Catalogue 2010 - 6th Edition - Reference Laboratory
-
Upload
armando-grati -
Category
Documents
-
view
243 -
download
5
description
Transcript of Catalogue 2010 - 6th Edition - Reference Laboratory
Looking ahead in Pro Audioaudio - video - digital - light - composite
CAT
ALO
GU
E 2
010
- 6TH
E
DIT
ION
CA
BLE
S MADE IN ITA
LY
a “sub woofer, mid and high” format to ensure optimum signal reproduction; at least a pair of cables of the same length, connected to masters A and B, with the same settings (EQ-flat, gain 0dB)
2. Alternate one cable with the other, doing your utmost to memorize the two responses, listening in a pair of headphonesand directly to the system’s output.
From 1992 to the present day, Reference Laboratory has managed to design its cables bearing in mind:- different fields of application (Studio and Live work)- different music genres and styles, to give the proper importance to the various requirements in terms of frequency response,
such as for example in ROCK music.- requisites regarding accurate reproduction of both electric and electro-acoustic instruments - the necessary characteristics for using both Dynamic and Condenser microphones.- requirements of minimum power loss along the line and signal transparency, above all for "LINE ARRAY" sound systems
whether they are for live use or subject to norms regarding permanent installations- requisites of power cables dedicated to use with discharge lighting fixtures- new technologies - composite cables carrying control, audio and video signals are increasingly useful- logistic limits - to face very demanding situations or great environmental differences: we are always ready to listen to end users to ensure
greater satisfaction (including that of the public or audience), designing and preparing custom turnkey solutions able to meet every need.On-going development - our technology depends on interaction with users to develop new ideas that bear in mind the improvementof the state of the art of the audio, video, lighting and power supply chains, NEVER penalizing the technology used upstream.
ABBIAMO IL PIACERE DI INTRODURRE IL NOSTRO FORMAT: STOP E ASCOLTA IL CAVO REFERERENCE1. La chiave di tutto sta nel far comprendere QUANTO il segnale possa variare, nel medesimo circuito (bilanciato, sbilanciato e di potenza),
sostituendo il CAVO.2. La nostra ricerca nella progettazione dei cavi è sempre stata guidata da questa esigenza.3. Abbiamo ANCHE valutato fosse necessario individuare un metodo, il+semplice, + trasparente ,+ realizzabile per consentire a TUTTI
di "Valutare" un CAVO.4. Con un po’ di CORAGGIO presentammo al Meet 05' in Milano il format "VIENI AD ASCOLTARE IL CAVO REFERENCE.
Musicisti, tecnici, media ed addetti al lavoro: TUTTI mostrarono sorpresa e curiosità di fronte alla nostra iniziativa e si resero subito disponibili alla prova di ascolto. La reazione fu immediatamente POSITIVA grazie all’immediatezza del test che permetteva di toccare con mano (e orecchio!) la differenza tra set-up di cavi diversi. Finalmente un metodo, nuovo e utilissimo per affinare il proprio set-up strumentale. Un deciso taglio col passato, quando il cavo altro non era che un accessorio, necessariamente a basso costo e inutilesi fini del sound. Il cavo si deve scegliere allo stesso modo e con la stessa cura con cui si sceglie uno strumento, delle corde, degli effetti o un amplificatore!
5. Grazie a tale successo portammo il “METODO REFERENCE Lab” in ogni fiera nazionale ed internazionale, istituimmo Clinics,e stabilimmo che il cavo Reference Laboratory fosse disponibile solo attraverso rivenditori "selezionati": denominati Ambassador.Un AMBASSADOR è un distributore (dealer o rivenditore locale) convinto e impegnato a svolgere le dimostrazioni secondo il METODO REFERENCE Lab. Abbiamo sottolineato il Metodo in prima pagina anche nel nostro catalogo. Per chi è interessatoe vuol saperne di più, in occasione di fiere e clinics, saremo in grado di fornire loro test audio e set-ups su cui fare le proprie prove.
6. Tutto questo per contribuire a quella che amiamo definire la “cultura del cavo” e fornire gli strumenti per distinguere, tra l’altro,tra il concetto di prezzo e quello di qualità sonora: non sempre il prezzo elevato corrisponde ad una prestazione sonora equivalente!!
7. La regola a nostro avviso è quella di ascoltare il CAVO con le proprie orecchie ,attraverso il proprio strumento ed il proprio stile,quindi come meglio indicato nel METODO Reference Laboratory:
Il METODO REFERENCE Lab in pochi passi“Il MEDOTO REFERENCE Lab è una rigorosa comparazione audio, possibilmente cieca”
Valutazione di un cavo per strumentoAscoltare il proprio strumento (chitarra o basso) in due steps:1. attraverso un mixer con ascolto in cuffia. 2. poi attraverso il proprio amplificatore ( ho un amplificatore del quale già si conosce il “suono”) Tenendo a mente quell'accordo
e quel sound, ripetere la prova (medesima esecuzione) sostituendo il CAVO .
Ripetere la prova finché non si è certi di aver compreso le differenze tra i due cavi .
Una volta notata la differenza passate ad ascoltare il cavo tramite l’amplificatore
È FONDAMENTALE tenere a mente il suono di un cavo, dimenticandone il modello e la marca, concentrandosi solo sull'estensione e lacolorazione della risposta acustica... Solo così passando ad un altro CAVO verrà naturale SENTIRNE le differenze, e quindi valutare escegliere il cavo + adatto al proprio stile.
PERCHE' RICHIEDIAMO di svolgere la comparazione sia attraverso l'ascolto in Cuffia che con un Amplificatore?Perché i due metodi di riproduzione rivelano aspetti diversi del segnale e permettono di valutare l’impatto di un cavo sia sulla linea che filtratoda un altoparlante.
Valutazione di un cavo per microfonico1. Set-up necessario:
- un mixer ed un sistema audio in configurazione mono ; il sistema di diffusori deve essere possibilmente in formato “sub, woofer, medi,alti” per fornire una rappresentazione ottimale del segnale; - almeno un paio di cavi di pari lunghezza, collagati ai master A e B, con le stesse regolazioni (EQ-flat, gain 0dB)
2. Utilizzare alternativamente un cavo e poi l’altro, sforzandosi di memorizzare le due risposte, andando in ascolto sia in cuffiache in diretta dal sistema .
Dal 1992 ad oggi la Reference Laboratory è riuscita a progettare i suoi cavi tenendo conto di:- campi di applicazioni diversi (Studio e Live)- diversi stili musicali, per dare giusto rilievo alle diverse esigenze in termini di risposta in frequenza, come ad esempio nella musica ROCK.- requisiti di fedeltà di riproduzione sia di strumenti elettrici che elettro-acustici- caratteristiche necessarie per alimentare sia un microfono Dinamico che uno a Condensatore- esigenze di minima perdita di potenza sulla linea e trasparenza del segnale, soprattutto per i sistemi audio "LINE ARRAY", siano essi
in Live che soggetti alle normative per le Installazioni Fisse- requisiti dei cavi di potenza dedicati alle luci a scarica- nuove tecnologie - Risultano sempre più utili cavi compositi, con segnali di controllo, audio, e video- vincoli logistici - per affrontare situazioni molto impegnative o grandi diversità ambientali: siamo sempre pronti all’ascolto per aumentare
la soddisfazione dell’operatore e… del pubblico, sviluppando soluzioni chiavi in mano su misura.- lo sviluppo continuo - la nostra tecnologia non può fare a meno del confronto con l'utilizzatore per sviluppare sempre nuove soluzioni
con in mente il miglioramento dello stato dell’arte delle catene audio, video, luci e di potenza, senza MAI penalizzarele tecnologie a monte.
Reference Laboratory “Cable's Philosophy”
www.referencelaboratory.com
www.referencelaboratory.com
Inside Referencep.2
Osimo September '08
Reference Labs considers travelling as the bestoccasion to meet "End Users"&"Dealers". This is themain step to decide what to do on planning asuitable production and making customersappreciating it. Then it is very much importantbecause it makes you able to understand how muchmarkets know about audio, video and light audioCABLES technology. All respectful relationshipsmake people growing by sharing every opinion.In the same way the human aspect of relationships isvery much determinative to satisfy each otherrequirements and then to solve problems andassume hypothesis as a real team. Unfortunately theactual way of communicating is running the risk toreduce the human contact to simply essentialordered actions like "Please ,fill in the form" for
asking information and "push the bottom" to answer them. When this human kind ofcommunication is applied on a cable(a cable which someone still call "wire")it means we have thepossibility of breaking a banner just starting with a friendly talk to arrange something interestingjust giving suggestions and talking about technical features, power, loudspeakers, applicationconditions like outdoor or indoor installations... Every year, during every shows, it always happenthat customers which could represent NEW contacts visit us to ask for catalogs, price lists,samples and they always checkcables quality just by their flexibility.Reference Lab does not have any todo with this way ofworking...because we are looking fora dialogue with costumers tounderstand and satisfy anyrequirements. Our aim is to get someimportant information from show-visitors like the golden one which is:"What kind of utilisation andapplications are our cablesdestinated to in your companyprojects?" As a matter of fact weconsider the word "application" asthe key-code which makes it possibleto share a growing process whichstarts with the consumersrequirements and finishes at the company production projects. Regarding to this Reference Lab is supposed to get a deeper knowledge of cable technology byorganizing seminaries which take place both at shows (Moscow,) organized by Mr. Wladimir
Sohno of Bayland Music, duringtrainings (Sharjan,) organized by Mr.Vishnu Manghnani in Studio AyoubEssa with his engineers: in Caracas(Venezuela); in Bogotà (Columbia);In Belo Horizonte (Brasil); in Manila(Philippines); in Mumbai (India); inBeijng (China); in Kuala Lumpur(Malaysia) and as sponsor of Clinicsat the Umbria Jazz festival with thecollaboration of Mr. Carlo Pagnotta,Giovanni Tommaso, Larry Monroeand Angelo Tordini, whose purposeis making users understand theimportance of such an accessory asthe cable because it can producevery excellent and best soundresults at the end of an audio
Bogotà
Singapore
Moscow
p.3
system team performance. We absolutely don'twant to strictly criticize this attitude, but we wouldreally like to suggest people to learn analysingcable features as they do with many other audioproducts. The reason is that cables are the moreimportant link between the complete audioequipment and its results from a quality soundpoint of view. Cables make the difference insound! If you think to everyone guitarist or vocalistduring their studio recording job, you'll surelyassociate your idea to the quality results reachedby a good sound crew who works with thesupport of excellent instrumental equipment like
consolle, recorder, processors, microphones. If in that sessionyou'd replace just the guitar and the microphone (vocal) cables andyou'd repeat the performance, you'll be listening to the sound ofthis new track with many big quality differences in comparison withthe past one. We noticed that this improvement of the cableconcept is really welcome all over in the World and someone hasalready expressed his satisfied and positive opinion about whatexcellent results come from a new way of dedicating more time andattention to the choice of a more suitable and low price cable.
I would SINCERELY thank to people and companies which havebeen trusting Reference Lab by investing on our brand, productsand human resources and also all of them who have been testingour products to finally choose them for the qualified sound resultsthey produce. Reference would continue to invest on a developingresearch which is the base of its way of working. ReferenceOrganizer for SOUND CREW is just A LITTLE OBJECT dedicated topeople who both spiritually and practically special great.
Angelo Tordini
Towards a culture of the cablesIn Italy, nine years after its first appearance REFERENCE llaabboorraattoorryy plays now a significantrole on the musical scene thanks to the originality and incisiveness the become naturalcharacteristics of its initiatives.
PRODUCTS conceived and designed by a team of audio engineers. All their experience to find thebrightest answers to the needs of professionals and amateurs, for any application and environment: fromstudio to home recording, broadcasting facilities and TV; from live events to fixed installations and anyother pro-audio task.
ACCESSORIES designed with the needs of musicians and sound engineersin mind. A wide range of tools where even the smallest detail – i.e. theStrapper, the Cable Drum patented is customized to professionals needs,in studio and on the road.
RANGE each model is designed to best meet both mechanical and electrical specifications for aparticular task. The result is a wide range of professional cables for audio (microphone, instrument,speaker, AES-EBU, multicore, AC-line), video and light applications.
Inside Reference
www.referencelaboratory.com
Berklee UJ 07
Berklee UJ o7
Caracas
p.4
FEATURES AND SPECIFICATIONS the manufacturingprocess of each product satisfies the demanding ISO 9002Quality Standard. Every item is tested during production andre-checked before final delivery. NPI and LSZH properties of materials are tested and certified by IMQ.
OXIGEN FREE Reference cables use only pure (99.97%) oxygen-free copper conductors, for premium signal transmission quality and reliability over time.
INNOVATIVE MATERIAL polyurethane, for the first time to improve the cable’s managing in hardcondition (-40/+80°C) then more flexibility, high abrasion hardness, high resistance to mineral oils, highmechanical reliability.
LEADING THE END-USER TO A “CULTURE OF THE CABLE” knowledge is the best tool to makethe right choices. Reference Laboratory introduced the Reference Info Book as a guide to identify thecharacteristics important for specific jobs, together with the general information needed about cables(terminology, & ). A valuable help in a field where the right choice can really make the difference.
RLA “THINKING ABOUT THE APPLICATIONS” it’s the main significant key forReference’s Research and Marketing Development; in fact it was introduced “RLA”(Reference Lab. Application) into this catalogue in order to certificate “ for a specific job”(application) the “right cable” thought an international mentality’s approce on pro audio and M.I.markets.
QUALITYSYSTEMCERTIFICATE
standardISO 9002/EN2902
RLAReference Lab Application
CONDUCTORSTRENGTH
AWG n° Breaking strength [Kg]
14 5616 3618 2320 14,822 9,224 5,726 3,728 2,130 1,432 0,91
SPEAKER CABLE SUGGESTEDCONDUCTOR AREA
Power amp range Cables run
W 5 m 10 m 20 m10-40 1 mm2 1 mm2 1,5 mm2
50-100 1,5 mm2 2 mm2 2,5 mm2100-500 2,5 mm2 4 mm2 4 mm2
500-1000 4 mm2 6 mm2 8 mm2
CONVERSION TABLEAmerican wire gauge (AWG) – mm – mm2
AWG n° Diam, mm Area, mm2 AWG n° Diam, mm Area, mm2
1 7,350 42,429 21 0,7230 0,41062 6,540 33,593 22 0,6440 0,32573 5,827 26,667 23 0,5730 0,25794 5,190 21,156 24 0,5110 0,20515 4,620 16,764 25 0,4550 0,16266 4,110 13,267 26 0,4050 0,12887 3,670 10,578 27 0,3610 0,10248 3,260 8,347 28 0,3210 0,08099 2,910 6,651 29 0,2860 0,0642
10 2,590 5,269 30 0,2540 0,050711 2,300 4,155 31 0,2260 0,040112 2,050 3,301 32 0,2030 0,032413 1,830 2,630 33 0,1800 0,025414 1,630 2,087 34 0,1600 0,020115 1,450 1,651 35 0,1420 0,015816 1,290 1,307 36 0,1270 0,012717 1,150 1,039 37 0,1140 0,010218 1,024 0,824 38 0,1020 0,008219 0,912 0,653 39 0,0890 0,006220 0,812 0,518 40 0,0790 0,0049
O.D.= Overall Diameter • B= Braided • S= Shield
Important cables parameters
Resistance (R)Measured in Ohms/Unit lenght (mt.) theresistance of the conductors is an importantprimary factors to the determination of thesignal carring-capacity of the transmission line.The resistance value is also the ratio of theelectrical resistivity of the conductor material toits physical cross-sectional area.For microphone cable conductor resistancerange: 70-150 Ohm/Km.
Capacitance (C)Measured in picofarad unit length (mt.) andrefers on audio cables, between conductor orconductors and shield. For transmissionapplications is desiderable use cables with low-dielectric-constant materials like proplylene or
cellular polyethylene or polypropylene. Forinstrument cable the range is 70-130 pF/mt.(between conductors).The capacitance varyalso varies with the distance betweenconductors.
Attenuation (Alfa)Mesured indB/Unit lenght (mt.). Attenuationdetermines the transmission level loss of aline. The main factors witch cause attenua-tion are resistive loss in the conductor(mainly due to conductor skin effect at highfrequency) and loss in the dielectric.
InductanceThe inductance of a circuit or an individualconductors may play a part in performance ofa loudspeaker-to-amplifier interconnection or
ground or bonding wire. Straigh forwardformulas have been developed for variousconfigurations. For a pair of conductorsforming a cable (a balanced circuit with sendand return wires), inductance depends onthe spacing between conductors (determi-nate by the isulation thickness), the size ofconductors (determinate by the Gauge andthe length of cable.
L= 0.004( ln(d/r+1/4+d/l)).
L = inductance in microherryl = length of condustors in cm.d = center to center separation of conductorsr = radius of condusctors in centimetersln = natural logarithm.
Inside Reference
www.referencelaboratory.com
p.5
www.referencelaboratory.com
Shields, insulating materials and their properties
BRAIDED A braided shield consists of two groups of thin wires wowen respectively in clockwise andcounterclockwise fashion. The angle between two crossing strands is called the braid angle. Generallyoffers the best high-frequency shielding performance and protection from radio-frequency interference(RFI). This is due to the very high electrical conductivity of the braid, and to its low-inductance, self-shorting configuration. Moreover, the braided construction offers the highest structural integrity, goodflexibility and flex life.
LAP Spiral-wrapped copper serve shields are more inductive than braidedshields, as they resemble a long coil of wire when extended. This cancompromise high-frequency shielding and is not recommended wheneffective shielding above 100 kHz is required. Spiral shields are relativelyinexpensive and easy to terminate, while guaranteeing the highest flexibility.
FOIL SHIELDS Foil-shielded cable is very heavily used for permanentinstallation work and for portable multipaire "snake" cables. The light weightand slim profile makes foil very advantageous in applications involving pullingcable into conduit and permanent installations. The thin mylar/aluminium foilguarantees 100% coverage ratio and offers excellent RFI and EMI shieldingproperties, but is not suited for portable applications due to its shorter flex life.Cables with foil shields generally feature a drain copper wire used toterminate the shield and give extra mechanical strength to the cable.
CONDUCTIVE PLASTICS Cables can feature conductive textile or plasticshields for 100% coverage, with copper drain wires or very low-coveragecopper braid added for ease of termination and low DC resistance. While thistype of construction is very flexible, its shielding effectiveness suffers greatly asfrequency increases, offering very little effect above 10 kHz because of its lowconductivity. Conductive plastic is therefore used in conjunction with traditionalbraided or spiral shields where flexibility should not compromise RFI andhandling noise immunity.
FILLERS, & HANDLING NOISE The audible effect(noise) that causes impact-related "slapping" noise as the cable hits the stage or is stepped upon duringuse is related to capacitance, specifically the change in capacitance that takesplace as the insulation or dielectric is deformed. This causes it to be have as acrude piezoelectric transducer, a relative of an electretcondenser microphone. Handling noise is best addressedby using soft, impact-absorbing insulation and jacketmaterials in a very solid construction with ample cotton orplastic fillers to insure that the cable retains its shape. Tape wrapped around the outer shield greatly enhancessolidness and electrical parameters uniformity along the cable.
INSULATION MATERIALS depending on the specific application cables mightemploy a combination of different insulation materials to meet both electrical (i.e.capacitance) and mechanical (flexibility) demands. PVC, polyethylene (PE), andpolypropylene (PP) are typically used. Reference cables employ special mixturesguaranteeing minimal shrinkage of the insulating sleeves during soldering operations.
INSULATION MATERIALS PROPERTIESPVC PE PP TEFLON POLYURETHANE
Temp. range [°C] -20/80 -50/70 -20/80 -40/200 -40/80Flame resistance Good Poor Poor Excellent PoorWater resistance Good Excellent Excellent Excellent GoodAbrasion resistance Good Fair Good Excellent GoodLow temp. flexibility Fair Excellent Good Excellent GoodSolvent resistance Poor Fair Good Excellent ExcellentMineral oils resistance Poor Poor Poor Good Excellent
# 1 - 1 3 f a m i l y ’ s c a b l e
www.referencelaboratory.com
Applications Quick Guidep.6
GROUP MULTICORE SeriesIndoor Indoor Outdoor Indoor Indoor
Studio wiring Broadcasting OB Van Live fixed install. fixed install.LSZH compliant
#1 RSMO YRSC Y Y Y Y YRSCQ Y Y Y YRSCS Y Y Y Y YRSF Y Y YRSPFWJ Y YRSPFCWJ Y Y Y
#12 RSC/ZH YRSC-S/ZH
GROUP AES-EBU SeriesIndoor Indoor Outdoor Indoor Indoor
Studio wiring Broadcasting OB Van Live fixed install. fixed install.LSZH compliant
#2 RAC01 Y Y Y YRAC02 Y Y Y YRMC08 CP Y Y YRMC10CP Y Y Y YRM/AESEBU/S Y Y Y Y Y
GROUP MICROPHONE Series
M.I. Market Pro Live Studio & Outdoor (*) Indoor fixedBroadcast Delay line installation
#3 RMC01 Y Y YRMC01TW YRMC06 YRMC13 PUR Y YRMC14 YRMC15TP YRMC16TP Y Y YRMLC02 YRMLC03 YRMLC04 YRMLC05 YRMCS01 YRMIC01 YRMIC01 NPI YRMIC02 NPI YRMCQ01 Y YRMCQ02 Y YRMCQ03TP Y
#13 RMIC05 POLYCAB Y
GROUP PATCH Series
Studio Live Installation InternalWiring
#4 RPT01 Y Y YRPF01 Y Y Y YRPF02 Y Y Y YRPF03 Y Y YROPF Y Y YRMIC01 Y
Family’s cables
#1 Multicore #2 AES/EBU-AES/EBU multicore #3 Microphone - Microphone Quad #4 Patch - Installation #5 Instrument - Instrument Quad #6 Speaker flexible #7 Speaker superflexible
#8 Speaker coax and Twin #9 Data control - Dmx - Multicore light
Power cables - Light-nex - Multimedia #10 AC/Line #11 Video - Composite Video #12 Lszh - Security - Ethernet - Fire alarm #13 Policab - Luflex - Polyurethane
p.7
Applications Quick Guide
GROUP INSTRUMENT SeriesM.I. Market Pro Live Studio & Bass Electric Acoutic
Broadcast Guitar Guitar Guitar
#5 RIC01 Y Y Y YRICO2 YRIC05 YRIC09T YRIC-S01 Y Y YRIC01A YRICS01R YRIC QUAD Y YRICT Y YRICTS Y
GROUP SPEAKERS SeriesHi-Fi Market Live Live Live Studio FixedM.I. Market M.I. Pro Line Array Install Inst. LSZH-NP
#8 COAXIAL Y Y Y#7 RPC SUPERLEX Y Y Y
RPC NPI Y YRPCS YRPCM Y Y
#7 RPC MULTISTRAND Y Y YRPC TP Y
#8 RPC TW Y
GROUP DMX Series Live Teather Studio
#9 RDMX01 Y YRDMX01/F Y YRDMX01/SF YRDMX01 PUR YRDMX03 Y Y YRDMX02 SF Y YRDMX04 Y Y Y
GROUP AC/LINE SeriesLive Teather Installation
#10 RPLC SUPERFLEX YRPLC NPI Y Y
#12 RPLC ZH Y YRLC Y
#9 LIGHT NEX Y Y Y
GROUP VIDEO/COMPOSITE VIDEO Series Indoor Outdoor Critical temp Broadcast Assembled
Live Wired
#11 RVC01-02 Y Y YRVC03-05 YRVC50/20 Y Y YRVC06 Y YRVC07 Y YRVC08 Y YRVC09 Y YCOMPOSITE SUPERFLEX PVC Y Y YCOMPOSITE POLIURETHANE Y Y
GROUP MULTIMEDIA CONTROL / SECURITY CONTROL/ FIRE ALARM Series Installation Indoor InstallationOutdoor
#12 RPLC19-NPI Y YRPLC10-NPI Y YRCSRC01-& RCSR02 Y YRFA (all models) Y Y
www.referencelaboratory.com
NOTE: This Quick Guide is a general overview of cable groups. For specific models or and/or standard pleasefollow the data sheet.
APPLICATIONS QUICK GUIDE pag.6
MULTICORE CABLES pag.RSMO series - no isolated balanced pairs 11RSC series - isolated balanced pairs 12RSCS series - isolated balanced + overall screen 13RSCQ serie - quad 14
FOIL MULTICORE CABLES pag.RSF series - pvc each balanced pairs 15RSFQ series - quad with pvc each quad 16RSP F WJ series 17RSP FC WJ series 18
AES EBU MULTICORE CABLES pag.MULTICORE RM/AES/EBU/S series 19RAC series - single balanced 20RMC-CP series - single balanced 21
MICROPHONE & PATCHES CABLES pag.RMC series 22RMLC series 24RMC-TP series - short pitch 25RMC-S series - solid 25RMCQ series - quad 26RMIC series - contractor market 27RPT series - patch cable 28RPF series - foil patch cable 29
INSTRUMENT CABLES pag.RIC series 30RIC-S series - solid 31RIC-A series - for acoustic guitar 32VINTAGE series 32RIC-Q series - quad 33RICT series - twin for stereo keyboards 34RICTS series - twin hi fi market 34RPAV series - unbalanced audio + video 35
SPEAKER CABLES pag. RPC series - no multistrand 36RPC series - multistrand 39RPCS series - overall shield 40RPCM series - twin 41RPCM series - twin hi fi 43RPCTP series - studio short pitch 44
AC LINE COMPOSITE CABLES pag.RPLC series - power + balanced line 47
MULTIMEDIA CONTROL CABLES pag. RPLC series - power + balanced line 48
SECURITY CONTROL CABLES pag. RCSR series - power + video 48
FIRE ALARM CABLES pag.RFA series 49
DMX CABLES pag.DMX series 50RAMX/AC series - colour changer 50
LIGHT CABLES pag.RLC series - multiwires power light 53
LIGHT-nex AC POWER CABLES pag.RLCM-SF series - superflex multiwires 54RLCM-ZH series - multiwires AC Power LSZH 55
VIDEO CABLES pag.RVC series 56
TRIAX series 59RS-VHS series - super VHS - multi minicoax 60RRGB series - multi mini mini coax 60
AUDIO VIDEO SERVICE COMPOSITE CABLES pag.RVAC series - multi coax + power 61RVCC series - composite Report set 62RVC Series - composite cables 63RGB/AC/C Series -coax RGB-Power 64ROB-C Series -Obvan application 67RFCB Series - fisher boom application 68VIC Series - conference room wiring 69
INTERCOM CABLESRCOM series - 4 wires intercom field 69
LSZH CABLES pag. Multicore audio cables series 72Speaker series 73Microphone series 74Video series 75
POLYCAB &POLYURETHANE CABLES pag.RMC series 77RMCQ series 77RIC series 77RDMX series 77
ETHERNET CABLES pag.Cat 5 series 78Cat 6 series 79Live series 79
ASSEMBLED CABLES pag. INSTRUMENT AND PEDAL - RIC series 84INSTRUMENT - RIC-S series 85INSTRUMENT - RIC-A series 86INSTRUMENT - RIC-R series 87INSTRUMENT - RIC-09T/HEAD - CABINET SPEAKER 88MICROPHONE - RMC series 89MICROPHONE - RMC TP series 90MICROPHONE - RMC S series 90MICROPHONE - RMCL series 90DMX/HYBRID - DMX 91SPEAKER - SP series 92SPEAKER - line array series 93SPEAKER MULTISTRAND - line array series 94SPEAKER - for active Louspeakers - AC + Audio 95
CABLE DRUMS pag. CABLE DURMS - RDC series - RDQC series 98BOX&PANEL 99CUSTOM SOLUTION - example of assembled Drums 100ACCESSORIES FOR CABLE DRUMS - soft cover 103EMPTY BOX AND PANELS - Reference full line 104
DISPLAY STAND pag. FAI DA TE display stand 105PENGUIN STAND 105MICROSONIC universal monitor epic series 105
DI BOX pag. PASSIVE DI BOX 106ACTIVE DI BOX 107PHANTOM POWER SUPPLY 107
AUDIO CONNECTOR pag. CIRCULAR MULTIPIN - bayonet from 13 to 150 pins 108SPEAKER LIGHT - 19PIN Socapex compatible 110XLR - Male female with jaws 111ADAPTER - audio and DMX 111CHASSIS XLR 112PHONE PLUG - panel and fly RCA pin 112PHONE PLUG TM Series - jacks 1/4 113
www.referencelaboratory.com
p.8
Index
BULK CABLES
CA
BLE
S MADE IN ITA
LY
RLARefe
rence
Lab A
pplicatio
n
www.referencelaboratory.com
The Multicore cables familythe widest range to fit all the applications in LIVE and PRO AUDIO
p.10
Theatre & Studio Fixed Installation
QUALITYSYSTEMCERTIFICATE
standardISO 9002/EN2902
pairs4-6-8-10-12-16-20-24-28-32-36-40-48-56
RSPFWJ Series
Theatre & Studio Fixed Installation
pairs6-8-12-16-24-32-36-40-48-56
RSPFC WJ Series
Live Application
pairs4-8-12-16-25-33-40-48
RSMO Series
Broadcast/Live StudioTV & Fixed Installation
pairs4-8-12-16-24-32-40-48-52
RSF Series
Live & Studio Installation
pairs4-8-12-16-25-33
RSCS Series
Live & Studio Installation
pairs4-6-8-10-12-16-20-24-28-32-36-40-48-56
RSC Series
Fixed Installation Series LSZH tested by *
pairs4-8-12-16-25-33-56
RSCS ZH Series
Fixed Installation Series LSZH tested by *
pairs4-8-12-16-25-33-40-48
RSC ZH Series
Studio Installarion 110 Ω
pairs4-8-12-16-25-33
RMAESEBU Series
Live & Studio Installation
pairs4-8-12-16-25
RSCQ Series
Studio Installation
pairs12
RFL Series
Brown
Green
GreenOrange
35BrownGrey
BrownGrey
45
1920
BlueOrange
12
42
363738394041
434445464748
Green
Blue
BrownGreyBlue
OrangeGreen
Brown
Brown
Grey
Green
BlueOrangeGreenBrownGreyBlue
OrangeGreenBrownGreyBlue
Orange
p.11
www.referencelaboratory.com
The RSMO Series of multichannel microphone cables provides a combination of thin profile, excellent flexibility,and high noise-rejection twisted pairs braided bare copper screened common shield. Overall cotton fillerswrapped in a tight spiral fashion provide extra compactness and uniform electrical and mechanical parametersalong the cable. RSMO cables are intended for microphone and line level signals and suited for both indoor andoutdoor applications. Typical applications: on stage and live sound reinforcement with central grounding.
