CAST IRON FITTINGS Including Weights & Packaging · CAST IRON FITTINGS - Including Weights &...

16
Price Sheet PF.CI-5.11 | Effective: May 16, 2011 | Cancels Price Sheet PF-C.I. 10.10 of October 4, 2010 CAST IRON FITTINGS - Including Weights & Packaging FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERAL UPC numbers and SPIN commodity identification numbers are available upon request. To obtain current ISO certifications, listings, and other approvals, visit Anvil’s Web site at www.anvilintl.com. Pricing is subject to change without notice. Go to Anvil’s Web site for the most current list price information, or contact your local Anvil representative. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods. PRICE SHEET APPLIES TO: Cast Iron Screwed - Drainage, Flanged Fittings and Flanges Floor and Ceiling Plates Safety Valve Discharge Elbows FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM www.anvilintl.com NORTHERN REGION CUSTOMER SERVICE CENTER 800-301-2701 SOUTHERN REGION CUSTOMER SERVICE CENTER 800-451-4414

Transcript of CAST IRON FITTINGS Including Weights & Packaging · CAST IRON FITTINGS - Including Weights &...

Price Sheet PF.CI-5.11 | Effective: May 16, 2011 | Cancels Price Sheet PF-C.I. 10.10 of October 4, 2010 CAST IRON FITTINGS - Including Weights & Packaging

FREIGHT ALLOWANCE:All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed.

NOTE:All orders are accepted on the basis of prices in effect at the time of shipment.

NOTICE:To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute.

GENERAL • Upc numbers and SpIN commodity identification numbers are available upon request. • To obtain current ISO certifications, listings, and other approvals, visit Anvil’s Web site at

www.anvilintl.com.• pricing is subject to change without notice. Go to Anvil’s Web site for the most current list

price information, or contact your local Anvil representative.

LOSS OR DAMAGE CLAIMS:All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods.

PRICE SHEET APPLIES TO:Cast Iron Screwed - Drainage, FlangedFittings and FlangesFloor and Ceiling PlatesSafety Valve Discharge Elbows

FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM

www.anvilintl.com

NortherN regioN CUStoMer SerViCe CeNter

800 -301-2701

SoUtherN regioN CUStoMer SerViCe CeNter

800 -451-4414

www.anvilintl.com Revised: 2

CAST IRON FITTINGS Price ListEffective Date: May 16, 2011 | Replaces Prior Date: October 2010 | Sheet # PF.CI-5.11

1. CONTROLLING PROVISIONS:These terms and conditions shall control with respect to any purchase order or sale of Seller’s products. No waiver, alteration or modification of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller.

2. DELIVERY:Seller will make every effort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.

3. WARRANTY:Seller warrants for one year from the date of shipment Seller’s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer’s acceptance of Seller’s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller’s product warranty. THIS IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXpRESSED OR IMpLIED AND ALL IMpLIED WARRANTIES OF MERcHANTABILITY AND FOR A pARTIcULAR pURpOSE WHIcH EXcEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DIScLAIMED BY SELLER AND EXcLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller’s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.

4. SELLER’S LIABILITY:Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.

5. RETURNS:Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) All material returned must, on its arrival at Seller’s plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty percent (20%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda.

6. SHIPMENTS:All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment.

claims for products damaged or lost in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.

7. SPECIAL PRODUCTS:Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application.

8. PRICES AND DESIGNS:prices and designs are subject to change without notice. All prices are F.O.B. point of shipment, unless otherwise stated.

9. TAXES:The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities.

10. NUCLEAR PLANTS:Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers’ (ANI) pool and under the Mutual Atomic Energy Reinsurance pool (MAERp) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (for death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Seller (or which could be so covered but with respect to which Buyer has elected to self-insure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence.

11. MINIMUM INVOICE:Domestic: $100 plus transportation. International: $500 plus transportation.

12. TERMS:cash, net 30 days unless otherwise specified.

NOTE: All orders are accepted on the basis of prices in effect at the time of shipment.

NOTIcE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute.

FREIGHT ALLOWANcE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. Shipments (weighing less than 2,500 pounds) will be shipped prepaid. The buyer will be invoiced for freight costs at the applicable published class, exception or commodity rate(s) or charge(s). Anvil reserves the right to select the carrier for all shipments.

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

CAST IRON FITTINGS Price ListEffective Date: May 16, 2011 | Replaces Prior Date: October 2010 | Sheet # PF.CI-5.11

www.anvilintl.comRevised: 3

Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv

45° Reducing Elbow Fig. 356R

Tee Fig. 358

22¹/₂° Elbow Fig. 356A

90° Elbow, Reducing Fig. 352

45° Elbow Fig. 356

90° Elbow, Flange & Screw Fig. 371

90° Elbow Fig. 3511⁄4 $11.91 - 80 16.003⁄8 $17.23 - 40 25.001⁄2 $7.55 - 150 40.003⁄4 BLK $7.87 - 100 60.001 BLK $9.31 - 45 92.0011⁄4 BLK $13.22 - 25 155.0011⁄2 BLK $18.28 - 15 195.002 BLK $28.57 - 20 313.0021⁄2 $68.45 - BULK 494.003 $112.09 - BULK 721.0031⁄2 $304.46 - BULK 967.004 $207.82 - BULK 1217.005 $455.28 - BULK 2146.006 $589.97 - BULK 3133.008 $1,442.66 - BULK 6456.00

21⁄2 $543.74 - BULK 1022.003 $663.42 - BULK 1325.004 $771.29 - BULK 2156.006 $1,713.91 - BULK 4050.00

1⁄4 $14.68 - BULK 16.003⁄8 $15.77 - BULK 23.001⁄2 $11.55 - 150 37.003⁄4 $11.62 - 100 55.001 $13.62 - 60 83.0011⁄4 $18.32 - 35 133.0011⁄2 $30.36 - 25 179.002 $35.02 - 20 289.0021⁄2 $91.07 - 10 429.003 $144.24 - BULK 644.0031⁄2 $329.04 - BULK 842.004 $299.87 - BULK 1064.006 $867.81 - BULK 2602.008 $1,735.86 - BULK 5017.00

3⁄4 $63.00 - BULK 52.001 $64.28 - BULK 80.0011⁄4 $97.88 - BULK 140.0011⁄2 $131.23 - BULK 164.002 $169.30 - BULK 250.0021⁄2 $231.65 - BULK 395.00

¹⁄₂ x ³⁄₈ $23.98 - BULK 34.00¹⁄₂ x ¹⁄₄ $18.60 - BULK 40.00³⁄₄ x ¹⁄₂ $15.87 - 120 51.001 x ³⁄₄ BLK $13.25 - 70 76.001 x ¹⁄₂ BLK $11.76 - 70 67.001¹⁄₄ x 1 BLK $16.68 - 40 121.001¹⁄₄ x ³⁄₄ $19.02 - 50 102.001¹⁄₄ x ¹⁄₂ $18.71 - 55 107.001¹⁄₂ x 1¹⁄₄ $33.69 - 25 174.001¹⁄₂ x 1 BLK $30.79 - 30 144.001¹⁄₂ x ³⁄₄ $30.79 - BULK 155.001¹⁄₂ x ¹⁄₂ $33.04 - BULK 153.002 x 1¹⁄₂ $45.08 - 25 259.002 x 1¹⁄₄ $48.20 - 25 233.002 x 1 $45.08 - 15 208.002 x ³⁄₄ $45.08 - 15 220.002 x ¹⁄₂ $51.36 - 15 222.002¹⁄₂ x 2 $91.04 - BULK 401.002¹⁄₂ x 1¹⁄₂ $102.66 - BULK 368.002¹⁄₂ x 1¹⁄₄ $105.13 - BULK 341.002¹⁄₂ x 1 $105.13 - BULK 293.003 x 2¹⁄₂ $171.87 - BULK 644.003 x 2 $158.33 - BULK 525.003 x 1¹⁄₂ $171.87 - BULK 565.003 x 1¹⁄₄ $171.87 - BULK 598.004 x 3 $293.25 - BULK 1063.004 x 2¹⁄₂ $293.25 - BULK 1127.004 x 2 $293.25 - BULK 1189.005 x 4 $674.88 - BULK 1647.006 x 5 $893.68 - BULK 2666.006 x 4 $893.68 - BULK 2353.006 x 3 $893.68 - BULK 1943.00

