Catalogue 2010

2010

Books

CD-RoMs

DVD-RoMs

E-BloCks

kits

MoDulEs

catalogue

electronics worldwide



www.elektor.com

www.elektor.com/subs Tel. +44 (0) 20 8261 4509Or use the subscription order form near the end of the magazine.

Things of the past


Elektor is now & tomorrow

Cheaper than 11 issues from the newsstand

With every issue subscribers get up to 40% discounton selected Elektor products

As a welcome gift you get a free 2GB MP3 playerworth 31.50

No queues, travelling, parking fees or sold out Elektor is supplied to your doorstep every month

Always up to date read your copy before everyone else

Advantages to subscribers

Secure a head start in electronics with a subscription!

FREE 3-in-1

welcome

gift: 2GB MP

3 player,

USB Stick a

nd

Voice Recor

der+

PLA-

UK-1

Phot

o: S

iegf

ried

Sprin

ger /

PIX

ELIO

elektor_anz_2008_rz_PLA-UK-1.indd 1 26.06.2008 15:02:36 Uhr

Or use the subscription order form near the end of this catalogue

| ContentsBooks 4-8

ElEctronics 4

MicrocontrollErs 5

roBotics,PrograMMing 6

coMPutEr 7

audio 8

cd-roMs&dVd-roMs 10-13ElEktorVoluMEs 10-11

audio 11

ElEctronics 1213

E-blocksstarterkits 14-16

kits&Modules 18-26kits 18-21

ModulEs 22-26

overview 28-29

orderinginstructions,subscriptionrates 30

For all products described in this catalogue, due to practical constraints: prices from January 1, 2010 onwards errors & omissions excluded subject to price changes illustrations and specifications may differ

from published designs

OrderingElektorproductsmaybeorderednotjustfromselectedbookstoresandelectronicsretailstores,butalsodirectlyfromElektor.todoso,pleaseusetheorderFormatthebackofthiscatalogueororderquicklyandsafelythroughwww.elektor.com/shop.

USA & Canada:Elektor US4 Park StreetVernon CT 06066USA

Phone: 860-875-2199Fax: 860-871-0411

[email protected]

Rest of the World: ElektorRegus Brentford1000 Great West Road Brentford TW8 9HHUnited Kingdom

Tel. +44 20 8261 4509Fax +44 20 8261 4447

[email protected]

| Electronics

The 30x Circuits Series

309 CircuitsisBn978-0-905705-69-9

432pages

20.95|us$33.80

307 CircuitsisBn978-0-905705-62-0

342pages

17.95|us$29.00

308 CircuitsisBn978-0-905705-66-8

367pages

20.95|us$33.80

Among many other inspiring topics, the following categories are well presented in these books: test & measurement; RF (radio); computers & peripherals; audio & video; hobby & modelling; microcontrollers; home & garden; power supplies & battery chargers; etcetera.

304 CircuitsisBn978-0-905705-34-7

366pages

13.45|us$21.70

305 CircuitsisBn978-0-905705-36-1

369pages

16.95|us$27.40

the30xseriesofsummercircuitcompilationbookshavebeenbestsellersformanyyears.

Youcanusethesebooksnotonlyforbuildingthecircuitsdescribed,butalsoasatreasure

troveofideasorcircuitadaptionsforyourownexperiments.Manyreadershavefoundinthesebooksthatnewapproach,newconcept,ornew

circuittheywerelookingfor.

310 CircuitsisBn978-0-905705-78-1

544pages

29.90|us$48.30

|

Microcontroller Basics

Microcontrollers have become an indispensable part of modern electronics. They make things possible that vastly exceed what could be done previously. Innumerable applications show that almost nothing is impossible. Theres thus every reason to learn more about them. This book offers more than just a basic intro-duction. It clearly explains the technology using various micro-controller circuits and programs written in several different programming languages. In the course of the book, the reader gradually develops increased competence in converting his or her ideas into microcontroller circuitry.

isBn978-0-905705-67-5|230pages|19.95|us$32.20

PIC Microcontrollers50ProjectsforBeginnersandExperts

This hands-on book covers a series of exciting and fun projects with PIC microcontrollers. You can build more than 50 projects for your own use. The clear explanations, schematics, and pictures of each project on a breadboard make this a fun activity. You can also use this book as a study guide. The technical back-ground information in each project explains why the project is set up the way it is, including the use of datasheets. Even after youve built all the projects this book will still be a valuable refe-rence guide to keep next to your PC.

isBn978-0-905705-70-5|446pages|27.95|us$45.10

Universal Display Book for PIC Microcontrollers

This book begins with simple programs to flash LEDs, and eventually by stages to use other display indicators such as the 7-segment display and alphanumeric liquid crystal displays. As the reader progresses through the book, bigger and upgraded PIC chips are introduced, with full circuit diagrams and source code, both in assembler and C. In addition, a small tutorial is included using the MPLAB programming environment, together with the EAGLE schematic and PCB design package to enable readers to create their own designs using the books many case studies as working examples to work from.

isBn978-0-905705-73-6|192pages|23.00|us$37.10

Microcontrollers

|

Visual Basic for Electronics Engineering Applications5.0,6.0,VBa,.nEt,2005

This book is targeted towards those people that want to control existing or self-built hardware from their computer. After familia-rizing yourself with Visual Basic, its development environment and the toolset it offers are discussed in detail. Each topic is accompanied by clear, ready to run code, and where necessary, schematics are provided that will get your projects up to speed in no time.

isBn978-0-905705-68-2|476pages|29.95|us$48.40

Computer VisionPrinciplesandPractice

Computer vision is probably the most exciting branch of image processing, and the number of applications in robotics, automa-tion technology and quality control is constantly increasing. Unfortunately entering this research area is, as yet, not simple. Those who are interested must first go through a lot of books, publications and software libraries. With this book, however, the first step is easy. The theoretically founded content is under-standable and is supplemented by many practical examples.

isBn978-0-905705-71-2|320pages|32.00|us$51.70

Microcontroller Systems Engineering45projectsforPic,aVrandarM

Flowcode is one of the worlds most advanced graphical programming languages for microcontrollers. This book covers a series of exciting and fun Flowcode projects. You can build the projects for your own use. Or you can use the book as a study guide to learn more about microcontroller systems engineering and the PIC, AVR and ARM microcontrollers. The book starts very simply with a tutorial project and step-by-step instructions. As you go along the projects increase in difficulty and the new concepts are explained. Each project has a clear description of both hardware and software with pictures and diagrams, which explain not just how things are done but also why.

