Catalog Industrial Ethernet 2008

Industrial Ethernet Solutions for Control and Automation

0

Solution Tutorial 1-2

EDS-828 1-7

24+4G-port Layer 3 Gigabit modular managed Ethernet switch

EDS-728 1-9

24+4G-port Gigabit modular managed Ethernet switch

IM Series 1-11

Gigabit Ethernet and fast Ethernet interface modules

About Moxa 0-1

Table of Contents 0-9

Solution Spotlights 0-11

Selection Guide 0-15

Applications 0-23


EDS-G509 2-8

9G-port full Gigabit managed Ethernet switch

EDS-518A 2-10

16+2G-port Gigabit managed Ethernet switch

EDS-510A 2-12


EDS-516A/508A/505A 2-14

16-, 8-, and 5-port managed Ethernet switches

EDS-408A/405A 2-17

8- and 5-port entry-level managed Ethernet switches

PX-1510 2-19

7+3G-port Gigabit PoE managed Ethernet switch

Moxa NMS 2-21

Network management software

EDS-SNMP OPC Server Pro 2-22

OPC server for connecting SNMP devices

SFP-1G Series 2-23

1G-port Gigabit Ethernet SFP modules


EDS-G308 3-5

8G-port full Gigabit unmanaged Ethernet switch

EDS-P308 3-7

8-port IEEE 802.3af PoE unmanaged Ethernet switch

EDS-305-M12 3-10

5-port M12/IP67 unmanaged Ethernet switch

EDS-316/309/308/305 3-12

16, 9, 8, and 5-port unmanaged Ethernet switches

EDS-208A/205A/208/205 3-15

8 and 5-port entry-level unmanaged Ethernet switches


PT-7828 4-6

IEC 61850-3 24+4G-port Layer 3 Gigabit modular managed Ethernet switch

PT-7728 4-9

IEC 61850-3 24+4G-port Gigabit modular managed Ethernet switch

PT-7710 4-12


PT-7324 4-14

IEC 61850-3 22+2G-port Gigabit smart Ethernet switch

IKS-6726 4-16


IKS-6324 4-19

22+2G-port Gigabit unmanaged Ethernet switch

PM-7200 Series 4-21

Gigabit Ethernet and fast Ethernet interface modules


AWK-3121 5-5

Advanced industrial wireless AP/Bridge/Client

AWK-1200 5-7

Outdoor wireless AP/Bridge or AP Client

AWK-1100 5-9

Industrial wireless AP/Bridge/AP Client

Accessories 5-11

IEEE 802.11a/b/g omni & directional antennas

www.moxa.com emai l : [email protected] 0-9

Table of Contents

Table of Contents

Chapter 0 Overview

Chapter 1 Modular Managed Ethernet Switches

Chapter 3 Unmanaged Ethernet Switches

Chapter 4 Rackmount Ethernet Switches

Chapter 2 Managed Ethernet Switches

Chapter 5 Industrial Wireless Ethernet

2

3

5

4

6

7

8

9

10

11

12

Overview

Wireless

EthernetActive Ethernet I/O

Peer-to-PeerI/O

Modular

Remote I/O

Media

ConvertersAccessories

Ordering Inform

ation

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

VideoNetworkingProducts0

Active Ethernet I/O Tutorial 6-2

ioLogik E2210 6-8

Active Ethernet I/O with 12 DI, 8 DO

ioLogik E2212 6-9

Active Ethernet I/O with 8 DI, 8 DO, 4 DIO

ioLogik E2214 6-10

Active Ethernet I/O with 6 DI, 6 relay outputs

ioLogik E2240 6-11

Active Ethernet I/O with 8 AI, 2 AO

ioLogik E2242 6-12

Active Ethernet I/O with 4 AI, 12 configurable DIO

ioLogik E2260 6-13

Active Ethernet I/O with 6 RTD inputs, 4 DO

ioLogik E2262 6-14

Active Ethernet I/O with 8 TC inputs, 4 DO

Serial Remote I/O Tutorial 6-15

ioLogik R2110 6-16

RS-485 I/O with 12 DI, 8 DO

ioLogik R2140 6-17

RS-485 I/O with 8 AI, 2 AO

Accessories 6-18

Snap-on LCD module


NA-4010 8-7

Ethernet network adaptor

NA-4020/4021 8-8

RS-485 or RS-232 network adaptors

M-1000 8-9

Digital input modules

M-2000 8-12

Digital output modules

M-3000 8-16

Analog input modules

M-6000 8-18

Temperature input modules

M-4000 8-19

Analog output modules

M-7000 8-20

Power modules

Accessories 8-22


VPort 25 9-6

Fixed dome IP camera for outdoors

VPort 354 9-9

4-channel MJPEG/MPEG4 industrial video encoder

VPort 351 9-12

1-channel MJPEG/MPEG4 industrial video encoder

VPort 3310 9-15

1-channel MPEG4 industrial video server

VPort 251 9-17

1-channel MJPEG/MPEG4 video encoder

VPort 2141 9-19

4-channel MJPEG video server

VPort D351 9-21

1-channel MJPEG/MPEG4 industrial video decoder

SoftNVR 9-23

Advanced video-over-IP surveillance software

SoftDVR™ Pro 9-24

Video-over-IP surveillance software

VPort SDK 9-26

User-friendly software development kit

IMC-101G 10-2

Industrial Gigabit media converter

IMC-101 10-4

Industrial media converter

IMC-21 10-6

Entry-level industrial media converter

ABC-01 11-1

Industrial RS-232 RJ45-based automatic configuration backup solution

DR Series 11-2

24 or 48 VDC DIN-Rail Power Supply

Mounting Kits 11-3

Wall mounting, rack mounting, and DIN-Rail mounting kits

Fiber Patch Cords 11-4

Multi-mode Optical Fiber Patch Cords


ioMirror E3210 7-5

Ethernet Peer-to-Peer I/O with 8 DI, 8 DO

Table of Contents

emai l : [email protected] www.moxa.com 0-10

Chapter 6 Active Ethernet I/O

Chapter 7Peer-to-Peer I/O

Chapter 8 Modular Remote I/O Chapter 11

Accessories

Chapter 10 Industrial Media Converters

Chapter 12 Appendix: Product Ordering Information 12-1

Chapter 9Video Networking Products


0


Modular Ethernet SwitchesEDS-828/728 Series

Layer 3 switching functionality (EDS-828)Up to 4 Gigabit and 24 fast Ethernet ports with copper or fiber optic connectors High fault-tolerance redundancy with Gigabit Turbo RingQoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON supportedIEEE 802.1X, HTTPS, and SSH to enhance network security

Full Gigabit Ethernet SwitchesEDS-G509/G308 Series

Compact full Gigabit Ethernet switch for high performanceFiber optic options for extending distance and electrical noise immunityTurbo Ring, RSTP/STP for Ethernet redundancy (EDS-G509)QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON, IEEE 802.1X, HTTPS, and SSH supported (EDS-G509)-40 to 75˚C operating temperature range

Network Management SoftwareMoxa NMS

Auto-Discovery to create topology mapVarious trending graphs to generate performance reportsFault management system to monitor network anomaliesRemotely accessible through user-friendly web UI

Moxa is proud to provide one-stop shopping for industrialEthernet infrastructure solutions, which include Gigabitmodular Ethernet switches, (Gigabit) managed Ethernetswitches, unmanaged Ethernet switches, and user-friendlynetwork management software. Moxa’s industrial Ethernetswitches provide optimal performance in harsh, industrialenvironments, and emphasize high reliability by supporting

features such as industrial-grade certifications (e.g., Class 1, Div.2/Zone 2, DNV, GL) for hazardous environments, built-in fiberfor remote connections, and extended operating temperaturemodels (-40 to 75˚C) for critical industrial applications.

2

3

5

4

6

7

8

9

10

11

12

Overview

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


Ordering Inform

ation

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


Features


The PowerTrans series of Ethernet switches features the highest level of reliability and availability for substation communications. Take advantage of superior EMI/RFI shielding, a -40 to 85°C operating range, and redundant media and power for challenging substation environments. Maximum flexibility is achieved with a ruggedized, modular, rackmount design that provides a high

density of optical fiber ports and Gigabit ports. The PowerTrans switches are suitable for retrofitting existing networks, and for creating new substation networks.

IEC 61850-3 and IEEE 1613 compliant

Meets NEMA TS2, EN50155, EN50121-4 standards

Layer 2 and Layer 3 modular, rack-mountable switches for a scalable network solution

Faster network fault recovery (under 20 milliseconds)

Universal 24/48 VDC or 110/220 VDC/VAC redundant power supply

Modular design for flexible media combinations

Up to 22 fiber ports for EMI immunity and long-haul transmission

Fan-less cooling design, -40 to 85°C operating range

Layer 3 Modular Ethernet SwitchesPT-7828 24+4G-port

Modular Ethernet SwitchesPT-7710 8+2G-port

Modular Ethernet SwitchesPT-7728 24+4G-port

Smart Ethernet SwitchesPT-7324 22+2G-port


0


Active Ethernet I/OioLogik E2000 Series

Instant event reporting by TCP/UDP/e-mail/SNMP trap

Patented Click&Go logic for easy local control without programming

API for VB (Windows) and C (Windows, WinCE, Linux)

Peer-to-Peer I/O without network controller

Variety I/O type and combination

Peer-to-Peer I/OioMirror E3210

Remote digital input mapped to local digital output over Ethernet

High speed peer-to-peer I/O

Quick and easy utility and web-based settings

Local alarm and remote alarm message

Modbus/TCP for remote monitoring

Modular Remote I/OioLogik 4000 Series

Full rage of digital and analog I/O modules

Expandable up to a maximum of 512 DIOs or 124 AIOs

Modular package for fast swap and maintenance

Standard Modbus/TCP/RTU/ASCII

Easy-to-use DLL library for user programming

Active Ethernet I/O is a new concept that upgrades PC-based data acquisition and control to proactive, automatic, condition-based reporting and control over networked I/O devices. This report-by-exception approach, which is new to PC-based I/O monitoring, requires far less bandwidth than traditional polling methods. The innovative features of Active Ethernet I/O make network communication between the host computer and Ethernet I/O server concise and efficient. You can expect your data

transmission speed to increase 20-fold compared to traditional SCADA systems, and critical sensor data can be obtained immediately without being subject to polling intervals. These great features make Active Ethernet I/O particularly well-suited to applications that require widely distributed I/O points.

2

3

5

4

6

7

8

9

10

11

12

Overview

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


Ordering Inform

ation

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches



Industrial Video ServersVPort 351 Series

Industrial design with -40 to 75˚C operating temperature and fiber optic Ethernet portUp to 30 frames/sec at full D1 (720 x 480) resolutionPre/post-alarm video recording function2-way (1 in/1 out) audio supported Class 1, Div. 2 certified for use in hazardous locations (Pending)

IP CameraVPort 25 Series

-40 to 50˚C operating temperature IP66-rated for protection from rain and dustOne camera lens for both day and night useDirect-wired power input and PoE for power redundancyUp to 30 frames/sec at 720 x 480 resolution

IP Surveillance SoftwareSoftNVR

Up to 64 channels in one systemDual monitor display capability for convenient viewingVideo analysis with motion and video loss detectionMultifunction playback system with intelligent searchLive viewing from all popular web browsers

Moxa’s VPort series of video networking solutions, which includes IP cameras and industrial video servers, are said to be the most robust in the industry for use in industrial and outdoor applications. These extremely compact video products can operate in a wide temperature range of -40 to 50°C or -40 to 75°C, and provide a rugged solution for a variety of harsh environments to ensure the reliability of your entire video system.

The industrial design and wide temperature range make the VPort series of industrial video networking products ideal solutions for video surveillance applications in facility management, unmanned substations, and transportation field sites.


0


0


Modular Ethernet Switches Managed Ethernet Switches Unmanaged Ethernet Switches

3 Gigabit 8 Gigabit PoE M12/IP67Layer 3 4 Gigabit 9 Gigabit 2 Gigabit 3 Gigabit

Model Name EDS-828 EDS-728 EDS-G509 EDS-518A EDS-516A EDS-510A EDS-508A EDS-505A EDS-408A/405A PX-1510 EDS-G308 EDS-P308 EDS-305-M12 EDS-316 EDS-309 EDS-308 EDS-305 EDS-208A/205A EDS-208/205

Modular design

Gigabit Ethernet Module √ √

Fast Ethernet Module √ √

Number of Ports

Total Number of Ports 28 28 9 18 16 10 8 5 8/5 10 8 8 5 16 9 8 5 8/5 8/5

Gigabit Ethernet, 10/100/1000Mbps 4 4 9 2 3 3 8

Max. 10/100/1000BaseT(X) 4 4 9 2 3 3 8

Max. 1000BaseSX/LX/LHX/ZX 4 4 5 2 3 3 2

Fast Ethernet, 10/100Mbps 24 24 16 16 7 8 5 8/5 7 7 8 5 16 9 8 5 8/5 8/5

Max. 10/100BaseT(X) 24 24 16 16 7 8 5 8/5 3 4 16 6 8 5 8/5 8/5

Max. 100BaseFX 24 24 2 2 2 2 2/2 2 2 3 2 1 1/--- 1/---

Max. Fast Ethernet,10/100Mbps, PoE 4 4

Max. Fast Ethernet, 10/100Mbps, M12/IP67 5

Power supply

24 VDC (12 to 45 VDC) √ √ √ √ √ √ √ √ √ √ √ √

24 VAC (18 to 30 VAC) √ √ √ √ √

24 VDC (12 to 48 VDC) √ √

48 VDC (46 to 50 VDC) √ √

12/24/48 VDC (9.6 to 60 VDC) √ √ √

Installation

DIN-Rail Mounting √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Panel Mounting √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Operating temperature

0 to 60˚C √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

-10 to 60˚C √ √

-40 to 75˚C √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Redundancy

Turbo Ring (Recovery Time < 20 ms) √ √ √ √ √ √ √ √ √ √

STP/RSTP √ √ √ √ √ √ √ √ √ √

Automatic Backup Configurator, ABC-01 √ √ √ √ √ √ √ √ √ √

Network management and control

Static Routing √

RIP V1/V2 √

IGMP/GMRP √ √ √ √ √ √ √ √ √

Port Trunking √ √ √ √ √ √ √ √ √

IEEE802.1X √ √ √ √ √ √ √ √ √

Port Lock √ √ √ √ √ √ √ √ √

SNMP/RMON √ √ √ √ √ √ √ √ √ √

VLAN √ √ √ √ √ √ √ √ √ √

QoS √ √ √ √ √ √ √ √ √ √

Relay Warning √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Regulatory approvals

CE/FCC √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

UL/cUL 60950-1 √ √ √ √ √ √ √ √ √ √ √/---

UL508 √ √ √ √ √ √ √ √ √ √ √ √

Class 1, Div. 2/ATEX Class 1, Zone 2 √ / √ / √ / √ / √/ √/ √

DNV/GL √ √ √ √ √ √ √ √ √ √

Selection Guide

Available Pending

Industrial Ethernet Switches Selection Guide

Industrial Ethernet Switches

2

3

5

4

6

7

8

9

10

11

12

Overview

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


Ordering Inform

ation

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

VideoNetworkingProducts0Industrial Ethernet SwitchesSelection Guide


Modular Ethernet Switches Managed Ethernet Switches Unmanaged Ethernet Switches

3 Gigabit 8 Gigabit PoE M12/IP67Layer 3 4 Gigabit 9 Gigabit 2 Gigabit 3 Gigabit

Model Name EDS-828 EDS-728 EDS-G509 EDS-518A EDS-516A EDS-510A EDS-508A EDS-505A EDS-408A/405A PX-1510 EDS-G308 EDS-P308 EDS-305-M12 EDS-316 EDS-309 EDS-308 EDS-305 EDS-208A/205A EDS-208/205

Modular design

Gigabit Ethernet Module √ √

Fast Ethernet Module √ √

Number of Ports

Total Number of Ports 28 28 9 18 16 10 8 5 8/5 10 8 8 5 16 9 8 5 8/5 8/5

Gigabit Ethernet, 10/100/1000Mbps 4 4 9 2 3 3 8

Max. 10/100/1000BaseT(X) 4 4 9 2 3 3 8

Max. 1000BaseSX/LX/LHX/ZX 4 4 5 2 3 3 2

Fast Ethernet, 10/100Mbps 24 24 16 16 7 8 5 8/5 7 7 8 5 16 9 8 5 8/5 8/5

Max. 10/100BaseT(X) 24 24 16 16 7 8 5 8/5 3 4 16 6 8 5 8/5 8/5

Max. 100BaseFX 24 24 2 2 2 2 2/2 2 2 3 2 1 1/--- 1/---

Max. Fast Ethernet,10/100Mbps, PoE 4 4

Max. Fast Ethernet, 10/100Mbps, M12/IP67 5

Power supply

24 VDC (12 to 45 VDC) √ √ √ √ √ √ √ √ √ √ √ √

24 VAC (18 to 30 VAC) √ √ √ √ √

24 VDC (12 to 48 VDC) √ √

48 VDC (46 to 50 VDC) √ √

12/24/48 VDC (9.6 to 60 VDC) √ √ √

Installation

DIN-Rail Mounting √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Panel Mounting √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √


0 to 60˚C √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

-10 to 60˚C √ √

-40 to 75˚C √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

Redundancy

Turbo Ring (Recovery Time < 20 ms) √ √ √ √ √ √ √ √ √ √

STP/RSTP √ √ √ √ √ √ √ √ √ √

Automatic Backup Configurator, ABC-01 √ √ √ √ √ √ √ √ √ √


Static Routing √

RIP V1/V2 √

IGMP/GMRP √ √ √ √ √ √ √ √ √

Port Trunking √ √ √ √ √ √ √ √ √

IEEE802.1X √ √ √ √ √ √ √ √ √

Port Lock √ √ √ √ √ √ √ √ √

SNMP/RMON √ √ √ √ √ √ √ √ √ √

VLAN √ √ √ √ √ √ √ √ √ √

QoS √ √ √ √ √ √ √ √ √ √

Relay Warning √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √


CE/FCC √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

UL/cUL 60950-1 √ √ √ √ √ √ √ √ √ √ √/---

UL508 √ √ √ √ √ √ √ √ √ √ √ √

Class 1, Div. 2/ATEX Class 1, Zone 2 √ / √ / √ / √ / √/ √/ √

DNV/GL √ √ √ √ √ √ √ √ √ √


0


Rackmount Ethernet Switches

Layer 3 4 Gigabit 2 Gigabit 2 Gigabit 2 Gigabit 2 Gigabit

Model Name PT-7828 PT-7728 PT-7710 PT-7324 IKS-6726 IKS-6324

Layer 3

Static Routing √

RIP V1/V2 √

Modular design

Gigabit Ethernet module √ √ √ √ √ √

Fast Ethernet module √ √ √ √ √ √

Number of Ports

Total Number of Ports 28 28 10 24 26 24

Gigabit Ethernet, 10/100/1000Mbps 4 4 2 2 2 2

Max. 10/100/1000BaseT(X) 4 4 2 2 2 2

Max. 1000BaseSX/LX/LHX/ZX 4 4 2 2 2 2

Fast Ethernet, 10/100Mbps 24 24 8 24 24 24

Max. 10/100BaseT(X) 24 24 0/2/4/8 22 24 22

Max. 100BaseFX 18 18 8 2 16 2

Power supply

24 VDC (18 to 36 VDC), isolated √ √ √

48 VDC (36 to 72 VDC), isolated √ √ √

24/48 VDC (9 to 60 VDC) √ √ √

88-300 VDC or 85-264 VAC, isolated √ √ √ √ √ √

Installation

Rack mounting √ √ √ √ √ √

Wall Mounting √


-40 to 85˚C √ √ √ √

-40 to 75˚C √ √

Redundancy

Turbo Ring √ √ √ √

STP/RSTP √ √ √ √

Automatic Backup Configurator, ABC-01 √ √ √ √


Web broswer √ √ √ √ √

Window Utility Setting √ √ √ √

IGMP/GMRP √ √ √ √

Port Trunking √ √ √ √

IEEE802.1X √ √ √ √

Port Lock √ √ √ √

SNMP/RMON √ √ √ √

802.1Q VLAN √ √ √ √

Port-based VLAN √ √ √

QoS √ √ √ √ √


CE/FCC √ √ √ √ √ √

UL/cUL 60950-1

EMC Complince

IEC 61850-3 (Power Substation)

IEEE 1613 (Power Substation)

NEMA TS2 (Traffic Control System) √ √ √ √ √ √

EN 50121-4 (Railway Applications)

DNV/GL

Available Pending

Selection GuideIndustrial Ethernet Sw

itches

2

3

5

4

6

7

8

9

10

11

12

Overview

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


Ordering Inform

ation

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

VideoNetworkingProducts0Industrial Wireless EthernetSelection Guide


Industrial Wireless Ethernet Selection GuideIndustrial Wireless Ethernet

Model Name AWK-3121 AWK-1200-AP AWK-1200-AC AWK-1100

WLAN

IEEE 802.11g/b (wireless LAN) √ √ √ √IEEE 802.3u (10/100M Ethernet LAN) √ √ √ √IEEE 802.3af (Power-over-Ethernet) √ √ √ √IEEE 802.1d (Spanning Tree Protocol) √Frequency 2.4 and 5 GHz 2.4 GHz

Modulation

11b: DBPSK, DQPSK, CCK11g: OFDM with BPSK, QPSK, 16QAM,64QAM11a: OFDM with BPSK, QPSK, 16QAM,64QAM

11b: DBPSK, DQPSK, CCK11g: OFDM

Channels

11b/g: US: 11 channelsEU: 12 channelsJP: 14 channels

11a: US: 12 channelsEU: 19 channelsJP: 19 channels

US: 11 channelsEU: 12 channelsJP: 14 channels

Security64-bit and 128-bit WEP encryption, WPA/WPA2 (IEEE 802.1X/RADIUS and TKIP),Hide SSID

WEP, WPA, WPA2, IEEE 802.1X, MAC address fi ltering, Hide SSID

64-bit and 128-bit WEPencryption, WPA

64-bit and 128-bit WEPencryption, WPA (IEEE 802.1X/RADIUS and TKIP), Hide SSID

802.11b Data Rates (Mbps) 1, 2, 5.5, 11

802.11g Data Rates (Mbps) 6, 9, 12,18, 24, 36, 48, 54

802.11a Data Rates (Mbps) 6, 9, 12,18, 24, 36, 48, 54

Confi gurationWeb-based management

Console managementWeb-based management

Interface

Antenna2 dBi dual-band omni-directional antennawith an RP-SMA connector

5 dBi External / N-typeconnector

9 dBi Internal 2 dBi omni-directional antennawith an RP-SMA connector

RJ45 Port 10/100BaseT(X) auto negotiation

Alarm Contact √

Digital Inputs 2

Console RS-232 (RJ45)

Power Requirements

Power Input ±12-48 VDC or 48 VDC (PoE) 48 VDC (PoE) 48 VDC (PoE) 12-45 VDC or 48 VDC (PoE)

Number of Power Inputs 3 1 1 3

Overload Current Protection √ √

Reverse Polarity Protection √ √

Physical Characteristics

Casing metal, IP30 protection IP68 protection IP67 protection metal, IP30 protection

Dimensions53.6 x 135 x 105 mm

(2.11 x 5.31 x 4.13 in.)284.4 x 254.3 x 77.5 mm(11.20 x 10.01 x 3.05 in.)

165.8 x 195.8 x 60.3 mm(6.53 x 7.71 x 2.37 in.)

53.6 x 135 x 105 mm(2.11 x 5.31 x 4.13 in.)

Installation Options DIN-Rail mounting, wall mounting Wall or Mast Mounting Wall or Mast Mounting DIN-Rail mounting, wall mounting

Environmental Limits

Operating TemperatureStandard models: 0 to 60°C (32 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to167°F)

-20 to 70°C (-4 to 158°F) 0 to 60°C (32 to 140°F)

Storage Temperature -40 to 85°C (-40 to 185°F) -40 to 80°C (-40 to 176°F)-20 to 70°C (-4 to 158°F)(2.11 x 5.31 x 4.13 in.)

Ambient Relative Humidity 5% to 95% (non-condensing)

Regulatory Approval

CE √ √ √ √

FCC √ √ √ √

SafetyEN60950-1: 2001, UL60950-1, UL508,

UL2043 (pending)EN60950-1: 2001, UL60950-1

Hazardous LocationUL/cUL Class I, Division 2, Groups A, B, C,and D (pending); ATEX Class I, Zone 2, Ex nC IIC (pending)

UL/cUL Class I, Division 2, GroupsA, B, C and D; ATEX Class I, Zone 2, Ex nC IIC (pending)

Radio EN300 328-1/-2

EMC EN301 489-1/-17

EMI FCC Part 15.247

Reliability

Warranty 5 years (see www.moxa.com/warranty)

Available Pending ▲ Optional kit buying is required


0


Model Name ioLogik E2210 ioLogik E2212 ioLogik E2214

Digital Input

Channels 12 8 6

Modes DI or Event Counter

Dry Contact Yes

Wet Contact Source Type, 24 VDCSource/sink selectable,

24 VDCSource/sink selectable,

24 VDC

COM 1 2 2

Isolation 3K VDC/2K Vrms

Digital Output

Channels 8 8 6 Relay Output, Normal Open

Modes DO or Pulse Output DO or Pulse Output DO or Pulse Output

Current 200 mA/channel 200 mA/channel

Contact rating 5A/30 VDC, 5A/240 VAC, 5A/110 VAC

Inductance Load : 2AResistance Load : 5A

Protection Over current limit, over temperature shutdown

Configurable DI/DO

Channels - 4 -

Common Specifications

Interface 10/100Mbps Ethernet

Protocols Modbus/TCP, Bootp, DHCP, SNMP, HTTP, SNTP

Security IP filtering

LCD display Optional, hot-pluggable

Software Management

Click&Go Logic

Yes


Dimension (W x H x D)

120.3 x 79 x 40.39 mm

Installation DIN-Rail mounting

Active Ethernet I/O Selection Guide

Selection Guide

Model Name ioLogik E2240

Analog Input

Channels 8, differential

Resolution 16-bit

Modes±150 mV, ±500 mV, ±5V, ±10V,

0 to 20 mA, 4 to 20 mA

Sampling RateVoltage: 10 sample/sec Current: 6 sample/sec


Analog Output

Channels 2

Resolution 12-bit

Modes 0 to 10V, 4 to 20 mA

Accuracy+/- 0.1% FSR @ 25˚C

+/- 0.3% FSR @ -10 & 60˚C



ProtocolsModbus/TCP, Bootp, DHCP,

SNMP, HTTP, SNTP



Software Management

Click&Go Logic Yes



120.3 x 79 x 40.39 mm


Model Name ioLogik E2242

Analog Input

Channels 4, differential

Resolution 16-bit

Modes ±150 mV, ±500 mV, ±5V, ±10V,

0 to 20 mA, 4 to 20 mA

Sampling Rate 100 sample/sec


Digital Input

Modes DI or Event Counter

Dry Contact Yes

Wet ContactSource/sink selectable,

24 VDC

COM 2


Digital Output

Mode DO or Pulse Output

Current 200 mA/channel

ProtectionOver current limit,

over temperature shutdown

Configurable DI/DO

Channels 12




SNMP, HTTP, SNTP



Software Management

Click&Go Logic Yes


Dimension(W x H x D)

120.3 x 79 x 40.39 mm


Active Ethernet I/O

Active Ethernet I/O

2

3

5

4

6

7

8

9

10

11

12

Overview

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


Ordering Inform

ation

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

VideoNetworkingProducts0Active Ethernet I/OSelection Guide


Active Ethernet I/O

Model Name ioLogik E2260 ioLogik E2262

Input

Channels 6 RTD 8, Thermocouple

Resolution 16-bit 16-bit

Modes PT, JPT, Ni, and Resistor J, K, T, E, R, S, B, N

Sampling Rate

12 sample/sec 10 sample/sec

Accuracy+/- 0.1% FSR @ 25˚C

+/- 0.3% FSR @ -10 & 60˚C+/- 0.1% FSR @ 25˚C

+/- 0.3% FSR @ -10 & 60˚C


Output

Channels 4 4

Modes D/O or Pulse Output D/O or Pulse Output

Current 200 mA/channel 200 mA/channel





Protocols Modbus/TCP, Bootp, DHCP, SNMP, HTTP, SNTP



Software Management

Click&Go Logic

Yes



120.3 x 79 x 40.39 mm


Serial Remote I/O

Model Name ioLogik R2110 Model Name ioLogik R2140

Digital Input Analog Input

Channels 12 Channels 8

Modes D/I or Event Counter Resolution 16-bit

Dry Contact Yes Modes ±150 mV, ±500 mV, ±5V, ±10V,

0 to 20 mA, 4 to 20 mA

Wet Contact Source Type, 24 VDCSampling Rate

Voltage: 10 sample/secCurrent: 6 sample/sec

Isolation 3K VDC/2K Vrms Isolation 3K VDC/2K Vrms

Digital Output Analog Output

Channels 8 Channels 2

Modes DO or Pulse Output Resolution 12-bit

Current 200 mA/channel Modes 0 to 10V, 4 to 20 mA


over temperature shutdownAccuracy

+/- 0.1% FSR @ 25˚C+/- 0.3% FSR @ -10 & 60˚C

Common Specifications Common Specifications

InterfaceRS-485 (2-wire)

From 1200 to 115, 200KbpsInterface

RS-485 (2-wire) From 9600 to 115, 200Kbps

Protocols Modbus/RTU Protocols Modbus/RTU

LCD display Optional, hot-pluggable LCD display Optional, hot-pluggable

Physical Characteristics Physical Characteristics


120.3 x 79 x 40.39 mmDimension(W x H x D)

120.3 x 79 x 40.39 mm

Installation DIN-Rail mounting Installation DIN-Rail mounting

Peer-to-Peer I/O

Model Name ioMirror E3210

Digital Input

Channels 12

Modes Digital Input

Dry Contact Yes

Wet Contact Source Type, 24 VDC


Digital Output

Channels 8

Modes Digital Output

Current 200 mA/Channel






HTTP, SNTP


LCD displayOptional, hot-pluggable

attachement

Software Management

ioMirror Yes


Dimension(W x H x D)

120.3 x 79 x 40.39 mm



0


Selection Guide

Industrial Video Servers IP Camera

Model Name VPort 351 VPort 3310 VPort D351 VPort 251 VPort 2141 VPort 25

Type Encoder Encoder Decoder Encoder Encoder Fixed Dome IP Camera

Channel Number

Video Input 1 1 0 1 4 0

Video Output 1 1 1 0 0 1

Aduio Input 1 1 1 1 0 1

Audio Output 1 0 1 1 0 1

Algorithmn

MJPEG √ √ (Decode) √ √ √

MPEG4 √ √ √ (Decode) √ √

Video Performance

QCIF (NTSC: 176 x 120, PAL: 176 x 144) max. 30 FPS max. 30 FPS

QVGA (NTSC: 320 x 240, PAL: 320 x 288) max. 30 FPS max. 30 FPS max. 30 FPS max. 30 FPS

CIF (NTSC: 352 x 240, PAL: 352 x 288) max. 30 FPS max. 30 FPS max. 30 FPS max. 30 FPS max. 30 FPS max. 30 FPS

VGA (NTSC: 640 x 480, PAL: 640 x 576) max. 30 FPS max. 10 FPS max. 30 FPS max. 30 FPS max. 30 FPS

4CIF (NTSC: 704 x 480, PAL: 704 x 576) max. 30 FPS max. 10 FPS max. 30 FPS max. 30 FPS max. 10 FPS max. 30 FPS

Full D1 (NTSC: 720 x 480, PAL: 720 x 576) max. 30 FPS max. 30 FPS max. 30 FPS max. 30 FPS

Quad View max. 10 FPS

Network Connection

10/100BaseT(X) √ √ √ √ √ √

100BaseFX √

COM Port

COM Port for PTZ Control 1 1 1 1 2 1

RS-232 Console Port 1 0 1 1 0 0

Alarm

VMD (Video Motion Detection) √ √ N/A √ √ √

Digital Input 2 2 2 1 4 1

Relay (Digital) Output 2 2 2 1 4 1

Alarm Recorded Video √ N/A

Alarm Snapshot Image √ √ N/A √ √ √

Operating Temperature

0 to 60˚C℃ √ √ √ √ √

-40 to 75˚C℃ √ √ -40 to 50˚C

Power

Power Input 2 (Redundant) 2 (Redundant) 2 (Redundant) 1 2 1

Power Output 0 0 0 1 (Loop) 1 0

Power-over-Ethernet √

Network Management and Control

Web Broswer √ √ √ √ √ √

SNMP Protocols √ √ √ √ √

RTSP (Real Time Streaming Protocol) √ √ √ √ √

Multicast (IGMP) √ √ N/A √ √

UPnP √ √ √ √ √ √

DDNS √ √ √ √ √

PPPoE √ √

IP Filtering √ √ √ √ √ √

Form Factor

Harden Protection IP30 IP30 IP30 N/A N/A IP66

DIN-Rail Monuting √ √ √ ▲ ▲Pannel Mounting ▲ ▲ ▲ √ √ √

Regulatory Approvals

CE/FCC √ √ √ √ √ √

UL508 √ √

Class 1, Div 2/ATEX Class 1, Zone 2

Available Pending ▲ Optional kit buying is required

Video Networking Products Selection Guide

Video Netw

orking Products

2

3

5

4

6

7

8

9

10

11

12

Overview

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


Ordering Inform

ation

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

VideoNetworkingProducts0Industrial Media ConvertersSelection Guide


Ethernet to Fiber Converters

Gigabit

Model Name IMC-101G IMC-101 IMC-21 100Mega IMC-21 10Mega

Number of Ports

Total Number of Ports 2 2 2 2

Gigabit Ethernet, 10/100/1000Mbps 2

Max. 10/100/1000BaseT(X) 1

Max. 1000BaseSX/LX/LHX/ZX 1

Fast Ethernet, 10/100Mbps 2 2

Max. 10/100BaseT(X) 1 1

Max. 100BaseFX 1 1

Ethernet, 10Mbps 2

Max. 10BaseT 1

Max. 10BaseFL 1

Power supply

24 VDC (12 to 45 VDC) √ √ √

24 VDC (12 to 48 VDC) √

24 VAC (18 to 30 VAC) √ √

Installation

DIN-Rail Mounting √ √ √ √

Panel Mounting √ √


0 to 60˚C √ √

-10 to 60˚C √ √

-40 to 75˚C √ √

Network management

Relay Warning √ √


CE/FCC √ √ √ √

UL/cUL 60950-1 √ √ √

UL508 √ √ √ √

UL/cUL Class 1, Div. 2 , ATEX Class 1, Zone 2 √

DNV/GL √

Available Pending

Industrial Media Converters Selection Guide


0


Power Automation

Why Moxa?

IEC 61850-3 and IEEE 1613 compliant for challenging and high-•voltage substations.Turbo Ring media redundancy with faster ring recovery (< 20 ms at •250 Ethernet switches).Redundant power inputs at 24/48 VDC or 110/220 VDC/VAC.•Completely fan-less design in a -40 to +85ºC operating temperature •range and 19-inch rackmount installation.Versatile mixed-media modules with up to 22 fiber ports (18+4G •ports) for long-haul transmission and scalable Gigabit bandwidth.Layer 3 Ethernet switches support IP routing protocols for complex •T&D automation networks.

Network Requirements

Network devices that comply with IEC 61850-3 or IEEE 1613 •standards for best EMI shielding and error free communications.A redundant Ethernet infrastructure with secure data communication.•Fiber optic cabling for noise immunity, long-distance transmission, •and scalable bandwidth for future upgrades.Layer 3 routing capability for better network performance within •large-scale substation LANs.

IEC 61850-3 Compliant Communication Networks

A reliable and intelligent network is a key success factor for modern substation automation. Substations that transmit and distribute electric power over expansive territories are often located out of doors in areas subjected to high electromagnetic interference and extreme temperature conditions. The substation infrastructure must be capable of providing EMI protection, network redundancy, great reliability, and flexible deployment options for for high network availability and future upgrades.

In addition to reliability, coordination between the many standards and proprietary protocols used in substations is also a major requirement in developing power automation systems. To build standard communication protocols between different intelligent electronic devices (IEDs), the IEC 61850 communication standards must be deployed based on Ethernet technology for better extensibility and interoperability.

Key Products

Fiber Optic Cable

PT-7710 8+2G-port Rackmount Gigabit Modular Ethernet Switch

PT-7324 22+2G-port Rackmount Gigabit Smart Ethernet Switch

PT-7828 Layer 3 24+4G-port Rackmount Gigabit Modular Ethernet Switch

PT-7728 24+4G-port Rackmount Gigabit Modular Ethernet Switch

Power Autom

ationApplication

2

3

5

4

6

7

8

9

10

11

12

Overview

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


Ordering Inform

ation

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches



Transportation Network Communication

Why Moxa?Industrial managed switches supporting redundant Ethernet rings •that recover within 20 ms.VPort industrial video servers that convert analog video signals into •high performance digital video for IP network transmission.M12 connectors ensure a tight connection to keep the Ethernet •switch running nonstop, even when subjected to incessant vibration.Industrial certifications such as UL508, NEMA TS2, and EN50155.•Advanced networking features such as VLAN, QoS, IGMP snooping, •RMON, bandwidth control, and SNMP-OPC server.

Key Products

System RequirementsGigabit network infrastructure for large bandwidth and high •transmission speeds.Redundant network topologies to guarantee continuous network •transmission.Reliable communication network over long distances.•Video, voice, and data transmission over one IP network.•Devices with rugged hardware design that can withstand wide •operating temperatures, humidity, vibration, and EMC factors.Special certifications such as NEMA TS2 and EN50155, for devices in •certain roadway and railway applications.

Industrial Ethernet for Optimization of Transportation NetworkIn modern transportation systems, real-time traffic management and environmental monitoring requires the installation of more and more pieces of equipment, such as PLCs, traffic controllers, LED displays, IP phones, and video cameras. Transportation systems have turned to TCP/IP networks as the main transmission media for equipment data and signals, in order to benefit from lower installation costs and greater system centralization.

With the large volume of data, video, and even voice that must be transmitted, transportation networks require enough bandwidth to ensure real-time monitoring and response. One attractive option is using a redundant Gigabit network infrastructure. All devices in a transportation system should be accessible for monitoring and control over a single network. Within the transportation system, video, voice, and data should all be transmitted over the TCP/IP network for easy, centralized control.

EDS-G509 9G-port Full Gigabit Managed Ethernet Switch

IKS Series Rackmount Ethernet Switch

EDS-305-M12 5-port IP67/M12 Unmanaged Ethernet Switch

ioLogik 4000 Modular Remote I/O

ioLogik E2214 Active Ethernet I/O with 6 DI, 6 Relay Outputs

VPort 351 1-channel MPEG4/MJPEG Industrial Video Encoder

Fiber Optic Cable

Transportation Network CommunicationApplication



0

Oil & Gas Monitoring System

Why Moxa?

Turbo Ring redundant technology with network recovery time •within 20 ms.Single mode or multi mode fiber for long distance transmission.•Class 1, Division 2/Zone 2 approvals for IMC-101 media converters •and many Ethernet switches in the EDS line.Event-driven warnings by e-mail or relay output for anomalous •behavior or network failure.High MTBF due to fanless design and low power consumption.•T models for reliable operation in extreme temperature conditions •(from -40 to 75°C).


Centralized monitoring and control over a fast redundant Ethernet •ring with fiber optic cabling.Certification for safe operation in hazardous conditions, such as •Class 1, Division 2/Zone 2.Rugged protection for reliable operation in wide temperature •conditions or outdoors.Advanced network management including QoS, IGMP snooping/•GMRP, VLAN, LACP, SNMPv1/v2c/v3, and RMON.

Using Industrial Ethernet Networks to Ensure Safety and Reliability

Extracting oil and gas requires the implementation of sophisticated technologies. A broad range of operations and sites are employed, such seabed and desert installations, production facilities, pipe line transportation, tanker storage, and petrochemical plants. Production processes can be centrally monitored and controlled using industrial Ethernet networks, which feature open standards, real-time transmission capability, reliable media redundancy, and rugged features.

Safety is always a critical matter and cannot be compromised, especially in the oil and gas industry, which involves the production, processing, and storage of highly flammable substances. Sites are classified according to potential dangers, such as an explosive atmosphere or flammable conditions. Before installing any equipment, administrators must carefully confirm that each device’s classification is appropriate for the site. Strict adherence to safety directives such as the UL/cUL Class 1 Division 2, ATEX IIG3 C1Z2 type approvals, along with the associated certifications for devices used in hazardous locations, is extremely important for creating a safe system.

Key Products

EDS-728 24+4G-port Gigabit Modular Managed Ethernet Switch

EDS-516A/508A/505A 16-, 8-, or 5-port Managed Ethernet Switch

EDS-408A/405A 8- or 5-port Entry-level Managed Ethernet Switch

EDS-316/309/308/305 16-, 9-, 8-, or 5-port Unmanaged Ethernet Switch

IMC-101 Industrial Ethernet to Fiber Media Converter


Fiber Optic Cable

Oil & G

as Monitoring System

Application


2

3

5

4

6

7

8

9

10

11

12

Overview

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


Ordering Inform

ation

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


Ethernet in Maritime & Offshore

Why Moxa?Moxa’s EDS line of industrial Ethernet switches and IMC-101 media •converters have obtained GL & DNV type approval for safe and reliable operation in maritime environments.Moxa’s Turbo Ring provides media redundancy with a recovery time •of less than 20 ms, ensuring a reliable and stable network.EDS switches are rated to operate at temperatures from 0 to 60°C, •and the extended operating temperature models are rated for -40 to 75°C.Moxa’s managed Ethernet switches support advanced networking •technology, including VLAN, QoS, IGMP snooping, bandwidth control, SNMP-OPC server, RMON, and automatic warning by event.

Key Products

Network RequirementsDNV/GL type approval for all network device. •Ability to withstand harsh temperature, humidity, vibration, and EMC •conditions.High-bandwidth fiber optic Ethernet backbone with redundant •network topology. Reliable operation in extreme temperatures.•Manageable real-time alert system for exception-type events.•

Safeguarding the Life and Property in Marine Environments

In recent years, communication networks for maritime applications have received a boost from the trend of using Ethernet networks to integrate the operation of distributed systems. Examples include battleships, ocean liners, offshore drilling platforms, tide-power generation systems, and offshore windmill farms. The devices used in these environments are able to withstand harsh conditions, such as humidity, vibration, and EMC factors, all of which can quickly result in equipment damage, malfunction, or failure. How to choose a qualified Ethernet device has became a top issue.

DNV certification establishes the suitability of products for use in maritime and offshore environments. DNV helps the maritime industry manage risk in all phases of a ship’s life, and DNV certification for devices used as part of maritime and offshore applications is highly coveted. Moxa’s Ethernet switches have obtained DNV & GL certification, verifying their suitability for use in critical maritime workplaces, such as on ships and offshore platforms.

Fiber Optic Cable

Twisted Pair Cable

EDS-728 24+4G-port Gigabit Modular Managed Ethernet Switch

EDS-518A/510A 16+2G- or 7+3G-port Gigabit Managed Ethernet Switch

EDS-516A/508A/505A 16-, 8-, or 5-port Managed Ethernet Switch

EDS-408A/405A 8- or 5-port Entry-level Managed Ethernet Switch

EDS-316/309/308/305 16-, 9-, 8-, or 5-port Unmanaged Ethernet Switch

IMC-101 Industrial Ethernet to Fiber Media Converter

Ethernet in Maritime & OffshoreApplication


0


Ethernet in Security Monitoring

Ethernet in Security Monitoring

Why Moxa?Active Ethernet I/O reduces network bandwidth with “report by •exception.”Use Active Ethernet I/O to send critical sensor data immediately •instead of being subject to polling intervals.Active Ethernet I/O can achieve real-time monitoring through pro-•active event messages with time-stamp.VPort industrial video servers convert analog video signals into high •performance digital video for IP network transmission.Industrial managed Ethernet switches support redundant Ethernet •rings that recover within 20 ms to ensure non-stop network connections.

Key Products


Video, voice, and data transmission over one IP network.•Less network traffic through report-by-exception approach for the •efficient use of Ethernet bandwidth.Time-stamped data for I/O device status.•Solutions for redundant Gigabit Ethernet infrastructures with large •bandwidth requirements.Easy integration with open protocols, including TCP, UDP, and SNMP.•Reliable communication networks over long distances.•

Enhancing Real-time Monitoring for Video Surveillance

The demand for video surveillance systems that specialize in security monitoring is on the increase, and with the widespread popularity of industrial Ethernet, IP-based video surveillance is gradually becoming the preferred alternative to traditional DVR surveillance systems.

Generally speaking, surveillance monitoring requires the simultaneous transmission of video, voice, and data over a single network, which means that using bandwidth efficiently is particularly important if surveillance systems are to achieve real-time monitoring. However, the challenge is even greater if the system also includes a large number of I/O applications. Traditional I/O solutions are extremely bandwidth-hungry, and require the frequent polling of passive I/O servers. Because of this, engineers are always on the lookout for efficient ways of reducing network loads. Moxa’s Remote I/O solution, called Active Ethernet I/O, is a new concept for PC-based data acquisition and control. Unlike traditional I/O servers, the non-polling architecture of Active Ethernet I/O requires far less bandwidth, and can automatically report and control I/O status based on user-specified conditions. By using Moxa’s I/O solutions, you can conserve precious bandwidth, and as a result make your surveillance and monitoring applications more efficient, and more real-time.

Fiber Optic Cable

Twisted Pair Cable

I/O Connectivity

ioLogik E2210 Active Ethernet I/O with 12 DI, 8 DO

ioMirror E3210 Ethernet Peer-to-Peer I/O with 8 DI, 8 DO

EDS-510A 7+3G-port Gigabit Managed Ethernet Switch


VPort 25 Fixed Dome IP Camera for Outdoors

VPort SDK User-friendly Software Development Kit

Application


EDS-828 24+4G-port Layer 3 Gigabit modular managed Ethernet switch 1-7

EDS-728 24+4G-port Gigabit modular managed Ethernet switch 1-9

IM Series Gigabit Ethernet and fast Ethernet interface modules 1-11

Modular Managed Ethernet Switches


1




1

Modular M

anaged Ethernet Switches

Solution Tutorial

Scalable Gigabit Modular PlatformDelivers Flexible Mixtures of Media and Bandwidth

Up to 26 Remote Devices

Gigabit Fiber Optic Cable (1000BaseSX/LX/LHX/ZX)Fiber Optic Cable (100BaseFX)Twisted Pair Cable (10/100BaseT(X) or 10/100/1000BaseT(X))

Gigabit Managed Ethernet Switch

EDS-728

EDS-728

Video Server

Gigabit Turbo Ring

Video-over-IP Server Farm

EDS-828 24+4G-port Layer 3 Gigabit Modular Managed Ethernet Switch

EDS-728 24+4G-portGigabit Modular Managed Ethernet Switch

Gigabit Turbo Ring


0

2

1

5

4

6

8

9

10

12

OverviewM

anagedEthernetSwitches

Unmanaged

EthernetSwitches

Modular

Ethernet Switches

Rackmount

EthernetSwitches

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

VideoNetworkingProducts

Media


OrderingInform

ation

11

7

3

Solution TutorialModular Managed Ethernet Switches

Layer 3 switches have optimized hardware to pass data as fast as Layer 2 switches, yet they use the IP address for making a switching decision at Layer 3, just like a router. The 802.1Q VLAN of a Layer 2 switch allows network operators to configure and maintain the network more effectively, but cross VLAN communication still relies on traditional Layer 3 routers. Both routers and Layer 3 switches use a routing protocol and routing table to determine the best path. However, compared to router

What is a Layer 3 Switch?

Instead of using a Layer 2 Ethernet switch MAC table, the EDS-828 series has a built-in IP routing table to support forwarding IP frames. Network administrators need to configure and maintain this IP routing

table totally manually. Any change in the network topology will also require the network administrator to reconfigure the routing table.

Static Routing

In addition to static routing, the EDS-828 has a built-in IP routing table that can be set up and updated dynamically by routing protocol. RIP is an often used routing protocol that uses the Bellman-Ford algorithm

and “hop count” measurement to determine how packets should be routed from one network to another.

Routing Information Protocol (RIP)

The EDS-828 series also supports OSPF, which uses “Link State” instead of “hop count” to determine the network route. OSPF is more complicated than RIP. However, compared to RIP, OSPF has faster

network convergence and less network traffic. Both RIP and OSPF are usually referred to as Interior Gateway Protocols (IGP).

Open Shortest Path First (OSPF)

LAN A

LAN B

Layer 3 Switch

The EDS-828 built-in IP routing table can be updated and maintained both statically and dynamically. If the network is small and fixed, the network administrator may configure the IP routing table manually. However, any network topology change will require the network administrator to reconfigure the settings manually. If the network is extended or the network topology is changed frequently, using

dynamic routing can efficiently enhance network stability and reduce the time it takes to effect network convergence. Dynamic routing protocol allows devices to detect and respond to network changes automatically. In this case, network administrators do not need to reconfigure the settings after the network changes.

Static versus Dynamic

Intelligent Layer 3 Network Control

that is usually software-based, Layer 3 switches are relatively faster and less expensive due to built-in switching hardware with optimized chips and full-wire speed IP frame forwarding performance suitable for VLAN interconnection. Moxa’s Layer 3 switch can be used to partition a large-scale LAN into multiple subnets for better network performance.



1

Modular M


Up to 8 ports can be assigned to one trunk group

Device without IEEE 802.1X authorization

Device with IEEE 802.1X authorizationRADIUS

HTTPS/SSH

The EDS-828/728 Ethernet switches support IEEE 802.1D-1998 GMRP (GARP Multicast Registration Protocol) and IGMP snooping to provide the ability to prune multicast traffic so that the traffic only travels to those end destinations that require this kind of traffic. As a result, the amount of traffic on the Ethernet LAN is reduced.

In order to protect data from being intercepted, the EDS-828/728 Ethernet switches support the HTTPS and SSH protocols for transferring data over the Internet in an encrypted form. If you are changing the configuration of an Ethernet switch online, please make sure that it is done over HTTPS and SSH so that the data remains secure.

Gigabit Ethernet Redundant Ring and Ring Coupling Capability

Port Trunking for Flexible Network Connections

IEEE 802.1X Enhances User Authentication

IGMP Snooping and GMRP for Filtering Multicast Traffic

HTTPS and SSH Enhance Network Security

Gigabit Turbo Ring

Group 1 Multicast Stream Group 2 Multicast Stream

IGMP Group 2 IGMP Group 2IGMP Group 1 IGMP Group 1

Solution Tutorial

Ethernet has become the default data communications medium for industrial automation applications. In fact, it’s not uncommon for the transfer of video, voice, and high-rate industrial application data to be integrated into one network. Moxa’s EDS-828/728 series Ethernet switches, which come equipped with a redundant Gigabit Ethernet protocol called Gigabit Turbo Ring, give system maintainers a convenient means of setting up a versatile yet stable Gigabit Ethernet network.

IEEE 802.3ad (LACP, Link Aggregation Control Protocol) provides flexible network connections and a redundant path for critical devices. The EDS-828/728 Ethernet switches allow users to set up a wider communication path by aggregating up to four trunk groups in parallel. A maximum of eight ports can be assigned to one trunk group to optimize your network connection and redundant paths. When selected ports are grouped for trunking, LACP will exchange information to determine whether or not the ports selected in a group can be trunked together.

The EDS-828/728 series Ethernet switches support IEEE 802.1X (Port-based Network Access Control) to enhance user authentication. When IEEE 802.1X is activated, only authorized users can access the port. Authentication is done using the local user database or an external RADIUS server.

Advanced Layer 2 Network Management


0

2

1

5

4

6

8

9

10

12

OverviewM


Unmanaged

EthernetSwitches

Modular

Ethernet Switches

Rackmount

EthernetSwitches

Wireless


Peer-to-PeerI/O

Modular

Remote I/O


Media


OrderingInform

ation

11

7

3

Solution TutorialModular Managed Ethernet Switches

The Moxa SNMP OPC Server Pro software package can convert SNMP into OPC format. The vertical integration of SNMP management information into existing OPC-based SCADA-packages gives

customers the ability to establish an Ethernet network management application that is integrated with existing visualization and control applications.

VLANs can be used to overcome restrictions imposed by the physical network connections. In one respect, devices connected to different physical networks can be allowed to communicate easily by assigning them to the same VLAN. In addition, devices assigned to different VLANs will not be able to communicate with each other, providing

extra security and protection from unwanted invasion or traffic. The EDS-828/728 Ethernet switches support 802.1Q VLAN and GVRP protocol, which can exchange the same interoperable parameters to keep consistent VLAN settings over the entire network.

Quality of Service (QoS) provides a traffic prioritization capability to ensure that important data is delivered consistently and predictably. The EDS-828/728 series Ethernet switches can inspect IEEE 802.1p/1Q Layer 2 CoS tags, and even Layer 3 TOS information, to provide a

consistent classification of the entire network. The QoS capability of the EDS-828/728 Ethernet switches improve your industrial network’s performance, and increase determinism for mission-critical applications.

