CATALOG The Evolution of Integrated Video Switching … Evolution of Integrated Video Switching and...

CATALOG

The Evolution of Integrated Video Switching and Transport Technology

KEY FACTS:

• The MD8000 suite of products is an adaptable, affordable and flexible solution for transporting uncompressed or compressed 4K, 3G, HD-SDI, SD-SDI and DVB-ASI video protocols.• The MD8000 solutions readily adapt to a wide range of core network technologies, which make the MD8000 system the idea deal choice for current and future media networking needs of broadcasters, telecoms, and enterprises.• The MD8000 system is scalable and modular, thus the configuration of the system is matched to the demands of a specific event, production, or content delivery requirement.• The MD8000 is a transport platform with offers guaranteed Quality of Service due to its robust redundancy with a hitless operation, low-latency, bi- directional operation, and ability to operate with a variety of compression schemes.• Media Links is helping to bridge the gap between traditional broadcast and IP transport of content. Operating as a pioneer at the forefront of technological innovations and advancements, Media Links provides a standards-based product suite that enables the adoption of media signals to telecom standards.

The MD8000 is a next-generation media networking system that provides an unmatched level of flexibility and signal integrity for all types of media including video, audio and file/data transport applications compatible with widely available network topologies.

By combining a wide variety of signal and network interfaces with an integrated switching fabric, all based on Ethernet/IP the MD8000 goes beyond what has been possible before today. Through the use of an innovative architecture, coupled with extensive development and deployment experience, the MD8000 is able to provide an unprecedented level of performance.

This document provides an overview of the main elements of the MD8000’s design philosophy and describes a number of key features that respond to the challenges associated with building broadcaster’s and service provider’s next generation media networks.

MD8000 PLATFORM

CATALOG

EVOLUTION OF THE MD8000 PRODUCT LINE

First introduced in 2004, the MD6000 product line preceded the MD8000. Media Links has successfully deployed several MD6000 systems worldwide for a number of high profile, high value events. These include the 2006 FIFA™ World Cup in Germany and the 2006 Asian Games in Doha, Qatar. In both cases, MD6000 units were used extensively throughout the contribution networks to provide flawless, error-free transport of live video signals that were provided to broadcasters and audiences around the world.

Starting with many of the key technologies that were developed and extensively field-proven in the MD6000, the MD8000 has been designed to deliver a significantly expanded range of features to increase both flexibility and performance.

Chief among these is the migration to an integrated switching and transport multiplexing architecture, which gives network designers a much greater range of options for system layout. Each shelf in the MD8000 product line can function as a simple multiplexer or as an advanced switch.

As a multiplexer the MD8000 combines video, audio, telephony and file based/data signals into one or more high-speed optical links. As an advanced switch, the MD8000 can be configured as a multi-service switch to allow individual services to be extracted from incoming signals, distributed to one or more outbound signals, or delivered directly out of the shelf in their native video or other formats. In fact, because of the MD8000’s integrated ETHERNET signal routing fabric, both multiplexing and switching can be combined in every shelf for maximum flexibility and efficiency.

MD6000 systems pioneered the use of IP/ETHERNET encapsulation technology for error detection / correction and lossless/hitless protection switching; however, the transport interfaces were limited to POS SONET/SDH.

As long-haul networking technology has evolved, there is an increasing need to connect directly to native Ethernet/IP networks. The MD8000 systems address this need by offering both native Ethernet and native SDH/SONET network interfaces in a single, flexible architecture. Unique capability allows installation of both Ethernet and SONET trunk interfaces within a signal shelf and switching between them.

Technology for the MD8000 network interface includes GFP for SONET/SDH links with OC-3/STM-1, OC12/STM-4 and OC48/STM16 interfaces. For higher speed SONET/SDH interfaces 10Gb WAN Phy is utilized. Native Ethernet interfaces include 1GbE and 10GbE LAN Phy.

Additionally, the MD8000 includes a wide variety of user interface signals including: SD-SDI, HD-SDI, DVB-ASI, AES audio, 10/100/1000BT Ethernet, E1/T1 and OC-3/STM-1 with both copper and fiber interfaces through modular rear connector panels.

The MD8000 also allows integrated processing capabilities including JPEG2000 and H.264 encoding/decoding as well as frame synchronization.

CATALOG

SIGNIFICANT IMPROVEMENTS

The opportunity to utilize newly available technology to enhance product performance combined with the evolution of long-haul networking technology fostered the initiative to develop the MD8000 product line. Here are some of the specific improvements that are characterized in the new Media Links platform:

1. Many new long-haul, multiple-wavelength transport links have been optimized to use native IP/ETHERNET transport. This has resulted in significant cost reductions for carriers, and significant increases in operational efficiency, particularly for native IP/ETHERNET services. To fully capitalize on these developments, the MD8000 must interoperate successfully in this environment. MD8000 systems can use 1 Gigabit and 10 Gigabit LAN Ethernet interfaces as well as 10Gb WAN to take advantage of this flexible and less expensive transport infrastructure.

2. Video and data access systems can benefit from local access and edge switching as well as native video access interfaces. The MD8000 product line integrates media encapsulation/de-encapsulation interfaces, video codecs, data interfaces and stream switching in one shelf. In many cases this can provide a compact, single chassis solution where multiple shelf solutions were needed in the past.

Figure 1. MD8000 Combined Switching, Aggregation and Access

CATALOG

3. Existing data IP routers from other suppliers, which have been engineered for a high volume of low bit rate streams, are cost-prohibitive for edge routing of high performance/bandwidth media, particularly HD video. In addition, testing has shown that these units may not provide the 100% quality of service, and low delay that broadcaster’s demand. MD8000 systems designed specifically for media offer cost effective 100% QoS, non blocking video steam and data switching similar to what legacy video/audio cross-point switchers offer.

4. Native IP / MPLS and self routing technologies present some challenges for high performance video traffic due to a number of factors. The main drawbacks include scheduling of bandwidth and a lack of native support for multicasting (thereby requiring an overlay technique). In these cases it is difficult to configure routes that ensure bandwidth is reserved for known future events (i.e. the football game this evening). The most effective method of managing these events is via a booking and scheduling management system. However, there is significant complexity in interfacing a network resource reservation management system to control a wide-area IP/MPLS network. MD8000 systems, combined with bandwidth management reservation and booking systems, can provide guaranteed service reservations as well as multi-point service distribution. (More on this later in Network Design and Implementation Section)

5. Some IP/MPLS switch fabric does not provide full bandwidth cross-point capability. This is due to the bursty nature of data services and systems have been designed where many ports share back plane bandwidth but are not capable of running simultaneously at full rate. MD8000 core switch fabric is non-blocking and full rate to allow complete utilization of all available bandwidth and has no limitations for multipoint signal distribution.

CATALOG

KEY FEATURES OF THE MD8000

1. 100% QoS

The MD8000 provides a Quality of Service level of 100%, meaning that the system is designed to have every bit of every video stream delivered intact and in the correct sequence to every destination all the time. Even when the system is fully loaded, all services will be transported without competing for resources – every video stream is managed to ensure that a complete, full bandwidth path exists from end-to-end across the entire network for the entire duration of that signal. Compare this with IP routers that have a design goal of a packet loss ratio of less than 0.1% (or if each node is heavily over-provisioned and under-loaded, perhaps 0.01%), which means that packets can be lost on every HD stream every second, and a ten second signal dropout eight times a day will not violate the router design constraints.

2. Integration with IP/ETHERNET transport systems.

No real networking system with regional or national scope can operate on a totally isolated basis, at least not economically. By integrating smoothly with existing core equipment, using standard protocols, MD8000 signals can easily coexist with other IP/ETHERNET transport equipment. (See figure 2). This can save significant amounts of expense for both equipment and network management, by avoiding the need to construct special circuits or tunnels for TDM and other specialized signal flows.

3. Core network compatibility.

As multi-national and transcontinental networks grow to meet the demands of data users around the world, the technology of choice for new installations is high-capacity IP/ETHERNET. These universal backbones can support any type of service, at a cost that is dramatically lower than earlier technologies such as SDH/SONET and PDH. The MD8000 is fully compatible with these new core networks, thereby avoiding the need to construct special overlays.

4. Native IP transport for native IP signal flows.

Avoids the headaches of translating IP services into a non-native form, and leverage the power of IP / ETHERNET to handle voice, data, video and audio services. Also, network links can be configured for specific bandwidth rates.

Figure 2. MD8000 Access Interface to Core Network

CATALOG

5. Integration with IP/ETHERNET switching systems.In most large multi-service networks, high-quality video services will only make up a portion of the overall system load. In many nodes along an end-to-end path, signals will need to be switched from one path to another, without requiring any local video inputs or outputs. At these switching nodes the service provider has the option of installing MD8000 or traditional IP/ETHERNET switching infrastructure. Generally, the MD8000 systems have an advantage where there is significant audio/video content and/or native video/audio interfaces (See figure 3)

6. Low end-to-end delay.

By avoiding the buffers, packet stores, and impediments introduced by probabilistic packet engines, the MD8000 can achieve incredible throughput on every port. Input to output delays can be measured in terms of microseconds, not hundreds of milliseconds.

7. Error detection and correction.

The MD8000 systems provide robust error detection and forward error correction which can be enabled or disabled on a per service basis. This can provide solid video performance even in degraded network conditions.

8. Lossless Hitless protection switching.

The most reliable network designs need to accommodate disasters that can happen in the real world – fiber cuts, power failures, human error, etc. That’s why the MD8000 provides completely lossless hitless protection switching on a wide variety of video and data interfaces, so that when disasters happen, your signals don’t need to suffer any interruption. Competing technologies may offer features such as “hitless”, “hot standby”, “fast re-route” and “automatic protection switching” but these services involve loss of signal/freeze frame for some duration up to and over 50 milliseconds. With lossless hitless protection switching, not a single bit of video is lost or delivered out of order, for outages lasting as little as a few milliseconds up to ones that may take weeks to repair. No other technology on the market can meet that level of performance, and no other company has as much experience with this advanced technology (See figure 4). Switching occurs between packets and the missing RTP sequenced packet is recovered from the protect path resulting in no loss of video.

Figure 3. MD8000 Media Centric Switching Meshed with IP/ETHERNET Network

CATALOG

STANDARDS BASED OPERATION

The MD8000 system is based on existing Ethernet standards as well as GFP/SONET/SDH standards. In addition, all video interfaces will be standard compliant to SMPTE’s 2022 family of video over IP standards. This includes both encapsulation and FEC. SDI, HDSDI, DVB-ASI and JPEG2000 encapsulated signals will all follow these standards.

EFFICIENT BANDWIDTH MANAGEMENT

Another key feature of the MD8000 is its ability to apportion bandwidth on any interface for specific purposes, both for current usage and for future planned usage. Several varieties of connections can be provided:

1. Video connections can be made with dedicated bandwidth at a constant bit rate, which ensures that no other applications will compete for those network resources.

2. Video connections can also be scheduled for a future time, with automatic checks made to ensure that adequate bandwidth will exist at the required time along the entire route. This prevents a current service from blocking a future scheduled event by occupying bandwidth on a limited capacity link when an alternative route could have been used instead.

3. Data connections can be made over dedicated bandwidth, with a firm upper limit on occupied bandwidth. If the data arrival rate at the input port exceeds the allocated bandwidth, then the excess data will be rejected and not be transported over the link. This is particularly useful for links over a carrier backbone that has a limit on total bandwidth. For example, if a wide area network connection is physically a Gigabit Ethernet connection, but only 500 Megabits of capacity have been purchased, the MD8000 can be configured to rate-limit a data connection over this bandwidth to ensure that the 500 Mbps limit is not exceeded.

4. Data connections can also be configured to use any bandwidth up to a user-defined limit on a port that is not occupied by other services. For example, a data port could be configured to share a 500 Mbps link with a 300 Mbps occasional video service. The data port would limit its own throughput to 200 Mbps whenever the video service was active (ensuring no possibility of overcrowding), but allowing data flows to reach 500 Mbps when the video services were inactive. This feature might be useful during preparation time for live events when large files need to be downloaded to a remote graphics server, or after the end of the event when raw footage needs to be retrieved from a remote server for archiving.

Figure 4. Lossless, hitless Switching

CATALOG

NETWORK DESIGN AND IMPLEMENTATION

There are 3 main Network Applications of MD8000 systems. The specific applications depend on the requirements and size of the network.

1. Metro or Local Private Networks

These networks are created entirely with MD8000 and Media Links compatible network equipment. These networks are primarily implemented over dark fiber or wave-lengths (See Figure 5). All switching in these networks is performed by the MD8000 layer 2 switch.

Video is switched by setting static entries in the outgoing switch port MAC table via a provisioning system or booking/scheduling system. Data is switched by setting VLAN forwarding and allowing dynamic MAC learning. All signals, data or video utilize 801.2P/Q VLAN IDs with prioritization.

The MD8000 is set as default to disable the broadcast (flooding) of multicast packets. In these networks, multicast destination MAC addresses are utilized so multiple receivers can be joined to a video stream without ever impacting the original received stream. So even for a unicast service, a multicast destination address is utilized.

Figure 5. Metro/Local Private Network

CATALOG

As mentioned above, services are classified as video (video, audio and high priority data) and low priority data. The user can set the VLAN priority of all signals; however video is always set as a higher priority than data. In each system a specific group of VLAN IDs is defined as data so the MD8000 system knows by VLAN ID if the stream is video or data. Video VLANs are not allowed to be provisioned for low priority data and visa-versa.

The MD8000 controller can then manage bandwidth on each outgoing trunk port and prohibit a user from over provisioning a trunk port with high priority traffic. Every time a video service is provisioned onto a trunk port the cumulative bandwidth is calculated. If the new service exceeds 97% of the trunk bandwidth, the new service is not allowed. Low priority data services are not calculated in the port table and allowed as best effort to pass when available bandwidth exists and can utilize the remaining headroom. Both the switch ports and trunk modules manage congestion by priority processing of high priority VLANs

2. Wide Area or Long Distance SONET/SDH Networks

These network operate in the same fashion as the private networks do however, the MD8000 switching and access equipment is connected via SONET/SDH networking equipment (See figure 6).

Since the MD8000 utilized Ethernet technology (GFP & 10Gb WAN Phy) packets are sent over the SONET or SDH network and the layer 2 switch can operate in the same way as mentioned above. 100% QoS is maintained for high priority traffic.

Figure 6. Wide Area or Long Distance Networks

CATALOG

It is important to note that booking/scheduling systems can be utilized so that the operator does not have to manually provision every link in order to get a service from one side of the country to the other. The scheduling system is initially set up to understand the bandwidth requirements of each video/audio/data service and the available bandwidth on each network link. In addition, specific links can be prioritized over others with user value setting or based on route miles. When a service is booked, the scheduling system calculates the route based on the preset rules and what bandwidth is available. At each video switching center along the route, the video stream is transitioned from an incoming trunk port to an outgoing trunk port, never transitioning back to baseband video, but staying in the Ethernet domain.

This achieves very low delay/jitter and provides very reliable service.

3. Wide Area or Long Distance IP Networks

In this case, the MD8000 serves in mostly an access capacity and core switching is handled by an IP/MPLS/ VPLS core network. The MD8000 equipment provides encapsulation and encoding/decoding functions as well as local aggregation/de-aggregation switching. The MD8000 hands of signals and receives signals from the core network (See figure 7). In these networks, QoS can be managed in two ways. The most reliable method is similar to what was used in the first two network cases. This is where the booking/scheduling system controls the signal path through both the MD8000 edge equipment and the IP routers in the core. In order for this to function, the scheduling system must have the ability to place MAC or IP entrees in the route tables of each router in the signal path. Again paths are determined based on shortest path or least hops or other customer entered value criteria. This may or may not be possible in all cases so a second case needs to be created.

A second method to manage QoS in these types of networks is by actively managing the MD8000 edge equipment and traffic engineering the core network. In this case, the core routes would need to essentially be static and communicated to the scheduling system ahead of time.

Figure 7. Wide Area or Long Distance IP Networks

CATALOG

However in this case the scheduling system has to manage multiple point to point connections (perhaps by VLAN) on a single or multiple ports, each of which go to different locations and could be different bandwidths. In the previous two network examples (1 & 2) each MD8000 port is only connected to a single other MD8000 port. However, not so in this case.

As long as the core behaves in the manor as described to the edge scheduling system, then the scheduling of bandwidth would be effective and QoS would be maintained (See figure 8). Again, if the bandwidth on a single VLAN as calculated by the scheduling system would exceed 97% of the capacity then it would not be allowed. The rule for 97% of the port capacity would also apply.

DESCRIPTION OF THE NETWORK BOOKING/SCHEDULING MANAGER

Through the use of a centralized network scheduling manager, the route for each type of signal can be directed through the system with just end point and service type selection from the user. The scheduling manager must be configured prior to use with the exact link capacities of the network and the service types that are going to be deployed.

One version of the scheduling system will be available in software form directly from Media Links; other versions can be purchased from well-known suppliers. Because of the MD8000’s deterministic switching and simple control interface, the task of interfacing the MD8000 to the scheduling system is much simpler than the task of interfacing the scheduling to a complex MPLS or IP routing systems.

