CATALOG - Gogatec

INDUSTRIAL COMMUNICATION

CONTROLS & DRIVES

SMART IOT GATEWAYS

XDSL LTE

ETHERNET

REMOTE CONTROL

& MAINTENANCE

SCADA ERP

& CLOUD-

CONNECTION

EDGE COMPUTING

& CONDITION

MONITORING

VPN ROUTER

& GATEWAYS

PLC-CONNECTIONS

CODESYS SIEMENS S7

2022

CATALOG

SUCCESSFUL AUTOMATION

TABLE OF CONTENTS

VIPA Elektronik-Systeme GmbH [email protected] Phone: +43/1/895 93 63 – 0 / Fax: – 50 www.vipa.at

VIPA SPEED7 Overview CPU-Modules

VIPA SPEED7 STUDIO

VIPA SLIO Benchmark

VIPA MICRO PLC

VIPA SPEED7 CPU-Modules

VIPA SLIO Bus Terminals

VIPA 300S CPUs with Instruction Set S7-300/S7-400 by SIEMENS

VIPA Touch Panel Computers: Professional-, Smart-Panels and Multitouch Panel PCs

VIPA 300V I/O-Units, CPs & Fieldbus

VIPA 300V Accessories

VIPA 200V Modular PLC-System

VIPA Safety with Samos Pro

VIPA General Accessories

HILSCHER netHOST FB - LAN controlled Fieldbus master for DIN rail

HILSCHER PC Fieldbus Cards

HILSCHER Protocol Converters

HILSCHER NETIO EDGE gateways for Automation Networks

PLCSPEED7-TECHNOLOGY – compatible SIEMENS S7-300® CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS

SPEED7 INCREASES THE PRODUCTIViTY OF YOUR PLANTS AND MACHINERY• Performance: Very fast processing and cycle times increase the output of machinery and

manufacturing plants • Interfaces: Onboard Ethernet, MPI, EtherCAT, PROFINET, PROFIBUS-DP Master/Slave,

PtP serial RS485 interface and integrated CP 343/543 Ethernet • Programming language: Programmable with STEP®7 by Siemens, TIA portal and SPEED7 Studio

• Standard SD Card: The SD card is used for backup, storage of program and data and also for running the CPU (the SD-Card is not necessary to run the CPU)

• Memory Management: Via VSC card it is possible to increase the work memory of the CPU up to 8MByte without changing the hardware

• Stock cost: Only a few of CPU types


4

TECHNICAL DATA SLIO 013C SLIO 014 SLIO 015 SLIO 017 SLIO IMC7

Work memory (50% program /50% data) 64-128kB 128-256kB 256-512kB 512kB - 2MB 256-512kB

Processingtime (Bit/Word/Fix-/ 20/20 20/120 10/60 10/60 10/60 Floatingpoint in nanoseconds)

Number range: FB, FC, 8191 DB 8191

Bit memory / Counter / Timer 8 8192 / 512 / 512 16kB / 2048 / 2048 8192 / 512 / 512

Local data loc. (per Prio class configurable) 1024Byte 4096Byte 1024Byte

I/O Adress area 1024 / 1024Byte 4096 /4096Byte 1024 / 1024Byte

Process image I/O 1024 / 1024Byte 4096 /4096Byte 1024 / 1024Byte

MPI max. Speed 12 MBd

Fieldbus: PROFIBUS-DP-Master integrated (under Developement) optional optional optional optional

Fieldbus: PROFIBUS-DP-Slave integrated optional optional optional optional optional

Fieldbus: PROFINET--Controler/i-Device 4 4 4 4 --

Feldbus: ETHERCAT-Master integrated -- -- -- -- 4

PtP 4 4 4 4 4

PtP on PROFIBUS jack/MPI jack toggleable 4 4 4 4 4

Ethernet PG/OP-Port integrated/Connections 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4

Ethernet CP 343 integrated/Connections -- /-- -- /-- 4 / 8 4 / 24 -- /--ISOonTCP/ISO(H1)/S7/TCP/UDP Connections -- -- 8 24 (16) --

MOTION-axis integrated -- -- -- -- optional (4/8/16/20)

VIPA SPEED-BUS -- -- -- -- --

AI / AO / Pt100 2 / -- / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / --

DI / DO / DEA’s 16 / 12 / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / --

Counter / PWM or Stepper (switchable) 4 (100kHz) / 2 (20kHz) -- / -- -- / -- -- / -- -- / --

Dimensions in mm: (W x H x D) 116,5 x 109 x 76,5 131,5 x 109 x 76,5 131,5 x 109 x 76,5 131,5 x 109 x 76,5 131,5 x 109 x 76,5

SPEED7 is available world-wide. More than 60 VIPA branch offices offer service and support

SPEED7-TECHNOLOGY – compatible SIEMENS S7-300® CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS

PLC


SPEED-Bus Interfaces Memory management

• The patented and unique VIPA SPEED bus is available in select CPUs for very fast appli - cations.

• A clear competitive advantage for you and your application.

• In addition to the MPI and PtP interfaces, an Ethernet-PG/OP interface is, of course, always available.

• This interface will remain our standard.

• Expand your work memory by inserting a VIPA MCC without changing the CPU.

• This will remain our standard.

• Because of the enormously powerful SPEED7 chip you will find hardly any limitations in automation techno logy.

• Powerful, flexible and very communicative.

• All 300S are programmable via SPEED7 Studio from VIPA or via tools of other manufacturers as well as STEP®7 and TIA Portal by SIEMENS.

• With VIPA, you decide which engineering tool you want to apply!

• The mixture of VIPA modules with modules of other manufacturers is of course possible.

• This also minimizes your warehousing costs. Just think about it!

Performance User friendly Compatible

5

TECHNICAL DATA 312SC 313SC 313SC/DPM 314SC/DPM 314ST/DPM 315SB/DPM 315SN/NET 315PN 317SE/DPM 317SN/NET 317PN

Work memory (50% program /50% data) 128kB - 1MB 256kB - 1MB 512kB -2MB 512kB - 2MB 1MB - 4MB 4MB - 8MB

Processingtime (Bit/Word/Fix-/21/125 21/125 11/63 13/75 10/58

Floatingpoint in nanoseconds)

Number range: FB, FC, 2047 8191 DB 4095 8191

Bit memory / Counter / Timer 8192 / 512 / 512 16K / 2K / 2K

Local data loc. (per Prio class configurable) 512Byte 8192Byte (configurable)

I/O Adress area 1024 / 1024Byte 2048 / 2048Byte 8192 / 8192Byte

Process image I/O 128 / 128Byte 8192 / 8192Byte

MPI max. Speed 187,5kBit 12 MBd

Fieldbus: PROFIBUS-DP-Master integrated -- -- 4 4 4 4 4 4 4 4 4

Fieldbus: PROFINET-Controller integrated -- -- -- -- -- -- -- 4 -- -- 4

Fieldbus: ETHERCAT-Master integrated -- -- -- -- -- -- -- -- -- -- --

PtP 4 4 4 -- -- -- -- -- -- -- --

PtP on PROFIBUS jack toggleable -- -- 4 4 4 4 4 4 4 4 4

PtP on PROFIBUS jack/MPI jack toggleable -- -- -- 4 -- -- -- -- -- -- --

Ethernet PG/OP-Port integrated/Connections 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4 4 / 4

Ethernet CP 343 integrated/Connections -- / -- -- / -- -- / -- -- / -- -- / -- -- / -- 4/ 32 4/ 32 -- / -- 4/ 32 4/ 32

ISOonTCP/ISO(H1)/S7/TCP/UDP Connections -- -- -- -- -- -- 8 8 -- 64 24

MOTION-axis integrated -- -- -- -- -- -- -- -- -- -- --

VIPA SPEED-BUS -- -- -- -- 4 -- -- -- 4 4 4

AI / AO/ Pt100 -- / -- / -- 4 / 2 / 1 4 / 2 / 1 4 / 2 / 1 4 / 2 / 1 -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / --

DI / DO/ DIO’s 16 / 8 / -- 24 /16 /-- 16 /16 /-- 24 / 16 / 8 8 / -- / 8 -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / -- -- / -- / --

Counter / PWM or Stepper (switchable) 2 (10kHz) 3 (30kHz) 3 (30kHz) 4 (60kHz) 4 (100kHz) -- -- -- -- -- --

Dimensions in mm: (W x H x D) 80x125x130 120x125x130 80x125x130 120x125x130 80x125x130 40x125x130 80x125x130

SW010L1MA 0,-

SW010B1MA 378,-

SW010P1MA 880,-

SPEED7 STUDIO Intelligent + intuitive + open = instant entry

SPEED 7 Studio – the new VIPA engineering software, with which any SPEED7 controller can be programmed more economically and efficiently.

The new intelligence of the hardware configuration, the intuitive user interface and the system openness make SPEED7 Studio the powerful and easy-to-use tool. Optimize automation tasks, reduce development costs to a minimum, and save time- and cost intensive software training. The user can again focus on his actual engineer-ing tasks. SPEED7 Studio is systematically based on user friendliness. Every-thing has been freshly designed, from the hardware configuration, pogramming and networking to the parametrization of frequency inverters and drives, and even visualization. All functions, properties and libraries are automatically prepared and displayed in the SPEED7 Studio editor view. Unique SPEED7 tools make the software attractive and efficient. High speed applications are even more economic with the SPEED bus functions. EtherCAT is fully integrated. The EtherCAT configurator quickly and safely configures applications, automatically reads them and labels them with standard symbols. Integrated SLIO functiona-lities such as automatic calculation of power consumption and integrated process image calculation, make SPEED7 Studio a highly efficient tool that holistically integrates the SPEED7 product spectrum.

PLC


6

Highlights

• Photorealistic Hardware-/Network-Configuration • Intuitive User Interface • Free Window Docking • Tool-Tips • Known S7-Programming Environment • VIPA-specific Blocks • Full integrated Visualization • WEB-Visualization

additionally SPEED 7 STUDIO BASIC • SCADA-System MOVICON

additionally SPEED 7 STUDIO PRO • Motion-Control using PLCopen Standard • Intuitive Axes Configuration • CAM Editor

SPEED7 SOFTWARE PRICE Order No.: Description in Euro

1x Software licence SPEED7 Studio LITE for projects up to 128kB, (up to 3 PCs) 1x Software licence SPEED7 Studio BASIC full version, unlimited memory, (up to 3 PCs) 1x Software licence SPEED7 Studio PRO full version, unlimited memory, Motion-Control (up to 3 PCs)

1

2

3

RAM 64

RAM 128

RAM 256

RAM 512

RAM 1024

RAM 1536

Reference: SIEMENS

318

SIEMENS SIEMENS SIEMENS VIPA SIEMENS SIEMENS VIPA VIPA VIPA VIPA SIEMENS S7 1214 S7 318-2 S7 151-8 SLIO 014 S7 317-2FPN/DP S7 317-2PN/DP SLIO 015 315(7)SN/PN SLIO 013 SLIO 017 319-3PN/DP

CPU 013C 014 015 017 iMC7

PLC


7

SLIO– The smart I/O system CPU-Modules with Instruction Set S7-300®/S7-400® by SIEMENS

Memory extension

Fieldbus

SPEED7 BY VIPA – VERY FAST STEP®7 / TIA PROGRAMMABLE CPUs

EXTENSION OF FUNCTIONS VIA SD-CARD:

Features known from the SPEED7 CPUs 300S Series have been incorporated into the SLIO CPUs. Thus, memory management with flexible memory adaptation via the Memory Configuration Card (MCC), known from the SPEED7 CPUs of the 300 series, is present again in the SLIO CPUs, but has been updated. The VSC (VIPA Set Card) now allows for two hardware variants to generate a total of 24

CPU variants. Even in its basic configuration, without the optional VSC, both hardware variants already provide so much memory, that many of the common applications can run immediately. With the help of the VSC, the memory can be expanded and the PROFIBUS communication can be enabled in both basic CPUs. Only the SD card has to be plugged into the CPU of the selected

hardware variant. Then the additional features can be used immediately with the first operation. The VSC can also be used like any other standard SD card for storage of program and data. Programming is realized in the SIMATIC world, familiar to most users, i.e. concretely with STEP 7 or TIA Portal from Siemens.

M21-1BH00 179,-

M22-1BH00 179,-

M22-1HF10 118,-

M23-1BH00 179,-

M31-1CD50 364,-

M32-1BD40 364,-

M32-1BD70 364,-

M07-2BA00 118,-

M09-0CB00 118,-

955-0000000 57,- FSC-C000020 101,-

M13-CCF0000 364,- M13-CCF0001 393,-

PLC


8

All prices in euro excluding VAT

DIGITAL IN- & OUTPUT PRICE Order No.: Technical data in Euro

SM M21, 16 DI 24V DC

SM M22, 16 DO DC 24V, 0,5 A

SM M22, 8 DO 230V-AC / 2,5 A relay

SM M23, 8 DI 24DC, 8 DO 24V / 0,5 A

SM M31- 4x AI, 16Bit, 0/1...10 V +-10 V, 0/4...20 mA, R 0....3000 Ohm, RTD PT100, PT1000, NI100, NI1000, TC Typ J, K, N, R, S, T, B, C, E, L and U +-80 mV

SM M32 - 4x AO, 0/4...20mA

SM M32 - 4x AO, 0/1...10V_+-10V

POWER SUPPLY & EXTENSIONS PRICE Order No.: Technical data in Euro

Power Supply prim. AC 100-240VAC/sec. 24VDC, 1,5A IM M09, interface (2x RS485): MPI, PROFIBUS Slave, PtP: ASCII, 3964(R), USS Master, Modbus RTU M/S

VIPA SD card standard (empty), necessary for WebVisu

64kByte FSC extension code

MICRO PLC High Performance in Micro Dimension

The MICRO PLCs are distinguished by modern and functional design, very compact size, high performance and high channel density. The design of the MICRO PLC contains a new display and operating concept that enables the user to see the essential control information of the system at a glance. For this, display and operating elements deliberately concentrate on the essentials that are required in practice. The new „MICRO“ – as the name suggests – is extremely compact. With a width of less than 72 millimeters the VIPA MICRO PLC is up to 50% smaller than typical MICRO controllers. With 30 integrated digital and analog I/O channels on board it offers multifarious usage options as a stand-alone CPU too, and can be expanded with up to eight modules. Digital, analog and serial modules are available, more modules are constantly being expanded. Firm hold by spring terminal technology The connection plugs of the “MICRO” are individually detachable and therefore suitable for the pre-wiring in the series launch. Equipped with the convenient push-in technology they can be mounted and replaced quickly and easily, and without tools. In addition the plugs have spring terminals which not only allow easy wiring but also withstand every vibration. The allocation of the I/O display LEDs directly on the appropriate plug connection allows the user an easy and clear allocation of the channel status even at such a high channel density.

Interfaces, communication and memory A powerful PROFINET controller, a PN i-device and a PN MRP client are part of the basic equipment. The MICRO PLC M13C communicates via Ethernet TCP / IP and supports

S7TCP PG / OP protocol as well as ISOonTCP, ModbusTCPP and OPC UA-Server. The user has also the option of using the PROFIBUS slave function, PtP with ModbusRTU and MPI with an expansion module. Further functionalities of the SLIO system such as larger memory or field bus connections can be enabled if necessary using the multiple award-wining VIPA Set Card (VSC), which is unique in the world of automation. A special feature is a web server with a good equipped WebVisu, which can be configured via the Speed7 Studio.

With the new „MICRO“, VIPA Controls will be presenting a very compact and extremely fast MICRO control system at the SPS IPC Drives 2016. The design has a definite wow-factor and it opens up completely new paths in regards to operating and status display. Thus the MICRO PLC is the starting signal for the new VIPA controller generation.

Highlights • Up to date, pleasing, and functional design • Extremly compact construction size • Very high performance with SPEED7® technology • Fast backplane bus connection of 48 MBit/s • 30 integrated I/Os on board • CPU expandable up to max. 8 modules • Detachable connection plug with spring terminal and push-in technology • 2-port Ethernet switch • S7TCP, ISOonTCP, ModbusTCP, PROFINET-controller, -idevice, -MRP client, OPC UA-Server • Optional 2x RS485 module for MPI, PtP (ModbusRTU) and optional PROFIBUS slave • 64 up to 128 kByte remanent work memory and 128 kByte load memory • Full STEP7® compatible – supports IL, LAD, FBD, SCL and GRAPH7 • Programmable with SPEED7® Studio, SIEMENS SIMATIC manager and

SIEMENS TIA Portal • WebVisu on Board • Very good price / performance ratio

NEW from FW 3.

