Art. 68213 Air-operated grease pump R 50:1, wheel-mounted,equipped with:- 13 kg tank- grease follower plate- Art. 993.504 1/4” - 4 m hose- Art. 62041 air pump R 50:1- Art. 66892 nipple 1/4” x 3/8” - M/M- Art. 66888 grease gun with flexible terminal
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 124/419
MANUAL GREASE PUMPS124124
Portable lever-operated manualgrease pumps. Practical and
functional, they can be used in allworkplaces, and in particular onrough ground such as in farming orbuilding sites.They enable easy change of thegrease container (drum or bucket)and quick greasing on any motorvehicle or mechanism. They areequipped with a grease followerplate that protects the lubricantand ensures positive priming.
OVERALL DIMENSIONS
Art. 60311
Art. 60280 Art. 60310
6 3 0
280
350
310 - 337
Pump
Drum cover
Follower plate
1/4” hose
Art. 66739
portablefor drums 12 - 30 kg
Art. 60280Portable high-pressure 350 - 400 bar, hand-operated
grease pump for drums of 12 - 20 kg with external ø from240 mm to 260 mm, equipped with:- manual pump- drum cover ø 280 mm- grease follower plate ø 265 mm- 1/4” - 2,5 m hose- rigid terminal with 4-jaw grease head (Art. 66739)
No. 1 packing m 3 0,022 kg 6,5
No. 1 packing m 3 0,022 kg 5,4
Art. 60310
Portable high-pressure 350 - 400 bar, hand-operated
grease pump for drums of 16 - 30 kg with external ø from255 mm to 300 mm, equipped with:- manual pump- drum cover ø 310 mm- grease follower plate ø 310 mm- 1/4” - 2,5 m hose- rigid terminal with 4-jaw grease head (Art. 66739)
Art. 60311
Portable high-pressure 350 - 400 bar, hand-operatedgrease pump for drums of 16 - 30 kg with external ø from270 mm to 330 mm, equipped with:
- manual pump- drum cover ø 337 mm- grease follower plate ø 310 mm- 1/4” - 2,5 m hose- rigid terminal with 4-jaw grease head (Art. 66739)
No. 1 packing m 3 0,036 kg 7,2
ø from 270 to 330 mm
ø from 255 to 300 mm
ø from 240 to 260 mm
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 125/419
MANUAL GREASE PUMPS 125125
OVERALL DIMENSIONS
6 3 0
280
350
310 - 337460
1 0 0 0
680
500
Portable trolley-mountedlever-operated manual grease
pumps. Practical and functional,they can be used in all workplaces,and in particular on rough groundsuch as in farming or building sites.They enable easy change of thegrease container (drum or bucket)and quick greasing on any motorvehicle or mechanism. They areequipped with a grease followerplate that protects the lubricantand ensures positive priming.
Art. 61311
Art. 61280 Art. 61310
Pump
Drum cover
Follower plate
1/4” hose
Art. 66739
Art. 80035
trolley-mountedfor drums 12 - 30 kg
Art. 61280Portable wheel-mounted high-pressure 350 - 400 bar,hand-operated grease pump for drums of 12 - 20 Kg withexternal ø from 240 mm to 260 mm, equipped with:- Art. 80035 trolley- manual pump - drum cover ø 280 mm- grease follower plate ø 265 mm- 1/4” - 2,5 m hose- rigid terminal with 4-jaw grease head (Art. 66739)
No. 2 packing m 3 0,032 kg 11,5
No. 2 packing m 3 0,032 kg 10,4
Art. 61310
Portable wheel-mounted high-pressure 350 - 400 bar,
hand-operated grease pump for drums of 16 - 30 Kg withexternal ø from 255 mm to 300 mm, equipped with:- Art. 80035 trolley- manual pump - drum cover ø 310 mm- grease follower plate ø 310 mm- 1/4” - 2,5 m hose- rigid terminal with 4-jaw grease head (Art. 66739)
Art. 61311
Portable wheel-mounted high-pressure 350 - 400 bar,hand-operated grease pump for drums of 16 - 30 Kg withexternal ø from 270 mm to 330 mm, equipped with:
- Art. 80035 trolley- manual pump - drum cover ø 337 mm- grease follower plate ø 310 mm- 1/4” - 2,5 m hose- Art. 66739 rigid terminal with 4-jaw grease head
No. 2 packing m 3 0,046 kg 12,2
ø from 270 to 330 mm
ø from 255 to 300 mm
ø from 240 to 260 mm
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 126/419
HAND-OPERATED GREASE TRANSFER PUMPS126126
Portable manual lever-operatedgrease transfer pumps.
Each cycle of the lever delivers 50 gof grease. Practical and handy,they are used for filling gearcases,casings, hand-operated greaseguns. They enable easy changing ofthe grease container (drums orbucket) and are equipped with agrease follower plate that protectsthe lubricant and ensures positivepriming.
Transfer indrums
Filling central greasing system
portablefor drums 16 - 30 kg
Pump
Drum cover
Follower plate
1/2” hose
Dispenser
Quick connect coupling
Art. 60410
Art. 60411
Art. 60410Portable hand-operated grease transfer pump for drums
of 16 - 30 kg, with external ø from 255 mm to 300 mm,equipped with:- hand-operated transfer pump- drum cover ø 310 mm- grease follower plate ø 310 mm- 1/2” - 2 m hose- dispenser with rigid terminal
Art. 60450
Female quick connector complete with check valve- 1/4” F thread for filling central greasing system
Art. 60451
Male quick connector complete with check valve- 1/4” F thread for filling central greasing system
No. 1 packing m 3 0,040 kg 6,7
Art. 60411
Portable hand-operated grease transfer pump for drumsof 16 - 30 kg, with external ø from 270 mm to 330 mm,equipped with:- hand-operated transfer pump- drum cover ø 337 mm- grease follower plate ø 310 mm- 1/2” - 2 m hose- dispenser with rigid terminal
ø from 270 to 330 mm
ø from 255 to 300 mm
No. 1 packing m 3 0,030 kg 6
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 127/419
HAND-OPERATED GREASE TRANSFER PUMPS 127127
Trolley-mounted manuallever-operated grease transfer
pumps. Each cycle of the leverdelivers 50 g of grease. Practicaland handy, they are used for fillinggearcases, casings, manual greaseguns. They enable easy changingof the grease container (drums orbucket) and are equipped with agrease follower plate that protectsthe lubricant and preserves itscharacteristics.
Transfer in small drums
Filling central greasing system
OVERALL DIMENSIONS
7 8 0
310
337
350
460
1 0 0 0
680
500
trolley-mountedfor drums 16 - 30 kg
Pump
Drum cover
Follower plate
1/2” hose
Art. 80035
Dispenser
Art. 61410
Art. 61411
Art. 61410Portable trolley-mounted hand-operated grease transfer
pump for drums of 16 - 30 kg, with external ø from 255 mmto 300 mm, equipped with:- Art. 80035 trolley- hand-operated transfer pump - drum cover ø 310 mm- grease follower plate ø 310 mm- 1/2” - 2 m hose- dispenser with rigid terminal
Art. 60450
Female quick connector complete with check valve- 1/4” F thread for filling central greasing system
Art. 60451
Male quick connector complete with check valve– 1/4” F thread for filling central greasing system
Art. 61411
Portable trolley-mounted hand-operated grease transferpump for drums of 16 - 30 kg, with external ø from 270 mmto 330 mm, equipped with:- Art. 80035 trolley- hand-operated transfer pump - drum cover ø 337 mm- grease follower plate ø 310 mm- 1/2” - 2 m hose- dispenser with rigid terminal
ø from 270 to 330 mm
ø from 255 to 300 mm
No. 2 packing m 3 0,040 kg 11
No. 2 packing m 3 0,050 kg 11,7
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 128/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 129/419
SINGLE AND DOUBLE-ACTING page 132
page 136
page 138
DELIVERY - COMPRESSION RATIO page 134
page 143FLUID STORAGE ROOM MANAGEMENT
page 144MONITORING
INFORMATION ON PUMPS-SYSTEMS 129129
APPROX. DELIVERY - SUCTION DISTANCE
DISTRIBUTION SYSTEM
5
5
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 130/419
EXAMPLE OF SYSTEM
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 131/419
All rights reserved
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 132/419
Suction
Delivery
Suction
Delivery
SINGLE AND DOUBLE-ACTING PUMP132132
PUMPING PISTON UPSTROKE PUMPING PISTON DOWNSTROKE
In a single-acting pump,the pumped product comes out during one of the two piston strokes making up a pumpingcycle
In a double-acting pump,the pumping pistondelivers the fluid in both alternating movements(upstroke and downstroke)
A double-acting pumpdelivers the fluid in an
even and constant way.
Suction
Delivery
PRINCIPLE OF SINGLE-ACTING PUMP
PRINCIPLE OF DOUBLE-ACTING PUMP
The mechanisms for obtaining a double-acting pump are numerous.
PUMPING PISTON UPSTROKE PUMPING PISTON DOWNSTROKE
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 133/419
Pumping piston - (A)
Upper chamber
Lower chamber
ADVANTAGES OF DOUBLE-ACTION 133133
There are many technical solutions for obtaining a reciprocating double-acting pump.
The double-action of RAASM pumps is obtained with solutions that have simplified the pump mechanism itself,ensuring that delivery of the fluid in both alternating movements (upstroke and downstroke) of the pump occursonly through the difference in volume between the diameters of the pumping piston (A) and the pump shaft (B).
On the upstroke, delivery is caused by the pumping piston (A).
On the downstroke it is caused by the difference in volume between the diameter of the motor shaft (B) andthe diameter of the pumping piston (A).
In addition to guaranteeing regular delivery of the fluid, this solution offers the further advantage of havingfewer parts inside the pump. This means less wear plus greater and longer reliability.
Air distributor Silencer
UPSTROKE DOWNSTROKE
Air distributor Silencer
Pumping piston valve
Motor shaft - (B)
Liquid outlet Liquid outlet
Recycletube
Motor piston
Compressed air
Pumping piston - (A)
Upper chamber
Lower chamber
Compressed air
Foot valve
Motor piston
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 134/419
Compression ratio (R), is understood as the direct ratio existing between the pressure of compressed air feedingthe pump and the pressure at which the fluid comes out.
Inside the pump this compression ratio is obtained by the difference in diameter between the a ir motor piston A and the liquid pumping piston B.
It can be noted that the greater the difference between the pumping piston and the air motor piston, the greaterthe pressure of liquid delivered, but the lower the quantity (capacity). For example, in the grease pump with ratio50:1, the diameter of the motor piston is 60 mm and the diameter of the pumping piston is 8.5 mm, the pressure ofthe grease coming out is 50 times higher than the pressure of the air feeding it.
COMPRESSION RATIO134134
Air inlet 1 bar
Liquid outlet 1 bar
motor piston (A)
pumping piston (B)
Air inlet
1 bar
Liquid outlet
3 bar
motor piston (A)
pumping piston (B)
Air inlet 1 bar
Liquid outlet 5 bar
motor piston (A)
pumping piston (B)
R 5:1 Delivery of high viscosity
liquids at long distances(oil pump Art. 36094)
R 1:1 Transfer (oil pump Art. 33094)
air piston ø 60 feed at 1 bar
pumping piston ø 60 oil outlet pressure 1 bar
air piston ø 60 feed at 1 bar
pumping piston ø 38 oil outlet pressure 3 bar
R 3:1 Dispensing at short distances(oil pump Art. 35194)
air piston ø 60 feed at 1 bar
pumping piston ø 28,5 oil outlet pressure 5 bar
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 135/419
CAPACITY 135135
PUMPS WITH RATIO 1:1 have low head (power) but high capacity (air piston diameter equal to suction piston diameter), and are excellent for transferring low/medium-viscosityfluids and for short distances.
PUMPS WITH RATIO 3:1 have medium head (power) and medium capacity , and are excellent for delivering medium/high-viscosity fluids and for short distances (wheel-mounted kit).
PUMPS WITH RATIO 5:1 have high head (power) and medium capacity , and are excellent for delivering and dispensing medium/high-viscosity fluids and for short distances (wheel- mounted kit with or without hose reel) and with fixed systems for centralised dispensing
1 bar
3 bar
1 bar
5 bar
1 bar
1 bar
When choosing a pump, however, the relative capacity (approximate capacity) is taken into consideration, asindicated on page 137.
The capacity of a reciprocating pump indicates the quantity of fluid it delivers.
The capacity of a pump is read in two ways:- relative capacity - real capacity
The “relative” capacity or “approximate” capacity was obtained by laboratory testing under the following conditions:- pump operated at 6 bar- using SAE 30 motor oil- at room temperature (16-18°C)- with free outlet, i.e. without any connection, delivery hose or gun connected to the pump.
The ”real” capacity, i.e. the “real delivery quantity” in certain applications and combinations, varies accordingto:- type of compression ratio (refer to page 134)
- single or double-acting pump (refer to page 132)
- viscosity and temperature of the fluid;- pressure of air feeding the pump;- transfer with one delivery hose only;- delivery hose and gun for dispensing near the drum;
- centralised systems with one or more delivery points;- size of dispensing tube;- height and length of system in suction and delivery;- type of connections and accessories for completing the
system.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 136/419
The suction capacity of a pump is a technical concept that must take into account various parameters,including:- atmospheric pressure- specific weight of the liquid- viscosity of the liquid
- evaporation of the liquid- size of suction tube, etc All these factors affect the suction capacity of a pump, because they all depend on precise physical lawswhich cannot be avoided.
Therefore a pump must be installed as close as possible to the suction point; in fact, if a certain distance isexceeded, the efficiency and functionality of the pump are seriously affected.
For the correct installation of apump that ensures “RELAXED”and lasting operation, just followthe simple indications givenbelow:
SUCTION DISTANCE136136
In order to render this concept clearer, image how hard it would be to drink yourcool drink, just served, with the glass on the floor and you on the table.
vertical suctiondistance max. 6
metres
pump position
foot valve at suction point
Approximate suction distances when installing a pump
Firstly, when installing a pump, it is essential to apply a foot valve at the point of suction.
The vertical distance between the pump and the foot valve must not be more than 6 metres.The horizontal distance between the pump and the foot valve must not be more than 20 metres.
The vertical and horizontal distances must be taken into consideration when installing a pump, these mustalso be proportionally reduced.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 137/419
The “relative” or “approximate” capacity was obtained by means of laboratory testing under the followingconditions:
- for pumps ratio 5:1 and 3:1 =pump with air feed at 6 bar; temperature 15° C with SAE 30 oil
- for pumps ratio 50:1 and 65:1 =pump with air feed at 6 bar; temperature 15° C with NLGl - 1 grease
APPROXIMATE CAPACITIES ON SYSTEM 137137
PUMP RATIO 5:1
PUMP RATIO 3:1
GREASE PUMP
length in metres
length in metres
length in metres
r e l a t i v e
c a p a c i t y l / m i n
r e l a t i v e c a p a c i t y l / m i n
ratio
50:1
ratio
65:1
hose 1/2”
hose 3/4”
hose 1”
hose 1/2”
hose 3/4”
hose 1”
r e l a t i v e c a p a c i t y g / m i n
20
18
16
14
12
10
8
6
4
2
0
0 5 10 15 25 50 100
0 5 10 15 25 50 100
18
16
14
12
10
8
6
4
2
0
0 5 10 15 25
1600
1400
1200
1000
800
600
400200
0
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 138/419
INDICATIONS FOR SYSTEM138138
Medium and large-size system for dispensing oils and allied products.
This system includes storage and dispensing systems for several fluids such as various types of oil, grease,
antifreeze and old oil. Each fluid has one or more delivery points located at different distances from the storagepoint.
For the purpose of correct and effective planning it is essential to consider each distribution line as aseparate system.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 139/419
DISTRIBUTION SYSTEMS 139139
To correctly design a distribution line or system, and for efficient operation, it is essential to know the following data:
- type of fluid to be delivered, its density and temperature(a temperature decrease determines an increase in density)
- distance between the pump and delivery point
- the number of delivery points and quantity/minute of fluid to be delivered for each pump- horizontal distance between the pump and the delivery points connected to it- vertical distance between the pump and the delivery points connected to it- vertical and horizontal distance of the pump from the fluid suction point (a precise physical law applies)
With this fundamental data it is possible to correctly determine the most suitable RAASM articles and accessoriesfor the type of application required.
Example:- type of pump (with tank, drum or wall-mounted)- delivery system (from hose reel, oil bar, etc.)
- type of delivery guns (with or without litre-counters)- accessories and unions for completing the system
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 140/419
DISTRIBUTION SYSTEMS140140
According to European Standards, high-pressure fluid distribution systems must not exceed 400 bar.
The tubes, in steel or rubber, used for preparing the grease distribution lines must be specific for high pressures(600 bar), and must be smooth and seamless, with connections having an inside diameter greater than theinside diameter of the tube to be connected. No constrictions must be created.
Characteristics of tubes for system lines
Tube for main grease line- distance 0 - 200 metres: 1/2” (Ø 15 mm)Grease pendant tube: 3/8” (Ø 10 mm)
The tubes, in steel or rubber, used for preparing the oil, antifreeze, etc., distribution lines must be specific forhigh pressures (60 bar), and must be smooth and seamless, with connections having an inside diameter greaterthan the inside diameter of the tube to be connected. No constrictions must be created.
Characteristics of tubes for system lines
Tubes for main motor oil line- distance 0 - 15 metres: 3/4” (Ø 19 mm)
- distance 16 - 50 metres: 1” (Ø 25 mm)- distance 51 - 100 metres: 1.1/4” (Ø 30 mm)- distance 101 - 200 metres: 1”.1/2 (Ø 38 mm)
Oil pendant tube: 3/4” (Ø 19 mm)
Tubes for main gear oil line- distance 0/15 metres: 1” (Ø 25 mm)
- distance 16/50 metres: 1.1/2” (Ø 38 mm)- distance 51/250 metres: 2” (Ø 50 mm)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 141/419
DISTRIBUTION SYSTEMS 141141
Constrictions
Constrictions
Systemtube
System
tube
When preparing a system , in addition to the correct choice of tubing, it is also important to install functionalsubsidiary elements to ensure better efficiency of the system:- cocks (ball valves) at the start of each line, at every branch and delivery point (e.g. before the connection to
the hose reel)- bleeding system to be applied at the highest part of the line- condensate discharge or filter at the start of the compressed air feeding the pump
The unions, branches, bends and anything that can create constrictions must be chosen carefully so as not tocompromise the efficiency of the system.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 142/419
EXAMPLES OF DISTRIBUTION SYSTEMS142142
System with wall-mounted pump and flexible suction tube connected directly to the tank discharge cock.In this case it is advisable to apply a foot valve to the tank cock.
System with wall-mounted pump and movable suction tube. This system facilitates changing the empty tankand enables the distance between the pump and the liquid to be delivered as required.
System with pump inserted inside the tank.
A modular extension has been applied to the pump in order to adapt the suction tube to the height of the tank.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 143/419
EXAMPLE OF STORAGE ROOM MANAGEMENT 143143
1
2
3
4
5
6
7
8
220/24V power supply
Solenoid valve with air discharge
Flashing light
Timer
Main stop pushbutton
Levels and alarms control
Automatic-manual selector
Solenoid valve
1
2
3
4
5
6
7
8
Fluid storage can be managed in an effective and safe way by means of specific electropneumatic accessories that signalthe level of tanks and stop the pumps when the fluid is finished.The operator can have a general view of the levels of all the tanks in the storage room at any time and can stop the pumpswith a single operation (for more details refer to page 230).
Note: pipe bleeding must be done before start using the distribution system to clean pipe inner surface from dirtyor solid remnants, in order to prevent malfunction ofmeter oil pistols and accessories. For pneumatic pump first use,to allow a fast priming of the pump and to fill the pipe of the distribution system, we suggest:- gradually open compressed air feeding- let air go out from pump outlet to help oil suction from barrel or tank.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 144/419
MONITORING144144
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 145/419
MONITORING 145145
The computerized management system can be used by small garages and large service centres, as well asin industry in general, when different types of oil and antifreeze, stored in centralised tanks in a single place,must be delivered by several dispensers located in various places in the workshop.
5
5
1 Management of up to 4 delivery points.2 Delivery only by authorised personnel (up to 99 user codes).3 Deliveries with preselection of up to 99.9 litres (memory capacity up to 2000 deliveries).4 Loading and unloading of tanks, with capacity to manage up to 4 tanks.5 Management and detailed printout of deliveries, loading/unloading movements and levels of tanks
THE JMCO MODULE MANAGES FROM 1 TO 4 DELIVERY POINTS:
1 Management of up to 12 Delivery points for each MCO module.2 Up to 32 modules can be connected in network and connected to a PC for controlling up to 384
dispensers.3 Delivery only by authorised personnel (up to 900 user codes).
4 Deliveries with preselection of up to 99.9 litres.5 Management and control of loading/unloading of an unlimited number of types of fluid tanks.6 Security in the management and printing of, referring to loading/unloading movements, tank levels
and details of deliveries, with possibility of filtering the data by period, operator or product.
THE MCO MODULE MANAGES FROM 1 TO 384 DELIVERY POINTS:
COMPUTERIZED FLUID MANAGEMENT SYSTEM
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 146/419
Art. 39220 GPVS = PULSER/MONOVALVE UNIT
The GPVS in single valve version is available as an alternative to the GPV in double valve version.
JMCO MANAGES UP TO 4 DELIVERY POINTS146146
1
4
5
1
4 4 4 4
5
( * )
( * )
( * )
( * )
1
4 4
5
4 4
JMCO wiring diagram
Art. 39100 JMCO MODULE
JMCO is a system for managing the delivery of oil and other fluids from one or more centralised tanks.It uses a Control Unit through which it is possible to manage up to 4 delivery points with 4 different
products. Equipped with LCD (display) and membrane keyboard, it guides the operator in the datainput phases and displays the quantities delivered. It enables delivery in preselection and manages thequantities in the tanks. The unit is equipped with a printer for issuing tickets at the end of delivery andfor detailed and summary printouts for management of deliveries.
Art. 39221 GPV = PULSER/BIVALVE UNIT
The GPV in double valve (high precision) version is installed along the feed lines from the pumps thatsupply oil to the individual distribution centres. It combines the functions of a shut-off valve withthose of a litre-counter.
Art. 39230 LD = REMOTE DISPLAY (Optional)
The remote display is used to display the quantities delivered, even at considerable distances.
Articles not produced by Raasm
HOSE REEL HOSE REEL
OIL OIL
PRINTER PRINTER
HOSE REEL HOSE REEL
OIL OIL
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 147/419
MCO MANAGES UP TO 384 DELIVERY POINTS 147147
2
3
6
2
3
6
5
4 4 4 4 4 4 4 4
2
4
5
Articles not produced by Raasm( * )
( * )
( * )
( * )
( * )
( * )
Art. 39202 MCO MODULE WITH PU AND TICKET ISSUERThe MCO module is installed near the delivery point. It allows operators to carry out dispensing and
dialogue with the system via a special keyboard. The ticket issuer is housed in the lower part.
PU = POWER UNITThe power unit serves to guarantee low voltage power to all components of the system. All electricalconnections of the system depend on it. The PU directly controls up to 4 dispensers.
Art. 39200 MCO MODULE WITH PU WITHOUT TICKET ISSUER
Art. 39210 EPU - EXPANSION UNIT
The expansion unit is the component which, integrated with the module, enables the control of 4supplementary dispensers (Max. 2 EPU's per MCO module).
Art. 39221 GPV = PULSER/BIVALVE UNIT
The GPV in double valve (high precision) version is installed along the feed lines from the pumps thatsupply oil to the individual distribution centres. It combines the functions of a shut-off valve with thoseof a litre-counter.
Art. 39220 GPVS = PULSER/MONOVALVE UNIT
The GPVS in single valve version is available as an alternative to the GPV in double valve version.
Art. 39230 LD = REMOTE DISPLAY (Optional)
The remote display is used to display the quantities delivered, even at considerable distances.
Art. 39240 PC KIT = PERSONAL COMPUTER KIT
The PC Kit enables management of the system to be centralised on the PC. It consists of aconverter RSC 232/485 (art. 39120) for connecting the MCO Module to the PC and a CD-ROMcontaining the software to be installed. The software is designed to manage all the operationsnecessary for controlling delivery, such as system configuration and enabling operators.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 148/419
LEVEL INDICATOR148148
OCIO is an innovative and reliable system for remote monitoring of the liquid level in the tanks (up to 12), displayingthe data on the screen of your PC.The system consists of a tube with terminal for measuring the static pressure inside each tank and a control unit fordisplaying the liquid level and managing the equipment by means of software with which it is possible to:- configure the type and dimensions of the tank- define the level alarms- define the level indication- calibrate the instrument According to the settings made, the control unit activates or deactivates the alarm devices or the feed of theequipment connected.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 149/419
LEVEL INDICATOR 149149
Art. 39260
Art. 39261
Art. 39264
Art. 39265
Art. 39266 Art. 39267
Art. 39268
Articles not produced by Raasm( * )
( * )
( * )
( * )
( * )
Art. 39260
Control unit for managing the system with display of liquid level in
the tank. According to the alarm levels set, the OCIO control unit acts as aswitch for activating alarm devices or shutting off the feed to theequipment connected.
Art. 39261
Control unit with direct connection to PC for remote management
of liquid in the tank.
According to the alarm levels set on the computer, the OCIO controlunit acts as a switch for activating alarm devices or shutting off thefeed to the equipment connected.
Art. 39264
Tube with terminal, accessory for Art. 39260 or Art. 39261 , formeasuring the quantity of liquid (viscosity > 30 cst). The tubemust be immersed in the liquid and touch the bottom of thetank.
Art. 39265
Interface and softwarefor connection to 1 “OCIO” level indicator Art. 39261
Art. 39266
Interface and softwarefor connection to 4 “OCIO” level indicators Art. 39261
Art. 39267
Interface and software
for connection to 8 “OCIO” level indicators Art. 39261
Art. 39268
Interface and software
for connection to 12 “OCIO” level indicators Art. 39261
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 150/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 151/419
PUMPS FOR TRANSFER AND DISTRIBUTION 151151
page 154PUMPS FOR DISTRIBUTIONOILS AND ALLIED PRODUCTS
page 172
page 198
page 204
TROLLEY-MOUNTED - FIXED - MODULAR KITS
WALL-MOUNTED OIL BAR AND WITH DRUM
GUNS AND ACCESSORIES
CHOOSING A PUMP 110page 152
6
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 152/419
CHOOSING THE RIGHT PUMP152152
page 162 page 164 page 158
600
1:1
23 l/min
Series
Compression ratio
Capacity
Low viscosity fluids:various low viscosity oils (SAE 15/20),hydraulic fluid, gas oil and allied products, etc.
Medium viscosity fluids:motor oil, gearbox oil (SAE 15/140), etc.
High viscosity fluids:
motor oil, gearbox oil (SAE 240), etc.
Medium and high viscosity greases
Antifreeze
Windshield fluid
For other technical data see the pages indicated
650
1:1
40 l/min
600
1:1
30 l/min
page 160
500
1:1
35 l/min
- - - -
-
-
- - - -
-
--
Note: The measurements in the table are approximate
page 156
1/2” - 1”
1:1
60-160 l/min
When choosing a pump, it is important to takeinto consideration the following basic elements:
- type of fluid and its viscosity,- relative capacity to be delivered- distance between pump and point of use
- pressure of fluid for type of use.
The following table will help you choose theright pump for your needs.For other needs refer to page 290
RAASM offers a
very wide
range of
air-operated
pumps suitable
for many needs.
--
-
-
for distances< 15 m
for distances< 15 m
for distances< 50 m
for distances50 - 100 m
for distances< 15 m
for distances< 15 m
for distances< 15 m
for distances< 15 m
for distances< 15 m
for distances< 15 m
for distances< 15 m
for distances< 15 m
for distances< 15 m
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 153/419
FOR YOUR NEEDS 153153
page 314 page 166 page 168 page 170 page 171 page 238 page 239 page 312
900
2:1
95 l/min
600
3:1
14 l/min
650
5:1
18 l/min
900
5:1
45 l/min
900
7:1
30 l/min
600
50:1
1500 g/min
700
65:1
1900 g/min
1200
40:1
10000 g/min
page 161
500
3:1
20 l/min
- - - - - -
- - - - -
- - -
- - -
- - - - - -
- - - - - - - - -
or distances50 - 100 m
for distances50 - 100 m
for distances< 15 m
for distances
50 - 100 m
for distances100 - 200 m
for distances100 - 200 m
for distances100 - 200 m
for distances> 200 m
for distances50 - 100 m
for distances50 - 100 m
for distances100 - 200 m
for distances> 200 m
or distances15 - 50 m
or distances50 - 100 m
for distances50 - 100 m
for distances> 100 m
for distances
50 - 100 m
for distances
100 - 200 m
for distances> 100 m
for distances50 - 100 m
for distances50 - 100 m
for distances50 - 100 m
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 154/419
154154 DIAPHRAGM PUMPS IN ALUMINIUM
FLEXIBILITY AND MODULARITY
FLUIDS
RAASM air-operated diaphragm pumps are ideal for a wide range of uses and are arranged for
numerous applications.
RAASM diaphragm pumps are compatible with a wide variety of fluids:
- water,
- muds;
- mineral and vegetable oils,- abrasive fluids or fluids with suspended solids, etc,.
RAASM diaphragm pumps are designed according to a modular concept in order to reduce the number of
components.
This means:
- different combinations for adapting the pump to specific applications
- fast and economical scheduled maintenance operations
- easy management of spare parts
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 155/419
155155OPERATION
Liquid in suction
Liquid in delivery
Air feed
1
2
3
4
1
2
3
4
COMPLETE CYCLE SEQUENCE
Suction - vertically, not more than 6 metres- horizontally, not more than 20 metres
Delivery (depends on the following variables): - viscosity and temperature of fluid- suspended solids- length/diameter of delivery hose and its constrictions- vertically, not more than 70 metres- horizontally, not more than 200 metres
APPROXIMATE DISTANCES FOR CORRECT INSTALLATION OF A MEMBRANE PUMP
The air-operated diaphragm pumps are oscillating transfer pumps with 2 opposed pumping chambers.
Each chamber is divided into 2 hermetic parts, one for the air and one for the fluid. The 2 membranes are unitedby a metal shaft that makes them carry out an alternating motion. The introduction of air into one part of thechamber creates suction of the fluid in the opposed part of the other chamber and vice versa.
The slide valve of the air distribution system sends air (blue) to the left chamber which, pushingthe membrane outwards, compresses the previously sucked liquid (green). Through the effect of the pressure created, the valve 1 closes and the valve 2 opens, allowing the liquid to come out (green).The right membrane, obliged to carry out the same movement by the shaft joining it to the left membrane, creates a vacuum. Through the effect of the vacuum, the valve 3 opens and the valve 4 closes, enabling suction of the liquid (red).
The slide valve of the air distribution system sends air (blue) to the right chamber which, pushingthe membrane outwards, compresses the previously sucked liquid (green). Through the effect of the pressure created, the valve 3 closes and the valve 4 opens, allowing the liquid to come out (green).The left membrane, obliged to carry out the same movement by the shaft joining it to the right membrane, creates a vacuum. Through the effect of the vacuum, the valve 1 opens and the valve 2 closes, enabling suction of the liquid (red).
PHASE 1
PHASE 2
PUMP FOR DRUMS
SELF-PRIMING PUMP
The diaphragm pumps are self-priming. Depending on the model, it is possible to obtain self-priming up to 6 metres vertically and 20 metres horizontally.
The diaphragm pumps can be fitted directly on a drum, tank or other container. For easy use of the pump, equipped with suction tube, it is fixed to the container by means of its adapter.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 156/419
156156 DIAPHRAGM PUMPS Series 1/2”
for drum
The transfer diaphragm pumps indie-cast aluminium, with high-qualitycomponents, ensure lasting and
reliable operation even in extremeconditions.
33/101260
Pump material
Membrane material
Ball valve material
Compatible fluids
Compression ratio
Air inlet connection
Fluid inlet-outlet connection
Air working pressure
Air max. pressure
Average air consumption
Relative flowrate (free outlet at 8 bar)
Noise level
Deliverable oil temperature
Max. solids diameter
Suitable for drums or tanks with drum
Aluminium
NBR High Nitrile
Hytrel
Water, mineral-vegetable oils, diesel oil
1:1
F1/4” G
F3/4” x F3/4” G
2-6 bar
8 bar
400 l/min
60 l/min
75 dB
-10+50°C
ø 1,5 mm
-
Article
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
Aluminium
NBR High Nitrile
Hytrel
Water, mineral-vegetable oils, diesel oil
1:1
F1/4” G
suction tube ø 34 mm - F3/4” G
2-6 bar
8 bar
400 l/min
60 l/min
75 dB
-10+50°C
ø 1,5 mm
for drums (180-220 Kg)
33500
Ratio 1:1 Capacity 60 l/min Membrane NBR
0
4(58)
6(87)
bar (psi)
0
(m3/min)
15(3,96)
30(7,93)
45(11,89)
60(15,85)
l/min(gpm)
0,38
0,50
0,27
8(116)
95 190 285 380
A
B
C
A
B
C
F L U I D
O U T L E T P R E S S U R
E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: Cold water - 15 °CSAE30 oil (ISO VG 100) - 20 °C
No. 1 packing m 3 0,020
kg 7,0
No. 2 packing m 3 0,040
kg 10
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 157/419
157157DIAPHRAGM PUMPS Series 1”
33/101160
Pump material
Membrane material
Ball valve material
Compatible fluids
Compression ratio
Air inlet connection
Fluid inlet-outlet connection
Air working pressure
Air max. pressure
Average air consumption
Relative flowrate (free outlet at 8 bar)
Noise level
Deliverable oil temperature
Max. solids diameter
Aluminium
NBR High Nitrile
Hytrel
Water, mineral-vegetable oils, diesel oil
1:1
F1/2” G
F1.1/4” x F1.1/4” G
2-6 bar
8 bar
1200 l/min
160 l/min
75 dB
-10+50°C
ø 2 mm
Article
The transfer diaphragm pumpsin die-cast aluminium, withhigh-quality components, ensure
lasting and reliable operation evenin extreme conditions. Ideal fortransferring fluids even in thepresence of suspended solids.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
0
4(58)
6(87)
bar (psi)
0
(m3/min)
42(11,10)
83(21,91)
124(32,74)
165(43,56)
l/min(gpm)
1,04
1,38
0,69
8(116)
75 150 225 300
B
A
B
C
A
B
C
F L U I D
O U T L E T P R E S S U R
E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: Cold water - 15 °CSAE30 oil (ISO VG 100) - 20 °C
Ratio 1:1 Capacity 160 l/min Membrane NBR
No. 1 packing m 3 0,032
kg 16
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 158/419
158158 WINDSHIELD FLUIDS PUMP Series 600 S/Steel
33360 33396
Compatible fluids
Compression ratio
Air inlet connection
Oil outlet connection
Air working pressure
Air max. pressure
Average air consumption
Relative flowrate (free outlet at 8 bar)
Noise level
Deliverable oil temperature
Max. deliverable oil viscosity
Bung adaptor Art. 33434
Suction tube length
Suction tube diameter
Suitable for drums or tanks
1:1
F1/4” G
F1/2” G
6-8 bar
8 bar
370 l/min
30 l/min
81 dB
-10+50°C
50 SAE
-
-
-
modular
1:1
F1/4” G
F1/2” G
6-8 bar
8 bar
370 l/min
30 l/min
81 dB
-10+50°C
50 SAE
standard
940 mm
34 mm
for drums (180-220 Kg)
Article
Suitable for antifreeze and windshield liquids
VITON Seals
Stainless steel AISI 304air-operated pumps forshort/medium distance transfer.
Ideal for transferring low/medium-viscosity fluids such as: antifreezeliquid, windshield washing liquidand chemical products.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
modular with drum
Ratio 1:1 Capacity 30 l/min
0
4(58)
6(87)
bar(psi)
100 200 300 400
0,51
0,65
0
(m3 /min)
7,5(2,1)
15(4,1)
22,5(6,2)
30(8,3)
l/min(gpm)
0,36
8(116)
A
B
C
A
B
C
F L U I D
O U T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: windshield fluid with water
No. 1 packing
m 3 0,020
kg 7,4
No. 1 packing
m 3 0,010
kg 5,3
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 159/419
159159MODULAR KIT FOR S/STEEL PUMPS
Modular wall-mounted kit fortransfer with stainless steelpump.
Ideal for transferring low/medium-viscosity fluids such as:antifreeze liquid, window washingliquid and chemical products.Wall-mounting, with connection toa fixed system, enables liquids tobe transferred from the place ofstorage to the service station.
Art. 33300 ( R 1:1 - 30 l/min)
Art. 33115
Art. 33434
Art. 33427
Art. 33360
Art. 33426
Art. 33440
Art. 33300
Modular kit with stainless-steel pump, comprising:- Art. 33360 pump 30 l/min.- Art. 33115 wall bracket- Art. 33426 flexible suction tube- Art. 33427 rigid suction tube- Art. 33434 bung adaptor
No. 1 packing m 3 0,029 kg 11,4
Art. 33440
Gun for antifreeze and windshield liquid applicable to
Kit (Art. 33300) equipped with:- inlet joint 1/2”F
- rigid terminal with free outlet (refer to page 223)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 160/419
160160 PUMPS FOR OIL AND SIMILAR Series 500
customisable 1”modular with drum
VITON Seals
Air-operated pumps for short andmedium-distance transfer.Ideal for transferring low/medium-
viscosity fluids such as: oils, lubricantsand allied products.The wall-mounted version of thesepumps, mounted on wall or in a fixedposition by means of the specialaccessories (refer to page 204), enablesnumerous uses through the applicationof modular extensions (refer to page 232).
26090 26094
Compatible fluids
Type of seals
Suction tube upper body
Suction tube
Compression ratio
Air inlet connection
Fluid outlet connection
Air working pressure
Air max. pressure
Relative flowrate (free outlet at 8 bar)
Noise level
Deliverable oil temperature
Max. deliverable oil viscosity
Suction tube length
Suction tube diameter
Suitable for drums or tanks
VITON
aluminium
carbon steel
1:1
F1/4” G
F3/4” G
6-8 bar
8 bar
35 l/min
81 dB
-10+50°C
130 SAE
-
50 mm
modular
Article
No. 1 packing m 3 0,010
kg 5,5
No. 1 packing m 3 0,020
kg 7,2
Oils, lubricants and similar
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
VITON
aluminium
carbon steel
1:1
F1/4” G
F3/4” G
6-8 bar
8 bar
35 l/min
81 dB
-10+50°C
130 SAE
940 mm
50 mm
with drum (180-220Kg)
VITON
aluminium
carbon steel
1:1
F1/4” G
F3/4” G
6-8 bar
8 bar
35 l/min
81 dB
-10+50°C
130 SAE
-
50 mm
customisable 1”
No. 1 packing m 3 0,010
kg 6
26091
Ratio 1:1 Capacity 35 l/min
0
4(58)
6(87)
bar(psi)
60 120 180 240
0,34
0,44
0
(m3 /min)
9,0(2,4)
18(4,8)
27(7,2)
36(9,5)
l/min(gpm)
0,25
8(116) A
B
C
A
B
C
F L U I D
O U T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: SAE15 oil (ISO VG 100) - 20 °C
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 161/419
161161PUMPS FOR OIL AND SIMILAR Series 500
customisable 1”modular with drum
VITON Seals
Air-operated pumps forshort/medium distance distribution.Ideal for transferring low/medium-
viscosity fluids such as: oils, lubricantsand allied products. The wall-mountedversion of these pumps, mounted onwall or in a fixed position by means ofthe special accessories (refer to page
204), enables numerous uses throughthe application of modular extensions(refer to page 232).
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
35060 35094
Compatible fluids
Type of seals
Suction tube upper body
Suction tube
Compression ratio
Air inlet connection
Fluid outlet connection
Air working pressure
Air max. pressure
Relative flowrate (free outlet at 8 bar)
Noise level
Deliverable oil temperature
Max. deliverable oil viscosity
Suction tube length
Suction tube diameter
Suitable for drums or tanks
VITON
aluminium
carbon steel
3:1
F1/4” G
F1/2” G
6-8 bar
8 bar
20 l/min
81 dB
-10+50°C
130 SAE
-
32 mm
modular
Article
Oils, lubricants and similar
VITON
aluminium
carbon steel
3:1
F1/4” G
F1/2” G
6-8 bar
8 bar
20 l/min
81 dB
-10+50°C
130 SAE
940 mm
32 mm
with drum (180-220Kg)
35061
VITON
aluminium
carbon steel
3:1
F1/4” G
F1/2” G
6-8 bar
8 bar
20 l/min
81 dB
-10+50°C
130 SAE
-
32 mm
customisable 1”
KIND OF FLUID: SAE15 oil (ISO VG 100) - 20 °C
Ratio 3:1 Capacity 20 l/min
No. 1 packing m 3 0,010
kg 5,3
No. 1 packing m 3 0,020
kg 6,5
No. 1 packing m 3 0,010
kg 5,8
0
12(174)
18(261)
bar(psi)
80 160 240 320
0,51
0,65
0
(m3 /min)
5,0(1,3)
10(2,7)
15(4,0)
20(5,3)
l/min(gpm)
0,36
24(348) A
B
C
A
B
C
F L U I D
O U T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 162/419
162162 PUMPS FOR OIL AND SIMILAR
modular with drumcustomisable 1”
Series 600 air-operated pumps forshort/medium distance transfer.Ideal for transferring low-viscosity fluids
such as: oil, old oil, antifreeze and alliedproducts.The wall-mounted version of thesepumps, mounted on wall or in a fixedposition by means of the specialaccessories (refer to page 204), enablesnumerous uses through the applicationof modular extensions (refer to page 232).
33080 330813308233083
Compatible fluids
Compression ratio
Air inlet connection
Oil outlet connection
Air working pressure
Air max. pressure
Average air consumption
Relative flowrate (free outlet at 8 bar)
Noise level
Deliverable oil temperature
Max. deliverable oil viscosity
Bung adaptor Art. 38042
Suction tube length
Suction tube diameter
Suitable for drums or tanks
Article
Suitable for oil and similar
NBR seals
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
Ratio 1:1 Capacity 23 l/min
0
4(58)
6(87)
bar(psi)
62 125 187 250
0,32
0,41
0
(m3 /min)
6(1,6)
12(3,2)
18(4,8)
24(6,4)
l/min(gpm)
0,23
8(116) A
B
C
A
B
C
F L U I D
O U T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
1:1
F1/4”G
F1/2”G
6-8 bar
8 bar
230 l/min
23 l/min
81 dB
-10+50°C
80 SAE
-
-
-
modular
1:1
F1/4”G
F1/2”G
6-8 bar
8 bar
230 l/min
23 l/min
81 dB
-10+50°C
80 SAE
standard
-
42 mm
customisable 1”
1:1
F1/4”G
F1/2”G
6-8 bar
8 bar
230 l/min
23 l/min
81 dB
-10+50°C
80 SAE
standard on 33083
940 mm
42 mm
with drum (180-200 Kg)
No. 1 packing m 3 0,006
kg 4,3
No. 1 packing m 3 0,006
kg 5
No. 1 packing m 3 0,020
kg 6,3 kg 6,4
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 163/419
163163Series 600
33070 330713307233073
33060 330613309433096
Suitable for waste oil Suitable for industrial use (refer to page 301)
VITON seals TEFLON seals
1:1
F1/4”G
F1/2”G
6-8 bar
8 bar
230 l/min
23 l/min
81 dB
-10+50°C
80 SAE
-
-
-
modular
1:1
F1/4”G
F1/2”G
6-8 bar
8 bar
230 l/min
23 l/min
81 dB
-10+50°C
80 SAE
standard
-
42 mm
customisable 1”
1:1
F1/4”G
F1/2”G
6-8 bar
8 bar
230 l/min
23 l/min
81 dB
-10+50°C
80 SAE
standard on 33073
940 mm
42 mm
with drum (180-220 Kg)
1:1
F1/4”G
F1/2”G
6-8 bar
8 bar
230 l/min
23 l/min
81 dB
-10+50°C
80 SAE
-
-
-
modular
1:1
F1/4”G
F1/2”G
6-8 bar
8 bar
230 l/min
23 l/min
81 dB
-10+50°C
80 SAE
standard
-
42 mm
customisable 1”
1:1
F1/4”G
F1/2”G
6-8 bar
8 bar
230 l/min
23 l/min
81 dB
-10+50°C
80 SAE
standard on 33096
940 mm
42 mm
with drum (180-220 Kg)
No. 1 packing m 3 0,006
kg 4,3
No. 1 packing m 3 0,006
kg 5
No. 1 packing m 3 0,020
kg 6,3 kg 6,4
No. 1 packing m 3 0,006
kg 4,3
No. 1 packing m 3 0,006
kg 5
No. 1 packing m 3 0,020
kg 6,3 kg 6,4
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 164/419
164164 PUMPS FOR OIL AND SIMILAR
modular with drumcustomisable 1”
VITON seals
Series 650 air-operated pumps forshort/medium distance transfer.Ideal for transferring low/medium-
viscosity fluids such as: oil, old oil,antifreeze and allied products.The wall-mounted version of thesepumps, mounted on wall or in a fixedposition by means of the specialaccessories (refer to page 204),enablesnumerous uses through the application ofmodular extensions (refer to page 232).
