catalogo kitchen walker.pdf

Please check prices with us before quoting or accepting orders All prices are ex-works, carriage extra and exclusive of VAT 1

Machine Tools

SECTIONS 1 - 5 pages

SECTION 1Kitchen-Walker Bench & Pillar Drills, Radial Drills 4 - 6

SECTION 2Astra Surface Grinders, Double Ended Grinders, Brierley Grinders 8 - 10

SECTION 3Astra Universal and Turret Milling Machines and Lathes 12 - 18

SECTION 4Astra Band Saws (Standard, Semi-Automatic)Thomas Metal Cutting Off Machines (Standard, Semi-Automatic, Automatic & CNC) 20 - 34

SECTION 5Slotting Machines, Shaping Machines, Dividing Heads,Indexing Units, Rotary Tables, Compound Tables, Magnetic Chucks, Magnetic Bases, Lathe Centres, VicesCoolant Equipment, Tapping Attachments, Feed Motors 36 - 50

CONTENTS

S c o t U r q u h a r t 3Please check prices with us before quoting or accepting orders All prices are ex-works, carriage extra and exclusive of VAT2

1. Conditions. All quotations and tenders are submitted and all orders and contracts areaccepted subject to the following conditions to the exclusion of all others. In the event of anyconflict or inconsistencies between these conditions and the terms or conditions on a Buyersenquiry, order or acceptance, these conditions shall prevail unless otherwise expresslyagreed and confirmed by the Seller in writing.2. Quotations. All quotations are valid for 30 days unless otherwise stated on the quotation.All quotations are subject to confirmation on receipt of order and items from stock are offeredsubject to being unsold when the order is received. Under no circumstances can the Selleraccept the cancellation of any orders received against quotations for non-standard itemsmanufactured to the Buyers instructions. The Seller reserves the right to refuse an order.The Seller reserves the right to amend any error or omission in any quotation. A minimum order value will apply at time of placing order.3. Acceptance of Quotations. The acceptance of the Sellers estimate or tender must beaccompanied or immediately followed by written information to enable the Seller to proceedwith the order forthwith and a remittance for the amount of any deposit stipulated. TheSeller reserves the right not to commence work until official confirmation has been received.4. Trade Discounts. All trade discounts are given by the Seller only on the strictunderstanding that the goods are for resale by the Buyer. The Seller reserves the right torender an invoice for the additional sum represented by such trade discount should the Sellerdiscover at any time, before or after delivery, that the goods are for the Buyers own use. Notrade discount granted by the Seller qualifies to be deducted from the gross amount due ifthe Buyer does not make payment within the agreed payment terms.5. Terms of Payment. Terms of payment are 30 days from date of invoice unless otherwisestated, but the Seller reserves the right at any time before delivery to enquire as to theBuyers credit standing and to demand cash before delivery if the Seller sees fit. The Sellerwill require cheques to be cleared prior to despatching goods. Other terms of payment willbe as quoted at time of enquiry.All machines are quoted and are invoiced on the basis of payment being made in full clearedfunds prior to despatch unless the Seller agrees otherwise in writing.In the event of payment not being received by the Seller within the agreed terms of payment,the Seller reserves the right to charge interest on all outstanding amounts at the rate of 3%per year above the National Westminster Bank base rate accruing daily.6. New Account. Any Buyer with whom the Seller has not previously done business, and whowishes to open a credit account, should provide two first class trade references and Bankersreference, and in default thereof our terms are cash against pro-forma invoice.7. Prices. Unless specified by the Seller in the quotation or tender, the price quoted is ex-works. If the Seller agrees to effect delivery the method of transport shall be at the Sellersoption. Delivery and distribution charges shall be an extra to the contract and shallaccordingly be paid by the Buyer to the Seller.8. Price Fluctuation. The Seller reserves the right to invoice all goods at the price prevailingat the date of despatch in accordance with our current price list or at the prices quoted plusan addition to cover increased production costs from the date of the order to the date ofdespatch.9. Extra Cost. In the event of suspension of the work by the Buyers instructions or lack ofinstructions, the contract price may be increased to cover any extra expense thereby incurredby the Seller.10. Cancellations by the Buyer. Orders shall not be cancelled or amended except with theSellers consent and upon terms which indemnify the Seller against loss. A handling chargeof 15% plus VAT and carriage will be levied where goods are returned for any reason otherthan warranty claims.11. Limits of Contract. Any goods or accessories supplied, or work carried out beyond thescope of any contract are to be treated as extras to the contract and will be charged atcurrent prevailing prices and rates.12. Specifications, Drawings etc. Any specifications, data, photographs, drawings,descriptions and illustrations contained in the Sellers catalogues and descriptive literature,forming part of the Sellers general product information or submitted with the Sellersestimate or tender are approximate only and are intended merely to present a general ideaof the goods described therein and none of these shall form part of the contract. The Sellerreserves the right in executing orders to include at our option uncatalogued improvements.All drawings and technical descriptions prepared by the Seller shall remain the Sellersproperty returnable on demand and the copyright in them remains vested in the Seller andshall not be infringed by copying, reproduction or disclosure without written consent from theSeller.13. Performance and Capability. Any performance facts or figures given by the Seller arebased upon the Sellers experience and are such as the Seller expects to obtain on tests. TheSeller accepts no liability if these are not obtained unless the Seller specifically agrees themin writing. The Buyer assumes liability for the capacity and performance of the goods beingsufficient and suitable for his purpose, and for his premises being suited to the installationand operation of the plant, machinery or equipment. The material composition of allstandard items is available on request if not already outlined in our descriptive literature.The suitability of the application of any product for the Buyers own purpose is establishedat the risk of the Buyer.14. Despatch and Delivery. The time for delivery shall be reckoned from the date of receiptby the Seller of complete instructions, approval of drawings and any required deposit etc.necessary for the execution of the work. All reasonable endeavours will be made to despatchor complete within the time stated, but the Seller shall not be liable for any loss or damagedue to late delivery, however caused.The Seller must be advised within 3 days of the date of invoice if delivery of the goods hasnot been effected. The Seller will be unable to assist with, and accepts no liability for lossin respect of any claim after this period. 15. Acceptance of Goods. Every care is taken but it must clearly be understood that theSellers responsibility ceases with delivery to carriers, ex the Sellers works, after which noliability attaches to the Seller in respect of loss, damage or delay, however arising, which

may subsequently occur. In the event of any evidence of damage to goods, the carriersdelivery note should not be signed and acceptance of receipt of the consignment should berefused. A signature for receipt must not be given unless all items in the consignment havebeen inspected thoroughly. The Seller will be unable to assist with any claim arising wheregoods have been accepted and signed for in good condition. In any case, any query relatingto the condition of goods received must be referred to the Seller within 48 hours of receipt ofthe consignment.16. Title. Until payment is made in full by the Buyer the goods shall remain in the ownershipof and title shall remain vested in the Seller but the risk therein and all liability to thirdparties in respect of the goods shall pass to the Buyer when loading of the goods onto thecarriers vehicle at the Sellers premises is complete.In the event of failure by the Buyer to make full payment for the goods, the Seller shall beentitled to claim the proceeds of sale of any such goods sold by the Buyer prior to fullpayment being made to the Seller for all of the goods. A Buyer agrees by taking delivery ofthe goods to store the goods in such a way the items are clearly identifiable as the propertyof the Seller until full payment has been made to the Seller. 17. Consignment or Sale or Return. Goods supplied on consignment or on a sale or returnbasis will be held at the Buyers risk and the Buyer accepts full responsibility for theirinsurance and for any loss. Should such goods be returned to the Seller, the delivery chargeswill be borne by the Buyer.18. Custody of Goods. The Buyer is responsible for safe custody and storage of or damage(however caused) to or theft of any goods, plant, material and tools used by the Seller forinstallation purposes from the time such items are delivered to the site and notwithstandingthat property in the goods, etc. may not pass to the Buyer. 19. Default. Should default be made by the Buyer in paying any sum due under any order asand when it becomes due, the Seller shall have the right either to suspend all furtherdeliveries until the default be made good or to cancel the order so far as any goods remainto be delivered thereunder.20. Conditions of Warranties. Save as hereinafter provided no condition or warranty isexpressed or is to be implied as to quality or fitness for any purpose or as to correspondencewith description or sample or as to merchantableness either with regard to the goods to besupplied or as to any parts or material in their manufacture.21. Guarantee. All goods are guaranteed against defective workmanship and material for aperiod of 6 months from date of invoice, subject to it being used on a normal single shiftbasis only, provided the Sellers liability in respect of any defect in any part of the goodssupplied proved to be defective is limited to making good by replacement or repair at theSellers option but free of charge and provided always that such defective part be returnedto the Seller. The Seller accepts no responsibility to consequential damages of any kind orfor any breakage or replacement necessary when due to wear or by reason of any negligenceor fault of the Buyers operator or any other person. In case of equipment or parts thereof notof the Sellers manufacture, whether incorporated in the Sellers machines or not, the Buyeris entitled only to such benefits as the Seller receives under any guarantee given to the Sellerin respect thereof. This guarantee shall not apply to any second-hand machines or partsthereof, or consumable items.22. Force Majeure. The Seller will not be liable for any delay in performing or failure toperform any of its obligations under any contract for the supply of goods or services wherethe delay is due to any cause outside its reasonable control. Such delay or failure will notconstitute a breach of the contract and the time for performance of the affected obligationshall be extended by such period as shall be reasonable.23. Insolvency of Buyer. If the Buyer defaults in paying any sum due or if any distress orexecution is levied upon the Buyer, its property or assets, or if the Buyer makes or offers tomake any composition with creditors or commits any act of insolvency or act which would bean act of bankruptcy if committed by an individual, or if a petition be presented for aReceiving Order in the case of an individual or liquidation in the case of a company or aReceiver or Administrator is appointed to the Buyer, the Seller is entitled at any timethereafter to determine any contract without derogation the Sellers right to recover moneydue and damages.In addition in such circumstances the Seller shall have the right to enter without obstructiononto the Buyers premises to identify and uplift and remove any goods for which payment hasnot been made in full by the Buyer to the Seller.24. Exclusions and Liability. The Seller shall not be liable in respect of claims for damagesto the Buyer or third parties, either directly or indirectly, resulting from defects in design,materials or workmanship. The Seller shall have no liability for any indirect or consequentiallosses or expenses suffered by the Buyer however caused. 25. Health and Safety. All goods are sold and delivered on the strict understanding that theBuyer will not use the goods until they are satisfied that the goods meet the Health andSafety regulations required by law.26. Severability. If any of these Conditions or any part is held to be invalid for any purpose,it shall for that purpose be deemed to have been omitted but shall not prejudice theeffectiveness of the rest of these Conditions.27. Legal Construction. The contract shall in all respects be construed and operated as anEnglish contract and shall be governed by English law.

