Cat HY14-2550 Electrohydraulics Parker

Electrohydraulic Motion Controls

Catalog HY14-2550/US

Proportional Directional & Pressure Control Valves Servovalves, Electronics, Accessories

May 2014

Return to ALPHA TOC

Return to SECTION

TOC

Electrohydraulic Motion Control ProductsCatalog HY14-2550/US

Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USA

Cat HY14-2550-frtcvr.indd, ddp

Return to ALPHA TOC

Return to SECTION

TOC

II

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation

by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance,

maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.

To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.

WARNING USER RESPONSIBILITY

The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the detailed Offer of Sale elsewhere in this document or available at www.parker.com/hydraulicvalve.

Copyright 2014 Parker Hannifin Corporation, All Rights Reserved

OFFER OF SALE

For safety information, see Safety Guide SG HY14-1000 at www.parker.com/safety or call 1-800-CParker.SAFETY GUIDE


intro.indd, ddp

III Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USA

Return to ALPHA TOC

Return to SECTION

TOC

Contents

Wherever in the world machinery is designed, manufactured or used, Parker is there to meet your hydraulic application requirements with a broad selection of hydraulic com ponents, worldwide availability and technical support, and above all Parker Premier Customer Service.Arranged by product group, this catalog

contains specifications, technical data, reference materials, dimen sions, and ordering information on the complete line.When you are ready to order, call your local Parker Hydraulic distributor for fast delivery and service. Consult your Parker Hydraulic Sales Office for the location of the distributor serving your area (see listing at the back of this catalog).

Proportional Directional Control Valves

Proportional Pressure Control Valves

Servovalves

Electronics

Accessories

A

B

C

D

E

IV Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USA

Notes

intro.indd, ddp

Catalog HY14-2550/USReturn to

ALPHA TOC

Return to SECTION

TOC


intro.indd, ddp

V Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USA

Return to ALPHA TOC

Return to SECTION

TOCProportional Pressure Control Valves (cont.) Series Page VBY*K06, VBY*K10 .........................................B51 - B56 VMY*K06, VMY*K10 ........................................B57 - B63Servovalves BD15, BD30 .......................................................C2 - C11 DY01 ................................................................C23 - C26 DY1S ................................................................C16 - C18 DY3H, DY6H .....................................................C19 - C22 DY05 ................................................................C27 - C30 DY10 ................................................................C31 - C34 DY12 ................................................................C35 - C38 DY15 ................................................................C39 - C42 DY25 ................................................................C43 - C46 DY45 ................................................................C47 - C50 PH76 ................................................................C12 - C15 SE2E ................................................................C71 - C75 SE2N ................................................................C62 - C65 SE05, SE10, SE15 ...........................................C55 - C61 SE20 ................................................................C66 - C70 SE31 ................................................................C76 - C80 SE60 ................................................................C81 - C84 SEMT ...............................................................C51 - C54Electronics BD90 ................................................................D19 - D20 BD101 ..............................................................D21 - D22 C3F ..................................................................D31 - D49 ED00104 ..........................................................D11 - D12 ET00104, ET99104 ..........................................D17 - D18 EW10104, EW16104, EW25104, EW26104, EW32104 ..........................................D9 - D10 EX00-S05 ............................................................... D52 K Card Holder ........................................................ D52 KH32F .................................................................... D52 PCD00A-400 ....................................................D13 - D16 PID00A-40* ......................................................D23 - D26 PSD24 ..............................................................D50 - D51 PWD00A-400 .....................................................D2 - D4 PWDXXA-40* .....................................................D5 - D8 PZD00A-40* .....................................................D27 - D30Accessories Bolt Kits .................................................................. E4 Cable Assemblies................................................... E2 Connectors ............................................................. E3 Subplates ............................................................... E4 Wire Color Assignments ......................................... E4Terms of Sale and Warranty Limitations .............. E5Safety Guide ........................................................E6 - E7

Alphabetical Index

Proportional Directional Control Valves Series Page D1FB ................................................................A11 - A20 D1FB*U, D3FB*U .............................................A49 - A61 D1FH, D3FH ..................................................A109 - A115 D1FL, D3FL ......................................................A68 - A74 D1FM, D3FM ..................................................A109 - A115 D1FP ..............................................................A137 - A142 D1FW, D3FW .....................................................A2 - A5 D1FW*ET ...........................................................A6 - A9 D1FX, D3FX .....................................................A94 - A99 D1TX ..............................................................A100 - A103 D3FB ................................................................A21 - A30 D3FP ..............................................................A143 - A148 D30FP ............................................................A149 - A154 D31FB, D41FB, D91FB, D111FB .....................A32 - A48 D31FC, D41FC, D91FC, D111FC ....................A81 - A93 D31FB*EE, D41FB*EE, D91FB*EE, D111FB*EE ..................................A62 - A67 D31FE, D41FE, D91FE, D111FE ..................A124 - A136 D31FH, D41FH, D81FH, D91FH, D111FH ....A116 - A123 D31FP, D41FP, D91FP, D111FP ....................A155 - A164 D31FS, D41FS, D81FS, D91.FS, D111FS ....A104 - A108 D39FF, D49FF, D99FF, D119FF .......................A75 - A80 D41FL, D91FL ..................................................A68 - A74 D* Mounting Interface ....................................A166 - A168 D* Wiring ................................................................ A165Proportional Pressure Control Valves 4VP01 ................................................................B6 - B9 D1FV, D1FV OBE .............................................B64 - B71 DUR*L06 ..........................................................B92 - B95 F5C06, F5C08, F5C10 .....................................B96 - B99 LCM2, LCM3 .......................................................... B110 PRPM2, PRPM3 ..............................................B87 - B91 R4R03, R4R06, R4R10 ..............Subplate .......B73 - B77 R4R03, R4R06, R4R10 .............. In-line ..........B78 - B82 R4V03, R4V06, R4V10 .............. In-line ...........B38 - B42 R4V03, R4V06, R4V10 ..............Subplate .......B17 - B25 R4V03, R4V06, R4V10 OBE ......Subplate .......B27 - B37 R5A06, R5A08, R5A10 ..................................B100 - B101 R5P06, R5P08, R5P10 ..................................B103 - B109 R5R06, R5R08, R5R10 ....................................B83 - B86 R5V06, R5V08, R5V10, R5V12 .......................B43 - B49 R6V03, R6V06, R6V10 ..............Subplate .......B17 - B25 R6V03, R6V06, R6V10 OBE ......Subplate .......B27 - B37 RE06M*T ..........................................................B10 - B15 RE06M*W ..........................................................B2 - B5 RPDM2 ................................................................... B50 SPC01, SPC02, SPC03, SPC06 ....................B111 - B115

VI Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USA

Notes

intro.indd, ddp

Catalog HY14-2550/USReturn to

ALPHA TOC

Return to SECTION

TOC

Return to ALPHA TOC

Proportional Directional Control ValvesCatalog HY14-2550/US

D_FW.indd, ddp

A1 Parker Hannifin CorporationHydraulic Valve DivisionElyria, Ohio, USA

Series D*FW

A

Return to SECTION

TOC

Return to ALPHA TOC

Contents

PHASE OUT

Direct Pilot Spool Integrated Series Description Operated Operated Feedback Electronics Page [ size: NG ] 6 10 10 16 25 32 [ size: ISO/CETOP ] 3 5 5 7 8 10 D*FW Std.Performance A2

D1FW*ET Std.Exp.Proof A6

D1FB Std.Performance A11 D1FBOBE A11

D3FB Std.Performance A21 D3FBOBE A21

D*1FB Std.Performance A32 D*1FBOBE A32

D*FBOBE CANopen A49

D*1FB*EE Std.Performance A62

D**FL Std.Performance A68 w/motion controlD*9FF Std.Performance A75

D*1FC MediumPerformance A81

D*FX HighPerformance A94

D1TX HighPerformance A100

D*1FS HighPerformance A104

D*FH ServoPerformance A109

D*FM ServoPerformance A109 w/dual gainD*1FH HighPerformance A116 (See D*1FC)D*1FE HighPerformance A124

D1FP ServoPerformance A137



D*1FP ServoPerformance A155

Wiring Guidelines for RFI / EMC Immunity A165 Mounting Interface Dimensions A166


D_FW.indd, ddp


Series D*FW

A

Return to SECTION

TOC

Return to ALPHA TOC

General Description

Series D*FW direct operated proportional directional control solenoid valves are available in sizes NG6 (CETOP 3) and NG10 (CETOP 5).

Typical applications include reproducible control of ac-tuator speed in rapid/slow speed profiling, and smooth acceleration and deceleration performance.

