CATALOGUE 2008/1 LIGHTING - North America · according to UNI EN 12464-1 Italy IMQ Certified...
Transcript of CATALOGUE 2008/1 LIGHTING - North America · according to UNI EN 12464-1 Italy IMQ Certified...
2002/96/CE WEEE DIRECTIVE
The amount of waste from electrical and electronic equipment is increasing (WEEE) amongst which
most light sources have been included (fluorescent lamps not included).
The main purpose of the Directive is to prevent WEEE being thrown onto tips or incinerators causing
further damage to the environment.
The 2002/96/CE Directive has tried to introduce a control mechanism that envisions controlled
management of the device at the end of its life span, favouring its re-use or recycling. Moreover,
the legislative mechanism promotes design and production concepts that make disposal of the
products easier both in terms of dismantling and of materials.
In the case of bulbs, the financing of the activities connected to the collection, management and
recycling of WEEE at the end of their life span is guaranteed by a visible fee applied at the
moment of sale.
All of the commercial chain is asked to contribute both economically and actively so that the spirit
of the Directive is respected (and the environment protected).
In Italy, the Directive has been implemented by Decree 151 dated 25th July 2005 and successively
integrated with other existing devices.
MAIN OBLIGATIONS ENVISIONED
The manufacturer (intended broadly and however substantially whoever places his own brand
name on the goods and whoever imports from non-member countries) is responsible for the costs
of disposal of their own products at the end of their life span.
The point of sale must receive the product at the end of its life span if the same is replaced with
a new one of the same type.
The customer is asked to handle the product at the end of its life span with intelligence taking
it to an equipped area, a point of sale or by following instructions provided by the manufacturer.
Beghelli has always been sensitive to environmental problems and is member of the ECOLIGHT
consortium to which it gives the whole sum of the visible fee collected.
Choosing products of companies that belong to voluntary consortiums for the recovery and
recycling of the goods is a responsibile choice and ecologically correct in favour of the environment
and our future.
The products that fall within the field of application of the WEEE Directive are identified
by the symbol indicated at the side (a version without the bar also exists).
Symbols and type-approval
DARKLIGHT
Fixture equipped with low luminance reflector
according to UNI EN 12464-1Italy IMQ Certified Product
30%Space saving range of appliances designed to
reduce warehouse and transport space. The
percentage indicates the space saved in relation
to the product
IP65
Class II insulation fixtures
Fixture without this symbol must be considered class I
Level of protection against external factors
(According to IEC EN 60529)
IP20-D-
Level of protection against external factors with
third digit as protection index against electric
shocks (According to IEC EN 60529)
Note:products marked with third degree of protection “D” are equivalent
to products classified with protection level IP40
according to IEC EN 60598-1:2001, implemented 31-12-2004,
therefore ideal for use in areas suitable with its features.
T5Linear fluorescent lamp Ø 16 mm
T8Linear fluorescent lamp Ø 26 mm
F Fixtures suitable for installation on normallly
flammable surfaces
Appliances conform to CE Directives
M M
Indicates the temperature of the glow wire test
(EN 60598-1)
Fixtures suitable for installation on surfaces with
unknown flammable features
850°C
PGYMNASIUM
Appliances suitable for fitting in gymnasiums
1
FLOODLIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
HIGHBAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
PROJECTORS AND REFLECTORS 3
T8 RECESSED LUMINARIES 9
INC 236 - 418 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
T8 SURFACE LUMINARIES 15
P 236 - 258 - 418 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
BATTEN 23
T8 BATTEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
T5 BATTEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
DOWNLIGHT 29
SD - HIDD - HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
ADJUSTABLE RECTANGULAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
ADJUSTABLE ROUND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
WALL LIGHT 37
WL 315 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
PARTS 41
STARTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
CAPACITORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
POWER SUPPLY UNITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
INDEX BY REFERENCE NUMBER 45
Index
4
Projectors
Adjustable projector with waterproof die-cast aluminium bodythat is coated with grey RAL 9006 polyester powder. Easyaccess to the lamp and feeding compartment through tiltingfront frame. The feeder is equipped with a temperature pro-tection device. Supplied with a 3-pole screw type terminalblock. REFLECTOR: Anodically oxidised, polished, hammered aluminiumDIFFUSER: Tempered glass, resistant to thermal and mechanicalshocks.LAMPHOLDER: Ceramic
CONFORMS TO REGULATIONS: EN60598-1 e EN60598-2-5
Floodlight
SIZE AND WEIGHT
Watt L B H Weight
70 265 125 400 4.6
150 265 125 400 5.5
250 375 150 510 9.5
400 375 150 510 10
Size in mm, weight in Kg.
Fixture supplied with lamp
Nylon cable gland PG 13.5
LAMPHOLDER SOCKET
E40 Rx7s
EQUIPMENT
NOTESurface exposed to wind:for 70W and 150W it is 0.089m2
for 250W and 400W it is 0.16m2
Projectors
5
Watt Ord. N° Description EAN Lamp Socket Current Voltage Reflector Pcs/Pack
70W 77000 F 70 SIMM 8002219585554 MH Rx7s 0.98A 230V SYMMETRIC 1
150W 77001 F 150 SIMM 8002219585561 MH Rx7s 1.8A 230V SYMMETRIC 1
250W 77002 F 250 SIMM 8002219585578 MH E40 2.15A 230V SYMMETRIC 1
400W 77003 F 400 SIMM 8002219585585 MH E40 3.25A 230V SYMMETRIC 1
70W 77004 F 70 ASS 8002219585592 MH Rx7s 0.98A 230V ASSYMMETRIC 1
150W 77005 F 150 ASS 8002219585608 MH Rx7s 1.8A 230V ASSYMMETRIC 1
250W 77006 F 250 ASS 8002219585615 MH E40 2.15A 230V ASSYMMETRIC 1
400W 77007 F 400 ASS 8002219585622 MH E40 3.25A 230V ASSYMMETRIC 1
FLOODLIGHT - METAL HALIDE
Watt Ord. N° Description EAN Lamp Socket Current Voltage Reflector Pcs/Pack
70W 77008 F 70 SIMM SAP 8002219588241 SAP Rx7s 0.98A 230V SYMMETRIC 1
150W 77009 F 150 SIMM SAP 8002219588258 SAP Rx7s 1.8A 230V SYMMETRIC 1
250W 77010 F 250 SIMM SAP 8002219588265 SAP E40 3.0A 230V SYMMETRIC 1
400W 77011 F 400 SIMM SAP 8002219588272 SAP E40 4.4A 230V SYMMETRIC 1
70W 77012 F 70 ASS SAP 8002219588289 SAP Rx7s 0.98A 230V ASSYMMETRIC 1
150W 77013 F 150 ASS SAP 8002219588296 SAP Rx7s 1.8A 230V ASSYMMETRIC 1
250W 77014 F 250 ASS SAP 8002219588302 SAP E40 3.0A 230V ASSYMMETRIC 1
400W 77015 F 400 ASS SAP 8002219588319 SAP E40 4.4A 230V ASSYMMETRIC 1
FLOODLIGHT -HIGH PRESSURE SODIUM
Article Ord. No Description Pcs/pack
F70/F150 77900 SMALL PROTECTION GRID 1
F250/F400 77901 BIG PROTECTION GRID 1
ACCESSORIES to be ordered separately
230V - 50Hz
230V - 50Hz
950°CIP65 IK08
Fixture supplied with lamp 4300°K and Nylon cable gland PG 13.5
Fixture supplied with lamp 4300°K and Nylon cable gland PG 13.5
Protection grid powder coated in grey colour RAL 9006
PGYMNASIUMS
6
Reflector
Waterproof reflector for suspended mounting.POWER SUPPLY COMPARTMENT: Waterproof polyester powdercoated die-cast aluminium, grey RAL 9006 with access hatch tothe terminal board compartment. Internal electrical auxiliaries trayequipped with safety chain.REFLECTOR: light diffusing, parabolic shape, pressed, anodizedand polished Aluminium reflector. Equipped with tempered glassand anti-fall connectors.LAMPHOLDER: Ceramic and adjustable into various positions tomodify the photometric emission.AUXILIARIES: 230V/50Hz power supply unit equipped with thermal pro-tection and power factor correction. Internal cables insulated in silico-ne with fibreglass sheath with section of 1.0 mm2. 2P+earth terminalblock with maximum sections of wires measuring 2.5 mm2.EQUIPMENT: Silicone rubber gaskets. Steel threaded eyebolt.Available with auxiliary lampholder (AUX) socket E27, forlamps up to 500W, mains network and automatic switch offNylon cable gland PG 13.5 providedCONFORMS TO REGULATION: EN60598-1
Highbay
SIZE AND WEIGHT
Watt Ø max H weight
250 494 580 10
400 494 580 10.5
size in mm, weight in Kg.