0

OPC U

A Serv

er

free o

f charg

e

CPU PRICE Order No.: Technical data in Euro

CPU M13C powered by SPEED7®, 64 - 128 kB onboard: 16 DE / 12 DA / 2 AE (12Bit/0-10V) / 4 counter / 2 PWM switch 2x RJ45: PG/OP Ethernet-Interface for S7TCP, ModbusTCP, OPC UA-Server, PROFINET Controler/i-Device for max. 4 connections, PtP: ASCII, STX/ETX, 3964(R), USS Master, Modbus Master/Slave, SD card slot, expandable up to max. 8 modules, programmable with SPEED7® Studio, WinPLC7, SIMATIC manager and SIEMENS TIA Portal HW-identification: 6ES7314-6EH04-0AB0 V3.3+6GK343-1EX30-0XE00

powered by SPEED7®, same as M13-CCF0000, additional: 2 AE (12Bit/0-10V/4-20mA)

PLC


9

MICRO PLC Technical data

Order Nr.: M13-CCF0000 Name CPU M13C Power supply Power supply (rated value) DC 24 V (20,4...28,8 VDC) Reverse polarity protection yes Current consumption (no-load operation) 120 mA, (rated value) 360mA Environmental conditions Operating temperature / Storage temperature 0 °C to 60 °C / -25 °C to 70 °C Inputs / Outputs Number of inputs 16, input delay adjustable:

3 μs – 15 ms / 0,5 ms – 15 ms Number of outputs 12 Output current at signal "1", rated value 0,5 A, trigger level: 1A Output delay „0“ to „1“ 2 μs to 30 μs /„1“ to „0“ 3 μs to 175 μs Analog inputs Number of inputs 2 Input voltage ranges 0 V ... +10 V / 100 kΩ Min. input resistance (voltage range) Resolution in bit 12 / successive approximation / Basic conversion time 0,5 ms

Counters Number of counters 4 / max. 100 kHz Counter width 32 Bit Address areas (I/O) Address area input I/O / output I/O 2048 / 2048 Byte Process image input / output max. 2048 / 2048 Byte Max. expansion digital inputs 144 / digital outputs 140 Point-to-Point protocole Protokocols ASCII, STX/ETX, 3964(R), USS Master,

Modbus Master / Slave Load and working memory Load memory, integrated 128 KB / max. 128 KB Work memory, integrated 64 KB / max. 128 KB Memory geteilt (50% Code / 50% Daten) Memory Card Slot SD / MMC-Card with max. 2 GB Command processing times Bit instructions min. 0,02 μs Word instruction min. 0,02 μs Double integer arithmetic min. 0,02 μs Floating-point arithmetic min. 0,12 μs Timers/Counters and their retentive characteristics Number of S7 counters / times 512 / 512 S7-counters / times remanence adjustable 0 up to 512 / 0 to 512 S7-counters / times preset remanence Z0 .. Z7 / no remanence Blocks Number of OBs 22 Number of FBs 1024 Number of FCs 1024 Time Real-time clock buffered yes Number of operating hours counter 8 Functionality RJ45 interfaces Type of interface / connector Ethernet 10/100 MBit Switch / 2 x RJ45 Number of connections max. 4 Ethernet communication via PG/OP Number of productive connections via PG/OP max. 2 Number of productive connections NetPro max. 2 S7-connections BSEND, BRCV, GET, PUT,

connection of active and passive data handling TCP-connections FETCH PASSIV, WRITE PASSIV,

connection of passive data handling ISO on TCP-connections (RFC 1006) FETCH PASSIV, WRITE PASSIV,

connection of passive data handling Ethernet open communication via PG/OP Number of configurable connections max. 2 ISO on TCP connections (RFC 1006) TSEND, TRCV, TCON, TDISCON

Dimensions periphery modul in mm

Dimensions CPU M13C in mm

Dimensions extension module EM M09 in mm

WebVisu via PG/OP Number of connections WebVisu max: 4 WebVisu supports HTTP / HTTPS Properties PROFINET IO controller via PG/OP Conformance Class PROFINET IO Number of PN IO Devices 8 Shared Device and MRP Client support yes Address range inputs / outputs max. 2 KB / max. 2 KB Update time 1 ms .. 512 ms Parallel operation as controller and I-Device yes Properties PROFINET I-Device via PG/OP I/O data range max. 768 Byte Update time 1 ms .. 512 ms Mode as Shared I-Device yes Management & diagnosis via PG/OP Protocols ICMP, DCP, DHCP, LLDP / SNMP, NTP Web based diagnosis yes

By using up to 8 peripheral modules, you can expand the internal I / O areas. The connection to the CPU is made

by plugging in on the right side of the CPU.

VIPA

013

-CCF

0R00

955-0000000 57,-

FSC-C000M00 225,- FSC-C000S00 84,- FSC-C000020 101,- FSC-C000M20 326,- FSC-C000S20 185,-

013-CCF0R00 557,- TIASTEP®7

PLC


10


Interfaces, communication and memory for the VIPA 013C A powerful PROFINET controller, a PN i-device and a PN MRP client are part of the basic equipment. The VIPA 013C PLC communicates via Ethernet TCP/IP and supports S7TCP PG/OP protocol as well as ISOonTCP, ModbusTCPP and OPC UA-Server. The user has also the option of using the integrated PtP-communication ports with ModbusRTU and MPI and optional the PROFIBUS slave function.

Further functionalities of the SLIO system such as larger memory or field bus connections can be enabled if necessary using the multiple award-wining VIPA Set Card (VSC), which is unique in the world of automation. A special feature is a web server with a good equipped WebVisu, which can be configured via the Speed7 Studio.

The extremely powerful VIPA 013C CPU is a completely new benchmark in the compact PLC sector. The family of SLIO CPUs is still one of the fastest S7 compatible CPUs on the market today. Equipped with the proven SPEED7 technology, which has been continuously developed for more than 15 years we offer our customers high performance and functionality which gives a high advantage in competition with a unique price / performance ratio.

Highlights • Up to date, pleasing, and functional design • Compact construction size • Very high performance with SPEED7® technology • Fast backplane bus connection of 48 MBit/s • 30 integrated I/Os on board • CPU expandable up to max. 8 modules • Detachable connection plug with spring terminal. • 2-port Ethernet switch • S7TCP, ISOonTCP, ModbusTCP, PROFINET-controller, -idevice, -MRP-client, OPC UA-Server • 2x RS485 ports for MPI, PtP (ModbusRTU) and

optional PROFIBUS DP-Master/Slave • 64 up to 128 kByte remanent work memory and 128 kByte load memory • Full STEP7® compatible – supports IL, LAD, FBD, SCL and GRAPH7 • Programmable with the free SPEED7® Studio LITE

with all SPEED7® Studio full versions, with SIEMENS SIMATIC manager and SIEMENS TIA Portal

• WebVisu on Board • Very good price / performance ratio

SPEED7 SLIO-CPUs PRICE Order No.: MEMORY & FUNCTION EXTENSIONS in Euro VIPA SD-Card standard (VSD), empty

FSC-EXTENSION CODE

PROFIBUS MASTER PROFIBUS SLAVE

64kByte PROFIBUS MASTER + 64kByte PROFIBUS SLAVE + 64kByte


SPEED7 SLIO-CPUs PRICE Order No.: Technical data in Euro

CPU 013-SPEED7 technology, DC 24V, incl. 64kByte (up to 128kByte), NVS-RAM, MPI-interface, SD-Slot, clock, 16 DI, 12 DO, 24 VDC/0,5A, 2 AI, 4x counter (100kHz), 2x PWM (20 kHz), switch 2x RJ45: PG/OP Ethernet-Interface for S7TCP, ModbusTCP, OPC UA-Server, PROFINET Controler / i-Device for max. 4 connections, RS485 interface with library for ASCII, STX/ETX, USS, 3964(R), ModbusRTU Master/Slave or MPI (switchable), optional PROFIBUS-DP-Master/Slave, 64 SLIO-units per line. HW identification: 6ES7314C-2 PN/DP + 6GK343-1EX30-0XE00

NEW from FW 3.

0

OPC U

A Serv

er

free o

f charg

e

PLC


11

SLIO CPU 013C Technical data

Order Nr.: VIPA 013-CCF0R00 Name CPU 013C Power supply Power supply (rated value) DC 24 V (20,4...28,8 VDC) Reverse polarity protection yes Current consumption (no-load operation) 120 mA, (rated value) 360mA Environmental conditions Operating temperature / Storage temperature 0 °C to 60 °C / -25 °C to 70 °C Inputs / Outputs Number of inputs 16, input delay adjustable:

3 μs – 15 ms / 0,5 ms – 15 ms Number of outputs 12 Output current at signal "1", rated value 0,5 A, trigger level: 1A Output delay „0“ to „1“ 2 μs to 30 μs /„1“ to „0“ 3 μs to 175 μs Analog inputs Number of inputs 2 Input voltage ranges 0 V ... +10 V / 100 kΩ Min. input resistance (voltage range) Resolution in bit 12 / successive approximation Basic conversion time 0,5 ms

Counters Number of counters 4 / max. 100 kHz Counter width 32 Bit Address areas (I/O) Address area input I/O / output I/O 2048 / 2048 Byte Process image input / output max. 2048 / 2048 Byte Max. expansion digital inputs 144 / digital outputs 140 Point-to-Point protocole Protokocols ASCII, STX/ETX, 3964(R), USS Master,

Modbus Master / Slave Load and working memory Load memory, integrated 128 KB / max. 128 KB Work memory, integrated 64 KB / max. 128 KB Memory geteilt (50% Code / 50% Daten) Memory Card Slot SD / MMC-Card with max. 2 GB Command processing times Bit instructions min. 0,02 μs Word instruction min. 0,02 μs Double integer arithmetic min. 0,02 μs Floating-point arithmetic min. 0,12 μs Timers/Counters and their retentive characteristics Number of S7 counters / times 512 / 512 S7-counters / times remanence adjustable 0 up to 512 / 0 to 512 S7-counters / times preset remanence Z0 .. Z7 / no remanence Blocks Number of OBs 22 Number of FBs 1024 Number of FCs 1024 Time Real-time clock buffered yes Number of operating hours counter 8 Functionality RJ45 interfaces Type of interface / connector Ethernet 10/100 MBit Switch / 2 x RJ45 Number of connections max. 4 Ethernet communication via PG/OP Number of productive connections via PG/OP max. 2 Number of productive connections NetPro max. 2 S7-connections BSEND, BRCV, GET, PUT,

connection of active and passive data handling TCP-connections FETCH PASSIV, WRITE PASSIV,

connection of passive data handling ISO on TCP-connections (RFC 1006) FETCH PASSIV, WRITE PASSIV,

connection of passive data handling Ethernet open communication via PG/OP Number of configurable connections max. 2 ISO on TCP connections (RFC 1006) TSEND, TRCV, TCON, TDISCON


Dimensions CPU 013C in mm

Properties RS485-Ports: MPI / PtP: yes DP-Master / Slave: optional Max. Connections/Slaves: 32 PG/OP communication: yes Transmission speed MPI/DP: 9,6 kbit/s - 12 Mbit/s DP Adressrange inputs / outputs, max. 2 KB / max. 2 KB DP Transfer range inputs / outputs per Slave, max. 244 Byte / max. 244 Byte PtP Transmission speed: 1,2 kbit/s - 115,5 kbit/s WebVisu via PG/OP Number of connections WebVisu max: 4 WebVisu supports HTTP / HTTPS Properties PROFINET IO controller via PG/OP Conformance Class PROFINET IO Number of PN IO Devices 8 Shared Device and MRP Client support yes Address range inputs / outputs max. 2 KB / max. 2 KB Update time 1 ms .. 512 ms Parallel operation as controller and I-Device yes Properties PROFINET I-Device via PG/OP I/O data range max. 768 Byte Update time 1 ms .. 512 ms Mode as Shared I-Device yes Management & diagnosis via PG/OP Protocols ICMP, DCP, DHCP, LLDP / SNMP, NTP Web based diagnosis yes

By using up to 64 peripheral modules, you can expand the internal I / O areas. The connection to the CPU is made

by plugging in on the right side of the CPU.

TIASTEP®7

014-CEF0R01

500,-

015-CEFPR01

725,-

017-CEFPR00

1.118,-

019-CEFPM00

2.239,-

955-0000000 57,-

FSC-C000M00 225,-

FSC-C000S00 84,-

FSC-C000020 101,-

FSC-C000M20 326,-

FSC-C000S20 185,-

FSC-C000030 152,-

FSC-C000M30 376,-

FSC-C000S30 236,-

FSC-C000040 202,-

FSC-C000M40 427,-

FSC-C000S40 286,-

FSC-C0ME040 387,-

FSC-C0NE040 668,-

FSC-C0PE040 1.340,-

FSC-C000050 383,-

FSC-C000M50 605,-

FSC-C000060 605,-

FSC-C000M60 830,-

FSC-C000070 830,-

FSC-C000M70 1.055,-

VIPA

014

-CEF

0R01

VIPA

015

-CEF

PR01

TIASTEP®7

VIPA

019

-CEF

PM00

TIASTEP®7

TIASTEP®7

PLC


12



SPEED7 SLIO-CPUs PRICE Order No.: Technical data in Euro

CPU 014-SPEED7 technology, DC 24V, incl. 128kByte bis 256kByte, NVS-RAM, MPI-interface, SD-Slot, clock, PG/OP Ethernet-Interface for S7TCP, ModbusTCP, PROFINET Controler/ i-Device for max. 8 connections, OPC-UA Server, RS485 interface with library for ASCII, STX/ETX, USS, 3964R, ModbusRTU Master/Slave or MPI (switchable), optional PROFIBUS-DP-Master/Slave, 64 SLIO-units per line, WebVisu compatible ATVISE on board. HW identification: 6ES7315-2EH14-0AB0 V3.2 + 6GK343-1EX30-0XE00 V3.0 CPU 015-SPEED7 technology, DC 24V, incl. 256kByte (up to 512kByte), NVS-RAM, MPI-interface, SD-Slot, clock, PG/OP Ethernet-Interface for S7TCP, ModbusTCP, PROFINET Controler/i-Device for max. 8 conn., OPC-UA Server, RS485 interface with library for ASCII, STX/ETX, USS, 3964R, ModbusRTU Master/Slave or MPI (switchable), integr. CP343 for ModbusTCP Master/Slave, RFC1006, TCP/IP and S7 communication for 8 conn., PROFINET Controler/i-Device & opt. PROFIBUS-DP-Master/Slave, 64 SLIO-units per line, WebVisu compatible ATVISE on board. HW identification: 6ES7315-2EH14-0AB0 V3.2+ 6GK343-1EX30-0XE00 V3.0 CPU 017-SPEED7 technology, DC 24V, incl. 512kByte (up to 2MByte), NVS-RAM, MPI-interface, SD-Slot, clock, PG/OP Ethernet-Interface for S7TCP, ModbusTCP, PROFINET Controler/i-Device for max. 8 connections, OPC-UA Server, RS485 interface with library for ASCII, STX/ETX, USS, 3964R, ModbusRTU Master/Slave or MPI (switchable), integrated CP343 for ModbusTCP Master/ Slave, RFC1006, TCP/IP and S7 communication for 8 connections, PROFINET Controler/ i-Device & optional PROFIBUS-DP-Master/Slave, 64 SLIO-units per line, WebVisu compatible ATVISE on board. HW identification: 6ES7317-2EK14-0AB0 V3.2+ 6GK343-1EX30-0XE00 V3.0 CPU 019-SPEED7 technology, DC 24V, incl. 6 Mbyte (3MB Code / 3MB Data), NVS-RAM, MPI-interface, SD-Slot, clock, PG/OP Ethernet-Interface for S7TCP, ModbusTCP, PROFINET Controler/ i-Device for max. 8 connections, OPC-UA Server, RS485 interface with library for ASCII, STX/ETX, USS, 3964R, ModbusRTU Master/Slave or MPI (switchable), integrated CP343 for ModbusTCP Master/ Slave, RFC1006, TCP/IP and S7 communication for 8 connections, PROFINET Controler/ i-Device and PROFIBUS-DP-Master/Slave included , 64 SLIO-units per line, WebVisu compatible ATVISE on board. HW identification: 6ES7317-2EK14-0AB0 V3.2+ 6GK343-1EX30-0XE00 V3.0

SPEED7 SLIO-CPUs PRICE Order No.: MEMORY & FUNCTION EXTENSIONS in Euro VIPA SD-Card standard (VSD), empty

FSC-EXTENSION CODE

PROFIBUS MASTER

PROFIBUS SLAVE

64kByte

PROFIBUS MASTER + 64kByte

PROFIBUS SLAVE + 64kByte

128kByte



256kByte



EtherCAT MASTER + 256kByte + MC 4 axes



512kByte

ROFIBUS MASTER + 512kByte

1024kByte


1536kByte


PLC


13

SLIO CPU 014 | 015 | 017 | 019 Technical data

Order Nr.: VIPA 014-CEF0R01 | 015-CEFPR01 | 017-CEFPR01 | 019-CEFPMOO Name CPU 014 | 015 | 017 I 019 Power supply Power supply (rated value) DC 24 V (20,4...28,8 VDC) Reverse polarity protection yes Current consumption (no-load operation) 120 | 150 | 175 mA, rated value: 1 A | 1,1 A | 1,1 A Environmental conditions Operating temperature/Storage temperature 0 °C to 60 °C / -25 °C to 70 °C Address areas (I/O) Address area input I/O / output I/O 2048 /2048 | 2048 /2048 | 8192 /8192 Byte Process image input / output max. 2048 /2048 | 2048 /2048 | 8192 /8192 Byte Digital input / output 16384 /16384 | 16384 /16384 | 65536 /65536 Analog input / output 1024 /1024 | 1024 /1024 | 4096 /4096 Hardware configuration Racks max.: 5 Modules per rack, max.: total max. 64 minus number line extensions Operable function modules: 64 Operable communication modules PtP: 64

Point-to-Point protocole Protokocols ASCII, STX/ETX, 3964(R), USS Master,

Modbus Master / Slave

Load and working memory Load memory, integrated 256 KB | 512 KB | 2 MB | 6 MB Work memory, integrated / max. 128 / 256 KB | 256/512 KB | 512KB/2 MB | 6 MB/6 MB Memory devided (50% program / 50% data) Memory Card Slot SD / MMC-Card with max. 2 GB

