CATAlog 99-05 - Rotary Milling Machine, Rotary - · PDF fileA work of art... and function. Our...

A work of art... and function.Our rotary tables are customizable to perfectly match your specifications. Outstanding

performance combined with immediate customer service response guarantees minimal

to zero outages. Our rotary tables will help you meet your production goals.

CATAlog 99-05

TROYKE - CINCINNATI, OH PHONE - 513.769.4242 FAX - 513.769.6362 WWW.TROYKE.COM

DL-10-A-RH

DCB

G

A

E

F

MODEL A B C D* E F GDL-6.5-A*1 5.118 [130.0] 7.50 [191] 5.25 [133] 19.38 [492] 5.50 [140] N/A 11.81 [300]

DL-9-A 6.375 [161.9] 9.50 [241] 6.43 [163] 20.37 [517] 5.00 [127] 3.81 [97] 11.31 [287]

DL-10-A 7.000 [177.8] 10.25 [260] 7.56 [192] 22.50 [517] 5.62 [143] 5.87 [149] 13.00 [330]

DL-12-A 8.500 [215.9] 12.00 [305] 8.56 [217] 23.50 [596] 6.00 [152] 6.18 [157] 15.00 [381]

DL-15-A 10.000 [254.0] 14.87 [378] 10.00 [254] 25.56 [649] 6.00 [152] 6.18 [157] 18.00 [457]

DL-16.5-A*1 10.000 [254.0] 17.25 [438] 11.50 [291] 11.75 [298] 9.25 [234] N/A 18.50 [469]

DL-20-A 12.000 [304.8] 21.00 [533] 13.06 [332] 25.25 [641] 7.87 [200] 7.93 [201] 21.87 [556]

DL-25-A 14.750 [374.6] 21.00 [533] 13.06 [332] 25.25 [641] 7.87 [200] 7.93 [201] 27.38 [695]

SPECIFICATIONS

MODEL DL-6.5-A DL-9-A DL-10-A DL-12-A DL-15-A DL-16.5-A DL-20/25-A

TURNTABLE DIAMETER [MM] 6.50 [165] 9.00 [229] 10.00 [254] 12.00 [304] 15.00 [381] 16.500 [419] 20.00 [508]

STANDARD THRU HOLE DIA [MM] 1.181 [30.0] 1.181 [30.0] 1.968 [50.0] 1.968 [50.0] 1.968 [50.0] 6.350 [161.2] 2.000 [50.8]

OVERSIZE THRU HOLE DIA [MM] N/A N/A 3.000 [76.2] 4.125 [104.8] 4.125 [104.8] N/A 10.250 [260.4]

MAXIMUM THRU HOLE DIA [MM] N/A N/A 4.50 [143.0] *1 6.100 [154] *2 6.00 [152.4] N/A 12.500 [317.5]*2

HORIZONTAL LOAD CAPACITY [KG] N/A 150 [68] 800 [363] 800 [363] 800 [363] N/A 4000 [1818]

VERTICAL LOAD CAPACITY [KG] 75 [34] 100 [45] 300 [136] 300 [136] 300 [136] 1,000 [454] 2000 [909]

FACEPLATE T-SLOT WIDTH [MM] .47 [12] X 4 .47 [12] X 4 .47 [12] X 4 .47 [12] X 8 .63 [16] X 8 .63 [16] X 8 .56 [14.2] X 8

STANDARD TOTAL GEAR RATIO 90:1 180:1 180:1 180:1 180:1 180:1 180:1

ALTERNATE TOTAL GEAR RATIO 120:1 360:1 360:1 360:1 360:1 360:1 360:1

MAX. SPEED RANGE (STD RATIO) 0-22 RPM 0-10 RPM 0-10 RPM 0-10 RPM 0-10 RPM 0-10 RPM 0-10 RPM

STD. CONT. TORQUE LBS-FT [NM] 94 [127] 187 [254] 375 [508] 375 [508] 375 [508] 375 [508] 750 [1017]

BRAKE METHOD PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATIC

BRAKE TORQUE LBS-FT [NM] 125 [169] 125 [169] 300 [407] 345 [468] 345 [468] 800 [1085] 800 [1085]

PROGRAMMABLE RESOLUTION .001 DEG. .001 DEG. .001 DEG. .001 DEG. .001 DEG. .001 DEG. .001 DEG.

STD. TOTAL ANGULAR ACCURACY 60 SEC. 30 SEC. 30 SEC. 30 SEC. 30 SEC. 30 SEC. 20 SEC.

STD. REPEATABILITY 10 SEC. 10 SEC. 10 SEC. 10 SEC. 10 SEC. 10 SEC. 5 SEC.

OPT. (H OR I) ANGLR. ACCURACY +/-5 +/-5 +/-5 +/-3.6 +/-5 +/-3.6 +/-5 +/-3.6 +/-5 +/-3.6 +/-5 +/-3.6

OPT. (H OR I) REPEATABILITY +/-2 +/-2 +/-2 +/-1 +/-2 +/-1 +/-2 +/-1 +/-2 +/-1 +/-2 +/-1

UNIT WEIGHT LBS [KG] 109 [49] 144 [65] 205 [92] 253 [114] 347 [156] 400 [179] 690 [310]

SHIP WEIGHT LBS [KG] 159 [72] 194 [87] 255 [115] 303 [136] 397 [179] 450 [202] 825 [371]

Horizontal or Vertical Mount

Standard Features:• 8sizes(6.5”-25”tablediameters)• Dualleadwormsetsimplifiesbacklashadjustment• C907bronzewormgearandhardenedandgroundworm running in a bath of oil• Highprecisionspindlebearings• Turcitebearingsurface• Internalpneumaticbrake(16.5”,20”,&25”dualrack&pinion)• Precisiongroundsurfaces

Optional Features:• Chucks-(ManualorPneumatic)• Colletfixtures-(ManualorPneumatic)• Tailstocks-(ManualorPneumatic)• SingleAxisprogrammablecontrol• Clampingoutboardsupports(Pneu.orHyd.)• Balllock™subplateandfixtureplate• Cables-forinterfacingtomachinetool• Compatiblewithallstandardservomotors• Oversizethruhole• Directmountfeedback(Heidenhainscale for accuracy up to +/- 2 arc seconds)

DL-15-A-LH

*Depends on type of servo motor *1 Vertical mount only *2 Table is less the pneumatic brake.

troykeº DL Series - A Model

1

T roykeManufacturingCompany has been manufacturing Rotary Tables since 1939.

During that period we have evolved from a manufacturer of Manual Rotary Tables to a manufacturer of 4TH and 5THaxisRotaryPositioningSystemsthatwillincreaseproductivity on any Vertical Machining Center.

TroykeRotaryTableaccuracyisachievedthroughqualitymanufactured parts and custom manufactured Dual Lead Worm Gearsets designed specifically for each individual Troykemodel.WechoseDualLeadfortheirwormgearefficiency,lowbacklash,rigidity,andexcellentwearcharacteristics.

We offer a wide range of Rotary and Rotary/Tilt Tables. Ourproductlinehasexpandedto12RotaryTablemodelsrangingfrom6.5”to84”diameterand5Rotary/TiltTablemodelsrangingfrom6.5”to30”diameter.Our products are versatile and lend themselves to modifications from the standard to accommodate a variety of custom applications.