LAMPHOLDER SOCKET
E40 + E27AUX
Reflectors
7
Watt Ord.N° Description EAN Lamp Socket Current Voltage Features Pcs/Pack
250W 76000 H 250 MH 8002219585493 MH E40 2.15A 230V - 1
400W 76001 H 400 MH 8002219585509 MH E40 3.25A 230V - 1
250W+AUX 76000LA H 250 MH LA 8002219588203 MH+INC E40+E27 2.15A 230V aux 500W max 1
400W+AUX 76001LA H 400 MH LA 8002219588210 MH+INC E40+E27 3.25A 230V aux 500W max 1
HIGHBAY - METAL HALIDE
Watt Ord.N° Description EAN Lamp Socket Current Voltage Features Pcs/Packs
250W 76100 H 250 HQI/SAP 8002219585516 HQI/SAP E40 3.0A 230V - 1
400W 76101 H 400 HQI/SAP 8002219585523 HQI/SAP E40 4.4A 230V - 1
250W+AUX 76100LA H 250 HQI/SAPLA 8002219588227 HQI/SAP+INC E40+E27 3.0A 230V aux 500W max* 1
400W+AUX 76101LA H 400 HQI/SAPLA 8002219588234 HQI/SAP-INC E40+E27 4,4A 230V aux 500W max* 1
HIGHBAY - HIGH PRESSURE SODIUM
Article Ord.N° Description Pcs/Packs
H250/H400 12020 PROTECTION GRID 1
ACCESSORIES to order separately
230V - 50Hz
230V - 50Hz
960°CIP65 IK08
*Auxiliary lamp for immediate relighting with automatic switch off
*Auxiliary lamp for immediate relighting with automatic switch off
Galvanised steel protection grid
PGYMNASIUM
10
T8 Recessed luminaries
Appliances for recessed installation on M600/M625panels with exposed grid ceiling. The height of only69mm makes the product particularly suitable inrooms with reduced dimension ceilings. BODY: Polyester powder coated sheet steel,white RAL9003 body with anti-yelllowing treatment.LAMPHOLDER: In white polycarbonate and con-nectors in phospher bronze.CABLES: Rigid wire internal cables with section of0.50 mm2 and sheath in PVC-HT resistant to 105°C in compliance with the IEC 60598-1.2P+earth terminal block with maximum sections of wiresaccepted 2.5 mm2.Available also in emergency version (TR).
CONFORMS TO REGULATIONS: EN60598-1 and EN60598-2-2 -
Inc 236 - 418
SIZE AND WEIGHT
Watt L B H weight
2X36 1195 293 69 -
4X18 594 594 69 3.5
4X18 (625) 625 625 69 3.5
Size in mm, weight in Kg.
LAMPHOLDER SOCKET
G13
AVAILABLE LOUVRES (DESCRPTION AT END OF CHAPTER)
MOUNTING LAYOUT AND LOUVRE DESCRIPTION AT END OF CHAPTER
A J XB Dark Light
T8 Recessed luminaries
11
Watt Ord.N° Description EAN Lamp Socket IP Light Louvre Pcs/Pack
2x36 70000 INC 236 A 8002219584786 T8 G13 20 M600 A 2
2x36 70001 INC 236 B 8002219584793 T8 G13 20 M600 B 2
2x36 70002 INC 236 J 8002219584809 T8 G13 20 M600 J 2
2x36 70003 INC 236 X 8002219584816 T8 G13 40 M600 X 2
INC 236 - Low loss ballast
Watt Ord. N° Description EAN Lamp Socket IP Light Louvre Pcs/Pack
2x36 70000RE INC 236 RE A 8002219584823 T8 G13 20 M600 A 2
2x36 70001RE INC 236 RE B 8002219584830 T8 G13 20 M600 B 2
2x36 70002RE INC 236 RE J 8002219584847 T8 G13 20 M600 J 2
2x36 70003RE INC 236 RE X 8002219584854 T8 G13 40 M600 X 2
INC 236 - Electronic ballast
230V - 50Hz
230V - 50Hz
960°C650°CIP40 IP20
DARKLIGHT T8
Watt Ord.N° Description EAN Lamp Socket IP Light Louvre Battery Duration Pcs/Pack
2x36 70000TR INC 236 A TR 8002219588005 T8 G13 20 M600 A NiCd 4.8V-1.7Ah 1h 2
2x36 70001TR INC 236 B TR 8002219588012 T8 G13 20 M600 B NiCd 4.8V-1.7Ah 1h 2
2x36 70002TR INC 236 J TR 8002219588029 T8 G13 20 M600 J NiCd 4.8V-1.7Ah 1h 2
2x36 70003TR INC 236 X TR 8002219588036 T8 G13 40 M600 X NiCd 4.8V-1.7Ah 1h 2
Emergency version
(louvre X only) (low loss ballast excluded)
12
T8 Recessed luminaries
Louvre A - White coated anti-yellowing aluminim.
