CARS AND TRANSPORTERS - Tekninen Kauppa

LIFTS 2016

LIFTSCARS AND TRANSPORTERS

HyperFlow

HyperFlowCOMPACT

®

HyperFlow® Technology

• HyperFlow® changes the way all future hydraulic lifts will be constructed

• HyperFlow® is the basis, for even more safety, due to simpler construction with fewer

parts leading to a longer life of the lift

• HyperFlow® is green, because it uses fewer resources

• A construction using HyperFlow® reduces the necessary raw material by up to 30%

• HyperFlow® protects not only the environment but also the purse

• Why ?

Because thanks to HyperFlow® NUSSBAUM can use fewer parts on the lifts providing an

almost wear free operation

• HyperFlow® is exclusive only by NUSSBAUM

DEVELOPED AND PATENTED BY NUSSBAUMMADE IN GERMANY

3

Automotive L i f tsfor passenger cars and transporters

SMART LIFT .................................................................. 4

POWER LIFT HL K .......................................................... 8

POWER LIFT HL ........................................................... 10

POWER LIFT HL SST & HDL SST .................................... 14

Accessories for SMART LIFT & POWER LIFT.................... 18

COMBI LIFT ................................................................ 20

UNI LIFT NT ................................................................ 24

UNI LIFT – Wheel alignment ........................................ 26

UNI LIFT – Testing ....................................................... 27

UNI LIFT 6000 & 8000 ................................................. 28

Accessories for COMBI LIFT & UNI LIFT ......................... 29

JUMBO LIFT ............................................................... 32

SPRINTER ................................................................... 36

TOP LIFT .................................................................... 40

TOP LIFT with lifting arms ........................................... 42

TOP LIFT with lifting platforms .................................... 43

TOP LIFT with runways ................................................ 44

We replace your old piston lifts ................................... 46

Automotive L i f ts for passenger cars & transporters

L i f ts for passenger cars & transporters

Nylatron-nut: 5 years warranty

Resistant Poly-V belt

MINI MAX lifting arms easy and convenient to lift off-road vehicles and for cars with pressed side skirts

SMART LIFT 2.30 SL – lift for vehicles up to VW T5 with short wheelbase

Vehicles’s door can be opened completely(2.30 SL DT)

Telescopic lifting arms and very low lifting point

SMART L IFTSPINDLE 2-POST LIFTS

SMART L IFT – THE RIGHT SOLUTION FOR ANY WORKSHOP

LIFTS FOR PASSENGER CARS AND TRANSPORTERS – FOR ALL TYPES OF

WORKS ARROUND THE CAR

SMART LIFT 2.30 SL – lifting capacity of 3.000kg,

available in versions: DT and MM

SMART LIFT 2.35 SL – lifting capacity of 3.500kg,

available in versions: DT, MM and SC

SMART LIFT 2.40 SL – with reinforced steel and extended lifting arms for

lifting vehicles up to Mercedes Sprinter with center wheelbase at the alter-

native pick-up points. With a lifting capacity of 4.000kg and UNIVERSAL

carrying arms.

SMART L IFT – THE PROVED TECHNOLOGY

The robust contruction of SMART LIFT as well as its fully developed tech-

nique are the results of more than 10.000 units produced per year and more

than 30 years experience in the manufacturing of lifts.

LONG LIFE- C YCLE

• low wear Nylatron-nut guarantees a quiet operation

• 5 years warranty on spindle and spindle-nut

• two motors integrated into columns

• resistant Poly-V belt – a guarantee for almost wearfree

• complete quality control at all stages

OPTION: ENERGY SET

• electricity and compressed air at the working place

• 230V plug and air connection are integrated in the column

5

www.nussbaum-group.de/smartlift

SMART L IFT – THE RIGHT SOLUTION FOR ANY WORKSHOP

3.000kg | 3.500kg | 4.000kg

SMART LIFT 2.30 SL DT – short lifting arm with 2-times telescopic provides more adjusta-ble range and simplifies lifting of shorter and wider vehicles

SMART LIFT 2.40 SL – lift for passenger cars and transporters, for universal application

Automatic locking of the arms

FLEXIBLE SET UP HEIGHT AND WIDTH

no ground connection between columns

Flexible top connection – adjustable height of top connection without static function

ASYMMETRIC LIFTING ARMS AND CARRIAGE FOR OPTIMAL DOOR CLEARANCE

• lifting wide range of vehicles

• automatic arm adjustment

• lowest pick-up point from 75mm

• short lifting arms with swivelling 180°

• maximum door clearance thanks to the corner position of the carriage

DOUBLE TELESCOPIC LIFTING ARM (DT)

The short lifting arm is 2-times telescopic, providing a large adjustable range and

therefore enabling to lift short and wide vehicles.