Features Standard DIN/ISO/CETOP/NFPA interfaces. Progressive flow characteristics for improved low flow

resolution.

Spring centered spool. Wide selection of spool options and flow capacity.

Technical Information

SpecificationsInterface DIN NG6 (CETOP 3) NG10 (CETOP 5)Flow Rating @10 Bar (150 PSI) p (PA, BT) (spooloptionsupto) LPM(GPM) 20 (5.3) 60 (15.9)

Maximum Flow (refertooperatinglimitcurves) LPM(GPM) 48 (12.5) 170 (45)Step Response (timetoreach90%ofa100%stepcommand) ms 100 165Hysteresis %


D_FW.indd, ddp


Series D*FW

A

Return to SECTION

TOC

Return to ALPHA TOC

Code Description 1 NG6/CETOP 3 3 NG10/CETOP 5

Driver CardsRefer to the Electronics section for driver cards and support electronics.Mounting InterfaceRefer to Mounting Interface Dimensions in the Proportional Directional Valve section of this catalog.AccessoriesRefer to the Accessories section for bolt kits, subplates and connectors.

Ordering Information

Weight:D1FW 2.5 kg (5.5 lbs.) D3FW 6.8 kg (15.0 lbs.)

Design SeriesNOTE:

Not required when ordering.

DDirectional

Control Valve

Size

Code Description 0 Standard(1)

(1) Metal can coils

Spool Type

Flow Control

F

Code Description F(3) Free Coil Lead Wires W(5) Socket Connector DIN43650withoutPlug

(3)D1FW,9Vovermoldedcoilonly. (4)Contactfactoryforcustomlead wire and connector options in OEM quantities. (5)Notavailable9Vcoil.

Valve Accessories

Style Solenoid Accessories

Flow

Code Style

C

E

K

A B

P T

A B

P TA B

P T

Open Loop

W

Code Description N Nitrile V Fluorocarbon

Seal

Code Description J(2) 24VDC K 12 VDC M(2) 9VDC(2) Not for D3FW

Solenoid Voltage

0

Flow at p 5 Bar (72.5 PSI) Code per metering edge D1FW D3FW LPM (GPM) LPM (GPM) C 7.5 (2.0)* F 15(4.0) H 20 (5.3)# 20 (5.3)* K** 30 (7.8) M 40(10.6) S 60(15.9)#

Refer to factory for ratio spool options.* E09spoolsonlyavailable where indicated.** E01 spool only. Type E spool only.# Not available with E81, E82.

Spool Type

)) ( (

)) ((

Code Spool Overlap

10% 20%

B31 E01 E81*

B32 E02 E82*

E09

1) Reduced Flow Rate on Port B, Nominal Flow Rate on Port A Code A* for spool QB>QA optional Refer to factory for ratio spool options. * Use E01 or E02 for new applications.

QA>QB1) QA=QB10%

)) ( (

Spool Type

Bolt Kits:D1FW BK209 (4)10-24x1.25SHCSD3FW BK98 (4)1/4-20x1.62SHCS


D_FW.indd, ddp


Series D*FW

A

Return to SECTION

TOC

Return to ALPHA TOC

Electrical Specifications

Series D*FWwithout integrated electronics Interface DIN NG6 (CETOP 3) NG10 (CETOP 5) Solenoid Order Code J K M K J Nominal Resistance ohms 24 6 3.3 4 16 Nominal Current amps 0.9 1.8 2.5 2.5 1.25 Nominal Voltage voltage 24 12 9 12 24 Environmental Protection Class NEMA1(IP54) Mating Connectors Solenoid (DIN 43650) Part#692914(Black) Part#692915(Gray)


Performance Curves

Command Signal (%)

FlowCode S

FlowCode H

0 20 40 60 80 1000

2.6

5.3

10

20

7.9 30

10.6

15.9

13.2

GPM

40

60

50

LPM

Flow

(Q)

D3FW Flow Characteristicsat p = 5 Bar (72.5 PSI) per metering edge

P A : B T; or P B : A T

FlowCode M

1) 1)

Shaded area: Actual flow subject to the system load dynamics Note:81and82spools-decreaselimitsby15%

1)

0

4

6

2

15

8

23

10

12

14GPM

38

30

8

45

53LPM

Flow

(Q)

BarPSI

Pressure Drop

D1F* Operating Limitsat 100% Command


013869

200010002073000

2764000

FlowCode H

FlowCode F

FlowCode C

D3F* Operating Limitsat 100% Command


0

10

5

38

19

25 95

76

57

114

35

30

20

15

5045

40

GPM

133

189170

151

LPM

Flow

(Q)

BarPSI

Pressure Drop

069

1000207138

300020002764000

FlowCode H

FlowCode S

FlowCode M

Command Signal (%)

FlowCode H

0 20 40 60 80 1000

1.3 5

2.6 10

4.0

5.3GPM

15

20LPM

Flow

(Q)



FlowCode C

FlowCode F

Return to SECTION

TOC

Return to ALPHA TOC


D_FW.indd, ddp


Series D*FW

A

Return to SECTION

TOC

Return to ALPHA TOC

Dimensions

D1FW with Hirschmann ConnectorsInch equivalents for millimeter dimensions are shown in (**)

D3FW with Hirschmann ConnectorsInch equivalents for millimeter dimensions are shown in (**)

Order plugs separately.

46.0(1.81)

**

80.0(3.15)

105.0(4.13)182.0

(7.17)

A P B

250.0(9.84)

22.5(0.89)

124.0(4.88)

96.0(3.78)

300.0(11.81)

30.0(1.18)

A P B

Return to SECTION

TOC

Return to ALPHA TOC

D1FW_ET.indd, ddp



A

Series D1FW with ATEX CoilsReturn to SECTION

TOC

Return to ALPHA TOC


General DescriptionSeries D1FW direct operated proportional directional control solenoid valves are available with explosion proof solenoids for hazardous conditions. Valves are available in sizes NG6 (CETOP 3).Typical applicatons include reproducible control of acutator speed in rapid/slow speed profiling, and smooth acceleration and deceleration performance.

Features Standard DIN/ISO/CETOP/NFPA interfaces. Progressive flow characteristics for improved low flow

resolution.

Spring centered spool. Wide selection of spool options and flow capacity. Single piece rugged solenoid assembly.

SpecificationsInterface DIN NG6 (CETOP 3)Flow Rating @10 Bar (150 PSI) p (PA, BT) (spool options up to) LPM (GPM) 20 (5.3)Maximum Flow (refer to operating limit curves) LPM (GPM) 48 (12.5)Step Response (time to reach 90% of a 100% step command) ms 100Hysteresis %

D1FW_ET.indd, ddp



A


TOC

Return to ALPHA TOC


Weight:NG6 4.1 kg (9.1 lbs.)

Design SeriesNOTE:


Directional Control Valve

Size

1D

Spool Type

Code Spool Overlap 10% 20%

)) ( (

E01 E81*

E02 E82*

E09 )) ((

Spool Type

Flow Control

F

Code Description E Explosion Proof

Valve Accessories

Style Solenoid Accessories

EFlowOpen

Loop

W

Code Description N Nitrile V Fluorocarbon

Seal Solenoid Voltage

L

Refer to factory for ratio spool options.* Use E01 or E02 for new applications.

Refer to factory for ratio spool options.* E09 spools only available where indicated. Type E spool only.# Not available with E81, E82.

