Casing Tools

Single Joint Elevator SJX Single Joint Elevator

2 3/8” to 30” – 5 Ton, Elevators as developed for the drilling 2 3/8” to 14” – 5 ton, SJX Elevators has two hinges that enable

around the tool joint of drill pipe, casing ( for collars ) to easy use with most casing running tools as it opens from either

facilitate the lifting or lowering of them singly or of the drill side, can also be used as a standalone elevator to hoist casing

string as a whole. pipe. SJX Single Joint Elevator are fastened to prevent dropping

Lock key pins into the well.

Side Door Elevator Y Series Slip Type Elevator

2 3/8” to 42” – 100 tons to 500 tons, side door elevator has 2 types MYT-YT-YC-MYC-HYC – Y center latch, slip type manual

SLX and SX, the Elevators should only be used with tubular having elevators for tubing (YT,MYT) and casing (YC,HYC,MYC)

square shoulder connections. The elevator hoist a variety of small casing and tubing

with the proper size clips & slip setting ring installed.

A Series Center Latch Elevator SX Side Door Elevator

2 3/8” to 11 ¼” – 65ton – 150ton, “A” Series center latch collar 9 5/8” to 18 5/8” 350tons – 500 tons. The SX Elevator, designed

type elevators for handling drill pipe & casing. A series elevators for handling large, collar type casing, is sturdier and has a safety

should only be used with square shoulder. latch requiring, two handed operation. The casing size ranges

up to 36” with load rating of 350 and 500 tons.

10 ¾” 100 Ton Bowl 13 3/8” 200Ton Hinged Spider

100 Ton API Bowl in both the 8 5/8” and 10 ¾”. Both sizes comes 13 3/8” Hinged Casing Spider. It will fit most casing handling

with standard 4” Taper operations. It can be placed on the rotary table, mounted

on a platform which replaces the rotary table depending on

the procedure followed.

36” 500Ton Hinged Casing Spider Pneumatic 36” 500Ton Hinged Spider

Hinged casing spiders are used during casing handling operations when Pneumatic Hinged Casing Spider is mounted on the rotary on

cementing equipment will not clear closed spider or rotating table, the rotary table or used in place of rotary table. The hinged

casing will not pass or clear a spider or rotary, or where it is preferred casing spider has two halves, held together by removable

to not place heavy casing string loads directly on rotary table bearings. Hinged pins.

Con Tech Thread Protectors

Contech manufactures casing thread protectors

( for 8 round, buttress and premium threads ) in sizes for 4 ½” to 16”

These quick latch protectors offer advantages in durability, weight and

Reduced cost over other products & because of their non-ferrous metal

catch assembly.

Hydraulic Power Tong Power Tong

Hydraulic Tubing Tong can handle tubular as small as 2 1/16” and Hydraulic Tubing Tong offers a significantly reduced rig footprint

as large as 5 ½” in diameter. while continuing to deliver power and reliability.

Casing Drive System

Casing running tools provide a mechanized, safe and cost effective way to run and make-up casing

The purpose of CDS model is to provide a mechanized way of running casing and ensuring that casing

reaches bottom without fail.

Cementing Swivel Becket & Tool Pushing Links

Cement Swivel provides an entry port for the cement between Tool Pushing Links are designed for light loads mostly used

the CDS and the top drive. This combination of equipment allows for work over. They are made from forgings, bent heat

almost immediate transition from casing running operations to treated, manuafluxed and load tested. Our size ranges

cementing, and it also allows the casing to be rotated and from 36” to 48”.

reciprocated during the cementing process.

Drill Pipe Elevator Kelly Drive Bushing HDP, HDS

Drill Pipe Elevators are used for handling and lift tubing, drill pipe Kelly Drive Bushing acts as an adapter that serves to connect

drill collar and casing. The rotary table to the Kelly. The Kelly bushing has an inside

diameter profile that matches that of the Kelly, usually square

Hexagonal.

Drill Bowls Pneumatic Tubing Spider

Drill Bowls are designed to fit inside the MPCH and The Pneumatic tubing spider is used for oil well drilling and

MSPC master bushing. workover servicing operations. The spider allows the cable

pass through during operation. Conforms to API standard.

Safety Clamp Safety Clamps : 4 Types

Safety Clamp are designed to hold flush joint tubular or other Four types of safety clamps, Type:”C”, Type “T”, Type:”C” Air over

Slick tools safely and prevent the dropping of strings (tubing, Hydraulic and Multi-purpose (MP).

drill collar, etc. ) into the well.

Casing Slip XL Slip

Are hinged together to wrap around the casing and exert XL-Slips are manufactured from castings, reinforced to

a more uniform pressure. to take severe service. The self centering full wraparound

grip prevents damage to casing.

Drill Collar Slips DU Slips

Slips hold the string weight in place, acting as a wedge. The slips The “DU” Rotary slips are designed for long trouble free

and inserts are easily changed. service. They are made of alloy steel and heat-treated

for strength and resistance to wear. Both slips are for

use in API tapered bowls.

Rotary Slips

SDS,SDML and SDXL Rotary slips are for use in API Standard insert

bowls. Featuring better contract and distribution of load on drill

pipe thru a superior wraparound configuration and unique insert

design, these slips prevent bottlenecking and gouging damage.

350 Ton Link Extension Control Box

350 Ton Links and Link Extensions are used to hang Elevators. Mounted flush with Rig floor, allowing the casing

connection height to be lowered 1 mtr (3ft), thus

eliminating the need for scaffolding.

750 Ton Elevator Spider Stabbing Guide

Dressed as an Elevator, the tool uses a bottom guide Stabbing Guide is used to align two joints of drill pipe, casing or tubing.

plate and a casing guide bell, which centers the pipe. Consistent alignment increases the speed of connections and reduces

thread-related downtime.