Scot Urquhart LtdUnit 12, Allcut Building, Triangle Business Park, Quilters Way,

Wendover, Buckinghamshire, HP22 5BL England.Tel: (Int +44) 01296 613000 Fax: (Int +44) 01296 614000

Registered Offices: St Pauls Trading Estate, Huddersfield Road, Stalybridge, Cheshire SK15 2QF England

Tel: 0161 303 7394 Fax: 0161 303 1110

Conditions of SaleScot Urquhart Ltd incorporating Kitchen-Walker

herein called the sellerMachine Tools

SECTION 1

Bench & Pillar Drills, Radial Drills

UBD16

UBD12

S c o t U r q u h a r t 5S c o t U r q u h a r t4

SPECIFICATIONS UBD.12 UBD.16 UPD.16

Spindle taper B16 MT 2 MT 2Drilling capacity mm 16 20 20Chuck capacity mm 16 16 16Spindle travel mm 50 85 85Distance from spindle to column mm 177 168.5 168.5Column diameter mm 48 73 73Table size mm 182 x 210 274 x 274 274 x 274Base size mm 306 x 186 463 x 274 346 x 210Overall height mm 740 1,000 1,619Motor 340W,230V AC 600W,230V AC 600W,230V ACSpeeds 5 12 12Speed Range rev/min 515,915,1430

1950,2580Net/gross weight kg 23 / 26 63 / 66 70 / 73Packaging size cu.ft 2.05 4.47 7

210,280,320,420,500,540,8301250,1350,1580,2180,2580

SPECIFICATIONS KW25G KWP25G

Drilling Diameter in Iron 35mm 35mmDrilling Diameter in Steel 25mm 25mmMain Motor Power 0.75/1hp 0.75/1hpTaper of Spindle MT3 MT3Spindle Speeds 100-2900rpm 100-2900rpmNumber of Speeds 8 8Feed Rates n/a n/aNumber of Feed Rates n/a n/aSpindle Quill Travel 140mm 140mmDrill Box Travel 455mm 240mmSurface of Table 310x275mmT Slot Size 14mm 14mmDistance between T-Slot Centres 180mm 200mmDistance from Spindle to Table (max) n/a 600mmThroat (spindle centre to column) 225mm 225mmCoolant Flow n/a n/aNet Weight 170kgs 270kgsOverall Dimensions (LxWxH) 580x470x1000mm 640x470x1670mmSpindle to Base Plate (max) 470mm 1075mmBase Work Plate Dimensions 300x305mm 475x400mmPower Supply 415v 50Hz 415v 50Hz

KW25GKWP25G

Bench & Pillar Drills Astra Drilling Machines

SPECIFICATIONS PR40 PR50 PR50A PR60 PR80+

Max Driling Diameter (Steel) 25mm 35mm 35mm 40mm 50mmMax Tapping Diameter (Steel) M18 M22 M22 M24 M30Max Milling Cutter Diameter N/a 80mm 80mm 80mm 80mmThroat 240mm 340mm 340mm 360mm 360mmMax Distance Spindle Nose to Table 675mm 580mm 580mm 590mm 550mmMax Distance Spindle Nose to Base 1140mm 1195mm 1195mm 1175mm 1170mmSpindle Travel 110mm 190mm 190mm 200mm 200mmSpindle Taper MT3 MT4 MT4 MT4 MT4Spindle Speed Range 125-2825rpm 75-2020rpm 75-2020rpm 52-1400rpm 50-2200rpmNumber of Spindle Speeds 6 12 12 n/a n/aNos of Feeds n/a 3 3 4 6Feed Rates/Range n/a 0.1,0.2,0.3mm/r 0.1,0.2,0.3mm/r 0.1-0.4mm/r 0.08-0.5mm/rMax Travel of Worktable 440mm 430mm 430mm 410mm 410mmTable Swivel n/a 45 45 45 45Table Work Area 400x330mm 540x440mm 540x440mm 580x460mm 580x460mmBase Work Area 310x320mm 415x400mm 415x400mm 445x435mm 445x435mmNumber of T Slots Table 2 2 2 3 3Size of T Slots Table 14mm 14mm 14mm 14mm 14mmNumber of T Slots Base 2 2 2 2 2Size of T Slots Base 14mm 14mm 14mm 14mm 14mmDiameter of Column 100mm 140mm 140mm 160mm 180mmPower of Spindle Motor 0.75Kw 1.5Kw 1.5Kw 2.2Kw 2.2KwPower of Elevation Motor n/a n/a 0.25Kw 0.25Kw 0.25KwCoolant Pump Motor 0.18Kw 0.18Kw 0.18Kw 0.18Kw 0.18KwCoolant Pump Flow 6L/min 6L/min 6L/min 6L/min 6L/minDimensions(LxWxH) 700x460x1925mm 885x640x2275mm 885x640x2275mm 940x680x2405mm 950x680x2405mmNet Weight 250kgs 600kgs 600kgs 680kgs 700kgs

UPD16

PR80PR60 PR50A PR40

STANDARD ACCESSORIES Drill Chuck and Arbor Reducing Sleeves Drill Drifts SpannerPR50A include:- Power Table Elevation, Pressurised Lubrication,and Electronic Clutch.

FEATURES Stepless Spindle Digital Speed Readout Digital Depth Gauge Auto Feed Auto Tapping Fine Feed Worktable can be Rotated 180 Table can be Tilted 45

Machine Tools

SECTION 2

ASTRA Surface Grinders,

Double Ended Grinders,Brierley Cutter Grinders


SPECIFICATIONS G32-1000 G50-1250 G50-1600 G63-2000 G80-2500 G100-3000 G125-4000

Drilling Capacity in Steel 32 50 50 63 80 100 100Tapping Capacity in Steel M16 M42 M42 M56 M72 M90 M110Distance Between Spindle and Column Face Max: 1000 1250 1600 2000 2500 3150 4000

Min: 300 350 350 450 500 570 600Horizontal Travel 700 900 1250 1550 2000 2580 3400Arm Vertical Travel 750 580 900 1200 1000 1750 1250Arm Rotation +/-180 +/-180 +/-180 +/-180 +/-180 +/-180 +/-180Distance Between Spindle Nose and Baseplate Max: 1000 1220 1220 1600 2000 2500 2500

Min: 250 320 320 400 550 750 690Drilling Spindle Stroke 280 315 315 400 450 500 560Spindle Taper MT4 MT5 MT5 MT5 MT6 MT6 80mmMetricSpindle Speeds (16) 32-2500RPM 25-2000RPM 25-2000RPM 20-1600RPM 8-1000RPM 8-1000RPM 6.3-800RPMPower of Main Motor 2.2kw 4kw 4kw 5.5kw 7.5kw 13kw 17kwMachine Height to Top of Column 2050 2455 2955 2955 3495 4175 4330Height to Top of Machine in Uppermost Position 2300 2850 2850 3310 3710 4350 4550Base Plate Working Area 1070x650 1280x930 1600x930 2065x1130 2615x1380 2500x1480 3165x1550Net Weight (Kgs) 1600 3000 3500 7000 11000 20000 28500

G32-1000 G50-1250

Radial Drilling Machines

PART EXCHANGE WELCOME ON EXISTING KITCHEN-WALKER RADIAL DRILLS

ZB32


SPECIFICATIONS 1545 2045 2550 3060 4080 50100 60100mm in mm in mm in mm in mm in mm in mm in

GRINDING LENGTH 450 17.7 450 17.7 500 19.6 650 25.5 810 31.8 1100 43.3 1100 43.3GRINDING WIDTH 159 6.2 211 8.3 244 9.6 314 12.3 350 13.7 460 18.1 560 22.0GRINDING HEIGHT FROM TABLE 360 141 360 141 410 16.1 410 16.1 347 13.6 397 15.6 397 15.6OPTION 510 20.0 447 17.5 597 23.5 597 23.5

797 31.3 797 31.3VERTICAL FEED ON HAND WHEEL IREV 2MM (0.08) BY MPG

IGRA 0.01mm (0.0004)WHEEL SPEED 60HZ 3500 RPM 50HZ 2900RPM 60HZ 1750 RPM 50HZ 1450 RPMWHEEL SIZE 180x13x31.75 180x13x31.75 406x50x127mmOPTION 200x20x31.75 355x38x127SPINDLE MOTOR 2HP 2HP(CS)5HP(CL) 5HP OR 7.5HP 10 HP. OPTION 15HPWEIGHT 870KGS 920KGS 1350KGS 1700KGS 3250KGS 6000KGS 6300KGS

{

Surface Grinding Machines

TYPESM X Y and Z AXIS = MANUALH X AXIS = HYDRAULIC Y AND Z AXIS = MANUALAH X AXIS = HYDRAULIC Y AXIS = SOLID STATE RELAY Z AXIS = MANUALAHR X AXIS = HYDRAULIC Y AXIS = SOLID STATE RELAY Z AXIS = AC SERVO MOTOROPTIONAL AUTO DOWN FEEDALSO AVAILABLE ARE CANTILEVER TYPE, NC TYPE, PITCH GRINDING AND CNC

SPECIFICATIONS 70100 50150 60150 70150 50200 60200 70200mm in mm in mm in mm in mm in mm in mm in

GRINDING LENGTH 1100 43.3 1600 62.9 1600 62.9 1600 62.9 2100 82.6 2100 82.6 2100 82.6GRINDING WIDTH 660 25.9 460 18.1 560 22.0 660 25.9 460 18.1 560 22.0 660 25.9GRINDING HEIGHT FROM TABLE 397 15.6 397 15.6 397 15.6 397 15.6 397 15.6 397 15.6 397 15.6OPTION 597 23.5 597 23.5 597 23.5 597 23.5 597 23.5 597 23.5 597 23.5

797 31.3 797 31.3 797 31.3 797 31.3 797 31.3 797 31.3 797 31.3VERTICAL FEED ON HAND WHEEL IREV BY MPG (x1)0.1mm(0.004) (x5)0.5mm(0.019) (x10)1mm(0.039)

IGRA (x1)0.001mm(0.00004) (x5)0.005mm(0.0002) (x10)0.01mm(0.0004)WHEEL SPEED 60HZ 1750 RPM 50HZ 1450 RPMWHEEL SIZE OPTION 406 x 50 x 127mmSPINDLE MOTOR 10HP OPTION 15HPWEIGHT 6600KGS 7200KGS 7500KGS 7800KGS 8400KGS 8700KGS 9000KGS

{

PFG-DL3060AH

Brierley Cutter GrindersThe ZB-32A offers an easy way to achieve drill point accuracy.The one machine which grinds conventional and many specialized drill points.Set up in a few seconds.All specifications, dimensions and design charactertics are subject to changewithout notice.FEATURES Air bearing has a hard chromed spindle for long life, standard 5C collets. The tooth rest finger is easily adjustable by turning a knurled knob on either

end of the tooth rest bracket. Clearance angle collar marks angular setting easy-swivels universally for

radial relief sharpening. Air bearing fixture is precision honed and capable of grinding to tight

tolerances. Tools sharpened on an air bearing fixture cut smoother, the spindle floats on

friction fingersensitive control for sharpening end mills as small as 2mm,sharpens all over-periphery, end teeth, notches, flute faces.