Flow at p 5 Bar (72.5 PSI) per metering edge

LPM (GPM)Code

C 7.5 (2.0)*F 15 (4.0)H 20 (5.3)#

Bolt Kit:BK209 (4) 10-24x1.25 SHCSBK375 (4) M5 x 30mm SHCS

T

Code Description T Exd IIc ATEX / CSA

Code Description L 6 VDC

Code Description

1DIN NG6CETOP 3NFPA D03

Code Style

C

E

K

A B

P T

A B

P TA B

P T

D1FW_ET.indd, ddp



A


TOC

Return to ALPHA TOC

Explosion ProofInterface DIN NG6 (CETOP 3)Solenoid Order Code L Nominal Resistance ohms 2.0 Nominal Current amps 2.4 Nominal Voltage voltage 5 Nominal Wattage watts 11.5Environmental Protection Class IP66

Explosion Proof RatingsCSA Exd IIc, AExd Class I Zone IATEX EEx d IIc G T4 -54C to 90C

Command Signal (%)

FlowCode H

0 20 40 60 80 1000

1.3 5

2.6 10

4.0

5.3GPM

15

20LPM

Flow

(Q)



FlowCode C

FlowCode F

Electrical Specifications

Performance Curves

0

4

6

2

15

8

23

10

12

14GPM

38

30

8

45

53LPM

Flow

(Q)

BarPSI

Pressure Drop

D1FW Operating Limitsat 100% Command


01386920001000

2073000

2764000

FlowCode H

FlowCode F

FlowCode C


D1FW_ET.indd, ddp



A


TOC

Return to ALPHA TOC

Inch equivalents for millimeter dimensions are shown in (**)

Dimensions


A

NotesCatalog HY14-2550/US

D1FW_ET.indd, ddp

Return to SECTION

TOC

Return to ALPHA TOC


D1FB.indd, ddp



Series D1FB

A

Return to SECTION

TOC

Return to ALPHA TOC

D1FB D1FB OBE

D1FB D1FB OBE

D1FB*0 OBE Spool/Sleeve Design

Parametrizing connection

Main connection(always on B-side)

D1FB*3 OBE Spool/Body Design

A B

General DescriptionSeries D1FB (NG6) proportional directional valves are available with and without onboard electronics (OBE).D1FB OBE:The digital onboard electronics is situated in a robust metal housing, which allows the usage under rough environmental conditions.The nominal values are factory set. The cable connection to a serial RS-232 interface is available as an accessory.D1FB for external electronics: The parameters can be saved, changed and dupli-cated in combination with the digital power amplifier PWD00A-400.The valve parameters can be edited with the common ProPxD software for both versions.Series D1FB valves can be ordered with spool/sleeve design (D1FB*0) for maximum precision, as well as spool/body design (D1FB*3) for high nominal flow see functional limit curves for maximum flow capability.

Features Spool/sleeve and spool/body. 3 command options for D1FB OBE:

+/- 10V, 420mA, +/- 20mA High repeatability from valve to valve.

Low hysteresis. Manual override. Digital onboard electronics.



D1FB.indd, ddp


A

Return to SECTION

TOC

Return to ALPHA TOC

Series D1FB (Offboard Electronics)

DDirectional Control

Valves Size Flow

ControlStyle Seal Solenoid

Voltage

B

Weight:D1FB 2.2 kg (4.9 lbs.)

F 0Spool Solenoid

AccessoriesDesign

1

Code Description

W* Connector as per DIN 43650 without plug

J Connector DT04-2P "Deutsch"

Code Description

0 Spool/sleeve design

3 Spool/body design

D1FB*0: Spool/Sleeve DesignCode Solenoid

M 9V/2.7AJ 24V/0.8A

D1FB*3: Spool/Body DesignCode Solenoid

K 12V / 2.2AJ 24V / 1.1A

Code Description


Design SeriesNOTE:


Code DescriptionN NitrileV Fluorocarbon

D1FB*0: Spool/Sleeve DesignOverlap

Code SpoolFlow LPM (GPM)

at p 5 Bar (72.5 PSI) per metering edge

E01HE01FE01C

20 (5.3)12 (3.2)6 (1.6)

E02HE02FE02C

20 (5.3)12 (3.2)6 (1.6)

E03HE03FE03C

20 (5.3)12 (3.2)6 (1.6)

B31HB31F

QB = QA /2 20/10 (5.3/2.6) 12/6 (3.2/1.6)

B32HB32F

QB = QA /2 20/10 (5.3/2.6) 12/6 (3.2/1.6)

D1FB*3: Spool/Body DesignOverlap



E01KE01HE01F

30 (7.9)20 (5.3)10 (2.6)

E02KE02HE02F

30 (7.9)20 (5.3)10 (2.6)

Standard Dynamics Standard

Repeatability

Bolt Kit:BK209 (4) 10-24x1.25 SHCSBK375 (4) M5x30

* Please order plugs separately.

Code Style

C

E

K



D1FB.indd, ddp



A

Return to SECTION

TOC

Return to ALPHA TOC

Series D1FB (Onboard Electronics)

Design SeriesNOTE:



Valves Size Flow

ControlStyle Seal Input

Signal

B


Please order plugs separately. See Accessories.

Parametrizing cable OBE => RS-232 Item no. 40982923

F 0SpoolStandard

Dynamics Standard

Repeatability

Options Design

1

Code Description


Code Input signal 1) Function Port OptionsF0 0...+/-10V 0...+10V > P-A 6 + PE Potentiometer

supply

G0 0...+/-20mA 0...+20mA > P-A 6 + PE

S0 4...20mA 12...20mA > P-A 6 + PE

W5 2) 0...+/-10V4...20mA

0...+10V > P-A12...20mA > P-A

11 + PE Potentiometer supply & command

preset channel

1) Single solenoid always 0...+10V respectively 4...20 mA

2) Factory set 10V on delivery

D1FB*0: Spool/Sleeve DesignOverlap



E01HE01FE01C

20 (5.3)12 (3.2)6 (1.6)

E02HE02FE02C

20 (5.3)12 (3.2)6 (1.6)

E03HE03FE03C

20 (5.3)12 (3.2)6 (1.6)

B31HB31F

QB = QA /2 20/10 (5.3/2.6) 12/6 (3.2/1.6)

B32HB32F

QB = QA /2 20/10 (5.3/2.6) 12/6 (3.2/1.6)

D1FB*3: Spool/Body DesignOverlap



E01KE01HE01F

30 (7.9)20 (5.3)10 (2.6)

E02KE02HE02F

30 (7.9)20 (5.3)10 (2.6)

Code Description


3 Spool/body design


Code Style

C

E

K

Bolt Kit:BK209 (4) 10-24x1.25 SHCSBK375 (4) M5x30



D1FB.indd, ddp


A

Return to SECTION

TOC

Return to ALPHA TOC


GeneralDesign Direct operated proportional DC valveActuation Proportional solenoidSize NG6 / CETOP 3 / NFPA D03Mounting Interface DIN 24340 / ISO 4401 / CETOP RP121 / NFPAMounting Position UnrestrictedAmbient Temperature [C] -20...+60; (-4F...+140F)MTTFD Value (OBE) [years] 150 (75)Vibration Resistance [g] 10 Sinus 5...2000 Hz acc. IEC 68-2-6

30 Random noise 20...2000 Hz acc. IEC 68-2-3615 Shock acc. IEC 68-2-27

HydraulicMaximum Operating Pressure Ports P, A, B 350 Bar (5075 PSI); Port T 210 Bar (3045 PSI)Maximum Pressure Drop PABT / PBAT 350 Bar (5075 PSI)Fluid Hydraulic oil as per DIN 51524...51535, other on requestFluid Temperature [C] -20...+60; (-4F...+140F)Viscosity Permitted [cSt] Recommended [cSt]

/ [mm2/s]/ [mm2/s]

20...380 (93...1761 SSU)30...80 (139...371 SSU)

Filtration ISO 4406 (1999) 18/16/13 (acc. NAS 1638: 7)Nominal Flow at p= 5 Bar (72.5 PSI) per Control Edge *

D1FB*0 (Spool/sleeve) D1FB*3 (Spool/body)6 LPM (1.6 GPM) / 12 LPM (3.2 GPM) /

20 LPM (5.3 GPM)10 LPM (2.6 GPM) / 20 LPM (5.3 GPM) /

30 LPM (7.9 GPM)Leakage at 100 Bar (1450 PSI)Per Land [ml/min]


D1FB.indd, ddp



A

Return to SECTION

TOC

Return to ALPHA TOC


ElectricalDuty Ratio [%] 100 ED; CAUTION: Coil temperature up to 150C (302F) possibleProtection Class IP65 in accordance with EN 60529 (plugged and mounted)Supply Voltage/ripple DC [V] 18...30, ripple < 5% eff., surge freeCurrent Consumption Maximum [A] 2.0

Pre-fusing Medium Lag [A] 2.5Input Signal Codes F0 & W5 Voltage [V] +10...0...-10, ripple < 0.01 % eff., surge free, Ri = 100kOhm, 0...+10V => P -> A Codes S0 & W5 Current [mA] 4...12...20, ripple < 0.01 % eff., surge free, Ri = 200Ohm, 12...20mA => P -> A

< 3.6 mA = enable off,> 3.8 mA = enable on (acc. to NAMUR NE43)

Code G0 [mA] +20...0...-20, ripple < 0.01 % eff., surge free, Ri = 200Ohm, 0...+20mA => P -> ADifferential Input Maximum Codes F0, G0 & S0 [V]

30 for terminal D and E against PE (terminal G)11 for terminal D and E against 0V (terminal B)

Code W5 [V] 30 for terminal 4 and 5 against PE (terminal PE)11 for terminal 4 and 5 against 0V (terminal 2)

Voltage References:

Not a powered output, +10 VDC at Pin C, -10 VDC at Pin F Only for 10K Ohm pots

Channel Recall Signal [V] 0...2.5: off / 5...30: on / Ri = 100 kOhmAdjustment Ranges: Min [%] 0...50 Max [%] 50...100 Ramp [s] 0...32.5Interface RS-232, parametrizing connection 5 poleEMC EN 61000-6-2, EN 61000-6-4Central Connection Codes F0, G0 & S0 Code W5

6 + PE acc. to EN 175201-80411 + PE acc. to EN 175201-804

Wiring Minimum Codes F0, G0 & S0 Code W5

[mm][mm]

7 x 1.0 (AWG16) overall braid shield 11 x 1.0 (AWG20) overall braid shield

Wiring Length Maximum [m] 50 (164 ft.)