Command processing times Bit instructions min. 0,02 μs | 0,01 μs | 0,01 μs Word instruction min. 0,02 μs | 0,01 μs | 0,01 μs Double integer arithmetic min. 0,02 μs | 0,01 μs | 0,01 μs Floating-point arithmetic min. 0,12 μs | 0,06 μs | 0,06 μs

Timers / Counters / Flags and their retentive characteristics Number of S7 counters / times 512 /512 | 512 /512 | 2048 /2048 S7-counters / times remanence adjustable 0 up to 512 | 512 | 2048 / 0 up to 512 | 512 | 2048 S7-counters / times preset remanence Z0 .. Z7 / no remanence Number of flags / retentive 8192 | 8192 | 16384 Byte / 0 up to 8192 | 8192 | 16384 Byte

Blocks Number of OBs 22 Number of FBs 1024 | 4096 | 4096 | 8192 / max. 64 kB per FB Number of FCs 1024 | 4096 | 4096 | 8192 / max. 64 kB per FC Number of DBs 1024 | 4096 | 4096 | 8192 / max. 64 kB per DB

Time Real-time clock buffered yes Number of operating hours counter 8

Functionality RJ45 interfaces Type of interface / connector Ethernet 10/100 MBit Switch 1+1 | 2+2 | 2+2 x RJ45 Number of connections max. 4 | 12 | 24

Ethernet communication via PG / OP Number of productive connections via PG/OP max. 4 | 8 | 8 | 32 7-connections BSEND, BRCV, GET, PUT, TCP-connections FETCH PASSIV, WRITE PASSIV, ISO on TCP connections (RFC 1006) FETCH PASSIV, WRITE PASSIV, OPC UA connections 6

Ethernet open communication via PG / OP Number of configurable connections max. 4 | 4 | 4 | 68 Number of productive connections by NetPro TSEND, TRCV, TCON, TDISCON; TUSEND, TURCV

Ethernet open communication via CP Number of configurable connections max. 0 | 8 | 24 | 68 ISO on TCP connections (RFC 1006) max. 0 | 8 | 16 | 16 OPC UA connections 6


Dimensions CPU 014 / 015 / 017 / 019 in mm

Properties RS485-Ports: MPI / PtP: yes DP-Master / Slave: optional / 019: yes Max. Connections / Slaves: 32 / 124 PG / OP communication: yes Transmission speed MPI / DP: 9,6 kbit/s - 12 Mbit/s DP Adressrange inputs / outputs, max. 2 KB / max. 2 KB DP Transfer range inputs / outputs per Slave: max. 244 Byte / max. 244 Byte PtP Transmission speed: 1,2 kbit/s - 115,5 kbit/s WebVisu via PG/OP Number of connections WebVisu max: 4 WebVisu supports HTTP / HTTPS Properties PROFINET IO controller via PG / OP / CP Conformance Class PROFINET IO Number of PN IO Devices via PG/OP: 8 | 8 | 8 / via CP: 0 | 128 | 128 Shared Device and MRP Client support yes Address range inputs / outputs 2048 / 2048 / 4096 / 6144 Byte PN Transfer range inputs / outputs per Slave max. 768 Byte / max. 768 Byte Update time 1 ms .. 512 ms Parallel operation as controller and I-Device yes Properties PROFINET I-Device via PG / OP / CP I/O data range max. 768 Byte Update time 1 ms .. 512 ms Mode as Shared I-Device yes Management & diagnosis via PG/OP Protocols ICMP, DCP, DHCP, LLDP / SNMP, NTP Web based diagnosis yes

PLCSLIO– The smart I/O system

Bus Terminals


INTERFACE-MODULES (IM) The space-saving Interface-Module represents the interface between process level and bus system. All control signals are transmitted to the Electronic Module through the internal backplane bus.

• Supports various fieldbus systems • Exchangeable Power Module, easy-to-maintain • Functional DIP-switch for address setting for PROFIBUS-DP

and CANopen with transparent cover • IP addressing in clear text on the front • Potential decoupling between fieldbus and input/output level • Up to 64 Signal and Function Modules per Interface Module

SIGNAL-MODULES (SM) Electronic Module for connection of sensors and actuators, registration of digital and analog signals in and out of the process. • Direct allocation and monitoring of channel states via status LEDs • Secure and time-saving installation due to terminal assignment on the

module • Item designation will remain unchanged in case of module exchange • Individual labelins of channels with blank strips FUNCTION-MODULES (FM) Electronic Module for realization of automation requirements, e.g. fast counting. For measuring and positioning the following function modules will complement the SLIO® System in the future:

• SSI-Module • Counter-Module • Others in preparation POWER-MODULES (PM) Power Module for refreshing of backplane bus power. The double-component-design ensures easy maintenance due to the separation of electronics from the Terminal Module.

• Decoupling of potential groups • Voltage supply on sensor/actuator level • Mounting security due to reverse-connect and overvoltage protection EASY INSTALLATION AND MAINTENANCE • Two-component modules with Terminal Module and Electronic Module

for easy maintenance • Easy mounting due to plug-in mechanism • Click-connection for fast mounting of shield connection • Protection against wrong combination of Terminal- and

Electronic-Modules per encoding

CLEVER AND USER-FRIENDLY LABELLING • Status-LEDs with direct allocation on the labelins strip • Terminal assignment and connection diagrams on each module • Item designation will remain unchanged in case of module exchange • Blank strips for individual labeling of modules

CLEAR STATUS MONITORING AND DIAGNOSIS • Indication of diagnosis and channel states via LEDs • Clear allocation and indication of channel states •

Secure and time-saving installation and maintenance through terminal

assignment printed on the module PERFORMANCE-ORIENTED BACKPLANE BUS • One Terminal Module for all Signal and Function Modules • Transmission rate 48Mbit/s • Fast response time of 20μs upwards • Detailed diagnosis of each Electronic Module in the system SPACE AND TIME-SAVING CONNECTION TECHNOLOGY • Space-saving staircase-shaped wiring with cage clamps • Quick pre-wiring due to separate installation level • Easy module exchange due to standing wiring • High modularity due to 2, 4 and 8 channel modules

Demand for a more compact and flexible automation solutions with a reasonable price-performance ratio has been constantly increasing. With the development of the completely new I/O system SLIO®, VIPA is setting a new standard in the automation sector. The VIPA I/O system SLIO combines high functionality with an intelligent mechanical concept and an extremely compact design. SLIO® is a synonym for slice-I/O. With its very compact design, the system can be set-up “step by step” to exactly meet the requirements of the application. The Interface Modules (IM) for PROFIBUS-DP, CANopen, PROFINET, EtherCAT and Modbus can support up to 64 Electronic Modules (EM). The Power Modules (PM), which are contrasting in color to Signal Modules (SM) and Function Modules (FM), supply voltage to the Electronic Modules. Decoupled potential groups can be defined if required. The Electronic Modules are connected to the Terminal

ModuleTM using a secure plug-in mechanism. The Terminal Module is comprised of a clamp, connection of Electronic Modules and mechanical bus connector. Therefore, if maintenance or repair are required, only the Electronic Module will have to be exchanged by simply pulling it out of the Terminal Module. Wiring and mounting on the 35mm DIN rail will remain unchanged. The staircase-shaped cage, which clamps on the Terminal Module offers fast, clear, and secure wiring. With the integrated status-LEDs and the labeling strip on the front, an exact state monitoring of channels on the Electronic Module is possible. The new backplane bus system with a transmission rate of 48Mbit/s offers very short response times with a signal processing of less than 20μs. SLIO® is one of the most powerful and cost-effective decentralized systems available in the market.


1 DC 24V for power sec tion supply I/O area (max. 10A via 0AA00/1AB00)

2 DC 24V for electronic

power supply bus coupler

3 DC 24V for power

section supply I/O area (max. 4A via 1AB10)

4 DC 24V for electronic

power supply bus coupler

14

050-1BA00 190,-

050-1BA10 190,-

050-1BB00 190,-

050-1BB30 143,-

050-1BB40 190,-

050-1BS00 202,-

054-1BA00 276,-

054-1CB00 276,-

054-1DA00 229,-

040-1BA00 234,-

040-1CA00 234,-

053-1CA00 154,-

053-1DN00 154,-

053-1DP00 154,-

053-1PN01 229,-

053-1EC01 152,-

053-1MT01 154,-

053-1IP01 192,-

060-1AA00 114,-

061-1BA00 183,-

001-1BA00 19,-

001-1BA10 19,-

001-1BA20 19,-

950-0KD30 19,-

290-1AF00 63,-

290-1AF30 21,-

000-0AB00 11,-007-1AB00 19,-

007-1AB10 126,-

FUNCTIONS-MODULES INCL. 001-0AA00 TERMINAL MODULE PRICE

Order No.: Name / Technical data in Euro

FM 050 - Counter module / Counter 1x32Bit (AB), DI 24VDC, up to 100kHz, DO 1x 24VDC/0,5A, Gate-, Latch-, Reset-Connector, Alarm, Diagnose

FM 050 - Counter module/Counter 1x32Bit (AB), DI 5VDC, up to 500kHz Differential signal, Reset-Connector, Alarm, Diagnose FM 050 - Counter module/Counter 2x32Bit (AB), DI 24VDC, up to 400kHz Alarm, Diagnose

FM 050 - ECO Counter module/Counter 2x32Bit (AB), DI 24VDC, up to 100kHz

FM 050 - Counter module/Frequenz 2x24Bit (AB), DI 24VDC, up to 600kHz

FM 050S - SSI-Modul / 1xSSI, RS422, 24/32 Bit, 100/300/600kBit/s

MOTION-MODULES INCL. 001-0AA00 TERMINAL MODULE PRICE


FM 054 - stepper module / 1-channel with feedback, 2 outputs 24VDC/1,5A, 2 inputs 24 VDC, current control frequency 32 kHz, step pattern 64-times microstepping

FM 054 - DC-motor module / 2-channel with feedback, 2 outputs 24VDC for 2x 1,5A DC motors, 2 inputs 24 VDC, PWM clock frequency 32 kHz

FM 054 - Pulse Train output module / 1-channel RS422 with feedback, 2 outputs A/B phase 24 VDC, 2 inputs VDC, 0 to 1.000 kHz

COMMUNICATION-MODULES INCL. 001-0AA00 TERMINAL MODULE PRICE


CP 040 - Communication processor, RS232 interface Communication: ASCII, 3946R, ModbusRTU/ASCII (Master/Slave, short/long) lenth of telegram: max. 250Byte, up to 250 telegrams receive-/send buffer: 1024Byte

CP 040 - Communication processor, RS422/485 interface, Communication: ASCII, 3946R, ModbusRTU/ASCII (Master/Slave, short/long) lenth of telegram: max. 250Byte, up to 250 telegrams receive-/send buffer: 1024Byte

FUNCTION-MODULES (FM) Electronic Module for realization of automation requirements, e.g. fast counting. For measuring and positioning the following function modules will complement the SLIO® system in future:

• SSI-Module

• Counter-Module

• Others in preparation

SLIO– The smart I/O system

Bus Terminals


INTERFACE-MODULES (IM) The space-saving Interface-Module represents the interface between process level and bus system. All control signals are transmitted to the Electronic Module through the internal backplane bus.

• Supports various fieldbus systems

• Exchangeable Power Module, easy to maintain

• Functional DIP-switch for address setting for PROFIBUS-DP, PROFINET and CANopen with transparent cover

• IP addressing in clear text on the front

• Potential decoupled between fieldbus and input/output level

• Up to 64 Signal and Function Modules per Interface Module

INTERFACE-MODULES INCL. 007-0AA00 POWER-MODULE PRICE


IM 053CAN / CANopen-Slave, max. PB (parameterbytes): 128

IM 053DN / DeviceNet-Slave, max. PB (parameterbytes): 256

IM 053DP / PROFIBUS-DP-Slave, max. PB (parameterbytes): 244

IM 053PN / PROFINET-IO slave transfer rate 100MBd, PB: 512

IM 053EC / EtherCAT-slave transfer rate 100MBd, PB: 4kB

IM 053NET / Modbus-/TCP/IP slave, adjustable I/O cycle 0.5..4msec

IM 053IP / Ethernet/IP-Slave, PB (Parameterbytes): 512

IM 060 / Line Extension, Master

IM 061 / Line Extension, Slave

POTENTIAL DISTRIBUT0R-MODULES MAX. TERMINAL CURRENT 10A PRICE

Order No.: Name / Technical data in Euro Potential distributor module 24V/8xDC +24V clamps

Potential distributor module 24V/8xDC 0V clamps

Potential distributor module 24V/4xDC +24V and 4xDC 0V terminals POTENTIAL DISTRIBUTOR-MODULES PRICE Order No.: Name in Euro

SLIO Line Extension Cable, length: 2m, 2x RJ45

35 mm Alu DIN-Profile Rail, Length: 2000mm

35 mm Alu DIN-Profile Rail, Length: 530mm

SLIO Shield Bus Carrier, 10 pieces

POWER-MODULES INCL. 001-0AA00 TERMINAL-MODULE PRICE


Power Supply connection module, DC 24V, max. 10A

Power Supply connection module, DC 24V, max. 4A with integrated power supply 5V/2A for the internal electronics

PLC


15

021-1BB00 26,-

021-1BD00 32,-

021-1BD40 34,-

021-1BD50 34,-

021-1BF00 49,-

021-1BF01 55,-

021-1BF50 49,-

021-1DF00 76,-

021-1BB10 91,-

021-1BD10 150,-

021-1SD00 185,-

022-1SD00 210,-

021-1BD70 166,-

022-1BD70 185,-

022-1BB00 32,-

022-1HB10 47,-

022-1HD10 72,-

022-1BD00 42,-

022-1BD50 42,-

022-1BD20 53,-

022-1BF00 53,-

022-1BF50 53,-

022-1DF00 82,-

022-1BB90 147,-

SIGNAL-MODULES DIGITAL INPUT INCL. 001-0AA00 TERMINAL MODULE PRICE


SM 021 - Digital input / DI 2xDC 24V


SM 021 - Digital input / DI 4xDC 24V (4x2/3--wire)

SM 021 - Digital input / DI 4xDC 24V, NPN


SM 021 - Digital input / DI 8xDC 24V, 0,5 ms

SM 021 - Digital input / DI 8xDC 24V, NPN

SM 021 - Digital input / DI 8xDC 24V, wiring diagnosis

Digital input SM 021, DI 2 x speed inputs, input filter time delay parameterized 2μs ... 4ms, PB: 9

Digital input SM 021, DI 4 x fast inputs, input filter time delay parameterized 2μs ... 4ms, PB: 11

SIGNAL-MODULES DIGITAL OUTPUT INCL. 001-0AA00 TERMINAL MODULE PRICE


SM 022 - Digital output / DO 2xDC 24V, 0,5A

SM 022 - Digital output / DO 2xDC 30V/AC 230V, 3A relays, potential decoupled per channel

SM 022 - Digital output / DO 4xDC 30V/AC 230V, 1,8A relays, potential decoupled per channel


SM 022 - Digital output / DO 4xDC 24V, 0,5A, NPN

SM 022 - Digital output / DO 4xDC 24V, 2A


SM 022 - Digital output / DO 8xDC 24V, 0,5A, NPN

SM 022 - Digital output / DI 8xDC 24V, 0,5A, wiring diagnosis

SM 022 - PWM - Digital output / DO 2xDC 24V, 0,5A, max. 40kHz, PB: 12

SIGNAL-MODULES (SM) Electronic Module for connection of sensors and actuators, registration of digital and analog signals in and out of the process.

• Direct allocation and monitoring of channel status via state LEDs

• Secure and time-saving installation due to terminal assignment on the module

• Item designation will remain unchanged in case of module exchange

• Individual labeling of channels with blank strips


PLC



Bus Terminals

SPACE AND TIME-SAVING CONNECTION TECHNOLOGY • Space-saving staircase-shaped wiring with cage clamps • Quick pre-wiring due to separate installation level • Easy module exchange due to standing wiring • High modularity due to 2, 4 and 8 channel modules

THE SAFETY MODULES FOR SLIO: • 4-channel or 2-channel inputs and outputs for higher Safety

requirements (SIL3) • Digital signals: 24 V • Used Safety protocol: PROFIsafe for PROFIBUS and PROFINET • Up to 4095 Safety modules in an equipment possibly • Safe parameters: Input delay, change-over between one and two channel analysis, channel activation a.s.o. • Response times <10 ms • Registration to SIL3 (Safety Integrity level) and

PL e (performance level)

SAFETY-MODULES INCL. 001-0AA00 TERMINAL MODULE PRICE


SM 021 - SAFETY Digital input / DE 4xDC 24V, PB: 44

SM 022 - SAFETY Digital output / DA 4xDC 24V/0,5A, PB: 44

16

ETS SIGNAL-MODULES DIGITAL INCL. 001-0AA00 TERMINAL MODULE PRICE


ETS Digital input SM 021, DI 4 x 24VDC, PB: 12 ETS-Buffer: 15 time stamps, Time resolution: 1μsec

ETS Digital output SM 022, DO 4 x 24VDC/0,5A, PB: 6 ETS-Buffer: 15 time stamps, Time resolution: 1μsec

ETS TIMESTAMP-SYSTEM There are digital input and output modules with order memory (FIFO) available to buffer the signal edges. These terminals are marked with the abbreviation ETS (Edge Timestamp System). SLIO ETS offers a temporary signifi-cantly improved exactness at the μs area for all supported fieldbus systems.