Air bearing fixture is easily mounted to FC-32A grinder. Cutting tool capacity-42mm shank, 250mm flute length.

SPECIFICATIONS ZB-32A

Drill size 1.5~32mm(Straight or taper shank)Point angle 40~180Clearance angle 0~18Workhead tilting angle 0~20Brake motor 1/2HPGrinding wheels 180x20x31.75mmDish wheels 165x21x31.75mmNet weight 120kgsDimensions 820x790x740mm

SPECIFICATIONS ZB-50N (DUAL CAM)

Drill size (2.5mm-51mm) straightor taper shank (1,2,3,4,5,6

flute)Point angles 40-180Clearance angle 0-18Motor 1/2HP single or 3 phase

totally enclosed fan cooledGrinding wheelsMain wheel 17x1 1/4x1 1/4

(180mmx32mmx31.75mm)Point thinning dish wheel 6 5/8x7/8x1 1/4

(165mmx21mmx31.75mm)Grinding the end of endmills 2,3,4,6,12 fluteNet weight 300 kgs Dimensions 970mmx910mmx1600mm

STANDARD ACCESSORIES 6 jaw self-centering chuck. Grinding wheel (recessed one

side) Dish grinding wheel for point

thinning. Grinding wheel flange and

balancing weight. Two grinding wheel diamond

dressers (one angle dresser andone straight).

No. 1,2,3,4 Morse Taper sleevefor FC-50N

No. 2,3,4,5,6 M.T Sleeve for FC-80N

Cam No.4 for point angle (40-180)

Cam No.6 for step drill Cam No.8 for 4 flute taps or

reamers A.C. motor. Tools for general use. Service/instruction manual.

OPTIONAL ACCESSORIES Flood coolant system.

(Increases wheel life andprevents burning of drill)

Silicon carbide and diamondwheels for carbide drills.

Radial relief attachment.Relieves radius of pilot toproduce lands. Also forsharpening end mills

Work light (12 Volts) Wheel balancer & arbor Auto feed mechanism (pre-

setting feeding quantity) Powered workhead for

automatic rotation & camaction (R.P.M 0-58 stepless)

Extra grinding wheel flange forcup wheel

Cup grinding wheel Cam for left hand drills Cam for spiral point drills Cam for sheet metal point drills

Machine Tools

SECTION 3

ASTRA Universal and Turret

Milling Machinesand Lathes


Type Voltage Power RPM Grinding Quality Grit Grinding Quality Grit WtRating Wheel Left Wheel Right

DS7150TS 110/240V 275 Watt 3000 150x20x15mm Aluminium Oxide 100 150x20x15mm Reg. Corundum 80 11kg(extra wide)

DS7200T 110/240/415V 575 Watt 3000 200x25x15mm Reg. Corundum 36 200x25x15mm Reg. Corundum 80 15kg

Astra DS Double Ended Bench Grinders

Motors are totally enclosed and dust-proof. Spark arrestors, eye shields arefitted as standard and adjustable toolrests simplify tool grinding operations.

All models can be supplied suitable foroperation on 220/240 volts, singlephase, 50 cycles and the 8 model canbe supplied suitable for operation on380/415 volts, 3 phase, 50 cycles.

All the above machines are available for operation on single phase AC voltage 220/240 volts, 50 cycles. Also available for operation on 380/415 volts, 3 phase, 50 cycles.When ordering please specify voltage, and whether required to operate on single or 3 phase supply.The construction of these grinders complies with the following national and international regulations:United Kingdom Abrasive Wheel RegulationsAustria OVE-VorschriftenBelgium Association des Industries be BelgiqueCanada Canadian Standards AssociationFrance Code Franais de SecuriteNetherlands NEN-ArbeidsinspektieWest Germany VDE-Deutscher Schleifscheiben Ausschuss

When ordering spare parts and/or replacement grinding wheels, please specify type of grinder and size of grinding wheels required.

All bench grinders can be supplied with a pedestal for floor mounting suitable for general workshop use.

SPECIFICATIONS DS8200TGrinding wheel dia. x width x bore. 200x25x15mmGrinding wheel left grit 36 regular corundumGrinding wheel right grit 80 regular corundumBelt size GritPower rating P1 240 Volt, single phase 750 WattsPower rating P1 415 Volt, three phase 800 WattsRPM 50 cycles 3000 min-1Weight 16 kg

DS7200T

DS7150TFitted with 6 (150mm)

grinding wheels

DS8200T


Astra E30 Bench Mill / Drill

SPECIFICATIONSDrilling Capacity 32mm T Slot Size 14mmEnd Milling Capacity 20mm Number of Spindle Speeds 12Face Milling Capacity 76mm Spindle Speed 100-2150 rpmTable Working Surface 730 x 210mm Spindle Stroke 130 mmLongitudinal Travel 540mm Spindle Taper MT3 / R8Cross Travel 180mm Motor 1.1 Kw 1.5hpMax. Distance Spindle to Table 460mm Supply 240voltDistance between Spindle and Column 202mm Dimensions (HxDxW) 1120 x 1010 x1080mmHead Rotation on Column 360 Gross Weight 287 kg

FEATURES Wide Speed Range Heavy Duty Taper Roller Bearings Quill Lock Adjustable Gib Strips Powerful 1.5hp Motor Head Rotates 360 Longitudinal Table Stops Graduations in Imperial or Metric

DESCRIPTION The Eagle E30 Mill/Drill has long beenaccepted in the market as a machinethat can handle the work of machinescosting hundreds of pounds more. It comes standard with 1-13mm DrillChuck, Face Mill Cutter and TiltingVice.

STANDARD ACCESSORIES 1-13mm Drill Chuck & Arbor Eagle Face Mill Cutter Tilting Vice Drawbar (M12 Thread) NVR Switch Gear Interlocked Chuck Guard Manual & Parts List

Astra Universal Mill

SPECIFICATIONSMODEL 300 300-STable Surface 300x1150mm 300x1500mmNumber of T-Slots 3 3Width of T-Slots 18mm 18mmDistance Between T-Slots 70mm 70mmMax. Longitudinal Travel 680mm 1030mmMax. Cross Travel 235mm 235mmMax. Vertical Travel 400mm 400mmSpindle Nose ISO40 ISO40Number of Spindle Speeds 12 12Range of Spindle Speeds 35-1600 rpm 35-1600 rpmNumber of Feeds 14 14Range of Feed Speeds Longitudinal 12-720mm/min 12-720mm/minCross & Vertical 4-240mm/min 4-240mm/minRapid Feed Speeds 700+2100mm/min 700+2100mm/minMain Drive Motor 4Kw 4KwFeed Motor 0.75Kw 0.75KwCoolant Pump 40w 40wNet Weight 2100Kgs 2200KgsGross Weight 2900Kgs 3100KgsDimensions 1690x1535x1630mm 1690x1880x1630mm


Milling Machines

SPECIFICATIONSMODELS ASTRA-3VS ASTRA-4VS ASTRA-5VS-HD

TABLE WORKING SURFACE 1067 x 230 1270 x 254 1270 x 254T SLOT (W X NO. X PITCH) 16 x 3 x 63 16 x 3 x 63 16 x 3 x 63

TRAVEL X x Y x Z- MANUAL 736 x 305 x 406 787 x 400 x 406 787 x 400 x 406X x Y x Z- AUTO 660 x 305 x 406 711 x 400 x 406 711 x 400 x 406

SPINDLE SPINDLE NOSE R8 OR N.S.T 30 R8 OR N.S.T 30 40 ISOSTEPS VARIABLE VARIABLE VARIABLESPINDLE SPEED RPM 60-4200 60-4200 60-4200SWIVELLING ANGLE 45 (R&L) 45(R&L) 45(R&L)QUILL TRAVEL 140 140 140QUILL FEEDS/REV 0.04/0.08/0.15 0.04/0.08/0.15 0.04/0.08/0.15SPINDLE NOSE TO TABLE 57-463 40-446 40-446SPINDLE CENTRE TO COLUMN 213-533 200-680 200-680CROSS TRAVEL OF RAM 320 480 480HORIZONTAL ROTATION OF RAM 360 360 360

MOTOR VERTICAL SPINDLE 3HP 3HP 5HPCOOLANT PUMP 1/8HP-2P 1/8HP-2P 1/8HP-2P

SIZE RAPID KNEE MOTOR -- -- 0.5HPMACHINE (L x W x H) 1400x1450x2100 1500x1500x2200 1500x1500x2200NET WEIGHT (KGS) 900 1280 1320

SPECIFICATIONS MAY BE CHANGED OR IMPROVED WITHOUT NOTICE

ASTRA-5VS-HD

Milling Machines

STANDARD ACCESSORIES OPTIONAL ACCESSORIES

1. TOOL AND TOOL BOX 1. Y POWER FEED UNIT2. ONE SHOT LUBRICATION 2. DIVIDING HEAD3. CHIP COVER FRONT AND REAR 3. ROTARY TABLE4. X, Y, TURCITE B (4VS LO 5VS) 4. DIGITAL READOUT5. X, POWER FEED 5. 6 VICE6. COOLANT EQUIPMENT 6. CLAMP KIT7. LO VOLT LIGHT 7. COLLET CHUCK8. TABLE ELEVATION RAPID 5VS 8. POWER DRAWBAR

Automatic machining has for years relied upon CNC systems which areoften complex to program and requires highly skilled operators. MillPwrfrom Acu-Rite re-defines these rules, with its uniquely intuitive userinterface operators with no CNC experience.

