Casing thread solutions_16_9

Bore Casing & Screens Pipes & Components Environmental Drilling Water Treatment Safety Products Sand Spears Pumps

Case Study

Ph 1300 133 000

Casing - Thread Solutions

The Problem


Ph 1300 133 000

Threaded casing needs to be joined together but you have no clue on what type of thread is on the original pipe, or in some cases, you need a left hand threaded casing to telescope casing to a certain depth.

The Problem


Ph 1300 133 000

You have some old casing left lying in the yard, but do not quite have enough to meet your requirements. Make a change over piece from a older casing to a new standard thread

Requirements


Ph 1300 133 000

To create a threaded joint that matches the existing thread on the pipe or sample that you have existing.

Requirements


Ph 1300 133 000

Have the required thread strength.Use your existing lifting piece.

Requirements


Ph 1300 133 000

Old pipe material used, to have the same ID and Od, or as close as possible.A Change over piece from and existing thread to a standard thread that is kept in stock.

Solution


Case Study

Ph 1300 133 000

The solution is to measure the sample thread you already have and send the detail to a workshop that can machine the thread.

Solution


Ph 1300 133 000

OrSend a sample of the thread, lifting piece or any other sample you have.

Deps Answer


Ph 1300 133 000

Peter Adams from Adams Drilling was drilling a new hole for a client and already had the majority of casing needed,

Deps Answer


Ph 1300 133 000

He sent down a sample of the casing and we manufactured the lengths he needed to match his existing casing, so he could complete his project.

Deps Answer


Ph 1300 133 000

We regularly work with Ross from Drilltec, with a yard full of casing, there are still times , when there’s just not enough to do the Job, they put the sample of casing on the truck and send it down,

Deps Answer


Ph 1300 133 000

We source some pipe the correct size to use and then manufacture the thread or change over piece.

Alternatives


Ph 1300 133 000

Really the only alternative is to buy a complete new pack of casing, to ensure all the threads are the same.

Alternatives


Ph 1300 133 000

There is no off the shelf threaded casing that has a left hand thread for telescope installations.

Alternatives


Ph 1300 133 000

Can only be machined, by a company that has large specialized machines that can handle pipe, such as workshops that do work for oil rigs and drillers, gas casing etc.

The End Result


Ph 1300 133 000

I would like to thank you very much for the effort you went to get the pipe correct, it is an important contract for our company and I think in the future they will want to use more of it. Alana - Highland Drilling

The End Result


Ph 1300 133 000

Exactly what we wanted absolutely happy with everything - Peter , United drilling

The End Result


Ph 1300 133 000

I know I can get it cheaper done else were but my neck is on the line and I need to sleep at night with this job as it is so important, therefore I need you to do this job as I know that it will be done properly, as you have a great reputation out there. - Mick , Idam Sa

Thank you for taking the time to look at the information we have created for you,We hope this will be of assistance to solving your piping, drainage and drilling challenges.

If you have any more questionsPlease feel free to contact myself or one of our team


Article


For more Articles, Case Studies, How to and Information go to www.deps.com.au

then click onto Handy Linksor contact us on1300 133 000

[email protected]

Case Study

Ph 1300 133 000

SlottingCuttingFabricatingPipe TestingPerforationDrawingsSpear PointsSafetyPumps


Deps Products and Capabilities

ThreadingTurningWeldingSlitting

DesigningWater Treatment

PipeDrilling products

Pipe Fittings

Ph 1300 133 000


Ph 1300 133 000

Solving your Piping, Drilling and

Drainage Challenges

with Trust and Integrity

Casing thread solutions_16_9

Technology

Transcript of Casing thread solutions_16_9