33170 331713317233173
Compatible fluids
Compression ratio
Air inlet connection
Oil outlet connection
Air working pressure
Air max. pressure
Average air consumption
Relative flowrate (free outlet at 8 bar)
Noise level
Deliverable oil temperature
Max. deliverable oil viscosity
Bung adaptor Art. 38042
Suction tube length
Suction tube diameter
Suitable for drums or tanks
Article
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
Ratio 1:1 Capacity 40 l/min
0
4(58)
6(87)
bar(psi)
38 75 112 150
0,53
0,68
0
(m3 /min)
10,5(2,8)
21(5,5)
31,5(8,3)
42(11)
l/min(gpm)
0,38
8(116) A
B
C
A
B
C
F L U I D
O U T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
1:1
F1/4” G
F3/4” G
6-8 bar
8 bar
370 l/min
40 l/min
81 dB
-10+50°C
130 SAE
-
-
-
modular
1:1
F1/4” G
F3/4” G
6-8 bar
8 bar
370 l/min
40 l/min
81 dB
-10+50°C
130 SAE
standard
-
42 mm
customisable 1”
1:1
F1/4”G
F3/4” G
6-8 bar
8 bar
370 l/min
40 l/min
81 dB
-10+50°C
130 SAE
standard on 33173
940 mm
42 mm
with drum (180-200Kg)
Suitable for waste oil
No. 1 packing m 3 0,010
kg 5,3
No. 1 packing m 3 0,010
kg 6
No. 1 packing m 3 0,020
kg 7,3 kg 7,4
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 165/419
165165Series 650
TEFLON Seals
33160 331613319433196
According to needs, 1” suction tubes of different lengthscan be applied to the pumps defined as customisable,to enable use with any type of container.
To obtain a pump with customised suction tube:- thread 1” GAS the ends of a water pipe normally
available on the market, of length suitable for the depthof the container
- apply the threaded pipe between the pump and the footvalve (Art. 10/20)
Scelta della
Preparingcustomised
suction tube
Choosing suction tube
length
Pump application withcustomised suction tube
customized suction tube
pumps Art. 33061-33071-3308133161-33171
foot valve Art. 10/20
1:1
F1/4”G
F3/4” G
6-8 bar
8 bar
370 l/min
40 l/min
81 dB
-10+50°C
130 SAE
-
-
-
modular
1:1
F1/4”G
F3/4” G
6-8 bar
8 bar
370 l/min
40 l/min
81 dB
-10+50°C
130 SAE
standard
-
42 mm
customisable 1”
1:1
F1/4”G
F3/4” G
6-8 bar
8 bar
370 l/min
40 l/min
81 dB
-10+50°C
130 SAE
standard on 33196
940 mm
42 mm
with drum (180-200Kg)
Suitable for industrial use (refer to page 301)
No. 1 packing m 3 0,010
kg 5,3
No. 1 packing m 3 0,010
kg 6
No. 1 packing m 3 0,020
kg 7,3 kg 7,4
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 166/419
166166 PUMPS FOR OIL AND SIMILAR
modular with drumcustomisable 1”
Series 600 air-operated pumps for medium-distance oil distribution.Ideal for distributing medium/high-viscosity oil
and antifreeze liquid. Suitable for movableinstallations and fixed systems.The wall-mounted version of these pumps,mounted on wall or in a fixed position bymeans of the special accessories (refer to page
204), enables numerous uses through theapplication of modular extensions(refer to page 232).
35161 Articolo 35160
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
NBR SealsRatio 3:1 Capacity 14 l/min
Compatible fluids
Compression ratio
Air inlet connection
Fluid outlet connection
Air working pressure
Air max. pressure
Average air consumption
Relative flowrate (free outlet at 8 bar)
Noise level
Deliverable oil temperature
Max. deliverable oil viscosity
Bung adaptor Art. 38042
Suction tube length
Suction tube diameter
Suitable for drums or tanks
3:1
F1/4” G
F1/2” G
6-8 bar
8 bar
330 l/min
14 l/min
81 dB
-10+50°C
130 SAE
standard
-
42 mm
customisable 1”
Suitable for medium/high-viscosity oil
3:1
F1/4” G
F1/2” G
6-8 bar
8 bar
330 l/min
14 l/min
81 dB
-10+50°C
130 SAE
-
-
-
modular
No. 1 packing m 3 0,010
kg 5,0
No. 1 packing m 3 0,010
kg 4,4
0
10(145)
15(217)
bar(psi)
95 190 285 380
0,48
0,62
0
(m3 /min)
3,5(0,9)
7(1,8)
10,5(2,7)
14(3,7)
l/min(gpm)
0,35
20(290) A
B
C
A
B
C
F L U I D
O U T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 167/419
167167Series 600
35173
35176
3519435196
35163
3:1
F1/4” G
F1/2” G
6-8 bar
8 bar
330 l/min
14 l/min
81 dB
-10+50°C
130 SAE
standard on 35176
740 mm
42 mm
with drum (50-60 Kg)
3:1
F1/4”G
F1/2” G
6-8 bar
8 bar
330 l/min
14 l/min
81 dB
-10+50°C
130 SAE
standard on 35196
940 mm
42 mm
with drum (180-220 Kg)
3:1
F1/4” G
F1/2” G
6-8 bar
8 bar
330 l/min
14 l/min
81 dB
-10+50°C
130 SAE
standard
1250 mm
42 mm
customisable 1”
Suitable for medium/high-viscosity oil
No. 1 packing m 3 0,020
kg 5,8
No. 1 packing m 3 0,020
kg 6,5
No. 1 packing m 3 0,020
kg 6,8
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 168/419
168168 PUMPS FOR OIL AND SIMILAR
36061 Articolo
modular customisable 1” with drum
36060
Series 650 air-operated double-acting pumps formedium-distance oil distribution. Ideal for alsodistributing high-viscosity oil. The double action
guarantees the delivery of a continuous andconstant flow, ideal for all installations, excellent forcentralised distribution systems.The wall-mounted version of these pumps,mountedon wall or in a fixed position by means of thespecial accessories (refer to page 204), enablesnumerous uses through the application of modularextensions (refer to page 232).
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
NBR SealsRatio 5:1 Capacity 18 l/min
0
17(246)
26(377)
bar(psi)
40 80 120 160
0,56
0,72
0
(m3 /min)
4,5(1,2)
9(2,4)
13,5(3,6)
18(4,8)
l/min(gpm)
0,40
35(507) A
B
C
A
B
C
F L U I D
O U T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
No. 1 packing m 3 0,010
kg 5,2
Suitable for medium/high-viscosity oil
5:1
F1/4” G
F1/2” G
6-8 bar
8 bar
350 l/min
18 l/min
81 dB
-10+50°C
240 SAE
-
-
-
modular
No. 1 packing m 3 0,010
kg 4,7
5:1
F1/4” G
F1/2” G
6-8 bar
8 bar
350 l/min
18 l/min
81 dB
-10+50°C
240 SAE
standard
-
42 mm
customisable 1”
Compatible fluids
Compression ratio
Air inlet connection
Fluid outlet connection
Air working pressure
Air max. pressure
Average air consumption
Relative flowrate (free outlet at 8 bar)
Noise level
Deliverable oil temperature
Max. deliverable oil viscosity
Bung adaptor Art. 38042
Suction tube length
Suction tube diameter
Suitable for drums or tanks
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 169/419
169169Series 650
3607336076
3609436096
36063
5:1
F1/4” G
F1/2” G
6-8 bar
8 bar
350 l/min
18 l/min
81 dB
-10+50°C
240 SAE
standard
1250 mm
42 mm
customisable 1”
5:1
F1/4” G
F1/2” G
6-8 bar
8 bar
350 l/min
18 l/min
81 dB
-10+50°C
240 SAE
standard on 36076
740 mm
42 mm
with drum (50-60 Kg)
5:1
F1/4”G
F1/2” G
6-8 bar
8 bar
350 l/min
18 l/min
81 dB
-10+50°C
240 SAE
standard on 36096
940 mm
42 mm
with drum (180-220 Kg)
No. 1 packing m 3 0,020
kg 6,2
No. 1 packing m 3 0,020
kg 6,8
Suitable for medium/high-viscosity oil
No. 1 packing m 3 0,020
kg 7,2
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 170/419
170170 PUMPS FOR OIL AND SIMILAR Series 900
Compatible fluids
Type of seals
Suction tube upper body
Suction tube Air inlet connection
Fluid outlet connection
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. pressure
Suitable for drums or tanks
90F/5190C/51 Article
Series 900 industrialair-operated double-actingpumps for distribution.
Suitable for transferring oils,lubricants and allied productsalso with very high viscosity.The double action guaranteesthe delivery of a continuous andconstant flow, ideal for all needs.Particularly effective in systemsequipped with several distributionpoints.
modular
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
Polyurethane sealsRatio 5:1 Capacity 45 l/min
0
16(232)
24(348)
bar(psi)
50 100 150 200
1,3
1,8
0
(m3 /min)
11,25(3,0)
22,50(5,9)
33,75(9,0)
45,00(11,9)
l/min(gpm)
1,0
36(522) A
B
C
A
B
C
F L
U I D
O U T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
oils, lubricants
and allied products
polyurethane/PU
aluminium
carbon steel
F 1/2”
F 3/4”G
ø 62
1,6 m3 /min
80 dB
8 bar
modular
oils, lubricants
and allied products
polyurethane/PU
carbon steel
carbon steel
F 1/2”
F 3/4”G
ø 62
1,6 m3 /min
80 dB
8 bar
modular
No. 1 packing m 3 0,040
kg 12
No. 1 packing m 3 0,040
kg 13
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 171/419
171171PUMPS FOR OIL AND SIMILAR Series 900
91C/7190C/71 Article
modular drum
Series 900 industrialair-operated double-actingpumps for distribution.
Suitable for transferring oils,lubricants and allied productsalso with very high viscosity.The double action guaranteesthe delivery of a continuous andconstant flow, ideal for all needs.Particularly effective in systemsequipped with several distributionpoints.
90F/71 91F/71
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
Polyurethane sealsRatio 7:1 Capacity 30 l/min
A
B
C
A
B
C
F L
U I D
O U T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
oils, lubricants
and allied products
polyurethane/PU
aluminium
carbon steelF 1/2”
F 3/4”G
ø 53
1,6 m3 /min
80 dB
8 bar
modular
oils, lubricants
and allied products
polyurethane/PU
carbon steel
carbon steelF 1/2”
F 3/4”G
ø 53
1,6 m3 /min
80 dB
8 bar
modular
oils, lubricants
and allied products
polyurethane/PU
aluminium
carbon steelF 1/2”
F 3/4”G
ø 53
1,6 m3 /min
80 dB
8 bar
with drum (180-200Kg)
oils, lubricants
and allied products
polyurethane/PU
carbon steel
carbon steelF 1/2”
F 3/4”G
ø 53
1,6 m3 /min
80 dB
8 bar
with drum (180-200Kg)
No. 1 packing m 3 0,040
kg 11
No. 1 packing m 3 0,040
kg 12
No. 1 packing m 3 0,070
kg 13
No. 1 packing m 3 0,070
kg 14
Compatible fluids
Type of seals
Suction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. pressure
Suitable for drums or tanks
bar(psi)
(m3 /min)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 172/419
OIL DISPENSER PLATFORM172172
Art. 35200 (R 3:1 - 14 l/min)
Art. 37100 (R 5:1 - 18 l/min)
Art. 37735
Art. 8430.401
Art. 38042
Art. 38071
Art. 996.302
Art. 36094
(for Art. 37100)
for drums 180 - 220 kg
with hose reel
Mobile oil dispenser platform.The ideal combination for
dispensing oil in any workplace.The very easy to handle trolley isequipped with a drum(180 - 220 kg) clamping device,adjustable side support for stowingaccessories, wheel with brake.The platform comes with a handyhose reel with 10 m of hose, anddigital hose end meter
Art. 35194
(for Art. 35200)
Art. 80201Note: By request the platform can be supplied
with other hose reels (refer to page 370)
No. 4 packing m 3 0,210 kg 72,2
No. 4 packing m 3 0,210 kg 73,4
Art. 35200Mobile oil dispenser platform with hose reel, for drumsof 180 - 220 kg, comprising: Art. 35194 pump R 3:1 - 14 l/min
- Art. 80201 heavy duty trolley- Art. 8430.401 hose reel with 10 m hose ø 1/2”- Art. 38042 bung adaptor- Art. 38071 nipple 1/2”x1/2”G M/M- Art. 37735 digital metering gun- Art. 996.302 hose 1/2” - 2 m
Art. 37100Mobile oil dispenser platform with hose reel, for drumsof 180 - 220 kg, comprising: Art. 36094 pump R 5:1 - 18 l/min
- Art. 80201 heavy duty trolley- Art. 8430.401 hose reel with 10 m hose ø 1/2”- Art. 38042 bung adaptor- Art. 38071 nipple 1/2”x1/2”G M/M- Art. 37735 digital metering gun- Art. 996.302 hose 1/2” - 2 m
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 173/419
OIL DISPENSER PLATFORM 173173
Art. 38042
Art. 37735
Art. 996.304
Art. 80201
N° 3 packing m 3 0,176
Art. 35210 (R 3:1 - 14 l/min)
Art. 37150 (R 5:1 - 18 l/min)
OVERALL DIMENSIONS
Measurements approximate also valid for the articleson page
172-173
9 5 0
850 920
1 4 1
0
Mobile oil dispenser platform.The ideal combination for
dispensing oil in any workplace.The very easy to handle trolley isequipped with a drum(180 - 220 kg) clamping device,adjustable side support forstowing accessories, wheel withbrake.
for drums 180 - 220 kg
Art. 36094
(for Art. 37150)
Art. 35194
(for Art. 35210)
Art. 38071
Art. 35210Mobile oil dispenser platform for drums of 180 - 220 kg,comprising: Art. 35194 pump R 3:1 - 14 l/min
- Art. 80201 trolley - Art. 38042 bung adaptor- Art. 38071 nipple 1/2” G M/M - Art. 37735 metering gun- Art. 996.304 hose 1/2”- 4 m
No. 3 packing m 3 0,176 kg 55
No. 3 packing m 3 0,176 kg 56,2
Art. 37150
Mobile oil dispenser platform for drums of 180 - 220 kg,comprising:
Art. 36094 pump R 5:1 - 18 l/min- Art. 80201 trolley - Art. 38042 bung adaptor- Art. 38071 nipple 1/2” G M/M - Art. 37735 metering gun- Art. 996.304 hose 1/2”- 4 m
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 174/419
174174 OIL DISPENSER KIT
OVERALL DIMENSIONS
Art. 35220 (R 3:1 - 14 l/min)
Art. 37200 (R 5:1 - 18 l/min)
Trolley-mounted oil dispenser kit.The ideal combination fordispensing oil in any workplace.
The very easy to handle trolley isequipped with a drum(180 - 220 kg) clamping device andadjustable side support for stowingaccessories.
Art. 37735
Art. 38071
Art. 996.304
Art. 80200700770
8 3 0
1 3
8 0
for drums 180 - 220 kg
Art. 36094
(for Art. 37200)
Art. 35194
(for Art. 35220)
Art. 38042No. 3 packing m 3 0,121 kg 34,1
No. 3 packing m 3 0,121 kg 33,3
Art. 35220Mobile oil dispenser platform for drums of 180 - 220 kg,comprising: Art. 35194 pump R 3:1 - 14 l/min
- Art. 80200 trolley - Art. 38042 bung adaptor- Art. 38071 nipple 1/2” G M/M - Art. 37735 metering gun- Art. 996.304 hose 1/2”- 4 m
Art. 37200
Mobile oil dispenser platform for drums of 180 - 220 kg,comprising:
Art. 36094 pump R 5:1 - 18 l/min- Art. 80200 trolley - Art. 38042 bung adaptor- Art. 38071 nipple 1/2” G M/M - Art. 37735 metering gun- Art. 996.304 hose 1/2”- 4 m
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 175/419
175175OIL DISPENSER KIT
OVERALL DIMENSIONS
Trolley-mounted oil dispenser kit.The ideal combination fordispensing oil in any workplace.
The compact trolley has 2 fixedwheels and 2 castors that make itvery easy to handle.It is equipped with a pump supportand is suitable for holding varioustypes of containers (30 - 50 kg).
Art. 35250 (R 3:1 - 14 l/min)
Art. 37500 (R 5:1 - 18 l/min)
460500
1 1 4 5
1 0 0 0
Art. 80050
for drums 30 - 50 kg
Art. 36073
(for Art. 37500)
Art. 35173
(for Art. 35250)
Art. 37735
Art. 38071
Art. 996.304
No. 3 packing m 3 0,085 kg 20,5
Art. 37500
Trolley-mounted oil dispenser kit for containers of 30 - 50 kg,comprising:
Art. 36073 pump R 5:1 - 18 l/min- Art. 80050 trolley- Art. 38071 nipple 1/2” G M/M- Art. 37735 metering gun- Art. 996.304 hose 1/2”- 4 m
No. 3 packing m 3 0,085 kg 20
Art. 35250Trolley-mounted oil dispenser kit for containers of 30 - 50 kg,comprising: Art. 35173 pump R 3:1 - 14 l/min
- Art. 80050 trolley- Art. 38071 nipple 1/2” G M/M- Art. 37735 metering gun- Art. 996.304 hose 1/2”- 4 m
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 176/419
OIL DISPENSER KIT176176
Oil dispensers, with air-operatedpump suitable for oils of anydensity.
Practical and functional, withwheel-mounted 65-litre tank,they can be used in any workplace.Equipped with an aluminiumdispensing gun, with digitallitre-counter. The version with
pump R 3:1 - 14 l/min. is alsorecommended for dispensingantifreeze liquid.
Art. 35265 (R 3:1 - 14 l/min)
Art. 37650 (R 5:1 - 18 l/min)
Art. 37735
Art. 996.304
Art. 24891
Antisplashfunnel With antisplash rim to preventthe liquid from spilling outwhen filling thetank .
OVERALL DIMENSIONS
1 1 4
5
600
Art. 38071
with 65 l tank
65 l tank
Art. 36073
(for Art. 37650)
Art. 35173
(for Art. 35265)
Art. 35265Oil dispenser with wheel-mounted 65-litre tank, andlevel indicator, equipped with: Art. 35173 pump R 3:1 - 14 l/min
- Art. 38071 nipple 1/2”x1/2”G M/M- Art. 37735 metering gun- Art. 996.304 hose 1/2” - 4 m- Art. 24891 antisplash funnel
Art. 37650
Oil dispenser with wheel-mounted 65-litre tank, andlevel indicator, equipped with:
Art. 36073 pump R 5:1 - 18 l/min- Art. 38071 nipple 1/2”x1/2”G M/M- Art. 37735 metering gun- Art. 996.304 hose 1/2” - 4 m- Art. 24891 antisplash funnel
No. 3 packing m 3 0,230 kg 33
No. 3 packing m 3 0,230 kg 34
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 177/419
OIL DISPENSER KIT 177177
Art. 35270 (R 3:1 - 14 l/min)
Art. 37670 (R 5:1 - 18 l/min)
Oil dispensers, with air-operatedpump suitable for oils of anydensity. Practical and functional,
with wheel-mounted 65-litre tank,they can be used in any workplace.Equipped with an aluminiumdispensing gun. The version withpump R 3:1 - 14 l/min. is alsorecommended for dispensingantifreeze liquid.
OVERALL DIMENSIONS
1 1 4 5
600
Art. 38022
Art. 996.304
Antisplashfunnel With antisplash rim to preventthe liquid from spilling outwhen filling thetank .
with 65 l tank
65 l tank
Art. 36073
(for Art. 37670)
Art. 35173
(for Art. 35270)
Art. 38071
Art. 24891
Art. 35270Oil dispenser with wheel-mounted 65-litre tankand level indicator, equipped with: Art. 35173 pump R 3:1 - 14 l/min
- Art. 38071 nipple 1/2” G M/M- Art. 38022 oil gun- Art. 996.304 hose 1/2” - 4 m- Art. 24891 antisplash funnel
Art. 37670
Oil dispenser with wheel-mounted 65-litre tankand level indicator, equipped with:
Art. 36073 pump R 5:1 - 18 l/min- Art. 38071 nipple 1/2” G M/M- Art. 38022 oil gun- Art. 996.304 hose 1/2” - 4 m- Art. 24891 antisplash funnel
No. 3 packing m 3 0,230 kg 30,9
No. 3 packing m 3 0,230 kg 31,3
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 178/419
178178 PUMPS EQUIPPED FOR DISPENSING OIL
Air-operated pump equipped fordispensing oil and alliedproducts.
A complete solution for fixedstation equipped with hose forcompressed air feeding the pumpand hose with digital metering gunfor delivering fluid.
for drums 180 - 220 kg
Art. 36096
(for Art. 35296)
Art. 996.304 Art. 37735
Art. 35094
(for Art. 35290)
Art. 35196
(for Art. 35293)
Art. 993.201
Art. 35290 (R 3:1 - 20 l/min)
Art. 35293 (R 3:1 - 14 l/min)
Art. 35296 (R 5:1 - 18 l/min)
Art. 37801
Art. 38071
Art. 35293
Oil dispenser pump kit, equipped with: Art. 35196 pump R 3:1 - 14 l/min
- Art. 38071 nipple 1/2”x1/2”G M/M- Art. 37735 metering gun- Art. 996.304 hose 1/2” - 4 m- Art. 37801 pressure regulator with pressure gauge- Art. 993.201 hose 1/4” - 1 m
No. 2 packing m 3 0,070 kg 14
No. 2 packing m 3 0,085 kg 13,5
No. 2 packing m 3 0,085 kg 13,5
Art. 35290Oil dispenser pump kit, equipped with: Art. 35094 pump R 3:1 - 20 l/min
- Art. 38071 nipple 1/2”x1/2”G M/M- Art. 37735 metering gun- Art. 996.304 hose 1/2” - 4 m- Art. 37801 pressure regulator with pressure gauge- Art. 993.201 hose 1/4” - 1 m
Art. 35296
Oil dispenser pump kit, equipped with: Art. 36096 pump R 5:1 - 18 l/min
- Art. 38071 nipple 1/2”x1/2”G M/M- Art. 37735 metering gun- Art. 996.304 hose 1/2” - 4 m- Art. 37801 pressure regulator with pressure gauge- Art. 993.201 hose 1/4” - 1 m
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 179/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 180/419
WALL-MOUNTED OIL DISPENSER KIT180180
OVERALL DIMENSIONS
Oil dispensing systems withpump applied on drum or tank,
equipped with series 420swivelling open hose reel.They enable oil dispensing from anindependent fixed station and withconnection to a centralised systemfor distribution from storage zones.
Art. 88630 Art. 996.302
Art. 8420.401
Art. 37735
Art. 38042
Art. 38071
Art. 35275 (R 3:1 - 14 l/min)
Art. 37675 (R 5:1 - 18 l/min)
9 0 0
2 2 0
0
Art. 36094
(for Art. 37675)
for drums 180 - 220 kg
with open hose reel
Art. 35194
(for Art. 35275)
By request the kits can
be suppliedwith other
hose reels(page 370)
No. 4 packing m 3 0,128 kg 31,1
Art. 35275Wall-mounted oil dispenser kit with pump on drum
180 - 220 kg or tank, comprising: Art. 35194 pump R 3:1 - 14 l/min
- Art. 8420.401 hose reel 10m hose ø 1/2”- Art. 38042 bung adaptor- Art. 38071 nipple 1/2”G M/M- Art. 996.302 hose 1/2”- 2 m- Art. 37735 metering gun- Art. 88630 drip-tray
No. 4 packing m 3 0,128 kg 30,1
Art. 37675
Wall-mounted oil dispenser kit with pump on drum180 - 220 kg or tank, equipped like Art. 35275 but with:
Art. 36094 pump R 5:1 - 18 l/min
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 181/419
WALL-MOUNTED OIL DISPENSER KIT 181181
OVERALL DIMENSIONS
Oil dispensing systems withpump applied
on drum or tank, equipped withseries 440 swivelling enclosedhose reel.They enable oil dispensing from anindependent fixed station and withconnection to a centralisedsystem for distribution fromstorage zones.
Art. 88630 Art. 996.302
Art. 8440.401
Art. 37735
Art. 38042
Art. 38071
Art. 35276 (R 3:1 - 14 l/min)
Art. 37676 (R 5:1 - 18 l/min)
9 0 0
2 2 0
0
Art. 36094
(for Art. 37676)
Art. 35194
(for Art. 35276)
By request the kits can
be suppliedwith other
hose reels(page 374)
for drums 180 - 220 kg
with enclosed hose reel
No. 4 packing m 3 0,130 kg 38,1
No. 4 packing m 3 0,130 kg 37,1
Art. 35276Wall-mounted oil dispenser kit with pump on drum
180 - 220 kg or tank, comprising: Art. 35194 pump R 3:1 - 14 l/min
- Art. 8440.401 enclosed hose reel 10m hose ø 1/2”- Art. 38042 bung adaptor- Art. 38071 nipple 1/2”G M/M- Art. 996.302 hose 1/2”- 2 m- Art. 37735 metering gun- Art. 88630 drip-tray
Art. 37676
Wall-mounted oil dispenser kit with pump on drum180 - 220 kg or tank, equipped like Art. 35276 but with:
Art. 36094 pump R 5:1 - 18 l/min
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 182/419
Art. 35280Wall-mounted oil dispenser kit with pump on wall,
for drums 180 - 220 kg or tank, comprising:- Art. 35160 pump R 3:1 - 14 l/min- Art. 8420.401 hose reel 10m hose ø 1/2”- Art. 38042 bung adaptor- Art. 38043 wall bracket- Art. 38071 nipple 1/2” G M/M- Art. 38026 flexible suction tube 1”- Art. 38027 rigid suction tube- Art. 37735 metering gun- Art. 996.302 hose 1/2”- 2 m- Art. 88630 drip-tray
WALL-MOUNTED OIL DISPENSER KIT182182
OVERALL DIMENSIONS
Oil dispensing systems with
pump applied on wall, equippedwith series 420 swivelling openhose reel. A modular solution enabling oildispensing from an independentfixed station and with connectionto a centralised system fordistribution from storage zones.
Art. 35280 (R 3:1 - 14 l/min)
Art. 37680 (R 5:1 - 18 l/min)
Art. 38026
Art. 36060
(for Art. 37680)
Art. 38027
Art. 38042
Art. 88630
Art. 8420.401
Art. 37735
Art. 996.302
Art. 38043
2 2 0 0
1 7 0 0
600
9 0 0
Art. 35160
(for Art. 35280)
By request the kits can
be suppliedwith other
hose reels(page 370)
for drums 180 - 220 kg
with pumpand open hose reel
Art. 38071
No. 4 packing m 3 0,130 kg 38,5
Art. 37680
Wall-mounted oil dispenser kit with pump on wall for drums
180 - 220 kg or tank, equipped like Art. 35280 but with: Art. 36060 pump R 5:1 - 18 l/min
No. 4 packing m 3 0,130 kg 39,5
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 183/419
Art. 35281Wall-mounted oil dispenser kit with pump on wall,
for drums 180 - 220 kg or tank, comprising: Art. 35160 pump R 3:1 - 14 l/min
- Art. 8440.401 enclosed hose reel 10m hose ø 1/2”- Art. 38042 bung adaptor- Art. 38043 wall bracket- Art. 38071 nipple 1/2” G M/M- Art. 38026 flexible suction tube 1”- Art. 38027 rigid suction tube- Art. 37735 metering gun- Art. 996.302 hose 1/2”- 2 m- Art. 88630 drip-tray
No. 4 packing m 3 0,135 kg 45
No. 4 packing m 3 0,135 kg 45
Art. 37679
Wall-mounted oil dispenser kit equipped like Art. 35280but with:- Art. 36060 pump R 5:1 - 18 l/min
WALL-MOUNTED OIL DISPENSER KIT 183183
OVERALL DIMENSIONS
Oil dispensing systems with
pump applied on wall, equippedwith series 440 swivellingenclosed hose reel. A modular solution enabling oildispensing from an independentfixed station and with connectionto a centralised system fordistribution from storage zones.
Art. 35281 (R 3:1 - 14 l/min)
Art. 37679 (R 5:1 - 18 l/min)
Art. 36060
(for Art. 37679)
Art. 88630
Art. 8440.401
Art. 37735
Art. 996.302
Art. 38043
2 2 0 0
1 7 0 0
600
9 0 0
Art. 38071
Art. 35160
(for Art. 35281) By request the kits can
be supplied with other
hose reels(page 374)
for drums 180 - 220 kg
with pumpand enclosed hose reel
Art. 38026
Art. 38027
Art. 38042
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 184/419
Art. 33100Modular wall-mounted kit, for transfer from drums
180 - 220 kg, complete with:- Art. 33070 pump R 1:1 - 23 l/min - VITON seals- Art. 33115 wall bracket- Art. 38042 bung adaptor- Art. 38026 flexible suction tube- Art. 38027 rigid suction tube
Art. 33510
Modular wall-mounted kit, for transfer from drums180 - 220 kg, equipped like:- Art. 33/101260 diaphragm pump series 1/2”
R 1:1 - 60 l/min - NBR Hight Nitrile seals- Art. 33590 wall bracket
- Art. 33434 bung adaptor- Art. 38026 flexible suction tube- Art. 33581 rigid suction tube
184184 MODULAR TRANSFER KIT
Art. 33100 (R 1:1 - 23 l/min)
Art. 33200 (R 1:1 - 40 l/min)
Art. 33510 (R 1:1 - 60 l/min)
Modular wall-mounted kit fortransfer from drums. Ideal for
transferring low/medium-viscosityfluids such as: oil, antifreeze liquid,diesel oil, etc. Wall-mounting, withconnection to a fixed systemenables liquids to be transferredfrom the place of storage to theservice station. The rigid suctiontube (Art. 38027) can be lengthenedby means of modular elements(refer to page 232) for adapting tothe height of the tanks.
Art. 33115
Art. 38027
(for Art. 3310033200)
Art. 38042
(for Art.33100 - 33200)
Art. 33170
(for Art. 33200)
Art. 33070
(for Art. 33100)
Art. 38026
Art. 33/101260
(for Art. 33510)
Art. 33590
for drums 180 - 220 kg
with wall-mounted pump
Art. 33581
(for Art. 33510)
Art. 33434
(for Art. 33510)
No. 1 packing m 3 0,029 kg 10,4
No. 1 packing m 3 0,029 kg 11,4
No. 2 packing m 3 0,040 kg 15
Art. 33200
Modular wall-mounted kit, for transfer from drums180 - 220 kg, equipped like Art. 33100 but with Art. 33170 pump R1:1 - 40 l/m - VITON seals
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 185/419
MODULAR TRANSFER KIT 185185
Art. 35285 (R 3:1 - 14 l/min)
Art. 37685 (R 5:1 - 18 l/min)
Oil dispensing system with pumpapplied on wall.
A modular solution enabling oildispensing with connection to acentralised system, a hose reel ordirectly to the delivery hose.Ideal for distribution from storagezones. The rigid suction tube(Art. 38027) can be lengthened bymeans of modular elements(refer to page 232) for adapting to theheight of the tanks.
OVERALL DIMENSIONS
600
1 5 0 0
Art. 38026
Art. 38027
Art. 38042
Art. 35160
(for Art. 35285)
Art. 38043
Art. 36060
(for Art. 37685)
for drums 180 - 220 kg
with wall-mounted pump
The rigid suctiontube can be lengthened by means of modular elements(refer to page 232) for adaptingto the height of the tanks.
No. 1 packing m 3 0,029 kg 11,9
Art. 37685
Modular wall-mounted kit, for dispensing from trade drums180 - 220 kg or tank comprising: Art. 36060 pump R 5:1 - 18 l/min
- Art. 38043 wall bracket- Art. 38042 bung adaptor- Art. 38026 flexible suction tube- Art. 38027 rigid suction tube
No. 1 packing m 3 0,029 kg 11,4
Art. 35285Modular wall-mounted kit, for dispensing from tradedrums 180 - 220 kg or tank, comprising: Art. 35160 pump R 3:1 - 14 l/min
- Art. 38043 wall bracket- Art. 38042 bung adaptor- Art. 38026 flexible suction tube- Art. 38027 rigid suction tube
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 186/419
186186 DRAINING KIT
Wall-mounted transfer kit. A practical solution for draining
movable equipment, waste oilsuction/drainers by means ofconnection with quick-couplingvalve. Wall application enablesconnection to a fixed system fordischarging the sucked liquiddirectly into the storage tank.
Art. 33127
Art. 33126
Art. 33119
Art. 33115
Art. A605
Art. 33070
(for Art. 33125)
Art. 38026
Threadedunion 1”F,to be applied the flexible tube
for receiving a quick-connectorfor pumpconnection totank to beemptied
Art. 33118
Art. 33125 (R 1:1 - 23 l/min)
Art. 33550 (R 1:1 - 60 l/min)
Art. 33/101260
(for Art. 33550)
for containersand tanks
Art. 33590
Suction filter
No. 1 packing m 3 0,029 kg 8,4
Art. 33119
Nipple 1”x 3/4” G connection M/M
Art. 33126
Female quick connector with check valve, thread 3/4” F
Art. 33127
Male quick connector with check valve, thread 3/4” F
Art. 33118
Nipple 1/2”x 3/4” G connection M/M
No. 1 packing m 3 0,030 kg 14
Art. 33125Wall-mounted draining kit, complete with: Art. 33070 pump R 1:1 - 23 l/min - VITON seals
- Art. 33115 wall bracket- Art. 38026 flexible suction tube
- air inlet flow regulator
Art. 33550
Wall-mounted draining kit, complete with: Art. 33/101260 diaphragm pump series 1/2”
R 1:1 - 60 l/min - NBR High Nitrile seals
- Art. 33590 wall bracket- Art. 38026 flexible suction tube- air inlet flow regulator
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 187/419
187187DRAINING KIT
Art. 33119 Art. 33126
Art. 33127
Art. 33118
Art. 33119
Art. 33127
Art. 33126
Art. 33119
Art. 33119
Art. 33126
Art. 33127
Art. 33118
Wall-mounted transfer kit. A practical solution for draining
movable equipment, waste oilsuction/drainers by means ofconnection with quick-couplingvalve. Wall application enablesconnection to a fixed system fordischarging the sucked liquiddirectly into the storage tank.
Art. 33124 (R 1:1 - 35 l/min)
Art. 33135 (R 3:1 - 20 l/min)
Art. 33127
Art. 33126
Art. 33119
for containersand tanks
Art. 33118
Art. 33124Wall-mounted draining kit, complete with: Art. 26090 pump R 1:1 - 35 l/min - VITON seals
- Art. 38052 wall bracket- Art. 38026 flexible suction tube
- air inlet flow regulator
No. 1 packing m 3 0,030 kg 8,7
Art. 33135
Wall-mounted draining kit, complete with: Art. 35060 pump R 3:1 - 20 l/min - VITON seals
- Art. 38047 wall bracket- Art. 38026 flexible suction tube
- air inlet flow regulator
No. 1 packing m 3 0,030 kg 8,5
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 188/419
188188 WALL-MOUNTED KIT FOR TRANSFER FROM TANK
Art. 33115
Check valvewith 1” M connection,to be applied toflexible suction tube.Enables connectionto the tank drainingcock by means of a special elbow.
Wall-mounted kit for transfer fromtank. A practical solution for transferring high
quantities of oil, waste oil, etc., fromtank to other containers.The suction tube and 1” M threadedvalve enable easy connection to thestorage tank.
Art. 33110 (R 1:1 - 23 l/min)
Art. 33210 (R 1:1 - 40 l/min)
Art. 33530 (R 1:1 - 60 l/min)
Art. 38091
Art. 33170
(for Art. 33210)
Art. 33070
(for Art. 33110)
Art. 33/101260
(for Art. 33530)
with wall-mounted pump
Art. 33590
Art. 38026
No. 1 packing m 3 0,029 kg 9,6
No. 1 packing m 3 0,029 kg 8,6
Art. 33530
Wall-mounted kit, for transfer from tank, complete with: Art. 33/101260 diaphragm pump series 1/2”
R 1:1 - 60 l/min - NBR High Nitrile seals- Art. 33590 wall bracket
- Art. 38026 flexible suction tube- Art. 38091 check valve
Art. 33210
Wall-mounted kit, for transfer from tank, complete with:
Art. 33170 pump R 1:1 - 40 l/min - VITON seals- Art. 33115 wall bracket- Art. 38026 flexible suction tube- Art. 38091 check valve
Art. 33110Wall-mounted kit, for transfer from tank, complete with: Art. 33070 pump R 1:1 - 23 l/min - VITON seals
- Art. 33115 wall bracket- Art. 38026 flexible suction tube- Art. 38091 check valve
No. 1 packing m 3 0,030 kg 15
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 189/419
WALL-MOUNTED KIT FOR DISPENSING FROM TANK 189189
Art. 38043
Art. 38026
Check valvewith 1” M connection,to be applied toflexible suction tube.
Enables connectionto the tank drainingcock by means of a special elbow.
Wall-mounted kit for dispensingoil with pump connected to tank.Enables oil dispensing with
connection to a centralisedsystem for distribution fromstorage zones.The suction tube and 1” Mthreaded valve enable easyconnection to the storage tank.
Art. 36420 (R 5:1 - 18 l/min)
Art. 36430 (R 5:1 - 45 l/min)
Art. 36530 (R 7:1 - 30 l/min)
Art. 38091
Art. 36060
(for Art. 36420)
Art. 90C/71
(for Art. 36530)
Art. 90C/51
(for Art. 36430)
with wall-mounted pump
Art. 10/10
Art. 36430
Wall-mounted kit, for dispensing from tank,
complete with: Art. 90C/51 pump R 5:1 - 45 l/min
- Art. 10/10 wall bracket- Art. 38026 flexible suction tube- Art. 38091 check valve
No. 1 packing m 3 0,029 kg 9,9
Art. 36420Wall-mounted kit, for dispensing from tank,complete with: Art. 36060 pump R 5:1 - 18 l/min
- Art. 38043 wall bracket- Art. 38026 flexible suction tube- Art. 38091 check valve
Art. 36530
Wall-mounted kit, for dispensing from tank,
complete with: Art. 90C/71 pump R 7:1 - 30 l/min
- Art. 10/10 wall bracket
- Art. 38026 flexible suction tube- Art. 38091 check valve
No. 1 packing m 3 0,050 kg 17,6
No. 1 packing m 3 0,050 kg 16,6
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 190/419
190190 WALL-MOUNTED KIT FOR DISPENSING FROM TANK
System for oil dispensing fromtank with pump applied on wall. A modular solution for oil delivery
with connection to a centralisedsystem or hose reel or directly tothe delivery hose. Ideal fordistribution from storage zones.Complete with accessories forconnection to the compressed airsystem and dispensing system.
with wall-mounted pump
Note: The tank is not part of the Kit
Art. 38071
Art. 38026
Art. 38055
Art. 36060
(for Art. 36330)
Art. 35160
(for Art. 35330)
Art. 38043 Art. 996.301
Art. 993.201
Art. 33434
Art. 38210
Art. 37812
Art. 35330 (R 3:1 - 14 l/min)
Art. 36330 (R 5:1 - 18 l/min)
No. 2 packing m 3 0,040 kg 16
No. 2 packing m 3 0,040 kg 15
Art. 35330Modular wall-mounted kit for tank, complete with: Art. 35160 pump R 3:1 - 14 l/min
- Art. 38043 wall bracket- Art. 33434 bung adaptor- Art. 38026 flexible suction tube- Art. 38055 rigid suction tube 1260 mm- Art. 993.201 tube 1/4” - 1 m- Art. 996.301 tube 1/2” - 1 m- Art. 38210 cock 1/2”- Art. 38071 nipple 1/2”x1/2” G - M/M- Art. 37812 condensate discharge regulator with lubricator
Art. 36330
Modular wall-mounted kit for tank, complete with: Art. 36060 pump R 5:1 - 18 l/min
- Art. 38043 wall bracket- Art. 33434 bung adaptor- Art. 38026 flexible suction tube- Art. 38055 rigid suction tube 1260 mm- Art. 993.201 tube 1/4” - 1 m- Art. 996.301 tube 1/2” - 1 m- Art. 38210 cock 1/2”- Art. 38071 nipple 1/2”x1/2” G - M/M
- Art. 37812 condensate discharge regulator with lubricator
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 191/419
WALL-MOUNTED KIT FOR DISPENSING FROM TANK 191191
System for oil dispensing fromtank, with pump applied on wall. A modular solution for oil delivery
with connection to a centralisedsystem or hose reel or directly tothe delivery hose. Ideal fordistribution from storage zones.Complete with accessories forconnection to the compressed airsystem and dispensing system.
with wall-mounted pump
Note: The tank is not part of the Kit
Art. 36340 (R 5:1 - 45 l/min)
Art. 36350 (R 7:1 - 30 l/min)
Art. 33119
Art. 38026
Art. 38055
Art. 90C/71
(for Art. 36350)
Art. 90C/51
(for Art. 36340)
Art. 10/10
Art. 998.501
Art. 996.301
Art. 33434
Art. 38211
Art. 37817
No. 2 packing m 3 0,120 kg 23
Art. 36340Modular wall-mounted kit for tank, complete with: Art. 90C/51 pump R 5:1 - 45 l/min
- Art. 10/10 wall bracket- Art. 33434 bung adaptor- Art. 38026 flexible suction tube- Art. 38055 rigid suction tube 1260 mm- Art. 996.301 tube 1/2” - 1 m- Art. 998.501 tube 1” - 1 m- Art. 38211 cock 1”- Art. 33119 nipple 1” x 3/4” G - M/M- Art. 37817 condensate discharge regulator with lubricator
No. 2 packing m 3 0,120 kg 22
Art. 36350
Modular wall-mounted kit for tank, complete with: Art. 90C/71 pump R 7:1 - 30 l/min
- Art. 10/10 wall bracket- Art. 33434 bung adaptor- Art. 38026 flexible suction tube- Art. 38055 rigid suction tube 1260 mm- Art. 996.301 tube 1/2” - 1 m- Art. 998.501 tube 1” - 1 m- Art. 38211 cock 1”- Art. 33119 nipple 1” x 3/4” G - M/M
- Art. 37817 condensate discharge regulator with lubricator
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 192/419
192192 KIT FOR DISPENSING FROM TANK
System for dispensing from tankwith pump applied to the drain.
A complete solution for dispensingoil and allied products.The dispensing pump and hose reelare fixed directly to the tank bymeans of sturdy brackets. Thepump connection is fixed to thetank drain.
with pump connectedto tank drain
Note: The tank is not part of the Kit
Art. 36650 (R 3:1 - 14 l/min)
Art. 36660 (R 5:1 - 18 l/min)
Art. 36670 (R 5:1 - 45 l/min)
Art. 36675 (R 7:1 - 30 l/min)
Art. 8540.401
(for Art. 36670)
Art. 8430.401
(for Art. 36650)
Art. 88630 Art. 37735
(for Art. 36650)
Art. 38091
Art. 38028
Art. 38043
Art. 10/10
Art. 90C/51
(for Art. 36670)
Art. 35160
(for Art. 36650)
Art. 36060
(for Art. 36660)
Art. 37771
(for Art. 36670)
Art. 90C/71
(for Art. 36675)
Art. 38071
Art. 33119
No. 4 packing m 3 0,260 kg 51
No. 4 packing m 3 0,280 kg 72
No. 4 packing m 3 0,280 kg 71
No. 4 packing m 3 0,260 kg 50
Art. 36660
Dispensing kit for oil and allied products, equipped like
Art. 36650 but with: Art. 36060 pump R 5:1 - 18 l/min
Art. 36670
Dispensing kit for oil and allied products with pumpconnected to the tank drain and hose reel, complete with: Art. 90C/51 pump R 5:1 - 45 l/min
- Art. 10/10 pump support bracket- Art. 8540.401 hose reel with 15 m hose ø 3/4”- Art. 38028 flexible suction hose- Art. 38091 check valve - Art. 37771 metering gun1/2”- Art. 36641 support bracket - Art. 88630 drip tray- Art. 33119 nipple 1” x 3/4” G - MM
Art. 36675
Dispensing kit for oil, equipped like Art. 36670 but with: Art. 90C/71 pump R 7:1 - 30 l/min
Art. 36650Dispensing kit for oil and allied products with pumpconnected to the tank drain and hose reel, complete with: Art. 35160 pump R 3:1 - 14 l/min
- Art. 38043 pump support bracket- Art. 8430.401 hose reel with 10 m hose ø 1/2”- Art. 38028 flexible suction hose - Art. 38091 check valve- Art. 37735 metering gun - Art. 36641 support bracket- Art. 88630 drip tray - Art. 38071 nipple 1/2” x1/2” G M/M
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 193/419
KIT FOR DISPENSING FROM TANK 193193
with pump connectedto tank drain
System for dispensing from tankwith pump applied to the drain.
A complete solution for dispensingoil and allied products.The dispensing pump and hose reelare fixed directly to the tank bymeans of sturdy brackets. Thepump connection is fixed to thetank drain.
Note:The tank is not part of the Kit
Art. 36641
Bracket for 1 m
width tank
Art. 36651 (R 3:1 - 14 l/min)
Art. 36661 (R 5:1 - 18 l/min)
Art. 8450.401
Art. 88630
Art. 37735
Art. 38091
Art. 38028
Art. 38043
Art. 35160
(for Art. 36651)
Art. 36060
(for Art. 36661)
Art. 38071
No. 1 packing m 3 0,029 kg 12
No. 4 packing m 3 0,270 kg 55
Art. 36641
Tank fixing bracket for pump and hose reel
Art. 36661Dispensing kit for oil equipped like Art. 36651 but with: Art. 36060 pump R 5:1 - 18 l/min
No. 4 packing m 3 0,270 kg 56
Art. 36651Dispensing kit for oil and allied products with pumpconnected to the tank drain and hose reel, complete with: Art. 35160 pump R 3:1 - 14 l/min
- Art. 38043 pump support bracket- Art. 8450.401 hose reel with 10 m hose ø 1/2”- Art. 38028 flexible suction hose- Art. 38091 check valve- Art. 37735 metering gun- Art. 36641 support bracket- Art. 88630 drip tray- Art. 38071 nipple 1/2” x1/2” G M/M
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 194/419
194194 PUMP KIT PLUS ACCESSORIES FOR TANK
with central pumpsuction tube 960 mm
Oil dispensing system with pumpapplied directly to tank.