Extremely low construction of the carrying arms make this lift ideal for sports cars with

very low clearance.

MINI-MAX LIFTING ARM (MM)

Adapter for low clearance vehicles as well as for deep-drawn side skirt and off-road

vehicles. Adjustable with an enormous range of 75–185mm. Quick vertical multilevel ad-

justment with the foot.

A

BD

E

J

F

G

H


Foundation

Technical drawings for SMART L IFT

HYMAX S 3000 - 4000

Foundation

7

www.nussbaum-group.de/smartlift

Technical drawings for SMART L IFT

HYMAX S 3000 - 4000

SMART LIFT 2.30 SL 2.35 SL / 2.40 SL

TO BE PREPARED BY CUSTOMER

Foundation min. (mm) 200 200

Concrete quality min. (normal reinforcement) C20/25 C20/25

Bolts (pcs) 12 16

Type of bolt (depends on foundation, see manual)

Hilti-V-5.8, M12 Hilti-V-5.8, M12

Power supply (V / Hz / Amp.) 400 / 50 / 16 400 / 50 / 16

Time-lag fuse (mm²) 5 x 2,5 5 x 2,5

Air supply for energy set optional optional

Unloading (fork lift) required required

Technical data

SMART LIFT 2.30 SL 2.35 SL 2.40 SL

Lifting capacity (kg) 3000 3500 4000

Lifting/ lowering time approx. (sec) 40 / 40 46 / 40 46 / 40

Lifting height (mm) 1983 2010 2060Lowest pick-up point (mm) Version: SCVersion: MINI-MAX

D 95–140–

75–185

95–14082–12275-185

115–190–

75–185

Total height column (mm) Top connection (mm)

JA

28873716–4167

28903715–4115

28903685–4170

Total width (mm) Version: MINI-MAX

H 31003300

32303350

33503350

Drive-through width (mm) Version: MINI-MAX

E 23502504

24002400

25142514

Distance between columns (mm) Version: MINI-MAX

B 24602560

27702650

27702770

Arm extraction long (mm) Version: SCVersion: MINI-MAX

F 940–1495–

1000–1480

940–1495840–13801000-1480

1130–1840–

1130–1840

Arm extraction short (mm) Version: SCVersion: MINI-MAX

G 480–870–

600–980

570–1160590–865600-1000

570–1160–

635–1065

Motor (kW) 2 x 1,5 2 x 1,5 2 x 1,5

Power supply (V/Hz) 400 / 50 400 / 50 400 / 50



POWER L IFT HL 2.30 KHYDR AULIC T WO -POST L IFTS

POWER LIFT HL 2 .30 K – HYDR AULIC AT ALL EVENTS

FAST L IFT ING AND LOWERING TIMES

FUNC TION AND SAFET Y

• Combination of the single master / slave and HyperFlow

technology

• Equipped with 1 hydraulic cylinder in each column

• Safety is guaranteed through an integrated mechanical safety

ratchet

NEW

Automatic locking of lifting arm with finer gearing, manual releasing possible

NO FLOOR CONNECTION BETWEEN COLUMNS

POWER LIFT HL 2.30 K 2-post hydraulic lift with mechani-

cal latch and HyperFlow. Ideal for vehicles and vans up to

3000 kg.

FAST. FUNCTIONAL. RELIABLE.

HANGING HYDR AULIC C YLINDERS

• almost wear-free

• require less hydraulic oil

Telescopic asymmetric lifting arm Optimal door clearance – arrangement of lifting arms is always asymmetric

9

www.nussbaum-group.de/hlnt

HyperFlow

HyperFlowCOMPACT

®

HyperFlow TECHNOLOGY

• Automatic synchronization during operation.