MillPwrs large 10 LCD screen offers the operator simple butcomprehensive information regarding all aspects of the machine and workpiece status.

Entering data is easy. Dimensions are simply entered from the part printfollowing a prompt screen.

Quality graphics assist the operator during and after part construction,verifying the job every step of the way.

FEATURES FOR PRODUCTIVITY:

2,2.5 or 3D options Full range of drilling cycles including Full and Partial PCD Liner/Row Column Rectangular Frame and Array Full range of Canned Cycles including: Rectangular and Circular Pockets Frames, Island and Bosses Cams, Elipses and Spirals 3-D Contouring Import Files and Geometry from CADAM


Astra Lathe

SPECIFICATIONSChieftain Lathe-Model 1640 1660 1840 1860 1880Between Centres 1000(40) 1500(60) 1000(40) 1500(60) 2000(80)Centre Height 210mm 210mm 230mm 230mm 230mmMaximum Swing 425mm 425mm 460mm 460mm 460mmSwing Over Cross Slide 250mm 250mm 290mm 290mm 290mmSwing in Gap 640mm 640mm 700mm 700mm 700mmLength of Gap 310mm 310mm 310mm 310mm 310mmBed Width 340mm 340mm 340mm 340mm 340mmSpindle Bore 80mm 80mm 80mm 80mm 80mmSpindle Taper (with Sleeve) MT7 (MT5) MT7 (MT5) MT7 (MT5) MT7 (MT5) MT7 (MT5)Spindle Nose Camlock D1-8 Camlock D1-8 Camlock D1-8 Camlock D1-8 Camlock D1-8Tailstock Quill Diameter 75mm 75mm 75mm 75mm 75mmTailstock Quill Travel 125mm 125mm 125mm 125mm 125mmTailstock Taper MT4 MT4 MT5 MT5 MT5Cross Slide Travel 275mm 275mm 275mm 275mm 275mmCompound Slide Travel 140mm 140mm 140mm 140mm 140mmMax. Size of Cutting Tool Shank 25mm 25mm 25mm 25mm 25mmNumber of Speeds 12 12 12 12 12Range of Speeds 25-1800 rpm 25-1800 rpm 25-1800 rpm 25-1800 rpm 25-1800 rpmLeadscrew Pitch 6mm 6mm 6mm 6mm 6mmCross Screw 4mm 4mm 4mm 4mm 4mmLongitudinal Feeds 0.041-2.476mm/rev 0.041-2.476mm/rev 0.041-2.476mm/rev 0.041-2.476mm/rev 0.041-2.476mm/revCross Feeds 0.016-0.991mm/rev 0.016-0.991mm/rev 0.016-0.991mm/rev 0.016-0.991mm/rev 0.016-0.991mm/revMetric Threads 0.5-20mm in 23 steps 0.5-20mm in 23 steps 0.5-20mm in 23 steps 0.5-20mm in 23 steps 0.5-20mm in 23 stepsImperial Threads 1.625-72 TPI in 65 steps 1.625-72 TPI in 65 steps 1.625-72 TPI in 65 steps 1.625-72 TPI in 65 steps 1.625-72 TPI in 65 stepsModule Threads 0.25-10 in 24 steps 0.25-10 in 24 steps 0.25-10 in 24 steps 0.25-10 in 24 steps 0.25-10 in 24 stepsDiametric Threads 3.625-96DP in 45 steps 3.625-96DP in 45 steps 3.625-96DP in 45 steps 3.625-96DP in 45 steps 3.625-96DP in 45 stepsMotor 71/2hp 71/2hp 71/2hp 71/2hp 71/2hpPower Supply 415volt 415volt 415volt 415volt 415voltNet Weight 2488Kg 2488Kg 2688Kg 2835Kg 3055KgDimensions-(LxWxH) 2300x1000x1320mm 2800x1000x1320mm 2300x1000x1340mm 2800x1000x1340mm 3320x1000x1340mm

STANDARD ACCESSORIES 3-Jaw Chuck Fixed Steady Traveling Steady Splash Guard Machine Stand Live Centre Machine Lamp Coolant System Foot Brake Chuck Guard & Lead Screw Guard Quick Change Toolpost 4 Jaw Chuck Face Plate Thread Dial Multi Position Longitudinal Stop

FEATURES Extra Large Spindle Bore Hardened and Ground Gears Leadscrew Guards Hardened and Ground Bedways Wide Headstock Foot Brake

Astra Valiant Lathe

SPECIFICATIONS Valiant 1500 Valiant 1500B Valiant 2000 Valiant 2000B

Swing over Bed 500mm 500mm 500mm 500mmSwing over Carriage 300mm 300mm 300mm 300mmSwing over Gap 720mm 720mm 720mm 720mmLength of Gap 210mm 210mm 210mm 210mmDistance between Centres 1500mm 1500mm 2000mm 2000mmWidth of Bed 400mm 400mm 400mm 400mmSpeed Range 10-1400rpm 24 steps 14-1250rpm 24 steps 10-1400rpm 24 steps 14-1250rpm 24 stepsSpindle Bore 80mm 104mm 80mm 104mmSpindle Taper (Camlock) D1-8 D1-11 D1-8 D1-11Number of Feeds 64 64 64 64Range of Feeds-Normal 0.11-1.6mm/rev 0.11-1.6mm/rev 0.11-1.6mm/rev 0.11-1.6mm/revRange of Feeds- Fine 0.028-0.11mm/rev 0.028-0.11mm/rev 0.028-0.11mm/rev 0.028-0.11mm/revRange of Feeds- Coarse 1.76-6.4mm/rev 1.76-6.4mm/rev 1.76-6.4mm/rev 1.76-6.4mm/revMetric Thread Range 1-192mm 44 steps 1-192mm 44 steps 1-192mm 44 steps 1-192mm 44 stepsImperial Thread Range 12-24T.P.I. 26 steps 12-24T.P.I. 26 steps 12-24T.P.I. 26 steps 12-24T.P.I. 26 stepsDiametrial Range 12-96D.P. 32 steps 12-96D.P. 32 steps 12-96D.P. 32 steps 12-96D.P. 32 stepsModule Thread Range 0.25-48 0.25-48 0.25-48 0.25-48Longitudinal Rapid Feed 4mm/min 4mm/min 4mm/min 4mm/minCross Slide Travel 320mm 320mm 320mm 320mmCompound Slide Travel 140mm 140mm 140mm 140mmTailstock Quill Travel 150mm 150mm 150mm 150mmTailstock Quill Diameter 75mm 75mm 75mm 75mmMotor 7.5Kw 10hp 7.5Kw 10hp 7.5Kw 10hp 7.5Kw 10hpNet Weight 2300kgs 2300kgs 2650kgs 2650kgsDimensions 3350x1250x1380mm 3350x1250x1380mm 3850x1520x1380mm 3850x1520x1380mm

FEATURES Large Spindle Bore Carriage Controls Foot Brake Large HP Motor

STANDARD ACCESSORIES 3 Jaw Chuck 4-Jaw Chuck Face Plate Fixed Steady Travelling Steady Coolant System Halogen Lamp Reducing Sleeve Steel Centres Chuck & Leadscrew Guards Live Centre 2 Axis Digital Readout

OPTIONAL ACCESSORIES Taper Turning Attachment Quick Change Toolpost Tailstock Drill Chuck

Machine Tools

SECTION 4

ASTRA Band Saws

(Standard, Semi-Automatic)

THOMASMetal Cutting Off Machines(Standard, Semi-Automatic,

Automatic & CNC)


Halifax Lathe

SPECIFICATIONS Halifax 3000 Halifax 3000B Halifax 4000 Halifax 4000B Halifax 5000 Halifax 5000BSwing over Bed 800mm 800mm 800mm 800mm 800mm 800mmSwing over Carriage 480mm 480mm 480mm 480mm 480mm 480mmSwing over Gap 1000mm 1000mm 1000mm 1000mm 1000mm 1000mmLength of Gap 300mm 300mm 300mm 300mm 300mm 300mmDistance betweenCentres 3000mm 3000mm 4000mm 4000mm 5000mm 5000mmWidth of Bed 600mm 600mm 600mm 600mm 600mm 600mmSpeed Range 7.5-1000rpm 5.4-720rpm 7.5-1000rpm 5.4-720rpm 7.5-1000rpm 5.4-720rpmNumber of Speeds 18 18 18 18 18 18Spindle Bore 104mm 130mm 104mm 130mm 104mm 130mmSpindle Taper D1-11 D1-11 D1-11 D1-11 D1-11 D1-11Number of Feeds 64 64 64 64 64 64Feed Rates Normal 0.1-1.52mm/rev 0.1-1.52mm/rev 0.1-1.52mm/rev 0.1-1.52mm/rev 0.1-1.52mm/rev 0.1-1.52mm/revFeed Rates Fine 0.06-24.3mm/rev 0.06-24.3mm/rev 0.06-24.3mm/rev 0.06-24.3mm/rev 0.06-24.3mm/rev 0.06-24.3mm/revFeed Rates Coarse 1.6-24.3mm/rev 1.6-24.3mm/rev 1.6-24.3mm/rev 1.6-24.3mm/rev 1.6-24.3mm/rev 1.6-24.3mm/revMetric Thread Range 1-240mm/50 Steps 1-240mm/50 Steps 1-240mm/50 Steps 1-240mm/50 Steps 1-240mm/50 Steps 1-240mm/50 StepsWhitworth ThreadRange 1-14T.P.I./26 Steps 1-14T.P.I./26 steps 1-14T.P.I./26 steps 1-14T.P.I./26 steps 1-14T.P.I./26 steps 1-14T.P.I./26 stepsModule Thread Range 0.5-120mm/53 Steps 0.5-120mm/53 Steps 0.5-120mm/53 Steps 0.5-120mm/53 Steps 0.5-120mm/53 Steps 0.5-120mm/53 StepsDiametral Pitch Thread 1-28D.P. / 24 Steps 1-28D.P. / 24 Steps 1-28D.P. / 24 Steps 1-28D.P. / 24 Steps 1-28D.P. / 24 Steps 1-28D.P. / 24 StepsCross Slide Travel 500mm 500mm 500mm 500mm 500mm 500mmCompound Slide Travel 200mm 200mm 200mm 200mm 200mm 200mmTailstock Quill Travel 250mm 250mm 250mm 250mm 250mm 250mmTailstock Taper MT5 MT5 MT5 MT5 MT5 MT5Motor Power 15kw/ 20hp 15kw/ 20hp 15kw/ 20hp 15kw/ 20hp 15kw/ 20hp 15kw/ 20hpNet Weight 5500kgs 5500kgs 6100kgs 6100kgs 6900kgs 6900kgsDimensions 5250x1550x1630mm 5250x1550x1630mm 6250x1550x1630mm 6250x1550x1630mm 7250x1550x1630mm 7250x1550x1630mm

