CatalogueProductsDesign / BuildSteel Drums

About the company

About the company

Design/ BuildSteel Drums

I N T C S t e e l D r u m s L L C

The company takes pride in manufacturing drums to the

international standard of the highest quality.

Through constant process improvements, we provide

products which are tough, durable and capable of

withstanding the most punishing usage.

Our steel drums are versatile and can be used for

transporting lubricant oil, hazardous and non-hazardous

chemicals, food additives, pulp, etc.

We are UN Certified,

ISO 2015 :9001, ISO 2015 :14001, OHSAS 2007 :18001

Our Products

Tight Head Unlined, TH (UL)

Full Open Head Unlined, FOH (UL)

Tight Head Epoxy, TH (E)

Full Open Head Epoxy, FOH (E)

Full Open Head Paint FOH (P)

Tight Head Unlined TH (UL)

Full Open Head Unlined FOH (UL)

• Drum Type: Tight Head (Closed Top)• Body Thickness: 0.6mm – 1.2mm• End Thickness (Top/Bottom): 0.8mm – 1.5mm• Capacity : 210 Litre (55 Gallon)• Inner Coating : None• Applications : Oils, Lubricants, Chemicals• Solvents, Polymer Resins etc.

• Drum Type: Open Head (Open Top)• Body Thickness: 0.8mm – 1.2mm• End Thickness (Top/Bottom):0.8 mm – 1.2 mm• Capacity :210 Litre (55 Gallon)• Inner Coating : None• Applications: Paints, Grease, Powders etc.

Tight Head Epoxy TH (E)• Drum Type: Tight Head (Closed Top)• Body Thickness: 0.8mm – 1.2mm• End Thickness (Top/Bottom):0.8 mm – 1.2 mm• Capacity :210 Litre (55 Gallon)• Inner Coating: Epoxy Phenolic Lacquer Lining.• Applications: Ethanol etc.

Full Open Head Epoxy FOH (E)• Drum Type: Tight Head (Closed Top)• Body Thickness: 0.8mm – 1.2mm• End Thickness (Top/Bottom):0.8 mm – 1.2 mm• Capacity :210 Litre (55 Gallon)• Inner Coating: Epoxy Phenolic Lacquer Lining.• Applications: Food additives, Inks etc.

Full Open Head Unlined FOH (P)• Drum Type: Full Open Head Paint (Open Top)• Body Thickness: 0.8mm – 1.2mm• End Thickness (Top/Bottom):0.8 mm – 1.2 mm• Capacity :210 Litre (55 Gallon)• Inner Coating: Stoving Paint• Applications: Chemicals, Fruit juice, etc.

TheProcessDesign/ BuildSteel Drums

The ProcessI N T C u s e s t h e m o s t a d v a n c e d f u l l y a u t o m a t e d s t e e l d r u m p ro d u c t i o n l i n e a v a i l a b l e e x i s t i n g o f :

1 . Hydraulic Up-Coiling Unit

2 . Uncoiling Unit

3 . Side Deviation Rectifying Unit

4 . Sheet Cleaning Machine

5 . 7 roller Servo Sizing & Flattening Machine

6 . Sheet-cutting Machine

7 . Roller Set

8 . Electric Control System

9 . Hydraulic Station

10 . Lift Piler

11 . Sheet Blanking Frame

Drum Lids Equipment 1 . Cover Pressing Machine 125T

2 . Double Locking Pressing Machine

3 . Moulds for Barrel Covers

4 . Double Locking Moulds

5 . Pre-Curling & Gluing Machine

6 . Overturn the Lid Machine

7 . Lid Fixing Machine

8 . Lid Searching Machine:

9 . Lid Step Feeding Machine

10 . Closure Step Feeding Machine

11 . Closure Vibrator

Mid-Section Equipment 1 . Auto Feeder

2 . Automatic Seam Welding Machine

3 . Flanger and Beader

4 . Corrugation (“W” Reinforced Rib) Forming Machine

5 . Edge-Curling Machine

6 . Semiautomatic Leak Checking Machine

7 . Cleaning machine for inside

8 . Cleaning machine for outside

9 . Drum Conveyor

10 . Electric Control System

Rear Section Equipment 1 . Paint Spraying Room

2 . 26D Paint Spraying & Drying Line

3 . Trans-Line &Roller Trans-Line after Spraying

4 . Overturn Machine

TheProcessDesign / BuildSteel Drums

P.O.Box : 211347 Plot No.: 597/551

Dubai Investment Park-2, Dubai - U.A.E.

Tel +971 48178444

Fax +971 8178453

info@intcsteeldrums.com

www.intcsteeldrums.com