• Automatic purging of the hydraulic system

during operation

3.000KG

POWER LIFT HL 2.30 K

Lifting capacity (kg) 3000

Lifting/ lowering time approx. (sec) 19 / 15

Lifting height (mm) 1990

Lowest lifting point (mm) 95–140

Clearance height (mm) 3967

Total height (mm) 4017

Total width (mm) 3100

Recommended installation width (mm) 3100

Drive-through width (mm) 2395

Distance between column (mm) 2630

Arm extraction long (mm) 945–1493

Arm extraction short (mm) 595–800

Power supply (V/Hz/A) 400/50/16

Motor (kW) 3

TECHNICAL DATA

TO BE PROVIDED BY CUSTOMER

POWER LIFT HL 2.30 K

Foundation min. (mm) 200

Concrete quality min. (normal reinforcement)

C20/25

Bolts (pcs) 12


Hilti-V-5.8, M12

Unloading (fork lift) required

Picture: column cover as

optional accessory

Telescopic lifting arms with minimum of lowest pick-up point



FUNC TION AND SAFET Y: NT TECHNOLOGY

• Crossed-cylinder master – slave system pro vides a level lifting

and lowering without the need for synchronization cables

• The load is secured at any working height without a mechanical

ratchet

• The all-hydraulic system requires no elec trical or pneumatic

components

• No crossbeam between the columns

• self-purging hydraulic system ensures an easy and safe installati-

on

• synchroniziation is made everytime at the top end position

• The integrated hydraulic oil-submerged motor ensures a quiet

operation

MINI MAX lifting arms – easy and convenient to lift lowered vehicles and for cars with pressed side skirts

POWER L IFT HL NTHYDR AULIC T WO -POST L IFTS

POWER LIFT HL NT – THE PROFESSIONAL SOLUTION FOR ANY WORKSHOP

POWER LIFT HL 2.30 NT – lift for passenger car up to transporter e.g. VW T5 with short wheelbase

Optimum door clearance with asymmetric lifting arm

Automatic locking of lifting arm with finer gearing, manual releasing possible

Scheme of NT-Technology

ACCESSORIES:

• energy set 230V power socket and air supply, integrated in the

column

• hight extensions

• diverse height adapters

FASTEST L IFT ING AND LOWERING

The double master slave system enables fast lifting and lowering

times, 20 and 14 sec respectively.

Low electricity consumption with one motor and no need of po-

wer supply when lowering.

NT TECHNOLOGY

Double hydraulic system replaces mechanical synchronization,

therefore no need of safety ratchet. The lift offers more operati-

on safety and is nearly wear-free.

Double cylinders pull loads from both sides constant and safe.

11


HyperFlow

HyperFlowCOMPACT

®


3.000KG | 3 .500KG | 4 .000KG | 5 .000KG

Short lifting arm with 2-times telescopic arms (DT) provide more adjustable range and simplifies lifting of shorter and wider vehicles

POWER LIFT HL 2.40 NT – Lift for passenger cars and transporter,s for universal application

ADJUSTABLE TOP CONNEC TION

Top connection is adjustable in height and width. Minimum

space is required with an optimal drive-through width. Height

extension including hydraulic hoses in 100mm steps increase

clear heigt from 4104 to 4904mm.

• Automatic synchronization during operation.

• Automatic purging of the hydraulic system during operation.

DOUBLE TELESCOPIC LIFTING ARMS (DT)

Short lifting arm with double telescopic provides a large adjustable range and therefore

enables to lift short and width vehicles.

MINI-MAX LIFTING ARM (MM)

Adapter for low clearance vehicles as well as for deep-drawn side skirt and off-road

vehicles. Adjustable with an enormous range of 75–185mm. Quick vertical multilevel adjust-

ment with the foot.

DOUBLE-JOINTED ARMS (DG)

Symmetric carrying arms of the 5 tons lift. Unique build with 2 joints enable the lifting of

heavy and wide vehicles, small cars and vans like the VW T5 with long wheelbase.

MB & BMW with telescopic arms and recommended installation width. Colors and coating

according to OEM specs. Specific scope of supply. Versions: 3500, 4000 and 5000.

