CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am...

28
To Register Visit nywea.org today! 2019 CATALOG OF TRAINING Your Educational Resource Sponsored by the Member Education Committee Capital Chapter | Central Chapter | Genesee Chapter Long Island Chapter | Lower Hudson Chapter | Western Chapter New York Water Environment Association, 525 Plum Street, Suite 102, Syracuse, New York 13204 • nywea.org 2-11-19

Transcript of CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am...

Page 1: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

To Register Visit nywea.org today!

2019CATALOG OF TRAINING

Your Educational Resource Sponsored by the Member Education Committee

Capital Chapter | Central Chapter | Genesee Chapter Long Island Chapter | Lower Hudson Chapter | Western Chapter

New York Water Environment Association, 525 Plum Street, Suite 102, Syracuse, New York 13204 • nywea.org2-11-19

Page 2: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 2 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

2019 Catalog of Training Sessions

CAPITAL CHAPTER

Mathematics for Water and Wastewater Operators . . . . . . . . . . . . . . 03

Coagulants, Polymers, Metering Pumps & Blending Systems . . . . . . 04

March 6, 2019 May 15, 2019 August 14, 2019 Building New York’s Water Resource Recovery Facility Interest

in Strategic Energy Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05

October 10, 2019 Collection Systems – Inflow and Infiltration . . . . . . . . . . . . . . . . . . . . 06

CENTRAL CHAPTER

March 12, 2019 Coagulants, Polymers, Metering Pumps & Blending Systems . . . . . . 07

July 18, 2019 Mathematics for Water and Wastewater Operators . . . . . . . . . . . . . . 08

September 18, 2019 Nitrogen Removal Workshop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09

November 7, 2019 Collection Systems – Inflow and Infiltration . . . . . . . . . . . . . . . . . . . . 10

GENESEE CHAPTER

Fundamentals of Occupational Chemical Exposure . . . . . . . . . . . . . . 11

Collection Systems – Inflow and Infiltration . . . . . . . . . . . . . . . . . . . 12

February 22, 2019

September 4, 2019

November 12, 2019 Mathematics for Water and Wastewater Operators . . . . . . . . . . . . . . 13

LONG ISLAND CHAPTER

March 14, 2019 Hazard Analysis Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

May 2, 2019 Occupational Stress and Long Hours of Work/Sleep Deprivation . . . 15

October 24, 2019 Collection Systems – Inflow and Infiltration . . . . . . . . . . . . . . . . . . . . 160

LOWER HUDSON CHAPTER

June 19, 2019

September 19, 2019

October 23, 2019

November 20, 2019

Activated Sludge Process Control Workshop . . . . . . . . . . . . . . . . . . 17

Coagulants, Polymers, Metering Pumps & Blending Systems . . . . . . 19

Building NY’s WRRF Interest in Strategic Energy Management . . . . . 20

WESTERN CHAPTER

Mathematics for Water and Wastewater Operators . . . . . . . . . . . . . . 21

Coagulants, Polymers, Metering Pumps & Blending Systems . . . . . . 22 July 17, 2019

November 20, 2019 Collection Systems – Inflow and Infiltration . . . . . . . . . . . . . . . . . . . . 23

Locations, Logistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Faculty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-26

Training Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

February 27, 2019

Mathematics for Water and Wastewater Operators . . . . . . . . . . . . . . . 18

Page 3: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 3 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

March 6 Mathematics for Water and Wastewater Operators

Instructor G. Michael Coley, P.E.

Location Town of Colonie Operations Center, 347 Old Niskayuna Road, Latham, NY

Contact Hours RTC 17880-19, 6.0 Hours; ATC 152-7576-16323, 6.0 Hours

This course will serve as either an introduction to mathematics required for water and wastewater operators or a review for more seasoned operators. This course could also be a valuable one for those preparing for operator examinations.

Course Schedule

8:00 am Registration

8:30 am Basic mathematics review as it pertains to working at a treatment facility; (real world/applied math or what you should know); decimals, fractions, concentrations, percent solids, understanding laboratory results from a mathematics perspective; and basic equations

10:30 am Break

10:45 am Using mathematics to better understand treatment plants; calculation of unit process and unit operation organic, hydraulic and solids loadings; familiarity with standard treatment facility terms and design ranges

12:00 pm Lunch

1:00 pm The importance of mathematics at a treatment facility for both process control and proper dosing. Calculation of mass quantities, activated sludge calculations, sludge handling and flow

measurement.

2:30 pm Break

2:45 pm Attendees participation concerning their specific facility Discussion and calculations

3:45 pm Questions and answers, evaluations and wrap-up

4:00 pm Course adjourned

Capital Chapter Training Session

Page 4: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 4 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

May 15 Coagulants, Polymers, Metering Pumps & Blending Systems

Instructors Tim Clayton, Surpass Chemical; Steve Wardell and Ryan Peebles, Clean Waters; Jerry Connolly, Siewert Equipment

Location Town of Colonie Operations Center, 347 Old Niskayuna Road, Latham, NY

Contact Hours RTC 17885-19, 6.0 Hours; ATC 152-8340-16329, 6.0 Hours; PDH, 6.0 Hours

Course Schedule

8:00 am Registration

8:30 am Overview: Define coagulation and flocculation

8:45 am Charge chemistry overview

9:00 am Coagulation: Aluminum, ferric and polymer chemistry

9:45 am Positives and negatives of each coagulant

10:00 am Break

10:15 am Flocculation

10:30 am Value of jar testing

10:45 am Polymer: An owner’s manual

• Whyweuseit • Storageandhandling

• Polymerselection • Cleaningupspills

• Polymeroptimization • Casestudiesofpolymercostreductions

11:45 am Addition of phosphates to drinking water

• Phosphateadditionforcorrosioncontrol • Injectionpointsanddosedetermination

• Phosphateadditionforiron/manganese • Systemflushing

control

12:00 pm Lunch

1:00 pm Addition of phosphates to drinking water (continued)

• Removalofphosphatesinwastewater

• Coagulantaddition

• Coagulantenhancementfrompolymeraddition

1:45 pm Metering pump technologies

• Hydraulicandmechanicaldiaphragm • Peristaltic

• Solenoid • Internalgear

• Steppermotor • Progressivecavity

2:00 pm Break

2:15 pm Metering pump technologies (continued)