Figure 8. Traffic Engineered Core and Scheduled Edge

Media Links Americas431-C Hayden Station RoadWindsor, CT 06095USAPhone: +1 860-206-9163Fax: +1 [email protected]

Media Links Australia2-12 Rokeby Street,Collingwood, VIC 3066,AustraliaPhone: +61 3-9017-0175Fax: +61 [email protected]

Media Links EMEAThremhall ParkStart Hill, Bishop’s Stortford, Herts CM22 7WEUnited KingdomPhone: +44(0)1279 [email protected] www.medialinks.com

Media Links (Headquarters)Kawasaki Tech Center 18F580-16 Horikawa-cho,Saiwai-ku, Kawasaki-shi,Kanagawa 212-0013 JapanPhone: +81 [email protected]

© 2017 Media Links. All rights reserved. Specifications subject to change without notice. Media Links and Media Defined Networking are trademarks of Media Links.

DATASHEET-MD8000-CATALOG-08-2017

CATALOG

CONCLUSION

Overall, the MD8000 offers a significant step forward in the evolution of integrated video switching and transport technology. By giving users the ability to flexibly combine 100% QoS video delivery and high-speed data transport on a single backbone, the MD8000 has become the fulfilment of many broadcasters’ goals: economical, high performance transport of all their valuable video, audio, telephony, and data signals on a single, integrated backbone.

DATASHEET

MD8000 – Chassis Overview

KEY FUNCTIONS:• Interfaces for DVB-ASI, SDI, HD-SDI, JPEG2000, E1 / T1, 10 / 100 / 1000 BaseT and Audio• Supports multicast and multiple unicast of all video and data streams• Supports SONET / SDH and IP / Ethernet Trunk interfaces

KEY FEATURES:• 100% QoS• Core SONET / SDH compatibility• Integration with IP / MPLS transport systems• Hitless / Seamless Switching• SNMP control and management

APPLICATIONS:• Carrier Class Media Networks• High Performance Studio Interconnects• Flawless Contribution Video Transport• Reliable Content Delivery System• Integrated Live, Recorded and File- Based Communications

GENERAL CHASSIS FEATURES:• 10Gb connectivity per slot• All modules are hot-swappable• Mid plane design with no active components on rear connectors• Cable management for all modules from behind• Power consumption: 30W per board, 80W per SWCNT-board• Add/Drop/Pass Capability• One to any multicast capability• Multiple Unicast for non multicast enabled networks• SFP Modules support DDS

A powerful, cost effective video and data networking solution supporting all current and future MD8000 Line and Trunk cards. Services range from low rate multiport DVB-ASI, JPEG2000 for SD/HD to uncompressed HD-SDI over 10G LAN/WAN PHY.MPTE 259M). The JPEG2000 video module is available in two different versions, a standard JPEG2000 version and a JPEG2000 2022 version which is compliant with the SMPTE 2022 standard.

The MD8000 system is based on existing Ethernet standards, as well as GFP/SONET/SDH Standards. In addition, all video interfaces are standards compliant to SMPTE’s 2022 family of video over IP standards. This includes both encapsulation and FEC. SDI, HD-SDI, DVB-ASI and JPEG2000 encapsulated signals will all follow these standards.

Multicast to multiple destination transmission is supported and in cases with non-multicast enabled networks, multiple unicasts of the same stream can be initiated provided the bandwidth of the NIC port is not exceeded.

The MD8000 family sets the stage for convergence between SONET/SDH and IP based networks with the use of the ITU-T G.7041 Generic Framing Protocol. GFP provides a gateway between Legacy SONET/SDH infrastructure and next generation IP/Ethernet networks.

3 different available Chassis types offer a cost effective configuration:

The MD8000EX Chassis [7RU] providing redundant PSU and Switch Controllers and 24 non-blocking slots of 10Gb connectivity each.• 240Gbps Non-blocking L2 Switch Fabric• All 24 slots available for either Trunk or access modules

The MD8000 Chassis [4RU] also equipable with redundant PSU and Switch Controllers having 9 non-blocking Slots of 10Gb connectivity each.• 90Gbps Non-blocking L2 Switch Fabric• 9 Slots available for access and trunk modules

The MD8000SX Chassis [2RU] with redundant PSU, single Switch Controller and 6 non-blocking Slots of 10Gb connectivity each.• 60Gbps Non-blocking L2 Switch Fabric• 6 Slots available for access and trunk modules

Local Video Access Platform




Media Links (Headquarters)Kawasaki Tech Center 18F580-16 Horikawa-cho, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0013 JapanPhone: +81 [email protected]


DATASHEET

DATASHEET-MD8000-CHASSIS-08-2017

MD8000 EX - 7 RU Chassis ORDER NUMBER ORDER CODE

24 slot user interface (7RU MD80T002 MD8000EX Chassis (EU)

24+user interface with DC power input MD80T006 MD8000EX Chassis (DC)

AC power supply MDPS0010 MD6U1500-PS (EU)

48V DC power supply MDPS0014 MD6U1000-PS (DC)

24 port x 10Gb switch module MD803004 SWCNT24-F-SD

MD8000 - 4 RU Chassis

9+3 user interface MD80T001 MD8000 Chassis (EU)

9+3 user interface with DC power input MD80T005 MD8000 Chassis (DC)

AC power supply MDPS0011 MD-4U1000-PS (EU)

48V DC power supply MDPS0015 MD-4U5000-PS (DC)

9 port x 10Gb switch module MD803003 SWCNT9-F-SD

MD8000 SX - 2 RU Chassis

6 user interface MD80T009 MD8000SX Chassis (EU)

AC power supply MDPS0016 MD-1U800-PS

ORDERING INFORMATION

MD8000 SX MD8000 MD8000 EX

DIMENSIONS 2 RU for 19” rack mountH: 3.5” / 8.89 cmW: 17.5” / 44.45 cmD: 22.0” / 55.88 cm

4 RU for 19” rack mountH: 7” / 17.78 cmW: 17.5” / 44.45 cmD: 22.0” / 55.88 cm

7 RU for 19” rack mountH: 12.25” / 31.12 cmW: 17.5” / 44.45 cmD: 22.0” / 55.88 cm

WEIGHT 33 lb. / 15 kg. 42 lb. / 19.2 kg. 60 lb. / 27 kg.

AMBIENT OPERATING TEMPERATURE

0ø C to +55ø C32ø F to 131ø F

SUBMINIATURE D External Alarm Output

POWER SUPPLY UNITS 2 slots for redundant PSU

INPUT VOLTAGE 80 to 240 VAC (50/60 Hz)

POWER CONSUMPTION 80W per SWNT-board30W per module

IP SWITCH CONTROLLER SLOTS

2 slots for redundant IP Switch Controllers (except 2 RU chassis)

1 x RJ45 10/100 BaseT for Management Connection

1 x BNC Black Burst Signals Input Cable

1 x Subminiature D External Clock Input

SPECIFICATIONS

DATASHEET

MD8000 Series - 10G LAN Trunk Module

KEY FUNCTIONS:• External optical interface to transport network• Internal electrical interface to dual MD8000 SW-CNT modules

KEY FEATURES:• XFP Optics, single or multi-mode fiber support• LAN Phy 10.3125 Gbit/s with 64B/66B encoding• Front panel LED status and error indicators, including TX/RX, link status and errors, power, temperature, maintenance mode• Efficient stream processing with Jumbo Ethernet frame support• Full QoS support, including seven priority queues, FEC, hitless switching• Optical rear connector, SC connectors• Modular Rear Panel I/O• On-board diagnostics• Available 300 meter, 10km, 40km and 80km optical reach

The 10GigE LAN Trunk Module is a single port 10 Gigabit Ethernet card that connects to the transport network via an optical interface. The optical connection is made using a small form factor pluggable transceiver (XFP) that is available in the following reaches: 300 meters, 10km, 40km and 80km. For DWDM networks, an XFP is also available with a reach up to 80km.

The 10GigE LAN Trunk Module is designed to handle jumbo Ethernet frames up to 9022 byes in length (including headers and FCS). Transmission of data to the MD8000 dual switch controllers is accomplished using a 10Gbps internal electrical interface to the chassis backplane.

Using a mid-plane chassis architecture, the 10GigE LAN Trunk Module uses a separate optical rear board to connect to the transport network.

10G LAN Trunk Module

The 10GigE LAN Trunk Module is a single port 10 Gigabit Ethernet card that connects to the transport network via an optical interface.

MD8000 - 10G LAN Trunk Module

RXTX

Stream PacketMonitoring and Control

XFP10GPHY

Formattingto 10 Gb/s

(Active)

East SW-CNT

Formattingto 10 Gb/s(Standby)

West SW-CNT

East SW-CNT

West SW-CNT

MD8000 - 10G LAN Trunk Module Block Diagram

DATASHEET

NAME CONDITION TO ILLUMINATE

IN-SRV Status Monitored

MAINTE Under Maintenance

ACT Normal Operation

ERR Board Failure Detected

POWER Board Power Voltage Low (Warning)

TEMP Board Temperature High (Warning)

LINK Sync Pattern Sensed

LOS Loss of Signal

TX/RX TX: Transmitting RX: Receiving

RXERR Receiving Error Detected

LINE1/2 SWCNT for the selected channel: 1: SWCNT#1; 2: SWCNT#2

APPLICATIONS FOR THE MD8000 - 10G LAN Trunk Card

• Carrier Class Media Networks• High Performance Studio Interconnects• Flawless Contribution Video Transport• Reliable Content Delivery Systems• Integrated Live, Recorded and File-Based Communications• Metropolitan Distribution Networks connectivity for cost-effective transport

NAME TYPE DESCRIPTION

TX SC 10 Gbps Ethernet Output

RX SC 10 Gbps Ethernet Output

Optical Rear Board Connectors

Front Panel LEDs






DATASHEET-MD8000-10G-LAN-08-2017

DATASHEET

FUNCTIONAL SPECIFICATIONS:

Item 0Gb-SR (300 m) 10Gb-LR (10km) 10Gb-ER (40 km) 10Gb-ZR (80km

PhysicalCharacteristics

Transport Media Multi mode Fiber Single mode

No. of core wires used 2 (1 for In and 1 for Out)

Connector Type SC

Optical Characteristics

Data Rate 10.3125 Mbps

Wavelength 840 – 860 nm 1260 – 1355 nm 1530 – 1565 nm

Input Level Max – 1.0 dBm + 0.5 dBm – 1.0 dBm – 7.0 dBm

Min – 9.9 dBm – 14.4 dBm – 15.8 dBm – 24.0 dBm

Output Level Max - 1.0 dBm + 0.5 dBm + 4.0 dBm + 4.0 dBm

Min – 7.3 dBm – 8.2 dBm – 4.7 dBm 0.0 dBm

MODEL ORDER NUMBER ORDER CODE

10GigE LAN Trunk Module MD802704 10 GEther-1Trunk-F(no Opt.)+JP


OPTICAL PLUG-IN (XFP)

MODEL ORDER CODE

10GbE XFP Optical Module, 850 nm, 300 m, ROHS, Digital Diagnostics XFP-850-300

10GbE, OC-192, STM-64 XFP Optical Module, 1310 nm, 10 km, ROHS, Digital Diagnostics XFP-1310-10



10GbE, OC-192, STM-64 XFP Optical Module, DWDM, 80 km XX for ITU Channel Num-ber, ROHS, Digi. Diagn.

XFP-DWDM-80-XX

DATASHEET

MD8000 Series - 10G WAN Trunk Module

KEY FUNCTIONS:• External optical interface to transport network• Internal electrical interface to dual MD8000 SW-CNT modules

KEY FEATURES:• XFP Optics, single mode fiber support• SONET SR-1, IR-2, and LR-2 and ITU SDH I-64-1, S-64.2b, and P1L1-2D2 compliant• Front panel LED status and error indicators, including TX/RX, sync, framing, power, temperature, maintenance mode• Efficient stream processing with Jumbo Ethernet frame support• Full QoS support, including seven priority queues, FEC, hitless switching• Optical rear connector, SC connectors• Modular Rear Panel I/O• On-board diagnostics• Available 10km, 40km and 80km optical reach

The 10G WAN Phy Trunk Module is a single port optical trunk card used to connect a MD8000 series device to a SONET/SDH transport network. Operating at a line rate of 10 Gb/sec, this module includes an internal 10Gb/sec electrical backplane interface that is used to communicate with the MD8000 chassis’ redundant switch controller cards.

Using a midplane chassis architecture, the 10GigE LAN Trunk Module has a separate optical rear board to connect to the transport network. A single-mode fiber XFP module with SC connectors and supporting distances up to 10km, 40km, 80km is used for optical connectivity. Optical selections are compliant with SONET SR-1, IR-2, and LR-2 and ITU SDH I-64-1, S-64.2b, and P1L1-2D2 specifications, respectively.

The 10G WAN Phy Trunk Module includes a complete set of status, error, and diagnostic LEDs and counters to simplify connectivity to SONET/SDH networks.

10G WAN Trunk Module

The 10G WAN Phy Trunk Module is a single port optical trunk card used to connect a MD8000 series device to a SONET/SDH transport network.

MD8000 - 10G WAN Trunk Module

RXTX


BackplaneInterface

XFP10GPHY

To/FromActiveSwitch

East SW-CNT

To/FromActiveSwitch

West SW-CNT

East SW-CNT

West SW-CNT

MD8000 - 10G WAN Trunk Module Block Diagram

DATASHEET








SYNC Signal Synchronized with the circuit

LOS/LOF LOS: Loss of Signal Detected LOF: Loss of Frame Detected

AIS-P/RDI-L AIS-P: Path Alarm Indication Detected RDI-L: Remote Line Defect Detected

TX/RX TX: Line Transmitting RX: Line Receiving

RXERR Line Receive Error Detected

LINE1/2 SWCNT for the selected channel: 1: SWCNT#1; 2: SWCNT#2

CLK1/2 Clock Source 1: From SWCNT #1 2: From SWCNT #2

CLK S/M Clock Mode S: Slave; M: Master

APPLICATIONS FOR THE MD8000 - 10G WAN Trunk Card

• SONET Circuit/WAN network connectivity• Carrier Class Media Networks• Flawless Contribution Video Transport• Reliable Content Delivery Systems• Integrated Live, Recorded and File-Based Communications


TX SC 10 Gbps Ethernet Output

RX SC 10 Gbps Ethernet Output


Front Panel LEDs






DATASHEET-MD8000-10G-WAN-08-2017

DATASHEET


Parameter I-64.1 (SR-1) (10 km) S-64.2b (IR-2) (40 km)

P1L1-2D2 (LR-2) (80 km)


Transport Media Single mode Fiber


Connector Type SC



Wavelength 1260 – 1355 nm 1530 – 1565 nm

Input Level Min ≤ – 11.0 dB ≤ – 14.0 dB ≤ – 24.0 dB

Output Level Max - 1.0 dBm + 2.0 dBm + 4.0 dBm

Min – 6.0 dBm – 1.0 dBm 0.0 dBm

Power Consumption 17 watts


10Gb WAN-PHY Trunk Module - w/o Optics MD802604 10GWAN-1Trunk-F(no Opt)+JP


OPTICAL PLUG-IN (XFP)

MODEL ORDER CODE




10GbE, OC-192, STM-64 XFP Optical Module, DWDM, 80 km XX for ITU Channel Num-ber, ROHS, Digital Diagnostics

XFP-DWDM-80-XX

DATASHEET

MD8000 Series - 2 Port 100/1000BT Trunk Module

KEY FUNCTIONS:• Network Interface for MD8000• User Configurable Maximum Bandwidth Limits• Compliant with 802.3 Ethernet Standards

KEY FEATURES:• Operates at 100 or 1000Mbps• Wide Range of SFP Optical Modules• Separate status/error information for ports 1 and 2• Optical and Electrical (CAT-5) Interfaces, SC connectors on optical card• Optical Range of up to 120km, multi- mode or single-mode fiber• Front panel LED status and error indicators, including link status, LOS, power, temperature, TX/RX• Jumbo Frame support, up to 9022 bytes in length, including headers and FCS• IEEE 802.3 compatible, CSMA/CD Full Duplex access method

The Dual-Port Gigabit Ethernet Trunk module provides a flexible network interface module for all MD8000 series applications. This single card provides interfaces to two separate transport networks, each of which can operate at any of the popular Ethernet interface speeds of 100 Mbit/sec or at 1000 Mbit/sec. This flexibility gives network designers the ability to create a wide range of redundant or non-redundant network architectures that comply with all applicable Ethernet signal standards.

Both electrical and optical interfaces are supported. The MD8000-2GbE-E (electrical) version includes two standard RJ-45 electrical connections that can be used for full-duplex 100 or 1000BaseT applications. The MD8000-2GbE-O (optical) units are designed to provide two independent optical Gigabit Ethernet connections. These units require one Small Form-factor Pluggable (SFP) device for each of the two interfaces, which can be independently selected for the desired optical wavelength and distance from one of four choices.

The MD8000-2GbE module can be installed in any available slot in the 4-RU MD8000 chassis, the 7-RU MD8000EX chassis, or the 2-RU MD8000SX chassis. In combination with MD8000 signal interface cards and the flexible switch/controller units, many different types of media signals can be transported over common Ethernet network infrastructures. Full system configuration and alarm reporting is available through the extensive SNMP MIB and the Media Links Network Management System (NMS).

2GbE – 2 Port 100/1000BT Trunk Module

The Dual-Port Gigabit Ethernet Trunk module provides a flexible network interface module for all MD8000 series applications.