A modular solution for oil deliverywith connection to a centralisedsystem or hose reel or directly tothe delivery hose. Ideal fordistribution from storage zones.Complete with accessories forconnection to the compressed airsystem and dispensing system.
Art. 35310 (R 3:1 - 14 l/min)
Art. 35312 (R 3:1 - 14 l/min)
Art. 36310 (R 5:1 - 18 l/min)
Art. 36312 (R 5:1 - 18 l/min)
Note:The tank is not part of the Kit
Art. 38071
Art. 10/22
Art. 36060
(for Art. 36310 Art. 36312)
Art. 35160
(for Art. 35310 Art. 35312)
Art. 10/20
(for Art 35310 - 36310)
Art. 996.302
Art. 993.202
Art. 38210
Art. 37812
Art. 38042
Art. 36602
Art. 38090
(for Art 35312 - 36312)
No. 2 packing m 3 0,090 kg 19
No. 2 packing m 3 0,090 kg 18
No. 2 packing m 3 0,090 kg 19
Art. 36310
Modular kit for tank equipped like Art. 35310 but with: Art. 36060 pump R 5:1 - 18 l/min
Art. 35312Modular kit for tank equipped like Art. 35310 but with Art. 38090 filter-valve air intake stop for suction tube.
No. 2 packing m 3 0,090 kg 18
Art. 35310Modular kit for tank, complete with: Art. 35160 pump R 3:1 - 14 l/min
- Art. 38042 bung adaptor- Art. 10/22 extension 660 mm- Art. 10/20 suction tube valve-filter- Art. 993.202 tube1/4”- 2 m - Art. 996/302 tube 1/2” - 2 m- Art. 38210 cock 1/2”- Art. 38071 nipple 1/2” x 1/2” G - M/M- Art. 37812 condensate discharge regulator with lubricator- Art. 36602 tank support bracket
Art. 36312
Modular kit for tank equipped like Art. 36310 but with Art. 38090 ilter-valve air intake stop for suction tube.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 195/419
PUMP KIT PLUS ACCESSORIES FOR TANK 195195
with central pumpsuction tube 1260 mm
Oil dispensing system with pumpapplied directly to tank.
A modular solution for oil deliverywith connection to a centralisedsystem or hose reel or directly tothe delivery hose. Ideal fordistribution from storage zones.Complete with accessories forconnection to the compressed airsystem and dispensing system.
Art. 35320 (R 3:1 - 14 l/min)
Art. 35322 (R 3:1 - 14 l/min)
Art. 36320 (R 5:1 - 18 l/min)
Art. 36322 (R 5:1 - 18 l/min)
Note:The tank is not part of the Kit
Art. 38071
Art. 10/23
Art. 36060
(for Art. 36320 Art. 36322)
Art. 35160
(for Art. 35320 Art. 35322)
Art. 10/20
(for Art 35320 - 36320)
Art. 996.302
Art. 993.202
Art. 38210
Art. 37812
Art. 38042
Art. 36602
Art. 38090
(for Art 35322 - 36322)
No. 2 packing m 3 0,090 kg 20
No. 2 packing m 3 0,090 kg 19
No. 2 packing m 3 0,090 kg 19
Art. 35320Modular kit for tank, complete with: Art. 35160 pump R 3:1 - 14 l/min
- Art. 38042 bung adaptor- Art. 10/23 extension 960 mm- Art. 10/20 suction tube valve-filter- Art. 993.202 tube1/4”- 2 m - Art. 996/302 tube 1/2” - 2 m- Art. 38210 cock 1/2”- Art. 38071 nipple 1/2” x 1/2” G - M/M- Art. 37812 condensate discharge regulator with lubricator- Art. 36602 tank support bracket
Art. 35322Modular kit for tank equipped like Art. 35320 but with Art. 38090 filter-valve air intake stop for suction tube.
Art. 36322
Modular kit for tank equipped like Art. 36320 but with Art. 38090 filter valve air intake stop for suction tube.
Art. 36320
Modular kit for tank equipped like Art. 35320 but with: Art. 36060 pump R 5:1 - 18 l/min
No. 2 packing m 3 0,090 kg 20
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 196/419
Art. 36610Dispensing kit for oil and allied products with pumpinserted centrally and enclosed hose reel, complete with: Art. 35163 pump R 3:1 - 14 l/min
- Art. 36601 support bracket- Art. 8430.401 hose reel with 10 m hose ø 1/2”- Art. 37735 meternig gun- Art. 38071 nipple 1/2” x 1/2” G M/M- Art. 88630 drip tray
Art. 36630
Dispensing kit for oil and allied products with pump
inserted centrally and enclosed hose reel complete with:- Art. 92C/71 pump R 7:1 - 30 l/min
- Art. 36601 support bracket- Art. 8540.401 hose reel with 15 m hose ø 3/4”- Art. 37771 meternig gun- Art. 33119 nipple 1” x 3/4” G M/M- Art. 10/15 bung adaptor ø 53- Art. 88630 drip tray
196196 TANK DISPENSING KIT
Kit for dispensing from tank. A complete solution for dispensing
oil and allied products.The dispensing pump and theenclosed hose reel are fixeddirectly to the tank by means ofsturdy brackets.
Note:The tank is not part of the Kit
Art. 36610 (R 3:1 - 14 l/min)
Art. 36620 (R 5:1 - 18 l/min)
Art. 36630 (R 7:1 - 30 l/min)
Art. 92C/71
(for Art 36630)
Art. 88630
Art. 37735
(for Art 36610 - 36620)
Art. 10/15
Art. 37771
(for Art 36630)
Art. 35163
(for Art 36610)
Art. 36063
(for Art 36620)
Art. 38071
Art. 33119
with central pumpand open hose reel
Art. 8540.401
(for Art 36630)
Art. 8430.401
(for Art 36610 - 36620)
No. 4 packing m 3 0,270 kg 70
No. 4 packing m 3 0,250 kg 49
No. 4 packing m 3 0,250 kg 48
Art. 36620
Dispensing kit for oil and allied products, equipped like
Art. 36610 but with pump: Art. 36063 pump R 5:1 - 18 l/min
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 197/419
TANK DISPENSING KIT 197197
Kit for dispensing from tank. A complete solution for dispensing
oil and allied products.The dispensing pump and theenclosed hose reel are fixeddirectly to the tank by means ofsturdy brackets.
Art. 36601
Bracket for 1 m
width tank
Note:The tank is not part of the Kit
Art. 36611 (R 3:1 - 14 l/min)
Art. 36621 (R 5:1 - 18 l/min)
Art. 8450.401
(for Art 36611 - 36621)
Art. 88630 Art. 37735
(for Art. 3661136621)
Art. 35163
(for Art 36611)
Art. 36063
(for Art 36621)
Art. 38071
with central pumpand enclosed hose reel
No. 4 packing m 3 0,260 kg 53
Art. 36611Dispensing kit for oil and allied products with pumpinserted centrally and enclosed hose reel, complete with:
Art. 35163 pump R 3:1 - 14 l/min- Art. 36601 support bracket- Art. 8450.401 hose reel with 10 m hose ø 1/2”- Art. 37735 meternig gun- Art. 38071 nipple 1/2” x 1/2” G M/M- Art. 88630 drip tray
Art. 36621
Dispensing kit for oil and allied products, equipped like
Art. 36611 but with pump: Art. 36063 pump R 5:1 - 18 l/min
No. 4 packing m 3 0,260 kg 54
No. 1 packing m 3 0,029 kg 8,6
Art. 36601
Drum fixing brackets for pump and hose reel
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 198/419
OIL BAR198198
Art. 37686
Oil bar ideal for dispensingoil and antifreeze liquid.Fed by air pump or with
connection to a centralised system.It offers the availability of up to3 different types of oil andantifreeze liquid.Quick and easy drawing of oil withpossibility of controlling thequantity by means of the digitallitre-counter.
Note: A max. of 3 taps and 3 digital litre-counter kits can be fitted on the oil bar. For other combinations according to needs(see accessories on page 202)
wall-mounted
Art. 37690Oil bar equipped with 1 tap (Art. 37692)
No. 1 packing m 3 0,136 kg 25
No. 1 packing m 3 0,136 kg 26,5
No. 1 packing m 3 0,136 kg 28No. 1 packing m 3 0,136 kg 26,2
No. 1 packing m 3 0,136 kg 25,0
No. 1 packing m 3 0,136 kg 23,8
Art. 37689
Oil bar equipped with 2 taps (Art. 37692)
Art. 37688
Oil bar equipped with 3 taps (Art. 37692)
Art. 37691Oil bar equipped with 1 tap (Art. 37692)and 1 digital litre-counter kit (Art. 37694)
Art. 37687
Oil bar equipped with 2 taps (Art. 37692)and 2 digital litre-counter kits (Art. 37694)
Art. 37686
Oil bar equipped with 3 taps (Art. 37692)and 3 digital litre-counter kits (Art. 37694)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 199/419
TECHNICAL CHARACTERISTICS 199199
Tap with double valve and antisplashfilter to guarantee deliverywhile preventing sprayscaused by possible air bubbles in the system. Closing is automaticwhen the lever is released. STOP
Installation of an oil bar equipped with 3 taps and fed by air pump through hoses (Art. 37695). After connecting the compressed air system to the feed pump, delivery is activated by operating the tap lever. Connection recommended for short distances.
Installation of an oil bar equipped with 3 taps and fed by air pump through a centralised system. The oil bar is connected to thecentralised system by means of a 60 cm hose (Art. 37693). After connecting the compressed air system to the feed pump, delivery is
activated by operating the tap lever.
Equipped with an easy to clean, removable drip-catcher tray and sturdy support grid.
OVERALL DIMENSIONS
6 7
0
4 6 0
165
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 200/419
OIL BAR200200
Art. 37697
Art. 37698
Art. 37699
Art. 37683
Important: Do not use flammable or corrosive liquids.
Drum oil bar.Ideal for dispensing oil andantifreeze liquid. The delivery tap is
connected directly to the feedpump. Very compact, it enablesquick filling of jugs or other smallcontainers.
for oil from drum
No. 2 packing m 3 0,034 kg 12
Art. 37697Oil bar for drums, equipped with:- Art. 35194 pump R 3:1 - 14 l/min- Art. 38042 bung adaptor- Art. 37683 tap for oil bar with connection to pump- Art. 37699 drip-catcher tray
No. 2 packing m 3 0,025 kg 9,5
No. 1 packing m 3 0,014 kg 2,5
Art. 37699
Drip-catcher tray
Art. 37698
Oil bar for drums, equipped with:- Art. 35194 pump R 3:1 - 14 l/min
- Art. 38042 bung adaptor- Art. 37683 tap for oil bar with connection to pump
Art. 37683
Tap for oil bar with connection to pump,
equipped with:
- Art. 37681 tap for oil bar- Art. 37682 tap/pump connection hose
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 201/419
Art. 33501
Kit with drum pump for feeding oil bar,
equipped with:- Art. 33500 diaphragm pump R 1:1 - 60 l/min
- Art. 996.304 tube 1/2”- 4 m- Art. 33118 nipple 3/4”x1/2” M/M- elbow M/F 1/2”- nipple MF 1/2”
KIT FOR OIL BAR 201201
Art. 33501 (R 1:1 - 60 l/min)
Art. 37695 (R 3:1 - 14 l/min)
The kit , is recommended for short-distance connections(3 - 4 m). One kit is necessaryfor each oil bar tap.
Note: the oil bar can be fed by all the oil dispensing pumps ofthe RAASM range
Art. 38042
Art. 33500
(for Art. 33501)
Art. 996.304
elbowM/M 1/2” M/F 1/2”
nippleM/F 1/2”
Art. 33118
Art. 35194
(for Art. 37695)
feed pump
Kit for feeding the oil bar with pumpR 3:1 or with diaphragm pumpseries 1/2”.
Recommended for short-distanceconnections (3 - 4 m) from the storagepoint. One kit is necessary for eachoil bar tap. After connecting thecompressed air system to the feedpump, delivery is activated byoperating the tap lever.
No. 2 packing m 3 0,050 kg 14
No. 2 packing m 3 0,033 kg 9,3
Art. 37695Kit with drum pump for feeding oil bar,
equipped with: Art. 35194 pump R 3:1 - 14 l/min
- Art. 38042 bung adaptor- Art. 996.304 hose 1/2” – 4 m- elbow MM 1/2”- nipple MF1/2”
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 202/419
OIL BAR ACCESSORIES202202
Articles not manufactured by us
Art. 38102
2-litre jug
Art. 38105
5-litre jug
STOP
Art. 37681
Double valve tap for oil bar
Art. 37682
Pump oil bar tap connection tube
Art. 37693
Kit for connecting oil bar to fixed system,
equipped with:- Art. 996.301 tube 1/2” M/F - 1 m- elbow M/F 1/2”- nipple M/F 1/2”
Art. 37694
Digital litre-counter kit for oil bar, equipped with:- Art. 37722 digital litre-counter- connection unions
Art. 37692
Double valve tap with antisplash filter for oil bar
( * )
Art. 37692
Art. 37681
Art. 37682
Art. 37693
Art. 37694
Art. 38102
Art. 38105
( * )
Both articles guarantee maximum delivery while preventing sprays caused by possible air bubbles in the system.Closing is automatic upon releasing the lever.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 203/419
HOSE REEL KIT 203203
No. 3 packing m 3 0,180 kg 52
No. 3 packing m 3 0,180 kg 45
No. 3 packing m 3 0,120 kg 35
No. 3 packing m 3 0,110 kg 30
Art. 36910Kit for oil and similar with open hose reel, complete with:- Art. 8420.401 hose reel with 10 m hose ø 1/2” - 150 bar- Art. 37735 oil gun with digital litre-counter- Art. 88630 modular drip-tray
Art. 36912
Kit for oil and similar with enclosed hose reel, complete with:- Art. 8440.401 hose reel with 10 m hose ø 1/2” - 150 bar- Art. 37735 oil gun with digital litre-counter- Art. 88630 modular drip-tray
Art. 36920
Kit for oil and similar with open hose reel, complete with:- Art. 8550.401 hose reel with 10 m hose ø 3/4” - 150 bar- Art. 37771 oil gun with digital litre-counter- Art. 33275 nipple 3/4”x1/2” F/M- Art. 88630 modular drip-tray
Art. 36930
Kit for oil and similar with open hose reel, complete with:- Art. 8540.403 hose reel with 15 m hose ø 1” - 150 bar- Art. 33153 high capacity oil gun- Art. 33276 nipple 1”x3/4” F/M- Art. 88630 modular drip-tray
Art. 88630Modular drip-tray. Equipped with hook for gun andremovable drip-tray. Applied under the hose reel, it is ahandy holder for the delivery gun. Essential for a clean andorderly workplace.
Art. 36910 Art. 36920 Art. 36930
Art. 88630
Art. 8420.401
(for Art. 36910)
Art. 8440.401
(for Art. 36912)
Art. 8550.401
(for Art. 36920)
Art. 8540.403
(for Art. 36930)
Art. 88630
for other hose reels see page 370for other guns see page 210
Art. 37735
Art. 33153
Art. 37771
Complete open and enclosed hose
reel kits for dispensing oil andallied products.They can be supplied with 1/2” or3/4” and 1” hose and with series3/8”, series 1/2” and 3/4” guns. Application is by connection to afixed system or directly to theair-operated dispensing pump.
open - enclosedhose reel
for oil and allied products
Art. 36912
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 204/419
VOLUMETRIC METERS204204
Art. 37722
DIMO digital litre-counter (weight 570 g) for oil andantifreeze liquid, equiipped with:- connection F/F 1/2”- standard penlight battery powered
Art. 37711
Digital litre-counter (weight 640 g) for oil and antifreezeliquid, equipped with:- connection F/F 1/2”- long-life welded battery powered
Art. 37701
Mechanical litre-counter (weight 1 kg) for oil,equipped with:- connection F/F 1/2”- indicator 0-10 litres
Not type-approved for public use
Art. 37711
Art. 37701
Art. 37722
Articles not manufactured by us( * )
( * )
( * )
( * )
( * )
( * )
( * )
( * )
Standard in alloil dispensing kits equippedwith digital litre-counter.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 205/419
VOLUMETRIC METERS 205205
Art. 33701
Compatible fluids
Inlet
Outlet
Min. delivery
Max. delivery
Max. pressure
Tolerance
Max. viscosity
Weight
37722
oils, lubricants
and similar
1/2” F
1/2” F
1 l/min
20 l/min
60 bar
+/- 0,5%
SAE 240
570 g
diesel oil
1” F
1” F
10 l/min
100 l/min
30 bar
+/- 0,5%
diesel oil
1600 g
Article 37711
oils, lubricants
and similar
1/2” F
1/2” F
1 l/min
30 l/min
60 bar
+/- 0,3%
SAE 240
640 g
37701
oils, lubricants
and similar
1/2” F
1/2” F
0,5 l/min
15 l/min
60 bar
+/- 0,5%
SAE 240
1000 g
33701
oils, lubricants
and similar
3/4”-1” F
3/4”-1” F
6 l/min
60 l/min
70 bar
+/- 0,5%
SAE 240
1600 g
33703 33705
oils and similar,
diesel oil
1.1/2” F
1.1/2” F
15 l/min
150 l/min
20 bar
+/- 0,5%
SAE 130
3200 g
( * ) ( * )
Art. 33703
( * ) ( * )
Art. 33705
( * ) (
* )
Not type-approved for public use
Articles not manufactured by us( * )
( * )
Art. 33703
Digital litre-counter (weight 3,2 Kg) for diesel oil, oil andantifreeze liquid, ideal for high capacity transfer pumps,
equipped with:- connection F/F 1.1/2”- standard penlight battery powered
Art. 33701
Digital litre-counter (weight 1,6 Kg) for oil and antifreezeliquid, ideal for high capacity transfer pumps, equipped with:- connection F/F 3/4” - 1”
- standard penlight battery powered
Art.33705
Digital litre-counter (weight 1,6 Kg) for diesel oil, ideal forhigh capacity transfer pumps, equipped with:- connection F/F 1”- standard penlight battery powered
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 206/419
VOLUMETRIC GUNS206206
Art. 37720
( * ) ( * )
Art. 37703
Compatible fluids
Inlet
Min. delivery
Max. delivery
Max. pressure
Tolerance
Max. viscosity
Fluid temperature
oils, lubricants
and allied products
1/2” F
1 l/min
20 l/min
70 bar
+/- 0,5%
SAE 240
max 50° C
oils, lubricants
and allied products
1/2” F
1 l/min
15 l/min
70 bar
+/- 0,5%
SAE 240
max 50° C
37720 Article 37703
Not type-approved for public use
Articles not manufactured by us( * )
( * )
( * ) Art. 37703
Gun with mechanical litre-counter for oil (Art. 37701),equipped with:- inlet swivel joint 1/2” F
- flexible terminal- semiautomatic nozzle ø 16
Art. 37720
Digital dispensing gun with preselection for oil.equipped with- inlet swivel joint 1/2” F
- adjustable rigid terminal- automatic closing nozzle ø 14
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 207/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 208/419
208208 OIL GUNS
series 3/8” - T
series 3/8” - L
series 1/2”
series 3/4”
series 3/8” - P
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 209/419
209209GUNS FOR OIL AND SIMILAR
series 3/8” - T
Oil gun series 3/8” - T in technopolymer (see page 210), equipped with:- opening control with s/steel ball- inlet swivel joint 1/2”F- flexible terminal with semiautomatic nozzle ø 16
Delivery
Max. pressure
Inlet union
Seals
Series 3/8” - L 1/2” 3/4”3/8” - T
30 l/min
60 bar
F 1/2”G
Viton
40 l/min
70 bar
F 1/2”G
Viton
65 l/min
100 bar
F 1/2”G
Viton
85 l/min
100 bar
F 3/4”G
Viton
series 3/8” - L
Oil gun series 3/8” - L in aluminium alloy (see page 212), equipped with:- balanced opening valve in brass, for even pressure on the lever in low and high pressure conditions- inlet swivel joint 1/2”F,- flexible terminal with semiautomatic nozzle ø 16- fluid identification coloured caps (supplied for all the range)
series 1/2”
Oil gun series 1/2” in aluminium alloy ( see page 216 ) equipped with:- balanced opening valve in brass, for even pressure on the lever in low and high pressure conditions- inlet swivel joint 1/2”F- lever locking button- flexible terminal with semiautomatic nozzle ø 21- fluid identification coloured caps (supplied for all the range)
series 3/4”
Oil gun series 3/4” high capacity in aluminium alloy ( see page 218 ) equipped with:- balanced opening valve in brass, for even pressure on the lever in low and high pressure conditions- lever locking button- inlet swivel joint 3/4”F,- straight flexible terminal with semiautomatic high delivery nozzle ø 35
series 3/8” - P
Oil gun series 3/8” - P in aluminium alloy ( see page 214 ) equipped like series 3/8” - L but with lever locking button.
3/8” - P
40 l/min
70 bar
F 1/2”G
Viton
Inletfilter
Coloured caps(supplied for series L - P, 3/8” and 1/2”)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 210/419
210210 OIL GUNS Series 3/8” - T
Art. 38023
Grip in technopolymer for oil gun equipped with 1/2”F inlet swivel joint - outlet 3/8”F
Art. 38025 (weight 700 g)
Oil gun equipped with 1/2” F, inlet swivel joint, flexible terminal and semiautomatic drip-catcher nozzle ø 16
Art. 38024Oil gun equipped with 1/2” F, inlet swivel joint, rigid terminal and semiautomatic drip-catcher nozzle ø 16
Art. 33120
Oil gun equipped with 1/2” F inlet swivel joint, high delivery rigid terminal
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 211/419
211211OIL GUNS Series 3/8” - T
Art. 37722 (weight 570 g)
Digital litre-counter (see page 204)
Art. 37711 (weight 640 g)
Digital litre-counter (see page 204)
Art. 37713 (weight 1,4 Kg)
Oil gun equipped with digital litre-counter Art. 37711, 1/2”F,inlet swivel joint, flexible terminal and drip-catcher nozzle ø 16
Art. 37712Oil gun equipped with digital litre-counter Art. 37711, 1/2”F
inlet swivel joint, rigid terminal and drip-catcher nozzle ø 16
Art. 37718
Oil gun equipped with digital litre-counter Art. 37711, 1/2”Finlet swivel joint, high delivery rigid terminal.
Art. 37725 (weight 1,3 Kg)
Oil gun equipped with digital litre-counter Art. 37722, 1/2”F,inlet swivel joint, flexible terminal and drip-catcher nozzle ø 16
Art. 37726Oil gun equipped with digital litre-counter Art. 37722, 1/2”F,inlet swivel joint, rigid terminal and drip-catcher nozzle ø 16
Art. 37727
Oil gun equipped with digital litre-counter Art. 37722, 1/2”Finlet swivel joint, rigid terminal and high delivery rigid terminal
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 212/419
212212 OIL GUNS Series 3/8” - L
Art. 38020
Grip in aluminium for oil gun equipped with 1/2”F - inlet swivel joint and 3/8”F outlet swivel joint
Art. 38022 (weight 700 g)
Oil gun equipped with 1/2”F, inlet swivel joint, flexible terminal and semiautomatic drip-catcher nozzle ø 16
Art. 38021Oil gun equipped with 1/2”F, inlet swivel joint, rigid terminal and semiautomatic drip-catcher nozzle ø 16
Art. 33121
Oil gun equipped with 1/2”F inlet swivel joint, high capacity rigid terminal
supplied for all the range
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 213/419
213213OIL GUNS Series 3/8” - L
Art. 37722 (weight 570 g)
Digital litre-counter (see page 204)
Art. 37711 (weight 640 g)
Digital litre-counter (see page 204)
Art. 37714 (weight 1,4 Kg)
Oil gun equipped with digital litre-counter Art. 37711, 1/2”F,inlet swivel joint, flexible terminal and drip-catcher nozzle ø 16
Art. 37715Oil gun equipped with digital litre-counter Art. 37711, 1/2”F,inlet swivel joint, rigid terminal and drip-catcher nozzle ø 16
Art. 37717
Oil gun equipped with digital litre-counter Art. 37711, 1/2”Finlet swivel joint, high delivery rigid terminal
Art. 37735 (weight 1,3 Kg)
Oil gun equipped with digital litre-counter Art. 37722, 1/2”F,inlet swivel joint, flexible terminal and drip-catcher nozzle ø 16
Art. 37736Oil gun equipped with digital litre-counter Art. 37722, 1/2”F,inlet swivel joint, rigid terminal and drip-catcher nozzle ø 16
Art. 37737
Oil gun equipped with digital litre-counter Art. 37722, 1/2”Finlet swivel joint, and high capacity rigid terminal
Supplied for all the range
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 214/419
214214 OIL GUNS Series 3/8” - P
Art. 37740
Grip in aluminium alloy for oil gun equipped with 1/2”F inlet swivel joint, 3/8”F outlet - lever locking button
Art. 37741 (weight 700 g)
Oil gun equipped with 1/2”F inlet swivel joint, flexible terminal, semiautomatic drip-catcher nozzle ø 16 and lever locking button
Art. 37742Oil gun equipped with 1/2”F inlet swivel joint, rigid terminal, semiautomatic drip-catcher nozzle ø 16 and lever locking button
Art. 37743
Oil gun equipped with 1/2”F inlet swivel joint, high capacity rigid terminal and lever locking button
Supplied for all the range
lever lockingbutton
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 215/419
215215OIL GUNS Series 3/8” - P
Art. 37722 (weight 570 g)
Digital litre-counter (see page 204)
Art. 37711 (weight 640 g)
Digital litre-counter (see page 204)
Art. 37744 (weight 1,4 Kg)
Oil gun equipped with digital litre-counter Art. 37711, 1/2”F
inlet swivel joint, flexible terminal and drip-catcher nozzle ø 16
Art. 37745Oil gun equipped with digital litre-counter Art. 37711, 1/2”Finlet swivel joint, rigid terminal and drip-catcher nozzle ø 16
Art. 37746
Oil gun equipped with digital litre-counter Art. 37711, 1/2”Finlet swivel joint, high capacity rigid terminal
Art. 37747 (weight 1,3 Kg)
Oil gun equipped with digital litre-counter Art. 37722, 1/2”Finlet swivel joint, flexible terminal and drip-catcher nozzle ø 16
Art. 37748Oil gun equipped with digital litre-counter Art. 37722, 1/2”F
inlet swivel joint, rigid terminal and drip-catcher nozzle ø 16
Art. 37749
Oil gun equipped with digital litre-counter Art. 37722, 1/2”Finlet swivel joint, high capacity rigid terminal
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 216/419
216216 OIL GUNS Series 1/2”
Art. 37750
Grip in aluminium for oil gun equipped with 1/2”F inlet swivel joint - 1/2”F outlet - lever locking button
Art. 37751 (weight 1,35 Kg)
Oil gun equipped with 1/2”F inlet swivel joint, flexible terminal and semiautomatic drip-catcher nozzle ø 21 - lever locking button
Art. 37752Oil gun equipped with 1/2”F inlet swivel joint, rigid terminal and semiautomatic drip-catcher nozzle ø 21 - lever locking button
Art. 33140
High capacity oil gun equipped with 1/2”F inlet swivel joint, rigid terminal - lever locking button
Supplied for all the range
lever lockingbutton
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 217/419
217217OIL GUNS Series 1/2”
Art. 37722 (weight 570 g)
Digital litre-counter (see page 204)
Art. 37711 (weight 640 g)
Digital litre-counter (see page 204)
Art. 37765 (weight 2 Kg)
Oil gun equipped with digital litre-counter Art. 37711, 1/2”Finlet swivel joint, flexible terminal and drip-catcher nozzle ø 21
Art. 37766Oil gun equipped with digital litre-counter Art. 37711, 1/2”Finlet swivel joint, rigid terminal and drip-catcher nozzle ø 21
Art. 37767
Oil gun equipped with digital litre-counter Art. 37711, 1/2”Finlet swivel joint and high capacity terminal
Art. 37771 (weight 1,9 Kg)
Oil gun equipped with digital litre-counter Art. 37722, 1/2”Finlet swivel joint, flexible terminal and drip-catcher nozzle ø 21
Art. 37772Oil gun equipped with digital litre-counter Art. 37722, 1/2”F
inlet swivel joint, rigid terminal and drip-catcher nozzle ø 21
Art. 37773
Oil gun equipped with digital litre-counter Art. 37722, 1/2”Finlet swivel joint and high capacity terminal
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 218/419
218218 DELIVERY GUNS
Art. 33153
Art. 33151
Art. 33152
Art. 33150
lever lockingbutton
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 219/419
219219Series 3/4”
Art. 33150
High delivery oil gun grip, equipped with:- 3/4” F inlet swivel joint - 3/4” F outlet- lever locking buttonIdeal for high deliveries in transferring oil,lubricants and allied products
Art. 33151
High delivery oil gun grip, equipped with:- 3/4” F inlet swivel joint- lever locking button- flexible terminal and drip-catcher nozzle ø 35Ideal for high deliveries in transferring oil,lubricants and allied products
Art. 33152
High delivery oil gun grip, equipped with:- 3/4” F inlet swivel joint- lever locking button- rigid terminal and drip-catcher nozzle ø 35Ideal for high deliveries in transferring oil,
lubricants and allied products
Art. 33153
High delivery oil gun grip, equipped with:- 3/4” F inlet swivel joint- lever locking button- rigid terminal with free outletIdeal for high deliveries in transferring oil,lubricants and allied products
Important: Do not use flammable or corrosive liquids.
Delivery
Max. pressure
Inlet union
Outlet union
Seals
Article 33151 33152 331533315090 l/min
100 bar
swivel joint 3/4”F
3/4”F
Viton
80 l/min
100 bar
swivel joint 3/4”F
nozzle ø 35 mm
Viton
80 l/min
100 bar
swivel joint 3/4”F
nozzle ø 35 mm
Viton
90 l/min
100 bar
swivel joint 3/4”F
hose ø 26 mm
Viton
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 220/419
220220 OIL GUNS Series 3/8” - T - L - P
Art. 38020
Art. 37740
Art. 38023
Art. 38011
Art. 38013
Art. 38012
Art. 38015
Art. 38016
Art. 38018
Art. 38062
Art. 38017
Art. 38010
Art. 38016
Semiautomatic drip-catcher nozzle ø 16
Art. 38017
Semiautomatic drip-catcher nozzle ø 8
Art. 38018
Semiautomatic drip-catcher nozzle ø 8with curved spout
Art. 38010
Flexible terminal
with semiautomatic drip-catcher nozzle ø 16
Art. 38011
Rigid terminalwith semiautomatic drip-catcher nozzle ø 16
Art. 38013
Rigid terminal 45°
with semiautomatic drip-catcher nozzle ø 16
Art. 38012
High delivery rigid terminal with free outlet ø 20
Art. 38023
Grip in technopolymer
with inlet swivel joint 1/2” F
Art. 38020
Grip in aluminium alloy
with inlet swivel joint 1/2” F
Art. 38015
Semiautomatic drip-catcher nozzle ø 10
Art. 38062
Swivel joint for oil gun, 1/2” M/F
Art. 37740
Grip in aluminium alloywith 1/2” F inlet swivel joint and lever locking button
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 221/419
221221OIL GUNS Series 1/2”
Art. 37750
Art. 38030
Art. 38031
Art. 38032
Art. 38034
Art. 38035
Art. 38063
Art. 38029
Art. 38035Semiautomatic drip-catcher nozzle ø 27
Art. 38029
Flexible terminalSemiautomatic drip-catcher nozzle ø 21
Art. 38030
Rigid terminalwith semiautomatic drip-catcher nozzle ø 21
Art. 38031
Rigid terminal 45°with semiautomatic drip-catcher nozzle ø 21
Art. 38032High delivery rigid terminal
free outlet ø 20
Art. 37750
Grip in aluminium alloywith inlet swivel joint 1/2” F and lever locking button
Art. 38034
Semiautomatic drip-catcher nozzle ø 21
Art. 38063
Swivel jointfor oil gun, inlet 1/2” M/F
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 222/419
222222 GUNS Series 3/4”
Art. 33150 Art. 38065
Art. 38040
Art. 38038
Art. 38037
Art. 38039
Art. 38038
High delivery rigid terminal 45°
with semiautomatic drip-catcher nozzle ø 35
Art. 38039
High delivery rigid terminalwith free outlet ø 26
Art. 33150
Grip in aluminium alloywith inlet swivel joint 3/4” F
Art. 38065
Swivel jointfor oil gun, high delivery, inlet 3/4” M/F
Art. 38037
High delivery flexible terminalwith semiautomatic drip-catcher nozzle ø 35
Art. 38040
High delivery semiautomatic drip-catcher nozzle ø 35
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 223/419
Art. 33122
High delivery oil gun for transfer, equipped with:- 3/4”F inlet swivel joint (max 8 bar)- rigid terminal with free outletIdeal for high deliveries in transferring oil, wasteoil and antifreeze liquid.
Note: It is advisable to use it with hose 3/4”
(Art. 997.505) and with pumps R 1:1 (max 8 bar)
Art. 33123
Ball cock, equipped with:- 3/4”F inlet connection- rigid terminal with free outletIdeal for high deliveries in transferring oil,waste oil and antifreeze liquid.
Note: It is advisable to use it with hose 3/4”
(Art. 997.505) and with pumps R 1:1
Important: Do not use flammable or corrosive liquids.
Art. 33440
Gun for antifreeze, windshield washing liquid and water
- 1/2”F inlet swivel joint- rigid terminal with free outlet
223223DELIVERY GUNS
Art. 33123
Art. 33122
Art. 33440
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 224/419
Art. 38042
Bung adaptor ø 42 mm, with double bodyfor pumps with suction tube, series 600 and 650
Art.38043
Wall bracket ø 42 mmwith clamping system with double bodyfor wall-mounting of pumps, series 600 and 650
Art. 33115
Wall bracket in steelfor wall-mounting of transfer pumps,series 600 and 650
Art. 10/15
Bung adaptor ø 53 mmfor industrial pumps with suction tube,series 900 and 1200
Art. 33434
Bung adaptor ø 34 mm, with double bodyfor pumps with suction tube, series 600
Art. 38046
Bung adaptor ø 32 mm, with double bodyfor pumps with suction tube, series 500
Art. 38051
Bung adaptor ø 50 mm,for pumps with suction tube, series 500
Art. 38047
Wall bracket ø 32 mm
with clamping system with double bodyfor wall-mounting of pumps, series 500
Art. 38052
Wall bracket ø 50 mmwith clamping system with screwfor wall-mounting of pumps, series 500
ACCESSORIES224224
Art. 38047
Art. 38043
Art. 33115
Art. 38046 Art. 33434
Art. 38042
Art. 38051 Art. 10/15
Art. 38052
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 225/419
Art. 10/10
Wall bracket in painted steel
for wall-mounting of integral and flangedindustrial pumps, series 900 and 1200
Art. 10/12
Wall bracket in painted steel
for wall-mounting of dissociated industrialpumps, series 900 and 1200
Art. 10/13
Wall bracket in painted steelwith dampers for wall-mounting ofdissociated industrial pumps, series 900and 1200
Art. 10/11
Wall bracket in painted steelwith dampers for wall-mounting ofintegral and flanged industrial pumps,series 900 and 1200
Art. 10/18
Wall bracket in painted steel
with dampers for wall-mounting of
dissociated industrial pumps ø 100 mm,series 900 and 1200
Art. 33590
Wall bracket in painted steelfor wall-mounting of diaphragm pumps 1/2“
Art. 33591
Wall bracket in painted steel
for wall-mounting of diaphragm pumps 1“
ACCESSORIES 225225
Art. 10/11
Art. 10/10
Art. 10/12
Art. 10/13
Art. 10/18
Art. 33590
Art. 33591
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 226/419
Art. 38070
90° union- 1/2” G - M/F
Art. 33127
Male quick connector
- thread 3/4”G - F- high pressure 250 bar
Art. 33126
Female quick connector- thread 3/4”G - F- high pressure 250 bar
Art. 38091
Check valvewith connection for flexible hose 1.1/4”- thread 1”G - M to be fittedon the draining cock of tanks
ACCESSORIES226226
Art. 38071 Nipple 1/2”G x 1/2”G - M/M
Art. 38072 Nipple 1/2”G x 3/8”G - M/M
Art . 38073 Nipple 3/8”G x 3/8”G - M/M
Art. 33116 Nipple 1”G x 1”G - M/M
Art. 33117 Nipple 3/4”G x 3/4”G - M/M Art. 33118 Nipple 1/2”G x 3/4”G - M/M
Art. 33119 Nipple 1”G x 3/4”G - M/M
Art. 33275 Nipple 3/4”G x 1/2”G - F/M
Art. 33276 Nipple 1”G x 3/4”G - F/M
Art. 38075 Nipple M 1/2”G x F 1/2”NPT
Art. 38076 Nipple F 1/2”G x M 1/2”NPT Art. 38077 Nipple F 3/8”G x M 3/8”NPT
Art. 38078 Nipple M 3/8”G x F 3/8”NPT
Art. 33112 Nipple M 3/4”G x F 3/4”NPT
Art. 33113 Nipple M 1/2”G x F 3/4”NPT
Art. 38071
Art. 38072 Art. 38073 Art. 33116
Art. 33117 Art. 33118
Art. 33119 Art. 33275
Art. 33276
Art. 38070
Art. 33127
Art. 38091
Art. 38075 Art. 38076 Art. 38077
Art. 38078 Art. 33112
Art. 33113
Art. 33126
Articles not manufactured by us( * )
( * )
( * )
( * )
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 227/419
Art. 38027
Rigid suction tube ø 42 - 940 mmfoot valve with filterfor combining with wall-mounted pumps
Art. 38055
Rigid suction tube ø 42 - 1260 mmfoot valve with filterfor combining with wall-mounted pumps
Art. 33427
Rigid s/steel suction tube ø 34 - thread 1” M - 940 mmfor combining with wall-mounted s/steel pumps
Art. 33581
Rigid suction tube ø 34 - thread 1” M - 940 mmfor combining with diaphragm pumps
Art. 33582
Rigid suction tube ø 34 - thread 1” M - 1240 mmfor combining with diaphragm pumps
ACCESSORIES 227227
Art. 33427
Art. 38027
Art. 33581
Art. 33582
Art. 38055
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 228/419
Art. 38026
Flexible suction tube ø 1.1/4”- length 2 mfor wall-mounted pumps
Art. 33426
Flexible suction tube ø 3/4”- lenght 2 mfor wall-mounted s/steel pumps
Art. 993.201
Hose - 1/4” M/F - 1 m 20 bar
Art. 993.202
Hose - 1/4” M/F - 2 m 20 bar
Art. 996.301
Hose - 1/2” M/F - 1 m 150 bar
Art. 996.302
Hose - 1/2” F/F - 2 m 150 bar
Art. 996.304
Hose - 1/2” M/F - 4 m 150 bar
Art. 997.505
Hose 3/4” M/F - 5 m 150 bar
Art. 998.501
Hose 1” M/F - 1 m 150 bar
Art. 998.502
Hose 1” M/F - 2 m 150 bar
Art. 38210
Ball cock 1/2”
total passage for system- max. pressure 70 bar
Art. 38211
Ball cock 1”total passage for system- max. pressure 70 bar
Art. 38028Flexible suction tube ø 1.1/4”- length 1 mfor wall-mounted pumps
ACCESSORIES228228
Art. 38026
Art. 38028
Art. 33426
Art. 993.201 Art. 993.202
Art. 996.301 Art. 996.302
Art. 996.304 Art. 997.505
Art. 998.501
Art. 998.501
Art. 38210
Art. 38211
( * )
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 229/419
Art. 38097
Flow regulator chamber 3/4” F/F equipped with:- one-way valveeliminates sudden pressure changes, ensuring a regular flow- max pressure 100 bar
Art. 38099
System overpressure control valve
- 1/2” F/F- Calibration 5 - 50 bar
Art. 37812
Pressure regulator with condensate discharge filter, lubricator,pressure gauge and inlet-outlet connections 1/4” F/F
Art. 37817
Pressure regulator with condensate discharge filter, lubricator,pressure gauge and inlet-outlet connections 1/2” F/F
Art. 38095
“Y” filter in line - 1/2” F/F for fitting on the outlet of pumpsfor oil and allied products - max pressure 100 bar
Art. 65160
Drum cover ø 600 mm for drums 180 - 220 Kg- 2” fixing union arranged for pump clamping ring
Art. 65142
Drum cover ø 420 mm for drums 50 - 60 Kg- 2” fixing union arranged for pump clamping ring
Art. 38096
“Y” filter in line - 1” F/F for fitting on the outlet of pumpsfor oil and allied products - max pressure 100 bar
Art. 38100
System overpressure control valve- 3/4” F/F- Calibration 5 - 50 bar
Art. 38098
Flow regulator chamber 3/4” F/F with air tank equipped with:- one-way valveeliminates sudden pressure changes, ensuring a regular flow- max pressure 100 bar
Art. 65138
Drum cover ø 385 mm for drums 30 - 50 Kg- 2” fixing union arranged for pump clamping ring
ACCESSORIES 229229
Art. 38097
Art. 38099
Art. 38100
Articles not manufactured by us( * )
Art. 38095 Art. 38096
Art. 65160 Art. 65142 Art. 65138
Art. 38098
( * )
( * )
Union F 2”
Art. 37812
Art. 37817
( * )
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 230/419
FLUID STORAGE MANAGEMENT230230
Art. 39280
Articles not manufactured by us( * )
Art. 39281
( * )
1
6
4
2
3
5
7
Art. 39281 Art. 39286-39287
Art. 39289
Art. 39280
Art. 39290
Art. 39284-39285
Art. 39282
1
2
3
4
5
6
7
( * ) Art. 39281
Feeder 220/24 V -D.C. - 6 AmperIt supplies power to all accessories (24 V) that can be applied on thefluid management system.
Art. 39280
Timer with daily and weekly programming for programmed activation.Solenoid valve 24 V - D.C.
The use of electropneumatic accessories enables effective and safe management of activation and control of thestorage room, a place from where the distribution - delivery stations inside the workshop are fed through a fixed system.
The are two possibilities of control with low-voltage power supply (24 V - DC):
- activation or simultaneous stopping of all the pumps through the application of a timer for daily/weeklyprogramming. The timer controls a solenoid valve which shuts off the main compressed air feed. The system issupported by a main stop pushbutton in case of emergency.
- activation of each single pump through the application of a solenoid valve at the inlet of the compressed air thatfeeds it. The system is supported by a selector for automatic or manual feed.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 231/419
Art. 39282
Automatic - manual selector 24V - D.C., for feeding solenoid valves
Art. 39289
Luminous acoustic flashing light
Combined with a level indicator to signal when the fluid in the drum ortank is finished
Art. 39290
Electric line main stop pushbutton
Art. 39284
Pneumatic solenoid valve 24 V - D.C., connections FxM 1/4”,complete with pressure reducer 0 - 8 bar
Art. 39285Pneumatic solenoid valve 24 V - D.C., connections FxM 1/2”,complete with pressure reducer 0 - 8 bar
Art. 39286
Pneumatic solenoid valve 24 V - D.C., connections FxF 1/4” with hole
for air discharge
Art. 39287
Pneumatic solenoid valve 24 V - D.C., connections FxF 1/2” with holefor air discharge
Art. 39260
Control unitwith display of liquid level in the tank (see page 149)
Art. 39261
Control unit
with direct connection to PC and display of liquid level in thetank (see page 149)
ELECTROPNEUMATIC ACCESSORIES 231231
Art. 39286
Art. 39287
Art. 39284
Art. 39285
Art. 39290
Art. 39282
Art. 39289
( * )
( * )
( * )
( * )
( * )
Articles not manufactured by us( * )
( * )
Art. 39260 Art. 39261
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 232/419
232232 EXTENSIONS FOR CUSTOMISING PUMPS
Art. 38084
Art. 38085
Art. 38086
Art. 38087
Art. 38088
Art. 38084
Art. 38085
Art. 38086
Art. 38087
Art. 38088
MODULAR EXTENSIONS FOR
WALL-MOUNTED OR DRUM OIL PUMP
8 0 0
1 0 0 5
1 1 0 0
1 3 0 5
1 5 1 0
After establishing the length of the suction tube to beobtained, prepare the required extension using the various modules available
Art. 38084
Top connector 1”Ffor connection between pump and extension
Art. 38085
Extension ø 32 mm - 500 mm
Art. 38087
Extension ø 32 mm - 200mm
Art. 38088
Foot valve complete with union and filter
Art. 38086
Connector for extensionsfor connection between extensions
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 233/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 234/419
EXTENSION 1”234234
Art. 10/24
Art. 10/23
Art. 10/22
Art. 38090
Art. 10/20
Art. 38092
Art. 12/22
Art. 10/23 Art. 10/23
Art. 38092
Art. 38090
Art. 10/20
Art. 10/22
Extension ø 34 - 1”G thread - M/M - 660 mm- suitable for modular and extendable pumps with 1”F connection
Art. 10/23
Extension ø 34 - 1”G thread - M/M - 960 mm- suitable for modular and extendable pumps with 1”F connection
Art. 10/24
Extension ø 34 - 1”G thread - M/M - 1260 mm
- suitable for modular and extendable pumps with 1”F connection
Art. 38092
Top connector - 1” thread F/Fallows to connect pump 1” M thread with extension 1” M thread.
