Catalogue - Charles Endirect Ltd · 4 GIFAS ELECTRIC GmbH Borsigstrasse 9 41469 Neuss GERMANY...

YO

UR

WIS

HES

AR

E O

UR

BEN

CH

MA

RK

02

Underfloor distributors

Catalogue

2 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY

Table of Contents

PIAZZA

Page 3

PICCOLINO /RETRANT

Pages 4-7

Introduction

1 Page 22

PICCOLINO RETRANT

Page 5

PIAZZA 540

Page 13

CAMPETTO VCAMPETTO

Pages 12-16

Page 20

Installation instructions

Page 14

CAMPETTO VI

Page 15

CAMPETTO VII

Page 6

PIAZZA 700

Page 7

PIAZZA 1000

Page 16

CAMPETTO VIII

Pages 17-19

Practicalexamples

Pages 8-10

Practicalexamples

Page 23

Practicalexamples

Page 11


Pages 21-23

CAMPETTO

Pages 17-20

PIAZZA

Pages 8-11

Page 12

OverviewCAMPETTO

Page 4

OverviewPIAZZA

3Telephone +49 2137 105-0 · Fax +49 2137 105-230 · [email protected] · www.gifas.de

Introduction

Underfloor distributors virtually invisible - always within reach

Thanks to our underfloor distributors, electrical power is quickly available anywhere and without time-consuming installation work! As with all of our products, we attach great importance to high-quality componentsand manufacturing. Only solid rubber distributors made in-house, with their outstanding material properties, are used.

The benefits for you

- Power available at any time and quickly - Ready for use immediately - Can be walked or driven over during operation - No power cables lying around, no danger of tripping - Covers can be individually filled / paved - Lockable in the contacted area - Gas springs for force-free, automatic opening - Frost-proof operation thanks to cover heating - Flooding-resistant on request - Maintenance-free solid rubber distributor system for electricity, water,

compressed air and data connections, fittings as per the client's wishes

Our services

- Personalised, professional advice, including on site - Tried-and-tested product range - Tailored, customised solutions - Production of single and large series - Long spare parts availability

The structure of an underfloor distributor

Electric supply line

Flexible connecting cable

Cable opening (for closed operation)

Connecting set

Outlet for drainage

Power distributor

Gas spring

Earthing plugs

Built in accordance with: - BGA V1 and BGA V3 - VDE 0100 Part 410 and 540 - VDE 0660 Part 500 - VDE 0660 Part 501 - depending on design - VDE 0471

The right choice

The following questions need to be answered in order to choose the right underfloor distributor:

1. What power connections are wanted?The size of the solid rubber distributor is defined by the socket occupancy and type of fuses used. The distributor is mounted on the cover of the underfloor distributor. The size of the power distribution also defines the junction box. We will be happy to provide more detailed information and explanations.

2. Where will the underfloor distributor be installed?Information regarding internal or external installation, along with how it will be used, is useful for ensuring the best possible design.

3. Does the underfloor distributor need to be able to withstand traffic?Your underfloor distributor is designed specifically for your needs. The higher the weight, the stronger the underfloor distributor and the foundations need to be.

4. Do you want the cover to be filled?If your underfloor distributor is to blend in perfectly with its surroundings, filling of the cover is required. There are no restrictions on the type of filling that can be used (cobbles, wood, tar, etc.).

5. Is drainage guaranteed?In order to protect the underfloor distributor from water damage, drainage must be guaranteed through the preparation of appropriate drainage (this is always the client's responsibility).


Overview of PIAZZA 540 / 700 / 1000

Technical data PIAZZA 540 PIAZZA 700 PIAZZA 1000

Area of use Internal / external area Internal / external area Internal / external area

Classification as per EN 124 400kN (40t) / D400 400kN (40t) / D400 400kN (40t) / D400

Cover Covers can be individually filled / paved580x580x70mm

Covers can be individually filled / paved700x700x70mm

Covers can be individually filled / paved1000x1000x70mm

Weight Approx. 350kg Approx. 450kg Approx. 780kg

Installation depth Approx. 1200mm Approx. 1300mm Approx. 1300mm

GIFAS solid rubber distributors 3800 series 7800 series 7800/7900 series

Can be equipped in accordance with the client's wishes (power, water, waste water, compressed air and EDP connections)