MD8000 - 2GbE – 2 Port 100/1000BT Trunk Module

DATASHEET

APPLICATIONS FOR THE MD8000 - Two Port 100/1000BT Ethernet Trunk Module

• Compressed Video Streams via 100BaseT links• Uncompressed SD and Compressed HD Video over Gigabit Links• Direct Connections to Industry-Standard Routers and Switches• Metropolitan Distribution Network connectivity for cost-effective transport


LINE1 TX SC 10 Gbps Ethernet Output 1

LINE1 RX SC 10 Gbps Ethernet Input 1

LINE2 TX 10 Gbps Ethernet Output 2

LINE2 RX 10 Gbps Ethernet Input 2

Optical Rear Board Connectors Electrical Rear Board Connectors


LINE 1 RJ-45 1Gbps Ethernet In/Out 1

LINE 2 RJ-45 1Gbps Ethernet In/Out 2






DATASHEET-MD8000-2GbE-Trunk-08-2017

DATASHEET


Parameter -LX (10 km) -LH (40km) -LZ (80 km)


Transport Media Single mode

No. of fibers used 2 (1 for In and 1 for Out)

Connector Type SC


Data Rate 1.250 Gbps

GbE Transmission over fiber

IEEE802.3z

Wavelength 1310 nm 1550 nm

Input Level Max – 3.0 dBm – 3.0 dBm – 3.0 dBm

Min – 19.9 dBm – 20.0 dBm – 24.0 dBm

Output Level Max – 3.0 dBm + 0.0 dBm + 0.0 dBm

Min – 11.5 dBm – 4.0 dBm + 5.2 dBm

Ethernet Transmission Speed 1 Gbps

Access Method CSMA / CD Full-Duplex

GbE Transmission over twisted-pair

IEEE802.3ab

Transmission Media <1000BASE-T>, UTP CAT5e or higher

Max Cable Length 100 m

Packet Encapsulation

Network Protocol IPv4

Packet Size 1500 Bytes (Including the IP Header)


2 Port GbE Trunk Module with Optical Rear Panel w/o Optics MD802504 1GEther-2Trunk-F(no Opt.) +JP opt. Interface

2 Port GbE Trunk Module with Electrical Rear Panel MD802504 1GEther-2Trunk-F(no Opt.) +JP ele Interface


OPTICAL PLUG-IN (SFP)

MODEL ORDER CODE

1 Gb SFP Optical Module, 1310 nm, 10 km, ROHS, Digital Diagnostics SFP-1310-1G10




DATASHEET

MD8000 Series - 2 Port OC-3/STM-1 Trunk Module

KEY FUNCTIONS:• GFP Support for IP Network Integration• STS / VC concatenation for efficient network utilization

KEY FEATURES:• Pluggable SFP Optics with CWDM / DWM supported• Dual Port OC-3 / STM-1 SONET / SDH Card

APPLICATIONS:• Carrier Class Media Networks• High Performance Studio Interconnects• Flawless Contribution Video Transport• Reliable Content Delivery Systems• Integrated Live, Recorded and File- Based Communications

The two Port OC-3/STM-1 Trunk Module is ideal for connecting any of Media Links’ MD8000 devices to SONET/SDH networks at rates of 155Mbps. Using a non-blocking Layer 2 Switch Fabric, Ethernet frames from an OC-3/STM-1 Trunk Module are sent to the dual Switch Controllers (SW-CNT modules) across the chassis backplane. For route diversity, this trunk module is equipped with dual SONET/SDH interfaces.

For efficient multiplexing and easy integration with carrier IP networks, the trunk card supports the ITU G.7041 Generic Framing Procedure (GFP). Various concatenation modes are also supported, including VC4 only within SDH STS/VC concatenation modes. For SONET, the logical path can be defined as 1 x STS-3 or 3 x STS-1, delivering optimal core network utilization and multi-service termination on a single trunk port.

The two Port OC-3/STM-1 Trunk Module accepts small form factor pluggable (SFP) optics to support optical budgets of 10km, 40km, 80km and 120km. Newer SONET/SDH compatible wavelength division multiplexing technologies such as CWDM/DWDM are also fully supported.

2 Port OC-3/STM-1 Trunk Module

The two Port OC-3/STM-1 Trunk Module is ideal for connecting any of Media Links’ MD8000 devices to SONET/SDH networks at rates of 155Mbps.

MD8000 - 2 Port OC-3/STM-1 Trunk Module

DATASHEET

Optical #1OC3-2 Trunk

Optical #2

MD8000

Network(SDH/SONET)

VC4

Network(SDH/SONET)

VC4

STS1STS1STS1

STS1

STS1STS1STS1

STS1Optical #1

OC3-2 Trunk

Optical #2

MD8000

Network(SONET)

Network(SONET)

VC4

VC4

STS1

STS1

Backplane Interface

OpticalInterface

RXTX

SFP

SFP

RXTX

OC-3/STM-1Framer

ClockRecovery

ClockRecovery

OC-3/STM-1Framer

RS DecoderPort 2

Port 2Port 1

Port 1

Port 2

Port 1

RS Decoder

RS Encoder

RS Encoder

HitlessSwitch

HitlessSwitch

IPDecapsulation

IPDecapsulation

IPEncapsulation

IPEncapsulation

De-Formatfrom

10 Gb/s

EastSW-CNT

WestSW-CNT

Formatto

10 Gb/s

EastSW-CNT

Slot 12Ref TimingClock from Line In,

Local Osc, or ExternalSlot 12 or 24

Clock from Line In,Local Osc, or External

Slot 12 or 24 Slot 24Ref Timing

WestSW-CNT

De-Mux

De-Mux

Mux

FrontLEDs

Mux

MD8000 - 2 Port OC-3/STM-1 Trunk Module Application Diagrams






DATASHEET-MD8000-OC-3-Trunk-08-2017

DATASHEET


Parameter IR-1 (≤15km) LR-1 (≤40km) LR-2 (≤80km)




Connector Type SC


Data Rate 155.52 MbpS

Wavelength 1261nm ~ 1360 nm 1480 nm ~ 1580 nm


Min – 28.0 dBm – 34.0 dBm – 34.0 dBm

Output Level Max – 8.0 dBm – 5.0 dBm – 5.0 dBm

Min – 15.0 dBm 0.0 dBm 0.0 dBm

Power Consumption 23VA or less

Standards OC-3 Telcordia GR-253-CORE

STM-1 (international) ITU-T G.707

GFP ITU-T G.7041


2 Port OC-3 / STM-1 Trunk Module, w/o Optics MD802824 OC3-2Trunk+LS(no Opt.)



MODEL ORDER CODE

OC-3 / STM-1 SFP Optical Module, 1310 nm, 15 km, ROHS, Digital Diagnostics SFP-1310-155-15



DATASHEET





The two Port OC-12/STM-4 Trunk Module delivers SONET/SDH WAN connectivity to any MD8000 chassis, including the MD8000, MD8000EX, and MD8000SX. Ethernet packets are used to efficiently transfer data to/from this trunk module to the device’s redundant switch controllers over a non-blocking Layer 2 Switch Fabric. This trunk module has the capability of handling Jumbo frames (up to 9022 bytes in length including headers and FCS).

Two ports operating at 622Mbps (581.068 Mbps effective) are built into the OC-12/STM-4 Trunk Module. For improved network utilization and multi-service termination onto a single trunk port, the OC-12/STM-4 Trunk Module supports several different SONET/SDH concatenation modes, including full, four-division, port 1 full and port 2 twelve division, and port 1 twelve division and port 2 full.

The 2 Port OC-12/STM-4 Trunk Module accepts small form factor pluggable [SFP] optics to support optical budgets of 10km, 40km, 80km and 120km. To assist in SONET/SDH installations and troubleshooting, a complete set of status/diagnostic LEDs and counters are featured. Support for ITU-T G.7041, Generic Framing Procedure (GFP), permits easy IP network integration.

2 Port OC-12/STM-4 Trunk Module

The two Port OC-12/STM-4 Trunk Module delivers SONET/SDH WAN connectivity to any MD8000 chassis.


DATASHEET

Optical #1OC12-2 Trunk

Optical #2

MD8000

Network(SDH/SONET)

VC4-4c

Network(SDH/SONET)

VC4-4c

VC4VC4VC4

VC4

VC4VC4VC4

VC4Optical #1

OC12-2 Trunk

Optical #2

MD8000

Network(SONET)

Network(SONET)

VC4-4c

VC4-4c

VC4

VC4







DATASHEET


Parameter IR-1 / S-4.1 (≤15km) LR-1 / L-4.1(≤40km) LR-2 / L-4.2 (≤80km)




Connector Type SC


Data Rate 622.080 Mbps (581.068 Mbps effective)

Wavelength 1272 nm ~ 1356 nm 1280 nm ~ 1335 nn 1500 nm ~ 1580 nn


Min – 28.0 dBm – 28.0 dBm – 28.0 dBm


Min – 15.0 dBm + 2.0 dBm + 3.0 dBm


Standards OC-12 Telcordia GR-253-CORE / ITU-T G.707


GFP ITU-T G.7041


2 Port OC-12 / STM-4 Trunk Module, w/o Optics MD802914 OC12-2Trunk+STS1 (no opt)



MODEL ORDER CODE





DATASHEET





The two Port OC-48/STM-16 Trunk Module is ideal for connecting any of Media Links’ MD8000 devices to SONET/SDH networks at rates of 622Mbps (581.068 Mbps effective). Using a non-blocking Layer 2 Switch Fabric, Ethernet frames from an OC-48/STM-16 Trunk Module are sent to the dual Switch Controllers (SW-CNT modules) across the chassis backplane. For route diversity, this trunk module is equipped with dual SONET/SDH interfaces.

For efficient multiplexing and easy integration with carrier IP networks, the trunk card supports the ITU G.7041 Generic Framing Procedure (GFP). For optimal core network utilization and multi-service termination on a single trunk port, several STS/VC concatenation are supported, including STS12c x 2 Ports (SONET), VC4-4c x 2 Ports (SDH), 4 x STS3c x 2 Ports (SONET0, and 4 x VC4 x 2 ports (SDH). Additional supported modes (STS Model) include a combined mode of one port of STS12c (SONET) with the second port supporting logical paths of 12 x STS1 x 1 (SONET).

The two Port OC-3/STM-1 Trunk Module accepts small form factor pluggable (SFP) optics to support optical budgets of 10km, 40km, 80km and 120km. Newer SONET/SDH compatible wavelength division multiplexing technologies such as CWDM/DWDM are also fully supported.

2 Port OC-48/STM-16Trunk Module

The two Port OC-48/STM-16 Trunk Module is ideal for connecting any of Media Links’ MD8000 devices to SONET/SDH networks at rates of 622Mbps (581.068 Mbps effective).


DATASHEETDATASHEET

Optical #1

Optical #2

Network(SONET)

Optical #1

Optical #2

OC48 Trunk

Full Concatenation

MD8000

OC48 Trunk

MD8000

Network(SONET)

OC48 Trunk

2 Division Mode

MD8000 OC-24 Device

OC-24 Device

OC-24 Device

OC-24 Device

Optical #1Optical #2

Trunk 1

Trunk 2Optical #1Optical #2

Network(SONET)

OC48 Trunk

4 Division Mode(Single Trunk Shown)

MD8000 OC-12 Device

OC-12 Device

OC-12 Device

OC-12 Device

Optical #1Optical #2 TrunkOptical #3Optical #4







DATASHEET


Parameter IR-1 / S-16.1 (≤15km) LR-1 / L-16.1(≤40km) LR-2 / L-16.2 (≤80km)




Connector Type SC



Wavelength 1272 nm ~ 1356 nm 1280 nm ~ 1335 nn 1500 nm ~ 1580 nn


Min – 28.0 dBm – 28.0 dBm – 28.0 dBm


Min – 15.0 dBm + 2.0 dBm + 3.0 dBm


Standards OC-48 Telcordia GR-253-CORE


GFP ITU-T G.7041


2 Port OC-48 / STM-16 Trunk Module w/o Optics MD802324 OC48-2Trunk-F+LS(no opt)



MODEL ORDER CODE




DATASHEET

MD8000 Series - VIF Trunk Module

KEY FUNCTIONS:• External interface to HD/SD/DVB-ASI user circuit• Optical or Electrical interface• Transparent with Robust FEC• Hitless Path Failure Protection• Bi-Directional video

KEY FEATURES:• HD/SD/ASI in one Module• 297M Optical Interface, LC connector• 292M/250M Coax Interface, 75 ohm BNC• Tx and Rx in one Module• Up to 16 Channels of Embedded Audio• Fully managed under SNMP and the NMS system

APPLICATIONS:• Carrier Class Media Networks• High Performance Studio Interconnects• Flawless Contribution Video Transport• Reliable Content Delivery Systems• Integrated Live, Recorded and File-Based Communications NMS system

The VIF Trunk Card is a single channel module that accepts one channel of HD-SDI, SD-SDI, or DVB-ASI signal as an input, encapsulates the signal into Ethernet frames, and transfers them to the MD8000 Switch Controller (SW-CNT) modules. Robust Forward Error Control (FEC) is an option for all video circuit built using this module.

On the receive side, the VIF board accepts incoming Ethernet packets from the Switch Controller and delivers a unique video output. This incoming Ethernet stream can originate anywhere in the MD8000 network and supports HD-SDI, SD-SDI, or DVB-ASI. Signal outputs can be either coax or fiber optic connections. In addition to robust Forward Error Correction, the VIF trunk card offers Lossless/Hitless path protection switching for extremely reliable signal transport.

VIF Trunk Module

The VIF Trunk Card is a single channel module that accepts one channel of HD-SDI, SD-SDI, or DVB-ASI signal as an input, encapsulates the signal into Ethernet frames, and transfers them to the MD8000 Switch Controller (SW-CNT) modules.








CLK-IN1/2 Unused

CLK1/2 Unused

PKT-L1/2 Input stream of the selected channel 1: Packet input from Line 1 2: Packet input from Line 2

LINE1/2 SWCNT for the selected channel 1: SWCNT #1; 2: SWCNT #2

RS-F/E RS-F: Uncorrectable Error Detected RS-E: Correctable Error Detected

Hit/Man Hit: Hitless Switching mode Man: Manual Switching mode

IN-HD/SD HD: HD Input SD: SD or DVB-ASI Input

OUT-HD/SD HD: HD Output SD: SD or DVB-ASI Output

Front Panel LEDs

DATASHEETDATASHEET


MD8000 - VIF Trunk Module Block Diagram


TX LC (Optical) HD/SD/DVB Optical Output

RX LC (Optical HD/SD/DVB Optical Input

IN BNC (75ohm) HD/SD/DVB Input

ACTIVE BNC (75ohm) HD/SD/DVB Active Output

OUT1/2 BNC (75ohm) HD/SD/DVB Output

LineDriver P/S

SignalDetect

ExtractClock

PLLExtractClock

IPDecapsulation

PacketizeVideo

S/PEQO to E

O to E

VideoOpticalIn/Out

HD/SD-SDIDVB-ASI

IN

ACTIVE

(Loop-thru)

FrontLEDs

Input Processor Video Processor Video Packetizer BackplaneInterface

Formatto

10 Gb/s

East SW-CNT

West SW-CNT

East SW-CNT

West SW-CNT

De-Formatfrom

10 Gb/s

Status, Alarms, Channel Name, Data

HitlessSwitch

HitlessSwitch

OUT 1

OUT 2

RX TX

EmbedClock

RS Encodeand

Interleave

RS Decodeand

De-Interleave

IPEncapsulation






DATASHEET-MD8000-VIF-08-2017

DATASHEET

FUNCTIONAL SPECIFICATIONS:Input/Output Signal HD-SDI Format 1080i (50 Hz, 59.94 Hz, 60 Hz)

720p (50 Hz, 59.94 Hz, 60 Hz); SMPTE 292M

Embedded Audio 16CH

SD-SDI Format 625i (50 Hz), 525i (59.94 Hz); SMPTE 259M

Embedded Audio 8CH

DVB-ASI Format MPEG2-TS

Connectors Input 1x BNC

Active Output 1x BNC

Output 2x BNC

HD-SDI Input Impedance 75 ohm, unbalanced

Return Loss 15 dB or more (5 MHz – 742.5 MHz), 10 dB or more (742.5 MHz – 1.485 GHz)

Cable Length Max 100 m (at 5C-FB coax cable)

SD-SDI/DVB-AS Input Impedance 75 ohm, unbalanced

Return Loss 15 dB or more (5 MHz – 270 MHz)

Cable Length Max 200 m for SD-SDI, 100 m for DVB-ASI (at 5C-2V coax cable)

Output Active HD-SDI Signal Amplitude 800 mVp-p ± 10% (75 ohm Load)

Rise Time Less than 270 ps (at 20% – 80% Amplitude)

Fall Time Less than 270 ps (at 20% – 80% Amplitude)

Impedance 75 ohm, unbalanced

Return Loss 15 dB or more (5 MHz – 742.5 MHz) 10 dB or more (742.5 MHz – 1.485 GHz)

DC offset 0.0 V ± 0.5 V

Jitter Timing: 1 UI or less, Alignment: 0.2 UI or less

SD-SDI Signal Amplitude 800 mVp-p ± 10% (75 ohm Load)

Rise Time 0.4 – 1.5 ns (at 20% – 80% Amplitude)

Fall Time 0.4 – 1.5 ns (at 20% – 80% Amplitude)

ABS (Rise-Fall) 0.5 ns or less

Time Difference Less than 0.5 ns




Jitter Timing: 0.2 UI or less, Alignment: 0.2 UI or less


HD/SD/SDTI/DVB-ASI Bi-Directional Video Module with electrical In- & Output MD801001 VIF-1Sch-F

HD/SD/SDTI/DVB-ASI Bi-Directional Video Module with electrical and optical In- & Output MD801002 VIF-1Sch-F+Opt

DVB-ASI, HD-SDI bi-directional Video Module with 2022-1/2 MD801037 VIF-1Sch-F(2022)

DVB-ASI, HD-SDI bi-directional Video Module with 2022-1/2 w Optical Interface MD801038 VIF-1Sch-F(2022)-A


DATASHEET

1 x 10GbE, Single Port Ethernet Line Module with Hitless Data Switching

The 1 x 10GbE Ethernet line module provides 10GbE service across a single port with true hitless/zero second switching and path diversity for demanding data applications such as Remote Production/REMI.