Throughcontinuousimprovement,TroykeRotaryTables have evolved into the most rigid, versatile, and cost effectivehighqualityproductsintheindustry.

troykeº Rotary Tables …DL SERIES ..... 1-2

NC SERIES ..... 3-5

HDL SERIES .. 6

HBM SERIES .... 7

CTL SERIES ... 8-9

TDL SERIES ..... 10

L SERIES .......... 11

TT SERIES ....... 12

ACCESSORIES:Tailstocks .............................................13 Workholding ......................................14 Controls ..............................................15 Accuracy .............................................16 How to Order Rotary Tables .........17

TROYKE - CINCINNATI, OH PHONE - 513.769.4242 FAX - 513.769.6362 WWW.TROYKE.COM TROYKE - CINCINNATI, OH PHONE - 513.769.4242 FAX - 513.769.6362 WWW.TROYKE.COM

MODEL A B C D E F GNC-30-A 17.75 [450] 29.75 [755] 19.50 [495] 42.68 [1084] 8.25 [209] 8.50 [215] 32.75 [831] NC-36-A 20.00 [508] 29.75 [755] 19.50 [495] 42.68 [1084] 8.25 [209] 8.50 [215] 32.75 [831] NC-42-A 27.00 [685] 43.00 [1092] 26.50 [673] 48.75 [1238] 30.00 [762] 10.50 [266] 50.00 [1270] NC-48-A 27.00 [685] 43.00 [1092] 26.50 [673] 48.75 [1238] 30.00 [762] 10.50 [266] 50.00 [1270] NC-60-A 35.50 [901] 62.00 [1574] 31.00 [787] 43.00 [1092] 30.50 [774] 10.50 [266] 65.50 [1663] NC-84-A 43.00 [1092] 62.00 [1574] 42.00 [1066] 43.00 [1092] 30.50 [774] 10.50 [266] 85.00 [2159]

SPECIFICATIONSMODEL NC-30-A NC-36-A NC-42-A NC-48-A NC-60-A NC-84-ATURNTABLE DIAMETER [MM] 30.00 [762] 36.00 [914] 42.00 [1066] 48.00 [1219] 60.00 [1524] 84.00 [2133]

STANDARD THRU HOLE DIA [MM] 1.500 [38] 1.500 [38] 3.000 [76] 3.000 [76] 3.000 [76] 3.000 [76]

OVERSIZE THRU HOLE DIA [MM] 10.250 [260] 10.250 [260] 14.000 [357] N/A 20.000 [508] 20.000 [508]

MAXIMUM THRU HOLE DIA [MM] 16.000 [406] 16.000 [406] 18.000 [457] N/A 30.000 [762] 30.000 [762]

HORIZONTAL LOAD CAPACITY [KG] 4,000 [1813] 4,000 [1813] 7,000 [3173] 7,000 [3173] 15,000 [6800] 15,000 [6800]

VERTICAL LOAD CAPACITY [KG] 2,000 [906] 2,000 [906] 4,000 [1813] 4,000 [1813] 7,000 [3173] 7,000 [3173]

FACEPLATE T-SLOT WIDTH [MM] .68 [17.2] X 6 .68 [17.2] X 6 .81 [20.5] X 6 .81 [20.5] X 6 .81 [20.5] X 6 .81 [20.5] X 6

STANDARD TOTAL GEAR RATIO 360:1 360:1 360:1 360:1 720:1 720:1

ALTERNATE TOTAL GEAR RATIO 180:1 720:1 180:1 720:1 180:1 720:1 180:1 720:1 1440:1 1440:1

MAX. SPEED RANGE (STD RATIO) 0-5 0-5 0-4 0-4 0-2 0-2

STD. CON. TORQUE LBS-FT [NM] 3,000 [4053] 3,000 [4053] 4,500 [6079] 4,500 [6079] 9,000 [12159] 9,000 [12159]

BRAKE METHOD PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATIC

BRAKE TORQUE LBS-FT [NM] 1111 [1506] 1111 [1506] 1550 [2102] 1550 [2102] 2950 [4000] 2950 [4000]

PROGRAMMABLE RESOLUTION .001 DEG. .001 DEG. .001 DEG. .001 DEG. .001 DEG. .001 DEG.

STD. TOTAL ANGULAR ACCURACY 20 SEC. 20 SEC. 40 SEC. 40 SEC. 40 SEC. 40 SEC.

STD. REPEATABILITY 5 SEC. 5 SEC. 10 SEC. 10 SEC. 10 SEC. 10 SEC.

OPT. (H OR I) ANGLR. ACCURACY +/-5 +/-3.6 +/-5 +/-3.6 +/-5 +/-3.6 +/-5 +/-3.6 +/-5 +/-3.6 +/-5 +/-3.6


UNIT WEIGHT LBS [KG] 1,400 [630] 1,500 [675] 4,200 [1890] 4,350 [1957] 5,500 [2475] 6,150 [2767]

SHIP WEIGHT LBS [KG] 1,550 [697] 1,650 [742] 4,500 [2025] 4,650 [2092] 5,800 [2610] 6,500 [2925]

HorizontalMount-VerticalMount(42”-84”requiresAngleBracketOption)

Standard Features:• 6sizes(30”-84”tablediameters)• C907bronzewormgearandhardenedandgroundworm running in a bath of oil• Highprecisionspindlebearings• Turcitebearingsurface• Dualrack&pinionpneumaticbrake

• Precisiongroundsurfaces

Optional Features:• Chucks-(ManualorPneumatic)• Tailstocks-(ManualorPneumatic)• SingleAxisprogrammablecontrol• Clampingoutboardsupports(PneumaticorHydraulic)• BallLock™subplate• Cables-forinterfacingtomachinetool• Compatiblewithallstandardservomotors• Directmountfeedback (Heidenhain scale for accuracy up to +/- 2 arc seconds)

NC-42-A-LH w/ OPTIONAL AB-42

* Depends on type of servo motor

3

F

NC-42-A-RH w/ AB-42 ANGLE PLATEG

A

EC D

B

troykeº NC Series - A Model

MODEL A B C D E* F G H

DL-6.5-B 5.118 [130.0] 7.50 [191] 5.25 [133] 7.25 [184] 17.50 [444] 5.50 [140] 8.75 [222] 11.62 [295]

DL-9-B 6.375 [161.9] 9.50 [241] 6.43 [163] 8.31 [211] 16.50 [419] 5.00 [127] 11.31 [287] 12.43 [316]

DL-10-B 7.000 [177.8] 9.75 [248] 7.25 [184] 8.12 [206] 18.25 [463] 7.25 [184] 12.50 [318] 13.68 [348]

DL-12-B 8.500 [215.9] 12.00 [305] 8.50 [216] 9.68 [246] 18.56 [471] 7.50 [191] 15.00 [381] 14.62 [371]

DL-15-B 10.00 [254.0] 14.87 [378] 10.00 [254] 10.88 [276] 20.88 [530] 8.00 [203] 18.00 [457] 14.81 [376]

DL-16.5-B 10.00 [254.0] 17.25 [438] 11.50 [291] 12.25 [311] 23.75 [603] 9.25 [234] 18.50 [469] 16.00 [406]

DL-20-B 13.00 [330.0] 21.00 [533] 13.06 [332] 14.00 [355] 27.06 [687] 10.12 [258] 23.00 [584] 16.00 [406]

DL-25-B 15.75 [400.0] 21.00 [533] 13.06 [332] 14.00 [355] 27.06 [687] 10.12 [258] 25.75 [654] 16.00 [406]

SPECIFICATIONS

MODEL DL-6.5-B DL-9-B DL-10-B DL-12-B DL-15-B DL-16.5-B DL-20/25-B

TURNTABLE DIAMETER [MM] 6.5 [165] 9.0 [229] 10.0 [254] 12.0 [304] 15.0 [381] 16.5 [419] 20.0 [508]

STANDARD THRU HOLE DIA [MM] 1.181 [30.0] 1.181 [30.0] 1.968 [50.0] 1.968 [50.0] 1.968 [50.0] 6.350 [161.2] 2.000 [50.8]

OVERSIZE THRU HOLE DIA [MM] N/A N/A 3.000 [76.2] 4.125 [104.8] 4.125 [104.8] N/A 10.250 [260.4]

