Cat 6 RJ45 Assembly
1
Spacer Guide Body Assembly Guide for Cat 6 RJ45 Connectors 1. 3. 4. 5. 6. 7. 8. 2. 1. Strip back the outer sleeve. 2. Use the spacer to arrange the twisted pairs as shown. 3. Separate the cores and insert into the cable guide in the correct sequence*. 4. Push the spacer and guide together tightly and trim the excess wire flush with the end of the guide. 5. Insert the complete assembly into the body of the plug, making sure the guide is pushed fully in so that the cores lie under the metal pins. 6. Using a crimp tool, squeeze the handle to push the pins home. Release the pressure and then squeeze again to lock the cable grip properly. 7. Finished! 8. The completed, crimped plug. * See the Maplin Network Wiring PDF
-
Upload
mick-mannion -
Category
Documents
-
view
67 -
download
2
Transcript of Cat 6 RJ45 Assembly
Spacer Guide Body
Assembly Guide for Cat 6 RJ45 Connectors
1.
3.
4.
5.
6. 7. 8.
2.
1. Strip back the outer sleeve.
2. Use the spacer to arrange the
twisted pairs as shown.
3. Separate the cores and insert into
the cable guide in the correct
sequence*.
4. Push the spacer and guide together
tightly and trim the excess wire
flush with the end of the guide.
5. Insert the complete assembly into
the body of the plug, making sure
the guide is pushed fully in so that
the cores lie under the metal pins.
6. Using a crimp tool, squeeze the
handle to push the pins home.
Release the pressure and then
squeeze again to lock the cable
grip properly.
7. Finished!
8. The completed, crimped plug.
* See the Maplin Network Wiring PDF