isBn978-0-905705-75-0|320pages|29.00|us$46.80

Robotics

Programming

|

SOLD OUT

Faultfinding in Computers and Digital CircuitstestingandMeasuring

Modern electronic equipment is characterized by the predomi-nance of digital techniques, high clock rates and complexity. This applies not only to specialized equipment such as micropro-cessor systems, microcontrollers and industrial PCs, but also to consumer items such as personal computers, multimedia de-vices, digital television and so on. The knowledge and technical skills needed to put such equipment into service, and to main-tain it in good working order, go beyond the level of simple self-help tips and basic measurements. The object of this book is to help the reader to acquire this knowledge and understanding.

isBn978-0-905705-60-6|627pages|31.15|us$62.30

Design your own Embedded Linux control centre on a PC

This book covers a do-it-your-self system made from recycled components. The main system described in this book reuses an old PC, a wireless mains outlet with three switches and one con-troller, and a USB webcam. All this is linked together by Linux. The book will serve up the basics of setting up a Linux environment including a software development environment so it can be used as a control centre. The book will also guide you through the necessary setup and configuration of a webserver, which will be the interface to your very own home control centre.

isBn978-0-905705-72-9|234pages|24.00|us$38.80

PC Interfaces under WindowsMeasurementandcontrolusingstandardports

PC Interfaces can be used for more than just the printer, mouse, modem and joy-stick! While it was relatively easy to directly access PC interfaces using a DOS computer, under Windows things are not all that simple. This book shows you how it can be done. The authors describe the DIY construction and program-ming of a number of highly interesting circuits.

isBn978-0-905705-65-1|265pages|27.95|us$45.10

Mouse InterfacingwithusBandPs/2

The mouse is one of the best proven, widely used and inexpen-sive man-machine interfaces ever devised, yet its presence in the world of embedded systems is still a rarity. This book describes in-depth how to connect the mouse into new embedded appli-cations. It details the two main interface methods, PS/2 and USB, and offers applications guidance with hardware and software examples plus tips on interfacing the mouse to typical micro-controllers. If you need to interface an embedded system to a mouse (PS/2 or USB), then this book will prove an invaluble tool. A wealth of clear illustrations enhance this highly readable text.

isBn978-0-905705-74-3|230pages|26.50|us$42.80

Computer

|

Modern High-end Valve Amplifiersbasedontoroidaloutputtransformers

Valve amplifiers are regarded by many to be the ne plus ultra when it comes to processing audio signals. The combination of classical technology and modern components has resulted in a revival of the valve amplifier. The use of toroidal-core output transformers, developed by the author (Menno van der Veen) over the past 15 years, has contributed to this revival. The most remarkable features of these transformers are their extremely wide frequency ranges and their very low levels of linear and nonlinear distortion.This book explains the whys and wherefores of toroidal output transformers at various technical levels and offers innovative solutions for achieving perfect audio quality. Do-it-yourself builders, as well as persons who want to gain a deeper technical understanding of the complex world of audio transformers, valve amplifiers and audio signal processing, will find this book a rich and useful source of information.

isBn978-0-905705-63-7|264pages|27.95|us$45.10

Build your own Audio Valve Amplifiers

To many people, the thermionic valve or electron tube is history. However, whether it is nostalgia, interest in the technical para-meters, the appeal of a gleaming amplifier chassis with softly glowing valves or perhaps the firm conviction that the sound of a valve cannot be bettered, it is a fact that the valve is making a come-back. This book contains, apart from construction projects for preamplifiers, power amplifiers, and amplifiers for musical instruments, information on the operation of electron tubes, while the first chapter gives a short history of the valve.

isBn978-0-905705-39-2|253pages|15.55|us$25.10

Designing Audio Circuits

How does speech, music, or, indeed, any sound get from the CD to the loudspeaker? This is a question that many people keep on asking and to which this book endeavours to give a comprehen-sible answer. Understanding the background of the process is a first requirement, which is why the author in the description of single components makes clear what exactly happens in the component. Designing circuits is well nigh impossible without an understanding of the various networks involved in the conversion of the input sound to the sound emanating from a loudspeaker. To this end, the author describes four important basic circuits using an operational amplifier, a component without which modern audio circuits can no longer be imagined. Building circuits, including ancillary and special ones, forms the practical parts of this book.

isBn978-0-905705-50-7|350pages|20.75|us$33.50

Audio

using Assembly, C and Flowcode

Further information and ordering at

www.elektor.com/distancelearning

DistAnCe LeArning Course

in this course you will learn how to program an embedded microcontroller.

We will start with the absolute basics and we will go into a lot of detail.

You cannot learn about software without understanding the hardware

so we will also take a close look at the components and schematics.

At the end of the course you will be able to design your own embedded

applications and write the appropriate software for it.

Contents:

Background Digital Ports Serial Communication

(RS232) Analog Signals Pulse Width Modulation Timers/Counters/Interrupts Memory LCD Display IC Communication SPI Communication USB Communication Configuration (Fuses) Answers to the assignments Appendix

Programming embedded PiC Microcontrollers

neW

Your course package:

Courseware Ring Binder

(800 pages)

CD-ROM including software

and example files

Application Board

Support at Elektor Forum

Elektor Certificate

Price: 395.00 / $645.00 / `445.00 Please note: to be able to follow this course, E-blocks hardware is required which you may already have (in part). All relevant products are available individually but also as a set at a discounted price. Please check www.elektor.com/distancelearningfor further information.

certificate

including

electronic

s worldw

ide

10 |

Elektor2004isBn978-90-5381-184-917.50|us$28.30

Elektor2005isBn978-90-5381-202-017.50|us$28.30

Elektor2003isBn978-90-5381-170-217.50|us$28.30

Elektor2001isBn978-90-5381-145-0

17.50|us$28.30

Elektor2006isBn978-90-5381-207-517.50|us$28.30

Elektor2002isBn978-90-5381-157-3

17.50|us$28.30

Elektor2007isBn978-90-5381-218-117.50|us$28.30

Elektor2000isBn978-90-5381-135-1

17.50|us$28.30

theElektorannualcd-roMs: All articles published in Elektor in pdf format Produce hard copy of PCB layouts at printer resolution Adapt PCB layouts using your favourite graphics program Zoom in / out on selected PCB areas Ideal companion for science projects, GCSE, etc. Export circuit diagrams and illustrations to other programs

