54 Order by Phone: 800.444.1508 / 740.548.7298 Order by Fax: 800.255.5314 / 740. 548. 5314

SAMPLE PROBES SAMPLE DIVIDERS

Sampling Probes are useful for sampling seed, grain, and other granular materials. Shorter length probes are for

sampling from trucks, drums, bins, stockpiles; longer ones are for barges, rail cars, large trucks and hoppers.

are seamless con-struction with durable points. Inner tube is rotated to open/close sampling holes. Probes with partitions between holes have closed-end handle, and pockets are emp-tied individually. Those without partitions have open-ended handle for convenience of emptying total sample. Partition type is USDA approved for grain sampling. GP-16 meets ASTM C 183 and AASHTO T 127 for bulk sampling of hydraulic cement. GP-25 Spiral Probe has offset inner tube openings that open in sequence from bottom to top as the probe is rotated. Smaller diameters may be used for in-bag sampling. Use stainless steel probe for foods, pharmaceuticals, fertilizers.

are useful for fertilizers, foods, pharmaceuticals, etc. GP-80 for flour and similar materials has solid wooden handle, and the outside diameter tapers from 1—11/16in (24.5—17.5mm) at the end. Slot width is 1/2in (12.7mm). GP-82 fertilizer tube has an open-end handle with score marks at 28 and 31in (711 and 787mm) from the tip.

are suitable for corrosive materials as well as ores, seeds, grains, in-dustrial minerals, and food stuffs. The devices extract samples with grain size up to 0.2in (5mm). Sample volume is 28.5in³ (0.47L) for the GP-200 and 10.7in³ (0.18L) for the GP-210. Sampler consists of two concentric tubes with one side cut away. The sampler is inserted with the slot open, then handles are rotated to cut sample and close chamber. The sampler can be inverted to pour material from the handle. Tubes separate completely for cleaning.

has three partitioned cells to collect 9cc samples of powders, pellets, and other bulk granular materials from drums, bags, bins, or stockpiles. The sampler is inserted and the "T" handle is rotated one-half turn to collect samples through the 3x0.4in (76x10mm) openings. After closing the ports, samples representing three separate zones are easily recovered for inspection. Made of anodized aluminum with sharp stainless steel point.

is designed especially to sample fine powders that tend to compact. Ideal for powdered metals and chemicals. Double-tube con-struction, 1in O.D.x39in (25.4x 991mm). Thirteen openings with partitions; inner tube rotates to close openings for removal. An auger vane on bottom 13in (330mm) of outer tube, and a "T" handle on top aids augering.

are nickel-plated steel, tapered to a point with a single large opening for sampling granular material through bags. Sample can be poured through hollow handle.

GP-12 40 (1,020) 1-3/8 Extruded 6/No 7 (3)GP-14 50 (1,270) 1-3/8 Brass with 8/No 8 (4)GP-16 63 (1,600) 1-3/8 Cast 10/No 11 (5)GP-22 63 (1,600) 1-3/8 Bronze 10/Yes 11 (5)GP-24 63 (1,600) 1-3/8 Point 11/Yes 11 (5)GP-25 62 (1,575) 1-3/8 10/No 11 (5)GP-29 72 (1,829) 1-3/8 12/Yes 12 (5)GP-29A 72 (1,829) 1-3/8 12/No 12 (5) GP-68A 96 (2,438) 1-3/8 16/No 16 (7)GP-70A 120 (3,048) 1-3/8 20/No 20 (9)

GP-4 18 (457) 1/2 Nickel- 5/No 3 (1)GP-5 30 (762) 1/2 Plated 9/No 5 (2)GP-6 39 (991) 7/8 Brass 6/No 7 (3)

GP-6S 39 (991) 7/8 304 6/No 7 (3) Stainless

GP-80 34 (864) 11/16 Stainless 1/No 2 (1)GP-82 36.5 (927) 7/8 Stainless 1/No 3 (1)

GP-200 48 (1,219) 1.3 Stainless 1/No 44 (20) GP-210 18 (457) 1.3 Stainless 1/No 18 (8)

GP-8 22 (559) 3/4 Aluminum 3/Yes 7 (3) & Stainless

GP-118 42.5 (1,080) 1 Chrome- 13/Yes 9 (4) Plated Steel

GP-106 6 (152) 1/2 Nickel 1/No 2 (1)GP-112 12 (305) 1 Plated 1/No 3 (1) Steel