1 x ¹⁄₂ $22.99 $41.77 BULK 95.00

1⁄4 $18.62 - BULK 22.003⁄8 $18.10 - BULK 35.001⁄2 $11.76 - 100 56.003⁄4 $13.73 - 60 84.001 BLK $12.20 - 30 125.0011⁄4 BLK $22.28 - 20 203.0011⁄2 $28.95 - 20 270.002 BLK $40.32 - 10 423.0021⁄2 $104.75 - BULK 667.003 $160.75 - BULK 1000.0031⁄2 $324.22 - BULK 1329.004 $313.56 - BULK 1633.005 $857.58 - BULK 2733.006 $973.61 - BULK 4085.008 $2,201.08 - BULK 7900.00

STANDARD SCREWED CAST IRON FITTINGS STANDARD SCREWED CAST IRON FITTINGS

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

www.anvilintl.com Revised: 4

CAST IRON FITTINGS Price ListEffective Date: May 16, 2011 | Replaces Prior Date: October 2010 | Sheet # PF.CI-5.11

STANDARD SCREWED CAST IRON FITTINGS STANDARD SCREWED CAST IRON FITTINGSTee Reducing Fig. 359 (Continued)Tee Reducing Fig. 359

¹⁄₂ x ¹⁄₂ x ¹⁄₄ $29.02 - BULK 57.00¹⁄₂ x ¹⁄₂ x ³⁄₈ $24.45 - BULK 57.00¹⁄₂ x ¹⁄₂ x ³⁄₄ $22.13 - BULK 68.00¹⁄₂ x ¹⁄₂ x 1 $26.20 - BULK 100.00³⁄₄ x ¹⁄₄ x ³⁄₄ $32.45 - BULK 79.00³⁄₄ x ¹⁄₂ x ¹⁄₂ $22.13 - BULK 64.00³⁄₄ x ¹⁄₂ x ³⁄₄ $22.13 - BULK 75.00³⁄₄ x ³⁄₄ x ¹⁄₄ $25.19 - BULK 62.00³⁄₄ x ³⁄₄ x ³⁄₈ $22.71 - BULK 75.00³⁄₄ x ³⁄₄ x ¹⁄₂ $19.07 - 70 76.00³⁄₄ x ³⁄₄ x 1 $22.39 - BULK 99.001 x ¹⁄₄ x 1 $28.63 - BULK 108.001 x ¹⁄₂ x ¹⁄₂ $27.48 - BULK 90.001 x ¹⁄₂ x ³⁄₄ $25.05 - BULK 91.001 x ¹⁄₂ x 1 $18.14 - 45 108.001 x ³⁄₄ x ¹⁄₂ $25.05 - BULK 89.001 x ³⁄₄ x ³⁄₄ $22.99 - 50 100.001 x ³⁄₄ x 1 $18.42 - 45 113.001 x 1 x ¹⁄₄ $28.38 - BULK 101.001 x 1 x ¹⁄₂ $13.75 - 50 101.001 x 1 x ³⁄₄ $16.52 - 45 111.001 x 1 x 1¹⁄₄ $26.40 - 20 149.001 x 1 x 1¹⁄₂ $43.72 - BULK 184.001 x 1 x 2 $83.46 - BULK 270.001¹⁄₄ x ¹⁄₂ x ¹⁄₂ $52.50 - BULK 100.001¹⁄₄ x ¹⁄₂ x 1 $39.94 - BULK 138.001¹⁄₄ x ¹⁄₂ x 1¹⁄₄ $34.03 - 25 164.001¹⁄₄ x ³⁄₄ x ³⁄₄ $39.77 - BULK 127.001¹⁄₄ x ³⁄₄ x 1 $39.77 - BULK 143.001¹⁄₄ x ³⁄₄ x 1¹⁄₄ $32.45 - 25 173.001¹⁄₄ x 1 x ¹⁄₂ $22.29 - 35 127.001¹⁄₄ x 1 x ³⁄₄ $25.21 - 30 136.001¹⁄₄ x 1 x 1 $22.01 - 20 153.001¹⁄₄ x 1 x 1¹⁄₄ $24.31 - 20 179.001¹⁄₄ x 1 x 1¹⁄₂ $40.82 - 25 207.001¹⁄₄ x 1 x 2 $77.65 - BULK 266.001¹⁄₄ x 1¹⁄₄ x ¹⁄₂ $21.98 - 30 147.001¹⁄₄ x 1¹⁄₄ x ³⁄₄ $23.89 - 25 157.001¹⁄₄ x 1¹⁄₄ x 1 $22.01 - 20 173.001¹⁄₄ x 1¹⁄₄ x 1¹⁄₂ $40.82 - 20 229.001¹⁄₄ x 1¹⁄₄ x 2 $65.20 - BULK 281.001¹⁄₂ x ¹⁄₂ x 1¹⁄₄ $51.72 - BULK 193.001¹⁄₂ x ¹⁄₂ x 1¹⁄₂ $45.52 - 20 214.001¹⁄₂ x ³⁄₄ x 1¹⁄₂ $44.45 - BULK 218.001¹⁄₂ x 1 x ¹⁄₂ $47.23 - BULK 175.001¹⁄₂ x 1 x ³⁄₄ $45.69 - 25 170.001¹⁄₂ x 1 x 1 $40.82 - 20 172.001¹⁄₂ x 1 x 1¹⁄₄ $47.23 - 25 208.001¹⁄₂ x 1 x 1¹⁄₂ $34.04 - 25 229.001¹⁄₂ x 1 x 2 $63.77 - BULK 291.001¹⁄₂ x 1¹⁄₄ x ¹⁄₂ $31.01 - 25 167.001¹⁄₂ x 1¹⁄₄ x ³⁄₄ $32.79 - 20 179.001¹⁄₂ x 1¹⁄₄ x 1 $28.70 - 20 197.001¹⁄₂ x 1¹⁄₄ x 1¹⁄₄ $40.82 - 20 228.001¹⁄₂ x 1¹⁄₄ x 1¹⁄₂ $40.82 - 10 250.001¹⁄₂ x 1¹⁄₄ x 2 $62.49 - 15 307.001¹⁄₂ x 1¹⁄₂ x ¹⁄₂ $28.70 - 20 184.001¹⁄₂ x 1¹⁄₂ x ³⁄₄ $31.01 - 20 195.001¹⁄₂ x 1¹⁄₂ x 1 $28.70 - 30 213.001¹⁄₂ x 1¹⁄₂ x 1¹⁄₄ $40.82 - 25 244.001¹⁄₂ x 1¹⁄₂ x 2 $44.65 - 10 323.001¹⁄₂ x 1¹⁄₂ x 2¹⁄₂ $137.73 - BULK 415.00

