CAT TH336C.pdf
-
Upload
lesantiago -
Category
Documents
-
view
215 -
download
1
Transcript of CAT TH336C.pdf
-
CatTH336CTelehandler
Specifi cationsEngineModel
Standard Cat C3.4B Stage IIIBOption 1 Cat C4.4 ACERT Stage IIIBOption 2 Cat C4.4 ACERT Stage IIIB
Gross PowerStandard 75 kW/101 hpOption 1 92.6 kW/124 hpOption 2 106 kW/142 hp
Maximum TorqueStandard 420 Nm/1,400 rpm Option 1 530 Nm/1,400 rpmOption 2 560 Nm/1,400 rpm
Standard Options 1 and 2Bore 99 mm 105 mmStroke 110 mm 127 mmDisplacement 3.4 L 4.4 L All engine horsepower (hp) are metric.
WeightsOperating Weight with Carriage & Forks 7630 kg
Operating Specifi cationsRated Load Capacity 3300 kgMaximum Lift Height 6100 mmMaximum Forward Reach 3109 mmTop Travel Speed 40 km/hLoad at Maximum Height 2400 kgLoad at Maximum Reach 1000 kgOutside Turning Radius Over Tires 3700 mmOutside Turning Radius Over Forks 4670 mm
Service Refi ll CapacitiesFuel Tank 150 LHydraulic Tank 90 L
TiresStandard 15.5/80-24 16PR
BrakesService Brakes Servo Assisted on Front AxleParking Brakes Mechanical on Front Axle
Hydraulic SystemMaximum System Pressure 250 barMaximum Pump Flow 150 L/minPump Type Variable Displacement
Load Sensing Axial Piston Pump
Auxiliary Hydraulic SupplyIntermittent 80 L/minContinuous 60 L/min
Transmission Speeds C3.4B All EngineForward Engine Only Options
1 7 km/h 6.7 km/h2 13.7 km/h 10 km/h3 20.4 km/h 12.9 km/h4 30 km/h 19.4 km/h5 29.7 km/h6 40 km/h
Reverse1 7 km/h 6.7 km/h2 13.7 km/h 12.9 km/h3 30 km/h 29.7 km/h
Boom PerformanceBoom Up 5.1 SecondsBoom Down 4.9 SecondsTele In 4.4 SecondsTele Out 4.6 SecondsCrowd Forward (dump) 3.1 SecondsCrowd Backward 2.5 SecondsCombined
Up and Out 10.0 SecondsDown and In 7.0 Seconds
Drawbar PullStandard 78 kNOption 1 85 kNOption 2 93 kN
Bucket Breakout Force to ISO 8313 55 kNBoom Breakout Force 36 kN
-
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com
2013 CaterpillarAll rights reserved.
CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the Power Edge trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
0 m
1 m
2 m
3 m
4 m
5 m
6 m
0 m2 m3 m4 m
B
10
20
30
40
50
67.5
0
A
B
C
1300
kg
1000
kg 1
500
kg18
00 k
g
2400 kg
3300 kg
3000 kg
1 m
500 mm
TH336C Telehandler
Dimensions
All dimensions are approximate.
Load Chart and Dimensions
409 mm
662 mm
4850 mm
4278 mm
2975 mm
1753 mm
2339 mm*
920 mm agricultural880 mm non agricultural
1988 mm
2382 mm
AEHQ6731-03 (07-2013)Replaces AEHQ6731-02
* Top guard adds 98 mm to machine heightAir conditioning adds 50 mm to machine heightHeight beacon without air conditioning adds 184 mm to machine heightHeight beacon with air conditioning adds 227 mm to machine height
IMPORTANTRated lift capacities shown are with machine equipped with carriage and pallet forks. The machine must be level on a fi rm surface with undamaged, properly infl ated tires. Machine specifi cations and stability are based on rated lift capacities at specifi c boom angles and boom lengths. (If specifi cations are critical, the proposed application should be discussed with your dealer.)
DO NOT exceed rated lift capacity loads, as unstable and dangerous machine conditions will result.
DO NOT tip the machine forward to determinethe allowable load.
Due to continuous product improvements, machine specifi cations and/or equipment changes may be made without prior notifi cation.
Cat TH336C TelehandlerSpecificationsEngineWeightsOperating SpecificationsService Refill CapacitiesTiresBrakesHydraulic SystemTransmission SpeedsBoom PerformanceDimensionsLoad Chart and Dimensions