MAXIMUM THRU HOLE DIA [MM] N/A N/A 4.50 [143.0] *2 6.100 [154] *2 6.00 [152.4] N/A 12.500 [317.5] *2

VERTICAL LOAD CAPACITY [KG] 75 [34] 100 [45] 300 [136] 300 [136] 300 [136] 1,000 [454] 2,000 [909]

FACEPLATE T-SLOT WIDTH [MM] .47 [12] X 4 .47 [12] X 4 .47 [12] X 4 .47 [12] X 8 .63 [16] X 8 .63 [16] X 8 .56 [14.2] X 8

STANDARD TOTAL GEAR RATIO 90:1 180:1 180:1 180:1 180:1 180:1 180:1

ALTERNATE TOTAL GEAR RATIO 120:1 180:1 360:1 120:1 180:1 360:1 120:1 360:1 360:1

MAX. SPEED RANGE (STD RATIO) 0-22 RPM 0-10 RPM 0-10 RPM 0-10 RPM 0-10 RPM 0-10 RPM 0-10 RPM

STD. CONT. TORQUE LBS-FT [NM] 94 [127] 187 [254] 375 [508] 375 [508] 375 [508] 375 [508] 750 [1017]

BRAKE METHOD PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATIC

BRAKE TORQUE LBS-FT [NM] 125 [169] 125 [169] 300 [407] 345 [468] 345 [468] 800 [1085] 800 [1085]

PROGRAMMABLE RESOLUTION .001 DEG. .001 DEG. .001 DEG. .001 DEG. .001 DEG. .001 DEG. .001 DEG.

STD. TOTAL ANGULAR ACCURACY 60 SEC. 30 SEC. 30 SEC. 30 SEC. 30 SEC. 30 SEC. 20 SEC.

STD. REPEATABILITY 10 SEC. 10 SEC. 10 SEC. 10 SEC. 10 SEC. 10 SEC. 5 SEC.

OPT. (H OR I) ANGLR. ACCURACY +/-5 +/-5 +/-5 +/-3.6 +/-5 +/-3.6 +/-5 +/-3.6 +/-5 +/-3.6 +/-5 +/-3.6


UNIT WEIGHT LBS [KG] 107 [48] 142 [64] 203 [91] 251 [113] 345 [155] 400 [179] 696 [313]

SHIP WEIGHT LBS [KG] 157 [71] 196 [88] 253 [114] 301 [135] 395 [178] 450 [202] 831 [374]

Vertical Mount only (best choice for Vertical Spindle Machines)

Optional Features:• Chucks-(ManualorPneumatic)• Colletfixtures-(ManualorPneumatic)• Tailstocks-(ManualorPneumatic)• SingleAxisprogrammablecontrol• Clampingoutboardsupports(PneumaticorHydraulic)• BallLock™subplateandfixtureplate• Cables-forinterfacingtomachinetool• Compatiblewithallstandardservomotors• Oversizethruhole• Directmountfeedback (Heidenhain scale for accuracy up to +/- 2 arc seconds)

Standard Features:• 8sizes(6.5”-25”tablediameters)• Dualleadwormsetsimplifiesbacklashadjustment• C907bronzewormgearandhardenedandgroundworm running in a bath of oil• Highprecisionspindlebearings• Turcitebearingsurface• Internalpneumaticbrake (16.5“,20”and25”dualrack&pinion)• Precisiongroundsurfaces

DL-10-B-RHDL-12-B-RH

* Depends on type of servo motor *1 Vertical mount only. *2 Table is less the pneumatic brake.

EC D

B

G

A

F

H

ALTERNATE MOTOR ENCLOSURE LOCATION

2

troykeº DL Series - B Model


SPECIFICATIONSMODEL NC-30-C NC-42-C NC-60-CTURNTABLE DIAMETER [MM] 30.00 [762] 42.00 [1066] 60.00 [1524]

STANDARD THRU HOLE DIA [MM] 1.5000 [38] 3.000 [76] 3.000 [76]

OVERSIZE THRU HOLE DIA [MM] 10.250 [260] 14.000 [357] 20.000 [508]

MAXIMUM THRU HOLE DIA [MM] 16.000 [406] 18.000 [457] 30.000 [762]

HORIZONTAL LOAD CAPACITY [KG] 4,000 [1813] 7,000 [3173] 15,000 [6800]

VERTICAL LOAD CAPACITY [KG] 2,000 [906] 4,000 [1813] 7,000 [3173]

FACEPLATE T-SLOT WIDTH [MM] .68 [17.2] X 6 .81 [20.5] X 6 .81 [20.5] X 6

STANDARD TOTAL GEAR RATIO 360:1 360:1 720:1

ALTERNATE TOTAL GEAR RATIO 180:1 720:1 180:1 720:1 1440:1

MAX. SPEED RANGE (STD RATIO) 0-5 0-4 0-2

STD. CON. TORQUE LBS-FT [NM] 3,000 [4053] 4,500 [6079] 9,000 [12159]

BRAKE METHOD PNEUMATIC PNEUMATIC PNEUMATIC

BRAKE TORQUE LBS-FT [NM] 1111 [1506] 1550 [2102] 2950 [4000]

PROGRAMMABLE RESOLUTION .001 DEG. .001 DEG. .001 DEG.

STD. TOTAL ANGULAR ACCURACY 20 SEC. 40 SEC. 40 SEC.

STD. REPEATABILITY 5 SEC. 10 SEC. 10 SEC.

OPT. (H OR I) ANGLR. ACCURACY +/-5 +/-3.6 +/-5 +/-3.6 +/-5 +/-3.6

OPT. (H OR I) REPEATABILITY +/-2 +/-1 +/-2 +/-1 +/-2 +/-1

UNIT WEIGHT LBS [KG] 1,400 [630] 4,200 [1890] 5,500 [2475]

SHIP WEIGHT LBS [KG] 1,550 [697] 4,500 [2025] 5,800 [2610]

MODEL A B C D E F GNC-30-C 17.75 [450] 29.75 [755] 19.50 [495] 31.43 [798] 8.25 [209] 8.50 [215] 32.75 [831]

NC-42-C 27.00 [685] 43.00 [1092] 26.50 [673] 37.50 [952] 30.00 [762] 10.50 [266] 50.00 [1270]

NC-60-C 35.50 [901] 62.00 [1574] 31.00 [787] 31.75 [806] 30.50 [774] 10.50 [266] 65.50 [1663]

Horizontal Mount – Vertical Mount (42” - 84” requires Angle Bracket Option)

Standard features:• 3sizes(30”-60”tablediameters)• C907bronzewormgearandhardenedandgroundworm running in a bath of oil• Highprecisionspindlebearings• Turcitebearingsurface• Dualrack&pinionpneumaticbrake

• Precisiongroundsurfaces

Optional Features:• Chucks-(ManualorPneumatic)• Tailstocks-(ManualorPneumatic)• SingleAxisprogrammablecontrol• Clampingoutboardsupports(PneumaticorHydraulic)• BallLock™subplate• Cables-forinterfacingtomachinetool• Compatiblewithallstandardservomotors• Directmountfeedback(Heidenhainscaleforaccuracy

up to +/- 2 arc seconds)

NC-42-C -RH w/ AB-42

5

Angle Bracket Option

NC-42-C-RH w/AB-42

G

A

EC D

B

F

troykeº NC Series - C Model

SPECIFICATIONSMODEL NC-30-B NC-36-BTURNTABLE DIAMETER [MM] 30.00 [762] 36.00 [914]

STANDARD THRU HOLE DIA [MM] 1.5000 [38] 1.5000 [38]

OVERSIZE THRU HOLE DIA [MM] 10.250 [260] 10.250 [260]

MAXIMUM THRU HOLE DIA [MM] 16.000 [406] 16.000 [406]

HORIZONTAL LOAD CAPACITY [KG] 4,000 [1813] 4,000 [1813]

VERTICAL LOAD CAPACITY [KG] 2,000 [906] 2,000 [906]

FACEPLATE T-SLOT WIDTH [MM] .68 [17.2] X 6 .68 [17.2] X 6

STANDARD TOTAL GEAR RATIO 360:1 360:1

ALTERNATE TOTAL GEAR RATIO 180:1 720:1 180:1 720:1

MAX. SPEED RANGE (STD RATIO) 0-5 0-5

STD. CON. TORQUE LBS-FT [NM] 3,000 [4053] 3,000 [4053]

BRAKE METHOD PNEUMATIC PNEUMATIC

BRAKE TORQUE LBS-FT [NM] 1111 [1506] 1111 [1506]

PROGRAMMABLE RESOLUTION .001 DEG. .001 DEG.