Specifications


D1FB.indd, ddp


Series D1FB

A

Return to SECTION

TOC

Return to ALPHA TOC

Functional Limits At 25%, 50%, 75% and 100% command signal (symmetric flow). At asymmetric flow a reduced flow limit has to be considered typically approx. 10% lower.

All performance curves measured with HLP46 at 50C (122F).

0

40

350

30

20

10

30025020015010050

70

30

20

10

18.5

7.9

5.3

2.6

Flow

(Q)

0

GPM LPM

0 50725

1001450

1502175

2002900

2503625

3505075

Pressure Drop P PT

BarPSI

3004350

A

P T

B

100%

75%

25%50%

4010.6

406015.9

405013.2

Spool Type E01K

Flo

w Q

0

40

350

30

20

10

30025020015010050

40

30

20

10

10.6

7.9

5.3

2.6

Flow

(Q)

0

GPM LPM

0 50725

1001450

1502175

2002900

2503625

3505075

Pressure Drop P PT

BarPSI

3004350

A

P T

B

100%

75%

25%

50%

Spool Type E01H

D1FB Flow

D1FB OBE Flow (Electrically set to opening point 10%)

100

75

50

25

P-BA-T

Spool Type E01/02/03

P-AB-T

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)

% at p = 5 Bar (72.5 PSI) per metering edge

100

75

50

25

P-BA-T


P-AB-T

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)


A-T

P-B

Spool Type B31/32

B-T

100

75

50

25

%

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)

P-A

at p = 5 Bar (72.5 PSI) per metering edge

A-T

P-B

Spool Type B31/32

P-A

100

75

50

25

%

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)

B-T


Performance Curves


D1FB.indd, ddp



Series D1FB

A

Return to SECTION

TOC

Return to ALPHA TOC

Code W5 11 + PE acc. to EN 175201-804

Code F0 6 + PE acc. to EN 175201-804

Code G0, S0 6 + PE acc. to EN 175201-804

Block Diagrams Wiring


D1FB.indd, ddp


Series D1FB

A

Return to SECTION

TOC

Return to ALPHA TOC

The parametrizing cable may be ordered under item no. 40982923.

Features Simple editing of all parameters. Storage and loading of optimized parameter adjustments. Executable with all Windows operating systems from

Windows 95 upwards. Communication between PC and electronics via serial

interface RS-232.The valve electronics cannot be connected to a PC with a standard USB cable this can result in damages of PC and/or valve electronics.Simple to use interface program. Download free of charge www.parker.com/euro_hcd Services downloads

ProPxD Interface ProgramThe ProPxD software allows quick and easy setting of the digital valve electronics. Individual parameters as well as complete settings can be viewed, changed and saved via the comfortable user interface. Parameter sets saved in the non-volatile memory can be loaded to other valves of the same type or printed out for documentation purposes.



D1FB.indd, ddp



A

Return to SECTION

TOC

Return to ALPHA TOC


D1FB*E


D1FB*C

D1FB*C*0 with DT04-2P Deutsch Connector (Only C style shown)

BK375 4x M5x30 7.6 Nm (5.6 lb.-ft.) Nitrile: SK-D1FB DIN 912 12.9 15 % Fluorocarbon: SK-D1FBV BK209 4x 10-24x1.25

Surface Finish Seal

221.0 (8.70)

46.0(1.81)

85.0(3.35)

15.0(0.59)

17.0(0.67)

22.0(0.87)

72.0(2.83)

P

9.5(0.37)

5.5 (0.22)

BAT

P

~53.0( 2.09)~

46.0(1.81)

17.0(0.67)

72.0(2.83)

158.0(6.22)

22.0(0.87)

9.5(0.37)

5.5 (0.22)

BAT

P

P

15.0(0.59)

85.0(3.35)

D1FB*K

~53.0( 2.09)~

15.0(0.59)

85.0(3.35)

46.0(1.81)

17.0(0.67) 132.0

(5.20)158.0(6.22)

22.0(0.87)

9.5(0.37)

5.5 (0.22)

BAT

P

P

68.0(2.68)

22.0(0.87)

17.0(0.67)

72.0(2.83)

221.0 (8.70)

BAT

P

P

9.5(0.37)

5.5 (0.22)

46.0(1.81)

D1FB*C*3

71.3(2.81)

Dimensions


D1FB.indd, ddp


A

Return to SECTION

TOC

Return to ALPHA TOC


D1FB*E OBE


D1FB*C OBE

BK375 4x M5x30 7.6 Nm (5.6 lb.-ft.) Nitrile: SK-D1FB DIN 912 12.9 15 % Fluorocarbon: SK-D1FBV BK209 4x 10-24x1.25

Surface Finish Seal

D1FB*K OBE

9.5(0.37)

158.0(6.22)

46.0(1.81)

132.0(5.20)

5.5(0.22)

125.0(4.94)

22.0(0.87)

17.0(0.67)

BAT

P

P

Dimensions


D3FB.indd, ddp



Series D3FB

AGeneral DescriptionSeries D3FB (NG10) proportional directional valves are available with and without onboard electronics (OBE).D3FB OBE:The digital onboard electronics is situated in a robust metal housing, which allows the usage under rough environmental conditions.The nominal values are factory set. The cable connec-tion to a serial RS-232 interface is available as acces-sory.D3FB for external electronics: The parameters can be saved, changed and duplicated in combination with the digital power amplifier PWD00A-400.The valve parameters can be edited with the common ProPxD software for both versions.Series D3FB valves can be ordered with spool/sleeve design (D3FB*0) for maximum precision, as well as spool/body design (D3FB*3) for high nominal flow see functional limit curves for maximum flow capability.

Features Spool/sleeve and spool/body. 3 command options for D3FB OBE:

+/- 10V, 420mA, +/- 20mA

High repeatability from valve to valve.

D3FB OBE

D3FB OBE

D3FB

D3FB

D3FB*0 OBE Spool/Sleeve Design

D3FB*3 OBE Spool/Body Design

Parametrizing Connection

Main Connection(always on B-side)

Low hysteresis. Manual override. Digital onboard electronics.

Return to SECTION

TOC

Return to ALPHA TOC



D3FB.indd, ddp


A



Valves Size Flow

ControlStyle Seal Solenoid

Voltage

B W


F 0Spool Solenoid

AccessoriesDesign

3

Code Description

W* Connector as per DIN 43650 without plug* Please order plugs separately. See Accessories.

Code Style

C

E

K

D3FB*0: Spool/Sleeve DesignCode Solenoid

K 12V / 2.95A

D3FB*3: Spool/Body DesignCode Solenoid

K 12V / 2.95AJ 24V / 1.5A

Design SeriesNOTE:


D3FB*0: Spool/Sleeve Design


at p 5 Bar (72.5 PSI)per metering edge

E01ME01S

40 (10.6)60 (15.9)

E02ME02S

40 (10.6)60 (15.9)

B31MB31S

QB = QA /2 40 / 20 (10.6 / 5.3)60 / 30 (15.9 / 7.9)

B32MB32S

QB = QA /2 40 / 20 (10.6 / 5.3)60 / 30 (15.9 / 7.9)

D3FB*3: Spool/Body Design



E01ME01SE01U

40 (10.6)60 (15.9)80 (21.2)

E02ME02SE02U

40 (10.6)60 (15.9)80 (21.2)

Code Description


3 Spool/body design


Code Description



Repeatability

Bolt Kit:BK98 (4) 1/4-24x1.625 SHCSBK385 (4) M6x40

Return to SECTION

TOC

Return to ALPHA TOC



D3FB.indd, ddp



A





E01ME01S

40 (10.6)60 (15.9)

E02ME02S

40 (10.6)60 (15.9)

B31MB31S

QB = QA /2 40 / 20 (10.6 / 5.3)60 / 30 (15.9 / 7.9)

B32MB32S

QB = QA /2 40 / 20 (10.6 / 5.3)60 / 30 (15.9 / 7.9)

Design SeriesNOTE:



Valves Size Flow

ControlStyle Seal Input

Signal

B


F 0Spool Options Design

3

Code Input signal 1) Function Port OptionsF0 0...+/-10V 0...+10V > P-A 6 + PE Potentiometer

supply

G0 0...+/-20mA 0...+20mA > P-A 6 + PE

S0 4...20mA 12...20mA > P-A 6 + PE

W5 2) 0...+/-10V4...20mA

0...+10V > P-A12...20mA > P-A

11 + PE Potentiometer supply & command

preset channel1) Single solenoid always 0...+10V respectively 4...20 mA

2) Factory set 10V on delivery

Code Description


3 Spool/body design


Code Description



Repeatability

Bolt Kit:BK98 (4) 1/4-20x1.625 SHCSBK385 (4) M6x40




E01ME01SE01U

40 (10.6)60 (15.9) 80 (21.2)

E02ME02SE02U

40 (10.6)60 (15.9)80 (21.2)

Please order plugs separately. See Accessories.