Art. 38090
Foot valve with air eliminator - 1” F threadsuitable to fit ø 34 extension 1”G - M thread
Art. 10/20
Foot valve with filter - 1” F threadsuitable to fit ø 34 extension 1”G - M thread
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 235/419
235235EXTENDABLE PUMPS SUCTION TUBE 1”
Application of pump with customised suction tube
foot valve Art. 10/20
customised suction tube
To obtain a pump with customised suction tube:
1. obtain a water pipe (normally available on the market) 3. thread the 2 ends with 1” GAS Male ø 1” and thickness 2,5mm
2. cutting the length suitable for the container 4. screw the threaded pipe between the pump and the footvalve (Art. 10/20)
Note: apply a sealant to prevent air infiltration in the pumping phase or oil leaks during stops
Threading of customised suction tube
Length of customised suction tube
Art. 35161 - 36061
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 236/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 237/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 238/419
238238 GREASE PUMPS Series 600
62041
Compression ratio
Air inlet connection
Grease outlet connection
Air working pressure
Air max. pressure
Average air consumption
Relative flowrate (free outlet at 6 bar)
Noise level
Suitable for drums
Suction tube length
Suction tube diameter
50:1
F1/4” G
F3/8” G
6-8 bar
8 bar
330 l/min
1500 g/min
81 dB
16 - 20 Kg
410 mm
30 mm
50:1
F1/4” G
F3/8” G
6-8 bar
8 bar
330 l/min
1500 g/min
81 dB
20 - 30 Kg
480 mm
30 mm
50:1
F1/4” G
F3/8” G
6-8 bar
8 bar
330 l/min
1500 g/min
81 dB
50 - 60 Kg
740 mm
30 mm
50:1
F1/4” G
F3/8” G
6-8 bar
8 bar
330 l/min
1500 g/min
81 dB
180 - 220 Kg
940 mm
30 mm
Article
Series 600 air-operated pumpsfor short/long distance greasedistribution, for high pressure
greasing. Ideal for dispensingmedium/high-viscosity grease.Suitable for mobile installationsand centralised fixed systems.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
62048 62074 62095
The suction tube is made with a combination of special steels, heattreated, without the use of seals in order to eliminate any problem of wear.
Polyurethane SealsRatio 50:1 Capacity 1500 g/min
0
190(2755)
285(4133)
bar(psi)
112 225 337 450
0,57
0,74
0
(m3 /min)
380(0,8)
750(1,6)
1140(2,5)
1500(3,3)
g/min(lbs/m)
0,41
380(5510) A
B
C
A
B
C
F L U I D
O U T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: grease NLGI 1 - 20 °C
No. 1 packing m 3 0,010
kg 4,8
No. 1 packing m 3 0,020
kg 6,1
No. 1 packing m 3 0,020
kg 6,7
No. 1 packing m 3 0,010
kg 4,6
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 239/419
239239GREASE PUMPS Series 700
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
63074
Compression ratio
Air inlet connection
Grease outlet connection
Air grease working pressure
Air max. pressure
Average air consumption
Relative flowrate (free outlet at 6 bar)
Noise level
Suitable for drums
Suction tube length
Suction tube diameter
65:1
F1/4” G
F3/8” G
6-8 bar
8 bar
440 l/min
1900 g/min
81 dB
50 - 60 Kg
740 mm
30 mm
65:1
F1/4” G
F3/8” G
6-8 bar
8 bar
440 l/min
1900 g/min
81 dB
180 - 220 Kg
940 mm
30 mm
Article 63095
The pumps are equipped with a filter at the air inlet and a filter at the bottom of the suction tube in the sucked grease passage. They have adouble valve enabling delivery of the grease in a continuous and constant flow. These devices prevent obstructions and consequent interruptionsdue to the passage of impurities.
Series 700 air-operated pumpsfor short/long distance greasedistribution, for high pressure
greasing. Ideal for dispensingmedium/high-viscosity grease.Suitable for centralised fixed systems.Recommended when delivery of agreater quantity of grease with highpressure is required.
63041
65:1
F1/4” G
F3/8” G
6-8 bar
8 bar
440 l/min
1900 g/min
81 dB
16 - 20 Kg
410 mm
30 mm
65:1
F1/4” G
F3/8” G
6-8 bar
8 bar
440 l/min
1900 g/min
81 dB
20 - 30 Kg
480 mm
30 mm
63048
Polyurethane Seals
0
230(3335)
360(5220)
bar(psi)
90 180 270 360
0,9
1,2
0
(m3 /min)
470(1)
950(2)
1420(3)
1900(4)
g/min(lbs/m)
0,7
500(7250) A
B
C
A
B
C
F L U I D
O U T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: grease NLGI 1 - 20 °C
Ratio 65:1 Capacity 1900 g/min
No. 1 packing m 3 0,020
kg 8,2
No. 1 packing m 3 0,020
kg 7,4
No. 1 packing m 3 0,010
kg 6,1
No. 1 packing m 3 0,010
kg 5,9
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 240/419
240240 GREASE PUMPS Series 900
Series 900 industrial air-operatedpumps for short/long distancegrease distribution, for high pressure
greasing.Ideal for transferring grease andhigh-viscosity oil. The double actionguarantees the delivery of a continuousand constant flow, suitable for thenumerous needs of modern industry.The high quality of the materialsused and the anticorrosion treatmentsreduce internal friction and limitwear over time.
A B C
8 bar(116 psi) 6 bar(87 psi) 4 bar(58 psi)
Compatible fluids
Type of seals
Suction tube upper body
Suction tube Air inlet connection
Fluid outlet connection
Suction tube diameter
Suction tube length
Suitable for drums
Relative flowrate (free outlet at 6 bar)
Max. air consumption 8 bar
Noise level
Max. feed pressure
91F/45190F/451
greases,high viscosity oils
polyurethane/PU
carbon steel
carbon steelF 1/2”G
F 1/2”G
ø 45
500 mm
-
4400 g/min
1,6 m3 /min
80 dB
8 bar
greases,high viscosity oils
polyurethane/PU
carbon steel
carbon steelF 1/2”G
F 1/2”G
ø 45
940 mm
180 - 220 Kg
4400 g/min
1,6 m3 /min
80 dB
8 bar
Article
Polyurethane SealsRatio 45:1 Capacity 4400 g/min
0
170(2465)
150(3625)
bar(psi)
50 100 150 200
1,3
1,8
0
(m3 /min)
1100(2,42)
2200(4,84)
3300(7,26)
4400(9,68)
g/min(lbspm)
1,0
330(4785) A
B
C
A
B
C
F L U
I D
O U T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: grease NLGI 1 - 20 °C
No. 1 packing m 3 0,050
kg 17
No. 1 packing m 3 0,070
kg 19
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 241/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 242/419
MOBILE GREASING PLATFORMS242242
Mobile grease dispenserplatform. The ideal combination
for dispensing grease in anyworkplace. The very easy to handletrolley is equipped with a drum(180 - 220 kg) clamping device,adjustable side support for hookingaccessories, and wheel with brake.The platform comes with a handyhose reel with 12 m of hose.By request the platform can beequipped with other hose reels,see page 370.
Art. 64000 (R 50:1 - 1500 g/min)
Art. 64000/65 (R 65:1 - 1900 g/min)
Art. 64000/75 (R 75:1 - 4400 g/min)
Art. 62095
(for Art. 64000)
Art. 116F/751
(for Art. 64000/75)
Art. 993.502
Art. 66590
(for Art. 64000)
Art. 80201
Art. 65600(for Art. 64000)
Art. 66889
For drums 180 - 220 kg
with hose reel
OVERALL DIMENSIONS
Art. 63095
(for Art. 64000/65)
Art. 66892
600
850
1 3 3 0
920
Art. 8430.501
Art. 10/50
(for Art. 64000/75)
Art. 10/60
(for Art. 64000/75)
ø from 550 to 600mm
Art. 64000Mobile grease dispenser platform with hose reel,for drums of 180 - 220 kg, comprising: Art. 62095 pump R 50:1 - 1500 g/min
- Art. 80201 trolley - Art. 993.502 tubo 1/4” - 1,5 m- Art. 8430.501 hose reel 1/4” - 12 m- Art. 66889 gun with triple swivel joint - Art. 66892 nipple- Art. 65600 drum cover ø 60 - Art. 66590 follower plate ø 585
Art. 64000/65Platform like Art. 64000, but with: Art. 63095 pump R 65:1 - 1900 g/min
Art. 64000/75Platform like Art. 64000, but with: Art. 116F/751 pump R 75:1 - 4400 g/min
- Art. 66893 nipple 1/2” x 1/4” G M/M- Art. 10/50 drum cover ø 600 mm- Art. 10/60 follower plate ø 585 mm
No. 4 packing m 3 0,234 kg 85,2
No. 4 packing m 3 0,234 kg 86,7
No. 4 packing m 3 0,285 kg 101
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 243/419
GREASING KIT 243243
Art. 64070 (R 50:1 - 1500 g/min)
Art. 64070/65 (R 65:1 - 1900 g/min)
Art. 64070/75 (R 75:1 - 4400 g/min)
Mobile grease dispenserplatform. The ideal combinationfor dispensing grease in any
workplace.The very easy to handletrolley is equipped with a drum(180 - 220 kg) clamping device,and an adjustable side support forhooking accessories.
700
8 3 0
770
for drums 180 - 220 kg
OVERALL DIMENSIONS
Art. 62095
(for Art. 64070)
Art. 116F/751
(for Art. 64070/75)
Art. 993.504
Art. 66590(for Art. 64000)
Art. 10/60
(for Art. 64000/75) Art. 80200
Art. 66888
Art. 63095
(for Art. 64070/65)
Art. 66892
Art. 65600
(for Art. 64000)
Art. 10/50
(for Art. 64000/75)
Art. 64070/65Platform like Art 64070 but with: Art. 63095 pump R 65:1 - 1900 g/min
Art. 64070/75Platform like Art 64070 but with: Art. 116F/751 pump R 75:1 - 4400 g/min
- Art. 66893 nipple 1/2” x 1/4” G M/M- Art. 10/50 drum cover ø 600 mm- Art. 10/60 follower plate ø 585 mm
Art. 64070Mobile grease dispenser platform for drums of 180 - 220 kg,comprising: Art. 62095 pump R 50:1 - 1500 g/min
- Art. 80200 trolley - Art. 66892 nipple- Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun- Art. 65600 drum cover ø 600 mm- Art. 66590 follower plate ø 585 mm
No. 3 packing m 3 0,120 kg 64,2
No. 3 packing m 3 0,120 kg 65,7
No. 3 packing m 3 0,170 kg 79,7
ø from 550 to 600mm
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 244/419
GREASING KIT244244
Trolley-mounted greasedispenser kit. The idealcombination for dispensing grease
in any workplace.The compact trolley (Art. 80050)has 2 fixed wheels and 2 castorsthat make it very easy to handle.It is equipped with a pump supportand is suitable for small-medium-size containers.
Art. 64064 (R 50:1 - 1500 g/min)
Art. 64064/65 (R 65:1 - 1900 g/min)
Art. 64063 (R 50:1 - 1500 g/min)
for drums 50 - 60 kg
Art. 64064Trolley-mounted grease dispenser kit, for drums 50 - 60 kg,with external ø 370 - 420 mm, comprising:
Art. 62074 pump R 50:1 - 1500 g/min- Art. 80050 trolley- Art. 66892 nipple 1/4” x 3/8” G M/M- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 65420 drum cover ø 420 mm- Art. 66400 follower plate ø 400 mm
Art. 64063Trolley-mounted grease dispenser kit, for drums 50 - 60 kg,with external ø da 370 - 420 mm, equipped like Art. 64064but without follower plate
No. 3 packing m 3 0,059 kg 22,4
No. 3 packing m 3 0,059 kg 19,5
Art. 64064/65
Trolley-mounted grease dispenser kit, for drums 50 - 60 kg,with external ø 370 - 420 mm, comprising: Art. 63074 pump R 65:1 - 1900 g/min
- Art. 80050 trolley- Art. 66892 nipple 1/4” x 3/8” G M/M- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 65420 drum cover ø 420 mm- Art. 66400 follower plate ø 400 mm
No. 3 packing m 3 0,059 kg 23
Art. 64041Trolley-mounted grease dispenser kit, for drums 50 - 60 kg,with external ø 370 - 420 mm, comprising: Art. 62074 pump R 50:1 - 1500 g/min
- Art. 80035 trolley- Art. 66892 nipple 1/4” x 3/8”G M/M- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 65420 drum cover ø 420 mm- Art. 66400 follower plate ø 400 mm
Art. 64041/65
Trolley-mounted grease dispenser kit, for drums 50 - 60 kg,with external ø 370 - 420 mm, comprising: Art. 63074 pump R 65:1 - 1900 g/min
- Art. 80035 trolley- Art. 66892 nipple 1/4” x 3/8”G M/M- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 65420 drum cover ø 420 mm- Art. 66400 follower plate ø 400 mm
No. 3 packing m 3 0,048 kg 22,5
No. 3 packing m 3 0,048 kg 21
Art. 64040Trolley-mounted grease dispenser kit, for drums 50 - 60 kg,with external ø da 370 - 420 mm, equipped like Art. 64041but without follower plate
No. 3 packing m 3 0,048 kg 19
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 245/419
245245
64064
94064/65
64063
6404164041/65
64040
64042
64042/65
1010
1015
1010
10101015
1010
1010
1015
510
510
510
460460
460
470
470
640
640
640
500500
500
500
500
Art. 80040
(for Art. 64042 Art. 64042/65)
Art. 62074
(for Art. 64064 - Art. 64063 Art. 64041 - Art. 64040 Art. 64042)
Art. 66892
Art. 993.504
Art. 65420
Art. 66400
OVERALL DIMENSIONS
Art. 64042 (R 50:1 - 1500 g/min)
Art. 64042/65 (R 65:1 - 1900 g/min)
Art. 64041 (R 50:1 - 1500 g/min)
Art. 64041/65 (R 65:1 - 1900 g/min)
Art. 64040 (R 50:1 - 1500 g/min)
Art. 80050
(for Art. 64064 Art. 64064/65 Art. 64063)
Art. 80035
(for Art. 64041 Art. 64041/65 Art. 64040)
Art. 63074
(for Art. 64064/65 Art. 64041/65 Art. 64042/65)
B C
A
Art. A B C
Art. 66888
Art. 64042Trolley-mounted grease dispenser kit , for drums 50 - 60 kg,(for Art. 64064 with external ø 370 - 420 mm, comprising: Art. 62074 pump R 50:1 - 1500 g/min
- Art. 80040 trolley- Art. 66892 nipple 1/4” x 3/8”G M/M- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 65420 drum cover ø 420 mm- Art. 66400 follower plate ø 400 mm
No. 3 packing m 3 0,048 kg 22
Art. 64042/65
Trolley-mounted grease dispenser kit, for drums 50 - 60 kgwith external ø 370 - 420 mm, equipped like Art. 64042 but with Art. 63074 pump R 65:1 - 1900 g/min
No. 3 packing m 3 0,048 kg 23,5
ø from 370 to 420mm
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 246/419
GREASING KIT246246
Art. 66892
Art. 66888
Art. 65385
Art. 66370
for drums 50 - 60 kg
Art. 64038 (R 50:1 - 1500 g/min)
Art. 64038 /65 (R 65:1 - 1900 g/min)
Art. 64037 (R 50:1 - 1500 g/min)
Art. 80035
Art. 62074
(for Art. 64038 Art. 64037)
Art. 63074
(for Art. 64038/65)
Trolley-mounted grease dispenserkit. The ideal combination fordispensing grease in any workplace.
The entirely galvanised trolleys arealso suitable for carrying 20 - 60 kgcontainers. Their compact sizemakes them very easy to handleand their modularity enablescompact packing for easy transportand storage.
Art. 993.504
Art. 64037
Trolley-mounted grease dispenser kit, for drums 50 - 60 kg,with ext. ø 340 - 385 mm, equipped like Art. 64038 butwithout follower plate
Art. 64038Trolley-mounted grease dispenser kit, for drums 50 - 60 kg,with external ø 340 - 385 mm, comprising: Art. 62074 pump R 50:1 - 1500 g/min
- Art. 80035 trolley- Art. 66892 nipple 1/4” x 3/8”G M/M- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 65385 drum cover ø 385 mm- Art. 66370 follower plate ø 370 mm
No. 3 packing m 3 0,048 kg 18
No. 3 packing m 3 0,048 kg 20
Art. 64038/65
Trolley-mounted grease dispenser kit, for drums 50 - 60 kg,with external ø 340 - 385 mm, comprising: Art. 63074 pump R 65:1 - 1900 g/min
- Art. 80035 trolley- Art. 66892 nipple 1/4” x 3/8”G M/M- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 65385 drum cover ø 385 mm- Art. 66370 follower plate ø 370 mm
No. 3 packing m 3 0,048 kg 21,5
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 247/419
247247
OVERALL DIMENSIONS
Art.
64038
64038/6564037
64039
64039/65
A B C
Art. 66892
Art. 66888
Art. 65385
Art. 66370 Art. 80040
Art. 62074
(for Art. 64039)
Art. 63074
(for Art. 64039/65)
Art. 993.504
Art. 64039 (R 50:1 - 1500 g/min)
Art. 64039/65 (R 65:1 - 1900 g/min)
The follower plate prevents the formation of air pockets and protects the grease while preserving its characteristics. It allows total suction of the drum contents, preventingdeposits on the walls and on the bottom.
1010
10151010
1010
1015
460
460460
470
470
500
500500
500
500B
A
C
without follower plate with follower plate
Art. 64039Trolley-mounted grease dispenser kit , for drums 50 - 60 kg,with external ø 340 - 385 mm, comprising: Art. 62074 pump R 50:1 - 1500 g/min
- Art. 80040 trolley- Art. 66892 nipple 1/4” x 3/8”G M/M- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 65385 drum cover ø 385 mm- Art. 66370 follower plate ø 370 mm
Art. 64039/65
Trolley-mounted grease dispenser kit, for drums 50 - 60 kg,with ext. ø 340 - 385 mm, equipped like Art. 64039 but with: Art. 63074 pump R 65:1 - 1900 g/min
No. 3 packing m 3 0,048 kg 22,5
No. 3 packing m 3 0,048 kg 21
ø from 340 to 385mm
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 248/419
GREASING KIT248248
Note: for overall dimensions see page 250
Art. 66340
Art. 80035(for Art. 64035
Art. 64034)
Art. 65350
Art. 66888
Art. 62048
Art. 66892
Art. 993.504
Trolley-mounted greasedispenser kit. The idealcombination for dispensing grease
in any workplace. The entirelygalvanised trolleys are also suitablefor carrying 20 - 60 kg containers.Their compact size makes themvery easy to handle and theirmodularity enables compactpacking for easy transportand storage.
for drums 20 - 30 kg
Art. 64034 (R 50:1 - 1500 g/min)
Art. 64035 (R 50:1 - 1500 g/min)
Art. 64036 (R 50:1 - 1500 g/min)
Art. 80040
(for Art. 64036)
Art. 64035Trolley-mounted grease dispenser kit, for drums 20 - 30 kg,with external ø 300 - 350 mm, comprising: Art. 62048 pump R 50:1 - 1500 g/min
- Art. 80035 trolley- Art. 66892 nipple 1/4” x 3/8”G M/M- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 65350 drum cover ø 350 mm- Art. 66340 follower plate ø 340 mm
Art. 64034
Trolley-mounted grease dispenser kit, for drums 20 - 30 kg,with external ø 300 - 350 mm, equipped like Art. 64035 butwithout follower plate.
No. 3 packing m 3 0,040 kg 15,9
No. 3 packing m 3 0,040 kg 17,5
Art. 64036
Trolley-mounted grease dispenser kit, for drums 20 - 30 kg,with ext. ø 300 - 350 mm, comprising: Art. 62048 pump R 50:1 - 1500 g/min
- Art. 80040 trolley- Art. 66892 nipple 1/4” x 3/8”G M/M- Art. 993.504 hose 1/4” - 4 m
- Art. 66888 gun with single swivel joint- Art. 65350 drum cover ø 350 mm- Art. 66340 follower plate ø 340 mm
No. 3 packing m 3 0,040 kg 18,5
ø from 300 to 350mm
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 249/419
GREASING KIT 249249
Note: for overall dimensions see page 250
for drums 20 - 30 kg
Trolley-mounted grease dispenserkit. The ideal combination fordispensing grease in any
workplace. The entirely galvanisedtrolleys are also suitable for carrying20 - 60 kg containers. Theircompact size makes them veryeasy to handle and their modularityenables compact packing for easytransport and storage.
Art. 64032 (R 50:1 - 1500 g/min)
Art. 64033 (R 50:1 - 1500 g/min)
Art. 64033/40 (R 50:1 - 1500 g/min)
Art. 65310
Art. 62048
Art. 66892
Art. 993.504
Art. 66310
Art. 80035(for Art. 64033
Art. 64032)
Art. 66888 Art. 80040
(for Art. 64033/40)
ø from 260 to 300mm
Art. 64033Trolley-mounted grease dispenser kit, for drums 20 - 30 kg,with external ø 260 - 300 mm, comprising: Art. 62048 pump R 50:1 - 1500 g/min
- Art. 80035 trolley- Art. 66892 nipple 1/4” x 3/8”G M/M- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 65310 drum cover ø 310 mm- Art. 66310 follower plate ø 310 mm
Art. 64032
Trolley-mounted grease dispenser kit, for drums 20 - 30 kg,with external ø 260 - 300 mm, equipped like Art. 64033 butwithout follower plate.
No. 3 packing m 3 0,040 kg 15
No. 3 packing m 3 0,040 kg 17
Art. 64033/40
Trolley-mounted grease dispenser kit, for drums 20 - 30 kg,with ext. ø 260 - 300 mm, comprising: Art. 62048 pump R 50:1 - 1500 g/min
- Art. 80040 trolley- Art. 66892 nipple 1/4” x 3/8”G M/M- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 65310 drum cover ø 310 mm- Art. 66310 follower plate ø 310 mm
No. 3 packing m 3 0,040 kg 18
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 250/419
GREASING KIT250250
OVERALL DIMENSIONS
Art. 64024 (R 50:1 - 1500 g/min)
for drums 20 - 30 kg
Art. 65280
Art. 62041
Art. 66892
Art. 993.504
Art. 64025 (R 50:1 - 1500 g/min)
Art. 64024 - Art. 64025 Art. 64020 - Art. 64030 Art. 64021 - Art. 64031
Trolley-mounted grease dispenserkit. The ideal combination fordispensing grease in any workplace.
The entirely galvanised trolleys arealso suitable for carrying 20 - 60 kgcontainers.Their compact sizemakes them very easy to handleand their modularity enablescompact packing for easy transportand storage.
Art. 66265
Art. 80035(for Art. 64024)
Art. 66888 Art. 80040
(for Art. 64025)
460
1 0 0 0
8 4 0
680
500
280
8 1 0
310
8 8 0
ø from 240 to 280mm
Art. 64024Trolley-mounted grease dispenser kit, for drums 20 - 30 kg,with external ø 240 - 280 mm, comprising: Art. 62041 pump R 50:1 - 1500 g/min
- Art. 80035 trolley- Art. 66892 nipple 1/4” x 3/8”G M/M- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 65280 drum cover ø 280 mm- Art. 66265 follower plate ø 265 mm
No. 3 packing m 3 0,040 kg 16
Art. 64025
Trolley-mounted grease dispenser kit , for drums 20 - 30 kg,with external ø 240 - 280 mm, equipped like Art. 64024 but withtrolley Art. 80040
No. 3 packing m 3 0,040 kg 17
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 251/419
PORTABLE GREASING KIT 251251
Trolley-mounted greasedispenser kit. The idealcombination for dispensing grease
in any workplace. Compact in size,they enable easy changing of thecontainer (drum or bucket) andquick greasing of any motor vehicleor mechanism. They are equippedwith a grease follower plate thatprotects the lubricant whilepreserving its characteristics.
for drums 20 - 30 kg
Art. 66599
Art. 62041
(for Art. 64020 Art. 64021)
Art. 62048
(for Art. 64030 Art. 64031)
Art. 66892
Art. 993.504
Art. 65280
(for Art. 64020 Art. 64021)
Art. 65310
(for Art. 64030 Art. 64031)
Art. 66265
(for Art. 64021)
Art. 66310
(for Art. 64031) Art.66888
Art. 64021 (R 50:1 - 1500 g/min)
Art. 64020 ( R 50:1 - 1500 g/min)
Art. 64031 (R 50:1 - 1500 g/min)
Art. 64030 (R 50:1 - 1500 g/min)
No. 2 packing m 3 0,025 kg 9,1
Art. 64031Trolley-mounted grease dispenser kit, for drums 20 - 30 kg,with external ø 260 - 300 mm, comprising: Art. 62048 pump R 50:1 - 1500 g/min
- Art. 66892 nipple 1/4” x 3/8”G M/M- Art. 993.504 hose 1/4” 4 m - Art. 66599 kit carrying handle- Art. 66888 gun with single swivel joint- Art. 65310 drum cover ø 310 mm- Art. 66310 follower plate ø 310 mm
Art. 64021
Trolley-mounted grease dispenser kit for drums 20 - 30 kg,with ext. ø 240 - 280 mm, comprising:
Art. 62041 pump R 50:1 - 1500 g/min- Art. 66892 nipple 1/4” x 3/8”G M/M- Art. 993.504 hose 1/4” 4 m - Art. 66599kit carrying handle- Art. 66888 gun with single swivel joint- Art. 65280 drum cover ø 280 mm- Art. 66265 follower plate ø 265 mm
No. 2 packing m 3 0,030 kg 9,9
No. 2 packing m 3 0,030 kg 12
No. 2 packing m 3 0,025 kg 11,4
Art. 64030
Trolley-mounted grease dispenser for drums 20 - 30 kg,
equipped like 64031 but ma without follower plate
Art. 64020
Trolley-mounted grease dispenser kit, for drums 20 - 30 kg,equipped like Art. 64021 but without follower plate
ø from 240 to 280mm
ø from 260 to 300mm
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 252/419
WALL-MOUNTED GREASE DISPENSING KIT252252
Grease dispensing systems withpump applied on drum,
equipped with series 420swivelling open hose reel. A complete solution for deliveringgrease from an independentfixed station and with connectionto a centralised systemfor dispensing from storage zones.
Art. 993.502
Art. 66892
Art. 65420
Art. 8420.501 Art. 62074
(for Art. 64150)
Art. 66889
Art. 88630
Art. 66400
OVERALL DIMENSIONS
9 0 0
2 2
0 0
By request the kit can be equipped with other hose reels(see page 378)
Art. 63074
(for Art. 64151)
Art. 64150 (R 50:1 - 1500 g/min)
Art. 64151 (R 65:1 - 1900 g/min)
for drums 50 - 60 kg
with open hose reel
ø from 370 to 420mm
Art. 64150Wall-mounted grease dispenser kit with pump for drums50 - 60 kg, with external ø 370 - 420 mm, comprising: Art. 62074 pump R 50:1 - 1500 g/min
- Art. 8420.501 hose reel 1/4” - 12m- Art. 66892 nipple 1/4” x 3/8” G M/M- Art. 993.502 hose 1/4 ” - 1,5m- Art. 66889 gun with triple swivel joint- Art. 88630 drip-tray- Art. 65420 drum cover ø 420 mm- Art. 66400 follower plate ø 400 mm
No. 4 packing m 3 0,130 kg 37,6
Art. 64151Wall-mounted grease dispenser kit like Art. 64150 but with Art. 63074 pump R 65:1 - 1900 g/min
No. 4 packing m 3 0,130 kg 38,6
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 253/419
WALL-MOUNTED GREASE KIT 253253
OVERALL DIMENSIONS
9 0 0
2 2
0 0
Art. 64155 (R 50:1 - 1500 g/min)
Art. 64156 (R 65:1 - 1900 g/min)
for drums 50 - 60 kg
with enclosed hose reel
Grease dispensing systems withpump applied on drum,
equipped with series 440swivelling enclosed hose reel. A complete solution for deliveringgrease from an independentfixed station and with connectionto a centralised system fordispensing from storage zones.
Art. 993.502
Art. 65420
Art. 8440.501 Art. 62074
(for Art. 64155)
Art. 66889
Art. 88630
Art. 66400
By request the kit can be equipped with other hose reels(see page 382)
Art. 63074
(for Art. 64156) Art. 66892
Art. 64155Wall-mounted grease dispenser kit with pump for drums50 - 60 kg, with external ø 370 - 420 mm, comprising: Art. 62074 pump R 50:1 - 1500 g/min
- Art. 8440.501 hose reel 1/4” - 12m- Art. 66892 nipple 1/4” x 3/8” G M/M- Art. 993.502 hose 1/4 ” - 1,5m- Art. 66889 gun with triple swivel joint- Art. 88630 drip-tray- Art. 65420 drum cover ø 420 mm- Art. 66400 follower plate ø 400 mm
Art. 64156Wall-mounted grease dispenser kit like Art. 64150 but with Art. 63074 pump R 65:1 - 1900 g/min
No. 4 packing m 3 0,140 kg 42
No. 4 packing m 3 0,140 kg 43
ø from 370 to 420mm
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 254/419
WALL-MOUNTED GREASE DISPENSING KIT254254
OVERALL DIMENSIONS
9 0 0
2 2 0
0
Grease dispensing systems withpump applied on drum,
equipped with series 420swivelling open hose reel. A complete modular solution fordelivering grease from anindependent fixed station and withconnection to a centralised systemfor dispensing from storage zones.
for drums 180 - 220 kg
with open hose reel
Art. 64200 (R 50:1 - 1500 g/min)
Art. 64201 (R 65:1 - 1900 g/min)
Art. 993.502
Art. 66892
Art. 65600
Art. 8420.501 Art. 62095
(for Art. 64200)
Art. 66889
Art. 88630
Art. 66590
By request the kit can be equipped with other hose reels(see page 378)
Art. 63095
(for Art. 64201)
ø from 550 to 600mm
Art. 64200Wall-mounted grease dispenser kit with pump for drums180 - 220 kg, with ext. ø 550 - 600 mm, comprising: Art. 62095 pump R 50:1 – 1500 g/min
- Art. 8420.501 hose reel 1/4” - 12m- Art. 66892 nipple 1/4” x 3/8” G M/M- Art. 993.502 hose 1/4” - 1,5m- Art. 66889 gun with triple swivel joint- Art. 88630 drip-tray- Art. 65600 drum cover ø 600 mm- Art. 66590 follower plate ø 585 mm
No. 4 packing m 3 0,150 kg 66,8
Art. 64201Wall-mounted grease dispenser kit like Art. 64200 but with Art. 63095 pump R 65:1 - 1900 g/min
No. 4 packing m 3 0,150 kg 67,8
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 255/419
WALL-MOUNTED GREASE DISPENSING KIT 255255
9 0 0
2 2 0 0
OVERALL DIMENSIONS
Grease dispensing systems withpump applied on drum,
equipped with series 440swivelling enclosed hose reel. A complete modular solution fordelivering grease from anindependent fixed station and withconnection to a centralised systemfor dispensing from storage zones.
for drums 180 - 220 kg
with enclosed hose reel
Art. 64210 (R 50:1 - 1500 g/min)
Art. 64211 (R 65:1 - 1900 g/min)
Art. 993.502
Art. 66892
Art. 65600
Art. 8440.501 Art. 62095
(for Art. 64210)
Art. 66889
Art. 88630
Art. 66590
By request the kit can be equipped with other hose reels(see page 382)
Art. 63095
(for Art. 64211)
ø from 550 to 600mm
Art. 64210Wall-mounted grease dispenser kit with pump for drums180 - 220 kg, with ext. ø 550 - 600 mm, comprising: Art. 62095 pump R 50:1 – 1500 g/min
- Art. 8440.501 hose reel 1/4” - 12m- Art. 66892 nipple 1/4” x 3/8” G M/M- Art. 993.502 hose 1/4” - 1,5m- Art. 66889 gun with triple swivel joint- Art. 88630 drip-tray- Art. 65600 drum cover ø 600 mm- Art. 66590 follower plate ø 585 mm
No. 4 packing m 3 0,160 kg 72
Art. 64211Wall-mounted grease dispenser kit like Art. 64210 but with Art. 63095 pump R 65:1 - 1900 g/min
No. 4 packing m 3 0,160 kg 73
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 256/419
GREASE DISPENSING KIT256256
Grease dispensing systems foruse with drum. A completesolution for delivering grease from
an independent fixed station andwith connection to a centralisedsystem for dispensing from storagezones. Complete with accessoriesfor connection to compressed airsystem and for delivery with greaseguns.
Art. 66400
(for Art. 64145)
Art. 62074
(for Art. 64145)
Art. 65420
(for Art. 64145)
for drums 50 - 60 kg
Art. 63074
(for Art. 64146)
Art. 117F/751
(for Art. 64147)
Art. 37801
Art. 66888
Art. 993.202
Art. 993.504
Art. 66892
Art. 64145 (R 50:1 - 1500 g/min)
Art. 64146 (R 65:1 - 1900 g/min)
Art. 64147 (R 75:1 - 4400 g/min)
Art. 10/51
(for Art. 64147)
Art. 10/61
(for Art. 64147)
ø from 370 to 420mm
Art. 64145Grease dispenser kit with pump for drums 50 - 60 kg, withexternal ø 370 - 420 mm, comprising: Art. 62074 pump R 50:1 - 1500 g/min
- Art. 66892 nipple 1/4” x 3/8”G M/M- Art. 993.202 hose 1/4” - 2 m- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 65420 drum cover ø 420 mm- Art. 66400 follower plate ø 400 mm- Art. 37801 pressure regulator with manometer
No. 2 packing m 3 0,040 kg 17
Art. 64146Grease dispenser kit with pump for drums 50 - 60 kg, withext. ø 370 - 420 mm, equipped like Art. 64145 but with:
Art. 63074 pump R 65:1 - 1900 g/min
No. 2 packing m 3 0,040 kg 18
Art. 64147
Grease dispenser kit with pump for drums 50 - 60 kg, withext. ø 370 - 420 mm, comprising: Art. 117F/751 pump R 75:1 - 4400 g/min
- Art. 66893 nipple 1/2” x 1/4”G M/M- Art. 993.202 hose 1/4” - 2 m
- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 10/51 drum cover ø 420 mm- Art. 10/61 follower plate ø 400 mm- Art. 37814 pressure regulator with manometer
No. 2 packing m 3 0,090 kg 32
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 257/419
GREASE DISPENSING KIT 257257
Grease dispensing systems foruse with barrel. A completesolution for delivering grease from
an independent fixed station andwith connection to a centralisedsystem for dispensing from storagezones.Complete with accessories forconnection to compressed airsystem and for delivery with greaseguns.
for drums 180 - 220 kg
Art. 64195 (R 50:1 - 1500 g/min)
Art. 64196 (R 65:1 - 1900 g/min)
Art. 64147 (R 75:1 - 4400 g/min)
Art. 62095
(for Art. 64195)
Art. 63095
(for Art. 64196)
Art. 116F/751
(for Art. 64197)
Art. 66888
Art. 993.202
Art. 993.504
Art. 66892
Art. 66590
(for Art. 64195)
Art. 65600
(for Art. 64195)
Art. 10/50
(for Art. 64197)
Art. 10/60
(for Art. 64197)
Art. 37801
ø from 550 to 600mm
Art. 64195Grease dispenser kit with pump for drums 180 - 220 kg, withext. ø 550 - 600 mm, comprising: Art. 62095 pump R 50:1 - 1500 g/min
- Art. 66892 nipple 1/4” x 3/8”G M/M- Art. 993.202 hose 1/4” - 2 m- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 65600 drum cover ø 600 mm- Art. 66590 follower plate ø 585 mm- Art. 37801 pressure regulator with manometer
No. 2 packing m 3 0,060 kg 23
Art. 64196Grease dispenser kit with pump for drums 180 - 220 kg, withext. ø 550 - 600 mm, equipped like Art. 64195 but with: Art. 63095 pump R 65:1 - 1900 g/min
No. 2 packing m 3 0,060 kg 24
Art. 64197
Grease dispenser kit with pump for drums 180 - 220 kg,with ext. ø 550 - 600 mm, comprising: Art. 116F/751 pump R 75:1 - 4400 g/min
- Art. 66893 nipple 1/2” x 1/4”G M/M- Art. 993.202 hose 1/4” - 2 m
- Art. 993.504 hose 1/4” - 4 m- Art. 66888 gun with single swivel joint- Art. 10/50 drum cover ø 600 mm- Art. 10/60 follower plate ø 585 mm- Art. 37814 pressure regulator with manometer
No. 2 packing m 3 0,110 kg 38
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 258/419
258258 ACCESSORIES FOR GREASE PUMPS
Union ø 30
Union ø 30
FOLLOWER PLATE FOR PUMPS SERIES 600 - 700 WITH SUCTION TUBE Ø 30
FOLLOWER PLATE FOR PUMPS SERIES 900 WITH SUCTION TUBE Ø 45
Art. 66265
Art. 66310
Art. 66340
Art. 66370 Art. 66400
Art. 66590
Art. 10/60
Art. 10/61 Art. 10/62
Union ø 45
FOLLOWER PLATE FOR PUMPS SERIES 600 - 700 WITH SUCTION TUBE Ø 30
Ø Follower plate
Ø Follower plate
Ø Follower plate
Art. 66265
Follower plate ø 265 mm (drums internal ø 240 - 260 mm)
Art. 66310Follower plate ø 310 mm (drums internal ø 255 - 300 mm)
Art. 66340
Follower plate ø 340 mm (drums internal ø 300 - 330 mm)
Art. 10/60
Follower plate ø 585 mm (drums internal ø 540 - 580 mm)
Art. 10/61
Follower plate ø 400 mm (drums internal ø 360 - 400 mm)
Art. 10/62
Follower plate ø 370 mm (drums internal ø 335 - 360 mm)
Art. 66370
Follower plate ø 370 mm (drums internal ø 335 - 360 mm)
Art. 66400
Follower plate ø 400 mm (drums internal ø 360 - 400 mm)
Art. 66590
Follower plate ø 585 mm (drums internal ø 540 - 580 mm)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 259/419
259259 FOLLOWER PLATE USE
Follower plate
The atmospheric pressure at sea-level is 1 bar , equivalent to approx. 1 kg per cm 2. When the pump sucks the grease from thecontainer, a vacuum is created under the follower plate and, at the same time, depending on the width of its surface, a pressure370 kg to 2000 kg is created above it.
Pump
Drum cover
Vacuum created by pump sucking
the grease
The follower plate is always recommended but becomes indispensable when using particularly hard greases. The follower plate is pulled towards the bottom of the drum by the vacuum created by the pump and always ensures the following advantages:
- it compresses the grease, preventing air pockets from forming and possible cavitation of the pump,- it keeps the grease clean, as well as preserving its characteristics,- it enables collection of all the grease from the bottom of the drum, that would otherwise remain stuck to the sides.
It should be pointed out that in this case, the weight created above the follower plate is:for follower plate ø 265 mm, approx. 370 kg;for follower plate ø 310 mm, approx. 500 kg;for follower plate ø 340 mm, approx. 650 kg;
for follower plate ø 370 mm, approx. 750 kg;for follower plate ø 420 mm, approx. 1000 kg;for follower plate ø 585 mm, approx. 1900 kg.
without follower plate with follower plate
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 260/419
260260 ACCESSORIES FOR GREASE PUMPS
DRUM COVER FOR MANUAL PUMPS
WITH SUCTION TUBE Ø 25
Union ø 30 DRUM COVER FOR PUMPS SERIES 600 - 700
WITH SUCTION TUBE Ø 30
DRUM COVER FOR MANUAL PUMPS
WITH SUCTION TUBE Ø 38
DRUM COVER FOR PUMPS SERIES 900 WITH SUCTION TUBE Ø 45
Art. 65280
Art. 65310 Art. 65350
Art. 65385 Art. 65420
Art. 65600
Art. 10/50 Art. 10/51
Art. 10/52
Art. 65309
Art. 65311
Union ø 45
Union
ø 25
Union
ø 38
Art. 65280 Drum cover ø 280 mm(drums external ø 240 - 280 mm)
Art. 65310 Drum cover ø 310 mm(drums external ø 260 - 300 mm)
Art. 65350 Drum cover ø 350 mm
(drums external ø 300 - 350 mm)
Art. 65385 Drum cover ø 385 mm(drums external ø 340 - 385 mm)
Art. 65420 Drum cover ø 420 mm(drums external ø 370 - 420 mm)
Art. 65600 Drum cover ø 600 mm
(drums external ø 550 - 600 mm)
Art. 65309
Drum cover ø 337 mm
(drums external ø 270 - 330 mm)
for Art. 60310 - 61310
Art. 10/50
Drum cover ø 600 mm(drums external ø 550 - 600 mm)
Art. 10/51
Drum cover ø 420 mm(drums external ø 370 - 420 mm)
Art. 10/52
Drum cover ø 385 mm(drums external ø 340 - 385 mm)
Art. 65311
Drum cover ø 337 mm(drums external ø 270 - 330 mm)
for Art. 60410 - 61410
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 261/419
No. 1 packing m 3 1,448 kg 128
Art. 10/82
Twin column industrial pump elevator with bedplate.It is suitable for drums 180 - 220 Kg for industrial pumps.
It allows to lift by air operated system and to let down by gravity the pump by means of side mounted 3-ways control valve (see page 327).
ACCESSORIES FOR GREASE PUMPS 261261
Art. 10/82
For 200 Kg drums with twincolumn pump elevator
For 200 Kg drums with twin column pump elevator and fluid press
For 200 Kg drums, standard applications
For 200 Kg drums with singlecolumn pump elevator
APPLICATIONS
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 262/419
ACCESSORIES FOR GREASE PUMPS262262
Art. 66661
Art. 66891 Nipple 1/4”G x 1/4”G M/M
Art. 66892 Nipple 1/4”G x 3/8”G M/M
Art. 66893 Nipple 1/4”G x 1/2”G M/M
Art. 66891 Art. 66892
Art. 66893
Art. 66895 Nipple M 3/8”G x 1/4”NPT F
Art. 66896 Nipple M 1/4”G x 1/4”NPT F
Art. 66897 Nipple F 1/4”G x 1/4”NPT M
Art. 66895
Art. 66896
Art. 66897
Art. 60451
Art. 60450
Art. 66663
Articles not manufactured by us( * )
( * )
( * )
Art. 66661
Straight single swivel joint 1/4” G M/F
supplied with grease guns Art. 66888 - Art. 66881
Art. 66663
Triple swivel joint - 1/4” G M/Fsupplied with grease guns Art. 66889 - Art. 66882 - Art. 66899
Art. 60450
Female quick connector complete with check valve - 1/4” G Fmax. pressure 350 bar
Art. 60451Male quick connector complete with check valve - 1/4” G Fmax. pressure 350 bar
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 263/419
ACCESSORIES FOR GREASE PUMPS 263263
Art. 66743
Art. 66742
Art. 66741
Art. 66739
Art. 66740
Art. 66599
Art. 993.201 Art. 993.202
Art. 993.502 Art. 993.504
Art. 993.512 Art. 993.518
Art. 995.701 Art. 995.702
Art. 995.710 Art. 995.715
Art. 66741
90° grease coupler
Art. 66742
Hooking grease coupler
Art. 667394-jaw grease coupler with antisplash valve fittedstandard on manual grease pumps
Art. 66740Special 4-jaw grease coupler with antisplash
valve fitted standard on all grease guns
Art. 66743
Push-on grease coupler
Art. 993.201 Hose 1/4” M/F - 1 m - 20 bar
Art. 993.202 Hose 1/4” M/F - 2 m - 20 bar
Art. 993.502 Hose 1/4” F/F - 2 m - 600 bar
Art. 993.504 Hose 1/4” M/F - 4 m - 600 bar
Art. 993.512 Hose 1/4” M/F - 12 m - 600 bar
Art. 993.518 Hose 1/4” M/F - 18 m - 600 bar
Art. 995.701 Hose 3/8” M/F - 1 m - 600 bar
Art. 995.702 Hose 3/8” M/F - 2 m - 600 bar
Art. 995.710 Hose 3/8” M/F - 10 m - 600 bar
Art. 995.715 Hose 3/8” M/F - 15 m - 600 bar
Art. 66599
Handle for portable grease kit
supplied with grease kits Art. 64020 Art. 64021 - Art. 64030 - Art. 64031
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 264/419
ACCESSORIES FOR GREASE PUMPS264264
Art. 37811 Art. 37816
Art. 37810
Art. 37815
Art. 37801 Art. 37814
Art. 37812 Art. 37817
Art. 37801
Pressure regulator with pressure gauge.- connections 1/4” G - M/Fapplied on a pump or on the tank of asuction/drainer, for regulating the compressedair inlet pressure.
Art. 37810
Pressure regulator with condensate
discharge filter and pressure gauge.- connections 1/4 ” G - F/Ffor application at the start of the compressedair line feeding the pump.
Art. 37812
Pressure regulator with condensate dischargefilter, air lubricator and pressure gauge
- connections 1/4” G - F/Fthe system guarantees that the pump feed airis free of condensate
Art. 37811
Air lubricator
- connections 1/4” G - F/Fits application guarantees better efficiency ofthe pump over time.
Art. 37814
Pressure regulator with pressure gauge.
- connections 1/2” G - M/Fapplied on a pump or on the tank of asuction/drainer, for regulating the compressedair inlet pressure.
Art. 37815
Pressure regulator with condensatedischarge filter and pressure gauge.
- connections 1/2 ” G - F/Ffor application at the start of the compressedair line feeding the pump.
Art. 37816
Air lubricator- connections 1/2” G - F/Fits application guarantees better efficiency ofthe pump over time.