2:45 pm Chemical feed systems: A review

3:15 pm Polymer blending systems

3:50 pm Summary and course wrap-up

4:00 pm Course adjourned

Capital Chapter Training Session

Page 5: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 5 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

Building New York’s Water Resource Recovery Facility Interest in Strategic Energy Management

Instructors Layne McWilliams, Peter Wernsdorfer, Cascade Energy

Location Washington County Municipal Center, Bldg. B, 2nd Floor Classroom, 383 Broadway, Fort Edward, NY

Contact Hours RTC 17888-19, 6.0 Hours; ATC 152-8365-16376, 6.0 Hours; PDH, 5.0 Hours

Course Schedule

7:30 am Registration

8:00 am Welcome and the Reactive vs. Proactive Response to Your Energy Bill

8:30 am Energy basics; rate schedules, consumption and demand

9:00 am Energy mapping: Estimating energy consumption in your facility by process area

10:00 am Break

10:15 am Tracking key performance indicators, benchmarks and energy events

10:35 am Technical training: Common low and no-cost energy saving opportunities

11:35 am Management sponsors, energy champions, energy teams and employee engagement – It takes a village

12:15 pm Lunch

1:00 pm Treasure hunt activity in host facility!

2:15 pm Break

2:30 pm Regroup, review findings and discuss opportunities

2:55 pm Leveraging help: Your local energy provider, state agencies, DOE 50001 ready

3:15 pm Barriers to success

3:25 pm NYSERDA’s SEM efforts, WEC Pilot review and application process

3:35 pm Course evaluations and plant survey

3:45 pm Questions and answers

4:00 pm Course adjourned

Capital Chapter Training SessionAugust 14

Page 6: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 6 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

October 10

Instructors

Location

Contact Hours

8:00 am

8:30 am

Collection Systems – Inflow and Infiltration

Mark Boswell, Total Control System Services, Inc.Jim Caruso, Hach Town of Colonie Operations Center, 347 Old Niskayuna Road, Latham,

RTC 17881-19, 6.0 Hours; PDH, 6.0 Hours

Course Schedule

Registration

Part 1: What is the problem?

• WhatisRDII?

• HowdoesitaffecttheWWTP?

• Whathappenswhenthesystemcan’thandletherain?

• Whataretheimpactsofoverflows?

9:30 am Part 2: How do we find RDII in a system?

• Understandingthecollectionofflowandrainfalldata

• Howdothesetoolswork?

10:00 am Break

10:15 am Part 2: How do we find RDII in a system? (continued)

10:45 am Part 3: Flow measurement technologies

• Fullpipemeasurement

o Available technologies

• Openchannelflowmeasurement

o Available technologies

12:00 pm Lunch

1:00 pm Part 4: What do we do with the data?

• Separateandrankbasinstoprioritize

2:15 pm Break

2:30 pm Part 5: Rehabilitation and options

3:45 pm Summary and course wrap-up

4:00 pm Course adjourned

Capital Chapter Training Session

Page 7: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 7 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

March 12 Coagulants, Polymers, Metering Pumps & Blending Systems

Instructors Tim Clayton, Surpass Chemical; Steve Wardell and Ryan Peebles, Clean Waters; Jerry Connolly, Siewert Equipment

Location Onondaga County Water Environment Protection, 650 Hiawatha Boulevard West, Syracuse, NY

Contact Hours RTC 17885-19, 6.0 Hours; ATC 152-8340-16328, 6.0 Hours; PDH, 6.0 Hours

Course Schedule

8:00 am Registration

8:30 am Overview: Define coagulation and flocculation

8:45 am Charge chemistry overview

9:00 am Coagulation: Aluminum, ferric and polymer chemistry

9:45 am Positives and negatives of each coagulant

10:00 am Break

10:15 am Flocculation

10:30 am Value of jar testing

10:45 am Polymer: An owner’s manual

• Whyweuseit • Storageandhandling

• Polymerselection • Cleaningupspills

• Polymeroptimization • Casestudiesofpolymercostreductions

11:45 am Addition of phosphates to drinking water

• Phosphateadditionforcorrosioncontrol • Injectionpointsanddosedetermination

• Phosphateadditionforiron/manganese • Systemflushing

control

12:00 pm Lunch

1:00 pm Addition of phosphates to drinking water (continued)

• Removalofphosphatesinwastewater

• Coagulantaddition

• Coagulantenhancementfrompolymeraddition

1:45 pm Metering pump technologies

• Hydraulicandmechanicaldiaphragm • Peristaltic

• Solenoid • Internalgear

• Steppermotor • Progressivecavity

2:00 pm Break

2:15 pm Metering pump technologies (continued)

2:45 pm Chemical feed systems: A review

3:15 pm Polymer blending systems

3:50 pm Summary and course wrap-up

4:00 pm Course adjourned

Central Chapter Training Session

Page 8: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 8 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

July 18 Mathematics for Water and Wastewater Operators

Instructor G. Michael Coley, P.E.

Location Holiday Inn, 75 North Street, Auburn, NY

Contact Hours RTC 17880-19, 6.0 Hours; ATC 152-7576-16325, 6.0 Hours

This course will serve as either an introduction to mathematics required for water and wastewater operators or a review for more seasoned operators. This course could also be a valuable one for those preparing for operator examinations.

Course Schedule

8:00 am Registration

8:30 am Basic mathematics review as it pertains to working at a treatment facility; (real world/applied math or what you should know); decimals, fractions, concentrations, percent solids, understanding laboratory results from a mathematics perspective; and basic equations

10:30 am Break

10:45 am Using mathematics to better understand treatment plants; calculation of unit process and unit operation organic, hydraulic and solids loadings; familiarity with standard treatment facility terms and design ranges

12:00 pm Lunch

1:00 pm The importance of mathematics at a treatment facility for both process control and proper dosing. Calculation of mass quantities, activated sludge calculations, sludge handling and flow

measurement.