White polyester powder coated aluminium sheet louvre with cross fins and flat longitudinalreflectors. Locking clips keep the unit in maintenance position.
Louvre B - Mirror finish low luminance Dark Light EN12464-1 (500cd/m2)
Anti-iridescent, anodized polished alimnium sheet louvre with low luminance level, Darklight type, longitudinal reflectors and cross fins, double parabolic effect. Locking clips keepthe unit in maintenance position.
Watt Ord.N° Description EAN Lamp Socket IP Module Louvre Pcs/Pack
4x18 70200 INC 418 A 8002219584861 T8 G13 20 M600 A 2
4x18 70201 INC 418 B 8002219584878 T8 G13 20 M600 B 2
4x18 70202 INC 418 J 8002219584885 T8 G13 20 M600 J 2
4x18 70203 INC 418 X 8002219584892 T8 G13 40 M600 X 2
INC 418 - Low loss ballast - M600
230V - 50Hz
Watt Ord.N° Description EAN Lamp Socket IP Module Louvre Battery Duration Pcs/Pack
4x18 70200TR INC 418 A TR 8002219588043 T8 G13 20 M600 A NiCd 4.8V-1.7Ah 2h 2
4x18 70201TR INC 418 B TR 8002219588050 T8 G13 20 M600 B NiCd 4.8V-1.7Ah 2h 2
4x18 70202TR INC 418 J TR 8002219588067 T8 G13 20 M600 J NiCd 4.8V-1.7Ah 2h 2
4x18 70203TR INC 418 X TR 8002219588074 T8 G13 40 M600 X NiCd 4.8V-1.7Ah 2h 2
Emergency version - M600
Watt Ord.N° Description EAN Lamp Socket IP Module Louvre Pcs/Pack
4x18 70300 INC 418 A 8002219588654 T8 G13 20 M625 A 2
4x18 70301 INC 418 B 8002219588661 T8 G13 20 M625 B 2
4x18 70302 INC 418 J 8002219588678 T8 G13 20 M625 J 2
4x18 70303 INC 418 X 8002219588685 T8 G13 40 M625 X 2
M625
Watt Ord.N° Description EAN Lamp Socket IP Module Louvre Battery Duration Pcs/Pack
4x18 70300TR INC 418 A TR 8002219588739 T8 G13 20 M625 A NiCd 4.8V-1.7Ah 2h 2
4x18 70301TR INC 418 B TR 8002219588746 T8 G13 20 M625 B NiCd 4.8V-1.7Ah 2h 2
4x18 70302TR INC 418 J TR 8002219588753 T8 G13 20 M625 J NiCd 4.8V-1.7Ah 2h 2
4x18 70303TR INC 418 X TR 8002219588760 T8 G13 40 M625 X NiCd 4.8V-1.7Ah 2h 2
Emergency version - M625
T8 Recessed luminaries
13
Louvre J - Satin finish aluminium with rectangular cells.
Satin finish aluminium sheet louvre with cross fins and flat longitudinal reflectors,rectangular cells. Ribbed cross fins with micro-mirror effect. Locking clips keep the unitin maintenance position.
Louvre X - Prismatic Methacrylate Sheet.
Flat prismatic methacrylate sheet closing panel. Locking clips keep the unit inmaintenance position.
Watt Ord.N° Description EAN Lamp Socket IP Module Louvre Pcs/Pack
4x18 70200RE INC 418 RE A 8002219584908 T8 G13 20 M600 A 2
4x18 70201RE INC 418 RE B 8002219584915 T8 G13 20 M600 B 2
4x18 70202RE INC 418 RE J 8002219584922 T8 G13 20 M600 J 2
4x18 70203RE INC 418 RE X 8002219584939 T8 G13 40 M600 X 2
INC 418 - Electronic ballast - M600
230V - 50Hz
M625
Watt Ord.N° Description EAN Lamp Socket IP Module Louvre Pcs/Pack
4x18 70300RE INC 418 RE A 8002219588692 T8 G13 20 M625 A 2
4x18 70301RE INC 418 RE B 8002219588708 T8 G13 20 M625 B 2
4x18 70302RE INC 418 RE J 8002219588715 T8 G13 20 M625 J 2
4x18 70303RE INC 418 RE X 8002219588722 T8 G13 40 M625 X 2
Emergency version - M625
Watt Ord.N° Description EAN Lamp Socket IP Module Louvre Battery Duration Pcs/Pack
4x18 70300RETR INC 418 RE A TR 8002219588852 T8 G13 20 M625 A NiCd 4,8V-1,7Ah 2h 2 -
4x18 70301RETR INC 418 RE B TR 8002219588869 T8 G13 20 M625 B NiCd 4,8V-1,7Ah 2h 2 -
4x18 70302RETR INC 418 RE J TR 8002219588876 T8 G13 20 M625 J NiCd 4,8V-1,7Ah 2h 2 -
4x18 70303RETR INC 418 RE X TR 8002219588883 T8 G13 40 M625 X NiCd 4,8V-1,7Ah 2h 2 -
Mounting layout
M600/625 panels for exposed grid ceiling
M600/M625 positioned on grips
16
T8 Surface luminaries
Ceiling luminaries also suitable for installation onflammable surfacesBODY: Steel sheet polyester powder coatedwhite RAL 9003 body with anti-yelllowing treatment.LAMPHOLDER: In white polycarbonate and con-nectors in phospher bronzeCABLES: Rigid wire internal cables with section of0.50 mm2 and sheath in PVC-HT resistant to 105°Cin compliance with the IEC 60598-41Directive.2P+earth terminal board with maximum acceptedwire sections of 2.5 mm2.Available also in emergency version (TR).
CONFORMS TO REGULATION: EN60598-1
P 236 - 258 - 418
SIZE AND WEIGHT
Watt L B H weight
2X36 1221 295 72 -
2X58 1535 295 72 -
4X18 611 595 72 -
Dimensions in mm, weight in Kg.