MULTICORE ccaabblleess RSMO series#1
CONSTRUCTION and ORDERING CodesSuffix
RSMO 4,8,12,16,25,33,40,48 100m and multiples Bk (black)Pairs Reel Colour
ELECTRICALCapacitance cond/cond 70.65 [pF/m]Capacitance cond/screen 112 [pF/m]Cond. D.C.R. 0.088 [Ω/m]Screen type (each pair) Red copper (braided 80%)Shield D.C.R. 0.05 [Ω/m]Nom. Impedance 65 [Ω]Working temp. range -30 / +70 [°C]
3
67891011121314151617
18
2122232425262728293031323334
Black
CORE N° PAIR COLOUR PAIR COLOURCORE N° CORE N°
R E F E R E N C E • R S M O 2 5
Minimum bending radius = 15x Overall Diameter
Red
WhiteYellow
Pink
Purple
Green WhiteGreen WhiteGreen White
GreyBlue
OrangeGreenBrownGreyBlue
OrangeGreen
GreyBlue
OrangeBlue
OrangeGreen
Green White
Green WhiteBlack WhiteBlack WhiteBlack WhiteBlack WhiteBlack WhiteBlue WhiteBlue WhiteBlue WhiteBlue WhiteBlue WhiteBlue WhiteBlue WhiteBlue White
PAIR COLOUR
Yellow
MECHANICAL / PHYSICAL
MODEL Pairs AWG #Strand
Area [mm2]RSMO 4 4 6 0.07 RSMO 8 8 10 0.10RSMO 12 12 12 0.19RSMO 16 16 14 0.24RSMO 25 25 16 0.34RSMO 33 33 18 0.43RSMO 40 40 20.00 0.49RSMO 48 48 25.00 0.56
O.D.[mm]
Ch. O.D. [mm]Insulation type
O.D. incl. screen [mm]
Weight[Kg/Mt]
AWG 26 18/0.10
0.14(tinnedcopper)
1.0PVC2.2
Grey
The RSC Series of multichannel microphone cables offers a combination of thin profile, excellent flexibility, andvery high noise-rejection. RSC cables are intended for microphone and line level signals and suited for bothindoor and outdoor applications. Channel pairs are individually shielded and insulated with a special PVC jacket.Each pair features a drain wire for a faster and easier connection. Three identification codes guarantee safe ‘lastminute’ installations: pair colour, single conductor colour, and pair-jacket ID-number. TNT tape gives extrasolidness to the cable structure and contributes to have constant capacity figures along the cable even under“heavy handling” situations.Typical applications: studio installation, mobile units and outdoor broadcasting, sound reinforcement and live events.
www.referencelaboratory.com
MULTICORE ccaabblleessRSC series
p.12
#1
R E F E R E N C E • R S C 2 5
CONSTRUCTION and ORDERING CodesSuffix
RSC 2,4,6,8,12,16,20,25 100m and multiples Bk (black)33,36,40,48,56
Pairs Reel Colour
ELECTRICALCapacitance cond/cond 80 [pF/m]Capacitance cond/screen 150 [pF/m]Cond. D.C.R. 0.083 [Ω/m]Screen type (each pair) Tinned copper (lap 85%)Shield D.C.R. 0.04 [Ω/m]Nom. Impedance 75 [Ω]Attenuation @ 1MHz 2.1 [dB/100m]Working temp. range -15 / +70 [°C]
123456789101112131415
BrownRed
OrangeYellowGreenBlue
PurpleGreyWhiteBlackBrownRed
OrangeYellowGreen
16 Blue
PurpleGreyWhiteBlackBrownRed
OrangeYellowGreenBlue
PurpleGreyWhiteBlackBrownRed
OrangeYellowGreenBlue
PurpleGreyWhiteBlackBrownRed
OrangeYellowGreenBlue
Purple
same above Brown
17181920212223242526272829303132
33343536373839404142434445464748
49/56
Grey
Orange
Orange
Grey
Red
White
Yellow
CORE N° POSITIVE WIRECOLOURS
CORE JACKETCOLOURS CORE N° POSITIVE WIRE
COLOURSCORE JACKET
COLOURS CORE N° POSITIVE WIRECOLOURS
CORE JACKETCOLOURS
Minimum bending radius = 20x Overall Diameter
RSC 2 2 8,2 0,08RSC 4 4 9 0,097RSC 6 6 10 0,102RSC 8 8 11,2 0,249RSC 12 12 15,5 0,284RSC 16 16 16,8 0,392RSC 20 20 19,4 0,600RSC 25 25 21,5 0,620RSC 33 33 23 0,749RSC 36 36 24 0,820RSC 40 40 25,2 0,908RSC 48 48 28,50 1,081RSC 56 56 32,6 1,270
MECHANICAL / PHYSICAL
MODEL PairsAWG #Strand
Area [mm2]O.D.[mm]
Ch. O.D. [mm]/ insul.typePair O.D. [mm]/insul. type
Weight[Kg/Mt]
Channel Drain wire
1.0 / PE2.5 / PVC
AWG 24 28/0.10
0.22(Red
copper)
AWG 24 7/0.180.20
(tinnedcopper)
p.13
www.referencelaboratory.com
The RSCS Series of multicore microphone cables offers a combination of thin profile, excellent flexibility, and very a highnoise-rejection. RSCS cables are intended for both microphone and line level signals and they can be used withconfidence both indoor and outdoor. Channel pairs are individually shielded and insulated with a special PVC jacket. Adrain wire is provided for each pair for fast and easy connections. TNT tape gives extra solidness to the cable structureand contributes to have constant capacity figures along the cable, while preventing pair twisting over time. The overallbraided shield gives a superior noise immunity creating a second barrier to the external interference. Three identificationcodes gives extra confidence in ‘last minute’ installations: pair colour, single conductor colour, and pair-jacket ID-number.Typical applications: studio installation, mobile units and outdoor broadcasting, sound reinforcement and live events.
MULTICORE ccaabblleess RSCS series#1
R E F E R E N C E • R S C S 2 5
ELECTRICALCapacitance cond/cond 80 [pF/m]Capacitance cond/screen 150 [pF/m]Cond. D.C.R. 0.083 [Ω/m]Screen type (overall) Tinned copper (braided 80%)Screen type (each pair) Tinned copper (lap 85%)Shield D.C.R. 0.04 [Ω/m]Nom. Impedance 75 [Ω]Attenuation @ 1MHz 2.1 [dB/100m]Working temp. range -15 / +70 [°C]
CONSTRUCTION and ORDERING CodesSuffix
RSCS 4,8,12,16,25,33 100m and multiples Bk (black)Pairs Reel Colour
RSCS 4 4 9,80 0,125RSCS 8 8 13,80 0,247RSCS 12 12 16,50 0,329RSCS 16 16 16,70 0,397RSCS 25 25 21,50 0,582RSCS 33 33 24 0,779
MECHANICAL / PHYSICAL
MODEL PairsAWG #Strand
Area [mm2]O.D.[mm]
Ch. O.D. [mm]/ insul.typePair O.D. [mm]/insul. type
Weight[Kg/Mt]
Channel Drain wire
1.0 / PE2.5 / PVC
123456789101112131415
BrownRed
OrangeYellowGreenBlue
PurpleGreyWhiteBlackBrownRed
OrangeYellowGreen
16 Blue
PurpleGreyWhiteBlackBrownRed
OrangeYellowGreenBlue
PurpleGreyWhiteBlackBrownRed
OrangeYellowGreenBlue
PurpleGreyWhiteBlackBrownRed
OrangeYellowGreenBlue
PurpleGrey
17181920212223242526272829303132
33343536373839404142434445464748
Grey
Orange
Orange
Grey
Red
White
Yellow
CORE N° POSITIVE WIRECOLOURS
CORE JACKETCOLOURS CORE N° POSITIVE WIRE
COLOURSCORE JACKET
COLOURS CORE N° POSITIVE WIRECOLOURS
CORE JACKETCOLOURS
AWG 24 28/0.10
0.22(tinnedcopper)
AWG 24 7/0.180.20
(tinnedcopper)
Minimum bending radius = 20x Overall Diameter
The RSCQ Series is the excellent solution for professional application. It is a combination of thin profile,excellent flexibility have very high noise-rejection and suited for both indoor and outdoor applications. Channelpairs are individually shielded and insulated with a special PVC jacket. This four-conductor-shieldedconfiguration can best be thought of as two twisted pairs twisted together an is very popular in applications suchas television production,where huge amounts of power cable for lighting and camera equipment surround theperformer. The quad reduce the electromagnetic interference (EMI) is improved by a factor of ten (20 dB). Typical applications: studio installation, mobile units and outdoor broadcasting.
www.referencelaboratory.com
QUAD MULTICORE ccaabblleessRSCQ series
p.14
#1
ELECTRICALCapacitance cond/cond 63 [pF/m]Capacitance cond/screen 107 [pF/m]Cond. D.C.R. 0.083 [Ω/m]Screen type (each pair) Bare copper braidShield D.C.R. 0.04 [Ω/m]Nom. Impedance 80 [Ω]Inductance 06mH/kmWorking temp. range -40 / +80 [°C]
CONSTRUCTION and ORDERING CodesSuffix
RSCQ 12 100m and multiples Bk (black)Pairs Reel Colour
RSCQ 12 18 0,11
MECHANICAL / PHYSICAL
MODEL AWG #Strand
Area [mm2]O.D.[mm]
Ch. O.D. [mm]/ insul.typePair O.D. [mm]/insul. type
Weight[Kg/Mt]
Channel Shield
1.0 / XLPE3.2 / PVC
AWG 24 18/0.10
0.22(tinnedcopper)
BareCopperBraid
Minimum bending radius = 22x Overall Diameter
p.15
www.referencelaboratory.com
The RSF Series of multichannel microphone cables provides a combination of thin profile, excellent flexibility, and verylow noise-rejection figures. They are intended for microphone and line level signals and suited for both indoor andoutdoor applications. RSF multichannel cables are composed of foil screened twisted pairs with an individual PVCouter jacket for those applications where mechanical robustness is at premium. TNT tape gives extra solidity to thecable and contributes to have a constant capacity figure along the cable, while maintaining the round shape of thecable over time. Pair jackets have individual ID-numbers printed on. Foil screen can be easily removed and each pairalso has a highly conductive stranded drain wire for easier screen termination and on the fly soldering operations.Individually shielded and insulated pairs.Typical applications: Studio installation, Theatre installation, Broadcasting mobile unit wiring, Conference roominstallation, Church installation.
MULTICORE ccaabblleess W/JACKET & FOIL
RSF series#1
R E F E R E N C E • R S F 1 2
RSF 04 4 9 0,086RSF 08 8 11,8 0,160RSF 12 12 15 0,223RSF 16 16 17,5 0,334RSF 24 24 21,6 0,451RSF 32 32 22,7 0,575RSF 40 40 24,5 0,680RSF 48 48 27,5 0,831RSF 52 52 31 1,100
CONSTRUCTION and ORDERING CodesSuffix
RSF 4,8,12,16,24,32,40,48,52 100m GN(green) and BK(black)Pairs Reel Colour
ELECTRICALCapacitance cond/cond 120 [pF/m]Capacitance cond/screen 360 [pF/m]Cond. D.C.R. 0.09 [Ω/m]Screen type (each pair) Al-My foil (100%)Shield D.C.R. 0.04 [Ω/m]Nom. Impedance 55 [Ω]Attenuation @ 1MHz 2.1[dB/100m]Working temp. range -30 / +70 [°C]
MECHANICAL / PHYSICAL
MODEL PairsAWG #Strand
Area [mm2]O.D.[mm]
Ch. O.D. [mm]/ insul.typePair O.D. [mm]/insul. type
Weight[Kg/Mt]
Channel Drain wire
1.0 / PP2.7 / PVC
AWG 26 18/0.10
0.22(red
copper)
AWG 24 7/0.180.22
(tinnedcopper)
Minimum bending radius = 20x Overall Diameter
MODEL RSF12L - MECHANICAL/PHYSICALInner Conductor
Insulation
Color conductor
Core arrangement
Drain Wire
Pair Shield
Pair jacket
Tape
Jacket
Weight
Bare Copper 28x0,10 mm cross section 0,22mm2
Polyolephine Ø=1,00 mm
Natural/Red
2 conductors twisted in pairs
Tinned Copper7x0,18 mm
Blu Alu Foil coverage 100%
Grey flexible PVC
Non wovens under jacket
Black Flexible PVC Ø=12,80 mm
180 Kg/Km
RSF-L is a version of RSF family with polyolephine insulation for have bestperformance with less overall diameter
RSF 12 L
The RFQ Series is the excellent solution for professional application. It is a combination of thin profile, excellentflexibility have very high noise-rejection and suited for fixed installation Channel pairs are individually shieldedand insulated with a special PVC jacket. This four-conductor-shielded configuration can best be thought of astwo twisted pairs twisted together an is very popular in applications such as television production,where hugeamounts of power cable for lighting and camera equipment surround the performer. The quad reduce theelectromagnetic interference (EMI) is improved by a factor of ten (20 dB).Typical applications: studio installation, broadcasting studio installation, OB van wiring.
www.referencelaboratory.com
QUAD MULTICORE ccaabblleessRSFQ series
p.16
#1
ELECTRICALCapacitance cond/cond 63 [pF/m]Capacitance cond/screen 107 [pF/m]Cond. D.C.R. 0.083 [Ω/m]Screen type (each pair) Blu alu-foil coverage 100%Isulation resistence >100MOhm/KmNom. Impedance 80 [Ω]Inductance 06mH/kmWorking temp. range -40 / +80 [°C]
CONSTRUCTION and ORDERING CodesSuffix
RSFQ 12 100m and multiples Bk (black)Pairs Reel Colour
RSFQ 12 17 0,021
MECHANICAL / PHYSICAL
MODEL AWG # StrandArea [mm2]
O.D.[mm]
Ch. O.D. [mm]/ insul.typePair O.D. [mm]/insul. type
Weight[Kg/Mt]
Channel Shield
1.0 / XLPE3.2 / PVC
AWG 24 18/0.10
0.22(tinnedcopper)
ALU-FOIL
Minimum bending radius = 20x Overall Diameter
p.17
www.referencelaboratory.com
The RSPFWJ Series of multichannel microphone cables provides a combination of very thin profile, excellent flexibility,and very high noise-immunity. They are intended for microphone and line level signals and suited for both indoor andoutdoor installations. RSFPWJ multichannel cables feature individually foil(blue finish) FREE EDGE screened twistedpairs. Foil screen can be easily removed and each pair also has a highly conductive stranded drain wire for screentermination and easier last-minute soldering operations. TNT tape gives extra solidity to the cable and contributes tohave a constant capacity figure along the cable, while maintaining cable roundness over time.Individually shielded pairsTypical applications: Studio wiring, Theatre wiring, Broadcasting mobile unit wiring, Conference room wiring.
MULTICORE ccaabblleessW/O JACKET & FREE EDGE
RSP F WJ series#1
CONSTRUCTION and ORDERING CodesSuffix
RSP F WJ 4,6,8,10,12,16,20,24,28, 100m and multiples, Bk (black), Gr (grey)32,36,40,48,56 max 600mt
Pairs Reel Colour
RSPFWJ 4 4 8 0.071 RSPFWJ 6 6 9.2 0.105RSPFWJ 8 8 9.9 0.118RSPFWJ 10 10 11.5 0.160RSPFWJ 12 12 11.5 0.162RSPFWJ 16 16 13.6 0.236RSPFWJ 20 20 15 0.290RSPFWJ 24 24 15.7 0.312RSPFWJ 28 28 18.2 0.390RSPFWJ 32 32 18.5 0.384RSPFWJ 36 36 19.7 0.465RSPFWJ 40 40 20.3 0.543RSPFWJ 48 48 22 0.595RSPFWJ 56 56 23.5 0.680
ELECTRICALCapacitance cond/cond 95 [pF/m]Capacitance cond/screen 180 [pF/m]Cond. D.C.R. 0.09 [Ω/m]Insul./Screen type (each pair) My-Al-My foil (100%)Shield D.C.R. 0.04 [Ω/m]Nom. Impedance 70 [Ω]Attenuation @ 1MHz 2.1[dB/100m]Working temp. range -30 / +70 [°C]
MECHANICAL / PHYSICAL
MODEL Pairs AWG # StrandArea [mm2] O.D.
[mm]Ch. O.D. [mm]/ insul.type
Pair O.D. [mm]/screen-insul. typeWeight[Kg/Mt]
Channel Drain wire
1.1 / PE2.3 / My-Al-My
PVC
123456789101112131415
BlueOrangeGreenBrownGreyBlue
OrangeGreenBrownGreyBlue
OrangeGreenBrownGrey
Black
Purple
RedBlackYellowPurplePinkBlackYellowPurplePink
YellowPurplePink
Purple
161718192021222324252627282930
3334
3132
3536373839404142434445
BlueOrangeGreenBrownGreyBlue
OrangeGreenBrownGreyBlue
OrangeGreenBrownGrey
CORE N° PAIR COLOURS CORE N° PAIR COLOURS CORE N° PAIR COLOURS
BlueOrangeGreenBrownGreyWhiteRed
BlackYellowPurplePink
4647484950515253545556
CORE N° PAIR COLOURS
Red
White
Black Pink
Purple
Yellow
Red
White
White
Black
YellowPink
Transparent
AWG 24 7/0.200.22
(tinnedcopper)
AWG 24 7/0.200.22
(tinnedcopper)
A cable series featuring very thin profile, excellent flexibility, and high noise-immunity. Intended for microphone and linelevel signals and suited for both indoor and outdoor installations. Pairs are individually foil (gold finish) screened. Foilscreen can be easily removed and each pair also has a highly conductive stranded drain wire for screen terminationand easier last-minute soldering operations. TNT tape gives extra solidity to the cable and contributes to have aconstant capacity figure along the cable, while maintaining cable roundness over time.Typical applications: Studio wiring, Theatre wiring, Broadcasting studio wiring, Conference room wiring, fixedinstallation wiring. Mobile units wiring.
www.referencelaboratory.com
MULTICORE ccaabblleessFOIL
RSP FC WJ series
p.18
#1
RSP FC WJ 6 6 9,60 0,115RSP FC WJ 8 8 10,20 0,132RSP FC WJ 12 12 11,60 0,172RSP FC WJ 16 16 13,00 0,218RSP FC WJ 24 24 15,00 0,291RSP FC WJ 32 32 16,60 0,361RSP FC WJ 36 36 19,50 0,408RSP FC WJ 40 40 17,80 0,418RSP FC WJ 48 48 22,30 0,487RSP FC WJ 56 56 25,30 0,575
ELECTRICALCapacitance cond/cond 52 [pF/m]Capacitance cond/screen 89 [pF/m]Cond. D.C.R. <0.128 [Ω/Km]Insul./Screen type (each pair) Al-PE foil (100%)Insulation resistance >10000 [MΩ/km]Working temp. range -30 / +70 [°C]
MECHANICAL / PHYSICAL
MODEL Pairs AWG # StrandArea [mm2]
O.D.[mm]
Cond. insul.type Pair screen- type
Outer jacket insul. type
Weight[Kg/Mt]
Channel Drain wire
XPLEAl-PE
TNT tape + PVC
CONSTRUCTION and ORDERING CodesSuffix
RSP FC WJ 6,8,12,16,24,32,36, 100m and multiples, Bk (black)40,48,56 max 600mt
Pairs Reel Colour
AWG24
7/0.200.22(bare
copper)
AWG24
7/0.200.22
(tinnedcopper)
R E F E R E N C E • R S P F C W J 0 8
Minimum bending radius = 25x Overall Diameter
123456789101112131415
BlueOrangeGreenBrownGreyBlue
OrangeGreenBrownGreyBlue
OrangeGreenBrownGrey
Black
Purple
RedBlackYellowPurplePinkBlackYellowPurplePink
YellowPurplePink
Purple
161718192021222324252627282930
3334
3132
3536373839404142434445
BlueOrangeGreenBrownGreyBlue
OrangeGreenBrownGreyBlue
OrangeGreenBrownGrey
CORE N° PAIR COLOURS CORE N° PAIR COLOURS CORE N° PAIR COLOURS
BlueOrangeGreenBrownGreyWhiteRed
BlackYellowPurplePink
4647484950515253545556
CORE N° PAIR COLOURS
Red
White
Black Pink
Purple
Yellow
Red
White
White
Black
YellowPink
Transparent
p.19
www.referencelaboratory.com
The multicore RM/AESEBU/S series is a new 110 Ohm balanced audio cable designed for digital audio datatransmission over AES-EBU standard. Relevant attention has been paid to the electrical/mechanical characteristics toensure that signal remain error free even in long distance.The special formula of the jacket material guarantees anoutstanding flexibility even under critical working conditions, such as during on-location recording and live events.Typical applications: Recording Studio, Broadcasting ,TV and Conference room wiring.
AES-EBU MULTICORE ccaabblleess RM/AESEBU/Sseries #2
ELECTRICALCapacitance cond/cond 44 [pF/m]Capacitance cond/screen 68 [pF/m]Screen type (each pair) ALU FOIL coverage 100%Shield D.C.R. na [Ω/m]Nom. Impedance 110 [Ω]Attenuation @ 1MHz < 2 [dB/100m]Inductance <0,06mH/MtWorking temp. range -40 / +80 [°C]
CONSTRUCTION and ORDERING CodesSuffix
RM/AESEBU/S 4,8,12,16,20 100m Bk (black)Pairs Reel Colour
RM/AESEBU/S12 14 0,27
MECHANICAL / PHYSICAL
MODEL AWG # StrandArea [mm2]
O.D.[mm]
Ch. O.D. [mm]/ insul.typePair O.D. [mm]/insul. type
Weight[Kg/Mt]
Channel Drain wire
1.1 / PE3.5 / PVC
AWG 24 28/0.10
0.22(bare
copper)
AWG 22 7/0.180.33
(tinnedcopper)
Minimum bending radius = 20x Overall Diameter
The RAC series is a family of 2-conductor-plus-screen cables designed for digital audio data transmission using AES-EBU standard. RAC01 features high density lap shield and provide superior hum and RFI rejection. Cotton fillersmaintains tight bundles and reduces shift and twist. The special formula of the jacket material guarantees anoutstanding flexibility even under critical working conditions, such as during on-location recording and outdoor liveevents.RAC02 features a the braided-plus-foil shield that makes it the best choice where superior EMI interferenceimmunity is mandatory, such as OB vans units and recording studios. Typical applications: Studio installation, Broadcasting and mobile units, Conference room installations.
www.referencelaboratory.com
AES-EBU ccaabblleessRAC series
p.20
#2
RAC-01 4 6RAC-02 4 6,9
Weight (kg/100m) Nominal diameter (mm)
CONSTRUCTION and ORDERING Codesmodel
RAC 01 1 100m Gr (grey)RAC 02 1 100m Bk (black)
Pairs Reel Colour
MODELSHIPPING INFORMATION
SPECIFICATIONS RAC 01 RAC 02Pair construction 11 x 0.20 (AWG22) 19 x 0.15 (AWG22)Pair insulation PE PEScreen type Double lap, 100% coverage (red copper) Braided tinned copper + Al/My foilOuter jacket PVC PVCCapacitance cond/cond (pF/m) 46 43Capacitance cond/screen (pF/m) 79 85Nom. D.C.R. (Ω/m) 0,052 0,050Shield D.C.R. (Ω/m) 0,014 0,013Nom. Impedance (Ω) 110 110Working temp °C -30 / +70 -30 / +70
Minimum bending radius = 15x Overall Diameter
R E F E R E N C E • R A C 0 2
RAC 01
RAC 02
p.21
www.referencelaboratory.com
AES-EBU ccaabblleess RMC CPCLASSIC PERFORMANCE
RAC series#2
The RMC08 CP (Classic Performances) series is a family of two conductors twisted pairs plus semi-conductive thermoplastic Jacket and braid red copper screen. This semiconductive thermoplasticJacket is a new solution to provide for high isolation/interference protection from outside noise. It is designed for digital audio transmission using AES/EBU standard. Its construction mechanicaland electric is to support specifically the stress in the daily live applications.Typical application: Studio,TV live, Broadcast, data transmission.
R E F E R E N C E • R M C 0 8 D W C P
The RMC10 CP (Classic Performance) series is a twisted two conductors pair plus drain wire and very tight braidedtinned copper shield. Its electric design is to allow at lower capacity value the best live performance applications. Largest overall diameter respect 08 series with superflex PVC Jacket. It is designed for digital audio transmissionusing AES/EBU standard. Typical applications: Pro Audio Live event.
SPECIFICATIONS
RMC 08 B CP RMC 10 CPCapacitance <60[pF/m] 42[pF/m]Screen type Semiconductive thermoplastic sheath Braid Tinned Copper
+Braided red copper screen(>85%)Nom. Impedance 110 [Ω] 110 [Ω]Working temp. range -20/+70[°C] -20/+70[°C]AWG # ; Area [mm2] AWG 24: 0,185 2X(28/0.10)twisted pair AWG 24: 28x0.10 Qty /mm (red copper) (red copper)O.D. [mm] 5.50 6.30Ch. O.D. [mm]/ insul.type 1.2/PP PVC 1.45 PVCOuter jacket insul. type PVCWeight [Kg/100Mt]3,8 [Kg/100Mt]5,5
CONSTRUCTION and ORDERING CodesModel
RMC 08 B CP 1 100m Bk(Black)RMC 10 CP 1 100m Bk(Black)
Pairs Reel Colour
Minimum bending radius = 15x Overall Diameter
RMC08 DW
RMC10 CP
www.referencelaboratory.com
MICROPHONES ccaabblleessRMC series
p.22
#3
The RMC series is a family of traditional two-conductor microphone cables designed for general audioapplications. These cables feature high density shields providing superior hum and RFI rejectionfigures. The special formula used for the jackets materials guarantees an outstanding flexibility evenunder critical conditions, like during on-location recording and live events.Typical applications: Microphone cable, Patch cable, XLR extension cable, Line cable, Intercomconnections.
CONSTRUCTION / MECHANICALModel
RMC 01 AWG 20 ; 0,50 PE + cotton fillers Double lap 100%2x(28x0,15) red copper (red copper)
RMC 01-TW AWG 20 ; 0,50 PE + cotton fillers Double lap 100% 2x(28x0,15) red copper (red copper)
RMC 06 AWG 24 ; 0,22 PE + cotton fillers Braid2x(28x0,10) red copper (tinned copper)
RMC 07 AWG 22 ; 0,32 PE + cotton fillers Braid (36x0,10) red copper + drain wire (tinned copper)
RMC 13 PUR AWG 22 ; 0,34 Polyolephine+Kevlar Braid+foil+drinewire2x(19x0,15) red copper (tinned copper)
RMC 14 AWG 23 ; 0,22 Polyolephine fillers Braid2x(28x0,10) red copper (red copper)
AWG # ; Area [mm2]Strand Insulation material Shield
RM
C 0
1 TW
RM
C 1
3 P
UR
RM
C 1
4
RM
C 0
7TW
RM
C 0
1
RM
C 0
6
RE
FE
RE
NC
E •
RM
C 0
6
RE
FE
RE
NC
E •
RM
C 1
3P
UR
RE
FE
RE
NC
E •
RM
C 1
4
p.23
www.referencelaboratory.com
RMC series#3
RMC 01 0,0364 56 96 0,03 0,6 90 >8000RMC 01 TW 0,0364 56 96 0,03 0,6 90 >8000RMC 06 0,028 50 9100 0,03 0,7 120 >8000RMC 07 TW 0,0637 47 80 0,03 0,6 110 >9000RMC 13 Pur 0,056 55 94 0,018 0,6 90 >7000RMC 14 0,084 47 80 NA NA 110 >7000
CONSTRUCTION and ORDERING CodesModel Reel lenght Colours
RMC 01RMC 01 TW RMC 06RMC 07 TWRMC 13 purRMC 14
Bk (black)Bk (black), Bk/Bl (black/blue), Bk/Re (black/red)Bk (black)Bk (black), Bk/Bl (black/blue), Bk/Re (black/red)Bk (black)Bk (black)
100 m
ELECTRICALCond.D.C.R.[ΩΩ/m]
Cap.cond/cond
[pF/m]
Cap.cond/shield
[pF/m]
ScreenD.C.R.[ΩΩ/m]
Inductance[mH/Km]
Nom.Impedance
[ΩΩ]
Insulationresistance[MΩΩ/Km]
Super Flex PVC 6,5 5 -25 / +70
Super Flex PVC + 6,8 6,3 -25 / +70overall tweed fabricFlex PVC 7 6,7 -25 / +70
Antistatic PVC 6,5 6,8 -25 / +70
e Polyurethane 32N/mmq 6 4,64 -40 / +80
Super Flex PVC 5,80 4,3 -25 / +70
Jacket materialOverall
diam[mm]Weight
[Kg/100Mt]Working temp
[°C]
MODEL
Minimum bending radius = 10x Overall Diameter
MICROPHONES ccaabblleess
www.referencelaboratory.com
MICROPHONES ccaabblleessRMCL series
p.24
#3
The RMLC is a standard microphone cable series designed for general audio applications. A specialinsulating material guarantees an outstanding flexibility, even under extreme environmental conditions,as during on-location recording and live events. RMLC series adds a superior sonic quality to theabove features, thanks to the high quality and cost-effective optimised construction process: lowercapacity with improved flexibility and mechanical reliability over time!Typical applications: microphone and patch connections, XLR extension cable, Line levelconnections, Intercom connections.
CONSTRUCTION and ORDERING CodesModel Reel lenght Colours Weight Kg/100Mt
RMLC 02RMLC 03 RMLC 04RMLC 05
Bk (black) 4,3Bk (black) 4,4Bk (black) 4,4Bk (black) 4,6
100 m
CONSTRUCTION / MECHANICALModel AWG # ; Area [mm2]
Strand Insulation material Shield
RMLC 04
RMLC 05
RMLC 02
RMLC 03
Minimum bending radius = 10x Overall Diameter
ELECTRICALCond. D.C.R.
[ΩΩ/m]
0,085
0,085
0,085
0,085
Model
RMLC 02
RMLC 03
RMLC 04
RMLC 05
56
55
64
58
98
85
109
91
0,7
0,6
NA
NA
Flex PVC
Superflex PVC
Flex PVC
Flex PVC
5.80
6.20
6.0
6.10
>10000
>10000
>10000
>7000
Cap. cond/cond[pF/m]
Cap. cond/shield[pF/m]
Inductance[mH/Km] JACKET O.D.