031-1BB10 143,-

031-1BB30 143,-

031-1BB40 143,-

031-1BB60 143,-

031-1BB70 143,-

031-1BD30 154,-

031-1BD40 154,-

031-1BD70 154,-

031-1BF60 185,-

031-1BF74 185,-

032-1BB30 152,-

032-1BB40 152,-

032-1BB70 152,-

032-1BD30 162,-

032-1BD40 162,-

032-1BD70 162,-

032-1CB30 181,-

032-1CB40 181,-

032-1CB70 181,-

032-1CD30 192,-

032-1CD40 192,-

032-1CD70 192,-

031-1CB30 166,-

031-1CB40 166,-

031-1CB70 166,-

031-1CD30 177,-

031-1CD35 177,-

031-1CD40 177,-

031-1CD45 177,-

031-1CD70 177,-

031-1BD80 217,-

031-1LD80 217,-

031-1BB90 185,-

031-1LB90 185,-

031-1CA20 265,-


PLC


SIGNAL-MODULES ANALOG INPUT 12BIT INCL. 001-0AA00 TERMINAL MODULE PRICE


SM 031 - Analog input / AI 2x12Bit, (0) 4 - 20mA supply 2x 35mA for 2x 2-wire sensors integrated, PB: 15

SM 031 - Analog input / AI 2x12Bit, 0 - 10V, PB: 6

SM 031 - Analog input / AI 2x12Bit, (0) 4 - 20mA, PB: 6

SM 031 - Analog input / AI 2x12Bit, (0) 4 - 20mA, sensor, PB: 6

SM 031 - Analog input / AI 2x12Bit, -10V ... +10V, PB: 6



SM 031 - Analoge input / AI 4x12Bit, -10V ... +10V, PB: 8


SM 031 - Analoge input / AI 8x12Bit, -10V ... +10V, PB: 10

SIGNAL-MODULES ANALOG OUTPUT 12BIT INCL. 001-0AA00 TERMINAL MODULE PRICE


SM 032 - Analog output / AO 2x12Bit, 0 - 10V, PB: 8

SM 032 - Analog output / AO 2x12Bit, (0) 4 - 20mA, PB: 8

SM 032 - Analog output / AO 2x12Bit, -10V ... +10V, PB: 8



SM 032 - Analog output / AO 4x12Bit, -10V ... +10V, PB: 10

SIGNAL-MODULES ANALOG INPUT 16BIT INCL. 001-0AA00 TERMINAL MODULE PRICE










SM 031 - Analog input / AI 4x16Bit, R, RTD (2x3/4-wire), PT100/PT1000, Ni100/Ni1000, 0 - 3000 Ohm, PB: 34

SM 031 - Analog input / AI 4x16Bit, R, RTD (2x3/4-wire), PT100/PT1000, Ni100/Ni1000, 0 - 3000 Ohm, PB: 12

SM 031 - Analog input, AI 2x16Bit, TC (-80mV..+80mV), ThermocouplerTyp B, C, E, J, K, L, N, R, S, T, PB: 22 Terminal Module 001-0AA20 with temperature compensation included

SM 031 - Analog input, AI 2x16Bit, TC (-80mV..+80mV), ThermocouplerTyp B, C, E, J, K, L, N, R, S, T, PB: 10 Terminal Module 001-0AA20 with temperature compensation included

SM 031 - DMS-Module, single channel, full bridge, 16 (24) Bit auto/self calibration, parallel operation of load cells, onboard power supply 2,5V, 5V, 7,5V, 10V, 12V

SIGNAL-MODULES ANALOG OUTPUT 16BIT INCL. 001-0AA00 TERMINAL MODULE PRICE








SLIO– The smart I/O system Bus Terminals

17

SIGNAL MODULES ANALOG Signal modules (SM) to connecting sensors and actuators are the interfaces of the system to the process. Analog signal modules acquire the analog control signals (e.g. measurement data) to and out of the process level. Depending on the application and type the control signals are acquired from the process level and converted into interpretable signals for controlling. Analog output modules convert the internal control signals into signals suitable for the process level.

A variety of different analog signal modules accurately provide the inputs and outputs that are required for each task. The analog modules differ in the number of channels, voltage and current ranges, isolation, and diagnostic and alarm capability. CHARACTERISTICS • 2 or 4 channel with 12 bit or 16 bit resolution • Functions of the inputs / outputs programmable • Most various assemblies, suitable for measuring

transducers (current/voltage, resistance or temperature sensors)

• Direct mapping and readability of the channel conditions via status LEDs

• Safe and time-saving installation by the terminal assignment mounted on the module

• When changing the module equipment identification (BMK) is retained on the TM

• Individual single-channel lettering on insertion strip

054-1BA00 276,-

054-1CB00 276,-

054-1DA00 229,-

031-1CA20 265,-

031-1PA10 265,-

RS422

021-1BH00 74,-

022-1BH00 87,-

PLC


18



Bus Terminals

MOTION-MODULES INCL. 001-0AA00 TERMINAL MODULE PRICE


FM 054 - stepper module / 1-channel with feedback, 2 outputs 24VDC/1,5A, 2 inputs 24 VDC, current control frequency 32 kHz, step pattern 64-times microstepping

FM 054 - DC-motor module / 2-channel with feedback, 2 outputs 24VDC for 2x 1,5A DC motors, 2 inputs 24 VDC, PWM clock frequency 32 kHz

FM 054 - Pulse Train Output Module / 1-channel RS422 with feedback, 2 outputs A/B phase 24 VDC, 2 inputs VDC, 0 to 1.000 kHz

DMS-MODULE INCL. 001-0AA00 TERMINAL MODULE PRICE


SM 031 - DMS-Module, single channel, full bridge, 16 (24) Bit auto/self calibration, parallel operation of load cells, onboard power supply 2,5V, 5V, 7,5V, 10V, 12V

ENERGY MEASURMENT-MODULE INCL. 001-0AA00 TERMINAL MODULE PRICE


SM 031 - Energymeasure-Module AI 1/3Ph 230/400V 1/5A resolution measured value 24 bit, avialable measurement: active energy, temperature, frequency, voltage RMS, current RMS, active power, reactive power, apparent power, cos phi, harmonic voltage RMS, harmonic current RMS

SLIO DMS-Modules The SLIO DMS modules allows direct connection of a resistor full bridge (DMS) or load cell in the 4- or 6-wire connection. Power supply already integrated. Typical fields of applications • Filling level monitoring of silotanks

and bunkers • Measuring and determination of rope

and crane loads • Force measuring, Container scales,

Platform scales, Crane scales

STEPPER Module

Operating types • Reference • Positioning • Speed control

PulseTrain Module

Operating types • Reference • Positioning • Speed control

DC-Motor Module

Operating types • Reference • Positioning • Speed/torque control

SLIO Energy Measurment-Module The module allows the measurement of electric data for counting energy and power measurement. Here, the voltage measurement of each phase is directly measured and the current is measured indirectly via current transformers. In consideration of the permissible total current, you can also perform an energy measurement on devices, which are within the same phase. • 3-phase and neutral wires 230/400V 1/5A • Retentive storage of the energy values • Diagnostic function • Resolution of the measured value 24bit • The following measurements can be found in 4-quadrant

operation: – Voltage, current – Electrical power – Electrical work – Harmonics – Phase shift cos phi – Frequency

SIGNAL MODULES DIGITAL & ANALOG 16 CONNECTIONS INCL. TERMINAL MODULE PRICE


SM 021 - Digitale Input / DI 16x DC 24V

SM 022 - Digitale Output / DO 16x DC 24V, 0,5A

SIGNAL Modules with 16 connections

VIPA 953-1LE00 110,- VIPA 953-1LF00 164,- VIPA 953-1LG00 242,- VIPA 953-1LH00 345,- VIPA 953-1LJ00 544,- VIPA 953-1LK00 626,- VIPA 953-1LL00 1.141,- VIPA 953-1LM00 1.683,- VIPA 953-1LP00 2.497,-

VIPA

312

SCVI

PA 3

13SC

VIPA

313

SC/D

PMVI

PA 3

14SC

/DPM

VIPA 953-0KX10 € 131,-

VIPA 312-5BE23 591,-

VIPA 313-5BF23 872,-

VIPA 313-6CF23

1.183,-

VIPA 314-6CG23 1.603,-

TIASTEP®7

TIASTEP®7

TIASTEP®7

TIASTEP®7

MEMORY CONFIGURATION CARD PRICE Order No.: Additional memory extension: in Euro

32kByte (16kByte program/16kByte data) 64kByte (32kByte program/32kByte data) 128kByte (64kByte program/64kByte data) 256kByte (128kByte program/128kByte data) 512kByte (256kByte program/256kByte data) 1MByte (512kByte programm/512kByte data) 2MByte (1MByte programm/1MByte data)4MByte (2MByte program/2MByte data) 8MByte (4MByte program/4MByte data)

All cards have a minimum capacity of 512MByte and can be used additional for programm backup.

PLC

VIPA CPUs and peripheral modules with the instruction set S7-300® by Siemens are more than 20 times faster than the similar S7-300® products. VIPA offers SPEED7, the technology of tomorrow, based on a million times proven STEP®7-programming platform. A flexible memory management covers all possible applications from 64kByte to 1MByte. Program and data are stored in one memory, no extra loading memory is necessary. A pluggable MMC/SD-Card-Card allows configuration as well as project and data saving in a FAT16 format compatible with PC.

Ethernet for PG communication, online maintenance and OP communication are always on Board (PtP). The well known serial system bus from the S7-300® series by SIEMENS is completely supported and allows the use of the S7-300® units of SIEMENS and VIPA. All important certifications exist. The complete STEP®7/S7-300® command set is available and was tested for full accuracy, examined from an independent Test institute in extensible test rows.

SPEED7-CPUs PRICE Order No.: Technical data in Euro

CPU 312SC-SPEED7 technology DC 24V, incl. 128kByte (up to 1MByte), MPI interface, SD slot, clock, 16DI, 16 of it for alarming, 8DO 24VDC/0,5A, 2x counter (10Khz) RS485 interface with library for ASCII, STX/ETX, 3964R, Modbus master protocols, Ethernet interface for PG/OP communication. HW identification: 6ES7312-5BE03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line CPU 313SC-SPEED7 technology DC 24V, incl. 256kByte (up to 1MByte), MPI interface, SD slot, clock, 24DI, 16 of it for alarming, 16DO 24VDC/0,5A, AI 4x12Bit(U/I), 1x12Bit(PT100), AO 2x12Bit(U/I), 3x counter (30Khz), RS485 interface with library for ASCII, STX/ETX, 3964R, Modbus master protocols, Ethernet interface for PG/OP communication. HW identification: 6ES7313-5BF03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line

CPU 313SC/DPM-SPEED7 technology DC 24V, incl. 256kByte (up to 1MByte), MPI interface, SD slot, clock, 16DI, 16 of it for alarming, 16DO 24VDC/0,5A, 3x counter (30Khz), PROFIBUS-DP master/slaves with 12Mbps and up to 125 slaves, alternative RS485 interface with library for ASCII, STX/ETX, 3964R, Modbus master protocols, Ethernet interface for PG/OP communication. HW identification: 6ES7313-6CF03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line

CPU 314SC/DPM-SPEED7 technology DC 24V, incl. 512kByte (up to 2MByte), MPI interface, SD slot, clock, 24DI, 16 of it for alarming, 16DO 24VDC/0,5A +8 DI/O in adition, AI 4x12Bit(U/I), 1x12Bit(PT100), AA 2x12Bit(U/I), 4x counter (60Khz), PROFIBUS-DP master/slave with 12Mbps and up to 125 slaves, alternative RS485 interface with library for ASCII, STX/ETX, 3964R, Modbus master protocols, Ethernet interface for PG/OP communication. HW identification: 6ES7314-6CG03-0AB0 + 6GK343-1EX11-0XE00, 8 I/O-units per line

MCC-MEMORY CONFIGURATION CARD VIPA MCC offers the possibility to extend the RAM of SPEED7 CPUs. The MCC is a specifically prepared MMC (multimedia Card). Plug the MMC into the card slot and execute an overall reset and the extension becomes available. The MCC must remain plugged in, otherwise the CPU switches to STOP after 48 hrs.

The MCC can’t be exchanged to a MCC with the same memory configuration, but it can be used for the project backup (Copy RAM > ROM). The shown MCC memory value increases the already available basic memory of the CPU by the value of the card. However, the maximum memory shown of the CPU can’t be overridden, even if a bigger memory extension is plugged in.




MMC flashcard, 512MByte, only for program back up, recommended if no MCC-Card is used.


19

VIPA

315

SNVI

PA 3

15SB

VIPA 314-2BG23 601,-

VIPA 314-2AG23 1.080,-

VIPA 315-2AG23 1.496,-

VIPA 315-4NE23 2.147,-

VIPA 315-4PN23 2.147,-

VIPA 315-4PN43 1.168,-

80mm

125mm

120mm

40mm

125mm

120mm

TIASTEP®7

TIASTEP®7

TIASTEP®7

TIASTEP®7

TIASTEP®7

TIASTEP®7


VIPA CPUs and peripheral modules with instruction set S7-300®/S7-400® by Siemens are faster than the currently strongest S7-300®, S7-400® systems. VIPA offers SPEED7, the technology of tomorrow, based on a million times proven STEP®7-programming platform. A flexible memory management covers all possible appli-cations from 64kByte to 8MByte. Program and data are stored in one memory, so no extra loading me mory is necessary. A pluggable MMC/SD-Card allows configu-ration as well as project and data secu rity in a FAT16 format compatible with PC. PROFIBUS-DP master or optional master CANopen and Ethernet for PG communi-cation, on-line maintenance and OP communication are al ways on Board (PtP).

In addition, an EthernetCP is able to become in tegrated directly into the CPU cabinet, compatible with CP343, 10/100Mbps. The well known serial system bus from the S7-300® series by Siemens is completely supported and allows the use of the S300® units of SIEMENS and VIPA. Not only are 8 modules able to be switched on, but also the CPUs support to drive up to 32 modules in a line. All relevant certifications exist. The complete STEP®7/S7-300®/400®er command set is available and has been examined by an independent test institute in extensible test rows to ensure complete accuracy.

SPEED7-CPUs PRICE Order No.: Technical data in Euro

CPU 314SE/DPS-SPEED7 technology, DC 24V, incl. 256kByte (up to 1MByte), MPI-interface, SD-slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP-Slave or RS485, PtP-Communication for ASCII-, STX/ETX-, 3964R-, ModbusRTU master protocol with library. 32 I/O-units per line HW identification: 6ES7315-2AG10-0AB0/V2.6 + 6GK343-1EX11-0XE00

CPU 314SB/DPM-SPEED7 technology, DC 24V, incl. 512kByte (up to 1MByte), MPI interface, SD slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP master / Slave, 12MBd, up to 125 Slaves. 32 I/O-units per line HW identification: 6ES7317-2AK14-0AB0 / V3.3 + 6GK343-1EX11-0XE00 On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

CPU 315SB/DPM-SPEED7 technology, DC 24V, incl. 1MByte (up to 4 MByte), MPI interface, SD slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP master / Slave, 12MBd, up to 125 Slaves. 32 I/O-units per line HW identification: 6ES7317-2AK14-0AB0 / V3.3 + 6GK343-1EX11-0XE00 On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

CPU 315SN/NET-SPEED technology, DC 24V, 1MByte (up to 4MByte)), MPI interface, SD slot, clock, Ethernet interface for PG/OP-Communication, PROFIBUS-DP master, 12MBd, up to 125 Slaves, add. integrated Ethernet-CP 343 with RFC1006, TCP/IP and S7 communication for 8 connections. 32 I/O-units per line HW identification: 6ES7317-2AK14-0AB0/V3.3 + 6GK343-1EX11-0XE00 + 6GK343-1EX21-0XE00 On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0 315SN/NET-SPEED7 technology, DC 24V, incl. 1MByte (up to 2 MByte), MPI interface, SD slot, clock, Ethernet interface for PG/OP-Communication, PROFINET- & PROFIBUS-DP master, additional integrated Ethernet-CP 343 with RFC1006, TCP/IP and S7 communication for 8 connections. 32 I/O-units per line HW identification: 6ES7315-2EH14-0AB0 / V3.2 + 6GK343-1EX11-0XE00 315SN/NET-SPEED7 technology, DC 24V, incl. 512kByte, MPI interface, SD slot, clock, Ethernet interface for PG/OP-Communication, PROFINET-master, additional integrated Ethernet-CP 343 with RFC1006, TCP/IP and S7 communication for 8 connections. RS485 interface with library for ASCII, STX/ETX, 3964R, Modbus master protocols. 32 I/O-units per line HW identification: 6ES7315-2EH14-0AB0 / V3.2 + 6GK343-1EX11-0XE00



PLC


20

VIPA 314-6CF23 1.557,-

VIPA 317-2AJ23 2.327,-

VIPA 317-4NE23 3.581,-

VIPA 317-4PN23 3.581,-

VIPA 342-1CA70 937,-

VIPA 342-1DA70 1.002,-

VIPA 342-2IA71 1.760,-

VIPA 343-1EX71 1.355,-

VIPA 321-1BH70 227,-

VIPA 322-1BH70 252,-

VIPA 323-1BH70 278,-

VIPA 331-7AF70 811,-

VIPA 331-7BF70 811,-

VIPA 307-1FB70 189,-

VIPA 391-1AF10 175,-

VIPA 391-1AF30 210,-

VIPA 391-1AF50 238,-

VIPA 391-1AJ10 175,-

VIPA 391-1AJ30 210,-

VIPA 391-1AJ50 238,-

VIPA

317

SN

VIPA

314

STVI

PA 3

22-1

BH70

VIPA

342

-1CA

70

VIPA

343

-1EX

71

TIASTEP®7

TIASTEP®7

TIASTEP®7

TIASTEP®7

SPEED BUS PERIPHERAL MODULES PRICE Order No.: Technical data in Euro

Speed bus, CANopen master RS485, 320 Bytes, up to 127 CAN knots. Speed bus, PROFIBUS-DP master RS485, 12 MBaud, up to 125 Slaves.