2:30 pm Break

2:45 pm Attendees participation concerning their specific facility Discussion and calculations

3:45 pm Questions and answers, evaluations and wrap-up

4:00 pm Course adjourned

Central Chapter Training Session

Page 9: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 9 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

September 18 Nitrogen Removal Workshop

Instructor Phil Smith, P.E., M.S., Phil Smith Consulting LLC

Location Utica College, Economic Crime & Justice Building, Carbone Family Auditorium 1600 Burrstone Road, Utica, NY

Contact Hours RTC 17887-19, 6.0 Hours

Course Schedule

8:00 am Registration

8:30 am Forms of nitrogen

9:30 am Nitrification: Fundamentals and key factors

10:30 am Break

10:45 am Denitrification: Fundamentals and key factors

11:30 am Nitrification: Operating strategies

12:00 pm Lunch

1:00 pm Denitrification: Operating strategies

1:30 pm Denitrification modifications: Case study

2:00 pm Troubleshooting common denitrification problems

2:30 pm Break

2:45 pm SBR operations and troubleshooting

3:15 pm Nitrogen removal problems

3:45 pm Discussion, questions and answers

4:00 pm Course adjourned

Central Chapter Training Session

; PDH 6.0 Hours

Page 10: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 10 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

November 7

Instructors

Location

Contact Hours

8:00 am

8:30 am

Collection Systems – Inflow and Infiltration

Mark Boswell, Total Control System Services, Inc.; Jim Caruso, Hach

Chenango Town Hall, 1529 State Rte. 12, Binghamton, NY

RTC 17881-19, 6.0 Hours; PDH, 6.0 Hours

Course Schedule

Registration

Part 1: What is the problem?

• WhatisRDII?

• HowdoesitaffecttheWWTP?

• Whathappenswhenthesystemcan’thandletherain?

• Whataretheimpactsofoverflows?

9:30 am Part 2: How do we find RDII in a system?

• Understandingthecollectionofflowandrainfalldata.

• Howdothesetoolswork?

10:00 am Break

10:15 am Part 2: How do we find RDII in a system? (continued)

10:45 am Part 3: Flow measurement technologies

• Fullpipemeasurement

o Available technologies

• Openchannelflowmeasurement

o Available technologies

12:00 pm Lunch

1:00 pm Part 4: What do we do with the data?

• Separateandrankbasinstoprioritize.

2:15 pm Break

2:30 pm Part 5: Rehabilitation and options

3:45 pm Summary and course wrap-up

4:00 pm Course adjourned

Central Chapter Training Session

Page 11: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 11 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

February 22 Fundamentals of Occupational Chemical Exposure:Physical and Health Hazards of Chemicals for Water and Wastewater This program is part of a NYS DOL HAB grant #C18005GG to the Western New York Council on Occupational Safety and Health (WNYCOSH).

Instructor Nellie J. Brown, MS, CIH

Location Macedon Town Court, 32 Main Street, Macedon, NY

Contact Hours RTC 17882-19, 6.0 Hours; ATC 152-3438-16332, 6.0 Hours; PDH, 6.0 Hours

Course Schedule

(Exercises are distributed throughout the day.)

8:00 am Registration

8:30am Physicalhazardsofchemicals:Fundamentals,terms,applications

Healthhazardsofchemicals:Fundamentals,terms,applications

• Routesofentry

o Factorsaffectingadversehealtheffectsfromexposure

o Fateofchemicalsinthebody

10:15 am Break

10:30am • Routesofentry (continued)

• Acuteandchronicexposure

o Occupationalexposurelimits

o Vaporpressure;estimatingworstcasescenario

o Occupationalexposurelimitsandatypicalworkhours

o Healthconditionsand/orgeneticpredispositions

12:00 am Lunch

1:00pm • Acuteandchronicexposure (continued)

• UsingSDSinformationtocomparerisksandfindsaferalternatives

o Watersolubility

o Vaporhazardratio

o Flashpointandexplosivelimits

• Hierarchyofcontrols:Ventilation,PPE,workpractices

2:15 pm Break

2:30pm • UsingSDSinformationtocomparerisksandfindsaferalternatives(continued)

• Hierarchyofcontrols:Ventilation,PPE,workpractices

4:00pm • Courseadjourned

Genesee Chapter Training Session

Page 12: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 12 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

Instructors

Location

Contact Hours

8:00 am

8:30 am

Collection Systems – Inflow and Infiltration

Peter Frick and Matt Brown, ADS Civil Defense Training Facility, 7220 NY Route 54, Bath, NY

RTC 17881-19, 6.0 Hours; PDH, 6.0 Hours

Course Schedule

Registration

Part 1: What is the problem?

• WhatisRDII?

• HowdoesitaffecttheWWTP?

• Whathappenswhenthesystemcan’thandletherain?

• Whataretheimpactsofoverflows?

9:30 am Part 2: How do we find RDII in a system?

• Understandingthecollectionofflowandrainfalldata

• Howdothesetoolswork?

10:00 am Break

10:15 am Part 2: How do we find RDII in a system? (continued)

10:45 am Part 3: Flow measurement technologies

• Fullpipemeasurement

o Available technologies

• Openchannelflowmeasurement

o Available technologies

12:00 pm Lunch

1:00 pm Part 4: What do we do with the data?

• Separateandrankbasinstoprioritize

2:15 pm Break

2:30 pm Part 5: Rehabilitation and options

3:45 pm Summary and course wrap-up

4:00 pm Course adjourned

Genesee Chapter Training SessionSeptember 4

Page 13: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 13 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

November 12 Mathematics for Water and Wastewater Operators

Instructor G. Michael Coley, P.E.

Location Van Lare Plant Training Room, 1574 Lake Shore Boulevard, Rochester, NY

Contact Hours RTC 17880-19, 6.0 Hours; ATC 152-7576-16326, 6.0 Hours

This course will serve as either an introduction to mathematics required for water and wastewater operators or a review for more seasoned operators. This course could also be a valuable one for those preparing for operator examinations.

Course Schedule

8:00 am Registration

8:30 am Basic mathematics review as it pertains to working at a treatment facility; (real world/applied math or what you should know); decimals, fractions, concentrations, percent solids, understanding laboratory results from a mathematics perspective; and basic equations

10:30 am Break

10:45 am Using mathematics to better understand treatment plants; calculation of unit process and unit operation organic, hydraulic and solids loadings; familiarity with standard treatment facility terms and design ranges

12:00 pm Lunch

1:00 pm The importance of mathematics at a treatment facility for both process control and proper dosing. Calculation of mass quantities, activated sludge calculations, sludge handling and flow

measurement.