RMON (Remote Network Monitoring) is an IETF (Internet Engineering Task Force) standard monitoring specification that allows various network agents and console systems to exchange network monitoring data. RMON provides you with comprehensive network fault diagnosis,

planning, and performance-tuning information, and helps you manage your network in a more proactive manner. If configured correctly, RMON probes deliver information before problems occur, allowing you to take action before the problems affect users.

The EDS-828/728 series Ethernet switches not only prevent broadcast storms, but can also configure the rate limiting of unicast/multicast/

broadcast packets, and in this way gives administrators full control of limited bandwidth to prevent unpredictable faults.

In some cases, a network is so large that it is difficult to achieve the expected communications level. Industrial communications applications use more of a command-response style than the file-transfer style used in office network environments. This means that

when first setting up an industrial Ethernet network, control engineers may need to use a second port to monitor the actual activity between their devices and computer host. The EDS-828/728 series’ mirroring port function helps ensure that the system behaves as expected.

Warning by e-mail or SNMP Trap

The EDS-828/728 series Ethernet switches can send out a warning e-mail or SNMP trap when an exception is detected, providing system managers with real-time alarm messages.

Warning by Relay Output

The EDS-828/728 series Ethernet switches provide two relay outputs that can be set up to indicate events with different importance to notify

or warn engineers in the field, so the engineer can use the appropriate emergency maintenance procedures to respond quickly to higher priority messages.

DI to Integrate Other Important Sensors

With two digital inputs, the EDS-828/728 series Ethernet switches can integrate sensors into its automatic alarm mechanism, sending warning messages to an IP network by e-mail notification.

VLAN Eases Network Planning

QoS Increases Determinism

RMON for Efficient Network Monitoring and Proactive Capability

Bandwidth Management Prevents Unpredictable Network Status

Port Mirroring for Online Monitoring

Automatic Warning by Event

Network Management with Moxa SNMP OPC Server Software

Modular Design, Maximum Flexibility

Angled LED Display provides clear viewing from all vertical angles, making it easy to check the status of the switch and each port.

Separate LEDs for the system and interface modules show clearly the current status of the system and each port.

The Mode Switch shows the modes selected for the interface module, giving you an easy way to view the status of all the ports at one glance.

User Friendly LED Display



1

Modular M


Solution Tutorial

Flexible Fast Ethernet Module The EDS-828/728 series Ethernet switches let you install up to 24 fast Ethernet ports. Select from eight 4-port fast Ethernet modules with a combination of 10/100BaseT(X) (RJ45 connectors) and 100BaseFX (Single/Multi mode, SC/ST connectors). Long-haul single mode optical fiber can be used to provide 100 Mbps transmission over a distance of 40 km or 80 km.

Easy and Flexible Installation

Model

EDS-828 28 4 24 √ √ √ √ √ √ √ √ √ √ √

EDS-728 28 4 24 √ √ √ √ √ √ √ √ √ √

Innovative Modular Design

Scalable Gigabit Modular Solution 100 Mbps of bandwidth is not enough to meet the requirements posed by industrial Ethernet applications that involve transmitting both voice and video. The EDS-828/728 series Ethernet switches, with their four Gigabit ports and Gigabit Turbo Ring, can give you a reliable and high performance backbone. Select from two different 2-port Gigabit modules to meet current needs or prepare for future demands.

Tota

l Num

ber o

f Por

tsGi

gabi

t Eth

erne

t(1

0/10

0/10

00 M

bps)

Fast

Eth

erne

t(1

0/10

0 M

bps)

Rout

ing

(Sta

tic, R

IP V

1/V2

)Tu

rbo

Ring

RSTP

/STP

IGM

P sn

oopi

ng/G

MRP

Port

Trun

king

/LAC

P

IEEE

802

.1X/

HTTP

S/SS

H

Port

Lock

SNM

P/RM

ON

802.

1Q V

LAN

QoS

ABC-

01*

Comparison Chart for Modular Ethernet switches

Port Interface Features

DIN-Rail Mounting KitThe rugged and user-friendly DIN-Rail kit, which is easily installed with a flat-head screw driver, has passed stringent industrial vibration, freefall, and shock tests.

*ABC-01 is an RS-232 RJ45-based automatic backup configurator for Moxa’s managed Ethernet switches. Please check page 11-1 for detailed information.

Wall Mounting KitThe wall mounting kit provides users with a handy option that meets the requirements of many different industrial applications.


0

2

1

5

4

6

8

9

10

12

OverviewM


Unmanaged

EthernetSwitches

Modular

Ethernet Switches

Rackmount

EthernetSwitches

Wireless


Peer-to-PeerI/O

Modular

Remote I/O


Media


OrderingInform

ation

11

7

3


EDS-828 Series

IntroductionThe EDS-828 is a high-performance Layer 3 Ethernet switch designed for network routing, and the improved hardware technology built into the EDS-828 replaces the software logic used by traditional routers, offering better performance, and making the switch ideal for large-scale local area networks (LANs). In addition to Layer 3 features, the EDS-828 also supports Layer 2 management features, including

QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON, IEEE 802.1X, HTTPS, and SSH. In order to meet the demands of any industrial application, the EDS-828 uses a modular design that allows users to install up to 4 Gigabit Ethernet ports and 24 fast Ethernet ports, providing a high degree of flexibility for network expansion.

Layer 3 routing interconnects multiple LAN segments ›Static routing and RIP V1/V2 supported ›4 Gigabit plus 24 fast Ethernet ports for copper and fiber ›Gigabit Turbo Ring and RSTP/STP (IEEE 802.1w/D) for Ethernet ›redundancyQoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, ›RMON supportedIEEE 802.1X, HTTPS, and SSH to enhance network security ›

Features and BenefitsStatic routing and RIP V1/V2 to move data and information across •networksRedundant Gigabit Turbo Ring and RSTP/STP (IEEE 802.1w/D)•IGMP snooping and GMRP for filtering multicast traffic from •industrial Ethernet protocolsIEEE 802.1Q VLAN and GVRP protocol to ease network planning•QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism•Port Trunking for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•RMON for efficient network monitoring and proactive capability•

Bandwidth management prevents unpredictable network status•Lock port function for blocking unauthorized access based on MAC •addressPort mirroring for online debugging•Automatic warning by exception through e-mail, relay output•Digital inputs for integrating sensors and alarms with IP networks•Redundant, dual DC power inputs•IP30, rugged high-strength case•DIN-Rail or panel mounting capability•Configurable by Web browser, Telnet/Serial console, Windows •utility, and ABC-01 automatic backup configurator

TechnologyStandards: IEEE 802.3 for 10BaseT,

IEEE 802.3u for 100BaseT(X) and 100Base FX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,IEEE 802.3x for Flow Control,IEEE 802.1D for Spanning Tree Protocol,

IEEE 802.1w for Rapid STP,IEEE 802.1Q for VLAN Tagging,IEEE 802.1p for Class of Service,IEEE 802.1X for Authentication,IEEE 802.3ad for Port Trunk with LACP

Protocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, RIP V1/V2, HTTP, HTTPS, Telnet, SSH, SyslogMIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control

Switch PropertiesPriority Queues: 4Max. Number of Available VLANs: 64VLAN ID Range: VID 1 to 4094IGMP Groups: 256

Specifications

Layer 3 Modular Managed Ethernet Switch System, EDS-82810G

EDS-828

24+4G-port Layer 3 Gigabit modular managed Ethernet switch



1

Modular M


EDS-828

Dimensions (unit = mm)

Interface Fast Ethernet: 6 slots for any combination of 4-port interface module with 10/100BaseT(X) or 100BaseFX

Gigabit Ethernet: 2 slots for any combination of 2-port interface module with 10/100/1000BaseT(X) or 1000BaseSFP slot

Console: RS-232 (RJ45)System LED Indicators: STAT, PWR1, PWR2, FAULT, MASTER, COUPLER, T.RINGModule LED Indicators: LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEEDAlarm Contact: Two relay outputs with current carrying capacity of 1A @ 24 VDC Digital Inputs: Two inputs with the same ground, but electrically isolated from the electronics.

+13 to +30V for state “1”•-30 to +3V for state “0”•Max. input current: 8 mA •

Power RequirementsInput Voltage: 24 VDC (12 to 45 VDC), redundant dual inputsInput Current (@ 24 V): 0.96A Connection: Two removable 6-pin terminal blocks Overload Current Protection: PresentReverse Polarity Protection: Present

Physical Characteristics Casing: IP30 protectionDimensions (W x H x D): 362.4 x 142.47 x 128 mm (14.27 x 5.61 x 5.04 in.)Weight: 1950 gInstallation: DIN-Rail mounting, wall mounting (optional kit)

Ordering Information

Layer 3 Modular Managed Ethernet Switch System, EDS-82810GLayer 3 modular managed Ethernet switch system with 6 slots for 4-port fast Ethernet interface modules and 2 slots for 2-port Gigabit interface modules, up to 24+4G ports.

Optional AccessoriesABC-01:• Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro: • CD with EDS-SNMP OPC server software and manualDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-32: • Wall mounting kit for EDS-828/728 seriesRK-4U: • 4U-high 19” rack mounting kit

Front View Rear ViewSide View

EDS-82810G IM series (Gigabit or fast Ethernet)

Step 1: Select Ethernet switch system Step 2: Select interface modules

* The EDS-82810G switch system is delivered without interface module. Please see page 1-11 for product information of IM series Gigabit and fast Ethernet interface modules.

Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F)

Storage Temperature: -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity: 5 to 95% (non-condensing)

Regulatory Approvals Safety: UL508 (Pending), UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 (Pending)

Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending)

Maritime: DNV (Pending), GL (Pending)

EMI: FCC Part 15, CISPR (EN55022) class A

EMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 EN61000-4-12

Shock: IEC 60068-2-27

Freefall: IEC 60068-2-32

Vibration: IEC 60068-2-6

MTBF: 160,000 hrs Database: Telcordia (Bellcore), GB*Please check Moxa’s website for the most up-to-date certification status.

Warranty 5 years (see www.moxa.com/warranty for details)


0

2

1

5

4

6

8

9

10

12

OverviewM


Unmanaged

EthernetSwitches

Modular

Ethernet Switches

Rackmount

EthernetSwitches

Wireless


Peer-to-PeerI/O

Modular

Remote I/O


Media


OrderingInform

ation

11

7

3


EDS-728 Series

IntroductionThe EDS-728 modular Gigabit Ethernet switch features a versatile modular design that allows different combinations of fiber and copper modules, creating a wide array of connection options ideal for any automation network. The modular design lets you install up to 4 Gigabit ports and 24 fast Ethernet ports. The EDS-728 is specially designed for redundant Gigabit network backbones and uses a modular configuration to provide a high degree of flexibility for network

expansion. Top network performance, security, and reliability is assured through the EDS-728’s advanced management features, including QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON, IEEE 802.1X, HTTPS, and SSH. The EDS-728 also features industrial-grade construction, a console port for automatic configuration backup, and an angled LED troubleshooting panel that can be conveniently viewed from both horizontal and vertical orientations.

4 Gigabit plus 24 fast Ethernet ports for copper and fiber ›Gigabit Turbo Ring and RSTP/STP (IEEE 802.1w/D) for Ethernet ›redundancyQoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, ›RMON supportedIEEE 802.1X, HTTPS, and SSH enhance network security ›ABC-01 (Automatic Backup Configurator) for system configuration ›backup

Features and BenefitsRedundant Gigabit Turbo Ring and RSTP/STP (IEEE 802.1w/D)•IGMP snooping and GMRP for filtering multicast traffic from •industrial Ethernet protocolsIEEE 802.1Q VLAN and GVRP protocol to ease network planning•QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism•Port Trunking for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•RMON for efficient network monitoring and proactive capability•Bandwidth management prevents unpredictable network status•

Lock port for only authorized MAC address access•Port mirroring for online debugging•Automatic warning by exception through e-mail, relay output•Digital inputs to integrate sensors and alarms with IP networks•Redundant, dual DC power inputs•IP30, rugged high-strength case•DIN-Rail or panel mounting capability•Configurable by Web browser, Telnet/Serial console, Windows •utility, and ABC-01 automatic backup configurator


IEEE 802.3u for 100BaseT(X) and 100Base FX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,IEEE 802.3x for Flow Control,IEEE 802.1D for Spanning Tree Protocol,

IEEE 802.1w for Rapid STP,IEEE 802.1Q for VLAN Tagging,IEEE 802.1p for Class of Service,IEEE 802.1X for Authentication,IEEE 802.3ad for Port Trunk with LACP

Protocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, SyslogMIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control


SpecificationsModular Managed Ethernet Switch System, EDS-72810G

EDS-728




1

Modular M


EDS-728

Interface Fast Ethernet: 6 slots for any combination of 4-port interface module with 10/100BaseT(X) or 100BaseFXGigabit Ethernet: 2 slots for any combination of 2-port interface module with 10/100/1000BaseT(X) or 1000BaseSFP slot System LED Indicators: STAT, PWR1, PWR2, FAULT, MASTER, COUPLER, T.RINGModule LED Indicators: LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEEDAlarm Contact: Two relay outputs with current carrying capacity of 1A @ 24 VDC Digital Inputs: Two inputs with the same ground, but electrically isolated from the electronics.

+13 to +30V for state “1”•-30 to +3V for state “0”•Max. input current: 8 mA •

Power Requirements Input Voltage: 24 VDC (12 to 45 VDC), redundant dual inputsInput Current (@ 24 V): 0.96A Connection: Two removable 6-pin terminal blocks Overload Current Protection: PresentReverse Polarity Protection: Present

Physical Characteristics Casing: IP30 protectionDimensions (W x H x D): 362.4 x 142.47 x 128 mm (14.27 x 5.61 x 5.04 in.)Weight: 1950 gInstallation: DIN-Rail mounting, wall mounting (optional kit)

Environmental Limits Operating Temperature: 0 to 60°C (32 to 140°F)


Front View Rear ViewSide View


Modular Managed Ethernet Switch System, EDS-72810GModular managed Ethernet switch system with 6 slots for 4-port fast Ethernet interface modules and 2 slots for 2-port Gigabit interface modules, up to 24+4G ports.

Optional AccessoriesABC-01:• Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manualDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-32: • Wall mounting kit for EDS-828/728 seriesRK-4U:• 4U-high 19” rack mounting kit

EDS-72810G


* The EDS-72810G switch system is delivered without interface module. Please see page 1-11 for product information of IM series Gigabit and fast Ethernet interface modules.

IM series (Gigabit or fast Ethernet)

Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing)

Regulatory Approvals Safety: UL508 (Pending), UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 (Pending)Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending)Maritime: DNV (Pending), GL (Pending)EMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 EN61000-4-12 Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6MTBF: 160,000 hrs Database: Telcordia (Bellcore), GB *Please check Moxa’s website for the most up-to-date certification status.

Warranty5 years (see www.moxa.com/warranty for details)


0

2

1

5

4

6

8

9

10

12

OverviewM


Unmanaged

EthernetSwitches

Modular

Ethernet Switches

Rackmount

EthernetSwitches

Wireless


Peer-to-PeerI/O

Modular

Remote I/O


Media


OrderingInform

ation

11

7

3

2-port Gigabit Ethernet and 4-port fast Ethernet interface modules for EDS-828/728 series Ethernet switches


InterfaceLED Indicators: Port statusRJ45 Ports: 10/100/1000BaseT(X) auto negotiation speed and auto MDI/MDI-X connection

Fiber Ports: 1000BaseSFP slot* Please see page 2-23 for the product information of SFP-1G series Gigabit

Ethernet SFP modules.

Power RequirementsPower Consumption: IM-2GTX: 2.96W

IM-2GSFP: 3.042W

Physical Characteristics Dimensions (W x H x D): 24 x 65.9 x 101.1 mm (0.94 x 2.59 x 3.98 in.)Weight: IM-2GTX: 150 g IM-2GSFP: 148 g

InterfaceLED Indicators: PWR, P1, P2, P3, P4 port statusRJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connectionFiber Ports: 100BaseFX ports (SC/ST connector)

Optical Fiber

Power RequirementsPower Consumption:IM-4TX: 2.5W IM-2MSC/2TX: 5W

IM-2MST/2TX: 5W IM-2SSC/2TX: 5WIM-1LSC/3TX: 4WIM-4MSC: 7.2W IM-4MST: 7.2WIM-4SSC: 7.2W

Physical CharacteristicsCasing: IP30 protectionDimensions (W x H x D): 40 x 127.8 x 100 mm (1.57 x 5.03 x 3.94 in.)Weight (Gross Weight): IM-4TX: 215 gIM-2MSC/2TX: 245 gIM-2MST/2TX: 250 gIM-2SSC/2TX: 245 gIM-1LSC/3TX: 235 gIM-4MSC: 250 g IM-4MST: 270 g IM-4SSC: 270 g

MTBF620,000 hrs Database: MIL-HDBK-217F, GB 25˚C

IM Series

Specifications

Gigabit Ethernet Interface Modules, IM-2G Series

Fast Ethernet Interface Modules, IM Series

IM-2GTX IM-2GSFP

IM-4TX IM-4MSCIM-4SSC

IM-2MST/2TX IM-1LSC/3TXIM-2MSC/2TXIM-2SSC/2TX

IM-4MST

100BaseFX

Multi Mode Single Mode Single Mode, 80 km

Wavelength 1300 nm 1310 nm 1550 nmMax. TX -10 dBm 0 dBm 0 dBm

Min. TX -20 dBm -5 dBm -5 dBm

RX Sensitivity -32 dBm -34 dBm -34 dBm

Link Budget 12 dB 29 dB 29 dB

Typical Distance 5 km a

4 km b 40 km c 80 km d

Saturation -6 dBm -3 dBm -3 dBm

a. 50/125 μm, 800 MHz*km fiber optic cableb. 62.5/125 μm, 500 MHz*km fiber optic cablec. 9/125 μm, 3.5 PS/(nm*km) fiber optic cabled. 9/125 μm, 19 PS/(nm*km) fiber optic cable

IM Series



1

Modular M



IM Series


Gigabit Ethernet Interface Modules Fast Ethernet Interface Modules

Side View Rear ViewFront View Front View Side View

Product Model

Port Interface

Gigabit Ethernet Fast Ethernet

10/100/1000BaseT(X) 1000BaseSFP* 10/100BaseT(X)

100BaseFX

Multi Mode,SC Connector

Multi Mode,ST Connector

Single Mode,SC Connector

Single Mode,SC Connector,

80 km

IM-2G Series

IM-2GTX 2

IM-2GSFP 2

IM Series

IM-4TX 4

IM-4MSC 4

IM-4MST 4

IM-2MSC/2TX 2 2

IM-2MST/2TX 2 2

IM-4SSC 4

IM-2SSC/2TX 2 2

IM-1LSC/3TX 3 1

* IM-2GSFP supports 2 1000BaseSFP slots. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.


EDS-G509 9G-port full Gigabit managed Ethernet switch 2-8

EDS-518A 16+2G-port Gigabit managed Ethernet switch 2-10

EDS-510A 7+3G-port Gigabit managed Ethernet switch 2-12

EDS-516A/508A/505A 16-, 8-, and 5-port managed Ethernet switches 2-14

EDS-408A/405A 8- and 5-port entry-level managed Ethernet switches 2-17

PX-1510 7+3G-port Gigabit PoE managed Ethernet switch 2-19

Moxa NMS Network management software 2-21

EDS-SNMP OPC Server Pro OPC server for connecting SNMP devices 2-22

SFP-1G Series 1G-port Gigabit Ethernet SFP modules 2-23


Managed Ethernet Switches

2Managed Ethernet Switches


2

Managed Ethernet Sw

itches


Wide Selection of Managed Ethernet SwitchesVariety of Topologies for Flexible Network Planning

Gigabit Turbo Ring

Turbo RingRecovery Time < 20 ms

StorageServer

IP Surveillance Software

Moxa NMSNetwork Management Software

Web-based Access

OPC Server & Client

EDS-728

EDS-405A

EDS-405A

Dual-Homing

Gigabit Fiber Optic Cable (1000BaseSX/LX/LHX/ZX)Fiber Optic Cable (100BaseFX)Twisted Pair Cable (10/100BaseT(X) or 10/100/1000BaseT(X))Power-over-Ethernet

Gigabit Turbo Ring

PX-1510 Gigabit PoE Managed Ethernet Switch

EDS-510AGigabit Managed Ethernet Switch

EDS-G509Full Gigabit Managed

Ethernet Switch

Up to 6 Gigabit servers

EDS-408AEntry-level Managed Ethernet Switch

EDS-516AManaged Ethernet

Switch

Wireless Access Point

IP PhoneIP Camera

Turbo Ring

EDS-518AGigabit Managed Ethernet Switch

EDS-508A

EDS-505AManaged Ethernet Switch

Dual-Ring

Turbo Ring

Solution Tutorial

Ring Coupling


2

Managed

Ethernet Switches

0Overview

1

Modular

EthernetSwitches

3

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

4

Managed Ethernet Switches

Ethernet is becoming the default data communication medium for industrial automation applications. In fact, it’s not uncommon for video, voice, and high-rate industrial application data transfers to be integrated into one network. Moxa’s EDS-G509/518A/510A and PX-1510, which come equipped with a redundant Gigabit Ethernet protocol called Gigabit Turbo Ring, gives system maintainers a convenient means of setting up a versatile yet stable Gigabit Ethernet network. With Gigabit Turbo Ring, if any segment of the network is disconnected, your automation system will be back to normal in few milliseconds.

Moxa provides a complete range of solutions for IEEE 802.3af PoE compliant units and Ethernet-enabled devices. The Gigabit PoE managed Ethernet switch, PX-1510, can be used not only to simplify wiring in the field, but also to provide advanced network control and management. In addition, the devices can be placed up to 328 feet (100 m) from a PSE.

Gigabit Ethernet Redundant Ring

Coupling Several Turbo Rings for Distributed Applications

Gigabit Turbo Ring

Ring A

Ring B

Ring Master

Ring Master

Ring Master

Dual-RingDual-Homing

Ring Coupling

Backup Path

Primary Path

Ring Master

Ring Master

Ring A

Ring B

Ring A

Ring B

Ring Master

For some systems, it may not be convenient to connect all devices in the system to create one BIG redundant ring, since some devices could be located at a remote site. Turbo Ring's "Ring Coupling" function helps you separate those distributed devices into different smaller redundant rings, without any control line, but in such a way that the smaller rings will still be able to communicate with each other.

The advanced coupling technology allows you to diversify the connection to Turbo Ring and fit various installation environments. You can configure the network for “Dual-Homing,” which involves coupling two separate rings with a single EDS Ethernet switch connecting to two independent connection points. The back-up path will be activated if the operating connection (primary path) fails, and the “Dual-Ring” function adds reliability by allowing a single EDS Ethernet switch to connect two separate rings for applications that present cabling difficulties.

Versatile Redundant Turbo Ring Topology for Flexible Network Planning

Power-over-Ethernet Solution for Simple and Flexible Connections

Ring Master

Ethernet PowerPower-over-Ethernet

DR-120-48

PX-1510 PoE Ethernet Switch

SPL-24

Non-PoE Device

24 VDC outputData on

Ethernet

48 VDC input

PoE Spliter

AWK-1100Wireless Access Point

Solution Tutorial

Backup Path

Primary Path


2

Managed Ethernet Sw

itches


The EDS-G509, EDS-500A, and PX-1510 series supports IEEE 802.1X (Port-based Network Access Control) to restrict port access to authorized users only. Authentication is done using the local user database or an external RADIUS (Remote Authentication Dial In User Service) server.

The EDS-G509, EDS-500A, and PX-1510 series Ethernet switches support IEEE 802.1D-1998 GMRP (GARP Multicast Registration Protocol) and IGMP snooping, which provide the ability to prune multicast traffic so that it travels only to those end destinations that require this kind of traffic. The overall effect is to reduce the amount of traffic on the Ethernet LAN.

IEEE 802.1X Enhances User Authentication

IGMP Snooping and GMRP for Filtering Multicast Traffic

RMON (Remote Network Monitoring) is an Internet Engineering Task Force (IETF) standard monitoring specification that allows various network agents and console systems to exchange network monitoring data. RMON provides you with comprehensive network fault diagnosis, planning, and

performance-tuning information, and helps you manage your network in a more proactive manner. If configured correctly, RMON probes deliver information before problems occur. This means that you can take action before the problems affect users.

RMON for Efficient Network Monitoring and Proactive Capability

Device without IEEE 802.1X authorization

Device with IEEE 802.1X authorization

RADIUS

Group 1 Multicast Stream Group 2 Multicast Stream

IGMP Group 2 IGMP Group 2IGMP Group 1 IGMP Group 1

IEEE 802.3ad (LACP, Link Aggregation Control Protocol) provides flexible network connections and a redundant path for critical devices. For example, the EDS-G509 and EDS-500A allow users to set up a wider communication path by aggregating a trunk group. A maximum of eight ports can be assigned to one trunk group to optimize your network connection and redundant paths. When selected ports are grouped for trunking, LACP will exchange information to determine whether or not the ports selected in a group can be trunked together.

Port Trunking for Flexible Network Connections

Up to 8 ports can be assigned to one trunk group

Solution Tutorial

Advanced Network Control and Management

HTTPS/SSH

In order to protect data from being intercepted, the EDS-G509, EDS-500A, and PX-1510 series support the HTTPS and SSH protocols for transferring data over the Internet in an encrypted form. If you are changing the configuration of an Ethernet switch online, please make sure that it is done over HTTPS and SSH so that the data remains secure.

HTTPS and SSH Enhance Network Security


2

Managed

Ethernet Switches

0Overview

1

Modular

EthernetSwitches

3

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

4

Managed Ethernet Switches Solution Tutorial

A VLAN is a group of devices that can be located anywhere on a network, but which communicate as if they are on the same physical segment. VLANs can be used to segment your network without being restricted by physical connections—a limitation imposed by traditional network design. Besides, since all automation systems incorporate sensitive devices that must be protected from unauthorized access, it is very important to have some type of authentication system set up that only allows authorized users to access the system. If devices belong to different VLANs, they cannot communicate with each other, providing extra security and protection from unwanted invasion or traffic. The IEEE 802.1Q standard and GVRP protocol can exchange the same interoperable parameters to keep consistent VLAN settings over the entire network.

VLAN Eases Network Planning

Quality of Service (QoS) provides a traffic prioritization capability to ensure that important data is delievered consistently and predictably. Moxa’s managed Ethernet switches can inspect IEEE 802.1p/1Q layer 2 CoS tags, and even layer 3 TOS information, to provide a consistent classification of the entire network. The QoS capability of the managed Ethernet switches improve your industrial network’s performance and determinism for mission-critical applications.

QoS Increases Determinism

Low Priority

Collected Data

Top Priority

High Priority

Control Message

Management Message

VLAN1VLAN2

VLAN3

Department 1 Department 2 Department 3

Unlimited bandwidth should not be given to any single device on a network, particularly in light of what could happen if the device malfunctions. The most well-known problem is the broadcast storms caused by setting up the wrong topology, or by devices that malfunction. Moxa’s managed Ethernet switches series not only prevent broadcast storms, but in addition the ingress/egress rate of unicast/multicast/broadcast packets can also be configured to give administrators full control of limited bandwidth to prevent unpredictable faults.

Bandwidth Management Prevents Unpredictable Network Status

Traffic filtered or dropped inside Moxa’s managed Ethernet switches

Normal Traffic

Overloaded Traffic

FailedNetwork Device

The EDS-G509, EDS-500A, and PX-1510 Ethernet switches can use the Port Lock function to assign protected static MAC addresses to specific ports. Locked ports will not be able to learn other addresses, but only allow traffic that comes from the preset static MAC address, helping block unwanted invasion and usage.

Port Lock Limits Accessed by MAC Address

Device without authorized MAC address

Device with authorized MAC address

Low Priority

Top Priority

High Priority

Normal Traffic Normal Traffic

Mirrored Traffic

In some cases, a network is so large that it is difficult to achieve the expected level of communications. Industrial communications applications use more of a command-response style than the file- transfer style used in office network environments. This means that when first setting up an industrial Ethernet network, control engineers may need to use a second port to monitor the actual activity between their devices and computer host. The mirroring port function on the Moxa’s managed Ethernet switches help ensure that the system behaves as expected.

Port Mirroring for Online Monitoring


2

Managed Ethernet Sw

itches


PLC

LAN

PLC

Switch Events Port Events

Cold Start Warm Start Link On

Power On/Off Authentication Failure Link Off

Topology Change Configuration Change Traffic Overload

Since industrial Ethernet devices are often located at remote parts of a network, it may be hard for system administrators to know the status of such devices. The traditional way of determining device status is to poll devices periodically, but this is not “real-time” enough for many modern applications, and also wastes precious computing resources. A more modern solution to this problem is to use industrial

Ethernet switches that provide system maintainers with real-time alarm messages almost instantaneously when exceptions occur. In other words, warning messages are triggered actively when the events occur. In order to handle these requirements, industrial Ethernet switches need features such as:

Automatic Warning by Event

Replacing Faulty Devices

Warning Notification

e-mail

To reduce the effort required to configure IP addresses, Moxa’s managed Ethernet switches are equipped with DHCP/BootP server and RARP protocol, which are used to set up IP addresses of Ethernet-enabled devices automatically.

In additions, the managed Ethernet switches can also play a role of DHCP relay agent (with Option 82 support) to forward the DHCP requests and provide information details (such as the slot ID, port number and VLAN ID) for the authentication of DHCP server.

Warning by e-mailMoxa’s managed Ethernet switches send out a warning e-mail when an exception is detected, providing system managers with real-time alarm

messages.

Warning by Relay OutputThe managed Ethernet switches provide relay outputs that can be configured to indicate the importance of events when notifying or warning engineers in the field. In response, engineers can respond quickly and with the appropriate emergency maintenance procedures to higher priority messages.

DI for Integrating Other Important SensorsThe EDS-G509, EDS-500A, and PX-1510 Ethernet switches have two digital inputs for integrating sensors into the Ethernet switches’ automatic alarm mechanism. This is done by redirecting warning messages to an IP network by e-mail notification.

Solution Tutorial

PLC

IP

DHCP request

IP

DHCP request

DHCP serverPLC

IP

New Device

e-mail


2

Managed

Ethernet Switches

0Overview

1

Modular

EthernetSwitches

3

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

4

Managed Ethernet Switches Solution Tutorial

Moxa’s managed Ethernet switches can be configured easily over the network by web browser, Telnet console, or a Windows utility provided by Moxa. In addition, it is simple to back up configuration parameters and update firmware in the managed Ethernet switches with these user-friendly tools.

Easy Browser-based Configuration

Model

EDS-G509 9 9 - - 2 2 √ √ √ √ √ √ √ √ √ √ √

EDS-518A 18 2 16 - 2 2 - √ √ √ √ √ √ √ √ √ √

EDS-516A 16 - 16 - 2 2 - √ √ √ √ √ √ √ √ √ √

EDS-510A 10 3 7 - 2 2 √ √ √ √ √ √ √ √ √ √ √

EDS-508A 8 - 8 - 2 2 √ √ √ √ √ √ √ √ √ √ √

EDS-505A 5 - 5 - 2 2 √ √ √ √ √ √ √ √ √ √ √

EDS-408A 8 - 8 - 1 - √ √ √ √ √ √ √

EDS-405A 5 - 5 - 1 - √ √ √ √ √ √ √

PX-1510 10 3 3 4 2 2 √ √ √ √ √ √ √ √ √ √ √

Tota

l Num

ber o

f Por

tsG

igab

it Et

hern

et(1

0/10

0/10

00 M

bps)

Fast

Eth

erne

t(1

0/10

0 M

bps)

PoE,

Fas

t Eth

erne

t(1

0/10

0 M

bps)

Digi

tal O

utpu

t

Digi

tal I

nput

DIP

Switc

h

Turb

o Ri

ng

RSTP

/STP

IGM

P sn

oopi

ng/G

MRP

Port

Trun

king

/LAC

P

IEEE

802.1

X/HT

TPS/

SSH

SNM

P/RM

ON

802.

1Q V

LAN

Port-

base

d VL

AN

QoS

ABC-

01*

Interface Features

ABC-01 Provides a Seamless Backup Solution

SAVE LOAD

Comparison Chart for Managed Ethernet Switches

The Moxa SNMP OPC Server Pro software package can convert SNMP into OPC format. The vertical integration of SNMP management information into existing OPC-based SCADA packages gives the customer the ability to establish an Ethernet network management application that is integrated with existing visualization and control applications.

Network Management with Moxa SNMP OPC Server Software

Moxa’s ABC-01 is designed to save and load the configuration of a Moxa EDS managed Ethernet switch. Simply plug the ABC-01 into the Ethernet switch’s RS-232 console port, and then use the Ethernet switch’s HMI utility to save or load the configuration. The ABC-01 makes it easy to manage your network, particularly when you need to back up or replace an Ethernet switch. You can quickly reinstall a substitute Ethernet switch (of the same model) or recover the entire system configuration if an Ethernet switch failure occurs.

ABC-01 ABC-01

*ABC-01 is an RS-232 RJ45-based automatic backup configurator for Moxa’s managed Ethernet switches. Please check page 11-1 for detailed information.


2

Managed Ethernet Sw

itches


EDS-G509 Series

IntroductionThe EDS-G509 is equipped with 9 Gigabit Ethernet ports and up to 5 fiber optic ports, making it ideal for upgrading an existing network to Gigabit speeds or building a new full Gigabit backbone. Gigabit transmission increases bandwidth for higher performance and transfers large amounts of video, voice, and data across a network quickly. The redundant Ethernet Turbo Ring and RSTP/STP (IEEE

802.1w/D) increase system reliability and the availability of your network backbone. The EDS-G509 series is designed especially for communication demanding applications, such as video and process monitoring, shipbuilding, ITS, and DCS systems, all of which can benefit from a scalable backbone construction.

4 10/100/1000BaseT(X) ports plus 5 combo (10/100/1000BaseT(X) ›or 100/1000BaseSFP slot) Gigabit portsFiber optic options for extending distance and electrical noise ›immunityTurbo Ring, RSTP/STP (IEEE 802.1w/D) for Ethernet redundancy ›QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON ›supportedIEEE 802.1X, HTTPS, and SSH enhance network security ›

EDS-G

509

Features and BenefitsTurbo Ring and RSTP/STP (IEEE 802.1w/D)•IGMP snooping and GMRP for filtering multicast traffic•Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network •planningQoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism•Port Trunking for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•

RMON for efficient network monitoring and proactive capability•Bandwidth management prevents unpredictable network status•Lock port function for blocking unauthorized access based on MAC •addressPort mirroring for online debugging•Automatic warning by exception through e-mail, relay output•Digital inputs to integrate sensors and alarms with IP networks•ABC-01 (Automatic Backup Configurator) for system configuration •backup

Specifications

TechnologyStandards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base FX, IEEE 802.3ab for 1000Base(X), IEEE 802.3z for 1000BaseSX/LX/LHX/ZX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control

9G-port full Gigabit managed Ethernet switch


InterfaceRJ45 Ports: 10/100/1000BaseT(X) auto negotiation speedFiber Ports: 100/1000BaseSFP slotConsole: RS-232 (RJ45)LED Indicators: PWR1, PWR2, FAULT, 10/100M/1000M, MASTER, COUPLERDIP Switch: Turbo Ring, Master, Coupler, ReserveAlarm Contact: Two relay outputs with current carrying capacity of 1A @ 24 VDCDigital Inputs: Two inputs with the same ground, but electrically isolated from the electronics.

+13 to +30V for state “1”•

Preliminary


2

Managed

Ethernet Switches

0Overview

1

Modular

EthernetSwitches

3

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

4Dimensions (unit = mm)


G509

8

9

8

9

Side View Front ViewDIN-Rail Kit Rear View Mounting Kit

-30 to +3V for state “0”•Max. input current: 8 mA•

Power RequirementsInput Voltage: 12/24/48 VDC (9.6 to 60 VDC), 24 VAC (18 to 30 VAC), redundant dual inputsConnection: Two removable 6-pin terminal blocksOverload Current Protection: PresentReverse Polarity Protection: Present

Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in.)Installation: DIN-Rail mounting, wall mounting (optional kit)

Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F) -40 to 75°C (-40 to 167°F) for T modelsStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)

Regulatory ApprovalsSafety: UL508 (Pending), EN60950-1 (Pending)Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending)Maritime: DNV (Pending), GL (Pending)EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 2 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6*Please check Moxa’s website for the most up-to-date certification status.


Optional AccessoriesABC-01: • Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manualDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U:• 4U-high, 19” rack mounting kit

EDS-G509: • Industrial full Gigabit managed Ethernet switch with 4 10/100/1000BaseT(X) ports, and 5 10/100/1000BaseT(X) or 100/1000BaseSFP slot combo ports, 0 to 60˚CEDS-G509-T: • Industrial full Gigabit managed Ethernet switch with 4 10/100/1000BaseT(X) ports, and 5 10/100/1000BaseT(X) or 100/1000BaseSFP slot combo ports, -40 to 75˚C

* EDS-G509 series supports up to 5 100/1000BaseSFP slots. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.

Managed Ethernet Switches EDS-G509


2

Managed Ethernet Sw

itches


EDS-518A Series

IntroductionThe EDS-518A is a standalone 18-port managed Ethernet switch that provides 2 combo Gigabit ports with built-in RJ45 or SFP slots for Gigabit optic communication. The Ethernet redundant Turbo Ring (recovery time < 20 ms) increases the reliability and speed of your

network backbone. The EDS-518A also supports intelligent network management functions, including QoS, IGMP snooping/GMRP, VLAN, Port Trunking, SNMPv1/v2c/v3, IEEE 802.1X, HTTPS, and SSH.

2 Gigabit plus 16 fast Ethernet ports for copper and fiber ›Turbo Ring (recovery time < 20 ms), RSTP/STP (IEEE 802.1w/D) ›for Ethernet redundancyQoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, ›RMON supportedIEEE 802.1X, HTTPS, and SSH › enhance network securityABC-01 (Automatic Backup Configurator) for system configuration ›backup

TechnologyStandards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base FX, IEEE 802.3ab for 1000BaseT(X), IEEE 802.3z for 1000BaseSX/LX/LHX/ZX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control Interface

Switch Properties Priority Queues: 4Max. Number of Available VLANs: 64VLAN ID Range: VID 1 to 4094IGMP Groups: 256

InterfaceRJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speedFiber Ports: 100BaseFX (SC/ST connector), and 1000BaseSFP slotConsole: RS-232 (RJ45)

SpecificationsLED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 100M (Fiber port), MASTER, COUPLERAlarm Contact: Two relay outputs with current carrying capacity of 1A @ 24 VDCDigital Inputs: Two inputs with the same ground, but electrically isolated from the electronics.

+13 to +30V for state “1”•-30 to +3V for state “0”•Max. input current: 8 mA•

Optical Fiber

EDS-518A

Features and BenefitsTurbo Ring (recovery time < 20 ms at full load) and RSTP/STP •(IEEE 802.1w/D)IGMP snooping and GMRP for filtering multicast traffic•Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network •planningQoS-IEEE 802.1p and TOS/DiffServ to increase determinism•Port Trunking for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•

SNMPv1/v2c/v3 for different levels of network management•RMON for efficient network monitoring and proactive capability•Bandwidth management prevents unpredictable network status•ABC-01 (Automatic Backup Configurator) for system configuration backup•Port mirroring for online debugging•Automatic warning by exception through e-mail, relay output•Digital inputs to integrate sensors and alarms with IP networks•DIN-Rail or panel mounting capability•

100BaseFX

Multi Mode Single ModeSingle Mode,

80 kmWavelength 1300 nm 1310 nm 1550 nmMax. TX -10 dBm 0 dBm 0 dBm










2

Managed

Ethernet Switches

0Overview

1

Modular

EthernetSwitches

3

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

4Dimensions (unit = mm)

142.7 94


Product ModelPort Interface


Standard Temperature (0 to 60˚C)

Extended Temperature(-40 to 75˚C)

Combo Port, 10/100/1000BaseT(X)

or 1000BaseSFP*10/100BaseT(X)

100BaseFX

Multi Mode, SC Connector

Multi Mode, ST Connector

Single Mode, SC Connector

Single Mode, SC Connector,

80 km

EDS-518A EDS-518A-T 2 16

EDS-518A-MM-SC EDS-518A-MM-SC-T 2 14 2

EDS-518A-MM-ST EDS-518A-MM-ST-T 2 14 2

EDS-518A-SS-SC EDS-518A-SS-SC-T 2 14 2

EDS-518A-SS-SC-80 2 14 2

* EDS-518A series supports 2 1000BaseSFP slots. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.


Power RequirementsInput Voltage: 24 VDC (12 to 45 VDC), redundant dual inputsInput Current (@ 24 V): 0.51A (EDS-518A), 0.61A (EDS-518A-MM, EDS-518A-SS)Connection: Two removable 6-pin terminal blocksOverload Current Protection: PresentReverse Polarity Protection: Present

Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 94 x 135 x 142.7 mm (3.7 x 5.31 x 5.62 in.) Weight: 1630 gInstallation: DIN-Rail mounting, wall mounting (optional kit)


Regulatory ApprovalsSafety: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1

Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending) Maritime: DNV, GL EMI: FCC Part 15, CISPR (EN55022) class A

EMS: EN61000-4-2 (ESD), level 2 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 2 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 EN61000-4-12Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 240,000 hrs Database: Telcordia (Bellcore), GB*Please check Moxa’s website for the most up-to-date certification status.


Optional AccessoriesABC-01:• Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manual DR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U: • 4U-high 19” rack mounting kit

Managed Ethernet Switches EDS-518A


2

Managed Ethernet Sw

itches


EDS-510A Series

Introduction

The EDS-510A Gigabit managed redundant Ethernet switch is equipped with up to 3 Gigabit Ethernet ports, making it ideal for building a Gigabit Turbo Ring, but leaving a spare Gigabit port for uplink use. The Ethernet redundant Turbo Ring (recovery time < 20 ms) and RSTP/STP (IEEE 802.1w/D) can increase system reliability

and the availability of your network backbone. The EDS-510A series is designed especially for communication demanding applications such as process control, shipbuilding, ITS, and DCS systems, which can benefit from a scalable backbone construction.

2 Gigabit Ethernet ports for redundant ring and 1 Gigabit Ethernet ›port for uplink solutionTurbo Ring (recovery time < 20 ms), RSTP/STP (IEEE 802.1w/D) ›for Ethernet redundancyQoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON ›supportedIEEE 802.1X, HTTPS, and SSH › enhance network securityABC-01 (Automatic Backup Configurator) for system configuration ›backup

EDS-510A

Features and BenefitsTurbo Ring (recovery time < 20 ms at full load) and RSTP/STP •(IEEE 802.1w/D)IGMP snooping and GMRP for filtering multicast traffic•Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network •planningQoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism•Port Trunking for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•

RMON for efficient network monitoring and proactive capability•Bandwidth management prevents unpredictable network status•Lock port function for blocking unauthorized access based on MAC •addressPort mirroring for online debugging•Automatic warning by exception through e-mail, relay output•Digital inputs to integrate sensors and alarms with IP networks•

SpecificationsTechnologyStandards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base FX, IEEE 802.3ab for 1000Base(X), IEEE 802.3z for 1000BaseSX/LX/LHX/ZX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control



InterfaceRJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speedFiber Ports: 1000BaseSFP slotConsole: RS-232 (RJ45)LED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 1000M (Gigabit port), MASTER, COUPLERDIP Switch: Turbo Ring, Master, Coupler, ReserveAlarm Contact: Two relay outputs with current carrying capacity of 1A @ 24 VDCDigital Inputs: Two inputs with the same ground, but electrically isolated from the electronics.


2

Managed

Ethernet Switches

0Overview

1

Modular

EthernetSwitches

3

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

4





Power RequirementsInput Voltage: 24 VDC (12 to 45 VDC), redundant dual inputsInput Current (@ 24 V): 0.65A (EDS-510A-3GT)

0.44A (EDS-510A-1GT2SFP) 0.46A (EDS-510A-3SFP)

Connection: Two removable 6-pin terminal blocksOverload Current Protection: PresentReverse Polarity Protection: Present

Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in.)Weight: 1170 gInstallation: DIN-Rail mounting, wall mounting (optional kit)


Regulatory ApprovalsSafety: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D;ATEX Class I, Zone 2, Ex nC IIC (Pending)Maritime: DNV, GLEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 2 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 204,000 hrs Database: MIL-HDBK-217F, GB 25˚C *Please check Moxa’s website for the most up-to-date certification status.






10/100/1000BaseT(X) 1000BaseSFP* 10/100BaseT(X)

EDS-510A-3GT EDS-510A-3GT-T 3 7EDS-510A-1GT2SFP EDS-510A-1GT2SFP-T 1 2 7EDS-510A-3SFP EDS-510A-3SFP-T 3 7


* EDS-510A series supports up to 3 1000BaseSFP slots. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.

Managed Ethernet Switches EDS-510A


2

Managed Ethernet Sw

itches


IntroductionEDS-516A/508A/505A are standalone 16, 8, and 5-port managed Ethernet switches. With its advanced Turbo Ring (recovery time < 20 ms) technology and RSTP/STP (IEEE 802.1w/D), the EDS-516A/508A/505A switches increase the reliability and availability of your industrial Ethernet network. Models with an extended operating temperature range of -40 to 75°C are also available. In addition,

the switches support several reliable and intelligent functions, including QoS, IGMP snooping/GMRP, VLAN, Port Trunking, SNMPv1/v2c/v3, IEEE 802.1X, HTTPS, SSH, and RMON, making the EDS-516A/508A/505A switches suitable for any harsh industrial environment.

EDS-516A/508A/505A Series

Plug-n-play Turbo Ring (recovery time < 20 ms), RSTP/STP ›(IEEE 802.1w/D) for Ethernet redundancyQoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON ›supportedCustomer configured e-mail notification by exception ›User-friendly web-based configuration and management ›-40 to 75˚C operating temperature (T models) ›ABC-01 (Automatic Backup Configurator) for system configuration ›backup

EDS-516A/508A/505A

Features and BenefitsTurbo Ring (recovery time < 20 ms at full load) and RSTP/STP •(IEEE 802.1w/D)IGMP snooping and GMRP for filtering multicast traffic•Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network •planningQoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism•Port Trunking for optimum bandwidth utilization•RMON for efficient network monitoring and proactive capability•

SNMPv1/v2c/v3 for different levels of network management security•IEEE 802.1X, HTTPS, and SSH to enhance network security•Bandwidth management prevents unpredictable network status•Lock port function for blocking unauthorized access based on MAC •addressPort mirroring for online debugging•Automatic warning by exception through e-mail, relay output•Digital inputs to integrate sensors and alarms with IP networks•

TechnologyStandards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base FX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMPv1/v2 device, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, GMRP, LACP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog

MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON Group 1, 2, 3, 9

Flow Control: IEEE 802.3x flow control, back pressure flow control

Switch PropertiesPriority Queues: 4

Specifications

Max. Number of Available VLANs: 64

VLAN ID Range: VID 1 to 4094

IGMP Groups: 256

InterfaceRJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection

Fiber Ports: 100BaseFX ports (SC/ST connector)

Console: RS-232 (RJ45)

LED Indicators: PWR1, PWR2, FAULT, MASTER, COUPLER, 10/100M

DIP Switch: Turbo Ring, Master, Coupler, Reserve (508A and 505A only)

Alarm Contact: Two relay outputs with current carrying capacity of 1A @ 24 VDC

Digital Input: Two inputs with the same ground, but electrically isolated from the electronics.


16-, 8-, and 5-port managed Ethernet switches


2

Managed

Ethernet Switches

0Overview

1

Modular

EthernetSwitches

3

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

4


Optical Fiber

* Single mode for EDS-508A and EDS-505A only.

Power RequirementsInput Voltage: 24 VDC (12 to 45 VDC), redundant dual inputs

Input Current (@ 24 V): 0.44A (EDS-516A), 0.51A (EDS-516A-MM), 0.26A/0.24A (EDS-508A/505A), 0.36A/0.35A (EDS-508A/505A-MM, EDS-508A/505A-SS)

Connection: Two removable 6-pin terminal blocks

Overload Current Protection: Present

Reverse Polarity Protection: Present

Physical CharacteristicsCasing: IP30 protection, metal case

Dimensions (W x H x D):

EDS-516A series: 94 x 135 x 142.7 mm (3.7 x 5.31 x 5.62 in.)

EDS-508A/505A series: 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in.)

Weight:

EDS-516A series: 1586 g

EDS-508A/505A series: 1040 g

Installation: DIN-Rail mounting, wall mounting (optional kit)

142.7 94


[ EDS-516A series ]

100BaseFX










Managed Ethernet Switches EDS-516A/508A/505A

Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F) -40 to 75°C (-40 to 167°F) for T models



Regulatory ApprovalsSafety: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1

Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (EDS-516A Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending)

Maritime: DNV, GL


EMS: EN61000-4-2 (ESD), level 3 (EDS-508A/505A) / level 2 (EDS-516A)EN61000-4-3 (RS), level 3EN61000-4-4 (EFT), level 3 (EDS-508A/505A) / level 2 (EDS-516A)EN61000-4-5 (Surge), level 3EN61000-4-6 (CS), level 3EN61000-4-8 EN61000-4-11

Shock: IEC 60068-2-27



MTBF: EDS-516A series: 247,000 hrs

EDS-508A series: 339,000 hrs

EDS-505A series: 352,000 hrs

Database: Telcordia (Bellcore), GB*Please check Moxa’s website for the most up-to-date certification status.



2

Managed Ethernet Sw

itches





EDS-516A/508A/505A

Product Model Port Interface



10/100BaseT(X)

100BaseFX




Single Mode, SC Connector,

80 km

EDS-516A Series

EDS-516A EDS-516A 16

EDS-516A-MM-SC EDS-516A-MM-SC-T 14 2

EDS-516A-MM-ST EDS-516A-MM-ST-T 14 2

EDS-508A/505A Series

EDS-508A/505A EDS-508A/505A-T 8/5

EDS-508A/505A-MM-SC EDS-508A/505A-MM-SC-T 6/3 2

EDS-508A/505A-MM-ST EDS-508A/505A-MM-ST-T 6/3 2

EDS-508A/505A-SS-SC EDS-508A/505A-SS-SC-T 6/3 2

EDS-508A/505A-SS-SC-80* EDS-508A-SS-SC-80-T 6/3 2

* EDS-505A-SS-SC-80 only supports a standard temperature model.


[ EDS-508A/505A series ]


2

Managed

Ethernet Switches

0Overview

1

Modular

EthernetSwitches

3

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

4


Features and BenefitsPlug-n-Play Turbo Ring (recovery time < 20 ms at full load) and •RSTP/STP (IEEE 802.1w/D) capabilityPort-based VLAN to ease network planning•QoS-IEEE 802.1p and TOS/DiffServ to increase determinism•RMON for efficient network monitoring and proactive capability•

Introduction

The EDS-408A/405A series Ethernet switches are entry-level 8 and 5-port managed Ethernet switches designed especially for industrial applications. The Ethernet switches support a variety of useful management functions, such as Turbo Ring, ring coupling, port-based VLAN, QoS, RMON, bandwidth management, port mirroring, and

warning by email or relay. The ready-to-use Turbo Ring can be set up easily using the web-based management interface, or with the DIP switches on the Ethernet switch’s top panel.


IEEE 802.3u for 100BaseT(X) and 100Base FX,IEEE 802.3x for Flow Control,IEEE 802.1D for Spanning Tree Protocol,IEEE 802.1w for Rapid STP,IEEE 802.1p for Class of Service

Protocols: SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, Telnet, SyslogMIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control

InterfaceRJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connectionFiber Ports: 100BaseFX ports (SC/ST connector) Console: RS-232 (RJ45)LED Indicators: PWR1, PWR2, FAULT, MASTER, COUPLER, 10/100MDIP Switch: Turbo Ring, Master, Coupler, ReserveAlarm Contact: One relay output with current carrying capacity of 1A @ 24 VDC

Optical Fiber

Power RequirementsInput Voltage: 24 VDC (12 to 45 VDC), redundant dual inputsInput Current (@ 24 V): 0.26A/0.24A (EDS-408A/405A), 0.35A/0.32A (EDS-408A/405A-MM, -SS)Connection: One removable 6-pin terminal blockOverload Current Protection: PresentReverse Polarity Protection: Present

Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 53.6 x 135 x 105 mm (3.17 x 5.31 x 4.13 in.)