SEVERAL VERSIONS FOR ALL NEEDS

HYMA X PH 3000 – lifting capacity of 3.000kg,

available in versions: DT and MM

HYMAX PH 3500 – lifting capacity of 3.500kg,

available in versions: DT, MM, SC and MB, BMW

HYMA X PH 4000 – lifting capacity of 4.000kg and UNIVERSAL carrying arms

HYMA X PH 5000 – lifting capacity of 5.000kg and symetric double jointed (DG) carrying arms

A

D

K

J

H

E

B

F

G

A

D

K

J

H

E

BF

G



Technical drawings for

POWER L IFT HL 2.30–2.50 NT

13


POWER LIFT HL 2.30 NT HL 2.35 NT/2.40 NT HL 2.50 NT

Additional scope of delivery ONLY for Mercedes Benz approved HDL 6500 SST DG MB

Document holder on column | Magnetic basket for wheel nuts | Height adaptersfor Sprinter and for G model with and without running-board | Integrated

CE Stop with acoustic warning signal


Foundation min. (mm) 200 200 200


C20/25 C20/25 C20/25

Bolts (pcs) 12 16 16Type of bolt (depends on foundation, see manual)

Hilti-V-5.8, M12 Hilti-V-5.8, M12 Hilti-V-5.8, M16

Air supply for energy set optional optional inkl.

Unloading (fork lift) required required required

Hydraulic oil HLP ISO 32, approx. 10 liter HLP ISO 32, approx. 10 liter HLP ISO 32, approx. 10 liter

POWER LIFT HL 2.30 NT HL 2.35 NT HL 2.40 NT HL 2.50 NT

Lifting capacity (kg) 3000 3500 4000 5000

Lifting/ lowering time approx. (sec) 20 / 14 26 / 14 26 / 14 31 / 15

Lifting height (mm) K 1995 1995 2050 2020

Lowest lifting point (mm)Version: MINI-MAXVersion: UniversalVersion: MBVersion: SC

D 95–14075–185

–––

95–14075-185

–95-14082-122

95–14075–185115–19095–140

–

115–190––––

Total height column (mm) J 4022 4040 4027 3962

Total height with riser pipe (mm) A 4104–4904 4109–4909 4109–4909 4109–4865

Total width (mm) Version: MINI-MAXVersion: BMWVersion: MB

H 3100–33003100–3350

––

3230–3350335032303230

3350––

3350

3750––

3750

Recommended width (mm)Version: MINI-MAXVersion: BMWVersion: MB

31003100

––

3230335032303230

3350––

3350

3750––

3750

Drive-through width (mm) Version: MINI-MAXVersion: BMWVersion: MB

E 2313–25132504

––

2400–2520–

24002400

2522––

2522

2790––

2790

Column distance (mm) Version: MINI-MAX

B 2560–27602760

26462766

2766–

3090–

Arm extraction long (mm) Version: MINI-MAXVersion: UniversalVersion: BMWVersion: MBVersion: SC

F940–1495

1000–1480––––

940–14951000-480

–505–823505–823840–1380

1130–1840–

570–1160–

1130–1840–

778–1213–––

0–1825–

Arm extraction short (mm) Version: MINI-MAXVersion: BMWVersion: MBVersion: SC

G 480–870600–980

–––

570–1160600-900505–823505–823590–865

600–900635–1065

–600–900

–

778–1213––

0–1825–

Power supply (V/Hz/A) 400/50/16 400/50/16 400/50/16 400/50/16


Technical data



POWER L IFT HL SST & HDL SST

Hydraulic l i f t with elec tronic synchronization ensures safety in any l if t ing

height without safety ratchet

SST – SAFETY STAR TECHNOLOGY

• patented safety system

• interaction with a micro-controller and proportional valves, SST guarantees perfect synchronization