2:30 pm Break

2:45 pm Attendees participation concerning their specific facility Discussion and calculations

3:45 pm Questions and answers, evaluations and wrap-up

4:00 pm Course adjourned

Genesee Chapter Training Session

Page 14: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 14 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

March 14 Hazard Analysis TechniquesThis program is part of a NYS DOL HAB grant #C18005GG to the Western New York Council on Occupational Safety and Health (WNYCOSH).

Instructor Nellie Brown, MS, CIH

Location Bergen Point WWTP, 600 Bergen Avenue, Babylon, NY

Contact Hours RTC 17883-19, 6.0 Hours; ATC 152-8342-16334, 6.0 Hours; PDH, 6.0 Hours

Course Schedule

8:00 am Registration

8:30 am Job Hazards Analysis:

Basicsofconductingajobhazardsanalysis

Typesofhazards

Sources of injuries

Exercise: Partially-worked example – lab computer workstation

10:15 am Break

10:30 am Exercise: Partially-workedexample–IsthereanEMFhazardatLodiCardboardInc.?

Process Hazards Analysis: The Hazard and Operability Analysis (HAZOP) Technique:

Hazardandoperabilityanalysisasaprocessanalysistechnique

Basicsofconductingahazardandoperability(HAZOP)analysis

UsesforHAZOP

12:00 pm Lunch

1:00 pm Consequences of process failure to consider

Worked example: Blending a polymer mix to make a casting resin

Exercise: Disinfection

Vulnerability Analysis:

Characteristics of a crisis

Exercise: Crisis audit (Part 1)

The business case for managing crises well

Conducting a crisis audit

2:15 pm Break

2:30 pm Exercise: Crisis audit – crisis families (Part 2)

Diagnosingyourorganization’scrisispreparednessineachcrisisgroup

Signal detection: anticipating areas of vulnerability or possible crises

Exercise: Signal detection

Planning for recovery

Exercise: Crisis audit – recovery (Part 3)

4:00 pm Course adjourned

Long Island Chapter Training Session

Page 15: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 15 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

May 2 Occupational Stress and Long Hours of Work/Sleep Deprivation This program is part of a NYS DOL HAB grant #C18005GG to the Western New York Council on Occupational Safety and Health (WNYCOSH).

Instructor Nellie Brown, MS, CIH

Location Bergen Point WWTP, 600 Bergen Avenue, Babylon, NY

Contact Hours RTC 17884-19, 6.0 Hours; ATC 152-8341-16333, 6.0 Hours

Course Schedule

8:00 am Registration

8:30 am Occupational Stress: Sources and solutions

• Exercise:Jobdemandsvs.jobcontrol

o Whatisstress?Stressis“remembered”

• Exercise:Memoryandemotion

o Stress:Acutevs.chronic

• Exercise:Howdoyoufeelyourstress?

o Whattheorganizationcandotoreducestress

o Whatwecandoforourselvestoreducetheeffectsofstress

• Exercise:Howdoyoucopewiththestressinyourlife?

o Humor–findwaystolaughmore(realorfaked,itworks)

• Exercise:Whatmakesyoulaughoutloud?

10:15 am Break

10:30 am Exercise: Any is valuable; make time for at least the minimum amounts

Sleep: Determine your real sleep need and get enough

• Exercise:Howmanyhoursanightdoyousleep?

o Recreationalactivities,hobbies,outsideinterests,lifelonglearning,dothingsthatmakeyoulosetrackoftime

• Exercise:What“flow”activitiesdoyoudo?

o Socialsupport/familyenvironment(includingpets)

• Whatifyourpersonalstrategiesarenotenough?

12:00 pm Lunch

1:00 pm Stress of long hours of work/sleep deprivation

• Exercise:Hoursofwork/stressissuesoftheattendees

• Effectsofshiftworkanddesynchronization

• Circadianrhythm,desynchronizationasapotentlong-termstressor

• Exercise:Areyousleepdeprived?

o Physiologicalconsequences:Adversehealtheffects;occupationalexposurelimits

o Behavioralconsequences:Decisionmaking;errors/accidents;abuseoffoodordrugs

o Socialconsequences:Securityissues;isolation;familydiscord

• Exercise:Jobdemands/jobcontrol

2:15 pm Break

2:30 pm Reducing the impact of shift work and long hours of work

• Whattheemployercando

• Whattheemployeecando

4:00 pm Course adjourned

Long Island Chapter Training Session

Page 16: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 16 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

October 24

Instructors

Location

Contact Hours

8:00 am

8:30 am

Collection Systems – Inflow and Infiltration

Peter Frick and Matt Brown, ADS Bergen Point WWTP, 600 Bergen Avenue, Babylon, NY

RTC 17881-19, 6.0 Hours; PDH, 6.0 Hours

Course Schedule

Registration

Part 1: What is the problem?

• WhatisRDII?

• HowdoesitaffecttheWWTP?

• Whathappenswhenthesystemcan’thandletherain?

• Whataretheimpactsofoverflows?

9:30 am Part 2: How do we find RDII in a system?

• Understandingthecollectionofflowandrainfalldata

• Howdothesetoolswork?

10:00 am Break

10:15 am Part 2: How do we find RDII in a system? (continued)

10:45 am Part 3: Flow measurement technologies

• Fullpipemeasurement

o Available technologies

• Openchannelflowmeasurement

o Available technologies

12:00 pm Lunch

1:00 pm Part 4: What do we do with the data?