Insulationresistance[MΩΩ/Km]
RMLC 02 AWG 24 ; 0,22 PE Braidred copper (red copper)
RMLC 03 AWG 24 ; 0,22 Polyolephine Lap red copper (inend copper)
RMLC 04 AWG 24 ; 0,22 Polyolephine Lapred copper + drain wire (tinned copper)
RMLC 05 AWG 24 ; 0,22 PE Braid red copper (tinned copper)
TP
Innovative microphones serie for two models with shorter twist pitch (TP) with “Hi Braid Coverage & HiStanding Angle”. Long distanceBenefit: better conducibility and less HF attenuation.Typical Applications: Pro Audio “LIVE” & “STUDIO”
Typical Applications: Pro Audio “LIVE” & “STUDIO” longest distances/long lifetime
ELECTRIC CHARACTERISTIC
Cond.Ohm resistanceInsulation resistance at 20°CCapacitance Cond/cond. Capacitance Cond/shield Twist pitch TPTemperature range
>134 Ohm/Km>10.000Mohm*Km66 pF/m104 pF/m18 mm-25°C/+70°C
CONSTRUCTION 2x0,14
Inner conductorInsulationCore arrang.Tape ShieldJacketWeight
Bare Copper Cross Section 0,14 mm2Polyolephine Ø=1,00mm nat/red2 Twisted conductors with fillersNon wovensTinned Copper Braid coverage>90%Super flex PVC Ø=4,60mm Black37 Kg/Km
COLOURand PACKAGE
100mt
Reel
ColourBlack/Grey
p.25
www.referencelaboratory.com
MICROPHONES ccaabblleess RMC-TP series#3
MICROPHONES ccaabblleess RMC-S series#3
Inner conductor Solid bare copper AW20Insulation Foam PE 2,30mm
Filler PolyprophileneShield 1 Semiconductor tapeShield 2 Tinned copper braidJacket Black PVC superflex 0,77mm
Cond/Cond resistance < 0,004 Ohm/MtInsulation resistance < 10000MOhm/KmTemperature range -25 / +70 [°C]
Overall diameter 6.80mm
The RMC-S is a solid copper microphone cable designed for HI-End pro audio applications. A specialinsulating material guarantees an outstanding flexibility, even under extreme environmental conditions,as during on-location recording. RMC-S series adds a superior sonic quality to the above features,thanks to the solid technology.Typical applications: HI-End Pro audio, Studio applications.
CONSTRUCTION / MECHANICAL and ELECTRIC CHARACTERISTIC
RMC-S01
RMC15 TP
RMC16 TP
ELECTRIC CHARACTERISTIC
Cond.Ohm resistanceInsulation resistance at 20°CCapacitance Cond/cond. Capacitance Cond/shield Twist pitch TPTemperature range
>56 Ohm/Km>10.000Mohm*Km67 pF/m106 pF/m20 mm-25°C/+70°C
CONSTRUCTION 2x0,34
Inner conductorInsulationCore arrang.Tape ShieldJacketWeight
Bare Copper Cross Section 0,34 mm2PE Ø=1,70 mm nat/red2 Twisted conductors with fillersNon wovensTinned Copper Braid coverage>94% Superflex PVC Ø=6,00 mm Black57 Kg/Km
COLOURand PACKAGE
100mt
Reel
ColourBlack/Blue
R E F E R E N C E
DO USE THE QUADThis four-conductor-shielded configuration can best be thought of as two twisted pairs twisted together. Using foursmall conductors in place of two large ones allows the loop area of the cable to be further reduced and its rejectionof electromagnetic interference (EMI) shows a 20dB improvement. This makes star-quad cable very popular formicrophones and balanced lines used in critical applications such as television production, where huge amounts ofpower cable for lighting and camera equipment surround the performers. Intermodulation distortion is also greatlyreduced. Besides that, using two 24 AWG conductors connected in parallel to replace each of the conductors of a22 AWG twisted pair will result in the same DC resistance, but approximately half the series inductance. This willresult in improved high-frequency performance: better clarity without the need for equalization to boost the high end.The significance of skin effect, and therefore the phase shift along the cable, is greatly reduced and this is a greatbenefit when clarity and coherence of high-frequency complex waveforms is to be considered. While the improvementmay not be as dramatic as changing the microphone, the benefits from using quad cables cannot be neglected anymore when professional microphone connections are needed. RMCQ01 is the result of an accurate design which, together with the usual high quality construction featured byReference cables (drain wire with braided high coverage screen, tight bundle and high flexibility), focused on the rightnumber of twists per unit length: with zero twists we would have a nice receiving antenna!Key featuresHigher noise immunity (>98%), from RFI to EMI to low frequency power-line hum. Improved sound quality.Antistatic PVC material: no dust, nor shake noise or induced noise from electrostatic fields.Typical applications: OB van, studio recording, broadcast and live show.
www.referencelaboratory.com
QUAD MICROPHONES ccaabblleessRMCQ series
p.26
#3
CONSTRUCTION and ORDERING CodesModel
RMCQ 01 100 m Bk (black)RMCQ 02 100 m Bk (black)RMCQ 03TP 100 m Bk (black)
Reel lenght Colours
ELECTRICAL & PHYSICALRMCQ 01 RMCQ 02 RMCQ 03TP
Capacitance cond./screen 86 [pF/m] 86 [pF/m] 104 [pF/m]Inductance <0,6mH/Km <0,6mH/Km NACond. D.C.R. 0,15 [Ω/m] 0,15 [Ω/m] 0,13 [Ω/m]Screen type Tinned copper braid coverage >90%Shield D.C.R. 0,03 Ω/m] 0,03 Ω/m] 0,03 Ω/m]Nom. Impedance 110[Ω] 110[Ω] 98[Ω]Insulation material PE PE PolyolephineTest voltage 1000 [V] 1000 [V] 1000 [V]Insulation resistanceDrain wire AWG 26 / 7 x 0,15; tinned copper NAAWG # / Area [mm2] AWG 24 / 0.20 AWG 24 / 0.20 AWG 26 / 0.16Strand (17 x 0,12), tinned 28x010 red copper 10x0,10 red copper
O.D. / Overall jacket insulation material 6,20 /Antistatic PVC 6,0 Polycab 4,8 superflex PVCWorking temp. range -30 / +70 [°C] -30 / +70 [°C] -30 / +70 [°C]
R E F E R E N C E • R M C Q 0 1
RMCQ 01
RMCQ 02
RMCQ 3TP
p.27
www.referencelaboratory.com
MICROPHONES ccaabblleess RMIC series#4
The RMIC Series is specifically designed for the sound contractors market and represents the bestcompromise between very low profile, high noise rejection and sonic performance. NPI version has to be buildto respect the International standard IEC and CEI ( CEI 20-20II IEC332.1 CEI 20-22 IEC332.3).Typical applications: any permanent installation where low profile high quality balanced connections areneeded.
CONSTRUCTION and ORDERING CodesModel
RMIC 01 - RMIC01NPI 100 m Gr (grey)RMIC 02 - RMIC02NPI 100 m Gr (grey)RMIC 05 100 m Bk (black)
Reel lenght Colours
RMIC-01NPI AWG24 / 0,22 Lap,100% AWG22 No 3,75 21,70RMIC-02NPI 2 x 28 x 0,10 PE opt. cov. 19x0,12 Yes PVC 4,70 -30 / 70 27,35
(red copper) (red copper)RMIC-05 AWG26 / 0,14 xlpe Lap NA No Polycab 4,20 -30 / 70 2,20
10x0,10 tinned(red copper) copper
MECHANICAL / PHYSICALMODEL AWG# / Area [mm2]
StrandInsul.type Shield Drain wire
AWG/Q.tySemicond.
sheathOuterjacket
Nom. O.D.[mm]
Workingtemp [°C]
Weigth[Kg/100Mt]
RMIC-01NPI < 95 75 > 10000RMIC-02NPI < 80 90RMIC-05 < 95 95 > 10000
ELECTRICALMODEL Capacitance cond/cond
[pF/m]Nom. Impedance
[ΩΩ/Km]Insulation resistance
[MΩ/Km]
RMIC 01 and RMIC01NPIThe extremely low profile of RMIC01 provides an excellent solution where preexisting pathwayshave to be shared with other connections. Moreover, cotton fillers and tight construction of thiscable guarantees uniform shape and electrical properties along the cable even following very longand groovy paths.
QUALITYSYSTEMCERTIFICATE
standardISO 9002/EN2902
RMIC 01
RMIC 02
RMIC 05
RMIC 02 and RMIC02NPIThe RMIC02 features an higher impedance and an extra semiconductive sheath surrounding the signal pairwhich is greatly effective when interferences are a major concern as in all those situations where cables have torun closeby noisy lines.
RMIC 05 polycabThe RMIC05 Micro fly - best solution for microphone connections with mobile stage design (Tv,theatre) whereabrasion hardness , lightness, flexibility and mechanical realibility are must.
www.referencelaboratory.com
PATCH ccaabblleessRPT series
p.28
#4
PATCH ccaabblleessROPF series#4
CONSTRUCTION and ORDERING CodesModel
RPT 01 100 m Rd (red), Bk (black), Bl (blue), Yl (yellow)Reel lenght Colours
SPECIFICATIONS RPT 01
AWG# / Area [mm2] AWG22 / 0,28
Q.ty / mm [mm] 2 x 44 x 0,10(red copper)
Signal pair insulation PVC HT105°Outer jacket material PVCScreen type Lap (red copper)Capacitance cond/cond (pF/m) 106Capacitance cond/screen (pF/m) 180Nom. Impedance (Ω) 59Overall diameter [mm] 4,80Weight [Kg/Km] 22Working temp °C -30/+70
ROPF01 is a thin profile balanced cable intended for permanent and semi-permanent patch connections. The foilshield gives superior protection for applications where EMI interference is a major worry and does not include thedrain wire, which provides an easy screen termination and good mechanical reliability. Constant electrical parametersalong the cable and the 100 ohm impedance results in superior sonic transparency.Typical applications: Studio installation, Broadcasting and mobile units, Conference room.
CONSTRUCTION and ORDERING CodesModel
ROPF 01 100 m Bk (black)Reel lenght Colours
R E F E R E N C E • R O P F 0 1
SPECIFICATIONSAWG# / Area [mm2] AWG24 / 0,22 Strand [mm] 2 x 7 x 0,20 (tinned copper)Signal pair insulation PVCOuter jacket material Flexible PVCScreen type Al/My foil around the pair
(conductive edge)+ drain wire (AWG24 / 0,22; tinned copper)
Capacitance cond/cond (pF/m) 98Capacitance cond/screen (pF/m) 180Nom. Impedance (Ω) 100O.D. [mm] 3,90Weight [Kg/Km] 20,55Working temp °C -30/+80
The RPT series is designed to provide high quality electric/electronic instrument and outboard connections, forrecording, home, and post-pro studio applications, processing units and mixer-to-jack-panel wiring tasks. A very high-density shield provides maximum protection from electrostatically induced hum and buzz.Cotton fillers and soft PVC guarantees a tight bundle while retaining good flexibility and handling properties.Typical applications: patch cord cable.
RPT 01
ROPF 01
R E F E R E N C E • R P T 0 1
R E F E R E N C E • R P F 0 1
p.29
www.referencelaboratory.com
PATCH ccaabblleess RPF series#4
The RPF series is designed to provide high quality balanced connections for recording, home, and post-pro studioapplications, processing units and mixer-to-jack-panel wiring tasks. The foil shield of RPF01 provides maximumprotection from electrostatically induced hum and buzz. The lap shield of RPF02 guarantees 100% optical coverageand noise immunity over a wide range of frequencies, while retaining the mechanical properties idealfor live applications. Models of RPF Series achieve the best compromise between thin profile,electrical properties and mechanical reliabilty over time.Typical applications: electronic equipment internal wiring, rack and console wiring (RPF02), studioand conference room, fixed installations (RPF01).
CONSTRUCTION and ORDERING CodesModel
RPF 01 100 m Gr (grey)RPF 02 100 m Bk (black)RPF 03 100 m Bk (black)
Reel lenght Colours
SPECIFICATIONS RPF 01 RPF 02 RPF 03AWG# / Area [mm2] AWG26 / 0,14 AWG26 / 0,14 AWG26 / 0,14 Strand [mm] 18 x 0,10 18 x 0,10 18 x 0,10Signal pair insulation PVC PE PVCOuter jacket material Flexible PVC Flexible PVC Flexible PVCScreen type Al/My foil Lap (red copper) Lap (red copper)Capacitance cond/cond (pF/m) 110 80 52Capacitance cond/screen (pF/m) 240 150 89Drain wire (tinned copper) 54 7 x 0,10 7 x 0,15 7 x 0,15Overall diameter [mm] 2,70 2,80 3,20Weight [Kg/100Mt] 1,270 1,110 1,220Working temp °C -30/+70 -30/+70 -30/+70
R E F E R E N C E • R P F 0 2
R E F E R E N C E • R P F 0 3
RPF 01
RPF 02
RPF 03
The RIC Series is intended for electric/electronic instrument, effect units, and many unbalanced connections. Theyrepresent the best choice for all guitar and bass guitar. The polyethylene conductor insulation provides low capacitanceand impedance values. The conductive plastic sheath inside the screen improves handling noise immunity due to internalstatic charges, while a very high density overall shield provides maximum protection from induced hum and buzz. Typical applications: Instrument cable, line unbalanced cable, electric guitar cable, acustic guitar cable, bass guitarcable, foot pedal connection and all acustic intrument with pick up.
www.referencelaboratory.com
INSTRUMENTS ccaabblleessRIC series
p.30
#5
CONSTRUCTION and ORDERING CodesModel Reel lenght Colours
RIC 01 RIC 02RIC 05RIC 09 T
Bk (black), Bl (blue) ON REQUEST: Gr (grey), Gn (green), Br (brown), Bl (blue), Rd (red)Bk (black) ON REQUEST: Gr (grey), Gn (green), Br (brown), Bl (blue), Rd (red)Bk (black) ON REQUEST: Gr (grey), Gn (green), Br (brown), Bl (blue), Rd (red)Transparent
100 m
RIC 01 0.016 0,25 79 51RIC 02 0.07 0,35 110 55RIC 05 0.05 0,30 110 50RIC 09 T <0.08 0,25 120 53
ELECTRICALMODEL Conductor D.C.R.
[ΩΩ/m]Shield D.C.R.
[ΩΩ/m]Cap. cond/shield
[pF/m]Impedance
[ΩΩ]
RIC 01
RIC 01 AWG18 PE foam Semic. PVC PVC 6,7 4,5 -30/+7042 x 0,15 + braided
(red copper) red copper RIC 02 AWG23 PE Semic. PVC PVC 6,8 4,5 -30/+70
16 x 0,15 + lap(red copper) red copper
RIC 05 AWG22 PE Semic. PVC Antistatic 6,6 3,9 -30/+7012 x 0,15 + lap PVC
(red copper) tinn. Copper RIC 09 T AWG23 PE Semic. PVC PVC 6,8 4 -30/+70
30 x 0,10 + lap(red copper) red/tinned
MECHANICAL / PHYSICALMODEL AWG#
Strand Insulation Shield Jacket O. D.[mm]
Weight[Kg/100Mt]
working temp[°C]
RIC 02
RIC 05
RIC 09 T
p.31
www.referencelaboratory.com
The SOLID Series is NEW deal construction's and project philosophy using solid copper and special flexible PVC.They represent the best choice for all guitar and bass guitar. The isolation offer the best dielectric constant and a goodflexibility. This NEW series is designed to deliver lower capacitance for have low stage noise and a consistent sound.Typical applications: Recording Studios - Electric & Bass guitars.
Why choose RIC-S01 cables over other generic model ?The consideration is very simple: If we have got a good quality of guitar and amplifier also we make attention on cable– must be use the cable with same standard and for specific music style also -Reference know that all cable are not the same and for best performance Reference designed specific cable forspecific music style and instrument . Beside on rock music style the musician request hi quality sound for make “your sound” and the chain is complex(digital effects, analog effects, foot pedal effects...) and the connection between all instruments must respect thisquality. RIC-S01 use a unique coaxial cable designed for pushing MID freq. highs without lose any part of audiofrequency as ROCK Music request.
INSTRUMENTS ccaabblleess SOLID series#5
RIC-S01
RIC-S01R
CONSTRUCTION 1x20 AWG
Inner conductorInsulationShield 1Shield 2Jacket
Solid Bare Copper 20AWG Foam PE Ø=2,59 mmSemiconductor Ø=3,00 mmTinned copper spiral, coverage 100%RED PVC Ø=7,00 mm
ELECTRIC CHARACTERISTICCond.Ohm resistanceInsulation resistanceTemperature range
<40 Ohm/Km >10 Mohm*Km-40 +80°C
COLOURand PACKAGE
100mtReel
Colour
Designed for Recording Studio
Designed for Rock Performance
R E F E R E N C E • R I C - S 0 1 R
Black RICS-01
Red RICS-01R
This Series is NEW deal construction's and project philosophy using all Reference experience for give the best sound.The isolation offer a good dielectric constant with a good flexibility. This NEW series is designed to deliver lowercapacitance for have low stage noise and a consistent sound. Typical application: Acoustic guitar with piezo pick up - available only in assembled version black andbrown coloursDesigned for ACOUSTIC GUITAR
Why choose RIC01A cables over other generic model ?The consideration is very simple: If we have got a good quality of guitar and amplifier also we make attention on cable– must be use the cable with same standard and for specific music style also -Reference know that all cable are not the same and for best performance Reference designed specific cable forspecific music style and instrument. Beside the musician of acoustic guitar is always insearch of the instrument that plays “its” sound. For this often turns to music shops for checkdifferent guitars and amplifiers before buy. Butforget to check the specific cable for acousticguitar. Why don’t we pay same attention on thecable? Simply because not considering that thecable is a part of chain and must have sameattention of rest of gear Reference put attention on this matter anddesigned a specific cable for ACOUSTICGUITAR-This model RIC01A is not a standard cable but isdevelopment in according with most importantguitar players.Thanks also at the new technologies of materialthis cable have a perfect matching impedanceampli-guitar pick up.
www.referencelaboratory.com
INSTRUMENTS ccaabblleessENTHUSIAST PERFORMANCES series
p.32
#5
RIC-01A CONSTRUCTION 1x20 AWG
Inner conductorShield 1Jacket
Silver Tinned CopperTinned copper spiral, coverage 99%Black or Brown PVC Ø=7,00 mm
VINTAGE series ccaabblleessRIC-01V
Vintage series cables is designed with all Reference know how for give better performance at every music style.Available in one lenght (approx: 80 cm close spiral - 3,5 mt all extension)
CONSTRUCTION 1x20 AWG
Inner conductorShield JacketInsulation
42x015 AWG 18 Red Copper Braid ,Copper + Semic.PVC Black PVC Ø=6,7 mm Insulation PE Foam
p.33
INSTRUMENTS ccaabblleess RIC QUAD series#5
The RIC Series is intended for electronic/electric instrument, effect unit and mixer unbalanced connections. Isthe best choice for guitar and bass guitar. The polyethylene conductor isolation provides low capacitance andimpedance values. The Quad series are intended for hi-end professional studio where the maximum signaltransfer with hi immunity signal is the must. Typical applications: Professional studio installation, mobile units, personal guitar cables.
CONSTRUCTION (4x0,22mm)Inner conductor
Insulation
TapeShieldDrain WireJacket
Bare copper cross section 0,22mmq AWG23 XLPE, colours: transparent,blue,red and black,4 conductors twisted Ø=1,40mmNon wovensBare copper braid coverage 90%Tinned Copper AWG21 (0,35mmq) 44x0,10PVC Superflex Antistatic black Ø 6,20mm
ELECTRICAL CHARACTERISTICSCond. Ohm resistance Capac. Cond.Cond.Capac. Cond.ShieldTemperature range Test voltageInsulation resistanceInductanceImpedance
<82 Ohm/Km48 pF/m80 pF/m-20°C +70°C
2000V DC>100 M ohm*Km<0,60 mH/Km110 Ohm
COLOURand PACKAGE
100mt
Reel
ColourBlack
CONSTRUCTION and ORDERING CodesModel
RICT 01 100 m Bk (black)Reel lenght Colours
SPECIFICATIONS RICT 01
AWG# / Area [mm2] AWG23 / 0,22Q.ty / mm [mm] 2 x 7 x 0,20 (red copper)
Signal pair insulation PESOuter jacket material PVCScreen type Lap (red copper) + semiconductive
PVC sheathCapacitance cond/screen (pF/m) 76Nom. Impedance (Ω) 53Overall diameter [mm] 6 x 12Weight [Kg/Km] 37
Working temp °C -30/+70
The RICT twin series cable have two unbalanced conductors with finest semi-conductive PVC sheathto allow the best isolation and good resistance. A very high Lap shield provides maximumprotection from electrostatically induced hum and buzz.Typical applications: Instrument cable, line unbalanced cable, Studio and Hi-Fi connections.
RICT 01
RIC10-Q
INSTRUMENTS ccaabblleessTWIN
RICT series#5
The RICTS Series is designed to connect electric/electronic instruments and signal processing units to themixing console. The conductor insulation provides low capacitance and series resistance figures. A highdensity shield guarantees maximum protection from electrostatically induced hum and buzz. Typical applications: Instrument cable, line unbalanced cable, Hi-Fi connections, studio connections,andtape recorder.
Typical Applications: Audio/Video cabling
www.referencelaboratory.com
CONSTRUCTION and ORDERING CodesModelRICTS 01 100 m Bk (black)RICTS 02 100 m Bk (black)
Reel lenght Colours
Q.ty / mm [mm] 4 x 8 x 0,18 (red copper) AWG25 2x8x0,18 (red copper) AWG25Signal pair insulation PVC PVCOuter jacket material PVC PVCScreen type Lap (red copper) Lap (red copper)Capacitance cond/screen (pF/m) 120 120Overall diameter [mm] 4X3mm 2x2,6mmWeight [Kg/Km] 4,5 4,0Working temp °C -30/+70 -30/+70
SPECIFICATIONS RICTS 01 RICTS 02
R E F E R E N C E • R I C T S 0 2
R E F E R E N C E • R I C T S 0 1
ELECTRICAL CHARACTERISTICS
Cond.Ohm resistanceInsulation resistanceCond/shield capacity
<90 Ohm/Km>10.000 Mohm x Km<140 pF/m
CONSTRUCTION 2x0,22
Inner conductorInsulationShieldJacketWeight
Bare Copper Cross Section 0,22 mm2PE Ø=1,50 mm nat/redBare copper spiralPVC Ø=3,60x7,20 mm Blue37 Kg/Km
COLOURand PACKAGE
100mtReel
ColourBlue
RICTS 02
RICTS 01
RPAV01
INSTRUMENTS ccaabblleessRICTS series
p.34
#5
UNBALANCED ccaabblleessRPAV series#11
p.35
Current carrying capacity is defined as the amperage a conductor can carry before melting either theconductor or the insulation. Heat, caused by an electrical current flowing through a conductor, will determinethe amount of current a wire will handle. Theoretically, the amount of current that can be passed through asingle bare copper wire can be increased until the heat generated reaches the melting temperature of thecopper. There are many factors which will limit the amount of current that can be passed through a wire.These major determining factors are:Conductor Size: The larger the circular mil area, the greater the current capacity.Insulation: The amount of heat generated should never exceed the maximum temperature rating,of the insulation material.Ambient Temperature: The higher the ambient temperature, the less heat required to reach the maximumtemperature rating of the insulation.Conductor Number: Heat dissipation is lessened as the number of individually insulated conductors, bundledtogether, is increased.Installation Conditions: Restricting the heat dissipation by installing the conductors in conduit, duct, trays orraceways lessens the current carrying capacity. The chart shows the current required to raise the temperaturesof 2 and 3 insulated conductor in free air (30°C ambient) to the limits of various insulation types. The followingtable gives a derating factor to be used when the conductors are bundled. These charts should only be usedas a guide when attempting to establish current ratings on conductor and cable and not for design (there aremany other factor that influence the result-please ask a professional people) . Of course the table is for ACcurrent and not for Musical signals (like speaker dirver) Musical signal is not continuous and normally theaverage is near 60%
DERATING FACTORS FOR BUNDLED CONDUCTORS
Bundle # 2 3 4 5 6 7 8 12 20 Derating Factor (X Amps) 0,80 0,70 0,65 0,60 0,57 0,54 0,52 0,45 0,38
www.referencelaboratory.com
1,5
2,5
4
6
1016
25
35
50
17,5
24
32
41
5776
101
125
151
23
31
42
54
75100
133
164
198
15,5
21
28
36
5068
89
110
134
20
28
37
48
6688
117
144
175
SECTION NUMBER OF CONDUCTORS2
(mm2) PVC EPR PVC EPRAmpere Ampere Ampere Ampere
3
Speaker cable/AC Power cableCurrent Carrying Capacity of Copper Conductors
The RPC Speaker Series feature a variety of different configurations to guarantee the best achievable performancefrom standard applications to the most critical ones.Designed for amplifier to loudspeaker connections, the RPC cables can really make the difference when maximumpower transfer, superior sonic transparency, and mechanical reliability are essential.Typical applications: studio installation, sound reinforcement, distributed speaker systemsAvailable colour: Bk (black) as standard other colours on request.
www.referencelaboratory.com
SPEAKER ccaabblleessFLEXIBLE
RPC series
p.36
#6
RPC 02 2 x 2,5 (AWG13) <8,0 FlexPVC/NPI >100 -30/+70 9 1,2980 x 0,20 red cop.
RPC 04 4 x 2,5 (AWG13) <8,0 FlexPVC/NPI >100 -30/+70 11 2,0848 x 0,25 red cop.
RPC 05 2 x 1,5 (AWG15) <14 FlexPVC/NPI >100 -30/+70 7 7,748 x 0,20 red cop.
RPC 11 2 x 0,75 (AWG19) <27,0 FlexPVC >200 -30/+70 6,3 620 x 0,20 red cop. flame resistant
RPC 12 2 x 1 (AWG18) <20,0 FlexPVC >100 -30/+70 6,7 6,530 x 0,20 red cop. flame resistant
RPC 13 2 x 1,5 (AWG15) <14,0 FlexPVC >100 -30/+70 7 8,529 x 0,25 red cop. flame resistant
RPC 14 2 x 2,5 (AWG13) <8,0 FlexPVC >100 -30/+70 8,4 11,548 x 0,25 red cop. flame resistant
RPC 15 4 x 2,5 (AWG13) <8,0 FlexPVC >100 -30/+70 11 20,748 x 0,25 red cop. flame resistant
RPC 18 8 x 1,5 (AWG15) <14,0 FlexPVC >100 -30/+70 12 24,529 x 0,25 red cop. flame resistant
RPC 25 2 x 2,5 (AWG13) + (<8,0) + FlexPVC (>100)+ -30/+70 12,2 23,22 x 4 (AWG11) (<5,0) flame resistant (>60)
80 x 0,20 red cop.+ 90 x 0,25 red cop.
CONSTRUCTION / MECHANICAL
AWG# / Area*Strand
Cond. D.C.R.[ΩΩ/Km] Jacket
Insulationresistance[MΩΩ/Km]
Workingtemp. range
[°C]
Size[mm]
Weight[Kg/100Mt]
MODEL
* all RPC models use extra fine capillary wires, red copper conductors; nominal op. voltage=300V, test voltage >1KV.
R E F E R E N C E • H I . Q S p e a k e r C a b l e
CONSTRUCTION (4x4,00mm2)Inner conductorInsulation Colour codeCore arrangementJacketWeight
Bare copper (56x0,30)PVC Ø=4,00mmBlue, red, brown, white4 conductors twisted in concentric layersSuper flex PVC black Ø13,30 mm310 Kg/Km
ELECTRICAL CHARACTERISTICSCond. Ohm resistance Insulation resistance at 20°CCapacitanceNominal Voltage Test voltageTemperature range
4,6 Ohm/Km>170 M ohm*Km81 pF/m300 V3000 Volt -30°C +70°C
COLOURand PACKAGE
100mt or upReel
ColourBlack
p.37
www.referencelaboratory.com
The RPC series feature a variety of different configurations to guarantee the best achievableperformance from standard applications to the most critical ones. Designed for amplifier toloudspeaker connections , the RPC cables can really make the difference when maximumpower transfer, superior sonic transparency, and mechanical reliability are essential. He isspeaker cable flexible series with a special jacket superflex, moreover RPC26 and 31 arebeen designed to meet the requirement of Adamson Pro Audio (Canada).Typical Applications: LIVE (Sub Woofer, Bi Amp)
SPEAKER ccaabblleessSUPER FLEXIBLE
RPC series#7
CONSTRUCTION (2x4,00mm2 FROR)Inner conductorInsulation Colour codeCore arrangementJacketWeight
Bare copper cross section 4,0 mm2PVC Ø=4,00mm, red-blueBlue, red, brown, white2 conductors twisted in concentric layersSuper flex PVC black Ø11,00 mm186 Kg/Km
ELECTRICAL CHARACTERISTICSCond. Ohm resistance Insulation resistance at 20°CCapacitanceNominal Voltage Test voltageTemperature range
4,6 Ohm/Km>170 M ohm*Km81 pF/m300 V3000 Volt -30°C +70°C
COLOURand PACKAGE
100mt or upReel
ColourBlack
CONSTRUCTION (8x2,50mm2)Inner conductorInsulation Core arrangementJacketWeight
Bare copper cross section 2,50mm 2PVC Ø=2,90mm8 conductors twisted in concentric layersSuper flex PVC black Ø=12,30 mm428 Kg/Km
ELECTRICAL CHARACTERISTICSCond. Ohm resistance Insulation resistance at 20°CCapacitanceTest voltageTemperature range
<8 Ohm/Km>100 M Ohm*Km85 pF/m3 kV -30°C +70°C
COLOURand PACKAGE
100mt or upReel
ColourBlack
Typical Applications: Live, Line Array and Integrated for multiconnectors system cabling
ELECTRICAL CHARACTERISTICSCond.Ohm resistanceInsulation resistanceCapacitanceTest VoltageTemperature range
<4,6 Ohm/Km>60 MOhm*Km80pF/m3kV-30/+70°C
CONSTRUCTION 16x4,00Inner ConductorInsulationCore arrangementJacketWeight
Bare Copper cross section 4,00 mm2PVC Ø=4,00 mm16 conductors twisted in concentric layersSuper Flex PVC Black Ø=21,50 mm878 Kg/Km
COLOURand PACKAGE
100mt or upReel
ColourBlack
Typical Applications: Live, Line Array and Integrated for multiconnectors system cabling
RPC26
RPC27
RPC31
RPC32
Recommended by
REFERENCE • Superflex Speaker cable mod. RPC32
www.referencelaboratory.com
SPEAKER ccaabblleessSUPER FLEXIBLE
RPC series
p.38
#6
CONSTRUCTION CROSS SECTION 4X2,50mm2Inner ConductorInsulationColour code
Fine wires Bare Copper cross section 2,50 mm2PVC COMPOUND Ø=2,90 mmRed/blue/white/brown
CONSTRUCTION CROSS SECTION 4X4,00mm2Inner ConductorInsulationColour code
Fine wires Bare Copper cross section 4,00 mm2PVC Compound Ø=4,00 mmorange/green/black/yellow
OVERALL CONSTRUCTIONTwistingJacketWeight
Black PVC SUPERFLEXIBLE Ø=16,40 mm46,8 Kg/100Mt
Typical Applications: Line Array Sound Systems/Live/Installation
COLOURand PACKAGE
100mt or upReel
ColourBlack
Typical Applications: Line Array Sound Systems/Live/Installation
CONSTRUCTION (8x4mm2)Inner conductorInsulation Core arrangementJacketWeight
Bare copper cross section 4mm 2PVC Ø=4.0mm8 conductors twisted in concentric layersSuper flex PVC black Ø=16,5 mm720 Kg/Km
ELECTRICAL CHARACTERISTICSCond. Ohm resistance Insulation resistance at 20°CCapacitanceTest voltageTemperature range
<4,6 Ohm/Km>100 M Ohm*Km81 pF/m3 kV -30°C +70°C
COLOURand PACKAGE
100mt or upReel
ColourBlack
RPC46
RPC48
Recommended by
R E F E R E N C E • S u p e r f l e x S p e a k e r c a b l e m o d . R P C 4 6
RPC 08 2 x 2,5 (AWG13) <7,5 70 SuperFlex PVC/ >200 -30/+70 10 13,6flame resistant
RPC 09 4 x 2,5 (AWG13) <7,5 70 SuperFlex PVC/ >200 -30/+70 12 23,5flame resistant
RPC 10 6 x 2,5 (AWG13) <7,5 70 SuperFlex PVC/ >200 -30/+70 13,5 32,2flame resistant
RPC 16 8 x 1,5 (AWG15) <12,0 70 SuperFlex PVC/ >200 -30/+70 14 52(uses 0,15 capillary wires) flame resistant
RPC 19 2 x 4 (AWG11) <4,3 80 SuperFlex PVC/ >60 -30/+70 11,4 21,3flame resistant
RPC 20 4 x 4 (AWG11) <4,3 80 SuperFlex PVC/ >60 -30/+70 13 32,9flame resistant
RPC 21 8 x 2,5 (AWG13) <7,5 70 SuperFlex PVC / >200 -30/+70 15,2 53,8flame resistant
RPC 23 2 x 6 (AWG9) <3,25 86 SuperFlex PVC/ >140 -30/+70 12 25,8flame resistant
RPC 24 2 x 10 (AWG7) <1,92 88 SuperFlex PVC/ >135 -30/+70 14,4 38,9flame resistant
RPC 33 16 x 4 (AWG11) <4,3 80 SuperFlex PVC/ >60 -30/+70 21,50 87,8flame resistant
RPC 45 4x2,5 +4x4 <7.5 - <4,6 82 SuperFlex PVC/ >90 -30/+70 16,50 47flame resistant
RPC 47 8x4 (AWG11) <4,3 81 SuperFlex PVC/ >100 -30/+70 16,5 72flame resistant
• all RPC models use extra fine capillary wires, red copper conductors; nominal op. voltage=300V, test voltage >1KV.