(ideal for science projects) HTML overview for MacOS and Linux users

Elektor 2008isBn978-90-5381-235-817.50|us$28.30(dVd-roM)

Elektor Volumes on CD-ROM/DVD-ROM

| 11

Elektor 2008isBn978-90-5381-235-817.50|us$28.30(dVd-roM)

The Audio Collection I

More than 75 audio circuits from the 1995-1999 volumes of Elektor magazine. Highlights includes the surround-sound decoder, compact amp, sampling rate converter, battery powered preamplifier and Titan 2000. Using the included Acrobat Reader you are able to browse the articles on your computer, as well as print texts, circuit diagrams and PCB layouts.

isBn978-90-5381-121-4|12.90|us$20.90

The Audio Collection II

A unique CD-ROM for the true audio lover, containing no fewer than 75 audio designs from the 2000-2004 volumes of Elektor magazine. The articles on the CD-ROM cover test & measure-ment equipment, amplifiers, digital audio and loudspeaker technology. Highlights include the Crescendo Millennium Edition, Audio-DAC 2000, Audio-ADC 2000 and the IR-S/PDIF Transmitter and Receiver. Using the included Acrobat Reader you are able to browse the articles on your computer, as well as print texts, circuit diagrams and PCB layouts.

isBn978-90-5381-176-4|12.90|us$20.90

Audio CollectionElektor 1990-1999on DVD-ROM

Elektor 1990 through 199910fullvolumesondVd

Elektor wants to inspire its readers to enjoy electronics and computer technology, by presenting professionally designed circuits that are easy to build, and by describing the latest developments in electronics and technical information science.

This DVD-ROM contains the full range of 1990-1999 volumes (all 110 issues) of Elektor magazine. The more than 2,100 separate articles have been classified chronologically by their dates of publication (month/year), but are also listed alphabetically by topic. A comprehensive index enables you to search the entire DVD.

The DVD also contains (free of charge) the entire The Elektor Datasheet Collection 1-5 CD-ROM series, with the original full datasheets of semiconductors, memory ICs, microcontrollers, and much more.

isBn978-0-905705-76-7|69.00|us$111.30

12 |

Roboticsactuators&sensorsmechanical&electronicdesign

In Robotics, electronics meets information technology as well as mechanical engineering. The meeting results in a boundless experimental field. Do you want to explore it? For beginners the shortest way is along the kits line, while experienced users and programmers are best served by DIY construction. Both options are available on this CD-ROM thanks to a large collection of datasheets, software tools, tips en tricks, addresses, Internet links to assorted robot constructions and general technical information. All aspects of modern robotics are covered, from sensors to motors, mechanical parts to microcontrollers, not forgetting matching programming tools and libraries for signal processing. Robots built from LEGO bricks also get a fair amount of attention.

isBn978-90-5381-179-5|12.90|us$20.90

Home Automation

This CD-ROM provides an overview of what manufacturers offer today in the field of Home Networking, both wired and wireless. The CD-ROM contains specifications, standards and protocols of commercially available bus and network systems. For devel-opers, there are datasheets of specific components and various items with application data. End-users and hobbyists will find ready-made applications that can be used immediately. The documents included on the CD-ROM have been classified according to communication media: mains (power line), coaxial cable, telephone line and wireless (RF).

isBn978-90-5381-195-5|13.90|us$22.50

FPGA Coursein9chapters

FPGAs have established a firm position in the modern electronics designers toolkit. Until recently, these super components were practically reserved for specialists in high-tech companies. The nine lessons on this courseware CD-ROM are a step by step guide to the world of Field Programmable Gate Array technology. Subjects covered include not just digital logic and bus systems but also building an FPGA webserver, a 4-channel multimeter and a USB controller. The CD also contains PCB layout files in pdf format, a Quartus manual, project software and various supplementary instructions.

isBn978-90-5381-225-9|14.50|us$23.40

Electronics

| 1

USB ToolboxEmbeddedusBknowHow

This CD-ROM contains technical data about the USB interface. It also includes a large collection of data sheets for specific USB components from a wide range of manufacturers. There are two ways to incorporate a USB interface in a microcontroller circuit: add a USB controller to an existing circuit, or use a microcontroller with an integrated USB interface. Included on this CD-ROM are USB Basic Facts, several useful design tools for hardware and software, and all Elektor articles on the subject of USB.

isBn978-90-5381-212-9|19.90|us$32.10

ECD 5Elektorscomponentsdatabase

The program package consists of eight databanks covering ICs, germanium and silicon transistors, FETs, diodes, thyristors, triacs and optocouplers. A further eleven applications cover the calcu-lation of, for example, LED series droppers, zener diode series resistors, voltage regulators and AMVs. A colour band decoder is included for determining resistor and inductor values. ECD 5 gives instant access to data on more than 69,000 compo-nents. All databank applications are fully interactive, allowing the user to add, edit and complete component data.

isBn978-90-5381-159-7|24.90|us$40.20

Electronics

Ethernet Toolboxsoftwaretools&Hardwaretips

This CD-ROM contains all essential information regarding Ethernet interfaces! To help you learn about the Ethernet inter-faces, we have compiled a collection of all articles on this topic that have appeared in Elektor magazine and complemented them with additional documentation and links to introductory articles on Ethernet interfaces. It includes a collection of data sheets for dedicated Ethernet interface ICs from many different manufacturers. The CD-ROM provides a wealth of information about connectors and components for the physical layer (PHY) and specific software tools for use with the Ethernet (Software).

isBn978-90-5381-214-3|19.50|us$31.50

1 | E-blocks

starterkitProfessionalforPic

Flowcode 4 for PIC 177.00USB Multiprogrammer 75.00LED board 15.15Switch board 15.15LCD board 25.00PIC16F877 microcontroller 10.50

totalvalue 317.80

specialoffer 239.00

E-blocks are small circuit boards each of which contains a block of electronics that you would typically find in an electronic system. As each E-blocks module is complete in itself, you are able to concentrate on the main issues.

Our range of more than 43 hardware circuit blocks, CD-ROMs, sensors and a host of accessories and support materials, means that whatever you want to make, you can make it with E-blocks.

If you are a beginner then we suggest you start with one of our E-blocks Starter Kits. These have everything you need for your first project.