• Separateandrankbasinstoprioritize

2:15 pm Break

2:30 pm Part 5: Rehabilitation and options

3:45 pm Summary and course wrap-up

4:00 pm Course adjourned

Long Island Chapter Training Session

Page 17: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 17 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

June 19 Activated Sludge Process Control Workshop

Instructor Phil Smith, P.E., M.S., Phil Smith Consulting LLC

Location Wallkill Golf Club, 40 Sands Road, Middletown, NY

Contact Hours RTC 17886-19, 6.0 Hours

Course Schedule

8:00 am Registration

8:30 am Activated sludge overview and modes

9:15 am Activated sludge control parameters

10:00 am Break

10:15 am Activated sludge control parameters (continued)

10:45 am Settleability and sludge quality

11:15 am Microbiology and filament control

12:00 pm Lunch

1:00 pm Introduction to nitrification and denitrification

1:30 pm Process control strategies and mass control

2:15 pm Break

2:30 pm Establishing SCSD process control targets

3:00 pm Troubleshooting activated sludge problems

3:45 pm Discussion, questions and answers

4:00 pm Course adjourned

Lower Hudson Chapter Training Session

; PDH 6.0 Hours

Page 18: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 18 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

September 19 Mathematics for Water and Wastewater Operators

Instructor G. Michael Coley, P.E.

Location Monticello Fire House, 23 Richardson Ave., Monticello, NY

Contact Hours RTC 17880-19, 6.0 Hours; ATC 152-7576-16324, 6.0 Hours

This course will serve as either an introduction to mathematics required for water and wastewater operators or a review for more seasoned operators. This course could also be a valuable one for those preparing for operator examinations.

Course Schedule

8:00 am Registration

8:30 am Basic mathematics review as it pertains to working at a treatment facility; (real world/applied math or what you should know); decimals, fractions, concentrations, percent solids, understanding laboratory results from a mathematics perspective; and basic equations

10:30 am Break

10:45 am Using mathematics to better understand treatment plants; calculation of unit process and unit operation organic, hydraulic and solids loadings; familiarity with standard treatment facility terms and design ranges

12:00 pm Lunch

1:00 pm The importance of mathematics at a treatment facility for both process control and proper dosing. Calculation of mass quantities, activated sludge calculations, sludge handling and flow

measurement.

2:30 pm Break

2:45 pm Attendees participation concerning their specific facility Discussion and calculations

3:45 pm Questions and answers, evaluations and wrap-up

4:00 pm Course adjourned

Lower Hudson Chapter Training Session

Page 19: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 19 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

October 23 Coagulants, Polymers, Metering Pumps & Blending Systems

Instructors Tim Clayton, Surpass Chemical; Steve Wardell and Ryan Peebles, Clean Waters; Jerry Connolly, Siewert Equipment

Location Slater Chemical Fire Co., 76 Old Glenham Rd., Glenham, NY

Contact Hours RTC 17885-19, 6.0 Hours; ATC 152-8340-16331, 6.0 Hours; PDH, 6.0 Hours

Course Schedule

8:00 am Registration

8:30 am Overview: Define coagulation and flocculation

8:45 am Charge chemistry overview

9:00 am Coagulation: Aluminum, ferric and polymer chemistry

9:45 am Positives and negatives of each coagulant

10:00 am Break

10:15 am Flocculation

10:30 am Value of jar testing

10:45 am Polymer: An owner’s manual

• Whyweuseit • Storageandhandling

• Polymerselection • Cleaningupspills

• Polymeroptimization • Casestudiesofpolymercostreductions

11:45 am Addition of phosphates to drinking water

• Phosphateadditionforcorrosioncontrol • Injectionpointsanddosedetermination

• Phosphateadditionforiron/manganese • Systemflushing

control

12:00 pm Lunch

1:00 pm Addition of phosphates to drinking water (continued)

• Removalofphosphatesinwastewater

• Coagulantaddition

• Coagulantenhancementfrompolymeraddition

1:45 pm Metering pump technologies

• Hydraulicandmechanicaldiaphragm • Peristaltic

• Solenoid • Internalgear

• Steppermotor • Progressivecavity

2:00 pm Break

2:15 pm Metering pump technologies (continued)

2:45 pm Chemical feed systems: A review

3:15 pm Polymer blending systems

3:50 pm Summary and course wrap-up

4:00 pm Course adjourned

Lower Hudson Chapter Training Session

Page 20: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 20 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

November 20 Building New York’s Water Resource Recovery Facility Interest in Strategic Energy Management

Instructors Layne McWilliams, Peter Wernsdorfer, Cascade Energy

Location Yonkers Joint WWTP, 1 Fernbrook St., Yonkers, NY

Contact Hours RTC 17888-19, 6.0 Hours; ATC 152-8365-16377, 6.0 Hours; PDH, 5.0 Hours

Course Schedule

7:30 am Registration

8:00 am Welcome and the Reactive vs. Proactive Response to Your Energy Bill

8:30 am Energy basics; rate schedules, consumption and demand

9:00 am Energy mapping: Estimating energy consumption in your facility by process area

10:00 am Break

10:15 am Tracking key performance indicators, benchmarks and energy events

10:35 am Technical training: Common low and no-cost energy saving opportunities

11:35 am Management sponsors, energy champions, energy teams and employee engagement – It takes a village

12:15 pm Lunch

1:00 pm Treasure hunt activity in host facility!

2:15 pm Break

2:30 pm Regroup, review findings and discuss opportunities

2:55 pm Leveraging help: Your local energy provider, state agencies, DOE 50001 ready

3:15 pm Barriers to success

3:25 pm NYSERDA’s SEM efforts, WEC Pilot review and application process

3:35 pm Course evaluations and plant survey

3:45 pm Questions and answers

4:00 pm Course adjourned

Lower Hudson Chapter Training Session

Page 21: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 21 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

February 27 Mathematics for Water and Wastewater Operators

Instructor G. Michael Coley, P.E.

Location Protocol Restaurant, 6766 Transit Road, Williamsville, NY

Contact Hours RTC 17880-19, 6.0 Hours; ATC 152-7576-16322, 6.0 Hours

This course will serve as either an introduction to mathematics required for water and wastewater operators or a review for more seasoned operators. This course could also be a valuable one for those preparing for operator examinations.

Course Schedule

8:00 am Registration

8:30 am Basic mathematics review as it pertains to working at a treatment facility; (real world/applied math or what you should know); decimals, fractions, concentrations, percent solids, understanding laboratory results from a mathematics perspective; and basic equations

10:30 am Break

10:45 am Using mathematics to better understand treatment plants; calculation of unit process and unit operation organic, hydraulic and solids loadings; familiarity with standard treatment facility terms and design ranges

12:00 pm Lunch

1:00 pm The importance of mathematics at a treatment facility for both process control and proper dosing. Calculation of mass quantities, activated sludge calculations, sludge handling and flow

measurement.