2 x ¹⁄₂ x 1¹⁄₂ $73.41 - BULK 295.002 x ¹⁄₂ x 2 $63.77 - 10 330.002 x ³⁄₄ x 1¹⁄₄ $73.41 - BULK 250.002 x ³⁄₄ x 1¹⁄₂ $73.41 - BULK 340.002 x ³⁄₄ x 2 $58.26 - 15 331.002 x 1 x 1 $71.66 - 15 270.002 x 1 x 1¹⁄₄ $73.41 - BULK 294.002 x 1 x 1¹⁄₂ $59.62 - BULK 285.002 x 1 x 2 $64.28 - 15 346.002 x 1 x 2¹⁄₂ $137.73 - BULK 488.002 x 1¹⁄₄ x ¹⁄₂ $73.41 - BULK 248.002 x 1¹⁄₄ x ³⁄₄ $83.46 - BULK 250.002 x 1¹⁄₄ x 1 $71.66 - 15 273.002 x 1¹⁄₄ x 1¹⁄₄ $63.77 - 15 290.002 x 1¹⁄₄ x 1¹⁄₂ $73.41 - BULK 313.002 x 1¹⁄₄ x 2 $55.47 - 15 371.002 x 1¹⁄₄ x 2¹⁄₂ $137.73 - BULK 454.002 x 1¹⁄₂ x ¹⁄₂ $46.57 - 25 234.002 x 1¹⁄₂ x ³⁄₄ $46.57 - 20 246.002 x 1¹⁄₂ x 1 $40.68 - 20 266.002 x 1¹⁄₂ x 1¹⁄₄ $63.72 - 15 298.002 x 1¹⁄₂ x 1¹⁄₂ $62.49 - 15 324.002 x 1¹⁄₂ x 2 $55.47 - 15 370.002 x 1¹⁄₂ x 2¹⁄₂ $118.88 - BULK 546.002 x 2 x ¹⁄₂ $40.68 - 20 274.002 x 2 x ³⁄₄ $40.68 - 20 286.002 x 2 x 1 $40.68 - 15 305.002 x 2 x 1¹⁄₄ $45.68 - 15 338.002 x 2 x 1¹⁄₂ $48.29 - 15 359.002 x 2 x 2¹⁄₂ $103.57 - BULK 517.002 x 2 x 3 $186.76 - BULK 787.002¹⁄₂ x ¹⁄₂ x 2¹⁄₂ $124.35 - BULK 520.002¹⁄₂ x ³⁄₄ x 2¹⁄₂ $121.51 - BULK 510.002¹⁄₂ x 1 x 2 $137.73 - BULK 503.002¹⁄₂ x 1 x 2¹⁄₂ $121.60 - BULK 536.002¹⁄₂ x 1¹⁄₄ x 2 $137.73 - BULK 496.002¹⁄₂ x 1¹⁄₄ x 2¹⁄₂ $137.73 - BULK 540.002¹⁄₂ x 1¹⁄₂ x 1¹⁄₂ $137.73 - BULK 423.002¹⁄₂ x 1¹⁄₂ x 2 $137.73 - BULK 485.002¹⁄₂ x 1¹⁄₂ x 2¹⁄₂ $137.73 - BULK 485.002¹⁄₂ x 2 x ¹⁄₂ $137.73 - BULK 582.002¹⁄₂ x 2 x ³⁄₄ $116.47 - BULK 362.002¹⁄₂ x 2 x 1 $118.78 - BULK 392.002¹⁄₂ x 2 x 1¹⁄₄ $137.73 - BULK 426.002¹⁄₂ x 2 x 2 $121.60 - BULK 517.002¹⁄₂ x 2 x 1¹⁄₂ $132.02 - BULK 442.002¹⁄₂ x 2 x 2¹⁄₂ $119.30 - BULK 600.002¹⁄₂ x 2 x 3 $206.99 - BULK 735.002¹⁄₂ x 2¹⁄₂ x ¹⁄₂ $132.02 - BULK 400.002¹⁄₂ x 2¹⁄₂ x ³⁄₄ $118.78 - BULK 429.002¹⁄₂ x 2¹⁄₂ x 1 $116.47 - BULK 448.002¹⁄₂ x 2¹⁄₂ x 1¹⁄₄ $118.78 - BULK 483.002¹⁄₂ x 2¹⁄₂ x 1¹⁄₂ $121.60 - BULK 514.002¹⁄₂ x 2¹⁄₂ x 2 $118.78 - BULK 588.002¹⁄₂ x 2¹⁄₂ x 3 $206.99 - BULK 809.002¹⁄₂ x 2¹⁄₂ x 4 $551.50 - BULK 1403.003 x ³⁄₄ x 3 $212.07 - BULK 825.003 x 1 x 3 $206.99 - BULK 830.003 x 1¹⁄₄ x 3 $206.99 - BULK 846.003 x 1¹⁄₂ x 3 $206.99 - BULK 813.003 x 2 x 1¹⁄₂ $206.99 - BULK 683.003 x 2 x 2 $206.99 - BULK 729.00

Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

CAST IRON FITTINGS Price ListEffective Date: May 16, 2011 | Replaces Prior Date: October 2010 | Sheet # PF.CI-5.11

www.anvilintl.comRevised: 5

STANDARD SCREWED CAST IRON FITTINGS STANDARD SCREWED CAST IRON FITTINGS

Cross Reducing Fig. 361

Cross Fig. 360

Screwed Hex Coupling Fig. 366

Tee Reducing Fig. 359 (Continued)

1 $16.55 - 60 82.00

1⁄2 $32.41 - - 280.003⁄4 $32.41 - BULK 103.001 $37.74 - BULK 159.0011⁄4 $53.23 - BULK 242.0011⁄2 $73.87 - BULK 321.002 $97.82 - BULK 528.0021⁄2 $235.58 - BULK 807.003 $412.38 - BULK 1184.004 $721.33 - BULK 1963.00

1 x 1 x ³⁄₄ x ³⁄₄ $52.82 - BULK 130.001¹⁄₄ x 1¹⁄₄ x 1 x 1 $61.18 - BULK 204.001¹⁄₂ x 1¹⁄₂ x 1 x 1 $72.75 - BULK 251.001¹⁄₂ x 1¹⁄₂ x 1¹⁄₄ x 1¹⁄₄ $87.56 - BULK 395.001¹⁄₂ x 1¹⁄₂ x 1¹⁄₄ x 1 $119.36 - BULK 390.001¹⁄₂ x 1¹⁄₄ x 1 x 1 $87.56 - BULK 267.001¹⁄₂ x 1 x 1 x 1 $101.67 - BULK 274.002 x 2 x 1¹⁄₄ x 1¹⁄₄ $112.19 - BULK 400.002 x 2 x 1 x 1 $99.61 - BULK 322.002 x 2 x 1¹⁄₂ x 1¹⁄₂ $100.50 - BULK 408.002 x 1¹⁄₂ x 1¹⁄₄ x 1¹⁄₄ $192.41 - BULK 418.002 x 1¹⁄₂ x 1¹⁄₄ x 1 $192.41 - BULK 425.002 x 1¹⁄₂ x 1 x 1 $151.06 - BULK 357.002¹⁄₂ x 2¹⁄₂ x 2 x 2 $269.23 - BULK 682.002¹⁄₂ x 2¹⁄₂ x 1¹⁄₂ x 1¹⁄₂ $276.96 - BULK 568.002¹⁄₂ x 2¹⁄₂ x 1¹⁄₄ x 1¹⁄₄ $300.57 - BULK 526.002¹⁄₂ x 2¹⁄₂ x 1¹⁄₄ x 1 $300.57 - BULK 539.002¹⁄₂ x 2 x 2 x 2 $300.57 - BULK 723.002¹⁄₂ x 2 x 1¹⁄₂ x 1¹⁄₂ $300.57 - BULK 613.002¹⁄₂ x 2 x 1 x 1 $300.57 - BULK 511.003 x 3 x 2 x 2 $476.04 - BULK 885.003 x 3 x 1¹⁄₂ x 1¹⁄₂ $476.04 - BULK 791.004 x 4 x 2 x 2 $822.42 - BULK 1200.00

3 x 2 x 2¹⁄₂ $197.25 - BULK 710.003 x 2 x 3 $206.99 - BULK 879.003 x 2¹⁄₂ x 1 $280.34 - BULK 551.003 x 2¹⁄₂ x 1¹⁄₄ $197.25 - BULK 592.003 x 2¹⁄₂ x 1¹⁄₂ $280.34 - BULK 623.003 x 2¹⁄₂ x 2 $206.99 - BULK 681.003 x 2¹⁄₂ x 2¹⁄₂ $206.99 - BULK 766.003 x 2¹⁄₂ x 3 $206.99 - BULK 913.003 x 3 x ¹⁄₂ $280.34 - BULK 608.003 x 3 x ³⁄₄ $280.34 - BULK 606.003 x 3 x 1 $174.34 - BULK 627.003 x 3 x 1¹⁄₄ $190.73 - BULK 675.003 x 3 x 1¹⁄₂ $206.99 - BULK 710.003 x 3 x 2 $178.03 - BULK 775.003 x 3 x 2¹⁄₂ $206.99 - BULK 892.003 x 3 x 4 $508.26 - BULK 1280.003¹⁄₂ x 3¹⁄₂ x 1¹⁄₂ $485.89 - BULK 887.003¹⁄₂ x 3¹⁄₂ x 2 $485.89 - BULK 994.004 x 1 x 4 $358.99 - BULK 1352.004 x 1¹⁄₂ x 4 $393.80 - BULK 1347.004 x 2 x 2 $423.35 - BULK 1134.004 x 2 x 4 $413.26 - BULK 1389.004 x 2¹⁄₂ x 2¹⁄₂ $506.35 - BULK 1178.004 x 2¹⁄₂ x 4 $413.26 - BULK 1575.004 x 3 x 2 $423.35 - BULK 1021.004 x 3 x 2¹⁄₂ $393.80 - BULK 1125.004 x 3 x 3 $544.27 - BULK 1250.004 x 3 x 4 $413.26 - BULK 1504.004 x 4 x ³⁄₄ $559.67 - BULK 1058.004 x 4 x 1 $515.69 - BULK 1040.004 x 4 x 1¹⁄₄ $465.70 - BULK 1038.004 x 4 x 1¹⁄₂ $413.26 - BULK 1075.004 x 4 x 2 $364.52 - BULK 1163.004 x 4 x 2¹⁄₂ $380.84 - BULK 1285.004 x 4 x 3 $403.68 - BULK 1412.004 x 4 x 5 $960.23 - BULK 2088.004 x 4 x 6 $933.65 - BULK 2636.005 x 5 x 2 $960.23 - BULK 1743.005 x 5 x 2¹⁄₂ $932.06 - BULK 1884.005 x 5 x 3 $960.23 - BULK 2000.005 x 5 x 4 $932.06 - BULK 2383.006 x 4 x 4 $1,198.26 - BULK 3000.006 x 6 x 2¹⁄₂ $1,234.41 - BULK 2567.006 x 6 x 3 $1,198.26 - BULK 2746.006 x 6 x 4 $1,234.41 - BULK 3244.006 x 6 x 5 $1,198.26 - BULK 3700.00