• Electronical measuring system at ball bearing circulation controls the synchronization of lifting

unit exactly to tenth of a millimeter

DOUBLE-JOINTED ARMS

Unique construction with double-jointed per lifting arm for

• reaching 100% of pick-up points

• easy lifting of passenger cars through 90° of lifting arms positioning

• required pick-up points from car‘s manufacture will be reached safely

POWER LIFT HL 2 .60 SST DG

• lift for transporter with maximum

power reserve

• a control unit with oil-submerged

motor is supplied by SST cylinders

• self-purging system for the hydraulic

circuit

POWER LIFT HDL 6500 SST DG

POWER LIFT HDL 8000 SST DG

• absolute safety through Safety

Star Technology

• two control units with oil-submerged

motor are supplied by SST cylinders

• no floor connection

• double-jointed arms

• fast lifting and lowering times

• low maintenance and nearly

wear-free hydraulic cylinders

HYDR AULIC T WO -POST L IFTS

15

6.000KG | 6 .500KG | 8 .000KG

www.nussbaum-group.de/hl-sst-dg

OPTION: MINI-MAX ADAPTER

for HDL 6500 SST & HDL 8000 SST

Adapter for low clearance vehicles as well as

for deep-drawn side skirt and off-road vehicles:

• enormous adjustable range of 75–185mm

• multilevel quick adjustment

• operation by foot

• lifting capacity of the MINI-MAX adapter is reduced

to 4200kg

POWER LIFT HDL 6500 SST DG MB

approved version by Daimler. Double

jointed arms, special anticorrosive coa-

ting and several accessories as standard

scope fo supply.

H

E

F

G



Technical drawings for POWER L IFT

HL 2.50–2.60 SST & HDL 6500–8000 SST

Drawing for POWER LIFT HL 2.60 SST double-jointed arms &POWER LIFT HDL 6500 / 8000 SST double-jointed arms

17

www.nussbaum-group.de/hl-sst-dg

POWER LIFT HL 2.60 SST DG HDL 6500 / 8000 SST DG

Additional scope of delivery ONLY for Mercedes Benz approved

HDL 6500 SST DG MB

Document holder on column | Magnetic basket for wheel nuts | Height adaptersfor Sprinter and for G model with and without running-board | Integrated

CE Stop with acoustic warning signal


Foundation min. (mm) 250 250

Concrete quality min. (normal reinforcement) C20/25 C20/25

Bolts (pcs) 14 20


Hilti-V-5.8, M16 Hilti-V-5.8, M16

Air supply for energy set incl. incl.

Unloading (fork lift) required required

Hydraulic oil HLP ISO 32, approx. 17 liter per power unit HLP ISO 32, approx. 17 liter per power unit

POWER LIFT HL 2.60 SST DG HDL 6500 SST DG HDL 8000 SST DG


Lifting/ lowering time approx. (sec) 65 / 65 70 / 55 70 / 55

Lifting height (mm) 2015 2150 2150

Lowest lifting point (mm)Version: Mini-Max

D 140–215115–190

170–240–

170–240–

Total height column (mm)Version: DG

J 4674–51244640–5090

3035–

3035–

Total width (mm) Version: DG

H 37504210

3570 (4370)–

3570 (4370)–

Drive-through width (mm) Version: DG

E 27602510

2376/2350–

2376/2350–

Column distance (mm) Version: DG

B 30602810

2766/2780–

2766/2780–

Arm extraction long (mm) Version: DG

F 931–18910–1890

1789/1834–

1789/1834–

Arm extraction short (mm) Version: DG

G 931–18910–1890

1789/1834–

1789/1834–

Power supply (V/Hz/A) 400/50/16 400/50/16 400/50/16

Motor (kW) 1,5 2 x 1,5 2 x 1,5


Technical data



HEIGHT ADAPTERS

235TTKAS08873 · Height adap-ters for MB offroad vehicles GW 460/ 463 · adjustable 160 – 275 mm · set = 4 units

235TTKAS08850 · Height adapters for Sprinter (NCV3) with prism for rear pick-up point, adjustable 225–330 mm, set = 2 units

235TTKAS08837 · Height adap-ters for MB 100, adjustable 150 – 255 mm, set = 4 units

225SL08300 · Height adapter for the universal application · fixed 44mm · ø 120 mm · set = 4 units

Adjustable height adapters for universal application with ø 120 mm · set = 4 units

232SEL48593 · 154 – 245 mm232SEL48530 · 190 – 280 mm232SEL48560 · 239– 330 mm

232SL08610 · Height adapter for MB offroads GW 460/463 with footboard · fixed 145 mm · set = 4 units