STD. TOTAL ANGULAR ACCURACY 20 SEC. 20 SEC.

STD. REPEATABILITY 5 SEC. 5 SEC.

OPT. (H OR I) ANGLR. ACCURACY +/-5 +/-3.6 +/-5 +/-3.6

OPT. (H OR I) REPEATABILITY +/-2 +/-1 +/-2 +/-1

UNIT WEIGHT LBS [KG] 1,350 [607] 1,450 [652]

SHIP WEIGHT LBS [KG] 1,500 [675] 1,600 [720]

MODEL A B C D E F GNC-30-B 17.75 [450] 29.75 [755] 19.50 [495] 20.25 [514] 8.25 [209] 19.43 [493] 32.75 [831]NC-36-B 20.00 [508] 29.75 [755] 19.50 [495] 20.25 [514] 8.25 [209] 19.43 [493] 32.75 [831]

Vertical Mount – (42” - 84” are Horizontal Mount only) - see HBM Series

Standard Features:• 2sizes(30”-36”tablediameters)• C907bronzewormgearandhardenedandgroundworm running in a bath of oil• Highprecisionspindlebearings• Turcitebearingsurface• Dualrack&pinionpneumaticbrake• Precisiongroundsurfaces

Optional Features:• Chucks-(ManualorPneumatic)• Tailstocks-(ManualorPneumatic)• SingleAxisprogrammablecontrol• Clampingoutboardsupports(PneumaticorHydraulic)• BallLock™subplate• Cables-forinterfacingtomachinetool• Compatiblewithallstandardservomotors• Directmountfeedback (Heidenhain scale for accuracy up to +/- 2 arc seconds)

NC-30-B-RH

NC-30-B-RH

DC

B

G

A

E

F

4

Large Bore + Chuck Option

troykeº NC Series - B Model


MODEL A B C D E F G H J

HBM-20 20.00 SQ. 25.00 8.00 1.50 26.68 36.68 19.75 .56 4.000 (5)

HBM-30 30.00 SQ. 36.00 8.50 1.50 26.68 41.68 29.75 .68 5.000 (5)

HBM-42 42.00 SQ. 48.00 10.50 3.00 29.00 50.00 43.00 .81 6.000 (7)

HBM-60 60.00 SQ. 84.00 10.50 3.00 46.81 76.81 62.00 .81 8.000 (7)

HBM-75 75.00 SQ. 84.00 10.50 3.00 55.00 92.50 62.00 .81 8.000 (9)

HBM-75

Optional Features:• CustomtableT-slotpattern• BallLock™subplatesandfixtureplates• Cables-forinterfacingtomachinetool• Compatiblewithallstandardservomotors• Directmountfeedback(Heidenhainscaleforaccuracy up to +/- 2 arc seconds)

Square Tables primarily used on horizontal boring mill applications

Standard Features: • 5sizes(20”,30”,42”,48”,60”,75”squaretable)• Loadcapacity(20”-30”)4,000lbs.; (42”-48”)7,000lbs.;(60”-75”)15,000lbs.;• C907bronzewormgearandhardenedand ground worm running in a bath of oil• 20arc-secondsaccuracy• Highprecisionspindlebearings• Turcitebearingsurface• Dualrack&pinionpneumaticbrake• Precisiongroundsurfaces

JD

G

A

E

F

H

C

B

7

+ =

HBM-30 HDL-20 HBM and HDL Combination

troykeº HBM Series

Standard Features:• 3sizes(16.5”,20”,and25”tablediameters)• C907bronzewormgearandhardenedand ground worm running in a bath of oil• Highprecisionspindlebearings• Turcitebearingsurface• Dualrack&pinionpneumaticbrake• Precisiongroundsurfaces

SPECIFICATIONSMODEL HDL-16.5 HDL-20 HDL-25TURNTABLE DIAMETER [MM] 16.50 [419] 20.00 [508] 25.00 [635]

STANDARD THRU HOLE DIA [MM] 2.00 [50.8] 2.00 [50.8] 2.00 [50.8]

OVERSIZE THRU HOLE DIA [MM] 6.35 [161.2] 10.250 [260] 10.250 [260]

VERTICAL LOAD CAPACITY [KG] 1,000 [454] 2,000 [906] 2,000 [906]FACEPLATE T-SLOT WIDTH [MM] .68 [17.2] X 8 .68 [17.2] X 8 .68 [17.2] X 8STANDARD TOTAL GEAR RATIO 180:1 180:1 180:1

ALTERNATE TOTAL GEAR RATIO 360:1 360:1 360:1

MAX. SPEED RANGE (STD RATIO) 0-5 0-5 0-5

STD. CON. TORQUE LBS-FT [NM] 375 [508] 750 [1017] 750 [1017]

BRAKE METHOD PNEUMATIC PNEUMATIC PNEUMATIC

BRAKE TORQUE LBS-FT [NM] 800 [1085] 800 [1085] 800 [1085]

PROGRAMMABLE RESOLUTION .001 DEG. .001 DEG. .001 DEG.

STD. TOTAL ANGULAR ACCURACY 30 SEC. 20 SEC. 20 SEC.

STD. REPEATABILITY 10 SEC. 5 SEC. 5 SEC.

OPT. (H OR I) ANGLR. ACCURACY +/-5 +/-3.6 +/-5 +/-3.6 +/-5 +/-3.6

OPT. (H OR I) REPEATABILITY +/-2 +/-1 +/-2 +/-1 +/-2 +/-1

UNIT WEIGHT LBS [KG] 1,350 [607] 1,450 [652]

SHIP WEIGHT LBS [KG] 1,500 [675] 1,600 [720]

MODEL A B C D E F G H J K

HDL-16.5 10.00 [254] 17.25 [438] 11.00 [279] 10.50 [266] 12.25 [311] 11.75 [298] 3.31 [84] 26.06 [661] 28.82 [732] 19.68 [500]

HDL-20 11.00 [279] 19.75 [501] 11.00 [279] 10.50 [266] 12.25 [311] 11.75 [298] 3.31 [84] 27.06 [687] 28.82 [732] 19.68 [500]

HDL-25 13.50 [342] 22.50 [571] 13.50 [342] 13.00 [330] 12.25 [311] 11.75 [298] 3.31 [84] 29.56 [298 33.82 [860] 25.59 [650]

TOP VIEW

HDL-20G

K

Optional Features:• Chucks-(ManualorPneumatic)• Tailstocks-(ManualorPneumatic)• Singleaxisprogrammablecontrol• Clampingoutboardsupports(PneumaticorHydraulic)• Cables-forinterfacingtomachinetool• Compatiblewithallstandardservomotors• Directmountfeedback(Heidenhainscale for accuracy up to +/- 2 arc seconds)