Speed bus, 2x interbus master, 2x RS422, Dual port master, up to 512 subscribers, number of the process data: In 1920 binary I/Os.

SPEED-Bus, CP343S TCP/IP-Ethernet CP, S7 communication, RFC1006, H1, TCP/IP, UDP, up to 16 connections.

SM 321S-FAST SPEED-Bus, digital input DI 16xDC 24V, 2,56μs to 40ms adjustable.

SM321S-FAST SPEED-Bus, digital output TH 16x DC 24 V, 0.5A, 100kHz

N.M. 321S-FAST speed bus, digital input DI/O 16x DC24V, digital output DO 0,5A, 100 kHz, 2.56 μs to 40ms adjustable. SM 331S-FAST SPEED-Bus, analog supported input AI 4x 16Bit, 100μsec per channel, +/- 20mA, adjustable 32 kByte cache memories per channel after trigger.

N.M. 331S-FAST speed bus, analog input AI 8x 16Bit, 100 μs per channel, +/-10 V, adjustable 32 kByte cache memory per channel after trigger.

Order No.: SPEED BUS POWER SUPPLY PRICE in Euro

PS307 power supply unit, only for SPEED-BUS units, Input:110...240VAC, Output: 24VDC, 6...12A

Order No.: SPEED BUS PROFILE RAILSPRICE in Euro

530 mm for 2 high-speed extension slots






SYSTEM COMPONENTS FOR SPEED BUS To be able to use the high-speed system performance fully, up to 10 VIPA modules with the new VIPA 32bit highspeed-bus (40 MByte/s) can be connected to the left side of the CPU. Very fast E/A units and counters as well as PROFIBUS-DP master and

Interbus master units are available. Any of the VIPA High-Speed CPUs will be connected to the SPEED Bus rail. With the Standard-Bus, any VIPA or Siemens modules can quickly and easily be placed to the right.

SPEED7-CPUs FOR SPEED-BUS PRICE Order No.: Technical data in Euro

CPU 314ST/DPM-SPEED7 technology DC 24V, incl. 512kByte (up to 2 MByte), MPI interface, SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication, DI 8-16 / DO 8-0, AI 4, AO 2, 1 PT100, 4 counters (100 kHz), PROFIBUS-DP master/slave, 12MBd, up to 125 Slaves. 32 I/O-units per line HW identification: 6ES7317-2AK14-0AB0 / V3.3 + 6GK343-1EX11-0XE00 On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

CPU 317SE/DPM-SPEED7 technology, DC 24 V, incl. 4MByte (up to 8 MByte), MPI interface, SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication,PROFIBUS-DP master/slave, 12MBd, up to 125 Slaves. 32 I/O-units per line HW identification: 6ES7317-2AK14-0AB0 / V3.3 + 6GK343-1EX11-0XE00 On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

CPU 317SN/NET-SPEED7 technology, DC 24 V, incl. 4MByte (up to 8 MByte),

MPI interface, SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication, PROFIBUS-DP master, 12MBd, up to 125 Slaves, additional integrated Ethernet-CP 343 with RFC1006, TCP/IP, S7 communication for max. 64 connections. 32 I/O-units per line HW identification: 6ES7317-2AK14-0AB0 / V3.3 + 6GK343-1EX11-0XE00 On request HW identification: 6ES7318-2AJ00 -0AB0/V3.0

CPU 317SN/NET-SPEED7 technology, DC 24 V, incl. 4MByte (up to 8 MByte), MPI interface, SPEED-Bus, SD slot, clock, Ethernet interface for PG/OP communication, PROFINET & PROFIBUS-DP-Master, additional integrated Ethernet-CP 343 with RFC1006, TCP/IP, S7 communication for max. 16 connections. 32 I/O-units per line HW identification: 6ES7317-2EK14-0AB0 / V3.2 + 6Gk343-1EX11-0XE00



PLC


21

6ES7321-1BH01-0AA0 VIPA 321-1BH01 141,-

6ES7321-1BL00-0AA0 VIPA 321-1BL00 280,-

6ES7321-1FH00-0AA0 VIPA 321-1FH00 189,-

6ES7322-1BF01-0AA0 VIPA 322-1BF01 164,-

6ES7322-1BH01-0AA0 VIPA 322-1BH01 194,-

6ES7322-1BH01-0AA0 VIPA 322-1BH41 246,-

6ES7322-1BL00-0AA0 VIPA 322-1BL00 387,-

6ES7322-1HH01-0AA0 VIPA 322-1HH00 288,-

6ES7322-5FF00-0AB0 VIPA 322-5FF00 267,-

6ES7323-1BL00-0AA0 VIPA 322-1BH60 1.000,-6ES7323-1BH01-0AA0 VIPA 323-1BH01 213,-

6ES7323-1BL00-0AA0 VIPA 323-1BL00 362,-

6ES7 331-1KF01-0AB0 VIPA 331-1KF01 385,-

6ES7331-7KB01-0AB0 VIPA 331-7KB01 215,-

6ES7331-7KF01-0AB0 VIPA 331-7KF01 546,-

6ES7332-5HB01-0AB0 VIPA 332-5HB01 357,-

6ES7332-5HD01-0AB0 VIPA 332-5HD01 456,-

6ES7334-0KE00-0AB0 VIPA 334-0KE00 339,-

VIPA 353-1DP01 240,-

VIPA 341-1AH01 885,-

VIPA 341-1CH01 952,-

VIPA 343-2AH10 595,-

VIPA 343-2AH10

VIPA 353-1DP01

VIPA 332-5HD01

VIPA 321-1BH01VIPA 322-1BL00

VIPA 341-1CH01

PLC



SYSTEM 300V – compatible SIEMENS S7-300® Modules – I/O-Modules, CPs & Fieldbus-Units

22

DIGITAL INPUT Identification Order No.: In- PRICE SIEMENS VIPA puts in Euro

16

24VDC 32

24VDC 16

120/230VAC

DIGITAL OUTPUT Identification Order No.: Out- PRICE SIEMENS VIPA puts in Euro

8 Trans. outputs 24VDC/2A




16 Rel. outputs 24VDC/230V/5A

8 Triac. outputs 120/230VAC/2A

16 Trans. outputs 1 input manual

16 switsches A/H

DIGITAL INPUT AND OUTPUT Identification Order No.: Inputs & PRICE SIEMENS VIPA Outputs in Euro

8/8

16/16

Identification Order No.: ANALOG INPUT/OUTPUT PRICE SIEMENS VIPA Technical data in Euro

Analog input, 8x13Bit, 4 conductors, ±50, ±500mV, ±1, ±5, ±10V, 1...5V, 0...10V, ±20mA, 0...20mA, 4...20mA, 0...600/6000Ohm, PT100, Ni100/1000

Analog input, 2x14Bit ±80, ±250, ±500mV, ±1V, ±2,5V, ±5V, ±10V, 1...5V, 10MOhm, ±10mA, ±20mA, ±3,2mA, 0...20mA, 4...20mA,150/300/600 Ohm, Pt100, Ni100, thermocouples J,R,K,N,L,E,T,S,B,C

Analog input, 8x14Bit ±80, ±250, ±500mV, ±1V, ±2,5V, ±5V, ±10V, 1...5V, 10MOhm, ±10mA, ±20mA, ±3,2mA, 0...20mA, 4...20mA,150/300/600 Ohm, Pt100, Ni100, thermocouples J,R,K,N,L,E,T,S,B,C

Analog output, 2x 13Bit, 0...10V, ±10V, 1...5V, 4...20mA, ±20mA, 0...20mA. Default value can be activated at PLC stop

Analog output, 4x 13Bit, 0...10V, ±10V, 1...5V, 4...20mA, ±20mA, 0...20mA. Default value can be activated at PLC stop

Analog input/output, 4 input/12Bit, 0...10V, Pt100 (RTD-4L), 0...10kOhm, 2 output/12Bit, 0...10V

PROFIBUS SLAVE ADAPTOR PRICE Order No.: Technical Data in Euro

DP-Slave, 1 DP-connection, DP-V0, V1, max. 32 units / lines

COMMUNICATION PROCESSORS PRICE Order. No.: Technical Data in Euro

RS232, SubD 9 pol., potential decoupled, ASCII, 3964R

RS422/485, SubD 9 pol., potential decoupled, ASCII, 3964R

AS-i-Master, Profil M3, max. 62 Slaves

VIPA 390-1AB60 21,- VIPA 390-1AE80 32,- VIPA 390-1AF30 38,- VIPA 390-1AJ30 51,-

VIPA 392-1AJ00 28,- VIPA 392-1AM00 42,- VIPA 922-3BC50 55,- VIPA 922-3BD20 57,- VIPA 922-3BF00 66,- VIPA 922-6BC50 87,- VIPA 922-6BD20 89,- VIPA 922-6BF00 95,-

VIPA 307-1BA00 122,-

VIPA 307-1EA00 152,-

VIPA 307-1KA00 202,-

VIPA 953-1LE00 110,- VIPA 953-1LF00 164,- VIPA 953-1LG00 242,- VIPA 953-1LH00 345,- VIPA 953-1LJ00 544,- VIPA 953-1LK00 626,- VIPA 953-1LL00 1.141,- VIPA 953-1LM00 1.683,- VIPA 953-1LP00 2.497,-

VIPA 953-0KX10 131,-

VIPA

307

-1BA

00

VIPA

307

-1EA

00

PROFILE RAILS PRICE Order No.: Length max. mounting in Euro

160mm 1 CPU / 1 Unit

482mm 1 CPU / 8 Unit 530mm 1 CPU / 10 Unit

830mm 1 CPU / 16 Unit

FRONT CONNECTOR PRICE Order No.: Technical data in Euro

20-pole with screw contact 40-pole with screw contact 20-pole with 2,5m cable 20-pole with 3,2m cable 20-pole with 5,0m cable 40-pole with 2,5m cable 40-pole with 3,2m cable 40-pole with 5,0m cable

POWER SUPPLIES PRICE Order No.: Technical data in Euro

Primary: 100-230VAC, Secondary: DC 24V, 2,5A

Primary: 100-230VAC, Secondary: DC 24V, 5A

Primary: 110...240VAC, Secondary: DC 24V, 10A

MMC-FLASHCARDPRICE

Best. Nr.: in Euro

512MByte flashcard, only for program back-up, recommended if no MCC-Card is used.

SYSTEM 300V – compatible SIEMENS S7-300®

Accessories – memory cards, profile rails, connectors, power supplies

MEMORY CONFIGURATION CARDS PRICE Order No.: Additional memory extension: in Euro

32kByte (16kByte program/16kByte data) 64kByte (32kByte program/32kByte data) 128kByte (64kByte program/64kByte data) 256kByte (128kByte program/128kByte data) 512kByte (256kByte program/256kByte data)

1MByte (512kByte programm/512kByte data)

2MByte (1MByte programm/1MByte data)

4MByte (2MByte program/2MByte data)

8MByte (4MByte program/4MByte data) All cards have a minimum capacity of 512MByte and can be used

additionally for program back-up.


PLC


23

VIPA 214-1BC03 423,- VIPA 214-1BA03 479,- VIPA 214-2BE03 525,- VIPA 214-2BP03 540,- VIPA 214-2BS13 536,- VIPA 214-2BS33 540,- VIPA 214-2BT13 1.036,- VIPA 215-1BA03 849,- VIPA 215-2BE03 882,- VIPA 215-2BP03 908,- VIPA 215-2BM03 1.206,- VIPA 215-2CM03 1.206,- VIPA 215-2BS03 1.206,- VIPA 215-2BS33 908,- VIPA 215-2BT13 1.206,- VIPA 953-0KX10 131,-

VIPA 214-1BC06 423,- VIPA 214-1BA06 479,- VIPA 214-2BM06 849,- VIPA 215-1BA06 849,- VIPA 215-2BE06 882,- VIPA 215-2BT16 1.206,-

VIPA 253-1DP01 187,- VIPA 253-1CA01 187,- VIPA 253-1NE00 288,-

TIASTEP®7

STEP®7

VIPA 253-1DP31 160,-


PLC


24

CPU CPU HW identification uniformly: 6ES7315-2AF03-0AB0/V1.2

CPU 21x Memory/ Inter- PRICE Order No.: Load memory faces in Euro

48/80kByte MPI 96/144kByte MPI 96/144kByte MPI/LAN (PG/OP) 96/144kByte MPI / DP-Slave 96/144kByte MPI / 1x RS232 96/144kByte MPI / 1x RS485 96/144kByte MPI / LAN (CP343)

128/192kByte MPI 128/192kByte MPI/LAN (PG/OP) 128/192kByte MPI/DP-Slave 128/192kByte MPI/DP-Master 128/192kByte MPI/CANopen-Master 128/192kByte MPI / 2x RS232 128/192kByte MPI / 1x RS485 128/192kByte MPI / LAN (CP343)

512MByte MMC flash card

CPU CPU HW identification uniformly: 6ES7315-2AG10-0AB0/V2.6

CPU 21x Memory/ Inter- PRICE Order No.: Load memory faces in Euro

48/80kByte MPI 96/144kByte MPI 96/144kByte MPI/DP-Master

128/192kByte MPI 128/192kByte MPI / LAN (PG/OP) 128/192kByte MPI / LAN (CP343)

FIELDBUS-SLAVE INTERFACES PRICE Order No.: Technical data in Euro

PROFIBUS-DP, address 1-99 CANopen, address 1-99 Ethernet, ModbusTCP

The CPUs of the system 200V need only 30% of the space required of the S7-300® CPUs, but nevertheless operate with the full STEP®7 instruction set S7-315® by SIEMENS. Through the standard MPI interface via PG programming unit, PC adaptor and operator panels from SIEMENS, ESA, ADVANTECH, VIPA a.s.o. can be connected. To save the project, a custom MMC card can be used.

The RAM and Flash memory necessary for the operation are included in the CPU. Additionally PROFIBUS-DP master, DP-Slave, RS232 interface or TCP/IP CP-unit can be combined in different CPU variations. High memory sizes up to 128kByte program memory and 192kByte load memory with short cycle times offer a big area of application. A CPU can supply up to 32 units.

SYSTEM 200V – STEP®7 programmable

Modular PLC-System – CPU-, Fieldbus-Interfaces

FIELDBUS-SLAVE ECO INTERFACES PRICE Order No.: Technical data in Euro

PROFIBUS DP-Slave, address 1-125, up to 8 units, DC 24 V, 12MBaud, DP-V0, DP-V1

Dimensions 1 slot (H x W x D): 76 x 25,4 x 74mm Dimensions 2 slots (H x W x D): 76 x 50,8 x 74mm

VIPA 238-2BC00 364,-

VIPA 250-1BA00 288,-

VIPA 250-1BS00 309,-

VIPA 253-1BA00 509,-

VIPA 207-1BA00 118,-

VIPA 207-2BA20 145,-

VIPA 201-1AA00 28,-

VIPA 201-1AA10 34,-

VIPA 201-1AA20 34,-

VIPA 201-1AA40 35,-

VIPA 290-1AF30 21,-

VIPA 208-1DP01 572,- VIPA 240-1BA20 315,-

VIPA 240-1CA20 315,-

VIPA 240-1CA21 315,-

VIPA 240-1FA20 315,-

VIPA 290-0AA10 5,-VIPA 290-0AA20 7,- VIPA 290-0AA40 13,- VIPA 290-0AA80 26,-

PLC



25

FUNCTION MODULES PRICE Order No.: Technical data in Euro

SM 238C system expansion, 12 DI, 4 DI/A 24VDC 1A, 6 (16bits)/3 (32bits) of counter 30kHz, 3x AI 12 bits: ±10V/4 V/400mV/20 mA and 4-20mA 1x AI 12 bits: Pt100 / 1000, Ni100/1000, 600/3000 ohm, 2xAA 12bits: ±10V/20 mA, 1-5V, 0-10V, 0-20mA, 4-20mA

2x32Bit / 4x16Bit incremental counter inputs 24VDC, max. 1Mhz, 2xDA 24VDC/1A

1x12/24 bits of counter input SSI, RS422, 600kBd, 2xDA 24VDC /1A

Positioning-module for stepping motor 1 axis, RS422, potential decoupled

POWER PACKS & PASSIV TERMINALS MODULES PRICE Order No.: Technical data in Euro

prim. AC 100-240VAC/sec. 24VDC, 2A

prim. AC 100-230VAC/sec. 24VDC, 2A ± on 2x11 terminals red/blue

2x11 terminals, in each case for the potential distribution, grey-grey 2x11 terminals, in each case for the potential distribution, green/yellow-grey

2x11 terminals, in each case for the potential distribution, red/blue

2x5 terminals, gray-gray 2x6 terminals, red/blue

35 mm Alu DIN-Rail, Length: 530mm

CP- MODULES PRICE Order No.: Technical data in Euro

PROFIBUS-DP master, up to 12Mbps, 100/200V

RS232, DB9, ASCII, 3964R, MODBUS RTU/ASCII

RS485, DB9, ASCII, 3964R, MODBUS RTU/ASCII

RS422/RS485, DB9, ASCII, 3964R, MODBUS RTU/ASCII

M-BUS PRICE Order No.: Technical data in Euro

Communication processor for M-Bus-system (Metering-Bus), 2-wire fieldbus for data acquisition of consumption, electrical isolated, up to 6 slaves possible.