Height adapter with U-profile for commercial vans at vehicle‘s frames – the U-Profile locks the vehicle · set = 4 units

232SL08850 · Adjustable range of 150 – 230 mm

232SEL48258 · Height adapter with prisms adapter, special for MB100 and similar use · fixed 145 mm · set = 4 units

Vehicle‘s frames – the U-Profile locks the vehicle · set = 4 units

250SL08130S · Adjustable range from 184–278 mm

235TTKAS08870 · Height adapters for Sprinter (NCV3) with positioning pin for front pick-up point, adjustable 230–335 mm, set = 2 units

used with...

Height adapters for Ford Mondeo ST 220, set = 2 units

250HDL28063 · Fixed height adapter for decreasing of lowest lifting point of approx. 15 cm · ø 120 mm · set = 4 units

232SL08840 · Adapter for frameadjustable for offroad vehicles and commercial vans · set = 2 units

232HEL48081 · Fixed height adapters for the universal appli-cation · fixed 151mm · ø 120mm · set = 4 units.

Adjustable height adapter for theuniversal application with ø 120 mm · set = 4 units

235TTKAS08501 · 115–220 mm235TTKAS08809 · 231–335 mm

Accessor ies for SMART L IFT & POWER L IFTACCESSORIES FOR TWO-POST LIFTS

FURTHER ACCESSORIES

Energy-set – optional integrated in the control or opposite column – and pneumatic tool support, screwed on column

Holder for height adapters

Screw tray galvanized – is inserted into the bracket of long arm, set = 2 units

Safety adapter for A-class is mounted under the vehicle in the traverse direction and prevents tilting of the vehicle by removing of equipment assembly

19

MINI-MAX – THE COMFORTABLE WORKSHOP ASSISTANT

further accessories on www.nussbaum-group.de/accessory

• height adjustable turntable

• for vehicles with low clearance as well

as for deep-drawn side skirt and off-

road vehicles

• quick adjustment of turntable

• enormous adjustable range

• multilevel grid quick adjustment

through pedal guarantees reliable and

comfortable positioning of lifting arms

• vehicle can be lifted higher by

reduction of no-load stroke

L I F T ING CAPACIT Y (KG) SMART L I F T POWER L I F T

3000 2.30 SL MM HL 2.30 NT MM

3500 2.35 SL MM HL 2.35 NT MM

6000 HL 2.60 SST DG

6500 HDL 6500 SST *

8000 HDL 8000 SST *

* with MINI-MAX-Adapter

www.nussbaum-group.de/accessory

MINI-MAX ADAPTER

• Mini Max adapter offers convenience

and safety by lifting passenger cars

• Mini Max adapter reduces the lifting

capacity of HDL 6500 SST and 8000 SST

to 4,200 kg



COMBI L IFTHYDRAULIC FOUR-POST LIFTS FOR PASSENGER CARS AND TRANSPORTERS

COMBI LIFT 4.40 S, 4.50 H, 4.65 H

& 4.80 H

• Powered by one hydraulic cylinder

under the runway and 4 steel ropes

• High capacity power unit with sub-

merged motor installed at the control

column.

• Control panel with push-button.

• Very flat runways with short access

ramps spare space in the workshop

• Adjustable runways width during the

installation to different car‘s track

width.

COMBI L IFT – FLEXIBLE FOR ANY APPLIC ATION ; REPAIR , T IRE SERVICE AND WHEEL ALIGNMENT

Filling boxes make runway as one level

The new generation of sliding plate convinces through its stability and free movement in cross direction, each 45mm left and right

Optional: turntables for wheel align-ment

Wheel-free lift with HyperFlow® Technology – length extendable in both sides from 1500–1900mm

ROBUST, MULTIFUNCTIONAL, POWERFUL

PERFECT FOR RELIABLE WHEEL ALIGNMENT

• High precision wheel alignment in every locking height thanks to the

adjustable latch strip with 100mm grid.

• The runways can be engaged in the next ratchet per push-button.

So called flat plates bring the runways with sliding plates and with or

without free wheel lift to a flat surface. Flat plates lay on the runways

without screws.