Art. 37817
Pressure regulator with condensate discharge
filter, air lubricator and pressure gauge- connections 1/2” G - F/Fthe system guarantees that the pump feed airis free of condensate
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 265/419
GREASE DELIVERY HOSE REEL KIT 265265
Art. 88630 Art. 64510 Art. 64512
Art. 64520 Art. 64522
Complete open and enclosedhose reel kits for delivering
grease.They can be supplied with 1/4” or3/8” hose. Application is by meansof connection to a fixed system ordirectly to the air-operateddispensing pump.
open - enclosedfor greasing
Art. 8440.501
(for Art. 64520)
Art. 8440.506
(for Art. 64522)
Art. 88630
Art. 8420.501
(for Art. 64510)
Art. 8420.506
(for Art. 64512)
Art. 66889
for others hose reel see page 378
for others guns see page 266
No. 3 packing m 3 0,110 kg 30
Art. 64522
Delivery kit with enclosed hose reel, complete with:- Art. 8440.506 hoose reel - 15 m - 3/8” - 600 bar- Art. 66889 grease gun- Art. 88630 modular drip-tray
Art. 64510Delivery kit with open hose reel, complete with:- Art. 8420.501 hose reel - 12 m - 1/4” - 600 bar- Art. 66889 grease gun- Art. 88630 modular drip-tray
Art. 64512
Delivery kit with open hose reel, complete with:- Art. 8420.506 hose reel - 15 m - 3/8” - 600 bar- Art. 66889 grease gun- Art. 88630 modular drip-tray
Art. 64520
Delivery kit with enclosed hose reel, complete with:- Art. 8440.501 hose reel - 12 m - 1/4” - 600 bar- Art. 66889 grease gun- Art. 88630 modular drip-tray
No. 3 packing m 3 0,120 kg 40
No. 3 packing m 3 0,120 kg 35
No. 3 packing m 3 0,110 kg 35
Art. 88630Modular drip-tray. Equipped with hook for gun andremovable drip-tray. Applied under the hose reel, it is ahandy holder for the delivery gun. Essential for a clean andorderly workplace.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 266/419
ACCESSORIES FOR GREASE PUMPS266266
Art. 66855
Art. 66860
Art. 66888
Art. 66889
Art. 66899
Not type-approved for public use
Articles not manufactured by us( * )
( * )
( * ) ( * )
standard equipmenton grease kit
Art. 66860
Grease gun with flexible terminal- inlet 1/4” F
- special 4-jaw grease coupler
Art. 66888
Grease gun withflexible terminal- inlet 1/4” F
- Art. 66661 single swivel joint- special 4-jaw grease coupler
Art. 66889
Grease gun with flexible terminal
- inlet 1/4” F- Art. 66663 triple swivel joint- special 4-jaw grease coupler
Art. 66855
Grease gun valve- inlet 1/4” F
Art. 66899
Grease gun with digital gram-counter
and flexible terminal- inlet 1/4” F- Art. 66663 triple swivel joint- special 4-jaw grease coupler
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 267/419
ACCESSORIES FOR GREASE PUMPS 267267
Art. 66881
Art. 66880
Art. 66882
Art. 66857
Art. 66856
Art. 66880
Grease gun with rigid terminal
- inlet 1/4” F- with special 4-jaw grease coupler
Art. 66881
Grease gun with rigid terminal
- inlet 1/4” F- Art. 66661 single swivel joint- with special 4-jaw grease coupler
Art. 66882
Grease gun with rigid terminal- inlet 1/4” F
- Art. 66663 triple swivel joint- with special 4-jaw grease coupler
Art. 66857
Rigid terminal
with special 4-jaw grease coupler
Art. 66856
Flexible terminalwith special 4-jaw grease coupler
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 268/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 269/419
TROLLEYS AND SERVICE COLUMNS 269269
110page 270
page 272
page 278
page 274
TROLLEYS FOR CONTAINERS 20 - 220 kg
TWO-SIDED SERVICE COLUMNS4 - 6 HOSE REELS
FRONTAL SERVICE COLUMNS1 - 2 HOSE REELS
TWO-SIDED SERVICE COLUMNS4 - 8 HOSE REELS
page 276FRONTAL SERVICE COLUMNS4 - 6 HOSE REELS
page 280FRONTAL SERVICE COLUMNSWITH CONTAINMENT TANKS
page 282CONTAINMENT TANKS
8
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 270/419
MODULAR TROLLEYS270270
Art. 80035
Art. 80040
Art. 80050
for drum 20 - 60 Kg
I052
KC102
KC389
KC203
KC202
KR8001
KR8002
Modular trolley withcompact packing
dimensions
KC174
KC092
KC261
I052
KC066
KR2202
KR8004
KR8003
430
4 8 5
100
300
4 5 5
85
KC089
KC203
KR8001
KR8002
Modular trolley withcompact packing
dimensions
Modular trolley withcompact packing
dimensions
370
4 0 0
110
for drum 20 - 60 Kg
No. 1 packing m 3 0,010 kg 5
Art. 80035Trolley for drums 20 - 60 Kg.
No. 1 packing m 3 0,020 kg 9,2
Art. 80050
Trolley for containers 20 - 60 Kg.
Modular trolleys, entirely galvanised, suitable for handling20 - 60 kg drums. Equipped with 2 very smooth wheels thatmake them extremely easy to handle. Their compact sizeensures perfect integration in the workplace and theirmodularity enables compact packing for easy storage.
Modular trolley, entirely galvanised, suitable for handling20 - 60 kg containers. Equipped with 2 fixed wheels and 2castors, it is very easy to handle. Its modularity enablescompact packing for easy storage.
No. 1 packing m 3 0,010 kg 6
Art. 80040
Trolley for drums 20 - 60 Kg.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 271/419
MODULAR TROLLEYS 271271
Art. 80200
Art. 80201
for drum 180 - 220 Kg
KR4614
KR8005
KR8006
KC175
KC051
KC051
KC056
KC074
KC044
Modular trolley withcompact packing
dimensions
640
8 1 0
100
A417
S003
F096
KC056
KC052
KC053
S009
A417
KC176
KC051
KC051
KC050
KC044
KC055KC054
KR8007
KR8008
Modular trolley withcompact packing
dimensions
A C
B
OVERALL DIMENSIONS
960
1 5 0
660
80035
80040
80050
80200
80201
Article A
460
460
510
770
850
B C
1000
1000
1000
830
950
500 - 680
500 - 680
640
700
920
Art. 80035 - Art. 80040Designed to complete our articles such as oil and grease kits.
Art. 80201
No. 1 packing m 3 0,100 kg 44
Art . 80200
Standard trolley for drums 180 - 220 Kg.
No. 1 packing m 3 0,060 kg 21,9
Art. 80201
Super trolley for drums 180 - 220 Kg. Arranged for application of one of our hose reels
Modular trolleys, entirely galvanised, for 180 - 220 kg drums.Equipped with 2 fixed wheels and 2 castors. and a drumclamping device and adjustable side support for hooking the gunand hose or other accessories. Their modularity offers compactpacking for easy storage.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 272/419
SERVICE COLUMNS272272
Art. 39317
Two-sided service columns, usable from both sides for access. Ideal service stations for rationalising the areasdedicated to delivery. Installable anywhere in the workplace, connected to the centralised distribution system,they are real independent operational stations. Made from top quality materials, with scratchproof painting. Allare fitted with full width drip trays.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 273/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 274/419
SERVICE COLUMNS274274
Art. 39328
Single post service columns, usable from both sides for access. Installable anywhere in the workplace,connected to the centralised distribution system, they are real independent operational stations. Made from topquality materials, with scratchproof painting, and full width drip trays.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 275/419
2 6 8 5
2503 5055051452
2 6 8 5
SINGLE POST SERVICE COLUMNS 275275
Art. 39328
Art. 39324
OVERALL DIMENSIONS
for 4 hose reels2 hose reels series 260
for 8 hose reels2 hose reels series 260
Drip-tray
Universal drillingsfor application of
accessories
Art. 39324
Monitoring
Art. 39328
The upper part (ceiling) is arranged with holes for the application of hose reels series 390 - 430 - 450 - 530 and solenoid valves
for stopping the fluid. The inner side has holes for the application of hose reels series 260. Monitoring can be fitted on the frontface for computerised management of fluids.
No. 1 packing m 3 0,617 kg 270
No. 1 packing m 3 0,617 kg 224
Art. 39324
Two-sided service column for 4 hose reels
Art. 39328
Two-sided service column for 8 hose reels
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 276/419
SERVICE COLUMNS276276
Art. 39307
Service stand. Ideal service stations for rationalising the areas dedicated to delivery. Installable on walls or nearthe workplace, connected to the centralised distribution system, they are real independent operational stations.Made from top quality materials, and full width drip trays.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 277/419
SERVICES STANDS 277277
2 3 4 0
1550 4851070 485
2 3 4 0
Art. 39304
Drip-tray
Universal drillingsfor application of
accessories
OVERALL DIMENSIONS
Art. 39307
for 4 hose reels for 6 hose reels
Delivery gun - hose
hook
Art. 39304 Art. 39307
Service stand for 4 hose reels
Art. 39304
No. 1 packing m 3 0,505 kg 129
Service stand for 6 hose reels
Art. 39307
No. 1 packing m 3 0,505 kg 157
The upper part of the support is arranged with holes for the application of hose reels series 390 - 430 - 450 - 530 and solenoid
valves for stopping the fluid. They are also equipped with delivery gun hose hooks.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 278/419
SERVICE COLUMNS278278
Art. 39322
Single post service columns. Ideal service stations for rationalising the areas dedicated to delivery. Installableon walls, connected to the centralised distribution system, they are real independent operational stations. Madefrom top quality materials, with scratchproof painting.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 279/419
SINGLE POST SERVICE COLUMNS 279279
Art. 39322 Art. 39321
for 1 hose reel for 2 hose reel
2 4 4 8
128620125290
2 4 4 5
Universal drillingsfor application of
accessories
OVERALL DIMENSIONS
Art. 39321 Art. 39322
The upper part of the support is arranged with holes for the application of hose reels series 390 - 430 - 450 - 530 and solenoid
valves for stopping the fluid. The drip-tray can be applied frontally.
Holes for drip tray
Single post service column for 1 hose reel
Art. 39321
No. 1 packing m 3 0,114 kg 47
Single post service column for 2 hose reels
Art. 39322
No. 1 packing m 3 0,156 kg 61
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 280/419
SERVICE STAND280280
Service stand with containment tank. Ideal service stations for rationalising the areas dedicated to delivery. Able to collect any leaks or accidental spills, by means of the containment tanks, in compliance with the newregulations. Installable on walls, they are real independent operational stations. Made from top quality materials,with scratchproof painting.
Art. 39352
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 281/419
WITH CONTAINMENT TANK 281281
2 6 0 0
89514508951100
2 6 0 0
Art. 39351
Art. 39352
OVERALL DIMENSIONS
The upper part of the support is arranged with holes for the application of hose reels series 390 - 430 - 450 - 530 and solenoid
valves for stopping the fluid. A pump for suction and a drip-tray can be applied on the drilled central support.
Holes for application of
alternative pump
Holes fordrip-tray
Universal drillingsfor application of
accessories
for 2 hose reelplus 1 drum
for 3 hose reelplus 2 drum
Art. 39351 Art. 39352
Service stand for 2 hose reels with containmenttank for 1 drum 180 - 220 kg
Art. 39351
Service stand for 3 hose reels with containmenttank for 2 drums 180 - 220 kg
Art. 39352
No. 2 packing m 3 0,910 kg 210
No. 2 packing m 3 1,060 kg 245
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 282/419
CONTAINMENT TANKS282282
1350
3 5 0
830
1000
3 5 0
830
Art. 39901
OVERALL DIMENSIONS
Art. 39902
Containment tanks.Excellent solutions for cleanstorage of drums.
Able to collect any leaks oraccidental spills, in compliancewith the current regulations.Made from top quality materials,
with scratchproof painting.
Art. 39902
Art. 39901
Sump capacity is at least 1/3 of the total volume stored or not less than the biggest barrel, whichever is the greater
Containment tank for 1 drum 180 - 220 kg Art. 39901
Containment tank for 2 drums 180 - 220 kg
Art. 39902
No. 1 packing m 3 0,417 kg 87
No. 1 packing m 3 0,560 kg 115
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 283/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 284/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 285/419
INDUSTRIAL PUMPS 285285
page 286
page 301
page 309
page 312
CAPACITY PUMPS FOR OIL AND ALLIEDPRODUCTS
page 314
AISI 304 STAINLESS STEEL PUMPS page 320
CHOOSING A PUMP
PUMPS FOR OILS AND ALLIED PRODUCTS
GREASE PUMPS
HIGH CAPACITY GREASE PUMPS
ACCESSORIES page 322
9
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 286/419
INDUSTRIAL PUMPS286286
Series 1200Series 900
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 287/419
FOUR LARGE FAMILIES 287287
Series 1800Series 1500
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 288/419
TOTAL QUALITY 288288
Innovative design for optimising
the pump work cycle. The result of years of
research and development, during which
numerous tests were carried out
for thousands of work hours.
High quality materials used, cutting-edgeprocesses, hardening and grinding
for reducing internal friction and
limiting wear.
Fewer moving parts
for easy and occasional maintenance
with savings in running costs
The industrial pumps guarantee high
efficiency in capacity and operating pressure.
Double action ensures a continuous and
constant flow of the fluid delivered.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 289/419
VERSATILITY 289289
Air motor and pumping unit are separate so that the fluid cannot come
into direct contact with the motor body. They are recommended fortransferring non-aggressive industrial and chemical fluids. The motor
base is flanged to enable application of the handles which are useful foreasy moving and for simple fixing in various other applications.
The integral pumps and flanged pumps are available in the drum version and modular version(modular = extendable with a rigid suction tube, or in the wall application with a flexible suction tube)
INTEGRAL INDUSTRIAL PUMPS
Air motor and pumping unit form a single body. They are recommendedfor transferring non-corrosive fluids, oil and allied products.
Air motor and pumping unit form a single body.They are recommended for transferring non-corrosive fluids, oil and
allied products.The motor base is flanged to enable application of thehandles which are useful for easy moving and for simple fixing in
various other applications.
FLANGED INDUSTRIAL PUMPS
DIVORCED INDUSTRIAL PUMPS
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 290/419
CHOOSING A PUMP290290
RAASM has produceda wide range ofindustrial pumps
to meet themost
complexrequirements
for the varioussectors of use, such as:
industry, building, mining, shipyards, etc.In this wide array there is certainly thepump suitable for your application.
Guide table for choosing the pump suitable
for your needs
For other needs see page 152
To choose a pump it is essential to appraise
the following basic factors:
- type of fluid and its viscosity
- quantity to be delivered- distance between feed pump and delivery
point
- pressure for type of use
900
5:1
45 l/min
Pump series
Compression ration
Capacity
Low-viscosity fluids such as:various low-viscosity oils (SAE 15/20)
hydraulic fluid, diesel oil and allied products,etc.
Medium-viscosity fluids such as:motor oil, gearbox oil (SAE 15/140) etc.
High-viscosity fluids such as:
motor oil, gearbox oil (SAE 240) etc.
Medium and high-viscosity greases
Industrial liquids, inks, paints
Aggressive chemical fluids
For other technical data see the pages indicated
900
7:1
30 l/min
900
11:1
30 l/min
- -
- - -
1/2” - 1”
1:1
60 - 160 l/min
-
-
-
-
medium/long
distances
PU seals
page 301 page 302 page 304
medium/long
distances
PU seals
medium/long
distances
PU seals
medium/long
distances
PU seals
medium
distancesPU seals
medium/long
distancesPU seals
medium/long
distances
PU seals
medium/long
distancesPU seals
medium/long
distances
PU seals
short distance
transfer
PU seals
if compatible
with PU seals
if compatible
with PU seals
if compatible
with PU seals
page 156
medium
distances
NBR seals
short distances
NBR seals
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 291/419
SUITABLE FOR YOUR NEEDS 291291
900
45:1
4400 g/min
1200
75:1
4400 g/min
1200
40:1
10000 g/min
900
5:1
45 l/min
1200
9:1
42 l/min
900
2:1
95 l/min
1500
4:1
110 l/min
1200
18:1
23 l/min
- - - - -
- -
- -
- - - -
- - -
- - -
- - -
page 309 page 311 page 312 page 301 page 321 page 314 page 316 page 308
up to very long
distances
PU seals
up to very long
distances
PU seals
short distance
transfer
PU seals
up to very long
distancesPU seals
medium/long
distances
PU seals
medium/long
distances
PU seals
if compatible
with PU seals
if compatible
with PU seals
high-pressure
transfer or high
delivery long
distances
PU seals
medium/long
distances
Teflon seals
medium/long
distances
Teflon seals
medium/long
distancesTeflon seals
medium/long
distances
Teflon seals
medium/long
distances Teflon
seals s/steel
suction tube
medium/longdistances Teflon
seals s/steel
suction tube
medium/long
distances Teflon
seals s/steel
suction tube
medium/long
distances Teflon
seals s/steel
suction tube
medium/long
distances Teflon
seals s/steelsuction tube
medium/long
distances
PU seals
short/medium
distances
PU seals
short distances
PU seals
medium/long
distances
PU seals
medium/long
distances
PU seals
medium/long
distances
PU seals
medium/long
distancesPU seals
medium/long
distances
PU seals
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 292/419
292292 EXAMPLES OF INDUSTRIAL PUMP APPLICATIONS
Application of sealants, adhesives, greases, etc., by means of special delivery gun fed by pump mounted on drum in fixed or mobile station
Fluid distribution system (for paints, lubricants, protective liquids, etc.) fed by pump mounted ondrum in fixed station and delivery with spray gun.
Stations for continuous feed of machinery by meansof distribution of fluids in line (lubricants, inks, adhesives, etc.) with pump connected to the tank or fixed to the floor with bracket
Automated system for the delivery of preselected quantities of fluids (inks, paints, greases, etc.), fed by pumps mounted on drum, with lift
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 293/419
293293FLUID COMPATIBILITY TABLE
SealsType of fluid
Carbon steel
AISI 304 s/steel
Aluminium Polyurethane Teflon Viton NBR
Metal parts
YES
YES
YES
YES
NO
NO
NO
YES
NO
-
NO
YES
YES
YES
YES
YES
YES
-
YES
YES
NO
YES
NO
NO
NO
YES
NO
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
YES
YES
YES
-
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
NO
YES
YES
NO
NO
NO
NO
NO
YES
-
YES
NO
NO
-
YES
YES
-
NO
YES
NO
NO
-
-
-
-
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
YES
YES
YES
YES
YES
YES
-
YES
YES
YES
YES
NO
YES
YES
YES
YES
NO
NO
YES
YES
NO
YES
YES
-
YES
YES
YES
NO
YES
-
YES
NO
NO
NO
NO
YES
YES
NO
YES
YES
NO
-
YES
YES
-
YES
YES
NO
NO
YES
YES
-
NO
YES
NO
Acetone
Acetylene
Antifreeze (glycol solution)
ATF oils
Benzene
Bitumen
Bleaching solutions
Brake fluids
Citric acid
Cutting oils
Detergent (water solution)
Diesel oil
Ethyl alcohol
Gasoline
Glues
Grease and silicone oils
Kerosene
Lakes
Methyl alcohol (ethanol)
Minerals oils
Paint (water solutions)
Paint (xylene solutions)
Resin
Sewage
Syntetic detergent
Toluene (toluol)
Vegetable oils
Water
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 294/419
294294 INDUSTRIAL PUMP INSTALLATIONS
For tank with pump in inclined position
For tank with pump in vertical position mounted on bracket
For tank with pump in vertical position mounted on floor with bracket
For tank with pump in horizontal position
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 295/419
295295
For 200 kg drums, with single-acting hoist
For 200 kg drum, withdouble ram hoist and follower
For 200 kg drums, standard application
For 200 kg drums, with single-acting single-arm hoist
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 296/419
MINING SPECIALISTS
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 297/419
All rights reserved
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 298/419
298298 INDUSTRIAL PUMP INSTALLATIONS
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 299/419
299299
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 300/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 301/419
301301Series 900PUMPS FOR OIL AND SIMILAR
90F/5190C/51
Series 900 industrial air-operated
pumps for medium-long distance
distribution. Suitable for
transferring oils, lubricants andallied products, also high-viscosity.
The divorced version, with teflon
seals, can also be used for the
transfer of industrial and chemical
fluids. The high quality of the
components ensures lasting and
reliable operation even in extreme
conditions.
90D/51
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
INTEGRAL FLANGED DIVORCEDRatio 5:1 Capacity 45 l/min
0
16(232)
24(348)
bar(psi)
50 100 150 200
1,3
1,8
0
(m3 /min)
11,25(3,0)
22,50(5,9)
33,75(9,0)
45,00(11,9)
l/min(gpm)
1,0
36(522) A
B
C
A
B
C
F L U I D
O U
T L E T P R E S S U R E
A I R C
O N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
oils, lubricants
and allied products
polyurethane/PUaluminium
carbon steel
F 1/2”
F 3/4”
modular (F 1”)
ø 62
1,6 m3 /min
80 dB
8 bar
oils, lubricants
and allied products
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 3/4”
modular (F 1”)
ø 62
1,6 m3 /min
80 dB
8 bar
chemical and industrial
fluids
tefloncarbon steel
carbon steel
F 1/2”
F 3/4”
modular (F 1”)
ø 62
1,6 m3 /min
80 dB
8 bar
No. 1 packing m 3 0,040
kg 12
No. 1 packing m 3 0,040
kg 13
No. 1 packing m 3 0,045
kg 14,5
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 302/419
302302 PUMPS FOR OIL AND SIMILAR
91C/7190C/71
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
Series 900 industrial air-operated
pumps for medium-long distance
distribution. Suitable for
transferring oils, lubricants andallied products, also high-viscosity.
The divorced version, with teflon
seals, can also be used for the
transfer of industrial and chemical
fluids. The high quality of the
components ensures lasting and
reliable operation even in extreme
conditions.
INTEGRAL INTEGRALRatio 7:1 Capacity 30 l/min
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
oils, lubricants
and allied products
polyurethane/PUaluminium
carbon steel
F 1/2”
F 3/4”
modular (F 1”)
ø 53
1,6 m3 /min
80 dB
8 bar
oils, lubricants
and allied products
polyurethane/PUaluminium
carbon steel
F 1/2”
F 3/4”
940 mm
ø 53
1,6 m3 /min
80 dB
8 bar
No. 1 packing m 3 0,040
kg 11
No. 1 packing m 3 0,070
kg 13
A
B
C
A
B
C
F L U I D
O U
T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
bar(psi)
(m3 /min)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 303/419
303303Series 900
91F/7192C/71 90F/71 90D/71
INTEGRAL FLANGED FLANGED DIVORCED
oils, lubricants
and allied products
polyurethane/PUaluminium
carbon steel
F 1/2”
F 3/4”
1260 mm
ø 53
1,6 m3 /min
80 dB
8 bar
oils, lubricants
and allied products
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 3/4”
modular (F 1”)
ø 53
1,6 m3 /min
80 dB
8 bar
oils, lubricants
and allied products
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 3/4”
940 mm
ø 53
1,6 m3 /min
80 dB
8 bar
chemical
and industrial fluids
tefloncarbon steel
carbon steel
F 1/2”
F 3/4”
modular (F 1”)
ø 53
1,6 m3 /min
80 dB
8 bar
No. 1 packing m 3 0,080
kg 15
No. 1 packing m 3 0,040
kg 12
No. 1 packing m 3 0,070
kg 14
No. 1 packing m 3 0,045
kg 13,5
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 304/419
304304 PUMPS FOR OIL AND SIMILAR
91C/11190C/111
Series 900 industrial air-operated
pumps for medium-long distance
distribution.
Suitable for transferring oils,lubricants and allied products, also
high-viscosity. Ideal for transferring
medium/high viscosity greases.
The divorced version, with teflon
seals, can also be used for the
transfer of industrial and chemical
fluids.
The high quality of the components
ensures lasting and reliable
operation even in extreme
conditions.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
INTEGRAL INTEGRALRatio 11:1 Capacity 30 l/min
0
36(522)
58(841)
bar(psi)
65 130 195 260
0
(m3 /min)
7,5(2,0)
15(4,1)
22,5(6,1)
30,00(8,2)
l/min(gpm)
1,4
1,9
1,0
82(1189) A
B
C
A
B
C
F L U I D
O U
T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
No. 1 packing m 3 0,040
kg 11
No. 1 packing m 3 0,070
kg 16
oils, lubricants
and greases
polyurethane/PUaluminium
carbon steel
F 1/2”
F 3/4”
modular (F 1”)
ø 45
1,7 m3 /min
80 dB
8 bar
oils, lubricants
and greases
polyurethane/PUaluminium
carbon steel
F 1/2”
F 3/4”
940 mm
ø 45
1,7 m3 /min
80 dB
8 bar
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 305/419
305305Series 900
90F/111 90D/11191F/11192C/111
INTEGRAL FLANGED FLANGED DIVORCED
No. 1 packing m 3 0,070
kg 15
No. 1 packing m 3 0,045
kg 13
No. 1 packing m 3 0,070
kg 17
No. 1 packing m 3 0,045
kg 13
oils, lubricants
and greases
polyurethane/PUaluminium
carbon steel
F 1/2”
F 3/4”
740 mm
ø 45
1,7 m3 /min
80 dB
8 bar
oils, lubricants
and greases
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 3/4”
480 mm
ø 45
1,7 m3 /min
80 dB
8 bar
oils, lubricants
and greases
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 3/4”
940 mm
ø 45
1,7 m3 /min
80 dB
8 bar
chemical and
industrial fluids
tefloncarbon steel
carbon steel
F 1/2”
F 3/4”
modular (F 1”)
ø 45
1,7 m3 /min
80 dB
8 bar
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 306/419
306306 Series 1200PUMPS FOR OIL AND SIMILAR
115D/91115F/91
Series 1200 industrial air-operated
pumps for medium-long distance
distribution. Suitable for transferring
oils, lubricants and allied products,also high-viscosity. The divorced
version, with teflon seals, can also be
used for the transfer of industrial and
chemical fluids. The high quality of
the components ensures lasting and
reliable operation even in extreme
conditions.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
FLANGED DIVORCEDRatio 9:1 Capacity 45 l/min
0
30(435)
47(674)
bar(psi)
50 100 150 200
0
(m3 /min)
11,25(3,0)
22,50(5,9)
33,75(9,0)
45,00(11,9)
l/min(gpm)
2,4
3,2
1,7
62(899) A
B
C
A
B
C
F L U I D
O U
T L E T P R E S S U R E
A I R C
O N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
chemical and
industrial fluids
tefloncarbon steel
carbon steel
F 1/2”
F 3/4”
modular (F 1”)
ø 62
2,8 m3 /min
80 dB
8 bar
oil, lubricants
and allied products
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 3/4”
modular (F 1”)
ø 62
2,8 m3 /min
80 dB
8 bar
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
No. 1 packing m 3 0,040
kg 14
No. 1 packing m 3 0,045
kg 15,5
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 307/419
307307Series 1200PUMPS FOR OIL AND SIMILAR
115F/121 115D/121116F/121
Series 1200 industrial air-operated
pumps for medium-long distance
distribution. Suitable for transferring
oils, lubricants and allied products,also high-viscosity.
The divorced version, with teflon
seals, can also be used for the
transfer of industrial and chemical
fluids. The high quality of the
components ensures lasting and
reliable operation even in extreme
conditions.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
FLANGED DIVORCED FLANGEDRatio 12:1 Capacity 30 l/min
0
42(609)
66(957)
bar(psi)
50 100 150 200
0
(m3 /min)
12,00(3,2)
18,00(4,8)
24,00(6,3)
30,00(7,9)
l/min(gpm)
2,4
3,2
1,7
88(1276) A
B
C
A
B
C
F L U I D
O U
T L E T P R E S S U R E
A I R C
O N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
chemical and
industrial fluid
tefloncarbon steel
carbon steel
F 1/2”
F 3/4”
modular (F 1”)
ø 53
2,8 m3 /min
80 dB
8 bar
oil, lubricants
and allied products
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 3/4”
modular (F 1”)
ø 53
2,8 m3 /min
80 dB
8 bar
oil, lubricants
and allied products
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 3/4”
940 mm
ø 53
2,8 m3 /min
80 dB
8 bar
No. 1 packing m 3 0,070
kg 15
No. 1 packing m 3 0,045
kg 14,5
No. 1 packing m 3 0,040
kg 13
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 308/419
308308 Series 1200PUMPS FOR OIL AND SIMILAR
115F/181 115D/181116F/181
Series 1200 industrial air-operated
pumps for medium-long distance
distribution. Suitable for transferring
oils, lubricants and allied products,also high-viscosity. Ideal for the
transfer of medium/high-viscosity
grease. The divorced version, with
teflon seals, can also be used for the
transfer of industrial and chemical
fluids. The high quality of the
components ensures lasting and
reliable operation even in extreme
conditions.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
FLANGED DIVORCED FLANGEDRatio 18:1 Capacity 23 l/min
0
65(943)
102(1479)
bar(psi)
50 100 150 200
0
(m3 /min)
5,75(1,5)
11,50(3,0)
17,25(4,6)
23,00(6,1)
l/min(gpm)
2,4
3,2
1,7
142(2059) A
B
C
A
B
C
F L U I D
O U
T L E T P R E S S U R E
A I R C
O N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
chemical and
industrial fluids
tefloncarbon steel
carbon steel
F 1/2”
F 3/4”
modular (F 1”)
ø 45
2,8 m3 /min
80 dB
8 bar
oil, lubricants
and allied products
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 3/4”
480 mm
ø 45
2,8 m3 /min
80 dB
8 bar
oil, lubricants
and allied products
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 3/4”
940 mm
ø 45
2,8 m3 /min
80 dB
8 bar
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
No. 1 packing m 3 0,045
kg 15,5
No. 1 packing m 3 0,070
kg 18
No. 1 packing m 3 0,045
kg 14
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 309/419
309309Series 900GREASE PUMPS
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
91F/45190F/451
0
170(2465)
150(3625)
bar(psi)
50 100 150 200
1,3
1,8
0
(m3 /min)
1100(2,42)
2200(4,84)
3300(7,26)
4400(9,68)
g/min(lbspm)
1,0
330(4785) A
B
C
A
B
C
Series 900 industrial air-operated
pumps for medium-long distance
distribution. Suitable for the transferof medium/high-viscosity oils and
greases. The high quality of the
components ensures lasting and
reliable operation even in extreme
conditions whereas the double
action guarantees the delivery
of a continuous and constant flow.
Particularly effective in systems
equipped with several dispensing
points.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
FLANGED FLANGED FLANGED
92F/451
Ratio 45:1Capacity 4400 g/min
high viscosity oils and
greases
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1/2”
500 mm
ø 45
1,6 m3 /min
80 dB
8 bar
high viscosity oils
and greases
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1/2”
940 mm
ø 45
1,6 m3 /min
80 dB
8 bar
high viscosity oils
and greases
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1/2”
740 mm
ø 45
1,6 m3 /min
80 dB
8 bar
No. 1 packing m 3 0,045
kg 16
No. 1 packing m 3 0,070
kg 19
No. 1 packing m 3 0,070
kg 18
F L U I D
O U
T L E T P R E S S U R E
A I R C
O N S U M P T I O N
cycles/min
KIND OF FLUID: grease NLGI 1 - 20 °C
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 310/419
310310 Series 900GREASE PUMPS
Series 900 industrial air-operated
pumps for medium-long distance
distribution. Suitable for the transferof medium/high-viscosity oils and
greases. The high quality of the
components ensures lasting and
reliable operation even in extreme
conditions whereas the double
action guarantees the delivery
of a continuous and constant flow.
Particularly effective in systems
equipped with several dispensing
points.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
INTEGRALRatio 70:1Capacity 3000 g/min
0
240(3480)
370(5365)
bar(psi)
50 100 150 200
1,3
1,0
1,8
0
(m3 /min)
750(1,65)
1500(3,3)
2250(4,95)
3000(6,6)
g/min(lbspm)
510(7395) A
B
C
A
B
C
F L U I D
O U
T L E T P R E S S U R E
A I R C
O N S U M P T I O N
cycles/min
KIND OF FLUID: grease NLGI 1 - 20 °C
91C/701
high viscosity oils
and greases
polyurethane/PUaluminium
carbon steel
F 1/2”
F 1/2”
940 mm
ø 45
1,6 m3 /min
80 dB
8 bar
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
No. 1 packing m 3 0,070
kg 19
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 311/419
311311Series 1200GREASE PUMPS
116F/751115F/751
Series 1200 industrial air-operated
pumps for medium-long distance
distribution. Suitable for the transferof medium/high-viscosity oils and
greases. The high quality of the
components ensures lasting and
reliable operation even in extreme
conditions whereas the double
action guarantees the delivery
of a continuous and constant flow.
Particularly effective in systems
equipped with several dispensing
points.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
FLANGED FLANGED
117F/751
FLANGEDRatio 75:1Capacity 4400 g/min
0
280(4060)
410(5945)
bar(psi)
50 100 150 200
2,4
3,2
0
(m3 /min)
1100(2,42)
2200(4,84)
3300(7,26)
4400(9,68)
g/min(lbspm)
550(7975)
1,7
A
B
C
A
B
C
F L U I D
O U
T L E T P R E S S U R E
A I R C
O N S U M P T I O N
cycles/min
KIND OF FLUID: grease NLGI 1 - 20 °C
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
high viscosity oils
and greases
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1/2”
940 mm
ø 45
2,8 m3 /min
80 dB
8 bar
high viscosity oils
and greases
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1/2”
500 mm
ø 45
2,8 m3 /min
80 dB
8 bar
high viscosity oils
and greases
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1/2”
740 mm
ø 45
2,8 m3 /min
80 dB
8 bar
No. 1 packing m 3 0,045
kg 18
No. 1 packing m 3 0,070
kg 21
No. 1 packing m 3 0,070
kg 20
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 312/419
312312 Series 1200GREASE PUMPS
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
116F/401115F/401 117F/401
Series 1200 industrial
air-operated pumps for
medium-long distancedistribution.
Suitable for the transfer of
medium/high-viscosity oils and
greases, they guarantee high
performance in capacity (g/min)
and operating pressure.
The high quality of the
components ensures lasting
and reliable operation
even in extreme conditions.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
FLANGED FLANGED FLANGEDRatio 40:1Capacity 10000 g/min
0
160(2320)
260(3480)
bar(psi)
65 130 195 260
3,6
2,7
4,6
0
(m3 /min)
2250(5,0)
4500(9,9)
6750(14,9)
9000(19,8)
g/min(lbspm)
320(4640)
C
A
B
C
A
B
C
F L U I D
O U
T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: grease NLGI 2 - 20 °C
high viscosity oils
and greases
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1/2”
740 mm
ø 50,8 (2”)
2,8 m3 /min
80 dB
8 bar
high viscosity oils
and greases
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1/2”
940 mm
ø 50,8 (2”)
2,8 m3 /min
80 dB
8 bar
high viscosity oils
and greases
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1/2”
860 mm
ø 50,8 (2”)
2,8 m3 /min
80 dB
8 bar
No. 1 packing m 3 0,090
kg 19
No. 1 packing m 3 0,090
kg 23
No. 1 packing m 3 0,090
kg 21
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 313/419
313313Series 1500GREASE PUMPS
151F/701 152F/701
Series 1500 industrial
air-operated pumps for
medium-long distancedistribution.
Suitable for the transfer of
medium/high-viscosity oils and
greases, they guarantee high
performance in capacity (g/min)
and operating pressure.
The high quality of the
components ensures lasting
and reliable operation even
in extreme conditions.
Ratio 70:1Capacity 7000 g/min
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
FLANGED FLANGED
0
280(4060)
420(6090)
bar(psi)
40 80 120 160
4,0
3,0
5,0
0
(m3 /min)
1750(3,9)
3500(7,7)
5250(11,6)
7000(15,4)
g/min(lbspm)
560(8120)
A
B
C
A
B
C
F L U I D
O U
T L E T P R E S S U R E
A I R C O N S U M P T I O N
cycles/min
KIND OF FLUID: grease NLGI 2 - 20 °C
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
high viscosity oils
and greases
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1/2”
940 mm
ø 50,8 (2”)
4,3 m3 /min
80 dB
8 bar
high viscosity oils
and greases
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1/2”
860 mm
ø 50,8 (2”)
4,3 m3 /min
80 dB
8 bar
No. 1 packing m 3 0,20
kg 43
No. 1 packing m 3 0,20
kg 41
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 314/419
314314 Series 900PUMPS FOR OIL AND SIMILAR
90DV/2190D/21
Series 900 industrial air-operated
pumps for medium-long distance
distribution.
Suitable for transferring oils, lubricantsand allied products, they guarantee
high performance in capacity (l/min)
and operating pressure.
The version with viton seals can also
be used for the transfer of
industrial and chemical fluids.
The high quality of the components
ensures lasting and reliable operation
even in extreme conditions.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
DIVORCED DIVORCEDRatio 2:1 Capacity 95 l/min
A
B
C
A
B
C
F L U I D
O U T L E T P R E S S U R E
A I R C O
N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
oil, lubricants
and allied products
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1.1/2”
modular (F 2”)
ø 100
1,6 m3 /min
80 dB
8 bar
chemical and
industrial fluids
Vitoncarbon steel
carbon steel
F 1/2”
F 1.1/2”
modular (F 2”)
ø 100
1,6 m3 /min
80 dB
8 bar
No. 1 packing m 3 0,20
kg 45
No. 1 packing m 3 0,20
kg 45
bar(psi)
(m3 /min)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 315/419
315315Series 1200PUMPS FOR OIL AND SIMILAR
115DV/31115D/31
Series 1200 industrial air-operated
pumps for medium-long distance
distribution.
Suitable for transferring oils, lubricantsand allied products, they guarantee
high performance in capacity (l/min)
and operating pressure.
The version with viton seals can also
be used for the transfer of
industrial and chemical fluids.
The high quality of the components
ensures lasting and reliable operation
even in extreme conditions.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
DIVORCED DIVORCEDRatio 3:1 Capacity 100 l/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
oil, lubricants
and allied products
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1.1/2”
modular (F 2”)
ø 100
2,8 m3 /min
80 dB
8 bar
chemical and
industrial fluids
Vitoncarbon steel
carbon steel
F 1/2”
F 1.1/2”
modular (F 2”)
ø 100
2,8 m3 /min
80 dB
8 bar
No. 1 packing m 3 0,20
kg 46
No. 1 packing m 3 0,20
kg 46
A
B
C
A
B
C
F L U I D
O U T L E T P R E S S U R E
A I R C O
N S U M P T I O N
cycles/minbar(psi)
(m3 /min)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 316/419
316316 Series 1500PUMPS FOR OIL AND SIMILAR
150D/41
Series 1500 industrial
air-operated pumps for
medium-long distance
distribution. Suitable fortransferring oils, lubricants and
allied products, they guarantee
high performance in capacity
(l/min) and operating pressure.
The high quality of the
components ensures lasting
and reliable operation even in
extreme conditions.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
DIVORCEDRatio 4:1 Capacity 110 l/min
0
16(232)
24(348)
bar(psi)
30 60 90 120
3,5
4,4
0
(m3 /min)
2,6
32(464)
28(7,4)
56(14,8)
84(22,2)
112(29,6)
l/min(gpm)
A
B
C
A
B
C
F L U I D
O U T L E T P R E S S U R E
A I R C O
N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
oil, lubricants
and allied products
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1.1/2”
modular (F 2”)
ø 120
3,4 m3 /min
80 dB
8 bar
No. 1 packing m 3 0,20
kg 63
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 317/419
317317Series 1500PUMPS FOR OIL AND SIMILAR
150DV/61150D/61
Series 1500 industrial
air-operated pumps for
medium-long distance
distribution. Suitable fortransferring oils, lubricants and
allied products, they guarantee
high performance in capacity
(l/min) and operating pressure.
The version with viton seals can
also be used for the transfer of
industrial and chemical fluids.
The high quality of the
components ensures lasting and
reliable operation even in extreme
conditions.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
DIVORCED DIVORCEDRatio 6:1 Capacity 80 l/min
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
oil, lubricants
and allied products
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1.1/2”
modular (F 2”)
ø 100
3,4 m3 /min
80 dB
8 bar
chemical and
industrial fluids
Vitoncarbon steel
carbon steel
F 1/2”
F 1.1/2”
modular (F 2”)
ø 100
3,4 m3 /min
80 dB
8 bar
No. 1 packing m 3 0,20
kg 53
No. 1 packing m 3 0,20
kg 53
0
24(348)
36(522)
bar(psi)
30 60 90 120
3,5
4,4
0
(m3 /min)
2,6
48(696)
20(5,3)
40(10,6)
60(15,9)
80(21,1)
l/min(gpm)
A
B
C
A
B
C
F L U I D
O U T L E T P R E S S U R E
A I R C O
N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 318/419
318318 Series 1800PUMPS FOR OIL AND SIMILAR
180D/51
Series 1800 industrial air-operated
pumps for medium-long distance
distribution.
Suitable for transferring oils, lubricantsand allied products, they guarantee
high performance in capacity (l/min)
and operating pressure.
The high quality of the components
ensures lasting and reliable operation
even in extreme conditions.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
DIVORCEDRatio 5:1 Capacity 90 l/minRatio 5:1 Capacity 90 l/min
0
20(290)
30(435)
bar(psi)
30 60 90 120
4,4
5,5
0
(m3 /min)
28(7,4)
56(14,8)
84(22,2)
112(29,6)
l/min(gpm)
3,3
40(580)
A
B
C
A
B
C
F L U I D
O U T
L E T P R E S S U R E
A I R C O
N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
oil, lubricants
and allied products
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1.1/2”
modular (F 2”)
ø 120
4,2 m3 /min
80 dB
8 bar
No. 1 packing m 3 0,20
kg 65
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 319/419
319319Series 1800PUMPS FOR OIL AND SIMILAR
180D/81 180DV/81
Series 1800 industrial air-operated
pumps for medium-long distance
distribution. Suitable for transferring
oils, lubricants and allied products,they guarantee high performance in
capacity (l/min) and operating
pressure. The version with viton seals
can also be used for the transfer of
industrial fluids.
The high quality of the components
ensures lasting and reliable
operation even in extreme conditions.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
DIVORCED DIVORCEDRatio 8:1 Capacity 65 l/min
0
32
(464)
48(696)
bar(psi)
30 60 90 120
4,4
5,5
0
(m3 /min)
20(5,3)
40(10,6)
60(15,9)
80(21,1)
l/min(gpm)
3,3
64(928)
A
B
C
A
B
C
F L U I D
O U T
L E T P R E S S U R E
A I R C O
N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
oil, lubricants
and allied products
polyurethane/PUcarbon steel
carbon steel
F 1/2”
F 1.1/2”
modular (F 2”)
ø 100
4,2 m3 /min
80 dB
8 bar
chemical and
industrial fluids
Vitoncarbon steel
carbon steel
F 1/2”
F 1.1/2”
modular (F 2”)
ø 100
4,2 m3 /min
80 dB
8 bar
No. 1 packing m 3 0,20
kg 56
No. 1 packing m 3 0,20
kg 56
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 320/419
320320 AISI 304 S/STEEL PUMPS Series 900
95D/61
Series 900 stainless steel
industrial air-operated pumps for
medium-long distance distribution.
Suitable for the transfer of chemicaland industrial fluids. The high
quality of the components ensures
lasting and reliable operation
even in extreme conditions whereas
the double action guarantees the
delivery of a continuous and
constant flow. Particularly effective
in systems equipped with several
dispensing points.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
DIVORCEDRatio 6:1 Capacity 42 l/min
0
20(290)
30(435)
bar(psi)
50 100 150 200
1,3
1,8
0
(m3 /min)
10,25(2,7)
21,00(5,5)
32,50(8,6)
42,00(11,1)
l/min(gpm)
1,0
41(595) A
B
C
A
B
C
F L U I D
O U
T L E T P R E S S U R E
A I R C
O N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
chemical and
industrial fluids
teflon AISI 304 stainless steel
AISI 304 stainless steel
F 1/2”
F 3/4”
modular (F 1”)
ø 60
1,6 m3 /min
80 dB
8 bar
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
No. 1 packing m 3 0,045
kg 14,5
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 321/419
321321 AISI 304 S/STEEL PUMPS Series 1200
120D/91
Series 1200 stainless steel
industrial air-operated pumps for
medium-long distance distribution.
Suitable for the transfer of chemicaland industrial fluids.
The high quality of the components
ensures lasting and reliable
operationeven in extreme conditions
whereas the double action
guarantees the delivery of a
continuous and constant flow.
Particularly effective in systems
equipped with several dispensing
points.