MOUNTING PATTERN
Watt A B
2X36 1132 220
2X58 1148.6 220
4X18 522 520
LAMPHOLDER SOCKET
G13
AVAILABLE LOUVRES (description at end of chapter)
A J XB Dark Light
T8 Surface luminaries
17
Watt Ord. N° Description EAN Lamp Socket Ballast IP Louvre Pcs/Pack
2x36 73000 P 236 A 8002219584946 T8 G13 B2 20 A 2
2x36 73001 P 236 B 8002219584953 T8 G13 B2 20 B 2
2x36 73002 P 236 J 8002219584960 T8 G13 B2 20 J 2
2x36 73003 P 236 X 8002219584977 T8 G13 B2 40 X 2
P 236 - Low loss ballast
Watt Ord. N° Description EAN Lamp Socket Ballast IP Louvre Pcs/Pack
2x36 73000RE P 236 RE A 8002219584984 T8 G13 RE 20 A 2
2x36 73001RE P 236 RE B 8002219584991 T8 G13 RE 20 B 2
2x36 73002RE P 236 RE J 8002219585004 T8 G13 RE 20 J 2
2x36 73003RE P 236 RE X 8002219585011 T8 G13 RE 40 X 2
P 236 - Electronic ballast
230V - 50Hz
230V - 50Hz
Watt Ord. N° Description EAN Lamp Socket IP Ballast Louvre Battery Duration Pcs/Pack
2x36 73000TR P 236 A TR 8002219588081 T8 G13 20 B2 A NiCd 4.8V-1.7Ah 1h 2
2x36 73001TR P 236 B TR 8002219588098 T8 G13 20 B2 B NiCd 4.8V-1.7Ah 1h 2
2x36 73002TR P 236 J TR 8002219588104 T8 G13 20 B2 J NiCd 4.8V-1.7Ah 1h 2
2x36 73003TR P 236 X TR 8002219588111 T8 G13 40 B2 X NiCd 4.8V-1.7Ah 1h 2
Emergency version
Emergency version
960°CIP40 IP20
DARKLIGHT T8 650°C
(louvre X only) (low loss ballast excluded)
Watt Ord. N° Description EAN Lamp Socket IP Ballast Louvre Battery Duration Pcs/Pack
2x36 73000RETR P236 RE A TR 8002219588890 T8 G13 20 RE A NiCd 4,8V-1,7Ah 1h 2 -
2x36 73001RETR P236 RE B TR 8002219588906 T8 G13 20 RE B NiCd 4,8V-1,7Ah 1h 2 -
2x36 73002RETR P236 RE J TR 8002219588913 T8 G13 20 RE J NiCd 4,8V-1,7Ah 1h 2 -
2x36 73003RETR P236 RE X TR 8002219588920 T8 G13 40 RE X NiCd 4,8V-1,7Ah 1h 2 -
18
T8 Surface luminaries
Watt Ord.N. Description EAN Lamp Socket Ballast IP Louvre Pcs/Pack
2x58 73100 P 258 A 8002219585028 T8 G13 B2 20 A 2
2x58 73101 P 258 B 8002219585035 T8 G13 B2 20 B 2
2x58 73102 P 258 J 8002219585042 T8 G13 B2 20 J 2
2x58 73103 P 258 X 8002219585059 T8 G13 B2 40 X 2
P 258 - Low loss ballast
Watt Ord. N° Description EAN Lamp Socket Ballast IP Louvre Pcs/Pack
2x58 73100RE P 258 RE A 8002219585066 T8 G13 RE 20 A 2
2x58 73101RE P 258 RE B 8002219585073 T8 G13 RE 20 B 2
2x58 73102RE P 258 RE J 8002219585080 T8 G13 RE 20 J 2
2x58 73103RE P 258 RE X 8002219585097 T8 G13 RE 40 X 2
P 258 - Electronic ballast
230V - 50Hz
230V - 50Hz
Watt Ord. N° Description EAN Lamp Socket IP Ballast Louvre Battery Duration Pcs/Pack
2x58 73100TR P 258 A TR 8002219588128 T8 G13 20 B2 A NiCd 4.8V-1.7Ah 1h 2
2x58 73101TR P 258 B TR 8002219588135 T8 G13 20 B2 B NiCd 4.8V-1.7Ah 1h 2
2x58 73102TR P 258 J TR 8002219588142 T8 G13 20 B2 J NiCd 4.8V-1.7Ah 1h 2
2x58 73103TR P 258 X TR 8002219588159 T8 G13 40 B2 X NiCd 4,8V-1.7Ah 1h 2
Emergency version
960°CIP40 IP20
DARKLIGHT T8 650°C
(louvre X only) (low loss ballast excluded)
T8 Surface luminaries
19
Watt Ord. N° Description EAN Lamp Socket IP Ballast Louvre Battery Duration Pcs/Pack
4x18 73200TR P 418 A TR 8002219588166 T8 G13 20 B2 A NiCd 4.8V-1.7Ah 2h 2
4x18 73201TR P 418 B TR 8002219588173 T8 G13 20 B2 B NiCd 4.8V-1.7Ah 2h 2
4x18 73202TR P 418 J TR 8002219588180 T8 G13 20 B2 J NiCd 4.8V-1.7Ah 2h 2
4x18 73203TR P 418 X TR 8002219588197 T8 G13 40 B2 X NiCd 4.8V-1.7Ah 2h 2
Emergency version
Emergency version
Watt Ord. N° Description EAN Lamp Socket Ballast IP Louvre Pcs/Pack
4x18 73200 P 418 A 8002219585103 T8 G13 B2 20 A 2
4x18 73201 P 418 B 8002219585110 T8 G13 B2 20 B 2
4x18 73202 P 418 J 8002219585127 T8 G13 B2 20 J 2
4x18 73203 P 418 X 8002219585134 T8 G13 B2 40 X 2
P 418 - Low loss ballast
230V - 50Hz
Watt Ord. N° Description EAN Lamp Socket Ballast IP Louvre Pcs/Pack
4x18 73200RE P 418 RE A 8002219585141 T8 G13 RE 20 A 2
4x18 73201RE P 418 RE B 8002219585158 T8 G13 RE 20 B 2
4x18 73202RE P 418 RE J 8002219585165 T8 G13 RE 20 J 2
4x18 73203RE P 418 RE X 8002219585172 T8 G13 RE 40 X 2
P 418 - Electronic ballast
230V - 50Hz
960°CIP40 IP20
DARKLIGHT T8 650°C
(louvre X only) (low loss ballast excluded)
Watt Ord. N° Description EAN Lamp Socket IP Ballast Louvre Battery Duration Pcs/Pack
4x18 73200RETR P 418 RE A TR 8002219588937 T8 G13 20 RE A NiCd 4,8V-1,7Ah 2h 2 -
4x18 73201RETR P 418 RE B TR 8002219588944 T8 G13 20 RE B NiCd 4,8V-1,7Ah 2h 2 -
4x18 73202RETR P 418 RE J TR 8002219588951 T8 G13 20 RE J NiCd 4,8V-1,7Ah 2h 2 -
4x18 73203RETR P 418 RE X TR 8002219588968 T8 G13 40 RE X NiCd 4,8V-1,7Ah 2h 2 -
20
T8 Surface luminaries
Louvre Description
Louvre A - White coated anti-yellowing aluminim.
White polyester powder coated aluminium sheet louvre with cross fins and flat longitudinalreflectors. Locking clips keep the unit in maintenance position.
Louvre B - Mirror finish low luminance Dark Light EN12464-1 (500cd/m2)
Anti-iridescent, anodized polished alimunium sheet louvre with low luminance level, Darklighttype, longitudinal refelectors and cross fins, double parabolic effect. Locking clips keep theunit in maintenance position.