Easycankit

Flowcode 4 for PIC 177.002x USB Multiprogrammer 150.00LED board 15.152x LCD board 50.00Switch board 15.152x CAN board 70.002x PIC16F877 21.00

totalvalue 498.30

specialoffer 383.60

Freedownloadsavailableon

www.elektor.com/eblocks

-25% -23%

| 1 E-blocks

starterkitProfessionalforarM

Flowcode 3 for ARM 123.10ARM board 89.20LED board 15.15LCD board 25.00Switch board 15.15USB cable 3.70Power supply 12.30

totalvalue 283.60

specialoffer 162.00

starterkitProfessionalforaVr

Flowcode 3 for AVR 123.10AVR multiprogrammer 87.50LED board 15.15LCD board 25.00Switch board 15.15USB cable 3.70Power supply 12.30

totalvalue 281.90

specialoffer 162.00

EasyZigbeekit

Flowcode 4 for PIC 177.003x USB Multiprogrammer 225.003x Zigbee board 225.002x Sensor interface 42.503x PIC16F877A 31.50LED board 15.15LCD board 25.00Switch board 15.15

totalvalue 756.30

specialoffer 662.30

EasyrFidkit

Flowcode 4 for PIC 177.00USB Multiprogrammer 75.00LED board 15.15LCD board 25.00Switch board 15.15RFID board 87.50PIC16F877A 10.50

totalvalue 405.30

specialoffer 331.20 -18%

EXtra:twoMifareandtwoi-codeslityperFidcards

-12%

-40% -43%

1 |

FormulaFlowcodeBuggyusB-programmablerobotvehicle

A complete solution: robot + software + curriculum

Line following and maze solving High-tech specifications Also programmable with C or ASM E-blocks compatible Motivating for education and hobby

Built and ready to use for only

85.00 / US $137.10

Incl. CD-ROM

E-blocks

Flowcode 4 for PIC 177.00ECIO Application board 33.80Relay board 37.50LED board 15.15Switch board 15.15LCD board 25.00Opto-isolator board 31.2540 pin USB programmable device 25.50USB cable 3.70Power supply 12.30

totalvalue 376.35

specialoffer 298.00-21%

Easyinternetkit

Flowcode 4 for PIC 177.00USB Multiprogrammer 75.00LED board 15.15LCD board 25.00Switch board 15.15Internet board 75.00PIC16F877 10.50Ethernet crossover cable 5.30

totalvalue 398.10

specialoffer 322.40

-19%

starterkitforEcio

Take out a free subscription to E-weekly now

Do you want to stay up to date with electronics and computer technology? Always looking for useful hints, tips and interesting offers? Subscribe now to E-weekly, the free Elektor Newsletter.

Your benefits:The latest news on electronics in your own mailbox each fridayFree access to the News Archive on the Elektor website Youre authorized to post replies and new topics in our forum

Register today on www.elektor.com/newsletter

1 | Kits

Communicating with CAN(October 2008)

The CAN (Controller Area Network) protocol is now over 20 years old, but its still frequently used these days. It was specially designed for use in environments where you have a lot of electro-magnetic interference. Despite the fact that the CAN protocol is a serial protocol, it cant just be connected to (the serial port of) a computer. This all-round USB-CAN adapter is a compact and simple solution. With the help of the accompanying software you can follow all data communications taking place and carry out operations such as filtering and storage at the flick of a (mouse) switch.

PCB, partly populated

art.#071120-71|55.80|us$90.00

DCC Command Station(September 2008)

Electronics is making more and more inroads into the domain of model trains. Trains are now controlled with digital codes, and in many cases the entire system can be operated from a computer. Elektor presents a design for the device that forms the heart of a digitally controlled model railway: the DCC Command Station. The computing power in this design is provided by a high-performance ARM7 processor.

Kit of parts incl. programmed ARM module

art.#070989-71

88.50|us$142.80

Remote Control by Mobile Phone(November 2008)

Remote control using mobile phones and SMS (Text Messaging) is in great demand but many systems on sale suffer from imper-fections. This ingenious design combines powerful capabilities with low technical overheads. It has programmable AC mains switching outlets plus status reports by text message and alarm-activated delivery of GPS data.

Kit of parts, incl. PCB, programmed controller and all parts

art.#080324-71|55.80|us$90.00

| 19 Kits

DigiButler(May & April 2008)

A low-cost home automation server based on a Freescale Coldfire 32-bit microcontroller. The project has been designed with open source in mind and doubles as a powerful Coldfire develop-ment system using free CodeWarrior software from Freescale. DigiButler activates electrical appliances in and around the home, accepting on/off commands from a WAP phone, through an Ethernet network or via a webpage at an allocated IP address and with full access security.

Kit of parts including SMD-stuffed PCB, programmed micro-controller, all leaded parts and CD-ROM containing both Elektor articles, TBLCF documentation, datasheets, application notes and source code files

art.#071102-71|32.00|us$51.70

Elektor Internet Radio(April 2008)

In the good old days, you had to modulate audio signals onto an RF carrier so they could be received and demodulated to produce something more or less audible. Nowadays things are different: audio signals are compressed and put into IP packets that are streamed, and you can access every Internet radio programme in the world by receiving, buffering and decom-pressing these packages. This is all very easy with the Elektor Internet Radio. State-of-the-art hardware and all open-source!

PCB, SMD-populated

art.#071081-71|129.90|us$209.60

Data Logger deLuxe(March 2008)

We have had the pleasure of proposing various data acquisition units over the last few years. This Datalogger deLuxe is a nice exercise in product development. It actually utilises an SD card as the media for data storage. The hardware design is compact and that makes the firmware and software features even more interesting.

Kit of parts incl. PCB, programmed controller and display

art.#070745-71|76.20|us$122.90

20 |

SOLD OUT

Kits

CO2 Measurement(January 2008)

Carbon dioxide (CO2) is not just a threat to the environment, it is also an important and often ignored factor in determining air quality in the office and at home. Too high a concentration of CO2 leads to feelings of tiredness, disturbs concentration, and causes headaches. The Elektor CO2 meter makes it easy to deter-mine the concentration of carbon dioxide in the air. A micro-controller monitors the measured value and can trigger an alarm or start up a ventilation system when a preset threshold is exceeded.

Kit of parts incl. PCB, Sensor PCB, ATtiny26 and display

art.#070802-71|107.50|us$215.00

USB Flash Board(November 2007)

Flash microcontrollers are easy to program. In the past, program code was usually downloaded via a serial interface, but nowa-days many PCs (especially laptops) only have USB ports. This versatile Flash Board provides a solution to this problem. It is built around an AT89C5131A, which is an extended 8051-family microcontroller with an 80C52 core and a Full Speed USB port. As a sort of bonus, the IC has a complete update interface for down-loading new firmware. Atmel also provides suitable software in the form of its FLIP program, which is available free of charge.