Specifications

Plug-n-Play Turbo Ring with fast recovery time within 20 ms ›QoS, port-based VLAN, SNMPv1/v2c/v3, RMON supported ›Automatic warning by exception through e-mail, relay output ›User-friendly web-based configuration and management ›ABC-01 (Automatic Backup Configurator) for system configuration ›backup

SNMPv1/v2c/v3 for different levels of network management •securityBandwidth management prevents unpredictable network status•Port mirroring for online debugging•Automatic warning by exception through e-mail, relay output•

100BaseFX

Multi Mode Single Mode

Wavelength 1300 nm 1310 nmMax. TX -10 dBm 0 dBm

Min. TX -20 dBm -5 dBm

RX Sensitivity -32 dBm -34 dBm

Link Budget 12 dB 29 dB


4 km b 40 km c

Saturation -6 dBm -3 dBm

a. 50/125 μm, 800 MHz*km fiber optic cableb. 62.5/125 μm, 500 MHz*km fiber optic cablec. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable

8- and 5-port entry-level managed Ethernet switches

Managed Ethernet Switches EDS-408A/405A


2

Managed Ethernet Sw

itches





Weight: 650 gInstallation: DIN-Rail mounting, wall mounting (optional kit)


Regulatory ApprovalsSafety: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D; ATEX Class I, Zone 2, Ex nC IIC (Pending)Maritime: DNV, GLEMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD), level 3

EN61000-4-3 (RS), level 3 (EDS-405A) / level 2 (EDS-408A)

EN61000-4-4 (EFT), level 3 (EDS-405A) / level 2 (EDS-408A)EN61000-4-5 (Surge), level 3 (EDS-405A) / level 2 (EDS-408A)EN61000-4-6 (CS), level 3 (EDS-405A) / level 2 (EDS-408A)EN61000-4-8EN61000-4-11

Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: EDS-408A series: 363,000 hrs EDS-405A series: 392,000 hrs Database: Telcordia (Bellcore), GB*Please check Moxa’s website for the most up-to-date certification status.


EDS-408A/405A


Standard Temperature(0 to 60˚C)


10/100BaseT(X) 100BaseFX




EDS-408A/405A EDS-408A/405A-T 8/5

EDS-408A/405A-MM-SC EDS-408A/405A-MM-SC-T 6/3 2

EDS-408A/405A-MM-ST EDS-408A/405A-MM-ST-T 6/3 2

EDS-408A/405A-SS-SC EDS-408A/405A-SS-SC-T 6/3 2

Optional AccessoriesABC-01:• Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manualDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U: • 4U-high, 19” rack mounting kit


2

Managed

Ethernet Switches

0Overview

1

Modular

EthernetSwitches

3

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

4

PX-1510 Series

Introduction

The PX-1510 series Ethernet switches are Gigabit managed redundant Ethernet switches that come standard with 4 10/100BaseT(X) 802.3af (PoE) compliant Ethernet ports and 3 combo Gigabit Ethernet ports. The PX-1510 Ethernet switches provide up to 15.4 watts of power per PoE port, and allow power to be supplied to connected devices (such as surveillance cameras, wireless access points, and IP phones) when AC power is not readily available or cost-prohibitive to provide locally. The PX-1510 Ethernet switches are highly versatile, and their

SFP fiber port can transmit data up to 80 km from the device to the control center with high EMI immunity. The Ethernet switches support a variety of management functions, including Turbo Ring, RSTP/STP, IGMP, VLAN, QoS, RMON, bandwidth management, and port mirroring. The PX-1510 series is designed especially for security automation applications such as IP surveillance, and gate of entry systems, which can benefit from a scalable backbone construction and Power-over-Ethernet support.

4 IEEE 802.3af-compliant PoE and Ethernet combo ports ›Provides up to 15.4 watts at 48 VDC per PoE port ›Intelligent power consumption detection, classification, and PoE ›scheduling function 3 combo (10/100/1000BaseT(X) or 100/1000BaseSFP slot) Gigabit ›ports; 2 ports for redundant ring and 1 port for uplinkTurbo Ring (recovery time < 20 ms), RSTP/STP (IEEE 802.1w/D) ›for Ethernet redundancyQoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, ›RMON, IEEE 802.1X, HTTPS, and SSH supported

Features and BenefitsIEEE 802.3af Power-over-Ethernet Technology•Turbo Ring (recovery time < 20 ms at full load) and RSTP/STP (IEEE •802.1w/D)IGMP snooping and GMRP for filtering multicast traffic•Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network •planningQoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism•Port Trunking for optimum bandwidth utilization•

IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•RMON for efficient network monitoring and proactive capability•Bandwidth management prevents unpredictable network status•Lock port function for blocking unauthorized access based on MAC •addressPort mirroring for online debugging•Automatic warning by exception through e-mail, relay output•Digital inputs to integrate sensors and alarms with IP networks•

SpecificationsTechnologyStandards: IEEE 802.3af for Power-over-Ethernet, IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base FX, IEEE 802.3ab for 1000Base(X), IEEE 802.3z for 1000BaseSX/LX/LHX/ZX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, SyslogMIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control

7+3G-port Gigabit PoE managed Ethernet switch

Managed Ethernet Switches PX-1510


InterfaceRJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speedFiber Ports: 100/1000BaseSFP slotConsole: RS-232 (RJ45)LED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 1000M (Gigabit port), MASTER, COUPLER, PoEDIP Switch: Turbo Ring, Master, Coupler, ReserveAlarm Contact: Two relay outputs with current carrying capacity of 0.5A @ 48 VDCDigital Inputs: Two inputs with the same ground, but electrically isolated from the electronics.

Preliminary


2

Managed Ethernet Sw

itches




PX-1510

PoE

PowerXpan

d

10M100M 1000M

10 7

6

5

4

3

2

1

9

8

10

9

8



PoE (per port)Max. Output Power: 15.4WOutput Voltage: 44 to 48.5 VDCMax. Output Current: 350 mA Max. Overload Protection: 400 mA

Power RequirementsInput Voltage: 48 (46 to 50V) VDC, redundant dual inputsConnection: Two removable 6-pin terminal blocksOverload Current Protection: PresentReverse Polarity Protection: Present



Regulatory ApprovalsSafety: UL508 (Pending), EN60950-1 (Pending)Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending)Maritime: DNV (Pending), GL (Pending)Traffic Control: NEMA TS2 (Pending)EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 2 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6*Please check Moxa’s website for the most up-to-date certification status.






Combo Port,10/100/1000BaseT(X) or 100/1000BaseSFP*

PoE, 10/100BaseT(X) 10/100BaseT(X)

PX-1510-3GT PX-1510-3GT-T 3 4 3

Optional AccessoriesABC-01: • Industrial RS-232, RJ45-based, automatic backup configuratorSPL-24: • PoE splitter, maximum output of 12.95W at 24 VDC, 0 to 60˚CSPL-24-T: • PoE splitter, maximum output of 12.95W at 24 VDC, -40 to 75˚CEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manualDR-120-48:• 120W/2.5A DIN-Rail 48 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U:• 4U-high, 19” rack mounting kit

* PX-1510 series supports up to 3 100/1000BaseSFP slots. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.

PX-1510


2

Managed

Ethernet Switches

0Overview

1

Modular

EthernetSwitches

3

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

4

Network management software for monitoring industrial networks

Moxa NMS

Moxa NMS’s remote management capability provides an integrated environment for managing your industrial Ethernet infrastructure.

Introduction

Configuration ManagementMoxa NMS provides comprehensive, easy-to-use tools for network operators to configure Moxa’s managed Ethernet switches. You will find the configuration file management, firmware management, and topology recognition tools particularly useful. The user-friendly web UI, with firmware upgrade, auto-discovery topology, and more, makes it particularly easy to deploy your industrial Ethernet infrastructure.

Performance ManagementNetwork operators are able to monitor and analyze network traffic reports for each network device with Moxa NMS. Moxa NMS generates various trending graphs to monitor network performance, and with the full support of both standard and Moxa proprietary MIBs, Moxa NMS provides a complete data source for network performance analysis.

Fault ManagementFaults impair normal operation, and users expect to be kept informed of network status. Through Moxa NMS’s fault management system, an organized event list provides the operational status of the whole network. Color-coded icons on the topology map notify network operators the first time a network anomaly is detected.

•Auto-Discoverytocreatetopologymap

•Varioustrendinggraphstogenerateperformancereports

•Faultmanagementsystemtomonitornetworkanomalies

•Remotelyaccessiblethroughuser-friendlywebUI

Managed Ethernet Switches MoxaNMS

Features and Benefits

System RequirementsProcessor: x86 compatibleCPU, min. 1 GHz

RAM: 1 GB

Hard disk space: 500 MB free

Preliminary


2

Managed Ethernet Sw

itches


Introduction

•“BroadcastSearch”thenetworkforMoxa’smanagedEthernetswitches and any SNMP device

•Easytocreateandedittheconfigurationofconnecteddevicesinadvance

•EasytocreateandedittheMIBTemplatefordedicatedtagfileofanySNMP device

•User-definabletagfilemeetstherequirementsofmanydifferentapplications

EDS-SNMP OPC Server Pro

Windows NT/2000/XP, Administrator Privileges, Ethernet Card


Features and Benefits

System Requirements

EDS-SNMP OPC Server Pro: CD with EDS-SNMP OPC Server Pro software and manual

Seamlessly integrate EDS-SNMP OPC Server Pro with the leading

HMI/SCADA software to create a comprehensive Ethernet network

management solution for SNMP devices.

EDS-SN

MP O

PC Server Pro

Moxa’s EDS-SNMP OPC Server Pro provides a user-editable Tag file for any SNMP device. Use the default MIB file, or create and edit a standard or private MIB to generate a dedicated Tag file. This powerful function lets operators use an existing HMI software environment to create a customized and real time view of the integrity of all Ethernet network devices, the overall Ethernet network traffic volume, and overall Ethernet network status. Moxa’s managed Ethernet switches are ideally suited for connecting Ethernet-enabled industrial devices

in your mission critical applications. Combined with EDS-SNMP OPC Server Pro software, your HMI (Human Machine Interface) packages and SCADA (Supervisory Control And Data Acquisition) software will be turned into a complete remote network traffic and status monitoring tool. This solution gives control engineers the power to monitor the network from a central location with existing and familiar visualization and control applications.

OPC server for integrating SNMP devices into HMI/SCADA systems


2

Managed

Ethernet Switches

0Overview

1

Modular

EthernetSwitches

3

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

4


4555.5

56.6

6.25RXTX

13.3

5

8.458.2

0.6

0.4

13.4

8.40

1.68

13.7

14

14.6

0.4

Side View

Rear View

Top View

SFP-1G Series

InterfaceGigabit Port: 1 portConnector: Duplex LC Connector or Simplex LC Connector* (WDM-type only)* WDM-type SFP modules must be used in pairs (e.g., SFP-1GXXALC and SFP-

1GXXBLC)

Optical Fiber

Specifications

Compliant with IEEE 802.3z ›Differential LVPECL inputs and outputs ›Single power supply 3.3V ›TTL signal detect indicator ›Hot Pluggable ›Class 1 laser product, complies with EN60825-1 ›

EN : 60825

Gigabit Ethernet

SFP-SX SFP-LX SFP-LHX SFP-ZX

Wavelength 850 nm 1310 nm 1310 nm 1550 nmMax. TX -4 dBm -3 dBm 1 dBm 5 dBm

Min. TX -9.5 dBm -9.5 dBm -4 dBm 0 dBm

RX Sensitivity -18 dBm -20 dBm -24 dBm 24 dBm

Link Budget 8.5 dB 10.5 dB 20 dB 24 dB

Typical Distance 550 m a

275 m b1100 m c

550 m d

10 km e40 km e 80 km f

Saturation 0 dBm -3 dBm -3 dBm -3 dBm

Gigabit Ethernet

SFP-10A SFP-10B SFP-20A SFP-20B SFP-40A SFP-40B

Wave-length

TX 1310 nm,RX 1550 nm

TX 1550 nm,RX 1310 nm

TX 1310 nm,RX 1550 nm

TX 1550 nm,RX 1310 nm

TX 1310 nm,RX 1550 nm

TX 1550 nm,RX 1310 nm

Max. TX -3 dBm -2 dBm 2 dBm




Typical Distance 10 km ef 20 km ef 40 km ef


a. 50/125 μm, 400 MHz*km fiber optic cableb. 62.5/125 μm, 200 MHz*km fiber optic cablec. 50/125 μm, 800 MHz*km fiber optic cabled. 62.5/125 μm, 500 MHz*km fiber optic cablee. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable f. 9/125 μm, 19 PS/(nm*km) fiber optic cable


Regulatory ApprovalsSafety: UL, TÜV, EN60825-1

1G-port Gigabit Ethernet SFP modules

Managed Ethernet Switches SFP-1G


2

Managed Ethernet Sw

itches



WDM-type (BiDi) SFP ModulesProduct Model Port Interface



1000BaseSFP, LC Connector, 10 km

1000BaseSFP,LC Connector, 20 km

1000BaseSFP,LC Connector, 40 km

TX 1310 nm, RX 1550 nm

TX 1550 nm, RX 1310 nm

TX 1310 nm, RX 1550 nm

TX 1550 nm, RX 1310 nm

TX 1310 nm, RX 1550 nm

TX 1550 nm, RX 1310 nm

SFP-1G10ALC SFP-1G10ALC-T 1

SFP-1G10BLC SFP-1G10BLC-T 1





SFP ModulesProduct Model Port Interface



1000BaseSX,LC Connector,

0.5 km

1000BaseLX, LC Connector,

10 km

1000BaseLHX,LC Connector,

40 km

1000BaseZX,LC Connector,

80 km

SFP-1GSXLC SFP-1GSXLC-T* 1

SFP-1GLXLC SFP-1GLXLC-T 1

SFP-1GLHXLC SFP-1GLHXLC-T 1

SFP-1GZXLC SFP-1GZXLC-T 1

* SFP-1GSXLC-T: -20 to 75˚C operating temperature

SFP-1G

Matched ProductsEDS-828/728 series:• IM-2GSFP series Gigabit Ethernet interface moduleEDS-G509 series:• 9G-port full Gigabit managed Ethernet switchesEDS-518A series:• 16+2G-port Gigabit managed Ethernet switchesEDS-510A series:• 7+3G-port Gigabit managed Ethernet switchesPX-1510 series:• 7+3G-port Gigabit PoE managed Ethernet switchesPT and IKS • series: PM-7200-2G/4G series Gigabit Ethernet interface modulesEDS-G308 series: • 8G-port full Gigabit unmanaged Ethernet switchesIMC-101G series:• Industrial Gigabit media converters

Unmanaged Ethernet Switches


EDS-G308 8G-port full Gigabit unmanaged Ethernet switch 3-5

EDS-P308 8-port IEEE 802.3af PoE unmanaged Ethernet switch 3-7

EDS-305-M12 5-port M12/IP67 unmanaged Ethernet switch 3-10

EDS-316/309/308/305 16, 9, 8, and 5-port unmanaged Ethernet switches 3-12

EDS-208A/205A/208/205 8 and 5-port entry-level unmanaged Ethernet switches 3-15


3




3

Unmanaged Ethernet Sw

itches

Unmanaged Switches for Harsh Environments

Solution Tutorial

Adapted for Any Tough Environment

Gigabit Fiber Optic Cable (1000BaseSX/LX/LHX/ZX)Fiber Optic Cable (100BaseFX)Twisted Pair Cable (10/100BaseT(X) or 10/100/1000BaseT(X))Power over EthernetPower

EDS-316/309/308/305 Unmanaged

Ethernet Switch

EDS-305-M12 M12/IP67

Unmanaged Ethernet Switch

EDS-P308 PoE Unmanaged Ethernet Switch

EDS-208A/205A/208/205

Entry-level Unmanaged

Ethernet Switch

Entry-levelMedia

Converter

SPL-24PoE Splitter

IndustrialMedia

Converter

Industrial Media Converter

Industrial Media Converter

Industrial GigabitMedia Converter

Server

PoE Device Non PoE DeviceDNVGL

UL508UL/cUL60950-1

48 VDC Power Supply

EDS-G308 Full Gigabit Unmanaged Ethernet Switch

EDS-316/309/308/305

Gigabit ManagedEthernet Switch

EDS-316/309/308/305


3

Unmanaged

Ethernet Switches

0Overview

5

4

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation


Industrial environments often involve unknown, hazardous factors that can influence the operation of Ethernet devices. In fact, some of the factors could cause serious disasters or the loss of life and property.

Many of Moxa’s industrial products have received UL508 and UL60950-1 certifications, which were developed to indicate which industrial control and information technology equipment is suitable

for hazardous locations such as maritime environments, mines, oil refineries, and other industrial settings. In addition, UL/cUL Class 1 Division 2, ATEX IIG3 C1Z2, and DNV and GL maritime type approvals have strict standards for testing and determining which devices can be used safely and reliably in these critical environments.

Certified to Meet Industrial Reliability Standards

Special Offerings of M12, IP67, and Power-over-Ethernet Ethernet Switches

Advanced Features for Enhanced Reliability and Operation

M12/IP67 Solution

The EDS-305-M12 is rated to provide IP67-level protection, which means that the Ethernet switch will not be affected by tiny dust particles, dirt, water, humidity, or vibration in most industrial

environments. In addition, the EDS-305-M12 is designed to operate reliably in a temperature range of -40 to 75˚C.

Some industries have special demands, such as tight and robust Ethernet connections or providing power to inaccessible locations.

Moxa offers EDS-305-M12 series to ensure stable connection and EDS-P308 series to fit security and remote applications.

Power-over-Ethernet Solution

Redundant Power Inputs

The EDS-G308/P308/316/309/308/305/200A series of unmanaged Ethernet switches provide two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to provide the Ethernet switch’s power needs automatically.

Ethernet PowerPower over Ethernet

Back-up Power Supply

PWR2

PWR1

DIN-Rail +24/48 VDC Power Supply

Relay Output Alarm for Port Breaks, Power Failure

The EDS-G308/P308/316/309/308/305 series of unmanaged Ethernet switches provide relay contact outputs to warn technicians on the shop floor when the power fails or a port link breaks, so that they can respond quickly with appropriate emergency operation procedures.

Warning Notification

EDS-P308PoE Ethernet Switch

SPL-24PoE Splitter

Non-PoE Device

24 VDC outputData on

Ethernet48 VDC Power Supply

Wireless Access PointMoxa provides a complete range of solutions for any IEEE 802.3af PoE compliant unit and Ethernet-enabled device. The EDS-P308 and SPL-24 (PoE Splitter) can be used to simplify wiring in the field, and provide a more versatile environment for installing devices. The devices can be placed up to 328 feet (100 m) from a PSE.

Solution TutorialUnmanaged Ethernet Switches



3


itches

Broadcast Storm Protection

Moxa’s unmanaged Ethernet switches are protected from receiving too many broadcast packets. During normal use, broadcast packets will be forwarded to all ports except the source port. However, unmanaged Ethernet switches will discard broadcast or multicast packets if the

number of those packets exceeds a threshold in a preset period of time. When the preset time period expires, the switch will then resume receiving broadcast or multicast packets until the threshold is reached again.

VLAN Tag Packets Transmitted Transparently

The IEEE 802.1Q standard defines a VLAN tag that includes TPID control (information) with an additional 4 bytes inserted into an untagged Ethernet frame. Moxa’s unmanaged Ethernet switches can

transmit and receive these data packets without modifying the packets in any way.

Solution Tutorial

Comparison Chart for Unmanaged Ethernet Switches

Model

EDS-G308 8 8 - - - √ √ √

EDS-P308 8 - 4 4 - √ √ √ √

EDS-305-M12 5 - - - 5 √

EDS-316 16 - 16 - - √ √ √ √ √ √

EDS-309 9 - 9 - - √ √ √ √ √ √ / √

EDS-308 8 - 8 - - √ √ √ √ √ √ / √

EDS-305 5 - 5 - - √ √ √ √ √ √ √

EDS-208A 8 - 8 - - √

EDS-205A 5 - 5 - - √

EDS-208 8 - 8 - - √ √

EDS-205 5 - 5 - - √

The EDS-G308, EDS-305-M12, and EDS-200A/200 unmanaged Ethernet switches allow users to use either a 24 VDC or 24 VAC power input. The 24 VAC power input is specially designed for applications in the building automation field where the power input source is often

restricted. The EDS-G308, EDS-305-M12 and EDS-200A/200 Ethernet switches are low-cost, versatile solutions suitable for all industrial applications.

DC or AC Power Input Options

Tota

l Num

ber o

f Por

tsGi

gabi

t Eth

erne

t (1

0/10

0/10

00 M

bps)

Fast

Eth

erne

t (1

0/10

0 M

bps)

PoE,

Fas

t Eth

erne

t (1

0/10

0 M

bps)

M12

/IP67

, Fas

t Eth

erne

t (1

0/10

0 M

bps)

Alar

m C

onta

ct

Pow

er R

edun

danc

y

-40

to 7

5˚C

UL/c

UL 6

0950

-1

UL50

8

EN50

155/

EN50

121-

4/EN

5012

1-3-

2

UL

/cUL

Cla

ss 1

, Div.

2/

ATEX

Cla

ss 1

, Zon

e 2

DNV/

GL

Available Pending *Please check Moxa’s website for the most up-to-date certification status.

Port Interface ApprovalsFeatures


3

Unmanaged

Ethernet Switches

0Overview

5

4

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation


8G-port full Gigabit unmanaged Ethernet switch

EDS-G308 Series

IntroductionThe EDS-G308 series is equipped with 8 Gigabit Ethernet ports and up to 2 fiber optic ports, making it ideal for applications that demand high bandwidth. The EDS-G308 series provides an economical solution for your industrial Gigabit Ethernet connection, and the built-in relay warning function alerts maintainers when power failures or port breaks occur. The EDS-G308 series includes 2 models: one with an operating temperature range of 0 to 60°C, and the other one with an extended

operating temperature range of -40 to 75°C. These 2 models pass through a 100% burn-in test to ensure that they fulfill the special needs of industrial automation control. The EDS-G308 series can be easily installed with DIN-Rail mounting as well as distribution boxes.

8 Gigabit Ethernet ports ›Fiber optic options for extending distance and electrical noise ›immunity Redundant dual 24 VDC power inputs ›Relay output warning for power failure and port break alarm ›Broadcast storm protection ›-40 to 75˚C operating temperature range (T models) ›


IEEE 802.3u for 100BaseT(X) and 100Base FX,IEEE 802.3ab for 1000Base(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,IEEE 802.3x for Flow Control

Processing Type: Store and Forward Flow Control: IEEE 802.3x flow control, back pressure flow control

InterfaceRJ45 Ports: 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connectionFiber Ports: 100/1000BaseSFP slotLED Indicators: PWR1, PWR2, FAULT, 10/100/1000MDIP Switch: Port break alarm maskAlarm Contact: One relay output with current carrying capacity of 1A @ 24 VDC

Power RequirementsInput Voltage: 12/24/48 VDC (9.6 to 60 VDC), 24 VDC (18 to 30 VAC) (47 to 63 Hz) redundant inputs Connection: Removable 6-pin terminal blockReverse Polarity Protection: Present


SpecificationsEnvironmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F), -40 to 75°C (-40 to 167°F) for T modelsStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)

Regulatory ApprovalsSafety: UL508 (Pending)Hazardous Location: UL/cUL Class 1, Division 2, Groups A, B, C and D (Pending); ATEX Class 1, Zone 2, Ex nC IIC (Pending)Maritime: DNV (Pending), GL (Pending)EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3Shock: IEC 60068-2-27Free Fall: IEC 60068-2-32Vibration: IEC 60068-2-6*Please check Moxa’s website for the most up-to-date certification status.


EDS-G308Unmanaged Ethernet Switches

Preliminary



3


itches


53.6

135

105

48.4

41.7

53.6 30.5

46.6

39.5

EDS-G308-2SFPEDS-G308

Mounting Kit Rear ViewFront ViewDIN-Rail KitSide View

EDS-G

308


Standard Temperature

(0 to 60˚C)

Extended Temperature

(-40 to 75˚C)

Gigabit Ethernet

10/100/1000BaseT(X)Combo port, 10/100/1000BaseT(X) or

100/1000BaseSFP*

EDS-G308 EDS-G308-T 8

EDS-G308-2SFP EDS-G308-2SFP-T 6 2

* EDS-G308-2SFP/EDS-G308-2SFP-T support up to 2 100/1000BaseSFP slots. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.


Optional AccessoriesDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U:• 4U-high 19” rack mounting kit


3

Unmanaged

Ethernet Switches

0Overview

5

4

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation


EDS-P308 Series

IntroductionThe EDS-P308 series switches are smart, 8-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. They are classified as power source equipment (PSE), and when used in this way, the EDS-P308 switches enable centralization of the power supply and provide up to 15.4 watts of power per port. The switches can be used to power IEEE 802.3af compliant powered devices (PD),

eliminating the need for additional wiring. The EDS-P308 switches support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing, and provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.

4 IEEE 802.3af compliant PoE and Ethernet combo ports ›Provides up to 15.4 watts at 48 VDC per PoE port ›Intelligent power consumption detection and classification ›Redundant dual VDC power inputs ›-40 to 75˚C operating temperature range (T models) ›


IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3x for Flow Control,IEEE 802.3af for Power-over-Ethernet

Processing Type: Store and ForwardFlow Control: IEEE 802.3x full duplex, back pressure flow control

InterfaceRJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connectionFiber Ports: 100BaseFX ports (SC connector)LED Indicators: PWR1, PWR2, Fault, 10/100M, PoEDIP Switch: Port break alarm maskAlarm Contact: One relay output with current carrying capacity of 0.5A @ 48 VDC

Optical Fiber

Specifications

100BaseFXMulti Mode Single Mode






4 km b 40 km c



8-port IEEE 802.3af PoE unmanaged Ethernet switch

EDS-P308Unmanaged Ethernet Switches

Power RequirementsInput Voltage: 48 (46 to 50V) VDC, redundant inputsInput Current (@ 48 V): 1.6AConnection: Removable 6-pin terminal blockOverload Current Protection: 2.5A (@ 48 VDC)Reverse Polarity Protection: Present

PoE (per port)Max. Output Power: 15.4WOutput Voltage: 44 to 48.5 VDCMax. Output Current: 350 mA Max. Overload Protection: 400 mA

Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 53.6 × 135 × 105 mm (2.11 x 5.31 x 4.13 in.)Weight: 840 gInstallation: DIN-Rail mounting, wall mounting (optional kit)

Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F) -40 to 75°C (-40 to 167°F) for T modelStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)

Regulatory ApprovalsSafety: UL508Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending) Maritime: DNV (Pending), GL (Pending)EMI: FCC Part 15, CISPR (EN55022) class A



3


itches


EDS-P308

Mounting Kit Rear ViewFront ViewDIN-Rail KitSide View Top and Bottom Views

TechnologyStandards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3af for Power-over-Ethernet

InterfaceRJ45 Ports: 10/100BaseT(X) for PoE IN and DATA OUTLED Indicators: Power

105 53.6 53.6 53.6

135

EMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11Shock: IEC 60068-2-27

Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 360,000 hrs



IEEE 802.3af PoE splitter

IEEE 802.3af compliant, splits power and data from PoE equipment ›Supports output power up to 12.95 W at 24 VDC ›Short circuit protection for power output ›Auto disconnection if power input voltage is too high ›-40 to 75°C operating temperature range (T models) ›DIN-Rail mounting ability ›

SPL-24 Series

SpecificationsPower RequirementsInput Voltage: 44 to 75 VDCOutput Voltage: 24 VDCOutput Power: 12.95W (0.54A @ 24 VDC)Connection: Removable 3-pin terminal block for outputOverload Current Protection: 400 mA (@ 48 VDC input)Efficiency: 85% (at 25°C, fully loaded)


3

Unmanaged

Ethernet Switches

0Overview

5

4

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation


EDS-P308Unmanaged Ethernet Switches

Ordering Information Product Model Port Interface



PoE, 10/100BaseT(X) 10/100BaseT(X)

100BaseFX

Mulit Mode,SC Connector


EDS-P308 EDS-P308-T 4 4

EDS-P308-M-SC EDS-P308-M-SC-T 4 3 1

EDS-P308-S-SC EDS-P308-S-SC-T 4 3 1

EDS-P308-MM-SC EDS-P308-MM-SC-T 4 2 2

EDS-P308-SS-SC EDS-P308-SS-SC-T 4 2 2


Side View Rear ViewFront ViewSide View Top and Bottom Views

Optional AccessoriesSPL-24: • PoE splitter, maximum output of 12.95W at 24 VDC, 0 to 60˚CSPL-24-T:• PoE splitter, maximum output of 12.95W at 24 VDC, -40 to 75˚CDR-75-48:• 75W/1.6A DIN-Rail 48 VDC power supply with universal 85 to 264 VAC inputDR-120-48: • 120W/2.5A DIN-Rail 48 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U: • 4U-high 19” rack mounting kit

Physical CharacteristicsCasing: IP30 protection, plastic caseDimensions (W x H x D): 24.87 × 100 × 74 mm (0.98 x 3.93 x 2.91 in.)Weight: 95 gInstallation: DIN-Rail mounting


Regulatory ApprovalsSafety: UL508 (Pending) Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending) EMI: FCC Part 15, CISPR (EN55022) class A

EMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 5,100,000 hrs Database: MIL-HDBK-217F, GB 25˚C *Please check Moxa’s website for the most up-to-date certification status.


DIN-Rail Kit



3


itches

5-port M12/IP67 unmanaged Ethernet switch

EDS-305-M12 Series

EDS-305-M

12

M12 connectors and IP67 rated case ›10/100BaseT(X), 4-pin M12 (D-coding), F/H duplex mode, and ›auto MDI/MDI-X connectionPower input: 12 to 45 VDC, 18 to 30 VAC ›-40 to 75˚C operating temperature range (T models) ›

TechnologyStandards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow ControlProcessing type: Store and Forward, with IEEE 802.3x full duplex, non-blocking flow control

InterfaceM12 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connectionLED Indicators: Power, LNK/ACT

Power RequirementsInput Voltage: 12 to 45 VDC, 18 to 30 VAC (47 to 63 Hz) Input Current (@ 24 V): 0.12A @ 24 VDC; 0.28A @ 24 VACConnection: one M12 socket (A-coding), single power inputOverload Current Protection, Limited Current: 1.1A Reverse Polarity Protection: Present

Physical CharacteristicsCasing: IP67 protection, plastic caseDimensions (W x H x D): 60 x 125 x 29.6 mm (2.36 x 4.92 x 1.17 in.)Weight: 250 gInstallation: Field-style mounting, DIN-Rail mounting (optional kit)

Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F), -40 to 75°C (-40 to 167°F) for T modelStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5% to 95% (non-condensing)

Specifications

Regulatory ApprovalsSafety: UL508 (Pending)Rail Traffic: EN50155 (Pending), EN50121-4 (Pending), EN50121-3-2 (Pending)Hazardous Location: UL/cUL Class I, Division 2, Groups A and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending)Maritime: DNV (Pending), GL (Pending) EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 2 EN61000-4-8 EN61000-4-11Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 636,000hrs



IntroductionThe EDS-305-M12 series Ethernet switches are IP67 rated for the toughest industrial applications. The EDS-305-M12’s rugged packaging and connectors guard against dust, water, and oil. The M12 connectors ensure tight and robust connections and protect your applications from disturbances, such as the vibration and

shock encountered in the transportation industry. In addition, these space-saving switches can be mounted virtually anywhere. Extended operating temperature models for -40 to 75°C operation are also available.


3

Unmanaged

Ethernet Switches

0Overview

5

4

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation


EDS-305-M12Unmanaged Ethernet Switches



Top View Side ViewFront View

EDS-305-M12:• Industrial M12/IP67 unmanaged Ethernet switch with 5 10/100BaseT(X) ports, 0 to 60°CEDS-305-M12-T:• Industrial M12/IP67 unmanaged Ethernet switch with 5 10/100BaseT(X) ports, -40 to 75°C

Optional AccessoriesDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchDK-M12-305:• DIN-Rail mounting kit for EDS-305-M12 seriesM12 Patch Cords and Sensor Connectors:•

M12 Patch Cords

CBL-M12D(MM4P)/RJ45-100 IP671-meter M12-to-RJ45 Cat-5E UTP Ethernet cable with waterproof 4-pin D-coded M12

connector

BL-M12(FF5P)/OPEN-100 IP67 1-meter M12-to-5-pin power cable with waterproof 5-pin A-coded M12 connector

Sensor Connectors

M12D-4P-IP68 Field-installable D-coded screw-in sensor connector, male

M12A-5P-IP68 Field-installable A-coded screw-in sensor connector, female

2521

29.6

60

125

EDS-305-M12



3


itches

16, 9, 8, and 5-port unmanaged Ethernet switches

EDS-316/309/308/305

EDS-316/309/308/305 Series

IntroductionThe EDS-316/309/308/305 are 16, 9, 8, and 5-port Ethernet switches that provide an economical solution for your industrial Ethernet connections. The built-in relay warning function alerts network engineers when power failures or port breaks occur, and the switches are designed for harsh industrial environments, such as in hazardous locations (Class 1, Div. 2/Zone 2). The switches comply with FCC, TÜV, UL,

and CE standards, and come in two model types: standard operating temperature range of 0 to 60°C, and extended operating temperature range of -40 to 75°C. Both models undergo a 100% burn-in test to ensure that they fulfill the special needs of industrial automation control. The EDS-316/309/308/305 series Ethernet switches can be installed easily on a DIN-Rail or in a distribution box.

Redundant dual 24 VDC power inputs ›Relay output warning for power failure and port break alarm ›Broadcast storm protection ›Transmits VLAN tagged packets transparently ›-40 to 75˚C operating temperature range (T models) ›


IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3x for Flow Control

Processing Type: Store and Forward Flow Control: IEEE 802.3x flow control, back pressure flow control

InterfaceRJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connectionFiber Ports: 100BaseFX ports (SC/ST connector)LED Indicators: PWR1, PWR2, Fault, 10/100M (TP port), 100M (Fiber port)DIP Switch: Port break alarm maskAlarm Contact: One relay output with current carrying capacity of 1A @ 24 VDC

Optical Fiber

SpecificationsPower RequirementsInput Voltage: 24 VDC (12 to 45 VDC), redundant inputs (EDS-316/309)24 VDC (12 to 48 VDC), redundant inputs (EDS-308/305) (Input Current (@ 24 V):0.27A (EDS-316), 0.44A (EDS-316A, EDS-316-M, EDS-316A-S, EDS-316A-MM, EDS-316-SS, EDS-316-MS), 0.29A (EDS-309), 0.13A (EDS-308), 0.25A (EDS-308-M, EDS-308-S, EDS-308-MM, EDS-308-SS), 0.13A (EDS-305), 0.17A (EDS-305-M, EDS-305-S)

Overload Current Protection:1.6A (EDS-308-M, EDS-308-S, EDS-308-MM, EDS-308-SS, EDS-316, EDS-316-M, EDS-316-MM, EDS-316-MS, EDS-316-S, EDS-316-SS)1.1A (EDS-305, EDS-305-M, EDS-305-S, EDS-308)Connection: Removable 6-pin terminal blockReverse Polarity Protection: Present

Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): EDS-316 series: 80.5 x 135 x 105 mm (3.16 x 5.31 x 4.13 in.)EDS-309/308/305 series: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in.)Weight: EDS-316 series: 1140 g

EDS-309/308/305 series: 630 gInstallation: DIN-Rail mounting, wall mounting (optional kit)

Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F), -40 to 75°C (-40 to 167°F) for T modelsStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)

100BaseFX






Typical Distance

5 km,2 km (EDS-316-T)a

40 km c 80 km d4 km,

2 km (EDS-316-T)b


a. 50/125 μm, 800 MHz*km fiber optic cable b. 62.5/125 μm, 500 MHz*km fiber optic cable c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable d. 9/125 μm, 19 PS/(nm*km) fiber optic cable


3

Unmanaged

Ethernet Switches

0Overview

5

4

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation



80.5

Mounting Kit

Mounting Kit

Rear View

Rear View

Front ViewDIN-Rail Kit

DIN-Rail Kit Front View

Side View

Side View

[ EDS-316 series ]

[ EDS-309/308/305 series ]

EDS-305-M-SC

2

4

6

1

3

5

7

100M

10MEDS-309-3M-SC

8

TX

RX

TX

RX

9

Ethe

rDev

ice

Swit

ch

FAULT

PWR2

PWR1

100M 100M

100M

53.6 53.6 53.6

Regulatory ApprovalsSafety: EDS-316 series: UL508, UL60950-1, EN60950-1EDS-309/308/305 series: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 Hazardous Location: UL/cUL Class 1, Division 2, Groups A, B, C and D (EDS-316 Pending); ATEX Class 1, Zone 2, Ex nC IIC (EDS-316/309/308 Pending)Maritime: DNV, GLEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3

Shock: IEC 60068-2-27Free Fall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: EDS-316 series: 257,000 hrs

EDS-309 series: 396,000 hrsEDS-308 series: 255,000 hrsEDS-305 series: 422,000 hrsDatabase: MIL-HDBK-217F, GB 25˚C

*Please check Moxa’s website for the most up-to-date certification status.


EDS-316/309/308/305Unmanaged Ethernet Switches



3


itches EDS-316/309/308/305


Standard Temperature

(0 to 60˚C)

Extended Temperature

(-40 to 75˚C)10/100BaseT(X)

100BaseFX




Single Mode,SC Connector,

80 km EDS-316 SeriesEDS-316 EDS-316-T 16

EDS-316-M-SC EDS-316-M-SC-T 15 1

EDS-316-M-ST EDS-316-M-ST-T 15 1

EDS-316-MM-SC EDS-316-MM-SC-T 14 2

EDS-316-MM-ST EDS-316-MM-ST-T 14 2

EDS-316-MS-SC EDS-316-MS-SC-T 14 1 1

EDS-316-S-SC EDS-316-S-SC-T 15 1

EDS-316-SS-SC EDS-316-SS-SC-T 14 2

EDS-316-MS-SC-80 14 1 1

EDS-316-S-SC-80 15 1

EDS-316-SS-SC-80 14 2

EDS-316-SS-SC-40/80 14 1 1

EDS-309 SeriesEDS-309-3M-SC EDS-309-3M-SC-T 6 3

EDS-309-3M-ST EDS-309-3M-ST-T 6 3

EDS-308 SeriesEDS-308 EDS-308-T 8


EDS-308-MM-SC EDS-308-MM-SC-T 6 2

EDS-308-MM-ST EDS-308-MM-ST-T 6 2


EDS-308-SS-SC EDS-308-SS-SC-T 6 2

EDS-308-S-SC-80 EDS-308-S-SC-80-T 7 1

EDS-308-SS-SC-80 EDS-308-SS-SC-80-T 6 2

EDS-305 Series EDS-305 EDS-305-T 5


EDS-305-M-ST EDS-305-M-ST-T 4 1


EDS-305-S-SC-80 4 1




3

Unmanaged

Ethernet Switches

0Overview

5

4

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation


EDS-208A/205A/208/205Unmanaged Ethernet Switches

The EDS-208A/205A and EDS-208/205 are entry-level 8 and 5-port industrial Ethernet switches that support IEEE 802.3 and IEEE 802.3u/x with 10/100M full/half-duplex, MDI/MDI-X auto-sensing. The EDS-208A/205A switches provide 12/24/48 VDC (9.6 to 60VDC), 18 to 30 VAC redundant power inputs that can be connected simultaneously to live DC/AC power sources. In addition, the EDS-208A/205A switches are rated to operate at temperatures ranging from -10 to 60°C, and IP30-rated metal case is rugged enough for any harsh industrial environment. The EDS-208A/205A have DIP switches for enabling or disabling broadcast storm protection, providing another level of flexibility for different industrial applications. The

EDS-208A/205A/208/205 switches are easy to install on a DIN-or in distribution boxes. The DIN-Rail mounting capability and the IP30 case with LED indicators make these plug-and-play switches easy to use and extremely reliable.

Introduction

EDS-208A/205A/208/205 Series

10/100BaseT(X) (RJ45 connector), 100BaseFX (Multi mode, SC ›or ST connector)Supports IEEE 802.3/802.3u/802.3x ›Redundant dual 12/24/48 VDC, 18 to 30 VAC power inputs ›(EDS-208A/205A)IP30 metal case (EDS-208A/205A) ›-10 to 60°C operating temperature range ›



Processing Type: Store and ForwardFlow Control: IEEE 802.3x flow control, back pressure flow control

InterfaceRJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connectionFiber Ports: 100BaseFX ports (SC/ST connector, multi mode)LED Indicators: Power, 10/100M (TP port), and 100M (Fiber port)

Optical FiberDistance: 0 to 5 km, 1300 nm (50/125 μm, 800 MHz*km) 0 to 4 km, 1300 nm (62.5/125 μm, 500 MHz*km)Min. TX Output: -20 dBm Max. TX Output: -14 dBmRX Sensitivity: -34 to -30 dBm

Power RequirementsEDS-208A/205A series•

Input Voltage: 12/24/48 VDC (9.6 to 60 VDC), 18 to 30 VAC (47 to 63 Hz)Connection: Removable 4-contact terminal blockReverse Polarity Protection: Present

EDS-208/205 series•Input Voltage: 12 to 45 VDC, 18 to 30 VAC (47 to 63 Hz)

Specifications

Comparison Chart for EDS-200A/200 Ethernet SwitchesPower

RedundancyMetal Case DIP Switch* Power Range

EDS-200A √ √ √ 12/24/48 VDC (9.6 to 60 VDC)

EDS-200 12 to 45 VDC

*DIP switch for enabling or disabling broadcast storm protection.

Input Current (@ 24 V): 0.12A (EDS-205), 0.14A (EDS-208), 0.23A (EDS-208-M)Connection: Removable 3-contact terminal blockOverload Current Protection: 1.1AReverse Polarity Protection: Present

Physical CharacteristicsCasing: IP30 protection, metal case (EDS-208A/205A), plastic case (EDS-208/205) Dimensions (W x H x D): EDS-208A: 50 x 115 x 70 mm (1.96 x 4.52 x 2.76 in.)EDS-205A: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in.)EDS-208: 40 x 100 x 74 mm (1.57 x 3.94 x 2.91 in.)EDS-205: 25 x 100 x 74 mm (0.98 x 3.94 x 2.91 in.)Weight: EDS-208: 170 g EDS-205: 135 gInstallation: DIN-Rail mounting

Environmental LimitsOperating Temperature: -10 to 60°C (14 to 140°F)Storage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)

Regulatory ApprovalsSafety: EDS-208A: UL508 (Pending)

EDS-205A: UL508 (Pending) EDS-208: UL508, UL60950-1EDS-205: UL508

8 and 5-port entry-level unmanaged Ethernet switches

Preliminary



3


itches


Optional AccessoriesDR-4524: • 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24: • 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC input DR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchRK-4U: • 4U-high 19” rack mounting kit


Case Material Power RangeStandard Temperature (-10 to 60°C)

10/100BaseT(X)

100BaseFX




EDS-205A 5 Metal 12/24/48 VDC (9.6 to 60 VDC)

EDS-208A 8 Metal 12/24/48 VDC (9.6 to 60 VDC)

EDS-208A-M-SC 7 1 Metal 12/24/48 VDC (9.6 to 60 VDC)

EDS-208A-M-ST 7 1 Metal 12/24/48 VDC (9.6 to 60 VDC)EDS-208/205 Series

EDS-205 5 Plastic 12 to 45 VDC

EDS-208 8 Plastic 12 to 45 VDC

EDS-208-M-SC 7 1 Plastic 12 to 45 VDC

EDS-208-M-ST 7 1 Plastic 12 to 45 VDC


EDS-208A/205A/208/205

EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD)

EN61000-4-3 (RS) EN61000-4-4 (EFT) EN61000-4-5 (Surge) EN61000-4-6 (CS) EN61000-4-8 EN61000-4-11

Shock: IEC 60068-2-27

Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: EDS-208: 368,000 hrs Database: MIL-HDBK-217F, GB 25˚C EDS-205: 323,000 hrs Database: Telcordia (Bellcore), GB*Please check Moxa’s website for the most up-to-date certification status.


[ EDS-208/205 ]

Rear View

Rear View

Front View

Front View

Side View

Side View

Top & Bottom Views

Top & Bottom Views

25

[ EDS-208A/205A ]

DIN-Rail Kit

DIN-Rail Kit


PT-7828 IEC 61850-3 24+4G-port Layer 3 Gigabit modular managed Ethernet switch 4-6

PT-7728 IEC 61850-3 24+4G-port Gigabit modular managed Ethernet switch 4-9

PT-7710 IEC 61850-3 8+2G-port Gigabit modular managed Ethernet switch 4-12

PT-7324 IEC 61850-3 22+2G-port Gigabit smart Ethernet switch 4-14

IKS-6726 24+2G-port Gigabit modular managed Ethernet switch 4-16

IKS-6324 22+2G-port Gigabit unmanaged Ethernet switch 4-19

PM-7200 Gigabit Ethernet and fast Ethernet interface modules 4-21



4



4

Rackmount Ethernet Sw

itches


LED Display

Solution Tutorial

Powerful Ruggedized Rackmount SolutionSuitable for Demanding Power Utility and Transportation Applications

Gigabit Fiber Optic Cable (1000BaseSX/LX/LHX/ZX)Fiber Optic Cable (100BaseFX)Twisted Pair Cable (10/100BaseT(X) or 10/100/1000BaseT(X))Serial Cable (RS-232/422/485)

PLCs Embedded Computer

PT-7828 IEC 61850-3 Layer3 24+4G-port Managed Ethernet Switch

IKS-6726 24+2G-port Managed Ethernet Switch

IKS-6324 22+2G-port Unmanaged

Ethernet Switch

PT-7728

PT-7728IEC 61850-3 24+4G-port

Managed Ethernet Switch

Gigabit Turbo Ring

Gigabit Turbo Ring

Traffic Signals

IP Camera

IEDs

Up to 20 IEDs

Relays

HMI/SCADA HMI/SCADA Remote Dispatch Control Room

PT-7728

PT-7710 IEC 61850-3 8+2G-port Managed Ethernet Switch

PT-7324 IEC 61850-3 22+2G-port Smart Ethernet Switch


0

4

3

OverviewRackm

ount Ethernet Sw

itches

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation


Substation and transportation automation networks can be extremely large and cover expansive territories. Moxa’s rackmount Ethernet switches satisfy the scalable network requirements with long-haul fiber solutions from Layer 3 to Layer 2 Ethernet switches.

The PT-7828 Layer 3 Ethernet switch can divide a large network •into hierarchical sub-nets. Controlling network traffic on its own subnet can help to improve the performance of the entire network.

The Layer 2 modular managed • Ethernet switches PT-7728, PT-7710, and IKS-6726 support advanced network management and control functions, including VLAN, QoS, IGMP snooping,

LACP, and GMRP to optimize and prioritize network communica-tion.

The Layer 2 smart • Ethernet switch PT-7324 offers web-smart functions, such as port-based VLAN and QoS, to make network management easier.

The Layer 2 unmanaged IKS-6324 series of • Ethernet switches are reliable plug-and-play Ethernet communication solutions that give users an easy and economical way to connect with end devices.

* Please check the “Comparison Chart for Rackmount Ethernet Switches” on page 4-5 for details of features that each product model supports.

Moxa’s rackmount Ethernet switches provide multiple levels of redundant features:

Media RedundancyManaged rackmount Ethernet switches come with the world’s fastest Turbo Ring redundancy (20 ms @ 250 switches), and standard STP or RSTP redundant protocol. In addition to a single ring redundancy structure, Turbo Ring also provides multiple ring-coupling functions, such as “Ring Coupling,” “Dual Homing,” and “Dual Ring.”

Power Input RedundancyNon-stop operation is the key criterion for mission-critical applications. The PT-7828/7728 and IKS-6726 support dual, isolated, redundant power supplies with different power sources (24/48 VDC or 110/220 VAC/VDC input voltage). For example, you can choose 110/200 VAC/VDC as your main power source, and 48 VDC from a battery as your back up power source.

Configuration RedundancyThe ABC-01 backup configuration tool can both save and load configurations automatically when connected to a Moxa managed Ethernet switch. This novel management tool helps reduce downtime, and can be used for fast configuration duplication of large-scale networks.

* Please check the “Comparison Chart for Rackmount Ethernet Switches” on page 4-5 for details of features that each product model supports.

Ethernet has already penetrated into the industrial environment, and is widely adopted from control rooms to controllers and devices on the shop floor. Industrial Ethernet is not only being used in a wide range of vertical markets, but is also finding uses in different facets of each market. For example, IEC 61850-3 industrial Ethernet networks are applied as the physical medium for power substation automation, which means that a host of legacy field buses must be connected to the Ethernet network. The bottom line is that Industrial Ethernet is becoming the future trend for automation communication.

Different vertical markets require different solutions, which is why Moxa developed two distinct rackmount Ethernet switch product lines. The new PowerTrans PT series IEC 61850-3 rackmount Ethernet switch series and IKS industrial rackmount Ethernet switch series were developed to meet the needs of a variety of applications (see the table at the right).

Tailor-made Rackmount Solutions Fit Diverse Requirements

Two Product Lines for Diverse Applications

Applications

Substation automation Power automation

Rail traffic Traffic control center

Road traffic Marine & offshore

Certifications Required

IEC 61850-3/IEEE 1613 NEMA TS2

NEMA TS2 DNV/GL

EN 50121-4

DNV/GL

Moxa’s Solution

PowerTrans PT series IEC 61850-3 rackmount Ethernet switches

IKS series industrial rack-mount Ethernet switch

Solution TutorialRackmount Ethernet Switches

Redundancy for Higher Network Availability

Scalable Network Infrastructure Capability

Gigabit Turbo Ring

SAVE LOAD

ABC-01 ABC-01

Redundant power supplies (88-300 VDC/85-264 VAC, and 24/48 VDC)


4


itches


IEC 61850-3IEC 61850-3 specifically addresses environmental and electromagnetic interference (EMI) immunity for communications networks and systems in substations. The EMI immunity requirements are based on IEC 61000-6-5, which establishes performance criteria for key functions within the substation. To be compliant with the standard, critical functions, such as protection relay and control functions, on-line processing and regulation, as well as metering and network communication, must experience no delays or data loss when exposed to various EMI phenomena.

IEEE 1613IEEE 1613 is another industry standard that establishes EMI immunity requirements for networking devices in electric power substations. Included in this standard are ratings, environmental performance requirements, and testing requirements for compliant communication devices.

According to the IEEE 1613 standard, compliant devices may not experience permanent damage under EMI stress. Two different classes of devices are defined in the standard according to how EMI stress affects performance.

Class 1Compliant devices in this class may experience some data errors, losses, or delays under EMI stress conditions.

Class 2Compliant devices in this class must not experience any data errors, delays, or losses under EMI stress conditions.

The PowerTrans PT series is compliant with IEC 61850-3 and IEEE 1613 certifications specifying a high level of EMC, shock, and vibration in power substations.

Solution Tutorial

Certifications to Ensure Reliable Operation

Up to 4 Gigabit Ports for Backbone and UplinkAs industry adopts bandwidth-hungry applications such as video surveillance, there is a greater need for high bandwidth and fault-tolerance solutions with Gigabit Ethernet equipment. Demand is growing for applications in industrial networks that comprise multiple, interconnected Gigabit backbones among different network centers. Moxa offers a range of Gigabit managed Ethernet solutions that can be used to form a Gigabit backbone that connects to control centers, video-over-IP servers, Ethernet-enabled devices, or other Ethernet switches. These Gigabit Ethernet switches support fault-tolerant rings with fiber-optic ports, allowing operation in the toughest industrial environments.

Gigabit Ethernet is the trend, and we can already see a lot of work stations, HMA/SCADA equipment, and video monitoring panels that come standard with a Gigabit Ethernet interface in control rooms.

Moxa’s modular rackmount Ethernet switches come with up to 4 Gigabit combo ports for the PT-7828/7728 series. Other modular Ethernet switches include the managed PT-7710 Ethernet switch, the IKS-6726 Ethernet switch, the smart PT-7324 Ethernet switch, and the unmanaged IKS-6324 Ethernet switch, all of which support 2 Gigabit combo ports. Any combination of twisted pair and fiber optical ports can be chosen to form a redundant Gigabit Turbo Ring or connected to a Gigabit HMI/SCADA in the control room.

Media Configuration FlexibilityThe PT and IKS series modular Ethernet switches support different numbers of Gigabit and fast Ethernet interface modules that allow users to choose from a variety of copper/fiber media combinations. The modular design benefits users in three ways:

Higher flexibility for system design and fast network changes•Easy maintenance and lower cost of spare parts•Reduced cost of future upgrade•

Cabling FlexibilityMoxa’s rackmount Ethernet switches provide two options of cabling direction. Front cabling is ideal for maintenance, whereas rear cabling is neater and results in an arrangement that is safer in the event once a cable gets disconnected.

Future-proof Flexibility

The rugged design of the PowerTrans PT and IKS series Ethernet switches make them well-qualified for a diverse number of mission-critical communication applications in the power utility and transportation automation markets.

19-inch rack-mountable design to meet the installation needs of •substation and traffic control rooms.To perform flawlessly in the uncontrolled climates found in utility •

substations and industrial environments, these rackmount Ethernet switches are designed for fan-less operation in a wide temperature range of -40 to 85°C.-All PT series Ethernet switches are designed for use in a -40 to 85°C wide operating temperature range.

-All IKS series Ethernet switches are designed for use in a -40 to 75°C wide operating temperature range.