A B C8 bar(116 psi)
6 bar(87 psi)
4 bar(58 psi)
DIVORCEDRatio 9:1 Capacity 42 l/min
0
33(478)
50(725)
bar(psi)
50 100 150 200
0
(m3 /min)
10,25(2,7)
21,00(5,5)
32,50(8,6)
42,00(11,1)
l/min(gpm)
2,4
3,2
1,7
67(972) A
B
C
A
B
C
F L U I D
O U
T L E T P R E S S U R E
A I R C
O N S U M P T I O N
cycles/min
KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C
Article
Compatible fluids
Type of sealsSuction tube upper body
Suction tube
Air inlet connection
Fluid outlet connection
Suction tube length
Suction tube diameter
Max. air consumption 8 bar
Noise level
Air max. feed pressure
chemical and
industrial fluids
teflon AISI 304 stainless steel
AISI 304 stainless steel
F 1/2”
F 3/4”
modular (F 1”)
ø 60
2,8 m3 /min
80 dB
8 bar
No. 1 packing m 3 0,045
kg 15,5
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 322/419
ACCESSORIES FOR INDUSTRIAL PUMPS322322
Art. 10/10
Art. 10/11
Art. 10/12
Art. 10/13
Art. 10/10
Wall bracket in painted steelfor wall-mounting of integral and flangedindustrial pumps, series 900 and 1200
Art.10/11
Wall bracket in painted steel with dampers
for wall-mounting of integral and flangedindustrial pumps, series 900 and 1200
Art. 10/12
Wall bracket in painted steelfor wall-mounting of divorced industrialpumps, series 900 and 1200
Art. 10/13
Wall bracket in painted steelwith dampers for wall-mountingof divorced industrial pumps,series 900 and 1200
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 323/419
ACCESSORIES FOR INDUSTRIAL PUMPS 323323
Art. 10/17
Art. 10/18
Art. 10/14
Art. 10/09
Art. 10/17
Wall bracket in painted steelwith dampersfor wall-mounting of flanged industrialpumps, series 1500 and 1800
Art. 10/18
Wall bracket in painted steel
with dampersfor wall-mounting of divorced industrialpumps, with suction tube Ø 100 mm,series 900 and 1200
Art. 10/14
Bung adaptor,for industrial pumps with suction tube,ø 45 mm series 900 and 1200
Art. 10/15
Bung adaptor,for industrial pumps with suction tube,ø 53 mm series 900 and 1200
Art. 10/09
Adaptor for integral and flanged pumpsseries 900 e 1200, for application withother brackets
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 324/419
ACCESSORIES FOR INDUSTRIAL PUMPS324324
Art. 10/50 Art. 10/51 Art. 10/52
Art. 10/55 Art. 10/56 Art. 10/57
Art. 65160 Art. 65142 Art. 65138
DRUM COVER FOR PUMPS WITH SUCTION TUBE Ø 45
DRUM COVER FOR PUMPS WITH SUCTION TUBE Ø 50,8
DRUM COVER WITH THREADED BUSHING 2” F
Drum cover
Drum cover
Follower plate
Union ø 45
Union ø 50,8
Union F 2”
Art. 10/50
Drum cover Ø 600 mm for drums 180 - 220 Kg(drums ext 550 - 600 mm)
Art. 10/51Drum cover Ø 420 mm for drums 50 - 60 Kg(drums ext 370 - 420 mm)
Art. 10/52
Drum cover Ø 385 mm for drums 30 - 50 Kg(drums ext 340 - 385 mm)
Art. 10/55
Drum cover Ø 600 mm for drums 180 - 220 Kg(drums ext 550 - 600 mm)
Art. 10/56
Drum cover Ø 420 mm for drums 50 - 60 Kg(drums ext 370 - 420 mm)
Art. 10/57
Drum cover Ø 385 mm for drums 30 - 50 Kg(drums ext 340 - 385 mm)
Art. 65160
Drum cover Ø 600 mm for drums 180 - 220 Kg(drums ext ø 550 - 600 mm) suitable to fit pump bung adaptor
Art. 65142
Drum cover Ø 420 mm for drums 50 - 60 Kg(drums ext ø 370 - 420 mm) suitable to fit pump bung adaptor
Art. 65138
Drum cover Ø 385 mm for drums 30 - 50 Kg(drums ext ø 340 - 385 mm) suitable to fit pump bung adaptor
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 325/419
ACCESSORIES FOR INDUSTRIAL PUMPS 325325
Art. 10/24
Art. 10/23
Art. 10/22
Art. 10/20
Art. 10/60 Art. 10/61 Art. 10/62
Art. 10/65 Art. 10/66 Art. 10/67
Union ø 50,8
FOLLOWER PLATE FOR PUMPS WITH SUCTION TUBE Ø 45
FOLLOWER PLATE FOR PUMPS WITH SUCTION TUBE Ø 50,8
Union ø 45
for other information refer to page 234
Art. 10/60
Follower plate Ø 585 mm for drums 180 - 220 Kg(drums int. ø 540 - 580 mm)
Art. 10/61
Follower plate Ø 400 mm for drums 50 - 60 Kg(drums int. ø 360 - 400 mm))
Art. 10/62
Follower plate Ø 370 mm for drums 30 - 50 Kg(drums int. ø 335 - 360 mm)
Art. 10/65
Follower plate Ø 585 mm for drums 180 - 220 Kg
(drums int. ø 540 - 580 mm) Art. 10/66
Follower plate Ø 400 mm for drums 50 - 60 Kg(drums int. ø 360 - 400 mm)
Art. 10/67
Follower plate Ø 370 mm for drums 30 - 50 Kg(drums int.ø 335 - 360 mm)
Art. 10/22
Extension ø 34 - thread 1”G - M/M - 660 mm
usable with modular pumpsseries 900 - 1200
Art. 10/23
Extension ø 34 - thread 1”G - M/M - 960 mmusable with modular pumpsseries 900 - 1200
Art. 10/24
Extension ø 34 - thread1”G - M/M - 1260 mmusable with modular pumpsseries 900 - 1200
Art. 10/20
Foot valve with filter - thread 1” F- for combining with extensions ø 34 - thread 1” M
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 326/419
ACCESSORIES FOR INDUSTRIAL PUMPS326326
Art. 33153
Art. 997.505
Art. 998.501 Art. 998.502
Art. 998.515 Art. 9911.310
Art. 33701 Art. 33703
Art. 33705
( * )
33701 Article
( * )
Not type-approved for public use
Articles not manufactured by Raasm( * )
( * )
33703 33705
for technical specification refer to page 205
for other hoses refer to page 408
Art. 997.505 Hose - 3/4” F/M - 5 m - 150 bar
Art. 998.501 Hose - 1” F/M - 1 m - 150 bar
Art. 998.502 Hose - 1” F/M - 2 m - 150 bar
Art. 998.515 Hose - 1” F/M - 15 m - 150 bar
Art. 9911.310 Hose - 1.1/2” F/M - 10 m - 10 bar
Art. 33153
High delivery oil and grease gun, equipped with:
- inlet swivel joint 3/4” F- rigid terminal with free outlet- maximum pressure 100 barIdeal for high deliveries of oils, lubricantsand allied products (refer to page 218)
Art. 33703
Digital litre-counter (weight 3.2 kg) for diesel oil, oil andantifreeze liquid, ideal for high capacity transfer pumps,equipped with:- connections F/F 1.1/2”- standard penlight battery powered
Art. 33701
Digital litre-counter (weight 1,6 kg) for oil and antifreezeliquid, ideal for high capacity transfer pumps equipped with:- connections F/F 3/4” - 1”
- standard penlight battery powered
Art. 33705
Digital litre-counter (weight 1,6 Kg) for diesel oil,ideal for high capacity transfer pumps, equipped with:- connections F/F 1”- standard penlight battery powered
Compatible fluids
Inlet
Outlet
Min. delivery
Max. delivery
Max. pressure
Tolerance
Max. viscosity
Weight
oils, lubricants
and similar
3/4”-1” F
3/4”-1” F
6 l/min
60 l/min
70 bar
+/- 0,5%
SAE 240
1600 g
diesel oil, oil
and similar
1.1/2” F
1.1/2” F
15 l/min
150 l/min
20 bar
+/- 0,5%
SAE 130
3200 g
diesel oil
1” F
1” F
10 l/min
100 l/min
30 bar
+/- 0,5%
diesel oil
1600 g
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 327/419
327327PUMP ELEVATORS
No. 1 packing m 3 0,380 kg 66
No. 1 packing m 3 1,155 kg 78
OVERALL DIMENSIONS
Art. 10/80Single column pump elevator with bedplate.
Suitable for drums 50 - 200 Kg
Art. 10/80
Art. 10/81
Art. 10/81
Single column pump elevator.Suitable for drums 50 - 200 Kg
Single column industrial pump
elevator with or without bedplate.
Elevator is air operated and liftspump assy via the side mounted
3-ways valve. Pump assy is lowered
by gravity. It is suitable for drums
50 - 200 Kg.
single columnpump elevator
1 7 6 3 ( s
t r o k e
1 0 0 0 )
866 630
1 7 3 8
( s t r o k e
1 0 0 0 )
715 255
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 328/419
328328 PUMP ELEVATOR
1086 630
1 7 6 3
( s t r o k e
1 0 0 0 )
OVERALL DIMENSIONS
Art. 10/82
Twin column industrial pump
elevator with bedplate.
Elevator is air operated and liftspump assy via the side mounted
3-ways valve. Pump assy is
lowered by gravity.
It is suitable for drums 50 - 200 Kg
twin columnpump elevator
Art. 10/82Twin column pump elevator with bedplate. It is suitablefor drums 50-200 Kg.
No. 1 packing m 3 1,448 kg 128
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 329/419
329329TWIN POST BRIDGE HOIST
1
7 1 1 ( s
t r o k e
1 0 0 0 )
1086 630
OVERALL DIMENSIONS
Art. 10/85Industrial pump elvevator and fluid press. It is suitable fordrums 50-200 Kg
Art. 10/85
Art. 11/60
Follower plate Ø 585 mm with double sealing NBR ring,to be used with air operated pump elevator - fluid press fordrums 180-220 Kg, for grease or high viscosity fluid.
Art. 11/60
Air operated twin ram hoist for
use with suitable industrial
pump.Essential when pumping hight
viscosity and heavy materials.
It is raised and lowered by
compressed air, via the side
mounted 3-way valve.
When used with a suitable
follower plate (supplied
separately) it ensures pump prime
on the heaviest materials.
Can be used with 50 - 200 Kg
drums with suitable follower plate.
No. 1 packing m 3 1,405 kg 162
twin postbridge hoist
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 330/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 331/419
SERIES 260 - ENCLOSED 20 BAR
SERIES AIR - WATER 20 BAR
SERIES WATER - HOT WATER 100 BAR
SERIES WATER - HOT WATER 200 BAR
SERIES WATER - HOT WATER 400 BAR
page 362
SERIES OIL AND ALLIED PRODUCTS 150 BAR page 370
SERIES GREASE 600 - 400 BAR page 378
SERIESDIESEL OIL 10
BAR page 386
SERIES WELDING 20 BAR page 390
SERIES LPG - NATURAL GAS 20 BAR page 392
ACCESSORIES - HOSES page 394
HOSE REEL ADVANTAGES
CHOOSING A HOSE REEL
GUIDE TO READING THE CATALOGUE
FOR CHOOSING A HOSE REEL
page 332
page 334
page 336
HOSE REELS 331331
SERIES AISI 304WATER - HOT WATER 200 - 400 BAR
10 - 100 BAR
page 338
page 340
page 348
page 354
page 358
10
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 332/419
HOSE REEL ADVANTAGES332332
Do you know how a steel tape measure is made?
Do you know how handy it is to use and rewind?
Imagine if the steel tape measure you often use does not have its special case which, as well as protecting
it, also allows you to extend it to the required length and rewind it easily with a single movement.
How would you manage it or take it with you?
But if you are already worried about managing a steel tape measure
without its special winding case, which does not weigh more
than 50 - 100 grams and is never more than 3 - 5 metres long,
how would you manage hoses 10 - 30 metres long and
weighing 5 - 30 kg?
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 333/419
333333
The hose reels are a handy solution for problems of space
The hose reels are compact and sturdy.
The hose reels enable the required length of hose to be quickly and easily extracted, for better work and
functionality.
With the hose reel, hose rewinding is quick and safe, for an orderly workplace free of hindrances, while
safeguarding against wear and possible breakage of the hoses themselves.
The hose reels keep the station clean and orderly. Operators can work in complete safety, with a device always
ready to be used.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 334/419
18 m - 3/8”18 m - 3/8”
15 m - 1/2”
18 m - 1/4”
15 m - 3/8”
17 m - 3/8” 15 m - 1/2”
16 m - 1/4”
380 - 390
stainless steelor painted
AIR - WATER 20 BAR
WATER 100 BAR
WATER 200 BAR
WATER 400 BAR
OIL, ANTIFREEZE AND ALLIED PRODUCTS 150 BAR
GREASE 600 BAR
DIESEL OIL 10 BAR
WELDING GAS 20 BAR
LPG - NATURAL GAS 20 BAR
420 - 430
stainless steelor painted
440 - 450
paintedsteel
CHOOSING A HOSE REEL334334
When choosing a hose reel, it is important toconsider the following aspects:
- type of fluid to be delivered,- flowrate in l/min. to be delivered,- length and diameter of hose to be used,- pressure of fluid
The table below will help you choose a hosereel according to the parameters given.
RAASM offers a very wide range
of hose reels
suitable for
numerous
needs.
11 m - 6x10
11 m - 8x12
260
plastic ABS
17 m - 5/16” 18 m - 3/8”
18 m - 3/8”
15 m - 1/2”
17 m - 3/8” 15 m - 1/2”
18 m - 1/4”
15 m - 3/8”
Note: The measurements in the table are approximate
-
-
-
-
-
- - - -
- - - -
- - - -
17 m - 5/16” 18 m - 3/8”
15 m - 1/2”
Hose reels series
Material
-
-
-
(page 338) (page 340) (page 340 - 362) (page 344)
(page 348) (page 348 - 364)
(page 354 - 366)(page 354)
(page 358) (page 358 - 368)
(page 374)(page 370)(page 370)
(page 378) (page 378) (page 382)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 335/419
25 m - 1/2”
60 m - 1/2”
40 m - 3/4”
30 m - 1”
25 m -1/2”
25 m - 3/8”
520 - 530
stainless steelor painted
560
stainless steelor painted
430 - 530 - 540
weldingpainted steel
430 - 530 - 540
natural gaspainted steel
618 - 638
paintedsteel
617 - 637
paintedsteel
SUITABLE FOR YOUR NEEDS 335335
30 m - 1/2”
20 m - 3/4”
15 m - 1”
30 m - 3/8”
540 - 550
stainless steelor painted
25 m - 3/8” 30 m - 3/8” 50 m - 3/8”
25 m - 1/2”
400 bar
100 m - 1/2”
400 bar
100 m - 1/2”
- - -
- - - -
25 m - 3/8” 30 m - 3/8” 50 m - 3/8”
25 m - 1/2” 40 m - 3/4”
30 m - 1”
-
-
35 m - 2 X 1/4”
35 m - 2 X 5/16”
27 m - 2 X 3/8”
30 m - 5/16”
30 m - 3/8”
-
-
100 m - 1/2”
60 m - 3/4”
40 m - 1”
100 m - 1/2”
60 m - 3/4”
40 m - 1”
- - - -
- - -
- -
100 m - 1/2”60 m - 3/4”
40 m - 1”
100 m - 1/2”
60 m - 3/4”
40 m - 1”
- - - -
- -
- -
- -
100 m - 1/2”
60 m - 3/4”
40 m - 1”
100 m - 1/2”
60 m - 3/4”
40 m - 1”
page 340 - 362)
page 348 - 364)
(page 354 - 366)(page 354 - 366)page 354 - 366)
page 358 - 368) (page 358 - 368)
(page 370)
(page 378) (page 378) (page 385) (page 384)
(page 388)(page 386)(page 386)(page 386)
(page 390)
(page 392)
(page 346)(page 347)(page 340 - 362)(page 340 - 362)
(page 348 - 364) (page 348 - 364) (page 353) (page 352)
(page 358 - 368)
(page 377) (page 376)(page 370)(page 370)
30 m - 1/2” 20 m - 3/4”
15 m - 1”
60 m - 1/2” 40 m - 3/4”
30 m - 1”
30 m - 1/2”
20 m - 3/4”
15 m - 1”
60 m - 1/2”
40 m - 3/4”
30 m - 1”
60 m - 3/4” 40 m - 1”30 m -1.1/4” 20 m -1.1/2”
(page 389)
60 m - 3/4”
40 m - 1” 20 m - 3/4”
15 m - 1”
-
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 336/419
without hose
without hose
without hose
without hose
without hose
without hose
without hose
The adj ust abl e arm s can be easily rep osit ione d acc ord ing to need s (see page 396).
The quick coupling support (see page 394)
that facilitates installation in battery is available by r equest.
The template supplied, facili tates dr illingof the holes and therefore hose reel fixing.
The same models, swivelling version, on page 342
OVERALL DIMENSIONS
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- brass swivel joint- “viton” seals
Hose length
Each page of the catalogue follows the same graphic layout. For greater clarity the various specifications for
choosing the hose reels are illustrated according to requirements and the characteristics of the RAASM range of
hose reels.
Stainless steel or paintedthis depends on theworkplace (closed or open)and the type of hose reeluse (protected or exposedto water sprays).
Open or enclosedthe enclosed version isavailable only for thefollowing fluids: air, oiland grease. The choiceis up to the customer
Overall dimensions
knowing the overalldimensions enables thesuitability of the hose reelstation to be duly checked.
Hose diameter
on which the capacity of thehose itself depends
Type of fluid
to be delivered(water, air, oil,grease, other)
Hose length
the distance betweenthe hose reel andthe places where thefluid is to bedelivered
Pressureof fluid to be deliveredlinked to the feed pressure
2 3 4
B
C
D
For example, suppose the customer has to use a hose reel:
- for feeding a 1/4” pneumatic screwer
- at an air feed pressure of approx. 8 - 10 bar
- with a maximum distance of 10 - 11 metres between hose reel and point of use
- in a closed place
The choice will be made as follows:
After taking into account the basic elements for the choice of hose reel, also the following optimum characteristics
will be considered:
Fixed or swivellingif the hose reel is used in abattery its operating rangewill be limited, thereforethe fixed version is
preferable.For uses requiring agreater operating rangethe swivelling version isrecommended
A
GUIDE TO READING THE CATALOGUE336336
1
Article Hose ø Connection
inlet outlet
PAINTED FIXED HOSE REELS
Air - Water 20 bar
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 337/419
TECHNICAL CHARACTERISTICS 337337
Adjustable arm:to favour hose extraction according to hose reel installation
Hose reel drum: sturdy and practical
with ribbing and rounded edges
Drum support bushings in brass alloy, self-lubricating, effective
and corrosion resistant
Fluid passage swivel joint in brass / carbon steel / s/steel /
AISI 304 s/steel with polyurethane / viton / teflon seals
Fully enclosed and protected constant-force
automatic rewinding spring
Automatic stopping system: allows the hoseto be locked at the required length
Self-lubricating
hose guide rollers:wide multi-way opening
Adjustable hose stop
Easy to install anywhere:on wall, floor, ceiling, vehicles, etc.
Corrosion proof: all the components are treated or painted for external use
Rewinding spring
The trip enables automatic stopping at the required length
Fluid conveyance joint
The easy to install adjustable bracket allowsthe hose reel to be remo-ved for any maintenance
Adjustable hose stop
Self-lubricating hose guide rollers
Drum support bushings in self-lubricating material
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 338/419
338338 ENCLOSED HOSE REELS Series 260
132
320
3 9 0
110
2 8 5
165
2 4
2
2 0
6
No. 1 packing m 3 0,019 kg 6,5
89010
89011
Enclosed hose reel equipped with adjustable support and wall bracket with bayonet hooking. Suitable for thedistribution of compressed air, for having tools always ready to use, and for low pressure delivery of water.
GASOLINE
Art. 89001
Quick fitting of the hose reel in the wall bracket and immediate connection to thecompressed air system
To prevent removal or theft of the hose reel, it can be secured with a bolt or padlock.
Air - Water 20 bar
11m (971.111)
11m (971.011)
8X12
6X10
M 1/4”G
M 1/4”G
M 1/4”G
M 1/4”G
Series 260 hose reels areequipped with a wall bracket with bayonet hooking.The placingof several brackets in the service points allows the hose reel to be easily moved to thevarious workstations.
OVERALL DIMENSIONS
wall supportwith bayonet hooking
Article Hose length Hose øConnection
inlet outlet
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 339/419
339339ENCLOSED HOSE REELS Series 260
318
3 2
0
110 40
2 8 5
1
3 0
3
1 8
9 4
9 4
Enclosed hose reel equipped with adjustable support. Suitable for the distribution of compressed air, forhaving tools always ready to use, and for low pressure delivery of water.
No. 1 packing m 3 0,019 kg 6
89109
89110
11m (971.111)
11m (971.011)
8X12
6X10
M 1/4”G
M 1/4”G
M 1/4”G
M 1/4”G
OVERALL DIMENSIONS
Air - Water 20 bar simplewall support
Article Hose length Hose ø Connection
inlet outlet
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 340/419
340340 PAINTED FIXED HOSE REELS
S. 390
S. 430
S. 530
S. 540
S. 560
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- brass swivel joint- “viton” seals
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 3/8”G
M 3/8”G
M 3/8”G
F 1/2”G
M 3/8”G
M 3/8”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
without hose
3/8”
3/8”
without hose
3/8”
3/8”
1/2”
1/2”
without hose
1/2”
1/2”
without hose
3/4”
3/4”
1”
without hose
1/2”
without hose
3/4”
3/4”
1”
1”
without hose
1/2”
1/2”
1/2”
/
12m (995.211)
18m (995.217)
/
12m (995.212)
18m (995.218)
10m (996.210)
15m (996.215)
/
20m (996.220)
25m (996.225)
/
15m (997.215)
20m (997.220)
15m (998.215)
/
30m (996.230)
/
30m (997.230)
40m (997.240)
20m (998.220)
30m (998.230)
/
40m (996.240)
50m (996.250)
60m (996.260)
8390.100
8390.101
8390.102
8430.100
8430.101
8430.102
8430.103
8430.104
8530.100
8530.101
8530.102
8540.100
8540.101
8540.102
8540.103
8540.105
8540.106
8560.100
8560.101
8560.103
8560.104
8560.105
8560.106
8560.107
8560.108
8560.109
The same models, swivelling version, on page 342
Air - Water 20 bar
1
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
OVERALL DIMENSIONS
H
F G
E
A
D C
B
Article Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,200 from kg 30 to 80
No. 1 packing m 3 0,050 from kg 11 to 18
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
A B C D E F G H186
186
203
300
488
140
140
153
218
399
196
196
220
228
238
226
226
258
268
272
110
115
115
190
368
400
460
550
550
522
ø 390
ø 420
ø 510
ø 510
ø 510
410
460
560
573
578
S. 390
S. 430
S. 530
S. 540
S. 560
Art.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 341/419
341341STAINLESS STEEL FIXED HOSE REELS
S. 390
S. 430
S. 530
S. 540
S. 560
The same models, swivelling version, on page 343
Air - Water 20 bar
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- brass swivel joint- “viton” seals
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 3/8”G
M 3/8”G
M 3/8”G
F 1/2”G
M 3/8”G
M 3/8”G
M 1/2”G
M 1/2” G
F 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
without hose
3/8”
3/8”
without hose
3/8”
3/8”
1/2”
1/2”
without hose
1/2”
1/2”
without hose
3/4”
3/4”
1”
without hose
1/2”
without hose
3/4”
3/4”
1”
1”
without hose
1/2”
1/2”
1/2”
/
12m (995.211)
18m (995.217)
/
12m (995.212)
18m (995.218)
10m (996.210)
15m (996.215)
/
20m (996.220)
25m (996.225)
/
15m (997.215)
20m (997.220)
15m (998.215)
/
30m (996.230)
/
30m (997.230)
40m (997.240)
20m (998.220)
30m (998.230)
/
40m (996.240)
50m (996.250)
60m (996.260)
8392.100
8392.101
8392.102
8432.100
8432.101
8432.102
8432.103
8432.104
8532.100
8532.101
8532.102
8542.100
8542.101
8542.102
8542.103
8542.105
8542.106
8562.100
8562.101
8562.103
8562.104
8562.105
8562.106
8562.107
8562.108
8562.109
1
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
OVERALL DIMENSIONS
H
F G
E
A
D C
B
Article Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,050 from kg 11 to 18
No. 1 packing m 3 0,120 from kg 24 to 40
No. 1 packing m 3 0,200 from kg 30 to 80
A B C D E F G H186
186
203
300
488
140
140
153
218
399
196
196
220
228
238
226
226
258
268
272
110
115
115
190
368
400
460
550
550
522
ø 390
ø 420
ø 510
ø 510
ø 510
410
460
560
573
578
S. 390
S. 430
S. 530
S. 540
S. 560
Art.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 342/419
342342 PAINTED SWIVELLING HOSE REELS
without hose
3/8”
3/8”
without hose
3/8”
3/8”
1/2”
1/2”
without hose
1/2”
1/2”
without hose
3/4”
3/4”
1”
without hose
1/2”
*
Air - water 20 bar
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 3/8”G
M 3/8”G
M 3/8”G
F 1/2”G
M 3/8”G
M 3/8”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
8380.100
8380.101
8380.102
8420.100
8420.101
8420.102
8420.103
8420.104
8520.100
8520.101
8520.102
8550.100
8550.101
8550.102
8550.103
8550.105
8550.106
/
12m (995.211)
18m (995.217)
/
12m (995.212)
18m (995.218)
10m (996.210)
15m (996.215)
/
20m (996.220)
25m (996.225)
/
15m (997.215)
20m (997.220)
15m (998.215)
/
30m (996.230)
S. 380
S. 420
S. 520
S. 550
The same models, fixed version, on page 340
Adjustable support for hose reel S.540
*
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- brass swivel joint- “viton” seals
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
No. 1 packing m 3 0,050 from kg 12 to 19
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
Article Hose
length Hose ø
Connection
inlet outlet
A B C D E F G H
184
208
228
300
S. 380
S. 420
S. 520
S. 550
Art.
146
162
182
218
106
118
154
226
144
164
200
268
110
115
115
190
400
460
560
560
ø 390
ø 420
ø 510
ø 510
484
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 343/419
343343STAINLESS STEEL SWIVELLING HOSE REELS
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 3/8”G
M 3/8”G
M 3/8”G
F 1/2”G
M 3/8”G
M 3/8”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
without hose
3/8”
3/8”
without hose
3/8”
3/8”
1/2”
1/2”
without hose
1/2”
1/2”
without hose
3/4”
3/4”
1”
without hose
1/2”
/
12m (995.211)
18m (995.217)
/
12m (995.212)
18m (995.218)
10m (996.210)
15m (996.215)
/
20m (996.220)
25m (996.225)
/
15m (997.215)
20m (997.220)
15m (998.215)
/
30m (996.230)
8382.100
8382.101
8382.102
8422.100
8422.101
8422.102
8422.103
8422.104
8522.100
8522.101
8522.102
8552.100
8552.101
8552.102
8552.103
8552.105
8552.106
*
Air - water 20 bar
S. 380
S. 420
S. 520
S. 550
The same models, fixed version, on page 341
Adjustable support for hose reel S.540
*
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- brass swivel joint- “viton” seals.
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
Article Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,050 from kg 12 to 19
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
A B C D E F G H
S. 380
S. 420
S. 520
S. 550
Art.
184
208
228
300
146
162
182
218
106
118
154
226
144
164
200
268
110
115
115
190
400
460
560
560
ø 390
ø 420
ø 510
ø 510
484
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 344/419
344344 ENCLOSED HOSE REELS
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
M 3/8”G
M 3/8”G
M 1/2”G
M 1/2”G
F 1/2”G
M 3/8”G
M 3/8”G
M 1/2”G
M 1/2”G
without hose
3/8”
3/8”
1/2”
1/2”
without hose
3/8”
3/8”
1/2”
1/2”
/
12m (995.212)
18m (995.218)
10m (996.210)
15m (996.215)
/
12m (995.212)
18m (995.218)
10m (996.210)
15m (996.215)
8450.100
8450.101
8450.102
8450.103
8450.104
8440.100
8440.101
8440.102
8440.103
8440.104
140
500
485
217
4 8 5
2 3 6
217
2 3 6
177
1 8 0
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- brass swivel joint- ”viton” seals
Air - Water 20 bar
S. 450
S. 440
FIXED
SWIVELLING
140
564
485
4 8 5
1 6 4
162
208
1 6 4
208
1 1 8
The swivelling hose reel installation system can be easily modified accordingto needs (see instructions on page 396)
OVERALL DIMENSIONS
OVERALL DIMENSIONS
1
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clampingwithtwo screws
-55
+550°
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,085 from kg 21 to 29
No. 1 packing m 3 0,085 from kg 22 to 30
The fixed hose reel installation systemcan be easily modified according to needs(see instructions on page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 345/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 346/419
346346 HYDRAULIC MOTOR-OPERATED HOSE REELS
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
without hose
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
without hose
1/2”
1/2”
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
/
30m (996.230)
40m (996.240)
50m (996.250)
15m (997.215)
20m (997.220)
30m (997.230)
15m (998.215)
20m (998.220)
/
60m (996.260)
70m (996.270)
80m (996.280)
90m (996.290)
100m (996.2100)
40m (997.240)
50m (997.250)
60m (997.260)
30m (998.230)
40m (998.240)
8617.100
8617.101
8617.102
8617.103
8617.104
8617.105
8617.106
8617.107
8617.108
8637.100
8637.101
8637.102
8637.103
8637.104
8637.105
8637.106
8637.107
8637.108
8637.109
8637.110
A
C
B
D E F
G
H
I
L
M
Hose reel with rewinding by hydraulicmotor, hoses in black synthetic rubberand galvanised steel fittings- brass swivel joint- ”viton” seals
The hydraulic motor-operated hose reels are designed for
applications requiring very sturdy equipment, with a powerful
rewinding system.
Their specific qualities enable the use of large diameter hoses for
rapid transfer with high deliveries.
Air - Water 20 bar
S. 637
S. 617
OVERALL DIMENSIONS
Note: For detailed hose reel fixing instructions refer to page 398
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,270 from kg 55 to 82
No. 1 packing m 3 0,370 from kg 75 to 126
A B C D E F G H I L M
283
467
185
370
140
140
130
130
310
310
360
360
220
400
463
649
692
692
570
570
621
621
S. 617
S. 637
Art.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 347/419
347347 AIR MOTOR-OPERATED HOSE REELS
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
without hose
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
without hose
1/2”
1/2”
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
/
30m (996.230)
40m (996.240)
50m (996.250)
15m (997.215)
20m (997.220)
30m (997.230)
15m (998.215)
20m (998.220)
/
60m (996.260)
70m (996.270)
80m (996.280)
90m (996.290)
100m (996.2100)
40m (997.240)
50m (997.250)
60m (997.260)
30m (998.230)
40m (998.240)
8618.100
8618.101
8618.102
8618.103
8618.104
8618.105
8618.106
8618.107
8618.108
8638.100
8638.101
8638.102
8638.103
8638.104
8638.105
8638.106
8638.107
8638.108
8638.109
8638.110
A
B
C
G
D F E
H
M
L
I
Hose reel with rewinding by air motor,hoses in black synthetic rubber andgalvanised steel fittings- brass swivel joint- ”viton” seals
Air - Water 20 bar
S. 638
S. 618
OVERALL DIMENSIONSThe air motor-operated hose reels are designed for
applications requiring very sturdy equipment, with a powerful
rewinding system.
Their specific qualities enable the use of large diameter hoses for
rapid transfer with high deliveries.
Note: For detailed hose reel fixing instructions refer to page 398
Article Hose
length Hose ø Connection
inlet outlet
No. 1 packing m 3 0,270 from kg 51 to 78
No. 1 packing m 3 0,370 from kg 71 to 122
A B C D E F G H I L M
283
467
185
370
140
140
130
130
310
310
360
360
220
400
555
740
692
692
570
570
621
621
S. 618
S. 638
Art.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 348/419
348348 PAINTED FIXED HOSE REELS
8390.200
8390.201
8390.202
8391.201
8430.200
8430.201
8430.202
8431.202
8530.200
8530.201
8530.202
8531.202
8540.200
8540.201
8540.202
8540.203
8540.205
8540.206
8541.202
8560.200
8560.201
8560.203
8560.204
8560.205
8560.206
8560.207
8560.208
8560.209
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 3/8”-1/2”G
M 3/8”G
M 3/8”G
M 3/8”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
M 3/4”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
without hose
3/8”
3/8”
3/8” hygieninc
without hose
1/2”
1/2”
1/2” hygieninc
without hose
1/2”
1/2”
1/2” hygieninc
without hose
3/4”
3/4”
1”
without hose
1/2”
3/4” hygieninc
without hose
3/4”
3/4”
1”
1”
without hose
1/2”
1/2”
1/2”
/
12m (995.313)
17m (995.318)
12m (995.412)
/
10m (996.311)
15m (996.316)
15m (996.415)
/
20m (996.321)
25m (996.326)
25m (996.425)
/
15m (997.315)
20m (997.320)
15m (998.315)
/
30m (996.331)
20m (997.420)
/
30m (997.330)
40m (997.340)
20m (998.320)
30m (998.330)
/
40m (996.341)
50m (996.351)
60m (996.361)
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- AISI 304 stainless steel swivel joint- ”viton” seals
Water up to 130° C 100 bar
S. 540
S. 390
S. 430
S. 530
S. 560
The same models, swivelling version, on page 350
1
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
OVERALL DIMENSIONS
H
F G
E
A
D C
B
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,050 from kg 11 to 18
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
No. 1 packing m 3 0,200 from kg 30 to 80
A B C D E F G HS. 390
S. 430
S. 530
S. 540
S. 560
Art.186
186
203
300
488
140
140
153
218
399
196
196
220
228
238
226
226
258
268
272
110
115
115
190
368
400
460
550
550
522
ø 390
ø 420
ø 510
ø 510
ø 510
410
460
560
573
578
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 349/419
349349STAINLESS STEEL FIXED HOSE REELS
8392.200
8392.201
8392.202
8393.201
8434.200
8432.201
8432.202
8433.202
8534.200
8532.201
8532.202
8533.202
8544.200
8542.201
8542.202
8542.203
8544.205
8542.206
8543.202
8564.200
8562.201
8562.203
8562.204
8562.205
8564.206
8562.207
8562.208
8562.209
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 3/8”-1/2”G
M 3/8”G
M 3/8”G
M 3/8”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
M 3/4”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
without hose
3/8”
3/8”
3/8” hygieninc
without hose
1/2”
1/2”
1/2” hygieninc
without hose
1/2”
1/2”
1/2” hygieninc
without hose
3/4”
3/4”
1”
without hose
1/2”
3/4” hygieninc
without hose
3/4”
3/4”
1”
1”
without hose
1/2”
1/2”
1/2”
/
12m (995.313)
17m (995.318)
12m (995.412)
/
10m (996.311)
15m (996.316)
15m (996.415)
/
20m (996.321)
25m (996.326)
25m (996.425)
/
15m (997.315)
20m (997.320)
15m (998.315)
/
30m (996.331)
20m (997.420)
/
30m (997.330)
40m (997.340)
20m (998.320)
30m (998.330)
/
40m (996.341)
50m (996.351)
60m (996.361)
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- AISI 304 stainless steel swivel joint- ”viton” seals
Water up to 130° C 100 bar
S. 540
S. 390
S. 430
S. 530
S. 560
The same models, swivelling version, on page 351
1
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
OVERALL DIMENSIONS
H
F G
E
A
D C
B
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,050 from kg 11 to 18
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
No. 1 packing m 3 0,200 from kg 30 to 80
A B C D E F G HS. 390
S. 430
S. 530
S. 540
S. 560
Art.186
186
203
300
488
140
140
153
218
399
196
196
220
228
238
226
226
258
268
272
110
115
115
190
368
400
460
550
550
522
ø 390
ø 420
ø 510
ø 510
ø 510
410
460
560
573
578
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 350/419
350350 PAINTED SWIVELLING HOSE REELS
No. 1 packing m 3 0,050 from kg 12 a 19
No. 1 packing m 3 0,065 from kg 20 a 43
No. 1 packing m 3 0,120 from kg 25 a 41
*
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- AISI 304 stainless steel swivel joint- ”viton” seals
Water up to 130° C 100 bar
S. 550
S. 380
S. 420
S. 520
8380.200
8380.201
8380.202
8381.201
8420.200
8420.201
8420.202
8421.202
8520.200
8520.201
8520.202
8521.202
8550.200
8550.201
8550.202
8550.203
8550.205
8550.206
8551.202
/
12m (995.313)
17m (995.318)
12m (995.412)
/
10m (996.311)
15m (996.316)
15m (996.415)
/
20m (996.321)
25m (996.326)
25m (996.425)
/
15m (997.315)
20m (997.320)
15m (998.315)
/
30m (996.331)
20m (997.420)
without hose
3/8”
3/8”
3/8” hygieninc
without hose
1/2”
1/2”
1/2” hygieninc
without hose
1/2”
1/2”
1/2” hygieninc
without hose
3/4”
3/4”
1”
without hose
1/2”
3/4” hygieninc
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1”G
F 3/8”-1/2”G
M 3/8”G
M 3/8”G
M 3/8”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
M 3/4”G
No. 1 packing m 3 0,065 from kg 15 a 25
The same models, fixed version, on page 348
Adjustable support for hose reel S.540*
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick couplin g adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
Article
Hose
length Hose ø
Connection
inlet outlet
A B C D E F G H
S. 380
S. 420
S. 520
S. 550
Art.
184
208
228
300
146
162
182
218
106
118
154
226
144
164
200
268
110
115
115
190
400
460
560
560
ø 390
ø 420
ø 510
ø 510
484
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 351/419
351351STAINLESS STEEL SWIVELLING HOSE REELS
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1”G
F 3/8”-1/2”G
M 3/8”G
M 3/8”G
M 3/8”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
M 3/4”G
without hose
3/8”
3/8”
3/8” hygieninc
without hose
1/2”
1/2”
1/2” hygieninc
without hose
1/2”
1/2”
1/2” hygieninc
without hose
3/4”
3/4”
1”
without hose
1/2”
3/4” hygieninc
/
12m (995.313)
17m (995.318)
12m (995.412)
/
10m (996.311)
15m (996.316)
15m (996.415)
/
20m (996.321)
25m (996.326)
25m (996.425)
/
15m (997.315)
20m (997.320)
15m (998.315)
/
30m (996.331)
20m (997.420)
8382.200
8382.201
8382.202
8383.201
8424.200
8422.201
8422.202
8423.202
8524.200
8522.201
8522.202
8523.202
8554.200
8552.201
8552.202
8552.203
8554.205
8552.206
8553.202
*
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- AISI 304 stainless steel swivel joint- ”viton” seals
Water up to 130° C 100 bar
S. 380
S. 420
S. 520
S. 550
The same models, fixed version, on page 349
Adjustable support for hose reel S.540*
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick couplin g adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,050 from kg 12 to 19
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
A B C D E F G H
S. 380
S. 420
S. 520
S. 550
Art.
184
208
228
300
146
162
182
218
106
118
154
226
144
164
200
268
110
115
115
190
400
460
560
560
ø 390
ø 420
ø 510
ø 510
484
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 352/419
352352 HYDRAULIC MOTOR-OPERATED HOSE REELS
A
C
B
D E F
G
H
I
L
M
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
without hose
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
without hose
1/2”
1/2”
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
/
30m (996.331)
40m (996.341)
50m (996.351)
15m (997.315)
20m (997.320)
30m (997.330)
15m (998.315)
20m (998.320)
/
60m (996.361)
70m (996.371)
80m (996.381)
90m (996.391)
100m (996.399)
40m (997.340)
50m (997.350)
60m (997.360)
30m (998.330)
40m (998.340)
8617.200
8617.201
8617.202
8617.203
8617.204
8617.205
8617.206
8617.207
8617.208
8637.200
8637.201
8637.202
8637.203
8637.204
8637.205
8637.206
8637.207
8637.208
8637.209
8637.210
S. 637
S. 617
Water up to 130° C 100 bar
OVERALL DIMENSIONS
Hose reel with rewinding by hydraulicmotor, hoses in black synthetic rubberand galvanised steel fittings- AISI 304 stainless steel swivel joint- ”viton” seals
The hydraulic motor-operated hose reels are designed for
applications requiring very sturdy equipment, with a powerful
rewinding system.
Their specific qualities enable the use of large diameter hoses for
rapid transfer with high deliveries.
Note: For detailed hose reel fixing instructions refer to page 398
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,270 from kg 55 to 74
No. 1 packing m 3 0,370 from kg 75 to 118
A B C D E F G H I L M
283
467
185
370
140
140
130
130
310
310
360
360
220
400
463
649
692
692
570
570
621
621
S. 617
S. 637
Art.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 353/419
353353 AIR MOTOR-OPERATED HOSE REELS
A
B
C
G
D F E
H
M
L
I
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
without hose
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
without hose
1/2”
1/2”
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
/
30m (996.331)
40m (996.341)
50m (996.351)
15m (997.315)
20m (997.320)
30m (997.330)
15m (998.315)
20m (998.320)
/
60m (996.361)
70m (996.371)
80m (996.381)
90m (996.391)
100m (996.399)
40m (997.340)
50m (997.350)
60m (997.360)
30m (998.330)
40m (998.340)
8618.200
8618.201
8618.202
8618.203
8618.204
8618.205
8618.206
8618.207
8618.208
8638.200
8638.201
8638.202
8638.203
8638.204
8638.205
8638.206
8638.207
8638.208
8638.209
8638.210
S. 638
S. 618
Water up to 130° C 100 bar
OVERALL DIMENSIONS
Hose reel with rewinding by air motor,hoses in black synthetic rubber andgalvanised steel fittings- AISI 304 stainless steel swivel joint- ”viton” seals
The air motor-operated hose reels are designed for
applications requiring very sturdy equipment, with a powerful
rewinding system.
Their specific qualities enable the use of large diameter hoses for
rapid transfer with high deliveries.
Note: For detailed hose reel fixing instructions refer to page 398
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,270 from kg 51 to 78
No. 1 packing m 3 0,370 from kg 71 to 122
A B C D E F G H I L M
283
467
185
370
140
140
130
130
310
310
360
360
220
400
555
740
692
692
570
570
621
621
S. 618
S. 638
Art.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 354/419
354354 PAINTED FIXED HOSE REELS
8390.300
8390.301
8390.302
8391.301
8430.300
8430.301
8430.302
8431.302
8530.300
8530.301
8530.302
8531.302
8540.300
8540.301
8541.301
8560.300
8560.301
8560.302
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
without hose
5/16”
5/16”
5/16” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8” hygieninc
without hose
3/8”
3/8”
/
12m (994.512)
17m (994.517)
12m (994.612)
/
12m (995.512)
18m (995.518)
18m (995.618)
/
20m (995.520)
25m (995.525)
25m (995.625)
/
30m (995.530)
30m (995.630)
/
40m (995.540)
50m (995.550)
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- AISI 304 stainless steel swivel joint- ”viton” seals
Water up to 130° C 200 bar
S. 390
S. 430
S. 530
S. 540
S. 560
The same models, swivelling version, on page 356
1
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
OVERALL DIMENSIONS
H
F G
E
A
D C
B
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,050 from kg 11 to 18
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
No. 1 packing m 3 0,200 from kg 30 to 80
A B C D E F G H
S. 390
S. 430
S. 530
S. 540
S. 560
Art. 186
186
203
300
488
140
140
153
218
399
196
196
220
228
238
226
226
258
268
272
110
115
115
190
368
400
460
550
550
522
ø 390
ø 420
ø 510
ø 510
ø 510
410
460
560
573
578
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 355/419
355355STAINLESS STEEL FIXED HOSE REELS
8392.300
8392.301
8392.302
8393.301
8434.300
8432.301
8432.302
8433.302
8534.300
8532.301
8532.302
8533.302
8544.300
8542.301
8543.301
8564.300
8562.301
8562.302
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
without hose
5/16”
5/16”
5/16” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8” hygieninc
without hose
3/8”
3/8”
/
12m (994.512)
17m (994.517)
12m (994.612)
/
12m (995.512)
18m (995.518)
18m (995.618)
/
20m (995.520)
25m (995.525)
25m (995.625)
/
30m (995.530)
30m (995.630)
/
40m (995.540)
50m (995.550)
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- AISI 304 stainless steel swivel joint- ”viton” seals
Water up to 130° C 200 bar
S. 390
S. 430
S. 530
S. 540
S. 560
The same models, swivelling version, on page 357
1
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
OVERALL DIMENSIONS
H
F G
E
A
D C
B
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,050 from kg 11 to 18
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
No. 1 packing m 3 0,200 from kg 30 to 80
A B C D E F G HS. 390
S. 430
S. 530
S. 540
S. 560
Art.186
186
203
300
488
140
140
153
218
399
196
196
220
228
238
226
226
258
268
272
110
115
115
190
368
400
460
550
550
522
ø 390
ø 420
ø 510
ø 510
ø 510
410
460
560
573
578
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 356/419
356356 PAINTED SWIVELLING HOSE REELS
8380.300
8380.301
8380.302
8381.301
8420.300
8420.301
8420.302
8421.302
8520.300
8520.301
8520.302
8521.302
8550.300
8550.301
8551.301
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
without hose
5/16”
5/16”
5/16” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8” hygieninc
/
12m (994.512)
17m (994.517)
12m (994.612)
/
12m (995.512)
18m (995.518)
18m (995.618)
/
20m (995.520)
25m (995.525)
25m (995.625)
/
30m (995.530)
30m (995.630)
*
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- AISI 304 stainless steel swivel joint- ”viton” seals
S. 380
S. 420
S. 520
S. 550
Water up to 130° C 200 bar
The same models, fixed version, on page 354
Adjustable support for hose reel S.540*
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,050 from kg 12 to 19
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
A B C D E F G H
S. 380
S. 420
S. 520
S. 550
Art.
184
208
228
300
146
162
182
218
106
118
154
226
144
164
200
268
110
115
115
190
400
460
560
560
ø 390
ø 420
ø 510
ø 510
484
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 357/419
357357STAINLESS STEEL SWIVELLING HOSE REELS
8382.300
8382.301
8382.302
8383.301
8424.300
8422.301
8422.302
8423.302
8524.300
8522.301
8522.302
8523.302
8554.300
8552.301
8553.301
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
without hose
5/16”
5/16”
5/16” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8” hygieninc
/
12m (994.512)
17m (994.517)
12m (994.612)
/
12m (995.512)
18m (995.518)
18m (995.618)
/
20m (995.520)
25m (995.525)
25m (995.625)
/
30m (995.530)
30m (995.630)
No. 1 packing m 3 0,050 from kg 12 to 19
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
*
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- AISI 304 stainless steel swivel joint- ”viton” seals
S. 380
S. 420
S. 520
S. 550
Water up to 130° C 200 bar
The same models, fixed version, on page 355
Adjustable support for hose reel S.540*
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
Article
Hose
length Hose ø
Connection
inlet outlet
A B C D E F G H
S. 380
S. 420
S. 520
S. 550
Art.