1 CEE built-in socket 5x16A/400V2 protective contact sockets

1 CEE built-in socket 5x63A /400V1 CEE built-in socket 5x32A/400V1 CEE built-in socket 5x16A/400V3 protective contact sockets

1 CEE built-in socket 5x63A/400V1 CEE built-in socket 5x32A/400V3 CEE built-in socket 5x16A/400V6 protective contact sockets

Fuses 1 RCCB 40/0.03A1 LP 16A / 3-pin2 LP 16A / 1-pin

1 LP 63A / 3-pin1 LP 32A / 3-pin1 LP 16A / 3-pin3 LP 16A / 1-pin1 LP 63A / 3-pin pre-fusing 1 RCCB 63/0.03A / 4-pin for 63A socket1 RCCB 63/0.03A/ 4-pin for the remaining sockets

1 LP 63A / 3-pin1 LP 32A / 3-pin3 LP 16A / 3-pin6 LP 16A / 1-pin1RCCB 63/0.03A for 63A built-in socket 1RCCB 63/0.03A for 16A built-in sockets1 RCCB 63/0.03A for 32A built-in socket and protective contact sockets

Product features

- Sturdy, easy to use and safe in operation - Can be walked or driven over even during operation - Integrates perfectly into its surroundings thanks to customisable

filling options - Secured against unauthorised opening (vandal-proof) and lockable

in the contacted area - Easy and quick opening and closing, supported by gas springs - Frost-proof operation thanks to cover heating - The GIFAS solid rubber distributor guarantees optimum operating

safety down to -40°C.

PIAZZA 540 PIAZZA 700 PIAZZA 1000

PIAZZA

- No formation of condensation thanks to the GIFAS solid rubber distributor - Resistant to environmental influences - Stainless steel construction, all metal parts made from V2A

with cathodic dip coating - Visible reflectors on the opened cover system - Distributor fastening on the underside of the cover - The connector distributor can be accessed when installed (E-check) - Pit cover, lock and distributor can be replaced


PIAZZA 540

Solid stainless steel construction (V2A) 540 x 540 mm, load capacity up to 400 kN, gas springs for fully automatic opening, shaft cover can be custom-filled, distributor as per the client's request.

Technical additions

Cover filling: The pit with a depth of 70 mm can be custom-filled to blend in with its surroundings.Cable exit flap: (180x130 mm) integrated into the shaft cover frame.Locking: a self-cleaning lock with snap fastener closes the shaft cover. Cable exit flap secured with a double bit lock (locking tool included in scope of delivery). Heating: the shaft cover contains a self- regulating heating strip which helps to ensure easy opening in the event of frost.

It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water.

Supplied packageStainless steel construction with - fillable shaft cover - solid rubber electrical distributor - junction box

Fully assembled and wired. Mounted on concrete ring (H = 470 mm, NW = 600 mm).

PIAZZA


PIAZZA 700


Technical additions

Cover filling: The pit with a depth of 70 mm can be custom-filled to blend in with its surround ings.Cable exit flap: (180x130 mm) integrated into the shaft cover frame. Locking: A sturdy closing mechanism (with snap lock) closes the shaft cover and it can also be secured with a shackle lock. Cable exit flap secured with a double bit lock (locking tool included in scope of delivery).Heating: A self-regulating heating strip is integrated into the shaft cover in order to ensure easy opening in the event of frost.




PIAZZA


PIAZZA 1000


Technical additions

Cover filling: The pit with a depth of 70 mm can be custom-filled to blend in with its surround ings.Cable exit flap: (180x130 mm) integrated into the shaft cover frame. Locking: A sturdy closing mechanism (with snap lock) closes the shaft cover and it can also be secured with a shackle lock. Cable exit flap secured with a double bit lock (locking tool included in scope of delivery).Heating: A self-regulating heating strip is integrated into the shaft cover in order to ensure easy opening in the event of frost.