KEY FACTS: • Compatible with MD8000 networking

equipment• True Hitless data protection using Media

Links advanced proprietary Hitless logic• Bi-directional Ethernet traffic• High throughput and low latency for

real-time applications such as remote production

• Auto or Manual resume for buffer resync

KEY FEATURES:• MTU Jumbo Frame support up to

9,026 bytes• Supports single 10GbE Ethernet port• Optical 10Gbps SFP+ interface, 10GBASE-

SR/LR/ER/ZR with full SFP statistics• 93.8% Committed Data Rate of

Tx RTP Stream • 512Kbyte FIFO buffer

APPLICATIONS: • Local access point-to-point data transfers• Lossless push-pull bi-directional

file transfers • Protected IP video transport • Remote production and remote integration• High speed / High reliability file transfers

As a line card in a MD8000 chassis, the 1 x 10GbE Ethernet module offers a single 10Gbps Ethernet port with hitless switching for uninterrupted, robust data service. The card provides bi-directional hitless switching for customer data traffic between endpoints while providing fiber trunk path diversity between those same endpoints.

The ingress 1 x 10GbE Ethernet line module encapsulates customer data into a single RTP stream at the transmitter site where resulting packets are then transported on two redundant fiber trunk paths to the receiving site.

The receiving 1 x 10GbE line card checks and aligns sequence numbers and timestamps in the RTP header on both received fiber trunk paths. It then chooses the best packet of the two received paths for de-encapsulation and egress to the customer interface. This allows the network to handle routine errors that may occur such as out-of-order packets, duplicate packets, and/or lost packets. When erred packets are detected, hitless, zero second switchover to the other fiber trunk path will automatically occur by the line module’s internal logic.

1 x 10GbE Ethernet Line Module with Hitless Switching For Data Applications

Customer Ingress Frames

Customer Egress Frames

Packet(1)

Packet(2)

Packet(3)

Segment(1-0)

Segment(2-0) 3-1(3-0)H H H

Packet(4)

H H Segment(4-1)

Segment(4-0) H H Padding

Input Packet

RTP Payload(Tx Packet)

Constant Length RTP Payload Constant Length RTP Payload Constant Length RTP Payload

Packet(1)

Packet(2)

Packet(3)

Segment(1-0)

Segment(2-0) 3-1(3-0)H H H

Packet(4)

H H Segment(4-1)

Segment(4-0) H H Padding

Output Packet

RTP Payload(Rx Packet)

Constant Length RTP Payload Constant Length RTP Payload Constant Length RTP Payload

DATASHEET

SPECIFICATIONS & SUPPORTING PARAMETERS

1 x 10GbE Customer Network Interface SpecificationsItem Description Remarks

Input/output interface Connector: 1 * SFP+ cagesMSA compliant SFP+ modules shall be used (SFF-8431, SFF-8432, and SFF-8472).

Port-1 only

Supportable interfaces 10GBASE-SR/LR/ER/ZR(depending upon the SFP+ type installed)

MTU/MRU 9,026 bytes Including FCS

Supported VLAN Tag Format IEEE 802.1Q, IEEE 802.1ad format Untagged, single VLAN tagged, double VLAN tagged

1 x 10GbE Service Specifications (port-to-SWCNT)Item Description Remarks

# of Services 1 Hitless Service per port Port-1 only

Service Description Hitless Service for any single stream of Ethernet frames (data traffic)

Port: Filtering None All Ethernet frames are transferred

Port: Ingress FIFO Size 512 Kbyte per port Shared by all the traffic classes

Port: Committed Rate 93.8 % of the Tx RTP Stream rate

System: Encapsulation Format MAC+VLAN(IEEE 802.1Q Tag)+IPv4+UDP+RTP

System: RTP Payload MGL Data Composition profile (MGL proprietary) Payload Type = 100 (0x64)

System: RTP Tx Rate Class j: 100~10,000 MbpsClass B/Class C/Single: 100~5,000 Mbps

Unit = 1Mbps

System: Transmission lines 2 Lines for Hitless protectionor 1 line (no protection)

1 x 10GbE Service Specifications (SWCNT-to-port)Item Description Remarks

# of Services 1 Hitless Service per port Port-1 only

Service Description Hitless Service for any single stream of Ethernet frames (data traffic)

System: Receive Frame Format MAC+VLAN(IEEE 802.1Q Tag)+IPv4+UDP+RTP

System: RTP Payload MGL Data Composition profile (MGL proprietary) Payload Type = 100 (0x64)

System: Transmission lines 2 Lines for Hitless protectionor 1 line (no protection)

System: Receive Filtering DMAC Address, VLAN ID, DIP Address, DUDP Port Number Configured per Line

Port: Output format Ethernet Frames

Port: Egress Rate Control None Equal to the Ingress rate at the transmitter

Line Switching: Control Auto Switching between Line1 and Line2Manually configured to a given Line

MGL Proprietary






DATASHEET

1 x 10GbE General SpecificationsItem Description Remarks

Operable chassis All MD8000 series chassis MD8000, MD8000EX, or MD8000SX

Board structure Front + Rear cards

External dimensions Front board: 17 mm (W) * 113 mm (H) * 367 mm (D)Rear board: 41 mm (W) * 96 mm (H) * 126 mm (D)

Front board occupies a 1-slot width.Rear board occupies either a 1-slot width (SFPx4port) or a 2-slot width (SFPx8port)

Weight 1 kg or less

Power consumption 33.0 W or less

Operating temperature 0 ~ 40°C (Ambient) Under the no-condensing humidity condition

Redundancy modes All MD8000 modes of operation are supported Single/Class B/Class C/Class J

Compliant with CE/CSA, NEBS Level 3

MD8000-10GbE Ethernet Line Module with front and rear panels.

Note that only Port 1 on the rear panel card is utilized in 10GbE operation in both 8 and 4 port

rear configurations

DATASHEET-1x10GbE-08-2017

4 Port Rear Panel

8 Port Rear Panel

SFP CAGE REAR PANEL PLUG-INS

(Note: All SFP modules are compliant

to MSA (INF-8074i and SFF-8472) standards.

0

F

E

D CBA

987

654321

POWER

BERV2

2

IN

-2S

TS2

IF2

0

F

E

D CB

A

987

654321

IN-SRV

MAINTE

ACT

ERR

POWERTEMPSFP LINK

LOS RXERR

TX RX

QoSTX RX

Tx PKT-L1 2

Rx PKT-L1 2

PRTCTM S

LLCF

PGEN LB

LINE

MPGbE

M S

1 2

MPGbE-8S-RMPGbE-4S-R

PO

RT

1P

OR

T 2

PO

RT

3P

OR

T 4

PO

RT

1P

OR

T 2

PO

RT

3P

OR

T 4

PO

RT

5P

OR

T 6

PO

RT

7P

OR

T 8

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

DATASHEET

4K UHD-1 Video Encoder/Decoder Card Set

MD8000 platform users can now transport 4K UHD-1 video signals across their networks.

KEY FACTS: • Compatible with MD8000 networking

equipment• Efficient J2K compression• 3840x2160 4K video resolution• Accepts four 3G-SDI video inputs, transmitted

as a single service

KEY FEATURES:• SMPTE 2022 standards compliance, including

FEC, Hitless switching, and Auto protection• Accepts two types of 4K video; Square Division

method and two sampling interleave method• Integrated 4K color bar signal generator• Configurable 400-1400 Mbps bandwidth per

4K stream• Supports audio and ancillary parameters

APPLICATIONS: • Carrier Class media networks• Flawless Contribution video transport• High performance studio interconnects• Reliable content delivery systems• Live sports production• Live, recorded, and file-based communications

To transport 4K UHD-1 video signals, the MD8000 platform utilizes the UVTX/UVRX line cards configured for JPEG 2000 compression. Four separate, correctly timed 3G-SDI video signals are required for input to the UVTX line card, which compresses via JPEG 2000 and then subsequently IP packetizes (conforming to SMPTE 2022) for transport as a single service. The UVRX card de-packetizes and decompresses the four video stream signals, presenting four correctly timed 3G-SDI video outputs. Forward error correction, hitless switching and auto-protection are all provided as part of the MD8000 transport operation.

Two 4K UHD-1 video formats are supported; Square Division and Two Sample Interleave. The Square Division format accepts four timed video inputs, each divided into separate quadrants as shown below.

Full-featured 4K UHD-1 Video Transport for MD8000 Users

Square Division Format

Full-featured 4K UHD-1 Video Transport for MD8000 Users

MD8000 platform users can now transport 4K UHD-1 video signals across their networks.

KEY FACTS:

Compatible with MD8000 networking equipment Efficient J2K compression 3840x2160 4K video resolution Accepts four 3G-SDI video inputs, transmitted as a

single service

KEY FEATURES:

SMPTE 2022 standards compliance, including FEC, Hitless switching, and Auto protection

Accepts two types of 4K video; Square Division method and two sampling interleave method

Integrated 4K color bar signal generator Configurable 400-1400 Mbps bandwidth per 4K

stream Supports audio and ancillary parameters

APPLICATIONS:

Carrier Class media networks Flawless Contribution video transport High performance studio interconnects Reliable content delivery systems Live sports production Live, recorded, and file-based communications

4K UHD-1 Video Encoder/Decoder Card Set To transport 4K UHD-1 video signals, the MD8000 platform utilizes the UVTX/UVRX line cards configured for JPEG 2000 compression. Four separate, correctly timed 3G-SDI video signals are required for input to the UVTX line card, which compresses via JPEG 2000 and then subsequently IP packetizes (conforming to SMPTE 2022) for transport as a single service. The UVRX card de-packetizes and de-compresses the four video stream signals, presenting four correctly timed 3G-SDI video outputs. Forward error correction, hitless switching and auto-protection are all provided as part of the MD8000 transport operation.

Two 4K UHD-1 video formats are supported; Square Division and Two Sample Interleave. The Square Division format accepts four timed video inputs, each divided into separate quadrants as shown below.

Square Division Format

DATASHEET

SPECIFICATIONS & SUPPORTING PARAMETERS:

Item Description Remarks

Inputs Four 3G-SDI video inputs, 3G-SDI Level-A and Level-B

Video Interfaces Optical (SFP) or Electrical (BNC Female, 75 Ohm unbalanced)

Video Formats

- 1080p/59.94 Level-A Quad link - 1080p/50 Level-A Quad link- 1080p/59.94 Level-B-xx Quad link- 1080p/50 Level-B-xx Quad link- 1080p/50 Level-B-xx Quad link

Compression Method JPEG2000 (J2K) on each input Uncompressed 4K video is not supported

IP Packet Format Compliant with the SMPTE 2022 standard, including functions such as audio and ancillary transmission, Forward Error Correction, Hitless switching and Auto protection switching

Transmission Bandwidth Configurable 400-1400 Mbps bandwidth per each 4K stream. Approximately 1.6Gbps bandwidth used to transport 4K video with 350 Mbps JPEG2000 compression, including audio, ancillary, and IP header overhead.

ID Generator Built-in 4K video color bar generator, including user-defined 16 character text string

Transmission Method VSF TR-01 compliant

Audio Encapsulation SMPTE 302M compliant

Packet Ancillary Transmission SMPTE 2038 complaint. Port 1 only supported

Protection Methods

- Forward Error Correction - Hitless Switching- Auto Protection Switching

Redundancy Supports Class B, C, and J redundant modes of operation

Outputs Four 3G-SDI video outputs, 3G-SDI Level-A and Level-B

The Two Sample Interleave format effectively contains a full image at ¼ resolution for each of the four inputs by distributing two pixel samples to each port alternatively.

SPECIFICATIONS & SUPPORTING PARAMETERS Item Description Remarks

Inputs Four 3G-SDI video inputs, 3G-SDI Level-A and Level-B Video Interfaces Optical (SFP) or Electrical (BNC Female, 75 Ohm unbalanced)

Video Formats

- 1080p/59.94 Level-A Quad link - 1080p/50 Level-A Quad link - 1080p/59.94 Level-B-xx Quad link - 1080p/50 Level-B-xx Quad link

Compression Method

JPEG2000 (J2K) on each input

Uncompressed 4K video is not supported

IP Packet Format

Compliant with the SMPTE 2022 standard, including functions such as audio and ancillary transmission, Forward Error Correction, Hitless switching and Auto protection switching

Transmission Bandwidth

Configurable 400-1400 Mbps bandwidth per each 4K stream. Approximately 1.6Gbps bandwidth used to transport 4K video with 350 Mbps JPEG2000 compression, including audio, ancillary, and IP header overhead.

ID Generator Built-in 4K video color bar generator, including user-defined 16 character text string

Transmission Method

VSF TR-01 compliant

Audio Encapsulation

SMPTE 302M compliant

Packet Ancillary Transmission

SMPTE 2038 complaint. Port 1 only supported.

Protection Methods

- Forward Error Correction - Hitless Switching - Auto Protection Switching

Redundancy Supports Class B, C, and J redundant modes of operation Outputs Four 3G-SDI video outputs, 3G-SDI Level-A and Level-B

The Two Sample Interleave format effectively contains a full image at ¼ resolution for each of the four inputs by distributing two pixel samples to each port alternatively.






DATASHEET-MD8000-4K-UHD-1-08-2017

DATASHEET

ORDERING INFORMATION:

Model Order Number Order Code

Universal 4 port Video Transmitter - Supports JPEG2000 encoding for HD-4K inputs. Available with either optical or electrical rear connector panel

MD801074-G000 MD8000-UVTX-J2K4K

Universal 4 port Video Receiver - Supports JPEG2000 decoding for HD-4K streams. Available with either optical or electrical rear connector panel

MD801075-G000 MD8000-UVRX- J2K4K

Universal 4 port Video Transmitter - Rear Card (Optical) MD807033-G000 Not Applicable

Universal 4 port Video Transmitter - Rear Card (Electrical, Coax) MD807031-G000 Not Applicable

Universal 4 port Video Receiver - Rear Card (Optical) MD807034-G000 Not Applicable

Universal 4 port Video Receiver - Rear Card (Electrical, Coax) MD807032-G000 Not Applicable


Model Order Number Order Code Universal 4 port Video Transmitter - Supports JPEG2000 encoding for HD-4K inputs. Available with either optical or electrical rear connector panel

MD801074-G000 MD8000-UVTX-J2K4K

Universal 4 port Video Receiver - Supports JPEG2000 decoding for HD-4K streams. Available with either optical or electrical rear connector panel

MD801075-G000 MD8000-UVRX- J2K4K

Universal 4 port Video Transmitter - Rear Card (Optical) MD807033-G000 Not Applicable Universal 4 port Video Transmitter - Rear Card (Electrical, Coax) MD807031-G000 Not Applicable Universal 4 port Video Receiver - Rear Card (Optical) MD807034-G000 Not Applicable Universal 4 port Video Receiver - Rear Card (Electrical, Coax) MD807032-G000 Not Applicable

UVTX J2K4 UVRX J2K4K UVTX/UVRX J2K4K UVTX/UVRX J2K4K

Change this to correct Datasheet #

DATASHEET MD8000 4K UHD-1 05-2017

UVTX J2K4 UVRX J2K4K UVTX/UVRX J2K4K UVTX/UVRX J2K4K

DATASHEET

H.264 Video Encoder/Decoder Card Set

The H.264 encoder/decoder card set is ideal for MD8000 customers needing to reduce transport network bandwidth while maintaining high video quality.

KEY FACTS: • Efficient, standards-based H.264 compression • Uses “Universal” UVTX/UVRX video cards that support

H.264, J2K, SDI, and 4K transport with appropriate firmware update

• Compatible with MD8000 networking equipment• HD-SDI, SD-SDI and DVB-ASI video support

KEY FEATURES:• Adjustable compression, 2 Mbps to 150 Mbps • Independently compresses one or two uncompressed

inputs based on selected GOP mode • Supports audio/ancillary parameter transport• SMPTE 2022 standards compliant, including FEC,

Hitless switching, and Auto protection

APPLICATIONS: • Carrier Class media networks• Flawless Contribution video transport• Reliable content delivery systems• Live sports production• Remote production

With a user-definable compression rate of 2Mbps to 150Mbps, the H.264 UVTX/UVRX card set gives customers the ability to fine tune network bandwidth vs. video quality to meet their own unique needs. The H.264 encoder operates in one of two different modes; either One GOP (Group of Pictures) or Multi-GOP modes. As part of the H.264 video compression standard, the GOP structure specifies how intra- and inter-frames are encoded. The three frame types used for encoding are I-frames (an independently coded picture), B-frames (bi-predictive coded picture), and P-frames (predictive coded picture).