Louvre J - Satin finish aluminium with rectangular cells.Satin finish aluminium sheet louvre with cross fins and flat longitudinal reflectors,rectangular cells. Ribbed cross fins with micro-mirror effect. Locking clips keep the unitin maintenance position.
Louvre X - Prismatic Methacrylate Sheet.Flat prismatic methacrylate sheet closing panel. Locking clips keep the unit inmaintenance position.
24
Batten
Steel sheet polyester powder coated white RAL 9003body with polycarbonate heads. Polycarbonate lampholder with quick connectors and lamp fall preven-tion collars. Version also available with methacryla-te protection tube.CABLES: Rigid wire internal cables with section of 0.50mm2 and sheath in PVC-HT resistant to 105°C in com-pliance with the IEC 60598-41Directive.2P+Earth terminal board with maximum sections ofwires measuring 2.5 mm2.
CONFORMS TO REGULATION: EN60598-1
T8 Batten
SIZE
WEIGHT
Watt A1* A2* H1 H2 L1 L2 A3 B
18 50 121.5 94.5 94.5 502 426 46 630
36 50 121.5 94.5 94.5 1111 1035 46 1239
58 50 121.5 94.5 94.5 1411 1335 46 1539
Size in mm. *A1= 1x, A2= 2x
LAMPHOLDER
G13 T8 Version with methcrylate tube (lamps not included)
LC version
REFLECTOR ACCESSORY SIZE
Lamp X Y Z
1x 34.1 120.5 62.5
2x 34.1 167 109
Watt Weight
1x18 1.1
2x18 1.2
1x36 1.5
2x36 2.2
1x58 2.1
2x58 3.4
Weight in Kg.
Batten
25
Watt Ord.N° Description EAN Lamp Socket Ballast IP Sing/mult pack
1x18 74100 RGL 18 T8 8002219585240 T8 G13 B2 20D 1/8
1x36 74101 RGL 36 T8 8002219585257 T8 G13 B2 20D 1/8
1x58 74102 RGL 58 T8 8002219585264 T8 G13 B2 20D 1/8
2x18 74103 RGL 218 T8 8002219585271 T8 G13 B2 20D 1/8
2x36 74104 RGL 236 T8 8002219585288 T8 G13 B2 20D 1/8
2x58 74105 RGL 258 T8 8002219585295 T8 G13 B2 20D 1/8
T8 BATTEN
230V - 50Hz
850°C
IP20IP20D T8
Watt Ord.N° Description EAN Lamp Socket Ballast IP Sing/mult pack
1x18 74200 RGL 18 TB T8 8002219585240 T8 G13 B2 20D 1/8
1x36 74201 RGL 36 TB T8 8002219585257 T8 G13 B2 20D 1/8
1x58 74202 RGL 58 TB T8 8002219585264 T8 G13 B2 20D 1/8
2x18 74203 RGL 218 TB T8 8002219585271 T8 G13 B2 20D 1/8
2x36 74204 RGL 236 TB T8 8002219585288 T8 G13 B2 20D 1/8
2x58 74205 RGL 258 TB T8 8002219585295 T8 G13 B2 20D 1/8
Article Ord.N° Description EAN Sing/mult pack
1x18 74900 RIFLET 18 T8 8002219585363 1/8
1x36 74901 RIFLET 36 T8 8002219585370 1/8
1x58 74902 RIFLET 58 T8 8002219585387 1/8
2x18 74903 RIFLET 218 T8 8002219586704 1/8
2x36 74904 RIFLET 236 T8 8002219586711 1/8
2x58 74905 RIFLET 258 T8 8002219586728 1/8
TB - with methacrylate protection tube
LC
ACCESSORIES to be ordered seperately
Reflector in white RAL 9003 polyester powder coated sheet steel
Watt Ord.N° Description EAN Lamp Socket Ballast IP Sing/mult pack
1x18 74106 RGL 18 LC T8 8002219588975 T8 G13 B2 20D 1/8 -
1x36 74107 RGL 36 LC T8 8002219588982 T8 G13 B2 20D 1/8 -
1x58 74108 RGL 58 LC T8 8002219588999 T8 G13 B2 20D 1/8 -
2x18 74109 RGL 218 LC T8 8002219589002 T8 G13 B2 20D 1/8 -
2x36 74110 RGL 236 LC T8 8002219589019 T8 G13 B2 20D 1/8 -
2x58 74111 RGL 258 LC T8 8002219589026 T8 G13 B2 20D 1/8 -
26
Batten
Ceiling and wall installation in direct contact with flam-mable surfaces (furniture also) and suspended instal-lation.BODY: Self extinguishing polycarbonate body. PMMAdull diffuser.Connection to power network using connectors on thehead. Possible continuous row connection of up to12 units thanks to the integral feed-through systemand of the 15 cm connection cable and adapter pro-vided. On/off switch.Various installation possibilities thanks to the four typesof brackets provided.Colour: white RAL2003
CONFORMS TO REGULATION: EN60598-1
T5 Batten (6W excluded- code 74000)
LAMPHOLDER SOCKET
G5 Fixture supplied with T5 4000°K tubes
EQUIPMENT
Fixture supplied with brackets and cables
ACCESSORIES PROVIDED
SIZE
Lamp A B C
6 269 28 43
8 345 28 43
14 606 28 43
21 905 28 43
28 1205 28 43
35 1505 28 43
Size in mm
Italy IMQ certified product
Batten
27
Watt Ord.N° Description EAN Lamp Socket Ballast IP Sing/mult pack
6 74000 RGL 6 T5 8002219585189 T5 G5 RE 30 1/30
8 74001 RGL 8 T5 8002219585196 T5 G5 RE 30 1/30
14 74002 RGL 14 T5 8002219585202 T5 G5 RE 30 1/30
21 74003 RGL 21 T5 8002219585219 T5 G5 RE 30 1/20
28 74004 RGL 28 T5 8002219585226 T5 G5 RE 30 1/20
35 74005 RGL 35 T5 8002219585233 T5 G5 RE 30 1/20
T5 BATTEN - Electronic ballast
230V - 50Hz
650°CT5IP30 M M
30
Downlight
Recessed fitting light for direct contact with flammable surfaces.Louvre: Polyester powder coated steel sheet, white RAL 9003 withanti-yellowing treatment.Ballast housing : made of self-extinguishing Nylon66 Diffuser glass with anti-glare screen. Fixed to light frame withtilting movement and shear pin for maintenance.Reflectors: Anodized, polished aluminiumCables: Internal cables insulated with fibreglass.2P (SD unit) or 2P+Earth (HIDD, HD units) terminal board, withmaximum sections of wires measuring 2.5 mm2 .
Available also in Emergency version (TR).