Kit of parts incl. PCB and all components

art.#070125-71|39.90|us$64.40

ECIO PLC(March 2008)

This ECIO PLC board is suitable for quite complex control and automation projects. An ECIO acts as the brains of the board that has relays, opto-isolators, CAN (!) connectivity and an LCD. All this I/O capacity together with Flowcode allows the board to act as a versatile, powerful PLC. The LCD module is used to display ASCII characters to the user as a means of troubleshooting during the software development stage or for monitoring the system.

Kit of parts incl. PCB, ECIO-module and all other components

art.#070786-71|84.00|us$135.50

| 21

4-Channel Logic Analyser(September 2007)

A logic analyser is indispensable to unravel the time relation between logic signals in a circuit. This instrument is compact and battery-powered. Sampling speed is 2 MHz and sufficient memory is available to store 1024 samples of the measured signal. Logic signals can be viewed on a 64x128 graphic LCD.

Kit of parts incl. PCB, programmed controller, display, case and all parts

art.#060092-71|87.50|us$141.20

Kits

PIC In-Circuit Debugger/Programmer(October 2006)

PIC microcontrollers of the 8-bit 16F and 18F family can be found in many devices. A must for users is a means of loading programs and an In-Circuit Debugger (ICD) for tracking down program-ming errors. This project addresses both of these needs and is not only substantially compatible with Microchip technologys ICD2 module but also significantly cheaper.

Kit of parts incl. PCB, programmed microcontroller and all parts

art.#050348-71|40.40|us$65.20

USBprog(October 2007)

A new microcontroller, and yet another new programmer? Anyone involved with microcontrollers today will have a drawerful of printed circuit boards and adaptors for program-ming various devices. Enter USBprog, which can replace all those with a single unit. As a bonus, it can even be used as a generalpurpose USB I/O port and RS-232 adaptor.

PCB, SMD populated plus other parts

art.#060224-71|25.00|us$40.40

22 |

Demo video on

www.elektor.com/smtoven

SAPS-400(June 2008)

The switch-mode power supply unit (SMPSU) is renowned for its efficiency but notorious for its design complexity, compared with its predecessor the linear supply. With the SAPS-400 we offer a powerful, adjustable symmetrical supply thats ideal for lightweight audio power amplifiers and happily sits in less than a quarter of the space taken by a comparable supply of conven-tional design.

PCB, populated and tested, ready-mounted in aluminium U profile

art.#070688-91|165.00|us$266.20

Elektor SMT Oven(October 2008)

The Elektor SMT reflow oven will faithfully handle most if not all your soldering of projects using surface mount devices (SMDs). The oven is particularly suited for use not just in Colleges, work-shops, clubs and R&D laboratories, but also by the advanced electronics enthusiast. This precious workbench tool is at home where SMD boards have to be produced to a variety of require-ments on size, components and soldering materials.

Selected, tested & certified by Elektor Including Elektor-produced user manual Fully menu controlled Ideal for R&D laboratories, schools, small

companies and electronic enthusiasts Product support from Elektor Customer

Services

art.#080663-91|962.00|us$1665.00

Size: 4

18x3

72x2

50 m

m (16

.514

.610

inch

)

Modules

| 2

projects microcontrollers

18 elektor - 5/2008

Display Computer

M16C mini board with graphics, programmable in C and Basic

Dr Uwe Altenburg

The prices of graphic displays are dropping, which makes them increasingly attractive for many applications. However, programming a graphic display is distinctly more difficult than programming a text display. Our mini microcontroller board features a new display-on-glass module and a high-performance Renesas M16C microcontroller. The board is available fully assembled, and the microcontroller is pre-loaded with a TinyBasic interpreter to simplify the development of graphics applications even for novices.

There are countless applications for a stand-alone microcontroller board with a graphic display everything from model railways or regulating the tem-perature in your home or conservatory to robotics.

However, driving the display and pro-gramming the associated microcontrol-ler are tasks that exceed the skills of quite a few beginners. For this reason, in this article we present a ready-made board equipped with a display, a high-

performance 16-bit microcontroller, and even a Basic interpreter [1].

The powerful M16C the big broth-er of the R8C, which is well known to many of our readers can also be pro-grammed in C just like any other mi-crocontroller, so advanced users have plenty of opportunity to develop their own applications. In any case, you can take advantage of features such as 128 kB of flash memory, a 10-bit ADC, PWM signal generation and much

more, which make this mini board a truly versatile module.

DisplayElectronic Assembly has released a novel display on glass module with the part number EA-DOGM128, which is driven via an SPI interface [2]. This in-terface can be clocked at up to 20 MHz, so data transmission is not a significant bottleneck. Data is only transmitted in one direction here (from the microcon-

195/2008 - elektor

troller to the display), so only two sig-nal lines are necessary. All in all, only five microcontroller I/O pins are needed two for the data lines and three for the control lines (RESET, /CS and DATA).The display also features a very low profile of only 5.8 mm. The integrated LED backlight and automatic contrast adjustment ensure good legibility un-der all conditions, combined with low current consumption. Thanks to its pin-header contacts spaced at 2.54 mm, the module is easy to fit on a PCB. And

on top of all this, it is available in sev-eral colour combinations (e.g. from Re-ichelt Germany [3]).

MicrocontrollerOur search for a suitable microcon-troller led us to choose the Renesas M16C28/29 [4]. This 16-bit machine has an impressive array of features. With 128 kB of flash program memory, 4 kB of flash data memory and 12 kB of RAM, it is generously endowed

with storage capacity. Although the display has its own graphic memory, the data for the display must still be assembled in the microcontroller. A monochrome display with a resolution of 128 r 64 pixels requires an image memory of 1 kB in the microcontrol-ler for this purpose (128 r 64 v 8). The M16C28/29 has two DMA channels, so data can be copied directly from the image memory to the display without imposing any significant load on the microcontroller.