MODEL AWG# / Area[mm2]*
Cond. D.C.R.[ΩΩ/Km]
Capacitance[pF/m] Jacket
Insulationresistance[MΩΩ/Km]
Workingtemp. range
[°C]Size Weight
[Kg/100Mt]
CONSTRUCTION / MECHANICAL
p.39
www.referencelaboratory.com
The RPC Speaker Series feature a variety of different configurations to guarantee the best achievable performance from standardapplications to the most critical ones. Designed for amplifier to loudspeaker connections, the RPC cables can really make thedifference when maximum power transfer, superior sonic transparency , and mechanical reliability are essential.Typical applications: studio installation, sound reinforcement, distributed speaker systems. Available colour: Bk (black).Line array systems
MULTISTRANDS SPEAKER ccaabblleessSUPER FLEXIBLE
RPC series#7
An example of power loss calculation on a line by 20 mt length through speaker cable with a diameter of 6mm and 10m• DC resitance - 3.25 Ohm/Km = 0,00325 Ohm/m - (6 mm2)• DC resitance - 1.95 Ohm/Km = 0,00195 Ohm/m - (10 mm2)• 20 mt of cable sec. 6mm2 - DC resitance = 0,065 Ω• 20 mt of cable sec. 10mm2 - DC resitance = 0,039 Ω
R.cable (cable resistance)
AMP
Load (2)RL (resistance
of amplifierload)
(over 20mt length)
R.cable (RPC23)= 0,065 ΩR.cable (RPC24)= 0,039 ΩWith: P.amp =2500W
R.cableP.loss (power loss)= P.amp x
RL + R.cable
POWER LOSS
The calculate data are the following:-in the BLU box, they are reffered to line Multistrand Reference;-in the ROSSO box, they are reffered to simulations of “lines” Non Multistrand.
length
102030
102030
areammq
666
101010
power onOhm load
in watt2500 w2500 w2500 w
2500 w2500 w2500 w
power losson cable
in watt40 (-0,07 dB)78 (-0,13 dB)116 (-0,21 dB)
24 (-0,041 dB)48 (-0,081 dB)35 (-0,12 dB)
courrentampere
34,8034,8034,80
35,1035,1035,10
effectivepower
on speaker246024222380
247624522430
loss %
1,603,124,64
0,961,922,80
loss %on
multistrand2,95,38,2
1,62,75,1
The RPC/S speaker series is an innovation for critical installation where is required the best protection frominterfering signals. An overall tinned copper screen braided gives extra noise immunity. This line has beenconfigured with two models, they guarantee the best achievable performances from standard applications to themost critical ones.Typical applications: Critical sound audio installation and distribuited speaker system; Available colour: Bk (black).
www.referencelaboratory.com
OVERAL SHIELD PEAKER ccaabblleessFLEXIBLE
RPCS series
p.40
#6
RPC/S 26 <14 1 >80RPC/S 27 <7,7 1 >100
ELECTRICALMODEL Conductor D.C.R.
[ΩΩ/Km]Test voltage
[kV]Insulation resistance
[MΩΩ/Km]
RPC/S 26 AWG16 / 1,5 Braided tinn. PVC -20/+70 7,4 9,4 100(red copper) copper compound (flexing)
RPC/S 27 AWG13 / 2,5 Braided tinn. PVC compound -20/+70 9,0 15,2 100(red copper) copper (flexing)
CONSTRUCTION / MECHANICAL
AWG #Area Screen Jacket Working
temp. [°C]O.D.[mm]
Weight[Kg/100Mt]
Reel capacity[m]
MODEL
RPCM 01 4,0 23 >230RPCM 02 6 19 >210RPCM 03 3,6 31 >200
ELECTRICALMODEL Cond. D.C.R.
[ΩΩ/Km]Power rating
[A]Insulation resistance
[MΩΩ/Km]
RPCM 01 AWG12 / 3,3 Flexible PVC -40/+70 -20/+70 4,3x9,50 8,9 1007 x 60 x 0,10
RPCM 02 AWG14 / 2,03 Flexible PVC -40/+70 -20/+70 3,20x7,0 3,9 1007 x 37 x 0,10
RPCM 03 AWG10 / 5,22 Flexible PVC -40/+70 -20/+70 5,0x10,0 13 1007 x 95 x 0,10
CONSTRUCTION / MECHANICAL
AWG# / AreaStrands/Q.ty / mm
Size[mm]
Weight[Kg/100Mt]
Reel capacity[m]
MODEL Working temp. range [°C]
Static FlexingJacket
p.41
www.referencelaboratory.com
The RPCM speaker cable series are especially designed to be used with Banana-like connectors or receptacles andalso represent a nice-looking solution for power connections. High level signals have their sonic contents preservedthanks to the high quality design and manufacturing process which privileges a high number of strands of very thinoxygen free capillary wires twisted together. This means maximum sonic transparency and power transfer over a widerfrequency range, and higher flexibility.Typical applications: Studio wiring, Hi-Fi speaker connections, Home theatre, Head amplifier /Speaker cabinetconnectionAvailable colour: Transparent fumè
MULTISTRANDS SPEAKER ccaabblleessSUPER FLEXIBLE
RPCM series#8
Excellent loudspeaker cable thanks to its very low inductance and impedance figures. Coaxial structure and double screenprovide superior noise rejection.Typical applications: Live, installation, where is required a 1/4 phone plug connector and HI-FI car for the best lowfrequency applications.RPC06 Available colour: Gr (grey).
www.referencelaboratory.com
COAXIAL SPEAKER ccaabblleessFLEXIBLE
RPC series
p.42
#5
RPC 06 15 380 50 0,6 >10
ELECTRICAL
Cond. D.C.R.[ΩΩ/Km]
Cap. cond/cond[pF/m]
Nom. Op. Voltage[V]
Inductance[mH/Km]
Insulationresistance[MΩΩ/Km]
MODEL
RPC 06 2 x 1,5 (AWG15) coaxial FlexPVC/NPI -30/+70 6 6,4
CONSTRUCTION / MECHANICALAWG# / Area
[mm2]*Structure
Jacket Working temp. range Size[mm]
Weight[Kg/100Mt]
MODEL
R E F E R E N C E • R P C 0 6
* all RPC models use extra fine capillary wires, red copper conductors; nominal op. voltage=50V, test voltage >1KV.
LOUDSPEAKER TWIN ccaabblleessRPCM L series#8
ELECTRICAL CHARACTERISTICSOhmic resistance maxInsulation resistance Power ratingTemperature range Static
Flexing
<13 Ohm/Km>22 Mohm x Km16,5A-40°C +70°C-20°C +70°C
New line of TWIN speaker cable with transparency jacket fumè.Typical Applications: for medium budget, Hi Fi and audio Installations.
COLOURand PACKAGE
100mtReel
ColourFumè Transparent - White
ELECTRICAL CHARACTERISTICSOhmic resistance maxInsulation resistance Power ratingTemperature range Static
Flexing
<8 Ohm/Km>20 Mohm x Km6A-40°C +70°C-20°C +70°C
COLOURand PACKAGE
100mtReel
ColourFumè Transparent - White
CONSTRUCTION 2x1,50Inner conductor 1Inner conductor 2JacketWeight
Bare Copper 48x0,20Tinned copper 48x0,20PVC Flexible Ø=2,80x5,6040 Kg/Km
CONSTRUCTION 2x0.75Inner conductor 1Inner conductor 2JacketWeight
Bare Copper 23x0,20Tinned copper 23x0,20PVC Flexible Ø=2,2x520 Kg/Km
RPC 06
RPCML 06
RPCML 08
ELECTRICAL CHARACTERISTICSOhmic resistance maxInsulation resistance Power ratingTemperature range Static
Flexing
<8 Ohm/Km>20 Mohm x Km10A-40°C +70°C-20°C +70°C
COLOURand PACKAGE
100mtReel
ColourFumè Transparent - White
CONSTRUCTION 2X1.0Inner conductor 1Inner conductor 2JacketWeight
Bare Copper 31x0,20Tinned copper 31x0,20PVC Flexible Ø=2,5x5,530 Kg/Km
RPCML 09
p.43
www.referencelaboratory.com
A dedicated “Twin Speaker Cable” line well designed to meet the faster installation because the twin’sconstruction besides white finish to allowe the full integration with the ambience.Typical Applications: Loudspeaker installation
LOUDSPEAKER TWIN ccaabblleess RPC-TW series#8
ELECTRICAL CHARACTERISTICS
Ohmic resistance maxInsulation resistancePower rating
26,31 Ohm/Km>22 Mohm x Km9A
CONSTRUCTION 2x0,75
Inner conductorJacketWeight
Bare Copper Cross Section 0,75 mm2Flexible PVC Ø=2,20x4,40 mm white 21 Kg/Km
ELECTRICAL CHARACTERISTICS
Ohmic resistance maxInsulation resistancePower rating
19,52 Ohm/Km>25 Mohm x Km11A
CONSTRUCTION 2x1,00
Inner conductorJacketWeight
Bare/Tinned Copper Section 1,00 mm2Flexible PVC Ø=2,80x5,60 mm white 30 Kg/Km
Typical Applications: Loudspeaker installation
ELECTRICAL CHARACTERISTICS
Ohmic resistance maxInsulation resistancePower rating
<14 Ohm/Km>19 Mohm x Km16,5A
CONSTRUCTION 2X1,5
Inner conductorJacketWeight
Bare Copper Cross Section 1,50 mm2Flexible PVC Ø=2,80x5,60 mm white 40 Kg/Km
Typical Applications: Loudspeaker installation
COLOURand PACKAGE
100mtReel
ColourWhite
COLOURand PACKAGE
100mtReel
ColourWhite
COLOURand PACKAGE
100mtReel
ColourWhite
RPCTW-11
RPCTW-12
RPCTW-13
www.referencelaboratory.com
CONSTRUCTION 2x14 AWG
Inner conductorInsulationCore arrangementJacketWeight
Bare Copper 62x0,20PE Ø=3,30 mm white/orange2 twisted conductorsTube PVC Ø=8,90 Grey91 Kg/Km
New line wih a short twist pitch (TP) projected mechanically to be ideal for live.Typical Applications: Pro Live Sound Systems
ELECTRICAL CHARACTERISTICS
Cond.Ohm resistanceInsulation resistance at 20°CTwist pitch TPTemperature range
8,4 Ohm/Km>10.000 Mohm x Km70 mm-30°C +80°C
CONSTRUCTION 2X14 AWG
Inner conductorInsulationCore arrangementJacketWeight
Bare Copper 62x0,20PE Ø=3,30 mm white/orange2 twisted conductorsPVC Ø=8,90 Black111 Kg/Km
ELECTRICAL CHARACTERISTICS
Cond.Ohm resistanceInsulation resistance at 20°CTwist pitch TPTemperature range
8,4 Ohm/Km>10.000 Mohm x Km70 mm-30°C +80°C
COLOURand PACKAGE
100mtReel
ColourGrey
COLOURand PACKAGE
100mtReel
ColourBlack
New line with a short twist pitch (TP).Typical Applications: Fixed Installation Pro Recording/TV Studio
TP
SPEAKER ccaabblleessRPC TP “STUDIO”series
p.44
#7
SPEAKER ccaabblleessRPC TP “LIVE”series#7
RPC40 TPS
RPC41 TPL
REFERENCE • Speaker cable mod. RPC41 TPL
Reprint whit the permission of Pro Sound News November 2000”
Montreaux Jazz Festival
Since 1966, the Montreux Jazz Festivalhas been setting the standard as being possiblythe most prestigious European jazz event.This year was no exception with a star-studded line-up of more than 50 artistsperforming at one of the ten festivalvenues, with renowned acts such as JoeSatriana, Al Jarreau, Lou Reed, Macy
Gray and Suzanne Vega, over a quarterof a million visitors were attracted toMontreux during the 16 day event.Once again, Meyer Sound provided a
wide range of it's self powered speakersas in previous years.
Indeed, from the Miles Davis Hall and [Mark Johnson]Stravinski Auditorium to the boats and the Jazz Cafe, more than 350loudspeaker systems were integrated into festival venues.The new QuickFly rigging system was incorporated into arrays to enablequicker load-in / load-out times.The Festival also marked the debut for the LD-2 Line Driver, a productspecifically designed for integrating different types of Meyer Soundself-powered loudspeakers into an optimised full range system. As a line driver, the LD-2 can connect to cable runs of up to around300 metres without any instability or distortion. [Mark Johnson] After a series of rigourous tests, Meyer Sound choseReference Laboratory cables [Mark Johnson] to use at this years'edition of the Montreux Festival. Specifically, the RPLC 01 and 03cables were chosen. Meyer's Production Manager [Mark Johnson] for
the event, MarkJohnson commented "Wechose the RPLC 03 in the [Mark Johnson]Stravinski and Miles Davis systems so we
could [Mark Johnson] utilize our RMS(Remote Monitoring System).As the RPLC 03 has an extra signalpair, it allowed us to have thecapability for power, signal anddata. [Mark Johnson] The Mainand Monitor systems for boththese venues [Mark Johnson]were set up so all the speakerswere RMS capable allowingus to closely monitor the[Mark Johnson] performance
and well being of these systemson laptop computers at both FOHand monitor positions. Whencoupled with VEAM connectors,reconfiguring the monitor systemsfor different acts was both a quickand easy process. "The systemswhich did not use the RMS utilisedthe RPLC 01 cables as this doesnot carry an extra signal pair. [MarkJohnson] In all cases, using theReference cables helped speed
up the installation process.
AC
/LIN
E c
able
s R
PLC
01
NP
I 3x
1,5
mm
+ 2
xAW
G 2
2 Ø
11,
0 m
m
RPLC 08 NPIR
PLC
03 NP
I
RPLC 01 NPI
RLAReference Lab Application
www.referencelaboratory.com
RLARefe
rence
Lab A
pplicatio
n
Once cable jacketwith AC (power) + Balanced Signal
Audio Application:powered loudspeaker • powered stage monitor • powered nearfield
Light Application:DMX and Power
To optimize the installation’s time schedule To support and mantein the original audio performance.
3x1,5 mm+2xAWG22 Ø 11 mm
3x1,0 mm+2xAWG22 Ø 2x5,5 mm
3x1,5 mm+2 pairs2xAWG22 Ø 12,5 mm
Mod. RPLC-01 NPI
Mod. RPLC-02 NPI
Mod. RPLC-03 NPI
3x2,5 mm+2xAWG22 Ø 12,2 mm
Mod. RPLC-06 NPI
3x2,50 mm+2pairs2xAWG2 Ø 13,47 mm
Mod. RPLC-07 NPI
3x2,0 mm+2 pairs2xAWG22 Ø 13,4 mm
Mod. RPLC-08 NPI
3x1,5 mm+2xAWG22 Ø 13,9 mm
Mod. RPLC-09 NPI
Mod. RPLC-11
According withthe typologyof application the RPLC seriescables has to bebuilt to respectthe International Standard IEC.
• For Live application is build under Flame resistent CEI 20-20 IEC332.1
• For Fixed installation is build under
• Fire Resistence (NPI not spread the fire) CEI 20-22 III IEC332.3
• LSZH (Low Smoke Zero Halogen) Mod. RPLC05 ZHCEI 20-22 III IEC 332.3 CEI 2037
Has chosen RPLC seriesfor third consecutive yearat Montreux jazz Festival
for all powered Loudspeaker and
Stage Monitor.
3x2,0 mm+2xAWG22 Ø 15,9 mm
Mod. RPLC-12
3x1.5mm +2 pairs 2xAWG22 Ø 14 mm
www.referencelaboratory.com
p.47
COMPOSITE ccaabblleess AC/LINE series#10
A single Cable Jacket With AC (power) + 110 Ohm Balanced Line
RPLC Series provide a unique single-cable solution for powered loudspeaker systems. Effective insulation andconstruction quality preserves audio signal integrity while allowing compact, mechanically reliable and fastinstallations. The use of NPI* and LSZH* materials makes RPLC cables the right choice for both permanent andmobile installations. Besides for live application it’s super flexiblePVC compound , in order to have the faster memory cable.
Typical Applications: Powered loudspeaker and stage monitoringsystems, Live and studio nearfield monitoring systems, PermanentinstallationsLight Controls (DMX data + POWER)NPI PVC: complying to IEC 332/1 (flame inhibiting material)
ELECTRICAL & PHYSICALMODEL
Balanced Line section AC powersection Overall
CONSTRUCTIONNUMBER OFBALANCED
LINES/POWER LINES
Screentype
ShieldD.C.R.
Nom.Impedance
O.D./Insul.mat./jacket mat.
Max.oper.
Voltage
AWG #/ Area
Insulationresist
AWG #/ Area
Cond.insulation
jacketmaterial
Temp.range
O.D. /Weight
[Ω/m] [Ω] [mm] [kV] [mm2] [MΩ/Km] [mm2] [°C] [mm]/
[Kg/Km]
1 / 3x1.5 mmq
1 / 3x1.0 mmq TWIN
2 / 3x1.5 mmq
2 / 3x1.5 mmq TWIN
1 / 3x2.5 mmq
2 / 3x2.5 mmq
2 / 3x2.0 mmq
1 / 3x1.5 mmq
1 / 3x2.5 mmq
1 / 3x2.0mmq
2 / 3x1.5 mmq
RPLC01 NPIRPLC01
RPLC02 NPI
RPLC03 NPIRPLC03
RPLC04 NPI
RPLC06 NPIRPLC06
RPLC07 NPIRPLC07
RPLC08 NPIRPLC08
RPLC09
RPLC10
RPLC11
RPLC12
A1/My+tinnedcopperbraid
0,018
0,018
0,018
0,018
0,056
110
110
110
110
110
4,50/PE/
superflexPVC
PE/superflex
PVCPE/
superflexPVC
PE/superflex
PVC
PE/superflex
PVC
1
1
1
1
1
AWG22/0,34
AWG22/0,34
AWG22/0,34
AWG22/1/0,34
AWG1x0,34
>100
>100
>100
>100
>100
AWG16/1,50AWG17/1,00AWG16/1,50AGW16/1,50AWG13/2,50
AWG13/2,50
AWG14/2,00
AWG16/1,50AWG13/2,50
AWG1472.00
AWG16/1,5
PVC
PVC
PVC
PVC
PVC
PVC
PVC
PVC
PVC+overal1 PVCjacket
PVC+overal1 PVCjacket
PVC+overal1 PVCjacket
TNTtape +
NPI PVCNPI PVC
TNTtape +
NPI PVCNPI PVC
TNTtape +
superflexPVCTNT
tape +superflex
PVCTNT
tape +superflex
PVC13,9/PVC
15,00/TNT
tape+superflex
PVC15,00/TNT
tape +superflex
PVC15,00/TNT
tape +superflex
PVC
-20/+70
-20/+70
-20/+70
-20/+70
-30/+70
-30/+70
-30/+70
-20/+70
-30/+70
-30/+70
-30/+70
10,7/164
2x6/120
12,4/200
8,4+4,9/202
11,8/195
13,9/231
13,6/221
13,7/222
15/254
www.referencelaboratory.com
www.referencelaboratory.com
MULTIMEDIA CONTROL ccaabblleessp.48
#9
Composite cable with power 2x1mmq plus balanced audio cableApplication: Power + signal for active loudspeakers with CC. power supply
2x1 mmq AWG17 tinned copper Balanced 2x035 AWG 22Insulation PVC Red and Black Drain wire 025-AWG24 Max. op Voltage 100 volt Shield FOILOuter jacket PVC NPI CEI 20-22 dia 6.5 grey colour Insulation PE
POWER SECTION AUDIO SECTION
Composite cable with power 2x1.5mmq plus balanced audio cableApplication: Power + signal for active loudspeakers with CC. power supply
2x1.5 mmq AWG16 tinned copper Balanced 2x035 AWG 22Insulation PVC Red and Black Drain wire 025-AWG24 Max. op Voltage 100 volt Shield FOILOuter jacket PVC NPI CEI 20-22 Dia 8.3 black colour Insulation PE
POWER SECTION AUDIO SECTION
Composite cable video 50 ohm + Power
2x0.5 mmq AWG20 Red copper 0,50 AWG 20Insulation PVC Red and Black HT 105 Polyethylene Max. op Voltage 1200 volt Shield braid red copperOuter jacket PVC O.D.6.5 White colour Impedance 50 OHM
POWER SECTION AUDIO SECTION
Composite cable video 75 ohm + Power
2x1.5 mmq AWG16 Red copper 0,41 AWG 20Insulation PVC Red and Black HT 105 Foma PE Max. op Voltage 3000 volt Shield braid red copper + FOILOuter jacket PVC O.D.8.2 NPI CEI 20-22 Grey colour Impedance 75 OHM
POWER SECTION AUDIO SECTION
RPLC19-NPI
RPLC10NPI
RCSR 01
RCSR 02
Development for speaker MM4xP Meyer Sound
SECURITY CONTROL ccaabblleess#9
R E F E R E N C E • R C S R 0 1
R E F E R E N C E • R C S R 0 2
NO PLENUM PLENUMConductor Solid bare copper Solid bare copperJacket PVC w/sun resistance Low smoke PVC
ripcord and sequential footage ripcord and sequential footageRated temp. 60°C 75°CInsulation Foam Polypropilene Low smoke PVCOperation 300 Volt 300 VoltApproval UL Type FPLR-NEC article 760 UL Type FPLR-NEC article 760
CUL Type CMP/FT4 - Cal. Marshal CUL Type CMP/FT7 - Cal. MarshalRFA - 1.3 RFA - 2.0
2 conductors 2 conductorsConstruction AWG 16 solid bare copper AWG 14 solid bare copperColor code black - red black - redInsulation 010 inch 012 inchCapacitance nominal = 32,5 pF/ft nominal = 32,3 pF/ftImpedance 57 Ohm 56 OhmResistance 4,016 Ohm/Feet 2,525 Ohm/FeetVel. of Propag. 55% 55%Jacket red red
Available also in FOIL SHIELD VERSION code: RFA 1.3 - SH and RFA - 2.0 - SH
RFA - 1.0 RFA - 1.52 conductors 2 conductors
Construction AWG 17 solid bare copper AWG 15 solid bare copper Color code blue - brown blue- brown Insulation LSZH LSZH Shield Foil Foil Normative References IEC6033.2 (lszh) IEC6033.2(lszh)
IEC754-1 754-2 halogen free IEC754-1 754-2 halogen free Vel. of Propag. 55% 55% Jacket (extruded) LSZH red LSZH red
www.referencelaboratory.com
RFA-2.0
Fire alarm Reference cables is a new family designed for use in critical circuits that necessitate the cable's electrical operationin condiction of exposure to fire and water. Reference fire alarm cables wil provide the cable operation required for emergypower to fire pump and power panel for lighting and all other power function that may support safe and rapid building evacuation.Application: Fire protection- Emergy power - Home security - Comunication Smoke detector
p.49
FIRE ALARM ccaabblleess AC/LINE series#12
www.referencelaboratory.com
DMX ccaabblleessRDMX series
p.50
#9
ELECTRICAL & PHYSICAL
Capacitance 47 [pF/m]Inductance < 0,6 mH/KmCond. D.C.R. 0.087 [Ω/m]Screen type Braided (tinned copper, >90%) + drain wireShield D.C.R. 0.016 [Ω/m]Nom. Impedance 120 [Ω]Insulation material PVCTest voltage 1000 [V]AWG # / Area [mm2] AWG 24 / 0.22 red copperInsulation resistance > 100 MΩ/Km
O.D. / Overall jacket insulation material 5,9 [mm] / SuperFlex PVCWorking temp. range -20 / +70 [°C]Available colours: Blue, Grey, Black
The RDMX Series is designed to provide compact and high quality cables for lights control. Superior power transferfigures are possible since all cables feature a 120 ohm characteristic impedance providing better impedance matchingproperties.
RDMX 01Two conductors designed to transfer the signal for the digital light technology and observing thestandard reference UL2919,manteining also a reasonable flexibility.Typical Applications: Light and scanner.Available colours: black.
Capacitance [pF/m] 42Nom. Impedance [Ω] 120 Insulation material PEScreen type Al/My foil (Al outside)+ 90% braid Drain wire (between shields) 0.22 [mm2], (7 x 0.20) tinned copper AWG # / Area [mm2] AWG 24 / 2 x 0.22 Qty x [mm]. 2 x (7 x 0.20) tinned copper
O.D. / Overall jacket [mm] 6,30 / PVCinsulation materialWorking temp. range [°C] -20 / +70 Weight [Kg/Km] 49,85
ELECTRICAL & PHYSICAL
RDMX 01
RDMX 01 SF
www.referencelaboratory.com
p.51
DMX 120 Ohm ccaabblleess DMX series#9
CONSTRUCTION 2x0,34 KEVLAR + PURInner conductor
InsulationCore arrang.Shield 1Shield 2Jacket
Extra Fine wires tinned copper 2x0,34 IEC228 CL5Foam PE Black/natural Ø=1,45 mm2 twisted conductors with Kevlar fillAluminium/my tape, coverage 100%Tinned copper braidBlack PUR Ø=6,00 mm
ELECTRICAL CHARACTERISTICSCond.Ohm resistanceShield Ohm resistanceInsulation resistanceInductanceImpedanceDensityCapacitance cond./cond.Capacitance cond./shieldTest voltageTensile strenght
<56 Ohm/Km<18Ohm/Km>10000 Mohm*Km0,6mH/Km120 Ohm1,3 g/cm333pF/m56pF/m1000 Volt DC31N/mm2
COLOURand PACKAGE
100mtReel
ColourBlack
Colour
Innovative construction with polyurethane & kevlar.
Typical Applications: PRO-LIVE in critical conditions (high temperature weather, mechanical and logistic)
CONSTRUCTION 2X0,34 Inner conductor
InsulationCore arrang.Shield 1Shield 2Jacket
Extra Fine wires tinned copper 2x0,34 IEC228 CL5Foam PE Black/natural Ø=1,45 mm2 twisted conductors with fillerAluminium/my tape, coverage 100%Tinned copper braidPVC Ø=6,8 mm
ELECTRICAL CHARACTERISTICSCond.Ohm resistanceShield Ohm resistanceInsulation resistanceInductanceImpedanceDensityCapacitance cond./cond.Capacitance cond./shieldTest voltageTensile strenght
<56 Ohm/Km<18 Ohm/Km>10000 Mohm*Km0,6mH/Km120 Ohm1,3 g/cm365pF/m102pF/m1000 Volt DC20N/mm2
COLOURand PACKAGE
100mtReel
ColourBlue
Colour
Typical Applications: PRO-LIVE long distance
CONSTRUCTION DMX
CONSTRUCTION POWER
InnerInsulationShield
InnerInsulationOverall diameter
2x034 (AWG22) Bare copper PE 1,50 nat/redBlue al/My tape +drain wire
2x2mmq (AWG13) bare copper PVCPVC 7,30 mm
ELECTRICAL CHARACTERISTICS DMX
ELECTRICAL CHARACTERISTICS POWER
Cond. resistanceCapacitanceImpedance
Insulation resistance
<50ohmKm51pF Mt.120 ohm
>32Mohm/Km.
COLOURand PACKAGE
100mtReel
ColourBlue
This cable to provide highest quality quality for data and power supply to our scroller even for long distanceand /or in complex system installation.
RDMX01 PUR
RDMX03
RAMX/AC01
Colour Changer ccaabblleess RAMX/AC series#9
DMX ccaabblleessRDMX series
p.52
#9
www.referencelaboratory.com
Capacitance 41 [pF/m]Inductance < 0,6 mH/KmCond. D.C.R. 0.056 [Ω/m]Screen type Foil + Braid Tinned copper 100%) + DWShield D.C.R. 0.016 [Ω/m]Nom. Impedance 120 [Ω]Insulation material PETest voltage 1000 [V]AWG # / Area [mm2] AWG 22 / 0.34 red copperInsulation resistance > 100 MΩ/Km
O.D. / Overall jacket 12,70 [mm] / SuperFlex PVCWorking temp. range -20 / +70 [°C]Weight 12,5 [Kg/100Mt]
41 [pF/m]< 0,6 mH/Km0.056 [Ω/m]Foil + Braided Tinned copper + DW0.016 [Ω/m]120 [Ω]PE1000 [V]AWG 22 / 0.34 red copper> 100 MΩ/Km
15 [mm] / SuperFlex PVC-20 / +70 [°C]25 [Kg/100Mt]
SPECIFICATIONS RDMX02SF (2 PAIRS) RDMX04 (4 PAIRS)
RDMX 02SFMulti DMX cable designed to transfer the signal for the digital light console in one solution . For its temporally use weadopted the superflexible Jacket to maintain the faster memory cable.Typical applications: Light and scanner mix connection.
Minimum bending radius 15X OD
p.53
Description: Any LIGHT-nex cable is highly flexible and nice to handle; the special compound studied for the outer jacket isalso opaque and velvety. These cables are ideal for both heavy duty daily usage or contractor applications for at leastreasons.
FLAME RETARDANT MATERIALS (NPI)All models are CEI 20-22 II compliant (flame retardant property), and feature materials with minimal toxic gas emissions – amust for public spaces installations.
