CASE STUDY MATAMATA RETIREMENT VILLAGE
1
CASE STUDY MATAMATA RETIREMENT VILLAGE TRITON VAULT - DOUBLE STACK CIRTEX INDUSTRIES LTD PHONE +64 7 868 9909 FAX +64 7 868 3435 0800 CIRTEX (247 839) | [email protected] | WWW.CIRTEX.CO.NZ ® PROJECT This project is a quality greenfields development of a high density retirement village in Matamata. This installation was a 900m3 storage system and was stage 3, with stage 1 and 2 preceded this and comprised Triton S22 chambers. The Triton Vault system was designed for stormwater management for a total land area of 3900m3. DESIGN Cirtex worked closely with the Engineer during design stage and provided project concept designs to the Engineer for review. The footprint area was constrained so a double-stack system was proposed. Cirtex was present on site during installation to assist the contractor as this was the first double- stack system installed world-wide. INSTALLATION One of the key advantages of the Triton Vault system is the speed and ease of install. Cirtex was pleased to provide on site training to the contractor and the installation was completed efficiently and professionally in a timely manner. The products used provided the following benefits to the project: • Modular, highly configurable system, large volume to area ratio • Less drainage aggregate needed and Void ratio of 80-90% vs. 65% for S22 Chambers • Very strong, renewable soy-based resin construction - carbon neutral and able to be trafficked • Installation time savings due to installation methodology and less drainage aggregate required CONTRACTOR CAMEX ENGINEER Candor3 LOCATION Matamata, Waikato PRODUCTS USED Triton Vault System, DuraForce® Geotextile, DuraGrid
Transcript of CASE STUDY MATAMATA RETIREMENT VILLAGE
CASE STUDYMATAMATA RETIREMENT VILLAGETRITON VAULT - DOUBLE STACK
CIRTEX INDUSTRIES LTDPHONE +64 7 868 9909 FAX +64 7 868 3435
0800 CIRTEX (247 839) | [email protected] | WWW.CIRTEX.CO.NZ
®
PROJECTThis project is a quality greenfields development of a high density retirement village in Matamata. This installation was a 900m3 storage system and was stage 3, with stage 1 and 2 preceded this and comprised Triton S22 chambers. The Triton Vault system was designed for stormwater management for a total land area of 3900m3. DESIGNCirtex worked closely with the Engineer during design stage and provided project concept designs to the Engineer for review. The footprint area was constrained so a double-stack system was proposed. Cirtex was present on site during installation to assist the contractor as this was the first double-stack system installed world-wide.
INSTALLATIONOne of the key advantages of the Triton Vault system is the speed and ease of install. Cirtex was pleased to provide on site training to the contractor and the installation was completed efficiently and professionally in a timely manner.
The products used provided the following benefits to the project:• Modular, highly configurable system, large volume to area ratio• Less drainage aggregate needed and Void ratio of 80-90% vs. 65% for
S22 Chambers• Very strong, renewable soy-based resin construction - carbon neutral
and able to be trafficked• Installation time savings due to installation methodology and less
drainage aggregate required
CONTRACTOR CAMEX
ENGINEER Candor3
LOCATION Matamata, Waikato
PRODUCTS USED Triton Vault System, DuraForce® Geotextile, DuraGrid