One GOP encoding offers the highest video quality by using I-frame or P-frame only compression. One GOP mode can be applied independently to Ports 1 and 2 while Port 3 supports uncompressed SDI or DVB-ASI transport.

Multi-GOP encoding (Port 1 only) controls the number of frames in a GOP and can be set for One, Middle, or Long GOP sizes. Ports 2 and 3 support uncompressed SDI or DVB-ASI transport in this mode.

In addition, the H.264 line card processes up to four embedded audio groups using 16, 20, or 24 bit depth. Ancillary data, Forward Error Correction, Hitless Switching, and Auto Protection Switching are also supported.

Full-featured H.264 Compression and Transport for MD8000 Users

DATASHEET

SPECIFICATIONS & SUPPORTING PARAMETERS:


Inputs For UVTX line card, HD-SDI, SD-SDI, or DVB-ASI inputs on Ports 1, 2 and/or 3

Port 3 only supports uncompressed SD/HD or DVB-ASI transport. Port 4 is not used.

Outputs For UVRX line card, HD-SDI, SD-SDI, or DVB-ASI outputs on Ports 1, 2, and/or 3

Port 3 only supports uncompressed SD/HD or DVB-ASI transport. Port 4 is not used.

Video Interfaces Optical (SFP) or Electrical (BNC Female, 75 Ohm unbalanced)

Video Formats DVB-ASI (188 or 204 byte), SD-SDI (525 or 625), HD-SDI 720p (50 or 59.94 Hz), HD-SDI 1080i (50 or 59.94 Hz), plus Auto Selection

Compression Method MPEG-4 AVC/H.264, High 4:2:2 profile Also referred to as ISO/IEC14496-10 Advanced Video Coding

Encoder/Decoder Modes I-Frame or P-Frame-only (One GOP), Middle GOP, or Long GOP (IP, IBP, IBBP and IBBBP), Closed GOP

Middle GOP sets GOP size = 15 or 16Long GOP sets GOP size = 30 or 32

Chroma Sampling 4:2:0 or 4:2:2 HD or SD-SDI

Transmission Format SMPTE2022-6 for SDI uncompressed and DVB-ASI @270Mbps transparent transmission; or SMPTE2022-2 for SDI H.264 compressed and DVB-ASI TS-Only transmission.

Transmission Bandwidth Configurable 2 Mbps ~ 150 Mbps bandwidth per stream.

Transport Modes DVB-ASI signals can be transported in either transparent mode or TS-only mode where only effective TS packets are extracted and transmitted.

Transport Latency SDI H.264 compressed to I-Frame-only /P-Frame-only: 133ms (1080i/59.94, 720p/59.94, 525i): 160ms (1080i/50, 720p/50, 625i)

SDI uncompressed, DVB-ASI Transparent, DVB-ASI TS Only: 2ms

ID Generator Built-in SD or HD video color bar generator Supports user-defined text string up to 16 characters

Audio Encapsulation SMPTE 302M compliant; 16, 20, or 24 bit audio bit depth; up to four audio groups

Embedded audio = enabled or disabled. Lip sync is controlled within + or - 2 Ms.

Ancillary Data Packet ancillary based on SMPTE 2038 or Line ancillary (Media Links proprietary)

Protection Methods - Forward Error Correction (FEC)- Hitless Switching- Auto Protection Switching

FEC based on SMPTE2022-1 and SMPTE2022-5

Performance Monitoring Monitors DVB-ASI, packet, board voltage and temperature, and SFP performance and status

Front panel LED indicators for abnormal conditions

Redundancy Supports Single and Class B, C, and J redundant modes of operation






DATASHEET-MD8000-H.264-08-2017

DATASHEET

ORDERING INFORMATION:

Model Order Number Order Code

Universal 4 port Video Transmitter with H.264 encoding. Available with either optical or electrical rear connector panel

MD801058-G000 MD8000-UVTX-H264

Universal 4 port Video Receiver with H.264 decoding. Available with either optical or electrical rear connector panel

MD801059-G000 MD8000-UVRX-H264

Universal 4 port Video Transmitter - Rear Card (Optical) MD807033-G000 Not Applicable

Universal 4 port Video Transmitter - Rear Card (Electrical, Coax) MD807031-G000 Not Applicable

Universal 4 port Video Receiver - Rear Card (Optical) MD807034-G000 Not Applicable

Universal 4 port Video Receiver - Rear Card (Electrical, Coax) MD807032-G000 Not Applicable

UVTX H264Front Panel

UVRX H264Front Panel

UVTX/UVRX H264BNC Rear Panel (Electrical)

UVTX/UVRX H264SFP Rear Panel (Optical)

DATASHEET

8 x 1GbE, 8 Port 10/100/1000 BaseT Ethernet Line Module

The 8 x 1GbE module accepts one to eight 10/100/1000 BaseT signals, provides rate policing and VLAN tagging, and transfers them to the MD8000 SW-CNT modules.

KEY FUNCTIONS: • External interface to user circuits• Optical (LC) or Electrical (RJ-45)

interfaces via Rear Panel SFP Cage• Auto protection switchover

KEY FACTS:• Eight, 1GbE fully independent

Ethernet Circuits (Note: a 4 x 1GbE version is also available)

• Automatic Rate Negotiation• 4 Transport/Operation Modes: - Transparent - Double Tag - Tunneling - Tag Exchange (Over Write)• Input Filtering and Rate Policing to

eliminate traffic disruptions

APPLICATIONS: • LAN Extension• WAN Access Circuit • Network Management • Telemetry• File Transfer

The 8 x 1GbE module accepts one to eight 10/100/1000 BaseT signals, provides rate policing and VLAN tagging and transfers them to the MD8000-SW-CNT modules. In the receive direction, the 8 x 1GbE module accepts Ethernet packets transferred from the SW-CNT and provides one to eight unique 10/100/1000 BaseT output signals.

Eight completely independent bi-directional GbE channels ensure that data on the individual ports is kept separate, permitting operation at full wire speed rates with total isolation. Auto-Negotiation is supported on all 8 ports. In addition, customer loopback and continuity checking functionality is also provided to facilitate circuit setup and operational troubleshooting.

The 8 x 1GbE module has four encapsulation/decapsulation modes of operation: Transparent, Double Tag, Tunneling and Tag Exchange (Over Write). All modes handle packets up to Jumbo Frames (i.e. maximum of 9022 bytes in length including headers and FCS).

Input filtering and rate policing is provided on each individual Ethernet circuit to guarantee that data bursts cannot disrupt overall traffic flow. Either optical or electrical SFPs can be used on the rear panel.

A 4 x 1GbE line module (with rear panel SFP cage) is also available that accepts one to four 10/100/1000 Ethernet BaseT signals.

8 x 1GbE, 8 Port 10/100/1000 BaseT Ethernet Line Module

MD8000-1GbE-8CH/4CH Ethernet Line Module with

front and rear panels


(Note: All SFP modules are compliant

to MSA (INF-8074i and SFF-8472) standards.

0

F

E

D CBA

987

654321

POWER

BERV2

2

IN

-2S

TS2

IF2

0

F

E

D CB

A

987

654321

IN-SRV

MAINTE

ACT

ERR

POWERTEMPSFP LINK

LOS RXERR

TX RX

QoSTX RX

Tx PKT-L1 2

Rx PKT-L1 2

PRTCTM S

LLCF

PGEN LB

LINE

MPGbE

M S

1 2

4 Port Rear Panel

8 Port Rear Panel


PO

RT

1P

OR

T 2

PO

RT

3P

OR

T 4

PO

RT

1P

OR

T 2

PO

RT

3P

OR

T 4

PO

RT

5P

OR

T 6

PO

RT

7P

OR

T 8

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX


PO

RT

1P

OR

T 2

PO

RT

3P

OR

T 4

PO

RT

1P

OR

T 2

PO

RT

3P

OR

T 4

PO

RT

5P

OR

T 6

PO

RT

7P

OR

T 8

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

RX

TX

DATASHEET


Operable chassis All MD8000 series chassis MD8000, MD8000EX, or MD8000SX

Board structure Front + Rear

External dimensions Front board: 17 mm (W) * 113 mm (H) * 367 mm (D)Rear board: 41 mm (W) * 96 mm (H) * 126 mm (D) for 8 port version. (For 4 port version, 20.5mm (W) )

Front board occupies a 1-slot widthRear board occupies 2 slots for 8 port version, 1 slot for 4 port version

Weight 1 kg or less

Power consumption 33.0 W or less

Operating temperature 0 ~ 40°C (Ambient) Under the no-condensing humidity condition

Input/output interface 8 X SFP cages for 8 port version, 4 X SFP cages for 4 port version. MSA compliant SFP modules shall be used (SFF-8074i and SFF-8472). (LC connectors for optical SFPs, RJ-45 connectors for electrical SFPs.)

Supportable interfaces 1000BASE-X (IEEE 802.3z Optical);1000BASE-T (IEEE 802.3ab Electrical);100BASE-TX (IEEE 802.3u Electrical); and10BASE-T (IEEE 802.3i Electrical)

Installed modules shall meet their individual port-parameter settings

Input data rate limitation Specifiable in 1 Mbps steps

Output data rate limitation Specifiable in 1 Mbps steps

Input priority control Controllable using VLAN Priority Strict Priority

Output priority control Controllable using VLAN Priority Strict Priority

MTU/MRU 9,022 bytes

Tagging modes Transparent, Double Tag, Tunneling, and Tag Exchange (Over Write)

Transportation support function Auto Protection and LLCF

Self-test function Packet Loopback

TxRx Filter (VLAN Table) Up to 32 entries/port (Common to both Tx & Rx) To be used for Transparent, Double Tag, and Tag Exchange modes

Rx Filter (IP Filter) 2 entries/port (Line-1/Line-2) To be used for Tunneling mode

Tag Exchange Table Up to 32 entries/port (Tx/Rx separate) Usable for Tag Exchange mode

Redundancy modes All MD8000 modes of operation are supported Single/Class B/Class C/Class J

Compliant with CE/CSA, NEBS Level 3

GENERAL SPECIFICATIONS:






DATASHEET-MD8000-8x1GbE-08-2017

DATASHEET

InputQueue

InputRateCont

InputQoSCont

1GMAC(TSE)

SFP

PortMUX

DISTCont

LineSELMUX

10GMAC

10GMAC

StreamMonitor

A/DBUS

IFReg

PeripheralCont

1GbE-8Sch

XAUI 1(SWCNT1)

XAUI 2(SWCNT2)

AD BUS

x 8

x 8

Ethernet Port

Capsul TagCovert

MUX

Mon Generator

RxFilter

Mon Filter&

Checker

Output(Tx)

Input(Rx)

Port x 8

PacketLoopback

De-Capsul

TagCovert

OutputQueue

OutputRateCont

OutputQoSCont

MD8000- 1GbE-8CH Block Diagram

MD8000-1GbE-8CH SFP Cage Rear Panel Details ORDERING INFORMATION:

ETHERNET LINE MODULE COUPLED WITH SFP CAGE REAR PANEL

MODEL ORDER CODE

8 Port 10/100/1000 Front Line Module with 8 Port SFP Cage Rear Panel

MD8000-1GbE-8CH

4 Port 10/100/1000 Front Line Module with 4 Port SFP Cage Rear Panel

MD8000-1GbE-4CH


MODEL ORDER CODE

1Gb SFP Optical Module, 1310nm, 10km, ROHS, Digital Diagnostics

SFP-1310-1G10


SFP-1310-1G40


SFP-1550-1G80


SFP-1550-1G120

1Gb SFP RJ45 Electrical Module, ROHS, Digital Diagnostics

SFP-RJ45

Note: All SFP modules are compliant to MSA (INF-8074i and SFF-8472) standards.

DATASHEET

MD8000 Series - 10 GigE LAN Line Module

KEY FUNCTIONS:• External interface to user circuits• Transparent or Q in Q tunneling• Auto Protection switchover <50ms

KEY FEATURES:• VLAN Overwrite for ingress and egress streams• Single Mode XFP Optics• Supports Jumbo Frames

APPLICATIONS:• High Speed LAN Extension• Flawless Contribution Video Transport• Reliable Content Delivery Systems• High Performance Studio Interconnects• Integrated Live, Recorded and File- Based Communications

The MD8000-10GbE-1Sch LAN Line Module is a single port high capacity service card for applications where 10 Gigabit Ethernet density is required for user side data traffic. The 10GbE Line card provides efficiency for single port ingest into the MD8000 platform for flexible distribution across multiple network links.

VLAN tagging with protection switching and VLAN pass-through with static provisioning are supported for maximum flexibility in network planning. Auto-protection switching is integrated, for data traffic to automatically switch between the primary and back-up path.

VLAN Overwrite allows the VLAN tags to be changed on ingress and egress of the 10GbE line module.

The 10GigE LAN Line Module accepts small form factor pluggable optics to support optical transport of 300 meters, 10km, 40km and 80km and DWDM networks up to 80km.

10 GigE LAN Line Module

The MD8000-10GbE-1Sch LAN Line Module is a single port high capacity service card for applications where 10 Gigabit Ethernet density is required for user side data traffic.

MD8000 - 10 GigE LAN Line Module

RXTX


XFP10GPHY

Formattingto 10 Gb/s

(Active)

East SW-CNT

Formattingto 10 Gb/s(Standby)

West SW-CNT

East SW-CNT

West SW-CNT

MD8000 - 10G LAN Line Module Block Diagram






DATASHEET-MD8000-10G-LAN-Line-08-2017

DATASHEET



10 GigE LAN Line Module with Rear Panels w/o Optics MD801053 MD8000-10GbE-1Sch



MODEL ORDER CODE

10GbE XFP Optical Module, 850nm, 300m, ROHS, Digital Diagnostics XFP-850-300

10GbE, OC-192, STM-64 XFP Optical Module, 1310nm, 10 km, ROHS, Digital Diagnostics XFP-1310-10

10GbE, OC-192, STM-64 XFP Optical Module, 1550nm, 40 km, ROHS, Digital Diagnostics XFP-1550-80

10GbE, OC-192, STM-64 XFP Optical Module, DWDM, 80 kmXX for ITU Channel Number, ROHS, Digital Diagnostics

XFP-DWDM-80-XX

Item -SR (300 m) -LR (10km) -ER (40 km) ZR (80 km)


Transport Media Multi mode Fiber Single mode Fiber


Connector Type SC



Wavelength 840 – 860 nm 1260 – 1355 nm 1530 – 1565 nm

Input Level Max – 1.0 dBm + 0.5 dBm – 1.0 dBm – 7.0 dBm

Min – 9.9 dBm – 14.4 dBm – 15.8 dBm – 24.0 dBm

Output Level Max - 1.0 dBm + 0.5 dBm + 4.0 dBm + 4.0 dBm

Min – 7.3 dBm – 8.2 dBm – 4.7 dBm 0.0 dBm

DATASHEET

2GbE, 2 Port 10/100/1000 BaseT Ethernet Line Module

KEY FUNCTIONS:• External interface to 10/100 BaseT user circuits• Optical (SC connector) or Electrical (RJ- 45 connector) Interfaces• Robust Forward Error Correction (FEC)• Auto protection switchover <50ms

KEY FEATURES:• 2 Fully Independent Ethernet Circuits• Automatic Rate Negotiation• Two Modes of Operation: Transparent for Multi-point WAN Connections and Port Tagging for Point-to-point Connections with Path Failover Protection• Input Filtering and Rate Policing to Eliminate Disruptions to Video Traffic

APPLICATIONS:• LAN Extension• WAN Access Circuit• Network Management and Telemetry• File Transfer

The GbE-2ch module accepts one or two 10/100/1000 BaseT signals, provides rate policing and VLAN tagging and transfers them to the MD8000 SW-CNT modules. In the receive direction, the 2GbE module accepts Ethernet packets transferred from the SW-CNT and provides one or two unique 10/100/1000 BaseT output signals.

Two completely independent bi-directional GbE channels ensure that data on the individual ports is kept separate, permitting operation at full wire speed rates with total isolation. Both ports support Auto-Negotiation.

The GbE-2ch board has two modes of operation; transparent or port tagging mode. Both modes handle packets up to Jumbo frames (up to 9022 bytes in length including headers and FCS). Port tagging is utilized for point-to-point connections with path failover protection. Transparent mode is used for multiple point WAN connections. In addition the GbE-2ch board provides input filtering and rate policing to guarantee that data cannot impact video traffic. Either optical or electrical rear boards can be used for the GbE-2ch line module.

2GbE, 2 Port 10/100/1000 BaseT Ethernet Line Module

The GbE-2ch module accepts one or two 10/100/1000 BaseT signals, provides rate policing and VLAN tagging and transfers them to the MD8000 SW-CNT modules.