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

www.anvilintl.com Revised: 6

CAST IRON FITTINGS Price ListEffective Date: May 16, 2011 | Replaces Prior Date: October 2010 | Sheet # PF.CI-5.11

1¹⁄₂ x 1 BLK $10.32 $21.41 25 50.001¹⁄₂ x ³⁄₄ BLK $11.76 $23.70 25 47.001¹⁄₂ x ¹⁄₂ $11.76 $23.70 25 42.001¹⁄₂ x ³⁄₈ $17.54 $30.48 25 47.001¹⁄₂ x ¹⁄₄ $15.47 $30.48 25 47.002 x 1¹⁄₄ BLK $14.12 $27.60 15 81.002 x 1 BLK $14.12 $27.60 15 73.002 x ³⁄₄ $14.77 $27.60 15 71.002 x ¹⁄₂ $18.68 $29.70 15 70.002 x ³⁄₈ $21.00 $35.34 15 75.002 x ¹⁄₄ $16.68 $34.52 15 75.002¹⁄₂ x 1¹⁄₂ $22.60 $45.25 BULK 129.002¹⁄₂ x 1¹⁄₄ $25.98 $50.27 20 124.002¹⁄₂ x 1 $25.98 $50.27 BULK 116.002¹⁄₂ x ³⁄₄ $25.98 $50.27 BULK 125.002¹⁄₂ x ¹⁄₂ $24.22 $50.27 BULK 128.003 x 2¹⁄₂ $30.41 $55.37 BULK 163.003 x 2 $26.23 $51.58 BULK 190.003 x 1¹⁄₂ $35.12 $59.69 BULK 179.003 x 1¹⁄₄ $35.12 $64.78 BULK 177.003 x 1 $35.12 $66.32 BULK 190.003 x ³⁄₄ $38.16 $66.32 BULK 192.003 x ¹⁄₂ $39.10 $66.32 BULK 193.003¹⁄₂ x 3 $61.56 $117.78 BULK 196.003¹⁄₂ x 2¹⁄₂ $68.39 $117.78 BULK 323.003¹⁄₂ x 2 $66.77 $117.78 BULK 254.003¹⁄₂ x 1¹⁄₂ $68.39 $117.78 BULK 265.003¹⁄₂ x 1¹⁄₄ $68.39 $107.50 BULK 256.003¹⁄₂ x 1 $68.39 $107.50 BULK 242.004 x 3¹⁄₂ $79.59 $139.00 BULK 250.004 x 3 $59.16 $108.28 BULK 315.004 x 2¹⁄₂ $71.59 $139.00 BULK 329.004 x 2 $59.16 $108.28 20 311.00

1⁄₂ $101.22 $244.67 BULK 175.00³⁄₄ $133.51 $296.35 BULK 200.001 $129.36 $296.35 BULK 225.0011⁄₄ $153.00 $371.11 BULK 475.0011⁄₂ $141.19 $433.08 BULK 500.002 $166.19 $445.71 BULK 650.0021⁄₂ $225.04 $670.86 BULK 850.003 $254.56 $889.39 BULK 1100.0031⁄₂ $431.87 - BULK 1275.004 $346.15 $1,179.95 BULK 1800.005 $806.76 - BULK 2200.006 $757.30 $1,597.71 BULK 3000.008 $1,731.35 $4,064.95 BULK 5100.00

Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv

STANDARD SCREWED CAST IRON FITTINGS STANDARD SCREWED CAST IRON FITTINGSEccentric Reducer Fig. 368 (Continued)Flanged Union Gasket Type Fig. 487

ss

s

Concentric Reducer Fig. 367

Eccentric Reducer Fig. 368

Hex Bushing Fig. 383

s

³⁄₄ x ¹⁄₂ $21.09 - BULK 40.001 x ³⁄₄ BLK $14.29 - 70 63.001 x ¹⁄₂ BLK $10.79 - 80 54.001¹⁄₄ x 1 $37.05 - BULK 107.001¹⁄₄ x ³⁄₄ $31.68 - BULK 90.001¹⁄₄ x ¹⁄₂ $42.60 - BULK 84.001¹⁄₂ x 1¹⁄₄ $52.44 - BULK 145.001¹⁄₂ x 1 $52.44 - BULK 150.001¹⁄₂ x ³⁄₄ $60.24 - BULK 120.001¹⁄₂ x ¹⁄₂ $66.93 - BULK 100.002 x 1¹⁄₂ $68.59 - BULK 198.002 x 1¹⁄₄ $71.66 - BULK 178.002 x 1 $61.08 - BULK 183.002 x ³⁄₄ $68.59 - BULK 190.002 x ¹⁄₂ $76.15 - BULK 200.002 ¹⁄₂ x 2 $97.48 - BULK 298.002¹⁄₂ x 1¹⁄₂ $108.41 - BULK 310.003 x 2¹⁄₂ $154.60 - BULK 440.003 x 2 $119.47 - BULK 396.003 x ³⁄₄ $168.84 - BULK 431.004 x 3 $316.88 - BULK 701.004 x 2¹⁄₂ $316.88 - BULK 778.004 x 2 $316.88 - BULK 650.005 x 4 $434.57 - BULK 1048.006 x 5 $502.46 - BULK 1553.006 x 4 $574.37 - BULK 1383.008 x 6 $2,501.79 - BULK 2910.00

³⁄₄ x ¹⁄₂ $44.39 - BULK 45.001 x ³⁄₄ $47.92 - BULK 61.001 x ¹⁄₂ $46.59 - BULK 57.001¹⁄₄ x ¹⁄₂ $76.57 - BULK 100.001¹⁄₄ x 1 $71.39 - BULK 100.001¹⁄₄ x ³⁄₄ $69.38 - BULK 90.001¹⁄₂ x 1¹⁄₄ $96.78 - BULK 126.001¹⁄₂ x 1 $101.22 - BULK 121.001¹⁄₂ x ³⁄₄ $101.22 - BULK 117.001¹⁄₂ x ¹⁄₂ $96.41 - BULK 111.002 x 1¹⁄₂ $128.35 - BULK 193.002 x 1¹⁄₄ $125.82 - BULK 187.00

2 x 1 $132.12 - BULK 186.002 x ³⁄₄ $145.84 - BULK 183.002 x ¹⁄₂ $129.38 - BULK 180.002 ¹⁄₂ x 2 $195.98 - BULK 295.002¹⁄₂ x 1¹⁄₂ $200.66 - BULK 294.002¹⁄₂ x 1¹⁄₄ $200.66 - BULK 280.002¹⁄₂ x 1 $200.66 - BULK 274.003 x 2¹⁄₂ $292.01 - BULK 480.003 x 2 $242.98 - BULK 461.003 x 1¹⁄₂ $269.97 - BULK 416.003 x 1¹⁄₄ $316.88 - BULK 380.003 x 1 $316.88 - BULK 395.003¹⁄₂ x 2 $440.18 - BULK 523.004 x 3 $571.70 - BULK 764.004 x 2¹⁄₂ $571.70 - BULK 726.004 x 2 $571.70 - BULK 691.004 x 1¹⁄₂ $531.82 - BULK 661.004 x 1¹⁄₄ $571.70 - BULK 658.005 x 4 $699.36 - BULK 1119.005 x 3 $650.55 - BULK 1144.006 x 4 $886.68 - BULK 1536.006 x 3 $886.68 - BULK 1466.00

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

(Hex)(Hex)

s

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

CAST IRON FITTINGS Price ListEffective Date: May 16, 2011 | Replaces Prior Date: October 2010 | Sheet # PF.CI-5.11

www.anvilintl.comRevised: 7

STANDARD SCREWED CAST IRON FITTINGS STANDARD SCREWED CAST IRON FITTINGS

Locknut Fig. 370

Hex Bushing Fig. 383 (Continued)