R13

10k

+5V

R12

100k

R7

1007

C2

100n

C1

100n

C5

100n

Q1 Q2

C8

22p

C7

22p

C11

15p

C10

15p

MAX202

T1OUTT2OUT

R1OUTR2OUT

R1IN

IC3

T1INT2IN

R2IN

C1

C1+

C2+

C2

11

1210

13

14

15

16V+

V-

7

89

3

1

4

5

2

6

C3

100n

C4

100n

C9

100n

C12

100n

C13

100n

+5V

JP3

10

1234567

89

+5V

R16

10k

R15

10k

R17

10k

R14

10k

P6.4P6.5P6.6

XCOUT

RESETCNVSS

P6.7

P0.0P0.1P0.2P0.3P0.4P0.5P0.6P0.7

P1.5P1.6P1.7

P2.0P2.1P2.2P2.3P2.4P2.5P2.6P2.7

SCLSDCSSOSDA

1234567

8910111213

JP2

14

1234567

89

10111213

JP1

14

+5V

P0.7P2.0P2.1P2.2P2.3P2.4P2.5P2.6P2.7

TXD/ARXD/B

NMIRESET

TXDRXDSDCSDAINT0INT1P0.0P0.1P0.2P0.3P0.4P0.5P0.6

CLK0RXD0TXD0P6.4P6.5P6.6

RESETRESET

P20/OUTC10/INPC10/SDAP21/OUTC11/INPC11/SCL

P17/INT5/INPC17/IDU

P70/TXD2/SDA/TA0OUT

P15/INT3/ADTRG/IDV

P22/OUTC12/INPC12P23/OUTC13/INPC13P24/OUTC14/INPC14P25/OUTC15/INPC15P26/OUTC16/INPC16P27/OUTC17/INPC17

P72/CLK2/TA1OUT

P60/RTS0/CTS0

P64/RTS1/CTS1

P104/AN4/KI0P105/AN5/KI1P106/AN6/KI2P107/AN7/KI3

P16/INT4/IDWP80/TA4OUT/U

P71/RXD2/SCL

P74/TA2OUT/W

P81/TA4IN/U

P75/TA2IN/WP76/TA3OUT

P90/TB0INP91/TB1INP92/TB2IN

P32/SOUT3

P77/TA3IN

P93/AN24

P100/AN0P101/AN1P102/AN2P103/AN3

P00/AN00P01/AN01P02/AN02P03/AN03

P30/CLK3P31/SIN3

P61/CLK0P62/RXD0P63/TXD0

P65/CLK1P66/RXD1P67/TXD1

P82/INT0P83/INT1

P73/CTS2

INT2/ZP

M16C29

NMI/SD

XCOUTCNVSS

RESET

IC1

AVCC

XCIN

VREF

AVSS XOUTP87/ P86/

P84/ P85/ VCC

P33

XIN VSS

36

10

6463

6058575655545352

51504948

474645

62

4443424140393837

32313029

35343328272625

16151413

12 11

2423222120191817

61

59

21

54

3

6

9 7 8

P6.7

INT0INT1

TXD2RXD2CLK2

TX/RXP7.4INT0P7.6INT1

CNVSS

NCP1117ST33IC2

C6

100n

+5V +VDD

D10

LL4148

Q9

BC548

R244k7

+5V

C18

1M

C17

1M

C16

1M

C15

1M

C14

1M

EA DOG M128LC DISPLAY

LCD1

CAP1

P

CAP1

N

CAP3

P

CAP2

P

CAP2

N

CS1B

VDD

2

VOUT

SCL

RST

VDD

VSS

VSS

36 SI

V0

21

V1

22

V2

23

V3

24

V4

25

3738

A03940

29 30 31 28 27 35 34

26 33

A1A2A3

18C119C220C332

123

C22

1M

C20

1M

C21

1M

C19

1M

R201007

R211007

R191007

Q3

BC548

+5V

R22

10k

R236807

R1

1k8

R6

3k3

R2

1k8

R8

3k3

R3

1k8

R9

3k3

R4

1k8

R10

3k3

R5

1k8

R11

3k3

P1.5

P1.6

P1.7

SCL

SSO

TXD0CLK0RXD0

TXD

RXD

P7.6

+5V

SW1

SW2SW3

R18

10k

TXD2

RXD2

RXD2

TX/RX

TXD2

P7.6

TXD/A

RXD/B

070827 - 11

SN75176BD

IC4

5

8

21

R

D

34

7

6

+VDD

Q1 = 18.432MHz Q2 = 32.768kHz

CSE

SP1

CST-931RP/A

Figure 1. The circuitry around the M16C is relatively uncomplicated.

The ATM18 project(April 2008)

ATM18 was developed jointly by Elektor and Computer:club2 (www.cczwei.de). Each month, the latest developments and applications of the ATM18 system are presented by Wolfgang Rudolph of Computer:club2 in a TV broadcast on the German NRW-TV network. Elektor is pleased to support the project through articles in the magazine, ready-stuffed boards supplied through the Elektor Shop, supplementary information, software downloads and the forum at www.elektor.com.

The series of articles presents a tiny processor module based on an ATmega88 microcontroller, ideal for use at the heart of any number of different projects. We begin with a reaction time tester and quickly move on to more advanced projects such as a precision weather station and a 3D magnetometer.

SMD-populated board with all cables (USB AVR Programmer)art.#080083-71|25.00|us$40.40

PCB, partly populated (ATM18-Testboard)art.#071035-92

29.90|us$48.30

PCB, partly populated (ATM18 Controller module)art.#071035-91

9.50|us$15.40

Display Computer(May 2008)

Programming a graphic display is distinctly more diffi-cult than programming a text display. Our mini micro-controller board features a new display-on-glass module and a high-performance Renesas M16C micro-controller. The board is available fully assembled, and the microcontroller is pre-loaded with a TinyBasic inter-preter to simplify the development of graphics appli-cations even for novices.

Populated PCB

art.#070827-91|79.90|us$128.90

Modules

2 |

Stand Alone OBD-2 Analyser(June 2007)

This handy analyser makes a simple job of rummaging through the information stored by the client-accessible part of your cars computer. It works with all current OBD-2 protocols and can read and erase trouble codes stored in the vehicle and reset the MIL display. All this without the help of a PC or a visit to a service station.

PCB, ready-assembled and tested (case and OBD-2 cable included)

art.#070038-93|68.50|us$110.50

Software Defined Radio(May 2007)

SD radio receivers use a bare minimum of hardware, relying instead on their software capabilities. The Elektor SDR project (by Burkhard Kainka) demonstrates whats achievable, in this case a multi-purpose receiver covering all bands from 150 kHz to 30 MHz. Its been optimised for receiving DRM and AM broad-casts but is also suitable for listening in to the world of amateur transmissions.