Backplane Interface

OpticalInterface

ElectricalInterface

FrontLEDs

RXTX

SFP

SFP

RXTX

Port 110M/100M/1G

Port 210M/100M/1G

EtherPhy

EtherPhy

RS DecoderPort 2

Port 1

Port 2

Port 1

RS Decoder

RS Encoder

RS Encoder

HitlessSwitch

HitlessSwitch

IPDecapsulation

IPDecapsulation

IPEncapsulation

IPEncapsulation

De-Formatfrom

10 Gb/s

EastSW-CNT

WestSW-CNT

Formatto

10 Gb/s

EastSW-CNT

WestSW-CNT

De-Mux

De-Mux

Mux

Mux

MD8000 - 2GbE, 2 Port 10/100/1000 BaseT Ethernet Line Module Block Diagram

DATASHEET


LINE 1 TX SC 10 Gbps Ethernet Output 1

LINE 1 RX SC 10 Gbps Ethernet Input 1

LINE 2 TX SC 10 Gbps Ethernet Output 2

LINE 2 RX SC 10 Gbps Ethernet Input 2

Optical Rear Board Connectors Electrical Rear Board Connectors


LINE 1 RJ45 10 Gbps Ethernet In/Out 1

LINE 2 RJ45 10 Gbps Ethernet In/Out 2






DATASHEET-MD8000-2G-2Port-Line-08-2017

DATASHEET


Item 10Gb-LX (10km) 10Gb-LH (40km) 10Gb-LZ (80km)




Connector Type SC



Wavelength 1310 nm 1550 nm


Min – 19.9 dBm – 20.0 dBm – 24.0 dBm

Output Level Max - 3.0 dBm 0.0 dBm 0.0 dBm

Min – 11.5 dBm – 4.0 dBm +5.2 dBm

Ethernet Transmission Speed 1 Gbps


Frame Structure IEEE802.3ab

Transmission Media <1000BASE-T> UTP CAT5e or higher

Transmission Coding 1000 BaseT: 8B1Q4 10/100 Base

Max. Cable Length 100m


2 Port 10/100/1000BT Line Module with Optical Rear Panel, w/o Optics MD801029 1GEther-2Sch-F(no Opt) Opt interface

2 Port 10/100/1000BT Line Module with Electrical Rear Panel MD801029 1GEther-2Sch-F(no Opt) Ele interface



MODEL ORDER CODE

1 Gb SFP Optical Module, 1310nm, 10km, ROHS, Digital Diagnostics SFP-1310-1G10




DATASHEET

2STM1-L – 2 Port STM-1/OC-3 Line Module

KEY FUNCTIONS:• External interface to STM1/OC3 user circuits• Optical Interface• Transparent with Robust FEC• Hitless Path Failure Protection

KEY FEATURES:• 2 Fully Independent STM1/OC3 Circuits• Automatic Rate Negotiation APPLICATIONS:• Telephony Network Extension• Compressed Video Transport

Compatible with both SDH and SONET networks, the two 2 port STM1/OC3 module accepts one or two STM1/OC3 signals, encapsulates them into Ethernet frames with or without robust Forward Error Correction (FEC) and transfers them to the MD8000 SW-CNT modules.

Additionally, the 2 port STM1 module accepts Ethernet packets transferred from the SW-CNT and provides one or two unique STM1/OC3 output signals.

Two completely independent bi-directional STM1/OC3 channels ensure that data on the individual ports is kept separate, permitting operation with total isolation.

Media Links Lossless Hitless fiber failover protection switching is also available for the transported STM1/OC3 signals.

2STM1-L – 2 Port STM-1/OC-3 Line Module

Compatible with both SDH and SONET networks, the two 2 port STM1/OC3 module accepts one or two STM1/OC3 signals, encapsulates them into Ethernet frames with or without robust Forward Error Correction (FEC) and transfers them to the MD8000 SW-CNT modules.

Backplane Interface

OpticalInterface

RXTX

SFP

SFP

RXTX

OC-3/STM-1Framer

ClockRecovery

ClockRecovery

OC-3/STM-1Framer

RS DecoderPort 2

Port 2Port 1

Port 1

Port 2

Port 1

RS Decoder

RS Encoder

RS Encoder

HitlessSwitch

HitlessSwitch

IPDecapsulation

IPDecapsulation

IPEncapsulation

IPEncapsulation

De-Formatfrom

10 Gb/s

EastSW-CNT

WestSW-CNT

Formatto

10 Gb/s

EastSW-CNT

Slot 12Ref TimingClock from Line In,

Local Osc, or ExternalSlot 12 or 24

Clock from Line In,Local Osc, or External

Slot 12 or 24 Slot 24Ref Timing

WestSW-CNT

De-Mux

De-Mux

Mux

FrontLEDs

Mux

MD8000 - 2STM1-L – 2 Port STM-1/OC-3 Line Module Block Diagram

DATASHEET


LINE 1 TX SC SDH/SONET Output 1

LINE 1 RX SC SDH/SONET Input 1

LINE 2 TX SC SDH/SONET Output 2

LINE 2 RX SC SDH/SONET Input 2

Rear Board Connectors








CLK-IN1/2 Clock Source Present. Receiving from: 1: SWCNT#1; 2: SWCNT#2

CLK1/2 Unused





Hitless Hitless Switching can be enabled

TX/RX TX: Signal synchronized RX: Loss of Signal detected

LOS/LOF LOS: Loss of Signal detected LOF: Loss of Frame detected

AIS-L/RDI-L AIS-L: Path Alarm Signal detected RDI-L: Remote Defect Indication detected

Front Panel LEDs




Media Links (Headquarters)Kawasaki Tech Center 18F580-16 Horikawa-cho, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0013 JapanPhone: +81 [email protected]


DATASHEET-MD8000-STM-1/OC-3-Line-08-2017

DATASHEET


Item -LX (15 km)




Connector Type SC



Wavelength 1310 nm

Input Level Max – 3.0 dBm

Min – 19.9 dBm

Output Level Max – 3.0 dBm

Min – 11.5 dBm


Dual Port STM-1 clear channel Line Card, w/o Optics MD801025 STM1-2Sch-F(no opt)



MODEL ORDER CODE

OC3 / STM1 SFP Transceiver Optics: 1310nm, 15km Optical Budget SFP1310-155-15

DATASHEET

AIF-2S – 4 Port / 2 Services AES Audio Module

KEY FUNCTIONS:• External interface to AES user circuits• Electrical Interface• Transparent connectivity with Robust FEC• Hitless Path Failure Protection

KEY FEATURES:• Two Bi-directional Services• AES Unbalanced Electrical Interface• Coax Interface, using 75 ohm BNC connectors• Tx & Rx in one Module• Low 8.6ms delay

APPLICATIONS:• Carrier Class Media Networks• High Performance Studio Interconnects• Flawless Contribution Audio Transport• Reliable Content Delivery Systems• Integrated Live, Recorded and File- Based Communications

The bi-directional AIF-2S module supports the widely deployed AES3 digital audio standard which was originally developed by the European Broadcasting Union (EBU) and the Audio Engineering Society (AES). Following the AES-3id specification, the user interface (electrical) to the AIF-2S module is via a 75-ohm coax cable. Within the MD8000 network, each AES stream can have a single or multiple unique destinations. Each AES stream consumes 4.8Mb of bandwidth.

On the transmit side, the AIF-2S module accepts two channels of AES audio, encapsulates the signal into Ethernet frames with or without Forward Error Correction (FEC), and transfers them to the MD8000 SW-CNT modules. On the receive side, the AIF-2S module accepts Ethernet packets from the MD8000 Switch Controller (SW-CNT) and provides two unique audio outputs.

To improve audio transport reliability and resiliency, the AIF-2S module supports both Forward Error Correction (FEC) and Lossless/Hitless path protection switching. The front panel of the AIF-2S module features a comprehensive set of LEDs for monitoring the status and health of incoming and outgoing audio streams.


The bi-directional AIF-2S module supports the widely deployed AES3 digital audio standard.

Input Processor Timing Processor Packetizer BackplaneInterface East SW-CNT

West SW-CNT

East SW-CNT

West SW-CNT

East SW-CNT

West SW-CNTFrontLEDs

EQ Level Detect S/P

EQ Level Detect S/PFEC

AESPacketizer

andClock

Embedder

EQ Level Detect S/P

EQ Level Detect S/P

FEC HitlessSwitch

IPDecapsulation

IPIncapsulation

Formatto

10 Gb/s

De-Formatfrom

10 Gb/s

AES IN 1

AES IN 2

AES OUT 1

AES OUT 2

Monitor

AESDe-Packetizer

andExtract Clock

PLL

MD8000 - AIF-2S – 4 Port / 2 Services AES Audio Module Block Diagram

DATASHEET


IN1 BNC (75 ohm) AES / EBU Audio Input 1

IN2 BNC (75 ohm) AES / EBU Audio Input 2

OUT1 BNC (75 ohm) AES / EBU Audio Output 1

OUT2 BNC (75 ohm) AES / EBU Audio Output 2

MON BNC (75 ohm) AES / EBU Input Monitor









CLK-IN1/2 Unused

CLK1/2 Unused



RX-F/E RX-F: Uncorrectable Error Detected RX-E: Correctable Error Detected



IN-CH Input Present at selected channel

OUT-CH Output Present at selected channel

Front Panel LEDs






DATASHEET-MD8000-AIF-2S-08-2017

DATASHEET


Input Impedance 75 Ohm, unbalanced AES-3id-1995

Return Loss 25 dB or more (0.1 MHz-6.144 MHz)

Connectors 2x BNC 75 Ohm

Output Impedance 75 Ohm, unbalanced AES-3id-1995


Voltage 1.0 +- 0.2V

DC Offset 0 +- 50 mV

Connectors 2x BNC 75 Ohm

Monitor Output Connectors BNC 75 Ohm

Delay 8.6 ms End to end with or without FCC

Bandwidth 4.8 Mb FEC Off


2-Port bi-directional AES/EBU Audio Interface Module MD801007 AIF-2Sch-F


DATASHEET


KEY FUNCTIONS:• External interface to AES user circuits• Electrical Interface• Transparent connectivity with Robust FEC• Hitless Path Failure Protection

KEY FEATURES:• 4 Channel I/O• AES 75ohm Unbalanced Interface containing four input channels and four output channels• 15 pin D-Sub connector• Tx & Rx in one Module

APPLICATIONS:• Carrier Class Media Networks• High Performance Studio Interconnects• Flawless Contribution Audio Transport• Reliable Content Delivery Systems• Integrated Live, Recorded and File- Based Communications

The bi-directional AIF-4S module transmits and receives four channels of AES audio. As a source, incoming digital audio signals delivered to the AIF-4S card are converted into Ethernet packets and sent to the MD8000 Switch Controller (SW-CNT) module for forwarding to the wide area network. In the reverse direction, received Ethernet packets containing audio information are delivered to the AIF-4S card, converted back to their native AES audio format, and delivered to the attached audio equipment.

The AIF-4S operates in one of two different modes. Mode 1 allows independent encapsulation and addressing of each AES audio stream. Single AES streams can be sent to up to 4 destinations and received from up to 4 origination points. Mode 2 is provided for multi-channel applications like 5.1 audio. The AIF-4S can be configured to group 3 AES audio channels into a single Ethernet stream. This provides phase lock and equal latency for each of the channels. In this mode of operation, a single Ethernet stream is used for 3 AES signals and a second stream for the 4th AES signal. Mode settings can be applied uniquely to the transmitted and received signals.

To improve signal transport resiliency and reliability, the AIF-4S module supports both Forward Error Correction (FEC) and Lossless/Hitless path protection switching. The front panel of the AIF-4S module includes a comprehensive set of LEDs for monitoring the status and health of incoming and outgoing audio streams.


The bi-directional AIF-4S module transmits and receives four channels of AES audio.

Input Processor Timing Processor Packetizer BackplaneInterface

East SW-CNT

West SW-CNT

East SW-CNT

West SW-CNT

East SW-CNT

West SW-CNTFrontLEDs

EQ Level Detect S/PAES IN 1


EQ Level Detect S/P

FEC

AES IN 3


AESPacketizer

andClock

Embedder

EQ Level Detect S/PAES OUT 1


EQ Level Detect S/P

FEC

AES OUT 3


Monitor

AESDe-Packetizer

andExtract Clock

PLL

HitlessSwitch

IPDecapsulation

IPEncapsulation

Formatto

10 Gb/s

De-Formatfrom

10 Gb/s

Pin 3

Pin 2

Pin 11

Pin 10

Pin 6

Pin 13

Pin 14

Pin 7

Pin 12

MD8000 - AIF-4S – 8 Port / 4 Services AES Audio Module Block Diagram

DATASHEET

NAME TYPE PIN DESCRIPTION

AES D-Sub (75 Ohm) 1 GND

2 AES / EBU Input Channel 2


4 GND

5 GND

6 AES / EBU Output Channel 2


8 GND

9 GND



12 AES / EBU Input Monitor Output



15 GND









CLK-IN1/2 Unused

CLK1/2 Unused






IN-CH Input Present at selected channel

OUT-CH Output Present at selected channel

Front Panel LEDs






DATASHEET-MD8000-AIF-4S-08-2017

DATASHEET


Input Impedance 75 Ohm, unbalanced AES-3id-1995


Connectors D-Sub

Output Impedance 75 Ohm, unbalanced AES-3id-1995


Voltage 1.0 +- 0.2V

DC Offset 0 +- 50 mV

Connectors D-Sub

Monitor Output Connectors D-Sub

Delay 8.6 ms End to end with or without FCC

Bandwidth 4.8 Mb FEC Off


4-Port bi-directional AES/EBU Audio Interface Module MD801030 AIF-4Sch-F


DATASHEET

MD8000 - E1/T1 – 8 Port E1/T1 Line Module

KEY FUNCTIONS:• External interface to E1 or T1 user circuits• Clear Channel Transport• Transparent with Robust FEC• Hitless Path Failure Protection

KEY FEATURES:• 4 Independent Circuits 2x E1 or T1• RJ45 Connector Interface, balanced• Interface Impedance: 120 ohm (E1) or 100 ohm (T1)• Line Coding: AMI or HDB3 (E1) or AMI or B8ZS (T1)• Bandwidth: 4Mbps (E1) or 3Mbps (T1)


The E1/T1 module supports both SONET and SDH standards and can be configured to provide either local E1 or T1 interfaces. Equipped with 8 local interface ports, the E1/T1 module encapsulates each pair of local transmit interfaces into Ethernet frames and transfers them to the MD8000 Switch Controller (SW-CNT) modules. In the reverse direction, incoming Ethernet streams are transferred from the SW-CNT and sent to the output connectors as E1/T1 signals. To add resiliency to the signal transport, both Forward Error Correction (FEC) and hitless switching are optional for these streams.

The E1/T1 module is a double-width module that occupies two adjacent slots in a MD8000 chassis. The module provides uni-directional control of 4/8 E1/T1 services over the WAN. Two E1/T1 services are encapsulated into a single Ethernet stream in order to minimize delay and maximize bandwidth efficiency. The paired E1/T1 signals must be connected to the same destination.

The front panel of the E1/T1 module features a comprehensive set of LEDs for monitoring the status and health of incoming and outgoing audio streams. Using SNMP, the module is also fully manageable by Media Links’ NMS systems.

E1/T1 – 8 Port E1/T1 Line Module

The E1/T1 module supports both SONET and SDH standards and can be configured to provide either local E1 or T1 interfaces.

Input Processor Timing Processor Packetizer BackplaneInterface

FrontLEDs

LD Line Monitor

RJ-45Connectors

P/S

LD Line Monitor P/S

LD Line Monitor P/S

LD Line Monitor P/S

LD Line Monitor P/S

LD Line Monitor P/S

LD Line Monitor P/S

LD Line Monitor P/S

EQ Detect S/P

EQ Detect S/P

EQ Detect S/P

EQ Detect S/P

EQ Detect S/P

EQ Detect S/P

EQ Detect S/P

EQ Detect S/P

HitlessSwitch

East SW-CNT

West SW-CNT

East SW-CNT

West SW-CNT

De-Formatfrom

10 Gb/s

Formatto

10 Gb/s

East SW-CNT

West SW-CNT

Test Generator

ClockExtractor

andPLL

E1Packetizer

andClock

Embedder

RSDecoder De-Packetization

RSEncoder

PacketDemux

PacketMux

IPEncapsulation

Variable Cable LenthBuild Out

AMI/BZ8/HDB3

MD8000 - E1/T1 – 8 Port E1/T1 Line Module Block Diagram

DATASHEET


Port 1-8 RJ45 E1 or T1 Signal Input/Output









CLK-IN1/2 Unused

CLK1/2 Unused






SYNC/LOS SYNC: Signal synchronized LOS: Loss of Signal detected

RDI/LOF RDI: Remote defect (RDI) detected LOF: Loss of Frame detected

P-AIS/AIS P-AIS: Path AIS Detected (RDI) detected AIS: Alarm Indication Signal detected

Front Panel LEDs






DATASHEET-MD8000-E1-T1-4S-8S-08-2017

DATASHEET


Parameter E1 T1

Bit Rate 2.048 Mbps +- 130 ppm 1.544 Mbps +- 200 ppm

Signal Format AMI or HDB3 line coding AMI or B8ZS line coding

Input Level 0.5 to 3V peak 12.6 to 17.9 dBm

Line Build Out 0 to 199.6m, automatic 0 to 655 ft., selectable

Impedance 120 Ohm +- 5%, balanced 100 Ohm, balanced

Ouput Level 2 to 3V peak 17.5 +- 1 dB

Pulse Waveform CCITT (ITU) G.703 ANSI T1.102

Line Build Out 0 to 199.6m, automatic 0 to 655 ft., selectable

Impedance 120 Ohm +- 5%, balanced 100 Ohm, balanced

Jitter Tollerance CCITT (ITU) G.823 Bellcore TR-TSY-000499

Delay 7 ms end to end with or without FCC 7 ms end to end with or without FCC

Bandwidth 4 Mb 3 Mb

Connector RJ45 RJ45


Dual Wide 8 Port Bi-Directional E1 (8 duplex services) - occupies 2 slots MD801005 E1/T1-8Sch-F

Single Wide 4 Port Bi-Directional E1 (4 duplex services) - occupies 1 slots MD801006 E1/T1-4Sch-F


DATASHEET

FE-4S – 4 Port 10/100 BaseT Fast Ethernet Module

KEY FUNCTIONS:• External interface to 10/100 BaseT user circuits• Electrical Interface, RJ-45 connector• Transparent data transmission with robust FEC• Hitless Path Failure Protection

KEY FEATURES:• 4 fully Independent Ethernet Circuits• UTP CAT5 Interface• Automatic Rate Negotiation


The FE-4S module is designed to transport up to four 10/100 BaseT Fast Ethernet channels across an MD8000 network. Each of these four channels operates at full wire speed rates and is completely independent and bi-directional, ensuring that data on each of the individual ports is kept separate.