SYSTEM 200V – STEP®7 programmable Modular PLC-System – I/O-Units, Accessories

BACK WALL BUS PRICE Order No.: Modules in Euro 1

2 4

8 Arbitrarily addable to max. 32 units.

VIPA 231-1BD53 267,- VIPA 231-1BD60 397,-

VIPA 231-1BD70 397,-

VIPA 231-1BF00 442,- VIPA 231-1FD00 452,-

VIPA 232-1BD51 267,-

VIPA 234-1BD50 341,-

VIPA 234-1BD60 345,-

VIPA 231-1BD30 160,-

VIPA 231-1BD40 160,-

VIPA 232-1BD30 171,-

VIPA 232-1BD40 171,-

VIPA 221-1BF00 76,- VIPA 221-1BF50 82,- VIPA 221-1BF10 76,- VIPA 221-1BF21 126,- VIPA 221-1BH10 152,- VIPA 221-2BL10 286,- VIPA 221-1FF50 135,- VIPA 221-1BH20 206,- VIPA 221-1BF30 70,- VIPA 221-1BH30 126,-

VIPA 223-1BF00 108,- VIPA 223-2BL10 326,-

VIPA 222-1BF00 89,- VIPA 222-1BF10 101,- VIPA 222-1BH10 177,- VIPA 222-1BH20 221,- VIPA 222-1BH50 143,- VIPA 222-2BL10 334,- VIPA 222-1HF00 120,- VIPA 222-1HD10 82,- VIPA 222-1FF00 179,- VIPA 222-1BF30 82,- VIPA 222-1BH30 145,-

ANALOG INPUT AND OUTPUT PRICE Order No.: Technical data in Euro

Analog input, 2 conductors/4x16Bit, 4 conductors/2x16 bits PT100, PT/Ni1000, NiCrNi, thermocouple, J, K, N, R, S, T ±10V, ±400mV, ±20mA, 4-20mA Analog input, 4x12Bit, 0/4-20mA, potential decoupled channel

Analog input, 4x12Bit, ±10V, potential decoupled channel

Analog input 2conductor/8x16bits, 4conductor/4x16bits PT100, thermocouple J, K, T, 0-60mV

Analog input FAST, 4x16Bit, ±400mV, ±4V, ±10V, ±20mA, 4-20mA, process and diagnosis alarm, average value generation more than the last 2.4, 8 or 16 values Cycle time 1ms for 4 channels

Analog source module, 4 outputs 0-10V, ±10V, 0-20mA, 12bits

Analog input and output 2x12 bits of input, 2x12bits of output, ±10V, 0-10V, 1-5V, ±20mA, 0-20mA, 4-20mA

3x AI 12bits: ±10V/4 V/400mV/20 mA and 4-20mA, 1x AI 12bits: Pt100/1000, Ni100/1000, 600/3000 ohm, 2xAA 12bits: ±10V/20 mA, 1-5V, 0-10V, 0-20mA, 4-20mA, Default value can be activated at PLC stop.

AI 4x12Bit, ±10V, ECO

AI 4x12Bit, 4..20mA, ±20mA, ECO

AO 4x12Bit, 0..10V, ±10V, ECO

AO 4x12Bit, 0/4..20mA, ECO

DIGITAL INPUT PRICE Order No.: Technical data in Euro

DI 8x DC 24V DI 8x DC 24V, NPN DI 8x DC 24V, 0,2ms DI 8x, alarm DC 24V, 0,2ms DI 16x DC 24V DI 32x DC 24V

DI 8x AC 180...265V DI 16x DC 24V, (2x counter) DI 8x DC 24V, ECO DI 16x DC 24V, ECO

DIGITAL INPUT AND OUTPUT PRICE Order No.: Technical data in Euro

DI/O 8x DC 24V, 1A, soft-configurable DI/O 16x DC 24V and DO 16x DC 24V, 1A

DIGITAL OUTPUT PRICE Order No.: Technical data in Euro

DO 8x DC 24V, 1A DO 8x DC 24V, 2A DO 16x DC 24V, 1A DO 16x DC 24V, 2A DO 16x DC 24V, 0.5A, NPN DO 32x DC 24V, 1A DO 8x relay, 230VAC / 24VDC, 5A DO 4x relay, galvanic decoupled, 230VAC/30VDC, 5A DO 2x, solid-state, 230VAC/400VDC, 0.5A DO 8x DC 24V, 0.5A, ECO DO 16x DC 24V, 0.5A, ECO


PLC


26


SYSTEM 200V – STEP®7 programmable Modular PLC-System – I/O-Units, Accessories

SP-COP1-A /R119011100 710,-

SP-COP1-C /R119011200 740,-

SP-COP2-EN-A /119012100 786,-

SP-COP2-EN-C/R119012200 813,-

SP-COP2-ENI-A/R119013100 966,-

SP-COP2-ENI-C/R119013200 994,-

SP-SDIO84-P1-K-A / R119000300 309,-

SP-SDIO84-P1-K-C / R119000400 309,-

SP-SDI8-P1-K-A / R119000500 250,-

SP-SDI8-P1-K-C / R119000600 250,-

SNE 4024K-A / R118839300 240,-

SNE 4024K-C / R118839400 255,-

SP-CANopen / R119002100 441,-

SP-PROFIBUS-DP / R119001900 441,-

SP-CABLE1 / R119000900 32,-

SP-CONVERTER / R119002500 57,-

SP-FILTER1 / R119002600 9,-

SP-FILTER2 / R119002700 9,-

SP-COP-CARD / R119010000 53,-


PLC


27

SAFETY COMPACT MODULES PRICE Name / Order No.: Description in Euro

samosPRO compact module, 20 safe DI, 4 safe DO, USB interface, screw clamp terminal pluggable

samosPRO compact module, 20 safe DI, 4 safe DO, USB interface, spring clamp terminal pluggable

samosPRO compact module, 16 safe DI, 4 safe DO, 4 configurable safe I/Os, USB + Ethernet interface, screw clamp terminal pluggable

samosPRO compact module, 16 safe DI, 4 safe DO, 4 configurable safe I/Os, USB + Ethernet interface, spring clamp terminal pluggable

samosPRO compact module, 16 safe DI, 4 safe DO, 4 configurable safe I/Os, USB interface, Industrial Ethernet (PROFINET I/O, ETHERCAT, ETHERNET IP), screw clamp terminal pluggable

samosPRO compact module, 16 safe DI, 4 safe DO, 4 configurable safe I/Os, USB interface, Industrial Ethernet (PROFINET I/O, ETHERCAT, ETHERNET IP), spring clamp terminal pluggable

SAFETY ELECTRONIC MODULES

samosPRO, IO-module with 8 input/4 solid state output, screw clamp terminal pluggable

samosPRO, IO-module with 8 input/4 solid state output, spring clamp terminal pluggable

samosPRO, IN-module (8 DI), screw clamp terminal pluggable

samosPRO, IN-module (8 DI), spring clamp terminal pluggable

SAFETY RELAYS Output expansion unit, 2x2 enabling current paths,

2x1 signaling outputs, DC 24 V, screw-terminals pluggable Output expansion unit, 2x2 enabling current paths,

2x1 signaling outputs, DC 24 V, spring clamp terminal pluggable

SAFETY ELECTRONIC MODULES samosPRO Gateway for CANopen

samosPRO Gateway for PROFIBUS DP

SAFETY ACCESSORIES

samosPRO, cable, 2m, M8-DSUB

USB-RS232-Adapter

samosPRO-Output-Filter, 680nF

samosPRO-Output-Filter, 2,2uF

samosPRO-Memory card for SP-COP

HIGHLIGHTS: • samos PRO COMPACT – the safety control of the next generation – is a compact and fast

modular safety miro-controller for the monitoring and controlling of mechanical and system engineering applications

• Integrated „know-how protection“ • Programmable with the NEW modern programming tool samosPLAN5+ incl. process

simulation and logic analyzer • The system enables the implementation of complete and economic safety solutions which

are more flexible than conventional relay technology • Easy to use with graphical device configuration and a functional diagram editor with

extensive certified function block library • Very convenient (diagnosis, simulation, start up mode) • High safety combined with convincing cost efficiency • The modular design also enables expansion at a later stage and therefore flexible planning

with a reduced variety of module versions. Easier handling and logistics.

TECHNICAL-FEATURES:: • Certified in accordance with PLe/Kat.4 (ISO 13849-1) and SIL3 (IEC 62061) • 16 safety inputs, 4 safety outputs and 4 switchable safety in-/outputs

on a mounting width of 45mm, expandable up to 116 safety inputs and up to 56 safety outputs

• Compact safety solutions from a mounting width of 45 mm • Minimum reaction time of 12ms • Connection to a standard VIPA controller via fieldbus gateways (PROFIBUS,

PROFINET and CANopen, MODBUS/TCP and ETHERNET/IP) • The use of Ethernet gateways allows online access including programming

and remote main tenance • 4A wear and tear-free on each single output of the system • 512MB changable and easily usable program memory SP-COP-CARD

in SD card format • Environmental temperature range of -25 °C up to +65 °C

SAFETY WITH SAMOS PRO Modular and powerful safety solutionsSTRUCTURE AND CONCEPT samosPRO is a fast, compact, modular safety controller for monitoring and controlling mechanical and system engineering applications. The system enables complete and economic safety solutions that are more flexible than conventional relay technology. The graphic device configuration and a function chart editor with extensive certified function block library ensure convenient and clear programming. The modular design also allows expansion at a later stage and therefore flexible planning with fewer module variations. Up to 12 input and output expansion modules each with a width of 22.5mm can be connected to a controller module. In this way 8 to 96 safe inputs and 4 to 48 safe outputs can be implemented. The safety control system samosPRO is certified in accordance with EN 61508 to SIL 3, EN 62061 to SIL CL 3 and in accordance with EN ISO 13849-1:2006 Configuration and Performance Level e/category 4. This covers the requirements of mechanical and system engineering applications. It is mounted on a 35mm profile rail.

VIPA 972-0DP01 40,-

VIPA 972-ODP10 51,-

VIPA 972-ODP20 51,-

VIPA 972-ODP30 51,-

VIPA 972-9DP01

VIPA 972-9DP10

VIPA 972-9DP20

VIPA 972-9DP30

VIPA 972-0PN00 24,-

VIPA 972-8PN00 187,-

VIPA 830-0LC00 156,-

VIPA 830-0LD00 311,-

VIPA 830-0LE00 777,-

VIPA 830-0LF00 1.555,-

905-6AA00 200,-

VIPA 830-0PC00 255,-

VIPA 830-0PD00 507,-

VIPA 830-0PE00 1.267,-

VIPA 830-0PF00 2.449,-

VIPA 306-1LE00 1.267,-

VIPA 306-1UZ00 1.267,-

VIPA 306-1UE00 1.267,-


PLC


28

Features EasyConn and standard connector: • Visual connection check (cross wiring, position of shield and cable) • High sturgeon safety and robustness by solid zinc pressure casting

full metal casing • Cable splicing via comfortable cutting-clamp technology • Lostsafe one-screw-mounting system • Integrated terminating resistor • Integrated PG/diagnosis jack • 0°, 45°, 90° cable departure • Additional PG connection with 90° cable departure

Features diagnosis electronic with EasyConn: • Status display via integrated LEDs for bus-test functions

PWR-LED : (on) power supply 4...5,5V for device OK

TXD-LED : (blinks) device activity on bus

Term-LED : (off) terminating resistor deactivated (on) terminating resistor activated (blinks) terminating resistor defective

ERR-LED : (off) bus state OK (blinks) wrong signal level (on) no termination or open

PROFIBUS CONNECTORS PRICE Order No.: Technical data in Euro

Standard PROFIBUS connector, 90°, PG jack, cutting-clamp technology

EasyConn PROFIBUS connector, 90°, PG jack, diagnosis electronics, cutting-clamp technology

EasyConn PROFIBUS connector, 45°, PG jack, diagnosis electronics, cutting-clamp technology

EasyConn PROFIBUS connector, 0°, diagnosis electronics, cutting-clamp technology

Standard PROFIBUS connector, 90°, PG jack, cutting-clamp technology, 100 pieces

EasyConn PROFIBUS connector, 90°, PG jack, diagnosis electronics, cutting-clamp technology, 100 pieces

EasyConn PROFIBUS connector, 45°, PG jack, diagnosis electronics, cutting-clamp technology, 100 pieces

EasyConn PROFIBUS connector, 0°, diagnosis electronics, cutting-clamp technology, 100 pieces

PROFINET CONNECTORS PRICE Order No.: Technical data in Euro

PROFINET & EtherCAT plug, 180°, RJ45, 8 wire, insulation displacement connection, AWG24/1 - 22/1; AWG26/7 - 22/7, 1 piece

PROFINET & EtherCAT plug, 180°, RJ45, 8 wire, insulation displacement connection, AWG24/1 - 22/1; AWG26/7 - 22/7, 10 pieces

PROFIBUS CABLES PRICE Order No.: Length in Euro

100m

200m 500m 1.000m

PROFIBUS DISMANTLE TOOL

Dismantle Tool (Manufacturer: SIEMENS)

PROFINET CABLES PRICE Order No.: Length in Euro

100m

200m 500m 1.000m

GENERAL ACCESSORIES PROFIBUS / PROFINET Connectors & Cables, S5 Retrofit – PROFIBUS DP slave modules

on request

on request

on request

on request

S5®-PROFIBUS SLAVE ADAPTOR PRICE Order No.: Name in Euro

IM 306 DP-Slave - 115U ZG/EG IM*, power supply 24VDC inclusive

IM 306 DP-Slave - 135U/155U ZG CPU

IM 306 DP-Slave - 135U/155U ZG/EG IM, power supply 24VDC inclusive

* Adaptation capsules 6ES5 491-0LB11 for application in AG-115U racks necessary.

VIPA 920-1CB50 1.580,-

VIPA 920-1BB10 440,-

VIPA 910-1EN50 140,-

VIPA 910-1EN80 175,-

VIPA 911-2PN50 437,-

VIPA 911-2PN80 702,-


PLC


29

PROFIBUS REPEATER PRICE Order No.: Technical Data in Euro

ProfiHub B5, 5 galvanic isolated channels (repeater segments), 31 devices per channel, transparent for all PROFIBUS DP protocols (DP-V0, DP-V1, DP-V2, FDL, MPI, FMS, PROFI-safe, PROFIdrive a.s.o.), transmission speed 9.6kbps to 12Mbps (including 45.45kbps), PROFIBUS address not required, integrated termination facilities (switches), operating temperature -20 to +75°C, dimensions: 167 x 111 x 32mm, supply: 10-30 VDC, 130mA, isolation class IP 20

PROFIBUS Repeater B1, 1 repeater segment, 31 devices per channel, transparent for all PROFIBUS DP protocols (DP-V0, DP-V1, DP-V2, FDL, MPI, FMS, PROFIsafe, PROFIdrive a.s.o.), transmission speed 9.6kbps to 12Mbps (including 45.45kbps), PROFIBUS address not required, integrated termination facilities (switches), operating temperature -20 to +60°C, dimensions: 106 x 55 x 33mm, supply: 19-28 VDC, 65mA, isolation class IP 20

ETHERNET SWITCHES PRICE Order No.: Technical Data in Euro

Industrial-Switch EN5-R, 5x RJ45 10/100BaseTX full / half Duplex, supports IEEE 802.3 and IEEE 802.3u/x and automatic MDI/MDI-X recognition, redundant power supply for 12-45 VDC, IP30 aluminium housing for DIN rail mounting

Industrial-Switch EN8-R, 8x RJ45 10/100BaseTX full / half Duplex, supports IEEE 802.3 and IEEE 802.3u/x and automatic MDI/MDI-X recognition, redundant power supply for 12-45 VDC, IP30 aluminium housing for DIN rail mountin

PROFINET SWITCHES PRICE Order No.: Technical Data in Euro

Industrial-Switch PN5-RD, PROFINET v2 Conformance Class B, Profinet diagnosis via GSD integration, Management functions such as IGMP Snooping, IEEE 802.1Q VLAN, QoS, RMON, SNMP, Port mirroring, PROFINET I/O parameters, I/O cyclic data, DCP, DHCP, Turbo Ring and Turbo Chain (recovery time < 20 ms)

Industrial-Switch PN8-RD, PROFINET v2 Conformance Class B, Profinet diagnosis via GSD integration, Management functions such as IGMP Snooping, IEEE 802.1Q VLAN, QoS, RMON, SNMP, Port mirroring, PROFINET I/O parameters, I/O cyclic data, DCP, DHCP, Turbo Ring and Turbo Chain (recovery time < 20 ms)

UNMANAGED ETHERNET-SWITCHES

MANAGED ETHERNET-SWITCHES

The industrial switches EN5-R (5-Port) and EN8-R are entry-level models which support the IEE 802.3 or 802.3x/u with 10/100M full / half duplex and MDI/MDIX recognition. They are designed for operating temperature ranges of -10° up to 60°C and can also be deployed in rough industrial environments.