Ready-populated and tested board

art.#070039-91|86.50|us$139.60

ElekTrack(October 2007)

Position determination is all the rage. The manufacturer of the well-known TomTom navigation system has become a publicly traded company, and the alarm systems of expensive cars and other vehicles often positioning systems so they can report where the vehicle is located. However, such systems are rather expensive, so we decided to take the DIY approach and develop our own version, dubbed ElekTrack.

PCB, ready assembled and tested GPS/GSM-antenna, cable and case

art.#040161-91|249.00|us$401.70

Modules

| 2

SOLD OUT

SOLD OUT

Elektor RFID Reader(September 2006)

RFID cards are becoming increasingly popular in many fields where previously barcodes and chip cards were used. This programmable RFID reader can both read from and write to all types of RFID card that are compatible with the MIFARE and ISO 14443-A international standards.

Ready-built and tested PCB with USB port for connection to the PC. Including USB cable; not including display and enclosure.

art.#060132-91|44.90|us$72.50

LC displayart.#030451-72|11.00|us$17.80

Matching enclosureart.#060132-71|9.50|us$15.40

GameBoy Electrocardiogram (GBECG)(October 2006)

Lots of electronics hobbyist dream of recording an electrocardi-ogram (ECG) using a circuit built at home. Usually out of tech-nical curiosity, as numerous problems have to be resolved in order to properly sample the hearts electrical activity. Alterna-tively, some people require personal medical monitoring while under a cardiologists care. And then its great to be able to make your own ECG and show it to your GP or clinical staff.

PCB, ready built and tested

art.#050280-91|55.20|us$110.40

USB Stick with ARM and RS232(November 2006)

This neat stand-alone memory stick can store or transfer data from a microcontroller system in the field to a PC using its built-in USB and RS232 ports. Add to that an LCD and the simple to use data-logging mode is just the icing on the cake!

Assembled and tested board

art.#060006-91|79.90|us$149.95

Modules

2 | Modules

COMBINED PACkAGE MSC1210 board +

network extension +software +

all related Elektor articles

117.50 | US $189.60art.#044026-92

A 16-bit Tom Thumb(February 2006)

R8C Starter Kit comprising CD-ROM and R8C/13 microcontroller board with SIL pinheaders supplied seperately.

art.#050179-91|10.90|us$17.60

Application Board for R8C/13(March 2006)

The base camp for the R8C/13 microcontroller module. With 2 x serial I/O, USB, LCD, LEDs, analogue I/P, PSU and reset and MODE control.

PCB, ready-assembled and testedart.#050179-92|57.00|us$92.00

Micro Webserver(July/August 2004)

The Elektor Micro Webserver is a full-fledged node for Internet traffic, despite its quite modest dimensions and complexity. It consists of a microcontroller board with a network interface. Thanks to its compact construction and the versatility of the micro-controller board, the Micro Webserver is an ideal choice for measurement and control applications.

Ready-assembled and tested MSC1210 Boardart.#030060-91|87.50|us$141.20

Ready-assembled and tested Network Extension Board art.#044026-91|52.10|us$84.10

Now available for everybody atwww.elektorpcbservice.com

Elektor PCB ServiceYour professional PCBs and Prototypes

The advantages at a glance

No lm charges or start-up charges.

There is no minimum order quantity or charge for this service.

Available to private and commercial customers.

Well rst check if your project is producible. Well let you know within 4 hours!

In order to supply two PCBs, we make three. If the third board is also good, you receive it as well free of charge.

No surprises from the online price calculator

You can use our online payment module to pay easily, quickly and securely with Visa or MasterCard.

Elektor PCB Service is intended for prototype

builders and designers who want to have their

PCBs made to profes sional standards, and for

users who want customised versions of Elektor

PCBs. If you need a couple of protos with fast

turnaround or a batch of 5 to 50 units, we can

meet your needs at a favourable price.

Procedure:

1. Create your account

2. Place your order

3. Your project is checked

4. Payment

5. Your order is shipped

NEW!