GOOD HANDLING Thanks to the special compound used for the outer jacket these cables are extremely flexible and yet resistant to rubbingand scraping; the perfect solution for any task that involve frequent handling or incidental stamping (i.e. LIVE). The materialis also highly resistant to mineral oils, and suited to work within a wide temperature range (–30°C a +80°C).
LOW SMOKE ZERO HALOGEN - TINNED COPPER CABLESSingle core cables with flexible tinned copper conductor, under double insulation: insulated with special M1thermoplastic compound, under an external special M1 thermoplastic sheat (classified as M1 in accordance withItalian CEI 20-11). Flame and fire retardant cable, with very low smoke and fume emission and without halogenidricgas emission; therefore those cables are recommended for installations which need maximum safety in case of fire:emergency lights, aeration systems, emergency telephone systems and emergency audio/voice evacuation systems.flame retardant material NPI.
LIGHT ccaabblleess RLC series#9
www.referencelaboratory.com
RLC28 7 x 1,5 (AWG15) <14 83 PVC >160 -30/+70 9,7 277RLC29 12 x 1,5 (AWG15) <14 83 PVC >160 -30/+70 12,4 406RLC30 19 x 1,5 (AWG15) <14 83 PVC >160 -30/+70 14,4 322RLC31 7 x 2,5 (AWG13) <14 86 PVC >140 -30/+70 11 252RLC32 12 x 2,5 (AWG13) <8,1 88 PVC >140 -30/+70 14,7 416RLC33 19 x 2,5 (AWG13) <8,1 86 PVC >140 -30/+70 17,4 632
RLC is a range of multiconductor cable for the lighting applications on stage. Its design has beenprojected to maintain the smaller diameter and the best flexibility in order to resolve the difficult of thelive applications. It is manufactured with the conformity CE 73/23 and IEC regulation.Typical applications: Live and Installation lighting.
CONSTRUCTION / MECHANICAL
AWG# / Area[mm2]*
Cond. D.C.R.[ΩΩ/Km]
Capacitance[pF/m]
Jacketmaterial
Insulationresistance[MΩΩ/Km]
Workingtemp. range
[°C]
Size[mm]
Weight[Kg/Km]
MODEL
LIGHT-nex ccaabblleess SUPER FLEXIBLE and LSZH series#9
Comparation Chart
H07RN-F PIREFLEX H07RN-F TITANEX 11 REFERENCE Light nexJacketWorking Temperature Min. (°C)Working Temperature Max. (°C)Short circuit temperature (°C)Flame propagationFire resistance (NPI)Low Smoke Zero HalogenStress and abrasion resistanceOzone resistanceResistance to oil and greaseWater resistance
Neoprene-3560
200CEI 20-35
NoNo
AG4/Very goodYesYesYes
Neoprene-3585
250CEI 20-35
NoNo
Very good-
YesYes
PVC Compaund-3090
200CEI 20-35CEI 20-22CEI 20-37
GoodYesYesYes
LIGHT nex series is conform to:• CEI 20-35 • CEI 20-22 II • CEI 20-37 • 2002/95/CE (RoHS)
i.e. CONSTRUCTION 3X2,5 mm
Conductor (nxmm)External diameter (mm) Conductor diameter (mm)Insulation thickness (mm) Jacket thickness (mm)Nominal voltage (V)
48x0,25 tinned10,0 +0,23,45 +0,1 0,751,0300/500 V
ELECTRICAL CHARACTERISTIC
Electric resistance (Ohm/Km) Self extinguishing gradeUltimate % elongation Ultimate tensile stress unitary (Kg/mm2)After aging characteristics Temperature range (°C)
7,40positive (CEI normative)220 1,45without important variations30/80
The specifications for the RLC-M-SF are available under requirement
LIGHT-nex ccaabblleessSUPER FLEXIBLE
RLC-M-SF series
p.54
#9
Typical Applications: light, on the road - AC cables - Discharge Lights
SUPER FLEXIBLE JACKET WITH TINNED COPPER CABLESSingle core cables with flexible tinned copper conductor, under double insulation: insulatedwith special M1 thermoplastic compound, under an external special M1 thermoplasticsheat (classified as M1 in accordance with Italian CEI 20-22). Flame and fire retardantmaterial NPI.
Multicore cables with flexible tinned copper conductor,insulated with special M1 thermoplastic compound,under an external special M1 thermoplastic sheat (classified as M1 inaccordance with Italian CEI 20-22).
www.referencelaboratory.com
RLC-M 08 SF
MODELRLC-M 01 SF
RLC-M 02 SF
RLC-M 03 SF
RLC-M 04 SF
RLC-M 05 SF
RLC-M 06 SF
N° OF CONDUCTOR1
1
1
1
1
1
AREA mm2
25
35
50
70
95
120
AWG3
2
1
1/0
4/0
4/0
OVERALL DIAMETER14,3
15,5
18,4
20,2
24,0
26,0
MODELRLC-M 07 SF
RLC-M 08 SF
RLC-M 09 SF
RLC-M 10 SF
RLC-M 11 SF
RLC-M 12 SF
RLC-M 13 SF
RLC-M 14 SF
RLC-M 15 SF
RLC-M 16 SF
RLC-M 20 SF
RLC-M 21 SF
RLC-M 23 SF
RLC-M 24 SF
RLC-M 25 SF
RLC-M 26 SF
RLC-M 27 SF
RLC-M 28 SF
RL-nex 19x4
N° OF CONDUCTOR3
3
3
10
5
19
19
2
2
2
7
3
5
3
3
25
3+4
3+3
19
AREA mm2
1,5
2,5
4
2,5
6
1,5
2,5
1,5
2,5
4
4
6
10
10
25
2,5
10+0,5
10+1,5
4
AWG15
13
11
13
9
15
13
15
13
11
11
9
7
7
3
13
7+30
7+15
11
OVERALL DIAMETER8,5
10,2
12,0
17,0
16,9
16,9
20
8,0
9,9
11
18,0
14,0
21,2
18
25,5
25,5
16
19
26
Typical Applications: Light/Live19 new additional models, “conductors and size as ZH” i.e. RLC-M08-SF=3X2,5
L IGHT I NG
Recommended by
andYASUKA CORPORATION
p.55
LIGHT-nex ccaabblleessNPI LSZH
RLC-M-ZH series#9
Typical Applications: light - fixed installations - Discharge Lights.
Multicore cables with flexible tinned copper conductor,insulated with special M1 thermoplastic compound,under an external special M1 thermoplastic sheat (classified as M1 in accordance with Italian CEI 20-11).Flame and fire retardant cable, with very low smoke and fume emission and without halogenidric gas emission;therefore those cables are recommended for installations which need maximum safety in case of fire:emergency lights, aeration systems, emergency telephone systems and emergency audio/voice evacuationsystems.
i.e. CONSTRUCTION 3X2,5 mm
Conductor (nxmm)External diameter (mm) Conductor diameter (mm)Insulation thickness (mm) Jacket thickness (mm)Nominal voltage (V)
48x0,25 tinned10,0 +0,23,45 +0,1 0,751,0300/500 V
ELECTRICAL CHARACTERISTIC
Electric resistance (Ohm/Km) Self extinguishing gradeUltimate % elongation Ultimate tensile stress unitary (Kg/mm2)After aging characteristics Temperature range (°C)
7,40positive (CEI normative)220 1,45without important variations30/80
www.referencelaboratory.com
RLC-M 09 SF
MODELRLC-M 01 ZH
RLC-M 02 ZH
RLC-M 03 ZH
RLC-M 04 ZH
RLC-M 05 ZH
RLC-M 06 ZH
N° OF CONDUCTOR1
1
1
1
1
1
AREA mm2
25
35
50
70
95
120
AWG3
2
1
1/0
4/0
4/0
OVERALL DIAMETER14,3
15,5
18,4
20,2
24,0
26,0
MODELRLC-M 07 ZH
RLC-M 08 ZH
RLC-M 09 ZH
RLC-M 10 ZH
RLC-M 11 ZH
RLC-M 12 ZH
RLC-M 13 ZH
RLC-M 14 ZH (450-759V)
RLC-M 15 ZH (0.6-1kV)
RLC-M 16 ZH (450-750V)
RLC-M 17 ZH (0.6-1kV)
RLC-M 18 ZH (450/750V)
RLC-M 19 ZH (0.6-1kV)
RLC-M 20 ZH
N° OF CONDUCTOR3
3
3
10
5
19
19
2
2
2
2
2
2
7
AREA mm2
1,5
2,5
4
2,5
6
1,5
2,5
1,5
1,5
2,5
2,5
4
4
4
AWG15
13
11
13
9
15
13
15
15
13
13
11
11
11
OVERALL DIAMETER8,5
10,2
12,0
17,0
16,9
16,9
20
8,0
9,9
9,6
11,0
11,0
11,8
18
High quality, very low attenuation 50ohm coaxial cable with double screen for effective RFI: and EMI interference rejection. Applications: for multi wirelessmikcrophone.
Micro-coaxial cable with 50 ohm impedance: a good attenuation/size compromise when spaceis a major concern. Applications: Installationand rack equipment assembling.
VIDEO ccaabblleessCOAXIAL
RVC series
p.56
#11
www.referencelaboratory.com
The RVC coaxial cables feature a high density double braided copper shield. They are the best choice where minimumattenuation is required. RVC01 is equivalent to standard RG59/H and can be substituted with confidence for anyapplication.Typical applications: SPDIF connections, Video connections, Ethernet, PC-network connections.
SPECIFICATIONS RVC01 (RG59 B/U) RVC02(RG58 C/U)Inner conductor (core) [mm] 0,60 (solid / red copper) 0,50 (19x0,18 / tinned)Core insulation PE PEScreen type Double braided >95% [red Braided (tinned)
+ red copper(1st screen)+ tinned copper(2nd screen)]
Capacitance (pF/m) 66 97Outer jacket PVC PVCNom. D.C.R. (Ω/m) <63 98Shield D.C.R. (Ω/m) <6,1 14Nom. Impedance (Ω) 75 50Overall diameter mm 6,1 5Attenuation @ 100MHz [dB/100m] 10 14Propagation velocity 66% 66%Weight [Kg/Km] 58 40Working temp °C -30 / +80
CONSTRUCTION and ORDERING CodesSuffix Reel Colours
RVC01 100m Gn (green), bk(black)under requirement
RVC02 100m white
CONSTRUCTION and ORDERING CodesSuffix Reel Colours
RVC 50/20 100m blackRRG 174 A/U 100m black
R E F E R E N C E • R V C 0 1
SPECIFICATIONS RVC 50/20 RRG 174 A/UInner conductor (core) 2,60 (red copper) Copper weld 7x0,16Core insulation PE PEScreen type Copper/My tape Tinned copper braid
+ red copper braidCapacitance (pF/m) 85 97Outer jacket PVC/PE ( upon request) PVCNom. Impedance (Ω) 50 50Propagation velocity 80% 66%Overall diameter [mm] 10,20 2,55Weight [Kg/Km] 137 11Working temp °C -30 / +70 -30 / +70
RVC-01
RVC-02
RVC 50/20 RRG 174 A/U
p.57
VIDEO ccaabblleessCOAXIAL
RVC series
VIDEO ccaabblleess RG59/E TypeCOAXIAL
RVC-E series#11
#11
www.referencelaboratory.com
CONSTRUCTION Inner conductorInsulation ShieldJacket
Copper weld Ø 0,58 mmPolyethylene Ø 3,70 mmBare copper braid coverage 95%PVC black Ø 6,10 mm
ELECTRICAL CHARACTERISTICSImpedanceVelocity of propagationCapacitanceMax oper. voltage
75 Ohm66%66 pF/m2300V
Typical Applications: network installation
ELECTRICAL CHARACTERISTICS
ImpedanceCapacitanceMax oper.voltagePropagation veloc.
75 Ohm66pF/m2300V66%
CONSTRUCTION
Inner conductorInsulationShieldJacket
Bare Copper Ø=0,58 mmPolyethylene Ø=3,70 mmBare Copper Braid Coverage 60%Black PVC Ø=6,10 mm
Coaxial video cable 75 Ohm, RG59 single shield, diameter 6,10mm, small budget because just one single shield.
Typical Applications: SPDIF connections, Video connections, PC-network connections. (Attenuation db/100 mt graphic on request)
RVC06E
RVC06
VIDEO ccaabblleessCOAXIAL
RVC series
p.58
#11
www.referencelaboratory.com
ELECTRICAL CHARACTERISTICSImpedanceVelocity of propagationCapacitanceMax. oper. voltage
50 Ohm66%97 pF/m500 V
Coaxial video cable 50 Ohm, RG213, diameter 10,30mm.
Typical Applications: SPDIF connections, Video connections, PC-network connections.(Attenuation db/100 mt graphic on request)
CONSTRUCTION Inner conductorInsulation ShieldJacketWeight
Tinned Copper Ø 7x0,40 mmPolyethylene Ø 7,20 mmBare copper braidPVC black Ø 10,30 mm155 Kg/Km
ELECTRICAL CHARACTERISTICSImpedanceVelocity of propagationCapacitanceMax oper.voltage
75 Ohm66%67 pF/m5000V
CONSTRUCTION Inner conductorInsulation Shield 1Shield 2JacketWeight
CuR Ø 1,60 mmPES Ø 10 mmNalTr CuSnPVC Ø 10,00 mm100 Kg/Km
ELECTRICAL CHARACTERISTICSImpedanceVelocity of propagationCapacitance
75 Ohm80%55 pF/m
Coaxial video cable 75Ohm, RG11 A/U, military standard C17/E Sat , diameter 10,30mm.
Typical Applications: SPDIF connections, Video connections, PC-network connections, Antennaconnections (Attenuation db/100 mt graphic on request)
Coaxial video cable 75 Ohm,SAT-16 RG11, diameter 10,00 mm. (Attenuation db/100 mt graphic on request).
Typical applications: SPDIF connections, Video connections, PC-network connections, Antenna Sat connections.
COLOURand PACKAGE
100mtReel
ColourBlack
COLOURand PACKAGE
100mtReel
ColourBlack
COLOURand PACKAGE
100mtReel
ColourBlack
COLOURand PACKAGE
100mtReel
ColourBlack
Coaxial video/Sat cable 75 Ohm, RG6 double shielded, diameter 6,80 mm.
Typical Applications: SPDIF connections, Video connections, PC-network connections.(Attenuation db/100 mt graphic on request)
CONSTRUCTION Inner conductorInsulation FilmShieldJacketWeight
Solid Bare Copper Ø 1,00 mmFoam Polyethylene Ø 4,50 mmAluminium Tape/My coverage 100%Tinned Copper Braid Coverage >80%PVC black Ø 6,80 mm53 Kg/Km
ELECTRICAL CHARACTERISTICSImpedanceVelocity of propagationCapacitanceInner conductor resistanceOuter conductor resistance
75 Ohm80%56 pF/m23 Ohm/Km8,3 Ohm/Km
CONSTRUCTION Inner conductorInsulation ShieldJacketWeight
Bare Copper Ø 7X0,75 mmPolyethylene Ø 7,20 mmBare Copper Braid PVC Ø 10,30 mm165 Kg/Km
RVC07
RVC08
RVC09
RVC10
p.59
VIDEO ccaabblleessCOAXIAL DIGITAL SDI
RDNT series#11
www.referencelaboratory.com
High quality, very low attenuation 75ohm video coaxial cable with double screen for effectiveRFI and EMI interferencerejection. A new range to meet the new digital video SDI. Typical applications: Connection new digital video SDI.
Inner conductor Solid red copperAWG # / Area [mm2] AWG 22 / 0.30 (red copper)Cond. D.C.R. 11 [Ω/Km]Inner conductor insulation PE1st Screen type Alluminium tape (wonded)2nd screen type Braided (tinned copper,
opt. coverage >90%)Screen D.C.R. 17 [Ω/m]Capacitance 55 [pF/m]Impedance 75 [Ω]Propagation velocity 80%O.D./ outer jacket material 4,5 [mm] / PVC Working temp. range -30 / +80 [°C]Weight 45 [Kg/Km]
SPECIFICATIONS
Video ccaabblleessTRIAXIAL
RVC series#11
Triaxial cables are used for connections between videocameras and related equipment. Triaxialcables feature two insulated shields for superior noise rejection ratios and either a solid or strandedcenter conductor. Typical applications: connections for: camera DC power, intercom to operator, teleprompterfeeds, monitoring feeds and even automatic or robotic functions.
SPECIFICATIONS RVC03 RVC04 RVC05Inner conductor (core) [mm] 1,00 / silver copper 1,40 / silver copper 2,16 / silver copperCore insulation PE PE PEShield silver copper braid silver copper braid Silver copper braidPrimary jacket PE PE PE2nd shield Red copper braid Red copper braid Red copper braidJacket PVC PVC PVCOverall diameter [mm] 8,50 11,00 14,00Working temp [°C] -30 / +70 -30 / +70 -30 / +70Characteristic impedance [Ω] 75 75 75Capacitance [pF/m] 56 56 56Propagation velocity [m/s] 80% 80% 80%
ATTENUATION5 MHz 1,80 1,13 0,8010 MHz [dB/100m:] 2,10 1,60 1,1050 MHz 5,95 3,58 2,60100 MHz 9,00 5,20 3,90
CONSTRUCTION and ORDERING CodesSuffix Reel Colours
RVC Red100 m
R E F E R E N C E • R V C 0 3
SUPER VHS ccaabblleessRS-VHS series
p.60
#11
www.referencelaboratory.com
MULTI VIDEO COAX RGB ccaabblleessRRGBseries#11
RS-VHS is a dedicated cable to well connected the Super VHS equipment .It is a coaxial with twoline in order to supply the transmission of the chrominance and luminance. For its flexibility has beenadopted a flexible PVC especially for the live applications where it is required.
CONSTRUCTION and ORDERING CodesSuffix Reel Colours
RS-VHS 100m BK (Black)
Inner conductors [mm] Tinned copperInsulation PE foamScreen type Tinned copper braidSingle cond. jacket PVC (white/yellow)Capacitance (pF/m) 56Outer jacket PVC (+ cotton fillers and TNT tape)Nom. D.C.R. (Ω/km) 62Shield D.C.R. (Ω/km) 30Nom. Impedance [Ω] 75Propagation velocity 80%Overall diameter [mm] 6,70Working temp [°C] -30 / +80Weight [Kg] 39
SPECIFICATIONS
The RRGB multicore 75 ohm coaxial cables feature a high density double braided copper shield.They are the best choice where minimum attenuation and space saving is a must. For its flexibilityhas been adopted a flexible PVC especially for the live applications where it is required.Typical applications: RGB connections, high definition video.
SPECIFICATIONS RRGB03 RRGB05 RRGB06Inner conductor # 3, tinned copper 5, tinned copper 6, tinned copperCore insulation PE foam PE foam PE foamScreen type Tinned copper braid Tinned copper braid Tinned copper braidCapacitance [pF/m] 57 57 57Single cond. jacket PVC PVC PVCNom. D.C.R. [Ω/km] 62 62 62Shield D.C.R. [Ω/km] 30 30 30Nom. Impedance [Ω] 75 75 75Propagation velocity 80% 80% 80%Outer jacket /O.D. [mm] PVC / 10,00 PVC / 11,00 PVC / 11,00Weight [Kg/Km] 13,5 16,5 22Working temp [°C] -30 / +80 -30 / +80 -30 / +80
CONSTRUCTION and ORDERING CodesSuffix Reel Colours
RRGB black100 m
RS-VHS
Minimum bending radius 15X OD
Minimum bending radius 15X OD
p.61
MULTI VIDEO COAX RGB ccaabblleess RRGB/AC series#11
MULTI VIDEO COAX RGB ccaabblleess RAVAC series#11
www.referencelaboratory.com
The RRGB/AC multicore 75 ohm coaxial cables plus Power in a unique jacket. They are the bestchoice for installation and live application For its flexibility has been adopted a flexible PVCespecially for the live applications where it is required.Typical applications: RGB connections in studio, broadcast OB van.
SPECIFICATIONS VIDEO VIDEO POWER ACInner conductor # 5, tinned copper 6, tinned copper 3x1.0 MMQScreen type Tinned copper braid Tinned copper braidCapacitance [pF/m] 57 57Single cond. jacket PVC PVCNom. D.C.R. [Ω/km] 62 62Shield D.C.R. [Ω/km] 30 30Nom. Impedance [Ω] 75 75Propagation velocity 80% 80%Outer jacket /O.D. [mm] PVC / 13,00 PVC / 16,00Weight [Kg/Km] 13,8 16,8Working temp [°C] -30 / +80 -30 / +80
CONSTRUCTION and ORDERING CodesSuffix Reel Colours
RRGB 05/ACRRGB 06/AC
blackblack
100 m100 m
Typical Applications: audio/video conference installations
VIDEO CONSTRUCTION
Inner conductorInsulation ShieldJacket
Tinned copperFoam PolyethyleneTinned Copper Braid, coverage>95%Black PVC Ø=2,60 mm
MICROPHONE 3x (2x0,14) CONSTRUCTION
Inner conductorInsulation ShieldTwisting
Jacket
Bare Copper Cross, Class5 XLPE Aluminium Tape+Drain WireAC 2x4,00 in center, 3RGB+3x(2x0,14) around with fillersBlack PVC Ø=2,80 mm
OVERALL
1 - Tape2 - Jacket
Non wovensBlack PVC Ø=22,0 mm
AC 2x4,00 mm CONSTRUCTIONInner conductor Insulation Jacket
Bare Copper Cross Section 4,00 mmPVC Blue/redBlack PVC Ø=11,00 mm
3x2x0,143xVIDEO
1
2
AC 2x4,00
filler
COLOURand PACKAGE
100mt
Reel
Colour
Black
RAVAC 01
Minimum bending radius 15X OD
Minimum bending radius 15X OD
COMPOSITE ccaabblleessRCC series
p.62
#11
www.referencelaboratory.com
RCC reporter series has been designed as a single high quality connection cable for all the signals of anintegrated audio-video transmission. Typical applications: Reporter set up from OB van to sport stadium, indoor, outdoor.
OVERALL – RCC01Composition (1) AC power 3x1,50 - (2) 6 Audio pairs AWG24 - (3) 8 general purpose AWG24 - (4) 4 Video coaxial Overall screen Braided cotton + overall >86% braided tinned copperJacket / color PVC / RedO.D. 16 [mm]Weight 428 [kg/km]
(1) – AC POWER CABLEAWG# / Area [mm2] AWG16 / 1,50 (red copper)Insulation /colors PVC / Blue-Brown-BlackOverall insulation Cotton tape over the 3 conductors+ double braided tinned copper screen + overall cotton tapeCond. D.C.R. [Ω/Km] <13Insulation resistance [MΩ/Km] >100Working voltage [V] 300/500Test voltage [kV] 2
(2) – AUDIO BALANCED LINESAWG# / Area [mm2] AWG24 / 0,22 (red copper)Screen 100% Lap, tinned copperCond. D.C.R. [Ω/Km] <86Insulation resistance [MΩ/Km] >100Capacitance cond/cond [pF/m] 60Capacitance cond/screen [pF/m] 110Insulation XLPE Pair jacket / colour PVC / BlackPair colours (white-blue) (white-red) (white-yellow) (white-green) (white-black) (white-grey)
(4) – COAXIAL VIDEOCore Tinned copperCore insulation PE foamInsulation resistance [MΩ/Km] >10000Screen >95% tinned copper braidCond. D.C.R. [Ω/Km] 62Impedance [Ω] 75Capacitance cond/screen [pF/m] 57Jacket / colours PVC / Black, Yellow, Red, Blue
(3) – UNBALANCED AUDIO / GENERAL PURPOSEAWG# / Area [mm2] AWG24 / 0,22 (red copper)Cond. D.C.R. [Ω/Km] <87Insulation resistance [MΩ/Km] >100Jacket / colours PVC / white, blue, red, yellow, green, grey, pink, brown
Minimum bending radius 18X OD
p.63
VIDEO COMPOSITE ccaabblleess RVC series#11
www.referencelaboratory.com
VIDEO CONSTRUCTIONInner conductorInsulation ShieldCoax Jacket
Bare Copper Ø=0,75 mmFoam polyethylene Ø=3,70 mmAluminium tape+Tinned copper braidPVC Ø 5,80 mm
OVERALLTotal jacketWeight
PVC black Ø 18,00 mm322 Kg/Km
AUDIO PAIRS CONSTRUCTIONInner conductor
Insulation Drain wireShield
Pair Jacket
Flexible Bare Copper wire 28x0,10XLPETinned CopperSpiral shield tinned copperPVC Ø 2,80 mm
It is a line designed to optimise in once overall jacket the coaxial (2 or 4) 75Ohm plus two balanced cable (intercom or any analogue additionalch)in order to meet the new generation of live digital console plus Ethernet cable very important for a circuit (network)with more digital console.
Typical Applications: to meet the digital live console for transmission data because in once jacket the mechanicalperformances is much better and faster for live applications.
ETHERNET CONSTRUCTIONInner conductorInsulation TwistingShieldCoax Jacket
Flexible Bare Copper Wire Polyethylene 2 cores to the pairAluminium tape+Tinned copper braidPVC Ø 6,20 mm
CONSTRUCTION Inner conductorInsulation ShieldCoax Jacket
Bare Copper Ø 0,75 mmFoam Polyethylene Ø 3,70 mmAluminium tape+Tinned copper braidPVC white Ø 5,80 mm
OVERALLTotal jacketWeight
PVC black Ø 15,00 mm412 Kg/Km
AUDIO PAIRS CONSTRUCTIONInner conductorInsulation Drain wireShieldPair Jacket
Flexible Bare Copper 28x0,10XLPETinned CopperSpiral shield tinned copperPVC Ø 2,80 mm
It is a line designed to optimise in once overall jacket the coaxial (2=RVC-59D or 4=RVC-59F) 75 Ohm plus two balancedcable (intercom or any analogue additional ch) in order to meet the new generation of live digital console.
Typical Applications: to meet the digital live console for transmission data because in once jacket the mechanicalperformances is much better and faster for live applications
ELECTRICAL CHARACTERISTICSElectrical resistance at 20°CCapacityVelocity Ratio Attenuation at 800MHz.Temperature for fixed useTemperature for movable useBehaviour with fire
43 Ohm/Km.54 pF/mt.80%24 dB/100mt.-30 +70°C-10+70°CNorm: IEC Cat: 332.1
ORDERING CodesReel Colour
RVC-59F 100mt Black
SuffixORDERING Codes
Reel Colour
RVC-59D 100mt Black
Suffix
COLOURand PACKAGE
100mtReel
ColourBlack
VIDEO & ETHERNET COMPOSITE ccaabblleess RVC series
#11
RVC-59D
RVC-59F
RVC-59D/Eth
Minimum bending radius 15X OD
Minimum bending radius 15X OD
COMPOSITE MULTI VIDEO ccaabblleessCoax RGBHV + AC 3x1,00 + 5xAWG24
RGB/AC/C series
p.64
#11
www.referencelaboratory.com
Typical Applications: Live, conference room/video projector
Typical Applications: audio/video conference installations.
VIDEO CONSTRUCTION Inner conductor
Insulation
Shield
Jacket
Tinned copper
Foam Polyethylene
Tinned Copper Braid Coverage>95%
PVC Ø=2,60 mm
red/green/black/blue/white
MICROPHONE CONSTRUCTION 3X2X0,14 MM Inner conductor
Insulation
Shield
Jacket
Plain Bare Copper
XLPE
Al/My tape drain wire
PVC Ø=3,20 mm
black whit white numbers
1XSDI CONSTRUCTION Inner conductor
Insulation
Shield
Shield
Jacket
Plain Bare Copper
Foam PE Ø=4,50 mm
Al/My/Al tape
Tinned Copper Braid
Black PVC Ø=6,00 mm
CONTROLConductor Jacket
5x 022 - AWG24 PVC
OVERALLFillerTapeOverall Jacket
PolypropileneNon wovensPVC Ø=15,00 mm
CONTROL = 5x0,14
(a) RGB05 composite cable
(b) Stage box
PC or DVD
video projector
APPLICATION
COLOURand PACKAGE
100mtReel
ColourBlack
MULTI VIDEO COAX ccaabblleess2XMINIVIDEO +1X SDI +3X MICROPHONE
RCMA/VR series#11
VIDEO CONSTRUCTIONInner conductor
Insulation
Shield
Jacket
Tinned copper
Foam Polyethylene
Tinned Copper Braid Coverage>95%
PVC Ø=2,60 mm
TWISTINGTape
Total Jacket
Approx. Weight
Cotton tape
red wine PVC Ø=16 mm
247 Kg/Km
RGB05/AC-C
RCMA/VR02
R E F E R E N C E • R C M A / V R 0 2
Minimum bending radius 15X OD
Minimum bending radius 15X OD
2XMINIVIDEO + 1XSDI + 4X MICROPHONE
Construction Reel Colours
2 balanced audio+ 1 video 75 Ohm
Bk (black)100m
p.65
COMPOSITE ccaabblleess MICROPHONEStereo/Coaxial/S-VHS/AC
RCMAV series#11
MULTI VIDEO COAX ccaabblleess RCMA/VR series#11
www.referencelaboratory.com
Versatile composite cables. An extremely compact cable featuring ideal for installation when the space is very limited.Typical Applications: Audio/Video S-VHSComplying to: IEC 228 (red copper), CE 120-35/IEC 332.1 (flame propagation)
TWISTING MICROPHONE 3X2X0,14 + VHS WITH FILTERTapeTotal jacketWeight
Non wovensPVC black Ø 12,40mm136 Kg/Km
MICROPHONE CONSTRUCTION 3X(2X0,14)mmInner conductor
Insulation TapeShieldJacketCapacitance cond./cond.Capacitance cond./shieldImpedance
Bare Copper Cross Section 0,14mm2XLPENon wovensTinned copper Coverage >90%PVC black Ø 3,20mm52 pF/m89 pF/m95 Ohm
2 VHS CONSTRUCTIONInner conductorInsulation ShieldJacketCapacitance Impedance
Tinned CopperFoam Polyethylene Tinned copper Braid Coverage>95%PVC Ø 2,60mm56 pF/m75 Ohm
CONSTRUCTION and ORDERING Codes SPECIFICATIONSScreen type Braided (tinned copper, > 90%) or Lap (tinned copper)Insulation material XLPE + Overall TNT tapeAWG # / Area [mm2] AWG 26 / 0,14 (red copper)O.D. / Jacket 3,20 [mm] / PVCInner conductors Tinned Insulation PE foamScreen type Tinned copper braid (>95%)Propagation velocity 80%O.D. / Jacket material 2,60 [mm] / PVCO.D. / Jacket material 11,00 [mm] / overall TNT tape + PVCWorking temp. range -30 / +80 [°C]
COLOURand PACKAGE
100mtReel
ColourBlack
micro coax75 Ohmsection
RCMAV01
RCMAV02
Typical Applications: audio/video conference installations.