Vertical Mount only – for use on horizontal spindle machining centers

J

F

E BC D

A

H

HDL-20

6

20” Diameter table centered on a 500mm pallet

troykeº HDL Series - 500MM Table on 500MM Pallet


MODEL A B C D E F G H J K LCTL-6.5-C 6.50 [165] 6.75 [171] 7.25 [184] 13.25 [336] 12.38 [314] 12.00 [304] 16.25 [412] 14.00 [355] 5.63 [143] 4.75 [120] 8.75 [222]

CTL-10-C 10.00 [254] 10.06 [256] 7.50 [191] 18.31 [465] 14.68 [373] 12.38 [314] 15.75 [400] 19.50 [495] 6.63 [168] 7.00 [177] 14.44 [367]

MODEL A B C D E F G H J K LCTL-6.5-B 6.50 [165] 6.75 [171] 7.25 [184] 13.25 [336] 12.38 [314] 15.25 [387] 16.25 [412] 8.81 [223] 5.63 [143] 4.75 [120] 8.75 [222]

CTL-10-B 10.00 [254] 10.06 [256] 7.50 [191] 18.31 [465] 14.68 [373] 17.75 [450] 15.75 [400] 9.43 [239] 6.63 [168] 7.00 [177] 14.44 [367]

MODEL A B C D E F G H J K LCTL-6.5-A 6.50 [165] 6.75 [171] 7.25 [184] 13.25 [336] 5.43 [137] 15.25 [387] 14.00 [355] 8.81 [223] 5.63 [143] 4.75 [120] 7.00 [177]CTL-10-A 10.00 [254] 10.06 [256] 7.50 [191] 18.31 [465] 8.18 [207] 17.75 [450] 18.68 [474] 11.68 [296] 6.63 [168] 7.00 [177] 10.25 [260]

CTL-10-C SERVO TILT/SERVO ROTARY

CTL-10-B MANUAL TILT/SERVO ROTARY

CTL-10-A MANUAL TILT/MANUAL ROTARY

XY

XY

XY

CJ H

K

G

FED

18MM

L

A

HJC

B

G

K

A

L

D18MM

E F

A

L

DE F

18MM

J

G

K

B

CH

9

SPECIFICATIONS - ROTARY AXISMODEL CTL-6.5-A CTL-6.5-B CTL-6.5-C CTL-10-A CTL-10-B CTL-10-CTURNTABLE DIAMETER [MM] 6.50 [165] 6.50 [165] 6.50 [165] 10.00 [254] 10.00 [254] 10.00 [254]

STANDARD THRU HOLE DIA [MM] 1.181 [30.0] 1.181 [30.0] 1.181 [30.0] 1.968 [50.0] 1.968 [50.0] 1.968 [50.0]

OVERSIZE THRU HOLE DIA [MM] N/A N/A N/A 3.000 [76.2] 3.000 [76.2] 3.000 [76.2]

MAXIMUM LOAD CAPACITY [KG] 75 [34] 75 [34] 75 [34] 150 [68] 150 [68] 150 [68]

FACEPLATE T-SLOT WIDTH [MM] .47 [12] X 4 .47 [12] X 4 .47 [12] X 4 .47 [12] X 4 .47 [12] X 4 .47 [12] X 4

STANDARD TOTAL GEAR RATIO 90:1 90:1 90:1 90:1 180:1 180:1

MAX. SPEED RANGE (STD RATIO) N/A 0-20 RPM 0-20 RPM N/A 0-10 RPM 0-10 RPM

CONTINUOUS TORQUE LBS-FT[NM] N/A 75 [101] 75 [101] N/A 300 [42] 300 [42]

BRAKE METHOD PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATIC

BRAKE TORQUE LBS-FT [NM] 125 [169] 125 [169] 125 [169] 300 [407] 300 [407] 300 [407]

PROGRAMMABLE RESOLUTION N/A .001 DEG. .001 DEG. N/A .001 DEG. .001 DEG.

STD. TOTAL ANGULAR ACCURACY +/-60 SEC. +/-60 SEC. +/-60 SEC. +/-30 SEC. +/-30 SEC. +/-30 SEC.

STD. REPEATABILITY +/-10 SEC. +/-10 SEC. +/-10 SEC. +/-10 SEC. +/-10 SEC. +/-10 SEC.

UNIT WEIGHT LBS [KG] 200 [91] 200 [91] 200 [91] 300 [136] 300 [136] 300 [136]

SHIP WEIGHT LBS [KG] 275 [125] 275 [125] 275 [125] 375 [170] 375 [170] 375 [170]

SPECIFICATIONS - TILT AXISMODEL CTL-6.5-A CTL-6.5-B CTL-6.5-C CTL-10-A CTL-10-B CTL-10-CSTANDARD TOTAL GEAR RATIO 180:1 180:1 180:1 180:1 180:1 180:1

MAX. SPEED RANGE (STD RATIO) N/A N/A 0-1 RPM N/A N/A 0-1 RPM

BRAKE METHOD MANUAL MANUAL PNEUMATIC MANUAL MANUAL *HYDRAULIC

BRAKE TORQUE @ 100 PSI LBS-FT [NM] 125 [169] 125 [169] 200 [270] 200 [270] 200 [270] 200 [270]

MAXIMUM TILT AXIS TRAVEL -5 / +100 DEG -5 / +100 DEG -5 / +100 DEG -5 / +110 DEG -5 / +110 DEG -5 / +110 DEG

CENTER HEIGHT @ 90 DEG POSITION 4.75 [120.7] 4.75 [120.7] 4.75 [120.7] 7.00 [177.8] 700 [177.8] 7.00 [177.8]

TURNTABLE HEIGHT @ 0 DEG POSITION 8.00 [203] 8.00 [203] 8.00 [203] 10.06 [256] 10.06 [256] 10.06 [256]

STD. TOTAL ANGULAR ACCURACY +/-60 SEC. +/-60 SEC. +/-60 SEC. +/-60 SEC. +/-60 SEC. +/-60 SEC.

STD. REPEATABILITY +/-10 SEC. +/-10 SEC. +/-10 SEC. +/-10 SEC. +/-10 SEC. +/-10 SEC.

* Requires AHU Option

Centerline Tilting – Heavy Duty

Standard Features:• 2sizes(6.5”and10”tablediameters)• Dualleadwormsetsimplifiesbacklashadjustment• C907bronzewormgearsandahardenedandgroundworms running in a bath of oil• Highprecisionspindlebearings• Turcitebearingsurface• Internalpneumaticbrake(RotaryAxis)• Precisiongroundsurfaces• Zeroreturn/homeswitches(BothAxis)• +/-overtravellimitswitches(TiltAxis)

Optional Features:• Oversizethruhole• Chucks-(ManualorPneumatic)• Colletfixtures-(ManualorPneumatic)• Tailstocks–(ManualorPneumatic)• Alternatehandwheellocation(TiltAxis)• SingleAxisprogrammablecontrol• Manual,pneumatic,orhydraulicbrake• Air-over-hydraulicunit(AHU)• BallLock™subplateandfixtureplate• Cables-forinterfacingtomachinetool• Compatiblewithallstandardservomotors• Directmountfeedback(Heidenhainscalefor accuracy up to +/- 2 arc seconds)

A MODEL – (MANUAL TILT / MANUAL ROTARY)

B MODEL – (MANUAL TILT / NC POWERED ROTARY)

C MODEL – (NC POWERED TILT / NC POWERED ROTARY)

8

troykeº CTL Series


MODEL A B C D E F G H J KL-6.5 5.88 [149] 6.38 [162] 5.25 [133] 9.50 [241] 6.43 [163] 10.25 [260] 13.87 [352] 13.50 [342] 11.56 [294] 4.50 [114]

L-10 7.50 [184] 7.00 [178] 7.25 [184] 10.25 [260] 7.25 [184] 10.25 [260] 15.25 [387] 14.87 [377] 14.25 [362] 4.00 [102]

SPECIFICATIONS - ROTARY AXISMODEL L-6.5 L-10TURNTABLE DIAMETER [MM] 6.5 [165] 10.0 [254]

STANDARD THRU HOLE DIA [MM] 1.181 [30.0] 1.968 [50.0]

OVERSIZE THRU HOLE DIA [MM] * *

MAXIMUM LOAD CAPACITY [KG] 100 [45] 300 [136]

FACEPLATE T-SLOT WIDTH [MM] .47 [12] X 4 .47 [12] X 4

STANDARD TOTAL GEAR RATIO 80:1 180:1

MAX. SPEED RANGE (STD RATIO) 0-10 RPM 0-10 RPM

CONTINUOUS TORQUE LBS-FT[NM] 94 [167] 375 [508]

BRAKE METHOD N/A PNEUMATIC

BRAKE TORQUE LBS-FT [NM] N/A 250 [338]

PROGRAMMABLE RESOLUTION .001 DEG. .001 DEG.