2:30 pm Break

2:45 pm Attendees participation concerning their specific facility Discussion and calculations

3:45 pm Questions and answers, evaluations and wrap-up

4:00 pm Course adjourned

Western Chapter Training Session

Page 22: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 22 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

July 17 Coagulants, Polymers, Metering Pumps & Blending Systems

Instructors Tim Clayton, Surpass Chemical; Steve Wardell and Ryan Peebles, Clean Waters; Jerry Connolly, Siewert Equipment

Location Fredonia Technology Incubator, 214 Central Avenue, Dunkirk, NY

Contact Hours RTC 17885-19, 6.0 Hours; ATC 152-8340-16330, 6.0 Hours; PDH, 6.0 Hours

Course Schedule

8:00 am Registration

8:30 am Overview: Define coagulation and flocculation

8:45 am Charge chemistry overview

9:00 am Coagulation: Aluminum, ferric and polymer chemistry

9:45 am Positives and negatives of each coagulant

10:00 am Break

10:15 am Flocculation

10:30 am Value of jar testing

10:45 am Polymer: An owner’s manual

• Whyweuseit • Storageandhandling

• Polymerselection • Cleaningupspills

• Polymeroptimization • Casestudiesofpolymercostreductions

11:45 am Addition of phosphates to drinking water

• Phosphateadditionforcorrosioncontrol • Injectionpointsanddosedetermination

• Phosphateadditionforiron/manganese • Systemflushing

control

12:00 pm Lunch

1:00 pm Addition of phosphates to drinking water (continued)

• Removalofphosphatesinwastewater

• Coagulantaddition

• Coagulantenhancementfrompolymeraddition

1:45 pm Metering pump technologies

• Hydraulicandmechanicaldiaphragm • Peristaltic

• Solenoid • Internalgear

• Steppermotor • Progressivecavity

2:00 pm Break

2:15 pm Metering pump technologies (continued)

2:45 pm Chemical feed systems: A review

3:15 pm Polymer blending systems

3:50 pm Summary and course wrap-up

4:00 pm Course adjourned

Western Chapter Training Session

Page 23: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 23 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

November 20

Instructors

Location

Contact Hours

8:00 am

8:30 am

Collection Systems – Inflow and Infiltration

Peter Frick and Matt Brown, ADS

THE SPACE BETWEEN (Towpath Hall)14 W Main St, Lockport, NY 14094

RTC 17881-19, 6.0 Hours; PDH, 6.0 Hours

Course Schedule

Registration

Part 1: What is the problem?

• WhatisRDII?

• HowdoesitaffecttheWWTP?

• Whathappenswhenthesystemcan’thandletherain?

• Whataretheimpactsofoverflows?

9:30 am Part 2: How do we find RDII in a system?

• Understandingthecollectionofflowandrainfalldata

• Howdothesetoolswork?

10:00 am Break

10:15 am Part 2: How do we find RDII in a system? (continued)

10:45 am Part 3: Flow measurement technologies

• Fullpipemeasurement

o Available technologies

• Openchannelflowmeasurement

o Available technologies

12:00 pm Lunch

1:00 pm Part 4: What do we do with the data?

• Separateandrankbasinstoprioritize

2:15 pm Break

2:30 pm Part 5: Rehabilitation and options

3:45 pm Summary and course wrap-up

4:00 pm Course adjourned

Western Chapter Training Session

Page 24: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 24 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

Locations of Training Sessions CAPITAL CHAPTER • Town of Colonie Operations Center

347 Old Niskayuna Road, Latham, NY 12110

• Washington County WWTPBuilding B, 2nd Floor Classroom, 383 Broadway, Fort Edward, NY 12828

CENTRAL CHAPTER• Chenango Town Hall

1529 State Route 12, Binghamton, NY

• Holiday Inn75 North Street, Auburn, NY 13021

• Onondaga County Water Environment Protection650 Hiawatha Boulevard West, Syracuse, NY

• Utica College, Economic Crime & Justice Building, Carbone Family Auditorium1600 Burrstone Road, Utica, NY

GENESEE CHAPTER• Civil Defense Training Facility

7220 NY Route 54, Bath, NY

• Macedon Town Court32 Main Street, Macedon, NY

• Van Lare Plant Training Room1574 Lake Shore Boulevard, Rochester, NY

LONG ISLAND CHAPTER • Bergen Point Wastewater Plant

Southwest Sewer District #3, 600 Bergen Avenue, Babylon, NY

LOWER HUDSON CHAPTER• Monticello Firehouse

23 Richardson Avenue, Monticello, NY

• Wallkill Golf Club40 Sands Road, Middletown, NY

• Slater Chemical Fire Co.76 Old Glenham Road, Glenham, NY

• Yonkers Joint WWTP1 Fernbrook Street, Yonkers, NY

WESTERN CHAPTER • Fredonia Technology Incubator

214 Central Avenue, Dunkirk, NY

• THE SPACE BETWEEN (Towpath Hall)14 W Main St, Lockport, NY 14094

• Protocol Restaurant6766 Transit Road, Williamsville, NY

LOGISTICSRegistration confirmation, directions and other pertinent information will be mailed or e-mailed to the address on the registration form one week prior to each workshop.

Cancellations must be received 10 days in advance of event. Refunds are subject to a $20 administrative fee.

Page 25: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 25 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

Faculty and Course Titles • Activated Sludge Process Control Workshop• Nitrogen Removal Workshop

Phil Smith, P.E., M.S., Phil Smith Consulting LLCPhil Smith was with the NYSDEC for 32 years providing training to operators, engineers, and regulatory staff. He bringsextensive experience in activated sludge process control and has helped many communities troubleshoot and optimizetheir activated sludge systems. He has delivered numerous presentations on activated sludge.