• Slip plates are mounted on roller bearings for an optimal strainless wheels

for the wheel alignment: sidewise +/- 50mm / lengthwise +/-1,5°.

VERSIONS

• flat runway

• PLUS – runway with wheel-free lift

• AMS – runway with mounted on

wheel alignment set

• PLUS AMS – runway with wheel-free

lift and wheel alignment set

21

4.000KG | 5.000KG | 6.500KG | 8.000KG

www.nussbaum-group.de/combilift

VARIOUS EQUIPMENT

OPTIONS

• JACK 2000 | JACK 2500 – air hydraulic axle jack

• LASER JACK – pneumatic axle jack

• Pneumatic joint play detector

• Lighting along the runway

Approved by Merces Benz and BMW for 4.50 SL

WHEEL-FREE LIFT (VERSION PLUS)

• Wheel-free lift, optional with

adjustable length of platform

• Lifting capacity 2500 - 3500kg

• Available in different lifting height

• Can be combined with wheel

alignment set

• Available for all models up to

COMBI LIFT 4.65 H

JOINT PLAY DETECTOR

• Joint play detector at the end of the runways

• One-man control with the button integrated in

the handel of the hand lamp

• For models up to COMBI LIFT 4.65 H

A

B

C

D

E

F

G

H

J



Technical drawings for COMBI L IFT

Quality of concretemin. C20/25

Fixed runway

Lighting (optional)

Adjustable runway

drive in direction

23

www.nussbaum-group.de/combilift

Technical drawings for COMBI L IFT

COMBI LIFT 4.40 S 4.50 H 4.65 H 4.80 H

Foundation min. (mm) 160 250 160 X


min. C20/25 min. C20/25 min. C20/25 min. C20/25

Bolts (pcs) 16 16 16 16


Hilti-V-5.8, M10 Hilti-V-5.8, M10 Hilti-V-5.8, M10 Hilti-V-5.8, M10

Hydraulic oil HLP ISO 32 (liters) 10 10 10 17

Power supply (V / Hz / Amp.) 400 / 50 / 16 400 / 50 / 16 400 / 50 / 16 400 / 50 / 16

Time-lag fuse (mm²) 5 x 2,5 5 x 2,5 5 x 2,5 5 x 2,5

Unloading (fork lift) required required required required

TO BE PROVIDED BY CUSTOMER

Technical data

COMBI LIFT 4.40 S 4.50 H 4.65 H 4.80 H

Lifting capacity (kg) 4000 5000 6500 8000Lifting capacity WFH (kg) version: Plus & Plus AMS

3000 3500 3500 –

Lifting capacity JACK (kg) 2000 2500 2500 5000

Lifting/ lowering time approx. (sec) 40 / 35 35 / 35 41 / 36 45 / 30

Lifting/ lowering time WFL (sec) version: Plus & Plus AMS

15 / 5 12 / 8 12 / 8 –

Lifting height (mm) A 1976 1935 1980 1800

Lifting height AMS (mm) version: AMS & Plus AMS

2008 2030 2030 –

Lifting height WFL (mm) version: Plus & Plus AMS

525 440 440 –

Runway length (mm)Usable runway length (mm)

B 48304600

5540–

5540–

6000–

Runway width (mm) C 500 670 670 670

Distance between columns (mm) D 834–984 830–930 830–930 –Platform length WFL (mm) version: Plus & Plus AMS

1530–1900 1550–1900 1550–1900 –

Drive-on height (mm) E 160 190 190 217Drive-on height AMS (mm) version: Plus & Plus AMS

210 240 240 –

Drive-on height AMS (mm) version: Plus & Plus AMS

50 68 68 –

Drive-on height WFL (mm) version: Plus & Plus AMS

J 1000 1250 1250 1250

Total height column (mm) F 2162 2320 2320 2328

Total length (mm) G 5950 6965 6965 7570

Total width (mm) H 3260 3540 3540 3550

Motor (kW) 3,0 3,0 3,0 3,0

Power supply (V/Hz) 400 / 50 400 / 50 400 / 50 400 / 50



Hydraulic scissor lift with two independent hydraulic circuits.