Power Substation Certifications

Rugged Design Suitable for Harsh Environments


0

4

3

OverviewRackm

ount Ethernet Sw

itches

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation


EN 50121-4EN 50121-4 defines the emission and immunity of signaling and telecommunication apparatus.

Model

PT-7828 28 4 24 √ √ √ √ √ √ √ √ √ √ √ √ √

PT-7728 28 4 24 √ √ √ √ √ √ √ √ √ √ √ √

PT-7710 10 2 8 √ √ √ √ √ √ √ √ √ √ √ √

PT-7324 24 2 22 √ √ √ √

IKS-6726 26 2 24 √ √ √ √ √ √ √ √ √ √ √ √

IKS-6324 24 2 22 √

Tota

l Num

ber o

f Por

tsGi

gabi

t Eth

erne

t(1

0/10

0/10

00 M

bps)

Fast

Eth

erne

t(1

0/10

0 M

bps)

IEC

6185

0-3,

IEEE

161

3

NEM

A TS

2

EN 5

0121

-4

DNV/

GL

Rout

ing

(Sta

tic, R

IP V

1/V2

)Tu

rbo

Ring

and

RST

P/ST

P

IGM

P sn

oopi

ng/G

MRP

Port

Trun

king

IEEE

802

.1X/

HTTP

S/SS

H

Port

Lock

SNM

P/RM

ON

802.

1Q V

LAN

Port-

base

d VL

AN

QoS

Isol

ated

Red

unda

nt P

ower

ABC-

01*

Comparison Chart for Rackmount Ethernet Switches

Port Interface Certification Features

*Operating temperature supported: -40 to 85˚C for PT series; -40 to 75˚C for IKS series.*ABC-01 is an RS-232 RJ45-based automatic backup configurator for Managed Ethernet Switches. Please check page 11-1 for detailed information.

Test NEMA TS2

Temperature -34 to 74˚C

Humidity 18% to 90% RH, non-condensing

Voltage 120 to 135 VAC @ 57 to 63 Hz

Vibration 0.5 g @ 5 to 30 Hz

Shock 10 G’s for 11 ms

Solution TutorialRackmount Ethernet Switches

Road Traffic Control System Standard

Railway Control System Standards

NEMA TS2 The National Electrical Manufacturers Association (NEMA) established the TS1 standard to define technically adequate and safe traffic control equipment. The TS2 standard was later introduced to address some drawbacks of the original guidelines. NEMA TS2 defines controllers, cabinets, and systems more completely than TS1, promotes better interchangeability, and allows for future expandability. Section 2 contains the environmental and testing requirements, including guidelines for temperature, humidity, voltage, vibration, and shock.

PT series and IKS series switches are compliant with the NEMA TS2 traffic control system standard.

Available Pending *Please check Moxa’s website for the most up-to-date certification status.


4


itches



IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,

IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMP v1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, RIP V1/V2, HTTP, HTTPS, Telnet, SSH, Syslog MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control

PT-7828 Series

Features and BenefitsStatic routing, RIP V1/V2 to divide a large network into hierarchical •sub-nets and allow data and information to communicate across networksTurbo Ring and RSTP/STP (IEEE 802.1w/D)•IGMP Snooping and GMRP for filtering multicast traffic from •industrial Ethernet protocolsIEEE 802.1Q VLAN and GVRP protocol to ease network planning•QoS-IEEE802.1p/1Q and TOS/DiffServ to increase determinism •802.3ad, LACP for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•

ABC-01 for system configuration backup•RMON for efficient network monitoring and proactive capability•Bandwidth management prevents unpredictable network status•Lock port for only authorized MAC address access•Port mirroring for online debugging•Automatic warning by exception through email, relay output•Automatic recovery of connected device’s IP addresses•Line-swap fast recovery•Configurable by Web browser, Telnet/Serial console, Windows •utility, and ABC-01

IntroductionThe PowerTrans PT-7828 is a high performance Layer 3 Ethernet switch that supports IP routing protocols, including static routing and RIP V1/V2, which facilitate the deployment of applications across networks. The PT-7828 is also designed to meet the strict demands of power substation automation systems (IEC 61850-3, IEEE 1613), traffic control systems (NEMA TS2), and railway applications (EN50121-4).

The PT-7828’s Gigabit and fast Ethernet backbone, redundant ring, and 24/48 VDC or 110/220 VDC/VAC dual isolated redundant power supplies increase the reliability of your communications and save on cabling/wiring costs. The modular design of the PT-7828 makes network planning easy, and allows greater flexibility by letting you install up to 4 Gigabit ports and 24 fast Ethernet ports. Optional front or rear wiring makes the PT-7828 suitable for a variety of applications.

Static routing and RIP V1/V2 supported ›IEC 61850-3, IEEE 1613 (power substations), NEMA TS2 (traffic ›control systems), and EN50121-4 (railway applications) compliantTurbo Ring and RSTP/STP for Ethernet redundancy ›Isolated redundant power inputs with universal 24/48 VDC or ›110/220 VDC/VAC power supply rangeModular design for various media options: RJ45, Fiber optic and ›SFP ports-40 to 85°C operating temperature range ›

Slot 1 Slot 2 Slot 3 Slot 4

PT-7828

Layer 3 Modular Rackmount Ethernet Switch System, PT-7828

Specifications

IEC 61850-3 24+4G-port Layer 3 Gigabit modular managed Ethernet switch

PT-7828


0

4

3

OverviewRackm

ount Ethernet Sw

itches

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation


PT-7828Rackmount Ethernet Switches


349.

3

44

440

31.8

457462.6480

325

Rear View

Top View

Front View

Side View


Interface Fast Ethernet: Slot 1, 2, 3 for any combination of 8-, 7-, or 6-port PM-7200 fast Ethernet modules with 10/100BaseT(X) or 100BaseFX (SC/ST connector) Gigabit Ethernet: Slot 4 for 4- or 2-port PM-7200 Gigabit Ethernet combo module with 10/100/1000BaseT(X) or 1000BaseSFP slotsConsole: RS-232 (RJ45)System LED Indicators: STAT, PWR1, PWR2, FAULT, MASTER, COUPLERModule LED Indicators: LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEEDAlarm Contact: One relay output with current carrying capacity of 3A@30 VDC or 3A@240 VAC

Power RequirementsInput Voltage: 24 VDC (18 to 36 V), or 48 VDC (36 to 72 V), or110/220 VDC/VAC (88 to 300 VDC and 85 to 264 VAC)Input Current: (all ports are equipped with fiber)Max. 2.58A @ 24 VDC, Max. 1.21A @ 48 VDC, Max. 0.64/0.33A @ 110/220 VDC,Max. 0.53/0.28A @ 110/220 VAC

Connection: 10-pin terminal blockOverload Current Protection: PresentReverse Polarity Protection: Present

Physical CharacteristicsCasing: IP30 protectionDimensions (W x H x D): 440 x 44 x 325 mm (17.32 x 1.73 x 12.80 in.)Weight: 5900 gInstallation: 19’’ rack mounting

Environmental LimitsOperating Temperature: -40 to 85°C (-40 to 185°F), cold start of min. 100 VAC at -40°CStorage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)

Regulatory ApprovalsSafety: EN60950-1 (Pending)Power Automation: IEC 61850-3, IEEE 1613Road Traffic: NEMA TS2Rail Traffic: EN50121-4 (Pending)Maritime: DNV (Pending), GL (Pending)EMI: FCC Part 15, CISPR (EN55022) class A*Please check Moxa’s website for the most up-to-date certification status



4


itches



Layer 3 Modular Rackmount Ethernet Switch System, PT-7828Layer 3 modular managed rackmount Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, for a total of up to 24+4G ports, -40 to 85°C

Optional AccessoriesABC-01: • Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro: • CD with EDS-SNMP OPC server software and manual

PT-7828 with power supply PM-7200 series(Gigabit or fast Ethernet)


*The PT-7828 Ethernet switch system is delivered without interface module. Please refer to page 4-21 to choose PM-7200 interface modules.

Product Model Power Supply

Front Cabling, Front Display

Rear Cabling, Front Display

Isolated Power Supply 1 Isolated Power Supply 2

24 VDC (18 to 36 V)

48 VDC (36 to 72 V)

HV: 88 to 300 VDC and 85 to

264 VAC

24 VDC (18 to 36 V)

48 VDC (36 to 72 V)


264 VAC

PT-7828-F-24 PT-7828-R-24 1

PT-7828-F-24-24 PT-7828-R-24-24 1 1

PT-7828-F-24-48 PT-7828-R-24-48 1 1

PT-7828-F-24-HV PT-7828-R-24-HV 1 1

PT-7828-F-48 PT-7828-R-48 1

PT-7828-F-48-48 PT-7828-R-48-48 1 1

PT-7828-F-48-HV PT-7828-R-48-HV 1 1

PT-7828-F-HV PT-7828-R-HV 1

PT-7828-F-HV-HV PT-7828-R-HV-HV 1 1

* The PT-7828 Layer 3 Ethernet switch systems provide 1 slot for Gigabit Ethernet interface modules and 3 slots for fast Ethernet interface modules. Please refer to page 4-21 to select the PM-7200 Gigabit Ethernet and fast Ethernet interface modules that you need for your own application.

PT-7828


0

4

3

OverviewRackm

ount Ethernet Sw

itches

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation



IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,

IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMP v1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, SyslogMIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control


PT-7728 Series

Features and BenefitsTurbo Ring and RSTP/STP (IEEE 802.1w/D)•IGMP Snooping and GMRP for filtering multicast traffic from •industrial Ethernet protocolsIEEE 802.1Q VLAN and GVRP protocol to ease network planning•QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism •802.3ad, LACP for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•RMON for efficient network monitoring and proactive capability•

ABC-01 for system configuration backup•Bandwidth management prevents unpredictable network status•Lock port for only authorized MAC address access•Port mirroring for online debugging•Automatic warning by exception through email, relay output•Automatic recovery of connected device’s IP addresses•Line-swap fast recovery•Configurable by Web browser, Telnet/Serial console, Windows •utility, and ABC-01

IntroductionThe PowerTrans PT-7728 is designed to meet the demands of power substation automation systems (IEC 61850-3, IEEE 1613), traffic control systems (NEMA TS2), and railway applications (EN50121-4). The PT-7728’s Gigabit and fast Ethernet backbone, redundant ring, and 24/48 VDC or 110/220 VDC/VAC dual isolated redundant power supplies increase the reliability of your communications and save on cabling/wiring costs.

The modular design of the PT-7728 also makes network planning easy, and allows greater flexibility by letting you install up to 4 Gigabit ports and 24 fast Ethernet ports. Along with the optional front or rear wiring, these features together make the PT-7728 suitable for a variety of industrial applications.

IEC 61850-3, IEEE 1613 (power substations), NEMA TS2 (traffic ›control systems), and EN50121-4 (railway applications) compliantTurbo Ring and RSTP/STP for Ethernet Redundancy ›Isolated redundant power inputs with universal 24/48 VDC or ›110/220 VDC/VAC power supply rangeModular design lets you choose from a variety of media ›combinations-40 to 85°C operating temperature range ›

Slot 1 Slot 2 Slot 3 Slot 4

PT-7728

Modular Rackmount Ethernet Switch System, PT-7728

Specifications



4


itches



349.

3

44

440

31.8

457462.6480

325

Side View

Front View

Rear View

Top View


Interface Fast Ethernet: Slot 1, 2, 3 for any combination of 8-, 7-, or 6-port PM-7200 fast Ethernet modules with 10/100BaseT(X) or 100BaseFX (SC/ST connector) Gigabit Ethernet: Slot 4 for 4- or 2-port PM-7200 Gigabit Ethernet combo module with 10/100/1000BaseT(X) or 1000BaseSFP slotsConsole: RS-232 (RJ45)System LED Indicators: STAT, PWR1, PWR2, FAULT, MASTER, COUPLERModule LED Indicators: LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEEDAlarm Contact: One relay output with current carrying capacity of 3A@30 VDC or 3A@240 VAC

Power Requirements Input Voltage: 24 VDC (18 to 36 V), or 48 VDC (36 to 72 V), or110/220 VDC/VAC (88 to 300 VDC and 85 to 264 VAC)Input Current: (all ports are equipped with fiber)Max. 2.58A @ 24 VDC, Max. 1.21A @ 48 VDC, Max. 0.64/0.33A @ 110/220 VDC,Max. 0.53/0.28A @ 110/220 VAC






PT-7728


0

4

3

OverviewRackm

ount Ethernet Sw

itches

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation




Optional AccessoriesABC-01:• Industrial RS-232, RJ45-based, automatic backup configuratorEDS-SNMP OPC Server Pro:• CD with EDS-SNMP OPC server software and manual

Modular Rackmount Ethernet Switch System, PT-7728Modular managed rackmount Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, for a total of up to 24+4G ports, -40 to 85°C



*The PT-7728 Ethernet switch system is delivered without interface mod-ule. Please refer to page 4-21 to choose PM-7200 interface modules.



Rear Cabling, Front Display


24 VDC (18 to 36 V)

48 VDC (36 to 72 V)


264 VAC

24 VDC (18 to 36 V)

48 VDC (36 to 72 V)


264 VAC

PT-7728-F-24 PT-7728-R-24 1

PT-7728-F-24-24 PT-7728-R-24-24 1 1

PT-7728-F-24-48 PT-7728-R-24-48 1 1

PT-7728-F-24-HV PT-7728-R-24-HV 1 1

PT-7728-F-48 PT-7728-R-48 1

PT-7728-F-48-48 PT-7728-R-48-48 1 1

PT-7728-F-48-HV PT-7728-R-48-HV 1 1

PT-7728-F-HV PT-7728-R-HV 1

PT-7728-F-HV-HV PT-7728-R-HV-HV 1 1

* The PT-7728 Ethernet switch systems provide 1 slot for Gigabit Ethernet interface modules and 3 slots for fast Ethernet interface modules. Please refer to page 4-21 to select the PM-7200 Gigabit Ethernet and fast Ethernet interface modules that you need for your own application.


4


itches



IEC 61850-3, IEEE 1613 (power substations), NEMA TS2 (traffic ›control systems), and EN50121-4 (railway applications) compliantTurbo Ring and RSTP/STP for Ethernet redundancy ›Universal power supply range, 24/48 VDC or 110/220 VDC/VAC ›Modular design lets you choose from a variety of media ›combinations-40 to 85°C operating temperature range ›

PT-7710 Series

Features and BenefitsTurbo Ring and RSTP/STP (IEEE 802.1w/D)•IGMP Snooping and GMRP for filtering multicast traffic from •industrial Ethernet protocolsPort-based VLAN, IEEE 802.1Q VLAN, and GVRP protocol to ease •network planningQoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism •802.3ad, LACP for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•

RMON for efficient network monitoring and proactive capability•ABC-01 for system configuration backup•Bandwidth management prevents unpredictable network status •Lock port for only authorized MAC address access•Port mirroring for online debugging•Automatic warning by exception through email, relay output•Automatic recovery of connected device’s IP addresses•Line-swap fast recovery•Configurable by Web browser, Telnet/Serial console, Windows •utility, and ABC-01

Introduction

The PowerTrans PT-7710 is designed to meet the demands of power substation automation systems (IEC 61850-3, IEEE 1613), traffic control systems (NEMA TS2), and railway applications (EN50121-4). The PT-7710’s Gigabit and fast Ethernet backbone, redundant ring, and 24/48 VDC or 110/220 VDC/VAC dual redundant power supplies

increase the reliability of the communications and reduce cabling and wiring costs. The modular design of the PT-7710 makes network planning easy, and allows greater flexibility by letting you install up to 2 Gigabit ports and 8 fast Ethernet ports, or 10 fast Ethernet ports.

Modular Rackmount Ethernet Switch System, PT-7710

Specifications

TechnologyStandards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3ab for 1000BaseT(X), IEEE 802.3z for 1000BaseSX/LX/LHX/ZX, IEEE 802.3x for Flow Control, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP,

M1 M2 PT-7710

Slot 1 Slot 2

PT-7710 IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMP v1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, SyslogMIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control



0

4

3

OverviewRackm

ount Ethernet Sw

itches

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation



219.

3 195

209.

4

44

44

266.7

266.7


Side ViewFront View

Rear View

Top View

InterfaceFast Ethernet: Slot 1 for any combination of 8-, 7-, or 6-port PM-7200 fast Ethernet modules with 10/100BaseT(X) or 100BaseFX (SC/ST connector), and Slot 2 for a 2- or 1-port interface modules with 100BaseFX (SC/ST connector)Gigabit Ethernet: Slot 2 for 2-port PM-7200 Gigabit Ethernet combo module with 10/100/1000BaseT(X) or 1000BaseSFP slots Console: RS-232 (RJ45)System LED Indicators: STAT, PWR1, PWR2, FAULT, MASTER, COUPLERModule LED Indicators: LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEEDAlarm Contact: One relay output with current carrying capacity of 3A@30 VDC or 3A@240 VAC

Power RequirementsInput Voltage: 24/48 VDC (9 to 60 V), or 110/220 VDC/VAC (88 to 300 VDC and 85 to 264 VAC)Input Current: (all ports are equipped with Fiber)Max. 0.81A @ 24 VDCMax. 0.42A @ 48 VDCMax. 0.17/0.10 @ 110/220 VDC,Max. 0.20/0.12 @ 110/220 VACConnection: 10-pin terminal block

Overload Current Protection: PresentReverse Polarity Protection: Present

Physical CharacteristicsCasing: IP30 protectionDimensions (W x H x D): 266.7 x 44 x 195 mm (10.5 x 1.73 x 7.68 in.)Weight: 2200 gInstallation: 19’’ rack mounting, wall mounting

Environmental LimitsOperating Temperature: -40 to 85°C (-40 to 185°F)Storage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)




Modular Rackmount Ethernet Switch System, PT-7710Modular managed rackmount Ethernet switch system with 1 slot for fast Ethernet modules, and 1 slot for fast Ethernet or Gigabit Ethernet modules, for a total of up to 10- or 8+2G- ports, -40 to 85°C



*The PT-7710 Ethernet switch system is delivered without interface module. Please refer to page 4-21 to choose PM-7200 interface modules.


Product Model Power SupplyRackmounting,Front Cabling,Front Display

Wall mounting,Down Cabling,Front Display

LV: 24/48 VDC (9 to 60 V) HV: 88 to 300 VDC and 85 to 264 VAC, isolated

PT-7710-F-LV PT-7710-D-LV 1

PT-7710-F-HV PT-7710-D-HV 1

* The PT-7710 Ethernet switch systems provide 1 slot for Gigabit Ethernet interface modules and 1 slot for fast Ethernet interface modules. Please refer to page 4-21 to select the PM-7200 Gigabit Ethernet and fast Ethernet interface modules that you need for your own application.


4


itches


PT-7324 Series

Features and BenefitsPort-based VLAN to ease network planning•802.1p priority queues and port-based QoS to increase determinism•

IntroductionThe PowerTrans PT-7324 smart Ethernet switch is designed to meet the demands of power substation automation systems (IEC 61850-3, IEEE 1613), traffic control systems (NEMA TS2), and railway applications (EN50121-4). The PT-7324 is also equipped with smart features, "Class of Service" features suitable for multimedia applications, and port-based

VLAN features that can be used to segment your network without being restricted by physical connections. If you do not want to receive too many broadcast packets, the broadcast storm filtering feature will discard broadcast packets if the number of such packets exceeds a threshold in a preset period of time.

IEC 61850-3, IEEE 1613 (power substations), NEMA TS2 (traffic ›control systems), and EN50121-4 (railway applications) compliantPort-based VLAN to enhance security/network performance ›802.1p priority queues, port-based QoS ›Smart web-based management makes configuration easy ›Universal power supply range, 24/48 VDC or 110/220 VDC/VAC ›-40 to 85°C operating temperature range ›

Smart Rackmount Ethernet Switch System, PT-7324


IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,IEEE 802.3x for Flow Control,IEEE 802.1p for Class of Service


Switch PropertiesPriority Queues: 2Max. Number of Available VLANs: 24

InterfaceRJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode and auto MDI/MDI-X connectionFiber Ports: 100BaseFX (SC/ST connector) or 1000BaseSFP slots *Slot 1 for 2-port PM-7200 Gigabit Ethernet combo module, or 2- or 1-port

PM-7200 fast Ethernet modules.

Specifications

PT-7324M1

Slot 1

LED Indicators: STAT, PWR1, PWR2, FAULT, LNK/ACT, FDX/HDX, SPEEDAlarm Contact: One relay output with current carrying capacity of 3A@30 VDC or 3A@240 VAC

Power RequirementsInput Voltage: 24/48 VDC (9 to 60 V), or HV: 88 to 300 VDC and 85 to 264 VACInput Current: Max. 0.68A @ 24 VDCMax. 0.35A @ 48 VDCMax. 0.17/0.11A @ 110/220 VDCMax. 0.33/0.23A @ 110/220 VACConnection: 10-pin terminal blockOverload Current Protection: PresentReverse Polarity Protection: Present



Broadcast storm filtering•

IEC 61850-3 22+2G-port Gigabit smart Ethernet switch

PT-7324



0

4

3

OverviewRackm

ount Ethernet Sw

itches

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation



457468.2479.9

31.8

254

274.

3

440

44

44

Side View

Front View

Rear View

Top View


Smart Rackmount Ethernet Switch System, PT-7324

Smart rackmount Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, for a total of up to 24 or 22+2G ports, -40 to 85°C



*The PT-7324 Ethernet switch system is delivered without interface module.Please refer to page 4-21 to choose PM-7200 interface modules.

Product Model Power SupplyFront Cabling, Front Display

Rear Cabling,Front Display


PT-7324-F-LV PT-7324-R-LV 1PT-7324-F-HV PT-7324-R-HV 1* The PT-7324 Ethernet switch systems provide 1 slot for Gigabit Ethernet or fast Ethernet interface modules. Please refer to page 4-21 to select the PM-7200

series Gigabit Ethernet and fast Ethernet interface modules that you need for your own application.




4


itches



IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,IEEE 802.3x for Flow Control,IEEE 802.1D for Spanning Tree Protocol,IEEE 802.1w for Rapid STP,

IEEE 802.1Q for VLAN Tagging, IEEE 802.1p for Class of Service, IEEE 802.1X for Authentication, IEEE 802.3ad for Port Trunk with LACPProtocols: IGMP v1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, SyslogMIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9Flow Control: IEEE 802.3x flow control, back pressure flow control


IKS-6726 Series

Features and BenefitsTurbo Ring and RSTP/STP (IEEE 802.1w/D)•IGMP Snooping and GMRP for filtering multicast traffic from •industrial Ethernet protocolsIEEE 802.1Q VLAN and GVRP protocol to ease network planning•QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism •802.3ad, LACP for optimum bandwidth utilization•IEEE 802.1X, HTTPS, and SSH to enhance network security•SNMPv1/v2c/v3 for different levels of network management•RMON for efficient network monitoring and proactive capability•

ABC-01 for system configuration backup•Bandwidth management prevents unpredictable network status •with "Lock port" to restrict access to authorized MAC addressesPort mirroring for online debugging•Automatic warning by exception through email, relay output•Automatic recovery of connected device’s IP addresses•Line-swap fast recovery•Configurable by Web browser, Telnet/Serial console, Windows •utility, and ABC-01

IntroductionThe industrial rackmount Ethernet switch IKS-6726 is designed to meet the demands of industrial application networks such as traffic control systems (NEMA TS2) and maritime applications (DNV/GL). The IKS-6726’s Gigabit and fast Ethernet backbone, redundant ring, and 24/48 VDC or 110/220 VDC/VAC dual isolated redundant power

supplies increase the reliability of your communications and save on cabling/wiring costs. The modular design of the IKS-6726 also makes network planning easy, and allows greater flexibility by letting you install up to 2 Gigabit ports and 24 fast Ethernet ports.

Meets UL 60950-1, NEMA TS2, and DNV/GL certifications ›Turbo Ring and RSTP/STP for Ethernet Redundancy ›Isolated redundant power inputs with universal 24/48 VDC or ›110/220 VDC/VAC power supplyModular design lets you choose from a variety of media ›combinations-40 to 75°C operating temperature range ›

Slot 1 Slot 2 Slot 3

IKS-6726

Modular Rackmount Ethernet Switch System, IKS-6726

Specifications


IKS-6726

Preliminary


0

4

3

OverviewRackm

ount Ethernet Sw

itches

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation


IKS-6726Rackmount Ethernet Switches


349.

3

44

440

31.8

457462.6480

325

Side View

Front View

Rear View

Top View

Interface Fast Ethernet: Slot 1 and 2 for any combination of 8-, 7-, or 6-port PM-7200 fast Ethernet modules with 10/100BaseT(X) or 100BaseFX (SC/ST connector) Gigabit Ethernet: Slot 3 for 2-port PM-7200 Gigabit Ethernet combo module with 10/100/1000BaseT(X) or 1000BaseSFP slotsConsole: RS-232 (RJ45)System LED Indicators: STAT, PWR1, PWR2, FAULT, MASTER, COUPLERModule LED Indicators: LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEEDAlarm Contact: One relay output with current carrying capacity of 3A@30 VDC or 3A@240 VAC

Power Requirements Input Voltage: 24 VDC (18 to 36 V), or 48 VDC (36 to 72 V), or110/220 VDC/VAC (88 to 300 VDC and 85 to 264 VAC)Connection: 10-pin terminal blockOverload Current Protection: PresentReverse Polarity Protection: Present

Physical CharacteristicsCasing: IP30 protectionDimensions (W x H x D): 440 x 44 x 325 mm (17.32 x 1.73 x 12.80 in.)Installation: 19’’ rack mounting


Regulatory ApprovalsSafety: EN60950-1 (Pending)Maritime: DNV (Pending), GL (Pending)Road Traffic: NEMA TS2EMI: FCC Part 15, CISPR (EN55022) class A*Please check Moxa’s website for the most up-to-date certification status



4


itches




Modular Rackmount Ethernet Switch System, IKS-6726Modular managed rackmount Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, for a total of up to 24+2G ports, -40 to 75°C

IKS-6726 with power supply PM-7200 series(Gigabit or fast Ethernet)


*The IKS-6726 Ethernet switch system is delivered without interface module. Please refer to page 4-21 to choose PM-7200 interface modules.




24 VDC (18 to 36 V)

48 VDC (36 to 72 V)


264 VAC

24 VDC (18 to 36 V)

48 VDC (36 to 72 V)


264 VAC

IKS-6726-F-24 1

IKS-6726-F-24-24 1 1

IKS-6726-F-24-48 1 1

IKS-6726-F-24-HV 1 1

IKS-6726-F-48 1

IKS-6726-F-48-48 1 1

IKS-6726-F-48-HV 1 1

IKS-6726-F-HV 1

IKS-6726-F-HV-HV 1 1

* The IKS-6726 Ethernet switch systems provide 1 slot for Gigabit Ethernet interface modules and 2 slots for fast Ethernet interface modules. Please refer to page 4-21 to select the PM-7200 Gigabit Ethernet and fast Ethernet interface modules. IKS-6726


0

4

3

OverviewRackm

ount Ethernet Sw

itches

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation


IKS-6726Rackmount Ethernet Switches

IKS-6324 Series

IntroductionThe industrial rackmount Ethernet switch IKS-6324 is designed to meet the demands of industrial application networks such as traffic control systems (NEMA TS2), and maritime applications (DNV/GL). The IKS-6324 is a 24-port industrial 19” rackmount Ethernet switch series that provides a rugged and economical solution for your industrial Ethernet connections. Up to two fast Ethernet fiber optic ports and combo Gigabit Ethernet TP or fiber optic ports can be

chosen to make the construction of a reliable Ethernet network easy. A universal power supply range of 24/48 VDC or 110/220 VDC/VAC give users greater flexibility in choosing power inputs. The Ethernet switches comply with UL standards and support a wide operating temperature range of -40 to 75°C. All models undergo a 100% burn-in test to ensure that they fulfill the special needs of industrial automation control applications.

Meets UL 60950-1, NEMA TS2, and DNV/ GL certifications ›Universal power supply range, 24/48 VDC or 110/220 VDC/VAC ›Redundant dual 24 VDC power inputs ›-40 to 75˚C operating temperature range ›

Unmanaged Rackmount Ethernet Switch System, IKS-6324


IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,IEEE 802.3x for Flow Control,


InterfaceRJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode and auto MDI/MDI-X connectionFiber Ports: 100BaseFX (SC/ST connector) or 1000BaseSFP slots *Slot 1 for 2-port PM-7200 Gigabit Ethernet combo module, or 2- or 1-port

PM-7200 fast Ethernet modules.

LED Indicators: STAT, PWR1, PWR2, FAULT, LNK/ACT, FDX/HDX, SPEEDAlarm Contact: One relay output with current carrying capacity of 3A@30 VDC or 3A@240 VAC

Power RequirementsInput Voltage: 24/48 VDC (9 to 60 V), or 110/220 VDC/VAC (88 to 300 VDC and 85 to 264 VAC)

Specifications

M1 IKS-6324

Slot 1


Physical CharacteristicsCasing: IP30 protectionDimensions (W x H x D): 440 x 44 x 254 mm (17.32 x 1.73 x 10.00 in.)Installation: 19’’ rack mounting


Regulatory ApprovalsSafety: EN60950-1 (Pending)Maritime: DNV (Pending), GL (Pending)Road Traffic: NEMA TS2EMI: FCC Part 15, CISPR (EN55022) class A*Please check Moxa’s website for the most up-to-date certification status


22+2G-port Gigabit unmanaged Ethernet switch

Preliminary



4


itches


457468.2479.9

31.8

254

274.

3

440

44

44

Side View

Front View

Rear View

Top View


Unmanaged Rackmount Ethernet Switch System, IKS-6324

Unmanaged rackmount Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, for a total of up to 24 or 22+2G ports, -40 to 75°C

IKS-6324 with power supply PM-7200 series(Gigabit or fast Ethernet)


*The IKS-6324 Ethernet switch system is delivered without interface module.Please refer to page 4-21 to choose PM-7200 interface modules.

Product Model Power SupplyFront Cabling, Front Display


IKS-6324-F-LV 1

IKS-6324-F-HV 1

* The IKS-6324 Ethernet switch systems provide 1 slot for Gigabit Ethernet or fast Ethernet interface modules. Please refer to page 4-21 to select the PM-7200 series Gigabit Ethernet and fast Ethernet interface modules that you need for your own application.

IKS-6324


0

4

3

OverviewRackm

ount Ethernet Sw

itches

5

6

7

8

9

10

12

Wireless


Peer-to-PeerI/O

Modular

Remote I/O

Media


11

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ation


Gigabit Ethernet Interface Modules, PM-7200-2G/4G series

InterfaceRJ45 Ports: 10/100/1000BaseT(X) auto negotiation speed, and auto MDI/MDI-X connection

Fiber Ports: 1000BaseSFP slots* The PM-7200-2G/4G series Gigabit Ethernet combo modules support 2 or 4

SFP slots. Please refer to page 2-23 to select the SFP-1G series Gigabit Ethernet modules.

PM-7200-4GTXSFP PM-7200-2GTXSFP

4- or 2-port Gigabit Ethernet and 8-, 7-, 6-, 2-, or 1-port fast Ethernet interface modules for PT and IKS series rackmount Ethernet switches

PM-7200 Series Interface Modules

Fast Ethernet Interface Modules, PM-7200 series

InterfaceRJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection

Fiber Ports: 100BaseFX ports (SC/ST connector)

Optical Fiber

PM-7200-1LSC6TX

PM-7200-8TX

PM-7200-2MSC PM-7200-2SSC

PM-7200-4MSC2TX PM-7200-4SSC2TX

PM-7200-2MST4TX

PM-7200-6MSC PM-7200-6SSC

PM-7200-4MST2TX PM-7200-2MSC4TX PM-7200-2SSC4TX

PM-7200-2MST PM-7200-1MSC PM-7200-1SSC

PM-7200-1MST

PM-7200-6MST

Specifications

100BaseFX










PM-7200Rackmount Ethernet Switches


4


itches



Rackmount Ethernet Switch System and Interface Module Compatibility Chart


Combo Port, 10/100/1000BaseT(X) or 1000BaseSFP*

PM-7200-2GTXSFP 2

PM-7200-4GTXSFP 4

*The PM-7200-2G/4G series Gigabit Ethernet combo modules support 4 or 2 SFP slots. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.

Fast Ethernet Modules for PT and IKS Series Rackmount Ethernet Switches, PM-7200 Series

Product Model

Port Interface

10/100BaseT(X)100BaseFX




Single Mode, SC Connector, 80 km

PM-7200-8TX 8

PM-7200-6MSC 6

PM-7200-6MST 6

PM-7200-6SSC 6

PM-7200-4MSC2TX 2 4

PM-7200-4MST2TX 2 4

PM-7200-4SSC2TX 2 4

PM-7200-2MSC4TX 4 2

PM-7200-2MST4TX 4 2

PM-7200-2SSC4TX 4 2

PM-7200-1LSC6TX 6 1

PM-7200-2MSC 2

PM-7200-2MST 2

PM-7200-2SSC 2

PM-7200-1MSC 1

PM-7200-1MST 1

PM-7200-1SSC 1

Interface Module

Product Model

PT-7828 √ √ √ √ √ √ √ √ √ √ √ √ √

PT-7728 √ √ √ √ √ √ √ √ √ √ √ √ √

PT-7710 √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √

PT-7324 √ √ √ √ √ √ √

IKS-6726 √ √ √ √ √ √ √ √ √ √ √ √

IKS-6324 √ √ √ √ √ √ √

PM-7

200-

4GTX

SFP

PM-7

200-

2GTX

SFP

PM-7

200-

1MSC

PM-7

200-

1MST

PM-7

200-

2MSC

PM-7

200-

2MST

PM-7

200-

1SSC

PM-7

200-

2SSC

PM-7

200-

8TX

PM-7

200-

2MSC

4TX

PM-7

200-

2MST

4TX

PM

-720

0-2S

SC4T

X

PM-7

200-

4MSC

2TX

PM-7

200-

4MST

2TX

PM-7

200-

4SSC

2TX

PM-7

200-

6MSC

PM-7

200-

6MST

PM-7

200-

6SSC

PM-7

200-

1LSC

6TX

PM-7200

Gigabit Ethernet Modules for PT and IKS Series Rackmount Ethernet Switches, PM-7200-2G/4G Series


AWK-3121 Advanced industrial wireless AP/Bridge/Client 5-5

AWK-1200 Outdoor wireless AP/Bridge or AP Client 5-7

AWK-1100 Industrial wireless AP/Bridge/AP Client 5-9

Accessories IEEE 802.11a/b/g omni & directional antennas 5-11


Industrial Wireless Ethernet

5Industrial Wireless Ethernet



5


Solution Tutorial

802.11a 802.11b 802.11g

Approval Date September 1999 September 1999 June 2003

Compatibility IEEE 802.11a compliant IEEE 802.11b compliant IEEE 802.11b/g compliant

Number of Channels 8 non-overlapping (4 in some countries)

3 non-overlapping 3 non-overlapping

Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps

Wireless Medium Orthogonal Frequency Division Multiplexing (OFDM), 5 GHz

Direct Sequence Spread Spectrum (DSSS), 2.4 GHz

Orthogonal Frequency Division Multiplexing (OFDM), 2.4 GHz

Getting un-Wired with IEEE 802.11

Are you ready for the convenience that comes from sending your Ethernet packets over the air instead of through a wire? Wireless is not for everyone, but if your application uses mobile equipment that is controlled over a TCP/IP network, or the cost of installing wire conduits at your work site is prohibitive, then consider setting up a wireless local area network (WLAN). The IEEE 802.11 standard

specifies a way to use radio frequency (RF) technology to send Ethernet packets over the air. Applications that include TCP/IP will run on 802.11-compliant WLANs the same as they do over Ethernet. By common agreement between regulatory agencies around the world (FCC, ETSI, etc.), a WLAN transmits over unlicensed spectrums, with only minor variations from country to country.

Introduction

802.11 Specifications

Typical Wireless Network Configurations

A wireless LAN is configured for either Ad-hoc mode or Infrastructure mode. In Ad-hoc mode, stations use peer-to-peer transmission to send information from station to station, without requiring an AP (Access Point) to connect to a wired network. This is the easiest and least expensive way to set up a wireless network. Alternatively,

Infrastructure mode requires using an AP. The AP can be used by itself to set up a WLAN, or can be used to connect the WLAN to a wired network. In either case, all wireless communication goes through the AP.

AP Client

Panel PC

AP Client

PLC

AP Client

PLC

AP Client

Panel PC

Mobile Device

Access Point

Ethernet

Ad-hoc Mode Infrastructure Mode


0

5

4

OverviewW

ireless Ethernet

6

7

8

9

10

12

Active Ethernet I/O

Peer-to-PeerI/O

Modular

Remote I/O

Media


Ordering Inform

ation

11

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


Benefits of Using Wireless Technology

What makes wireless networking a natural choice for many networking requirements?Flexibility: Wireless networks work anywhere, anytime.Easy Deployment: Wireless networks are ideal for those hard to wire areas.High Performance: Wireless networks have the bandwidth and safeguards needed to keep essential applications running continuously.Cost Effective: Wireless networks can be installed quickly, and help reduce the cost of cabling and maintenance.

One of the biggest concerns raised by potential users of WLAN technology is safety. Since data is transmitted by radio waves, how can users guarantee the confidentiality of their information? To provide secure transmission over wireless networks, Moxa provides WPA (Wi-Fi Protected Access) and WPA2 security specifications to overcome weaknesses in Wired Equivalent Privacy (WEP). In addition, Moxa’s

wireless products incorporate several important features to meet the stringent demands of industrial applications, including redundant power inputs, operating temperature ranges of either 0 to 60°C or -40 to 75°C (T models) and DIN-Rail mounting capability. The enhanced reliability of these products makes them a great choice for your wireless industrial applications.

Moxa’s Wireless Solutions for Industrial Markets

WPA (Wi-Fi Protected Access)

Moxa’s wireless products support the WPA/WPA2 standards proposed by the Wi-Fi Alliance (http://www.wi-fi.org). Both WPA-PSK (Pre-Shared Key) mode and full WPA mode are supported. WPA includes

TKIP (Temporal Key Integrity Protocol) and IEEE 802.1X, and replaces WEP by providing better WLAN security.

IEEE 802.1X/RADIUS

When configured for AP/Bridge mode, Moxa’s wireless products authenticate wireless users and distribute encryption keys dynamically with IEEE 802.1X Port-based Network Access Control and RADIUS

(Remote Authentication Dial-In User Service). The following authentication methods are supported: EAP-MD5, EAP-TLS, EAP-TTLS, and PEAP.

WLAN Security

Security Protocols Features Status

WEP (Wired Equivalent Privacy) Data encryption with RC4•

User-name/password authentication not provided•Standard

TKIP (Temporary Key Integration Protocol) Enhanced WEP with extended WEP IV length•

Packet Integration Check•Available

802.1X

Uses EAP (Extensible Authentication Protocol) for port-based •authentication

Supports RADIUS, Kerberos, and other authentication services•Available

WPA (Wi-Fi Protected Access)

TKIP, 802.1X, MIC (Message Integration Check)•

Supports RADIUS for authentication•

Backward upgradeable to all systems•

Available

802.11i (WPA2) WPA+AES cipher•Available in AWK-3121, AWK-1200-AP


The AWK-3121/1100 provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs

fails, the other live source acts as a backup to provide the AWK-3121 and AWK-1100’s power needs automatically.

Solution TutorialIndustrial Wireless Ethernet



5


Typical Industrial Application of Wireless Ethernet

Video Encoder

Analog Camera

PC

Twisted Pair Cable (10/100BaseT(X))Coaxial Cable

AWK-1200-AP

AWK-1100

Mobile Device

Industrial Wireless AP/Bridge/AP Client

HMI

AWK-1200-AC

PC

AWK-3121

Managed Ethernet Switch

Outdoor Wireless AP/Bridge

Outdoor Wireless AP Client

Industrial Wireless AP/Bridge/Client

Solution Tutorial

Comparison Chart for Wireless Ethernet Products

Model

AWK-3121 √ √ √ √ √ IP30 802.11a/b/g 0 to 60˚C,-40 to 75˚C (T model)

√ √ √

AWK-1200-AP √ √ √ √ √ IP68 802.11b/g -20 to 70˚C √ √

AWK-1200-AC √ √ √ √ IP67 802.11b/g -20 to 70˚C √ √

AWK-1100 √ √ √ √ IP30 802.11b/g 0 to 60˚C √ √ √

64-b

it a

nd

128-

bit W

EP E

ncry

ptio

n

WPA

WPA

2

IEEE

802

.1X

Hid

e S

SID

IP R

atin

g

Sta

ndar

d

Oper

atin

g Te

mpe

ratu

re

Pow

er R

edun

danc

y

DIN-

Rail

Mou

ntin

g

Wal

l Mou

ntin

g

Mas

t Mou

ntin

g

Security Features


0

5

4

OverviewW

ireless Ethernet

6

7

8

9

10

12

Active Ethernet I/O

Peer-to-PeerI/O

Modular

Remote I/O

Media


Ordering Inform

ation

11

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


Industrial IEEE 802.11a/b/g wireless Access Point/Bridge/ClientAWK-3121 Series

IEEE 802.11a/b/g compliant ›Power input by redundant 24 VDC power inputs or ›Power-over-EthernetPowerful security with WPA/WPA2/802.1X/MAC address filtering ›DIN-Rail or wall mounting ability ›IP30 protected high-strength metal case ›

WLANStandards: IEEE 802.11a/b/g for Wireless LAN,IEEE 802.3u for 10/100BaseT(X),IEEE 802.3af for Power-over-Ethernet,IEEE 802.1D for Spanning Tree Protocol,IEEE 802.1w for Rapid STPModulation: 802.11b: DBPSK, DQPSK, CCK802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM802.11a: OFDM with BPSK, QPSK, 16QAM, 64QAMData Rate and Modulation: OFDM @ 54 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBSK @ 1 Mbps Operating Channels: US: 2.412 to 2.462 GHz; 11 channels5.15 to 5.35, 5.725 to 5.825 GHz; 12 channels EU: 2.412 to 2.472 GHz; 13 channels5.15 to 5.35 GHz; 8 channels5.47 to 5.725 GHz; 11 channelsJP: 2.412 to 2.472 GHz; 13 channels, OFDM

2.412 to 2.484 GHz; 14 channels, CCK5.15 to 5.35 GHz; 8 channels (W52, W53)5.47 to 5.725 GHz; 11 channels (W56) Security: 64-bit and 128-bit WEP encryption, WPA/WPA2 (IEEE 802.1X/RADIUS and TKIP)Data Rates: 802.11b support rates: 1Mbps, 2Mbps, 5.5Mbps, 11Mbps802.11a/g support rates: 6Mbps, 9Mbps, 12Mbps,18Mbps, 24Mbps, 36Mbps, 48Mbps, 54MbpTransmit Power: 802.11b: 1 to 11 Mbps: Typ. 18 dBm (+/- 1.5 dBm)802.11g: 6 to 24 Mbps: Typ. 18 dBm (+/- 1.5 dBm); 36 to 48 Mbps: Typ. 16 dBm (+/- 1.5 dBm); 54 Mbps: Typ. 15 dBm (+/- 1.5 dBm)802.11a: 6 to 24 Mbps: Typ. 16 dBm (+/- 1.5 dBm); 36 to 48 Mbps: Typ. 14 dBm (+/- 1.5 dBm); 54 Mbps: Typ. 13dBm (+/- 1.5 dBm)RX Sensitivity:802.11b: -92 dBm @ 1 Mbps; -90 dBm @ 2 Mbps; -88 dBm @ 5.5 Mbps; -84 dBm @ 11 Mbps802.11g: -87 dBm @ 6 Mbps; -86 dBm @ 9 Mbps; -85 dBm @ 12 Mbps; -82 dBm @ 18 Mbps; -80 dBm @ 24 Mbps; -76 dBm @ 36 Mbps; -72 dBm @ 48 Mbps; -70 dBm @ 54 Mbps

Specifications

IntroductionAre your industrial applications hard to wire, or are your wiring costs out of control? Are you already using mobile equipment that connects over a TCP/IP network? If so, then what you need is the AWK-3121 Access Point/Bridge/Client. The AWK-3121 is rated to operate at temperatures ranging from 0 to 60°C for standard models and -40 to 75°C for extended temperature models, and is rugged enough for any

harsh industrial environment. Installation is easy, with either DIN-Rail mounting or distribution boxes. The DIN-Rail mounting ability, wide operating temperature range, and IP30 case with LED indicators make the AWK-3121 a convenient yet reliable solution for any industrial wireless application.

Advanced security64-bit and 128-bit WEP (Wired Equivalent Privacy)•Enable/disable SSID broadcasts•MAC-address-based access control•IEEE 802.1X/RADIUS•WPA (Wi-Fi Protected Access)/WPA2•

Useful utilities and remote configurationFirmware upgrade from TFTP or HTTP•Console/Web-based management•SNMP and UPnP supported•Configuration backup and reset•

AWK-3121Industrial Wireless Ethernet

Preliminary



5


AWK-3121


802.11a: -87 dBm @ 6 Mbps; -86 dBm @ 9 Mbps; -85 dBm @ 12 Mbps; -82 dBm @ 18 Mbps; -80 dBm @ 24 Mbps; -76 dBm @ 36 Mbps; -72 dBm @ 48 Mbps; -70 dBm @ 54 Mbps

Interface Antenna: 2 dBi dual-band, omni-directional antennaConnector: RP-SMA (female)RJ45 Port: 10/100BaseT(X) auto negotiation speedLED Indicators: PWR1, PWR2, PoE, FAULT, STATE, CLIENT MODE, BRIDGE MODE, WLANConsole: RS-232 (RJ45)Alarm Contact: 1 relay output with current carrying capacity of 1A @ 24 VDCDigital Inputs: 2 inputs, electrically isolated from the electronics

+13 to +30V for state “1”•-30 to -3V for state “0”•Max. input current: 8 mA•

Power RequirementsInput Voltage: ±12 to 48 VDC, redundant dual DC power inputs or

48 VDC Power-over-Ethernet (IEEE 802.3af)Connection: 10-pin removable terminal blockReverse Polarity Protection: Present


AWK-3121-US:• IEEE 802.11a/b/g wireless AP/Bridge/Client, US band, 0 to 60˚CAWK-3121-EU:• IEEE 802.11a/b/g wireless AP/Bridge/Client, EU band, 0 to 60˚CAWK-3121-JP:• IEEE 802.11a/b/g wireless AP/Bridge/Client, JP band, 0 to 60˚CAWK-3121-US-T:• IEEE 802.11a/b/g wireless AP/Bridge/Client, US band, -40 to 75˚CAWK-3121-EU-T:• IEEE 802.11a/b/g wireless AP/Bridge/Client, EU band, -40 to 75˚CAWK-3121-JP-T:• IEEE 802.11a/b/g wireless AP/Bridge/Client, JP band, -40 to 75˚C

Optional Accessories ABC-01:• Industrial RS-232 RJ45-based automatic backup configuratorDR-4524:• 45W/2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U:• 4U-high 19” rack mounting kit


Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in.)Installation: DIN-Rail mounting, wall mounting (optional kit)

Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F), -40 to 75˚C (-40 to 167˚F) for T modelsStorage Temperature: -40 to 85˚C (-40 to 185˚F)Ambient Relative Humidity: 5% to 95% (non-condensing)

Regulatory ApprovalsSafety: EN60950, UL60950-1, UL508, UL2043 (Pending)Hazardous Location:UL/cUL Class I, Division 2, Groups A, B, C and D (Pending);ATEX Class I, Zone 2, Ex nC IIC (Pending)Radio: EN300 328, ARIB STD-33/66 (Japan)EMC: EN301 489-1/-17EMI: FCC Part 15*Please check Moxa’s website for the most up-to-date certification status.



0

5

4

OverviewW

ireless Ethernet

6

7

8

9

10

12

Active Ethernet I/O

Peer-to-PeerI/O

Modular

Remote I/O

Media


Ordering Inform

ation

11

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


IEEE 802.11g/b wireless Access Point/Bridge and AP Client for outdoors

AWK-1200 Series

Advanced security capability64-bit and 128-bit WEP (Wired Equivalent Privacy)•Enable/disable SSID broadcasts•MAC-address-based access control•IEEE 802.1X/RADIUS•WPA/WPA2 •

Useful utilities and remote configurationFirmware upgrade from HTTP•Web-based management •SNMP supported•Configuration backup and reset to factory default•

IP68 rated wireless Access Point/Bridge and IP67 rated ›wireless AP Client Point-to-point, point-to-multipoint wireless connectivity ›WEP/WPA/WPA2/IEEE 802.1X authenticator supported ›-20 to 70°C operating temperature range ›

WLANStandards: IEEE 802.11g/b for Wireless LAN, IEEE 802.3u for 10/100BaseT(X) Frequency Range: 2.4-2.4835 GHz, Direct Sequence Spread Spectrum (DSSS)Data Rate & Modulation: OFDM @ 54 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, and DBSK @ 1 MbpsOperating Channels: USA: 1-11 (US)Europe: 1-13 (EU)Japan: 1-14 (JP) Security: For AWK-1200-AP: WEP, WPA, WPA2, IEEE 802.1X, MAC address filtering, Hide SSID, Layer 2 IsolationFor AWK-1200-AC: 64-bit and 128-bit WEP encryption, WPA

Data Rates: 1 Mpbs, 2 Mbps, 5.5 Mbps, 6 Mbps, 9 Mbps, 11 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps, 48 Mbps, 54 MbpsTransmit Power: Typ. 17 dBm @ 1, 2, 5.5 and 11 Mbps, 17 dBm @ 6 Mbps, 14 dBm @ 54 MbpsRX Sensitivity: 802.11b:-89 dBm @ 11 Mbps802.11g:-65 dBm @ 54 Mbps, -66 dBm @ 48 Mbps,-70 dBm @ 36 Mbps, -74 dBm @ 24 Mbps,-77 dBm @ 18 Mbps, -79 dBm @ 12 Mbps,-81 dBm @ 9 Mbps, -82 dBm @ 6 Mbps

Software FeaturesProtocols: HTTP, DHCP, TCP/IP, RADIUS, DNS, NetBIOS, AppleTalk, and IPX/SPXConfiguration: Web-based managementClient OS Support: Windows 95/98/2000/ME/NT/XP, Unix, and Macintosh

Specifications

IntroductionThe AWK-1200 Access Point/Bridge or AP Client is ideal for applications that are hard to wire, too expensive to wire, or use mobile equipment that connects to a TCP/IP network. The AWK-1200 series is rated to operate at temperatures ranging from -20 to 70°C, and its weatherproof design allows you to set up a WLAN, or extend existing wired networks to outdoor locations. In addition, the AWK-1200 series

has a detachable antenna design, which gives you the flexibility of choosing your own special-purpose antennas instead of using the standard models. You also don’t need to worry about finding a power supply in outdoor environments, since the AWK-1200’s PoE (Power- over-Ethernet) design makes it easy to deploy.




5



AWK-1200

Interface Antenna: 5dBi External (AWK-1200-AP),

9dBi Internal (AWK-1200-AC)Connector: N-type female connector (AWK-1200-AP only)RJ45 Port: 10/100BaseT(X) auto negotiation speed

Power RequirementsInput Voltage: Active Ethernet, 48 VDCInput Current (@ 48 VDC, PoE): AWK-1200-AP: 0.38A AWK-1200-AC: 0.375A

Physical CharacteristicsCasing: IP68 (AWK-1200-AP), IP67 (AWK-1200-AC)Dimensions (W x H x D): AWK-1200-AP: 284.4 x 254.3 x 77.5 mm (11.20 x 10.01 x 3.05 in.)AWK-1200-AC: 165.8 x 195.8 x 60.3 mm (6.53 x 7.71 x 2.37 in.) Weight:AWK-1200-AP: 3100 gAWK-1200-AC: 600 g

AWK-1200-AP-US:• IEEE 802.11g/b IP68 wireless AP/Bridge, US band, -20 to 70°CAWK-1200-AP-EU:• IEEE 802.11g/b IP68 wireless AP/Bridge, Euro band, -20 to 70°CAWK-1200-AP-JP:• IEEE 802.11g/b IP68 wireless AP/Bridge, Japan band, -20 to 70°CAWK-1200-AC-US:• IEEE 802.11g/b IP67 wireless AP Client, US band, -20 to 70°CAWK-1200-AC-EU:• IEEE 802.11g/b IP67 wireless AP Client, Euro band, -20 to 70°CAWK-1200-AC-JP:• IEEE 802.11g/b IP67 wireless AP Client, Japan band, -20 to 70°C


Mounting Kit Rear ViewFront View Side View

[ AWK-1200-AC ]

55.5

141.

5

132

120

120132

123.4

141.5

120

132

165.8

195.

8

207.

6

60.3

284.4 77.5

254.

3

437.

6

155

192.