CONFORMS TO REGULATIONS: EN60598-1 and EN60598-2-2
SD - HIDD - HD
SIZE AND WEIGHT
LAMPHOLDER SOCKET
G24d-1/G24q-1 G24d-3/G24q-3G24d-2/G24q-2 Lamps supplied with 4000°K tube (excluding71402)
Power supply unit B2: 171x79x56
Power supply unit RE: 210x112x64
EQUIPMENT
Italy IMQ certified product.
(Only for SD light)
Downlight
31
Watt Ord.N° Description EAN Lamp Socket Ballast IP Sing/mult pack
1x13 71000 SD 113 8002219585882 TCD G24d-1 B2 20D 1/8
1x18 71001 SD 118 8002219585899 TCD G24d-2 B2 20D 1/8
1x26 71002 SD 126 8002219585905 TCD G24d-3 B2 20D 1/8
2x13 71003 SD 213 8002219585912 TCD G24d-1 B2 20D 1/8
2x18 71004 SD 218 8002219585929 TCD G24d-2 B2 20D 1/8
2x26 71005 SD 226 8002219585936 TCD G24d-3 B2 20D 1/8
SD - Low loss ballast
Watt Ord.N° Description EAN Lamp Socket Ballast IP Sing/mult Pack
1x13 71006 SD 113 RE 8002219585943 TCE G24q-1 RE 20D 1/8
1x18 71007 SD 118 RE 8002219585950 TCE G24q-2 RE 20D 1/8
1x26 71008 SD 126 RE 8002219585967 TCE G24q-3 RE 20D 1/8
2x13 71009 SD 213 RE 8002219585974 TCE G24q-1 RE 20D 1/8
2x18 71010 SD 218 RE 8002219585981 TCE G24q-2 RE 20D 1/8
2x26 71011 SD 226 RE 8002219585998 TCE G24q-3 RE 20D 1/8
SD - Electronic ballast
230V - 50Hz
230V - 50Hz
850°CIP20D
Watt Ord.N° Description EAN Lamp Socket Ballast IP Sing/mult Pack
1x70 71400 HIDD 8002219586742 MH RX7s HPF 20D 1/6
1x150 71401 HIDD 8002219586759 MH RX7s HPF 20D 1/6
250 Max 71402 HD 8002219586766 Halogen R7s Network 20D 1/6
HIDD - HD - Discharge and halogen
Watt Ord.N° Description EAN Lamp Socket IP Battery Duration Sing/mult pack
1x13 71006TR SD TR 113 RE 8002219585943 TCE G24q-1 20D NiCd 4.8V-1.7Ah 1h 1/6
1x18 71007TR SD TR 118 RE 8002219585950 TCE G24q-2 20D NiCd 4.8V-1.7Ah 1h 1/6
1x26 71008TR SD TR 126 RE 8002219585967 TCE G24q-3 20D NiCd 4.8V-1.7Ah 1h 1/6
2x13 71009TR SD TR 213 RE 8002219585974 TCE G24q-1 20D NiCd 4.8V-1.7Ah 1h 1/6
2x18 71010TR SD TR 218 RE 8002219585981 TCE G24q-2 20D NiCd 4.8V-1.7Ah 1h 1/6
2x26 71011TR SD TR 226 RE 8002219585998 TCE G24q-3 20D NiCd 4.8V-1.7Ah 1h 1/6
SD TR - Electronic ballast- Emergency version
230V - 50Hz
230V - 50Hz
(SD Lights) (HD excluded)
32
Downlight
Recessed installation in plasterboard or strip ceiling.Louvre: Polyester powder coated steel sheet, whiteRAL9003 with anti-yellowing treatment.Diffuser with toughened glass for protection and UV rayfilter.Removable frame for maintenance purposes. Reflector: Satin finished anodized aluminium. Cables: Flexible internal cables with silicone insulation.2P+Earth terminal block with maximum sections ofwires measuring 2.5 mm2 .
CONFORMS TO REGULATIONS: EN60598-1 and EN60598-2-2
Adjustable rectangular
WEIGHT AND SIZE
LAMPHOLDER SOCKET
RX7s Fixture supplied with lamp (71602 excluded )
EQUIPMENT
Downlight
33
960°CIP20
Watt Ord.N° Description EAN Lamp Socket Ballast IP Sing/mult packs
70 71600 RT-OR 70 8002219587114 MH RX7s HPF 20 1/6
150 71601 RT-OR 150 8002219587121 MH RX7s HPF 20 1/6
250 Max 71602 RT-OR 250 8002219587138 Halogen* R7s no (230V) 20 1/6
ADJUSTABLE RECTANGULAR
230V - 50Hz * To be ordered seperately
(Halogens excluded)
34
Downlight
Adjustable round downlight with a 360° swinging andtilting louvre with inclination up to 60°.LOUVRE: Polyester powder coated die-cast aluminium,white RAL9003 with anti-yellowing treatment.Diffuser with toughened glass for protection and UV filter.Satin finished central area to reduce direct anti-glare. The frame, the diffuser and the reflector are removedtogether for maintenance.Reflector: Satin finished anodized aluminium. Cables: Flexible internal cables insulated with siliconeand fibreglass heat protection.2P+Earth terminal block with maximum sections ofwires measuring 2.5 mm2 .
Installation: recessed strip ceiling or plasterboard.
CONFORMS TO REGULATIONS: EN60598-1 and EN60598-2-2
Adjustable round
SIZE AND WEIGHT
LAMPHOLDER SOCKET
G12
Downlight
35
Watt Ord.N° Description EAN Lamp Socket Ballast IP Sing/mult packs
70 71700 TD-OR 8002219587145 MH G12 HPF 20 1/6
150 71701 TD-OR 8002219587152 MH G12 HPF 20 1/6
500 Max 71702 TD-OR 8002219587169 Halogen G12 no (230V) 20 1/6
ADJUSTABLE ROUND
230V - 50Hz Lamps to be ordered separately
960°CIP20
38
Wall Light
Waterproof fixture for ceiling and wall installation.BODY: Self-extinguishing, thermoplastic material withtough nylon frame. Available in white RAL 1013 andblack 9017.Dull diffuser for a homogeneous light distribution.Removable frame for maintenance. Reflector: Satin finished anodized aluminium.2P+Earth terminal board with maximum sections of wiresmeasuring 2.5 mm2 .
Units are supplied with lamps(except 75002 and 75102)
CONFORMS TO REGULATION: EN60598-1
WL 315
SIZE AND WEIGHT
LAMPHOLDER SOCKET
GR8 G23 G24d-2 G24d-3 E27
Watt Ø Prof.