MICROPHONE CONSTRUCTION 4X2X0,14 MM Inner conductor
Insulation
Shield
Jacket
Plain Bare Copper
XLPE
Al/My tape drain wire
PVC Ø=3,20 mm
black whit white numbers
1XSDI CONSTRUCTION Inner conductor
Insulation
Shield
Shield
Jacket
Plain Bare Copper
Foam PE Ø=4,50 mm
Al/My/Al tape
Tinned Copper Braid
Black PVC Ø=6,00 mm
VIDEO CONSTRUCTIONInner conductor
Insulation
Shield
Jacket
Tinned copper
Foam Polyethylene
Tinned Copper Braid Coverage>95%
PVC Ø=2,60 mm
TWISTING
Tape
Total Jacket
Approx. Weight
Cotton tape
Blue PVC Ø=16 mm
247 Kg/Km
RCMA/VR03-AC2XMINIVIDEO +1X SDI +4X MICROPHONE + AC 3x2.5
3x 2.5
AC CONSTRUCTION
Colour
Blue - Brown -Yel/Gr
COMPOSITE ccaabblleessMICROPHONE STEREO/COAXIAL/S-VHS/AC
RCBM series
p.66
#11
www.referencelaboratory.com
COMPOSITE MICRO CIRCULAR ccaabblleess Home Theather
RHT series#11
CONSTRUCTION and ORDERING CodesConstruction Reel Colours
1 balanced audio+2 video 75Ohm+Power 3x075 Bk (black)100 m
Capacitance 52 [pF/m]Nom. Impedance 95 [Ohm]Screen type Braid (tinned copper, >90%)Insulation material XLPE + Overall TNT tapeAWG # / Area [mm2] AWG 26 / 0.14 (red copper)O.D. / Jacket 3,20 [mm] / black PVC
Inner conductors Tinned copperInsulation PE foamScreen type Tinned copper braid (>95%)O.D. / Jacket 2.60 [mm] / PVC
Inner conductors Bare copper, 0.75mm2 (AWG18)Insulation PVC (blue/brown/yellow-green)Screen type Tinned copper braid (>95%)O.D. / Jacket 6.00 [mm] / Black PVC with cotton fillers
O.D. / Jacket 13,00 [mm] / overall TNT tape + black PVCWorking temp. range -30 / +80 [°C]Weight 280 [Kg/Km]
SPECIFICATIONS
Microphone section
VHF Section
AC Line Section
A versatile composite cable. An extremely compact cable featuring two VHS lines, a low profile high qualitymicrophone channel, and a shielded AC power connection. The overall TNT tape it’s the lightweight solution thatprovides extra mechanical reliability over time.Typical applications: Broadcast mobile to connect with cameras.Complying to: IEC 228 red copper
CEI 20-35 / IEC 332.1 flame propagation
RCBM01
Typical Applications: home theater
SPEAKER CONSTRUCTIONConductor Tinned Copper Cross Section 1,00mm2
MICROPHONE CONSTRUCTIONInner conductor InsulationDrain Wire Shield
Bare Copper Ø= 18x0,10mmPolyolephyne Ø= 1,00mmTinned copperAluminium tape
VIDEO CONSTRUCTIONInner conductorInsulationShield
Tinned CopperFoam PolyethyleneTinned Copper Braid Coverage >95%
(6 speaker) (2 audio microphone) (5 video RGBHV)
COLOURand PACKAGE
100mt
Reel
Colour
Black
RHT 625
p.67
OBVAN COMPOSITE ccaabblleessSUPER FLEXIBLE
ROB-C series#11
3xVHS CONSTRUCTIONInner conductorInsulation ShieldJacket
Bare copper IEC 332/IFoam PolythyleneTinned copper braid coverage >90%White PVC with numbers Ø 2,6 mm
1X(2X022) MICROPHONE CONSTRUCTIONInner conductorInsulation ShieldJacket
Bare copper Cross Classe5 IEC228XLPE nat/redTinned copper spiralBlack PVC Ø 2,8 mm
TOTAL TWISTINGTapeTotal JacketWeight
Non wovensPVC Ø 10mm116 Kg/Km
Typical Applications: Ob-Van wiring, audio/video room wiring, local studio control.
COLOURand PACKAGE
100mt
Reel
Colour
Black
2x0,22
3xVHS
Set-up A
Set-up B
Set-up C (Optional)
APPLICATION
RLAReference Lab Application
www.referencelaboratory.com
ROB-C 01
OBVAN COMPOSITE + AC ccaabblleessSUPER FLEXIBLE JACKET
ROB-C/ACseries #11
Typical Applications: OB-Van wiring, audio/video room wiring, local studio controll with AC LINE included
COLOURand PACKAGE
100mtReel
ColourBlack
3xVHS CONSTRUCTIONInner conductorInsulation ShieldJacket
Tinned copper IEC332/I Foam PolyethyleneTinned Copper Braid, coverage>90%White PVC with numbers Ø=2,60 mm
1X(2X022) MICROPHONE CONSTRUCTION Inner conductorInsulation ShieldJacket
Bare Copper Cross Classe5 IEC228 XLPE Nat/RedTinned Copper SpiralBlack PVC Ø=2,80 mm
TOTAL TWISTINGTapeTotal JacketWeight
Non wovensPVC Ø=11,3 mm163 Kg/Km
3x1,00 CONSTRUCTION Inner conductor Insulation Colours
Bare CopperPVC Ø=2,00 mm Blue, brown, yellow-green
ROB-C 01/AC
ROBC-01 50mt.
Cameraman
Cameraman
ROBC-01 50mt.
ROBC-01 50mt.
ROBC-01 3mt.
Minimum bending radius 15X OD
VIDEO COMPOSITE ccaabblleessFisher Boom
RFBC series
p.68
#11
A versatile composite cable. An extremely compact cable featuring two VHS lines, three low profile high qualitymicrophone channel, and a shielded AC power connection. VERY FLEXIBLE.Typical Applications: Films and broadcast mobile to connect with the camera
OVERALLTapeJacketWeight
Non wovensPVC black Ø 16,00 mm IEC 332/1280 Kg/Km
MICROPHONE CONSTRUCTION 3X(2X0,14)mmInner conductor
Insulation TapeShieldJacketCapac. Cond. Cond.Capac. Cond. ShieldImpedance
Bare copper cross section 0,14mmq, classe5XLPENon wovensTinned copper coverage >90%PVC black Ø=3,20mm52 pF/m89 pF/m95 Ohm
3X1 FROR CONSTRUCTIONInner conductor Insulation Jacket
Bare copper cross section 1,00 mmqPVC Blue, brown, yellow-greenPVC black Ø 6,00 mmMinimum bending radius 15X OD
2 VHS CONSTRUCTIONInner conductorInsulation ShieldJacketCapacitanceImpedance
Tinned Copper IEC228Foam polyethyleneTinned copper braid coverage >95%PVC Ø 2,60mm56 pF/m75 Ohm
Mechelen, 20th July 2003
Optimizing FISHER BOOM CABLE(a) & RDC CABLE DRUM (b) (c) was obteined a Faster installation & Better improvement for Sound & Video Results
Stage Track BvBa is specialized in Sound Recording for TV and Film. For our booms Mole &Richardson and Fisher, Reference according our demand and rule fixed the multicore cableRFBC01.Meanwhile we have already make 3 series and 1 film. The results are fantastic and unique.Thanks to this cable, people in Europe can listen at a brilliant and disturbance free sound on Tv andcinema theatre. Working with Reference Laboratory was a pleasure and I advice this to anyone. Theservice was perfect and the people very friendly. Thanks again
Erik Rycken [email protected]
Boom camera & microphone
local stagebox (c)
main stage (b)
RFBC01 40 mt (a)
extension / fan
2
1
Mixer
COLOURand PACKAGE
100mtReel
ColourBlack
www.referencelaboratory.com
RFBC01
3 microphone cables 2x0,14
3x1 FROR
2 VHStape wovens / non- wovens
Jacket in PVC
REFERENCE • RFCB HI.Q: Composite video cable
Typical Applications: Conference room wiring, portable A/V conference wiring
p.69
VIDEO CONFERENCE COMPOSITEccaabblleess
VIC series
TOTAL TWISTING TapeTotal jacketWeight
Non wovensPVC Ø=17,6 mm337 Kg/Km
COLOURand PACKAGE
100mtReel
ColourBlack
COLOURand PACKAGE
100mtReel
ColourBlack
2xRCA CONSTRUCTIONInner conductorInsulation Shield
Jacket
Bare copper Ø=0,80 mmFoam PolyethyleneAluminium Tape + Tinned Copper BraidPVC Ø=5,80 mm
MICROPHONE CONSTRUCTION 8x(2x0,22)Inner conductor
Insulation ShieldJacket
Bare Copper, cross section 0,22 mm2, Class5, IEC228XLPE Nat/RedTinned Copper SpiralBlack PVC Ø=2,80 mm
2xRCA CONSTRUCTIONInner conductorInsulation Shield
Jacket
Tinned copper IEC332/I Foam PolyethyleneTinned Copper Braid, coverage>90%White PVC with numbers Ø=2,60 mm
TOTAL TWISTING TapeTotal jacketWeight
Non wovensPVC Ø=14,8 mm254 Kg/Km
MICROPHONE CONSTRUCTION 8x(2x0,22)Inner conductor
Insulation ShieldJacket
Bare Copper Class5IEC228 XLPE Nat/RedTinned Copper SpiralBlack PVC Ø=2,80 mm
2xRCA
8x2x0,22
2xVHS
8x2x0,22
#11
Typical Applications: Conference room wiring, portable A/V conference wiring
www.referencelaboratory.com
RVIC 01
RVIC 02
INTERCOM ccaabblleess RCOM-C series#4
CONSTRUCTIONInner conductorInsulationCore arrang.ShieldJacketWeight
Bare Copper Cross Section 0,34 mm2PE red/black+blue/nat Ø=1,60 mm4 conductors twisted in concentric layersAlu/my foil tape coverage 100% + Drain wireBordeaux PVC Ø=6,80 mm61 Kg/Km
ELECTRICAL CHARACTERISTICSCond.Ohm resistanceCond/cond. capacitanceCond/shield capacitanceInsulation resistanceImpedance
Service temperature
<56 Ohm/Km65 pF/m102 pF/m>10.000 Mohm x Km110 Ohm red/blue,102 Ohm black/white-20°C / +70°C
COLOURand PACKAGE
100mtReel
ColourBordeaux
This series are 4 wires for intercom field is available also in Polyurethane jacket.Application: long distance intercom connection.
same as RCOM-C01 except shield in foil + tinned braid copper
RCOM-C01
RCOM-C02
IIssttiittuuttoo IIttaalliiaannooddeell MMaarrcchhiioo ddii QQuuaalliittàà
LLooww vvoollttaaggee ddiivviissiioonnInsulated cables and adhesive tapes
Test Report n° 01S99A0013(*) Multicore cable mod. RSC # ZH andRSCS # ZH (overall shield)
Product type:
Multicore cable for audio applications, not flame-propagatingand with low smoke and toxic/corrosive gases emissions.
Tests purpose (determination of):
• Corrosiveness value of the cable components ➊• Halogen-hydric acids quantities in the cable components ➋• Toxicity value of the cable components ➌• Opacity of the smoke (whole cable) ➍• Flame-propagation resistance (whole cable) ➎
Specifications:
➊ CEI 20-37/3: 1997-09 Part 3 “determination of the corrosi veness value of the gases by pH and conductivity measures” (equivalent to IEC 60754-2);
➋ CEI 20-37/2: 1997-09 Part 2 “determination of the quantity of gaseous halogen-hydric acids”;
➌ CEI 20-37/7: 1997-09 Part 7 “toxicity measures of the gas emissions produced by cables”;
➍ CEI 20-37/4-5: 1997-09 “density measures of the smoke emissions produced by the combustion of electrical cables ”;
➎ CEI 20-22/3: Fire tests on electrical cables - Part 3 “tests on multicore cables”.
• The products tested comply with the standards above. • This result is extended to all the models of RSC-ZH
and RSCS-ZH series* This is only a partial reproduction; the complete report
is available by request*.
www.referencelaboratory.com
RLAReference Lab Application
the LowSmokeZeroHalogen cable series... where compliance
does mean qualityfire proof and low smoke emission together with flexibility and outstanding audio response
Multicore Cable * Test report 22 november 1999
Multicore Cable * Test report 12 november 1999
Microphone Cable 110 Ω, 2 Conductors sez. 0,185 mm2
(48 x 0,70) Red Copper LSZH Double Braided
AC/LINE cable 3 x 1,50 + 2 x AWG22 (TWIN)* Italian Istitute for Quality
75 Hom Coaxial for new format video digital
75 Hom Coaxial video RG 59
The full set ofcables to be ableto design andclose a projectunder the INTERNATIONALSTANDARDIEC332.1 & IEC 332.3
Ø 4,50
Ø 6,10
Ø 14,1
Ø 14,6
Ø 5,50
QUALITYSYSTEMCERTIFICATE
standardISO 9002/EN2902
RSC 12ZH
RSC S12ZH
RMC09 ZH
RPLC05 ZH
RDNT02 ZH
RVC01 ZH
RPC08 ZH
RPC09 ZH
2X2,5 FROR - RPC08 ZH
• Insulation resistance a 20°C >200 Mohm*Km• Capacitance 70 pF/m• Ohm. Cond. Resistance 7,7 Ohm/Km• Temperature range -30°C + 70°C• Nominal Voltage 50 V• Test Voltage 3000 V
4X2,5 FROR - RPC09 ZH
• Insulation resistance a 20°C >200 Mohm*Km• Capacitance 70 pF/m• Ohm. Cond. Resistance 7,7 Ohm/Km• Temperature range -30°C + 70°C• Nominal Voltage 50 V• Test Voltage 3000 V
www.referencelaboratory.com
R E F E R E N C E • R P L C 0 5 Z H H I . Q :
MULTICORE ccaabblleessLow Smoke Zero Halogen
RSC ZH seriesRSC-S ZH series
p.72
#12
www.referencelaboratory.com
The RSC/ZH Series of multichannel microphone cables offers the same advantages and performance of thetraditional RSC models. The LSZH insulation material used makes it a mandatory choice where permanentinstallations are needed – especially public spaces and professioanal audio permanent wiring as studio mixingconsoles and equipment.Typical Applications: Pro audio permanent installations, public sites (hospitals, theaters, cinemas,…).
Complying to: ASIM B33-91 tinned copperCEI 20-11 termoplastic compound characteristicsCEI 20-34 tests methods for thermoplastic materialsCEI 20-35 / IEC 332.1 flame propagationCEI 20-22 III / IEC 332.3 fire propagationCEI 20-27 I / IEC 754.1 hydrochloric acid emissionsCEI 20-37 III-A / IEC1034 smoke opacityCEI 20-37 II toxic gases emission
CONSTRUCTION and ORDERING CodesMod. Pairs Reel Colours
mod. RSC/ZH 12 12 Gr (grey)100 m
SPECIFICATIONSCapacitance cond/cond 80 [pF/m]Capacitance cond/screen 150 [pF/m]Cond. D.C.R. 0.083 [Ω/m]Screen type (each pair) Tinned copper (lap 100%)Shield D.C.R. 0.04 [Ω/m]Nom. Impedance 75 [Ω]Attenuation @ 1MHz 2.1 [dB/100m]Working temp. range -40 / +80 [°C]AWG # / Area [mm2] Channel AWG 24 / 0.22 - 28/0.10 (tinned copper)Qty /mm Drain wire AWG 24 / 0.20 - 18/0.12 (tinned copper)O.D. / jacket material 14,00 [mm] / LSZH thermoplasticCh. O.D. [mm]/ insul.type 1.0 / PEPair O.D. [mm]/insul. type 2.9 /LSZH thermoplastic Weight 230 Kg/Km
123456789101112131415
BrownRed
OrangeYellowGreenBlue
PurpleGreyWhiteBlackBrownRed
OrangeYellowGreen
16 Blue
PurpleGreyWhiteBlackBrownRed
OrangeYellowGreenBlue
PurpleGreyWhiteBlackBrownRed
OrangeYellowGreenBlue
PurpleGreyWhiteBlackBrownRed
OrangeYellowGreenBlue
PurpleGrey
17181920212223242526272829303132
33343536373839404142434445464748
Grey
Orange
Orange
Grey
Red
White
Yellow
CORE N° COLOUR OF ONEOF THE PAIR
CORE JACKETCOLOUR CORE N° COLOUR OF ONE
OF THE PAIRCORE JACKET
COLOUR CORE N° COLOUR OF ONEOF THE PAIR
CORE JACKETCOLOUR
QUALITYSYSTEMCERTIFICATE
standardISO 9002/EN2902
RSCS - ZH same specification + overall screen
p.73
MULTICORE ccaabblleessLow Smoke Zero Halogen AC/LINE
RPLC ZH series#12
SPEAKER ccaabblleessLSZH
RPLC ZH series#12
www.referencelaboratory.com
The RPLC05 is designed, to meet the standard safety requirements where LSZH materials are specificated.Typical Applications: Pro audio permanent installations, public sites (hospitals, theaters, cinemas,…).Complying to: IEC 228 red copper
CEI 20-11 thermoplastic compound characteristicsCEI 20-34 tests methods for thermoplastic materialsCEI 20-35 / IEC 332.1 flame propagationCEI 20-22 III / IEC 332.3 fire propagationCEI 20-27 I / IEC 754.1 hydrochloric acid emissions CEI 20-37 III-A / IEC1034 smoke opacityCEI 20-37 II toxic gases emission
CONSTRUCTION and ORDERING CodesMod. Colours
RPLC/ZH 05, 2 x 0,34 + 3 x 1,50 Bk (black)Reel100m
Capacitance 40 [pF/m]Inductance < 0,6 mH/KmCond. D.C.R. 0.056 [Ω/m]Screen type Foil (Al-My, 100%)+
Braided (tinned copper, >9 0%)Shield D.C.R. 0.018 [Ω/m]Nom. Impedance 110 [Ω]Insulation material PEMax. oper. Voltage 1000 [V]AWG # / Area [mm2] AWG 22 / 0.34 (red copper)Insulation resistance > 100 MΩ/KmAWG # / Area [mm2] AWG 15 / 1.50 (red copper) Conductor insulation NPI PVC (IEC 332.1) Overall jacket insulation material LSZH thermoplasticWorking temp. range -20 / +70 [°C]Weight 202 [Kg/Km]
Microphone section
SPECIFICATIONSPECIFICATIONS
AC power section
R E F E R E N C E • R P L C 0 5 Z H
RPC 08 LSZH 2 x 2,5 (AWG13) <7,5 70 LSZH compound >200 -30/+70 10 13,6RPC 09 LSZH 4 x 2,5 (AWG13) <7,5 70 LSZH compound >200 -30/+70 12 23,5
CONSTRUCTION / MECHANICAL
AWG# / Area[mm2]*
Cond. D.C.R.[Ω/Km]
Capacitance[pF/m] Jacket
Insulationresistance[MΩ/Km]
Workingtemp. range
[°C]
Size[mm]
Weight[Kg/100Mt]
MODEL
Designed for amplifier to loudspeaker connections, the RPC cables can really make the difference when maximumpower transfer, superior sonic transparency , and mechanical reliability are essential. The RPC LSZH Speaker Seriesoffers the same sonic quality of traditional RPC Series but is intended for permanent installations.Typical applications: For fixed audio installations.Available colour: Gr (grey) and bk(black).
R E F E R E N C E • R P C 0 8 L S Z H
MICROPHONES ccaabblleessLow Smoke Zero Halogen
RMC ZH series
p.74
#12
www.referencelaboratory.com
RMC09 ZH is designed to supply the balance line into the fixed installation where are required LSZHmaterials.Its electric performance is able to cover also long distance with lower loss and wider frequencyresponse.Typical applications: fixed installations.Complying to: IEC 228 red copper
CEI 20-11 termoplastic compound characteristicsCEI 20-34 tests methods for thermoplastic materialsCEI 20-35 / IEC 332.1 flame propagationCEI 20-22 III / IEC 332.3 fire propagationCEI 20-27 I / IEC 754.1 hydrochloric acid emissions CEI 20-37 III-A / IEC1034 smoke opacityCEI 20-37 II toxic gases emission
CONSTRUCTION and ORDERING CodesMod. Pair Colours
RMC 09/ZH Bk (black)1Reel100m
Cond. D.C.R. 0.083 [Ω/m]1st screen Lap (clockwise, 100% opt. coverage)2nd screen Lap (counterclockwise, >95% opt. coverage)Shield D.C.R. 0.04 [Ω/m]AWG # / Area [mm2] AWG 24 / 0.185 Qty /mm 48/0.07 (red copper)Ch. O.D. [mm]/ insul.type 1.8 / PPFillers LSZH soft materialO.D. / jacket material 5,50 [mm] / LSZH thermoplasticNom. Impedance 110 [Ω]Working temp. range -40 / +80 [°C]
SPECIFICATIONSPECIFICATIONS
QUALITYSYSTEMCERTIFICATE
standardISO 9002/EN2902
RMC 09
p.75
VIDEO ccaabblleessLow Smoke Zero Halogen
RVC ZH series#12
www.referencelaboratory.com
Inner conductor Solid red copperAWG # / Area [mm2] AWG 19 / 0.60 (red copper)Cond. D.C.R. 0.063 [Ω/m]Inner conductor insulation PE1st Screen type Braided (red copper, opt. coverage >9 5%)Screen D.C.R. 0.0063 [Ω/m]2nd screen type Braided (tinned copper, opt. coverage >95%)Capacitance 66 [pF/m]Impedance 75 [Ω]Propagation velocity 65%Max. oper. voltage 3 [KVolt]Insulation resistance > 10000 MΩ/KmO.D./ outer jacket material 6,1 [mm] / LSZH thermoplasticWorking temp. range -30 / +80 [°C]Weight 58 [Kg/Km]
SPECIFICATION
The RVC ZH coaxial cable offers the same advantage and performances of traditional RVC models . The LSZHinsulation material makes it mandatory where permanent installations are needed. Typical applications: Video fixed installation,TV,post production.Complying to: ASIM B33-91 tinned copper
IEC 228 red copperCEI 20-11 termoplastic compound characteristicsCEI 20-34 tests methods for thermoplastic materialsCEI 20-35 / IEC 332.1 flame propagationCEI 20-22 III / IEC 332.3 fire propagationCEI 20-27 I / IEC 754.1 hydrochloric acid emissions CEI 20-37 III-A / IEC1034 smoke opacityCEI 20-37 II toxic gases emission
CONSTRUCTION and ORDERING CodesMod. Coax. Colours
RVC 01/ZH BlackRG59 B/U typeReel100m
SPECIFICATIONS
RVC 01/ZH
RDMX01 PUR
RMC 13 PUR
REFERENCE • RDMX01 PUR HI.Q:
REFERENCE • RMC13 PUR HI.Q
www.referencelaboratory.com
VIDEO ccaabblleessLow Smoke Zero Halogen Coaxial Digital SDI
RDNT series
p.76
#12
High quality, very low attenuation 75ohm video coaxial cable with double screen for effectiveRFI and EMIinterference rejection. LSZH insulation material makes the definitive solution for permanent installations.The same top audio quality provided by it’s general purpose twin RDNT01 is guaranteed.Typical applications: any public and private space permanent TV network installation.
Complying to: ASIM B33-91 tinned copperIEC 228 red copperCEI 20-11 thermoplastic compound characteristicsCEI 20-34 tests methods for thermoplastic materialsCEI 20-35 / IEC 332.1 flame propagationCEI 20-22 III / IEC 332.3 fire propagationCEI 20-27 I / IEC 754.1 hydrochloric acid emissions CEI 20-37 III-A / IEC1034 smoke opacityCEI 20-37 II toxic gases emission
Reference Laboratory is always looking for innovative construction techniques and materials to serve the effective answers for professional applications. This is the first time that polyurethane materials are used. In fact they bring quite a few benefits as: • wide temperature range (-40/+80°C) • nice touch feeling • high abrasion hardness • high resistance to mineral oils • mechanical reliability • nice aspect (light absorbing surface) RMC-13 PUR Suited for long cable runs as in delay line connections. It brings extra advantages as it has ahigh abrasion hardness, it is skein-friendly and mechanically reliable RDMX01 PUR This cable is an excellent solution for high quality balanced data connections (like DMXprotocoll in ligthing applications)
Inner conductor Solid red copperAWG # / Area [mm2] AWG 19 / 0.30 (red copper) Cond. D.C.R. 0.060 [Ω/m]Inner conductor insulation PE1st Screen type Alluminium tape (wonded)2nd screen type Braided (tinned copper, opt. coverage >90%)Screen D.C.R. 0.017 [Ω/m]Capacitance 56 [pF/m]Impedance 75 [Ω]Propagation velocity 80%O.D./ outer jacket material 4,5 [mm] / LSZH thermoplasticWorking temp. range -30 / +80 [°C]Weight 5,8 [Kg/100Mt]
SPECIFICATIONS
CONSTRUCTION and ORDERING CodesMod. Video Coax. Colours
RDNT 02/ZH Green75 ohmReel100m
RDNT 02/ZH
POLYURETHANE ccaabblleessPUR series#13
p.77
POLY ccaabblleess POLYCAB series#13
www.referencelaboratory.com
Reference Laboratory is always looking for innovative construction techniques and materials to serve theeffective answers for professional applications. The new “POLY-CABLE” family features two series namedPolycab and Microfly.This is the first time that polyurethane materials are used. In fact they bring quite a few benefits as:• high flexibility over a wide temperature range (-40/+80°C)• nice touch feeling • high agrasion hardness • high resistance to mineral oils• mechanical reliability • nice aspect (light absorbing surface)
RMC-11 PolyCab. Suited for long cable runs as in delay line connections. It brings extra advantages as it has a high abrasion hardness, it is skein-friendly and mechanically reliable
RMCQ-02 PolyCab This QUAD cable is an excellent solution for high quality balanced connections in live applications also thanks to its good behaviour when made into skeins.
RMIC-05 MicroFly Best solution for microphone connections with mobile stage designs (TV, Theatre), where abrasion hardness, lightness, flexibility, and mechanical reliability are a must.
RIC-11 PolyCab The answer for the most demanding and dynamic guitar players. It also shows an excellent touch feeling at very low operating temperatures.
SPECIFICATIONS RMC11 RMCQ02 RMIC05 RIC11Capacitance cond/cond [pF/m] 50 46 52 -Capacitance cond/screen [pF/m] 87 78 89 78Inductance mH/Km <0,6 <0,6 <0,6 <0,4Cond. D.C.R. [Ω/km] <56 <82 <135 <36Screen type >95% tin. copper >90% tin.copper 100% tin. copper Semiconductive sheath
braid + TNT tape braid + TNT tape Lap + TNT tape + tin. copp. braid >95%Nom. Impedance [Ω] 100 110 95 -Insulation material XPLE XPLE XPLE PE foamTest voltage [kV] 1 (DC) 1 (DC) 3 (DC) 2 (15sec)Insulation resistance [MΩ/Km] >100 >100 >10000 >10000AWG # / Area [mm2] AWG22 / 0,34 AWG24 / 0,22 AWG26 / 0,14 AWG20 / 0,50
Qty x [mm]. red copper red copper red copper red copperO.D. / Overall jacket [mm] 6 / black TPF 6 / black TPF 4,2 / black TPF 6,8 / black TPFinsulation material Working temp. range [°C] -40 / +80 -40 / +80 -25 / +80 (static) -40 / +80
-15 / +80 (flexing)Weight [Kg/100Mt] 4,8 5,0 2,2 6,2
www.referencelaboratory.com
Ethernet ccaabblleessRSFTP series
p.78
#12
Ethernet FTP Super Flex ccaabblleessRSFTP-SF series#12
Ethernet cable CAT5e designed for INSTALLATION to respect the standard CEI20/22, IEC332.1.Typical Applications: Mobile installation, Ethernet connection
CONSTRUCTIONInner conductor Insulation Drain Wire Tape Shield
ShieldJacket
Solid Bare Copper AWG24PolyolephyneSolid Tinned CopperPolyestereAluminium Tape/Polyestere Foil coverage 100%Tinned Copper BraidPVC Ø 6,00mm, Grey Ral 7035
ELECTRICAL CHARACTERISTICSCond. Ohm resistanceCapac. Between conductorsInsulation resistancePropagation velocityTemperature range
77 Ohm/Km62 pF/m>7000 Ohm*Km66%-20°C +60°C
CONSTRUCTIONInner conductorInsulation Drain Wire Tape Shield
ShieldJacket
Solid Bare Copper AWG24PolyolephyneSolid Tinned CopperPolyestereAluminium Tape/Polyestere Foil coverage 100%Tinned Copper BraidPVC Ø 6,2 mm
ELECTRICAL CHARACTERISTICSCond. Ohm resistanceCapac. Between conductorsInsulation resistancePropagation velocityTemperature range
77 Ohm/Km62 pF/m>7000 Ohm*Km66%-20°C +60°C
Typical Applications: Mobile installation, Ethernet connection
COLOURand PACKAGE
100mtReel
ColourBlack
R E F E R E N C E • R S F T P 0 2 F
CONSTRUCTION 4x2x24 AWGInner conductorInsulation Tape
ShieldJacket
Bare Copper cross section 0,22 mm2 PVC Ø=1,00 mm white+white-green/orange+white-orange/blue+white-blue/brown+white-brownCotton TapeBare Copper spiralBlack PVC Superflex Ø=6,00 mm
ELECTRICAL CHARACTERISTICSCond.Ohm resistanceInsulation resistanceCapacitance between cond.Capacity cond./shieldTemperature range
86 Ohm/Km>40 Ohm*Km97pF/m152pF/m-20°C / +60°C
Typical Applications: Mobile installation, Ethernet connection with Super Flexible performance
COLOURand PACKAGE
100mtReel
ColourBlue
RS FTP01
RSFTP02F
RSFTP02 SF
Available also unshielded model: RUTP03
www.referencelaboratory.com
p.79
Ethernet Cat6 FTP series#12
Drain Wire
Foil
Copper Braid
Drain Wire
Foil
Typical Applications: Ether Sound and Data Net Applications
Live series Reference Ethernet cable is a NEW series designed for Live applications as today required the last technologiesin audio transmission and control under Ethernet protocol. All Reference Live series cables are manufactured with specialcompound for give better flessibility, life time without changing the electrical and mechanical characteristics. We also sellthis cable, for give total solution, assembled with Reference cable drum (RDC or RDQC series) and Neutrik Rj connectors Typical Applications: Ethernet CAT5e connection between stage unit and FOH - Digital console - Line array control
CONSTRUCTION 4x2x24 AWG
Inner conductorInsulationDrain wireTapeShieldShieldJacket
Solid Bare Copper PolyethyleneTinned copperPolyesterAluminium/Polyester foil, coverage >100%Tinned copper braidPVC Ø=7,00 mm Grey RAL 7035
ELECTRICAL CHARACTERISTICS
Cond.Ohm resistanceInsulation resistanceCapacity between conductorsPropagation velocityRange temperature
77 Ohm/Km >7000 Ohm*Km62pF/m66%-20°C / +60°C
COLOURand PACKAGE
100mtReel
ColourGrey
CONSTRUCTION 4X2X022mmq
Inner conductorInsulationStrandingInner jacketJacket
Solid Bare Copper PolyolephyneCores twisted to a pairTPEXLPE O.D. 6,0mm -mini. bending radius 8xOD
ELECTRICAL CHARACTERISTICS
Cond.Ohm resistanceInsulation resistanceCapacity between conductorsRange temperature
<90 Ohm/Km >7000 Ohm*Km53pF/m-20°C / +70°C
COLOURand PACKAGE
100mt
Reel
Colour
Black
RS-FTP-05
R-FTP-04
REL-01
R-UTP-03
LIVE series#12
Ethernet ccaabblleess
REFERENCE • REL-01 HI.Q: Ethernet
Ethernet cable CAT5e designed for LIVE application as many digital console and some line array today request Typical Applications: Ethernet connection between stage unit and FOH - Digital console - Line array control
Ethernet ccaabblleessLIVE series
p.80
#12
www.referencelaboratory.com
RSF DE01
CONSTRUCTIONInner conductor Insulation Drain Wire ShieldOverall Jacket
Solid Bare Copper AWG24XLPE-- PVC Ø 14,50mm, Black
ELECTRICAL CHARACTERISTICSCond. Ohm resistanceCapac. Between conductorsInsulation resistancePropagation velocityTemperature range
77 Ohm/Km53 pF/m>7000 Ohm*Km66%-20°C +70°C
As RSFDE01 Plus including N.2 balanced line cable for utility ( like intercom and or DMX data) Typical Applications: Ethernet connection between stage unit and FOH - Digital console - Line array control
RSF DE02
CONSTRUCTIONInner conductor Insulation Drain Wire TapeShieldOverall Jacket
Solid Bare Copper AWG24XLPE-Polyestere- PVC Ø 14,50mm, Black
ELECTRICAL CHARACTERISTICSCond. Ohm resistanceCapac. Between conductorsInsulation resistancePropagation velocityTemperature rangeMinimum bending radius
77 Ohm/Km53 pF/m>7000 Ohm*Km66%-20°C +70°C15X OD
AUDIO CONSTRUCTIONInner conductor Insulation Drain Wire ShieldJacket
Bare Copper 022XLPETinned CopperFoil PVC Ø 2,80mm, Black
COLOURand PACKAGE
100mtReel
ColourBlack
RC72 series#12
INDUSTRY ccaabblleess
Typical Applications: Installations/videoprojector
VIDEO CONSTRUCTIONInner conductor
Insulation
Shield
Colour Jacket
2 Video Jacket
3 Video RGB Jacket
Tinned copper
Foam Polyethylene
Tinned Copper Braid, coverage>95%
PVC Ø=2,60 mm
PVC Ø=7,00 mm black
PVC Ø=7,40 mm black
AC CONSTRUCTIONInner conductor Insulation Jacket
Bare Copper Cross Section 1,00 mmPVC Blue/brown/yellow/greenBlack PVC Ø=6,40mm
OVERALLExternal diameter
Jacket7,40 mm x 20,80
All the PVC jacket are CEI2022 or under requirement CEI2037
COLOURand PACKAGE
100mt
Reel
Colour
Black
AC 3x1,00 2 VIDEO 3 VIDEO RGB
RGB05/AC/I
Halogen free Installation cable for industries, hotels, airports, hospitals.Application: Security network - Emergency controls - Fire allarm controls - Light controlsNormative References: BT73/23 CEE e 93/63
This cable i s for fixed installation on industries fields when the space is very important (like shipyards, airports, hotels,conference rooms).