FEATURES Hardened and Ground Guideways Low Spindle Speeds Large Spindle Bore Motorised Saddle Heavy Duty Construction Gap Bed

STANDARD ACCESSORIES 3-Jaw Chuck 4-Jaw Chuck Face Plate Fixed Steady Travelling Steady Coolant System Halogen Lamp

OPTIONAL ACCESSORIES Digital Readout Taper Turning Attachment


Astra Horizontal Bandsaws Astra Horizontal Bandsaws

SPECIFICATIONS UE330SACapacity 330mm 330x480mmCapacity 45 225mmBlade Size 27x0.9x4100mmBlade Speeds 20-80mpm variableMotor 3hpFloor Space Packing 2300x810x1380mmWeight 600kg

ASTRA UE330SA SEMI-AUTOMATIC ASTRA UE916

ASTRA UE250V

ASTRA UE712

SPECIFICATIONS UE712 UE916 UE250VCapacity 180mm 225mm 250mm

180x280mm 225X345mm 250x415mmBlade size 19x0.9x2360mm 25x0.9x3035mm 27x0.9x3300mmBlade speed 22, 33, 45, 65 25, 40, 51, 71 25-75 mpmMotor 1HP 1 1/2 HP 2HPFloor Space 1257x445mm 1625x760mm 1854x749x1117mmWeight NW 130kg 285kg 320kg

GW 150kg 320kg 360kg


Astra Horizontal Bandsaws Thomas Metal Cutting Off Machines 250 Technics & Super Cut

SUPERCUT 300

250 TechnicsThree-phase electric motor with two cutting speeds,or single-phase with one cutting speed.Mitre cutting 0-45L&R.Vice opening 105mm.Antiburr jaw.Mechanical coolant pump.

Optional equipment Pedestal in steel plate.

Super Cut 300/315Three-phase electric motor. Two cutting speeds 41-82rpm.Quick lock vice.Vice opening 120mm.Work table height with pedestal 980mm.Mitre cutting 45-0-45R+L.Antiburr jaw. Hinged pin on eccentric brush (adjustable).Mechanical coolant pump.

CUTTING CAPACITY 250 TECHNICSCapacity at 90 75

65 90x50

Capacity at 45 65 58 70x50

CUTTING CAPACITY SUPERCUT 300 SUPERCUT 315Capacity at 90 90 95

75 82 100x65 110x70

Capacity at 45 R-L 80 90 70 80 80x60 85x70

Optional Equipment Pedestal in steel plate Pneumatic vice-Model 300 & 315 only Low revolution motor (22/44rpm) for hard material cutting-

Model 300 & 315 only

Single-phase kW 0.9 mm 250 Kg 115

Three-phasekW 0.75-0.95 mm 250 Kg115kW 1.2-1.6 mm 300 Kg 158kW 1.3-1.9 mm 315 Kg 163

ASTRA 1018

SPECIFICATIONS 1018Capacity at 90 10 (260mm)

9 x 9 (230mm x 230mm) 8 x 161/2 (200mm x 420mm)

Capacity at 45 9 (230mm) 81/2 x 81/2 (220mm x 220mm) 81/2 x 9 (220mm x 230mm)

Blade size 1 x1321/2(25mm x 0.9mm x 3365mm)

Motor 2hp (1.5kw)Speed Range 50, 125, 200, 275 fpm

(15, 38, 61, 84 mpm)Packing Size 72 x 30 x 42Net Weight 320kgsGross Weight 370kgs

NEW!


Thomas ThomasSuper Technics Super Technics

SUPER TECHNICS 350 SA

kW 1.8 - 2.4 mm 350 Kg 280

Super Technics 350 SASemi-automatic cutting cycle.Head rotation from 0 to 45 right and left.Safe-blade adjustable clutch.Double adjustable hinged pivot.Foot control switch.Gear-box reduction unit in oil bath with nickel bronze and hardened and ground worm screw.Electropump for coolant liquid.

Optional Equipment Automatic bar-feeding system. Low revolution motor (22/44rpm) for hard material cutting. Three speed motor.

CUTTING CAPACITY SUPER TECHNICS 350 SACapacity at 90 120

105x105 160x90

Capacity at 45 R-L 100 85x85 85x70

AUTO BAR FEED SYSTEM

SUPER TECHNICS 350

Super Technics 350Three-phase electric motor 1.35-1.7-2.4kW.Cutting speeds 22-44-88rpm.Quick lock vice.Vice opening 170mm.Axial moving of the vice unit and cutting head turning 90 to the right for longitudinal cutting.Mitre cutting 45-0-45 R+L.Working table height with pedestal 1010mm.Antiburr jaw.Hinged pin on eccentric bush (adjustable).Blade protection clutch.Mechanical coolant pump.

Optional Equipment Pedestal in steel plate. Pneumatic vice.

CUTTING CAPACITY SUPER TECHNICS 350Capacity at 90 120

105x105 160x90

Capacity at 45 R-L 100 85x85 85x70

kW 1.35 - 1.7 - 2.4 mm 350 Kg 215


Thomas BandsawsZip 18, 21 & 28

Thomas BandsawsZip 30

ZIP 30

Super Trad 301Blade Size 2750x27x0.9Motor size 1.0/1.4 kWSpeed 33/66 mt/minVice opening 305mmWeight 440kg

Optional Equipment Multi-mode down feed

CUTTING CAPACITY SUPER TRAD 301Capacity at 0 255

250 300x180

Capacity at 45L 190 180 190x170

Capacity at 45 R 160 140 170x120

Capacity at 60 R 110 110 110x150

SUPER TRAD 301

Zip 30Two cutting speeds 32-64m/minQuick lock viceVice opening 270mmAngle cutting 0-60RWorking table height 970mmMechanical blade tensionCoolant pump 0.07kWPedestal in steel plate

CUTTING CAPACITY ZIP 30Capacity at 90 220

198 245x115

Capacity at 45 R 150 140 140x140

Capacity at 60 R 85 85 85x85

Single-phase kW 0.75 mm 2080x20x0.9 Kg 150

Three-phasekW 0.4 - 0.6

kW 0.75x1.1 mm 2480x27x0.9 Kg 250

ZIP 28ZIP 21

Zip 21Cutting Speed 40/80m/min(single phase version)Two cutting speeds 40-80m/min(three phase version)Angle Cutting 0-45 R

Mechanical blade tensionElectric coolant pump0.06kWVice Opening 200mmPedestal in steel plateWorking table height 940mm


160 190x160

Capacity at 45 R 120 100 120x100

Zip 28Two cutting speeds 40-90m/minAngle Cutting 0-60 RMechanical blade tensionElectric coolant pump0.06kW

Vice Opening 270mmPedestal in steel plateWorking table height 940mmQuick lock vice

Optional Equipment Down Feed


190 245x80

Capacity at 45 R 140 140x140 140x140

Capacity at 60 R 90 85 85x85

Single-phase kW 0.4 mm 1735x13x0.65 Kg 74

Zip 18Cutting Speed 65m/minAngle Cutting 0-45 R

Mechanical blade tensionVice Opening 185mmBench Type Machine


145 175x90

Capacity at 45 R 110 110 110x110


Thomas Bandsaws Thomas BandsawsAutomatic

SUPER TRAD 300 AO CNEvolution

Super Trad 30O AO CN EvolutionBlade Size 2750x27x0.9Motor size 1.3/1.9 kWSpeed 33/66 mt/minVice opening 290mmWeight 900kg

Optional Equipment Variator Vertical roller for bundle cutting Hydraulic vertical vice for bundle cutting 2m loading roller 2m un/loading roller

CUTTING CAPACITY SUPER TRAD 300 AOCNCapacity at 0 255

240 280x200

Capacity at 45 R 190 180 190x170

CUTTING CAPACITY SUPER TRAD 380Capacity at 0 300

260 330x160

Capacity at 45L 260 250 270x200

Capacity at 45 R 200 180 200x160

Capacity at 60 R 180 170 170x170

SUPER TRAD 380 MULTIMODE

Super Trad 380 MultimodeBlade Size 2750x27x0.9Motor size 1.0/1.4 kWSpeed 33/66 mt/minVice opening 305mmWeight 470kg

Optional Equipment Pneumatic Vice 2m loading roller 2m un/loading roller

SUPER TRAD 380 SO DIGIT

Super Trad 38O SO DigitBlade Size 2925x27x0.9Motor size 1.3/1.9 kWSpeed 36/72 mt/minVice opening 355mmWeight 600kg

Optional Equipment Variator 2m loading roller 2m un/loading roller

CUTTING CAPACITY SUPER TRAD 350 SOCapacity at 0 300

260 330x160

Capacity at 45L 260 250 270x200

Capacity at 45 R 200 180 200x160

Capacity at 60 R 180 170 170x170


Thomas Bandsaws Thomas Bandsaws

SAR 440 SA GDSBlade Size 5200x34x1.1Motor size 2.2 kWSpeed 26138 mt/minVice opening 615mmWeight 0kg

