CAT C15 SPECIFICATIONS.pdf

8/11/2019 CAT C15 SPECIFICATIONS.pdf

1/30

C15 ACERT 403 bkW / 540 bhp

2100 rpm

Industrial

Image shown may not reflectactual engine

CATERPILLAR ENGINE

SPECIFICATIONSI-6, 4-Stroke-Cycle Diesel

Bore......................................................... 137.2 mm (5.4 in)Stroke.................................................... 171.4 mm (6.75 in)Displacement..........................................15.2 L (927.56 in3)Aspiration................................... Turbocharged AftercooledCompression Ratio....................................................... 18:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb)........ 1332 kg, 2937 lb

FEATURES

Emissions

Meets Tier 3, Stage IIIA emission requirements. Tier 3refers to EPA (U.S.) standards. Stage IIIA refers toEuropean standards.

Worldwide Supplier Capability

Caterpillar- Casts engine blocks, heads, cylinder liners, and

flywheel housings- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable product.

Testing

Prototype testing on every model:- proves computer design- verifies system torsional stability- functionality tests every model

Every Caterpillar engine is dynamometer tested under

full load to ensure proper engine performance.

Full Range of Attachments

Wide range of bolt-on system expansion attachments,factory designed and tested.

Unmatched Product Support Offered ThroughWorldwide Caterpillar Dealer Network

More than 1,800 dealer outletsCaterpillar factory-trained dealer technicians service

every aspect of your industrial engine99.7% of parts orders filled within 24 hours worldwideCaterpillar parts and labor warrantyPreventive maintenance agreements available for repairbefore failure options

Scheduled Oil Sampling program matches your oilsample against Caterpillar set standards to determine:- internal engine component condition- presence of unwanted fluids- presence of combustion by-products

Web Site

For all your industrial power requirements, visitwww.cat-industrial.com.

7 August 2006 1:31 AM

La

dire

no

vli

La U

es vl

no p

ser

carga

Las

dir

wese

esc

no

co

htt

As

de

qu

est

us

Ads by PlusHD.5 Ad Options


2/30

C15 ACERT INDUSTRIAL ENGINE403 bkW (540 bhp)

STANDARD ENGINE EQUIPMENT

Air Inlet System

ATAACTurbocharged

Control System

Electronic governingPTO speed controlProgrammable ratingsCold mode start strategyAutomatic altitude compensationPower compensation for fuel temperatureProgrammable low and high idle and total engine limitElectronic diagnostics and fault loggingEngine monitoring systemJ1939 Broadcast (diagnostic and engine status)ADEM A4

Cooling System

Thermostats and housing, vertical outletJacket water pump, centrifugalWater pump, inlet

Exhaust System

Exhaust manifold, dryOptional exhaust outlet

Flywheels and Flywheel Housing

SAE No. 1 Flywheel housing

Fuel System

MEUI injectionFuel filter, secondary (2 micron high performance)Fuel transfer pumpFuel priming pumpACERT Technology

Lube System

Crankcase breatherOil coolerOil fillerOil filterOil pan front sumpOil dipstickOil pump (gear driven)

General

Paint, Caterpillar YellowVibration damperLifting eyes

2 7 August 2006 1:31 AM



3/30


PERFORMANCE CURVES

IND - C (Intermittent) - DM7520-00

TorqueNm

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW

Torque Nm BSFC g/kW-hr Fuel Rate L/hr

2100 403 1832 227.7 109.4

2000 403 1924 226.5 108.8

1900 403 2025 225 108.1

1800 403 2138 223.5 107.4

1700 398 2236 222 105.3

1600 390 2325 220.8 102.5

1500 378 2404 219.7 98.9

1400 362 2466 218.7 94.2

1300 331 2434 218.1 86.1

1200 268 2134 217.3 69.5

1100 242 2102 215.9 62.3

3 7 August 2006 1:31 AM



4/30


RATINGS AND CONDITIONS

IND - C (Intermittent)Intermittent service wheremaximum power and/or speed are cyclic (time at fullload not to exceed 50%).

Engine PerformanceDiesel Engines 7 liter andhigherAll rating conditions are based on SAE J1995, inlet airstandardconditions of 99 kPa (29.31 in. Hg) dry barometer and25C (77F)temperature. Performance measured using a standardfuel with fuelgravity of 35API having a lower heating value of42,780 kJ/kg(18,390 btu/lb) when used at 29C (84.2F) with adensity of 838.9 g/L.

Engine Dimensions

(1) Length 1381.0 mm

(2) Width 910.4 mm

(3) Height 1274.5 mm

Note: Do not use for installation design. Seegeneral dimension drawings for detail(Drawing # 2579952 ).

Performance Number: DM7520-00

Feature Code: C15DI12

Materials and specifications are subject to change without notice.