PIAZZA


Practical examples

Detmold marketplace, PIAZZA 1000

Lübeck town hall market, PIAZZA with payment system

PIAZZA

Lübeck town hall market, PIAZZA with payment system

Detmold marketplace, PIAZZA 1000

Detmold marketplace, PIAZZA 1000 Lübeck town hall market, PIAZZA with payment system


Wiesbaden Assembly Rooms, PIAZZA Wiesbaden Assembly Rooms, PIAZZA

Practical examples

PIAZZA

Thyssen, PIAZZA 700 Thyssen, PIAZZA 700

Hangar, PIAZZA 700 Hangar, PIAZZA 700


Dresden "Zwinger", PIAZZA 700 Dresden "Zwinger", PIAZZA 700

PIAZZA

Practical examples

Airport PIAZZA 2000 Airport PIAZZA 2000

Munich Residence, PIAZZA 700Munich Residence, PIAZZA 700



Excavating the installation pit Customer-side concrete ring Insertion of the unit

Insertion of the entire unit into the prepared installation pit

Levelling Decanting and concreting-in

PIAZZA installation and assembly procedure

Adaptation to the surroundings with filler material

Fully installed PIAZZA

With underfloor systems involving fresh water, the terminal distributor must be hung on the side opposite the water tap!


CAMPETTO

Overview of CAMPETTO V / VI / VII / VIII

Technical data CAMPETTO V CAMPETTO VI CAMPETTO VII CAMPETTO VIII

Area of use Internal / external area Internal / external area Internal / external area Internal / external area

Maximum load Up to 30kN (3t), special designs 50kN

125kN (12.5t) Up to 30kN (3t)Special designs 50kN

125kN (12.5t)

Classification as per EN 124

15kN (1.5t) / A15 125kN (12.5t) / B125 15kN (1.5t) / A15 125kN (12.5t) / B125

Cover Stainless steel non-slip steel floor plate, can be supplied in two sizes 628x435mm / 778x535mm

Covers can be individually filled / paved can be supplied in two sizes 628x435mm / 778x535mm

Stainless steel non-slip steel floor plate 880x992mm

Covers can be individually filled / paved880x992mm

Weight Approx. 60kg Approx. 70kg Approx. 250kg Approx. 250kg

Installation depth Dependent on design 500 or 670mm

Dependent on design 500 or 670mm

1000mm 1000mm

GIFAS solid rubber distributors

Individual series 7200 to 7900




Can be equipped in accordance with the client's wishes (power, water, waste water, compressed air and EDP connections)

1 CEE built-in socket 5x32A/400V1 CEE built-in socket 5x16A/400V3 protective contactsockets

1 CEE built-in socket 5x32A/400V1 CEE built-in socket 5x16A/400V3 protective contact sockets



Fuses 1 LP 32A / 3-pin1 LP 16A / 3-pin3 LP 16A / 1-pin1 LP 63A / 3-pin for pre-fusing1 RCCB 63/0.03 A / 4-pin for all sockets

1 LP 32A / 3-pin1 LP 16A / 3-pin3 LP 16A / 1-pin1 LP 63A / 3-pin for pre-fusing1 RCCB 63/0.03A / 4-pin for all sockets

1 LP 63A / 3-pin1 LP 32A / 3-pin3 LP 16A / 3-pin6 LP 16A / 1-pin 1 RCCB 63/0.03A for 63A built-in socket 1 RCCB 63/0.03A for 16A built-in socket 1 RCCB 63/0.03A for 32A built-in socket protective contact sockets

1 LP 63A / 3-pin1 LP 32A / 3-pin3 LP 16A / 3-pin6 LP 16A / 1-pin 1 RCCB 63/0.03A for 63A built-in socket 1 RCCB 63/0.03A for 16A built-in socket 1 RCCB 63/0.03A for 32A built-in socket protective contact sockets

Product features

- Sturdy, easy to use and safe in operation - Can be walked or driven over even during operation - Integrates perfectly into its surroundings thanks to customisable

filling options - Secured against unauthorised opening (vandal-proof) and lockable

in the contacted area - Easy and quick opening and closing, supported by gas springs - Frost-proof operation thanks to cover heating option - The GIFAS solid rubber distributor guarantees optimum operating

Safety down to -40°C.

- No formation of condensation thanks to the GIFAS solid rubber distributor - Resistant to environmental influences - Stainless steel construction, all metal parts made from V2A with

cathodic dip coating - Visible reflectors on the opened cover system - Cover pit can be removed by loosening the screws for maintenance

purposes - Distributor fastening on the underside of the cover - The connector distributor can be accessed when installed (E-check) - Pit cover, lock and distributor can be replaced


CAMPETTO

CAMPETTO V

Solid stainless steel construction (V2A) in two sizes, load capacity up to 30 kN (special design up to 50 kN), gas springs for fully automatic opening, shaft cover made from non-slip steel floor plate, distributor as per the client's request.