8

6

17

154

154

37

37

297

272

15

182

68.5155.5

45

Mounting Kit Rear ViewFront View Side View

[ AWK-1200-AP ]

Installation: Wall mounting, mast mounting


Regulatory ApprovalsSafety: EN60950-1: 2001, UL60950-1Radio: EN300 328EMC: EN301 489-1/-17EMI: FCC Part 15CMTBF: over 200,000 hrs Database: GB, GC (Ground Benign, Controlled) 25˚C



0

5

4

OverviewW

ireless Ethernet

6

7

8

9

10

12

Active Ethernet I/O

Peer-to-PeerI/O

Modular

Remote I/O

Media


Ordering Inform

ation

11

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


Industrial IEEE 802.11g/b wireless Access Point/Bridge/AP Client

AWK-1100 Series

IEEE 802.11g/b compliant ›Power input by redundant 24 VDC power inputs or ›Power-over-EthernetPowerful security with WPA/802.1X/MAC address filtering ›DIN-Rail or panel mounting ability ›IP30 protected high-strength metal case ›

WLANStandards: IEEE 802.11g/b for Wireless LAN, IEEE 802.3u 10/100BaseT(X) for Ethernet LAN, IEEE 802.3af for Power-over-Ethernet

Frequency Range: 2.4-2.4835 GHz, Direct Sequence Spread Spectrum (DSSS)

Data Rate & Modulation: OFDM @ 54 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, and DBSK @ 1 Mbps

Operating Channels: USA: 1-11 (US) Europe: 1-13 (EU) Japan: 1-14 (JP)

Security: 64-bit and 128-bit WEP encryption, WPA (IEEE 802.1X/RADIUS and TKIP)

Data Rates: 1 Mpbs, 2 Mbps, 5.5 Mbps, 6 Mbps, 9 Mbps, 11 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps, 48 Mbps, 54 Mbps

Transmit Power: Typ. +18 dBm (+/- 1.5 dBm) @ 11Mbps, +14 dBm (+/- 1.5 dBm) @ 54Mbps

RX Sensitivity:802.11b: -81 dBm @ 11 Mbps, -85 dBm @ 5.5 Mbps, -86 dBm @ 2 Mbps, -87 dBm @ 1 Mbps802.11g: -68 dBm @ 54 Mbps, -70 dBm @ 48 Mbps, -74 dBm @ 36 Mbps, -78 dBm @ 24 Mbps, -81 dBm @ 18 Mbps, -84 dBm @ 12 Mbps, -85 dBm @ 9 Mbps, -86 dBm @ 6 Mbps

Specifications

IntroductionAre your industrial applications hard to wire, or are your wiring costs out of control? Are you already using mobile equipment that connects over a TCP/IP network? If so, then the AWK-1100 Access Point/Bridge/AP Client could be what you’re looking for. The AWK-1100 is rated to operate at temperatures ranging from 0 to 60°C, and is rugged enough for any harsh industrial environment. Installation is easy with

either DIN-Rail mounting or distribution boxes. The DIN-Rail mounting ability, wide operating temperature range, and IP30 case with LED indicators make AWK-1100 a convenient yet reliable solution for any industrial wireless application.

Advanced security capability64-bit and 128-bit WEP (Wired Equivalent Privacy)•Enable/disable SSID broadcasts•MAC-address-based access control•IEEE 802.1X/RADIUS•WPA (Wi-Fi Protected Access)•

Useful utilities and remote configurationFirmware upgrade from TFTP or HTTP•Web-based management •SNMP and UPnP supported•Configuration backup and reset•




5



AWK-1100

Software FeaturesProtocols: HTTP, DHCP, TCP/IP, RADIUSConfiguration: Web-based managementClient OS Support: Windows 95/98/2000/ME/NT/XP, Unix, and Macintosh

Interface Antenna: 2 dBi omni-directional antenna Connector: RP-SMA connectorRJ45 Port: 10/100BaseT(X) auto negotiation speed

LED Indicators: PWR1, PWR2, WLAN, LAN (Link/ACT)

Power RequirementsInput Voltage: 12 to 45 VDC, redundant dual DC power inputs or

48 VDC Power-over-Ethernet (IEEE 802.3af)Input Current (@ 24 V): 0.3 AOverload Current Protection: 1.6 AConnection: Removable terminal blockReverse Polarity Protection: Present


Dimensions (W x H x D): 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in.)

Weight: 800 g

Installation: DIN-Rail mounting, wall mounting (optional kit)

Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F)Storage Temperature: -20 to 70°C (-4 to 158°F)Ambient Relative Humidity: 5% to 95% (non-condensing)

Regulatory ApprovalsSafety: EN60950-1, UL60950-1Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending);ATEX Class I, Zone 2, Ex nC IIC (Pending)

Radio: EN300 328

EMC: EN301 489-1/-17

EMI: FCC Part 15C

MTBF: 200,000 hrs Database: MIL-HDBK-217F, GB 25˚C*Please check Moxa’s website for the most up-to-date certification status.



AWK-1100-US:• IEEE 802.11g/b wireless AP/Bridge/AP Client, US band, 0 to 60°CAWK-1100-EU:• IEEE 802.11g/b wireless AP/Bridge/AP Client, Euro band, 0 to 60°CAWK-1100-JP: • IEEE 802.11g/b wireless AP/Bridge/AP Client, Japan band, 0 to 60°C

Optional Accessories DR-4524:• 45W/2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U: • 4U-high 19” rack mounting kit



0

5

4

OverviewW

ireless Ethernet

6

7

8

9

10

12

Active Ethernet I/O

Peer-to-PeerI/O

Modular

Remote I/O

Media


Ordering Inform

ation

11

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


IEEE 802.11b/g 2.4 GHz Antennas

Antennas and Accessories

Frequency Range: 2.4-2.5 GHz

Antenna Type: Omni-directional

Antenna Gain: 9 dBi

Impedance: 50 ohms

Polarization: Vertical

Radiation Angle: 360° horizontal, 12° vertical

SWR (Standing Wave Ratio): ≤ 1.5:1

Connector: N-Female

Dimensions (H): 390 mm (15.35 in.)

Weight: 370 g

Installation: U-bolt installation kit


Antenna Type: Directional, Flat Panel

Antenna Gain: 12 dBi

Impedance: 50 ohms


Radiation Angle: 50° horizontal, 30° vertical

SWR (Standing Wave Ratio): ≤ 1.5:1

Connector: N-Female

Dimensions (W x H x D): 90 x 275 x 30 mm (3.54 x 10.83 x 1.18 in.)

Weight: 500 g

Installation: Wall mounting, swivel mounting kit (optional kit)

AntennasIndustrial Wireless Ethernet


Antenna Type: 1/4 Dipole Sleeve

Antenna Gain: 2 dBi (typical)

Impedance: 50 ohms nominal

Polarization: Linear


Antenna Type: 1/4λ Dipole Sleeve

Antenna Gain: 5 dBi (typical)

Impedance: 50 ohms nominal


Type of Radiation: Toroidal

V.S.W.R: < 2

Connector: RP-SMA (male)

Antenna Profile: 108 mm length

Cable Length: 150 mm

V.S.W.R: < 2


IEEE 802.11a/b/g 2.4 & 5 GHz Dual-band Antenna

Frequency Range: 2.4-2.5 GHz & 4.9-5.8 GHz

Antenna Peak Gain: 2 dBi (typical)

Antenna Average Gain: 1 dBi (typical)

Impedance: 50 ohms

HPBW/Horizontal: 360°

HPBW/Vertical: 80°

Polarization: Linear, Vertical

V.S.W.R: < 2

Power Handling: 2W (cw)


ANT-WDB-O-2

ANT-WSB-O-02

ANT-WSB-O-5-150

ANT-1-O-09

ANT-1-D-12



5


Ordering Information ANT-WDB-O-2: • IEEE 802.11a/b/g 2.4 & 5 GHz dual-band antenna, RP-SMA (female) connectorANT-WSB-O-02: • IEEE 802.11b/g 2.4 GHz, omni-directional antenna, RP-SMA (female) connectorANT-WSB-O-5-150:• IEEE 802.11b/g 2.4 GHz, omni-directional antenna, RP-SMA (female) connector, with 150mm cableANT-1-O-09:• 2.4 GHz, omni-directional, 9 dBi antenna, N-Female connectorANT-1-D-12:• 2.4 GHz, directional, 12 dBi antenna, N-Female connectorCRF-N0117SA-3M: • CFD200 cable, N-Male to RP SMA Male connector, 3 meters (for AWK-3121 and AWK-1100 only)

*This cable is necessary for the devices, which have RP-SMA connector, to connect with optional antenna.

CRF-N0429N-3M:• CFD400 cable, N-Male to N-Male connector, 3 meters (for AWK-1200-AP only)*This cable is necessary for AWK-1200-AP to connect with optional antenna.

Optional AccessoriesHA-1002SU:• Swivel mounting kit, swivel angle 90° horizontal, 40° vertical

*Supports ANT-1-D-12 by adjusting the angle for use with different wireless applications.

Antennas

Active Ethernet I/O Tutorial 6-2

ioLogik E2210 Active Ethernet I/O with 12 DI, 8 DO 6-8

ioLogik E2212 Active Ethernet I/O with 8 DI, 8 DO, 4 DIO 6-9

ioLogik E2214 Active Ethernet I/O with 6 DI, 6 relay outputs 6-10

ioLogik E2240 Active Ethernet I/O with 8 AI, 2 AO 6-11

ioLogik E2242 Active Ethernet I/O with 4 AI, 12 configurable DIO 6-12

ioLogik E2260 Active Ethernet I/O with 6 RTD inputs, 4 DO 6-13

ioLogik E2262 Active Ethernet I/O with 8 TC inputs, 4 DO 6-14

Serial Remote I/O Tutorial 6-15

ioLogik R2110 RS-485 I/O with 12 DI, 8 DO 6-16

ioLogik R2140 RS-485 I/O with 8 AI, 2 AO 6-17

Accessories Snap-on LCD module 6-18

Active Ethernet I/O

6Active Ethernet I/O




6

Active Ethernet I/O

Efficient and Intelligent Ethernet I/O

Solution Tutorial

SNMP Software Custom SoftwareMXIO Library

SCADA

ioLogik 4000Modular Remote I/O

Gigabit Ethernet Switch

Gigabit Fiber Optic Cable (1000BaseSX/LX/LHX/ZX)Fiber Optic Cable (100BaseFX)Twisted Pair Cable (10/100BaseT(X) or 10/100/1000BaseT(X))RS-485 Serial Cable

IP Camera

Video Encoder

ioLogik E2210/E2212/E2214Active Ethernet I/Ow/ DI, DO, & Relay

ioLogik E2240/2242Active Ethernet I/Ow/ AI & AO

ioLogik E2260/2262 Active Ethernet I/Ow/ Temperature Input & DO

ioMirror E3210 Ethernet Peer-to-Peer I/O w/ DI & DO

ioLogik R2110/2140Serial I/O w/ DI & DO, AI & AO

ioMirrorEthernet Peer-to-Peer I/O

Gigabit Turbo Ring

Serial Device Server

Real-time Remote Monitoring and Alarm


5

Wireless

Ethernet0

Overview

7

8

9

10

12

Peer-to-PeerI/O

Modular

Remote I/O

Media


11

4

3

2

1

6

Active Ethernet I/OM

odularEthernetSwitches

Managed

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

Active Message for Event Report

Click&Go for Local I/O Control MXIO Library for Easier Programming

E2000 Active Ethernet I/ONew Generation I/O that Talks over Ethernet

The Active Ethernet I/O is a new concept that introduces proactive, condition-based reporting and control of I/O devices to PC-based data acquisition and control. I/O status of an Active Ethernet I/O can be automatically reported and controlled locally based on user specified conditions. This report-by-exception approach, new to PC-based I/O monitoring, requires far less bandwidth than traditional polling

methods. Critical sensor data can be obtained immediately instead being confined by the use of to polling intervals. This makes network communication between the host computer and Active Ethernet I/O concise and efficient, and makes data transmission 20 times faster compared with traditional SCADA systems (50 ms compared to 1 sec).

Local logic control with no learning •curve, no third-party programming, and no maintenance feesDramatic reduction in project •implementation time

Why Choose Active Ethernet I/O?

Bandwidth saving with no polling efforts•Off-line local control without Host•Easy TCP/UDP and SNMP Trap with I/O status•Real-time event time stamp•

Built-in Web Console for Configuration and MonitoringConfiguring the network •parametersSetup the I/O Mode•Monitoring the I/O status •and value

No Modbus addressing required•VB and VC for Windows support•Various options for Windows, •WinCE, and Linux platforms

Active Ethernet I/O Solution Tutorial



6

Active Ethernet I/O

Best Companion with PC and Embedded Computer

Unique LCD Module for PC-free Management

Intuitive Windows Utility

Online Documentation

Remote Monitoring over TCP/IP Network

The Most User-friendly I/O for Remote Monitoring and Alarm Application

In addition to providing easy-to-use utilities, the ioLogik remote I/O also comes with an online wiring guide to help you troubleshoot problems easily without needing to refer to the manual. The online guide lists key features of I/O points, and displays a conversion table for analog input/output points.

The ioLogik Ethernet remote I/O allows you to remotely monitor all I/O status over TCP/IP network. Time and traveling cost is therefore

preserved via remote monitoring functionality.

The ioLogik 2000 series stand-alone remote I/O provides an optional LCD module for on-site management and configuration. The unique display module can display network and I/O settings. You may change network settings to ensure the speed of installation and future maintenance.

The ioLogik series is designed for PC environment which Windows utility and MXIO library for both Windows and Linux systems

are provided, MXIO library are especially designed for PC-based automation.

The ioLogik remote I/O comes with a very user-friendly Windows utility that includes remote configuration, firmware updates, and I/O testing and monitoring functions. These functions can save you many hours of installation and troubleshooting, and all settings can be saved to a file for future reference.Solution Tutorial


5

Wireless

Ethernet0

Overview

7

8

9

10

12

Peer-to-PeerI/O

Modular

Remote I/O

Media


11

4

3

2

1

6



Managed

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

Most Applications Using Active Ethernet I/O

The Active Ethernet I/O is an ideal solution for applications in remote monitoring, data collection, asset/environment control and notification:

Server rooms for temperature and humidity control, back-up •power supply initiation, and moreBuildings, shopping-centers, and airports for temperature and •humidity controlRoadside cabinets for telecommunication/power industries•Air-conditioning and heating unit supervision•Tank level monitoring and pump control•

Door and window sensors in airports and museums•Warehouse temperature and humidity control•Medical storage•Food and chemical industry•Shopping mall visitor tracking•

There are many ways that Active Ethernet I/O can be used to enhance your existing applications, improve your system’s cost effectiveness, or help you develop new and more powerful applications.Local intelligence

No programming

Supports SNMP read/write/trapSupports I/O control using SNMP management software

Event Mailer (SMTP protocol)

Send temperature information using SMTPUser-defined mail content

Library for: Windows, Linux, WinCE 5.0

Visual Basic, Visual C++, Borland C++, Microsoft.NET

Instant Event Reporting by Input Status

Improves data acquisition and control system efficiencyMore accurate and timely measurements to prevent data loss

On/Off light

If DI_0=On, Then DO_0=On

Mail to: [email protected]: temperature=26°C

Counter = 1

Thermometer

HP Openview/What's Up Software People Counter

26°C

Liquid Heating System with ioLogik E2260

Motor

Low limit

High limit

Ethernet / TCP / IP

Watertank

HighLow

Transmit "Active Message" based on difference of two valuesLocal control of stirring machine through DO channel

Transmit "Active Message" based on averageLocal control of heater through DO channel DO-Stir Machine

RTD1 39˚CRTD2 42˚CRTD3 45˚C

DO Heater

Local Alarm & I/O Control

SNMP to I/O (SNMP protocol)

Average

Deviation

RTD3-RTD1 = 6

(RTD1+RTD2+RTD3)/3 = 42

Instead of relying on host computers that continually poll I/O devices for data, the Active Ethernet I/O can proactively report sensor status using TCP or UDP messages. Proactive messaging allows much faster notification of I/O events and generates much lower network and CPU loads. Message content is fully customizable, and up to 10 simultaneous destinations are supported.

The Active Ethernet I/O can be configured for SNMP management of I/O control and reporting. Customized SNMP traps can be triggered by I/O events such as a light switch turning on. SNMP software can be used for sophisticated automation, monitoring, and control of sensors and switches over Ethernet.

Local intelligenceNo programming








On/Off light



Counter = 1

Thermometer


26°C


Motor

Low limit

High limit

Ethernet / TCP / IP

Watertank

HighLow




DO Heater



Average

Deviation

RTD3-RTD1 = 6

(RTD1+RTD2+RTD3)/3 = 42

The Active Ethernet I/O can be used for simple output control that is triggered by input status, without a PC controller. For example, a door sensor can be configured to trigger an alarm. Configuration is done through simple If/Then statements, and no programming is required.









On/Off light



Counter = 1

Thermometer


26°C


Motor

Low limit

High limit

Ethernet / TCP / IP

Watertank

HighLow




DO Heater



Average

Deviation

RTD3-RTD1 = 6

(RTD1+RTD2+RTD3)/3 = 42









On/Off light



Counter = 1

Thermometer


26°C


Motor

Low limit

High limit

Ethernet / TCP / IP

Watertank

HighLow




DO Heater



Average

Deviation

RTD3-RTD1 = 6

(RTD1+RTD2+RTD3)/3 = 42

The ioLogik Temperature I/O brings intelligence to temperature sensors. It’s equipped virtual channels which are available to calculate the average value of each channel and the difference between two substantial channels. And it doesn’t need any controller or PC.

Active Ethernet I/O Solution Tutorial



6

Active Ethernet I/O

Wiring Examples for Active Ethernet I/O

Digital Input

Digital Input (Dry Contact) DI Wet Contact - Source Type DI Wet Contact - Sink Type

DI5

DI4

DI3

DI2

DI1

DI0

DI.C

OM

GN

D

+ -Brown

24 VNPN Output

0 VBlackBlue

DI.C

OM

1

DI0

DI1

DI2

GN

D

N.C

.

DI.C

OM

2

DI3

DI4

DI5

GN

D

N.C

.

+ -Brown

24 VPNP Output

0 VBlackBlue

DI.C

OM

1

DI0

DI1

DI2

GN

D

N.C

.

DI.C

OM

2

DI3

DI4

DI5

GN

D

N.C

.

Applied I/O Models:

E2210, E2212, E2214, R2110

Applied I/O Models:

E2210, E2212, E2214, R2110

Applied I/O Models:

E2212, E2214

Digital Output

Digital Output Relay Output

DO

.PW

R

DO

0

DO

1

DO

2

DO

3

DO

4

DO

5

DO

6

DO

7

DO

.GN

D

-+

Loads

AC/DC Power Source

R0_NO

GN

D

R0 N

O

R3 N

O

R2 C

R2 N

O

R4 C

R4 N

O

R3 C

R5 C

R5 N

O

R1 C

R1 N

O

R0 C

Applied I/O Models:E2210, E2212, E2214, E2242, E2260, E2262, R2110

Applied I/O Models:E2214

Analog Input / Output

Analog Input Analog Output

Vin

0+

Vin

0-

Vin

1+

Vin

1-

Vin

2+

Vin

3+

Vin

3-

Vin

2-

Vin

3+

Vin

3-

Vou

t0+

Vou

t0-

lou

t0+

Vou

t1+

lou

t1+

lou

t0-

Vou

t1-

lou

t1-

Applied I/O Models:E2240, E2242, R2140

Applied I/O Models:E2240, R2140

Temperature Input

RTD Input (2-Wire RTD) RTD Input (3-Wire RTD) Thermocouple Input

1

TC

611 66

EX IN

4

IN EX

4

EX

1 3 5

EX

1

TC

11

EX IN IN EX

5

EX

5

EX

RTD RTD RTD RTD RTD RTD RTD RTD RTD RTD RTD RTD

4 5 54 5 54 4

EX0

IN0+

IN0-

EX1

IN1+

IN1-

EX2

IN2+

IN2-

EX3

IN3+

IN3-

EX0

IN0+

IN0-

EX1

IN1+

IN1-

EX2

IN2+

IN2-

EX3

IN3+

IN3-1

TC

611 66

EX IN

4

IN EX

4

EX

1 3 5

EX

1

TC

11

EX IN IN EX

5

EX

5

EX

RTD RTD RTD RTD RTD RTD RTD RTD RTD RTD RTD RTD

4 5 54 5 54 4

EX0

IN0+

IN0-

EX1

IN1+

IN1-

EX2

IN2+

IN2-

EX3

IN3+

IN3-

EX0

IN0+

IN0-

EX1

IN1+

IN1-

EX2

IN2+

IN2-

EX3

IN3+

IN3-

TC

0+

0- 1

+1

-2

+ 2-

TC

3+

3- 4

+4

-5

+ 5-

6+

6- 7

+7

-0

+

00

-0

- 1+

1+

1-

1-

2+

2+ 2

-2

-3

+3

+3

-3

- 4+

4+

4--

5+

5+ 5

--6

+6

+6

-6

- 7+

7+

7-

7-

TCTC TCTC TCTC TCTC TCTC TCTC TCTC TCTC

TC TC TC TC TC TC TC TC

4- 5- 6- 7-+4 +5 +6 +7

EX0+

EX0-

EX1+

EX1-

EX2+

EX2-

EX3+

EX3-

Applied I/O Model:

E2260

Applied I/O Model:

E2260

Applied I/O Model:E2262

Solution Tutorial


5

Wireless

Ethernet0

Overview

7

8

9

10

12

Peer-to-PeerI/O

Modular

Remote I/O

Media


11

4

3

2

1

6



Managed

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

[ ioLogik E2000/R2000 Series ]

9.51

8.2545.63

5.95 24.44

79

10.98

9.5

11593.02

120.3

64.6

3.81

57.5

6.89

3.39

793.

4

44.5 35.1

LANEthernet: 10/100Mbps, RJ45

Protection: 1.5 KV magnetic isolation

Protocols: Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for

I/O and Network), HTTP, SNTP

SerialInterface: RS-485-2w: Data+, Data-, GND

Serial Line Protection: 15 KV ESD for all signals

Serial Communication ParametersParity: None

Data Bits: 8

Stop Bits: 1

Flow Control: None

Speed: 1200 to 115200 bps

Protocol: Modbus/RTU

Power RequirementsPower Input: 24 VDC nominal, 12 to 48 VDC

DO Power: 24 VDC nominal, up to 30 VDC

Physical CharacteristicsWiring: I/O cable max. 14AWG

Environmental LimitsOperation Temperature: -10 to 60°C (14 to 140°F)



Agency ApprovalsEMI: FCC Part 15, CISPR (EN55022) class A

EMS: IEC 61000-4, IEC 61000-6

Safety: UL508

Shock: IEC 60068-2-27




Common Specifications for ioLogik Active Ethernet I/O


Input OutputDIO

Digital Analog RTD Thermocouple Digital Relay Analog

E2210 12 8

E2212 8 8 4

E2214 6 6

E2240 8 2

E2242 4 12

E2260 6 4

E2262 8 4

I/O

Model

Side View Front View Rear View

Selection Guide for Active Ethernet I/O

Active Ethernet I/O Common Specifications



6

Active Ethernet I/O

E2210

Digital InputChannels: 12, source type

I/O Mode: DI or Event Counter (up to 900 Hz)

Dry Contact: Logic 0: short to GND, Logic 1: open

Wet Contact: Logic 0: 0 to 3 VDC, Logic 1: 10 to 30 VDC (DI COM to DI)

Common Type: 12 points per COM

Isolation: 3K VDC or 2K Vrms

Specifications

Instant event messaging by TCP/UDP/e-mail/SNMP trap ›DI counter saving when power off ›Easy-to-use Click&Go™ Logic for local output control ›12-point 24 VDC digital input with counter ›8-point 24 VDC digital output with pulse output ›PC-based configuration utility and web console ›I/O control over Modbus/TCP and SNMP protocol ›Windows/WinCE VB/VC and Linux C API ›Peer-to-Peer I/O without controller ›

Introduction

Simple applications without programmingThe ioLogik E2210 makes the trigger event result in digital alarm output directly. Using the ioAdmin UI to setup by “IF-THEN” logic rules, without the needs to write program of PC or Controllers to make it true.

Software event counter input and pulse outputEach digital input can be independently configured for DI or Event Counter mode, and output can be independently configured for DO or Pulse Output mode.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

DI.C

OM

DI0

DI1

DI2

DI3

DI4

DI5

DI6

DI7

DI8

DI9

DI10

DI11

DI.G

ND

DO.P

WR

DO0

DO1

DO2

DO3

DO4

DO5

DO6

DO7

DO.G

ND

Pin Assignment

I/O (left to right)

Digital OutputChannels: 8, sink type, 45 VDC, 200 mA

I/O Mode: DO or Pulse Output (up to 100 Hz)

On-state Voltage: 24 VDC nominal

Output Current Rating: Max. 200 mA per channel


Protection: Over-temperature shutdown: min. 175°C Over-current limit: typ. 400 mA/channel

ioLogik E2210:• Active Ethernet I/O with 12 digital inputs and 8 digital outputs LDP1602: • LCD module with 16 x 2 text display and 5 buttons


ioLogik E2210

Active Ethernet I/O with 12 digital inputs and 8 digital outputs


5

Wireless

Ethernet0

Overview

7

8

9

10

12

Peer-to-PeerI/O

Modular

Remote I/O

Media


11

4

3

2

1

6



Managed

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

Active Ethernet I/O with 8 digital inputs, 8 digital outputs, and 4 configurable DIO

E2212

Digital InputChannels: 8 fixed pointsSensor Type: 2 6-point groups for NPN/PNP typeI/O Mode: DI or Event Counter (up to 900Hz)Dry Contact: Logic 0: short to GND, Logic 1: openWet Contact: Logic 0: 0 to 3 VDC, Logic 1: 10 to 30 VDCCommon Type: 6 points per COM Isolation: 3K VDC or 2K VrmsLow Speed Counter/Frequency: 900 Hz, power off storageOver-voltage Protection: 36 VDCPoweroff Counter Memory: 48 Bytes

Digital Output Channels: 8 fixed points sink, 45 VDC, 200 mAMagnetic Isolation: 2K Vrms or 3K VDCPulse Wave Width: 10 ms/100 HzOver-voltage Protection: 45 VDCOver-current Limit: 400 mA (typical)Over-temperature Shutdown: 175°C (min.)

DI/DO Configurable ChannelsChannels: 4I/O Mode: DI or Event Counter (Up to 900 Hz) DO or Pulse Output (Up to 100 Hz)

Selectable digital I/O combination by software ›Accepts PNP or NPN sensors ›Instant event messaging by TCP/UDP/e-mail/SNMP trap ›Easy-to-use Click&Go™ Logic for local output control ›PC-based configuration utility and web console ›I/O control over Modbus/TCP and SNMP protocol ›Windows/WinCE VB/VC and Linux C API ›Peer-to-Peer I/O without controller ›

Specifications

Introduction

Flexible digital input/output configurationThe ioLogik E2212 provides system integrators with the flexibility to handle various field demands with channels that can be configured by software for input or output operation. You can configure the I/O channels to suit your needs, for combinations such as 12 inputs/8 outputs, 8 inputs/12 outputs, or 10 inputs/10 outputs.

Single Ethernet DIO that accept 3 types of sensorsUnlike traditional Ethernet I/O products, the ioLogik E2212 can connect to dry contact, PNP, and NPN sensors at the same time. You can choose the sensor type based on your wiring approach.

Pin Assignment

I/O (left to right)1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

DI.C

OM1

DI0

DI1

DI2

DI3

DI4

DI5

DI.C

OM2

DI6

DI7

DIO8

DIO9

DIO1

0

DIO1

1

GND

DO0

DO1

DO2

DO3

DO4

DO5

DO6

DO7

DO.P

WR

ioLogik E2212: • Active Ethernet I/O, with 8 digital inputs, 8 digital outputs, and 4 DIOsLDP1602: • LCD module with 16 x 2 text display and 5 buttons


Active Ethernet I/O ioLogik E2212



6

Active Ethernet I/O

E2214

Digital InputChannels: 6 fixed pointsSensor Type: NPN, PNP, and Dry contactI/O Mode: DI or Event Counter (up to 900 Hz)Dry Contact: Logic 0: short to GND, Logic 1: openWet Contact: Logic 0: 0 to 3 VDC,

Logic 1: 10 to 30 VDCCommon Type: 6 points/2 COM Isolation: 2K VDC or 3K VrmsCounter Frequency: 900 HzDigital Filtering Time Interval: 10 msOver-voltage Protection: 36 VDCRelay Counter Saving: Yes

Digital OutputChannels: 6 Form A (N.O.) relay outputs, 5A Contact Rating: 5A @ 30 VDC, 5A @ 240 VAC, 5A @ 110 VACInductance Load: 2AResistance Load: 5ABreakdown Voltage: 500 VACRelay On/Off Time: 10 ms, 5 ms (Max.)Initial Insulation Resistance: 1G min. @ 500 VDCExpected Life: 100,000 times (Typical)Initial Contact Resistance: 30m ohms (Max.)Pulse Output: 20 operation times per minutes at rated loadIsolation: 3K VDC or 2K Vrms

Specifications

6 DIs supporting PNP, NPN, and Dry contact ›6 Form A relay output (Normal Open) ›Relay specification: 5A/250 VAC, 5A/30 VDC ›Instant event messaging by TCP/UDP/e-mail/SNMP trap ›DI and Relay counter saving when power off ›PC-based configuration utility and web console ›Power On default relay status setting with sequence ›Easy-to-use Click&Go™ Logic for local output control ›Windows/WinCE VB/VC and Linux C API ›I/O control over Modbus/TCP and SNMP protocol ›

IntroductionRelay Counter saving when power offThe ioLogik E2214 is designed to record the counts of the usage of the build-in relay outputs. Even encountering the sudden power fail,

the ioLogik E2214 is able to record the last counts into its internal storage before the power is fully down.

Pin Assignment

ioLogik E2214: • Active Ethernet I/O with 6 digital inputs and 6 relay outputsLDP1602:• LCD module with 16 x 2 text display and 5 buttons


I/O (left to right)1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

DI.C

OM1

DI0

DI1

DI2

GND

N.C.

DI.C

OM2

DI3

DI4

DI5

GND

N.C.

R0 N

O

R0 C

R1 N

O

R1 C

R2 N

O

R2 C

R3 N

O

R3 C

R4 N

O

R4 C

R5 N

O

R5 C

DI Group 1 DI Group 2 Relays 0 to 5

ioLogik E2214

Active Ethernet I/O with 6 digital inputs and 6 relay outputs


5

Wireless

Ethernet0

Overview

7

8

9

10

12

Peer-to-PeerI/O

Modular

Remote I/O

Media


11

4

3

2

1

6



Managed

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

E2240

Analog InputChannels: 8Resolution: 16-bitInput Range: +/-150 mV, +/-500 mV, +/-5 V, +/-10 V, 0 to 20 mA, 4 to 20 mAData Format: 16-bit integer (2’s complement)Accuracy: +/- 0.1% FSR @ 25°C, +/- 0.3% FSR @ -10 and 60°CSampling Rate (all channels): 10 samples/sec (voltage), 6 samples/sec (current)Input Impedance: 900k ohmsBuilt-in Resistor for Current Input: 106 ohmsCMR @ 50/60 Hz: 95 dB min.Zero Drift: +/- 9 μV/°C

Span Drift: +/- 25 ppm/°CIsolation: 3K VDC or 2K Vrms

Analog OutputChannels: 2Resolution: 12-bitOutput Range: 0 to 10V, 4 to 20 mADrive Voltage: 15 VDC for current outputData Format: 12 bitAccuracy: +/- 0.1% FSR @ 25°C, +/- 0.3% FSR @ -10 and 60°CZero Drift: +/- 9 μV/°CSpan Drift: +/- 25 ppm/°CLoad Resistor: < 250 ohms

Instant event messaging by TCP/UDP/e-mail/SNMP trap ›Easy-to-use Click&Go™ Logic for local output control ›8-channel analog inputs for voltage, current signal ›2-channel analog outputs for voltage, current actuator control ›PC-based configuration utility and web console ›Windows/WinCE VB/VC and Linux C API ›I/O control over Modbus/TCP and SNMP protocol ›NIST-traceable calibration ›

Specifications

Pin AssignmentI/O (left to right)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Vin0

+

Vin0

-

Vin1

+

Vin1

-

Vin2

+

Vin2

-

Vin3

+

Vin3

-

Vin4

+

Vin4

-

Vin5

+

Vin5

-

Vin6

+

Vin6

-

Vin7

+

Vin7

-

Vout

0+

Vout

0-

Iout

0+

Iout

0-

Vout

1+

Vout

1-

Iout

1+

Iout

1-

ioLogik E2240: • Active Ethernet I/O with 8 analog inputs and 2 analog outputsLDP1602: • LCD module with 16 x 2 text display and 5 buttons


Introduction

Combination of analog input and outputThe ioLogik E2240 is combination of analog input and output in one module. It supports sensors and actuators include pH, conductivity,

pressure, flow, and valves.


Active Ethernet I/O with 8 analog inputs and 2 analog outputs



6

Active Ethernet I/O

Active Ethernet I/O with 4 analog inputs and 12 configurable DIO

E2242

Analog Input Channels: 4, differential inputResolution: 16-bitI/O Mode: 4 to 20 mA, 0 to 10 VSampling Rate (all channels): 100 samples/sec Accuracy: +/- 0.1% FSR @ 25˚C, +/-0.3% FSR @ -10 and 60°CInput Impedance: 900K ohms (min.)Built-in Resistor for Current Input: 106 ohms

Configurable Digital Input/OutputChannels: 12 points

Digital InputSensor Type: NPN, PNPI/O Mode: DI or event counter (up to 900 Hz)Dry Contact: Logic 0: short to GND, Logic 0: OpenWet Contact: Logic 0: 0 to 3 VDC, Logic 1: 10 to 30 VDCCommon Type: 6 points per COM Power off Storage for Counter Mode: Yes

Digital Output Sensor Type: Sink, 45 VDC, 200 mAPulse Wave Width: 10 ms /100 Hz

4 fixed differential analog input channels ›12 configurable digital input/output channels ›Instant event messaging by TCP/UDP/e-mail/SNMP Trap ›Adjustable sampling rate ›PC-based configuration utility and web console ›Easy-to-use Click&Go™ Logic for local output control ›I/O control over Modbus/TCP and SNMP protocol ›NIST traceable calibration ›

Specifications


ioLogik E2242:• Active Ethernet I/O with 4 analog inputs and 12 configurable DIOsLDP1602:• LCD module with 16 x 2 text display and 5 buttons

IntroductionBetter I/O matrix for AI monitoringThe ioLogik E2242 is designed for AI monitoring and alarm, such as water tank monitoring. I/O combination of ioLogik E2242 provides the ability to allow one AI channel to trigger up to 3 digital outputs for “Low”, “High”, and “High, High” alarm points.

Front-end signal conditionerThe ioLogik E2242 can co-work with PLC by digital output to reduce the PLC AI operating loading. It is also a backup system of main control system by its active messaging.

Pin Assignment

I/O (left to right)1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Vin0

+

Vin0

-

Vin1

+

Vin1

-

Vin2

+

Vin2

-

Vin3

+

Vin3

-

DI.C

OM1

DIO0

DIO1

DIO2

DIO3

DIO4

DIO5

GND

GND

DIO6

DIO7

DIO8

DIO9

DIO1

0

DIO1

1

DI.C

OM2

ioLogik E2242

Preliminary


5

Wireless

Ethernet0

Overview

7

8

9

10

12

Peer-to-PeerI/O

Modular

Remote I/O

Media


11

4

3

2

1

6



Managed

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

Active Ethernet I/O with 6 RTD inputs and 4 digital outputs

E2260

RTDChannels: 6, RTD channelsInput Type: Pt, JPt, Ni, RTD sensor, resisterSampling Rate: 12 samples/sec (all channels)Resolution: 0.1˚C or 0.1 ohmAccuracy: +/- 0.1% FSR @ 25˚C, +/-0.3% FSR @ -10 and 60°CInput Impedance: 625K ohms (min.)

Digital Output Channels: 4, sink, 45 VDC, 200 mAOptical Isolation: 3K VDC or 2K VrmsPulse Out Frequency: 100 HzOver-voltage Protection: 45 VDCOver-current Limit: 750 mAOver-temperature Shutdown: 175˚C

Support PT, JPT, Ni RTD sensor types, and resistance ›Adjustable RTD sampling rate ›Instant event messaging by TCP/UDP/e-mail/SNMP trap ›PC-based configuration utility and web console ›Easy-to-use Click&Go™ Logic for local output control ›Windows/WinCE VB/VC and Linux C API ›I/O control over Modbus/TCP and SNMP protocol ›NIST traceable calibration ›

Specifications

Pin Assignment

I/O (left to right)1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

EX0

IN0+

IN0-

EX1

IN1+

IN1-

EX2

IN2+

IN2-

EX3

IN3+

IN3-

EX4

IN4+

IN4-

EX5

IN5+

IN5-

DO.G

ND

DO0

DO1

DO2

DO3

DO.P

WR

Ordering InformationioLogik E2260:• Active Ethernet I/O with 6 RTD inputs and 4 digital outputsLDP1602: • LCD module with 16 x 2 text display and 5 buttons

Introduction

Brings intelligence to temperature measurementThe ioLogik temperature I/O brings intelligence to temperature sensors. It equipped virtual channels which are available to calculate the average value of each channel and the difference between two substantial channels. And it doesn’t need any controller or PC.

Great compatibility with popular RTD temperaturesensorsThe ioLogik E2260 offers including PT100, PT1000, JPT, Ni sensor types and resistor up to 2.2K ohms. It supports you using your own resistance sensor, such as PTC, NTC for your HVAC applications.




6

Active Ethernet I/O

Active Ethernet I/O with 8 thermocouple inputs and 4 digital outputs

E2262

Thermocouple InputChannels: 8, thermocouple inputSensor Type: J, K, T, E, R, S, B, N type TC and mV modeSampling Rate (all channels): 10 samples/sec Effective Resolution: 16-bitAccuracy: +/- 0.1% FSR @ 25˚C, +/- 0.3% FSR @ -10 and 60°CInput Impedance: 1M ohms or better

Digital Output Channels: 4, sink, 45 VDC, 200 mAIsolation: 3K VDC or 2K VrmsPulse-out Frequency: 100 HzOver-voltage Protection: 45 VDCOver-current Limit: 750 mAOver-temperature Shutdown: 175˚C

Supports J, K, T, E, R, S, B, and N type thermocouple and mV ›modesAdjustable sampling rate ›Instant event messaging by TCP/UDP/e-mail/SNMP Trap ›PC-based configuration utility and web console ›Easy-to-use Click&Go™ Logic for local output control ›Windows/WinCE VB/VC and Linux C API ›I/O control over Modbus/TCP and SNMP protocol ›NIST traceable calibration ›

Specifications

Ordering InformationioLogik E2262:• Active Ethernet I/O with Ethernet with 8 thermocouple inputs and 4 digital outputsLDP1602:• LCD module with 16 x 2 text and 5 buttons

Introduction

Extending the wiring lengthThe ioLogik E2262 extends 10 times of your sensors’ wiring length. For example, 10m length of K-Type sensor is normal, the ioLogik E2262 can accept 100m K-Type TC wiring length.

Brings intelligence to temperature measurementThe ioLogik temperature I/O brings intelligence to temperature sensors. It equipped virtual channels which are available to calculate the average value of each channel and the difference between two substantial channels. And it doesn’t need any controller or PC.

I/O Pin Assignment

I/O (left to right)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

TC.G

ND0

TC0

+

TC0

-

TC1

+

TC1

-

TC2

+

TC2

-

TC3

+

TC3

-

TC4

+

TC4

-

TC.G

ND1

TC5

+

TC5

-

TC6

+

TC6

-

TC7

+

TC7

-

DO.G

ND

DO0

DO1

DO2

DO3

DO.P

WR

ioLogik E2262

Preliminary


5

Wireless

Ethernet0

Overview

7

8

9

10

12

Peer-to-PeerI/O

Modular

Remote I/O

Media


11

4

3

2

1

6



Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

Modular

EthernetSwitches

R2000 Serial Remote I/O

The ioLogik R2000 series was designed for system integrators to acquire and control remote digital and analog devices over RS-485. Types of digital on/off devices that can be controlled include proximity switches, mechanical switches, push buttons, optical sensors, LEDs, and light switches. Types of analog devices that can be controlled include pH, conductivity, temperature, humidity, pressure, flow,

actuator, and valves.

The ioLogik R2000 series can work with the standard Modbus protocol. SCADA software or the MXIO DLL library may be used to access the server.

Linking Input and Output Signals over RS-485

RS-485 is still the most common interface used by many industries, and Moxa now offers a high quality line of remote I/O that support RS-485.

Multi-functional digital I/O with DI/Event Counter and DO/Pulse •Output modesMulti-function analog I/O with mA/mV/Voltage modes•Over-current and over-voltage protection•

High-reliability I/O design that ensures accuracy and reliability during •field operationRemote management of firmware upgrades over RS-485 network•

Full Range of DI/DO and AI/AO Models

Each input signal can be independently configured, with DI/Event Counter modes available for digital inputs and voltage/current modes available for analog inputs. Each digital output can be independently configured for DO or Pulse Output mode. The analog input channels

support various signals ranging from +/-150 mV to +/-10V at 16-bit resolution. The analog output channels support 0 to 10V and 4 to 20 mA @ 12-bit resolution.

Independent Configuration of Multi-functional DI/DO and AI/AO Channels

Traditionally, it was difficult for users to update firmware over RS-485. Moxa now provides an easy method for updating firmware over an RS-485 network that allows users to perform remote firmware updates, reducing maintenance time and cost.

Easy Management of Firmware over RS-485

Traditionally, a PC was required in order to configure a remote I/O. Moxa offers the optional snap-on LCD module as an easier way to configure and monitor the ioLogik E2000, R2000, and ioMirror E3000 series.

The LCD module is hot-pluggable, so it can be installed or removed without turning the server off.

Snap-On LCD Module

Serial Remote I/O Solution Tutorial



6

Serial Rem

ote I/O

RS-485 remote I/O with 12 digital inputs and 8 digital outputs

R2110


I/O Mode: DI or Event Counter (up to 50 Hz)

Dry Contact: Logic 0: short to GND, Logic 1: open

Wet Contact: Logic 0: 0 to 3 VDC, Logic 1: 10 to 30 VDC (DI COM to DI)



Digital OutputChannels: 8, sink type, 45 VDC, 200 mA

I/O Mode: DO or Pulse Output (up to 50 Hz)

On-state Voltage: 24 VDC nominal


Optical Isolation: 3K VDC or 2K Vrms

Protection: Over-temperature shutdown: min. 175°C,

Over-current limit: typ. 400 mA/channel

Output Frequency: 50 Hz

Specifications

12-channel 24 VDC digital inputs with DI/Event Counter ›mode, software selectable filtering time8-channel 24 VDC digital outputs with pulse output mode and ›software selectable pulse widthLED indicators for all I/O channels ›Over-temperature protection (up to 175°C) ›Over-current protection (400 mA/channel) ›Easy-to-use, quick programming library for VB, VC++, BCB ›Firmware upgradable over RS-485 ›

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

DI.C

OM

DI0

DI1

DI2

DI3

DI4

DI5

DI6

DI7

DI8

DI9

DI10

DI11

DI.G

ND

DO.P

WR

DO0

DO1

DO2

DO3

DO4

DO5

DO6

DO7

DO.G

NDPin Assignment

I/O (left to right)

ioLogik R2110: • RS-485 remote I/O with 12 digital inputs and 8 digital outputsLDP1602: • LCD module with 16 x 2 text display and 5 buttons


ioLogik R2110


5

Wireless

Ethernet0

Overview

7

8

9

10

12

Peer-to-PeerI/O

Modular

Remote I/O

Media


11

4

3

2

1

6



Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches


OrderingInform

ation

Modular

EthernetSwitches

RS-485 remote I/O with 8 analog inputs and 2 analog outputs

R2140

8-channel analog inputs for millivolts (mV), voltage, current ›signal with wire-off detection (at 4 to 20 mA)2-channel analog outputs for voltage, current actuator control ›16-bit resolution analog inputs, 12-bit resolution analog output ›Easy-to-use, quick programming library for VB, VC++, BCB ›NIST-Traceability calibration for analog I/O channels ›Firmware upgradable over RS-485 ›

Analog InputChannels: 8

Resolution: 16-bit

Input Range: +/-150 mV, +/-500 mV, +/-5 V, +/-10 V, 0 to 20 mA, 4 to 20 mA

Data Format: 16-bit integer

Accuracy: +/- 0.1% FSR @ 25°C,

+/- 0.3% FSR @ -10 and 60°C

Sampling Rate (all channels): 10 samples/sec (voltage),

6 samples/sec (current)

Built-in Resistor for Current Input: 106 ohms

CMR @ 50/60 Hz: 95 dB min.

Optical Isolation: 2K VDC or 3K Vrms

Analog OutputChannels: 2

Resolution: 12-bit

Output Range: 0 to 10V, 4 to 20 mA

Drive Voltage: 15 VDC for current output

Accuracy: +/- 0.1% FSR @ 25°C,

+/- 0.3% FSR @ -10 and 60°C

Zero Drift: +/- 9 μV/°C

Span Drift: +/- 25 ppm/°C

Load Resistor: < 250 ohms

Specifications

Pin Assignment

I/O (left to right)1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Vin0

+

Vin0

-

Vin1

+

Vin1

-

Vin2

+

Vin2

-

Vin3

+

Vin3

-

Vin4

+

Vin4

-

Vin5

+

Vin5

-

Vin6

+

Vin6

-

Vin7

+

Vin7

-

Vout

0+

Vout

0-

Iout

0+

Iout

0-

Vout

1+

Vout

1-

Iout

1+

Iout

1-

ioLogik R2140:• RS-485 remote I/O with 8 analog inputs and 2 analog outputsLDP1602: • LCD module with 16 x 2 text display and 5 buttons


Serial Remote I/O ioLogik R2140



6

Active Ethernet I/O

Snap-on module for ioLogik 2000 and ioMirror 3000 series

1. Remove the ioLogik’s top cover. 2. Plug in the LCD module.

3. Check and configure the IP address. 4. Check IP and I/O status.

Hot-pluggable display module for ioLogik Active Ethernet I/O, ›serial I/O, and Peer-to-Peer I/OEasy, portable configuration kit for IP display and configuration ›Direct display for analog value and digital input, counter status ›No battery required (powered by I/O ) ›

LDP1602 LCD Module

Installing the LCD Module

SpecificationsLCD Screen: 16 x 2 text display (in English)

Operating Temperature: 0 to 55°C (32 to 131°F)



LDP1602: • LCD module with 16 x 2 text display and 5 buttons


LDP1602 LCD

Module


Peer-to-Peer I/O

ioMirror Peer-to-Peer I/O

7Solution Tutorial 7-2

ioMirror E3210 Ethernet Peer-to-Peer I/O with 8 DI, 8 DO 7-5

Peer-to-Peer I/O




7

Peer-to-Peer I/O

E3000 Peer-to-Peer I/ODirect Input-to-output Communication over an IP Network

The ioMirror E3000 Ethernet I/O is designed as a cable replacement solution that sends input signals to remote outputs over an IP network. ioMirror can be used to connect remote sensor signals to PLC

controllers, DCS systems, or display devices over a network, without installing additional signal wires.

ioMirror in Different Network Infrastructures

Solution Tutorial

#3 Wireless LAN Network

#2 Fiber Ethernet Network#1 Ethernet Network


Peer-to-Peer I/O 0

6

OverviewPeer-to-Peer I/O

Active Ethernet I/O

7

8

9

10

12

Modular

Remote I/O

Media


Ordering Inform

ation

11

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


The Easiest Way to Connect Input Signals to Remote Outputs over an IP NetworkConfiguration of ioMirror is easy using ioMirrorAdmin for Windows. With ioMirrorAdmin, input-to-output signal mapping between ioMirror can be configured from a local or remote host. “Basic Configuration,” which is also available in the web console, is used for simple mapping of all channels from Module-to-Module. “Advanced Configuration”

is used for customized Channel-to-Channel mapping and allows one input channel to be mapped to multiple output channels. ioMirrorAdmin also provides a graphical representation of ioMirror relationships complete with signal direction, making it easy to map signals quickly and accurately.

Take Advantage of Existing Ethernet InfrastructureWhy spend extra effort installing additional signal wires if you already have a high-speed Ethernet infrastructure? Modern LANs, including Ethernet, optical fiber, and wireless, already provide the necessary

high-speed connectivity. General input/output signals can be carried by a pair of ioMirror I/O, making wiring simpler than ever.

Simultaneously Send Input Signals to Two LocationsThe ioMirror E3000 can send one input signal simultaneously to two digital outputs over the network. This function could be used, for example, to monitor tank levels from two different display panels.

Easy and Flexible InstallationInstalling ioMirror E3000 is easy using the Windows utility that comes with each server. If all channels are mapped from one module to another, all you need to do is assigning the remote IP address. For

more sophisticated mapping, individual channels can be mapped quickly and easily using the comprehensive graphical user interface.

Useful Troubleshooting ToolsMany useful tools are provided that help keep you informed about the health and performance of your ioMirror E3000 and connections.

Optional LCD attachment for local IP configuration•Alarm port for 24 VDC alarm devices, such as pole displays, LEDs, •

and buzzersRemote alarm and independent event log that records each •connection and disconnection

Using ioMirror as Part of a Tank Monitoring PanelThis real-world application uses ioMirror in the vegetable oil industry, where oil tank levels are monitored constantly. The customer uses a computer-based SCADA system for general management and control, with an LED panel in the control room for direct monitoring of tank levels. The original solution was a significant challenge, since it meant maintaining 200 meters of dedicated copper wire for 24 V signals. The advantage of using the ioMirror Ethernet I/O was that the existing

fiber network could be used instead. The level sensor simply connects to an ioMirror, which is connected to the network. Sensor signals are automatically forwarded over the network to another ioMirror, which sends matching 24 VDC digital output signals directly to the LED. The ioMirror system was so easy to set up that the customer completed the project in just a few days, and at very little cost.

Solution Tutorial



7

Peer-to-Peer I/O

LANEthernet: 10/100 Mbps, RJ45

Protection: 1.5 KV magnetic isolation

Protocols: Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, HTTP, SNTP

Power RequirementsInput Voltage: 24 VDC nominal, 12 to 48 VDC

DO Power: 24 VDC nominal, up to 45 VDC

Physical CharacteristicsWiring: I/O cable max. 14 AWG

Environmental LimitsOperating Temperature: -10 to 60°C (14 to 140°F), 5 to 95% RH

Storage Temperature: -40 to 85°C (-40 to 185°F), 5 to 95% RH

Regulatory Approvals


EMS: IEC 61000-4, IEC 61000-6

Safety: UL508

Shock: IEC 60068-2-27




Common Specifications for ioMirror E3000 series


9.51

8.2545.63

5.95 24.44

79

10.98

9.5

11593.02

120.3

64.6

3.81

57.5

6.89

3.39

793.

4

44.5 35.1

Comm

on Specifications

Side View Front View Rear View


0

6

OverviewPeer-to-Peer I/O

Active Ethernet I/O

7

8

9

10

12

Modular

Remote I/O

Media


Ordering Inform

ation

11

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


E3210


I/O Mode: Digital Input

Dry Contact: Logic 0: close to GND,

Logic 1: open

Wet Contact: Logic 0: 0 to 3 VDC,

Logic 1: 10 to 30 VDC

Isolation: 2K Vrms


Digital OutputChannels: 8, sink type

I/O Mode: Digital output

On-status Voltage: 24 VDC (typical)


Optical Isolation: 2K Vrms or 3K VDC

Protection: Over-voltage Protection: 45 VDC Over-current Limit: 600 mA (typical) Over-temperature Shutdown: 160°C (min.)

Alarm Port OutputChannels: 1, sink type

On-status Voltage: 24 VDC (typical)


Optical Isolation: 2K Vrms or 3K VDC

Specifications

Direct input-to-output signal communication over IP ›High speed Peer-to-Peer I/O within 20 ms ›One physical alarm port for connectivity status ›Quick and easy utility and web-based settings ›Local alarm and remote alarm message ›Supports Modbus/TCP for remote monitoring ›Optional LCD module for simple setting ›

Introduction

Direct input-to-output communication over IPThe ioMirror E3000 Ethernet I/O is designed as a cable-replacement solution that connects remote digital input signals to output signals over an IP network. The ioMirror E3210 provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of digital input and output signals can be exchanged over Ethernet with another ioMirror E3210 as well as to a local PLC or DCS controller. Over a local area network, the ioMirror achieves low signal latency, which is typically 20 ms. With ioMirror, remote sensors can now be connected to local controllers or display panels over copper, fiber, or wireless Ethernet infrastructures. Signals can be transmitted over virtually unlimited distances, without noise problems.

Split sensor signals to sixteen different locationsThe ioMirror E3000 can split one input signal to two digital output channels at two different IP addresses. Eight tank level signals can be monitored at sixteen different display panels, all at the same time.