7657008

2006 Caterpillar

All rights reserved.

The International System of Units (SI) is used in this publication.

CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," aswell as corporate and product identity used herein, are trademarks of

Caterpillar and may not be used without permission.



5/30


2100 rpm

Industrial


CATERPILLAR ENGINE


Bore....................................................... 145.0 mm (5.71 in)Stroke...................................................... 183.0 mm (7.2 in)Displacement.......................................18.1 L (1,104.53 in3)Aspiration................................... Turbocharged AftercooledCompression Ratio.................................................... 16.3:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb).......1332 kg (2937 lb)

FEATURES


Caterpillar- Casts engine blocks, heads, cylinder liners, andflywheel housings- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enables

Caterpillar to produce high quality, dependable product.

Testing


Every Caterpillar engine is dynamometer tested underfull load to ensure proper engine performance.







Web Site


2 November 2006 3:13 AM



6/30



Air Inlet System

Turbocharged Aftercooled -- 429-470 bkW (575-630bhp)Twin Turbocharged Aftercooled -- 522-597 bkW(700-800 bhp)ATAAC

Control System

Electronic governingPTO speed controlProgrammable ratingsCold mode start strategyAutomatic altitude compensationPower compensation for fuel temperatureProgrammable low and high idle and total engine limit

Electronic diagnostics and fault loggingEngine monitoring systemJ1939 Broadcast (diagnostic and engine status)ADEM A4

Cooling System


Exhaust System




Fuel System


Lube System


General


2 2 November 2006 3:13 AM



7/30


PERFORMANCE CURVES


TorqueNm

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW


2100 470 2137 233.8 131.0

2000 470 2244 229.9 128.8

1900 470 2362 224.5 125.8

1800 470 2493 218.9 122.6

1700 465 2611 214.5 118.8

1600 455 2714 212.5 115.2

1500 441 2807 211.4 111.1

1400 422 2879 210.7 106.0

1300 387 2842 210.3 97.0

1200 309 2457 211.3 77.8

1100 258 2243 214.4 66.0

3 2 November 2006 3:13 AM



8/30





Engine Dimensions


(2) Width 920.7 mm






8678268

2006 Caterpillar



CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," and thePOWER EDGE trade dress, as well as corporate and product identityused herein, are trademarks of Caterpillar and may not be used without

permission.



9/30


2100 rpm

Industrial


CATERPILLAR ENGINE


Bore....................................................... 145.0 mm (5.71 in)Stroke...................................................... 183.0 mm (7.2 in)Displacement.......................................18.1 L (1,104.53 in3)Aspiration................................... Turbocharged AftercooledCompression Ratio.................................................... 16.3:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb).......1332 kg (2937 lb)

FEATURES


Caterpillar- Casts engine blocks, heads, cylinder liners, andflywheel housings- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enables

Caterpillar to produce high quality, dependable product.

Testing









Web Site


17 August 2006 6:37 AM



10/30



Air Inlet System


Control System



Cooling System


Exhaust System




Fuel System


Lube System


General


2 17 August 2006 6:37 AM



11/30


PERFORMANCE CURVES


TorqueNm

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW


2100 522 2374 228.4 142.1

2000 522 2493 224.4 139.6

1900 522 2624 221.5 137.8

1800 522 2769 219 136.3

1700 516 2899 216.6 133.3

1600 505 3014 214.2 129.0

1500 490 3120 211.9 123.8

1400 469 3199 210.2 117.5

1300 430 3159 209.4 107.4

1000 296 2822 212.6 74.9

3 17 August 2006 6:37 AM



12/30





Engine Dimensions


(2) Width 974.0 mm






7657637

2006 Caterpillar







13/30


14/30



Air Inlet System


Control System



Cooling System


Exhaust System




Fuel System


Lube System


General


2 23 December 2005 2:45 AM



15/30


PERFORMANCE CURVES

IND - B - DM8169-00

TorqueNm

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW


2100 448 2035 225.3 120.2

2000 448 2137 223.5 119.2

1900 448 2249 219.3 117.0

1800 448 2374 214.7 114.5

1700 443 2486 211.4 111.5

1600 433 2584 211.5 109.2

1500 420 2673 212.5 106.4

1400 402 2742 212.9 102.0

1300 368 2706 211.1 92.7

1200 294 2340 209.1 73.3

1100 246 2136 208.1 61.0

3 23 December 2005 2:45 AM



16/30



IND - BFor service where power and/or speed arecyclic (time at full load not to exceed 80%).


Engine Dimensions

(1) Length

(2) Width

(3) Height

See page1-Specificationsfor Dimensions

Note: Do not use for installation design. Seegeneral dimension drawings for detail(Drawing # null ).