Code Style

C

E

K

Return to SECTION

TOC

Return to ALPHA TOC



D3FB.indd, ddp


A


GeneralDesign Direct operated proportional DC valveActuation Proportional solenoidSize NG10 / CETOP 5 / NFPA D05Mounting Interface DIN 24340 / ISO 4401 / CETOP RP121 / NFPAMounting Position UnrestrictedAmbient Temperature [C] -20...+60; (-4F...+140F)MTTFD Value (OBE) [years] 150 (75)Vibration Resistance [g] 10 Sinus 5...2000 Hz acc. IEC 68-2-6


HydraulicMaximum Operating Pressure Ports P, A, B 350 Bar (5075 PSI); Port T 210 Bar (3045 PSI)Maximum Pressure Drop PABT / PBAT 350 Bar (5075 PSI)Fluid Hydraulic oil as per DIN 51524...51535, other on requestFluid Temperature [C] -20...+60; (-4F...+140F)Viscosity Permitted [cSt] Recommended [cSt]

/ [mm2/s]/ [mm2/s]

20...380 (93...1761 SSU)30...80 (139...371 SSU)

Filtration ISO 4406 (1999) 18/16/13 (acc. NAS 1638: 7)Nominal Flow at p=5 Bar (72.5 PSI) per Control Edge *

D3FB*0 (Spool/sleeve) D3FB*3 (Spool/body)

40 LPM (10.6 GPM) / 60 LPM (15.9 GPM) 40 LPM (10.6 GPM) 60 LPM (15.9 GPM) / 80 LPM (21.2 GPM)Leakage at 100 Bar (1450 PSI) [ml/min]


D3FB.indd, ddp



A


ElectricalDuty Ratio [%] 100 ED; CAUTION: Coil temperature up to 150C (302F) possibleProtection Class IP65 in accordance with EN 60529 (plugged and mounted)Supply Voltage/Ripple DC [V] 18...30, ripple < 5% eff., surge freeCurrent Consumption Maximum [A] 3.5Pre-fusing Medium Lag [A] 4.0Input Signal Codes F0 & W5 Voltage [V] +10...0...-10, ripple < 0.01 % eff., surge free, Ri = 100kOhm, 0...+10V => P -> A Codes S0 & W5 Current [mA] 4...12...20, ripple < 0.01 % eff., surge free, Ri = 200Ohm, 12...20mA => P -> A

< 3.6 mA = enable off,> 3.8 mA = enable on (acc. to NAMUR NE43)

Code G0 [mA] +20...0...-20, ripple < 0.01 % eff., surge free, Ri = 200Ohm, 0...+20mA => P -> ADifferential Input Maximum Codes F0, G0 & S0 [V] 30 for terminal D and E against PE (terminal G)

11 for terminal D and E against 0V (terminal B)

Code W5

Voltage References:

[V]

30 for terminal 4 and 5 against PE (terminal PE)11 for terminal 4 and 5 against 0V (terminal 2)

Not a powered output Only for 10K Ohm pots

Channel Recall Signal [V] 0...2.5: off / 5...30: on / Ri = 100 kOhmAdjustment Ranges: Minimum [%] 0...50 Maximum [%] 50...100 Ramp [s] 0...32.5Interface RS-232, parametrizing connection 5 poleEMC EN 61000-6-2, EN 61000-6-4Central Connection Codes F0, G0 & S0 Code W5

6 + PE acc. to EN 175201-80411 + PE acc. to EN 175201-804

Wiring Minimum Codes F0, G0 & S0 Code W5

[mm][mm]

7 x 1.0 (AWG16) overall braid shield 11 x 1.0 (AWG20) overall braid shield

Wiring Length Maximum [m] 50 (164 ft.)

Return to SECTION

TOC

Return to ALPHA TOC

Specifications


D3FB.indd, ddp


Series D3FB

A


(Electrically set to opening point 10%)

Functional Limits 100% command signal (symmetric flow). At asymmetric flow a reduced flow limit has to be considered typically approx. 10% lower.

100

75

50

25

P-BA-T

Spool Type E*

P-AB-T

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)


A-T

P-B

Spool Type B*

B-T

100

75

50

25

%

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)

P-A



A

P T

B

0 801160

1201740

40580

1602320

2002900

240 2803480 4060

Pressure Drop P

BarPSI

250

200

150

100

66.1

52.9

39.7

26.5Flow

(Q)

0

GPM LPM

5013.2

Spool Type E01S

D3FB*0

0 801160

1201740

40580

1602320

2002900

240 2803480 4060

Pressure Drop P

BarPSI

250

200

150

100

66.1

52.9

39.7

26.5Flow

(Q)

0

GPM LPM

5013.2

A

P T

BSpool Type E01U

D3FB*3

Return to SECTION

TOC

Return to ALPHA TOC

Performance Curves


D3FB.indd, ddp



A

Series D3FB

Code W5 11 + PE acc. to EN 175201-804

Code F0 6 + PE acc. to EN 175201-804


Return to SECTION

TOC

Return to ALPHA TOC



D3FB.indd, ddp


A

Series D3FBReturn to SECTION

TOC

Return to ALPHA TOC








D3FB.indd, ddp



A

Series D3FB (Offboard Electronics)Return to SECTION

TOC

Return to ALPHA TOC

Dimensions


D3FB*C

D3FB*K

BK385 4x M6x40 13.2 Nm (9.7 lb.-ft.) Nitrile: SK-D3FB DIN 912 12.9 15 % Fluorocarbon: SK-D3FBV BK98 4x 1/4-20x1.62

SealSurface Finish

Order plugs separately.


D3FB.indd, ddp


A

Series D3FB (Onboard Electronics)Return to SECTION

TOC

Return to ALPHA TOC

Dimensions


D3FB*C OBE

D3FB*E OBE


SealSurface Finish


NotesCatalog HY14-2550/US

D3FB.indd, ddp

A

Return to SECTION

TOC

Return to ALPHA TOC


D_1FB.indd, ddp


Series D*1FB

A

Return to SECTION

TOC

Return to ALPHA TOC


D91FB OBE

D91FB D91FB OBE

General Description Series D*1FB pilot operated proportional directional valves come in 4 sizes:D31FB NG10 (CETOP 5)D41FB NG16 (CETOP 7)D91FB NG25 (CETOP 8)D111FB NG32 (CETOP 10)The valves are available with and without onboard electronics (OBE).D*1FB OBE:The digital onboard electronics is situated in a robust metal housing, which allows usage under rough envi-ronmental conditions.The nominal values are factory set. The cable con-nection to a serial RS-232 interface is available as an accessory.D*1FB for external electronics: The parameters can be saved, changed and dupli-cated in combination with the digital power amplifier PWD00A-400.Series D*1FB valve parameters can be edited with the common ProPxD software for both versions.The D*1FB valves work with barometric feedback of the main stage to the pressure reducing pilot valve. The pilot control pressure of 25 Bar (363 PSI) allows high flow rates of maximum of stability.The innovative integrated regenerative function into the A-line (optional) allows new energy saving circuits for differential cylinders. The hybrid version can be switched between regenerative mode and standard mode at any time.

Features Progressive flow characteristics for precise adjustment of

flow rate.

High flow capacity.Digital onboard electronics.Center position monitoring optional. New: Switchable regenerative hybrid version.