The Ethernet switches PN5-RD (5-Port) and PN8-RD (8-Port) are Managed Ethernet switches with integrated PROFINET functions. This makes it easier to integrate the PN switches into PROFINET oriented engineering systems and also support a variety of useful management functions such as IGMP Snooping, IEE802.1Q VLAN, Qos, Port mirroring, SNMP, bandwidth management and warning by e-mail or relay output.

The ProfiHub B5 PROFIBUS-DP repeater in a IP20 casing for industrial automation, to implement long multi-device spur lines and backbone structures with star/tree segments for PROFIBUS-DP. It has the functionality of 5 galvanic isolated transparent repeaters. This allows network structures with extended spur lines that can handle a maximum of 31 devices individually and a length equal to the main bus. The ProfiHub B5 refreshes a received message

on one channel and transfers it to all the other channels. The advanced 12Mbps core of the repeater B1 is identical to the ProfiHub. It can be cascaded unlimitedly and is equipped with an isolated RS485 interface. The data is constantly monitored for glitches which are digitally filtered out. Every channel has on-board switchable termination and can drive 31 devices.

PROFIBUS DP-REPEATER

GENERAL ACCESSORIES PROFIBUS Repeater, ETHERNET & PROFINET Switches

H41-71A41-0 420,-

H71-71A41-0 689,-

HA1-71A41-0 1.349,-

67K-RSL0-JX 2.096,-

67P-RSLO-JX 2.680,-

67S-RSLO-JX 3.264,-

62K-JJKO-EB 2.160,-

62M-JJKO-EB 2.395,-

574-2AH00 103,-

574-2AI00 120,-

953-1SI00 105,-

OPERATOR SYSTEMS Touch Panel Computer – Professional Panels, Smart-Panels and Multitouch Panel PC

MOVICON runtime on board

VISUALIZATION



30

SMART PANELS PRICE Order No.: Technical data in Euro

TP 304-SM, 4,3“ TFT color, 480 x 272 pixel, RS232/RS422/RS485, USB-A, Ethernet RJ45, robust plastic case, dimensions: 147 x 107 x 31 mm, integrated cut-out: 136 x 96 mm

TP 307-SM, 7“ TFT color, 800 x 480 pixel, RS232/RS422/RS485, USB-A, Ethernet RJ45, robust plastic case, dimensions: 187 x 1147 x 34 mm, integrated cut-out: 176 x 136 mm

TP 310-SM, 10“ TFT color, 1024 x 768 pixel, RS232/RS422/RS485, USB-A, Ethernet RJ45, robust plastic case, dimensions: 282 x 197 x 35 mm, integrated cut-out: 271 x 186 mm

PANEL PCS PRICE Order No.: Technical data in Euro

10,1“ TFT color, 1280 x 800 pix, housing: aluminium/steel Dimensions: 292 x 207 x 54,2mm, Cut-out: 297 x 212mm

15,6“ TFT color, 1366 x 768 pix, housing: aluminium/steel Dimensions: 417,8 x 312,8 x 63,8mm, Cut-out: 401 x 296mm

21,5“ TFT color, 1920 x 1080 pix, housing: aluminium/steel Dimensions: 562,4 x 382,4 x 60,9mm, Cut-out: 547 x 367mm

PROFESSIONAL PANELS PRICE Order No.: Technical data in Euro

10,4“ TFT color, 800 x 600 pix, housing: Die-cast aluminium Dimensions: 304 x 233 x 52,5mm, Cut-out: 287 x 217mm

12“ TFT color, 800 x 600 pix, housing: Die-cast aluminium Dimensions: 325 x 263 x 52,5mm, Cut-out: 311 x 249mm

OPTIONSPRICE

Order No.: in Euro

Compact Flash (CF-Card) 1 GB

Compact Flash (CF-Card) 2 GB

Secure Disc (SD-Card) 2 GB

COMMUNICATION


36

In the spirit of invention, Hans-Jürgen Hilscher, the founder of the company, has taken the privately owned business to a leading position worldwide. Our basic principle is still the same as it was in 1986: Together we can accomplish everything. Our employees are the basis of our success and growth. Employees grow with their tasks – Hilscher grows with its employees. At Hilscher, you meet dedicated people who take up new challenges every day. Continuous training programs contribute to the awareness that each and every employee contributes to the high quality level of our products and services. Technology is the primary focus at Hilscher. We provide you with a perfectly integrated product portfolio for industrial communication worldwide to meet highest expectations along the complete value chain – from proprietary ASICs via custom designed solutions to a wide range of standard products. In a challenging market, strategic vision and innovation are key to steady growth. We have been able to maintain continuous growth even through economically difficult times. For the future, our goal is to expand together with our customers. We are determined to continue this corporate strategy and philosophy. A goal gua-ranteed by our founder Hans-Jürgen Hilscher, and his son Sebastian Hilscher.

• An integrated technology platform based upon proprietary developments guarantees long-term availability

• Privately owned company • Production and development made in Germany • One partner – everything from one source

Learn more • Uniform standard interfaces across all systems • All Fieldbus and Real-Time Ethernet systems as master or slave • Open technology for custom applications • Hardware and software from one source • Availability for 10 years guaranteed

• PC cards in all form factors • Gateways for all industrial protocols • Communication modules in all varieties • Test and evaluation boards • Custom-designed modules

HILSCHER Hilscher – always the right solutions for your industrial communication needs

NHST-T100-EN/ECM netHOST EtherCAT Master 777,-

NHST-T100-DP/DPM netHOST PROFIBUS Master 777,-

NHST-T100-CO/COM netHOST CANopen Master 777,-

NHST-T100-DN/DNM netHOST DeviceNet Master 777,-

NHST-T100-EN/PNM netHOST PROFINET Master 777,-

COMMUNICATION


37

All prices in euro excluding VATAll prices in euro excluding VAT

FIELDBUS MASTER

netHOST FB - LAN controlled Fieldbus master for DIN rail

A netHOST FB is a full-featured and autonomously operating Fieldbus master allowing industrial PCs and other embedded systems the control of Fieldbus networks over an ordinary LAN connection. A simple TCP/IP based transport protocol transfers the services between the controlling unit and the device. For device integration a DLL for Windows and a ‚C‘ source code for embedded solutions is provided. In both cases the call interface (API) is identical to Hilschers PC cards. This makes a netHOST a „remotely controllable PC card for field installations“. 100 bytes process data inputs and outputs are exchangeable over the LAN network in about one millisecond. Acyclic services to the subordinate Fieldbus stations are supported as well. A bus confi guration software is included in the delivery. Two devices can be used in combination to realize redundant applications. Services are provided to execute a controlled switchover in the event one device fails or a line breaks. In case a device fails the memory card slot allows service personnel to perform a firmware and configuration recovery on a replacement device in less than a minute.

Fieldbus master for IT service & business networks

Highlights • Controlled via simple TCP/IP based access protocol • For PROFIBUS, CANopen and DeviceNet • Identical API as Fieldbus PC cards • With application example, TCP/IP

driver/coding and DLL as source code • In dual-mode applicable for redundancy operations

Technical Data

netHOST FB

Operating Temperature ±0 ... +60 °C Storage Temperature -40 °C ... +85 °C Operating Voltage +18 … +30 V / 130 mA @ +24 V Dimensions (L x W x H) 100 x 52 x 70 mm (without connector)

InterfacesUSB Mini-B, 2 x RJ45, D-Sub DE-9 connector, COMBICON-5-pin

Indicators SYS, APL, L/A, Rx/Tx, bus-specific Weight 150 g Certification UL 508, CE, RoHS, REACH EG Nr. 1907/2006 Emission CISPR 11 Classe A Noise Immunity | Vibration, Shock EN 61131-2:2003 Mounting DIN-Rail, EN-50022 35mm x 7,5mm Processor netX 100 Card slot MMC card, SD card

The following figure illustrates the data flow of „Ethernet Marshalling” with the netHOST:

Data flow of LAN controlled netHOST device

Technical Data

netHOST FB

LAN-Ethernet IEEE 802.3 10 / 100 Base-T Open TCP / IP transport protocol Port 50111 and 50112 128 Bytes E and A in 1,33 ms typical

Profibus-Master IEC 61158 DP, DPV1, Class 1 / Class 2 Master 125 Slaves / 5736 Bytes I and O data

CANopen-Master EN 50325-4 SDO, PDO, NMT, SYNC EMCY 126 Notes / 3854 Bytes I and O data 11 Bit, 29Bit Identifier CAN Layer 2

DeviceNet-Master IEC 62026-3 UCMM, Predefined Master / Slave Conn. COS, Poll, Cyclic I / O-Connection 64 Slaves / 3854 Bytes I and O datan Explicit Message Channel data access

FIELDBUS MASTER PRICE Article Description in Euro

COMMUNICATION


36

PC CARDS IN ALL FORMATS With the cifX communication interface, the user will have a unified standard for all Real-Time-Ethernet- and Fieldbus systems on different hardware platforms. The complete protocol stack will be exectued on the PC card and data exchange to the host will be done via Dual-Port-Memory or DMA. Hilscher offers the cifX

PC FIELDBUS CARDSPC communication cards with PCI or PCI Express, Mini PCI or Mini PCI Express, PCI-104, PC/104 or Compact PCI interface. With a rotary switch an easy and reliable slot assignemt can be done for the PCI types. A complete software package including a single FDT/DTM based configuration tool for all products and networks, documentation, loadable firmware and driver toolkit is always in the scope of delivery. Due to the own network controller netX a 10-years delivery is guaranteed.

• For all major network protocols • Available in all common PC card formats • Single hardware for all Real-Time-Ethernet protocols • Minimum logistic and administrative effort trough

least product variety • Comprehensive accessories (OPC server & driver for

different OS) • Same software host interface for all protocols • Quick & Easy change of protocol by loadable firmware

CIFX 50 RE 301,-

CIFX 50E-RE 362,-

CIFX 90-RE/F 339,-

CIFX 104-RE 387,-

CIFX 104C-RE 387,-

MASTERLIZENZ 167,-

MRPLizenz 167,-

CIFX 50-DP 362,-

CIFX 50-CO 362,-

CIFX 50-DN 362,-

CIFX 50-2ASM 712,-

CIFX 50E-DP 423,-

CIFX 50E-CO 423,-

CIFX 50E-DN 423,-

CIFX 50E-2ASM 774,-

CIFX 50-2DP 515,-

CIFX 90-DP/F 399,-

CIFX 104-DP 447,-

CIFX 104-CO 447,-

CIFX 104-DN 447,-

CIFX 104C-DP 447,-

CIFX 104C-CO 447,-

CIFX 104C-DN 447,-

MASTERLIZENZ 167,-

MRPLizenz 167,-

COMMUNICATION


37


FIELDBUS CARDS

PC Fieldbus Cards

Powerlink Controlled Node/Slave

Cyclic Data max. 2980 Bytes

Acyclic Data SDO Up-/Download

Functions SDO via ASND and UDP, Poll Request/Response Response Time 1μs, Version V2

CANopen Nodes Master Nodes max. 126 Cyclic Data max. 1024 Bytes 7168 Bytes SDO Up- a. Download max. 200Bytes/Request

Emergency Producer Consumer/Producer

Functions Node-/Life Guard., Heartbeat, PDO Mapping, NMT Magagement, SYNC, Emergency

PDO Communication synchronized, remotely request and event driven (change of state) max. 64 Rx/TxPDO max. 512 Rx/TxPDO

CAN 11 Bit 11 Bit

PROFIBUS Slave Master

Slave max. 125 Cyclic Data max. 488 Bytes 7168, 255 Bytes DPV1 Class 1, 2 yes yes Configuration Data 244 Bytes 244 Bytes/Slave Appl. specific Parameter 237 Bytes 237 Bytes/Slave

AS-Interface Master Slaves max. 62 Cyclic Data max. Digital 62 Byte (4Bit/Byte)

Analog 31 Slaves x 4x16Bit Ayclic Data 220 Bytes/Request Functions Transactionstypes 1-5, Profil for ext. Master: M4 Version 3.0

EtherCAT Slave Master

Slaves max 200

Cyclic Data max. 512 Bytes 11520 Bytes

Acyclic Data SDO Master/Slave CoE (CANopen over EtherCAT) SDO Slave/Slave Up-/Download, max. 1500 Bytes

Functions COE Get OD List Emergency, Complex Slave Emergency, Topology: Line 3 FMMUs and 4 SYNC-Manager Distributed Clocks

Article System Interface Operating Voltage Operating Temperature Dimensions (L x H x W)

CIFX 50-XX PCI, 33 MHz DPM, IO-DMA 3,3 V / typ. 650 mA -20 ... +55°C 120 x 86 x 18,5mm

CIFX 50E-XX PCI Express, One-Lane Port 3,3 V / typ. 800 mA 0 ... +55°C 120 x 73,2 x 18,5mm

CIFX 104-XX PC/104, 33 MHz DPM 3,3 V / typ. 650 mA -20 ... +70°C 97 x 91 x 24mm

CIFX 104C-XX PCI 104, 33 MHz DPM 3,3 V / typ. 650 mA -20 ... +70°C 97 x 91 x 24mm

CIFX REALTIME- ETHERNET UNITS PRICE

Article Description in Euro

PCI Communication Interface netX for Real-Time-Ethernet - 2x RJ45

PCI Express Communication Interface netX for Real-Time-Ethernet - 2x RJ45

PC-Card Mini PCI for Real-Time-Ethernet - 2x RJ45

PC/104(ISA) Communication Interface netX for Real-Time-Ethernet - 2x RJ45

PCI-104(PCI) Communication Interface netX for Real-Time-Ethernet - 2x RJ45

NXLIC netX-Master Licence for EtherNet/IP, EtherCAT, PROFINET

MRP extension for PN master license

CIFX FELDBUS UNITS PRICE Article Description in Euro

PCI Interface netX for PROFIBUS/Slave - SubD Buchse 9-pol.

PCI Interface netX for CANopen/Slave - SubD Stecker 9-pol.

PCI Interface netX for DeviceNet/Slave - COMBICON 5-pol.

PCI Interface netX for 2x AS-Interface Master - 2x COMBICON 2-pol.

PCI Express Interface netX for PROFIBUS/Slave - SubD Buchse 9-pol.

PCI Express Interface netX for CANopen/Slave - SubD Stecker 9-pol.

PCI Express Interface netX for DeviceNet/Slave - COMBICON 5-pol.

PCI Express Interf.netX for 2x AS-Interface Master - 2x COMBICON 2 pol.

PCI Interface netX for 2x PROFIBUS/Slave - 2x SubD Buchse 9-pol.

PC-Karte Mini PCI für PROFIBUS DP

PC/104(ISA) Interface netX for PROFIBUS/Slave - SubD Buchse 9-pol.

PC/104(ISA) Interface netX for CANopen/Slave - SubD Stecker 9-pol.

PC/104(ISA) Interface netX for DeviceNet/Slave - COMBICON 5-pol.

PCI-104(PCI) Interface netX for PROFIBUS/Slave - SubD Buchse 9-pol.

PCI-104(PCI) Interface netX for CANopen/Slave - SubD Stecker 9-pol.

PCI-104(PCI) Interface netX for DeviceNet/Slave - COMBICON 5-pol.

NXLIC netX-Master Licence for PROFIBUS, CANopen, DeviceNet


PROFINET IO Device Controller

IO Devices max. 128 Cyclic Data max. 2048 Bytes (IOCR) 11472 Bytes Acyclic Data Read/Write Record, max 1024 Read/Write Record, max. 4096

Bytes/Telegram Bytes/Request Functions Alarmtreatment, DCP minimum cycle time1 ms

Class 1&2 (unsynchronisiert) Alarmtreatment Class 3 (synchronised) Context Management by CLRPC DCP Diagnostic, max. 200 Bytes/Telegram Context Management throug CLRPC target-actual comparison configuration per Device one buffer for diagnostic for max. 244 Module, 1 Submodul data available

Topologydetection LLDP, SNMP V1, MIB 2, Physik. Device

TECH

NICA

L DA

TA

The configuration software SYCON.NET is included in the delivery with all CIFX-Interfaces!

PROFIBUS/MPI

Ethernet

NT50-MPINL50-MPI

NT 50-MPI 580,-

NL 50-MPI 510,-

+24 V

COMMUNICATION


36


PROTOCOL CONVERTER

netLINK / netTAP-MPI - Ethernet to MPI / DP / PPI Converter for SIMATIC S7®

MICRO-CONVERTER PRICE Article Description in Euro

Micro-converter Ethernet TCP/IP to S7-MPI/PROFIBUS-DP (up to 12Mbps) in the box of a NetTAP50. Supply: 24VDC. For the use with STEP®7 of SIEMENS.