5959430

2005 Caterpillar







17/30


2100 rpm

Engine


CATERPILLAR ENGINE

SPECIFICATIONSVee 12 Cylinder, 4-Stroke-Cycle Diesel

Bore......................................................... 137.2 mm (5.4 in)Stroke...................................................... 152.4 mm (6.0 in)Displacement..................................... 27.03 L (1,649.47 in3)Aspiration................................... Turbocharged AftercooledCompression Ratio.................................................... 16.5:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb).......2946 kg (6495 lb)

FEATURES

Emissions

Meets Tier 2 emissions requirements. Tier 2 refers toEPA (U.S) standards.


Caterpillar

- Casts engine blocks, heads, cylinder liners, andflywheel housings- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable product.

Testing






More than 1,800 dealer outletsCaterpillar factory-trained dealer technicians serviceevery aspect of your industrial engine99.7% of parts orders filled within 24 hours worldwideCaterpillar parts and labor warrantyPreventive maintenance agreements available for repairbefore failure options


Web Site


20 March 2007 5:09 AM



18/30

C27 ACERT Engine653 bkW (875 bhp)


Air Inlet System

Turbocharged Air to Air Aftercooled

Control System


Cooling System


Exhaust System




Fuel System


Lube System


General


2 20 March 2007 5:09 AM



19/30


PERFORMANCE CURVES

IND - B - DM9038-00

TorqueNm

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW


2100 653 2968 206.6 160.8

2000 653 3117 202.9 157.8

1900 653 3281 200.3 155.8

1800 653 3463 198.3 154.3

1700 646 3628 197.7 152.2

1600 632 3771 197.9 149.1

1500 613 3900 199.9 146.0

1400 586 4000 201.8 141.1

1300 538 3949 202.6 129.8

3 20 March 2007 5:09 AM



20/30



IND - BFor service where power and/or speed arecyclic (time at full load not to exceed 80%).


Engine Dimensions


(2) Width 1464.3 mm




Feature Code: C27DI01 Arr. Number: 2520148


9607603

2007 Caterpillar



CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," and thePOWER EDGE trade dress, as well as corporate and product identity

used herein, are trademarks of Caterpillar and may not be used withoutpermission.



21/30


2100 rpm

Industrial


CATERPILLAR ENGINE

SPECIFICATIONSVee 12 Cylinder, 4-Stroke-Cycle Diesel

Bore......................................................145.0 mm (5.71 in)Stroke...................................................162.0 mm (6.38 in)Displacem ent..................................... 32.1 L (1,958.86 in 3)Aspiration...............................Turbocharged AftercooledCompression Ratio...................................................16.5:1Rotation (from flyw heel end).............. CounterclockwiseWeight, Net Dry (approximate kg. lb).. 2946 kg (6495 lb)

FEATURES

Emissions

Meets Tier 2 emissions requirements. Tier 2 refersto EPA (U.S) standards.


Caterpillar- Casts engine blocks, heads, cylinder liners, andflywheel housings

- Machines critical components- Assembles complete engine- Factory-designed systems bu ilt at Caterpil lar ISO9001:2000 certi fied facilitiesOwnership of these manufacturing processesenables Caterpillar to produce high quality,dependable product.

Testing

Prototype testing on every m odel:- proves computer design- verifies system torsional stability- functionality tests every model

Every Caterpil lar engine is dynamom eter tested

under full load to ensure proper engineperformance.

Full Range of Att achments

Wide range of bolt-on system expansionattachments, factory designed and tested.

Unmatched Product Support Offered ThroughWorldw ide Caterpillar Dealer Netw ork


every aspect of your industrial engine99.7% of parts orders filled within 24 hoursworldwideCaterpillar parts and labor warrantyPreventive maintenance agreements available forrepair before failure options

Scheduled Oil Sampl ing program m atches your oilsample against Caterpillar set standards todetermine:- internal engine component condition- presence of unwanted fluids- presence of combustion by-products

Web Site


14 November 2008 4:40 AM



22/30



Air Inlet System

Turbocharged Air to Air Af tercooled

Cont rol System

Electronic governingPTO speed controlProgramm able ratingsCold m ode start strategyAutom atic altitude compensationPower compensation for fuel t emperatureProgramm able low and high idle and total enginelimitElectronic diagnostics and fault loggingEngine m onitoring systemJ1939 Broadcast (diagnostic and engine status)ADEM A4

Cooling System

Thermostats and housing, vertical outletJacket water pump, centrifugalWater pum p, inlet

Exhaust Syst em

Exhaust manifold , dryOptional exhaust outlet

Flyw heels and Flyw heel Housing

SAE No. 1 Flyw heel housing

Fuel System


Lube System

Crankcase breatherOil coolerOil fillerOil filterOil pan front sumpOil dipstickOil pum p (gear driven)