184
208
228
300
146
162
182
218
106
118
154
226
144
164
200
268
110
115
115
190
400
460
560
560
ø 390
ø 420
ø 510
ø 510
484
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 358/419
358358 PAINTED FIXED HOSE REELS
8390.350
8390.351
8390.352
8391.351
8430.350
8430.351
8430.352
8431.352
8530.350
8530.351
8530.352
8531.352
8540.350
8540.351
8541.351
8560.350
8560.351
8560.352
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
without hose
5/16”
5/16”
5/16” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8” hygieninc
without hose
3/8”
3/8”
/
12m (994.712)
17m (994.717)
12m (994.812)
/
12m (995.812)
18m (995.818)
18m (995.918)
/
20m (995.820)
25m (995.825)
25m (995.925)
/
30m (995.830)
30m (995.930)
/
40m (995.840)
50m (995.850)
No. 1 packing m 3 0,050 from kg 11 to 18
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
No. 1 packing m 3 0,200 from kg 30 to 80
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- AISI 304 stainless steel swivel joint- ”teflon” seals
S. 390
S. 430
S. 530
S. 540
S. 560
Water up to 130° C 400 bar
The same models, swivelling version, on page 360
1
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
OVERALL DIMENSIONS
H
F G
E
A
D C
B
Article
Hose
length Hose ø
Connection
inlet outlet
A B C D E F G HS. 390
S. 430
S. 530
S. 540
S. 560
Art.186
186
203
300
488
140
140
153
218
399
196
196
220
228
238
226
226
258
268
272
110
115
115
190
368
400
460
550
550
522
ø 390
ø 420
ø 510
ø 510
ø 510
410
460
560
573
578
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 359/419
359359STAINLESS STEEL FIXED HOSE REELS
8392.350
8392.351
8392.352
8393.351
8434.350
8432.351
8432.352
8433.352
8534.350
8532.351
8532.352
8533.352
8544.350
8542.351
8543.351
8564.350
8562.351
8562.352
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
/
12m (994.712)
17m (994.717)
12m (994.812)
/
12m (995.812)
18m (995.818)
18m (995.918)
/
20m (995.820)
25m (995.825)
25m (995.925)
/
30m (995.830)
30m (995.930)
/
40m (995.840)
50m (995.850)
No. 1 packing m 3 0,050 from kg 11 to 18
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
No. 1 packing m 3 0,200 from kg 30 to 80
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- AISI 304 stainless steel swivel joint- ”teflon” seals
S. 390
S. 430
S. 530
S. 540
S. 560
without hose
5/16”
5/16”
5/16” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8” hygieninc
without hose
3/8”
3/8”
Water up to 130° C 400 bar
The same models, swivelling version, on page 361
1
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
OVERALL DIMENSIONS
H
F G
E
A
D C
B
Article
Hose
length Hose ø
Connection
inlet outlet
A B C D E F G HS. 390
S. 430
S. 530
S. 540
S. 560
Art.186
186
203
300
488
140
140
153
218
399
196
196
220
228
238
226
226
258
268
272
110
115
115
190
368
400
460
550
550
522
ø 390
ø 420
ø 510
ø 510
ø 510
410
460
560
560
578
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 360/419
360360 PAINTED SWIVELLING HOSE REELS
8380.350
8380.351
8380.352
8381.351
8420.350
8420.351
8420.352
8421.352
8520.350
8520.351
8520.352
8521.352
8550.350
8550.351
8551.351
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
without hose
5/16”
5/16”
5/16” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8” hygieninc
/
12m (994.712)
17m (994.717)
12m (994.812)
/
12m (995.812)
18m (995.818)
18m (995.918)
/
20m (995.820)
25m (995.825)
25m (995.925)
/
30m (995.830)
30m (995.930)
*
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- AISI 304 stainless steel swivel joint- ”teflon” seals
Water up to 130° C 400 bar
S. 380
S. 420
S. 520
S. 550
The same models, fixed version, on page 358
Adjustable support for hose reel S.540*
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
No. 1 packing m 3 0,050 from kg 12 to 19
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
Article
Hose
length Hose ø
Connection
inlet outlet
A B C D E F G H
S. 380
S. 420
S. 520
S. 550
Art.
184
208
228
300
146
162
182
218
106
118
154
226
144
164
200
268
110
115
115
190
400
460
560
560
ø 390
ø 420
ø 510
ø 510
484
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 361/419
361361STAINLESS STEEL SWIVELLING HOSE REELS
8382.350
8382.351
8382.352
8383.351
8424.350
8422.351
8422.352
8423.352
8524.350
8522.351
8522.352
8523.352
8554.350
8552.351
8553.351
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
without hose
5/16”
5/16”
5/16” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8”
3/8” hygieninc
without hose
3/8”
3/8” hygieninc
/
12m (994.712)
17m (994.717)
12m (994.812)
/
12m (995.812)
18m (995.818)
18m (995.918)
/
20m (995.820)
25m (995.825)
25m (995.925)
/
30m (995.830)
30m (995.930)
*
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- AISI 304 stainless steel swivel joint- ”teflon” seals
Water up to 130° C 400 bar
S. 380
S. 420
S. 520
S. 550
The same models, fixed version, on page 359
Adjustable support for hose reel S.540*
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,050 from kg 12 to 19
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
A B C D E F G H
S. 380
S. 420
S. 520
S. 550
Art.
184
208
228
300
146
162
182
218
106
118
154
226
144
164
200
268
110
115
115
190
400
460
560
560
ø 390
ø 420
ø 510
ø 510
484
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 362/419
362362 S/STEEL FIXED HOSE REELS
8434.200
8434.101
8434.102
8534.200
8534.101
8534.102
8544.200
8544.101
8544.102
8544.103
8544.205
8544.106
8564.200
8564.101
8564.103
8564.104
8564.105
8564.206
8564.107
8564.108
8564.109
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
without hose
1/2” hygieninc
1/2” hygieninc
without hose
1/2” hygieninc
1/2” hygieninc
without hose
3/4” hygieninc
3/4” hygieninc
1” hygieninc
without hose
1/2” hygieninc
without hose
3/4” hygieninc
3/4” hygieninc
1” hygieninc
1” hygieninc
without hose
1/2” hygieninc
1/2” hygieninc
1/2” hygieninc
/
10m (986.110)
15m (986.115)
/
20m (986.120)
25m (986.125)
/
15m (987.115)
20m (987.120)
15m (988.115)
/
30m (986.130)
/
30m (987.130)
40m (987.140)
20m (988.120)
30m (988.130)
/
40m (986.140)
50m (986.150)
60m (986.160)
Hose reel with hoses in syntheticrubber with blue hygienic coveringand AISI 304 fittings- AISI 304 stainless steel swivel joint- ”viton” seals
S. 430
S. 530
S. 540
S. 560
Air - Water 10 bar
1
OVERALL DIMENSIONS
H
F G
E
A
D C
B
AISI 304
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
No. 1 packing m 3 0,200 from kg 30 to 80
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
A B C D E F G H
S. 430
S. 530
S. 540
S. 560
Art.
186
203
300
488
140
153
218
399
196
220
228
238
226
258
268
272
115
115
190
368
460
550
550
522
ø 420
ø 510
ø 510
ø 510
460
560
573
578
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 363/419
363363S/STEEL SWIVELLING HOSE REELS
10 BAR ARIA ACQUA
8424.200
8424.101
8424.102
8524.200
8524.101
8524.102
8554.200
8554.101
8554.102
8554.103
8554.205
8554.106
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
without hose
1/2” hygieninc
1/2” hygieninc
without hose
1/2” hygieninc
1/2” hygieninc
without hose
3/4” hygieninc
3/4” hygieninc
1” hygieninc
without hose
1/2” hygieninc
/
10m (986.110)
15m (986.115)
/
20m (986.120)
25m (986.125)
/
15m (987.115)
20m (987.120)
15m (988.115)
/
30m (986.130)
Hose reel with hoses in syntheticrubber with blue hygienic coveringand AISI 304 fittings- AISI 304 stainless steel swivel joint- ”viton” seals
*
S. 420
S. 520
S. 550
Air - Water 10 bar
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
Adjustable support for hose reel S.540*
AISI 304
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
Article
Hose
length Hose ø
Connection
inlet outlet
The adjustable arms can be easily repo si ti one d acco rd in g to nee ds(see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
A B C D E F G H
S. 420
S. 520
S. 550
Art.
208
228
300
162
182
218
118
154
226
164
200
268
115
115
190
460
560
560
ø 420
ø 510
ø 510
541
642
703
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 364/419
364364 S/STEEL FIXED HOSE REELS AISI 304
8434.200
8434.201
8434.202
8534.200
8534.201
8534.202
8544.200
8544.201
8544.202
8544.203
8544.205
8544.206
8564.200
8564.201
8564.203
8564.204
8564.205
8564.206
8564.207
8564.208
8564.209
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
without hose
1/2” hygieninc
1/2” hygieninc
without hose
1/2” hygieninc
1/2” hygieninc
without hose
3/4” hygieninc
3/4” hygieninc
1” hygieninc
without hose
1/2” hygieninc
without hose
3/4” hygieninc
3/4” hygieninc
1” hygieninc
1” hygieninc
without hose
1/2” hygieninc
1/2” hygieninc
1/2” hygieninc
/
10m (986.410)
15m (986.415)
/
20m (986.420)
25m (986.425)
/
15m (987.415)
20m (987.420)
15m (988.415)
/
30m (986.430)
/
30m (987.430)
40m (987.440)
20m (988.420)
30m (988.430)
/
40m (986.440)
50m (986.450)
60m (986.460)
Hose reel with hoses in syntheticrubber with blue hygienic coveringand AISI 304 fittings- AISI 304 stainless steel swivel joint- ”viton” seals
Water up to 130° C 100 bar
S. 430
S. 530
S. 540
S. 560
1
OVERALL DIMENSIONS
H
F G
E
A
D C
B
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
No. 1 packing m 3 0,200 from kg 30 to 80
Article
Hose
length Hose ø
Connection
inlet outlet
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
A B C D E F G H
S. 430
S. 530
S. 540
S. 560
Art.
186
203
300
488
140
153
218
399
196
220
228
238
226
258
268
272
115
115
190
368
460
550
550
522
ø 420
ø 510
ø 510
ø 510
460
560
573
578
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 365/419
365365S/STEEL SWIVELLING HOSE REELS AISI 304
Water up to 130° C 100 bar
8424.200
8424.201
8424.202
8524.200
8524.201
8524.202
8554.200
8554.201
8554.202
8554.203
8554.205
8554.206
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
without hose
1/2” hygieninc
1/2” hygieninc
without hose
1/2” hygieninc
1/2” hygieninc
without hose
3/4” hygieninc
3/4” hygieninc
1” hygieninc
without hose
1/2” hygieninc
/
10m (986.410)
15m (986.415)
/
20m (986.420)
25m (986.425)
/
15m (987.415)
20m (987.420)
15m (988.415)
/
30m (986.430)
Hose reel with hoses in syntheticrubber with blue hygienic coveringand AISI 304 fittings- AISI 304 stainless steel swivel joint- ”viton” seals
*
S. 420
S. 520
S. 550
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
Adjustable support for hose reel S.540*
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
Article
Hose
length Hose ø
Connection
inlet outlet
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
A B C D E F G H
S. 420
S. 520
S. 550
Art.
208
228
300
162
182
218
118
154
226
164
200
268
115
115
190
460
560
560
ø 420
ø 510
ø 510
541
642
703
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 366/419
366366 S/STEEL FIXED HOSE REELS AISI 304
8434.300
8434.301
8434.302
8534.300
8534.301
8534.302
8544.300
8544.301
8564.300
8564.301
8564.302
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
without hose
3/8” hygieninc
3/8” hygieninc
without hose
3/8” hygieninc
3/8” hygieninc
without hose
3/8” hygieninc
without hose
3/8” hygieninc
3/8” hygieninc
/
12m (985.612)
18m (985.618)
/
20m (985.620)
25m (985.625)
/
30m (985.630)
/
40m (985.640)
50m (985.650)
Hose reel with hoses in syntheticrubber with blue hygienic coveringand AISI 304 fittings- AISI 304 stainless steel swivel joint- ”viton” seals
Water up to 130° C 200 bar
S. 430
S. 530
S. 540
S. 560
1
OVERALL DIMENSIONS
H
F G
E
A
D C
B
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
No. 1 packing m 3 0,200 from kg 30 to 80
Article
Hose
length Hose ø
Connection
inlet outlet
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
A B C D E F G H
S. 430
S. 530
S. 540
S. 560
Art.
186
203
300
488
140
153
218
399
196
220
228
238
226
258
268
272
115
115
190
368
460
550
550
522
ø 420
ø 510
ø 510
ø 510
460
560
573
578
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 367/419
367367S/STEEL SWIVELLING HOSE REELS AISI 304
Water up to 130° C 200 bar
8424.300
8424.301
8424.302
8524.300
8524.301
8524.302
8554.300
8554.301
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
without hose
3/8” hygieninc
3/8” hygieninc
without hose
3/8” hygieninc
3/8” hygieninc
without hose
3/8” hygieninc
/
12m (985.612)
18m (985.618)
/
20m (985.620)
25m (985.625)
/
30m (985.630)
Hose reel with hoses in syntheticrubber with blue hygienic coveringand AISI 304 fittings- AISI 304 stainless steel swivel joint- ”viton” seals
*
S. 420
S. 520
S. 550
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
Adjustable support for hose reel S.540*
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
Article
Hose
length Hose ø
Connection
inlet outlet
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
A B C D E F G H
S. 420
S. 520
S. 550
Art.
208
228
300
162
182
218
118
154
226
164
200
268
115
115
190
460
560
560
ø 420
ø 510
ø 510
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 368/419
368368 S/STEEL FIXED HOSE REELS AISI 304
8434.350
8434.351
8434.352
8534.350
8534.351
8534.352
8544.350
8544.351
8564.350
8564.351
8564.352
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
without hose
3/8” hygieninc
3/8” hygieninc
without hose
3/8” hygieninc
3/8” hygieninc
without hose
3/8” hygieninc
without hose
3/8” hygieninc
3/8” hygieninc
/
12m (985.912)
18m (985.918)
/
20m (985.920)
25m (985.925)
/
30m (985.930)
/
40m (985.940)
50m (985.950)
Hose reel with hoses in syntheticrubber with blue hygienic coveringand AISI 304 fittings- AISI 304 stainless steel swivel joint- ”teflon” seals
Water up to 130° C 400 bar
S. 430
S. 530
S. 540
S. 560
1
OVERALL DIMENSIONS
H
F G
E
A
D C
B
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
No. 1 packing m 3 0,200 from kg 30 to 80
Article
Hose
length Hose ø
Connection
inlet outlet
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
A B C D E F G H
S. 430
S. 530
S. 540
S. 560
Art.
186
203
300
488
140
153
218
399
196
220
228
238
226
258
268
272
115
115
190
368
460
550
550
522
ø 420
ø 510
ø 510
ø 510
460
560
573
578
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 369/419
369369S/STEEL SWIVELLING HOSE REELS AISI 304
Water up to 130° C 400 bar
8424.350
8424.351
8424.352
8524.350
8524.351
8524.352
8554.350
8554.351
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
F 3/8”G
F 1/2”G
F 3/8”G
without hose
3/8” hygieninc
3/8” hygieninc
without hose
3/8” hygieninc
3/8” hygieninc
without hose
3/8” hygieninc
/
12m (985.912)
18m (985.918)
/
20m (985.920)
25m (985.925)
/
30m (985.930)
Hose reel with hoses in syntheticrubber with blue hygienic coveringand AISI 304 fittings- AISI 304 stainless steel swivel joint- ”teflon” seals
S. 420
S. 520
S. 550
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
Adjustable support for hose reel S.540*
*
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
Article
Hose
length Hose ø
Connection
inlet outlet
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
A B C D E F G H
S. 420
S. 520
S. 550
Art.
208
228
300
162
182
218
118
154
226
164
200
268
115
115
190
460
560
560
ø 420
ø 510
ø 510
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 370/419
370370 PAINTED FIXED HOSE REELS
8390.400
8390.401
8390.402
8430.400
8430.401
8430.402
8530.400
8530.4018530.402
8540.400
8540.401
8540.402
8540.403
8540.405
8540.406
8560.400
8560.401
8560.403
8560.404
8560.405
8560.406
8560.407
8560.408
8560.409
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”GF 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 3/8”-1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”GM 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
without hose
3/8”
3/8”
without hose
1/2”
1/2”
without hose
1/2”1/2”
without hose
3/4”
3/4”
1”
without hose
1/2”
without hose
3/4”
3/4”
1”
1”
without hose
1/2”
1/2”
1/2”
/
12m (995.312)
17m (995.317)
/
10m (996.310)
15m (996.315)
/
20m (996.320)25m (996.325)
/
15m (997.515)
20m (997.520)
15m (998.515)
/
30m (996.330)
/
30m (997.530)
40m (997.540)
20m (998.520)
30m (998.530)
/
40m (996.340)
50m (996.350)
60m (996.360)
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- carbon steel swivel joint- ”polyurethane” seals
Oil and similar 150 bar
S. 390
S. 430
S. 530
S. 540
S. 560
The same models, swivelling version, on page 372
1
OVERALL DIMENSIONS
H
F G
E
A
D C
B
No. 1 packing m 3 0,050 from kg 11 to 18
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
No. 1 packing m 3 0,200 from kg 30 to 80
Article Hose
length Hose ø
Connection
inlet outlet
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
A B C D E F G HS. 390
S. 430
S. 530
S. 540
S. 560
Art.186
186
203
300
488
140
140
153
218
399
196
196
220
228
238
226
226
258
268
272
110
115
115
190
368
400
460
550
550
522
ø 390
ø 420
ø 510
ø 510
ø 510
410
460
560
573
578
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 371/419
371371STAINLESS STEEL FIXED HOSE REELS
8392.200
8392.401
8392.402
8434.200
8432.401
8432.402
8534.200
8532.4018532.402
8544.200
8542.401
8542.402
8542.403
8544.205
8542.406
8564.200
8562.401
8562.403
8562.404
8562.405
8564.206
8562.407
8562.408
8562.409
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”GF 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 3/8”-1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”GM 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
F 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
without hose
3/8”
3/8”
without hose
1/2”
1/2”
without hose
1/2”1/2”
without hose
3/4”
3/4”
1”
without hose
1/2”
without hose
3/4”
3/4”
1”
1”
without hose
1/2”
1/2”
1/2”
/
12m (995.312)
17m (995.317)
/
10m (996.310)
15m (996.315)
/
20m (996.320)25m (996.325)
/
15m (997.515)
20m (997.520)
15m (998.515)
/
30m (996.330)
/
30m (997.530)
40m (997.540)
20m (998.520)
30m (998.530)
/
40m (996.340)
50m (996.350)
60m (996.360)
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- AISI 304 stainless steel swivel joint- ”viton” seals
Oil and similar 150 bar
S. 390
S. 430
S. 530
S. 540
S. 560
The same models, swivelling version, on page 373
1
OVERALL DIMENSIONS
H
F G
E
A
D C
B
No. 1 packing m 3 0,050 from kg 11 to 18
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
No. 1 packing m 3 0,200 from kg 30 to 80
Article Hose
length Hose ø Connection
inlet outlet
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
A B C D E F G HS. 390
S. 430
S. 530
S. 540
S. 560
Art.186
186
203
300
488
140
140
153
218
399
196
196
220
228
238
226
226
258
268
272
110
115
115
190
368
400
460
550
550
522
ø 390
ø 420
ø 510
ø 510
ø 510
410
460
560
573
578
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 372/419
372372 PAINTED SWIVELLING HOSE REELS
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 3/8”-1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
without hose
3/8”
3/8”
without hose
1/2”
1/2”
without hose
1/2”
1/2”
without hose
3/4”
3/4”
1”
without hose
1/2”
/
12m (995.312)
17m (995.317)
/
10m (996.310)
15m (996.315)
/
20m (996.320)
25m (996.325)
/
15m (997.515)
20m (997.520)
15m (998.515)
/
30m (996.330)
8380.400
8380.401
8380.402
8420.400
8420.401
8420.402
8520.400
8520.401
8520.402
8550.400
8550.401
8550.402
8550.403
8550.405
8550.406
*
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- carbon steel swivel joint- ”polyurethane” seals
Oil and similar 150 bar
S. 380
S. 420
S. 520
S. 550
The same models, fixed version, on page 370
Adjustable support for hose reel S.540*
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
No. 1 packing m 3 0,050 from kg 12 to 19
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
Article Hose
length Hose ø
Connection
inlet outlet
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
A B C D E F G H
S. 380
S. 420
S. 520
S. 550
Art.
184
208
228
300
146
162
182
218
106
118
154
226
144
164
200
268
110
115
115
190
400
460
560
560
ø 390
ø 420
ø 510
ø 510
484
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 373/419
373373STAINLESS STEEL SWIVELLING HOSE REELS
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
F 1/2”G
F 3/8”-1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 3/4”G
M 3/4”G
M 1”G
F 1/2”G
M 1/2”G
without hose
3/8”
3/8”
without hose
1/2”
1/2”
without hose
1/2”
1/2”
without hose
3/4”
3/4”
1”
without hose
1/2”
/
12m (995.312)
17m (995.317)
/
10m (996.310)
15m (996.315)
/
20m (996.320)
25m (996.325)
/
15m (997.515)
20m (997.520)
15m (998.515)
/
30m (996.330)
8382.200
8382.401
8382.402
8424.200
8422.401
8422.402
8524.200
8522.401
8522.402
8554.200
8552.401
8552.402
8552.403
8554.205
8552.406
*
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- AISI 304 stainless steel swivel joint- ”viton” seals
Oil and similar 150 bar
S. 380
S. 420
S. 520
S. 550
The same models, fixed version, on page 371
Adjustable support for hose reel S.540*
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
No. 1 packing m 3 0,050 from kg 12 to 19
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
Article Hose
length Hose ø
Connection
inlet outlet
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
A B C D E F G H
S. 380
S. 420
S. 520
S. 550
Art.
184
208
228
300
146
162
182
218
106
118
154
226
144
164
200
268
110
115
115
190
400
460
560
560
ø 390
ø 420
ø 510
ø 510
484
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 374/419
374374 ENCLOSED HOSE REELS
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1/2”G
M 1/2”G
M 1/2”G
without hose
1/2”
1/2”
without hose
1/2”
1/2”
/
10m (996.310)
15m (996.315)
/
10m (996.310)
15m (996.315)
8450.400
8450.401
8450.402
8440.400
8440.401
8440.402
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- carbon steel swivel joint- ”polyurethane” seals
Oil and similar 150 bar
140
500
485
217
4 8 5
2 3 6
217
2 3 6
177
1 8 0
140
564
485
4 8 5
1 6 4
162
208
1 6 4
208
1 1 8
S. 450
S. 440
FIXED
SWIVELLING
OVERALL DIMENSIONS
OVERALL DIMENSIONS
1
-55
+550°
No. 1 packing m 3 0,085 from kg 21 to 29
No. 1 packing m 3 0,085 from kg 22 to 30
Article
Hose
length Hose ø
Connection
inlet outlet
The fixed hose reel installation systemcan be easily modified according to needs(see instructions on page 396).
The swivelling hose reel installat ion system can be easily modified accordingto needs (see instructions on page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 375/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 376/419
376376 HYDRAULIC MOTOR-OPERATED HOSE REELS
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
without hose
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
without hose
1/2”
1/2”
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
/
30m (996.330)
40m (996.340)
50m (996.350)
15m (997.515)
20m (997.520)
30m (997.530)
15m (998.515)
20m (998.520)
/
60m (996.360)
70m (996.370)
80m (996.380)
90m (996.390)
100m (996.3100)
40m (997.540)
50m (997.550)
60m (997.560)
30m (998.530)
40m (998.540)
8617.400
8617.401
8617.402
8617.403
8617.404
8617.405
8617.406
8617.407
8617.408
8637.400
8637.401
8637.402
8637.403
8637.404
8637.405
8637.406
8637.407
8637.408
8637.409
8637.410
A
C
B
D E F
G
H
I
L
M
S. 637
S. 617
Oil and similar 150 bar
OVERALL DIMENSIONS
Hose reel with rewinding by hydraulicmotor, hoses in black synthetic rubberand galvanised steel fittings- carbon steel swivel joint- “polyurethane” seals
No. 1 packing m 3 0,270 from kg 55 to 74
No. 1 packing m 3 0,370 from kg 75 to 118
Article Hose
length Hose ø
The hydraulic motor-operated hose reels are designed for
applications requiring very sturdy equipment, with a powerful
rewinding system.
Their specific qualities enable the use of large diameter hoses for
rapid transfer with high deliveries.
Note: For detailed hose reel fixing instructions refer to page 398
Connection
inlet outlet
283
467
185
370
140
140
130
130
310
310
360
360
220
400
463
649
692
692
570
570
621
621
S. 617
S. 637
Art. A B C D E F G H I L M
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 377/419
377377 AIR MOTOR-OPERATED HOSE REELS
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
without hose
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
without hose
1/2”
1/2”
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
/
30m (996.330)
40m (996.340)
50m (996.350)
15m (997.515)
20m (997.520)
30m (997.530)
15m (998.515)
20m (998.520)
/
60m (996.360)
70m (996.370)
80m (996.380)
90m (996.390)
100m (996.3100)
40m (997.540)
50m (997.550)
60m (997.560)
30m (998.530)
40m (998.540)
8618.400
8618.401
8618.402
8618.403
8618.404
8618.405
8618.406
8618.407
8618.408
8638.400
8638.401
8638.402
8638.403
8638.404
8638.405
8638.406
8638.407
8638.408
8638.409
8638.410
A
B
C
G
D F E
H
M
L
I
S. 638
S. 618
Oil and similar 150 bar
OVERALL DIMENSIONS
Hose reel with rewinding by air motor,hoses in black synthetic rubber andgalvanised steel fittings- carbon steel swivel joint- “polyurethane” seals
No. 1 packing m 3 0,270 from kg 51 to 78
No. 1 packing m 3 0,370 from kg 71 to 122
Article Hose
length Hose ø
Connection
inlet outlet
The air motor-operated hose reels are designed for
applications requiring very sturdy equipment, with a powerful
rewinding system.
Their specific qualities enable the use of large diameter hoses for
rapid transfer with high deliveries.
Note: For detailed hose reel fixing instructions refer to page 398
A B C D E F G H I L M
283
467
185
370
140
140
130
130
310
310
360
360
220
400
555
740
692
692
570
570
621
621
S. 618
S. 638
Art.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 378/419
378378 PAINTED FIXED HOSE REELS
8390.500
8390.501
8390.502
8430.500
8430.501
8430.502
8430.505
8430.506
8530.500
8530.501
8530.502
8540.500
8540.501
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
M 1/4”G
M 1/4”G
F 1/2”G
M 1/4”G
M 1/4”G
M 1/4”G
M 1/4”G
F 1/2”G
M 1/4”G
M 1/4”G
F 1/2”G
M 1/4”G
without hose
1/4”
1/4”
without hose
1/4”
1/4”
3/8”
3/8”
without hose
3/8”
3/8”
without hose
3/8”
/
12m (993.511)
16m (993.516)
/
12m (993.512)
18m (993.518)
10m (995.710)
15m (995.715)
/
20m (995.720)
25m (995.725)
/
30m (995.730)
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- carbon steel swivel joint- ”polyurethane” seals
Grease 600 bar
Per avere gli stessi modelli, ma orientabili vedi pag. XX
S. 390
S. 430
S. 530
S. 540
The same models, swivelling version, on page 380
1
OVERALL DIMENSIONS
H
F G
E
A
D C
B
No. 1 packing m 3 0,050 from kg 11 to 18
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
Article
Hose
length Hose ø
Connection
inlet outlet
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
A B C D E F G H
S. 390
S. 430
S. 530
S. 540
Art.
186
186
203
300
140
140
153
218
196
196
220
228
226
226
258
268
110
115
115
190
400
460
550
550
ø 390
ø 420
ø 510
ø 510
410
460
560
573
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 379/419
379379STAINLESS STEEL FIXED HOSE REELS
8392.500
8392.501
8392.502
8432.500
8432.501
8432.502
8432.505
8432.506
8532.500
8532.501
8532.502
8542.500
8542.501
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
M 1/4”G
M 1/4”G
F 1/2”G
M 1/4”G
M 1/4”G
M 1/4”G
M 1/4”G
F 1/2”G
M 1/4”G
M 1/4”G
F 1/2”G
M 1/4”G
without hose
1/4”
1/4”
without hose
1/4”
1/4”
3/8”
3/8”
without hose
3/8”
3/8”
without hose
3/8”
/
12m (993.511)
16m (993.516)
/
12m (993.512)
18m (993.518)
10m (995.710)
15m (995.715)
/
20m (995.720)
25m (995.725)
/
30m (995.730)
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- carbon steel swivel joint- ”polyurethane” seals
Grease 600 bar
Per avere gli stessi modelli, ma orientabili vedi pag. XX
S. 390
S. 430
S. 530
S. 540
The same models, swivelling version, on page 380
1
OVERALL DIMENSIONS
H
F G
E
A
D C
B
No. 1 packing m 3 0,050 from kg 11 to 18
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
Article
Hose
length Hose ø
Connection
inlet outlet
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
A B C D E F G H
S. 390
S. 430
S. 530
S. 540
Art.
186
186
203
300
140
140
153
218
196
196
220
228
226
226
258
268
110
115
115
190
400
460
550
550
ø 390
ø 420
ø 510
ø 510
410
460
560
573
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 380/419
380380 PAINTED SWIVELLING HOSE REELS
H
F G
A
D C
B E
8380.500
8380.501
8380.502
8420.500
8420.501
8420.502
8420.505
8420.506
8520.500
8520.501
8520.502
8550.500
8550.501
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
M 1/4”G
M 1/4”G
F 1/2”G
M 1/4”G
M 1/4”G
M 1/4”G
M 1/4”G
F 1/2”G
M 1/4”G
M 1/4”G
F 1/2”G
M 1/4”G
without hose
1/4”
1/4”
without hose
1/4”
1/4”
3/8”
3/8”
without hose
3/8”
3/8”
without hose
3/8”
/
12m (993.511)
16m (993.516)
/
12m (993.512)
18m (993.518)
10m (995.710)
15m (995.715)
/
20m (995.720)
25m (995.725)
/
30m (995.730)
*
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- carbon steel swivel joint- ”polyurethane” seals
S. 380
S. 420
S. 520
S. 550
Grease 600 bar
The same models, fixed version, on page 378
Adjustable support for hose reel S.540*
-55
+550°
OVERALL DIMENSIONS
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,050 from kg 12 to 19
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
A B C D E F G H
S. 380
S. 420
S. 520
S. 550
Art.
184
208
228
300
146
162
182
218
106
118
154
226
144
164
200
268
110
115
115
190
400
460
560
560
ø 390
ø 420
ø 510
ø 510
484
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 381/419
381381STAINLESS STEEL SWIVELLING HOSE REELS
H
F G
A
D C
B E
8382.500
8382.501
8382.502
8422.500
8422.501
8422.502
8422.505
8422.506
8522.500
8522.501
8522.502
8552.500
8552.501
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
M 1/4”G
M 1/4”G
F 1/2”G
M 1/4”G
M 1/4”G
M 1/4”G
M 1/4”G
F 1/2”G
M 1/4”G
M 1/4”G
F 1/2”G
M 1/4”G
without hose
1/4”
1/4”
without hose
1/4”
1/4”
3/8”
3/8”
without hose
3/8”
3/8”
without hose
3/8”
/
12m (993.511)
16m (993.516)
/
12m (993.512)
18m (993.518)
10m (995.710)
15m (995.715)
/
20m (995.720)
25m (995.725)
/
30m (995.730)
*
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- carbon steel swivel joint- ”polyurethane” seals
S. 380
S. 420
S. 520
S. 550
Grease 600 bar
The same models, fixed version, on page 379
Adjustable support for hose reel S.540*
-55
+550°
OVERALL DIMENSIONS
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,050 from kg 12 to 19
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
A B C D E F G H
S. 380
S. 420
S. 520
S. 550
Art.
184
208
228
300
146
162
182
218
106
118
154
226
144
164
200
268
110
115
115
190
400
460
560
560
ø 390
ø 420
ø 510
ø 510
484
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 382/419
382382 ENCLOSED HOSE REELS
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 1/2”G
M 1/4”G
M 1/4”G
M 1/4”G
M 1/4”G
F 1/2”G
M 1/4”G
M 1/4”G
M 1/4”G
M 1/4”G
without hose
1/4”
1/4”
3/8”
3/8”
without hose
1/4”
1/4”
3/8”
3/8”
/
12m (993.512)
18m (993.518)
10m (995.710)
15m (995.715)
/
12m (993.512)
18m (993.518)
10m (995.710)
15m (995.715)
8450.500
8450.501
8450.502
8450.505
8450.506
8440.500
8440.501
8440.502
8440.505
8440.506
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- carbon steel swivel joint- ”polyurethane” seals
Grease 600 bar
140
500
485
217
4 8 5
2 3 6
217
2 3 6
177
1 8 0
140
564
485
4 8 5
1 6 4
162
208
1 6 4
208
1 1 8
S. 450
S. 440
FIXED
SWIVELLING
OVERALL DIMENSIONS
OVERALL DIMENSIONS
1
-55
+550°
Article
Hose
length Hose ø
Connection
inlet outlet
The fixed hose reel installation systemcan be easily modified according to needs(see instructions on page 396).
The swivelling hose reel installat ion system can be easily modified accordingto needs (see instructions on page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
No. 1 packing m 3 0,085 from kg 21 to 29
No. 1 packing m 3 0,085 from kg 22 to 30
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 383/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 384/419
384384 HYDRAULIC MOTOR-OPERATED HOSE REELS
A
C
B
D E F
G
H
I
L
M
F 1”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
without hose
1/2”
1/2”
1/2”
without hose
1/2”
1/2”
1/2”
1/2”
1/2”
/
30m (996.730)
40m (996.740)
50m (996.750)
/
60m (996.760)
70m (996.770)
80m (996.780)
90m (996.790)
100m (996.7100)
8617.500
8617.501
8617.502
8617.503
8637.500
8637.501
8637.502
8637.503
8637.504
8637.505
S. 617
S. 637
Grease 400 bar
OVERALL DIMENSIONS
Hose reel with rewinding by hydraulicmotor, hoses in black synthetic rubberand galvanised steel fittings- carbon steel swivel joint- “polyurethane” seals
Article
Hose
length Hose ø
Connection
inlet outlet
The hydraulic motor-operated hose reels are designed for
applications requiring very sturdy equipment, with a powerful
rewinding system.
Their specific qualities enable the use of large diameter hoses for
rapid transfer with high deliveries.
Note: For detailed hose reel fixing instructions refer to page 398
No. 1 packing m 3 0,270 from kg 55 to 86
No. 1 packing m 3 0,370 from kg 75 to 137
A B C D E F G H I L M
283
467
185
370
140
140
130
130
310
310
360
360
220
400
463
649
692
692
570
570
621
621
S. 617
S. 637
Art.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 385/419
385385 AIR MOTOR-OPERATED HOSE REELS
F 1”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1/2”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
F 1”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
M 1/2”G
without hose
1/2”
1/2”
1/2”
without hose
1/2”
1/2”
1/2”
1/2”
1/2”
/
30m (996.730)
40m (996.740)
50m (996.750)
/
60m (996.760)
70m (996.770)
80m (996.780)
90m (996.790)
100m (996.7100)
8618.500
8618.501
8618.502
8618.503
8638.500
8638.501
8638.502
8638.503
8638.504
8638.505
A
B
C
G
D F E
H
M
L
I
S. 618
S. 638
Grease 400 bar
OVERALL DIMENSIONS
Hose reel with rewinding by air motor,hoses in black synthetic rubber andgalvanised steel fittings- carbon steel swivel joint- “polyurethane” seals
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,270 from kg 51 to 82
No. 1 packing m 3 0,370 from kg 71 to 133
The air motor-operated hose reels are designed for
applications requiring very sturdy equipment, with a powerful
rewinding system.
Their specific qualities enable the use of large diameter hoses for
rapid transfer with high deliveries.
Note: For detailed hose reel fixing instructions refer to page 398
A B C D E F G H I L M
283
467
185
370
140
140
130
130
310
310
360
360
220
400
555
740
692
692
570
570
621
621
S. 618
S. 638
Art.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 386/419
386386 PAINTED FIXED HOSE REELS
8530.100
8530.601
8530.602
8540.1008540.601
8540.602
8540.603
8560.100
8560.601
8560.602
8560.603
8560.604
8560.605
F 1/2”G
F 1/2”G
F 1/2”G
F 1”GF 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1”GM 3/4”G
M 3/4”G
M 1”G
F 1”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
without hose
1/2”
1/2”
without hose3/4”
3/4”
1”
without hose
3/4”
3/4”
3/4”
1”
1”
/
20m (996.820)
25m (996.825)
/ 15m (997.815)
20m (997.820)
15m (998.815)
/
30m (997.830)
35m (997.835)
40m (997.840)
20m (998.820)
30m (998.830)
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- brass swivel joint- ”viton” seals
S. 530
S. 540
S. 560
Diesel oil 10 bar
1
OVERALL DIMENSIONS
H
F G
E
A
D C
B
Article Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
No. 1 packing m 3 0,200 from kg 30 to 80
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
A B C D E F G H
S. 530
S. 540
S. 560
Art.
203
300
488
153
218
399
220
228
238
258
268
272
115
190
368
550
550
522
ø 510
ø 510
ø 510
560
573
578
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 387/419
387387STAINLESS STEEL FIXED HOSE REELS
8532.100
8532.601
8532.602
8542.1008542.601
8542.602
8542.603
8562.100
8562.601
8562.602
8562.603
8562.604
8562.605
F 1/2”G
F 1/2”G
F 1/2”G
F 1”GF 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1/2”G
M 1/2”G
M 1/2”G
F 1”GM 3/4”G
M 3/4”G
M 1”G
F 1”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
without hose
1/2”
1/2”
without hose3/4”
3/4”
1”
without hose
3/4”
3/4”
3/4”
1”
1”
/
20m (996.820)
25m (996.825)
/ 15m (997.815)
20m (997.820)
15m (998.815)
/
30m (997.830)
35m (997.835)
40m (997.840)
20m (998.820)
30m (998.830)
Hose reel with hoses in black syntheticrubber and galvanised steel fittings
- brass swivel joint- ”viton” seals
S. 530
S. 540
S. 560
Diesel oil 10 bar
1
OVERALL DIMENSIONS
H
F G
E
A
D C
B
Article
Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
No. 1 packing m 3 0,200 from kg 30 to 80
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
A B C D E F G H
S. 530
S. 540
S. 560
Art.
203
300
488
153
218
399
220
228
238
258
268
272
115
190
368
550
550
522
ø 510
ø 510
ø 510
560
573
578
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 388/419
388388 HYDRAULIC MOTOR-OPERATED HOSE REELS
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
F 1.1/2”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
M 1.1/4”G
M 1.1/2”G
F 1.1/2”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
M 1.1/4”G
M 1.1/4”G
M 1.1/4”G
M 1.1/2”G
M 1.1/2”G
without hose
3/4”
3/4”
3/4”
1”
1”
1.1/4”
1.1/2”
without hose
3/4”
3/4”
3/4”
1”
1”
1.1/4”
1.1/4”
1.1/4”
1.1/2”
1.1/2”
/
15m (997.815)
20m (997.820)
30m (997.830)
15m (998.815)
20m (998.820)
15m (9910.315)
10m (9911.310)
/
40m (997.840)
50m (997.850)
60m (997.860)
30m (998.830)
40m (998.840)
20m (9910.320)
25m (9910.325)
30m (9910.330)
15m (9911.315)
20m (9911.320)
8617.600
8617.601
8617.602
8617.603
8617.604
8617.605
8617.606
8617.607
8637.600
8637.601
8637.602
8637.603
8637.604
8637.605
8637.606
8637.607
8637.608
8637.609
8637.610
Diesel oil 10 bar
S. 617
S. 637
OVERALL DIMENSIONS
A
C
B
D E F
G
H
I
L
M
Hose reel with rewinding by hydraulicmotor, hoses in black synthetic rubberand galvanised steel fittings- carbon steel swivel joint- “viton” seals
Article
Hose
length Hose ø
Connection
inlet outlet
The hydraulic motor-operated hose reels are designed for
applications requiring very sturdy equipment, with a powerful
rewinding system.
Their specific qualities enable the use of large diameter hoses for
rapid transfer with high deliveries.
Note: For detailed hose reel fixing instructions refer to page 398
No. 1 packing m 3 0,270 from kg 55 to 86
No. 1 packing m 3 0,370 from kg 75 to 114
A B C D E F G H I L M
283
467
185
370
140
140
130
130
310
310
360
360
220
400
492
677
692
692
570
570
621
621
S. 617
S. 637
Art.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 389/419
389389 AIR MOTOR-OPERATED HOSE REELS
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
F 1”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
F 1”G
M 3/4”G
M 3/4”G
M 3/4”G
M 1”G
M 1”G
without hose
3/4”
3/4”
3/4”
1”
1”
without hose
3/4”
3/4”
3/4”
1”
1”
/
15 m (997.815)
20 m (997.820)
30 m (997.830)
15 m (998.815)
20 m (998.820)
/
40m (997.840)
50m (997.850)
60m (997.860)
30m (998.830)
40m (998.840)
8618.100
8618.601
8618.602
8618.603
8618.604
8618.605
8638.100
8638.601
8638.602
8638.603
8638.604
8638.605
A
B
C
G
D F E
H
M
L
I
S. 618
S. 638
OVERALL DIMENSIONS
Diesel oil 10 bar
Hose reel with rewinding by air motor,hoses in black synthetic rubber andgalvanised steel fittings- brass swivel joint- ”viton” seals
Article Hose
length Hose ø
Connection
inlet outlet
The air motor-operated hose reels are designed for
applications requiring very sturdy equipment, with a powerful
rewinding system.
Their specific qualities enable the use of large diameter hoses for
rapid transfer with high deliveries.
Note: For detailed hose reel fixing instructions refer to page 398
No. 1 packing m 3 0,370 from kg 71 to 133
No. 1 packing m 3 0,270 from kg 51 to 82
A B C D E F G H I L M
283
467
185
370
140
140
130
130
310
310
360
360
220
400
555
740
692
692
570
570
621
621
S. 618
S. 638
Art.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 390/419
390390 PAINTED FIXED HOSE REELS
8430.700
8430.701
8430.702
8530.7008530.701
8530.702
8530.703
8530.704
8530.705
8540.700
8540.701
8540.702
8540.703
8540.704
8540.705
8540.706
8540.707
8540.708
8540.709
M 3/8”G
F 3/8”G
F 3/8”G
M 3/8”GF 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
M 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
M 3/8”G
F 3/8”G
F 3/8”G
M 3/8”GF 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
M 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
without hose
2x1/4”-2x6
2x5/16”-2x8
without hose2x1/4”-2x6
2x1/4”-2x6
2x5/16”-2x8
2x5/16”-2x8
2x3/8”-2x9
without hose
2x1/4”-2x6
2x1/4”-2x6
2x1/4”-2x6
2x5/16”-2x8
2x5/16”-2x8
2x5/16”-2x8
2x3/8”-2x9
2x3/8”-2x9
2x3/8”-2x9
/
13m (973.913)
12m (974.912)
/ 17m (973.917)
20m (973.920)
15m (974.915)
20m (974.920)
15m (975.915)
/
25m (973.925)
30m (973.930)
35m (973.935)
25m (974.925)
30m (974.930)
35m (974.935)
20m (975.920)
25m (975.925)
27m (975.927)
Hose reel with double hose StandardEN559, hoses in SBR/EPDM rubberand brass fittings.- brass swivel joint- ”viton” seals
S. 430
S. 530
S. 540
Welding 20 bar
Complying with
standard
Atex 94/9
1
OVERALL DIMENSIONS
H
F G
E
A
D C
B
Article Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
A B C D E F G H
S. 430
S. 530
S. 540
Art.
186
203
300
140
153
218
196
220
228
226
258
268
115
115
190
460
550
550
ø 420
ø 510
ø 510
460
560
573
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 391/419
391391PAINTED SWIVELLING HOSE REELS
8420.700
8420.701
8420.702
8520.7008520.701
8520.702
8520.703
8520.704
8520.705
8550.700
8550.701
8550.702
8550.703
8550.704
8550.705
8550.706
8550.707
8550.708
8550.709
M 3/8”G
F 3/8”G
F 3/8”G
M 3/8”GF 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
M 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
M 3/8”G
F 3/8”G
F 3/8”G
M 3/8”GF 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
M 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
F 3/8”G
without hose
2x1/4”-2x6
2x5/16”-2x8
without hose2x1/4”-2x6
2x1/4”-2x6
2x5/16”-2x8
2x5/16”-2x8
2x3/8”-2x9
without hose
2x1/4”-2x6
2x1/4”-2x6
2x1/4”-2x6
2x5/16”-2x8
2x5/16”-2x8
2x5/16”-2x8
2x3/8”-2x9
2x3/8”-2x9
2x3/8”-2x9
/
13m (973.913)
12m (974.912)
/ 17m (973.917)
20m (973.920)
15m (974.915)
20m (974.920)
15m (975.915)
/
25m (973.925)
30m (973.930)
35m (973.935)
25m (974.925)
30m (974.930)
35m (974.935)
20m (975.920)
25m (975.925)
27m (975.927)
*
Hose reel with double hose StandardEN559, hoses in SBR/EPDM rubberand brass fittings.- brass swivel joint- ”viton” seals
S. 420
S. 520
S. 550
Welding 20 bar
Adjustable support for hose reel S.540*
Complying with
standard
Atex 94/9
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
Article Hose
length Hose ø
Connection
inlet outlet
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
A B C D E F G H
S. 420
S. 520
S. 520
Art.
208
228
300
162
182
218
118
154
226
164
200
268
115
115
190
460
560
560
ø 420
ø 510
ø 510
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 392/419
392392 PAINTED FIXED HOSE REELS
8430.800
8430.801
8430.802
8430.803
8430.804
8530.8008530.801
8530.802
8530.803
8530.804
8540.800
8540.801
8540.802
M 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
M 3/8”G-SxF 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
M 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
M 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
M 3/8”G-SxF 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
M 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
without hose
8x15
8x15
10x17
10x17
without hose8x15
8x15
10x17
10x17
without hose
8x15
10x17
/
15m (974.1015)
20m (974.1020)
12m (975.1012)
18m (975.1018)
/ 24m (974.1024)
28m (974.1028)
22m (975.1022)
27m (975.1027)
/
30m (974.1030)
30m (975.1030)
Complying with
standard
Atex 94/9
Hose reel with orange hose StandardEN559 and brass fittings.