Face Bushing Fig. 385

Bar Plugs, Solid Fig. 380

Cap Fig. 381

Counter Sunk Plugs Fig. 390

Bar Plugs, Cored Fig. 389

Square Head Plugs, Solid Fig. 388

Square Head Plugs, Cored Fig. 387

4 x 1¹⁄₂ $73.29 $139.00 BULK 344.004 x 1¹⁄₄ $79.59 $139.00 BULK 354.004 x 1 $79.59 $139.00 BULK 359.005 x 4 $120.47 $229.50 BULK 394.005 x 3¹⁄₂ $125.83 - BULK 400.005 x 3 $124.04 $235.00 BULK 483.005 x 2¹⁄₂ $137.87 $214.51 BULK 487.005 x 2 $137.87 $235.00 BULK 512.006 x 5 $142.21 $265.85 BULK 524.006 x 4 $123.13 $250.80 BULK 683.006 x 3 $142.23 $265.85 BULK 775.006 x 2¹⁄₂ $158.08 - BULK 772.006 x 2 $142.23 $265.85 BULK 800.008 x 6 $268.00 $463.44 BULK 1319.008 x 5 $276.96 - BULK 1365.008 x 4 $297.71 - BULK 1393.008 x 3 $366.15 - BULK 1550.0010 x 8 $1,129.22 - BULK 2200.0010 x 6 $1,118.49 - BULK 2450.00

3 x 2 $77.43 - BULK 1330.004 x 3 $147.32 - BULK 1920.004 x 2¹⁄₂ $134.46 - BULK 255.00

s

3⁄4 $3.79 $8.10 120 13.001 BLK $3.79 GALV $8.10 60 25.0011⁄4 BLK $6.05 GALV $13.52 30 39.0011⁄2 BLK $8.56 $18.26 25 50.002 BLK $9.98 GALV $22.68 15 82.0021⁄2 $24.31 $47.92 10 132.003 $28.16 $61.38 BULK 187.0031⁄2 $68.70 $112.08 BULK 250.004 $58.53 $168.42 BULK 400.00

1⁄2 $3.36 $7.51 150 10.003⁄4 $10.13 $21.45 120 17.001 BLK $10.79 $24.32 60 32.0011⁄4 $12.42 $26.50 30 53.0011⁄2 $17.61 $35.34 25 76.002 $22.73 $50.35 15 123.0021⁄2 $33.64 $64.80 10 200.003 $57.39 $114.31 BULK 318.0031⁄2 $135.64 - BULK 438.00

4 $58.00 $119.03 BULK 382.005 $109.03 $236.65 BULK 650.006 $142.33 $269.21 BULK 994.008 $319.46 $624.08 BULK 2026.00

4 $127.63 - BULK 568.005 $237.22 - BULK 960.006 $283.45 - BULK 1478.00

s

1 $13.08 $25.70 60 20.0011⁄4 $13.67 $27.17 30 32.0011⁄2 $16.37 $36.53 25 47.002 $24.14 $51.14 15 84.0021⁄2 $38.16 - 10 140.003 $62.34 - BULK 225.0031⁄2 $108.10 - BULK 302.004 $168.00 - BULK 376.00

21⁄2 $64.62 - BULK 255.003 $85.01 - BULK 410.004 $122.28 - BULK 640.005 $186.19 - BULK 1070.006 $233.28 $924.11 BULK 1420.008 $661.32 $1,292.86 BULK 2723.00

21⁄2 $42.38 - BULK 113.003 $55.47 - BULK 160.004 $84.08 - BULK 110.00

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

www.anvilintl.com Revised: 8

CAST IRON FITTINGS Price ListEffective Date: May 16, 2011 | Replaces Prior Date: October 2010 | Sheet # PF.CI-5.11

STANDARD SCREWED CAST IRON FITTINGS

X.H. 90° Elbow Fig. 421

Floor Flange Fig. 1190 (Ductile Iron)

90° Short Turn Elbow Fig. 701*

90° Extra Long Turn Elbow Fig. 702A*

90° Long Turn Elbow Fig. 702*

60° Short Turn Elbow Fig. 703

X.H. Reducing Tee Fig. 426

X.H. Tee Fig. 425

X.H. 45° Elbow Fig. 424

STANDARD SCREWED CAST IRON FITTINGSX.H. STANDARD SCREWED C.I. FITTINGS

STANDARD SCREWED CAST IRON FITTINGSX.H. STANDARD SCREWED C.I. FITTINGS

CAST IRON DRAINAGE

90° Reducing Short Turn Elbow Fig. 701R*

List Price

siZeOrDer

QtY.UNFiNisHeD

$/eA.OrDer

QtY.GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

1⁄4 $42.95 - BULK 37.001⁄2 $38.49 - BULK 75.003⁄4 $39.55 - BULK 113.001 $47.84 - BULK 179.0011⁄4 $71.22 - BULK 300.0011⁄2 $88.35 - BULK 405.002 $109.03 - BULK 676.0021⁄2 $262.19 - BULK 1056.003 $346.30 - BULK 1525.00

1⁄2 $54.85 - BULK 66.003⁄4 $52.96 - BULK 104.001 $63.57 - BULK 156.0011⁄4 $104.77 - BULK 270.0011⁄2 $115.26 - BULK 355.002 $163.92 - BULK 607.0021⁄2 $283.04 - BULK 979.00

1⁄4

See Malleable Price Sheet Page 5 for List Price

3⁄8*

1⁄23⁄41

11⁄411⁄22

³⁄₄ x ³⁄₄ x ¹⁄₂ $108.03 - BULK 137.001 x 1 x ³⁄₄ $109.78 - BULK 219.001 x 1 x ¹⁄₂ $128.88 - BULK 203.001¹⁄₄ x 1¹⁄₄ x 1 $171.37 - BULK 349.001¹⁄₄ x 1¹⁄₄ x ³⁄₄ $146.01 - BULK 321.001¹⁄₂ x 1¹⁄₂ x 1¹⁄₄ $216.85 - BULK 498.001¹⁄₂ x 1¹⁄₂ x 1 $216.85 - BULK 426.001¹⁄₂ x 1¹⁄₂ x ³⁄₄ $216.85 - BULK 402.002 x 2 x 1¹⁄₂ $294.86 - BULK 769.002 x 2 x 1¹⁄₄ $294.86 - BULK 711.002 x 2 x 1 $251.16 - BULK 657.002 x 2 x ³⁄₄ $239.18 - BULK 624.00

1⁄4 $63.30 - BULK 47.003⁄8 $63.30 - BULK 70.001⁄2 $60.70 - BULK 120.003⁄4 $60.64 - BULK 157.001 $73.22 - BULK 243.0011⁄4 $109.20 - BULK 394.0011⁄2 $140.50 - BULK 531.002 $174.30 - BULK 901.0021⁄2 $371.94 - BULK 1423.003 $507.29 - BULK 2095.004 $986.99 - BULK 3398.00

2 x 1¹⁄₂ $92.74 - - 249.00

11⁄2 $63.42 $76.38 - 224.002 $94.44 $131.12 - 361.003 $344.46 - - 904.004 $588.22 - - 1640.00

11⁄2 $81.91 - - 262.002 $141.64 - - 454.00

11⁄2 $45.33 $67.17 - 191.002 $68.26 $97.07 - 304.003 $256.40 $383.70 - 709.004 $406.08 $746.77 - 1369.00

11⁄2 $82.05 - - 234.00

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

CAST IRON FITTINGS Price ListEffective Date: May 16, 2011 | Replaces Prior Date: October 2010 | Sheet # PF.CI-5.11

www.anvilintl.comRevised: 9

List Price

siZeOrDer

QtY.UNFiNisHeD

$/eA.OrDer

QtY.GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

List Price

siZeOrDer

QtY.UNFiNisHeD

$/eA.OrDer

QtY.GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

45° Short Turn Elbow Fig. 705

45° Long Turn Elbow Fig. 706

221/2° Elbow Fig. 707

CAST IRON DRAINAGE

111/4° Elbow Fig. 708

90° Street Elbow Fig. 718*

45° Street Elbow Fig. 719

Tee Fig. 722*

90° Short Turn Y-Branch Tee Pattern Fig. 726*

90° Reducing Short TurnY-Branch Tee Pattern Fig. 727*

90° Reducing Double Short TurnY-Branch Tee Pattern Fig. 729*

Reducing Tee Fig. 723*

CAST IRON DRAINAGE

45° Y-Branch Fig. 734

45° Reducing Y-Branch Fig. 735

45° Double Y-Branch Fig. 736

Coupling Fig. 753

Tucker Connection Fig. 744

90° Long Turn Y-Branch Tee Pattern Fig. 730*

90° Reducing Long TurnY-Branch Tee Pattern Fig. 731*

11⁄2 $44.30 $66.40 - 171.002 $63.97 $95.02 - 279.003 $250.54 $330.67 - 631.004 $391.61 $540.32 - 1144.00