Cement Plug / Plugs

Cement plugs are used for variety of applications including hydraulic isolation,

provision of a secure platform, and in window-milling operations for side tracking

a new wellbore.

Sucker Rod

A Sucker Rod is a steel rod, typically between 25 and 30 feet (7to9 meters ) in

length, and threaded at both ends, used in the oil industry to join together the

surface and downhole components of a reciprocating piston pump installed in

an oil well.

Connecting Rod

Connecting Rods or Conrod connects the piston to the crank or crankshaft.

Together with the crank, they form a simple mechanism that converts reciprocating

motion into rotating motion.

Fishing Magnet Junk Basket

Fishing magnets are used to retrieve all types of small objects Junk Basket is a rugged junk fishing device, using either a

having magnetic attraction from bore hole bottoms. Such Mill shoe or Flat bottom type shoe in conjunction with two

undrillable objects as bit cones, bearings, slips, tong pins and sets of free revolving finger type catchers.

milling cuttings can often be retrieved only by magnetic attraction.

Drilling Jar Hydraulic Drilling Jar

A mechanical device used downhole to deliver an impact load to Is a double-acting hydraulic jar designed for simple operation

another downhole component, especially when that component is stuck. variable hitting loads, and extended periods of continous jarring

in a wide range of drilling conditions.

Hose Loop Ram BOP

Hose Loops are suitable for HP discharges pipelines, water Ram Bop is the importantequipment widely used in onshore

Supply lines, well test lines, cementing slurry lines and other and offshore drilling. Ram BOP, such as single ram BOP, double

HP supply. ram BOP, triple ram BOP, quadplex ram BOP are mainly

hydraulic operated or manual operated.

Manual Rotary Tong Back Saver

Manual tong is an essential tool in oil drilling operation to fasten Back Saver is a hydraulic and pneumatically powered drill pipe

or remove the screws of drill pipe and casing joint or coupling. slip. It has been designed specifically to increase safety and

productivity on the Rig floor.

Decanter Centrifuge Coal Screen Scroll Centrifuge

Decanter centrifuge makes full use of centrifugal sedimentation principle Vertical Screen Scroll Centrifuge allows you to handle coal

to achieve effective separation of infinitesimal particles and solid particles from higher fines recovery and maintaining the lowest

It is primarily applied in industries like oil drilling, chemical engineering, products discharge moisture possible.

petroleum, food, medicine, ore dressing, coal, water treatment, shipbuilding.

Cylinder Cover / Wartsila Cylinder Cover

A metal casting which fits over a cylinder, Cylinder head, Cylinder cover.

Alfa Laval MAB 205 Separator

This unit are used extensively on the smaller ships, larger boats

and yachts. Separation takes place in a solid-retaining bowl

that can be arranged for either clarification or purification.

Compressor

Is a mechanical device that increases the pressure of a gas by reducing its volume.

An air compressor is a specific type of gas compressor. Compressors are similar to

pumps; both increase the pressure on a fluid and both can transport the fluid through

a pipe.

Pumps

A Pump is a device that moves fluids ( liquid or gases ), or something slurries, by

mechanical action. Pumps can be classified into three major groups according to

the method they use to move the fluid : direct lift, displacement, and gravity pumps.

Downhole Motor Test Bench

Downhole Motor Test Bench consists of host machine, dynamical system, circulatory system, hydraulic control system, cooling system, testing

system, and can test the performance of downhole motors from 1 11/16” to 11 1/4” under whole-working condition. The test bench adopts

advanced control system to implement automatic, semi-automatic or manual testing on loading torque, adjusting flow rate, collect the data such

as torque, rotating rate, differential pressure, flow rate, temperature, etc and output the performance parameter table and curve of downhole

motor. The test bench fully meet the requirement of manufacturers and oil field to test the performance of downhole motors.

Agitator

Agitator can increase the effectiveness of weight on bit transfer by axial vibration itself in the process of drilling, can reduce the friction resistance

between the bottom of the drill and drill hole,can be applied in all kinds of drilling mode to improve the rate of penetration. The axial vibration of

Agitator is continuous and soft,different with the conventional rotary drilling in form. That is to say,to make the bit pressure of conventional

rotary drilling change continuously and softly as the sine rule.

Hydraulic Thruster

hydraulic thruster is a new type of downhole bit pressure-exerting tool, which using the pressure drop of circular drilling fluid at bit nozzle to exert

pressure to drilling bit, hereby realize accurate pressure-exerting and uniform drilling, without consuming any extra energy. The application of

DTYJ hydraulic thruster can not only solve the problem of drilling pressure loss in horizontal wells, extended reach wells and slimhole wells, but

also effectively control well deviation, damp&anti-bounce, improve the ROP, and extend bit’s life. It is a practical tool in oil-drilling process with

low-cost, easy-operation and significant effect.

BOP Hose

Accumulator BOP Control System

Accumulator BOP control system, also called as BOP closing unit, is one important system in drilling and work-over operation.

As per different working conditions, accumulator BOP control system can be in pneumatic, hydraulic, or electric control.

All accumulator BOP control system (BOP closing unit) Jereh provides are made according to API Spec 16D with high quality,

as Koomey closing unit ( Koomey accumulator) does. Customized BOP closing unit can be available too.

Annular Blowout Preventer (Annular BOP)

Annular Blowout Preventer (Annular BOP) is important equipment widely used in onshore and offshore drilling. Jereh provides three types of annular

BOP: bolted-cover, wedged-cover, latched-cover type.

All types of annular BOP are strictly manufactured as per API Spec 16A with high quality as Shaffer annular BOP or Hydril annular BOP does.