Local alarm with remote alarm messages for monitoring connectivityThe ioMirror E3210 has a 24 VDC alarm output channel that can activate an attached buzzer or LED display when the connection fails. In addition, both ioMirror modules can send messages to the ioEventLog software. This ensures that at least one of the warning messages will reach the ioEventLog software.

iomirror E3210

Ethernet Peer-to-Peer I/O with 8 digital inputs and 8 digital outputs

Peer-to-Peer I/O



7

Peer-to-Peer I/O

Digital Output

DO

.PW

R

DO

0

DO

1

DO

2

DO

3

DO

4

DO

5

DO

7

DO

6

DO

.GN

D

-+

I/O Pin Assignment

Wiring Example

I/O (left to right)

Alarm Port

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

DI.C

OM

DI0

DI1

DI2

DI3

DI4

DI5

DI6

DI7

DI.G

ND

Alar

m

DO.P

WR

DO0

DO1

DO2

DO3

DO4

DO5

DO6

DO7

DO.G

ND

Digital Input (Dry Contact)

Digital Input (Wet Contact with NPN Sensor)

DI6

DI5

DI4

DI3

DI2

DI0

DI.C

OM

DI.G

ND

ALA

RM

GN

D

+-

ioMirror E3210: • Ethernet Peer-to-Peer I/O with 8 digital inputs and 8 digital outputsLDP1602: • LCD module with 16 x 2 text display and 5 buttons


+ -

Pin1

Brown12 to 24 V

12~24 VNPN output

0V

Black

Blue

NPN Sensors

DI.C

OM

DI5

DI6

DI7

DI4

DI3

DI2

DI1

DI0

DI.C

OM

ioMirror E3210


NA-4010 Ethernet network adaptor 8-7

NA-4020/4021 RS-485 or RS-232 network adaptors 8-8

M-1000 Digital input modules 8-9

M-2000 Digital output modules 8-12

M-3000 Analog input modules 8-16

M-6000 Temperature input modules 8-18

M-4000 Analog output modules 8-19

M-7000 Power modules 8-20

Accessories 8-22

Modular Remote I/O

Modular Remote I/O

8




8

Modular Rem

ote I/O

Custom SoftwareMXIO Library

WiFi

SCADA

Ethernet Switch

Wireless Serial Device Server

E2210E2212DI/DO

E2240AI/AO

E2242Mix I/O

E2260E2262RTD/TC

E2214RelayOutput

Fiber Optic Cable (100BaseFX)Twisted Pair Cable (10/100BaseT(X) or 10/100/1000BaseT(X))RS-485/RS-232 Cable

NA-4020RS-485 Modular I/O

ioMirror ioMirror

Embedded Computer

Analog Input Modules M-3400 Series

Temperature Input ModulesM-6200 Series

Digital Input ModulesM-1400/1800/1600 Series

Digital Output ModulesM-2400/2800/2600 Series

Analog Output Modules M-4200 Series

Turbo Ring

Discrete I/O

Analog I/O

Temperature sensor

ActuatorRelayAlarmOn/off deviceHigh/LowOpen/Close

PressureHumidty sensorFlow sensorDrive/ValveHigh/LowOpen/Close

NA-4021 RS-232 Modular I/O

NA-4010 Ethernet Modular I/O

High Density, Slice Form Factor Remote I/OCreate a Compact, Flexible I/O Solution

Solution Tutorial


0

8

7

OverviewM

odular Remote I/O

Peer-to-PeerI/O

9

10

12

Media


Ordering Inform

ation

11

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


Flexible remote I/O solution with various I/O module 4000 Modular Remote I/OHigh Density, Slice Form Factor Remote I/O

Slice Type I/O Modules Removable Terminal Block Module Coding TagSpring Type Terminal Block

The ioLogik 4000 provides spring type, removable terminal blocks (RTB) that allow you to preserve field wiring before replacing any I/O

Hassle-free Installation and Management

expansion modules. Each I/O expansion module can be quickly and easily replaced.

Solution TutorialModular Remote I/O

Easy Installation and Maintenance



8

Modular Rem

ote I/O

The ioAdmin allows you to configure and monitor ioLogik 4000 modular I/O remotely. ioAdmin automatically detects the installed ioLogik Ethernet I/O and presents the installation sequence of the modular I/O modules. ioAdmin also detects and generates a Modbus address table, which can be printed or stored on a computer for SCADA software configuration.

The utility also allows you to:

1. Automatically search for installations

2. Look for help using online documentation

3. Generate reports of I/O combinations

What You See Is What You Install!!

The ioAdmin is a powerful, Windows-based configuration and management tool. You can use ioAdmin to modify the IP address, update communication parameters, and configure all other settings easily. In addition, ioAdmin can be used to configure ioLogik modular I/O from a remote host. This means that ioLogik modular I/O may be configured from anywhere over the Ethernet, which can help reduce your operating expense.

The M-2402, M-2403, M-2404, and M-2405 modules include a self-diagnostic function to guarantee that the digital output signal is monitored electronically. The hardware-monitored status is written to

the logic system, and you can obtain the actual digital output status over the network when the software sends a command to the module. This is all done internally, and configuration is not required.

Although ioAdmin is the main configuration interface for ioLogik, you can also check the following information using the ioLogik’s web console:

• Network configuration

• Modular I/O

• Status of each channel

Solution Tutorial

Easy-to-Use Windows Utility

Self-diagnostic Function for Digital Output Channels

Check Remote I/O Status with a Web Browser

Remote Configuration


0

8

7

OverviewM

odular Remote I/O

Peer-to-PeerI/O

9

10

12

Media


Ordering Inform

ation

11

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches



Dimensions for ioLogik 4000 Modular Remote I/O

Modular Remote I/O

SCADA DAQ Software

SCADA SoftPLC

OPC Client

Modbus SpecificDriver

3rd PartyOPC Server

Visual BasicC-Applications

Programming ToolsProgramming Tools

MXIO DLL

Utility & DiagnosticsUtility & Diagnostics

ioAdminWindows Utility

RS-232/485 Ethernet

Host ComputerHost Computer

SCADA Software PackagesSCADA Software Packages

Modbus/TCPModbus/RTU

I/O ModuleI/O Network Adaptor

Modular Remote I/O

The ioLogik 4000 supports the standard Modbus protocol and is compatible with most SCADA software. In addition, Moxa provides an easy-to-use MXIO DLL library that helps programmers develop application software with Visual Basic or C language under Windows.

The ioLogik 4000 line was designed for the standard Modbus protocol and can be used with most SCADA systems. The following SCADA software has been found to be compatible with ioLogik 4000: Modicon Driver, Wonderware Intouch, GE Fanuc iFix and CIMPLICITY, Broadwin, kingview, and Citect. In addition, we successfully tested the OPC Server “Kepware,” which means that ioLogik 4000 may be accessed either from a SCADA system or through an OPC Server.

Note: The installation guides for different SCADA software packages can be downloaded from Moxa’s download center.

Side View Front View Removable ViewSide View Front View

15

99

30

70

12 70

35

99

60

30

36 28

70

99

36 35

28

60

70 42

99

36 35

28

99

60

Solution TutorialModular Remote I/O

Versatile Software Support

Supports Various SCADA Software Packages



8

Modular Rem

ote I/O

Digital Inputs

Specs

Model M-1400 M-1401 M-1410 M-1411 M-1800 M-1801 M-1600 M-1601 M-1450 M-1451

Channels 4 4 4 4 8 8 16 16 4 4

Sink/Source Sink Source Sink Source Sink Source Sink Source – –

Connector RTB RTB RTB RTB RTB RTB 20-pin 20-pin RTB RTB

Voltage 24 VDC 24 VDC 48 VDC 48 VDC 24 VDC 24 VDC 24 VDC 24 VDC 110 VAC 220 VAC

Isolation Optical isolation

Digital Outputs

Specs

Model M-2400 M-2401 M-2800 M-2801 M-2600 M-2601 M-2402 M-2403 M-2404 M-2405 M-2250 M-2254

Channels 4 4 8 8 16 16 4 4 4 4 2 2

Sink/Source Sink Source Sink Source Sink Source Sink Source Sink Source Relay Triac

Connector RTB RTB RTB RTB 20-pin 20-pin RTB RTB RTB RTB RTB RTB

Voltage 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 230 VAC/ 24 VDC

12 to 125 VAC

Current 0.5A 0.5A 0.5A 0.5A 0.3A 0.3A 0.5A 0.5A 2.0A 2.0A 2.0A 0.5A


Diagnostics – – – – – – Yes Yes Yes Yes – –

Analog Inputs

Specs


Channels 4 4 4 4 4 4 4 4 4 4 2 2

Current 0 to 20 mA

4 to 20 mA – – – 0 to 20

mA4 to 20

mA – – – – –

Voltage – – 0 to 10V -10 to 10V 0 to 5V – – 0 to 10V -10 to

10V 0 to 5V – –

Connector RTB RTB RTB RTB RTB RTB RTB RTB RTB RTB RTB RTB

Resolution 12-bit 12-bit 12-bit 12-bit 12-bit 14-bit 14-bit 14-bit 14-bit 14-bit – –


Sensor Input – – – – – – – – – – RTD

(ohm)

Thermo- couple(mV)

Analog Outputs

Specs

Model M-4201 M-4202 M-4210 M-4211 M-4212

Channels 2 2 2 2 2

Current 0 to 20 mA 4 to 20 mA – – –

Voltage – – 0 to 10V -10 to 10V 0 to 5V

Connector RTB RTB RTB RTB RTB

Resolution 12-bit 12-bit 12-bit 12-bit 12-bit


Modular Remote I/O Selection Guide

Selection Guide

I/O Modules

Power Modules

Power Modules

Specs

Model M-7001 M-7002 M-7803 M-7804 M-7805 M-7806

Channels 0 0 8 8 8 8

Voltage 24 VDC DC: 5, 24, 48 VDCAC: 110/220 VAC - 0 VDC 24 VDC 4-ch for 0 VDC

4-ch for 24 VDC

Purpose System Power Field Power Shield Signal Field Power Field Power Field Power


0

8

7

OverviewM

odular Remote I/O

Peer-to-PeerI/O

9

10

12

Media


Ordering Inform

ation

11

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


Ethernet network adaptor

NA-4010Modular Remote I/O

NA-4010

0 1

2 3

4 5

6 7

CH0 CH0

CH0 CH0

CH0 CH0

CH0 CH0

ioLogik 4000Modbus TCP/IPNA-4010

SYSLINKACTIVEI/O

FieldPower

0 1

2 3

4 5

6 7

SG

Field Power (0 VDC)Field Power (24 VDC)

SG

24V 0V

0V 0V

24V 24V

System Power (0 VDC)


Field Power (0 VDC)

Field Power (24 VDC)

Shielding Ground

System Power (5 VDC)System Power (GND)

System Bus

Non-isolationSwitchingPower

Specifications

NetworkEthernet: 10/100 Mbps, RJ45

Software Features Protocols: Modbus/TCP, HTTP, BootpIP Settings: ARP, Bootp, static IPUtility: ioAdminProgramming Library: MXIO DLL library for Windows supporting Visual Basic, Visual C++, Borland C++ BuilderNumber of I/O Modules support: Max. of 32 I/O expansion modules

Power Requirements Power Input: 11 to 28.8 VDC, 24 VDC typicalPower Consumption: 60 mA typical @ 24 VDCCurrent for I/O Modules: Max. 1.5A @ 5 VDC

Field Power Rated Voltage: 11 to 28.8 VDC, 24 VDC typicalCurrent in Field Power Contact: Max. 10A

IsolationSystem Power to I/O Driver: Optical isolation

Environmental LimitsOperating Temperature: -20 to 60°C, 5 to 90%RHStorage Temperature: -45 to 85°CVibration: IEC-68-2-6, 2G in operation

Physical CharacteristicsDimensions (W x H x D): 42 x 99 x 70 mm (1.65 x 3.9 x 2.75 in.) Weight: 150 g

Regulatory ApprovalsSafety: UL508EMC: CE IEC 61000-6-2, IEC 61000-6-4


NA-4000 series M-1000/2000/3000/4000/6000 series M-7000 series

Step 1: Select a network adaptor module Step 2: Select I/O modules Step 3: Select power modules (optional)

NA-4010: Ethernet network adaptor (Modbus/TCP)

*The NA-4010 Ethernet network adaptor is expandable with up to 32 I/O modules. Please refer to Page 8-9 to 8-19 to select the M- series modules that you need for your own application.



8

Modular Rem

ote I/O

RS-485 or RS-232 network adaptors

NA-4020/4021

SpecificationsSerial CommunicationBaudrate: 1200 to 115200 bpsData Bits: 7, 8Parity Bits: None, Even, OddStop Bits: 1, 2Signal: NA-4020: Data+, Data-, Gnd, DIR NA-4021: TxD, RxD, Gnd

Software FeaturesProtocols: Modbus/RTU, Modbus/ASCIIModbus Address: 00 to 99 by rotary switchesUtility: ioAdminProgramming Library: MXIO DLL library for Windows supporting Visual Basic, Visual C++, Borland C++ BuilderNumber of I/O Modules support: Max. of 32 I/O expansion modules

Power RequirementsPower Input: 11 to 28.8 VDC, 24 VDC typicalPower Consumption: 70 mA typical @ 24 VDC

Current for I/O Modules: Max. 1.5A @ 5 VDC

Field PowerRated Voltage: 11 to 28.8 VDC, 24 VDC typicalCurrent in Field Power Contact: Max. 10A

IsolationSystem Power to I/O Driver: Optical isolation

Environmental LimitsOperating Temperature: -20 to 60°C, 5 to 90%RHStorage Temperature: -45 to 85°CVibration: IEC-68-2-6, 2G in operation

Physical Characteristics Dimensions (W x H x D): 42 x 99 x 70 mm (1.65 x 3.9 x 2.75 in.) Weight: 150 g

Regulatory ApprovalsSafety: UL508EMC: CE IEC 61000-6-2, IEC 61000-6-4


0 1

2 3

4 5

6 7

CH0

CH0

CH0 CH0

ioLogik 4000Modbus RS-485NA-4020

SYSTxDRxDI/O

FieldPower

0 1

2 3

4 5

6 7

SG


SG

24V 0V

0V 0V

24V 24V



Field Power (0 VDC)

Field Power (24 VDC)

Shielding Ground


System Bus


NA-4000 series M-1000/2000/3000/4000/6000 series M-7000 series

Step 1: Select a network adaptor module Step 2: Select I/O modules Step 3: Select power modules (optional)

NA-4020: RS-485 network adaptor (Modbus)NA-4021: RS-232 network adaptor (Modbus)*The NA-4020/4021 RS-485/RS-232 adaptors are expandable with up to 32 I/O modules. Please refer to Page 8-9 to 8-19 to select the M- series modules that you need for

your own application.

NA-4020/4021


0

8

7

OverviewM

odular Remote I/O

Peer-to-PeerI/O

9

10

12

Media


Ordering Inform

ation

11

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


M-1800 8 digital inputs, sink, 24 VDCInputs per Module: 8 channels, sink typeOn-state Voltage: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCMin. Off-state Voltage: Max. 5 VDCOn-state Current: Max. 6 mA/point @ 28.8 VDCInput Impedance: Typ. 5.1K ohmsFiltering Time: Typ. 1.5 msCommon Type: External commonPower Consumption: Max. 35 mA @ 5 VDC

M-1401 4 digital inputs, source, 24 VDCInputs per Module: 4 channels, source typeOn-state Voltage: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCMin. Off-state Voltage: Max. 5 VDCOn-state Current: Max. 6 mA/point @ 28.8 VDCInput Impedance: Typ. 5.1K ohmsFiltering Time: Typ. 1.5 msCommon Type: 4 channels/2 COMPower Consumption: Max. 35 mA @ 5 VDC

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

0V 0V

24V 24V

0 1

2 3


System Bus


M-1400

Status

0

1

23

M-1400 4 digital inputs, sink, 24 VDCInputs per Module: 4 channels, sink typeOn-state Voltage: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCMin. Off-state Voltage: Max. 5 VDCOn-state Current: Max. 6 mA/point @ 28.8 VDCInput Impedance: Typ. 5.1K ohmsFiltering Time: Typ. 1.5 msCommon Type: 4 channels/2 COMPower Consumption: Max. 35 mA @ 5 VDC

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

0V 0V

24V 24V

0 1

2 3


System Bus


M-1401

Status

0

1

23

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

CH4 CH5

CH6 CH7

0 1

2 3


System Bus



M-1800

Status

0

1

23

4

5

6

7

Digital Input Modules4- or 8-channel 24 VDC digital input modules

M-1801 8 digital inputs, source, 24 VDCInputs per Module: 8 channels, source typeOn-state Voltage: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCMin. Off-state Voltage: Max. 5 VDCOn-state Current: Max. 6 mA/point @ 28.8 VDCInput Impedance: Typ. 5.1K ohmsFiltering Time: Typ 1.5 msCommon Type: External commonPower Consumption: Max. 35 mA @ 5 VDC

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

CH4 CH5

CH6 CH7

0 1

2 3


System Bus



M-1801

Status

0

1

23

4

5

6

7

Digital Input ModulesModular Remote I/O



8

Modular Rem

ote I/O

M-1411 4 digital inputs, source, 48 VDCInputs per Module: 4 channels, source typeOn-state Voltage: 48 VDC nominal, min. 34 VDC to max. 60 VDCMin. Off-state Voltage: Max. 10 VDCOn-state Current: Max. 4 mA/point @ 48 VDCInput Impedance: Typ. 12K ohmsCommon Type: 4 channels/2 COMPower Consumption: Max. 35 mA @ 5 VDC

M-1410 4 digital inputs, sink, 48 VDCInputs per Module: 4 channels, sink typeOn-state Voltage: 48 VDC nominal, min. 34 VDC to max. 60 VDCMin. Off-state Voltage: Max. 10 VDCOn-state Current: Max. 4 mA/point @ 48 VDCInput Impedance: Typ. 12K ohmsCommon Type: 4 channels/2 COMPower Consumption: Max. 35 mA @ 5 VDC

16-channel 24 VDC digital input modules

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

0V 0V

48V 48V

0 1

2 3


System Bus


* Field Power distributor required.

M-1410

Status

0

1

23

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

0V 0V

48V 48V

0 1

2 3


System Bus



M-1411

Status

0

1

23

M-1600 16 digital inputs, sink, 24 VDC Inputs per Module: 16 channels, sink typeOn-state Voltage: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCMin. Off-state Voltage: Max. 5 VDCOn-state Current: Max. 6 mA/point @ 28.8 VDCInput Impedance: Typ. 5.1K ohmsFiltering Time: Typ. 1.5 msCommon Type: 16 channels/2 COM Power Consumption: Max. 40 mA @ 5 VDC

M-1601 16 digital inputs, source, 24 VDCInputs per Module: 16 channels, source typeOn-state Voltage: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCMin. Off-state Voltage: Max. 5 VDCOn-state Current: Max. 6 mA/point @ 28.8 VDCInput Impedance: Typ. 5.1K ohmsFiltering Time: Typ. 1.5 msCommon Type: 16 channels/2 COM Power Consumption: Max. 40 mA @ 5 VDC

24V24V

0V0V

1514

1312

1110

98

76

54

32

1Ch0

0 1

18 19


System Bus


M-1600

Status

3 71115

2 61014

1 5 9 13

0 4 8 12

24V24V

0V0V

1514

1312

1110

98

76

54

32

1Ch0

0 1

18 19


System Bus


M-1601

Status

3 71115

2 61014

1 5 9 13

0 4 8 12

4-channel 48 VDC digital input modules

Digital Input M

odules


0

8

7

OverviewM

odular Remote I/O

Peer-to-PeerI/O

9

10

12

Media


Ordering Inform

ation

11

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


4-channel 110/220 VAC digital input modules

M-1451 4 digital inputs, 220 VACInputs per Module: 4 channelsOn-state Voltage: 240 VAC nominal, min. 170 VAC to max. 264 VACMin. Off-state Voltage: Max. 45 VACOn-state Current: Max. 12 mA/point @ 264 VACInput Impedance: Typ. 22K ohmsCommon Type: 4 channels/2 COM (single common)Power Consumption: Max. 35 mA @ 5 VDC

M-1450 4 digital inputs, 110 VACInputs per Module: 4 channelsOn-state Voltage: 120 VAC nominal, min. 85 VAC to max. 132 VACMin. Off-state Voltage: Max. 45 VACOn-state Current: Max. 8 mA/point @ 132 VACInput Impedance: Typ. 11K ohmsCommon Type: 4 channels/2 COM (single common)Power Consumption: Max. 35 mA @ 5 VDC

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

N N

L L

0 1

2 3


System Bus

Field Power (110 VAC N)Field Power (110 VAC L)


M-1450

Status

0

1

23

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

N N

L L

0 1

2 3


System Bus



Field Power (220 VAC)

M-1451

Status

0

1

23


Digital Input Modules

Specs

Model M-1400 M-1401 M-1410 M-1411 M-1800 M-1801 M-1600 M-1601 M-1450 M-1451

Channels 4 4 4 4 8 8 16 16 4 4

Sink/Source Sink Source Sink Source Sink Source Sink Source – –

Connector RTB RTB RTB RTB RTB RTB 20-pin 20-pin RTB RTB

Voltage 24 VDC 24 VDC 48 VDC 48 VDC 24 VDC 24 VDC 24 VDC 24 VDC 110 VAC 220 VAC


Digital Input ModulesModular Remote I/O



8

Modular Rem

ote I/O

M-2400 4 digital outputs, sink, 24 VDC, 0.5AOutputs per Module: 4 channels, sink typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.5A per channel Common Type: 4 channels/4 COM (single common)Power Consumption: Max. 45 mA @ 5 VDC

Digital Output Modules

4- or 8-channel 24 VDC digital output modules


System Bus


L

L

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

24V

24V 24V

0 1

2 3

24V

M-2400

Status

0

1

23

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

0V 0V

0 1

2 3


System Bus


L

L

0V 0V

M-2401

Status

0

1

23

M-2401 4 digital outputs, source, 24 VDC, 0.5AOutputs per Module: 4 channels, source typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.5A per channel Common Type: 4 channels/4 COM (single common)Power Consumption: Max. 45 mA @ 5 VDC

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

CH4 CH5

CH6 CH7

0 1

2 3


System Bus



L

L

L

L

M-2800

Status

0

1

23

4

5

6

7

M-2800 8 digital outputs, sink, 24 VDC, 0.5AOutputs per Module: 8 channels, sink typeOutput Voltage Range: 24 VDC nominal, min.11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.5A per channel Common Type: 8 channels/external common (single common)Power Consumption: Max. 60 mA @ 5 VDC

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

CH4 CH5

CH6 CH7

0 1

2 3


System Bus



L

L

L

L

M-2801

Status

0

1

23

4

5

6

7

M-2801 8 digital outputs, source, 24 VDC, 0.5AOutputs per Module: 8 channels, source typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.5A per channel Common Type: 8 channels/external common (single common)Power Consumption: Max. 60 mA @ 5 VDC

Digital O

utput Modules


0

8

7

OverviewM

odular Remote I/O

Peer-to-PeerI/O

9

10

12

Media


Ordering Inform

ation

11

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


M-2403 4 digital outputs, diagnostics, source, 24 VDC, 0.5AOutputs per Module: 4 channels, source typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.5A per channel Common Type: 4 channels/4 COM (single common)Self Diagnostics: YesPower Consumption: Max. 45 mA @ 5 VDC

M-2402 4 digital outputs, diagnostics, sink, 24 VDC, 0.5AOutputs per Module: 4 channels, sink typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.5A per channel Common Type: 4 channels/4 COM (single common)Self Diagnostics: YesPower Consumption: Max. 45 mA @ 5 VDC

4-channel digital output modules with diagnostics


System Bus


L

L

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

24V

24V 24V

0 1

2 3

24V

M-2402

Status

0

1

23

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

0V 0V

0 1

2 3


System Bus


L

L

0V 0V

M-2403

Status

0

1

23

M-2405 4 digital outputs, diagnostics, source, 24 VDC, 2AOutputs per Module: 4 channels, source typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 2A per channel Common Type: 4 channels/4 COM (single common)Self Diagnostics: YesPower Consumption: Max. 45 mA @ 5 VDC

M-2404 4 digital outputs, diagnostics, sink, 24 VDC, 2AOutputs per Module: 4 channels, sink typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 2A per channel Common Type: 4 channels/4 COM (single common)Self Diagnostics: YesPower Consumption: Max. 45 mA @ 5 VDC


System Bus


L

L

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

24V

24V 24V

0 1

2 3

24V

M-2404

Status

0

1

23

0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

0V 0V

0 1

2 3


System Bus


L

L

0V 0V

M-2405

Status

0

1

23

Digital Output ModulesModular Remote I/O



8

Modular Rem

ote I/O

M-2600 16 digital outputs, sink, 24 VDC, 0.3AOutputs per Module: 16 channels, sink typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.3A per channel

Max. 4A per commonCommon Type: 16 channels/2 COM (single common)Power Consumption: Max. 80 mA @ 5 VDC

16-channel digital output modules

24V24V

0V0V

1514

1312

1110

98

76

54

32

1Ch0

0 1

18 19


System Bus


L

L

LLLLLL

M-2600

Status

3 71115

2 61014

1 5 9 13

0 4 8 12

24V24V

0V0V

1514

1312

1110

98

76

54

32

1Ch0

0 1

18 19

System Power (5 VDC) System Power (GND)

System Bus

Field Power (0 VDC) Field Power (24 VDC)

L

L

LLLLLL

M-2601

Status

7111561014

1 5 9 13

0 4 8 12

M-2601 16 digital outputs, source, 24 VDC, 0.3AOutputs per Module: 16 channels, source typeOutput Voltage Range: 24 VDC nominal, min. 11 VDC to max. 28.8 VDCOn-state Voltage Drop: Max. 0.3 VDC @ 25°COn-state Current: Min. 1 mA per channelOff Leakage Current: Max. 50 µAOutput Current Rating: Max. 0.3A per channel

Max. 4A per commonCommon Type: 16 channels/2 COM (single common)Power Consumption: Max. 80 mA @ 5 VDC

Digital O

utput Modules


0

8

7

OverviewM

odular Remote I/O

Peer-to-PeerI/O

9

10

12

Media


Ordering Inform

ation

11

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


0 1

2 3

4 5

6 7

CH0 CH1

Ch0 Ch1

L1 L1

L2 L2

0 1

2 3


System Bus

Field Power (N or 0 VDC)Field Power (230 VAC or 24 VDC)

* Field Power distributor required when the field power is not 24 VDC.

L

L

COM(to N or 0 VDC)

M-2250

Status

0

1

0 1

2 3

4 5

6 7

CH0 CH1

NC NC

N N

L L

0 1

2 3


System Bus


* Field Power distributor required when the field power is not 24 VDC.

L

L

to 125 VAC

M-2254

Status

0

1

NC: No Connection

2-channel relay output modules

M-2254 2 digital outputs, triac, 12 to 125 VAC, 0.5AOutputs per Module: 2 channelsSwitch Type: Zero crossingRated Load Voltage: 15 to 132 VACOutput Current Rating: 0.05 to 0.5AFrequency Range: 47 to 63 HzSurge Current: 40A (16 ms)/4A (30S)On-state Voltage Drop: 1.3 Vrms (max. load)Off-state Leakage Current: Max. 1.5 mACommon Type: 2 channels/2 COMPower Consumption: Max. 35 mA @ 5 VDC

M-2250 2 digital outputs, relay, 24 VDC/230 VAC, 2AOutputs per Module: 2 channels, relay Relay Type: Form A, Normally Open (N.O.) Single Pole, Single Throw (SPST)Output Voltage Range: Load dependent 5 to 28.8 VDC @ 2A resistive 48 VDC @ 0.8A resistive 110 VAC @ 0.3A resistive 250 VAC @ 2A resistiveOutput Current Rating: At rated power 2A @ 5 to 28.8 VDC 0.8A @ 48 VDC 0.5A @ 110 VAC 2A @ 250 VACMin. Load: 100 µA, 100 m VDC per pointMax. On-state Voltage Drop: 0.5V @ 2A, resistive load, 24 VDCOff-state Leakage Current: Max. 1.5 mACommon Type: 1 channel/1 COMPower Consumption: Max. 65 mA @ 5 VDC



Specs


Channels 4 4 8 8 16 16 4 4 4 4 2 2

Sink/Source Sink Source Sink Source Sink Source Sink Source Sink Source Relay Triac

Connector RTB RTB RTB RTB 20-pin 20-pin RTB RTB RTB RTB RTB RTB

Voltage 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 24 VDC 230 VAC/ 24 VDC

12 to 125 VAC

Current 0.5A 0.5A 0.5A 0.5A 0.3A 0.3A 0.5A 0.5A 2.0A 2.0A 2.0A 0.5A


Diagnostics – – – – – – Yes Yes Yes Yes – –

Digital Output ModulesModular Remote I/O



8

Modular Rem

ote I/O

M-3410 4 analog inputs, 0 to 10V, 12-bitM-3412 4 analog inputs, -10 to 10V, 12-bitM-3414 4 analog inputs, 0 to 5V, 12-bitInput SpecificationsResolution in Ranges: 12-bit, 2.44 mV/bit (M-3410) 12-bit, 4.88 mV/bit (M-3412) 12-bit, 1.22 mV/bit (M-3414)Input Current Range: 0 to 10 VDC (M-3410) -10 to 10 VDC (M-3412) 0 to 5 VDC (M-3414)Data Format: 16-bit integer (2’s complement)Accuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°CInput Impedance: 500K ohmsConversion Time: 4 ms/all channels

General SpecificationsPower Consumption: Max. 150 mA @ 5 VDCIsolation: I/O to logic: Photocoupler isolationWiring: I/O cable max. AWG14

M-3400 4 analog inputs, 0 to 20 mA, 12-bitM-3402 4 analog inputs, 4 to 20 mA, 12-bitInput SpecificationsResolution in Ranges: 12-bit, 4.88 µA/bit (M-3400) 12-bit, 3.91 µA/bit (M-3402)Input Current Range: 0 to 20 mA (M-3400) 4 to 20 mA (M-3402)Data Format: 16-bit integer (2’s complement)Accuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°CInput Impedance: 120 ohmsConversion Time: 4 ms/all channels


Analog Input Modules4-channel analog input modules, 12-bit resolution


System Bus


0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

G

CG CG

0 1

2 3

G

Voltage 0 to 10V (M-3410/3411)Voltage -10 to 10V (M-3412/3413)Voltage 0 to 5V (M-3414/3415)

Shielding Ground

M-34xx

Status

0

1

23


System Bus


0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

G

CG CG

0 1

2 3

G

Current 0 to 20mA (M-3400/3401)

Shielding Ground

Current 4 to 20mA (M-3402/3403)

M-34xx

Status

0

1

23

Analog Input Modules


0

8

7

OverviewM

odular Remote I/O

Peer-to-PeerI/O

9

10

12

Media


Ordering Inform

ation

11

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


M-3411 4 analog inputs, 0 to 10V, 14-bitM-3413 4 analog inputs, -10 to 10V, 14-bitM-3415 4 analog inputs, 0 to 5V, 14-bitInput SpecificationsResolution in Ranges: 14-bit, 0.61 mV/bit (M-3411) 14-bit, 1.22 mV/bit (M-3413) 14-bit, 0.31 mV/bit (M-3415)Input Current Range: 0 to 10 VDC (M-3411) -10 to 10 VDC (M-3413) 0 to 5 VDC (M-3415)Data Format: 16-bit integer (2’s complement)Accuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°CInput Impedance: 500K ohmsConversion Time: 4 ms/all channels


M-3401 4 analog inputs, 0 to 20 mA, 14-bitM-3403 4 analog inputs, 4 to 20 mA, 14-bitInput SpecificationsResolution in Ranges: 14-bit, 1.22 µA/bit (M-3401) 14-bit, 0.98 µA/bit (M-3403)Input Current Range: 0 to 20 mA (M-3401) 4 to 20 mA (M-3403)Data Format: 16-bit integer (2’s complement)Accuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°CInput Impedance: 120 ohmsConversion Time: 4 ms/all channels


4-channel analog input modules, 14-bit resolution


System Bus


0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

G

CG CG

0 1

2 3

G

Voltage 0 to 10V (M-3410/3411)Voltage -10 to 10V (M-3412/3413)Voltage 0 to 5V (M-3414/3415)

Shielding Ground

M-34xx

Status

0

1

23


System Bus


0 1

2 3

4 5

6 7

CH0 CH1

CH2 CH3

G

CG CG

0 1

2 3

G

Current 0 to 20mA (M-3400/3401)

Shielding Ground

Current 4 to 20mA (M-3402/3403)

M-34xx

Status

0

1

23

Analog Input ModulesModular Remote I/O



8

Modular Rem

ote I/O

Temperature Input Modules

2-channel temperature input modules, RTD or thermocouple input

M-6200 2 analog inputs, RTD: PT100, JPT100Input SpecificationsSensor Types: PT50, PT100, PT200, PT500, PT1000, JPT100, JPT200, JPT500, JPT1000, NI100, NI200, NI500, NI1000, NI120, CU10, Resistance 100 milli-ohm/bit, Resistance 10 milli-ohm/bit, Resistance 20 milli-ohm/bitData Format: 16-bit integer (2’s complement)Resolution: 0.1°C/10 milli-ohmAccuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°CInput Impedance: 500K ohmsConversion Time: 200 ms/all channelsDiagnostics: Range over (if range over, data=Dx8000)



System Bus


0 1

2 3

4 5

6 7

CH0 CH1

CH0 CH1

G

CG CG

0 1

2 3

G

RTD

Shielding Ground

CH1-A

CH1-B

M-6200

Status

0

1

M-6201 2 analog inputs, thermocoupleInput SpecificationsSensor Types: Type J/K/T/E/R/S/B/N/L/U/C/D mV input 10 µV/bit, 2 µV/bitData Format: 16-bit integer (2’s compliment)Resolution: 0.1°C/10µVAccuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°CInput Impedance: 500K ohmsConversion time: 200 ms/all channelsDiagnostics: Range over (if range over, data=Dx8000)



System Bus


0 1

2 3

4 5

6 7

CH0 CH1

CH0 CH1

G

CG CG

0 1

2 3

G

Voltage 0 to 10V

Shielding Ground

CH1+

CH1-

Thermocouple

M-6201

Status

0

1


Temperature Input M

odules


Specs


Channels 4 4 4 4 4 4 4 4 4 4 2 2

Current 0 to 20 mA 4 to 20 mA – – – 0 to 20 mA 4 to 20 mA – – – – –

Voltage – – 0 to 10V -10 to 10V 0 to 5V – – 0 to 10V -10 to 10V 0 to 5V – –

Connector RTB RTB RTB RTB RTB RTB RTB RTB RTB RTB RTB RTB

Resolution 12-bit 12-bit 12-bit 12-bit 12-bit 14-bit 14-bit 14-bit 14-bit 14-bit – –


Sensor Input – – – – – – – – – – RTD

(ohm)

Thermo- couple(mV)


0

8

7

OverviewM

odular Remote I/O

Peer-to-PeerI/O

9

10

12

Media


Ordering Inform

ation

11

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches



System Bus


0 1

2 3

4 5

6 7

CH0 CH1

NC NC

G

CG CG

0 1

2 3

G

Voltage 0 to 10V (M-4210) Voltage -10 to 10V (M-4211) Voltage 0 to 5V (M-4212)

Shielding Ground

R > 5K ohms

M-421x

Status

0

1


System Bus


0 1

2 3

4 5

6 7

CH0 CH1

NC NC

G

CG CG

0 1

2 3

G

Current 0 to 20mA (M-4201)Current 4 to 20mA (M-4202)

Shielding Ground

R<500 ohms

M-420x

Status

0

1

M-4210 2 analog outputs, 0 to 10V, 12-bitM-4211 2 analog outputs, -10 to 10V, 12-bitM-4212 2 analog outputs, 0 to 5V, 12-bitOutput SpecificationsResolution in Ranges: 12-bit, 2.44 mV/bit (M-4210) 12-bit, 4.88 mV/bit (M-4211) 12-bit, 1.22 mV/bit (M-4212)Output Current Range: 0 to 10 VDC (M-4210) -10 to 10 VDC (M-4211) 0 to 5 VDC (M-4212)Data Format: 16-bit integer (2’s complement)Accuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°COutput Impedance: Min. 5K ohmsConversion Time: 2 ms/all channelPower Consumption: Max. 200 mA @ 5 VDCIsolation: I/O to logic: Photocoupler isolationWiring: I/O cable max. AWG14

M-4201 2 analog outputs, 0 to 20 mA, 12-bitM-4202 2 analog outputs, 4 to 20 mA, 12-bitOutput SpecificationsResolution in Ranges: 12-bit, 4.88 µA/bit (M-4201) 12-bit, 3.91 µA/bit (M-4202)Output Current Range: 0 to 20 mA (M-4201) 4 to 20 mA (M-4202)Data Format: 16-bit integer (2’s complement)Accuracy: +/- 0.1%, FSR @ 25°C +/- 0.3%, FSR @ 0°C, 60°COutput Impedance: Max. 500 ohmsConversion Time: 2 ms/all channelsPower Consumption: Max. 65 mA @ 5 VDCIsolation: I/O to logic: Photocoupler isolationWiring: I/O cable max. AWG14

Analog Output Modules

2-channel analog output modules, 12-bit resolution



Specs

Model M-4201 M-4202 M-4210 M-4211 M-4212

Channels 2 2 2 2 2

Current 0 to 20 mA 4 to 20 mA – – –

Voltage – – 0 to 10V -10 to 10V 0 to 5V

Connector RTB RTB RTB RTB RTB

Resolution 12-bit 12-bit 12-bit 12-bit 12-bit


Analog Output ModulesModular Remote I/O



8

Modular Rem

ote I/O

...................

150 mA150 mA

150 mA150 mA

150 mA150 mA

150 mA150 mA

200 mA Supports 1000 mA200 mA

200 mA200 mA

200 mA

Total: 1400 mA Total: 1000 mA

200 mASupports 1000 mA

Supports 1000 mA

0V 24V

24 VDC

0V 48V

48 VDC

0V110 VAC

110 VAC

...................

8-ch , 0 VDC

M-1801 M-7804 M-1800 M-7805

8-ch , 24 VDC

Power ModulesWhen to Use a Power Module

The system power expansion module is designed to provide extra power for connected I/O expansion modules. Each NA-4000 series network adaptor can provide 1.4A @ 5 VDC. If you require more

power for your installed I/O expansion modules, you will need to use an M-7001 module. However, please note that the M-7001 can only provide 1A @ 5 VDC.

The field power distributor is designed to isolate different field voltages. For example, before you connect a 48 VDC or 110 VAC DI/O

module to a 24 VDC DI/O module, you will need an M-7002 field power distributor.

There are three types of potential distributor modules that provide extra wiring points, such as shielding ground, 0V field power, and 24V field power. For example, the 8-channel digital input (sink type) module

by itself does not have a 24V wiring point. You may add an M-7805 for easier wiring.

Power M

odules

System Power Distributor

Field Power Distributor

Potential Power Distributor

M-7001

M-7002 M-7002


0

8

7

OverviewM

odular Remote I/O

Peer-to-PeerI/O

9

10

12

Media


Ordering Inform

ation

11

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


M-7001 System power module M-7002 Field power module

0 1

2 3

4 5

6 7

24V 0V

CG CG

0V 0V

24V 24V

0 1

2 3


System Bus


Field Power Input (0 VDC)

Field Power Input (24 VDC)

System Power Input (24 VDC)

System Power Input (0 VDC)


Shield Ground

M-7001

0 1

2 3

4 5

6 7

CG CG

N N

P P

0 1

2 3


System Bus

Field Power (N)Field Power (P)

Shield Ground

Field Power Input (N)

Field Power Input (P)

*Field Power contact disconnected

*Field Power ranging from 24/48 VDC to 110/220 VAC

M-7002

System Input Voltage:• 24 VDC, 11 to 28.8 VDCField Power Input Voltage:• 24 VDC (+/- 20%)System Bus Output Voltage:• 5 VDC (Max.)Field Power Contacts Current:• 10A (Max.)

Field Power Input Voltage: • DC: 5 VDC, 24 VDC, 48 VDCAC: 110 VAC, 220 VACCurrent for Field Power Contacts:• 10A (Max.)

M-7803 Shield signal M-7804 0 VDC M-7805 24 VDC M-7806 24/0 VDC

0 1

2 3

4 5

6 7

CG CG

CG CG

CG CG

CG CG

0 1

2 3


System Bus

Field Power (N)Field Power (P)

M-7803

0 1

2 3

4 5

6 7

0V 0V

0V 0V

0V 0V

0V 0V

0 1

2 3


System Bus


M-7804

0 1

2 3

4 5

6 7

24V 24V

24V 24V

24V 24V

24V 24V

0 1

2 3


System Bus


M-7805

0 1

2 3

4 5

6 7

24V 0V

24V 0V

24V 0V

24V 0V

0 1

2 3


System Bus


M-7806

Channels: 8Mode: Shield Signal

Channels: 8Mode: 0 VDC

Channels: 8Mode: 24 VDC

Channels: 4 for 24 VDC4 for 0 VDC

Mode: 24/0 VDC

Power Modules


Power Modules

Specs

Model M-7001 M-7002 M-7803 M-7804 M-7805 M-7806

Channels 0 0 8 8 8 8

Voltage 24 VDC DC: 5, 24, 48 VDCAC: 110/220 VAC - 0 VDC 24 VDC 4-ch for 0 VDC

4-ch for 24 VDC

Purpose System Power Field Power Shield Signal Field Power Field Power Field Power

Power ModulesModular Remote I/O



8

Modular Rem

ote I/O

Accessories


TB 1600 DIN-Rail mounting screw terminal module with 20-pin connector20 pins, one-to-one assignment• Connector pitch: 3.81 mm• DIN-Rail mounting type• Dimensions (W x L x H): 77.5 x 67.5 x 51 mm (3.05 x 2.66 x 2.01 in.)• RoHS compliant•

M-8001-PK Removable terminal blockTerminal block for ioLogik 4000 series• Packing: 9 pcs in one box•

M-8003-PK Marker with 0~9 numbering

M-8004-PK Blank markerMarker for ioLogik 4000 series• Packing: 100 pcs in one box•

20-to-20-pin flat cableConnecting between TB 1600 and ioLogik 4000 series• Length: 500 mm• Number of Pins: 20•

TB 1600:• DIN-Rail mounting screw terminal module with 20-pin connector20-to-20-pin flate cable:• 20-pin to 20-pin flat cable, 500 mmM-8001-PK:• Removable terminal block, 9 pcs per packM-8003-PK:• Marker with 0 to 9 numbering, white color, 100 pcsM-8004-PK:• Blank marker, 100 pcs

Accessories


VPort 25 Fixed dome IP camera for outdoors 9-6

VPort 354 4-channel MJPEG/MPEG4 industrial video encoder 9-9

VPort 351 1-channel MJPEG/MPEG4 industrial video encoder 9-12

VPort 3310 1-channel MPEG4 industrial video server 9-15

VPort 251 1-channel MJPEG/MPEG4 video encoder 9-17

VPort 2141 4-channel MJPEG video server 9-19

VPort D351 1-channel MJPEG/MPEG4 industrial video decoder 9-21

SoftNVR Advanced video-over-IP surveillance software 9-23

SoftDVR™ Pro Video-over-IP surveillance software 9-24

VPort SDK User-friendly software development kit 9-26

Video Networking Products

9Video Networking Products




9


Solution Tutorial

Industrial Video Networking SolutionsEmpower Your Video Network System with Industrial-grade Reliability

LED Display

Temperature Sensor

Traffic SignalsSmoke Detector

Gigabit Fiber Optic Cable (1000BaseSX/LX/LHX/ZX)Twisted Pair Cable (10/100BaseT(X))Coaxial CableSerial Cable (RS-232/422/485)I/O Signal

Gigabit Turbo Ring

VPort 351 1-ch IndustrialVideo Encoder

VPort D351 Industrial Video Decoder


Gigabit Managed Ethernet Switch

EthernetI/O

I/O Monitor Video Surveillance Data Control

Control Center

SoftNVR/SoftDVR IP Surveillance Software

CCTV


VPort 25 IP66 Fixed Dome IP Camera

Storage

Analog Camera

Server

EmbeddedComputer

Traffic Controller

DeviceServer

Analog Camera


0

9

8

OverviewVideo Netw

orking Products

Modular

Remote I/O

10

12

Media


11

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ationSolution TutorialVideo Networking Products

Thanks to the ever-increasing popularity of IP networks, transmitting video, voice, and data simultaneously over Ethernet/Internet is becoming a standard feature at locations the world over. Because of this, CCTV surveillance systems are also becoming more commonplace. Versatile and advanced video digitizing and compression technologies, such as MJPEG and MPEGx, make it possible to migrate CCTV surveillance systems to IP-based platforms. This means that video-over-IP solutions, which include IP cameras, video servers, and NVRs (Network Video Recorders), are used by some of the hottest products in the CCTV surveillance market. However, most video-over-IP solutions on the market today are designed for general purpose applications, which means they are not suitable for unpredictable industrial environments. In fact, some seemingly commonplace applications, such as road traffic control and monitoring, oil and gas refineries and pipelines, mining pits, etc., should be classified as industrial-grade, and as such require using rugged, well-designed video-over-IP solutions to ensure that the video surveillance system works properly.

To meet these stringent requirements, Moxa’s new line of VPort industrial video-over-IP solutions feature an industrial-grade rugged design and extra-high reliability.

Moxa’s industrial video networking solutions include video servers and IP cameras to meet the requirements of a variety of application environments, such as transportation, utilities, factory monitoring, and automatic control systems. The video servers, which include video encoders and video decoders, are designed for rugged hardware protection for use in demanding industrial environments. The IP camera, with vandal-proof protection and high-quality day/night lens, is suitable for outdoor environments.

In addition to video networking products, Moxa is also an one source provider of industrial Ethernet switches, serial-to-Ethernet device servers, I/O servers, and embedded computing solutions for industrial automation applications. This means that you can use Moxa’s products to build a highly reliable industrial automation network.

Leading the Industrial Video-over-IP Evolution

Integrated and Applicable Video Networking Solutions



9



IP30 Protection

Optional RJ45 or Fiber Ethernet port

No heater, fanless design

IP66-rated protection

Vandal-proof design

PoE and direct-wired power supplys

DIN-RailMounting

Products used in industrial environments must have a rugged design to provide better protection against adverse conditions. In general, ruggedized products should have the following characteristics:

1. Power Redundancy A backup power supply is required since power lines used in harsh industrial environments have a greater chance of failing. This means that industrial products should have at least 2 power inputs to provide sufficient redundancy.

2. Enclosure Protection A rugged mechanism design means having good physical protection against unexpected damage from external factors. The Ingress Protection (IP) rating index (EN60529) is an international classification system that rates the effectiveness of sealing for enclosures of electrical equipment against the intrusion of foreign objects (e.g., tools, dust, fingers) and moisture. The IP rating system can be used to provide a better protection of the effectiveness of an enclosure.

3. EMI and Surge Protection Compared to commercial-type environments, industrial environments are more likely to be subjected to severe electrical

and magnetic influences. In order to protect electronic devices, higher EMI and surge protection are essentials for industrial applications. And for some industrial applications, safety approvals and demanding certifications, such as UL508 and ATEX (ATmosphere EXplosible), are also required.

4. High MTBF (Mean Time Between Failures) The MTBF value is the “average” time between failures for a device. A higher MTBF value indicates that a device is more reliable.

5. Wide Operating Temperature Range The operating temperature range is also a key issue for industrial products. In fact, some industrial applications require products that are guaranteed to operate in temperatures ranging from as low as -40°C to as high as 75°C. For these types of applications, it is important to look for products that do not use a built-in fan, since products with fans tend to have a lower MTBF.

6. DIN-Rail Mounting and Panel MountingA 35 mm DIN-Rail is used for many industrial applications to provide a convenient means of mounting all of the devices used for the application. For this reason, it is essential that industrial products support both DIN-Rail mounting and panel mounting.

12/24 VDC or 24 VAC redundant power inputs•DIN-Rail mounting and panel mounting accessories available•IP30 protection enclosure •-40 to 75°C operating temperature range for T models•Choose either RJ45 or fiber optic Ethernet ports•Industrial EMI/ESD protection and UL508, •ATEX Class 1, Div. 2 (Pending) certifications

PoE (Power-over-Ethernet) and direct-wired power supply for •power redundancy-40 to 50°C operating temperature without heater or fan•IP66-rated for protection from rain and dust•Vandal-proof form factor for preventing damage from unexpected •external forcesVersatile installation options for outdoor environments•

Solution Tutorial

VPort Industrial Video Servers

VPort Series IP Cameras

Industrial-grade Rugged Design and Reliability


0

9

8

OverviewVideo Netw

orking Products

Modular

Remote I/O

10

12

Media


11

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ationSolution TutorialVideo Networking Products

Finding user-friendly video-over-IP software is important, since users can get right to work with little training. Moxa provides user-friendly

IP surveillance software and a free SDK (software development kit) for application versatility.

Moxa SoftDVR™ IP surveillance software, which includes SoftDVR Lite (4 channels) and SoftDVR Pro (16 channels), is designed for small IP-based video surveillance systems. The client/sever-based network infrastructure makes it easy to build a user-friendly video surveillance system.

Multi-screen viewing format (max. 16 channels)•Event-driven recording•Search and playback are easy to use•Store data to network hard disk•Set schedule for recording and activating alarms•Remote access by web browser•

Moxa SoftNVR IP surveillance software can manage up to 64 channels in one system. This powerful video management software is designed for medium and large video networking surveillance systems. Features include advanced viewing, recording, and analyzing functions, and in addition to a user-friendly GUI, SoftNVR gives users a complete video management software solution for greater versatility.

Multi-screen viewing format (max. 64 channels)•Dual monitor capability•Video analytics and instant response•Video quality enhancement tools•Intelligent search to make locating recorded video files easy•

SoftDVR IP Surveillance Software

SoftNVR IP Surveillance Software

Free Software Development Kit for Third-party Software Developers and System Integrators

User-friendly Video-over-IP Surveillance Software for Application Versatility

Most video surveillance systems require customized video management functions, or must be integrated with other applications (e.g., SCADA, access control systems, fire alarm systems). For this reason, a user-friendly SDK (software development kit) is a good tool to have available for building customized video management systems. Moxa’s VPort SDK, which includes CGI Commands, ActiveX, and a C

library, is available free of charge to system integrators and third-party software developers. Learning to use the Moxa VPort SDK is easy, and detailed documentation and sample code is provided for quick reference. For detailed information about the SDK, please refer to the “SDK” introduction in this catalog.

Moxa VPort SDK

URL Command (CGI Commands)

ActiveX Control

API

HTML programming for web applications

Microsoft COM solution for plug-in in browsers and automation software (e.g., SCADA)

C Library for customized software and systems



9


VideoVideo Compression: MJPEG or MPEG4 (ISO/IEC 14496-2)Video Resolution:

Video Viewing: Adjustable image size and quality•Timestamp and text overlay•

Video Output: Via Ethernet port or BNC connector (1.0 Vpp, 75 ohms)

Audio Audio Input: 1 Line-in or MIC-in with 2-pin terminal block connectorAudio Output: 1 Line-out with 2-pin terminal block connector

IP66, day-and-night vandal-proof fixed dome IP camera for outdoors

25 Series

-40 to 50°C operating temperature; heater or fan not required ›IP66-rated for protection from rain and dust ›Direct-wired power input and PoE for power redundancy ›Up to 30 frames/sec at 720 x 480 resolution ›One camera lens for both day and night use ›

Introduction

The VPort 25 is a vandal-proof, IP66-rated, fixed dome IP camera for use in harsh, outdoor environments. With maximum resolution of 520 TVL and day-and-night CCD camera lens, the VPort 25 is especially well-suited for high performance video surveillance applications. To meet the outdoor environment requirements, the VPort 25 is IP66-rated

to protect it against dust and rain. In addition, the vandal-proof form factor design prevents damage from unexpected external forces, and the case-open sensor sends an alarm message when the VPort 25’s outer case is opened.

Heater and fan not required, supports direct-wired power input and PoE for power redundancy

High performance video, with full motion MJPEG/MPEG4 video stream

The VPort 25’s no-heater/fan-less embedded system provides greater reliability for outdoor use. In addition, the camera comes with

redundant power inputs: (1) direct power connection (12/24 VDC and 24 VAC) and (2) PoE (IEEE 802.3af) power input.

The VPort 25 uses the ASIC compression chip, which provides video performance up to full D1 (720 x 480) @ 30 FPS. To meet a wider

range of customer requirements, the VPort 25 supports dual-codecs, including the MJPEG and MPEG4 algorithms.