- brass swivel joint- ”viton” seals
S. 430
S. 530
S. 540
LPG and natural gas 20 bar
OVERALL DIMENSIONS
1
H
F G
E
A
D C
B
Article Hose
length Hose ø
Connection
inlet outlet
The ad justab le arms can be easily reposi tioned accord ing to needs (see page 396).
The quick coupling support (see page 394)that facilitates installation in battery is available by request.
The template supplied, facilitates drillingof the holes and therefore hose reel fixing.
No. 1 packing m 3 0,065 from kg 14 to 24
No. 1 packing m 3 0,065 from kg 19 to 42
No. 1 packing m 3 0,120 from kg 24 to 40
A B C D E F G H
S. 430
S. 530
S. 540
Art.
186
203
300
140
153
218
196
220
228
226
258
268
115
115
190
460
550
550
ø 420
ø 510
ø 510
460
560
573
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 393/419
393393PAINTED SWIVELLING HOSE REELS
8420.800
8420.801
8420.802
8420.803
8420.804
8520.8008520.801
8520.802
8520.803
8520.804
8550.800
8550.801
8550.802
M 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
M 3/8”G-SxF 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
M 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
M 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
M 3/8”G-SxF 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
M 3/8”G-Sx
F 3/8”G-Sx
F 3/8”G-Sx
without hose
8x15
8x15
10x17
10x17
without hose8x15
8x15
10x17
10x17
without hose
8x15
10x17
/
15m (974.1015)
20m (974.1020)
12m (975.1012)
18m (975.1018)
/ 24m (974.1024)
28m (974.1028)
22m (975.1022)
27m (975.1027)
/
30m (974.1030)
30m (975.1030)
*
Complying with
standard
Atex 94/9
Hose reel with orange hose StandardEN559 and brass fittings.
- brass swivel joint- ”viton” seals
S. 420
S. 520
S. 550
LPG and natural gas 20 bar
Adjustable support for hose reel S.540*
-55
+550°
OVERALL DIMENSIONS
H
F G
A
D C
B E
Article
Hose
length Hose ø
Connection
inlet outlet
The adjustable arms can be easily repositioned accord ing to needs (see page 396).
The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping withtwo screws.
No. 1 packing m 3 0,065 from kg 15 to 25
No. 1 packing m 3 0,065 from kg 20 to 43
No. 1 packing m 3 0,120 from kg 25 to 41
A B C D E F G H
S. 420
S. 520
S. 550
Art.
208
228
300
162
182
218
118
154
226
164
200
268
115
115
190
460
560
560
ø 420
ø 510
ø 510
541
642
702
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 394/419
SUPPORTS FOR FIXED HOSE REELS394394
300
3 4 0
3 0 0
220
488
399
3 1 3
3 4 7
186
2 9 4
2 6 4
152
217
2 9 2
2 6 7
187
203
3 0 2
3 3 8
160
Art. 843002
Art. 843001
Art. 845001
Art. 853001
Art. 853002
Art. 854001
Art. 854002
Art. 856001
Art. 856002
QUICK FIT WALL BRACKETS SUPPLIED ON REQUEST
13
4
2
Art. 843002
Fixed support in AISI 304 stainless steel
for fixed hose reels in stainless steel and Aisi 304stainless steel series 390 - 430
Art. 843001
Fixed support in steel
for fixed hose reels in painted steel series 390 - 430
Art. 845001
Fixed support in steel
for fixed enclosed hose reels in painted steelseries 450
Art. 853001
Fixed support in steel
for fixed hose reels in painted steel series 530
Art. 853002
Fixed support in AISI 304 stainless steel
for fixed hose reels in stainless steel and Aisi 304stainless steel series 530
Art. 854001
Fixed support in steel
for fixed hose reels in painted steel series 540
Art. 854002
Fixed support in AISI 304 stainless steel
for fixed hose reels in stainless steel and Aisi 304
stainless steel series 540
Art. 856002
Fixed support in AISI 304 stainless steel
for fixed hose reels in stainless steel and Aisi304 stainless steel series 560
Art. 856001
Fixed support in steel
for fixed hose reels in painted steel series 560
The quick coupling support that facilitates hooking of the single hose reel and optimises its installation in battery (i.e. with several hose reels
side by side) is available by request (see instructions on page 397).
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 395/419
ADJUSTABLE SUPPORTS FOR FIXED HOSE REELS 395395
QUICK FIT SWIVEL BRACKETS SUPPLIED ON REQUEST
162
208
1 1 8
1 6 5
94
129
162
208
1 1 8
1 6 5
162
208
1 1 8
1 6 5
94
94
218
300
2 2 6
2 6 8
Art. 843005
Art. 843006
Art. 845005
Art. 853005
Art. 853006
Art. 854005
Art. 854006
1
2
3
4
Art. 845005
Adjustable support in steelfor fixed enclosed hose reels in painted
steel series 450
Art. 853005
Adjustable support in steelfor fixed hose reels in painted steel
series 530 Art. 853006
Adjustable support in AISI 304 stainless steelfor fixed hose reels in stainless steel and Aisi 304stainless steel series 530
Art. 854005
Adjustable support in steelfor fixed hose reels in painted steel
series 540
Art. 854006
Adjustable support in AISI 304 stainless steelfor fixed hose reels in stainless steel and Aisi 304stainless steel series 540
Art. 843005
Adjustable support in steelfor fixed hose reels in painted steel
series 390 - 430
Art. 843006
Adjustable support in AISI 304 stainless steelfor fixed hose reels in stainless steel and Aisi 304stainless steel series 390 - 430
The quick coupling adjustable support facilitates hose reel installation and enables 40° rotation to the right or left or
locking in fixed positioned at 0° by means of clamping with two screws is available by request.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 396/419
396396 HOSE REEL INSTALLATION
The hose reels are supplied with adjustable arms fitted as shown in the photo.The same arms can be easily repositioned as required.
Wall installation with hose downwards.
From the standard position turn the arms upwards,then turn the hose reelupside-down (see figure).Ideal for use ofswivelling hose reels.
Wall installation withhose downwards.Ideal for use withdrip-catcher tray.
Wall installation with horizontalhose position.
Ideal for fixing atmedium/low heights.
Bench installation
Ceiling installation
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 397/419
INSTALLATION IN BATTERY 397397
Series 390 - 430
Series 560
Series 530
186 186
20
203 203
20
300 3000
488 4880
Series 540
Art. 88650
Art. 88651
ACCESSORIES FOR HOSE REEL
Art. 88651
Latch mechanism protective coverrack side for hose reelsseries 520 - 530 - 540 - 550 - 560
Art. 88650Latch mechanism protective coverrack side for hose reels series 420 - 430
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 398/419
398398 MOTOR-OPERATED HOSE REELS
INSTALLATION OF HYDRAULIC MOTOR AND AIR MOTOR-OPERATED HOSE REELS
WALL MOUNTING OF HYDRAULIC AND AIR MOTOR-OPERATED HOSE REELS
Fig. 1 Fig. 2 Fig. 3
The hose reel is normally supplied with the arms in the position of Fig. 1 suitable for bench or wall application. To enable wallapplication with a different position of the arms or ceiling mounting, the following modifications must be carried out from thestarting position:- to change to the position in Fig. 2 turn the arms 180° and turn the hose reel upside-down.- to change to the position in Fig. 3 turn the arms 90°.
After choosing the ideal position, checking the consistency and thickness of the wall, marking the holes for the plugs (seetemplate supplied with the hose reel) and making sure they do not interfere with hydraulic pipes or electrical wires, proceed withdrilling. Fix the plugs in the wall and insert the hose reel in the special seats. Tighten the 4 fixing nuts.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 399/419
HYDRAULIC OR AIR MOTOR-OPERATED HOSE REELS 399399
FITTING OF HOSE ON HYDRAULIC MOTOR-OPERATED HOSE REELS WITH 1.1/2” CONNECTOR
FITTING OF HOSE ON HYDRAULIC OR AIR MOTOR-OPERATED HOSE REELS WITH 1” CONNECTOR
HYDRAULIC AND AIR MOTOR-OPERATED HOSE REEL FEED
F
N
G
F
GN
G
Before carrying out the operation, make sure the hose reel drum is locked by means of the parking brake F
- screw one Nipple N on the outlet elbow G-apply the hose on Nipple N
Before carrying out the operation, make sure the hose reel drum is locked by means of theparking brake F
- remove the outlet elbow G- screw one Nipple N on the outlet elbow G- apply the hose on Nipple N
- refit the outlet elbow G with the assembled parts
The hydraulic motor-operated hose reels are fed, bymeans of a control, by an electric control unit (control andcontrol unit not supplied)
The air motor-operated hose reels are fed, by means of acontrol, with direct connection to the compressed airsystem (control not supplied)
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 400/419
HOSE STOP400400
Comes with all hose reels supplied without hose, complete with adapters for using hoses of different diameter.
UNIVERSAL HOSE STOP
Adapters for hoses of different diameter(Supplied with the hose stop)
KR7101
KR7201
KR8102
KR8104
KR8807
KR8411
KR8811
KR8508
KR8907
painted
stainless steel
painted
stainless steel
painted
painted
stainless steel
stainless steel
painted
Article Series
390
390
430
450
530
430
450
530
540 outlet 1”
540 outlet 1/2”
540 outlet 1”
540 outlet 1/2”
430 welding
530 welding
540 welding
380
380
420
440
520
420
440
520
550 outlet 1”
550 outlet 1/2”
550 outlet 3/4”
550 outlet 1/2”
420 welding
520 welding
550 welding
430 GAS
530 GAS
540 GAS
420 GAS
520 GAS
550 GAS
ø Reductions
560 outlet 1”
560 outlet 1/2”
560 outlet 1”
560 outlet 1/2”
12 - 14 - 16 mm
12 - 14 - 16 mm
14 - 17 - 19 mm
14 - 17 - 19 mm
25 - 34,5 mm
19 mm
25 - 34,5 mm
19 mm
12 - 14 - 15 - 16 mm
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 401/419
HOSE REEL CAPACITY 401401
ø 15 mm max. 20 m
ø 17 mm max. 18 m
Series 520Series 530
Series 540
Series 550
ø 1/4” X 1/4” max. 13 m
ø 5/16” X 5/16” max. 12 m
ø 3/8” X 3/8” max. 10 m
Series 380
Series 390
Series 420
Series 430
Series 440
Series 450
To establish the capacity of a hose reel (max. length of hose to be wound) it is necessary to know the followingdata:- hose reel spring rewinding capacity- external diameter of hose to be used
ø 1/4” X 1/4” max. 22 m
ø 5/16” X 5/16” max. 20 m
ø 3/8” X 3/8” max. 15 m
ø 1/4” X 1/4” max. 37 m
ø 5/16” X 5/16” max. 35 m
ø 3/8” X 3/8” max. 27 m
ø 15 mm max. 28 m
ø 17 mm max. 27 m
INDUSTRIAL SERIES (open and enclosed)
INDUSTRIAL SERIES WITH DOUBLE HOSE FOR WELDING
INDUSTRIAL SERIES FOR GAS
Series8617.600
outlet 1.1/2”
ø 3/4” max. 30 mø 1” max. 20 m
ø 1.1/4” max. 15 m
ø 1.1/2” max. 10 m
INDUSTRIAL MOTOR-OPERATED SERIES
Series8637.600
outlet 1.1/2”
ø 1/2” max. 100 m
ø 3/4” max. 60 m
ø 1” max. 40 m
ø 3/4” max. 60 mø 1” max. 40 m
ø 1.1/4” max. 30 m
ø 1.1/2” max. 20 m
Series 420
Series 430
Series 520
Series 530
ø 12 mm max. 22 m
ø 14 mm max. 20 m
ø 16 mm max. 18 m
ø 17 mm max. 21 m
ø 19,5 mm max. 16 m
ø 22 mm max. 14 m
ø 22 mm max. 30 m
ø 28 mm max. 22 m
ø 34 mm max. 17 m
Series 540-550outlet 1”
Series 540
Series 550
ø 1/2” max. 50 m
ø 3/4” max. 30 m
ø 1” max. 20 m
Series 617
Series 618
outlet 1”
Series 637
Series 638
outlet 1”
Series 420
Series 430
Series 560outlet 1”
ø 22 mm max. 60 m
ø 30 mm max. 40 m
ø 35 mm max. 30 m
Series 520
Series 530
ø 18,5 mm max. 28 m
ø 20 mm max. 26 m
ø 22 mm max. 24 m
ø 15 mm max. 30 m
ø 17 mm max. 30 m
Series 540-550outlet 1/2”
Series 560outlet 1/2”
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 402/419
The hoses to be assembled on the hose reels must be suitable for the working pressures specifiedon the label.
The range of hoses offered by RAASM for its hose reels is in line with company's quality standards andguarantees excellent performance in the applications with the pressures specified in the catalogue. For
conditions different from those recommended, RAASM is available to appraise every aspect of theapplication context (compatibility of the materials used with the fluid, temperature of use, workingpressure, etc.) together with the customer for identifying the right hose for each specific case.
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 403/419
HOSES - TECHNICAL DATA 403403
Art. 66893 Nipple in carbon steel 1/2”G x 1/4”G M/M
Art. 38072 Nipple in carbon steel 1/2”G x 3/8”G M/M
Art. 38071 Nipple in carbon steel 1/2”G x 1/2”G M/M
Art. 33114 Nipple in carbon steel 1”G x 1/2”G M/M
Art. 33117 Nipple in carbon steel 3/4”G x 3/4”G M/M
Art. 33119 Nipple in carbon steel 1”G x 3/4”G M/M
Art. 33116 Nipple in carbon steel 1”G x 1”G M/M
Art. 33270 Nipple in carbon steel 1.1/2”G x 3/4”G M/M
Art. 33271 Nipple in carbon steel 1.1/2”G x 1”G M/M
Art. 33272 Nipple in carbon steel 1.1/2”G x 1.1/4”G M/M
Art. 33273 Nipple in carbon steel 1.1/2”G x 1.1/4”G M/F
Art. 33274 Nipple in carbon steel 1”G x 1/2”G M/F
Art. 38120 Nipple in AISI 304 stainless steel 1/2”G x 3/8”G M/M
Art. 38121 Nipple in AISI 304 stainless steel 1/2”G x 1/2”G M/M
Art. 33130 Nipple in AISI 304 stainless steel 3/4”G x 3/4”G M/M
Art. 33128 Nipple in AISI 304 stainless steel 1”G x 3/4”G M/M
Art. 33129 Nipple in AISI 304 stainless steel 1”G x 1”G M/M
Art. 66893 Art. 38072
Art. 38071 Art. 33114
Art. 33117 Art. 33119
Art. 33116 Art. 33270
Art. 33271 Art. 33272
Art. 33273 Art. 33274
Art. 38120 Art. 38121
Art. 33130 Art. 33128
Art. 33129
Series 380 - 390 Series 420 - 430 - 520 - 530 Series 440 - 450
Series 540 - 550 - 560outlet 1”
Series 540 - 550 - 560outlet 1/2”
Series Welding - Natural Gas
HOSE REEL OUTLET HOSE CONNECTION
HOSE REEL OUTLET HOSE CONNECTIONS FITTINGS
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 404/419
HOSES - TECHNICAL DATA 404404
10 bar
10 bar
10 bar
10 bar10 bar
20 bar
20 bar
20 bar
20 bar
20 bar
20 bar
100 bar
100 bar
100 bar
100 bar
150 bar
150 bar
150 bar
150 bar
150 bar
150 bar
150 bar
150 bar
200 bar
200 bar
200 bar
400 bar
400 bar
400 bar
400 bar
600 bar
600 bar
600 bar
600 bar
600 bar
M 1/2"G
M 1"G
M 1/2"G
M 1"GM 1.1/2"G
SNODO
F 3/8"G
F 3/8"G-Sx
M 1/4"G
M 1/4"G
M 3/8"G
M 1/2"G
M 1"G
M 1/2"G
M 1"G
M 1/2"GM 1/2"G
F 1/2"G
M 1/2"G
M 3/4"G
M 1"G
M 1"G
M 1"G
M 3/8"G
M 3/8"G
M 3/8"G
M 3/8"G
M 3/8"G
M 3/8"G
M 1/2"G
F 1/4"G
M 1/4"G
M 3/8"G
M 3/8"G
M 3/8"G
F 1/2"G
F 1"G
F 1/2"G
F 1"GF 1.1/2"G
M 1/4"G
F 3/8"G
F 3/8"G-Sx
F 1/4"G
F 1/4"G
F 3/8"G
F 1/2"G
F 1"G
F 1/2"G
F 1"G
F 1/2"GF 1/2"G
F 1/2"G
F 1/2"G
F 3/4"G
F 1"G
F 1"G
F 1"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 1/2"G
F 1/4"G
F 1/4"G
F 3/8"G
F 3/8"G
F 3/8"G
13 x 20
25 x 35
13 x 23
25 x 3738 x 50
8x12
9 + 9x16
10 x 17
6,4 x13
6,4 x13
9,5 x 16
12,7 x 18,5
25,4 x 31,5
12,7 x 18,5
25,4 x 31,5
12,7 x 1912,7 x 19
12,7 x 19
12,7 x 19
19 x 26,5
25,4 x 31,5
25,4 x 31,5
25,4 x 31,5
9,5 x 17
9,5 x 17
9,5 x 17
9,5 x 17,5
9,5 x 17,5
9,5 x 17,5
12,7 x 21,5
6,3 x 17,5
6,3 x 17,5
9,5 x 18
9,5 x 18
9,5 x 18
1/2"
1"
1/2"
1"1.1/2"
5/16"
2x3/8"
3/8"
1/4"
1/4"
3/8"
1/2"
1"
1/2"
1"
1/2"1/2"
1/2"
1/2"
3/4"
1"
1"
1"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/4"
1/4"
3/8"
3/8"
3/8"
black rubber
black rubber
hygienic cover
hygienic cover
black rubber
Polyurethane
SBR/EPDM
NBR/PVC
black rubber
black rubber
black rubber
hygienic cover
hygienic cover
hygienic cover
hygienic cover
black rubberblack rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
hygienic cover
black rubber
hygienic cover
hygienic cover
black rubber
hygienic cover
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
0,6m
0,6m
0,6m
0,6m0,6m
1,5m
1,5m
1,5m
1m
2m
0,6m
0,6m
0,6m
0,6m
0,6m
0,6m1m
2m
4m
5m
0,6m
1m
2m
0,6m
0,6m
0,6m
0,6m
0,6m
0,6m
0,6m
1,5m
4m
0,6m
1m
2m
996.806
998.806
986.106
988.1069911.306
971.102
975.902
975.1002
993.201
993.202
995.206
986.406
988.406
996.406
998.406
996.306996.301
996.302
996.304
997.505
998.506
998.501
998.502
985.606
995.506
995.606
985.906
995.806
995.906
996.706
993.502
993.504
995.706
995.701
995.702
HOSE REEL - SYSTEMS EQUIPMENT CONNECTION HOSES TABLE
galvanised steel
galvanised steel
s/steel AISI 304
s/steel AISI 304galvanised steel
brass
brass
brass
galvanised steel
galvanised steel
galvanised steel
s/steel AISI 304
s/steel AISI 304
galvanised steel
galvanised steel
galvanised steel
galvanised steel
galvanised steel
galvanised steel
galvanised steel
galvanised steel
galvanised steel
galvanised steel
s/steel AISI 304
galvanised steel
galvanised steel
s/steel AISI 304
galvanised steel
galvanised steelgalvanised steel
galvanised steel
galvanised steel
galvanised steel
galvanised steel
galvanised steel
HOSELENGTH
ARTICLE HOSE Ø INLET OUTLETHOSECHARACTERISTICS
PRESSURE UNIONSDIMENSIONS
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 405/419
HOSES - TECHNICAL DATA 405405
971.011
971.111
995.211
995.212
995.217995.218
996.210
996.215
996.220
996.225
996.230
996.240
996.250
996.260
996.270
996.280
996.290
996.2100
997.215
997.220
997.230
997.240
997.250
997.260
998.215
998.220
998.230
998.240
11m
11m
12m
12m
18m18m
10m
15m
20m
25m
30m
40m
50m
60m
70m
80m
90m
100m
15m
20m
30m
40m
50m
60m
15m
20m
30m
40m
Polyurethane
Polyurethane
black rubber
black rubber
black rubberblack rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
1/4"
5/16"
3/8"
3/8"
3/8"3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
1"
1"
1"
1"
M 1/4"G
M 1/4"G
M 3/8"G
F 3/8"G
M 3/8"GF 3/8"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 3/4"G
F 3/4"G
F 3/4"G
F 3/4"G
F 3/4"G
F 3/4"G
F 1"G
F 1"G
F 1"G
F 1"G
M 1/4"G
M 1/4"G
M 3/8"G
M 3/8"G
M 3/8"GM 3/8"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 3/4"G
M 3/4"G
M 3/4"G
M 3/4"G
M 3/4"G
M 3/4"G
M 1"G
M 1"G
M 1"G
M 1"G
995.313
995.318
995.412
996.311
996.316
996.321
996.326
996.331
996.341
996.351
996.361996.371
996.381
996.391
996.399
996.415
996.425
997.315
997.320
997.330
997.340
997.350
997.360997.420
998.315
998.320
998.330
998.340
12m
17m
12m
10m
15m
20m
25m
30m
40m
50m
60m70m
80m
90m
100m
15m
25m
15m
20m
30m
40m
50m
60m20m
15m
20m
30m
40m
black rubber
black rubber
hygienic cover
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubberblack rubber
black rubber
black rubber
black rubber
hygienic cover
hygienic cover
black rubber
black rubber
black rubber
black rubber
black rubber
black rubberhygienic cover
black rubber
black rubber
black rubber
black rubber
9,5 x 15
9,5 x 15
9,5 x 15
12,7 x 18,5
12,7 x 18,5
12,7 x 18,5
12,7 x 18,5
12,7 x 18,5
12,7 x 18,5
12,7 x 18,5
12,7 x 18,512,7 x 18,5
12,7 x 18,5
12,7 x 18,5
12,7 x 18,5
12,7 x 18,5
12,7 x 18,5
19 x 25
19 x 25
19 x 25
19 x 25
19 x 25
19 x 2519 x 25
25,4 x 31,5
25,4 x 31,5
25,4 x 31,5
25,4 x 31,5
M 3/8"G
M 3/8"G
M 3/8"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"GF 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 3/4"G
F 3/4"G
F 3/4"G
F 3/4"G
F 3/4"G
F 3/4"GF 3/4"G
F 1"G
F 1"G
F 1"G
F 1"G
M 3/8"G
M 3/8"G
M 3/8"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"GM 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 3/4"G
M 3/4"G
M 3/4"G
M 3/4"G
M 3/4"G
M 3/4"GM 3/4"G
M 1"G
M 1"G
M 1"G
M 1"G
Fittings
GalvanisedSteel
Air
Water
20 bar
Fittings
Galvanised
Steel
Waterhot water
100 bar
6x10
8x12
9,5 x 16
9,5 x 16
9,5 x 169,5 x 16
12,7 x 20
12,7 x 20
12,7 x 20
12,7 x 20
12,7 x 20
12,7 x 20
12,7 x 20
12,7 x 20
12,7 x 20
12,7 x 20
12,7 x 20
12,7 x 20
19 x 26,5
19 x 26,5
19 x 26,5
19 x 26,5
19 x 26,5
19 x 26,5
25,4 x 32,5
25,4 x 32,5
25,4 x 32,5
25,4 x 32,5
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"3/4"
1"
1"
1"
1"
HOSELENGTH
ARTICLE HOSE Ø INLET OUTLETHOSECHARACTERISTICS
DIMENSIONS
HOSELENGTH
ARTICLE HOSE Ø INLET OUTLETHOSECHARACTERISTICS
DIMENSIONS
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 406/419
FittingsStainless steel
AISI 304
Air
WaterNon toxic
10 bar
Fittings
Galvanised
Steel
WaterHot water
200 bar994.512994.517
994.612
995.512
995.518
995.520
995.525
995.530
995.540
995.550
995.618
995.625
995.630
12m17m
12m
12m
18m
20m
25m
30m
40m
50m
18m
25m
30m
black rubberblack rubber
hygienic cover
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
hygienic cover
hygienic cover
hygienic cover
5/16"5/16"
5/16"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
M 3/8"GM 3/8"G
M 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"GF 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
994.712
994.717
994.812
995.812
995.818
995.820
995.825
995.830
995.840995.850
995.918
995.925
995.930
12m
17m
12m
12m
18m
20m
25m
30m
40m50m
18m
25m
30m
black rubber
black rubber
hygienic cover
black rubber
black rubber
black rubber
black rubber
black rubber
black rubberblack rubber
hygienic cover
hygienic cover
hygienic cover
5/16"
5/16"
5/16"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"3/8"
3/8"
3/8"
3/8"
M 3/8"G
M 3/8"G
M 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"GF 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"GF 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
Fittings
Galvanised
Steel
WaterHot water
400 bar
986.110
986.115
986.120
986.125
986.130
986.140
986.150
986.160
987.115
987.120
987.130
987.140
988.115
988.120
988.130
10m
15m
20m
25m
30m
40m
50m
60m
15m
20m
30m
40m
15m
20m
30m
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
3/4"
3/4"
1"
1"
1"
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 3/4"G
F 3/4"G
F 3/4"G
F 3/4"G
F 1"G
F 1"G
F 1"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 3/4"G
M 3/4"G
M 3/4"G
M 3/4"G
M 1"G
M 1"G
M 1"G
406406 HOSES - TECHNICAL DATA
8 x 158 x 15
8 x 15
9,5 x 17
9,5 x 17
9,5 x 17
9,5 x 17
9,5 x 17
9,5 x 17
9,5 x 17
9,5 x 17
9,5 x 17
9,5 x 17
13 x 23
13 x 23
13 x 23
13 x 23
13 x 23
13 x 23
13 x 23
13 x 23
19 x 30
19 x 30
19 x 30
19 x 30
25 x 37
25 x 37
25 x 37
8 x 16
8 x 16
8 x 16
9,5 x 17,5
9,5 x 17,5
9,5 x 17,5
9,5 x 17,5
9,5 x 17,5
9,5 x 17,59,5 x 17,5
9,5 x 17,5
9,5 x 17,5
9,5 x 17,5
HOSELENGTH
ARTICLE HOSE Ø INLET OUTLETHOSECHARACTERISTICS
DIMENSIONS
HOSELENGTH
ARTICLE HOSE Ø INLET OUTLETHOSECHARACTERISTICS
DIMENSIONS
HOSELENGTH
ARTICLE HOSE Ø INLET OUTLETHOSECHARACTERISTICS
DIMENSIONS
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 407/419
986.410986.415
986.420
986.425
986.430
986.440
986.450
986.460
987.415
987.420
987.430
987.440
988.415
988.420
988.430
10m15m
20m
25m
30m
40m
50m
60m
15m
20m
30m
40m
15m
20m
30m
hygienic coverhygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
1/2"1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
3/4"
3/4"
1"
1"
1"
F 1/2"GF 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 3/4"G
F 3/4"G
F 3/4"G
F 3/4"G
F 1"G
F 1"G
F 1"G
M 1/2"GM 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 3/4"G
M 3/4"G
M 3/4"G
M 3/4"G
M 1"G
M 1"G
M 1"G
Fittings
Stainless steel
AISI 304
Water
Hot water
100 bar
985.612985.618
985.620
985.625
985.630
985.640
985.650
12m18m
20m
25m
30m
40m
50m
hygienic coverhygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
3/8"3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
F 3/8"GF 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"GF 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
Fittings
Stainless steel
AISI 304
WaterHot water
200 bar
985.912
985.918
985.920
985.925
985.930
985.940
985.950
12m
18m
20m
25m
30m
40m
50m
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
hygienic cover
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
F 3/8” G
F 3/8” G
F 3/8” G
F 3/8” G
F 3/8” G
F 3/8” G
F 3/8” G
F 3/8” G
F 3/8” G
F 3/8” G
F 3/8” G
F 3/8” G
F 3/8” G
F 3/8” G
Fittings
Stainless steel
AISI 304
WaterHot water
400 bar
407407HOSES - TECHNICAL DATA
9,5 x 179,5 x 17
9,5 x 17
9,5 x 17
9,5 x 17
9,5 x 17
9,5 x 17
9,5 x 17,5
9,5 x 17,5
9,5 x 17,5
9,5 x 17,5
9,5 x 17,5
9,5 x 17,5
9,5 x 17,5
12,7 x 18,512,7 x 18,5
12,7 x 18,5
12,7 x 18,5
12,7 x 18,5
12,7 x 18,5
12,7 x 18,5
12,7 x 18,5
19 x 25
19 x 25
19 x 25
19 x 25
25,4 x 31,5
25,4 x 31,5
25,4 x 31,5
HOSELENGTH
ARTICLE HOSE Ø INLET OUTLETHOSECHARACTERISTICS
DIMENSIONS
HOSELENGTH
ARTICLE HOSE Ø INLET OUTLETHOSECHARACTERISTICS
DIMENSIONS
HOSELENGTH
ARTICLE HOSE Ø INLET OUTLETHOSECHARACTERISTICS
DIMENSIONS
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 408/419
408408 HOSES - TECHNICAL DATA
Fittings
Galvanised
Steel
Grease
600 bar
995.312
995.317996.310
996.315
996.320
996.325
996.330
996.340
996.350
996.360
996.370
996.380
996.390
996.3100
997.515
997.520
997.530
997.540
997.550
997.560
998.515
998.520
998.530
998.540
12m
17m10m
15m
20m
25m
30m
40m
50m
60m
70m
80m
90m
100m
15m
20m
30m
40m
50m
60m
15m
20m
30m
40m
black rubber
black rubberblack rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
3/8"
3/8"1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
1"
1"
1"
1"
M 3/8"G
M 3/8"GF 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 1/2"G
F 3/4"G
F 3/4"G
F 3/4"G
F 3/4"G
F 3/4"G
F 3/4"G
F 1"G
F 1"G
F 1"G
F 1"G
M 1/2"G
M 1/2"GM 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 1/2"G
M 3/4"G
M 3/4"G
M 3/4"G
M 3/4"G
M 3/4"G
M 3/4"G
M 1"G
M 1"G
M 1"G
M 1"G
Fittings
Galvanised
Steel
Oil and alliedproducts
150 bar
993.511
993.512
993.516
993.518
995.710
995.715
995.720
995.725
995.730
12m
12m
16m
18m
10m
15m
20m
25m
30m
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
6,3 x 17,5
6,3 x 17,5
6,3 x 17,5
6,3 x 17,5
9,5 x 18
9,5 x 18
9,5 x 18
9,5 x 18
9,5 x 18
M3/8"G
F 1/4"G
M3/8"G
F 1/4"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
M 1/4"G
M 1/4"G
M 1/4"G
M 1/4"G
M 1/4"G
M 1/4"G
M 1/4"G
M 1/4"G
M 1/4"G
996.730
996.740
996.750
996.760
996.770
996.780996.790
996.7100
30m
40m
50m
60m
70m
80m90m
100m
black rubber
black rubber
black rubber
black rubber
black rubber
black rubberblack rubber
black rubber
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"1/2"
1/2"
F 1/2” G
F 1/2” G
F 1/2” G
F 1/2” G
F 1/2” G
F 1/2” GF 1/2” G
F 1/2” G
M 1/2” G
M 1/2” G
M 1/2” G
M 1/2” G
M 1/2” G
M 1/2” GM 1/2” G
M 1/2” G
Fittings
Galvanised
Steel
Grease
400 bar
9,5 x 17
9,5 x 1712,7 x 19
12,7 x 19
12,7 x 19
12,7 x 19
12,7 x 19
12,7 x 19
12,7 x 19
12,7 x 19
12,7 x 19
12,7 x 19
12,7 x 19
12,7 x 19
19 x 26,5
19 x 26,5
19 x 26,5
19 x 26,5
19 x 26,5
19 x 26,5
25,4 x 35,5
25,4 x 35,5
25,4 x 35,5
25,4 x 35,5
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
3/8"
12,7 x 21,5
12,7 x 21,5
12,7 x 21,5
12,7 x 21,5
12,7 x 21,5
12,7 x 21,512,7 x 21,5
12,7 x 21,5
HOSELENGTH
ARTICLE HOSE Ø INLET OUTLETHOSECHARACTERISTICS
HOSELENGTH
ARTICLE HOSE Ø INLET OUTLETHOSECHARACTERISTICS
DIMENSIONS
DIMENSIONS
HOSELENGTH
ARTICLE HOSE Ø INLET OUTLETHOSECHARACTERISTICS
DIMENSIONS
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 409/419
409409HOSES - TECHNICAL DATA
996.820
996.825997.815
997.820
997.830
997.835
997.840
997.850
997.860
998.815
998.820
998.830
998.840
9910.315
9910.320
9910.325
9910.330
9911.310
9911.315
9911.320
20m
25m15m
20m
30m
35m
40m
50m
60m
15m
20m
30m
40m
15m
20m
25m
30m
10m
15m
20m
black rubber
black rubberblack rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
black rubber
1/2"
1/2"3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
1"
1"
1"
1"
1.1/4"
1.1/4"
1.1/4"
1.1/4"
1.1/2"
1.1/2"
1.1/2"
F 1/2"G
F 1/2"GF 3/4"G
F 3/4"G
F 3/4"G
F 3/4"G
F 3/4"G
F 3/4"G
F 3/4"G
F 1"G
F 1"G
F 1"G
F 1"G
M 1.1/4"G
M 1.1/4"G
M 1.1/4"G
M 1.1/4"G
M 1.1/2"G
M 1.1/2"G
M 1.1/2"G
M 1/2"G
M 1/2"GM 3/4"G
M 3/4"G
M 3/4"G
M 3/4"G
M 3/4"G
M 3/4"G
M 3/4"G
M 1"G
M 1"G
M 1"G
M 1"G
M 1.1/4"G
M 1.1/4"G
M 1.1/4"G
M 1.1/4"G
M 1.1/2"G
M 1.1/2"G
M 1.1/2"G
Fittings
Galvanised
Steel
Diesel oil
10 bar
973.913
973.917
973.920973.925
973.930
973.935
974.912
974.915
974.920
974.925
974.930
974.935
975.915
975.920
975.925
975.927
13m
17m
20m25m
30m
35m
12m
15m
20m
25m
30m
35m
15m
20m
25m
27m
SBR/EPDM
SBR/EPDM
SBR/EPDMSBR/EPDM
SBR/EPDM
SBR/EPDM
SBR/EPDM
SBR/EPDM
SBR/EPDM
SBR/EPDM
SBR/EPDM
SBR/EPDM
SBR/EPDM
SBR/EPDM
SBR/EPDM
SBR/EPDM
2x1/4"
2x1/4"
2x1/4"2x1/4"
2x1/4"
2x1/4"
2x5/16"
2x5/16"
2x5/16"
2x5/16"
2x5/16"
2x5/16"
2x3/8"
2x3/8"
2x3/8"
2x3/8"
F 3/8"G
F 3/8"G
F 3/8"GF 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"GF 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
F 3/8"G
974.1015
974.1020
974.1024
974.1028
974.1030
975.1012
975.1018
975.1022975.1027
975.1030
15m
20m
24m
28m
30m
12m
18m
22m27m
30m
NBR/PVC
NBR/PVC
NBR/PVC
NBR/PVC
NBR/PVC
NBR/PVC
NBR/PVC
NBR/PVCNBR/PVC
NBR/PVC
5/16"
5/16"
5/16"
5/16"
5/16"
3/8"
3/8"
3/8"3/8"
3/8"
F 3/8"G-Sx
F 3/8"G-Sx
F 3/8"G-Sx
F 3/8"G-Sx
F 3/8"G-Sx
F 3/8"G-Sx
F 3/8"G-Sx
F 3/8"G-SxF 3/8"G-Sx
F 3/8"G-Sx
F 3/8"G-Sx
F 3/8"G-Sx
F 3/8"G-Sx
F 3/8"G-Sx
F 3/8"G-Sx
F 3/8"G-Sx
F 3/8"G-Sx
F 3/8"G-SxF 3/8"G-Sx
F 3/8"G-Sx
Fittings
Brass
Welding
20 bar
EN 559
Fittings
Brass
Lpg and
Natural gas
20 bar
EN 559
13 x 20
13 x 2019 x 27
19 x 27
19 x 27
19 x 27
19 x 27
19 x 27
19 x 27
25 x 35
25 x 35
25 x 35
25 x 35
32 x 44
32 x 44
32 x 44
32 x 44
38 x 50
38 x 50
38 x 50
6,3 + 6,3x13
6,3 + 6,3x13
6,3 + 6,3x136,3 + 6,3x13
6,3 + 6,3x13
6,3 + 6,3x13
8 + 8x15
8 + 8x15
8 + 8x15
8 + 8x15
8 + 8x15
8 + 8x15
9 + 9x16
9 + 9x16
9 + 9x16
9 + 9x16
8 x 15
8 x 15
8 x 15
8 x 15
8 x 15
10 x 17
10 x 17
10 x 1710 x 17
10 x 17
HOSELENGTH
ARTICLE HOSE Ø INLET OUTLETHOSECHARACTERISTICS
DIMENSIONS
HOSELENGTH
ARTICLE HOSE Ø INLET OUTLETHOSECHARACTERISTICS
DIMENSIONS
HOSELENGTH
ARTICLE HOSE Ø INLET OUTLETHOSECHARACTERISTICS
DIMENSIONS
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 410/419
PRODUCT CUSTOMISATION410410
Products for which a customised colour is not specified, are understood to be supplied with the
standard colour as per the catalogue.
To order an article with a colour different from standard, among the six made available, it is necessary to add
the following to the code
the suffix: / GREEN for green RAASM
/C1 for neutral Ral 7035
/C2 for yellow Ral 1004
/C3 for orange Ral 2004 /C4 for red Ral 3020
/C5 for blue Ral 5002
RAASM offers its customers the opportunity of ordering the products included in its range in different coloursamong the 6 made available.
They can be requested by customers without minimum quantity requirements, or extra costs, choosing
from the 5 additional colours to the standard colour (RAASM green).
Customisation is characterised exclusively by the colour and does not include: instruction handbooks, labels,brands, etc.
The above-mentioned customisation does not include the brake bleeders, pit and floor drainers, air-ope-rated pumps, trolleys, service columns and accessories.
Requests for different colours, in addition to those made available, or other types of customisation, must be
appraised from time to time and will be tied to minimum quantities and additional costs
Delivery times can vary with respect to standard colour products (RAASM green).
Note: See the examples given in the table on the next page
Example
Art. 44091
Example
Art. 52013 Art. 8520.101
RAL 7035
STANDARD COLOURS
RAASMgreen
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 411/419
COLOURS AVAILABLE FOR CUSTOMISATIONS 411411
Example
Art. 44091/C1
RAL 7035 suffix C1
suffix C2
Example
Art. 44091/C2 Art. 52013/C2
Art. 8520.101/C2
RAL 1004
suffix C3
Example
Art. 44091/C3 Art. 52013/C3
Art. 8520.101/C3
RAL 2004
suffix C4
Example
Art. 44091/C4 Art. 52013/C4
Art. 8520.101/C4
RAL 3020
suffix C5
Example
Art. 44091/C5 Art. 52013/C5
Art. 8520.101/C5
RAL 5002
RAASMgreen
suffix GREEN
Example
Art. 52013/green
Art. 8520.101/green
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 412/419
412412
This catalogue facilitates the consulting and ordering of spare parts by our dealers and users.
The components of each single article are grouped in kits called KR (=Spare Parts Kit).
This management of spare parts has enabled us to cut costs in favour of the final price.
Note: When ordering, remember that one kit may be common to several articles. Knowing this will prevent the
ordering of spare parts that would become pointless doubles.Example: the KR 6201 is the same for all grease pumps 50:1 and 65:1
Example: the KR 4302 is the same for all oil drainers.
See the spare part kits table and corresponding article/s.
GUIDE TO READING
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 413/419
413413
Each page of the following catalogue has the same graphic layout. For greater clarity the various sections
making up the various pages are illustrated below with a brief description.
List of KR's (spare part kits) into which the article is divided.Every KR (e.g. KR1003) includes a distinct and homogeneous set of parts.
A KR kit can be common to several articles.
List of parts of the article suppliable
individually
A KS (e.g. KS1080) groups the spare
parts (KR or single parts) given in the
other tables.
These are the spare parts recommended
by the manufacturer, at the sales points
and service centres, above all for first
deliveries.
Clearly, a KS cannot be shown in the
exploded view
The seal kit (e.g. KR1050) includes all the seals used in the article.This kit is not mentioned or shown in the exploded view.
THE SPARE PARTS CATALOGUE
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 414/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 415/419
415415
Reserved exclusively for the foreign market
Art. 1 : DELIVERY OF GOODS
The goods are only forwarded ex factory, by means of the carrier specified by the customer and, in any case, travel atthe customer’s risk and hazard.
Art. 2 : ORDERS
Orders for amounts of less than Eur 1500,00 (one thousand five hundred Euro) are not accepted. Whenever the executionof orders for amounts of less than Eur 1500,00 becomes essential, Eur 155,00 shall be charged for partial refund of ouradministrative costs.
Art. 3 : ACCESSORIES
All the accessories given in the price list (plugs, oil bar taps, oil guns, grease guns, probes, etc.) are supplied exclusively forfitting to or combining with the articles we produce.
Art. 4 : COMPLAINTS
Any complaint for shortages, errors or defects, noticed by a first exam of the goods, must be sent in writing to our Headoffice within 8 days of receiving the goods. Any defect of the product that is possible to notice only by using must be sentin writing to our Head office within 8 days from its discovering.
Art. 5 : DELIVERY TERMS
The delivery dates are always approximate. Possible delays in delivery do not give the customer any right to cancel theorder or to claim ensuing damages. Urgent cases are subject acceptance by the Firm. The Firm has the right not toexecute the order and to execute it fully or partially, without any claims or claims for damage being made towards theFirm.
Art. 6 : PACKS AND PACKAGING
Packaging costs are included in the price, except for special packing, which shall be charged at cost.
Art. 7 : PRICES
The current Price list cancels the previous price list. In the event of changes to our price list and/or individual articles, thegoods shall be forwarded at the price in force on the day of delivery. The price-list and/or the prices of individual articlescan be changed even without notice, according to the changes in market conditions or technicalinnovations/modifications made to the product. The prices are understood to be ex our Factory.
Art. 8 : PAYMENTS
Payments must be made exclusively to RAASM S.p.a. at the agreed conditions. Deductions or rounding off shall in nocase be accepted. In the event of late payment with respect to the agreed conditions, the firm reserves the right to chargeinterest at the current rate and additional costs, starting from the day after that agreed on for payment. Discounts subjectto payment already credited shall be re-charged.
Art. 9 : WARRANTY
RAASM S.p.a. provides every product with its manual, giving installation and maintenance instructions and indicationsabout the controls that should be made. The warranty shall cover any defect due to material or manufacture procedurewithin validity and prescription terms fixed by the law, and, in this case, the only charge shall be of Eur 10,00. Theguarantee will lapse in case of incorrect installation, operation or maintenance of the products. The articles must bereturned free to our Factory for checking and acceptance. All technical information, drawings, illustrations etc. aresupplied for guidance only. The company reserves the right to amend any design or specification without prior notice.
Art. 10 : RESPONSABILITY
RAASM S.p.a. is relieved of all responsability and obligations for any accident to persons and things that can occur dueto or during use of the equipment, or caused by and in connection with the equipment.
Art. 11 : COMPETENT LAW COURT
These conditions of sale shall be governed by and construed with Italian law, and any disputes shall be settled by thelaw-court of Bassano del Grappa (VI), Italy
GENERAL SALES TERMS
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 416/419
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 417/419
417417
GRAPPA
BASSANO del
VICENZA
VENICEVERONA
PADOVA
A31
A4
EXIT FORBASSANOROSA’ -PADOVA
SS248
A4
VICENZA
San Zeno
S t a t a l e 4
7
S t a t a l e 4 7
Marostica
cita per Bassano/Padovane Bassano
Agip
HotelCamin
S t at al e 2 48
S t a
t a
l e
2 4 8
ASSANODEL GRAPPA
BY PLANE
With regular flights, the nearest
airports are those Venice Tessera, Verona Villafranca and Treviso.
• FROM VENICE TESSERA
Bassano can be reached by train:
Venice - Padova - Cittadella
Bassano del Grappa
• FROM VERONA VILLAFRANCA
Bassano can be reached by train:
Dossobuono - Verona - Vicenza
Cittadella - Bassano del Grappa
• FROM TREVISOBassano can be reached by train:
Treviso - Castelfranco - Cassola.
VeniceMilan
Rome
BY TRAIN
RAASM can be reached also by train,
getting off at Bassano del Grappastation.
• BOLZANO: Bolzano - Verona
Vicenza - Cittadella - Bassano del
Grappa
• MILAN: Milan - Verona - Vicenza
Cittadella - Bassano del Grappa
• BOLOGNA: Bologna - Padova
Cittadella - Bassano del Grappa
• TRIESTE - UDINE: Trieste - Udine
Codroipo - Treviso - Castelfranco
Bassano del Grappa
RAASM is approx. 3 km
from the Train Station.
BY OWNTRANSPORT
Arriving by car from the north or
west, with Verona as the referencepoint take the A4 Motorway
towards Vicenza - Valdastico.
At the Dueville exit head for
Bassano del Grappa.
If arriving from the south, with
Padova as the reference point take
State Road 47 towards Cittadella
Bassano del Grappa.
HOW TO REACH RAASM
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 418/419
All rights reserved
7/21/2019 Catalogue Raasm
http://slidepdf.com/reader/full/catalogue-raasm 419/419