Technical additions

Cover: V2A non-slip steel floor plate Cable exit flap: (135x90 mm) in the centre on the head side of the cover.Locking: a self-cleaning lock with snap fastener closes the shaft cover (locking tool includ ed in the scope of delivery). Heating (optional): the shaft contains a self-regulating heat ing strip which ensures easy opening in the event of frost.


Supplied packageStainless steel construction with - cover made from V2A non-slip steel floor plate - solid rubber electrical distributor - junction box

Fully assembled and wired.

for distributors 7200 – 7400


Pavement

Sand

Gravel

Concrete collar

Pavement

Sand

Gravel

Concrete collar


CAMPETTO VI

Solid stainless steel construction (V2A) in two sizes, load capacity up to 125 kN, gas springs for fully automatic opening, shaft cover can be custom-filled, distributor as per the client's request.

Technical additions

Cover filling: The pit with a depth of 70 mm can be custom-filled to blend in with its surround ings.Cable exit flap: (135x90 mm) in the centre on the head side of the cover.Locking: a self-cleaning lock with snap fastener closes the shaft cover (locking tool includ ed in the scope of delivery). Heating (optional): the shaft contains a self-regulating heat ing strip which ensures easy opening in the event of frost.






CAMPETTO

Pavement

Sand

Gravel

Concrete collar

Pavement

Sand

Gravel

Concrete collar


CAMPETTO VII

Solid stainless steel construction (V2A), load capacity up to 15 kN (special design up to 50 kN), gas springs for fully automatic opening, shaft cover made from non-slip steel floor plate, distributor as per the client's request.

Technical additions

Cover: V2A non-slip steel floor plate Cable exit flap: (135x90 mm) in the centre on the head side of the coverLocking: a self-cleaning lock with snap fastener closes the shaft cover (locking tool includ ed in the scope of delivery). Heating (optional): the shaft contains a self-regulating heat ing strip which ensures easy opening in the event of frost.


Supplied packageStainless steel construction with - cover made from V2A non-slip steel floor plate - solid rubber electrical distributor - junction box



CAMPETTO

992

940

Bep�asterung

Betonmanschette

Sand

Kies

PavementSand

Gravel

Concrete collar


CAMPETTO

CAMPETTO VIII

Solid stainless steel construction (V2A), load capacity up to 125 kN, gas springs for fully automatic opening, shaft cover can be custom-filled, distributor as per the client's request.

Technical additions

Cover filling: The pit with a depth of 70 mm can be custom-filled to blend in with its surround ings.Cable exit flap: (280x90 mm) in the centre on the head side of the cover.Locking: a self-cleaning lock with snap fastener closes the shaft cover (locking tool includ ed in the scope of delivery). Heating (optional): the shaft contains a self-regulating heat ing strip which ensures easy opening in the event of frost.





992

940

Bep�asterung

Betonmanschette

Sand

Kies

PavementSand

Gravel

Concrete collar


Practical examples

Bad Saarow station, CAMPETTO VIBad Saarow station, CAMPETTO VI

BUGA Koblenz, CAMPETTO with diving bell

CAMPETTO

BUGA Koblenz, CAMPETTO with diving bell

Melitta Minden, CAMPETTO VILondon Olympic Games, CAMPETTO


Practical examples

Meckenbeuren church square, CAMPETTO VI Meckenbeuren church square, CAMPETTO VI

Daimler presentation hall, CAMPETTO VIDaimler presentation hall, CAMPETTO VI

Hotel Grand Spa Resort Sylt, CAMPETTO VI

CAMPETTO

Hotel Grand Spa Resort Sylt, CAMPETTO VI


Practical examples

Hampton Court Palace, CAMPETTO VI BUGA Schwerin, CAMPETTO V

Town of Illertissen, CAMPETTO VI Pforzheim marketplace, CAMPETTO VI

CAMPETTO

Max Planck Institute, CAMPETTO VIII Hamburg CruiseCenter, CAMPETTO VIII



Excavating the installation pit Topping up the installation pit Insertion of the unit

Filling Decanting and concreting-in Adaptation to the surroundings with filler material