Optional Equipment Variator 2m loading roller 2m un/loading roller

CUTTING CAPACITY SAR 440 SA GDSCapacity at 60 L 320

285 320x190

Capacity at 45L 440 400 450x315

Capacity at 0 440 440 610x440

Capacity at 45 R 440 400 450x310

Capacity at 60 R 320 280 320x190

SAR 460 SA-G Digit SAR 460 SA-G DigitBlade Size 5500x41x1.3Motor size 5.5 kWSpeed 20110 mt/minVice opening 770mmWeight 2600kg

Optional Equipment Hydraulic vertical vice for bundle cutting 2m loading table

CUTTING CAPACITY SAR 460 SA-G DigitCapacity at 0 460

450 760x380

Capacity at 45 R 400 380 400x360

Capacity at 60 R 210 210 210x280

Semi-Automatic

SUPER TRAD 350 AOCNEvolution

CUTTING CAPACITY SUPER TRAD 350 AOCNCapacity at 0 270

260 350x240

Capacity at 45 R 230 210 230x150

Capacity at 60 R 140 140 140x140

Super Trad 350 AO CN EvolutionBlade Size 2925x27x0.9Motor size 1.3/1.9 kWSpeed 36/72 mt/minVice opening 355mmWeight 1200kg

Optional Equipment Variator Vertical roller for bundle cutting Hydraulic vertical vice for bundle cutting 2m loading roller 2m un/loading roller

SAR 332 SA GDS

CUTTING CAPACITY SAR 332 SA GDSCapacity at 60 L 200

180 180x200

Capacity at 45L 300 250 280x250

Capacity at 0 330 330 480x130

Capacity at 45 R 310 280 300x250

SAR 332 SA GDSBlade Size 3810x27x0.9Motor size 1.5/2.2Speed 37/74 mt/minVice opening 485mmWeight 720kg

Optional Equipment Variator Hydraulic vice

Automatic Semi-Automatic


Thomas Double Column Bandsaws

270 CICL CN

SPECIFICATIONS 270 Cicl. CN 340 Cicl. CN 420 Cicl. CN 460 Cicl. CN 550 Cicl. CN 720 Cicl. CNMotor for blade rotation kW2.25 kW3.75 kW3.75 kW5.6 kW5.6 kW7.5Motor for hydraulic unit kW0.75 kW0.75 kW0.75 kW1.5 kW1.5 kW2.2Blade size mm. 3660x27x0.95 mm. 3920x34x1.1 mm.4570x34x1.1 mm. 5300x41x1.3 mm. 5800x41x1.3 mm. 8120x54x1.6Blade revolution speed mm/min. 20110 mm/min. 20110 mm/min. 20110 mm/min. 2080 mm/min. 2080 mm/min. 2080Vice opening mm. 290 mm. 360 mm. 430 mm. 490 mm. 610 mm. 810Working table height mm. 700 mm. 700 mm. 700 mm. 700 mm. 700 mm. 610Stroke of bar feed carriage no limit no limit no limit no limit no limit no limitKerf loss on automatic cycle mm. 100 mm. 100 mm. 100 mm. 100 mm. 100 mm. 100Weight Kg. 1700 Kg. 1800 Kg. 2700 Kg. 3300 Kg. 4000 Kg. 5500Dimensions cm. 200x212x163 cm. 215x212x168 cm. 227x231x181 cm. 272x245x190 cm. 285x245x219 cm. 381x240x237

CUTTING CAPACITY 270 Cicl. 340 Cicl. CN 420 Cicl. CN 460 Cicl. CN 550 Cicl. CN 720 Cicl. CN 90 mm. 270 mm. 340 mm. 420 mm. 460 mm. 550 mm. 720 90 mm. 260x260 mm. 330x330 mm. 420x420 mm. 460x460 mm. 550x550 mm. 720x720 90 mm. 280x260 mm. 350x330 mm. 420x420 mm. 480x460 mm. 600x550 mm. 800x720

KV 50

SPECIFICATIONSMODEL & CAPACITY KV40 KV50 KV60 KV100BLADE TO COLUMN 410mm 520mm 600mm 1000mmMAX. WORK HEIGHT 300mm 300mm 300mm 300mmTABLE SIZE 600X500mm 600x500mm 600x500mm 600x500mmTABLE INCLINATION 15deg 15deg 15deg 15degSAW BLADE LENGTH 3285mm 3840mm 3950mm 4500mmSAW BLADE WIDTH 16mm 16mm 16mm 16mmSPEEDS LOW 15-55m.min HIGH96-390m.minMOTOR 2HP (1.5Kw)NET WEIGHT (approx.) 440kg 500kg 700kg 800kg

STANDARD ACCESSORIES Saw blade welder Digital speed display Built-in cleaning brush Variable speed Low volt light Tilting table Limit switches to blade covers

Astra Vertical Bandsaws

Machine Tools

SECTION 5

Slotting Machines Shaping Machines

Dividing HeadsIndexing UnitsRotary Tables

Compound TablesMagnetic ChucksMagnetic BasesLathe Centres

VicesCoolant Equipment

Tapping AttachmentsFeed Motors


Astra Circular Saw Blades

SPECIFICATIONSDiameter No. of teeth Pitch200mm (8) Fine 160 4mm200mm (8) Coarse 100 6mm225mm (8 3/4) Fine 180 4mm225mm (8 3/4) Medium 120 6mm225mm (8 3/4) Coarse 80 8mm250mm (10) Fine 200 4mm250mm (10) Medium 120 6mm250mm (10) Coarse 100 8mm275mm (11) Fine 220 4mm275mm (11) Medium 140 6mm275mm (11) Coarse 110 8mm300mm (12) Fine 220 4mm300mm (12) Medium 160 6mm300mm (12) Coarse 120 8mm315mm (12 3/8) Fine 220 4mm315mm (12 3/8) Medium 160 6mm315mm (12 3/8) Coarse 120 8mm350mm (13 3/4) Fine 280 4mm350mm (13 3/4) Medium 160 7mm350mm (13 3/4) Coarse 100 11mm

A very clean cut is made by these blades due to the special alternating tooth chamfer. We carry 21 different typesof blade in stock, though there are numerous other sizes we can offer. They will fit Astra Mep, Brown, Sip, Omes,Adige, Thomas.

FINE- for steel, thin walledtubes/sections

MEDIUM- for thick walled steeltubes/sections

COARSE- for round, square and flatsolid steel bars

Astra SHSS Circular Super High Speed SteelSaw Blades 32mm bore. Please specifyfine, medium or coarse when ordering byadding suffix F, M or C.8 200x1.8mm HSS2008 3/4 225x1.9mm HSS22510 250x2mm HSS25011 275x2mm HSS27512 300x2.5mm HSS30012 1/2 315x2.5mm HSS31514 350x3mm HSS350

SHS Premium Blades for Increased AccuracySide Run Out Max. 0.1mm.

PHSS200PHSS225PHSS250PHSS275PHSS300PHSS315PHSS350

Carbide Tipped Blades for Cutting Aluminium32mm bore Tooth KERF

250mm (10) 80 3.2mm CTB250300mm (12) 96 3.2mm CTB300350mm (14) 108 3.5mm CTB350400mm (16) 120 3.5mm CTB400

Astra Wax For clean smooth cutting of aluminium. Per stick.AKA/WAXAstra Cutting Oil C/OILHorizontal bandsaw blades all sizes available to order


Slotting Machines Shaping Machines150 1AC 300 3AC

SPECIFICATIONSMODEL 150 200 250 300 300MSTROKE (ADJUSTABLE ZERO TO) mm 150 200 250 300 400No. of STROKES PER MIN (VARIABLE) sam 35 to 140 30 to 120 22 to 90 16 to 64 16 to 64VERTICAL MOVEMENT of RAM mm 280 370 430 500 500OPENING BETWEEN TABLE & HEAD mm 380 460 520 570 720THROAT mm 250 350 425 500 500TABLE DIMENSIONS mm 220x440 280x500 340x560 400x650 400x650ROTARY TABLE TO SPECIAL ORDER mm - 320 450 450 450MOTOR POWER HP/KW 2/1.5 3/2.2 4/3 5.5/4 5.5/4

CROSS TABLE: manufactured in high quality mechanical cast-iron, with ground and scraped sliding surfaces and forcedlubrication. Ground recirculating ball screws for carriage travel with centesimal movements (Y axis). Table travel (unless controlled) is obtained using a handwheel with a chromed drum with decimal index.TOOL HEAD AND RAM: in cast-iron, ground ram sliding guides, scraped head and sliding surfaces. Automatic lubrication.Head rotates by 20 in two directions, equipped with a slit to allow spanners to be inserted to adjust ram travel.ELECTRICAL SYSTEM: each controlled axis is equipped with a BRUSHLESS motor with relevant DRIVER controlled by amicroprocessor, with which the operator can easily programme the work to be performed by the slotting machine on the pieces.STANDARD ACCESSORIES: cooling system for all models, service spanners and instruction booklet.ACCESSORIES UPON REQUEST: built-in rotating table with angular indexing positioning device, automatic lubrication pump forthe ram and carriage.TOOL DETACHMENT AND AUTOMATIC FEEDS: the tool is fixed to the head of the ram and the only movement it performs is thecut, while feed and tool detachment are performed by the piece-holding table. Detachment and feed are reversed automatically.