• Building New York’s Water Resource Recovery Facility Interest in Strategic Energy ManagementLayne McWilliams, Cascade EnergyLayne McWilliams leads the Water/Wastewater group within Cascade Energy, focusing primarily on strategic energymanagement (SEM) engagements. Since 2010, he has worked with plant managers and operators to identify energy-efficiency opportunities within our nation’s public infrastructure, primarily through no- and low-cost O&M improvements. Peter Wernsdorfer joined Cascade in 2018 following a long career in the wastewater and public works industry. Peter and Layne are leading the 2018 and 2019 cohorts of facilities through NYSERDA’s Wastewater Energy Coaching program from which this one-day class material was drawn.

• Coagulants, Polymers, Metering Pumps & Blending SystemsTim Clayton, Surpass Chemical Co., Inc.Tim Clayton is currently Technical Sales Manager at Surpass Chemical and is responsible for water/wastewater applica-tions out of Albany, NY. Surpass Chemical Co. manufactures sodium hypochlorite and distributes all other types of water/wastewater chemistry. Tim is the training facilitator, offering onsite dual-certified, contact hour training throughout NYS.Tim has over 15 years of experience in water treatment (ultra-pure water, boiler, cooling, as well as influent water andwastewater treatment).

Jerry Connolly, Siewert EquipmentJerry Connolly is currently a Vice President at Siewert Equipment. He previously worked for 10 years with Pulsafeeder as Global Vice-President, Sales and Marketing. Prior to that, Jerry worked for 13 years with Goulds Pumps in various engineering, sales and management positions.

• Collection Systems – Inflow and InfiltrationPeter Frick, ADSPeter Frick has more than 28 years of environmental market experience including water, wastewater, and laboratoryservices. He is currently responsible for sales and business development in New England and the Mid-Atlantic, and man-ages the Business Development Managers within the region. Along with regional responsibilities, Mr. Frick is directlyaccountable for business development, technical solutions, and client services for selected clients in EPA Region 1 andRegion 2. Mr. Frick earned an MBA in Finance from the University of Bridgeport, Bridgeport, CT, and a BS in Chemistryfrom the University of Connecticut.

Jeff Cantwell, Flow Assessment ServicesJeff Cantwell has over 20 years of direct involvement in flow measurement and 13 years of direct involvement with all collection systems issues. He earned a Bachelor of Science and Master of Business Administration degrees from West Chester University. Jeff is also an alumnus of Villanova University Engineering, an Instrument Society of America Flow Meter Engineer, and is active in the Water Environment Federation Collection System Committees in Pennsylvania, New Jersey, New York and the Chesapeake section.

Mark Boswell, Total Control System Services, Inc.Mark Boswell started his career in instrumentation in 1972 in the U.S. Air Force. He has been the Hach/Marsh McBirney representative for the past 25 years, best known for Flo-Dar A/V meters. His company was Total Control System Services which this past August was purchased by Temp Press Inc. where he is currently employed. Mark has been married 43 years to his wife Susan, raised four kids, and now has three grandchildren, plus one on the way.

Page 26: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 26 2019 CATALOG OF TRAINING

P: 315-422-7811F: 315-422-3851

• Fundamentals of Occupational Chemical Exposure• Hazard Analysis Techniques• Occupational Stress and Long Hours of Work/Sleep Deprivation

Nellie J. Brown, MS, CIH, Director of Workplace Health and Safety Programs for the Worker Institute at CornellUniversity’s School of Industrial and Labor Relations, Ithaca, NYNellie Brown is the Director of Workplace Health and Safety Programs for the Worker Institute at Cornell University’sSchool of Industrial and Labor Relations. She is a certified industrial hygienist, biologist and chemist. She earned herMaster’s degree in a multidisciplinary program in natural sciences and applied science from the SUNY College at Buffalo.She has experience as a licensed wastewater treatment plant operator and has been trained as a lead inspector, an HIV/AIDs test counselor and in mold investigations and site assessments.

• Mathematics for Water and Wastewater OperatorsG. Michael Coley, PE (retired)Mike Coley retired in 2018 as First Deputy Commissioner for Westchester County Department of Environmental Facili-ties. Mike is a professional engineer, NYSDEC certified grade 4A operator and a member of the Select Society of SanitarySludge Shovelers and has over 40 years’ experience in the wastewater field working for Onondaga County, NYSDEC andWestchester County. Mike has an AAS degree from SUNY Morrisville and BSCE from Union College in Schenectady, NY.

Page 27: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

NYWEA MEMBER EDUCATION COMMITTEE 27 2019 CATALOG OF TRAINING

525 Plum Street, Suite 102, Syracuse, NY 13204 • P: 315 422-7811 • F: 315 422-3851525 Plum Street, Suite 102, Syracuse, NY 13204 • P: 315 422-7811 • F: 315 422-3851

NYWEA MEC 2019 Training CalendarDATE CHAPTER SESSION / LOCATION

February 27, 2019 Western Mathematics for Water and Wastewater Operators Protocol Restaurant, 6766 Transit Road, Williamsville, NY

February 4–6, 2019 NYWEA 91st Annual Meeting & Exhibition New York City Marriott Marquis

February 22, 2019 Genesee Fundamentals of Occupational Chemical Exposure Macedon Town Court, 32 Main Street, Macedon, NY

March 6, 2019 Capital Mathematics for Water and Wastewater Operators Town of Colonie Operations Center, 347 Old Niskayuna Road, Latham, NY

March 12, 2019 Central Coagulants, Polymers, Metering Pumps & Blending Systems Onondaga County Water Environment Protection, 650 Hiawatha Boulevard West, Syracuse, NY

March 14, 2019 Long Island Hazard Analysis Techniques Bergen Point WWTP, 600 Bergen Avenue, Babylon, NY

April 10, 2019 Lower Hudson Mathematics for Water and Wastewater Operators Monticello Firehouse, 23 Richardson Avenue, Monticello, NY

May 2, 2019 Long Island Occupational Stress Bergen Point WWTP, 600 Bergen Avenue, Babylon, NY

May 15, 2019 Capital Coagulants, Polymers, Metering Pumps & Blending Systems Town of Colonie Operations Center, 347 Old Niskayuna Road, Latham, NY

June 10–13, 2019 NYWEA Spring Technical Meeting & Exhibition The Saratoga Hilton, Saratoga Springs, NY