Micro-converter Ethernet TCP/IP to S7-MPI/PROFIBUS-DP (up to 12Mbps) in the box of a Profibus-connector. Supply: 24VDC or via PG-Connector. For the use with STEP® of SIEMENS

Technical Data

netLINK MPI netTAP MPI Operating Temperature ±0°C … +55°C ±0°C … +60°C Power supply +18 … +30 V/approx. 60mA @ +24 V +18 … +30 V/approx. 130mA @ +24 V Dimensions (L x W x H) 65 x 48 x 16 mm 100 x 52 x 70 mm

Supply Mini-COMBICON 3,81mm 2-pole orMini-COMBICON 3,81mm 2-pole

S7 DSub-9 MPI / PROFIBUS

Processor netX 50 netX 50

Interfaces Fast Ethernet 10/100 BASE-TX, Fast Ethernet 10/100 BASE-TX, MPI/PROFIBUS 12 MBaud IEC 61158 MPI/PROFIBUS 12 MBaud IEC 61158

LEDs SYS, COM, ACT, LNK SYS, COM, ACT, LNK Weight approx. 40 g approx. 150 g Emission CISPR 11 Class A CISPR 11 Classe A Noise Immunity EN 61131-2:2003 EN 61131-2:2003

Supoorted PLCsSIMATIC S7® 200,300,400 CPU/CPs SIMATIC S7® 200,300,400 CPU/CPs with MPI/PROFIBUS/PPI Interface with MPI/PROFIBUS/PPI Interface

Highlights • Parallel communication to 32 PLCs with up to 16 TCP connections • Direct PLC to PLC communication, also as projected connection • For all S7 Engineering Tools inclusive TIA Portal • Web based confi guration, protocol support of RFC1006 and DHCP • Full access to PROFIBUS diagnostics and services in STEP7® • Automatic DP/MPI baud rate detection

Controller

Programming Tool

Visualization System

As directly mountable or as firmly attachable DIN rail mountable device the adaptors netLINK- and netTAP-MPI are replacing expensive CP communications processors and allow the programming, visualization and control of S7-200®, S7-300® or S7-400® PLCs over Ethernet. The provided driver integrates into all well-known SIMATIC S7® engineering tools like STEP7® or TIA portal as PG/PC programming interface. The device is setup within the engineering tool or with conventional web browsers over the integrated web confi guration pages. The adaptors are suitable to program or change S7-PLC control programs and may serve to engineer HMI devices with the visualization software WinCC. By supporting the „ISO on TCP“ RFC1006 Ethernet protocol any third party or SIMATIC® visualization stations can be coupled to the PLC.

Once integrated into the office or plant network and connected to the internet also remote maintenance and logging over a router is possible since plain TCP/IP protocol access mechanisms are used. Organized in a network direct communication between two or several PLCs over Ethernet can be realized. Even a coupling of PLCs with no own Ethernet port is possible using two adapters in conjunction. Featuring full PROFIBUS diagnostics and Master Class 2 DPV1 services enables unrestricted DP Slave device configuration and parameterization in STEP7®. Power is supplied by a 24 V DC. If supported by the S7 PLC the netLINK-MPI adaptor may be powered over the DSUB9 connector alternatively and its extra feed-through DSUB9 connector allows the connection of further devices to the same MPI/DP network.

Ethernet upgrade for S7-PLCs with MPI/DP/PPI port

NL 51N-DPL 200,-

NL51-DPL

NT51-PROXY

PROFINET Device

+24 V

PROFIBUS Device

COMMUNICATION


37


PROTOCOL CONVERTER netLINK51 PROXY - PROFIBUS to PROFINET PROXY in connector format

netLINK PROXY integrates a PROFIBUS-DP slave into any superordinate PROFINET network. As connector the device is plugged directly onto the PROFIBUS-DP interface of the DP-Slave and connects to the PROFINET network via its RJ45 socket. On PROFINET side netLINK behaves like an ordinary IO device. The DP-Slave’s process data are mapped in accordance with the present PI-organisation’s guideline into the PROFINET slot/subslot addressing model. Commissioning is done via the Ethernet port with either a direct connection to the PC or if already installed and during run time via a PROFINET switch. netLINK PROXY is configured with the FDT/DTM based planning, configuration and diagnostic tool SYCON.net.

With few steps netLINK is getting operative. In case there is no slave GSD file available, a scan function is able to identify the slave on PROFIBUS. After the configuration and the I/O process data length is known, SYCON.net converts the parameters automatically into a standardized GSDML file. This file imports to any PROFINET controller configuration utility and gets netLINK into operation effortless. The netLINK Proxy is supplied by 24 V. During mounting the voltage can be tapped comfortably from the DP-Slave and be led to the 2-pin COMBICON connector. The short distance on PROFIBUS makes a terminator unnecessary. netLINK PROXY – a cost-efficient and handy alternative to redevelopments to get existing DP devices integrated straightforward into the PROFINET world.

MICRO-CONVERTER PRICE Article Description in Euro

Micro converter ProfiNet to PROFIBUS-DP-Link (up to 12MBd) in the box of a Profibus-connector. Power supply: 24VDC

Controller

Highlights • Integrates a single DP-Slave into PROFINET network • For direct mounting on DP interface • Compatible to any PROFIBUS Slave • Automatic GSDML file generation from GSD file for PROFINET controller configuration • Works in accordance with PI-organization’s proxy guideline

Turning any PROFIBUS slave into PROFINET device

Technical Data

netLINK 51 PROXY

Operating Temperature ±0°C … +50°C

Power supply +18 … +30 V/approx. 100mA @ +24 V Dimensions (L x W x H) 65 x 48 x 16 mm Processor netX 50

Mini-COMBICON 2-pole Connectors RJ45-female connector

DSub 9-pin male connector Emission CISPR 11 Class A Noise Immunity EN 61131-2:2003 Weight approx. 40 g LEDs SYS, COM,Link, Rx/Tx Certifications CE Sign

NT50-MPI

NT 50-RS-EN 263,-

NT 50-CO-RS 263,-

NT 50-CO-EN 263,-

NT 50-DN-RS 263,-

NT 50-DN-EN 263,-

NT 50-DP-RS 263,-

NT 50-DP-EN 263,-

COMMUNICATION


36


PROTOCOL CONVERTER

netTAP 50 - Low-Entry Gateway for Industrial Automation networks

netTAP 50 is a protocol converter for simple conversions. netTAP 50 converts 1-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave to slave or slave to master conversions are supported. As a master, netTAP 50 provides full master functionality to one slave device only. This makes it easy to integrate a single field device into any higher-level network. The design impresses with a cost-optimized, compact hardware implementation being reduced to the elementary requirements of a protocol converter. The converter addresses market segments which set the focus on cost savings. The cost-reduced design combined with its countless conversion possibilities

makes netTAP 50 an attractive gateway in terms of price and universality. netTAP is configured and diagnosed by the universal FDT/DTM technology based configuration tool SYCON.net. LED indicators are visualizing status information for rapid on-site diagnostics. The protocol conversions are preprogrammed and loaded as firmware into the device on demand. Conversions needing the same physical network interface can be managed by a single device variant. So a device can be for example a PROFIBUS slave on one hand or a PROFIBUS master by a simple firmware change on the other.

PROTOCOL CONVERTER PRICE Order No.: Data in Euro

netTAP50 Gateway RS232/422/485 - Ethernet

netTAP50 Gateway CANopen - RS232/422/485

netTAP50 Gateway CANopen - Ethernet

netTAP50 Gateway DeviceNet - RS232/422/485

netTAP50 Gateway DeviceNet - Ethernet

netTAP50 Gateway PROFIBUS-DP - RS232/422/485

netTAP50 Gateway PROFIBUS-DP - Ethernet

Highlights • Parallel communication to 32 PLCs with up to 16 TCP connections • Direct PLC to PLC communication, also as projected connection • For all S7 Engineering Tools inclusive TIA Portal • Web based configuration, protocol support of RFC1006 and DHCP

I/O protocol gateway for basic conversions

Technical Data

netTAP 50

Operating temperature ±0… +60 °C Power Supply +18 … +30 V / 130 mA @ +24 V Dimensions (L x W x H) 100 x 25 x 70 mm (without connector) Weight approx. 80 g Diagnostic Interface Ethernet, RJ45-Buchse Displays SYS, COM,Link, Rx/Tx, protocol specific Configuration SYCON.net, Windows® 7 or higher Connector Mini-COMBICON 2-pin Mounting DIN-Rail, DIN EN 60715 Certification CE Sign RS232/485/422 not electrically isolated Emission CISPR 11 Class A Noise Immunity EN 61131-2:2003

Maximum Cyclic Process Data Master Slave

ASCII 1000 Bytes I/O-Data CANopen 1024 1024 Bytes I/O-Data CC-Link 736 Bytes I/O-Data DeviceNet 510 510 Bytes I/O-Data EtherNet/IP 1008 1008 Bytes I/O-Data Modbus RTU 1024 1024 Bytes I/O-Data Modbus TCP 1024 1024 Bytes I/O-Data PROFIBUS 488 488 Bytes I/O-Data PROFINET 2048 2048 Bytes I/O-Data

Ordering example: PROFIBUS Master to EtherNet/IP Slave = NT 50-DP-EN * Master license included; supports Master functionality to one slave (Modbus RTU/TCP without limitations)

The maximum convertible number of I/O data of a protocol combination is determined by the protocol with the lower amount if I/O Data. Note: All technical data may be changed without further notice.

NT 100-CO-DN 603,-

NT 100-CO-DP 603,-

NT 100-DN-CO 603-

NT 100-DN-DP 603,-

NT 100-DP-CO 603,-

NT 100-DP-DN 603,-

NT 100-DP-DP 603,-

NT 100-DP-RS 481,-

NT 100-RE-RS 481,-

NT 100-RE-CO 603,-

NT 100-RE-DN 603,-

NT 100-RE-DP 603,-

MASTERLIZENZ 167,-

MRPLiezenz 167,-

NT100-MPI

Highlights • Parallel communication to 32 PLCs with up to 16 TCP connections • Direct PLC to PLC communication, also as projected connection • For all S7 Engineering Tools inclusive TIA Portal • Web based configuration, protocol support of RFC1006 and DHCP

Technical Data

netTAP 100

Operating temperature ±0… +60 °C Power Supply +18 … +30 V / 130 mA @ +24 V Dimensions (L x W x H) 100 x 52 x 70 mm (without connector) Weight approx. 150 g Diagnostic Interface Mini USB Displays SYS, COM, Link, Rx/Tx, protocol specific Configuration SYCON.net, Windows® 7 or higher Connector Mini-COMBICON 2-pin Mounting DIN-Rail, DIN EN 60715 Certification CE Sign, UL 508 Emission CISPR 11 Class A Noise Immunity EN 61131-2:2003

COMMUNICATION


37


PROTOCOL CONVERTER

netTAP 100 - High-end Gateway for Industrial Automation networks


netTAP100 Gateway CANopen - DeviceNet

netTAP100 Gateway CANopen - PROFIBUS-DP

netTAP100 Gateway DeviceNet - CANopen

netTAP100 Gateway DeviceNet - PROFIBUS-DP

netTAP100 Gateway PROFIBUS-DP - CANopen

netTAP100 Gateway PROFIBUS-DP - DeviceNet

netTAP100 Gateway PROFIBUS-DP - PROFIBUS-DP

netTAP100 Gateway serial RS232/422/485 - PROFIBUS-DP

nnetTAP100 Gateway serial RS232/422/485 - fieldbus

netTAP100 Gateway RT-Ethernet - DeviceNet

netTAP100 Gateway RT-Ethernet - PROFIBUS-DPP

netTAP100 Gateway RT-Ethernet - Modbus TCP

Master / Controller License for RT-Ethernet, PROFIBUS-DP a.s.o.


netTAP 100 is the protocol converter for sophisticated conversions and supports 2-port Real-Time Ethernet to serial, Fieldbus to Fieldbus, Real-Time Ethernet to Fieldbus and Real-Time Ethernet to Ethernet automation protocols. It supports slave and master functionality in any combination. Master functionality is unrestricted when licensed. A memory card slot allows the user to save firmware and configuration data on a removable card. In case of failure all that is necessary to bring the plant back on line within seconds is to move the memory card from the old netTAP 100 onto a spare unit. Apart from standard protocols, netTAP 100 supports the creation of serial protocols with the Lua-based scripting language netSCRIPT. A full featured development environment is included within the delivery. It allows the comfortable and rapid programming of any proprietary serial protocol as well as the I/O data pre-processing during the conversion into the other field protocol.

I/O protocol gateway for demanding conversions

Ordering example: PROFIBUS Master to EtherNet/IP Slave = NT 100-RE-DP * Master license must be ordered separately (Modbus RTU/TCP without limitations)


ASCII 1024 Bytes I/O-Data CANopen 7168 1024 Bytes I/O-Data CC-Link 736 Bytes I/O-Data DeviceNet 7168 510 Bytes I/O-Data EtherCAT 11472 400 Bytes I/O-Data EtherNet/IP 11472 1008 Bytes I/O-Data Modbus RTU 11520 11520 Bytes I/O-Data Modbus TCP 1024 1024 Bytes I/O-Data netSCRIPT 2048 Bytes I/O-Data POWERLINK 2980 Bytes I/O-Data PROFIBUS 11472 488 Bytes I/O-Data PROFINET 11472 2048 Bytes I/O-Data Sercos 11472 256 Bytes I/O-Data


NT 151-RE-RE 602,-

167,-

MRPLizenz 167,-

NT151-RE-RE



COMMUNICATION

38

PROTOCOL CONVERTER

netTAP 151 - High-end Gateway for Real-Time Ethernet Networks


netTAP151 Gateway RT-Ethernet - RT-Ethernet

MASTERLIZENZ Master / Controller License for RT-Ethernet


The gateway netTAP 151 transmits IO data bidirectionally between any two industrial Real-Time Ethernet networks. It is the ideal solution for installations with heterogeneous networks or such of the same kind to exchange data across given network boundaries. With more than 25 different combinations of the protocols PROFINET, EtherCAT, EtherNet/IP, POWERLINK, Sercos and Modbus TCP, the device series provides a solution for any conversion. The integration as simple I/O device into the primary network makes the converter compatible with any common PLC. On the secondary side it works either as I/O device too or controls a subordinate network as a bus master. The length of the I/O data can be scaled to any application and the data in between can be mapped on byte level arbitrarily.

Secure network separation is provided by two Ethernet controllers, each connected to a Dual Ethernet port with integrated switch. That allows realizing star, ring and inline network topologies without further peripherals. Both controllers handle the protocols independent from each other and exchange only the I/O data across a data buffer. An overall data processing time lower than 10 milliseconds is achieved. The devices can be ordered preloaded with fi rmware and license or unloaded. Unloaded devices minimize the storage costs. Subsequent loading of a firmware configures these devices for any conversion most fl exible. All devices are commissioned and diagnosed network independent over USB.

I/O protocol gateway for basic conversions

Highlights • Bridging between two Real-Time Ethernet networks • Flexible choice of operating modes Slave/Master or Slave/Slave • Effortless integration as standard I/O device • Secure network segregation via internal data buffer • Fast conversion time less than 10 milliseconds

Technical Data

netTAP151

Operating temperature -20 °C .. +60 °C Power Supply +18 … +30 V / 190 mA @ +24 V Dimensions (L x W x H) 99 x 22,5 x 114,5 mm (without connector) Weight 121 g Service Interface Mini USB Displays LED SYS, APL, protocol specific Configuration SYCON.net, Windows® 7 Connector Mini-COMBICON 5-pin Mounting DIN-Rail, DIN EN 60715 Emission EN55011 / CISPR 11 Class A Noise Immunity EN 61000-6-2 Certification CE Sign, UL, cUL Card Slot SD card


EtherCAT 9200 512 Bytes I/O-Data

EthetNet/IP 11472 1008 Bytes I/O-Data POWERLINK 1490 Bytes I/O-Data PROFINET 11472 1048 Bytes I/O-Data Sercos 11472 240 Bytes I/O-Data Modbus TCP 11520 11520 Bytes I/O-Data


Note: All technical data may be changed without further notice.


39

COMMUNICATION

On demand

netIOT Edge Gateways securely connect automation networks with Cloud or IoT directed application. As field devices they exchange cyclic IO data with the PLC and communicate furthermore with IoT capable field devices over OPC UA or MQTT directly. This real-time field data build the basis for intelligent IoT applications of cyber-physical processes in ERP/CRM systems in modern M2M enterprise solutions. Integrated security mechanisms such as physical separation of the OT network and the IT network, a trusted operating system, the execution of signed firmware and packets only and the usage of encryption techniques of the latest standards are securing the data integrity and protecting against any kind of data theft. The web based IoT wiring editor Node-RED serves to configure the data flow in the devices. Data apps and profiles are created herein in minutes with over 70 predefined function blocks called „nodes“. Features in addition to this set for the otherwise closed gateways are available on demand as netIOT Service products. Available are native cloud connectors to specific cloud solutions for post installation or services such as software adaptions and manymore. Own software can be deployed on the system additionally using the preinstalled container software Docker.

Highlights • Effortless integration into the automation network as

standard field device • Rapid modeling of the data flow between field and

application with IoT editor Node-RED • Direct OPC UA / MQTT communications to IoT capable

field devices in parallel to the PLC • Trusted platforms due to secured boot • With container environment Docker for own software

Maximum Security • Physical separation of OT automation and IT Cloud network

avoids mutual attacks • Start of signed software only protects against manipulation

and secures device integrity • Data encryption according the latest state of technology

against electronic eavesdropping and data theft

Pre-Installed Software Packages

• For data acquisition from the shop floor • PLC access • OT network and fi eldbus access • OPC UA technology support

• For data processing engineering with Node-RED and Edge Analytics with Informix for Cloud/IT applications • Analytics with Informix for Cloud/IT applications

• OPC UA and MQTT technology support • Docker technology on board • IP Routing and Network Address Translation • Public Key Infrastructure (PKI) Management

NETIO EDGE

Edge gateways for Automation Networks

CATALOG - Gogatec

Documents

Transcript of CATALOG - Gogatec