L350E L650E

SPECIFICATIONSMODEL L-450 E L-500 E L-550 E L-600 E L650 E (251/2) L750 E (291/2) Maximum stroke 450mm 500mm 550mm 600mm 650mm 750mmNumber of speeds 6 6 6 6 6 6Strokes per minute 20-30-42-62-94-130 19-28-40-59-90-124 17-26-36-53-80-112 17-26-36-53-80-112 20-28-40-56-80-112 17-25-35-49-70-98Longitudinal traverse 500mm 500mm 600mm 600mm 650mm 750mmVertical traverse 305mm 305mm 315mm 315mm 330mm 350mmMaximum distance table to ram 375mm 375mm 370mm 370mm 405mm 460mmTable dimensions 450x300x300mm 450x300x300mm 550x310x310mm 550x310x310mm 650x390x390mm 750x400x410mmVertical traverse of the tool head 150mm 150mm 150mm 150mm 180mm 180mmAutomatic feeds of the table (5) 0.2 a 1mm 0.2 a 1mm 0.2 a 1mm 0.2 a 1mm 0.25-1.5mm 1.25-1.5mmAutomatic feeds of the tool holder (5) - - - - 1.2-1mm 0.2-1mmWidth, height and opening of the vice 220x70x270mm 220x70x270mm 220x70x270mm 220x70x270mmMotor 2 CV 3 CV 3 CV 4 CV 5.5HP 7.5HPNet weight 850kg 875kg 1,025kg 1,150kgGross weight 1,000kg 1,025kg 1,300kg 1,325kgDimensions of the packing 1.86x0.96x1.52mm 1.86x0.96x1.52mm 2.12x1.06x1.55mm 2.15x1.06x1.55mm

SPECIFICATIONS L350ELength of stroke 133/4 (350mm)Number of speeds 3Strokes per minute 35 70 140Horizontal movement of the table 14 (355mm)Vertical movement of the table 133/4 (350mm)Maximum distance from table to ram 17 (430mm)Table dimensions 101/4x133/4x101/4 (260x350x260mm)Tool holder capacity 1 3/16x 3/4 (30x18mm)Vertical travel of the tool head 5 1/8 (130mm)Automatic feeds of the table (5) .0079: .0394 (0.2:1mm)Width, height and opening of the vice 7x2 5/32x9 (180x55x230mm)Motor 1.5HPNet weight 550kgGross weight 700kgCase dimensions 1.46x0.90x1.37m

Model L-350 E/2 With two speeds motor and the following strokes per minute 23-35-46-70-92-140.

Model L350 E (133/4) 3 speeds 35 70 140. Standard equipment: swivel vice,tool kit and instruction book. Extra equipment: auto toollift.

Models L450 E(18) L500 E(193/4) L550 E (211/2) L600 E(231/2) Standard equipment: automatic horizontal movement ofthe table, automatic tool lift, automatic lubrication,swivelling and graduated table with front support, multi-disc clutch with brake, telescopic spindle for verticalmovement of table, graduated swivel vice, tool kit andinstruction book.


Semi-Universal Dividing Heads Universal Dividing Heads

STANDARD ACCESSORIESDIVIDING PLATE A, B, CNUMBERS OF HOLES OF DIVIDING PLATE (WORM GEAR REDUCTION RATIO 1:40)

PLATE A 15 16 17 18 19 20PLATE B 21 23 27 29 31 33PLATE C 37 39 41 43 47 49

FEATURESSemi-Universal Dividing Head is a simplified type of Universal Index Center and can be used for direct and indirect dividing. Noaccessories for the differential dividing and spiral work are included, but the whole construction of the dividing head and tailstockare identical with those of the universal type.The unit has a Direct Indexing Plate with 24 holes enabling the direct division of 2, 3, 4, 6, 8, 12 and 24. Three further IndexingPlates are provided as standard to facilitate indirect dividing from 2 to 50 and also most useful divisions up to 380.

ASTRA JUNIOR& BS-1

SPECIFICATIONS ASTRA JUNIOR & BS-1 SEMI-UNIVERSAL DIVIDING HEADSMODEL A B C D E F G WEIGHT (KG)JUNIOR 189 160 100 173 16 91 140 22BS-1 293 210 128 220 16 114 156 36

TAIL-STOCK FOR JUNIOR & BS-1 SEMI-UNIVERSAL DIVIDING HEADS

MODEL A B C D E F TAPER OF DIAMETER OF CENTER SPINDLE HOLE

JUNIOR 90 105 16 100 166 127 B&S NO.7 18BS-1 108 134 16 128 184 150 B&S NO.9 20

BS-2

STANDARD ACCESSORIESDIVIDING PLATE A, B, CNUMBERS OF HOLES OF DIVIDING PLATE (WORM GEAR REDUCTION RATIO 1:40)

PLATE A 15 16 17 18 19 20PLATE B 21 23 27 29 31 33PLATE C 37 39 41 43 47 49

FEATURESThe HOMGE Universal Dividing Head has been designed to carry out all types of gear cutting. Precision dividing and spiral workwith greater precision and efficiency than has been possible before. The center face can be tilted from a horizontal position of90 down to 10 from vertical, and inclinations can be read off a scale graduated in degrees. The ratio of worm to gear is 1:40.

SPECIFICATIONS BS-2 UNIVERSAL DIVIDING HEADMODEL A B H h A B G TAPER OF CENTER WEIGHT (KG)BS-2 365 272 236 132.7 213 134 16 B&S NO.10 73

TAIL-STOCK FOR SEMI-UNIVERSAL DIVIDING HEAD BS-2

MODEL A1 A1 B1 G1 H1 CENTER HEIGHT (H2) WEIGHT (KG) MEASUREMENT M3BS-2 T/S 194 177 125 16 147 MAX: 138 MIN: 115 PACKED WITH THE DIVIDING HEAD


Semi-Universal Dividing Heads Universal Dividing Heads

SPECIFICATIONSMODEL Spindle Centre height Swing Standard Weight

morse taper tenon sizeDSU3100 / DU3100 3 4 8 14mm 45kgDSU3125 / DU3125 3 5 10 14mm 52kgDSU4125 / DU4125 4 5 10 14mm 58kgDSU4150 / DU4150 4 6 12 16mm 65kgDSU4175 / DU4175 4 7 14 16mm 73kgDSU5175 / DU5175 5 7 14 16mm 91kgDSU5200 / DU5200 5 8 16 18mm 101kg

ASTRA MECA Semi-Universal Dividing Heads- Type DSUSupplied complete with tailstock and centre rest, index chart, individual test certificate and fully detailed instruction book.

SPECIFICATIONSDividing heads Max Chuck Chuck code Max Backplate Backplate codeDU and DSU diameter diameter3100 125mm CHK/125 125mm ASA2 B125/3100/125 3125 125mm CHK/125 125mm ASA2 B125/3100/1254125 160mm CHK/160 160mm ASA3 B160/4125/50/754125 200mm CHK/200 200mm ASA3 B200/4125/50/754150 200mm CHK/200 200mm ASA3 B200/4125/50/754175 200mm CHK/200 200mm ASA3 B200/4125/50/755175 200mm CHK/200 200mm ASA4 B200/5175/52005200 250mm CHK/250 250mm ASA4 B250/5200

CRITERION MECA Dividing Heads 3 Jaw Chucks and BackplatesSPECIFICATIONSMODEL B Spindle Hole Nose C D E G H J K L Dividing Horizontal Between Vertical DU DSU

mm Inches mm internal through external mm mm mm mm Inches mm mm mm mm minim ratio position centres positiontaper spindle taper mm to 200mm to 300mm

DU-3100-DSU-3100 100 4 200 58 45

DU-3115-DSU-3115 115 45/8 215 M3 20 ASA 2 165 155 230 22 6 130 130 20 60 100 62 49

DU-3125-DSU-3125 125 5 225 66 53

DU-4125-DSU-4125 125 5 240 78 58200

DU-4150-DSU-4150 150 6 265 M4 27 ASA 3 195 275 25 6 160 155 60 100 175 85 6530 8

DU-4175-DSU-4175 175 7 290 215 5/8 1:40 93 73

DU-5175-DSU-5175 175 7 310 117 91

DU-5200-DSU-5200 200 8 335 127 101

Sizes only for DU model Max. load admitted kg Net weight kg

121416

1416

1416

55 97 115147173186

62 84 11513715116518219122570 87 117147188243

M5 38 ASA 4 225 230 355 170 155 100 200 300161822

2530

68

A F

ASTRA MECA Fully Universal Dividing Head - Type DUSupplied complete with tailstock, full set of change wheels, quadrant, centre rest, index chart, individual test certificate and fullydetailed instruction book.

INDEXING POSSIBILITIESDIRECT - With the front index plate of 24 stages are possible 2, 3, 4, 6, 8, 12 and 24 direct divisions. Other direct indexing platesup to 36 divisions can be supplied as extra equipment.SIMPLE - Indirect indexing can be carried out with the help of dividing plate with holes on both sides being obtainable all divisionsfrom 2 to 50 and a great number up to 490.DIFFERENTIAL - The differential indexing is possible in any number from 2 to 500 divisions including prime numbers, by meansof the dividing plate combined with the gears train.SPIRAL MILLING - Spiral Milling can be performed by transmitting the table feed of the universal milling machine to the drivingspindle of the Dividing Head by properly chosen change gears.


Indexing Units Criterion Rotary Tables

DR 150

DIU Indexing unit

SPECIFICATIONSMODEL DR-150

Table diameter mm 250Height to the centre (Tables in vertical position) mm 150Working position Horizontal/VerticalReference slide guide mm 16Number of direct divisions 2-3-4-6-8-12-24

ChuckmmNet weight Kg 70

DR-150 High Quality Super Spacer Combines the advantages of the simple indexing by means of 24 divisions plate, tempered and ground, and indirect indexing

by using the worm shaft and the worm wheel mechanism. Worm gear ratio 1:90. Working position: horizontal vertical. 24 position master index plate and 6 guide plates 2-3-4-6-8 and 12 divisions assure positive and extremely rapid direct

indexing.

Diameter 200Central hole 55

NOTE: Standard equipment: Face plate with T

slots 250mm diameter (10), 3 jaw chuck200mm diameter (8), six guide plates 2-3-4-6-8 and 12 divisions, table rotation leverfor direct divisions, Allen key set andinstruction book.

Optional equipment: 3 dividing plates andhandle, plate 1 for 15-18-21-24-27-31-34-39-43-49 divisions, plate 2 for 16-19-22-25-28-32-37-41-46 divisions, plate 3 for17-20-23-26-29-33-38-44-47 divisions,and adjustable tailstock to the centreheight.

CRITERION Simple Horizontal and Vertical Indexing UnitWith 24 position index plate with 2, 3, 4, 6, 8, 12 and 24 positions. Maximum permissable error between spaces on index plate is 2 minutes of arc.Price includes a 3 jaw precision all steel self-centering chuck.

SPECIFICATIONSMODEL 160/6 200/8 250/10

Centre height mm 125 160 250Hole through spindle mm 20 30 40Weight kg 38 67 113Code DIU/160 DIU/200 DIU/250Tailstocks to special order DIU/160T DIU/200T DIU/250T

Features:The work table is graduated 360 degrees around its circumference and is driven by aprecision Worm and Gear providing a 90:1 reduction ratio.One turn of the handle moves the table through 4 degrees. The dial is graduated indivisions of 1 min. and the vernier scale allows readings down to 10 seconds.The worm is hardened and precision ground. Both the upper and lower surfaces areprecision ground.