ELEK UK0912 PCB Services s7.inddSec1:7 Sec1:7 28-10-2009 15:01:55

2 | OverviewBooks isBn us$ Page

304circuits 978-0-905705-34-7 13.45 21.70 4

305circuits 978-0-905705-36-1 16.95 27.40 4

307circuits 978-0-905705-62-0 17.95 29.00 4

308circuits 978-0-905705-66-8 20.95 33.80 4

309circuits 978-0-905705-69-9 20.95 33.80 4

310circuits 978-0-905705-78-1 29.90 48.30 4

BuildyourownaudioValveamplifiers 978-0-905705-39-2 15.55 25.10 8

computerVision 978-0-905705-71-2 32.00 51.70 6

designingaudiocircuits 978-0-905705-50-7 20.75 33.50 8

designyourownEmbeddedlinuxcontrolcentreonaPc 978-0-905705-72-9 24.00 38.80 7

Faultfindingincomputersanddigitalcircuits 978-0-905705-60-6 31.15 62.30 7

MicrocontrollerBasics 978-0-905705-67-5 19.95 32.20 5

MicrocontrollersystemsEngineering 978-0-905705-75-0 29.00 46.80 6

ModernHigh-endValveamplifiers 978-0-905705-63-7 27.95 45.10 8

Mouseinterfacing 978-0-905705-74-3 26.50 42.80 7

PcinterfacesunderWindows 978-0-905705-65-1 27.95 45.10 7

PicMicrocontrollers 978-0-905705-70-5 27.95 45.10 5

universaldisplayBookforPicMicrocontrollers 978-0-905705-73-6 23.00 37.10 5

VisualBasicforElectronicsEngineeringapplications 978-0-905705-68-2 29.95 48.40 6

cd-roMs/dVd-roMs isBn us$ Page

Elektor1990through1999(dVd-roM) 978-0-905705-76-7 69.00 111.30 11

Elektor2000 978-90-5381-135-1 17.50 28.30 10

Elektor2001 978-90-5381-145-0 17.50 28.30 10

Elektor2002 978-90-5381-157-3 17.50 28.30 10

Elektor2003 978-90-5381-170-2 17.50 28.30 10

Elektor2004 978-90-5381-184-9 17.50 28.30 10

Elektor2005 978-90-5381-202-0 17.50 28.30 10

Elektor2006 978-90-5381-207-5 17.50 28.30 10

Elektor2007 978-90-5381-218-1 17.50 28.30 10

Elektor2008(dVd-roM) 978-90-5381-235-8 17.50 28.30 10

Elektor2009(dVd-roM) 978-90-5381-251-8 17.50 28.30

Elektorscomponentsdatabase5 978-90-5381-159-7 24.90 40.20 13

Ethernettoolbox 978-90-5381-214-3 19.50 31.50 13

FPgacourse 978-90-5381-225-9 14.50 23.40 12

Homeautomation 978-90-5381-195-5 13.90 22.50 12

robotics 978-90-5381-179-5 12.90 20.90 12

theaudiocollection1 978-90-5381-121-4 12.90 20.90 11

theaudiocollection2 978-90-5381-176-4 12.90 20.90 11

usBtoolbox 978-90-5381-212-9 19.90 32.10 13

SOLD OUT

| 29 OverviewE-BLOCkS Art. # us$ Page

Easycankit EB551 383.60 618.80 14

Easyinternetkit EB486 322.40 520.00 16

EasyrFidkit EB539 331.20 534.20 15

EasyZigbeekit EB421 662.30 1068.30 15

FormulaFlowcodeBuggy HP794 85.00 137.10 16

starterkitEcio EB481 298.00 480.70 16

starterkitProfessionalforarM EB497 162.00 261.30 15

starterkitProfessionalforaVr EB645 162.00 261.30 15

starterkitProfessionalforPic EB682 239.00 385.50 14

kITS Art. # us$ Page

4-channellogicanalyser 060092-71 87.50 141.20 21

co2Measurement 070802-71 107.50 215.00 20

communicatingwithcan 071120-71 55.80 90.00 18

dataloggerdeluxe 070745-71 76.20 122.90 19

dcccommandstation 070989-71 88.50 142.80 18

digiButler 071102-71 32.00 51.70 19

EcioPlc 070786-71 84.00 135.50 20

Elektorinternetradio 071081-71 129.90 209.60 19

Picin-circuitdebugger/Programmer 050348-71 40.40 65.20 21

remotecontrolbyMobilePhone 080324-71 55.80 90.00 18

usBFlashBoard 070125-71 39.90 64.40 20

usBprog 060224-71 25.00 40.40 21

MODULES Art. # us$ Page

a16-bittomthumb 050179-91 10.90 17.60 27

applicationBoardforr8c/13 050179-92 57.00 92.00 27

displaycomputer 070827-91 79.90 128.90 23

Elektrack 040161-91 249.00 401.70 24

ElektorrFidreader 060132-91 44.90 72.50 25

ElektorsMtoven 080663-91 962.00 1665.00 22

gBEcg-gameBoyElectrocardiogram 050280-91 55.20 110.40 25

MicroWebserver(package) 044026-92 117.50 189.60 27

saPs-400 070688-91 165.00 266.20 22

softwaredefinedradio 070039-91 86.50 139.60 24

standaloneoBd-2analyser 070038-93 68.50 110.50 24

theatM18project:controllermodule 071035-91 9.50 15.40 23

theatM18project:testboard 071035-92 29.90 48.30 23

theatM18project:usBaVrProgrammer 080083-71 25.00 40.40 23

usBstickwitharMandrs232 060006-91 79.90 149.95 25

SOLD OUT

SOLD OUT

SOLD OUT

0 |

Please use the Order Form at the back of this catalogue or order quickly and safely through www.elektor.com/shop. Order Forms can be sent by post or fax to our Brentford address (see page 3).Orders placed on our Brentford office must include P&P charges (Priority or Standard) as follows:Europe: 6.00 (Standard) or 7.00 (Priority) Outside Europe: 9.00 (Standard) or 11.00 (Priority)

Subscription Rates for Annual Subscription to Elektor

Prices subject to change

The standard subscription order period is twelve months. If a permanent change of address during the subscription period means that copies have to be despatched by a more expensive service, no extra charge will be made. Conversely, no refund will be made, nor expiry date extended, if a change of address allows the use of a cheaper service. Please note that new subscriptions take about four weeks from receipt of order to become effective.

How to payAll orders must be accompanied by the full payment, including postage and packing charges as stated above or advised by Customer Services staff.

Bank transfer into account no. 40209520 held by Elektor Electronics with ABN-AMRO Bank, London. IBAN: GB35 ABNA 4050 3040 2095 20. BIC: ABNAGB2L. Currency: sterling (UKP). Please ensure your full name and address gets communicated to us.Cheque sent by post, made payable to Elektor Electronics. We can only accept sterling cheques and bank drafts from UK-resident customers or subscribers. We regret that no cheques can be accepted from customers or subscribers in any other country.Giro transfer into account no. 34-152-3801, held by Elektor Electronics. Please do not send giro transfer/deposit forms directly to us, but instead use the National Giro postage paid envelope and send it to your National Giro Centre.Credit card VISA and MasterCard can be processed by mail, email, web, fax and telephone. Online ordering through our website is SSL-protected for your security.

For USA & CanadaOrders must be prepaid. We accept checks or money orders (in US $ drawn on a US bank only), VISA, Mastercard, Discover, and American Express credit cards. We do not accept C.O.D. orders. We also accept wire transfers. Add $20 to cover fees charged for these transfers.

Standard PlusUnited Kingdom 49.00 61.50Surface MailRest of the World 63.00 75.50

AirmailRest of the World 79.00 91.50

USA & Canada For US$-prices please check www.elektor.com/usa

Ordering InstructionsSubscription Rates

Yes, I am taking out an annual subscription to Elektor and receive a free 2GB MP3 player *.

* Offer available to Subscribers who have not held a subscription to Elektor during the last 12 months. Offer subject to availability. See page 30 for rates and conditions.

Method of PAyMent(see reverse before ticking as appropriate)

Bank transfer

Cheque (UK-resident customers only)

Giro transfer

Expiry date: _________________________

Verification code: _____________________

I would like:

Standard Subscription (11 issues)Subscription-Plus (11 issues plus the elektor Volume 2009 dVd-RoM)

Method of PAyMent(see reverse before ticking as appropriate)

Bank transfer

Cheque (UK-resident customers only)

Giro transfer

Expiry date: _________________________

Verification code: _____________________

Sub-total

P&P

Total paid

description Qty.Price

See page 30 for rates and conditions.




Name

Adress + Post code

Email

Signature

Date

elektor

Regus Brentford1000 Great West RoadBrentford TW8 9HHUnited Kingdom

elektor

Regus Brentford1000 Great West RoadBrentford TW8 9HHUnited Kingdom

Name

Adress + Post code

Email

Signature

Date

Catalogue 2010

Documents

Transcript of Catalogue 2010