11⁄2 $55.85 $72.01 - 165.002 $74.40 $107.70 - 308.00

11⁄2 $62.26 $75.57 - 214.00

11⁄2 $59.44 - - 181.002 $110.70 - - 269.00

11⁄2 $64.62 $85.08 - 205.002 $85.56 $133.32 - 310.00

11⁄2 $60.35 $88.04 - 164.002 $97.69 $135.46 - 267.00

s

11⁄2 $74.48 $101.00 - 259.002 $123.15 $169.02 - 466.00

2 x 2 x 1¹⁄₂ $140.22 - - 377.00

11⁄2 $73.14 $102.22 - 309.002 $120.55 $167.05 - 508.003 $443.37 $666.03 - 1177.004 $657.72 $806.36 - 2125.00

2 x 2 x 1¹⁄₂ $123.95 - - 416.002 x 1¹⁄₂ x 1¹⁄₂ $123.95 - - 433.00

2 x 1¹⁄₂ $184.17 - - 582.00

11⁄2 $122.23 - - 443.002 $190.59 $307.99 - 669.00

11⁄2 $223.32 - - 509.00

2 x 2 x 1¹⁄₂ $165.19 $244.52 - -4 x 4 x 3 $897.83 - - -

11⁄2 $89.58 $113.39 - 403.002 $167.07 $227.30 - 556.003 $576.22 $806.00 - 1200.004 $859.78 $1,236.59 - 2451.00

2 x 2 x 1¹⁄₂ $200.04 - - 523.00

11⁄2 $155.48 $149.25 - 175.00

11⁄2 $128.46 - - 404.002 $158.04 - - 540.004 $632.37 - - 2000.00

Weights are for black or unfinished fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities q - Sold in box only, blk/galv | * Tapped pitched ¹⁄₄” to foot.

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

www.anvilintl.com Revised: 10

CAST IRON FITTINGS Price ListEffective Date: May 16, 2011 | Replaces Prior Date: October 2010 | Sheet # PF.CI-5.11

11⁄2 $807.98 - BULK 800.002 $575.05 - BULK 1200.0021⁄2 $613.34 - BULK 1700.003 $596.44 $1,178.22 BULK 2000.004 $671.32 $1,461.82 BULK 3600.005 $1,608.63 - BULK 4500.006 $1,097.53 $2,039.16 BULK 6000.008 $1,604.94 $3,058.42 BULK 9400.0010 $3,391.30 $5,853.49 BULK 14500.0012 $5,181.90 $8,940.64 BULK 22000.00

11⁄2 $669.16 - BULK 900.002 $396.87 $823.56 BULK 1400.0021⁄2 $429.28 $1,126.58 BULK 1900.003 $358.30 $1,110.56 BULK 2400.0031⁄2 $1,024.03 - BULK 3100.004 $443.12 $1,012.47 BULK 4100.005 $1,049.47 $2,133.97 BULK 5200.006 $693.79 $1,630.09 BULK 6800.008 $1,198.00 $2,539.08 BULK 11000.0010 $2,625.62 $4,698.54 BULK 17500.0012 $5,285.55 $7,840.27 BULK 25000.00

Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and or minimum order quantities | q - Sold in box only, blk/galv

List Price QUANtitY

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

Mstr. eAcH

cArtON eAcH

WGt Per 100

CAST IRON DRAINAGEP-Trap Fig. 752

90° Flanged Elbow Fig. 801

Bath P-Trap Fig. 754

CAST IRON FLANGED, STANDARDSTD. 125# - Faced Only, Faced & Drilled*

CAST IRON FLANGED, STANDARD*

s

s

s

45° Flanged Elbow Fig. 802

90° Reducing Flanged Elbow Fig. 803

90° Reducing Flanged Elbow Fig. 803 (Continued)

90° Long Radius Elbow Fig. 804

90° Flanged Long RadiusReducing Elbow Fig. 804R

90° Flanged Base Elbow Fig. 805

90° Flanged Side Outlet Elbow Fig. 808

List Price QUANtitY

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

Mstr. eAcH

cArtON eAcH

WGt Per 100

11⁄2 $133.09 $183.36 - 469.002 $213.09 $320.94 - 718.003 $688.64 $1,013.83 - 1687.00

11⁄2 $136.93 - - 387.002 $219.19 - - 625.00

2¹⁄₂ x 2 $1,297.97 - BULK 1800.003 x 2¹⁄₂ $1,327.46 - BULK 2200.003 x 2 $1,216.87 - BULK 1900.004 x 3 $983.05 - BULK 3300.004 x 2¹⁄₂ $1,502.46 - BULK 3100.00

4 x 2 $1,502.46 - BULK 2900.005 x 4 $1,980.42 - BULK 4800.005 x 3 $2,089.99 - BULK 4000.006 x 5 $2,071.07 - BULK 6000.006 x 4 $1,219.08 - BULK 5600.006 x 3 $2,165.22 - BULK 4700.008 x 6 $1,778.66 - BULK 9000.008 x 5 $3,168.53 - BULK 8200.008 x 4 $2,398.51 - BULK 7700.0010 x 8 $3,386.66 - BULK 17300.0010 x 6 $4,947.06 - BULK 12500.0012 x 10 $6,489.89 - BULK 22000.0012 x 8 $8,576.16 - BULK 19000.0012 x 6 $9,306.75 - BULK 16500.00

2 $1,068.72 - BULK 1600.0021⁄2 $1,117.41 - BULK 2300.003 $1,154.48 - BULK 2800.004 $1,058.77 - BULK 4800.005 $2,069.28 - BULK 6200.006 $1,531.46 - BULK 8500.008 $2,943.65 - BULK 14500.0010 $4,582.42 - BULK 23000.0012 $9,442.26 - BULK 35000.00

4 x 3 $2,520.16 - BULK 4600.005 x 4 $2,921.35 - BULK 5800.006 x 5 $3,587.30 - BULK 8100.006 x 4 $3,289.40 - BULK 7800.008 x 6 $6,080.21 - BULK 13000.0010 x 8 $10,396.60 - BULK 20500.00

3 $1,800.13 - BULK 3600.004 $1,721.84 - BULK 5900.006 $2,933.60 - BULK 11000.008 $3,887.77 - BULK 15800.0010 $6,527.64 - BULK 22400.0012 $8,989.56 - BULK 32400.00

4 $5,713.02 - BULK 5900.006 $7,337.60 - BULK 9600.008 $9,177.96 - BULK 15000.00

* Faced only, not stocked. Galvanized fittings not stocked in all types and sizes, but may be produced to order.

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

CAST IRON FITTINGS Price ListEffective Date: May 16, 2011 | Replaces Prior Date: October 2010 | Sheet # PF.CI-5.11

www.anvilintl.comRevised: 11

2 x 1¹⁄₂ $1,282.25 - BULK 1200.002¹⁄₂ x 2 $1,001.62 - BULK 1400.002¹⁄₂ x 1¹⁄₂ $1,282.25 - BULK 1200.003 x 2¹⁄₂ $795.16 $1,303.94 BULK 1900.003 x 2 $795.16 - BULK 1600.003 x 1¹⁄₂ $1,308.17 - BULK 1400.004 x 3 $893.42 $1,585.94 BULK 2800.004 x 2¹⁄₂ $961.04 $1,882.81 BULK 2600.004 x 2 $1,062.16 $1,882.81 BULK 2400.005 x 4 $1,381.48 - BULK 3900.005 x 3 $1,571.41 - BULK 3200.005 x 2¹⁄₂ $2,204.69 - BULK 3100.006 x 5 $1,314.32 - BULK 5000.006 x 4 $1,196.49 $2,310.71 BULK 4700.006 x 3 $1,377.38 - BULK 3900.006 x 2¹⁄₂ $1,817.14 - BULK 3700.006 x 2 $2,402.62 - BULK 3400.008 x 6 $1,505.83 $2,675.28 BULK 7700.008 x 5 $2,726.68 - BULK 7100.008 x 4 $1,734.66 - BULK 6600.0010 x 8 $3,105.49 - BULK 12000.0010 x 6 $3,382.44 - BULK 10000.0010 x 5 $5,702.63 - BULK 9000.0010 x 4 $5,702.63 - BULK 8500.0012 x 10 $5,356.48 - BULK 18000.0012 x 8 $5,920.40 - BULK 15500.0012 x 6 $6,190.16 - BULK 14000.00