Specifications

CameraSensor: 1/3” Sony Super HAD or 1/3” Sony ExView Lens: Wide-end: F1.4, diagonal 115.4°, horizontal 90.3°

Tele-end: F2.4, diagonal 39.8°, horizontal 31.9°Focal length: F= 3-9 mm

Modulation: NTSC or PALCamera Angle: Pan: ±180°; tilt: ±85°, rotation: ±170° (manual control)Illumination: Color: 0.2 Lux at F1.2

Black and white: 0.03 Lux at F1.2Synchronization: InternalGamma Correction: 0.45White Balance: Auto tracking white balanceElectronic Shutter Speed: Auto: 1/60 (50) second to 1/100,000 second S/N Ratio: More than 50 dB (AGC off)AGC Control: On/OffFlickerless Control: On/Off Backlight Compensation: On/OffMirror: On/OffAuto Exposure, Auto Iris: On: Auto exposure

Off: Auto iris

NTSC PAL

Size Max. FPS Size Max. FPS

QVGA 320 x 240 30 320 x 288 25

CIF 352 x 240 30 352 x 288 25

VGA 640 x 480 30 640 x 576 25

4CIF 704 x 480 30 704 x 576 25

Full D1 720 x 480 30 720 x 576 25

VPort 25

Preliminary


0

9

8

OverviewVideo Netw

orking Products

Modular

Remote I/O

10

12

Media


11

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ationVPort 25Video Networking Products

NetworkProtocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, SNMPv1/v2c/v3, DDNSEthernet: 1 10/100BaseT(X) auto negotiating RJ45 port

GPIO Digital Input: 1, max. 8 mA “High”: +13 to +30V “Low”: -30 to +3VRelay Output: 1, max. 24 VDC @ 1A

LED IndicatorsNetwork: 1 LED for 10 Mbps, 1 LED for 100 MbpsPower: Power On/OffSTAT: Indicates if the system booted properlyDIP Switch: To turn the LED light On/Off

Power Requirements Input Voltage: Redundant power inputs

12/24 VDC or 24 VAC with 2-pin terminal block connector•Power-over-Ethernet (IEEE 802.3af)•

Physical CharacteristicsCasing: IP66-rated for rain and dust protection, vandal-proof supportsDimensions (ø x H): 142 x 118.9 mm (5.60 x 4.68 in.)Weight: 1100 gInstallation: Surface mounting, wall mounting

Environmental LimitsOperating Temperature: -40 to 50°C (-40 to 122°F )Storage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)

Regulatory ApprovalsSafety: UL508 (Pending) EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 2

EN61000-4-3 (RS), level 3

EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-12 (Oscillatory wave immunity), level 3Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6

Warranty1 year (see www.moxa.com/warranty for details)

Alarm FeaturesVideo motion detection with sensitivity tuning•Video loss alarm•Built-in case-open sensor alarm•Daily repeat timing schedule•JPEG snapshots for pre/trigger/post alarm images•HTTP event servers for setting customized alarm actions•

Security User level password protection•IP address filtering•

System RequirementsPentium 4, 2.4 GHz or above•512 MB memory or above•Windows XP/2000 with SP2 or above•Internet Explorer 6.x or above•DirectX 9.0c or above•

Software Bundled FreeSoftDVR™ Lite: 1- to 4-ch IP surveillance software for viewing and recordingVPort SDK PLUS: Includes CGI commands and ActiveX Control for customized application or system integration for third-party developer (Please go to Moxa’s website to download the latest SDK version.)


Product ModelCamera Sensor Modulation

SuperHAD Exview NTSC PAL

VPort 25-CAM3S52N √ √

VPort 25-CAM3S52P √ √

VPort 25-CAM3E52N √ √

VPort 25-CAM3E52P √ √


Rear ViewFront ViewSide View

118.

9

142

84.8

84.8

42.4

25

42.4

32

15

55.4 55.4

3232

71

142



9


VPort 25 Accessories

IP Camera Mounting AccessoriesMounting KitFor mounting dome camera onto gooseneck/straight tube

VP-MKHeight: 74 mm (2.91 in.)Diameter: 140 mm (5.51 in.)Weight: 500 g (1.1 lbs)

Straight Tube Gooseneck Tube Mini Pendant

VP-ST1/VP-ST2Height: 500 mm (19.69 in.)/250 mm (9.84 in.)Diameter: 50 mm (1.97 in.)Weight: 1000 g (2.2 lbs)/1800 g (4 lbs)

VP-GT Dimensions: 323 x 385 mm (11.73 x 15.16 in.)Diameter: 92 x 42 mm (3.62 x 1.65 in.)Weight: 2100 g (4.6 lbs)

VP-MPDimensions: 184 x 104 x 115.2 mm (7.24 x 4.09 x 4.54 in.)Diameter: 44.5 mm (1.75 in.)Weight: 600 g (1.3 lbs)

Wall Box Mounting Standard Corner Mounting Plate Mini Corner Plate

For mounting gooseneck/mini pendants on the wall

VP-WBMDimensions: 270 x 166 x 95 mm (10.63 x 6.54 x 3.74 in.)Weight: 2200 g (4.8 lbs)

For mounting gooseneck/mini pendants in the corner

VP-CSTDimensions: 222 x 204 x 117 mm (8.74 x 8.03 x 4.61 in.)Weight: 2000 g (4.4 lbs)

For mounting gooseneck/mini pendants in the corner

VP-CSTMDimensions: 270 x 166 x 95 mm (10.63 x 6.54 x 3.74 in.)Weight: 800 g (1.8 lbs)

Outdoor Thin Pole Direct Mounting Outdoor Wide Pole Direct Mounting Stainless Steel Straps

For mounting gooseneck/mini pendants on a pole

VP-PTDDimensions: 232 x 136 x 50 mm (9.13 x 5.35 x 1.97 in.)Recommend Pole Diameter: 112~140 mm (4.4~5.5 in.)Weight: 700 g (1.6 lbs)

For mounting gooseneck/mini pendants on a pole

VP-PWDDimensions: 270 x 170 x 60 mm (10.63 x 6.69 x 2.36 in.)Recommend Pole Diameter: 112~130 mm (4.4~5 in.)Weight: 1000 g (2.2 lbs)

For direct pole mounting or pole box on a pole

VP-SS1Length: 700 mm (27.56 in.)Width: 16 mm (0.63 in.)Weight: 20 g (0.04 lbs)


0

9

8

OverviewVideo Netw

orking Products

Modular

Remote I/O

10

12

Media


11

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform


Full motion, 4-channel MJPEG/MPEG4 industrial video encoder

354 Series

IntroductionThe VPort 354 is a high performance, 4-channel industrial video encoder that provides up to 4CIF full frame rate performance (NTSC: 704 x 480 @ 30 FPS; PAL: 704 x 576 @ 25 FPS) for each channel, and supports a dual MJPEG/MPEG4 algorithm, making it especially well- suited for use with distributed surveillance systems in critical industrial

applications. In addition, a continuous pre/post event trigger video record function can help system administrators determine why an alarm was triggered. The 2-way audio is provided for the convenience of real-time communication between system administrators located at the central site, and engineers in the field.

Industrial design with -40 to 75°C operating temperature ›and fiber optic Ethernet port2 Ethernet ports for cascade and port redundancy ›SD card slot for local storage capability ›Modbus/TCP supported for easy communication with ›SCADA softwareVideo stream up to 30 frames/sec at 4CIF (704 x 480) ›resolution for each channel

Rugged design for mission-critical industrial environments-40 to 75°C wide operating temperature•Built-in single mode or multi mode fiber optic Ethernet port, no •media converter required2 Ethernet ports are provided for cascade and port redundancy• , and to free up switch ports1 • RS-232/422/485 COM port for controlling external serial device via Ethernet

More reliable with redundant 12/24 VDC and 24 VAC power inputs•Metal form factor with IP30 protection • against dustDIN-Rail mounting installation for industrial environments•UL508 • (Pending) and Class 1, Div. 2 (Pending) certified for hazardous locations

Advanced network protocols support efficient network transmission and integration Modbus/TCP for easy communication with SCADA software •Standard RTSP (real-time streaming protocol) video streaming for •easy integrationMulticast (IGMP) protocols for efficient network transmission•

Transparent PTZ control for easy control of PTZ camerasThe VPort 354 uses Moxa’s Real COM technology to implement transparent communication for RS-232/422/485 PTZ control. The benefit of this Transparent PTZ Control function is that there is no need

to build the PTZ control driver into the VPort product. Users can use a legacy PTZ control panel or keyboard to control a PTZ camera directly.

PTZ camera

Coaxial Cable

RS-232 or RS-485CCTV Monitor

Joystick and control panel

PTZ camera

VPort 354 video encoder VPort D351

video decoder

PC

Joystick andcontrol panel


Legacy PTZ camera control Transparent PTZ camera control via Ethernet

SNMPv1/v2c/v3 MIB-II for easy network management•QoS (ToS) for configuring the transmission priority of video streams•

UPnP, DDNS, and IP filtering supported •

SerialCCTV

EthernetSerialCCTV

Preliminary



9


SD card for storing video locally when the network is down

The VPort 354 is equipped with an SD card socket (V2.0) for local storage purposes. Enable local storage when the network is down and

the video stream cannot be transmitted to record events that occur during the down-time.

VideoVideo Compression: MJPEG, MPEG4 (ISO/IEC 14496-2)Video Inputs: 4, BNC connector (1.0 Vpp, 75 ohms)NTSC/PAL: Auto-sensing or manualVideo Resolution and FPS (frames per second):

Video Viewing:Adjustable image size and quality•Timestamp and text overlay•

AudioAudio Input: 1 Line-in or MIC-in, RCA connectorAudio Output: 1 Line-out, RCA connector

Network Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNSEthernet: 2 10/100BaseT(X) auto negotiating RJ45 port, or 2 100BaseFX fiber port (Single/multi mode, SC connector)Optical Fiber:

Serial Port PTZ Port: 1 RS-232/422/485 terminal block connector, max. speed of 921.6 Kbps, with 15 KV ESD protectionCOM Port: 1 RS-232/422/485, DB9 female connector, max. speed of 921.6 Kbps, with 15 KV ESD protectionConsole Port: 1 RS-232 RJ45 port

GPIODigital Inputs: 4, max. 8 mA “High”: +13V to +30V “Low”: -30V to +3VRelay Outputs: 2, max. 24 VDC @ 1A

LED Indicators STAT: Indicates if the system booted properly or notPWR1: Power 1PWR2: Power 2

FAULT: Can be configured to correspond to system alarm, powerfailure, video loss, or disconnected networkV1: Video 1 input signal activeV2: Video 2 input signal activeV3: Video 3 input signal activeV4: Video 4 input signal active

Local StorageSD Socket: Standard SD socket V2.0 with SD LED indicator

Power Requirements Input Voltage: 2 12/24 VDC or 24 VAC inputs for redundancyPower Consumption: Approx. 12W

Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in.) Installation: DIN-Rail mounting, wall mounting (optional kit)


Regulatory ApprovalsSafety: UL508 (Pending) Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending) EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 2

EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-12 (Oscillatory wave immunity), level 3

Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 160,000 hrs Database: MIL-HDBK-217F, GB 25˚C*Please check Moxa’s website for the most up-to-date certification status.


Alarm FeaturesPre/post alarm video recording (9 MB memory)•Video motion detection with sensitivity tuning•Video loss alarm•Daily repeat timing schedule•JPEG snapshots for pre/trigger/post alarm images•Automatic transfer of stored images via email or FTP with event-•triggered actionsHTTP Event Servers for setting customized alarm actions•

PAN/TILT/ZOOMPTZ camera control through RS-232/422/485 port•PTZ control functions: PAN, TILT, ZOOM, FOCUS, moving speed, •preset position (max. 25 positions)10 custom commands for customized PTZ control•Supported devices and protocols: Pelco D, Pelco P, Dynacolor •DynaDome, Custom CameraPTZ driver upload•

Specifications

NTSC PAL


QCIF 176 x 120 30 176 x 144 25

CIF 352 x 240 30 352 x 288 25

2CIF 704 x 240 30 704 x 288 25

VGA 640 x 480 30 640 x 576 25

4CIF 704 x 480 30 704 x 576 25

VPort 354

100BaseFX







4 km b 40 km c




0

9

8

OverviewVideo Netw

orking Products

Modular

Remote I/O

10

12

Media


11

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ationVideo Networking Products VPort 354


Mounting Kit Rear ViewFront ViewSide View

8.8

70

VPort 354

PTZ

AUDIO OUTPUT

VIDEO OUTPUT

AUDIO INPUT

V1

SD V3

V2

V4

V1

V2

V3

V4

1

2

3

4

5

STAT

PWR1

PWR2

FAULT

100M

10M

1

100M

10M

1

99.250

105

4046.2

35135

30

30

86.1

51.5

64

7380.2

55

DIN-Rail Kit





10/100BaseT(X)Multi Mode,SC Connector


VPort 354 VPort 354-T 2

VPort 354-MM-SC VPort 354-MM-SC-T 2

VPort 354-SS-SC VPort 354-SS-SC-T 2

Optional AccessoriesSoftDVR™ Pro: • 16-channel IP surveillance software for viewing and recordingDR-4524: • 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24: • 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46: • Wall mounting kitRK-4U: • 4U-high 19” rack mounting kit

Transparent PTZ Control for controlling PTZ cameras with legacy PTZ •control panel or keyboard connected to a PC or VPort decoder

Security User level password protection•IP address filtering •

System RequirementsPentium 4, 2.4 GHz or above•512 MB memory or above•Windows XP/2000 with SP2 or above•

Internet Explorer 6.x or above•DirectX 9.0c or above•

Software Bundled FreeSoftDVR™ Lite: 1- to 4-ch IP surveillance software for viewing & recording VPort SDK PLUS: Includes CGI commands and ActiveX control for customized applications or system integration for third-party developers (Please visit Moxa’s website to download the latest SDK version.)



9


Full motion, 1-channel MJPEG/MPEG4 industrial video encoder

351 Series

IntroductionThe VPort 351 is a high performance, 1-channel industrial video encoder that provides up to full D1, full frame rate performance (NTSC: 720 x 480 @ 30 FPS; PAL: 720 x 576 @ 25 FPS) and supports a dual MJPEG/MPEG4 algorithm, making it especially well-suited for use with distributed surveillance systems in critical industrial

applications. In addition, a continuous pre/post event trigger video record function can help system administrators determine why an alarm was triggered. The 2-way audio is provided for the convenience of real-time communication between system administrators located at the central site, and engineers in the field.

Industrial design with -40 to 75°C operating temperature and ›fiber optic Ethernet port Video stream up to 30 frames/sec at full D1 (720 x 480) resolution ›Pre/post-alarm video recording function for advanced ›surveillance2-way (1 in/1 out) audio supported ›Free VPort SDK PLUS and 4-channel video surveillance software ›

Rugged design for mission-critical industrial environments

-40 to 75°C wide operating temperature•Built-in single mode or multi mode optical fiber Ethernet port; no media •converter requiredUL508 and Class 1, Div. 2 (Pending) certified for hazardous locations•

Advanced network protocols support efficient network transmission and integration

Standard RTSP (real-time streaming protocol) video streaming for •easy integrationMulticast (IGMP) protocols for efficient network transmission•SNMPv1/v2c/v3 MIB-II for easy network management•

QoS (ToS) for configuring the transmission priority of video •streamsUPnP, DDNS, and IP filtering supported•

Transparent PTZ control for easy control of PTZ cameras

The VPort 351 adopts Moxa’s Real COM technology to implement transparent communication for RS-232/422/485 PTZ control. The benefit of this transparent PTZ control function is that it eliminates

the need to build a PTZ control driver into the VPort product, since legacy PTZ control panels or keyboards can be used to control the PTZ camera directly.

PTZ camera

Coaxial Cable

RS-232 or RS-485CCTV Monitor

Joystick and control panel

PTZ camera

VPort 351 video encoder VPort D351

video decoder

PC



Legacy PTZ camera control Transparent PTZ camera control via Ethernet

SerialCCTV

EthernetSerialCCTV

Redundant 12/24 VDC and 24 VAC power inputs ensure greater •reliabilityMetal form factor with IP30 protection against dust•DIN-Rail mounting installation for industrial environments•

VPort 351


0

9

8

OverviewVideo Netw

orking Products

Modular

Remote I/O

10

12

Media


11

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform


VideoVideo Compression: MJPEG, MPEG4 (ISO/IEC 14496-2)Video Input: 1, BNC connector (1.0 Vpp, 75 ohms)Video Output: 1, loop-through BNC connectorNTSC/PAL: Auto-sensing or manualVideo Resolution and FPS (frames per second):

Video Viewing:

Adjustable image size and quality•Timestamp and text overlay•

AudioAudio Input: 1 Line-in or MIC-in, 3.5 mm phone jackAudio Output: 1 Line-out, 3.5 mm phone jack

Network Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS

Ethernet: 1 10/100BaseT(X) auto negotiating RJ45 port, or 1 100BaseFX fiber port (Single/multi mode, SC connector)

Optical Fiber:

Serial Port PTZ Port: 1, RS-232/422/485 terminal block connector, max. 115.2 KbpsConsole Port: 1 RS-232 RJ45 port


LED Indicators STAT: Indicates if the system boots properly or notPWR1: Power 1PWR2: Power 2

FAULT: Can be configured to correspond to system alarm, power failure, video loss, or disconnected networkVIDEO: Video input signal activeAUDIO TEST: Audio input signal in test mode

PTZ: PTZ control signal active

Physical CharacteristicsCasing: IP30 protection, metal caseDimensions (W x H x D): 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in.) Weight: 960 g Installation: DIN-Rail mounting, wall mounting (optional kit)

Power Requirements Input Voltage: 2 12/24 VDC or 24 VAC inputs for redundancyPower Consumption: Max. 8W


Regulatory ApprovalsSafety: UL508 Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending) EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 2 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-12 (Oscillatory wave immunity), level 3Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6

MTBF: 272,000 hrs Database: MIL-HDBK-217F, GB 25˚C*Please check Moxa’s website for the most up-to-date certification status.


Alarm FeaturesPre/post alarm video recording (9 MB memory)•Video motion detection with sensitivity tuning•Video loss alarm•Daily repeat timing schedule•JPEG snapshots for pre/trigger/post alarm images•Automatic transfer of stored images via email or FTP with event-•triggered actionsHTTP Event Servers for setting customized alarm actions•

PAN/TILT/ZOOMPTZ camera control through RS-232/422/485 port•PTZ control functions: PAN, TILT, ZOOM, FOCUS, moving speed, •preset position (max. 25 positions)10 custom commands for customized PTZ control•Supported devices and protocols: Pelco D, Pelco P, Dynacolor •DynaDome, Custom CameraPTZ driver upload•Transparent PTZ control for controlling the PTZ camera with legacy •PTZ control panel or keyboard connected to a PC or VPort decoder

Security User level password protection•IP address filtering •

Specifications

NTSC PAL


QVGA 320 x 240 30 320 x 288 25

CIF 352 x 240 30 352 x 288 25

VGA 640 x 480 30 640 x 576 25

4CIF 704 x 480 30 704 x 576 25

Full D1 720 x 480 30 720 x 576 25

100BaseFX







4 km b 40 km c





9



Mounting Kit Rear ViewFront ViewSide View DIN-Rail Kit





10/100BaseT(X)Multi Mode,SC Connector


VPort 351 VPort 351-T 1

VPort 351-M-SC VPort 351-M-SC-T 1

VPort 351-S-SC VPort 351-S-SC-T 1

Optional AccessoriesSoftDVR™ Pro: • 16-channel IP surveillance software for viewing and recordingDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46: • Wall mounting kitRK-4U: • 4U-high 19” rack mounting kit

VPort 351


Software Bundled FreeSoftDVR™ Lite: 1- to 4-channel IP surveillance software for viewing and recording

VPort SDK PLUS: Includes CGI commands and ActiveX Control for customized application or system integration for third-party developer (Please go to Moxa’s website to download the latest SDK version.)


0

9

8

OverviewVideo Netw

orking Products

Modular

Remote I/O

10

12

Media


11

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform


Rugged design, 1-channel MPEG4 industrial video server (encoder) 3310 Series

Introduction

The VPort 3310 is a 1-channel industrial video server (encoder) that uses the standard MPEG4 algorithm, and features DIN-Rail mounting capability, 24 VDC redundant power inputs, and IP30 protection to meet the requirements of inustrial environments. The cutting edge MPEG4 algorithm gives VPort 3310 an FPS of up to 30 in CIF resolution (352 x 240), with maximum bandwidth of

1.6 Mbps, to provide high video performance and more efficient network transmission. In addition, VPort 3310 also supports audio communication for a voice-over-IP solution, making the control of your video surveillance system more real-time.

Industrial design with -40 to 75°C operating temperature ›Compress analog video/audio signals in MPEG4 video stream ›Multicast (IGMP) for transmission efficiency ›Video stream up to 30 frames/sec at CIF (352 x 240) resolution ›Free VPort SDK and 4-channel video surveillance software ›

Video Video Compression: MPEG4 (ISO/IEC 14496-2) Video Input: 1, BNC connector (1.0 Vpp, 75 ohms)Video Output: 1, loop-through BNC connectorNTSC/PAL: Auto-sensing or manualVideo Resolution and FPS (frame per second):

Video Viewing:Adjustable image size and quality•B/W or Color control•Timestamp and text overlay•

AudioAudio Input: 1 Line-in or Mic-in port, 3.5 mm phone jack

Network Protocols: TCP, UDP, HTTP, SMTP, FTP, RTSP, RTP, RTCP, NTP, DNS, DDNS, IGMPv3, SNMPv1/v2c/v3, DHCP, UPnP, PPPoEEthernet: 1 RJ45 port, 10/100BaseT(X) auto negotiation

Serial Port COM Port: 1, RS-232 in DB9 Male or RS-485 in terminal block, max. 115.2 Kbps


LED Indicators PWR1: Power 1PWR2: Power 2FAULT: Power failureVIDEO: Video inputAUDIO: Audio inputSERIAL: COM port status


Dimension (W x H x D): 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in.)Weight: 790 g Installation: DIN-Rail mounting, wall mounting (optional kit)

Power Requirements Input Voltage: 2 24 VDC power inputs for redundancy


Specifications

NTSC PAL


QCIF 176 x 120 30 176 x 144 25

CIF 352 x 240 30 352 x 288 25

VGA 640 x 480 10 640 x 576 8

4CIF 704 x 480 10 704 x 576 8



9


Regulatory Approvals EMI: FCC Part 15, CISPR (EN55022) class BEMS: EN61000-4-2 (ESD), level 3

EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 4 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 EN61000-4-12

Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 152,000 hrs


Alarm FeaturesVideo motion detection with sensitivity tuning •Daily repeat timing schedule•

JPEG snapshots for pre/trigger/post alarm images•Automatic transfer of stored images via email or FTP with •event-triggered actions

PAN/TILT/ZOOMPTZ camera control through RS-232/485 port •Automatic PTZ camera model detection•Supported devices protocol: Sony VISCA, Cannon VC-C1/VC-C3/ •VC-C4, Samsung SmartDOME, Dynacolor DynaDOME, Pelco D protocol, Liling PIH-7x00, Ernitec, Custom Camera

SecurityUser level password protection•IP address filtering•

Software Bundled FreeSoftDVR™ Lite: 1- to 4-channel IP surveillance software for viewing and recordingVPort SDK: Includes CGI commands and ActiveX Control and API for customized application or system integration for third-party developer (Please contact with Moxa’s sales representative if you require VPort SDK.)


Mounting Kit Rear ViewSide View Front ViewDIN-Rail Kit

VPort 3310:• 1-channel MPEG4 industrial video server with 24 VDC redundant power inputs, 0 to 60°CVPort 3310-T:• 1-channel MPEG4 industrial video server with 24 VDC redundant power inputs, -40 to 75°C


Optional AccessoriesSoftDVR™ Pro: • 16-channel IP surveillance software for viewing and recording

DR-4524: • 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC input

DR-75-24: • 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC input

DR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switch

WK-46: • Wall mounting kit

RK-4U:• 4U-high 19” rack mounting kit

VPort 3310


0

9

8

OverviewVideo Netw

orking Products

Modular

Remote I/O

10

12

Media


11

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform


Full motion, 1-channel MJPEG/MPEG4 video encoder 251

Introduction

Compress analog video/audio signals into MJPEG/MPEG4 ›video streamVideo stream up to 30 frames/sec at full D1 (720 x 480) resolution ›2-way (1 in, 1 out) audio supported ›Transparent PTZ control for using legacy PTZ control panel or › keyboardLoop-through power output for powering an analog camera ›Free VPort SDK PLUS and 4-channel video surveillance software ›

The VPort 251 is a high performance, 1-channel video encoder with compact form factor that is suitable for installation in a variety of locations, including outdoor camera cabinets. To make installation easier, the VPort 251 supports both panel mounting and DIN-Rail mounting (with DK-35A accessory), and 1 loop-through power output for powering an analog camera. In addition, the VPort 251 provides

up to full D1, full frame rate video performance (NTSC: 720 x 480 up to 30 FPS; PAL: 720 x 576 up to 25 FPS) and supports both MJPEG or MPEG4, making it especially well-suited for use with distributed video surveillance systems. A 2-way audio function is also provided for the convenience of real-time communication between system administrators located at the central site, and engineers in the field.

Specifications

VideoVideo Compression: MJPEG, MPEG4 (ISO/IEC 14496-2)

Video Inputs: 1, BNC connector (1.0 Vpp, 75 ohms)

NTSC/PAL: Auto-sensing or manual

Video Resolution and FPS (frame per second):

NTSC PAL


QVGA 320 x 240 30 320 x 288 25

CIF 352 x 240 30 352 x 288 25

VGA 640 x 480 30 640 x 576 25

4CIF 704 x 480 30 704 x 576 25

Full D1 720 x 480 30 720 x 576 25

Video Viewing:

Adjustable image size and quality•Timestamp and text overlay•

AudioAudio Input: 1 Line-in or Mic-in, 3.5 mm phone jack

Audio Output: 1 Line-out, 3.5 mm phone jack

Network Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, DDNS, SNMPv1/v2c/v3

Ethernet: 1 RJ45 port, 10/100BaseT(X) auto negotiation

Serial Port PTZ Port: 1, RS-232/422/485 terminal block connector, max. 115.2 Kbps

Console Port: 1 RS-232 RJ45 port

GPIODigital Input: 1, max. 8 mA

“High”: +13V to +30V

“Low”: -30V to +3V

Relay Output: 1, max. 24 VDC @ 1A

LED IndicatorsSTAT: Indicates if the system boots properly or not

VIDEO: Video input signal active

PTZ: PTZ control signal active

Physical CharacteristicsDimensions (W x H x D): 88.2 x 106 x 50 mm (3.47 x 4.17 x 1.97 in.)

Weight: 850 g

Installation: Wall (Panel) mounting, DIN-Rail mounting (optional kit)

Power Requirements Input: 12/24 VDC or 24 VAC power input

Output: 2-pin terminal block connector for loop-through from power input

Power Consumption: Approx. 7.5W



9


Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F)


Ambient Relative Humidity: 5% to 95% (non-condensing)

Regulatory ApprovalsEMI: FCC Part 15, CISPR (EN55022) class A

EMS: EN61000-4-2 (ESD), level 2

EN61000-4-3 (RS), level 3

EN61000-4-4 (EFT), level 3

EN61000-4-5 (Surge), level 3

EN61000-4-6 (CS), level 3

EN61000-4-12 (Oscillatory wave immunity), level 3

Shock: IEC 60068-2-27




Alarm FeaturesVideo motion detection with sensitivity tuning •Video loss alarm •Daily repeat timing schedule•JPEG snapshots for pre/trigger/post alarm images•Automatic transfer of stored images via email or FTP with •event-triggered actionsHTTP Event Servers for setting customized alarm actions•

PAN/TILT/ZOOMPTZ camera control through RS-232/422/485 port•PTZ control functions: PAN, TILT, ZOOM, FOCUS, moving speed, •preset position (max. 25 positions)10 custom commands for customized PTZ control •Supported devices and protocols: •Pelco D, Pelco P, Dynacolor DynaDOME, Custom CameraPTZ driver upload•Transparent PTZ control for controlling the PTZ camera with legacy •PTZ control panel or keyboard connected to a PC or VPort decoder

Security User level password protection•IP address filtering•


Software Bundled FreeSoftDVR™ Lite: 1- to 4-ch IP surveillance software for viewing and recording

VPort SDK PLUS: Includes CGI commands and ActiveX Control for customized application or system integration for third-party developer (Please go to Moxa’s website to download the latest SDK version.)

106

100.2

88.2

25

125.6

50

VPort 2511-Channel Video Encoder

Ordering Information VPort 251: 1-channel MJPEG/MPEG4 video encoder, 0 to 60°C

Optional AccessoriesSoftDVR™ Pro:• 16-channel IP surveillance software for viewing and recordingPower Adaptor•- US Plug: 120 VAC, 60Hz, P/N: 1117000025100- GER Plug: 230 VAC, 50Hz, P/N: 1117000025200- UK Plug: 230 VAC, 50Hz, P/N: 1117000025400- JP Plug: 100 to 240 VAC, 50Hz/60Hz, P/N: 1117000022700

DK-35A:• DIN-Rail mounting kit (35 mm)


Front View

Rear View

Side View Top View

VPort 251


0

9

8

OverviewVideo Netw

orking Products

Modular

Remote I/O

10

12

Media


11

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform


Compact, 4-channel MJPEG video server (encoder)

Compress analog video signals in MJPEG video stream ›Video stream up to 30 frames/sec at CIF (352 x 240) resolution, ›and 15 frames/sec at Quad view PPPoE, DDNS, UPnP, and IP filtering supported ›Free VPort SDK and 4-channel video surveillance software ›

2141

Introduction

Moxa VPort 2141 video server, equipped with 4-channel video inputs image digitizer, image compressor with MJPEG compression, and web server with 10/100 Mbps Ethernet, can digitize analog video sources

and distribute digital images over IP network, turning your CCTV system into a “Video-over-IP” network system.

Specifications

Video Video Compression: MJPEGVideo Input: 4, BNC connector (1.0 Vpp, 75 ohms)NTSC/PAL: Auto-sensing or manualVideo Resolution and FPS (frame per second):

Video Viewing:Adjustable image size and quality•B/W or Color control•Timestamp and text overlay•5 privacy mask for each camera•

Network Protocols: TCP, HTTP, SMTP, FTP, NTP, DNS, DHCP, PPPoE, DDNS, UPnPEthernet: 1 RJ45 port, 10/100BaseT(X) auto negotiiation

Serial Port COM1 Port: RS-232 in DB9 male, max. 115.2 KbpsCOM2 Port: RS-485 in terminal block, max. 115.2 Kbps

GPIODigital Inputs: 4, max. 12 VDC @ 50 mARelay Outputs: 4, max. 24 VDC @ 1A, 125 VAC @ 0.5A

NTSC PAL


QCIF 176 x 112 30 176 x 144 25

CIF 352 x 240 30 352 x 288 25

4CIF 704 x 480 10 704 x 576 8

Quad 10 8

LED Indicators Network: ACTIVE, LINK, FDX (full duplex) System: POWER, CONNECT, SERIAL

Physical CharacteristicsDimension (W x H x D): 146.2 x 163.2 x 40 mm (5.76 x 6.43 x 1.57 in.)Weight: 820 gInstallation: Wall mounting, DIN-Rail mounting (with optional kit)

Power Requirements Input Voltage: 12 VDC, 1.5A Consumption: Approx. 8W Alternative Power Input: Terminal block for 12~15 VDC/VAC, min. 1.5A Power Output: Terminal block for 12 VDC, max. 500 mA

Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F)Storage Temperature: -40 to 70°C (-40 to 158°F)Ambient Relative Humidity: 5 to 95% (non-condensing)

Regulatory ApprovalsCE, FCC


Alarm FeaturesVideo motion detection with percentage and sensitivity tuning •Daily repeat timing schedule•JPEG snapshots for pre/trigger/post alarm images•Automatic transfer of stored images via email or FTP with •event-triggered actions



9


PAN/TILT/ZOOMPTZ camera control through RS-232/485 port •Automatic PTZ camera model detection•Supported devices and protocol: Sony VISCA, Cannon VC-C1/•VC-C3/VC-C4, Dynacolor SmartDOME, Pelco D-protocol, Liling PIH-7x00, Ernitec, Custom Camera

SecurityUser level password protection•IP address filtering •

Software Bundled FreeSoftDVR™ Lite: 1- to 4-channel IP surveillance software for viewing and recordingVPort SDK: Includes CGI commands and ActiveX Control and API for customized application or system integration for third-party developer (Please contact with Moxa’s sales representative if you require VPort SDK.)


Rear View

Top ViewSide View Front View

VPort 2141: 4-channel MJPEG video server with 100-240V power adaptor (12 VDC, 1.5A, or 12 VDC, 1.25A for UK plug)

Optional AccessoriesSoftDVR™ Pro: • 16-channel IP surveillance software for viewing and recordingDK-35A: • DIN-Rail mounting kit (35 mm)


VPort 2141


0

9

8

OverviewVideo Netw

orking Products

Modular

Remote I/O

10

12

Media


11

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ationVPort D351Video Networking Products

1-channel MJPEG/MPEG4 industrial video decoder D351

Introduction

The VPort D351 is a 1-channel video decoder for decoding MPEG4/MJPEG video streams from VPort series video encoders (not include VPort 2110, VPort 2140, VPort 2310, VPort 2141, and VPort 3310) and VPort IP Cameras back to analog video signals. The analog video signal can be sent to legacy CCTV devices, such as monitors, multiplexers, and matrix switches, which can be used as originally intended as part of CCTV systems. In addition, bi-directional audio enables ready-to-use voice-over-IP communication between the video

encoder and decoder. Monitoring cameras that are part of large CCTV systems is easy with the VPort D351, which can be set up to switch between different video sources either manually or automatically within a given time interval. Up to 64 video sources can be included in the list. In addition, the 2 DIs located on the top panel of the VPort D351 can be used to create 2 control buttons for up and down video source selection.

Decode MJPEG and MPEG4 video streams to analog video ›signal automaticallyManual selection or automatic scan with maximum of ›64 video sources2-way (1 in/1 out) audio supported ›Transparent › PTZ control with legacy PTZ controller SNMP for network management ›

Specifications

Video Video Decoding: MPEG4, MJPEG (Auto detecting) Video Input: Video streams from VPort series video encoders and VPort series IP cameras over TCP/IP networks (not include VPort 2110, VPort 2140, VPort 2310, VPort 2141, and VPort 3310)Video Output: 1, BNC connector, NTSC or PALResolution: Max. 540 TVL lineVideo Source: Up to 64, selected manually by web server or digital inputs, or selected automatically by scanning within a set time intervalVideo Viewing:

Max. 30/25 FPS (NTSC/PAL) can be decoded•OSD (on-screen display) with video source, video source IP, date/•time, and customized information

AudioAudio Input: 1 Line-in or Mic-in Audio Output: 1 Line-outAudio Encoding: PCM, MonoAudio Decoding: PCM, Mono

Network Protocols: TCP, UDP, HTTP, SMTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, SNMPv1/v2c/v3Ethernet: 1 RJ45 port, 10/100BaseT(X) auto negotiiation

Serial Port PTZ Port: 1, RS-232/422/485 terminal block connector, max. 115.2 Kbps baudrate

Console Port: 1, RS-232 RJ45 port


LED Indicators STAT: Indicates if system booted up properly or notPWR1: Power 1PWR2: Power 2FAULT: Can be configured to correspond to system alarm, power failure, video loss, or disconnected network

Physical CharacteristicsDimensions (W x H x D): 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in.)Weight: 910 g Installation: DIN-Rail mounting, wall mounting (optional kit)

Power RequirementsInput Voltage: 2 12/24 VDC and 24 VAC power inputs for redundancy

Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F)Storage Temperature: -40 to 85°C (-40 to 185°F)Ambient Relative Humidity: 5 to 95% (non-condensing)



9


Regulatory Approvals Safety: UL508 EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 2

EN61000-4-3 (RS), level 3EN61000-4-4 (EFT), level 3EN61000-4-5 (Surge), level 3EN61000-4-6 (CS), level 2EN61000-4-12 (Oscillatory wave immunity), level 3

Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6


Alarm FeaturesAutomatically switch to the video source once an event is triggered

PAN/TILT/ZOOMTransparent PTZ camera control with legacy PTZ controller through the RS-232/422/485 port

SecurityUser level password protection•IP address filtering•


Dec

od

er

VPort D351

100M

10M


VPort D351: 1-channel MJPEG/MPEG4 industrial video decoder, 12/24 VDC and 24 VAC redundant power input, 0 to 60°C

Optional AccessoriesDR-4524: • 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24: • 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46: • Wall mounting kitRK-4U:• 4U-high 19” rack mounting kit


VPort D351


0

9

8

OverviewVideo Netw

orking Products

Modular

Remote I/O

10

12

Media


11

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ationVideo Networking Products SoftNVR

SoftNVRAdvanced IP surveillance software for managing up to 64 video channels

Features

Moxa SoftNVR IP surveillance software can manage up to 64 video stream channels generated by VPort series products (not includ-ing VPort 2000 series and VPort 3310) simultaneously. Features include dual monitor display, video analysis, instant alarm, event recording, and video enhancement tools. SoftNVR gives users an advanced video management tool for medium to large video surveillance networking systems.

Up to• 64 channels in one system Dual monitor display capability for •convenient viewing

Video analysis with motion • object, and video loss detection

Instant response for alarm notification• Simple and • user-friendly setup for recording schedule

Multifunction playback system with •intelligent search

Video enhancement tools for image quality •tuning

I/O device integration • Live • viewing from popular web browsers

System RequirementsTotal FPS at CIF 600 or more 480 to 600 240 to 600 120 to 240 less than 120

CPU Intel Core 2 Duo QX6700 Intel Core 2 Duo E6400 Intel Pentium D 930 Intel P4 2.8 GHz Intel P4 2.4 GHz

RAM 2 GB 1 GB 1 GB 512 MB 512 MB

Motherboard Intel 945 or 965 chip, Intel chipset recommended

Display ATI Radeon 9200, nVIDIA GeForce FX-5200, Intel 945 / 965, or above (ATI recommended)

Ethernet 100BaseT or above, Gigabit LAN recommended

Hard Disk 80 GB or above

OS MS Windows 2000/XP Pro SP2/2003

Preliminary



9


Expandable and easy-to-use video-over-IP surveillance software

Viewing & playback, anywhere & anytime

Recording & storing over the Ethernet/Internet

Pro

Introduction

Remote access from popular web browsers•Supports 1, 4, 6, 8, 9, 10, 13, 16 camera viewing formats •Maximum of 16 cameras in a system•Synchronized video/audio viewing and recording (for VPort •MPEG4 video servers) Historical playback by time and event•Zoom-in/Zoom-out function for individual cameras when playing •back imagesTake snapshots in playback mode to get JPEG images for printing •or to save as evidenceCan adjust the contrast, brightness, sharpness, blur, and grayscale •of the snapshot image

Moxa SoftDVR™ Pro IP surveillance software is designed for video-

over-IP surveillance systems that use Moxa VPort series video

servers as the distributed video networking solution. With the help of

Moxa SoftDVR™, system integrators can seamlessly integrate other

applications, such as I/O sensors and alarms, with CCTV systems over

an IP-based network.

Recording action can be triggered in round-the-clock mode or •event mode of VMD (Video Motion Detection) and DIRecord video in AVI format• -compatible with popular media playersDynamically adjust recording frame rate over the LAN/Internet to •match the real frame transmit speed, to keep the video synchro-nized with the actual timeRecorded video format can be selected as adjustable FPS MJPEG, •or MPEG4 standard, for VPort MJPEG video serversRecyclable override of hard disk space in FIFO (First-In-First-Out) •sequenceRecorded video files can be stored on a local PC or Windows-•based networked storage server

SoftDVR

™ Pro


0

9

8

OverviewVideo Netw

orking Products

Modular

Remote I/O

10

12

Media


11

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

OrderingInform

ationVideo Networking Products SoftDVR™ Pro

SoftDVR™ Lite bundled free with VPort series video servers

1- to 4-ch (Quad) viewing format; max. 4 cameras•Supports viewing and recording on local PCs•Full image VMD with sensitivity tuning•Schedule jobs for recording•System requirements: •

- MS Windows XP - Intel Pentium 4 , 2.4 GHz HT (Hyper-Threading) or above - 512 MB SDRAM or above - DirectX 9.0C or above - Nvidia GeForce or ATI TNT2 graphics card with 32 MB display memory or above

Ordering Information SoftDVR™ Pro:• CD with SoftDVR™ Pro software, SQL database software, and user’s manual

Items included:

KeyPro(pluginUSBport)•MoxaSoftDVR™ProQuickInstallationGuide•

Administrators can set up the time schedule of remote service and the •recording action for each camera

Schedule jobs for recording and remote service

Area-selectable Video Motion Detection (VMD) function for each camera•Sensitivity tuning for the VMD•Alarm can be triggered by VMD, video lost, communication failure, storage •failure, storage full, DIs, and then sent by email, or trigger relays (DOs), sound, or a PTZ camera to a preset position

Alarm message triggered and sent

Can configure each camera’s name, video quality, and video resolution •separatelySupports PTZ camera controls (same as VPort series video servers’ support •list) Supports Moxa VPort series video servers•Up to 32 users can be added to one system•Supports remote VPort’s firmware upgrade•Can set up the camera view and system operation for each user •Automatically resume viewing and recording after system reboot•Cameras can be managed easily with your own e-map•

Video server configuration & system management

System Requirements

MSWindowsXP •IntelDualCore,2.0GHzorabove•1GBSDRAMorabove •NvidiaGeForceorATITNT2graphiccardwith64MBdisplaymemoryorabove• DirectX 9.0C or above•



9


Moxa IVN (Industrial Video Networking) solutions, which include VPort series video servers and SoftDVR™ IP surveillance software, are future-proof, ready-to-use video-over-IP solutions for video surveillance applications. With the growing popularity of IP networks, more and more users need to integrate their video management system with other monitoring and control systems (e.g., SCADA or HMI) to get the benefits of centralization and inter-operation. To

assist third-party developers with this intergration, we are providing Moxa VPort SDK PLUS and VPort SDK to build customized video management systems, or to integrate VPort series products into comprehensive monitoring and control systems.

ActiveX Work Process

API Module Structure

APWindows Register Tree

ActiveX

Request1

Uni-KeyFound & Call

2

Load & Execute

3

* The API of VPort SDK PLUS is not available now, and will be released soon!

Sample codes available

Sample codes available

AP

Direct AccessOptional Direct Access

Internal Usage Relationship

Streaming Receiver AV Decode/Display

Packet Parse

Server Resource

Server Control

Packet Maker

Device Search

VPort SDKUser-friendly software development kits for third-party developers to customize their video-over-IP management system

Introduction

These are easy-to-use CGI commands used with HTML programming for web systems. Users can acquire video images and control VPort series products from their own customized web pages by embedding

these CGI commands into the HTML source code. All of the URL commands are listed in VPort’s user's manual, or a CGI command manual.

ActiveX Control SDKActiveX Control is an OCX component, which uses Microsoft COM (Component Object Model) technology to enable software components to communicate. ActiveX Control is used widely with platforms that support WIN32, IE Plug-in, and Visual Basic, and is also popular in automation system software, such as SCADA. Moxa ActiveX Control SDK is a user-friendly, customized tool for programmers that supports versatile parameters for customized viewing, recording, PTZ camera control, event triggering, and recorded video playback. Moxa ActiveX Control SDK is provided free of charge, and supports VB, VC, and C# developing environments, as well as plug-ins for web applications and automation tools (e.g., SCADA software). Third-party developers who want to use ActiveX SDK can contact a Moxa sales representatives to apply for a free copy.

API SDK For some video management applications, the ActiveX control SDK may not provide users with enough functionality. In this case, users can use the API SDK, which includes a detailed C library, to program their own customized solutions in a Visual C++ or C# environment. The API SDK includes a total of 9 DLL modules. For the time being, the API SDK supports the WIN32, Linux, and WIN CE pocket 2003 platforms.

API SDK is also provided free of charge. However, since the API SDK uses proprietary technology and the programmer must be an experienced, professional C programmer, we are not releasing the API SDK publicly. Third-party developers who would like to use API SDK should contact a Moxa sales representative to apply for a free copy. Some verification is required.

VPort SDK PLUS: Supports VPort 25/354/351/251 and future products

VPort SDK: Supports VPort 2000 series and VPort 3310

URL Commands

VPort SDK

IMC-101G Industrial Gigabit media converter 10-2

IMC-101 Industrial media converter 10-4

IMC-21 Entry-level industrial media converter 10-6

Industrial Media Converters


10




10


IMC-101G

IMC-101G Series

IntroductionThe IMC-101G industrial Gigabit media converters are designed to provide reliable and stable 10/100/1000BaseT(X) to SFP media conversion in harsh industrial environments. The IMC-101G’s industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101G converter

comes with a relay output warning alarm to help prevent damage and loss. All IMC-101G models are subjected to a 100% burn-in test, and are available in models that support a standard operating temperature range of 0 to 60°C, and an extended operating temperature range of -40 to 75°C.

10/100/1000BaseT(X) and 1000BaseSFP slot supported ›Link Fault Pass-Through (LFP) ›Power failure, port break alarm by relay output ›Redundant power input ›-40 to 75°C operating temperature range (T models) ›Certified to operate in hazardous locations ›


IEEE 802.3u for 100BaseT(X) and 100BaseFX,IEEE 802.3ab for 1000BaseT(X),IEEE 802.3z for 1000BaseSX/LX/LHX/ZX

InterfaceRJ45 Ports: 10/100/1000BaseT(X)Fiber Ports: 1000BaseSFP slotLED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 1000M (TP and Fiber port)DIP Switch: Port break alarm mask, Link Fault Pass-Through, Fiber AN/ForceAlarm Contact: One relay output with current carrying capacity of 1A @ 24 VDC

Power RequirementsInput Voltage: 24 VDC (12 to 45 VDC), redundant inputsInput Current (@ 24 V): 0.11AConnection: Removable terminal blockOverload Current Protection: 1.1AReverse Polarity Protection: Present



Regulatory ApprovalsSafety: UL508EMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3

EN61000-4-3 (RS), level 3EN61000-4-4 (EFT), level 3EN61000-4-5 (Surge), level 3EN61000-4-6 (CS), level 3EN61000-4-8EN61000-4-11

Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 500,000 hrs

Database: Telcordia (Bellcore), GB*Please check Moxa’s website for the most up-to-date status.


Specifications

Industrial Gigabit Ethernet to fiber media converter



0

10

9

OverviewM

edia Converters

12

Accessories

11

8

Modular

Remote I/O

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

OrderingInform

ation

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


IMC-101GIndustrial Media Converters


35

105 53.6


IMC-101G: • Industrial 10/100/1000BaseT(X) to 1000BaseSX/LX/LHX/ZX media converter, 0 to 60°C

IMC-101G-T: • Industrial 10/100/1000BaseT(X) to 1000BaseSX/LX/LHX/ZX media converter, -40 to 75°C

* IMC-101G series supports 1 1000BaseSFP slot. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.




10


IMC-101 Series

IntroductionThe IMC-101 industrial media converters provide industrial grade media conversion between 10/100BaseT(X) and 100BaseFX (SC/ST connectors). The IMC-101’s reliable industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101 converter comes with a relay output warning alarm to help prevent damage and loss. The IMC-101 media converters are certified for harsh industrial environments, such as in hazardous

locations (Class 1, Division 2/Zone 2, DNV, and GL Certification), and comply with FCC, UL, and CE standards. The IMC-101 series is available with models that support an operating temperature of 0 to 60˚C, and an extended operating temperature of -40 to 75˚C. All IMC-101 series are subjected to a 100% burn-in test.

10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X › Link Fault Pass-Through (LFP) › Power failure, port break alarm by relay output › Redundant power inputs ›-40 to 75°C operating temperature range (T models) › Certified to operate in hazardous locations (Class 1, Div. 2/Zone 2) ›

IMC-101

Power RequirementsInput Voltage: 24 VDC (12 to 48 VDC), redundant inputsInput Current (@ 24 V): 0.16AConnection: Removable terminal blockOverload Current Protection: 1.1AReverse Polarity Protection: Present



Regulatory ApprovalsSafety: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1Hazardous Location: UL/cUL Class1, Division 2, Groups A, B, C, and D; ATEX Class1, Zone 2, Ex nC IIC (IMC-101-M-ST and IMC-101-S-SC-80 pending)Maritime: DNV, GLEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3

EN61000-4-3 (RS), level 3EN61000-4-4 (EFT), level 3


IEEE 802.3u for 100BaseT(X) and 100BaseFX

InterfaceRJ45 Ports: 10/100BaseT(X)Fiber Ports: 100BaseFX (SC/ST connectors)LED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 100M (Fiber port), FDX/COL (Fiber port)DIP Switch: 100BaseFX Full/Half duplex selection, port break alarm maskAlarm Contact: One relay output with current carrying capacity of 1A @ 24 VDC

Optical Fiber

Specifications

100BaseFX










Industrial 10/100BaseT(X) to 100BaseFX media converter


0

10

9

OverviewM

edia Converters

12

Accessories

11

8

Modular

Remote I/O

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

OrderingInform

ation

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


IMC-101Industrial Media Converters



35

105 53.6


IMC-101-M-SC:• Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, SC connector, 0 to 60°CIMC-101-M-ST:• Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, ST connector, 0 to 60°CIMC-101-S-SC:• Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC connector, 40 km, 0 to 60°CIMC-101-S-SC-80:• Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC connector, 80 km, 0 to 60°CIMC-101-M-SC-T: • Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, SC connector, -40 to 75°CIMC-101-M-ST-T:• Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, ST connector, -40 to 75°CIMC-101-S-SC-T:• Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC connector, 40 km, -40 to 75°CIMC-101-S-SC-80-T: • Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC connector, 80 km, -40 to 75°C

Optional AccessoriesDR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchWK-46:• Wall mounting kitRK-4U:• 4U-high 19” rack mounting kit

EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-8

EN61000-4-11Shock: IEC 60068-2-27Freefall: IEC 60068-2-32

Vibration: IEC 60068-2-6MTBF: 401,000 hrs Database: MIL-HDBK-217F, GB 25˚C*Please check Moxa’s website for the most up-to-date status.




10


IMC-21 Series

IntroductionThe IMC-21 series are entry-level 10/100BaseT(X) to 100BaseFX and 10BaseT to 10BaseFL media converters designed to provide reliable and stable operation in harsh industrial environments. The IMC-21 is a cost-effective solution that runs on either a 12 to 45 VDC power input or 18 to 30 VAC power input. The IMC-21 can operate

reliably in temperatures ranging from -10 to 60°C, and the rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21 is easy to mount on a DIN-Rail or in distribution boxes.

Multi mode, single mode with SC or ST fiber connector ›Link Fault Pass-Through (LFP) ›Power inputs: 12 to 45 VDC, 18 to 30 VAC (47-63 Hz) ›-10 to 60°C operating temperature range ›DIP Switch to select FDX/HDX/10/100/Auto/Force ›

IMC-21

Min. TX Output: 10BaseFL: -16 dBm 100BaseFX (Multi mode): -20 dBm 100BaseFX (Single mode): -5 dBmMax. TX Output: 10BaseFL: -7 dBm 100BaseFX (Multi mode): -14 dBm 100BaseFX (Single mode): 0 dBmRX Sensitivity: 10BaseFL: -34.1 dBm 100BaseFX (Multi mode): -34 to -30 dBm 100BaseFX (Single mode): -36 to -32 dBm

Power RequirementsInput Voltage: 12 to 45 VDC, 18 to 30 VAC (47-63 Hz)Power Consumption (@ 24 V): 0.15AConnection: Removable 3-contact terminal block Overload Current Protection: 1.1AReverse Polarity Protection: Present

Physical CharacteristicsCasing: IP30 protection, plastic case Dimensions (W x H x D): 25 x 100 x 74 mm (0.98 x 3.93 x 2.91 in.)Weight: 125 gInstallation: DIN-Rail mounting

Environmental LimitsOperating Temperature: -10 to 60°C (14 to 140°F) Storage Temperature: -40 to 70°C (-40 to 158°F)Ambient Relative Humidity: 5 to 95% (non-condensing)



InterfaceRJ45 Ports:

IMC-21-M-SC, IMC-21-M-ST, IMC-21-S-SC: 10/100BaseT(X)•IMC-21-M-ST-FL: 10BaseT•

Fiber Ports:IMC-21-M-SC, IMC-21-M-ST, IMC-21-S-SC: 100BaseFX (SC/ST •connectors)IMC-21-M-ST-FL: 10BaseFL (ST connector only) •

LED Indicators:IMC-21-M-SC, IMC-21-M-ST, IMC-21-S-SC: Power, 10/100M (TP •port), 100M (fiber port), FDX/COL (fiber port)IMC-21-M-ST-FL: Power, LNK/ACT (fiber port), LNK/ACT (TP port)•

DIP Switch: IMC-21-M-SC, IMC-21-M-ST, IMC-21-S-SC: •- 10/100M (TP port), Half/Full mode (TP and FX ports), Force/Auto

mode (TP port), Link Fault Pass-Through (LFP)IMC-21-M-ST-FL: •- MDI/MDI-X (TP port), Half/Full mode (TP port)

Optical FiberDistance: 10BaseFL: 2 km, 820 nm

100BaseFX (Multi mode): 5 km, 1300 nm 100BaseFX (Single mode): 40 km, 1310 nm

Specifications

Entry-level industrial 10/100BaseT(X) to 100BaseFX and 10BaseT to 10BaseFL media converter


0

10

9

OverviewM

edia Converters

12

Accessories

11

8

Modular

Remote I/O

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

OrderingInform

ation

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


IMC-21Industrial Media Converters



Rear ViewFront ViewDIN-Rail KitSide View Bottom ViewTop View

25 25 25 25

25 25

10/100M 10M

10/100M 10M

Regulatory ApprovalsSafety: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 EMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD)

EN61000-4-3 (RS)EN61000-4-4 (EFT)EN61000-4-5 (Surge)EN61000-4-6 (CS)

Shock: IEC 60068-2-27Freefall: IEC 60068-2-32Vibration: IEC 60068-2-6MTBF: 353,000 hrs Database: MIL-HDBK-217F, GB 25˚C


IMC-21-M-SC:• Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, SC connector, -10 to 60°C IMC-21-M-ST:• Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, ST connector, -10 to 60°C IMC-21-S-SC:• Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC connector, -10 to 60°C IMC-21-M-ST-FL:• Industrial 10BaseT to 10BaseFL media converter, multi mode, ST connector, -10 to 60°C

Optional Accessories DR-4524:• 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC inputDR-120-24: • 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switchRK-4U• : 4U-high 19” rack mounting kit

ABC-01

Features

RS-232 RJ45 console port connection•Complete configuration storage for Moxa’s managed Ethernet •switches and wireless product (AWK-3121)Automatic loading of system configuration after system reboots•

Manual loading and saving of system configuration through web •consolePortable low-power design that requires no power supply•CE and FCC approval•

Automatic Backup Configuration, ABC-01 can save and load the configuration of Moxa’s managed Ethernet switches and wireless product (AWK-3121) via RS-232 console port. ABC-01 thus makes it easier to manage the backup of system parameters or replacement of

an Ethernet switch and wireless product. With the assistance of the ABC-01, users can quickly re-install a substitute product (of the same model) and/or recover the entire system configuration, including IP address, if any failure occurs.