Fully installed CAMPETTO

CAMPETTO installation and assembly procedure


PICCOLINO

PICCOLINO 120 / 200

Technical data PICCOLINO 120 PICCOLINO 200

Area of use Underfloor distributors for restricted spaces Underfloor distributors for restricted spaces

Classification as per EN 124 2kN (200kg) 250kN (25 t) / C250

Cover Stainless steel non-slip steel floor plate120x120mm

Stainless steel non-slip steel floor plate200x200mm

Weight Approx. 4.2kg Approx. 7.5kg

Installation depth Approx. 400mm Approx. 400mm

Equipment options 2m GIFAS-PROFLEXX-07 cable 3x2.5 m2

1 protective contact coupling 16A/230V (IP 68) or 1 CEE coupling 16A/400V (IP67)

2m GIFAS-PROFLEXX-07 cable 3x2.5 m2

1 protective contact coupling 16A/230V (IP 68) or 1 CEE coupling 5x16A/400V (IP 67) or 1 CEE coupling 5x32A/400V (IP 67)

PICCOLINO 120 PICCOLINO 200

Product features

- Solid stainless steel construction, rust-free - Completely maintenance-free (E-check) - Cover made from non-slip steel floor plate - Easy operation - Can be walked or driven over during operation - Ground-flush installation - Excellent operating safety thanks to reclosing after commissioning - Locking is performed using a countersunk, cover-flush dual bit lock (1

key included in the scope of delivery) - Cable exit opening in the cover lid for cables up to d = 15 mm

(PICCOLINO 120), d = 25 mm (PICCOLINO 200)


PICCOLINO 120 PICCOLINO 200

Twist protection

Potential Earthcross slot screw

2m GIFAS PROFLEXX 3x2,5(connection and shrinking need to be executed at contruction side)

cable exit

square sash fastener

Twist protection

Potential Earthcross slot screw

cable exit

square sash fastener

2m GIFAS PROFLEXX 3x2,5(connection and shrinking need to be executed at contruction side)

Potential EarthM8 bolt

Schuko-socketWD 230V 16A

holder socket


RETRANT

RETRANT

Product features

- Solid stainless steel construction, rust-free - Completely maintenance-free (E-check) - Cover made from non-slip steel floor plate - Easy operation - Can be walked or driven over during operation - Ground-flush installation - Excellent safety thanks to the GIFAS double pressure method; the

cover is held securely closed even without a lock - Locking is performed using a countersunk, cover-flush dual bit lock (1

Technical data RETRANT

Area of use Underfloor distributors for restricted spaces

Classification as per EN 124 15kN (1.5t) / A15

Cover Stainless steel non-slip steel floor plate340x240mm

Weight Approx. 25kg

Installation depth Approx. 420mm

GIFAS solid rubber distributors Series 2516, protection category IP 65

Equipment optionsIndividual as per the client's wishes

1 CEE built-in socket 5x32A/400V in straight design1 protective contact socket 230V (IP 68)

key included in the scope of delivery) - Cable exit for cables is located in the shaft cover


Cable input

Stainless steel cover

Lower part steel casing, coated against corrosion

Solid rubber casing type 2516Cable outlet 50 x 50 mm


RETRANT, Wiesbaden Assembly Rooms RETRANT, Wiesbaden Assembly Rooms

PICCOLINO 200

PICCOLINO / RETRANT

Practical examples

RETRANT, Wiesbaden Assembly Rooms

RETRANT, Lübeck town hall market RETRANT, Lübeck town hall market

GIFAS ELECTRIC GmbHBorsigstrasse 9, 41469 Neuss

PO Box 21 03 63, 41429 NeussGERMANY

Phone +49 2137 105-0Fax: +49 2137 105-230

[email protected]

CO

NTA

CT U

S T

OD

AY

Tech

nica

l mod

ifica

tions

rese

rved

02/

2013

New products and specialist solutions, along with the latest product catalogue, can be found on our website.

www.gifas.de

Catalogue - Charles Endirect Ltd · 4 GIFAS ELECTRIC GmbH Borsigstrasse 9 41469 Neuss GERMANY...

Documents

Transcript of Catalogue - Charles Endirect Ltd · 4 GIFAS ELECTRIC GmbH Borsigstrasse 9 41469 Neuss GERMANY...