2x9 315 88
2x18 315 88
75max 315 88
1x21 315 88
1x26 315 88
Size in mm
Wall Light
39
650°CIP65
Watt Ord.N° Description EAN Lamp Socket Ballast IP Sing/mult packs
2X9 75000 WL315 2X9 B 8002219585394 S G23 - 65 1/8
2X18 75001 WL315 2X18 B 8002219585400 D/E G24d-2 - 65 1/8
75 Max 75002 WL315 E27 B 8002219585417 -* E27 no (230V) 65 1/8
1X21 75003 WL315 1X21 B 8002219585424 TC DD GR8 - 65 1/8
1X26 75004 WL315 1X26 B 8002219585431 D G24d-3 - 65 1/8
WL 315 - white colour body
230V - 50Hz *Lamps to be ordered separately
Watt Ord.N° Description EAN Lamp Socket Ballast IP Sing/mult packs
2X9 75100 WL315 2X9 N 8002219585448 S G23 - 65 1/8
2X18 75101 WL315 2X18 N 8002219585455 D/E G24d-2 - 65 1/8
75 Max 75102 WL315 E27 N 8002219585462 -* E27 no (230V) 65 1/8
1X21 75103 WL315 1X21 N 8002219585479 TC DD GR8 - 65 1/8
1X26 75104 WL315 1X26 N 8002219585486 D G24d-3 - 65 1/8
WL 315 - black colour body
230V - 50Hz *Lamps to be ordered separately
42
Parts
Starters for high pressure discharge lights. Two or three pole connection terminals.Aluminum body with M8 fitting screws and nut included. Operation temperature from -40°C to +105°C
CONFORMS TO REGULATIONS: IEC-EN61437-1, 60927,61547. VDE -
Starters for discharge lamps
Watt Ord.N° EAN Size weight each in g Sing/mult packs
35~400 80200 8002219585738 Ø35x53 100 10/100
500~1000 80201 8002219585745 Ø50x72 - 10/100
1000~2000 80202 8002219585752 Ø50x72 - 10/100
STARTERS FOR METAL HALIDE - two poles 1KVolt
Watt Ord.N° EAN Size weight each in g Sing/mult packs
35~400 80203 8002219585769 Ø35x63 140 10/100
500~1000 80204 8002219585776 Ø40x72 - 10/100
1000~2000 80205 8002219585783 Ø50x72 - 10/100
STARTERS FOR HQI/SAP - three poles 4.5KVolt
VDE
220/240V 50/60Hz
220/240V 50/60Hz
Parts
43
Re-phasing capacitors for high pressure discharge lights. Single core connection cables and fuses included.Aluminum body with M8 fitting screws and nut included. Operation temperature from -40°C to +105°C
CONFORMS TO REGULATIONS: IEC-EN 61048, 61049 / TÜV Approved
Capacitors
Re-phasing capacitors for fluorescent lamps. Single core connection cables and fuses included.Plastic body with small fitting plate. Operation temperature from -40°C to +105°CCONFORMS TO REGULATIONS: IEC-EN 61048, 61049 /TÜV Approved
VDE
Type Ord.N° EAN Power Wire length Weight each Temperature Size in mm Sing/mult packs
12µF 80300 8002219585790 12µF 370mm 60 85°C ø35x62 10/100
18µF 80301 8002219585806 18µF 370mm 70 85°C ø40x72 10/100
20µF 80302 8002219585813 20µF 370mm 75 85°C ø40x72 10/100
25µF 80303 8002219585820 25µF 370mm 85 105°C ø40x100 10/100
32µF 80304 8002219585837 32µF 370mm 105 105°C ø42x105 10/100
50µF 80305 8002219585844 50µF 370mm 165 105°C ø50x105 10/100
CAPACITORS FOR METAL HALIDE
220/240V 50/60Hz
220/240V 50/60Hz
Type Ord.N° EAN Power Wire length Weight each Temperature Size in mm Sing/mult packs
4µF 80306 8002219585851 4µF 240mm 30 85°C ø28x55 10/100
8µF 80307 8002219585868 8µF 240mm 40 85°C ø28x70 10/100
12µF 80308 8002219585875 12µF 240mm 50 85°C ø28x85 10/100
CAPACITORS FOR FLUORESCENT LAMPS
44
Parts
Electromagnetic unit for discharge and fluorescent lamps. Two poles terminal. Metal body with fitting plate.
CONFORMS TO REGULATIONS: IEC-EN 61437-1, 61437-2-9, 60923 /TÜV Approved
Tw: 130°C - Delta T: 130°C
Tw (for 18 and 36w): 120°C - Tw (for 58w): 130°C - Delta T: 60°C
Ballast
Watt Ord.N° EAN Curent A Lamp Weight each in g Pack
70 80000 8002219585646 0.98 HQI-SAP 1200 4
150 80001 8002219585653 1.8 HQI-SAP 2000 4
250 80002 8002219585660 2.15 IM 2400 4
250 80003 8002219585677 3.0 HQI-SAP 3000 8
400 80004 8002219585684 4.4 HQI-SAP 4100 8
400 80005 8002219585691 3.25 IM 3000 8
POWER SUPPLY UNITS FOR DISCHARGE LAMPS
Watt Ord.N° EAN Type Lamp Weight each in g sing/mult Packs
18 80100 8002219585707 B2 Fluorescent 560 4/16
36 80101 8002219585714 B2 Fluorescent 560 4/16
58 80102 8002219585721 B2 Fluorescent 1015 4/16
LOW LOSS POWER SUPPLY UNITS FOR FLUORESCENT LAMPS
230V - 50/60Hz
230V - 50/60Hz
Italy IMQ certified product
46
Index by reference number
12020 7
70000 11
70000RE 11
70000TR 11
70001 11
70001RE 11
70001TR 11
70002 11
70002RE 11
70002TR 11
70003 11
70003RE 11
70003TR 11
70200 12
70200RE 12
70200TR 12
70201 12
70201RE 12
70201TR 12
70202 12
70202RE 12
70202TR 12
70203 12
70203RE 12
70203TR 12
71000 31
71001 31
71002 31
71003 31
71004 31
71005 31
71006 31
71006TR 31
71007 31
71007TR 31
71008 31
71008TR 31
71009 31
71009TR 31
71010 31
71010TR 31
71011 31
71011TR 31
71400 31
71401 31
71402 31
71600 33
71601 33
71602 33
71700 35
71701 35
71702 35
73000 17
73000RE 17
73000TR 17
73001 17
73001RE 17
73001TR 17
73002 17
73002RE 17
73002TR 17
73003 17
73003RE 17
73003TR 17
73100 18
73100RE 18
73100TR 18
73101 18
73101RE 18
73101TR 18
73102 18
73102RE 18
73102TR 18
73103 18
73103RE 18
73103TR 18
73200 19
73200RE 19
73200TR 19
73201 19
73201RE 19
73201TR 19
73202 19
73202RE 19
73202TR 19
73203 19
73203RE 19
73203TR 19
74000 27
74001 27
74002 27
74003 27
74004 27
74005 27
74100 25
74101 25
74102 25
74103 25
74104 25
74105 25
74200 25
74201 25
74202 25
74203 25
74204 25
74205 25
74900 25
74901 25
74902 25
74903 25
74904 25
74905 25
75000 39
75001 39
75002 39
75003 39
75004 39
75100 39
75101 39
75102 39
75103 39
75104 39
76000 7
76000LA 7
76001 7
76001LA 7
76100 7
76100LA 7
76101 7
76101LA 7
77000 5
77001 5
ORDER PAGECODE
ORDER PAGECODE
ORDER PAGECODE
ORDER PAGECODE
Index by reference number
47
ORDER PAGECODE
ORDER PAGECODE
ORDER PAGECODE
ORDER PAGECODE
77002 5
77003 5
77004 5
77005 5
77006 5
77007 5
77008 5
77009 5
77010 5
77011 5
77012 5
77013 5
77014 5
77015 5
77900 5
77901 5
80000 44
80001 44
80002 44
80003 44
80004 44
80005 44
80100 44
80101 44
80102 44
80200 42
80201 42
80202 42
80203 42
80204 42
80205 42
80300 43
80301 43
80302 43
80303 43
80304 43
80305 43
80306 43
80307 43
80308 43
48
Terms and conditions of sale
1. ORDERS - LIMITS OF AGREEMENTAll orders made must be in writing. Once an order has been confirmed it is irreversible. The Seller reserves
the right to carry out an order partially or even cancel the residual order, if the economic situation of the buyer
changes.