STD. TOTAL ANGULAR ACCURACY +/-60 SEC. +/-60 SEC.

STD. REPEATABILITY +/-20 SEC. +/-20 SEC.

UNIT WEIGHT LBS [KG] 400 [179] 550 [247]

SHIP WEIGHT LBS [KG] 475 [213] 625 [280]

SPECIFICATIONS - TILT AXISMODEL L-6.5 L-10STANDARD TOTAL GEAR RATIO 240:1 180:1

MAX. SPEED RANGE (STD RATIO) 0-2 RPM 0-2 RPM

BRAKE METHOD PNEUMATIC PNEUMATIC

BRAKE TORQUE @ 100 PSI LBS-FT [NM] 125 [169] 250 [338]

STD. TOTAL ANGULAR ACCURACY +/-60 SEC. +/-60 SEC.STD. REPEATABILITY +/- 30 SEC. +/-30 SEC.MAXIMUM TILT AXIS TRAVEL +100/ -20 DEG. +100/ -20 DEG.

Standard Features:• 2sizes:(6.5”and10”rotarytablediameters)• RotaryandTiltaxis• Dualleadwormsetsimplifiesbacklashadjustment• C907bronzewormgearsandahardenedandgroundworms running in a bath of oil• Highprecisionspindlebearings• Turcitebearingsurfaces• Internalpneumaticbrake(Rotary&Tilt)• Precisiongroundsurfaces• Zeroreturn/homeswitches(BothAxis)• +/-overtravellimitswitches(TiltAxis)

Optional Features:• Chucks–(ManualorPneumatic)• Colletfixtures-(ManualorPneumatic)• SingleAxisprogrammablecontrol• Compatiblewithallstandardservomotors• Cables-forinterfacingtomachinetool• ManualRotaryAxisand/orManualTiltAxis• BallLock™subplate

L-6.5

Rotary Axis Centered on Tilt Axis

L-10

X

Y

K

B

DE F

G

A

J C H

11

TDL-8-2 with Dual Rotary Axis Option

L-10-OS-10 with Outboard Support Option

troykeº L Series

MODEL A B C D E F G H JTDL-8-2 4.50 [114] 9.31 [236] 27.56 [700] 9.50 [241] 6.43 [163] 10.25 [260] 13.87 [352] 13.50 [342] 9.44 [240]TDL-10-2 6.00 [152] 10.87 [276] 35.38 [898] 10.25 [260] 7.25 [184] 10.25 [260] 15.25 [387] 14.87 [377] 11.50 [292]TDL-15-2 8.75 [222] 13.75 [349] 43.62 [1108] 14.87 [377] 10.00 [254] 13.00 [330] 18.50 [469] 14.87 [377] 15.75 [400]TDL-20-2 11.25 [285] 17.18 [334] 58.50 [1485] 21.00 [533] 13.06 [331] 16.81 [427] 23.87 [606] 16.25 [412] 21.00 [533]TDL-25-2 13.00 [330] 19.81 [503] 63.50 [1612] 21.00 [533] 13.06 [331] 16.81 [427] 26.12 [663] 16.25 [412] 26.00 [660]

SPECIFICATIONS - TILT AXISMODEL TDL-8-2 TDL-10-2 TDL-15-2 TDL-20-2 TDL-25-2STANDARD TOTAL GEAR RATIO 240:1 180:1 240:1 180:1 180:1MAX. SPEED RANGE (STD RATIO) 0-1 RPM 0-1 RPM 0-1 RPM 0-1 RPM 0-1 RPMBRAKE METHOD PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATIC PNEUMATICBRAKE TORQUE @ 100 PSI LBS-FT [NM] 125 [169] 250 [338] 250 [338] 800 [1081] 800 [1081][POS-] BRAKE TORQUE LBS-FT [NM] 125 [169] 125 [169] 125 [169] N/A N/A[HOS-] BRAKE TORQUE LBS-FT [NM] 200 [270] 200 [270] 330 [446] 330 [446] 330 [446][HOS-HT] BRAKE TORQUE LBS-FT [NM] N/A N/A N/A 1400 [1890] 1400 [1890]STD. TOTAL ANGULAR ACCURACY +/-2 MIN. +/-2 MIN. +/-2 MIN. +/-2 MIN. +/-2 MIN.STD. REPEATABILITY +/- 30 SEC. +/-30 SEC. +/-30 SEC. +/-30 SEC. +/-30 SEC.MAXIMUM TILT AXIS TRAVEL +100/ -20 DEG. +100/ -20 DEG. +100/ -20 DEG. +100/ -20 DEG. +100/ -20 DEG.

SPECIFICATIONS - ROTARY AXISMODEL TDL-8-2 TDL-10-2 TDL-15-2 TDL-20-2 TDL-25-2TURNTABLE DIAMETER [MM] 8.00 [203] 10.00 [254] 15.00 [381] 20.00 [508] 25.00 [635]STANDARD THRU HOLE DIA [MM] 1.0 [25.4] 1.968 [50.0] 1.968 [50.0] 2.000 [50.8] 2.000 [50.8]OVERSIZE THRU HOLE DIA [MM] * * * * *MAXIMUM LOAD CAPACITY [KG] 100 [45] 300 [136] 300 [136] 1000 [450] 1000 [450]FACEPLATE T-SLOT WIDTH [MM] .47 [12] X 4 .47 [12] X 4 .63 [16] X 8 .56 [14.2] X 8 .56 [14.2] X 8STANDARD TOTAL GEAR RATIO 180:1 180:1 360:1 240:1 240:1MAX. SPEED RANGE (STD RATIO) 0-10 RPM 0-10 RPM 0-5 RPM 0-7 RPM 0-7 RPMCONTINUOUS TORQUE LBS-FT[NM] 187 [254] 375 [508] 750 [1017] 500 [677] 500 [677]BRAKE METHOD PNEUMATIC PNEUMATIC PNEUMATIC HYDRAULIC HYDRAULICBRAKE TORQUE LBS-FT [NM] 125 [169] 250 [338] 250 [338] 500 [677] 500 [677]PROGRAMMABLE RESOLUTION .001 DEG. .001 DEG. .001 DEG. .001 DEG. .001 DEG.STD. TOTAL ANGULAR ACCURACY +/-60 SEC. +/-60 SEC. +/-30 SEC. +/-30 SEC. +/-30 SEC.STD. REPEATABILITY +/-20 SEC. +/-20 SEC. +/-10 SEC. +/-10 SEC. +/-10 SEC.UNIT WEIGHT LBS [KG] 525 [235] 650 [291] 1100 [493] 2200 [986] 2400 [1076]SHIP WEIGHT LBS [KG] 625 [280] 750 [336] 1250 [560] 2400 [1076] 2600 [1166]

Rotary Axis Centered on Tilt Axis (Heavy Duty)