As with all other MD8000 line cards, data traffic sent into this card are encapsulated into Ethernet frames and transferred to the MD8000 Switch Controller (SW-CNT) modules. Received data traffic in the reverse direction is sent by the SW-CNT, accepted at the FE-4S module, and output as 1-4 unique 10/100 BaseT output signals. For improved transport resiliency and reliability, Forward Error Correction (FEC) and hitless switching options may be used with this line module.

All four ports support Full-Duplex and Auto-Negotiation. Bandwidth for individual ports can be provisioned at the following rates: 1Mbps, 2.5Mbps, 5Mbps, 10Mbps, 20Mbps, 30Mbps, 40Mbps, 50Mbps, 75Mbps and 100Mbps. The front panel of the FE-4S module features a comprehensive set of LEDs for monitoring the status and health of incoming and outgoing channels. Using SNMP, the module is also fully manageable by Media Links’ NMS systems.

FE-4S – 4 Port 10/100 BaseT Fast Ethernet Module

The FE-4S module is designed to transport up to four 10/100 BaseT Fast Ethernet channels across an MD8000 network.

FrontLEDs

RS Decoder

RS Decoder

RS Decoder

RS Decoder IPDecapsulation

EtherPhy

EtherPhy

EtherPhy

EtherPhy

IPDecapsulation

Demux

Demux

Backplane Interface

De-Formatfrom

10 Gb/s

EastSW-CNT

WestSW-CNT

Formatto

10 Gb/s

EastSW-CNT

WestSW-CNT

HitlessSwitch

RS Encoder

RS Encoder

RS Encoder

RS Encoder

IPEncapsulation

Mux

Mux

Port 110Mb/100Mb

Port 210Mb/100Mb

Port 310Mb/100Mb

Port 410Mb/100Mb

MD8000 - FE-4S – 4 Port 10/100 BaseT Fast Ethernet Module Block Diagram

DATASHEET


Port 1-4 RJ45 Ethernet In/Out Ports10BASE-T/100BASE-TX Auto Negotiation









TEMP Link is established

100M/10M Linked at 10Mbps






TX/RX TX: Transmitting Frames RX: Receiving Frames

BUF-ERR Buffer Overlow

Front Panel LEDs






DATASHEET-MD8000-FE-4S-08-2017

DATASHEET


Ethernet Data Rate 10 Mbps / 100 Mbps


Frame Structure iEEE 802.3ab

Transmission MethodTransmission Code

10BASE-TTransmission Method = BasebandTransmission Code = Manchester100BASE-TXTransmission Method = BasebandTransmission Code = 4B/5B+MTL-3

Transmission Media 10BASE-TUTP CAT3 or higher100BASE-TXUTP CAT5 or higher

Maximum Cable Length 100 m

Encapsulation Network Protocol IP v4

Packet Size 1500 Bytes (including the IP Header)


4 Port 10/100BT Fast Ethernet Module (4 duplex service) MD801008 FE-4Sch-F


DATASHEET

MD8000 – JPEG2000 Encoder/Decoder Video Module

KEY FUNCTIONS:• Dual Purpose SD-SDI or HD-SDI JPEG2000 Transmit or Receive• Supports Uncompressed HD or SDI Direct Encapsulation• Accepts DVB-ASI Burst and Byte Mode• Hitless Switch Protection

KEY FEATURES:• High Quality, User-Selectable Compression Rates for SD-SDI and HD- SDI• Very low video/audio latency, less than 2 ms• Uncompressed Audio Transmission up to 8 Channels AES and Ancillary Data• Built-in video generator and ID generator• Forward Error Correction (FEC)• 75 ohm BNC connectors for inputs (Encoder version) and outputs (Decoder version)• Available in standard JPEG2000 and SMPTE 2022 compatible versions (ARP/ GARP, Layer 3)• Operates over IP, SONET/SDH, or Metropolitan Ethernet networks• Fully transparent

Delivering extremely high quality HD-SDI or SD-SDI video signal transport with compression, the MD8000-JPEG video module can perform either as an encoder or decoder using JPEG2000 compression, a wavelet-based compression technique. The JPEG2000 is ISO/IEC 15444-1, Annex A. compliant and uses YCrCb 4:2:2 chroma subsampling and 10 bit JPEG2000 Part 1 video coding. In addition to video, the JPEG2000 encoder can pass up to 16 uncompressed embedded audio channels along with the V-Ancillary data, time code, and audio control. JPEG2000 9/7 irreversible compression may be used for both HD-SDI and SD-SDI video signals and is visually lossless.

Hitless Protection Switching can be enabled for any of the signals transported by the MD8000-JPEG module. This technology uses two identical output streams routed over separate paths to a single destination, where any errors on one stream can be avoided by immediately switching to the other stream. Forward Error Correction and Lossless/Hitless path protection switching are also provided for extremely robust signal transport.

HD video formats include 1080i and 720p (SMPTE 292M) and SD video formats include 625i and 525i (SMPTE 259M). The JPEG2000 video module is available in two different versions, a standard JPEG2000 version and a JPEG2000 2022 version which is compliant with the SMPTE 2022 standard.

A video generator (useful in circuit turn-up, testing, and troubleshooting) and an ID generator are built into the JPEG2000 encoder module.

APPLICATIONS:• Carrier Class Media Delivery Networks• High Performance Studio Interconnects• Flawless Contribution Video-Transport• Integrated Live, Recorded and File-Based Communications• Studio-to-Studio Transfers

JPEG2000 Encoder/Decoder Video Module

The MD8000-JPEG video module can perform either as an encoder or decoder using JPEG2000 compression, a wavelet-based compression technique.

DATASHEET


IN BNC (75 Ohm) HD-SDI Input to TX

ACTIVE BNC (75 Ohm) HD-SDI Active Loop out TX

OUT 1/2 BNC (75 Ohm) HD-SDI Output from RX


Front Panel LEDs








CLK-IN1/2 BB Sync signal present. Receiving from: 1: SWCNT #1, 2: SWCNT #2

CLK1/2 BB Sync signal present. Using signal from: 1: SWCNT #1, 2: SWCNT #2






UNITY H-Phase/V-Phase are set to standard values

FS-ON FS function enables

HD/SD HD: Video input is HD-SDI SD: Video input is SD-SDI

CERR JPEG2000 Codec Error Detected

THRU Uncompressed Video Transport Mode

ENC Board is working as an Encoder

DEC Board is working as a Decoder


SD/HD JPEG2000 Video Encoder w/ uncompressed passthrough of SD/HD, DVB-ASI MD801015 JPEG2K-ENC-1Sch-F-E

SD/HD JPEG2000 Video Decoder w/ uncompressed passthrough of SD/HD, DVB-ASI MD801016 JPEG2K-DEC-1Sch-F-E

SD/HD JPEG2000 Video Encoder w/ 2022-5/6 electrical I/O, ARP/GARP (Layer 3) MD801031 J2K-ENC-1Sch-F-E(2022)

SD/HD JPEG2000 Video Decoder w/ 2022-5/6 electrical I/O, ARP/GARP (Layer 3) MD801032 J2K-DEC-1Sch-F-E(2022)

SD/HD JPEG2000 Video Encoder w/ 2022-5/6 electrical and optical I/O, ARP/GARP (Layer 3)

MD801033 J2K-ENC-1Sch-F-O(2022)

SD/HD JPEG2000 Video Decoder w/ 2022-5/6 electrical and optical I/O, ARP/GARP (Layer 3)

MD801034 J2K-DEC-1Sch-F-O(2022)


3

2

2

1

1

1

1

1

1, 2

1, 2

31. Always OFF for Encoder2. Currently not supported

3. Board can work as an Encoder or Decoder depending on the file downloaded






DATASHEET-MD8000-JPEG-08-2017

DATASHEET

FUNCTIONAL SPECIFICATIONS:Input Signal HD-SDI Format 1080i (50 Hz, 59.94 Hz, 60 Hz)

720p (50 Hz, 59.94 Hz, 60 Hz); SMPTE 292M

SD-SDI Format 625i (50 Hz), 525i (59.94 Hz); SMPTE 259M

Connectors Input, Active Output 1x BNC

Output, Active Loop 1x BNC

Input HD-SDI Return Loss 15 dB or more (5 MHz - 270 MHz)

Maximum Cable Length 200m SD-SDI, 100m DVB-ASI (at 5C-2V coax cable)

SD-SDI Impedance 75 Ohm, unbalanced

Return Loss 15 dB or more (5 MHz - 270 MHz)

Maximum Cable Length 200m SD-SDI, 100m DVB-ASI (at 5C-2V coax cable)

Output Active HD-SDI Signal Amplitude 800 mVp-p ± 10% (75 ohm Load)

Rise Time Less than 270 ps (at 20% – 80% Amplitude)

Fall Time 270 ps (at 20% – 80% Amplitude)


Return Loss 15 dB or more (5 MHz – 742.5 MHz) 10 dB or more (742.5 MHz – 1.485 GHz)


Jitter Timing: 1 UI or less, Alignment: 0.2 UI or less

SD-SDI Signal Amplitude 800 mVp-p ± 10% (75 ohm Load)

Rise Time 0.4 – 1.5 ns (at 20% – 80% Amplitude)

Fall Time 0.4 – 1.5 ns (at 20% – 80% Amplitude)


Time Difference Less than 0.5 ns




Jitter Timing: 0.2 UI or less, Alignment: 0.2 UI or less

Compression Code Stream ISO/IEC 15444-1 Annex A

Video Format YCrCb 4:2:2, 10 bit JPEG2000 Part 1

HDTV/SDTV JPEG2000 9/7 Irreversible

V-ancillary Pass-thru from 9-20 lines

Selectable AES Audio 2, 4, 6, 8 (HD-SDI) / 1, 2, 3, 4 (SD-SDI)

Audio/Video Delay Less than 2 ms

Power Consumption 18 watts

DATASHEET

UVRX-2022 (SDI) – 4 Port HD/SD/DVB-ASI Universal Video RX Module – Uncompressed Video

KEY FUNCTIONS:• External interface to SD/SDTI/DVB-ASI user circuit• Internal electrical interface to MD8000 SW-CNT modules

KEY FEATURES:• Outputs 1-4 input signals• 3G-SDI/1080P• 3D Dual-Link Supported• ETR290 Performance Monitoring• Optical (SFP) or Electrical Video Interfaces (75 ohm, unbalanced)• SMPTE 2022 1/2 & 5/6• Hitless Switching• Auto Protection Switching (per Service/ Port)• SD-SDI: 525i (59.94 Hz), 625i (50 Hz)• HD-SDI: 720p, 1080i, 1080p (50 or 59.94 Hz)

APPLICATIONS:• Carrier Class Media Networks• Flawless Contribution Video-Transport• High Performance Studio Interconnects• Reliable Content Delivery Systems• Integrated Live, Recorded and File- Based Communications

A versatile and widely deployed MD8000 line module, the UVRX-2022 board is a “Universal” four port video receiver card that is compatible with SMPTE 2022 sources. The SMPTE 2022 specification describes a standardized method of encapsulating video signals for transmission across IP transport networks. The MD8000-UVRX-2022 is compatible with the following SMPTE 2022 compliant encoder (source) line cards:•MD8000-JPEG-2022 (in uncompressed mode)•MD8000-UVTX-2022•MD8000-UVTX-J2K-2022 (in uncompressed mode)•MD8000-VIF-2022•MD8000-VTX-4S-2022

The four Ethernet streams terminating on this line module can originate anywhere in the MD8000 network. All Ethernet packets sent to and received by this module are transferred across the MD8000 backplane via the Switch Controller module (SW-CNT). DVB-ASI output signals are reconstructed from the transparent Ethernet transport of MPEG2TS. Null packets within the ASI wrapper and are re-inserted at the destination matching the original DVB-ASI input signal. The MD8000-UVRX-2022 provides TR101-ETR290 performance monitoring and real time analysis of each DVB-ASI stream.

The MD8000-UVRX-2022 provides resilient Forward Error Correction (FEC) and Lossless/Hitless path protection switching for extremely robust signal transport. Multiple format outputs supported simultaneously.

The UVRX-2022 module can output the following uncompressed signal types:•DVB-ASI•SD-SDI•SDTI•HD-SDI•HD-SDTI•3G-SDI•3D dual-link

UVRX-2022 (SDI) – 4 Port HD/SD/DVB-ASI Universal Video RX Module – Uncompressed Video

The UVRX-2022 board is a “Universal” four port video receiver card that is compatible with SMPTE 2022 sources

DATASHEETDATASHEET

MD8000 – UVRX-2022 (SDI) – 4 Port HD/SD/DVB-ASI Universal Video RX Module – Uncompressed Video

MD8000 – UVRX-2022 (SDI) – Optical Rear Board Connectors

MD8000 – UVRX-2022 (SDI) – Electrical Rear Board Connectors






DATASHEET-MD8000-UVRX-2022-08-2017

DATASHEET



Universal 4 port Video Receiver - Supports transparent HD-1080P (2 ports), HD-SDI, SD-SDI and DVB-ASI. Includes electrical rear connector panel

MD801055 MD8000-UVRX-2022-C

Universal 4 port Video Receiver - Supports transparent HD-1080P (2 ports), HD-SDI, SD-SDI and DVB-ASI. Includes rear connector panel for four SFP cages. SFP’s not included

MD801055 MD8000-UVRX-2022-O


Output SD-SDIHD-SDI

Format 625i (50 Hz), 525i (59.94 Hz); SMPTE 259M

525i, 725P, 1080i, 1080P (59.94 Hz)

Audio Full VANC/HANC

Interface SMPTE 259M, SMPTE 292M, SMPTE 424M

HD-SDTI/SDTI Interface SMPTE 305M, SMPTE 348M

DVB-ASI Format MPEG2TS

Maximum Cable Length

HD-SDI 70m

SDI 200m

DVB-ASI 100m (Belden 1694A)

All Signal Amplitude 800 mVp-p =- 10% (75 Ohm Load)

Rise Time 0.4 - 1.5 ns (at 20% - 80% amplitude)

Fall Time 0.4 - 1.5 ns (at 20% - 80% amplitude)


impedance 75 Ohm, unbalanced

Return Loss 15 dB or more (5 MHz - 270 MHz)10 dB or more (742.5 MHz - 1.485 GHz)< 10 dB (2.97 GHz)

DC Offset 0.0 V +- 0.5 V

Jitter Timing: 0.2 UI or lessAlignment: 0.2 UI or less

DATASHEET

UVTX-2022 – 4 Port HD/SD/DVB-ASI Universal Video TX Module


KEY FEATURES:• Outputs 1-4 input signals• 3G-SDI/1080P• 3D Dual-Link Supported• Auto-Sensing on Video Inputs• ETR290 Performance Monitoring• Multi-format Signal Generator with ID• Optical or Electrical Video Interfaces• SMPTE 2022 1/2 & 5/6• Interoperable with other SMPTE 2022 compatible products• Hitless Switching


The UVTX-2022 is a universal transmitter board capable of accepting up to four HD-SDI, HD-SDTI, SD-SDI, SDTI, DVB-ASI, 3D dual-link, and/or 3G-SDI inputs. Four Auto-Sensing inputs are provided with one monitor output and multiple format inputs are supported simultaneously. In addition to uncompressed HD-SDI, HD-SDTI, SDI or SDTI inputs, CBR (Constant Bit Rate) DVB-ASI signals (in either byte or burst mode) can be accepted by the UVTX-2022. Inputs may be either electrical or optical.

All Ethernet packets sent by the UVTX-2022 module are transferred across the MD8000 across a non-blocking Layer 2 switch fabric where signal replication is supported over multiple 1GbE, 10GbE and/or OC-192/48/12/3 network interfaces. Each encapsulated video service (HD/SD/DVB-ASI) can have a unique destination or multiple destinations in the network. The SMPTE 425 Dual Link specification is supported for transport of 3D content, Level A 3D-HD-SDI & Level B 3D-3G-SDI. Additionally, the UVTX-2022 provides TR101-ETR290 performance monitoring and real time analysis of each DVB-ASI stream.

Other network transport protection mechanisms include Hitless Switching for redundant paths and Auto Protection. A video generator (useful in circuit turn-up, testing, and troubleshooting) and an ID generator are built into the UVTX-2022 card.

UVTX-2022 – 4 Port HD/SD/DVB-ASI Universal Video TX Module

The UVTX-2022 is a universal transmitter board capable of accepting up to four HD-SDI, HD-SDTI, SD-SDI, SDTI, DVB-ASI, 3D dual-link, and/or 3G-SDI inputs.