3 x 3 x 2¹⁄₂ $1,316.73 - BULK 3500.003 x 3 x 2 $1,030.72 - BULK 3400.003 x 3 x 1¹⁄₂ $1,421.71 - BULK 3200.003 x 2 x 3 $1,359.86 - BULK 3300.004 x 4 x 3 $1,388.75 - BULK 5700.004 x 4 x 2¹⁄₂ $1,516.63 - BULK 5600.004 x 4 x 2 $1,388.75 - BULK 5100.004 x 3 x 4 $3,321.00 - BULK 5900.004 x 3 x 3 $3,483.33 - BULK 5300.004 x 2¹⁄₂ x 4 $2,000.83 - BULK 5600.004 x 2 x 4 $3,252.36 - BULK 5000.003 x 3 x 4 $1,905.51 - BULK 5600.005 x 5 x 4 $3,002.19 - BULK 8000.005 x 5 x 3 $3,002.19 - BULK 7100.006 x 6 x 5 $2,675.86 - BULK 10500.006 x 6 x 4 $1,336.93 - BULK 9700.006 x 6 x 3 $1,944.89 - BULK 9200.006 x 6 x 2¹⁄₂ $2,602.22 - BULK 9000.006 x 6 x 2 $2,732.36 - BULK 8600.006 x 5 x 4 $4,139.90 - BULK 9100.006 x 4 x 6 $1,540.37 - BULK 9400.006 x 4 x 4 $1,702.56 $3,020.30 BULK 8800.006 x 3 x 6 $4,072.56 - BULK 9100.004 x 4 x 6 $2,681.81 - BULK 8800.008 x 8 x 6 $2,088.51 $4,623.51 BULK 15600.008 x 8 x 4 $2,509.66 $4,712.98 BULK 14300.008 x 8 x 3 $4,782.49 - BULK 14000.008 x 6 x 8 $3,316.33 - BULK 15900.008 x 6 x 6 $2,510.06 - BULK 14400.008 x 6 x 4 $4,255.19 - BULK 12500.008 x 4 x 8 $4,428.78 - BULK 14600.008 x 4 x 6 $4,571.27 - BULK 14000.006 x 6 x 8 $3,316.33 - BULK 14200.0010 x 10 x 8 $4,774.30 - BULK 26200.0010 x 10 x 6 $5,552.43 - BULK 24000.0010 x 10 x 4 $5,422.36 - BULK 22500.0010 x 8 x 10 $7,548.52 - BULK 26200.0010 x 8 x 8 $5,276.80 - BULK 23200.0010 x 8 x 6 $7,548.52 - BULK 22000.0012 x 12 x 10 $8,263.73 - BULK 36200.0012 x 12 x 8 $8,383.09 - BULK 33000.0012 x 12 x 6 $7,085.06 - BULK 32300.0012 x 8 x 12 $11,397.25 - BULK 34000.0012 x 8 x 8 $11,397.25 - BULK 29800.00

CAST IRON FLANGED, STANDARD* CAST IRON FLANGED, STANDARD*Flanged Tee Fig. 811

Flanged Reducing Tee Fig. 812

s

s

Flanged Cross Fig. 821

Flanged Lateral Fig. 823

Flanged Concentric Reducer Fig. 825

s

11⁄2 $769.34 - BULK 1500.002 $434.54 $777.04 BULK 2100.0021⁄2 $632.90 $1,049.17 BULK 3000.003 $443.56 $1,053.42 BULK 3700.004 $674.71 $1,667.70 BULK 6400.005 $1,807.44 - BULK 8100.006 $979.12 $2,293.01 BULK 10500.008 $1,672.78 $3,615.12 BULK 16500.0010 $4,501.01 $6,861.50 BULK 27000.0012 $7,070.62 $10,481.81 BULK 38000.00

2 $1,410.31 - BULK 2800.0021⁄2 $1,261.11 - BULK 3900.003 $1,324.21 - BULK 4800.004 $1,729.70 - BULK 8200.006 $3,622.50 - BULK 13500.008 $5,834.24 - BULK 21000.0010 $6,921.04 - BULK 33000.00

2 $1,611.62 - BULK 2500.0021⁄2 $1,774.11 - BULK 3600.003 $1,897.77 - BULK 4400.004 $2,477.36 - BULK 7500.005 $3,847.08 - BULK 9600.006 $3,768.91 - BULK 12500.008 $6,175.61 - BULK 21000.00

* Faced only, not stocked. Galvanized fittings not stocked in all types and sizes, but may be produced to order.

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

www.anvilintl.com Revised: 12

CAST IRON FITTINGS Price ListEffective Date: May 16, 2011 | Replaces Prior Date: October 2010 | Sheet # PF.CI-5.11

1 x 5 $171.12 - BULK 275.001 x 6 $163.10 - BULK 500.001¹⁄₄ x 5 $166.73 - BULK 250.001¹⁄₄ x 6 $156.29 - BULK 475.001¹⁄₂ x 6 $133.77 $264.27 BULK 450.001¹⁄₂ x 7 $172.48 $269.63 BULK 700.002 x 7 $125.14 $291.21 BULK 675.001 x 7¹⁄₂ $246.90 - BULK 900.001¹⁄₂ x 7¹⁄₂ $206.79 $409.45 BULK 875.002 x 7¹⁄₂ $166.86 $392.35 BULK 850.002¹⁄₂ x 7¹⁄₂ $179.07 $409.45 BULK 800.003 x 8¹⁄₂ $325.29 - BULK 1000.001¹⁄₂ x 9 $305.43 $518.70 BULK 1400.002 x 9 $226.79 $549.70 BULK 1400.002¹⁄₂ x 9 $243.36 $518.70 BULK 1350.003 x 9 $226.79 $549.70 BULK 1275.003¹⁄₂ x 9 $275.08 - BULK 1200.003 x 10 $419.23 $655.43 BULK 1700.004 x 10 $350.94 $704.59 BULK 1600.001¹⁄₂ x 11 $537.61 - BULK 2700.002 x 11 $414.75 $827.03 BULK 2600.002¹⁄₂ x 11 $492.79 $887.37 BULK 2500.003 x 11 $414.75 $827.03 BULK 2300.004 x 11 $342.06 $818.93 BULK 2100.00

³⁄₄ x 3⁷⁄₈ $88.53 $164.60 BULK 150.001 x 4¹⁄₄ $57.91 $131.07 BULK 175.001¹⁄₄ x 4⁵⁄₈ $69.27 $150.47 BULK 200.001¹⁄₂ x 5 $64.03 $153.94 BULK 225.002 x 6 $63.90 $135.38 BULK 400.002¹⁄₂ x 7 $74.75 $158.38 BULK 600.003 x 7¹⁄₂ $96.28 $192.46 BULK 763.003¹⁄₂ x 8¹⁄₂ $134.92 - BULK 900.004 x 9 $129.75 $262.13 BULK 1175.005 x 10 $183.30 $411.54 BULK 1400.006 x 11 $207.40 $439.86 BULK 1650.008 x 13¹⁄₂ $327.36 $763.79 BULK 2600.0010 x 16 $580.17 $1,150.39 BULK 3775.0012 x 19 $1,276.64 $2,350.36 BULK 5050.00

Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and or minimum order quantities | q - Sold in box only, blk/galv

List Price QUANtitY

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

Mstr. eAcH

cArtON eAcH

WGt Per 100

List Price QUANtitY

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

Mstr. eAcH

cArtON eAcH

WGt Per 100

CAST IRON FLANGED, STANDARD*Flanged Eccentric Reducer Fig. 826

CAST IRON FLANGED FITTINGSEXTRA HEAVY 250 LBS.

FACED ONLY, FACED & DRILLED*X.H. 90° Flanged Elbow Fig. 831

X.H. Flanged Tee Fig. 841

X.H. Flanged Reducing Tees Fig. 842

X.H. Flanged Concentric Reducer Fig. 855

CAST IRON FLANGED FITTINGSX.H. Flanged Concentric Reducer Fig. 855 (Cont.)