June 19, 2019 Lower Hudson Activated Sludge Process Control Workshop Wallkill Golf Club, 40 Sands Road, Middletown, NY

August 14, 2019 Capital Building NY’s WRRF Interest in Strategic Energy Management Washington County Municipal Center, Building B, 2nd Floor Classroom, 383 Broadway, Fort Edward, NY

July 17, 2019 Western Coagulants, Polymers, Metering Pumps & Blending Systems Fredonia Technology Incubator, 214 Central Avenue, Dunkirk, NY

July 18, 2019 Central Mathematics for Water and Wastewater Operators Holiday Inn, 75 North Street, Auburn, NY

September 4, 2019 Genesee Collection System – Inflow and Infiltration Civil Defense Training Facility, 7220 NY Route 54, Bath, NY

September 18, 2019 Central Nitrogen Removal Workshop Utica College, Economic Crime & Justice Building, 1600 Burrstone Road, Utica, NY

October 10, 2019 Capital Collection System – Inflow and Infiltration Town of Colonie Operations Center, 347 Old Niskayuna Road, Latham, NY

October 23, 2019 Lower Hudson Coagulants, Polymers, Metering Pumps & Blending Systems Slater Chemical Fire Co., 76 Old Glenham Road, Glenham, NY

October 24, 2019 Long Island Collection System – Inflow and Infiltration Bergen Point WWTP, 600 Bergen Avenue, Babylon, NY

November 20, 2019 Lower Hudson Building NY’s WRRF Interest in Strategic Energy Management Yonkers Joint WWTP, 1 Fernbrook Street, Yonkers, NY

November 7, 2019 Central Collection System – Inflow and Infiltration Chenango Town Hall, 1529 State Route 12, Binghamton, NY

November 12, 2019 Genesee Mathematics for Water and Wastewater Operators Van Lare Plant Training Room, 1574 Lake Shore Boulevard, Rochester, NY

November 20, 2019 Western Collection System – Inflow and Infiltration The Space Between (Towpath Hall) 14 W Main St, Lockport, NY 14094

Page 28: CATALOG OF TRAINING Conferences Documents/MECCa… · 10:30 am Value of jar testing 10:45 am Polymer: An owner’s manual •Why we use it •Storage and handling •Polymer selection

TRAINING SESSIONS REGISTRATION I PLEASE PRINT. ONE FORM COMPLETED PER INDIVIDUAL.

Name ____________________________ _ NYWEA Member O Yes ONo

[Non-member registration includes 1-year Affiliate Membership.]

Certificate/License# __________________ _ 0 Wastewater O Water O Professional Engineer

Company / Affiliation ------------------------------------

Mailing Address __________________ _ City______ State _ Zip ____ _ 0 Home Address 0 Business Address (Email or mail confirmations with directions will be sent 1 week prior to event.)

Phone( __ _, ________ _ Email (required} ______________________ _

DATE 2019 SEMINAR TITLE MEMBER NON-MEMBER TOTAL

Capital Chapter Training Sessions

Mathematics for Water and Wastewater Operators Coagulants, Polymers, Metering Pumps & Blending Systems Building NY's WRRF Interest in Strategic Energy Management

D March 6, 2019 D May 15, 2019 D August 14, 2019 D October 10, 2019 Collection Systems- Inflow and Infiltration

Central Chapter Training Sessions

D March 12, 2019 Coagulants, Polymers, Metering Pumps & Blending Systems D July 18, 2019 Mathematics for Water and Wastewater Operators D September 18, 2019 Nitrogen Removal Workshop D November 7, 2019 Collection Systems- Inflow and Infiltration

Genesee Chapter Training Sessions

Fundamentals of Occupational Chemical Exposure** Collection Systems - Inflow and Infiltration

D February 22, 2019 D September 4, 2019 D November 12, 2019 Mathematics for Water and Wastewater Operators

Long Island Chapter Training Sessions

D March 14, 2019 Hazard Analysis Techniques** D May 2, 2019 Occupational Stress & Long Hours of Work/Sleep Deprivation** D October 24, 2019 Collection Systems- Inflow and Infiltration

Lower Hudson Chapter Training Sessions

Mathematics for Water and Wastewater Operators Activated Sludge Process Control Workshop Coagulants, Polymers, Metering Pumps & Blending Systems

D September 19, 2019 D June 19, 2019 D October 23, 2019 D November 20, 2019 Building NY's WRRF Interest in Strategic Energy Management

Western Chapter Training Sessions

Mathematics for Water and Wastewater Operators Coagulants, Polymers, Metering Pumps & Blending Systems

D February 27, 2019 D July 17, 2019 D November 20, 2019 Collection Systems - Inflow and Infiltration

** Program is part of a NYS DOL HAB grant #C18005GG to WNYCOSH **

$60.00 $60.00 $60.00 $60.00

$60.00 $60.00 $60.00 $60.00

$40.00 $60.00 $60.00

$40.00 $40.00 $60.00

$60.00 $60.00 $60.00 $60.00

$60.00 $60.00 $60.00

PLEASE FILL OUT PAYMENT INFORMATION: (mail to NYWEA, or fax to 315-422-3851)

Payment Options D Check#____ Credit Card D MC D VISA D AMEX D Voucher

Card Number Exp. Date V-Code

Signature

Company

Contact Person

Address E-Mail (required)

City State Zip Telephone

$145.00 $145.00 $145.00 $145.00

$145.00 $145.00 $145.00 $145.00

$40.00 $145.00 $145.00

$40.00 $40.00

$145.00

$145.00 $145.00 $145.00 $145.00

$145.00 $145.00 $145.00 TOTAL

NYWEA LEADING THE WAY IN

WATER QUALITY MANAGEMENT

$ __

$ __

$ __

$ __

$ __

$ __

$ __

$ __

$ __

$ __

$ __

$ __

$ __

$ __

$ __

$ __

$ __

$ __

$ __

$ __

$ __

$ __

Date ________ Authorized Signature ___________________ _ Please make checks payable to: NYWEA, Inc., mail to NYWEA, Inc., 525 Plum Street, Suite 102, Syracuse, New York 13204, or fax to 315-422-3851 NYWEA MEMBER EDUCATION COMMITTEE 28 2019 CATALOG OF TRAINING