RC72-2x4x06
REF 07
RC72-1x4x06
Drain Wire
PVC Hal-Free
All/Foil
solid copper
RC72-1x4x06 RC72-1x4x08 RC72-2x4x06CONSTRUCTIONConductorsJacketShieldingDrain wireOverallOD mmRated Temp.Nominal voltageBend radius
4 solid red copper 0,6 Coloured PEFoilTinned copperPVC Hal-Free560°300V10xOD
4xsolid red copper 0,8 Coloured PEFoilTinned copperPVC Hal-Free5,660°300V10xOD
2x4xsolid red copper 0,6 Coloured PEFoilTinned copperPVC Hal-Free8,960°300V10xOD
2XRG6 ETHERNET SECTION 6xCAT5e OVERALLVIDEO SECTIONConductorInsulation Shield
Jacket
red copper imm XLPEAlu - Foil + Tinnedbraid copperPvc
Solid red copperXLPE coloured standard CAT5eALU-FOIL+Tinned braid copper+ drain wirePVC coloured
Jacket PVC blueO.D. 22,5 mmMinimum bendradius 15xOD
p.81
Composite Multi VideoCoax RGB + AC 3x1,00 ccaabblleess RGB/AC/I series
#11
#12
REF07 ccaabbllee
www.referencelaboratory.com
W/spring metal sleeve
all the above plugs are available in mono and stereo version
W/metal sleeve
We will do custom lenghts premadecable with a minimum order
PRE MADE CABLE
REFERENCETESTED AND
by
by
by
ASSEMBLED ccaabblleessp.82
www.referencelaboratory.com
by
W/PVC sleeve*optional colours sleeve Y/R
• 100% TESTED BEFORE SHIPPING • ALL JAKS REFERENCE AND REFERENCE/AMPHENOL
(TM series) MADE WITH TIP MACHINED - SOLDER AREA IN ONE BODY
• 100% RoHS COMPLIANTS
DO YOU KNOW WHAT ssttrraappppeerr™ IS?
• It’s a strongest velcro “pre assembled” w/cables, then it remain• It’s an addition value to faster identification cable’s lenght whit color’s cable• It increasing the cable’s life time because it replace any tapes• His line has been projected to cover all cables types as: microphones,
guitar, speaker and multicore
R-206 For microphone and guitar cable max jacket overall diameter 6,50 mm
Ø 7 mm Lenght 16 cm
Blue for 4,5-5 mt cable’s lenghtBlack for 10 mt cable’s lenghtYellow for 15 mt cable’s lenghtRed for 20 mt cable’s lenght
R-CF 3/4 For multicore and speaker cable max jacket overall diameter 15,50 mm
Ø 16 mm Lenght 18 cm
R-CF 1x6 For multicore and speaker cable max jacket overall diameter 15,50 mm
Ø 16 mm Lenght 25 cm
R-CF 1x12 For multicore and speaker cable max jacket overall diameter 15,50 mm
Ø 16 mm Lenght 33 cm
R-CF 1x17 For multicore speaker cable max jacket overall diameter 15,50 mm
Ø 16 mm Lenght 43 cm
29”x1-1/2 For multicore and video speaker cables
Fluorescent Lenght 73 cm
Yellow for 15 mt cable’s lenghtRed for 20 mt cable’s lenght
Grey for 20 mt cable’s lenght
Yellow for 15 mt cable’s lenght
Yellow for 15 mt cable’s lenghtRed for 20 mt cable’s lenght
p.83
ASSEMBLED ccaabblleess
www.referencelaboratory.com
www.referencelaboratory.com
This CLASSIC series are manufactured with RIC01 cable and gold metal jacks. Available in different lengthsand jacks.Applications: Hi-end guitar and instrument cable with flat response and free noise. ideal in recording studio,home recording and live.Benefits: Robust construction - Low capacitance - Double shield (Copper + semiconductor PVC) - Hi flexibility- No memory.Reference jacks: consist in Two gold metal jacks with PVC Sleeve.
ASSEMBLED INSTRUMENTSccaabblleess
RIC01 series
p.84
ASSEMBLED EFFECT PEDALS ccaabblleess
Code RIC01-JJ-4,5 RIC01-JJ-6 RIC01-JJ-10 RIC01-JJ-15 RIC01-JJ-20metres 4,5 6 10 15 20feet 14,7 19,7 32,8 49,2 65,6
AVAILABLE LENGTH
Standard configuration. For best result we use RIC01 cables and Reference Gold finish right angle jacks.Other jacks and lenghts on request.Available length: metres 0,3 0,5
feet 1 1,6RIC01JrJr-AU -03 RIC01JrJr-AU -05
Code RIC01-JJ-AU-4,5-A RIC01-JJ-AU-6-A RIC01-JJ-AU-10-A RIC01-JJ-AU-15-A RIC01-JJ-AU-20-Ametres 4,5 6 10 15 20feet 14,7 19,7 32,8 49,2 65,6
AVAILABLE LENGTH
Amphenol jacks: consist in two TM series gold metal jacks with JAWS and black finish sleeve.
Available also with (for code follow price list): AMPHENOL Nickel jacksNEUTRIK Nickel jacks
Available also with (for code follow price list): AMPHENOL/REFERENCE Nickel jacksNEUTRIK /NEUTRIK Nickel jacksSWITCHCRAFT/SWITCHCRAFT Nickel jacks
Available also with cable: RICS01R, RICS01, RIC09T
Code RIC01-JJr-AU-4,5 RIC01-JJr-AU-6 RIC01-JJr-AU-10 RIC01-JJr-AU-15 RIC01-JJr-AU-20metres 4,5 6 10 15 20feet 14,7 19,7 32,8 49,2 65,6
AVAILABLE LENGTH
Amphenol jacks: consist in ONE TM series gold metal jacks with JAWS and nickel finish sleeve and ONEReference jack right angle gold metal nickel sleeve.
Standard configuration
Standard configuration
Standard configuration
p.85
ASSEMBLED INSTRUMENTSccaabblleess
RIC-S01 series
www.referencelaboratory.com
This SOLID series are manufactured with RIC-01 cable and gold metal jacks. Available in different lengths andjacks.Applications: Recording Studios - Home recording studios. Thanks at the SOLID technology this cable isdesigned for have uncoloured sound in studio applications as musician requested.Benefits: Robust construction- Low capacitance - Double shield (Copper + semiconductor PVC) - Hi flexibility-No memory.Reference jacks: consist in Two gold metal jacks with PVC Sleeve.
Code RICS01-JJ-4,5 RICS01-JJ-6 RICS01-JJ-10 RICS01-JJ-15 RICS01-JJ-20metres 4,5 6 10 15 20feet 14,7 19,7 32,8 49,2 65,6
AVAILABLE LENGTH
Code RICS01-JJ-AU-4,5-A RICS01-JJ-AU-6-A RICS01-JJ-AU-10-A RICS01-JJ-AU-15-A RICS01-JJ-AU-20-Ametres 4,5 6 10 15 20feet 14,7 19,7 32,8 49,2 65,6
AVAILABLE LENGTH
Amphenol jacks: consist in two TM series gold metal jacks with JAWS and black finish sleeve.
Available also with (for code follow price list): AMPHENOL Nickel jacksNEUTRIK Nickel jacks
Available also with (for code follow price list): AMPHENOL/REFERENCE Nickel jacksNEUTRIK /NEUTRIK Nickel jacksSWITCHCRAFT/SWITCHCRAFT Nickel jacks
Code RICS01-JJr-AU-4,5 RICS01-JJr-AU-6 RICS01-JJr-AU-10 RICS01-JJr-AU-15 RICS01-JJr-AU-20metres 4,5 6 10 15 20feet 14,7 19,7 32,8 49,2 65,6
AVAILABLE LENGTH
Amphenol jacks: consist in ONE TM gold metal jacks with JAWS and black finish sleeve and ONE Referencejack right angle gold metal nickel sleeve.
Standard configuration
Standard configuration
Standard configuration
ASSEMBLED INSTRUMENTSccaabblleess
RIC-01A series
www.referencelaboratory.com
p.86
ASSEMBLED INSTRUMENTSccaabblleess
RIC-01V VINTAGE series
This series are manufactured with RIC01A cable and gold metal jacks. Available in different lengths and jacks.Applications: Recording Studios - Home recording - Live. A NEWS CONCEPT of Reference Cables. RIC-01A combined lasted technology and experience to give you what you really want - They delivered definitionsound at any frequencies, it is specific for ACOUSTIC GUITAR.Benefits: Robust construction- Low capacitance - Double shield (Copper + semiconductor PVC) - Hi flexibility-No memory.
Code RIC01A-JJ-AU-4,5-A RIC01A-JJ-AU-6-A RIC01A-JJ-AU-10-A RIC01A-JJ-AU-15-A RIC01A-JJ-AU-20-Ametres 4,5 6 10 15 20feet 14,7 19,7 32,8 49,2 65,6
AVAILABLE LENGTH
Amphenol jacks: consist in two TM gold metal jacks with JAWS and Nickel finish sleeve.
Available also with (for code follow price list): AMPHENOL Black jacksNEUTRIK Nickel jacks
Amphenol jacks: consist in ONE TM gold metal jacks with JAWS and nickel finish sleeve and ONE Switchcraftjack right angle nickel.
Available also with (for code follow price list): NEUTRIK /NEUTRIK Nickel jacksSWITCHCRAFT/SWITCHCRAFT Nickel jacks
Code RIC01A-JJr-4,5 RIC01A-JJr-6 RIC01A-JJr-10 RIC01A-JJr-15 RIC01A-JJr-20metres 4,5 6 10 15 20feet 14,7 19,7 32,8 49,2 65,6
AVAILABLE LENGTH
This series are manufactured in Spiral for give at Musicians a vintage look with all Reference know how.Available in one length (approx: 80 cm close spiral - 3,5 mt all extension)
Vintage cable is available with Amphenol jacks Model TM2PBM-AU (Black finish - Gold contact with metalbackshell)
Standard configuration
Standard configuration
p.87
ASSEMBLED INSTRUMENTSccaabblleess
RIC-S01R series
www.referencelaboratory.com
This SOLID series are manufactured with RIC-S01 cable and gold metal jacks. Available in different lengths andjacks.Applications: Recording Studios - Home recording studios. RED cables uses a unique coax solid wirecopper design to deliver the lowest capacitance and very transparent tone without any tonal distortion, as a rockguitarist like have.Benefits: Robust construction- Low capacitance - Double shield (Copper + semiconductor PVC) - Hi flexibility-No memory.Reference jacks: consist in Two gold metal jacks with PVC Sleeve.
Code RICS01R-JJ-4,5 RICS01R-JJ-6 RICS01R-JJ-10 RICS01R-JJ-15 RICS01R-JJ-20metres 4,5 6 10 15 20feet 14,7 19,7 32,8 49,2 65,6
AVAILABLE LENGTH
Code RICS01R-JJ-AU-4,5-A RICS01R-JJ-AU-6-A RICS01R-JJ-AU-10-A RICS01R-JJ-AU-15-A RICS01R-JJ-AU-20-Ametres 4,5 6 10 15 20feet 14,7 19,7 32,8 49,2 65,6
AVAILABLE LENGTH
Amphenol jacks: consist in two TM series gold metal jacks with JAWS and black finish sleeve.
Available also with (for code follow price list): AMPHENOL Nickel jacksNEUTRIK Nickel jacks
Available also with (for code follow price list): AMPHENOL/REFERENCE Nickel jacksNEUTRIK /NEUTRIK Nickel jacksSWITCHCRAFT/SWITCHCRAFT Nickel jacks
Code RICS01R-JJr-4,5 RICS01R-JJr-6 RICS01R-JJr-10 RICS01R-JJr-15 RICS01R-JJr-20metres 4,5 6 10 15 20feet 14,7 19,7 32,8 49,2 65,6
AVAILABLE LENGTH
Amphenol jacks: consist in ONE TM series gold metal jacks with JAWS and black finish sleeve and ONEReference jack right angle gold metal nickel sleeve.
Standard configuration
Standard configuration
Standard configuration
ASSEMBLED INSTRUMENTSccaabblleess
p.88
This series are manufactured with RIC-09T cable and gold metal jacks. Available in different lengths and jacks.Applications: Guitars, keyboards, foot pedals and all unbalanced connections design to deliver the lowestcapacitance and very transparent tone without any tonal distortion, born for all live performance and rentalcompany use. Benefits: Robust construction - Double shield (braid Copper + semiconductor PVC) - Hi flexibility - No memory. Amphenol jacks: consist in two TM series gold metal jacks with JAWS.
Standard configuration
Available also with: (for code follow price list): AMPHENOL Nickel jacksNeutrik Nickel jacks and Reference jacks in metal + PVC backshell
www.referencelaboratory.com
Standard configuration: RPCM01 (2x3.3) RPCM03 (2x5.22)
This series are manufactured with RPCM02 /RPCM03 cable and REFERENCE metal jacks.Designed for connect any guitars or/and bass amplifiers to the rispective cabinet. Applications: Live - Studio The RPCM series speaker cable use the multistrand technology witch privileges a high number of strands ofvery thin capillary wires. This means maximum sonic transparency and power transfer over a wider frequencyrange. Assembled with: Reference jacks RPPS500.
Code RPCM01 TR/FU JJ-1 RPCM01 TR/FU J-J-1.5 RPCM01 TR/FU JJ-2 Code RPCM03 TR/FU JJ-1 RPCM03 TR/FU J-J-1.5 RPCM03 TR/FU JJ-2metres 1 1.5 2 feet 3,28 4,9 6,5
AVAILABLE LENGTH
For code and model please follow price list - others length on request. Available also with: JACK/SPEAKON
SPEAKON/SPEAKON. And with RPC09(4x2.5) for biamp cabinets.
RIC-09T series
Code RIC09TJJ-AU-4, 5-A RIC09T-JJ-AU-6-A RIC09T-JJ-AU-10-A RIC09T-JJ-AU-15-A RIC09T-JJ-AU-20-Ametres 4,5 6 10 15 20 feet 14,7 19,7 32,8 49,2 65,6
AVAILABLE LENGTH
Standard configuration
Code RIC09T-JJr-4,5 RIC09T-JJr-6 RIC09T-JJr-10 RIC09T-JJr-15 RIC09T-JJr-20metres 4,5 6 10 15 20 feet 14,7 19,7 32,8 49,2 65,6
AVAILABLE LENGTH
Amphenol jacks: consist in ONE TM series gold metal jacks with JAWS and ONE Reference jack right anglegold metal nickel sleeve
ASSEMBLED HEAD-CABINETccaabblleess
RPCM series
Available also with: (for code follow price list): NEUTRIK /NEUTRIK Nickel jacks AMPHENOL /SWITCHGRAFT Nickel jacks SWITCHCRAFT/SWITCHCRAFT Nickel jacks
www.referencelaboratory.com
p.89
RMC01 series
This series are manufactured with RMC01 cable and Amphenol connectors. Available in different lengths.Applications: Recording studio - Home recording - On stage - Rental company.Benefits: Robust construction - Low capacitance - Lap shield AWG20 - Amphenol XLR with machined male pins.
Standard configuration
Standard configuration
Standard configuration
Code RMC01-MF-5 RMC01-MF-10 RMC01-MF-15 RMC01-MF-20metres 5 10 15 20feet 16,4 32 49,2 65,6
AVAILABLE LENGTH
Available also with: NEUTRIK XLR
This series are manufactured with RMC07TW cable and Amphenol connectors. Available in different lengths.Applications: Recording studio - Home recording - On stage - Rental company.Benefits: Robust construction - Low capacitance - Lap shield AWG22 - Amphenol XLR with machined male pins.
Code RMC07TW-MF-5 RMC07TW-MF-10 RMC07TW-MF-15 RMC07TW-MF-20metres 5 10 15 20feet 16,4 32 49,2 65,6
AVAILABLE LENGTH
Available also with: NEUTRIK XLR
This series are manufactured with RMC15TP cable and Amphenol connectors. Available in different lengths.Applications: Recording studio - Home recording studios - On stage - Rental company.Benefits: Robust construction - Low capacitance - Braid shield AWG26- Short twist pitch - Amphenol XLRwith machined male pins - Hi flexibility - No memory - Overall cable diameter 4.6 mm.
Code RMC15TP-MF-5 RMC15TP-MF-10 RMC15TP-MF-15 RMC15TP-MF-20metres 5 10 15 20feet 16,4 32 49,2 65,6
AVAILABLE LENGTH
Available also with: NEUTRIK XLR
ASSEMBLED MICROPHONEccaabblleess
RMC07TW seriesASSEMBLED MICROPHONEccaabblleess
RMC15TP seriesASSEMBLED MICROPHONEccaabblleess
www.referencelaboratory.com
ASSEMBLED MICROPHONEccaabblleess
RMC16TP series
p.90
ASSEMBLED MICROPHONEccaabblleess
RMCS01 series
Standard configuration. Others configuration on request. This series are manufactured with RMCS01 cableand Amphenol connectors. Available in different lengths.Applications: Recording studio - Home recording.Benefits: Thanks to Solid technology this cable is intended for studio application - Amphenol XLR withmachined male pins - Hi flexibility - No memory - Overall cable diameter 7.0 mm.
ASSEMBLED MICROPHONEccaabblleess
RMCL series
Standard configuration. Others configuration on request. This series are manufactured with RMLC SERIES cableand Amphenol connectors. Available in different lengths. The RMCL series consist: RMLC02 - RMLC03 - RMLC05Applications: On stage - Rental company - BandBenefits: Robust construction- Low capacitance - AWG22 - Amphenol XLR with machined male pins - Hiflexibility - No memory - Overall cable diameter 6.0 mm.
Standard configuration. Others configuration on request. This series are manufactured with RMC16TPcable and Amphenol connectors. Available in different lengths.Applications: Recording studio - Home recording - On stage - Rental company.Benefits: Robust construction - Low capacitance - H density braid shield AWG24 - Short twist pitch -Amphenol XLR with machined male pins - Hi flexibility - No memory - Overall cable diameter 6.0 mm.
Code RMC16TP-MF-5 RMC16TP-MF-10 RMC16TP-MF-15 RMC16TP-MF-20metres 5 10 15 20feet 16,4 32 49,2 65,6
AVAILABLE LENGTH
Available also with: NEUTRIK XLR
Code RMCS01-MF-5 RMCS01-MF-10 RMCS01-MF-15 RMCS01-MF-20metres 5 10 15 20feet 16,4 32 49,2 65,6
AVAILABLE LENGTH
Available also with: NEUTRIK XLR
Code RMLCXX-MF-5 RMLCXX-MF-10 RMLCXP-MF-15 RMLCXX-MF-20metres 5 10 15 20feet 16,4 32 49,2 65,6
AVAILABLE LENGTH
Available also with: NEUTRIK XLR
Standard configuration
Standard configuration
Standard configuration
www.referencelaboratory.com
Available also with: XLR 3 PIN
Standard configuration. Others configuration on request. This series are manufactured with DMX03cable and Amphenol connectors 5 PIN . Available in different lengths. Applications: data transmission DMX protocol. Benefits: Robust construction - Low capacitance - H density braid shield + foil - AWG22 - Amphenol XLR withmachined male pins - Hi flexibility
Code RDMX03-MF-5 RDMX03-MF-10 RDMX03 -MF-15 RDMX03-MF-20metres 5 10 15 20feet 16,4 32 49,2 65,6
AVAILABLE LENGHT
Available also with: XLR 3 PIN
p.91
RDMX01 SF series
Code RDMX01SF-MF-5 RDMX01SF-MF-10 RDMX01SF-MF-15 RDMX01SF-MF-20metres 5 10 15 20feet 16,4 32 49,2 65,6
AVAILABLE LENGHT
Standard configuration. Others configuration on request. This series are manufactured with DMX01SFcable and Amphenol connectors 5PIN. Available in different lengths. Applications: data transmission DMX protocol. Benefits: Robust construction - Low capacitance - H density braid shield - AWG 24 - Amphenol XLR withmachined male pins - Hi flexibility.
ASSEMBLED DMX ccaabblleess
RDMX03 seriesASSEMBLED DMX ccaabblleess
Code RPLC01 -MF-5 RPLC01-MF-10 RPLC01-MF-15 RPLC01 -MF-20metres 5 10 15 20feet 16,4 32 49,2 65,6
AVAILABLE LENGHT
Available also with: XLR 3 PIN
RPLC01 seriesASSEMBLED DMX&HYBRIDccaabblleessStandard configuration. Others configuration on request.This series are manufactured with RPLC01 SERIES cable withAmphenol connectors.5PIN - Powercom and Schuko Benefits: Robust construction - Power 3x 1.5mm- Data AWG22-Amphenol XLR with machined male pins - Hi flexibility
Standard configuration
Standard configuration
Standard configuration
Code SP8/SP4 SP8/SP4 SP8/SP4 SP8/SP4 SP8/SP4metres 1 3 5 10 15feet 3,28 9,8 16,4 32,8 49,2
AVAILABLE LENGTH
For code and model please follow price list - others length on request.
Code SP7 SP7 SP7 SP7 SP7metres 1 3 5 10 15feet 3,28 9,8 16,4 32,8 49,2
AVAILABLE LENGTH
For code and model please follow price list - others lengtht on request.
We use hi flexibile speaker cable with hi winding proprieties and hi bending cycle.
SPEAKON/SPEAKON - Standard configuration: SP8=RPC21 (8X2.5) and NL8/NL8.SP4= RPC09 (4X2.5) and NL4/NL4.
SPEAKON/JACK - Standard configuration: RPC02 (2x2.5) and NL2/Speaker Jack RPP-S500
Code SP6 SP6 SP6 SP6 SP6metres 1 3 5 10 15feet 3,28 9,8 16,4 32,8 49,2
AVAILABLE LENGTH
For code and model please follow price list - others length on request.
JACK/JACK - Standard configuration: RPC 02 (2x2.5) and 2x Speaker jack RPP-S500
Code RPCM01-TR/FU-JJ-3 RPCM01-TR/FU-JJ- 5 RPCM01-TR/FU-JJ-10 metres 3 5 10feet 9,8 16,4 32,8
AVAILABLE LENGTH
For code and model please follow price list - others length on request.
We use RPCM cable for have hi flexible speaker cable with hi winding proprieties and hi bending cycle.Standard configuration. RPCM01 (2x3.3) + 2 x Speaker Jack RPP-S500
Code RPCM01 TR/FU J-SP-3 RPCM01 TR/FU J-SP-5 RPCM01 TR/FU J-SP-10 metres 1 5 10feet 9,8 16,4 32,8
AVAILABLE LENGTH
For code and model please follow price list - others length on request.Available also SPEAKON/SPEAKON.
We use RPCM cable for have hi flexibile speaker cable with hi winding proprieties and hi bending cycle.Standard configuration. RPCM01 (2x3.3) + 1 NL2 + 1 x Speaker Jack RPP-S500
ASSEMBLED SPEAKER ccaabblleessSP series
p.92
www.referencelaboratory.com
Recommendedby DV2 for
Line array
p.93
ASSEMBLED SPEAKER ccaabblleessfor line array systems
Extremely flexible ideal for line array system - This speaker cables have hi strandcopper for minimum power loss and maximum flexibility. This is also noticeable inlonger cable lengths, the result is more powerful on low frequency and clear highrange.
SOCA/SOCAThis series are available in different length use cable RPC32 (16x4mmq) and Reference 19 pin multipinconnectors socapex compatible. Thanks at this cable, an unique cable is able drawing 8 or 16 speakers (likeAdamson, JBL or V-Dosc/dV-Dosc) standard 10 - 15 and 25 metres. (different length on request)
SPIN SOCA M Spin soca M is the terminal at speakers Assembled with 19 male pin Reference - Neutrik speakon NL8 andRPC48 (8x4mmq)
SPIN SOCA F Spin soca F is Conjuntion rack/ SOCA panel Assembled with 19 female pin Reference - Neutrik speakon NL8and RPC48 (8x4mmq).
LINKThe link cable is for link two speaker together, use speaker cable model RPC31 (8x2.5mmq) and 2 NL8speakon. Two length 0.80 cm and 1.20 cm as standard, on request any length.
www.referencelaboratory.com
www.referencelaboratory.com
ASSEMBLED MULTISTRAND SPEAKER ccaabblleessfor line array systems
p.94
Extremely flexible ideal for line array system - This speaker cables have hi strandcopper for minimum power loss and maximum flexibility. This is also noticeable inlonger cable lengths, the result is more powerful on low frequency and clear highrange.
SOCA/SOCAThis series are available in different length use cable RPC33 (16x4mmq) and Reference 19 pin multipinconnectors socapex compatible. Thanks at this cable, an unique cable is able drawing 8 or 16 speakers (likeAdamson, JBL or V-Dosc/dV-Dosc)) standard 10 - 15 and 25 metres. (different length on request)
SPIN SOCA M Spin soca M is the terminal at speakers Assembled with 19 male pin Reference - Neutrik speakon NL8 andRPC47 (8x4mmq)
SPIN SOCA F Spin soca F is Conjuntion rack/ SOCA panel Assembled with 19 female pin Reference - Neutrik speakon NL8and RPC48 (8x4mmq).
LINKThe link cable is for link two speaker together, use speaker cable model RPC21 (8x2.5mmq) and 2 NL8speakon. Two length 0.80 cm and 1.20 cm as standard, on request any length.
Recommendedby DV2 for
Line array
A variety range of cable for all active speaker.
XLR F/ Schuko P- XLR M/Powercon. Mains 2.5mmq - cable mod. RPLC06 NPI Available also no NPI version (RPLC10)Other configuration on request.
Code RPLC06 MF-S/NAC3 -5 RPLC06 MF-S/NAC3 -10 RPLC06 MF-S/NAC3 -15 RPLC06 MF-S/NAC3 -20metres 5 10 15 20feet 16,4 32 49 65,6
AVAILABLE LENGHT
XLR F/CEI 309 P-XLRM/ CEI309 Mains 2.5mmq - cable mod. RPLC11 NPI Other configuration on request.
Code RPLC11 MF-309MF -5 RPLC11 MF-309MF -10 RPLC11 MF-309 MF -15 RPLC11 MF-309MF -20metres 5 10 15 20feet 16,4 32 49 65,6
AVAILABLE LENGHT
XLR F/ Schuko - XLRM/ Powercon Mains 1.5mmq - cable mod. RPLC01 NPIAvailable also no NPI versionOther configuration on request.
Code RPLC01 MF-S/NAC3 -5 RPLC01 MF-S/NAC3 -10 RPLC01 MF-S/NAC3 -15 RPLC01 MF-S/NAC3 -20metres 5 10 15 20feet 16,4 32 49 65,6
AVAILABLE LENGHT
p.95
ASSEMBLED SPEAKER ccaabblleessfor active loudspeaker
CABLE DRUMS
RDQC series EP
Berklee Clinic at Arena Sferisterio (MC) 1995
CABLE DRUMReference Drum Quick Care Serie
p.98
www.referencelaboratory.com
RDQC04 RDQC05 RDQC06
The Reference Cable Drum is a “new line” and it consist of two series:a) “Standard” with three models as RDC-01s, RDC-01, RDC-01XL b) “Quick Care” with three models as RDQC-04, RDQC-05, RDQC-06Both series have the same structure with strong steel frame, black finish, both series use the same type of Drum.The Reference “Quick Care” drum is unique on the studio market, range and category because its concept:1) Is to carry easier and secure just by one people trought a combined system by reels and retractile handTM2) To become a stage box (See boxes accessories).The Reference “Quick Care” drum and standard Cable drum are designed to support the following qty of cable,considering each models:
Dim.: L= 18cmW= 33cmH= 34cmWeight= 5.5Kg
Dim.: L= 22cmW= 33cmH= 34cmWeight= 6Kg
Dim.:L= 40cmW= 33cmH= 34cmWeight= 8Kg
Dim.: L= 36cmW= 63cmH= 54cmWeight= 22Kg
Dim.: L= 52cmW= 63cmH= 54cmWeight=22,5Kg
Dim.:L= 71cmW= 63cmH= 54cmWeight= 23,5Kg
RDC01 S 290 80 80 75 74 41 24 16 16 16RDC01 290 80 120 116 115 67 37 23 23 23RDC01 XL 290 80 310 302 299 177 100 66 63 35 25 25 16 64RDCQC04 450 190 150 308 326 193 93 64 56 29 24 21 16 56RDCQC05 450 190 300 616 699 399 195 135 112 64 53 46 34 112RDCQC06 450 200 500 665 331 228 193 114 86 81 58 193
CABLE CAPACITY
modelsinternal dimension
out diam core diam width
RMC01 RPC13 RSC04 RSC08 RSC12 RSC16 RSC25 RSC33 RSC40 RSC48 RCC01
ø 6,9 ø 7,0 ø 9,0 ø 12,60 ø 15,50 ø 15,80 ø 21,50 ø 23,00 ø 25,20 ø 28,00 ø 16,00
RDC01 S RDC01 RDC01 XL
p.99
BOX FOR CABLE DRUM
www.referencelaboratory.com
Step by step... Reference Quick Care Drum...
gets dressed and becomes a“Stage Box”!!