IRON FLANGES, STANDARD

s

s

s

s

3 x 2 $1,199.48 - BULK 1600.003 x 2¹⁄₂ $1,216.87 - BULK 2200.004 x 3 $1,450.09 - BULK 2800.004 x 2¹⁄₂ $1,671.87 - BULK 2800.004 x 2 $1,675.62 - BULK 2800.005 x 4 $2,204.96 - BULK 3900.006 x 5 $1,369.68 - BULK 5100.006 x 4 $1,369.68 $2,573.65 BULK 5000.006 x 3 $2,286.25 - BULK 4700.008 x 6 $1,735.01 - BULK 7700.008 x 5 $2,250.58 - BULK 7600.008 x 4 $2,352.84 - BULK 7100.0010 x 8 $4,419.51 - BULK 12000.0010 x 6 $5,183.69 - BULK 10700.0012 x 10 $5,990.64 - BULK 18000.0012 x 8 $6,204.60 - BULK 15500.00 Cast Iron Companion Flange Fig. 1011

Cast Iron Reducing Flange Fig. 1016

2 $1,047.05 - BULK 2000.0021⁄2 $1,138.29 - BULK 3000.003 $1,158.81 - BULK 4000.004 $1,667.50 - BULK 6500.006 $2,390.36 - BULK 11500.008 $3,913.54 - BULK 18500.00

21⁄2 $1,481.75 - BULK 4600.003 $1,659.30 - BULK 5800.004 $2,630.51 - BULK 9900.006 $3,893.14 - BULK 18000.008 $6,571.83 - BULK 28000.00

6 x 6 x 4 $5,338.36 - BULK 16000.008 x 8 x 6 $8,166.77 - BULK 25700.00

3 x 2¹⁄₂ $1,988.07 - BULK 2900.003 x 2 $1,988.07 - BULK 2500.004 x 3 $2,692.43 - BULK 4400.004 x 2¹⁄₂ $2,692.43 - BULK 4000.006 x 5 $3,757.63 - BULK 8500.00

6 x 4 $3,776.63 - BULK 7700.006 x 3 $3,757.63 - BULK 6700.008 x 6 $5,123.54 - BULK 13000.008 x 4 $5,123.54 - BULK 10500.0010 x 8 $9,064.07 - BULK 19000.0010 x 6 $9,064.07 - BULK 17000.00

* Faced only, not stocked. Galvanized fittings not stocked in all types and sizes, but may be produced to order.

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

Weights are for black fittings | For galvanized, add 100% to the black list price unless the galvanized list price is listed | s Extended lead times and/or minimum order quantities | q - Sold in box only, blk/galv

List Price

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

QtY. cArtON eAcH

WGt Per 100

CAST IRON FITTINGS Price ListEffective Date: May 16, 2011 | Replaces Prior Date: October 2010 | Sheet # PF.CI-5.11

www.anvilintl.comRevised: 13

List Price QUANtitY

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

Mstr. eAcH

cArtON eAcH

WGt Per 100

List Price QUANtitY

siZeOrDer

QtY.BLAcK $/eA.

OrDer QtY.

GALV. $/eA.

Mstr. eAcH

cArtON eAcH

WGt Per 100

5 x 11 $433.52 $827.03 BULK 1900.002 x 13¹⁄₂ $760.19 - BULK 4400.003 x 13¹⁄₂ $760.19 $1,362.68 BULK 4000.004 x 13¹⁄₂ $585.46 $1,215.05 BULK 3700.005 x 13¹⁄₂ $821.73 - BULK 3400.006 x 13¹⁄₂ $530.74 $1,305.90 BULK 3100.006 x 16 $1,539.76 - BULK 5300.008 x 16 $1,458.65 - BULK 5000.006 x 19 $1,673.21 - BULK 8800.008 x 19 $1,790.88 - BULK 8100.00

IRON FLANGES, STANDARDCast Iron Reducing Flange Fig. 1016 (Continued)

s

Cast Iron Blind Flange Fig. 1018

X.H. Cast Iron Companion Flange Fig. 1025

Cast Iron Flanges for Cast Iron Pipe Fig. 1010T

X.H. Cast Iron Blind Flange Fig. 1021

Screwed Cast Iron Fig. 1538

X.H. Cast Iron Reducing Flange Fig. 1030

IRON FLANGES, EXTRA HEAVY

IRON FLANGES, EXTRA HEAVY

HIGH HUB FLANGES FOR C.I. PIPE

SAFETY VALVE DISCHARGE ELBOWS

1 x 4¹⁄₄ $92.16 $157.86 BULK 200.001¹⁄₄ x 4⁵⁄₈ $97.38 $172.45 BULK 225.001¹⁄₂ x 5 $103.38 - BULK 375.002 x 6 $116.78 $182.90 BULK 400.002¹⁄₂ x 7 $128.36 - BULK 675.003 x 7¹⁄₂ $153.85 $266.23 BULK 800.003¹⁄₂ x 8¹⁄₂ $227.26 - BULK 1100.004 x 9 $197.06 $372.60 BULK 1400.005 x 10 $320.17 $608.32 BULK 1800.006 x 11 $348.30 $645.80 BULK 2300.008 x 13¹⁄₂ $546.47 $853.76 BULK 4000.0010 x 16 $808.43 - BULK 5900.0012 x 19 $1,516.43 - BULK 8800.00

1¹⁄₄ x 5¹⁄₄ $203.89 - BULK 375.001¹⁄₂ x 6¹⁄₈ $239.37 - BULK 575.002 x 6¹⁄₂ $182.19 $417.42 BULK 650.002¹⁄₂ x 7¹⁄₂ $262.12 $500.53 BULK 950.003 x 8¹⁄₄ $285.00 $595.78 BULK 1233.004 x 10 $462.73 $806.20 BULK 2000.005 x 11 $620.49 - BULK 2400.006 x 12¹⁄₂ $759.78 - BULK 3200.008 x 15 $1,287.35 - BULK 5100.00

2 x 8¹⁄₄ $580.89 - BULK 1425.003 x 10 $818.43 - BULK 2275.00

1¹⁄₂ x 6¹⁄₈ $256.69 - BULK 525.002 x 6¹⁄₂ $295.26 - BULK 700.002¹⁄₂ x 7¹⁄₂ $351.11 - BULK 1100.003 x 8¹⁄₄ $402.95 - BULK 1400.004 x 10 $588.83 - BULK 2300.005 x 11 $756.50 - BULK 3100.006 x 12¹⁄₂ $1,014.11 - BULK 4200.008 x 15 $1,633.98 - BULK 7000.00

3 x 7¹⁄₂ $205.86 - BULK 750.004 x 9 $216.53 - BULK 1300.006 x 11 $305.56 - BULK 1720.008 x 13¹⁄₂ $509.72 - BULK 2900.0010 x 16 $868.22 - BULK 4200.0012 x 19 $1,178.92 - BULK 6000.00

21⁄2 $1,585.42 - BULK 1200.003 $1,702.11 - BULK 1500.004 $2,296.08 - BULK 2700.00

– NOTES –

– NOTES –

Corporate Offices110 Corporate Drive, Suite 10 P.O. Box 3180 Portsmouth, NH 03801-3180

Tel: 603-422-8000 Fax: 603-422-8033

E-mail: [email protected]

U.S. RegiOnal SeRviCe CenteRS

anvil international CanadaCustomer Service Center390 Second AvenueP.O. Box 40Simcoe, Ontario N3Y 4K9

Tel: 519-426-4551Fax: 519-426-5509

Canada SeRviCe CenteR

www.anvilintl.com

b u i l d i n g c o n n e c t i o n s t h a t l a s t

northern RegionRegional Distribution & Customer Service Center750 Central Avenue University Park, IL 60484

Tel: 708-885-3000 Fax: 708-534-5441 Toll Free: 1-800-301-2701

Southern RegionRegional Distribution & Customer Service Center1401 Valley View Lane, Suite 150Irving, TX 75061

Tel: 972-871-1206 Fax: 972-641-8946 Toll Free: 1-800-451-4414

inteRnatiOnal SaleS

Mexico, Puerto Rico andlatin americaAbraham Quijada, Sales [email protected]

Tel: +1-281-590-4600

International Customer Service Tel: +1-708-885-3000 Fax: +1-708-534-5441

europe and Middle east RegionRick van Meesen, Sales DirectorThe [email protected]

Tel: +31-53-5725570 Fax: +31-53-5725579

International Customer Service Tel: +1-708-885-3000 Fax: +1-708-534-5441

#580 / Printed in USA / ©2011Revisions: March 21, 2011