All collaboration, orders, commission and agreements are fully understood by written or verbal confirmation
from the Seller or however, by providing an invoice and/or delivery of goods ordered. There is a minimum
order limit.
2. VARIATIONS AND MODIFICATIONSAfter placing an order, all modifications or additions will be validated and become efficient only when the Seller
has provided the buyer with written confirmation. The written or varied confirmation from the Seller will void
any other document in possession.
The Buyer who does not wish to respect the conditions relating to the order, must inform the Seller within 20
days from the confirmation date otherwise, the variation will have been fully accepted.
3. ACCEPTANCEThe Seller cannot be held responsible for the non-acceptance of an order as well as for late or no delivery
of goods ordered. Acceptance and delivery of orders are subject to availability as well as circumstances
which could influence the availability or the delivery of them.
4. DELIVERYDelivery times stated by the Seller are approximate.
Delivery times expressed in days, take into consideration working days only.
Any changes made to delivery times requested by the Buyer must have written confirmation from the Seller.
The Seller will not be liable for compensation for damage and/or refund of any type including interest as a
result of delays in delivery such as total or partial interruption and/or suspension, even if not caused by force
majeure or unforeseeable circumstances. The Buyer can cancel the order if the Seller does not deliver goods
within 30 days after which the Buyer has sent a letter by registered post with acknowledgement of receipt.
5. FORCE MAJEUREThe Seller shall not be liable for any delay or failure in its performance caused by or resulting from acts of
God, fire, flood, accident, riot, war, government intervention, embargoes, strikes, labour difficulties, equipment
failures and any other causes beyond the control of the Seller. In all cases, as for the hypothesis of unfore-
seeable circumstances, the Seller reserves the right to suspend and/or delay the delivery of products as well
as voiding the order even if it has been confirmed. The Buyer will have no right in claiming compensation for
damage and/or refund of any type therein including direct, indirect or consequential.
6. SHIPMENTThe Buyer is responsible for risks and dangers of goods being shipped even if carriage has been paid and
/or is by use of Seller vehicles. The Seller will not be responsible for any breakages and/or mishandling of goods.
Goods will be dispatched from Sellers seat in Monteveglio (Bologna).
The Buyer is responsible for transport fees. The Seller does not accept returns.
7. CLAIMS- REPLACEMENT OF GOODSOn receiving goods, the Buyer must check the state and quantity received with that stated on the dispatch
note. Any claims relating to quality, quantity or type of goods must be in writing and sent within 8 days of
receiving goods. After this time, except for conditions covered by goods warranty, no claim can be made
relating to quality, substance or general conditions of the goods. The Buyer cannot return the goods without
written confirmation from the Seller and must not delay and/or suspend total or partial payment of the
invoice, even in cases of claims. If a claim is considered valid by the Seller and has been made within war-
ranty terms stated on instruction leaflet accompanying the individual products, the Seller is limited to
replacing the faulty product using the same shipment method as with the original product. The Buyer can-
not cancel the order and cannot claim compenastion for damage and/or fees. Rights to replacement are
voided if the product is not preserved with care, kept at the Sellers disposition or returned immediately to the
place determined by the Seller.
8. COSTThe prices indicated in the catalogue are not binding for the Seller and as a consequence he reserves the right
to modify the price until delivery has been made. Prices are net of VAT and other taxes.
9. PAYMENTAll payments must be carried out within the terms and modality indicated by the Seller to their seat in
Monteveglio (Bologna) or to the person with written authorisation for receiving payment on the Sellers behalf.
In case of delayed payment, the Buyer will have to pay the Seller interest from the expiry date to the date
of payment carried out, equal to the "prime-rate" enforced from time to time (determined by the Italian ban-
king Associat ion-
ABI) plus 5 (five) points, unless compensation fees are higher. If the Buyer does not comply with the payment
terms stated, the Seller can cancel the order immediately or suspend the delivery of goods already ordered
without informing the Buyer. The Seller reserves the right to request immediate payment of the total credit
due and take action for any compensation for damages.
10. RETENTION OF TITLETitle to the goods shall pass to the Buyer only when the Buyer has carried out full payment of total price.
The Buyer is obliged to inform third parties of the retention of title agreement as well as protect the rights of
the Seller.
11. JURISDICTIONFor any controversy or protest relating to the interpretation, validity or carrying out of orders or in relation to
the contract and general conditions of sale, the Bologna Law Court is exclusively competent.
Elplast products are distributed by Beghelli and manufactured according to the trade rules using safe
materials conforming to regulations 186/68 and 791/77 and do not compromise the safety of people, animals
or objects, if installed and used for their correct purpose only. Products relating to the CEE Directives (Directive
“EMC” 89/336/CEE - enforced the Legislative Decree 476/92 - modified by the 93/68/CEE Directive and “BT”
73/23/CEE Directive - enforced by law 791/77 - modified by the 93/68/CEE Directive) are conform with the
essential requisites they contain. The CE Marking positioned on the goods and/or packaging and/or any user
warnings which accompany the goods indicate the presumed Declaration of Conformity to Directives listed above.
Beghelli preserves a copy of the documentation, which indicates that the product has been examined and con-
forms to regulations, on file in their technical archive. This document includes initial projects, test reports,
drawings and a list of parts and is available for inspection by the competent authority.
The contents of this catalogue are subject to variation without prior notification. All products included are
covered by the Beghelli warranty according to laws in force except for different indications in the warranty
of each individual product.
© C
op
yrig
ht
03/2
008