Parametrizing Connection

Main Connection (always on B-side of main stage)

D*1FB D*1FBZ

B A

T A P BT


D_1FB.indd, ddp



Series D*1FB

A

Return to SECTION

TOC

Return to ALPHA TOC


D*1FBR and D*1FBZRegenerative Valve D*1FBR

Hybrid Valve D*1FBZ

Size SpoolPort

A-T P-A P-B B-A (R-Valve) B-A (Hybrid) B-T (Hybrid)D41FBR/Z 31/32 100% 50% 100% 50% 45% 20%D91FBR/Z 31/32 100% 50% 100% 50% 50% 25%D111FBR/Z 31/32 100% 50% 100% 50% 50% 20%

Flow Rate in % of Nominal Flow

D*1FBR (Regenerative Valve)Cylinder extending

D*1FBZ (Hybrid Valve) Cylinder extending Cylinder extending regenerative mode standard mode (high speed) (high force)


D_1FB.indd, ddp


A

Series D*1FB (Offboard Electronics)Return to SECTION

TOC

Return to ALPHA TOC


DDirectional

Control Valves Size Flow

ControlFlow Seal Solenoid

Voltage

B

Weight:D31FB 8.1 kg (17.9 lbs.)D41FB 10.8 kg (23.8 lbs.)D91FB 19.0 kg (41.9 lbs.)D111FB 68.0 kg (149.9 lbs.)

F CSpoolDynamics

StandardSolenoid

ConnectorValve

Accessories

5) Please order plugs separately.

See Accessories.6) Not available with hybrid function.

Code Description0 Standard

8 7) Monitor Switch

L 8)Hybrid valve 24V normally closed for spool type Z

Design SeriesNOTE:



1) For enlarged connections 32 mm

Code Description3 NG10 / CETOP 54 NG16 / CETOP 7

9 1) NG25 / CETOP 811 NG32 / CETOP 10

NG6 Pilot

1Pilot

ConnectionSpool

Position

Code Inlet Drain1 Internal External2 External External4 Internal Internal5 External Internal

Code Description

W 5) Connector as per DIN 43650 without plug

J 5) 6) Connector DT04-2P "Deutsch"

Bolt Kits:D31FB BK98 (4) 1/4-20x1.625 SHCSD41FB BK160 (4) 3/8-16x2.5 SHCS (2) 1/4-20x2.5 SHCSD91FB BK228 (6) 1/2-13x3 SHCSD111FB BK150 (6) 3/4-10x3.5 SHCS

Code SolenoidK 12V / 2.5AJ 24V / 1.1ACode

Flow LPM (GPM) at p 5 Bar (72.5 PSI)

per metering edge D31 D41 D91 D111

B 100 3) 4)

(26.4)

C 75 4)

(19.8)130 3) 4) (34.3)

D 90 4)

(23.8)

E 120 (31.7) 250 3) 4) (66.0)

F 200 (52.8)

H 400 (105.7)

L 1000 (264.2)

Standard

Code Spool Type

E01

E02

B31QB = QA /2

B32QB = QA /2

R31

R32

Z31

Z32

NEW: Hybrid Function 2)

Code Spool Type

NEW: Regenerative Function

Code Spool Type

3) Not available with spool type B31 und B32.

4) Not available with regenerative or hybrid function.

7) Not available for D111FBZ

8) See page A33 for regenerative and hybrid spool information. (not available in D31FB)

D31FB spool type: R31 R32

2) not available in D31FB.


D_1FB.indd, ddp



A

Series D*1FB (Onboard Electronics)Return to SECTION

TOC

Return to ALPHA TOC


CodeInput

Signal Function Connection OptionF0 0...10V 0...+10V P->B 6 + PE Pot.-supply

G0 0...20mA 0...+20mA P->B 6 + PE

M0 0...10V 0...+10V P->A 6 + PE Pot.-supply

S0 4...20mA 12...20mA P->A 6 + PE

W5 0...10V 4...20mA

0...+10V P->A 12...20mA P->A

11 + PE Pot.-supply + Preset

Commands

Please order plugs separately. See Accessories.Parametrizing cable OBE => RS-232 Item no. 40982923

Weight:D31FB 8.4 kg (18.5 lbs.)D41FB 11.1 kg (24.5 lbs.)D91FB 19.3 kg (42.6 lbs.)D111FB 68.3 kg (150.6 lbs.)

DDirectional

Control Valves Size Flow

ControlFlow Seal

BF CSpoolOnboard

ElectronicsInput

Signal / OptionsValve

AccessoriesDesign SeriesNOTE:


1) With enlarged connections

32 mm

Code Description3 NG10 / CETOP 54 NG16 / CETOP 7

9 1) NG25 / CETOP 811 NG32 / CETOP 10

Code

Flow LPM (GPM) at p 5 Bar (72.5 PSI)

per metering edge D31 D41 D91 D111

B 100 3) 4)

(26.4)

C 75 4)

(19.8)130 3) 4) (34.3)

D 90 4)

(23.8)

E 120 (31.7) 250 3) 4) (66.0)

F 200 (52.8)

H - 400 (105.7)

L - 1000 (264.2)

NG6 Pilot

1Pilot

ConnectionSpool

Position

Code Inlet Drain1 Internal External2 External External4 Internal Internal5 External Internal


Bolt Kits:D31FB BK98 (4) 1/4-20x1.625 SHCSD41FB BK160 (4) 3/8-16x2.5 SHCS (2) 1/4-20x2.5 SHCSD91FB BK228 (6) 1/2-13x3 SHCSD111FB BK150 (6) 3/4-10x3.5 SHCS

Standard

Code Spool Type

E01

E02

B31QB = QA /2

B32QB = QA /2

R31

R32

Z31

Z32

NEW: Hybrid Function 2)

Code Spool Type

NEW: Regenerative Function

Code Spool Type

Code Description0 Standard

8 5) Monitor Switch

L 6)Hybrid valve 24V normally closed for spool type Z

5) Not available for

D111FBZ.6) See page A33 for

regenerative and hybrid spool information. (not available in D31FB)

3) Not available with spool type B31 und B32.

4) Not available with regenerative or hybrid function.

D31FB spool type: R31 R32

2) not available in D31FB.


D_1FB.indd, ddp


A

Series D*1FBReturn to SECTION

TOC

Return to ALPHA TOC

Specifications

GeneralDesign Pilot operated DC valveActuation Proportional solenoidSize NG10 (CETOP 5) NG16 (CETOP 7) NG25 (CETOP 8) NG32 (CETOP 10)Mounting Interface DIN 24340 / ISO 4401 / CETOP RP121 / NFPAMounting Position UnrestrictedAmbient Temperature [C] -20...+60; (-4F...+140F)MTTFD Value (OBE) [years] 75 (50)Vibration Resistance [g] 10 Sinus 5...2000 Hz acc. IEC 68-2-6


HydraulicMaximum Operating Pressure Pilot Drain Internal: Ports P, A, B, X 350 Bar (5075 PSI); Port T, Y 185 Bar (2683 PSI)

NG10: Port T, Y 15 Bar (218 PSI)Pilot Drain External: Ports P, A, B, T, X 350 Bar (5075 PSI); Port Y 185 Bar (2683 PSI) NG10: Port Y 15 Bar (218 PSI)

Fluid Hydraulic oil as per DIN 51524...51535, other on requestFluid Temperature [C] -20...+60; (-4F...+140F)Viscosity Permitted [cSt] Recommended [cSt]

/ [mm2/s] / [mm2/s]

20...380 (93...1761 SSU)30...80 (139...371 SSU)

Filtration ISO 4406 (1999) 18/16/13 (acc. NAS 1638: 7)Nominal Flow at p=Bar (72.5 PSI) per Control Edge *

D31FB D41FB D91FB D111FB

75 LPM (19.8 GPM) 90 LPM (23.8 GPM) 120 LPM (31.7 GPM)



Leakage at 100 Bar (1450 PSI) [ml/min] 100 200 600 1000Pilot Supply Pressure Minimum 30 Bar (435 PSI) [+T/Y pressure]; Maximum 350 Bar (5075 PSI)

Optimal Dynamics at 50 Bar (725 PSI)Pilot Flow at 100 Bar (1450 PSI)


D_1FB.indd, ddp



A


TOC

Return to ALPHA TOC

Specifications

Electrical Monitor Switch (Offboard Electronics)Protection Class IP65 in accordance with EN 60529 (plugged and mounted)Ambient Temperature [C] 0...70; (32F...158F)Supply Voltage/Ripple [V] 18...42, ripple


D_1FB.indd, ddp


Series D*1FB

A

Return to SECTION

TOC

Return to ALPHA TOC


D*1FB Flow

D*1FB OBE Flow (Electrically set to opening point 10%)

100

70

50

30

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)


P-AB-T

P-BA-T

Spool Type E*

40

80

90

60

10

20

0

100

70

50

30

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)


40

80

90

60

10

20

0

P-B

A-T

B-T

P-A

Spool Type B*

100

70

50

30

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)


P-AB-T

1) P-BA-T

1)

40

80

90

60

10

20

0

Spool Type E*100

70

50

30

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)


40

80

90

60

10

20

0

P-B 1)B-T 1)

P-A 1) A-T 1)

Spool Type B*


All performance curves measured with HLP46 at 50C (122F). 1) Flow direction depending on ordering code.