Standard Features:• 5sizesof“x”:(8”,10”,15”,20”,and25”tablediameters)• RotaryandTiltaxis• Dualleadwormsetsimplifiesbacklashadjustment• C907bronzewormgearsandahardenedand ground worms running in a bath of oil• Highprecisionspindlebearings• Turcitebearingsurfaces• Internalpneumaticbrake(Rotary&Tilt)• Precisiongroundsurfaces• Zeroreturn/homeswitches(BothAxis)• +/-overtravellimitswitches(TiltAxis)

Optional Features:• Chucks–(ManualorPneumatic)• Colletfixtures-(ManualorPneumatic)• Singleaxisprogrammablecontrol• Cables-forinterfacingtomachinetool• Manualrotaryaxisand/ormanualtiltaxis• Airoverhydraulicunit(AHU)• Clampingoutboardsupport(PneumaticorHydraulic)• BallLock™subplate• Compatiblewithall

standard servo motors

TDL-“X”-1 1 ROTARY AXIS

TDL-“X”-2 2 ROTARY AXIS

TDL-10-2

TDL-10-1

X

Y

A

DE F

J

G

B

C H

10

* For Single Rotary Axis Reduce dimension C by J

troykeº TDL Series - Single or Dual Rotary Axis


MODEL A B C D E F G HTS-6.5 5188 [130.0] 4.50 [114] 6.31 [160] 5.12 [130] 6.50 [165] 7.38 [187] 11.63 [295] 1.25 [31]TS-9 6.375 [161.9] 5.00 [127] 7.50 [191] 6.50 [165] 6.50 [165] 8.63 [219] 13.12 [333] 1.25 [31]TS-10 7.000 [177.8] 5.00 [127] 7.50 [191] 6.50 [165] 6.50 [165] 9.25 [235] 13.12 [333] 1.25 [31]

TS-12 8.500 [215.9] 5.00 [127] 7.50 [191] 6.50 [165] 6.50 [165] 10.75 [273] 13.12 [333] 1.25 [31]

TS-15 10.000 [254.0] 5.00 [127] 7.50 [127] 6.50 [165] 6.50 [165] 13.25 [337] 13.12 [333] 1.25 [31]

TS-16.5 10.000 [254.0] 7.50 [190] 13.50 [343] 11.75 [298] 7.50 [191] 12.25 [311] 15.75 [400.] 4.50 [114]

TS-20 13.000 [330.0] 7.50 [191] 13.50 [343] 11.75 [298] 8.25 [210] 15.25 [387] 15.75 [400] 4.50 [114]

TS-25 15.750 [400.0] 7.50 [191] 13.50 [343] 11.75 [298] 8.25 [210] 18.00 [457] 15.75 [400] 4.50 [114]

Standard Features:• Removabledeadcenter• #3morsetaperonmodelsTS-5c,6.5,9,10,12and15• #5morsetaperonmodelsTS-16.5,20and25• Lefthandorrighthandlockinghandleposition• 4way-2positionpneumaticvalve(pts-modelonly)• Spindleoilersonallmodels• Matchedcenterheighttomatingtable

Optional Outboard Supports:•HOS-Series (hydraulicbrakingoutboardsupport)•POS-Series (pneumaticbrakingoutboardsupport)•OS-Series (plainbearingoutboardsupport)•FR-Series (freerotatingrotarytable)

•AHU (airoverhydraulicunitforhos-series)

* for additional information consult factory.

MODEL A B C D E F G H

PTS-T5C 4.75 [120] 3.00 [76] 7.00 [177] 5.75 [146] 3.75 [95] 6.75 [171] 11.75 [298] 2.75 [69]PTS-6.5 5188 [130.0] 4.50 [114] 6.31 [160] 5.12 [130] 6.50 [165] 9.56 [243] 11.81 [300] 1.25 [31]PTS-9 6.375 [161.9] 5.00 [127] 7.50 [191] 6.50 [165] 6.50 [165] 10.75 [273] 13.25 [337] 1.25 [31]

PTS-10 7.000 [177.8] 5.00 [127] 7.50 [191] 6.50 [165] 6.50 [165] 11.75 [298] 13.25 [337] 1.25 [31]

PTS-12 8.500 [215.9] 5.00 [127] 7.50 [191] 6.50 [165] 6.50 [165] 12.88 [327] 13.25 [337] 1.25 [31]

PTS-15 10.000 [254.0] 5.00 [127] 7.50 [191] 6.50 [165] 6.50 [165] 14.38 [365] 13.25 [337] 1.25 [31]

PTS-16.5 10.000 [254.0] 7.50 [191] 13.50 [343] 11.75 [298] 7.50 [191] 11.38 [289] 16.50 [419] 4.50 [114]

PTS-20 13.000 [330.0] 7.50 [191] 13.50 [343] 11.75 [298] 8.25 [210] 15.87 [405 16.50 [419] 4.50 [114]

PTS-25 15.750 [400.0] 7.50 [191] 13.50 [343] 11.75 [298] 8.25 [210] 18.63 [473] 16.50 [419] 4.50 [114]

A

D

E

F

G

BC

H - STROKE

18MM

TS-10

G H - STROKE

F

DC

A

BE

18MM

PTS-10

13

troykeº TS & PTS Series — TailstockDual Tilting Table (Primarily used for machining and porting cylinder heads)

Standard Features:• 360degrees“A”axistravel&25degrees“B”axistravel• Dualleadwormsetallowsforsimplebacklashadjustment• C907bronzewormwheelandahardenedand ground worm shaftrunning in a bath of oil• Highprecisionspindlebearings• Turcitebearingsurfaces• Internalpneumaticbrakes• Precisiongroundsurfaces• Zeroreturn/homeswitches(bothaxis)• +/-Overtravellimitswitches(tiltaxis)• MScablereceptacles

Optional Features:• Colletfixtures–(manualorpneumatic)• Singleaxisprogrammablecontrol• Cables–forinterfacingtomachinetool• Manualrotaryaxisand/ormanualtiltaxis• Balllocksubplate• Compatiblewithallstandardservomotors

SUB PLATE

25.00+\-.0100

13.12

19.63

1.25

“X” Axis

14.38

14.3813.50TRAVEL

TRAVEL “Y” Axis

12

troykeº TT Series


Standard Features:• Availableinsingleordualaxisconfigurations• ACbrushlessservomotors(21in/lbsto230in/lbs)• Operatorstationwithlcddisplayandkeypad• Multipleinterfaceoptionstoahostcncsystem• Absoluteandincrementalprogrammodes• Rapidtraverseandfeedratemodes• MDImodecapability(manualdatainput)• Emergencystopandcyclestartpushbuttons• ACbrushlessmotorwithresolverfeedback• Optionalpositionfeedbackviascale• RS-232interfacetohostcnc(upload,download&dnc)• Digitali/ofor“m-code”interfacetocnc• Backlashcompensation(parametersetting)• Optionalremotehandwheelfortablejogging• Controlboxenclosuresize: length12”[304]xwidth14”[356]xheight21”[533]

SC-60 SINGLE AXIS CONTROLLER

Sieb & Meyer single or dual axis

control

Standard Features:• Simplemenudrivencommandsandsoftkeys• LCDDisplay(position,program,parameters)• Linerepeat,linejumpandsub-programcallcommands• Absoluteandincrementalprogrammodes• Rapidtraverseandfeedratemodes• MDImodecapability(manualdatainput)• Twokeypadsforprogramandparameterentryandediting• Emergencystopandcyclestartpushbuttons• RS-232communicationsport(upload,download&dnc)• M-functioninterfacecapability(cableincluded)seeprint• Backlashcompensation(parametersetting)• Batterybackedmemory(298linesofprogramspace) (999 lines of program space / 10 programs - sc-60)• Controlboxenclosuresize: length4.38”[111]xwidth11.81”[300]xheight13”[330]sc-60• Forotheravailablecontrolsconsultfactory