Introduction

Operation Connectors: RS-232 RJ45 portPower Requirement: 3 to 5 VDC, power input via RS-232 RTSConfiguration: via Moxa managed Ethernet switches’ and wireless product’s (AWK-3121) web console

Physical CharacteristicsCasing: PVC molding, IP40Dimension (W x H x D): 32.5 x 97 x 12 mm (1.28 x 3.82 x 0.47 in.)Weight: 50 gInstallation: M4 screw (< 4 mm)Cable Length: 35 cm, including connectors

Environmental LimitsOperating Temperature: 0 to 60°C (32 to 140°F)Storage Temperature: -20 to 70°C (-4 to 158°F)Ambient Relative Humidity: 5 to 95 % (non-condensing)

Regulatory ApprovalsEMI: FCC Part 15, CISPR (EN55022) class AEMS: EN61000-4-2 (ESD), level 3

EN61000-4-3 (RS), level 3EN61000-4-4 (EFT), level 3EN61000-4-5 (Surge), level 3EN61000-4-6 (CS), level 3


Specifications


ABC-01: RS-232 RJ45-based automatic backup configurator, 0 to 60˚C



11

Accessories

Industrial RS-232 RJ45-based automatic configuration backup solution

Reduce system down time without extra power input ›Plug-n-Play system backup and restoration ›Front notes for identification ›Compact, rugged and reliable design ›Support Moxa’s managed Ethernet switches and wireless ›product (AWK-3121)

ABC-01

DIN-Rail Power Supplies

Model DR-4524 DR-75-24 DR-120-24 DR-75-48 DR-120-48

DIN-Rail 24/48 VDC power supplies

DimensionsUnit: mm (W x H x D)

78 x 93 x 67 mm 55.5 x 125.2 x 100 mm 65.5 x 125.2 x 100 mm 55.5 x 125.2 x 100 mm 65.5 x 125.2 x 100 mm

Power 45W 75W 120W 75W 120W

Input

85-264 VAC (47-63 Hz) or 120-370 VDC

88-132 VAC/176-264 VAC (47-63 Hz)

by switch or 248-370 VDC

85-264 VAC (47-63 Hz)

or 120-370 VDC

88-132 VAC/176-264 VAC (47-63 Hz)

by switch or 248-370 VDC

Output 48W, 24 VDC, 0-2A 76.8W, 24 VDC, 0-3.2A 120W, 24 VDC, 0-5A 76.8W, 48 VDC, 0-1.6A 120W, 48 VDC, 0-2.5A

Over voltage protection

115-135% of rated output voltage 29-33V

Overload protection 105-150%

Type Constant current limiting

Reset Auto recovery

Inrush current 30A/115V or 60A/230V

Weight 400 g 550 g 650 g 550 g 650 g

Working temp. andrelative humidity

-10 to 50˚C to 90% RH -10 to 60˚C, 20 to 90% RH

Warranty 3 years

Safety standards T V EN60950-1, UL508 approved

EMC standardsCISPR22 (EN55022) class B, EN61000-4-2, 3, 4, 5, 6, 8, 11,

ENV50204, EN61000-3-2, -3, EN50082-2


DR-4524:• 45W/2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC inputDR-75-24:• 75W/3.2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC inputDR-120-24:• 120W/5A DIN-Rail 24 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switchDR-75-48: • 75W/1.6A DIN-Rail 48 VDC power supply with universal 85 to 264 VAC inputDR-120-48: • 120W/2.5A DIN-Rail 48 VDC power supply with 88 to 132 VAC/176 to 264 VAC input by switch

93(36.6)

67(26.3)

78(30.7)

125.2(49.3)

100(39.4)55.5(21.8)

125.2(49.3)

100(39.4)65.5(25.8)

125.2(49.3)

100(39.4)55.5(21.8)

125.2(49.3)

100(39.4)65.5(25.8)

DIN-Rail 24/48 VDC Power Supplies


0

11

10

OverviewAccessories

Media

Converters

12

Ordering Inform

ation

9

8

Modular

Remote I/O

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


DIN-Rail Power SuppliesAccessories

Model WK-32 WK-46

Mounting Kit

Matched Products

Modular Ethernet Switch: EDS-828/728 series Managed Ethernet Switch: EDS-G509/500A/400A and PX-1510 seriesUnmanaged Ethernet Switch: EDS-G308/P308/316/309/308/305 seriesWireless AP/Bridge/AP Client: AWK-3121/1100 seriesMedia Converter: IMC-101G/101 seriesVideo Server: VPort 354/351/3310/D351 series

Dimensions(W x H x D)

30.3 x 140 x 12.3 mm 51.6 x 66.8 x 1 mm

Model RK-4U DK-M12-305 DK-35A

Mounting Kit

Matched Products

Managed Ethernet Switch: EDS-G509/500A/400A and PX-1510 seriesUnmanaged Ethernet Switch: EDS-G308/P308/316/309/308/305/200A/200 seriesWireless AP/Bridge/AP Client: AWK-3121/1100 seriesMedia Converter: IMC-101G/101/21 seriesVideo Server: VPort 354/351/3310/D351 series

Unmanaged Ethernet Switch:EDS-305-M12 series

Video Server:VPort 251/2141 series

Dimensions(W x H x D)

481 x 177.8 x 202.4 mm 60 x 125 x 12.8 mm 42.5 x 10 x 19.34 mm

Mounting Kits

Mounting Kits

Wall mounting, rack mounting, and DIN-Rail mounting kits

Ordering Information WK-32: • Wall mounting kit for EDS-828/728 seriesWK-46: • Wall mounting kitRK-4U: • 4U-high 19” rack mounting kit

DK-M12-305: • DIN-Rail mounting kit for EDS-305-M12 seriesDK-35A: • DIN-Rail mounting kit for VPort 251/2141 series

30.3

140

30.3

12.3 66

.8

51.6

177.

8

202.

4

440

481

60

125

412.8

6.2

19.34

15.68

42.5



11

AccessoriesM

ounting Kits


Features

Multi-mode Optical Fiber Patch Cords

SC to SC Connectors

ST to ST Connectors

SC to ST Connectors

Optical fiber patch cords, full duplex multi-mode, 62.5 microns



These fiber optic patch cords can be used with the following products:Multi-mode models of industrial Ethernet switches, VPort 354/VPort 351 industrial video encoders, and industrial media converters

Standard multi-mode (graded index)•Duplex for TX/RX, cable is joined together in lamp-cord fashion for easy separation when installing•62.5/125 micron core fiber•Ceramic ferrules offer a typical insertion loss of • ≤ 0.5 dBOperating temperature: -20 to 75• °C (-4 to 167°F)Storage temperature: -40 to 85• °C (-40 to 185°F)Standards: IEC607932-2•Wavelength: 850/1300 nm•

Model Name Cable Length

PA-MM(62.5)-2SC2SC-1M 1 meter

PA-MM(62.5)-2SC2SC-3M 3 meters




PA-MM(62.5)-2ST2ST-1M 1 meter

PA-MM(62.5)-2ST2ST-3M 3 meters




PA-MM(62.5)-2SC2ST-1M 1 meter

PA-MM(62.5)-2SC2ST-3M 3 meters




0

11

10

OverviewAccessories

Media

Converters

12

Ordering Inform

ation

9

8

Modular

Remote I/O

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1

Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches


Multi-mode Optical Fiber Patch CordsAccessories

EDS-828

EDS-82810GLayer 3 modular managed Ethernet switch system with 6 slots for 4-port fast Ethernet interface modules and 2 slots for 2-port Gigabit interface modules, up to 24+4G ports, 0 to 60°C

NOTE: See the IM series ordering information for available modules.

EDS-728

EDS-72810GModular managed Ethernet switch system with 6 slots for 4-port fast Ethernet interface modules and 2 slots for 2-port Gigabit interface modules, up to 24+4G ports, 0 to 60°C

NOTE: See the IM series ordering information for available modules.

IM Series Interface Modules

IM-2GTX Gigabit Ethernet interface module with 2 10/100/1000BaseT(X) ports, 0 to 60°C

IM-2GSFPGigabit Ethernet interface module with 2 1000BaseSFP slots, 0 to 60°C (see the SFP-1G series ordering information for available SFP Gigabit Ethernet modules)

IM-4TX Fast Ethernet interface module with 4 10/100BaseT(X) ports, 0 to 60°C

IM-4MSC Fast Ethernet interface module with 4 100BaseFX multi-mode ports with SC connectors, 0 to 60°C

IM-4MST Fast Ethernet interface module with 4 100BaseFX multi-mode ports with ST connectors, 0 to 60°C

IM-2MSC/2TX Fast Ethernet interface module with 2 100BaseFX multi-mode ports with SC connectors, and 2 10/100BaseT(X) ports, 0 to 60°C

IM-2MST/2TX Fast Ethernet interface module with 2 100BaseFX multi-mode ports with ST connectors, and 2 10/100BaseT(X) ports, 0 to 60°C

IM-4SSC Fast Ethernet interface module with 4 100BaseFX single-mode ports with SC connectors, 0 to 60°C

IM-2SSC/2TX Fast Ethernet interface module with 2 100BaseFX single-mode ports with SC connectors, and 2 10/100BaseT(X) ports, 0 to 60°C

IM-1LSC/3TX Fast Ethernet interface module with 1 100BaseFX single-mode port with SC connector for 80 km transmission, and 3 10/100BaseT(X) ports, 0 to 60°C

(Gigabit) Managed Ethernet SwitchesEDS-G509 Series

EDS-G509Industrial full Gigabit managed Ethernet switch with 4 10/100/1000BaseT(X) ports, and 5 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, 0 to 60°C

EDS-G509-TIndustrial full Gigabit managed Ethernet switch with 4 10/100/1000BaseT(X) ports, and 5 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, -40 to 75°C

EDS-518A Series

EDS-518A Managed Gigabit Ethernet switch with 16 10/100BaseT(X) ports, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, 0 to 60°C

EDS-518A-MM-SCManaged Gigabit Ethernet switch with 14 10/100BaseT(X) ports, 2 100BaseFX multi-mode ports with SC connectors, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, 0 to 60°C

EDS-518A-MM-STManaged Gigabit Ethernet switch with 14 10/100BaseT(X) ports, 2 100BaseFX multi-mode ports with ST connectors, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, 0 to 60°C

EDS-518A-SS-SCManaged Gigabit Ethernet switch with 14 10/100BaseT(X) ports, 2 100BaseFX single-mode ports with SC connectors, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, 0 to 60°C

EDS-518A-SS-SC-80Managed Gigabit Ethernet switch with 14 10/100BaseT(X) ports, 2 100BaseFX single-mode ports with SC connectors for 80 km transmission, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, 0 to 60°C

EDS-518A-T Managed Gigabit Ethernet switch with 16 10/100BaseT(X) ports, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, -40 to 75°C

EDS-518A-MM-SC-TManaged Gigabit Ethernet switch with 14 10/100BaseT(X) ports, 2 100BaseFX multi-mode ports with SC connectors, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, -40 to 75°C

EDS-518A-MM-ST-TManaged Gigabit Ethernet switch with 14 10/100BaseT(X) ports, 2 100BaseFX multi-mode ports with ST connectors, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, -40 to 75°C

EDS-518A-SS-SC-TManaged Gigabit Ethernet switch with 14 10/100BaseT(X) ports, 2 100BaseFX single-mode ports with SC connectors, and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, -40 to 75°C

NOTE: See the SFP-1G series ordering information for available SFP Gigabit Ethernet modules.

Gigabit Modular Managed Ethernet Switches

EDS-510A Series

EDS-510A-3GT Managed Gigabit Ethernet switch with 7 10/100BaseT(X) ports, and 3 10/100/1000BaseT(X) ports, 0 to 60°C

EDS-510A-1GT2SFPManaged Gigabit Ethernet switch with 7 10/100BaseT(X) ports, 1 10/100/1000BaseT(X) port, and 2 1000BaseSFP slots for adding SFP-1G series Gigabit Ethernet modules, 0 to 60°C

EDS-510A-3SFPManaged Gigabit Ethernet switch with 7 10/100BaseT(X) ports, and 3 1000BaseSFP slots for adding SFP-1G series Gigabit Ethernet modules, 0 to 60°C

EDS-510A-3GT-T Managed Gigabit Ethernet switch with 7 10/100BaseT(X) ports, and 3 10/100/1000BaseT(X) ports, -40 to 75°C

Industrial Ethernet Switches



12

AppendixProduct O

rdering Information

EDS-510A-1GT2SFP-TManaged Gigabit Ethernet switch with 7 10/100BaseT(X) ports, 1 10/100/1000BaseT(X) port, and 2 1000BaseSFP slots for adding SFP-1G series Gigabit Ethernet modules, -40 to 75°C

EDS-510A-3SFP-TManaged Gigabit Ethernet switch with 7 10/100BaseT(X) ports, and 3 1000BaseSFP slots for adding SFP-1G series Gigabit Ethernet modules, -40 to 75°C


EDS-516A Series

EDS-516A Managed Ethernet switch with 16 10/100BaseT(X) ports, 0 to 60°C

EDS-516A-MM-SC Managed Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, 0 to 60°C

EDS-516A-MM-ST Managed Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, 0 to 60°C

EDS-516A-T Managed Ethernet switch with 16 10/100BaseT(X) ports, -40 to 75°C

EDS-516A-MM-SC-T Managed Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C

EDS-516A-MM-ST-T Managed Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C

EDS-508A Series




EDS-508A-SS-SC Managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, 0 to 60°C

EDS-508A-SS-SC-80 Managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors for 80 km transmission, 0 to 60°C




EDS-508A-SS-SC-T Managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C

EDS-508A-SS-SC-80-T Managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors for 80 km transmission, -40 to 75°C

EDS-505A Series




EDS-505A-SS-SC Managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, 0 to 60°C

EDS-505A-SS-SC-80 Managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors for 80 km transmission, 0 to 60°C




EDS-505A-SS-SC-T Managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C

EDS-408A Series

EDS-408A Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, 0 to 60°C

EDS-408A-MM-SC Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, 0 to 60°C

EDS-408A-MM-ST Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, 0 to 60°C

EDS-408A-SS-SC Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, 0 to 60°C

EDS-408A-T Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -40 to 75°C

EDS-408A-MM-SC-T Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C

EDS-408A-MM-ST-T Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C

EDS-408A-SS-SC-T Entry-level managed Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C

EDS-405A Series

EDS-405A Entry-level managed Ethernet switch with 5 10/100BaseT(X) ports, 0 to 60°C

EDS-405A-MM-SC Entry-level managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, 0 to 60°C

EDS-405A-MM-ST Entry-level managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, 0 to 60°C

EDS-405A-SS-SC Entry-level managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, 0 to 60°C

EDS-405A-T Entry-level managed Ethernet switch with 5 10/100BaseT(X) ports, -40 to 75°C

EDS-405A-MM-SC-T Entry-level managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C

EDS-405A-MM-ST-T Entry-level managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C

EDS-405A-SS-SC-T Entry-level managed Ethernet switch with 3 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C


0

12

10

OverviewOrdering Inform

ation M

edia Converters

9

8

Modular

Remote I/O

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1


Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

11

AccessoriesAppendix Product Ordering Information

EDS-G308 Series

EDS-G308 Unmanaged full Gigabit Ethernet switch with 8 10/100/1000BaseT(X) ports, 0 to 60°C

EDS-G308-2SFP Unmanaged full Gigabit Ethernet switch with 6 10/100/1000BaseT(X) ports and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, 0 to 60°C

EDS-G308-T Unmanaged full Gigabit Ethernet switch with 8 10/100/1000BaseT(X) ports, -40 to 75°C

EDS-G308-2SFP-TUnmanaged full Gigabit Ethernet switch with 6 10/100/1000BaseT(X) ports and 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports, -40 to 75°C


EDS-P308 Series

EDS-P308 Unmanaged Ethernet switch with 4 10/100BaseT(X) ports, and 4 PoE ports, 0 to 60°C

EDS-P308-M-SC Unmanaged Ethernet switch with 3 10/100BaseT(X) ports, 4 PoE ports, and 1 100BaseFX multi-mode port with SC connector, 0 to 60°C

EDS-P308-S-SC Unmanaged Ethernet switch with 3 10/100BaseT(X) ports, 4 PoE ports, and 1 100BaseFX single-mode port with SC connector, 0 to 60°C

EDS-P308-MM-SC Unmanaged Ethernet switch with 2 10/100BaseT(X) ports, 4 PoE ports, and 2 100BaseFX multi-mode ports with SC connectors, 0 to 60°C

EDS-P308-SS-SC Unmanaged Ethernet switch with 2 10/100BaseT(X) ports, 4 PoE ports, and 2 100BaseFX single-mode ports with SC connectors, 0 to 60°C

EDS-P308-T Unmanaged Ethernet switch with 4 10/100BaseT(X) ports, and 4 PoE ports, -40 to 75°C

EDS-P308-M-SC-T Unmanaged Ethernet switch with 3 10/100BaseT(X) ports, 4 PoE ports, and 1 100BaseFX multi-mode port with SC connector, -40 to 75°C

EDS-P308-S-SC-T Unmanaged Ethernet switch with 3 10/100BaseT(X) ports, 4 PoE ports, and 1 100BaseFX single-mode port with SC connector, -40 to 75°C

EDS-P308-MM-SC-T Unmanaged Ethernet switch with 2 10/100BaseT(X) ports, 4 PoE ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C

EDS-P308-SS-SC-T Unmanaged Ethernet switch with 2 10/100BaseT(X) ports, 4 PoE ports, and 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C

SPL-24 Series

SPL-24 PoE splitter with maximum output of 12.95W at 24 VDC, 0 to 60°C

SPL-24-T PoE splitter with maximum output of 12.95W at 24 VDC, -40 to 75°C


PX-1510 Series

PX-1510 Managed Gigabit Ethernet switch with 3 10/100BaseT(X) ports, 4 PoE 10/100BaseT(X) ports, and 3 10/100/1000BaseT(X) or 100/1000BaseSFP slots combo ports, 0 to 60°C

PX-1510-T Managed Gigabit Ethernet switch with 3 10/100BaseT(X) ports, 4 PoE 10/100BaseT(X) ports, and 3 10/100/1000BaseT(X) or 100/1000BaseSFP slots combo ports, -40 to 75°C


EDS-SNMP OPC Server Pro

EDS-SNMP OPC Server Pro OPC server for integrating SNMP devices into HMI/SCADA systems

SFP-1G Series

SFP-1GSXLC SFP module with 1 1000BaseSX port with LC connector for 0.5 km transmission, 0 to 60°C

SFP-1GLXLC SFP module with 1 1000BaseLX port with LC connector for 10 km transmission, 0 to 60°C

SFP-1GLHXLC SFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, 0 to 60°C

SFP-1GZXLC SFP module with 1 1000BaseZX port with LC connector for 80 km transmission, 0 to 60°C

SFP-1G10ALC WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission, TX 1310 nm, RX 1550 nm, 0 to 60°C

SFP-1G10BLC WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission, TX 1550 nm, RX 1310 nm, 0 to 60°C





SFP-1GSXLC-T SFP module with 1 1000BaseSX port with LC connector for 0.5 km transmission, -20 to 75°C

SFP-1GLXLC-T SFP module with 1 1000BaseLX port with LC connector for 10 km transmission, -40 to 85°C

SFP-1GLHXLC-T SFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, -40 to 85°C

SFP-1GZXLC-T SFP module with 1 1000BaseZX port with LC connector for 80 km transmission, -40 to 85°C

SFP-1G10ALC-T WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission, TX 1310 nm, RX 1550 nm, -40 to 85°C

SFP-1G10BLC-T WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission, TX 1550 nm, RX 1310 nm, -40 to 85°C







12

AppendixProduct O

rdering Information

EDS-305-M12 Series

EDS-305-M12 Unmanaged IP67-rated Ethernet switch with 5 10/100BaseT(X) ports with M12 connectors, 0 to 60°C

EDS-305-M12-T Unmanaged IP67-rated Ethernet switch with 5 10/100BaseT(X) ports with M12 connectors, -40 to 75°C

Accessories for EDS-305-M12 Series

CBL-M12D(MM4P)/RJ45-100 IP67

1-meter M12-to-RJ45 Cat-5E UTP Ethernet cable with waterproof 4-pin D-coded M12 connector

BL-M12(FF5P)/OPEN-100 IP67

1-meter M12-to-5-pin power cable with waterproof 5-pin A-coded M12 connector

M12D-4P-IP68 Field-installable D-coded screw-in sensor connector, male

M12A-5P-IP68 Field-installable A-coded screw-in sensor connector, female

EDS-316 Series

EDS-316 Unmanaged Ethernet switch with 16 10/100BaseT(X) ports, 0 to 60°C

EDS-316-M-SC Unmanaged Ethernet switch with 15 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with SC connector, 0 to 60°C

EDS-316-M-ST Unmanaged Ethernet switch with 15 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with ST connector, 0 to 60°C

EDS-316-MM-SC Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, 0 to 60°C

EDS-316-MM-ST Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, 0 to 60°C

EDS-316-MS-SCUnmanaged Ethernet switch with 14 10/100BaseT(X) ports, 1 100BaseFX multi-mode port with SC connector, and 1 100BaseFX single-mode port with SC connector, 0 to 60°C

EDS-316-S-SC Unmanaged Ethernet switch with 15 10/100BaseT(X) ports, and 1 100BaseFX single-mode port with SC connector, 0 to 60°C

EDS-316-SS-SC Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, 0 to 60°C

EDS-316-MS-SC-80Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, 1 100BaseFX multi-mode port with SC connector, and 1 100BaseFX single-mode port with SC connector for 80 km transmission, 0 to 60°C

EDS-316-S-SC-80 Unmanaged Ethernet switch with 15 10/100BaseT(X) ports, and 1 100BaseFX single-mode port with SC connector for 80 km transmission, 0 to 60°C

EDS-316-SS-SC-80Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors for 80 km transmission, 0 to 60°C

EDS-316-SS-SC-40/80Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, 1 100BaseFX single-mode port with SC connector for 40 km transmission, and 1 100BaseFX single-mode port with SC connector for 80 km transmission, 0 to 60°C

EDS-316-T Unmanaged Ethernet switch with 16 10/100BaseT(X) ports, -40 to 75°C

EDS-316-M-SC-T Unmanaged Ethernet switch with 15 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with SC connector, -40 to 75°C

EDS-316-M-ST-T Unmanaged Ethernet switch with 15 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with ST connector, -40 to 75°C

EDS-316-MM-SC-T Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C

EDS-316-MM-ST-T Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connectors, -40 to 75°C

EDS-316-MS-SC-TUnmanaged Ethernet switch with 14 10/100BaseT(X) ports, 1 100BaseFX multi-mode port with SC connector, and 1 100BaseFX single-mode port with SC connector, -40 to 75°C

EDS-316-S-SC-T Unmanaged Ethernet switch with 15 10/100BaseT(X) ports, and 1 100BaseFX single-mode port with SC connector, -40 to 75°C

EDS-316-SS-SC-T Unmanaged Ethernet switch with 14 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C

EDS-309 Series

EDS-309-3M-SC Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 3 100BaseFX multi-mode ports with SC connectors, 0 to 60°C

EDS-309-3M-ST UUnmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 3 100BaseFX multi-mode ports with ST connectors, 0 to 60°C

EDS-309-3M-SC-T Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 3 100BaseFX multi-mode ports with SC connectors, -40 to 75°C

EDS-309-3M-ST-T Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 3 100BaseFX multi-mode ports with ST connectors, -40 to 75°C

EDS-308 Series



EDS-308-MM-SC Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, 0 to 60°C

EDS-308-MM-ST Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connector, 0 to 60°C


EDS-308-SS-SC Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, 0 to 60°C


EDS-308-SS-SC-80 Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors for 80 km transmission, 0 to 60°C




0

12

10


ation M

edia Converters

9

8

Modular

Remote I/O

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1


Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

11


PT-7828 Series

PT-7828-F-24 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 1 isolated power supply (24 VDC), -40 to 85°C

PT-7828-R-24 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 1 isolated power supply (24 VDC), -40 to 85°C

PT-7828-F-24-24 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (24 VDC), -40 to 85°C

PT-7828-R-24-24 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (24 VDC), -40 to 85°C

PT-7828-F-24-48 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (24 and 48 VDC), -40 to 85°C

PT-7828-R-24-48 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (24 and 48 VDC), -40 to 85°C

PT-7828-F-24-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (24 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7828-R-24-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (24 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7828-F-48 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 1 isolated power supply (48 VDC), -40 to 85°C

PT-7828-R-48 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 1 isolated power supply (48 VDC), -40 to 85°C

PT-7828-F-48-48 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (48 VDC), -40 to 85°C


EDS-308-MM-SC-T Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connectors, -40 to 75°C

EDS-308-MM-ST-T Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connector, -40 to 75°C


EDS-308-SS-SC-T Unmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors, -40 to 75°C

EDS-308-S-SC-80-T Unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX single-mode port with SC connector for 80 km transmission, -40 to 75°C

EDS-308-SS-SC-80-TUnmanaged Ethernet switch with 6 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connectors for 80 km transmission, -40 to 75°C

EDS-305 Series



EDS-305-M-ST Unmanaged Ethernet switch with 4 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with ST connector, 0 to 60°C





EDS-305-M-ST-T Unmanaged Ethernet switch with 4 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with ST connector, -40 to 75°C


EDS-208A/208 Series

EDS-208A Unmanaged Ethernet switch with 8 10/100BaseT(X) ports; metal casing, -10 to 60°C

EDS-208A-M-SC Unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with SC connector; metal casing, -10 to 60°C

EDS-208A-M-ST Unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with ST connector; metal casing, -10 to 60°C

EDS-208 Entry-level unmanaged Ethernet switch with 8 10/100BaseT(X) ports; plastic casing, -10 to 60°C

EDS-208-M-SC Entry-level unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with SC connector; plastic casing, -10 to 60°C

EDS-208-M-ST Entry-level unmanaged Ethernet switch with 7 10/100BaseT(X) ports, and 1 100BaseFX multi-mode port with ST connector; plastic casing, -10 to 60°C

EDS-205A/205 Series

EDS-205A Unmanaged Ethernet switch with 5 10/100BaseT(X) ports; metal casing, -10 to 60°C

EDS-205 Entry-level unmanaged Ethernet switch with 5 10/100BaseT(X) ports; plastic casing, -10 to 60°C



12

AppendixProduct O

rdering Information

PT-7828-R-48-48 IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (48 VDC), -40 to 85°C

PT-7828-F-48-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (48 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7828-R-48-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (48 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7828-F-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7828-R-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7828-F-HV-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7828-R-HV-HV IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (88-300 VDC or 85-264 VAC), -40 to 85°C

NOTE: See the PM-7200 ordering information for available Gigabit and fast Ethernet modules.

PT-7728 Series

PT-7728-F-24 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 1 isolated power supply (24 VDC), -40 to 85°C

PT-7728-R-24 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 1 isolated power supply (24 VDC), -40 to 85°C

PT-7728-F-24-24 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (24 VDC), -40 to 85°C

PT-7728-R-24-24 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (24 VDC), -40 to 85°C

PT-7728-F-24-48 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (24 and 48 VDC), -40 to 85°C

PT-7728-R-24-48 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (24 and 48 VDC), -40 to 85°C

PT-7728-F-24-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (24 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7728-R-24-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (24 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7728-F-48 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 1 isolated power supply (48 VDC), -40 to 85°C

PT-7728-R-48 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 1 isolated power supply (48 VDC), -40 to 85°C

PT-7728-F-48-48 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (48 VDC), -40 to 85°C

PT-7728-R-48-48 IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (48 VDC), -40 to 85°C

PT-7728-F-48-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (48 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7728-R-48-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (48 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7728-F-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7728-R-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7728-F-HV-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, front cabling, 2 isolated power supplies (88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7728-R-HV-HV IEC 61850-3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+4G ports, rear cabling, 2 isolated power supplies (88-300 VDC or 85-264 VAC), -40 to 85°C


PT-7710 Series

PT-7710-F-LV IEC 61850-3 modular managed Ethernet switch system with 1 slot for fast Ethernet modules, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 10 or 8+2G ports, front cabling, 1 power supply (24/48 VDC), -40 to 85°C

PT-7710-D-LV IEC 61850-3 modular managed Ethernet switch system with 1 slot for fast Ethernet modules, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 10 or 8+2G ports, down cabling, 1 power supply (24/48 VDC), -40 to 85°C


0

12

10


ation M

edia Converters

9

8

Modular

Remote I/O

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1


Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

11


PT-7710-F-HV IEC 61850-3 modular managed Ethernet switch system with 1 slot for fast Ethernet modules, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 10 or 8+2G ports, front cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7710-D-HV IEC 61850-3 modular managed Ethernet switch system with 1 slot for fast Ethernet modules, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 10 or 8+2G ports, down cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C


PT-7324 Series

PT-7324-F-LV IEC 61850-3 smart Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 24 or 22+2G ports, front cabling, 1 power supply (24/48 VDC), -40 to 85°C

PT-7324-R-LV IEC 61850-3 smart Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 24 or 22+2G ports, rear cabling, 1 power supply (24/48 VDC), -40 to 85°C

PT-7324-F-HV IEC 61850-3 smart Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 24 or 22+2G ports, front cabling, 1 power supply (88-300 VDC or 85-264 VAC), -40 to 85°C

PT-7324-R-HV IEC 61850-3 smart Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 24 or 22+2G ports, rear cabling, 1 power supply (88-300 VDC or 85-264 VAC), -40 to 85°C


IKS-6726 Series

IKS-6726-F-24 Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 1 isolated power supply (24 VDC), -40 to 75°C

IKS-6726-F-24-24 Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 2 isolated power supplies (24 VDC), -40 to 75°C

IKS-6726-F-24-48 Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 2 isolated power supplies (24 and 48 VDC), -40 to 75°C

IKS-6726-F-24-HV Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 2 isolated power supplies (24 VDC and 88-300 VDC or 85-264 VAC), -40 to 75°C

IKS-6726-F-48 Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 1 isolated power supply (48 VDC), -40 to 75°C

IKS-6726-F-48-48 Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 2 isolated power supplies (48 VDC), -40 to 75°C

IKS-6726-F-48-HV Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 2 isolated power supplies (48 VDC and 88-300 VDC or 85-264 VAC), -40 to 75°C

IKS-6726-F-HV Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 75°C

IKS-6726-F-HV-HV Modular managed Ethernet switch system with 8 10/100BaseT(X) ports, 2 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to 24+2G ports, front cabling, 2 isolated power supplies (88-300 VDC or 85-264 VAC), -40 to 75°C


IKS-6324 Series

IKS-6324-F-LV Unmanaged Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 24 or 22+2G ports, front cabling, 1 power supply (24/48 VDC), -40 to 75°C

IKS-6324-F-HV Unmanaged Ethernet switch system with 22 10/100BaseT(X) ports, and 1 slot for fast Ethernet or Gigabit Ethernet modules, up to 24 or 22+2G ports, front cabling, 1 power supply (88-300 VDC or 85-264 VAC), -40 to 75°C


PM-7200 Series Interface Modules

PM-7200-4GTXSFP Gigabit Ethernet module with 4 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports (see the SFP-1G series ordering information for available SFP Gigabit Ethernet modules)

PM-7200-2GTXSFP Gigabit Ethernet module with 2 10/100/1000BaseT(X) or 1000BaseSFP slot combo ports (see the SFP-1G series ordering information for available SFP Gigabit Ethernet modules)

PM-7200-8TX Fast Ethernet module with 8 10/100BaseT(X) ports

PM-7200-6MSC Fast Ethernet module with 6 100BaseFX multi-mode ports with SC connectors

PM-7200-6MST Fast Ethernet module with 6 100BaseFX multi-mode ports with ST connectors

PM-7200-6SSC Fast Ethernet module with 6 100BaseFX single-mode ports with SC connectors

PM-7200-4MSC2TX Fast Ethernet module with 4 100BaseFX multi-mode ports with SC connectors and 2 10/100BaseT(X) ports

PM-7200-4MST2TX Fast Ethernet module with 4 100BaseFX multi-mode ports with ST connectors and 2 10/100BaseT(X) ports

PM-7200-4SSC2TX Fast Ethernet module with 4 100BaseFX single-mode ports with SC connectors and 2 10/100BaseT(X) ports

PM-7200-2MSC4TX Fast Ethernet module with 2 100BaseFX multi-mode ports with SC connectors and 4 10/100BaseT(X) ports

PM-7200-2MST4TX Fast Ethernet module with 2 100BaseFX multi-mode ports with ST connectors and 4 10/100BaseT(X) ports



12

AppendixProduct O

rdering Information

PM-7200-2SSC4TX Fast Ethernet module with 2 100BaseFX single-mode ports with SC connectors and 4 10/100BaseT(X) ports

PM-7200-1LSC6TX Fast Ethernet module with 1 100BaseFX single-mode port with SC connector for 80 km transmission and 6 10/100BaseT(X) ports

PM-7200-2MSC Fast Ethernet module with 2 100BaseFX multi-mode ports with SC connectors

PM-7200-2MST Fast Ethernet module with 2 100BaseFX multi-mode ports with ST connectors

PM-7200-2SSC Fast Ethernet module with 2 100BaseFX single-mode ports with SC connectors

PM-7200-1MSC Fast Ethernet module with 1 100BaseFX multi-mode port with SC connector

PM-7200-1MST Fast Ethernet module with 1 100BaseFX multi-mode port with ST connector

PM-7200-1SSC Fast Ethernet module with 1 100BaseFX single-mode port with SC connector

AWK-3121 Series

AWK-3121-US IEEE 802.11a/b/g wireless AP/Bridge/Client, US band, 0 to 60°C

AWK-3121-EU IEEE 802.11a/b/g wireless AP/Bridge/Client, Euro band, 0 to 60°C

AWK-3121-JP IEEE 802.11a/b/g wireless AP/Bridge/Client, Japan band, 0 to 60°C

AWK-3121-US-T IEEE 802.11a/b/g wireless AP/Bridge/Client, US band, -40 to 75°C

AWK-3121-EU-T IEEE 802.11a/b/g wireless AP/Bridge/Client, Euro band, -40 to 75°C

AWK-3121-JP-T IEEE 802.11a/b/g wireless AP/Bridge/Client, Japan band, -40 to 75°C

AWK-1200 Series

AWK-1200-AP-US IEEE 802.11g/b IP68 wireless AP/Bridge, US band, -20 to 70°C

AWK-1200-AP-EU IEEE 802.11g/b IP68 wireless AP/Bridge, Euro band, -20 to 70°C

AWK-1200-AP-JP IEEE 802.11g/b IP68 wireless AP/Bridge, Japan band, -20 to 70°C

AWK-1200-AC-US IEEE 802.11g/b IP67 wireless AP Client, US band, -20 to 70°C

AWK-1200-AC-EU IEEE 802.11g/b IP67 wireless AP Client, Euro band, -20 to 70°C

AWK-1200-AC-JP IEEE 802.11g/b IP67 wireless AP Client, Japan band, -20 to 70°C

AWK-1100 Series

AWK-1100-US IEEE 802.11g/b wireless AP/Bridge/AP Client, US band, 0 to 60°C

AWK-1100-EU IEEE 802.11g/b wireless AP/Bridge/AP Client, Euro band, 0 to 60°C

AWK-1100-JP IEEE 802.11g/b wireless AP/Bridge/AP Client, Japan band, 0 to 60°C

Antennas and Accessories

ANT-WDB-O-2 IEEE 802.11a/b/g 2.4 & 5 GHz dual-band antenna, RP-SMA (female) connector

ANT-WSB-O-02 IEEE 802.11b/g 2.4 GHz, omni-directional antenna, RP-SMA (female) connector

ANT-WSB-O-5-150 IEEE 802.11b/g 2.4 GHz, omni-directional antenna, RP-SMA (female) connector, with 150mm cable

ANT-1-O-09 IEEE 802.11b/g 2.4 GHz, omni-directional, 9 dBi antenna, N-Female connector

ANT-1-D-12 IEEE 802.11b/g 2.4 GHz, directional, 12 dBi antenna, N-Female connector

CRF-N0117SA-3M CFD200 cable, N-Male to RP SMA Male connector, 3 meters (for AWK-3121 and AWK-1100 only)

CRF-N0429N-3M CFD400 cable, N-Male to N-Male connector, 3 meters (for AWK-1200-AP only)

HA-1002SU Swivel mounting kit, swivel angle 90° horizontal, 40° vertical

ioLogik E2000 Series

ioLogik E2210 Active Ethernet I/O with 12 digital inputs and 8 digital outputs

ioLogik E2212 Active Ethernet I/O with 8 digital inputs, 8 digital outputs, and 4 configurable DIOs

ioLogik E2214 Active Ethernet I/O with 6 digital inputs and 6 relay outputs

ioLogik E2240 Active Ethernet I/O with 8 analog inputs and 2 analog outputs

ioLogik E2242 Active Ethernet I/O with 4 analog inputs and 12 configurable DIOs

ioLogik E2260 Active Ethernet I/O with 6 RTD inputs and 4 digital outputs

ioLogik E2262 Active Ethernet I/O with 8 thermocouple inputs and 4 digital outputs

Industrial Wireless AP/Bridge/AP Client

Remote I/O

Active Ethernet I/O


0

12

10


ation M

edia Converters

9

8

Modular

Remote I/O

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1


Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

11


ioLogik R2000 Series

ioLogik R2110 RS-485 remote I/O with 12 digital inputs and 8 digital outputs

ioLogik R2140 RS-485 remote I/O with 8 analog inputs and 2 analog outputs

Ethernet Peer-to-Peer I/OioMirror E3210

ioMirror E3210 Ethernet peer-to-peer I/O with 8 digital inputs and 8 digital outputs

Accessories for Stand-alone I/OLDP1602 LCD Module

LDP1602 Snap-on LCD module with 16 x 2 text display and 5 buttons (can be used with any of the E2000, R2000, and E3000 products)

Modular Remote I/ONetwork Adaptor Modules

NA-4010 Ethernet Network Adaptor (Modbus/TCP)

NA-4020 RS-485 Network Adaptor (Modbus)

NA-4021 RS-232 Network Adaptor (Modbus)

Digital Input Modules

M-1400 4 digital inputs, sink, 24 VDC

M-1401 4 digital inputs, source, 24 VDC







M-1450 4 digital inputs, 110 VAC

M-1451 4 digital inputs, 220 VAC


M-2400 4 digital outputs, sink, 24 VDC, 0.5A

M-2401 4 digital outputs, source, 24 VDC, 0.5A



M-2402 4 digital outputs, diagnostics, sink, 24 VDC, 0.5A

M-2403 4 digital outputs, diagnostics, source, 24 VDC, 0.5A

M-2404 4 digital outputs, diagnostics, sink, 24 VDC, 2A

M-2405 4 digital outputs, diagnostics, source, 24 VDC, 2A



M-2250 2 digital outputs, relay, 24 VDC/230 VAC, 2A

M-2254 2 digital outputs, triac, 12 to 125 VAC, 0.5A


M-3400 4 analog inputs, 0 to 20 mA, 12-bit


M-3410 4 analog inputs, 0 to 10V, 12-bit

M-3412 4 analog inputs, -10 to 10V, 12-bit





M-3413 4 analog inputs, -10 to 10V, 14-bit


Serial Remote I/O



12

AppendixProduct O

rdering Information

Temperature Input Modules

M-6200 2 analog inputs, RTD: PT100, JPT100

M-6201 2 analog inputs, thermocouple


M-4201 2 analog outputs, 0 to 20 mA, 12-bit

M-4202 2 analog outputs, 4 to 20 mA, 12-bit

M-4210 2 analog outputs, 0 to 10V, 12-bit

M-4211 2 analog outputs, -10 to 10V, 12-bit

M-4212 2 analog outputs, 0 to 5V, 12-bit

Power Modules

M-7001 System power expansion module, 1.0A/24 VDC

M-7002 Field power distributor module

M-7803 Potential distributor module, 8-ch, shield signal

M-7804 Potential distributor module, 8-ch, 0 VDC

M-7805 Potential distributor module, 8-ch, 24 VDC

M-7806 Potential distributor module, 4-ch/24 VDC, 4-ch/0 VDC

Accessories for Modular Remote I/OAccessories

TB 1600 DIN-Rail mounting screw terminal module with 20-pin connector

Flat Cable 20-pin to 20-pin flat cable

M-8001-PK Removable terminal block, 9 pcs per pack

M-8003-PK Marker with 0 to 9 numbering, white color, 100 pcs per pack

M-8004-PK Blank marker, 100 pcs per pack

IP CamerasVPort 25 Series

VPort 25-CAM3S52N Fixed Dome IP camera for outdoors with 1/3" SuperHAD camera sensor and NTSC modulation

VPort 25-CAM3S52P Fixed Dome IP camera for outdoors with 1/3" SuperHAD camera sensor and PAL modulation

VPort 25-CAM3E52N Fixed Dome IP camera for outdoors with 1/3" Exview camera sensor and NTSC modulation

VPort 25-CAM3E52P Fixed Dome IP camera for outdoors with 1/3" Exview camera sensor and PAL modulation

Video ServersVPort 354 Series

VPort 354 Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 10/100BaseT(X) ports, 0 to 60°C

VPort 354-MM-SC Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 multi-mode ports with SC connectors, 0 to 60°C

VPort 354-SS-SC Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 single-mode ports with SC connectors, 0 to 60°C

VPort 354-T Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 10/100BaseT(X) ports, -40 to 75°C

VPort 354-MM-SC-T Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 multi-mode ports with SC connectors, -40 to 75°C

VPort 354-SS-SC-T Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 single-mode ports with SC connectors, -40 to 75°C

VPort 351 Series

VPort 351 Full motion, 1-channel MJPEG/MPEG4 industrial video encoder with 1 10/100BaseT(X) port, 0 to 60°C

VPort 351-M-SC Full motion, 1-channel MJPEG/MPEG4 industrial video encoder with 1 multi-mode port with SC connector, 0 to 60°C

VPort 351-S-SC Full motion, 1-channel MJPEG/MPEG4 industrial video encoder with 1 single-mode port with SC connector, 0 to 60°C

VPort 351-T Full motion, 1-channel MJPEG/MPEG4 industrial video encoder with 1 10/100BaseT(X) port, -40 to 75°C

VPort 351-M-SC-T Full motion, 1-channel MJPEG/MPEG4 industrial video encoder with 1 multi-mode port with SC connector, -40 to 75°C

VPort 351-S-SC-T Full motion, 1-channel MJPEG/MPEG4 industrial video encoder with 1 single-mode port with SC connector, -40 to 75°C



0

12

10


ation M

edia Converters

9

8

Modular

Remote I/O

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1


Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

11


VPort 3310 Series

VPort 3310 Rugged 1-channel MPEG4 industrial video server with 24 VDC redundant power inputs, 0 to 60°C

VPort 3310-T Rugged 1-channel MPEG4 industrial video server with 24 VDC redundant power inputs, -40 to 75°C

VPort 251

VPort 251 Full motion, 1-channel MJPEG/MPEG4 video encoder, 0 to 60°C

VPort 2141

VPort 2141 4-channel MJPEG video server with 100-240V power adaptor (12 VDC, 1.5A, or 12 VDC, 1.25A for UK plug)

VPort D351

VPort D351 1-channel MJPEG/MPEG4 industrial video decoder with 12/24 VDC and 24 VAC redundant power inputs, 0 to 60°C

IP Surveillance SoftwareSoftNVR

SoftNVR Advanced IP surveillance software for managing up to 64 video channels

SoftDVR™ Pro

SoftDVR™ Pro Easy-to-use IP surverillance software for managing up to 16 video channels

IMC-101G Series

IMC-101G Industrial 10/100/1000BaseT(X) to 1000BaseSX/LX/LHX/ZX media converter; an SFP-1G series Gigabit Ethernet module must be purchased separately for the 1000BaseSX/LX/LHX/ZX side, 0 to 60°C

IMC-101G-T Industrial 10/100/1000BaseT(X) to 1000BaseSX/LX/LHX/ZX media converter; an SFP-1G series Gigabit Ethernet module must be purchased separately for the 1000BaseSX/LX/LHX/ZX side, -40 to 75°C


IMC-101 Series

IMC-101-M-SC Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a multi-mode port with SC connector, 0 to 60°C

IMC-101-M-ST Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a multi-mode port with ST connector, 0 to 60°C

IMC-101-S-SC Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a single-mode port with SC connector, 0 to 60°C

IMC-101-S-SC-80 Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a single-mode port with SC connector for 80 km transmission,0 to 60°C

IMC-101-M-SC-T Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a multi-mode port with SC connector, -40 to 75°C

IMC-101-M-ST-T Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a multi-mode port with ST connector, -40 to 75°C

IMC-101-S-SC-T Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a single-mode port with SC connector, -40 to 75°C

IMC-101-S-SC-80-T Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a single-mode port with SC connector for 80 km transmission, -40 to 75°C

IMC-21 Series

IMC-21-M-SC Entry-level Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a multi-mode port with SC connector, -10 to 60°C

IMC-21-M-ST Entry-level Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a multi-mode port with ST connector, -10 to 60°C

IMC-21-S-SC Entry-level Industrial 10/100BaseT(X) to 100BaseFX media converter; the 100BaseFX side uses a single-mode port with SC connector, -10 to 60°C

IMC-21-M-ST-FL Entry-level Industrial 10/10BaseT to 10BaseFL media converter; the 10BaseFL side uses a multi-mode port with ST connector, -10 to 60°C

Automatic Backup Configurator

ABC-01 Configuration backup and restoration tool for managed Ethernet switches (plugs directly into the RS-232 console port)

DIN-Rail Power Supplies

DR-4524 45W/2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC input

DR-75-24 75W/3.2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC input

DR-120-24 120W/5A DIN-Rail 24 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch

Accessories




12

AppendixProduct O

rdering Information

DR-75-48 75W/1.6A DIN-Rail 48 VDC power supply with universal 85 to 264 VAC input

DR-120-48 120W/2.5A DIN-Rail 48 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch

Mounting Kits

WK-32 Wall mounting kit for EDS-828/728 series

WK-46 Wall mounting kit

RK-4U 4U-high 19” rack mounting kit

DK-M12-305 DIN-Rail mounting kit for EDS-305-M12 series

DK-35A DIN-Rail mounting kit for VPort 251/2141 series

Multimode Optical Fiber Patch Cords

PA-MM(62.5)-SCSC-1M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, SC to SC connector, 1 meter

PA-MM(62.5)-SCSC-3M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, SC to SC connector, 3 meters



PA-MM(62.5)-STST-1M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, ST to ST connector, 1 meter

PA-MM(62.5)-STST-3M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, ST to ST connector, 3 meters



PA-MM(62.5)-SCST-1M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, SC to ST connector, 1 meter

PA-MM(62.5)-SCST-3M Optical Fiber Patch cord, full duplex Multi Mode 62.5 microns, SC to ST connector, 3 meters




0

12

10


ation M

edia Converters

9

8

Modular

Remote I/O

7

Peer-to-PeerI/O

6

Active Ethernet I/O

5

Wireless

Ethernet

4

3

2

1


Modular

EthernetSwitches

Unmanaged

EthernetSwitches

Rackmount

EthernetSwitches

Managed

EthernetSwitches

11


Moxa offers a wide selection of industrial managed Ethernet switches that exhibit high reliability, great performance, modularity,

and security, for the widest range of industrial applications (e.g., utility automation, transportation automation, manufacturing

automation). Moxa’s managed Ethernet switches feature Gigabit-speed, high fault-tolerant rings (recover time < 20 ms), and many

advanced management features, such as VLAN, QoS, IGMP snooping, SNMP, and RMON, for enhanced network management.

Attractive security features include the versatility of IEEE802.1X, HTTPS, and SSH.

Industrial-grade capability plus a high MTBF value make Moxa’s unmanaged Ethernet switches the ideal choice for applications that

rarely need to be reconfigured. Important features include redundant power inputs, Class 1, Div. 2/Zone 2 certification for hazardous

environments, wide operating temperature models (-40 to 75°C), relay output alarm for port breaks and power failure, and long-haul

transmission capability up to 80 km. Also available are the PoE (Power-over-Ethernet) unmanaged Ethernet switches that simplify

wiring in industrial environments, and M12/IP67 Ethernet switches for the toughest applications.

Moxa’s rackmount Ethernet solutions provide a reliable and open network infrastructure that allows the various systems used

with today’s industrial automation applications to communicate effectively, resulting in highest level of reliability and availability

for communications. For large-scale or outdoor application sites, long distance, EMI immune transmission requirements between

communication points can be easily met. Moxa offers two product lines with PowerTrans IEC 61850-3 rackmount Ethernet switches

and IKS series industrial rackmount Ethernet switches - that are ideal for setting up diverse automation applications, such as

substation automation, traffic control, marine & offshore, and more.

Wireless networks are becoming increasingly popular for industrial applications due to the savings that can be realized by using

fewer cables. Moxa’s Industrial Wireless AP/Bridge/AP Clients are IEEE802.11a/b/g compatible, and provide powerful security

with WPA/WPA2/802.1X/MAC address filtering. Additional features include redundant power inputs, a wide operating temperature

range from -40 to 75°C, support for PoE (Power-over-Ethernet), an IP68/67/30 metal case, and DIN-Rail mounting capability. The

enhanced reliability of these products makes them a great choice for your wireless industrial applications.

Moxa’s user-friendly Ethernet I/O simplifies industrial IT integration by connecting simple sensors, switches, gauges, LEDs, alarms,

and similar devices to an automation system. Choose from Moxa’s wide spectrum of I/O solutions, which include Active Ethernet

I/O, peer-to-peer Ethernet I/O, serial I/O, and modular remote I/O, for any PC-based data acquisition and control application. Active

Ethernet I/O is a new concept for transmitting I/O data proactively over an open network. Absolutely no programming is required to

configure the I/O’s control logic due to the patented and intuitive Click&Go™ interface.

Video networking products are used to enable remote video surveillance from anywhere on an Ethernet network. The combination

of Moxa’s industrial-strength VPort series video encoder, video decoder, IP cameras, and IP surveillance software gives you a

complete video-over-IP surveillance system that lets you take complete control of field cameras and traditional CCTV systems.

Moxa’s video products have important built-in features, such as redundant power inputs, -40 to 75°C operating range, IP66/30

protection, and DIN-Rail mounting, making these products suitable for any mission-critical industrial applications.

Moxa’s industrial-grade media converters are designed to convert Ethernet data to fiber optic signals, which can be a very cost-

effective way to extend transmission distance. By converting to fiber optic media, Ethernet data can be transmitted over distances

up to 80 km while enjoying superior EMI immunity. The industrial Ethernet-to-fiber media converters also can operate reliably in

extreme temperatures, and are an ideal combination for many industrial applications.

Moxa’s industrial Ethernet products are specially tailored for industrial environments that require a more rugged type of Ethernet solution. Moxa offers a wide

selection of Ethernet networking products, including managed/unmanaged/rackmount Ethernet switches, wireless AP/Bridge/AP client, Active Ethernet I/O,

industrial video networking products, and Ethernet-to-fiber media converters. Moxa’s products emphasize high reliability and stability for high-availability

markets by supporting advanced hardware and software features. With Moxa’s industry-leading networking products, system integrators can get a “one stop

shopping” solution for building a robust, redundant Ethernet platform with high-quality transmission and resilience.

Catalog Industrial Ethernet 2008

Documents

Transcript of Catalog Industrial Ethernet 2008