General

Paint, Caterpil lar YellowVibration damperLifting eyes

2 14 November 2008 4:40 AM



23/30


PERFORMANCE CURVES

IND - B - DM9030-00

TorqueNm

EnginePow er kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine Pow erkW

Torque Nm BSFC g/ kW-hr Fuel Rate L/hr

3 14 November 2008 4:40 AM



24/30


PERFORMANCE CURVES

IND - B - DM9030-00

EngineTorque

lbft

EnginePow er bhp

BSFClb/bhp-hr

Engine Speed rpm

English

Engine Speedrpm

Engine Pow erbhp

Engine Torquelbft

BSFC lb/bhp-hr Fuel Rategal/hr

4 14 November 2008 4:40 AM



25/30



IND - B For service where pow er and/or speed arecyclic (time at ful l load not to exceed 80%).

Engine Perform ance Diesel Engines 7 liter andhigherAll rating conditions are based on SAE J1995, inletair standardcondi tions of 99 kPa (29.31 in. Hg) dry barom eterand 25C (77F)temperature. Perform ance measured using astandard fuel w ith fuelgravit y of 35 API having a lower heating value of42,780 kJ/kg(18,390 btu/lb ) when used at 29 C (84.2 F) with adensity of 838.9 g/L.

Engine Dimensions

(1) Length 1915.3 m m (75.41 in)

(2) Width 1478.7 mm (58.22 in)

(3) Height 1319.2 m m (51.94 in)

Note: Do not use for installation design.See general dimension draw ings fordetail (Drawing # 2833535 ).


Feature Code: C32DI01 Arr . Num ber: 2638150


13457541

2008 Caterpi ll ar

All rig hts reserved.


CAT, CATERPILLAR, SAFETY.CAT.COM their respect ive log os,"Caterpillar Yellow," and the POWER EDGE trade d ress, as well as

corporate and produ ct identity used herein, are trademarks ofCaterpillar and may not b e used w ithout p ermission.



26/30


2100 rpm

Industrial


CATERPILLAR ENGINE


Bore....................................................... 145.0 mm (5.71 in)Stroke.................................................... 162.0 mm (6.38 in)Displacement.......................................32.1 L (1,958.86 in3)Aspiration................................... Turbocharged AftercooledCompression Ratio.................................................... 16.5:1Rotation (from flywheel end)....................CounterclockwiseWeight, Net Dry (approximate kg. lb).......2946 kg (6495 lb)

FEATURES

Emissions

Meets Tier 2 emissions requirements. Tier 2 refers toEPA (U.S) standards.


Caterpillar- Casts engine blocks, heads, cylinder liners, andflywheel housings

- Machines critical components- Assembles complete engine- Factory-designed systems built at Caterpillar ISO9001:2000 certified facilitiesOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable product.

Testing









Web Site


11 March 2008 2:27 AM



27/30



Air Inlet System

Turbocharged Air to Air Aftercooled

Control System


Cooling System


Exhaust System




Fuel System


Lube System


General


2 11 March 2008 2:27 AM



28/30


PERFORMANCE CURVES


Torque N m

EnginePower kW

BSFCg/kW-hr

Engine Speed - rpm

Metric

Engine Speedrpm

Engine PowerkW

Torque N m BSFC g/kW-hr Fuel Rate L/hr

2100 839 3815 214.7 214.7

2000 839 4006 210.6 210.6

1900 839 4217 209.7 209.8

1800 839 4451 207 207.0

1700 830 4662 204.7 202.6

1600 812 4846 203.6 197.1

1500 787 5010 203.1 190.5

1400 754 5143 202.4 181.9

1300 691 5076 202.2 166.6

1200 599 4764 204.6 146.0

1100 512 4448 205.8 125.7

3 11 March 2008 2:27 AM



29/30




Engine PerformanceDiesel Engines 7 liter and higherAll rating conditions are based on SAE J1995, inlet airstandardconditions of 99 kPa (29.31 in. Hg) dry barometer and25C (77F)temperature. Performance measured using a standardfuel with fuelgravity of 35API having a lower heating value of42,780 kJ/kg(18,390 btu/lb) when used at 29C (84.2F) with adensity of 838.9 g/L.

Engine Dimensions


(2) Width 1478.7 mm




Feature Code: C32DI02 Arr. Number: 2638150


11699832

2008 Caterpillar



CAT, CATERPILLAR, SAFETY.CAT.COM their respective logos,"Caterpillar Yellow," and the POWER EDGE trade dress, as well as

corporate and product identity used herein, are trademarks of Caterpillarand may not be used without permission.



30/30



CAT C15 SPECIFICATIONS.pdf

Documents

Transcript of CAT C15 SPECIFICATIONS.pdf