SPECIFICATIONSMODEL Table Base Dimension Bolt slots Centre Worm Weight

D H A B K sleeve Gear ratio Kgs

STD/RT6 150 92 220 160 18 MT-2 12.5STD/RT8 200 120 310 225 18 MT-3 31.0STD/RT10 250 120 320 280 18 MT-3 90 : 1 48.5STD/RT12 300 140 410 325 18 MT-4 77.0STD/RT14 350 140 460 380 18 MT-4 98STD/RT16 400 140 510 435 18 MT-5 130


Compound Tables Magnetic Chucks & Bases

430 XY

XY2 AXIS MOVEMENT

CRITERION X/Y HIGH QUALITYCOMPOUND TABLES

Mod. 430 XY

1 SENSITIVITY DEVICE2 HANDWHEEL WITH SAFETY UNIT3 COOLANT BOX on MOD. 430/600/800/10004 GUIDES LUBRICATION5 CHIPS PROTECTION, PVC6 GUIDES AND SPINDLE PROTECTION

1 2 3 4 5 6

SPECIFICATIONSMODEL TABLE STROKE HEIGHT BASE T SLOTS HAND PITCH

WHEELA B X Y C D E G H No F I J K M N P mm mm Kg. Kg.

240 XY 240 190 120 140 113 155 195 72 127 3 12 22 7 10 100 9 62 4 0.05 20 55 575340 XY 340 190 220 140 113 155 195 72 127 3 12 22 7 10 100 9 62 4 0.05 25 105 800430 XY 430 240 280 180 120 190 260 72 127 3 12 22 10 10 140 11 70 4 0.05 40 270 1000600 XY 600 240 400 180 120 190 260 72 127 3 12 22 10 10 140 11 70 4 0.05 52 270 1100800 XY 800 280 500 250 144 240 290 72 127 3 12 22 10 10 184 11 80 4 0.05 93 290 13501000 XY 1000 280 700 250 144 240 290 72 127 3 12 22 10 10 184 11 80 4 0.05 95 290 1350

CRITERION STD X/Y Compound Tables

MODEL 708Table 8x8, movement 5x5. Complete with tee slots andvice clamps. Overall height 61/2 . Weight 20kg CTAB/708

MODEL 732Table 12x6, movement 8x4_. With 4 tee slots, 1longitudinal, 3 cross. Overall height 4 3/8 . Weight 18kgCTAB/732

MODEL 707Table 12x8, movement 8x8. With 2 longitudinal tee slots.Overall height 51/2. Weight 44kg CTAB/707

MODEL 707ATable 12x12, movement 8x8. With 3 tee slots, 1 cross, 2longitudinal. Overall height 51/2. Weight 44kgCTAB/707A

CTAB/707A Table

MODEL A

MB-BV MAGB

SPECIFICATIONSSize Inch (approx) Code Weight250x150mm 10x6 MGNCHK/1/CP 17kg300x150mm 12x6 MGNCHK/2/CP 20kg350x150mm 14x6 MGNCHK/3/CP 23kg450x150mm 18x6 MGNCHK/4/CP 32kg

400x200mm 16x8 MGNCHK/5/CP 38kg450x200mm 18x8 MGNCHK/6/CP 42kg500x200mm 20x8 MGNCHK/7/CP 50kg600x200mm 24x8 MGNCHK/8/CP 75kg800x200mm 32x8 MGNCHK/9/CP 104kg

500x250mm 20x10 MGNCHK/10/CP 75kg600x250mm 24x10 MGNCHK/11/CP 89kg750x250mm 30x10 MGNCHK/12/CP 100kg1000x250mm 40x10 MGNCHK/13/CP 142kg

600x300mm 24x12 MGNCHK/14/CP 115kg800x300mm 32x12 MGNCHK/15/CP 147kg900x300mm 36x12 MGNCHK/16/CP 168kg

Ceramic - Close Pole

SPECIFICATIONSSize Inch (approx) Code Weight100x65mm 4x21/2 MGNCHK/1/FP 4kg

150x100mm 6x4 MGNCHK/2/FP 8kg200x100mm 8x4 MGNCHK/3/FP 11kg

250x150mm 10x6 MGNCHK/4/FP 17kg350x150mm 14x6 MGNCHK/5/FP 21kg450x150mm 18x6 MGNCHK/6/FP 26kg

600x200mm 24x8 MGNCHK/7/FP 57kg

Ceramic - Fine Pole(For very small components)

(OTHER SIZES ON APPLICATION)

WE CAN ALSO SUPPLY: CIRCULAR MAGNETIC CHUCKS, COMPOUND MAGNETIC SINE TABLES

MAGNETIC BASES

CRITERION Magnetic BasesType MB-BV

With on/off lever release.

Base is provided with vee for securing to round surfaces.

With universal holding rod with unique fine adjustment facility clamp.

MB-BV/MAGB

Criterion Steel Parallels available on request

Magnetic Bases

Magnetic Chucks


Lathe Centres Vices and Feed Units

MK II TANK

Lathe CentresCRITERIONHigh Speed Live Centres

No. 2 (2MT shank) LIV/CEN2No. 3 (3MT shank) LIV/CEN3No. 4 HD (4MT shank) LIV/CEN4No. 5 HD (5MT shank) LIV/CEN5

CRITERION Tapping AttachmentsWith auto reverse and morse taper arbors

AUTO REVERSE

STD RANGEModel Capacity Morse taperK1MT2 3 to 6.5mm (1/16 to 1/4) 2SPR RANGEK13/1 6 to 15mm (1/4 to 5/8) 2K19/2 8 to 20mm (5/16 to 3/4) 3

BRITISH MADE

WEE SCOT Coolant Pumps Mk IIFor Lathes, Drilling and Tapping Machines.WEE SCOT Coolant Pumps Mk IIIFor Radial Drills and medium size Grinding Machines.

K13/1

Tapping Attachments

Coolant Pumps

SPECIFICATIONS MODEL MK II MK IIICapacity per minute 3 1/2 gallons 6 2/3 gallonsCapacity per hour at 6 ft head 200 gallons 400 gallonsCapacity litres per minute 151 at 1.5m 251 at 2mHP 1/40 1/10Immersion depth 6 1/4 6 1/4 Prices 1 phase WSMK2/1PH -

3 phase WSMK2/3PH WSMK3/3PHChrome stand pipe, mounting block and 6 length of polythene tube WS/SP WS/SPTank only MK2TANK MK2TANKWeight without tank 3kg 3.5kg

with tank 10kg 10.5kg

Priced separately Pump Chrome Standpipe & Tube Tank

SPECIFICATIONS

MODEL E A B H R S A B H1 H2 G1 G2 WEIGHTK100 100 267 106 75 65 295 160 114 30 25 10 10 10kgK125 125 340 130 99 80 400 210 155 38 23 10 10 16kgK150 150 421 160 105 114 462 245 175 40 40 13 13 26kgK200 200 576 215 144 150 620 340 230 58 45 17 17 52kg

K SERIES VICES

X,Y,Z AXIS POWER FEED

SPECIFICATIONS MODEL WEIGHTPFX 6.5kgPFY 6.5kgPFZ 6.5kg

FEATURES Electrical relay protects against damage caused by power failure 110 V with manual reset

SPECIFICATIONS Speed range 0-200 rpm Torque rating 650lbs / in


Permanent Lifting Magnets

NEO HV SERIES

Tremendous lifting capacity Increased airgap capability Suitable for flat or round material Extremely low dead weight

APPLICATIONS: In the workshop to load & unload machine tools At construction sites to lift plates & structurals In the warehouse to handle plate & bar stock

NEO HV SERIES Magnet provided with lifting arm for turning workpieces through 90 Very convenient for loading and unloading of horizontal machining centres and lathes Magnet is adjustable to suit a range of diameters or widths Lifting arm can be retrofitted to existing NEO magnets

* Nominal lift capacityincludes a safety factor ofat least 3.Capacity varies withworkpiece material,thickness and surfacequality.

** Tested on a ground, 50mmthick, med steel plate.

SPECIFICATIONSMODEL NEO-HV 250 NEO-HV 500

Nominal* lift capacity Flat material kg 250 500Tested** Break-away force daN 800 1600Workpiece range mm 300 - 800 300 - 1000Min. workpiece thickness mm 4 6Length x width mm 958 x 210 1158 x 275Height mm 255 255Mass kg 27 38

SPECIFICATIONSMODEL NEO 125 NEO 250 NEO 500 NEO 1000 NEO 2000

Nominal* lift capacityFlat material kg 125 250 500 1000 2000Round material kg 60 125 250 500 1000Tested**Break-away force daN 400 800 1600 3200 6000O min/max mm 50/100 60/200 65/270 100/300 150/350Length mm 95 151 248 316 480Width mm 60 100 120 148 165Height mm 110 168 168 216 261Mass kg 3 10 19 36 90

* Nominal lift capacity includes a safety factor of at least 3.Capacity varies with workpiece material, thickness and surface quality.

** Tested on a ground, 50mm thick, med steel plate.

NEO 500

Permanent Lifting Magnets


PI MODEL

PHVD MODEL

CRITERION MECAHigh Quality Horizontal and Vertical Rotary Dividing Tables

PHVD MODELS

PHVD 160 (6) PHVD/160PHVD 200 (8) PHVD/200PHVD 250 (10) PHVD/250PHVD 320 (121/2) PHVD/320PHVD 400 (16) PHVD/400PHVD 500 (20) PHVD/500

PHVD MODELS WITH TAILSTOCK

PHVDT 160 (6) PHVDT/160PHVDT 200 (8) PHVDT/200PHVDT 250 (10) PHVDT/250PHVDT 320 (121/2) PHVDT/320PHVDT 400 (16) PHVDT/400PHVDT 500 (20) PHVDT/500

CRITERION MECARotary Tilting Tables 0-90

2 models: 250mm (10) and 320mm (13) available with or without tailstock.

MODEL

PI250 (10) PI/250PI250T (10) with tailstock PI/250TPI320 (13) PI/320PI320T (13) with tailstock PI/320TPI400 (16) PI/320PI400T (16) with tailstock PI/400T

Rotary Tables Notes

S c o t U r q u h a r t52

Notes

catalogo kitchen walker.pdf

Documents

Transcript of catalogo kitchen walker.pdf