MD8000 - UVTX-2022 – 4 Port HD/SD/DVB-ASI Universal Video TX Module

DATASHEETDATASHEET

MD8000 – UVTX-2022 (SDI) – Optical Rear Board Connectors

MD8000 – UVTX-2022 (SDI) – Electrical Rear Board Connectors






DATASHEET-MD8000-UVTX-2022-08-2017

DATASHEET



Universal 4 port Video Transmitter - Supports transparent HD-1080P (2 ports), HD-SDI, SD-SDI and DVB-ASI. Includes electrical rear connector panel

MD801054 MD8000-UVTX-2022-C

Universal 4 port Video Transmitter - Supports transparent HD-1080P (2 ports), HD-SDI, SD-SDI and DVB-ASI. Includes rear con-nector panel for four SFP cages. SFP’s not included

MD801054 MD8000-UVTX-2022-O


Input SD-SDIHD-SDI


525i, 725P, 1080i, 1080P (59.94 Hz)

Audio / ANC Full VANC / HANC


SDTI Interface SMPTE 305M, SMPTE 348M


All Connectors 4x BNC Female, 4x SFP interface

Impedance 75 Ohm, unbalanced


Max. Cable Length 200 m for SDI, 100 m for DVB-ASI (Belden 1694A)

Active Output All Signal Amplitude 800 mVp-p =- 10% (75 Ohm Load)








DATASHEET

UVRX-J2K-2022 – 4 Port 3G HD/SD/DVB-ASI/JPEG2000 Universal Video RX Module – Compressed Video

KEY FUNCTIONS:• JPEG2000 decoding in contribution quality, per ISO/IEC 1544-1 Annex A• Extremely high video quality at 4:2:2 10 bit JPEG2000 part 1• Reduced network bandwidth consumption• External interface to HD/SD/DVB-ASI user circuit• Internal electrical interface to MD8000 SW-CNT modules

KEY FEATURES:• Outputs 1-4 input signals• 3G-SDI/1080P• 3D Dual-Link Supported• ETR290 Performance Monitoring• Optical or Electrical Video Interfaces• SMPTE 2022 1/2 & 5/6• Passes up to 16 uncompressed audio channels along with the V-Ancillary data and Time code• Hitless Switching• Auto Protection Switching (per Service/ Port)• Low Latency

A versatile and widely deployed MD8000 line module, the UVRX-J2K-2022 board is a “Universal” four port video receiver card with decompression that is compatible with SMPTE 2022 sources. The SMPTE 2022 specification describes a standardized method of encapsulating video signals for transmission across IP transport networks. Pairing this module with a compression card like the UVTX-J2K-2022 gives customers high quality video with significantly reduced bandwidth, saving transport costs and allowing more channels to be sent across the network.

The UVRX-J2K-2022 is compatible with the following SMPTE 2022 compliant encoder (source) line cards:•MD8000-JPEG-2022•MD8000-UVTX-2022•MD8000-UVTX-J2K-2022•MD8000-VIF-2022•MD8000-VTX-4S-2022

The four Ethernet streams terminating on this line module can originate anywhere in the MD8000 network. All Ethernet packets sent to and received by this module are transferred across the MD8000 backplane via the Switch Controller module (SW-CNT). DVB-ASI output signals are reconstructed from the transparent Ethernet transport of MPEG2TS. Null packets within the ASI wrapper and are re-inserted at the destination matching the original DVB-ASI input signal. The MD8000-UVRX-2022 provides TR101-ETR290 performance monitoring and real time analysis of each DVB-ASI stream.

The UVRX-J2K-2022 provides resilient Forward Error Correction (FEC) and Lossless/Hitless path protection switching for extremely robust signal transport. Multiple format outputs supported simultaneously.

The UVRX-J2K-2022 module can output the following uncompressed signal types:•DVB-ASI•SD-SDI•SDTI•HD-SDI•HD-SDTI•3G-SDI•3D dual-link

4 Port 3G HD/SD/DVB-ASI/JPEG2000 Universal Video RX Module – Compressed Video

The UVRX-J2K-2022 board is a “Universal” four port video receiver card with decompression that is compatible with SMPTE 2022 sources

DATASHEETDATASHEET

MD8000 – UVRX-J2K-2022 (SDI) – 4 Port HD/SD/DVB-ASI/JPEG2000 Universal Video RX Module – Uncompressed Video

MD8000 – UVRX-J2K-2022 (SDI) – Optical Rear Board Connectors

MD8000 – UVRX-J2K-2022 (SDI) – Electrical Rear Board Connectors

APPLICATIONS:• Carrier Class Media Networks• Flawless Contribution Video-Transport• High Performance Studio Interconnects• Reliable Content Delivery Systems• Integrated Live, Recorded and File-Based Communications






DATASHEET-MD8000-UVRX-J2K-2022-08-2017

DATASHEET



Universal 4 port Video Receiver - Supports transparent HD-1080P (2 ports), HD-SDI, SD-SDI and DVB-ASI. Supports JPEG2000 Decoding for HD-1080P, HD-SDI, SD-SDI.Includes electrical rear connector panel

MD801059 MD8000-UVRX-J2K-2022-C

Universal 4 port Video Receiver - Supports transparent HD-1080P (2 ports), HD-SDI, SD-SDI and DVB-ASI. Supports JPEG2000 Decoding for HD-1080P, HD-SDI, SD-SDI.Includes rear connector panel for four SFP cages. SFP’s not included

MD801059 MD8000-UVRX-J2K-2022-O


Output SD-SDIHD-SDI


525i, 725P, 1080i, 1080P (59.94 Hz)

Audio Full VANC/HANC




Maximum Cable Length

HD-SDI 70m

SDI 200m

DVB-ASI 100m (Belden 1694A)









DATASHEET

UVTX-J2K-2022 – 4 Port HD/SD/DVB-ASI/JPEG2000 Universal Video TX Module with Compression

KEY FUNCTIONS:• JPEG2000 Compression per ISO/IEC 1544-1 Annex A• External interface to HD/SD/DVB-ASI user circuit• Internal electrical interface to MD8000 SW-CNT modules

KEY FEATURES:• Outputs 1-4 input signals• 3G-SDI/1080P• 3D Dual-Link Supported• Auto-Sensing on Video Inputs• ETR290 Performance Monitoring• Multi-format Signal Generator with ID• Optical (SFP) or Electrical (BNC) Video Interfaces• SMPTE 2022 1/2 & 5/6• Hitless Switching• Auto Protection Switching• Passes up to 16 uncompressed audio channels along with the V-Ancillary data and Time code


A versatile and widely deployed MD8000 line module, the UVTX-J2K-2022 TX is a “Universal” four port video transmitter card offering video compression and SMPTE 2022 compatibility. The UVTX-J2K-2022 transmitter board accepts up to four HD-SDI, HD-SDTI, SD-SDI, SDTI, DVB-ASI, 3D dual-link, and/or 3G-SDI inputs. Using JPEG2000 compression, it delivers visually lossless video quality (4:2:2 10 bit JPEG2000 part 1) at significantly lower bitrates than uncompressed video. Compression rates for SD range from 24Mbs to 100Mbs, HD-SDI from 75Mbs to 250Mbs, 3G-SDI from 100Mbs to 500Mbs, 3D-HD-SDI from 150Mbs to 500Mbs, and 3D-3G-SDI from 200Mbs to 1000Mbs.

Compressed video can be sent over a variety of MD8000 trunk cards, including multiple 1GbE, 10GbE and/or OC-192/48/12/3 network interfaces. Hitless Switching supported for redundant path protection. Each encapsulated video service (HD/SD/DVB-ASI) can have a unique destination or multiple destinations in the network The SMPTE 425 Dual Link specification is supported for transport of 3D content, Level A 3D-HD-SDI & Level B 3D-3G-SDI.

Four Auto-Sensing inputs (Electrical or Optical) are provided with one monitor output and multiple format inputs supported simultaneously. The Encoder will pass up to 16 uncompressed audio channels along with the V-Ancillary data and time code. The UVTX-J2K-2022 TX module provides TR101-ETR290 performance monitoring and real time analysis of each DVB-ASI stream.

4 Port HD/SD/DVB-ASI/JPEG2000 Universal Video

TX Module with Compression

The UVTX-J2K-2022 TX is a “Universal” four port video transmitter card offering video compression and SMPTE 2022 compatibility.

MD8000 - UVTX-J2K-2022 – 4 Port HD/SD/DVB-ASI/J2K Universal Video TX Module

DATASHEETDATASHEET

MD8000 – UVTX-J2K-2022 (SDI) – Optical Rear Board Connectors

MD8000 – UVTX-J2K-2022 (SDI) – Electrical Rear Board Connectors






DATASHEET-MD8000-UVTX-J2K-2022-08-2017

DATASHEET



Universal 4 port Video Transmitter - Supports transparent HD-1080P (2 ports), HD-SDI, SD-SDI and DVB-ASI. Supports JPEG2000 Encoding for HD-1080P, HD-SDI, SD-SDI.Includes electrical rear connector panel

MD801058 MD8000-UVTX-J2K-2022-C

Universal 4 port Video Transmitter - Supports transparent HD-1080P (2 ports), HD-SDI, SD-SDI and DVB-ASI. Supports JPEG2000 Encoding for HD-1080P, HD-SDI, SD-SDI.Includes rear connector panel for four SFP cages. SFP’s not included

MD801058 MD8000-UVTX-J2K-2022-O


Input SD-SDIHD-SDI


525i, 725P, 1080i, 1080P (59.94 Hz)





All Connectors 4x BNC Female, 4x SFP interface



Max. Cable Length 200 m for SDI, 100 m for DVB-ASI (Belden 1694A)









DATASHEET

VRX-4S – 4 Port SD/SDTI/DVB-ASI Video Module


KEY FEATURES:• Outputs 1-4 input signals• Front Panel LED indicators for all four inputs• SD-SDI output: 525i (59.94Hz), 625i (50Hz), SMPTE 259M. Can carry up to 8 audio channels• DVB- ASI output: MPEG2-TS, operates in byte or burst mode• Granular bandwidth allocation• Forward Error Correction (FEC)• Four 75 ohm electrical inputs, BNC connectors• Selectable VLAN priority


The VRX-4S module is a four port video receiver supporting SD-SDI, SDTI or DVB-ASI signals. As a receiver, the VRX-4S accepts Ethernet packets from the MD8000 Switch Controller (SW-CNT) and sends them to the appropriate video output ports. The four Ethernet streams that terminate on this module can originate anywhere in the MD8000 network. Each output port has the same functionality as a VIF-1Sch module.

The VRX-4S provides robust Forward Error Correction (FEC) and Lossless/Hitless path protection switching for reliable signal transport. DVB-ASI output signals are reconstructed from the transparent Ethernet transport of MPEG2TS. Nulls within the ASI wrapper are re-inserted matching the original DVB-ASI signal. Only CBR (Constant Bit Rate) is supported for the MPEG2 DVB-ASI transport stream.

The front panel of the VRX-4S module features a comprehensive set of LEDs for monitoring the status and health of incoming video streams. Using SNMP, the module is also fully manageable by Media Links’ NMS systems.

VRX-4S – 4 Port SD/SDTI/DVB-ASI Video Module

The VRX-4S module is a four port video receiver supporting SD-SDI, SDTI or DVB-ASI signals.

MD8000 - VRX-4S – 4 Port SD/SDTI/DVB-ASI Video Module

DATASHEET


OUT1 BNC (75 Ohm) SD-SDI or DVB-ASI Signal Output 1





Front Panel LEDs








CLK-IN1/2 Unused

CLK1/2 Unused


LINE 1/2 SWCNT for the selected channel 1: SWCNT #1, 2: SWCNT #2


Hit/Man Hit: Hitless Switching Mode Man: Manual Switching Mode


OUT 1-4 SD/ASI

SD: SD-SDI ASI: DVB-ASI

SignalDetect

EmbedClock

ExtractMPEG TS

De-PacketizeMPEG TS

ExtractClock

RSEncode

andInterleave

IPEncapsulation

PacketMux

De-PacketizeSDI

ExtractClock

CPU

Formatto

10 Gb/s

SignalDetect

SignalDetect

SignalDetect

EQ

EQ

EQ

EQ

P/S

P/S

P/S

P/S

IN 1

IN 2

IN 3

IN 4

FrontLEDs

Input Processor Timing Processor Video Packetizer BackplaneInterface

SDI/DVB-ASI

If DVB-ASI

If SDI

WestSW-CNT

EastSW-CNT

Channel Name, Typeand IP Address

EmbedClock

MD8000 – VRX-4S – 4 Port SD/SDTI/DVB-ASI Video Module Block Diagram






DATASHEET-MD8000-VRX-4S-08-2017

DATASHEET



SD/SDTI/DVB-ASI 4 Port Uni-Directional Video Module RX MD801010 V-RX-4Sch-F

4 Port DVB-ASI Decoder Module RX with COP3 Encapsulation, FEC & ARP/GARP

MD801040 V-RX-4Sch-F(2022)


Output SD-SDI Format 625i (50 Hz), 525i (59.94 Hz); SMPTE 259M


Interface SMPTE 259M

SDTI Interface SMPTE 305M


Max. Cable Length 200 m for SDI, 100 m for DVB-ASI (at 5C-2V coax cable)









DATASHEET

VTX-4S – 4 Port SD/SDTI/DVB-ASI Video Module


KEY FEATURES:• Accepts 1-4 input signals• Front Panel LED indicators for all four inputs• SD-SDI input: 525i (59.94Hz), 625i (50Hz), SMPTE 259M. Can carry up to 8 audio channels• SDTI: SMPTE 305M• DVB- ASI: MPEG2-TS, operates in byte or burst mode• Granular bandwidth allocation• Forward Error Correction (FEC)• Active Output monitor• Four 75 ohm electrical inputs, BNC connectors• Selectable VLAN priority• Selectable ASI bandwidth: 5Mbps to 270Mbps

The VTX-4S module is a four port video transmitter supporting SD-SDI, SDTI or DVB-ASI signals. The VTX-4S transmits Ethernet packets to the MD8000 Switch Controller (SW-CNT) which then sends them to the appropriate trunk module and out to the wide area network. Each encapsulated Ethernet stream originating on this module is independent and can have a unique destination or multiple destinations in the network.

The VTX-4S provides robust Forward Error Correction (FEC) and Lossless/Hitless path protection switching (on the VRX-4S card) for reliable signal transport. In addition to uncompressed SDI or SDTI inputs, CBR (Constant Bit Rate) DVB-ASI signals in either byte or burst mode can be accepted by the VTX-4/s.

The front panel of the VTX-4S module features a comprehensive set of LEDs for monitoring the status and health of incoming video streams. On the rear interface card, an Active Output port is provided for signal monitoring. Using SNMP, the module is fully manageable by Media Links’ NMS systems.

VTX-4S – 4 Port SD/SDTI/DVB-ASI Video Module

The VTX-4S module is a four port video transmitter supporting SD-SDI, SDTI or DVB-ASI signals.

MD8000 - VTX-4S – 4 Port SD/SDTI/DVB-ASI Video Module

APPLICATIONS:• Carrier Class Media Networks• Flawless Contribution Video-Transport• High Performance Studio Interconnects• Reliable Content Delivery Systems• Integrated Live, Recorded and File-Based Communications

DATASHEET


IN1 BNC (75 Ohm) SD-SDI or DVB-ASI Signal Input 1




ACTIVE BNC (75 Ohm) Active Output of one of the inputs


Front Panel LEDs








CLK-IN1/2 Unused

CLK1/2 Unused

IN 1-4 SD/ASI IN1-4 Signal Type SD: SD-SDI ASI: DVB-ASI

BUF-ERR1 DVB-ASI Buffer Overflow at IN1




SignalDetect

BWControl

ExtractClock

ExtractMPEG TS

PacketizeMPEG TS

EmbedClock

RSEncode

andInterleave

IPEncapsulation

PacketMux

ExtractClock

PacketizeSDI

EmbedClock

CPU

Formatto

10 Gb/s

BWControl

BWControl

BWControl

SignalDetect

SignalDetect

SignalDetect

Selector

EQ

EQ

EQ

EQ

S/P

S/P

S/P

S/P

IN 1

IN 2

IN 3

IN 4

Monitor

FrontLEDs

Input Processor Timing Processor Video Packetizer BackplaneInterface

SDI/DVB-ASI

If DVB-ASI

If SDI

Process Selector

WestSW-CNT

EastSW-CNT

Channel Name, Typeand IP Address

MD8000 – VTX-4S – 4 Port SD/SDTI/DVB-ASI Video Module Block Diagram






DATASHEET-MD8000-VTX-4S-08-2017

DATASHEET



SD/SDTI/DVB-ASI 4 Port Uni-Directional Video Module TX MD801009 V-TX-4Sch-F

4 Port DVB-ASI Encoder Module TX with COP3 Encapsulation, FEC & ARP/GARP

MD801039 V-TX-4Sch-F(2022)


Input SD-SDI Format 625i (50 Hz), 525i (59.94 Hz); SMPTE 259M


Interface SMPTE 259M

SDTI Interface SMPTE 305M


All Connectors 4x BNC Female



Max. Cable Length 200 m for SDI, 100 m for DVB-ASI (at 5C-2V coax cable)









CATALOG The Evolution of Integrated Video Switching … Evolution of Integrated Video Switching and...

Documents

Transcript of CATALOG The Evolution of Integrated Video Switching … Evolution of Integrated Video Switching and...