Program Box and Pannel for RDC series
❶
❷ ❸ ❹ ❺
❻
❼
❶
❷ ❸ ❹ ❺ ❻ ❼ ❽
❶ REB-15164❷ REP-JACK2❸ REP-XLRF❹ REP-JACK❺ REP-O❻ REP-XLR3❼ REP-XLR
❶ REB-26319❷ REP-O-BL2664❸ REP XLR 1/8❹ REP XLR 9/16❺ REP XLR 17/24❻ REP XLR 24/32❼ REP Stage Box❽ REP SubM/SM
Round blind pannelRound pannel with 5 xlr holesRound pannel with multipin hole
RDC01-12M/4F-RSC16-20MTcomplet set: 12 IN/4 OUT + 20 mt RSC 16
Program Box and Pannel for RDQC series
RSC/D01
Ch. 33 - 40 48
40
* * *
*
**
Wiring Set upusing the Cable Drum “Quick Care” series
Stage/Monitor/House signal distribution system components:
N° 1 Main stage box with cable drum; connections panel and 50 meters of 48 channels multicore
mod. RDQC 06 w/REPXLR
N° 5 Secondary stage boxes with cable DrumRDC-01 w/REPXLR; connections panel and 20 meters of 8 channels multicore mod. RSC series
N° 1 40 channels snake RSC series for monitor mixer connection
N° 1 40 In/8 Out snake RSC series for FOH mixer connection
910
11
9
10
11
www.referencelaboratory.com
CABLE + CABLE DRUM = CUSTOM SOLUTIONp.100
REFERENCE CABLE + REFERENCE CABLE DRUM= CUSTOM SOLUTIONThis section intend give you an idea of our custom production.Any solution is customized on request – for details please your local Reference Laboratory agent or distributor.
ROBC 01 polyurethaneModel: ROBC01 (1 Video BNC + 1 Intercom XLR + 2 Audio Pin RCA)Application: Audio- Video recording from camera to OBVan
Model: RGB05/AC (5 Video + AC Power)Application: VIDEO Projector supply - all in onecable!
Model: RCBM01 (2 Video BNC +1 Audio XLR +Power)Application: Video application for live eventsrecording / playback in conference rooms
Model: RFBC01 (2 Video BNC +2 Audio XLR + IIntercom XLR + Power)Application: Fisher boom
www.referencelaboratory.com
p.101
CUSTOM SOLUTION
Model: RSC4 (4 pair balanced audio cable)Application: Master out; delay line; service's lines
Model: RCOM01 (4 wire Intercom extensioncable)Application: Intercom 2 ch with thru box forextension length - Multi split intercom
Model RVC59D (2 video RG59 + 2 BalancedaudioApplication: Digital console transmission; Video+ audio; Video + intercom; composite video +balanced audio as service's lines
Model: LIGHTNex (RCL-M20-SF 7X4MMQ)Application: Light power supply; dischangelighting power supplies
Model: 12CHs + 4 ReturnApplication: Stage distribution with return ch's - for small bands
www.referencelaboratory.com
CUSTOM SOLUTIONp.102
Model: 48CHs + 8 Return (1 RDQC06 + 5 RDC 01 for stage distribution + monitor and master fan out)Application: Stage distribution with passive monitor splitter
Model: 24CHs + 8 Return Application: Stage distribution with return ch's -for small bands / rental companies
Some example of audio distribution
www.referencelaboratory.com
p.103
REFERENCE EMPTY BOXES AND PANELS
An example of floor box assembledwith 8 XLR F/4XLR MALE plus multipin.
RESB01S Floor box 1/2 U
RESB 1/2 S Floor box 1/4 U
RESB02 Floor box 2U
RESB01 Floor box 1U
RMP-2 Panels 2 U Blind
RMP-1 Panel 1 U Blind
RPD16 Panel 1 U with 16 holes for XLR
RPD8 Panel 1 U with 8 holes for XLR
RPD12 Panel 1 U with 12 holes for XLR
RMP 85-150 Panel 2 U with 2 holesfor multipin 85-150
RMP 37-54 Panel 2 U with 4 holesfor multipin 37-54
RMP 19-25 Panel 2 U with 6 holesfor multipin 19-25
Panel for Adamson Y - Axys series
ACCESSORIES FOR CABLE DRUMSp.104
A definitive soft (strongest) bag to reduce mechanical inconvenient on live application’s fan out and cable thanksat our soft covers and cable drums.
FAN OUT UP TO: 6 XLR 16 XLR 33 XLR 48 XLR
RSBS 6 RSBS16 RSBS33 RSBS48
www.referencelaboratory.com
A dedicated soft cover with identified window for better management and to protect cable, connectors and cable identification.
COVER FOR CABLE DRUM
A dedicated soft cover with identified window for better management and to protect cable, connectors and drum.
For RDQC 04 model RSC/QD04 For RDQC 05 model RSC/QD05 For RDQC 06 model RSC/QD06
For RDC series
RSC/D01-S RSC/D01 RSC/D01-XL
For RDQC series
Why choose Microsonic Music?At Microsonic Music we have over half a century’s experience in the design and production of products for the human ear. Thecompany is widely recognized as one of the world’s leading full service earmold laboratories. Why chose Microsonic’s monitors?There are several benefits to Microsonic’s monitors for both musicians and personal listeners.For the musician, you have the freedom to move around. Your monitors will go wherever you go, allowing you to add passionto your performance. Therefore, when used correctly, Microsonic’s monitors are better for your ears and for your long termcareer as a musician. Personal listeners can also benefit from the sound isolation provided by Microsonic’s monitors. Thereduction of ambient sounds means you will also be able to reduce the volume level in your ear, protecting your hearing.
The EPIC™ SeriesOur universal monitors, the EPIC™ Series, offers the closest experience to a custom made monitor. Using our patent-pendingswivel nozzle in conjunction with an extremely comfortable flanged ear tip positioned deep in the ear canal, it offers a fit like noother in the industry.
EPIC™ Universal JCDesigned to provide superb fidelity for listening environmentswhere transparency is the utmost priorityFrequency Response: 20Hz - 16kHzImpedance: 10 ohms at 1kHzSensitivity: 104 dB at 1kHz
EPIC™ Universal XDesigned to provide enhanced bass to maximize the total sound experienceRap artists, bass players, drummers, DJs, electric guitarists, personal listenersFrequency Response: 20Hz - 16kHzImpedance: 16 ohms at 500HzSensitivity: 118 dB at 1kHz
LARGEsupport up to 20 cable reels and 8 sticks for displayed assembled cables.
SMALLsupport up to 12 cable reels and 5 sticks for displayed assembled cables.
PENGUIN
Width (cm) Depth center (cm) Height (cm) Weight (kg/lbs) Sticks*LARGE 100 44 196 67/30,5 8 pcsSMALL 65,5 44 196 50/22,8 5 pcsPENGUIN 58 65 176 37/15 5 pcs
p.105
DISPLAY STAND ““FFaaii ddaa ttee”” and PENGUIN STAND
www.referencelaboratory.com
Universal monitorEPIC seriesMICROSONIC MUSIC
REFERENCE DDii--BBooxxR.DI.B series
p.106
www.referencelaboratory.com
RDI B 01
Frequency Frequency response dB THD @ Uin = 20 dBV@ RL = 10 K Ω, Uin = 0dBV
20 Hz -0,32 0,69 %50 Hz -0,13 0,20 %100 Hz -0,05 0,08 %400 Hz -0,01 0,02 %1 kHz 0 <0,01 %5 kHz 0,02 <0,01 %10 kHz 0,08 <0,01 %15 kHz 0,16 <0,01 %20 kHz 0,29 <0,01 %30 kHz 0,64 <0,01 %50 kHz 1,58 <0,01 %100 kHz -8,03 0,015 %upper frequency limit (-3 dB): 92 kHz
Passive DI BOX 10:1 Frequency Response 30-50.000 Hz.Input Impedance 10k ohm. Attenuator 2 positions PhoneInput, XLR OUTPUT
<
Fully Galvanical Isolated Passive DI Box 2 CH , RATIO10:1 -
Frequency Response : 20 -50.000Hz. Input: two input at 10KOhm for each channels
(phone RCA and Jack) with Pad. switch. (0-20dB) Output : XLR
<
RDI B 02
REFERENCE/FAT PRO DDii--BBooxxACTIVE D.I series
Reference FAT PRO is a new line of active DI Boxes and Phantom Power Supply. All products are manufactured inUSA, and our goal is the development and manufacturing of high quality audio products. We use only 1% metal filmresistors, only the finest high-tolerance capacitors, and gold-plated connectors. We design products thet you need,always of the highest quality, at affordable prices and give you the best possible service.
RFADB - 1 SINGLE CHANNEL ACTIVE DIRECT BOX
The only direct box made that operates on 9v battery, 48 v phantom power, and ower, andVAC. AVA I L A B L E A L S O I NS T E R E O CHANNEL mod. RFADB-2
RFADB-1
Frequency Response +0/-.02 dBv 20Hz-20kHz Bandwidth +0/-.3 dBv 2Hz-200kHz Noise 20Hz/20KHz -116 dBv Distortion 20Hz-20kHz 0.005% Maximum Input Instrument 2.3V RMS/ +7.2 dBv Maximum Input Line 12V RMS/ +21.6 dBv Maximum Input Speaker 120V RMS/ +41.6 dBvGain Instrument -15 dBv Gain Line -30 dBv Gain Speaker -50 dBv Input Impedence Instrument 2 MEG ohms Input Impedence Line / Speaker 22.000 ohmsInput Connectors 1/4" Phone Jack Output Load Bal. - P2 to P3 = 600 ohms Unbal. - P2 or P3 to P1 = 300 ohms
Output Connector 3 Pin XLR Output phase Pin. 2 Pos./Pin 3 Neg./Pin 1 Gnd.Channels OneHeight 1.73’’ cm 4,4Width 5.1’’ cm 13Depth 3.4’’ cm 8,5Weight 1 LbPower Requirements 9V Battery 5 ma/200 hrs.typ. 48V Phantom 5 ma/240 mW AC Power 0,7 ma/186 mW
v
F A D B - 1 S P E C I F I C A T I O N S
R F A D B - 4 S P E C I F I C A T I O N SFrequency Response +0/-.01 dBv 20Hz-20kHz Bandwidth +0/-.3 dBv 2Hz-200kHz Noise MIC OUT -118 dBv Noise +4dBv OUT -108 dBv Distortion 20Hz-20kHz 0.0025% Crosstalk 20Hz-20kHz -110 dBv Maximum Input (Instrument) 6.635V +12 dBv Maximum Input (Line) 16V RMS/+24dBv
Maximum Input (Speaker) 130.00V/+42 dBv
Gain [MAX.] (Instrument) 52.83 dBv
Gain [MAX.] (Line) 20.00 dBv
Gain [MAX.] (Speaker) 1.72 dBv
Input Impedence (Instrument) 2 MEG ohm
Input Impedence (Line / Speaker) 27.09k / 22.599k
Input Connectors Gold Plated 1/4" Phone Jack Output Load +4 dBv output P2-P3 = 10k ohms, + Impedance pin 2 [-30 dBv output P2 to P3 = Output Connector Gold Plated 3 Pin XLR
p.107
ACTIVE D.I seriesREFERENCE/FAT PRO DDii--BBooxx
www.referencelaboratory.com
• On / Off Power Switch• Power On led Indicator• Low Battery led Indicator• Long Battery Life, typical battery life of 200 hrs.• Indestructible packaging• Removable Belt Clip• All Markings On Top of Unit• Dimentions (cm.): HWH 4,4x13x8,5• Homegrown in California, USA
R F A D B - 4F O U R C H A N N E L I N S T R U M E N T / L I N E P R E A M P / A C T I V E D I R E C T
R F B P S - 1B A T T E R Y P O W E R E D4 8 V P H A N T O M P O W E R S U P P L Y
R F P M - 1AC P O W E R E D4 8 V P H A N T O M P O W E R S U P P L Y
RFDB-4
RFBPS-1
REFERENCE/FAT PRO Phantom Power Supply
AVAILABLE ALSO IN STEREO VERSION MOD. RFBPS-2
RFPM-1: Single channel AC-powered, 48-volt phantom power supply. Will operate with any microphone requiring from 12 volts to 48 volts up to 10 ma. Very low noise and distortion. Available also in stereo version mod. RFPM-2 end Fourchannel mod. RFPM-4
The RFPADB-4 is a high-quality, combination 4-channel instrument/line preamp and active direct box offering low distortionand extremely high signal to noise. Each channel has a 3-position input switch for instrument, line, and speaker level inputs.This along with the input gain control and clip LED guarantee ultimate flexibility and maximum signal to noise. In speakerposition, the maximum signal is 4000 W. Housed in an indestructible metal chassis using only the finest audiophile-qualitycomponents. For any situation requiring multi-channel active DIs, the FPADB-4 is always the right choice for the job.
MULTIPIN CONNECTORSby Amphenol
p.108
www.referencelaboratory.com
MP-41 series
13, 19, 25, 37 and 54 contact type
85, 150 and 200 contact type
13, 19, 25, 37 and 54 contact type
85, 150 and 200 contact type
Amphenol’s MP-41 series of multipin connectors utilise the samedesign principals of the rugged Mil-C-5015 military connectors. Theycan withstand high shock and vibration environments and are ideal fortough on-road applications. Featuring a quick mating bayonet couplingwith an audible full mating feature ensures a positive connection everytime. Available from 13 to 150 pins with gold plated “combo”*contacts supplied with each connector as standard.Features:• 13 to 150 pins (4 to 48 channel) • 2000 mating cycles• Gold plated “combo”* contacts • Black finish• Synthetic insert • Positive bayonet locking• Protective dust caps • PG cable glands• Industry standard compatible • IP67 rated
ALL CONNECTORS ARE Veam and LK compatible.
40.5 160(1.60) (6.30) 11 13 MP-4106-13S44 171(1.73) (6.73) 13.5 19 MP-4106-19S46.6 193(1.83) (7.60) 16 25 MP-4106-25S54.3 210(2.14) (8.26) 21 37 MP-4106-37S60.1 210(2.36) (8.26) 21 54 MP-4106-54S73.3 137(2.88) (5.40) 29 85 MP-4106-85S73.3 145(2.88) (5.70) 36 150 MP-4106-150S37.8 160(1.49) (6.30) 11 13 MP-4101-13P41.1 171(1.62) (6.73) 13.5 19 MP-4101-19P41.5 193(1.63) (7.60) 16 25 MP-4101-25P51 210(2.00) (8.26) 21 37 MP-4101-37P57.1 210(2.25) (8.26) 21 54 MP-4101-54P70 137(2.75) (5.40) 29 85 MP-4101-85P70 145(2.75) (5.70) 36 150 MP-4101-150P
PRODUCT DIMENSIONS IN MM (INCHES) DIMENSIONS IN MM (INCHES)PINS CODE
FIGURE DRAWING A B PG
Straight cable plug with socketcontacts,Black finish, suppliedcomplete with gold plated solder /crimp “combo”* contacts.
Cable connecting receptacle withpin contacts, black finish, suppliedcomplete with gold plated solder /crimp “combo”* contacts.
*“Combo” contacts not available to suit 150 pin connectors, supplier with crimp type only.
p.109
MULTIPIN CONNECTORSby Amphenol
www.referencelaboratory.com
38 29.4 3.2 40.5 38.8(1.49) (1.15) (0.13) (1.60) (1.53) N/A 13 MP-4164-13S41 31.8 3.2 44 38.8(1.61) (1.25) (0.13) (1.73) (1.53) N/A 19 MP-4164-19S44.5 34.9 3.73 48.51 40.6(1.75) (1.37) (0.14) (1.91) (1.60) N/A 25 MP-4164-25S50.8 39.7 3.73 54.3 42(1.99) (1.56) (0.14) (2.14) (1.65) N/A 37 MP-4164-37S57 44.5 4.39 60.8 45(2.24) (1.75) (0.17) (2.40) (1.77) N/A 54 MP-4164-54S69.8 55.5 4.39 73.3 45(2.74) (2.18) (0.17) (2.88) (1.77) N/A 85 MP-4164-85S69.8 55.5 4.39 73.3 45(2.74) (2.18) (0.17) (2.88) (1.77) N/A 150 MP-4164-150S38 29.4 3.23 34.2 34.5 29(1.49) (1.15) (0.13) (1.34) (1.35) (1.14) 13 MP-4102-13P41 31.8 3.23 37.4 34.5 32.2(1.61) (1.25) (0.13) (1.47) (1.35) (1.26) 19 MP-4102-19P44.5 34.9 3.73 40.9 35.7 35.3(1.75) (1.37) (0.14) (1.61) (1.40) (1.38) 25 MP-4102-25P50.8 39.7 3.73 46.7 36.5 41.4(1.99) (1.56) (0.14) (1.83) (1.44) (1.62) 37 MP-4102-37P57 44.5 4.30 53.4 38.5 47.8(2.24) (1.75) (0.17) (2.10) (1.52) (1.88) 54 MP-4102-54P69.8 55.5 4.30 65.5 38.5 59(2.74) (2.18) (0.17) (2.57) (1.52) (2.32) 85 MP-4102-85P69.8 55.5 4.30 65.5 38.5 59(2.74) (2.18) (0.17) (2.57) (1.52) (2.32) 150 MP-4102-150P34.16 31.5 127 4.7(1.35) (1.24) (4.99) (0.18) - - 13 MP-25042-1337.36 31.5 127 4.7(1.47) (1.24) (4.99) (0.18) - - 19 MP-25042-1940.87 31.5 127 4.7(1.61) (1.24) (4.99) (0.18) - - 25 MP-25042-2546.68 31.5 197 4.7(1.84) (1.24) (7.75) (0.18) - - 37 MP-25042-3753.36 31.5 197 5.5(2.10) (1.24) (7.75) (0.22) - - 54 MP-25042-5465.48 31.5 197 5.5(2.58) (1.24) (7.75) (0.22) - - 85 MP-25042-8565.48 31.5 197 5.5(2.58) (1.24) (7.75) (0.22) - - 150 MP-25042-8538.8 20.7 127 4.7(1.53) (0.81) (4.99) (0.18) - - 13 MP-25043-1341.6 20.7 127 4.7(1.64) (0.81) (4.99) (0.18) - - 19 MP-25043-1945.3 20.7 140 4.7(1.78) (0.81) (5.51) (0.18) - - 25 MP-25043-2552.15 20.7 197 5.5(2.05) (0.81) (7.75) (0.21) - - 37 MP-25043-3758.6 20.7 197 5.5(2.30) (0.81) (7.75) (0.21) - - 54 MP-25043-5470.7 20.7 197 5.5(2.78) (0.81) (7.75) (0.21) - - 85 MP-25043-8570.7 20.7 197 5.5(2.78) (0.81) (7.75) (0.21) - - 150 MP-25043-85
PRODUCT DIMENSIONS IN MM (INCHES) DIMENSIONS IN MM (INCHES)PINS CODE
FIGURE DRAWING A B C D E F
Panel plug with socketcontacts, black finish,supplied complete with goldplated solder / crimp“combo”* contacts.
Panel receptacle with pincontacts, black finish,supplied complete with goldplated solder / crimp“combo”* contacts.
Plug protective dustcap tosuit MP-4106 and MP-4164types.
Receptacle protectivedustcap to suit MP-4101 andMP-4102 types.
*“Combo” contacts not available to suit 150 pin connectors, supplier with crimp type only
MP-41 series
www.referencelaboratory.com
SPEAKER / LIGHT CONNECTORSp.110
With a philosophy dedicated to customer sadisfaction, our light/speaker connectors are manufacturated to the higheststandard of quality.Thanks to a “live concert experience” we are able to meet the requiriments of wold wide audio/light market.Typical Applications: Line array amprack to speaker connection - Lights cabling
For different specification and type on request
SPECIFICATIONSShell Aluminium alloyPlating Electroless nichel/anti-corrosion, conductive or no Conductive /blackContacts Copper alloy +Gold on nickelWater proof IP67Contact Solder (male diameter 3)Working current (A) 25Max wire section 4 (mmq)Contact resistance <1mOhm
www.referencelaboratory.com
p.111
AUDIO CONNECTORS-XLR & ADAPTORby Amphenol
Features:• Zinc Diecast Shell. • Solder Bucket connections. • "Jaws" Cable Retention System. • Contact layouts in 3,4, 5, 6 and 7.• Precision machined male contact • Leading first mate last break socket contact • Quick and easy assemblywithout screws – by hand Options: Stamped Contacts (3 contact only), Gold plated contacts, Large or Small Jaws Cable Clamp, Black Finish Shell, Bulk Pack, Coloured Boots / Backshells Available contact: 3 - 4 - 5 - 6 - 7
Adaptor:• Amphenol have developed a range of accessories to complement the AC series of connectors including:XLR 3 pin MALE/MALE - XLR 3 pin FEMALE/FEMALE and new range of DMX Adaptors and terminators
CODE: AC3MM - RL CODE: AC3MMB - RL
CODE: AC3F-RL CODE: AC3FB-RL
CODE: AC3M3MW CODE: AC3F3FW
CODE: AC3F5MW 3 FEMALE TO 5 MALE CODE: AC3M5FW 3 MALE TO 5 FEMALE
CODE: AC5M5FBW 5 MALE TO 5 FEMALE TERMINATORCODE: AC3DMXT 3 POLE CODE: AC5DMXT 5 POLE
CHASSIS CONNECTORSby Amphenol
p.112
AC series
www.referencelaboratory.com
Features:• Zinc Diecast Shell. • D size housing can be front or rear mounted using the same panel cutout. • SolderBucket connections.• Precision machined or Stamped contacts (3 pin only). • Leading first mate last break socket contact.• Positive latch lock system.Options: Stamped contacts (3 contact only), Gold plated contacts, Black finish, Non-Latching(Femaleonly),Bulk Pack.Available contact: 3- 4- 5- 6- 7XLR 3 pole female, Nikel Finish, CODE: AC3FDZ XLR 3 pole female, Black Finish, CODE: AC3FDZ B
XLR 3 pole male, Nikel Finish, CODE: AC3MMDZXLR 3 pole male, Black Finish, CODE: AC3MMDZB
PHONE PLUGby Amphenol
AC series
Features:• Stylish design • Flexible grommet cable protection • Robust diecast shell • Gold plated contacts • Colourcoded • Good solderability• Quick and easy assembly • Panel mount utilises standard ‘D’ type housingOptions: Satin Nickel shell finish with coloured grommet, Bulk Pack.
Code: Red ACPR-RED Black ACPR-BLK Red ACJR-RED Black ACJR-BLKYellow ACPR-YEL Blue ACPR-BLU Yellow ACPR-YEL Blue ACJR-BLU Green ACPR-GRN White ACPR-WHT Green ACPR-GRN White ACJR-WHT
RCA Jack, Diecast Shell, Gold plated contacts, Nickel finish shell, coloured insulator.
Code : Red ACJD-RED Black ACJD-BLK White ACJD-WHTYellow ACJD-YEL Blue ACJD-BLU Green ACJD-GRN
p.113
PHONE PLUGby Amphenol
TM series
www.referencelaboratory.com
Features: • Mono or Stereo (TRS). • Stylised shell design with Ergonomic grip. • Robust diecast shell in Satinnickel or Black finish.• Nickel or Gold contact plating. • Keyed shell. • Optional heavy duty metal backshell / boot. • Greatsolderability.• Increased solder area on ground contact. • "Jaws" Cable Clamp. • Precision machined contacts. • Quick andeasy assembly.Options: Gold Contacts, Large or Small Jaws Cable Clamp for cable diameter >6mm, Black Shell, MetalBackshell / Boot, Bulk Pack. Coloured grommets (ordered separately)
1/4" (6.35mmø) MONO Phone plug, Jaws cable clamp, Thermoplastic backshell, SATIN finish.CODE Standard TM2P-RL Gold Plated Contacts TM2P-AU-RL Large Cable Clamp TM2PJ-RL
1/4" (6.35mmø) MONO Phone plug, Jaws cable clamp, Thermoplastic backshell, BLACK finish.CODE Standard TM2PB-RL Gold Plated Contacts TM2PB-AU-RL Large Cable Clamp TM2PBJ-RL
1/4" (6.35mmø) STEREO Phone plug, Jaws cable clamp, Thermoplastic backshell, SATIN finish.CODE Standard TS3P-RL Gold Plated Contacts TS3P-AU-RL Large Cable Clamp TS3PJ-RL
1/4" (6.35mmø) STEREO Phone plug, Jaws cable clamp, Thermoplastic backshell, BLACK finish.CODE Standard TS3PB-RL Gold Plated Contacts TS3PB-AU-RL Large Cable Clamp TS3PBJ-RL
PHONE PLUGby Amphenol
p.114
M series
Features:• Mono or Stereo (TRS). • Stylish shell design. • Robust diecast shell in Satin nickel or Black finish. • Nickelor Gold contact plating.• Flexible grommet cable protection. • Improved solderability. • Precision machined contacts. • Standard orBulk packaging.Options: Black Shell, Gold contacts.Coloured grommets (ordered separately)
1/4" (6.35mmø) Mono Phone plug, Diecast Shell, SATIN finish,Flexible grommet.CODE Standard ACPM-GN-RL Gold Plated Contacts ACPM-GN-AU-RL
1/4" (6.35mmø) Mono Phone plug, Diecast Shell, BLACK finish,Flexible grommet.CODE Standard ACPM-GB-RL Gold Plated Contacts ACPM-GB-AU-RL
1/4" (6.35mmø) Stereo Phone plug, Diecast Shell, SATIN finish,Flexible grommet.CODE Standard ACPS-GN-RL Gold Plated Contacts ACPS-GN-AU-RL
1/4" (6.35mmø) Stereo Phone plug, Diecast Shell, BLACK finish,Flexible grommet.CODE Standard ACPS-GB-RL Gold Plated Contacts ACPS-GB-AU-RL
1/4" (6.35mmø) Mono Phone plug, Right angle Diecast Shell, SATIN finish,Flexible grommet.CODE Standard ACPM-RN-RL Gold Plated Contacts ACPM-RN-AU-RLAvailable also in stereo version
1/4" (6.35mmø) Mono Phone plug, Right angle Diecast Shell, BLACK finish,Flexible grommet.CODE Standard ACPM-RB-RL Gold Plated Contacts ACPM-RB-AU-RLAvailable also in stereo version
www.referencelaboratory.com
p.115
REFERENCE PHONE PLUG
Features: • Mono or Stereo (TRS). • Robust diecast shell • Gold contact plating. • Great solderability.• Increased solder area on ground contact. • Precision machined contacts. • Tip –solder area in one piece only(no tip inserted) • Quick and easy assembly.
1/4" (6.35mmø) MONO Phone plug, Metal+PVC backshell, BLACK finish. Gold plated contactCODE RPP-PPS
1/4" (6.35mmø) MONO Phone plug, Right angle - Sleeve Nickel finish, Spring. Gold plated contactCODE RPP-SSM206
1/4" (6.35mmø) MONO Phone plug, - Sleeve Nickel finish, Spring. Gold plated contact for speaker cableCODE RPP-S500
MODEL APPLICATION BULK ASSEMBLED
RIC01 ELECTRIC GUITAR & BASS LIVE APPLICATION 30 84RICS01 ELECTRIC GUITAR & BASS STUDIO APPLICATION 31 85RICS01R ELECTRIC GUITAR ROCK PERFORMANCE 31 87RIC01A ELECTRO-ACOUSTIC GUITAR ENTHUSIAST PERFORMANCES 32 86RIC01V ELECTRIC GUITAR & BASS LIVE APPLICATION 32 86
RMC01 MICROPHONE CABLE LIVE / STUDIO APPLICATION 22 89RMC01S MIC. CABLE SOLID CONDUCTORS STUDIO APPLICATION 25 90RMC16TP MIC. CABLE SHORT PITCH LIVE APPLICATION AND
LONG LINE 25 90RMLC02/03/04 MICROPHONE CABLE LIVE ON STAGE APPLICATION 24 90
RPCM01 SPEAKER CABLE 2x3.3mmq Multistrand HEAD & CABINET 41 88RPCM03 SPEAKER CABLE 2x5.2mmq Multistrand HEAD & CABINET 39 88
RPC21 SPEAKER CABLE 8X2.5mmq Multistrand LINE ARRAY SYSTEMS 39 94RPC31 SPEAKER CABLE 8X2.5mmq LINE ARRAY SYSTEMS 36 93RPC20 SPEAKER CABLE 4X4 mmq Multistrand SUB WOOFER 39 92RPC26 SPEAKER CABLE 4X4 mmq SUB WOOFER 37 92RPC 47 SPEAKER CABLE 8x4mmq Multistrand LINE ARRAY SYSTEMS 39 94RPC 48 SPEAKER CABLE 8x4mmq LINE ARRAY SYSTEMS 38 93RPC32 SPEAKER CABLE 16x4mmq LINE ARRAY SYSTEMS 37 93
RDMX01SF DATA CABLE LIVE APPLICATION 50 91RDMX03 DATACABLE LIVE APPLICATION LONG LINES 51 91RPLC01 DATA CABLE WITH POWER LIGHT FIELD APPLICATION 46 95
RPLC01 POWER (3X1.5) + 1AUDIO FOR ACTIVE LOUDSPEAKERS 46 95RPLC10 POWER (3X2.5)+1 AUDIO FOR ACTIVE LOUDSPEAKERS 46 95
page
www.referencelaboratory.com
QUICK GUIDEInstrument - Microphone - Speaker - DMX cables
DISPLAY ssttaanndd
Penguin Stand
CA
BLE
S MADE IN ITA
LY
REFERENCE llaabboorraattoorryy s.r.l.
S.S. 16 Km 309,530 • 60027 OSIMO (AN) • ITALY Phone + 39 071 7202120 r.a. • Fax + 39 071 [email protected] • www.referencelaboratory.com
We reserve the right to alter the designs, specifications, colours or condition of supply of any items without notice.