Performance Curves

Electrical (Hybrid Option)Duty Ratio [%] 100 ED; CAUTION: Coil temperature up to 150C (302F) possibleProtection Class IP65 in accordance with EN 60529 (plugged and mounted)

D41 D91 D111Supply Voltage [V] 24 24 24Tolerance Supply Voltage [%] 10 10 10Current Consumption [A] 1.21 0.96 1.29Power Consumption [W] 29 23 31Solenoid Connection Connector as per EN 175301-803Wiring Minimum [mm] 3 x 1.5 recommendedWiring Length Maximum [m] 50 (164 ft.) recommendedWith electrical connections the protective conductor (PE W) must be connected according to the relevant regulations.

Specifications (cont.)


D_1FB.indd, ddp



Series D*1FB

A

Return to SECTION

TOC

Return to ALPHA TOC

Performance Curves

D*1FB R/Z (Regenerative and Hybrid)D41FB R/Z D91FB R/ZSpool Code R/Z31/32 Spool Code R/Z31/32

D41FB R/Z OBE D91FB R/Z OBESpool Code R/Z31/32 Spool Code R/Z31/32



100

70

50

30

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)


40

80

90

60

10

20

0

P-BA-T

B-A(R*, Z*)P-A(R*)

B-A

B-T

50%40%(Z*)20%(Z*)

100

70

50

30

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)


40

80

90

60

10

20

0

P-BA-T

B-AP-A,

50%(R/Z*)

25%(Z*)B-T

100

70

50

30

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)


40

80

90

60

10

20

0

P-BA-T

B-A(R*, Z*)P-A(R*)

B-A

B-T

50%40%(Z*)20%(Z*)

100

70

50

30

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)


40

80

90

60

10

20

0

P-BA-T

B-AP-A,

50%(R/Z*)

25%(Z*)B-T


D_1FB.indd, ddp


Series D*1FB

A

Return to SECTION

TOC

Return to ALPHA TOC

Wiring Connections

Monitor Switch M12x1 Pin Assignment

1 + Supply 18...42V2 Output B (normally closed)3 0V4 Output A (normally closed)5 Earth ground

The neutral position is monitored. The signal changes after less than 10% of the spool stroke.

Signal Output A (pin 4) Output B (pin 2)neutral closed closed

open closed

closed open

Protection Class IP65 in accordance with EN 60529 (plugged and mounted)Ambient Temperature [C] 0...70; (32F...158F)Supply Voltage/Ripple [V] 18...42, ripple < 10% eff.Current Consumption without Load [mA] < 30Maximum Output Current per Channel, Ohmic [mA] 400Minimum Output Load per Channel, Ohmic [kOhm] 100Maximum Output Drop at 0.2A [V] < 1.1Maximum Output Drop at 0.4A [V] < 1.6EMC EN 50081-1, EN50082-2Maximum tol. Ambient Field Strength [A/m] 1200Minimum Distance to Next AC solenoid [m] 0.1Interface 4+PE acc. IEC 61076-2-101 (M12)Wiring Minimum [mm] 5 x 0.5 (AWG 20) overall braid shieldWiring Length Maximum [m] 50 (164 ft.)

Electrical Monitor Switch


D_1FB.indd, ddp



A

Series D*1FB

Code W5 11 + PE acc. to EN 175201-804

Return to SECTION

TOC

Return to ALPHA TOC


Code F0, M0 6 + PE acc. to EN 175201-804



D_1FB.indd, ddp


A


TOC

Return to ALPHA TOC








D_1FB.indd, ddp



Series D*1FB

A

Return to SECTION

TOC

Return to ALPHA TOC


Pilot Flow Pilot Oil Inlet (Supply) and Outlet (Drain)

D31FBB/E D31FBR

D41FBB/E D41FBR D41FBZ




D_1FB.indd, ddp


A


TOC

Return to ALPHA TOC

D41FB


D31FB

BK320 2x M6x55 13.2 Nm (9.7 lb.-ft.) Nitrile: SK-D41FB 4x M10x60 63 Nm (46.5 lb.-ft.) Fluorocarbon: SK-D41FBV DIN 912 12.9 15 % BK160 4x 3/8-16x2.5 2x 1/4-20x2.5

SealSurface Finish


Surface Finish Seal

Dimensions


D_1FB.indd, ddp



A


TOC

Return to ALPHA TOC

Inch equivalents for millimeter dimensions are shown in (**)D91FB

BK360 6x M12x75 108 Nm (79.7 lb.-ft.) Nitrile: SK-D91FB DIN 912 12.9 15 % Fluorocarbon: SK-D91FBV BK228 6x 1/2-13x3.0

Surface Finish Seal

Dimensions


D_1FB.indd, ddp


A


TOC

Return to ALPHA TOC

Dimensions

Dimension with DT04-2P "Deutsch" Connector

Inch equivalents for millimeter dimensions are shown in (**)D111FB


Surface Finish Seal

59.0(2.32)

A B

Position control onlyfor B/E*/Rspool code

403.0(15.87)

421.0(16.57)

325.0(12.80)

Only spoolcode Z*

198.0(7.80)

348.0 (13.70)323.0 (12.72) (Hybrid)


D_1FB.indd, ddp



A


TOC

Return to ALPHA TOC

Dimensions

D41FB OBE


D31FB OBE

BK320 2x M6x55 13.2 Nm (9.7 lb.-ft.) Nitrile: SK-D41FB 4x M10x60 63 Nm (46.5 lb.-ft.) Fluorocarbon: SK-D41FBV DIN 912 12.9 15 % BK160 4x 3/8-16x2.5 2x 1/4-20x2.5

Surface Finish Seal


Surface Finish Seal


D_1FB.indd, ddp


A


TOC

Return to ALPHA TOC


D111FB OBE


D91FB OBE


Surface Finish Seal


Surface Finish Seal

Only spoolcode Z*

59.0(2.32)

Monitor switch(not for D111FBZ*)

A B

379.0 (14.92)354.0 (13.94) (Hybrid)

198.0 (7.80) 325.0 (12.80)421.0 (16.57)

403.0 (15.87)


D_FB with CANopen.indd, ddp



Series D*FB with CANopen

A

Return to SECTION

TOC

Return to ALPHA TOC


D3FB*C*0Spool/Sleeve Design

D3FB*C*3Spool/Body Design

D3FB*C

D*FB*KD*FB*E

D*FB*C

D1FB*C*0Spool/Sleeve Design

Parametrizing connection

M12 male connection

M12 female connectionBaud rate switch

Node ID switch

Supply voltage connection

General DescriptionSeries D1FB (NG6) and D3FB (NG10) proportional directional valves with CANopen interface are based on the series for standard digital electronics of the same name.

CANopen-ProfileCANopen Application Layer and Communication Layer CiA DS - 301 Version 4.01CANopen Layer Setting Services (LSS) and Protocols CiA DS 305 Version 2.0Device Profile in accordance with CiA DSP 408 Version 1.5.2The baud rate and node ID can be set by dip switches or Layer Setting Service (LSS). The valve parameters are factory set. Additionally the ProPxD software permits the editing of all parameters via the separate communication port. The software is also used for the valves with digital onboard electronics and the electronics modules. The cable for connection to a serial RS-232 interface is available as accessory.The digital onboard electronics is situated in a robust metal housing and can be used in rough environments.The series D1FB and D3FB are available with spool/sleeve design as well as with spool/body design.

Features CANopen interface. Spool/sleeve design and spool/body design. High repeatability from valve to valve. Low hysteresis. Manual override. Failsafe center position.