• MODELSC-55CONTROL(T5C-2, T16C, DL-10, DL-12, OR DL-15)• MODELSC-60CONTROL (T5C-3, T5C-4, T16C, DL-16.5, DL-20, OR DL-25)

• MODEL408-21in/lbCONTINUOUSTORQUECONTROL• MODEL506-48in/lbCONTINUOUSTORQUECONTROL• MODEL904-230in/lbCONTINUOUSTORQUECONTROL

15

troykeº Servo Controls

A B

D

E

MODEL A B C D E FCK-6 6.00 [152] 1.520 [38] 2.35 [59] .10 [2] 2.53 [64] 1.40 [35]

CK-8 8.25 [209] 2.257 [57] 3.12 [79] .17 [4] 3.56 [90] 1.87 [47]

CK-10 10.00 [254] 2.810 [71] 3.50 [88] .16 [4] 3.75 [95] 2.37 [60]

CK-12 12.00 [304] 3.257 [82] 4.00 [101] .16 [4] 4.37 [111] 2.37 [60]

CK-15 15.00 [381] 4.250 [107] 5.78 [146] .28 [7] 5.54 [140] 3.27 [83]

CK-18 18.00 [457] 5.025 [127] 5.78 [146] .28 [7] 5.54 [140] 3.27 [83]

CK-21 21.00 [533] 7.025 [178] 6.25 [158] .28 [7] 5.54 [140] 3.27 [83]

CK-24 24.00 [609] 7.025 [178] 6.53 [165] .25 [6] 5.54 [140] 3.27 [83]

Contact Troyke for complete line of Fixturing and Workholding Options

MANUAL 3 JAW CHUCKS

(4 AND 6 JAW CHUCKS AVAILABLE)

MANUALANDPNEUMATICCOLLETFIXTURES

P5C-5

3.5 [8.8]

C F

2.5 [6.3] 5.0 [12.5] 5.0 [12.5] 3.38 [85]

4.63 [117]

4.0 [101]

6.25 [158]

.5 [12]

5.0 [125]

M3J-5 OR M16C-5 P5C-5

14

troykeº Workholding


THANK YOU FOR CHOOSING TROYKE FOR YOUR MACHINE TOOL ACCESSORY NEEDS !

EXAMPLE: DL-10-B-RH-PC-S-180

TAILSTOCKS CHUCKS

SERIES TURNTABLEDIAMETER

SERIES MATCHINGTABLE DIAMETER

- 6.5- 8- 9- 10- 12- 15-16.5- 20- 25- 30- 36- 42- 48- 60- 75- 84

- A- B- C

- RH- LH

- PC -PULSECODER - (ENCODER ON THE MOTOR)- R-RESOLVER- H-HEIDENHAIN ENCODER - (DIRECT MOUNT) HA = ROD-250 (+/-5 ARC SECONDS) HB = RON-255 (+/-5 ARC SECONDS) HC = ROD-271 (+/-5 ARC SECONDS) HD = RON-275 (+/-5 ARC SECONDS) HE = ROD-800 (+/-1 ARC SECOND) HF = RON-806 (+/-1 ARC SECOND) HG = RON-287 (+/-2.5 ARC SECONDS)- I -INDUCTOSYN SCALE - (DIRECT MOUNT)IA=7”360POLE(+/-5ARCSECONDS)IB=7”720POLE(+/-5ARCSECONDS)

- 60:1- 90:1- 120:1- 180:1- 240:1- 270:1- 360:1- 540:1- 720:1-1440:1

- TS - TTS- PTTS- PTS- OS- POS- HOS- HOS-HT

- CTL - 6.5- CTL-10- 6.5- 9- 10- 12-15-16.5- 20- 25

- M- P- CK- PCK

- 6- 8- 10- 12- 15- 18- 21- 24

- 5C-5- 16C-5- 3J-5

MOTORMOUNT

POSITIONFEEDBACK

TOTAL GEARREDUCTION

- 30- 36- 42- 48- 60- 75- 84

NC-TABLESDL-TABLES

CONTROLS

- 55

CABLES

- CA-10- CA-15- CAT-10- CAT-15

ANGLEBRACKET

- AB-42- AB-48- AB-60

FIXTURE PLATES

- FP-8-S- FP-10-S- FP-12-S

- SP-8- SP-10- SP-12

SUBPLATES

- FP-8- FP-10- FP-12

AIR OVER HYDRAULICS

- AHU

- S-STANDARD DIA.- O-OVERSIZE DIA.- M-MAXIMUM

CENTERHOLEMODEL

- DL- NC- HBM - HDL- L- TDL- CTL- CF - TT

MODELSERIES MODELSERIES

- SC

FIXTURE PLATES

MODEL MODEL MODEL MODEL MODEL

17

Call to discuss custom specific applications.

troykeº How to Order — Rotary Tables

No. INSPECTION ITEM TOLERANCE

1 TABLE FACE FLATNESS (CONCAVE) .0005 [.013]

2 TABLE FACE PARALLELISM .0005 [.013]

3 TABLE FACE RUNOUT THRU 360 DEGREES OF ROTATION .0005 [.013]

4 TABLE FACE PERPENDICULARITY TO FOOT OF BASE PER 12.0 [304] .0010 [.025]

5 TABLE FACE PERPENDICULARITY TO TENNON SLOT IN FOOT OF BASE PER 12.0 [304] .0010 [.025]

6 CENTER HOLE RUNOUT +/- .0005 [.013]

7 CENTER HEIGHT DIFFERENCE OF TURNTABLE AND TAILSTOCK PER 12.0 [304] +/-.0010 [.025]

Geometric Accuracy:

NOTE: ALL DIMENSIONS IN [ ....... ] ARE METRIC UNITS

TroykeproductsillustratedanddescribedhereinareprotectedbyU.S.andforeignpatents,patentspendingandappliedfor. Illustrationsandspecificationshereinarenotbindingindetail;wereservetherighttomakechangesandimprovements, incorporating them as conditions warrant.

Angular accuracy of each rotary table is checked with an auto-collimator

* all angular accuracies stated in this catalog are total through 360 degrees rotation of the turntable. (not plus or minus)

Critical Alignments:Alignmentsoftailstocksandoutboardsupportstothe rotary table is critical. Alignments must be within a maximum0.002”tir.Iftherunoutofthepartisgreater,orifthetailstockoroutboardsupportisnotcenteredtotherotarytableaxis,youareineffectbendingthepart.Thisrequiressubstantialtorqueandcausesaccuracyproblems and accelerates wear on the rotary table.

Accuracy:Accuracy is measured in an unloaded condition. The followingexamplesmayaffectthestatedaccuracyofthetable.(User’sfixtures,sizeandweightofpart,off-centerparts,outboardsupports,tailstockpressures,off-centerdrillingormilling,fixturemountingsurfaces,outofalignment(tir)tailstocksorsupports,etc.)

16

1 2 3 4 5 6 7

troykeº Angular Accuracy:

20 SECONDS = .00029 [.007] ON A 6.00 [152] DIAMETER30 SECONDS = .00044 [.011] ON A 6.00 [152] DIAMETER45 SECONDS = .00066 [.016] ON A 6.00 [152] DIAMETER60 SECONDS = .00087 [.022] ON A 6.00 [152] DIAMETER

Troyke.com | 513.769.4242 11294 Orchard St., Cincinnati, Ohio 45241

troykeº Single and Dual Axis RotaryColletIndexersAvailable

troykeº Direct Drive Rotary Tables Available

Ask for Catalog 88-04

Ask for the Direct Drive Rotary Tables Catalog

CATAlog 99-05 - Rotary Milling Machine, Rotary - · PDF fileA work of art... and function. Our...

Documents

Transcript of CATAlog 99-05 - Rotary Milling Machine, Rotary - · PDF fileA work of art... and function. Our...