A

Series D1FB with CANopenReturn to SECTION

TOC

Return to ALPHA TOC



Valves Size Flow

ControlStyle Seal Options

B


F 0Spool Design

1

Code Description


3 Spool/body design

Code Description


Design SeriesNOTE:






E01HE01FE01C

20 (5.3)12 (3.2)6 (1.6)

E02HE02FE02C

20 (5.3)12 (3.2)6 (1.6)

E03HE03FE03C

20 (5.3)12 (3.2)6 (1.6)

B31HB31F

QB = QA /2 20/10 (5.3/2.6) 12/6 (3.2/1.6)

B32HB32F

QB = QA /2 20/10 (5.3/2.6) 12/6 (3.2/1.6)




E01KE01HE01F

30 (7.9)20 (5.3)10 (2.6)

E02KE02HE02F

30 (7.9)20 (5.3)10 (2.6)

Code Style

C

E

K


Repeatability

Bolt Kit:BK209 (4) 10-24x1.25 SHCS BK375 4x M5x30


UCommunication

Interface CANopen

DSP 408, 6 + PE, 1xM12 Male

1xM12 Female

0





A


TOC

Return to ALPHA TOC





E01ME01S

40 (10.6)60 (15.9)

E02ME02S

40 (10.6)60 (15.9)

B31MB31S

QB = QA /2 40 / 20 (10.6 / 5.3)60 / 30 (15.9 / 7.9)

B32MB32S

QB = QA /2 40 / 20 (10.6 / 5.3)60 / 30 (15.9 / 7.9)




E01ME01SE01U

40 (10.6)60 (15.9) 80 (21.2)

E02ME02SE02U

40 (10.6)60 (15.9)80 (21.2)

Design SeriesNOTE:



Valves Size Flow

ControlStyle Seal

B 0



F 0Spool Options Design

3

Code Description


3 Spool/body design


Code Description



Repeatability

Bolt Kit:BK98 (4) 1/4-20x1.625 SHCS BK385 4x M6x40

UCommunication

Interface CANopen

DSP 408, 6 + PE, 1xM12 Male

1xM12 Female

Code Style

C

E

K




A

Series D*FB with CANopenReturn to SECTION

TOC

Return to ALPHA TOC

Specifications

GeneralDesign Direct operated proportional DC valveActuation Proportional solenoidSize NG6 / CETOP 3 / NFPA D03 NG10 / CETOP 5 / NFPA D05Mounting Interface DIN 24340 / ISO 4401 / CETOP RP121 / NFPAMounting Position UnrestrictedAmbient Temperature [C] -20...+60 (-4F...+140F)MTTFD Value (OBE) [years] 75Vibration Resistance [g] 10 Sinus 5...2000 Hz acc. IEC 68-2-6

30 Random noise 20...2000 Hz acc. IEC 68-2-36 15 Shock acc. IEC 68-2-27

HydraulicMaximum Operating Pressure Ports P, A, B 350 Bar (5075 PSI); Port T 210 Bar (3045 PSI)Maximum Pressure Drop PABT / PBAT 350 Bar (5075 PSI)Fluid Hydraulic oil as per DIN 51524...51535, other on requestFluid Temperature [C] -20...+60 (-4F...+140F)Viscosity Permitted [cSt] Recommended [cSt]

/ [mm2/s]/ [mm2/s] 20...380 (93...1761 SSU) 30...80 (139...371 SSU)

Filtration ISO 4406 (1999) 18/16/13 (acc. NAS 1638: 7)Nominal Flow at p=5 Bar (72.5 PSI) per Control Edge *

D1FB*0 D1FB*3 D3FB*0/36 LPM (1.6 GPM) / 12 LPM (3.2 GPM) / 20 LPM (5.3 GPM)

10 LPM (2.6 GPM) / 20 LPM (5.3 GPM) / 30 LPM (7.9 GPM)

40 LPM (10.6 GPM) / 60 LPM (15.9 GPM) / 80 LPM (21.2 GPM)

Leakage at 100 Bar (1450 PSI) [ml/min]






A

Return to SECTION

TOC

Return to ALPHA TOC

Specifications

CANopenProfiles Communication Layer CIA DS - 301 Version 4

Device Profile in accordance with CIA DS - 408 Version 1.5.2 Layer Setting Service CIA DS - 305 Version 2

Functionality CANopen slave One PDO (Receive) One PDO (Transmit) One SDO (not useable for valve parameterizing) Emergency object Sync object Node guarding Life guarding Heartbeat time (producer/consumer) Minimum boot - up Node - ID - adjustment by DIP switch and LSS Baud Rate - adjustment by DIP switch and LSS

ParameterizationInterface RS-232, parametrizing cable order code 40982923Interface Program ProPxD (see www.parker.com/euro_hcd)Adjustment Ranges

Minimum [%] 0...50Maximum [%] 50...100

Ramp [s] 0...32.5




A


TOC

Return to ALPHA TOC

Performance Curves

D1FB*0 Flow100

75

50

25

P-BA-T


P-AB-T

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)


A-T

P-B

Spool Type B31/32

P-A

100

75

50

25

%

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)

B-T



Flow LimitAt 25%, 50%, 75% and 100% command signal (symmetric flow). At asymmetric flow a reduced flow limit has to be considered typically approx. 10% lower.


Flo

w Q

0

40

350

30

20

10

30025020015010050

40

30

20

10

10.6

7.9

5.3

2.6

Flow

(Q)

0

GPM LPM

0 50725

1001450

1502175

2002900

2503625

3505075

Pressure Drop P PT

BarPSI

3004350

A

P T

B

100%

75%

25%

50%

Spool Type E01H





A


TOC

Return to ALPHA TOC

Performance Curves

D1FB*3 Flow

Flow LimitAt 25%, 50%, 75% and 100% command signal (symmetric flow). At asymmetric flow a reduced flow limit has to be considered typically approx. 10% lower.



0

40

350

30

20

10

30025020015010050

70

30

20

10

18.5

7.9

5.3

2.6

Flow

(Q)

0

GPM LPM

0 50725

1001450

1502175

2002900

2503625

3505075

Pressure Drop P PT

BarPSI

3004350

A

P T

B

100%

75%

25%50%

4010.6

406015.9

405013.2

Spool Type E01K

100

75

50

25

P-BA-T

Spool Type E01/02

P-AB-T

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)





A

Series D3FB with CANopen


Return to SECTION

TOC

Return to ALPHA TOC

Performance Curves

Flow Limit 100% command signal (symmetric flow). At asymmetric flow a reduced flow limit has to be considered typically approx. 10% lower.

100

75

50

25

P-BA-T

Spool Type E*

P-AB-T

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)


A-T

P-B

Spool Type B*

B-T

100

75

50

25

%

100 -80 -60 -40 -20 20 40 60 80 1000

Flow

(Q) %

of N

omina

l Flow

Input Signal (%)

P-A


A

P T

B

0 801160

1201740

40580

1602320

2002900

240 2803480 4060

Pressure Drop P

BarPSI

250

200

150

100

66.1

52.9

39.7

26.5Flow

(Q)

0

GPM LPM

5013.2

Spool Type E01S

0 801160

1201740

40580

1602320

2002900

240 2803480 4060

Pressure Drop P

BarPSI

250

200

150

100

66.1

52.9

39.7

26.5Flow

(Q)

0

GPM LPM

5013.2

A

P T

BSpool Type E01U


D3FB*0 D3FB*3

D3FB Flow






ASupply Voltage Connection 6 + PE

A Supply voltage 18...30VB Supply voltage 0VC hCD hCE hCF hCG PE

CANopen ConnectionCAN in: M12, 5 pole male terminals. Pin 1: CAN_SHLDPin 2: ncPin 3: CAN_GNDPin 4: CAN_HPin 5: CAN_L

Shield is CAN_GND.

CAN out: M12, 5 pole female terminals. Pin 1: CAN_SHLDPin 2: ncPin 3: CAN_GNDPin 4: CAN_HPin 5: CAN_L

Shield is CAN_GND.

Return to SECTION

TOC

Return to ALPHA TOC

Wiring Connections





A

Return to SECTION

TOC

Return to ALPHA TOC


NodeID Adjustment with DIP Switches

Baud Rate Adjustment with DIP Switches

Node-IDDIP Switch Setting

1 2 3 4 5 6

0 LSS -Priority OFF OFF OFF OFF OFF OFF1 ON OFF OFF OFF OFF OFF2 OFF ON OFF OFF OFF OFF3 ON ON OFF OFF OFF OFF

61 ON OFF ON ON ON ON62 OFF ON ON ON ON ON63 ON ON ON ON ON ON

1 2 3 4 5 6

Value

Baud RateDIP Switch Setting

1 2 3 4

0 LSS -Priority OFF OFF OFF

Valve Parameterization and Diagnostics

ON/OFF

10 kBit/s ON OFF OFF20 kBit/s OFF ON OFF50 kBit/s ON ON OFF125 kBit/s OFF OFF ON250 kBit/s ON OFF ON500 kBit/s OFF ON ON1 MBit/s ON ON ON






A






Return to SECTION

TOC

Return to ALPHA TOC





A


TOC

Return to ALPHA TOC

Inch equivalents for millimeter dimens

Cat HY14-2550 Electrohydraulics Parker

Documents

Transcript of Cat HY14-2550 Electrohydraulics Parker