UNI L IFT NT

FUNCTIONALITY & SAFETY – NT TECHNOLOGY

• Redundant hydraulic system with two independent

hydraulic circuits

• Powerful, quiet and long lasting oil-submerged motor

VERSIONS

• AMS – wheel alignment set with rear

sliding plates and flat plates with recess

for turning tables. Additional pneumatic

mechanical latch for alignment purpos

• PLUS – flat runways with wheel-free lift

• PLUS AMS – runway with wheel-free lift

and wheel alignment set

HYDRAULIC SCISSOR LIFT

UNI LIFT 3500 & 5000 NT

• Thanks to the redundant hydraulic system

no safety mechanic latch is necessary.

• R-strong build with low profile runways

and short access ramps save space in the

workshop.

• No hard connection between the runways.

More comfort and safety.

• Easy to install, 2 version above ground or

flushed installation.

• Powerful hydraulic unit with oil submer-

ged motor.

• Sliding blocks made from synthetic materi-

al glide on stainles steel guides and ensure

quite operation and almost wear free

mechanism.

UNI LIFT 3500 & 5000 NT UNI LIFT 3500 & 5000 NT PLUS, in-ground installationUNI LIFT 3500 & 5000 NT PLUS AMS with axel JACK, above-ground installation

UNI L IFT NT – THE PROFESSIONAL SOLUTION FOR ANY WORKSHOP

25

3.500KG | 5.000KG

www.nussbaum-group.de/unilift

VARIOUS OPTIONS AVAILABLE

• JACK 2000 / 2500 - air hydraulic axle jack

• LASER JACK – pneumatic axle jack

• Joint Play Detector

• lighting along the runways

• extensions for the runways

WHEEL-FREE LIFT (PLUS VERSION)

• Wheel-free lift, optional with adjustable length of

platform

• Lifting capacity 3500kg

• Available in different lifting heights

• Can be combined with wheel alignment set

Runway profile. Optional OXIGEN CARE. Wheel-free lift with adjustable platformRear sliding plate

PERFECT FOR RELIABLE WHEEL ALIGNMENT

• High precision wheel alignment in every locking height

thanks to the adjustable latch strip.

• The runways can be engaged in the next ratchet per

push-button.

• So called flat plates bring the runways with sliding plates

and with or without free wheel lift to a flat surface. Flat

plates lay on the runways without screws.

• Slip plates are mounted on roller bearings for an opti-

mal strainless wheels for the wheel alignment: sidewise

+/- 50mm / lengthwise +/-1,5°.

SURFACE TREATMENTS:

Powder coated, fire galvanized, OXYGEN care



UNI L IFT Wheel Al ignment ProHYDRAULIC SCISSOR LIFT FOR WHEEL ALIGNMENT

The high requirements for an accurate wheel alignment is also a challenge for the alignment lift.

The UNI LIFT with its unique technology is the answer to these demands.

UNI LIFT 5500 QUATTTO AMS PRO

• wear-free kinematic, without deflection lever

• adjustable wheel-free lift for smart up to S-class

• runway length: 5200 mm

FUNCTIONALITY & SAFETY

• 4 cylinders provide permanent security in any lifting height

through patented safety system SST

• Electronic controlled synchronization through proportional valve

technique

Wheel-free lift Turntable with flat plates on one levelExtented drive-on ramps

• for wheel alignment of modern vehi-

cles: accuracy ± 0,5 mm right / left ± 1

mm front / rear or diagonal

• precise wheel alignment and perma-

nent repeatable measuring data

• very compact and low construction

with short access ramps, ideal also for

low clearance vehicles

• no fixed connection between the

runways

HYMA X X – HYDRAULIC SCISSOR LIFT FOR WHEEL ALIGNMENT

27

UNI L IFT Test ProHYDRAULIC SCISSOR LIFT FOR FAST INSPECTION

UNI L IFT 4000 NT QUATTRO &

UNI L IFT 5000 NT QUATTRO

• with integrated lengthwise adjustable

wheel-free lift

• pneumatic play detector with hand-lamp,

cable or remote control

• a silent, powerful control unit is integrated

into a canister foundation between the

runways

• runway lengths: 4500 mm (UNI L IFT 4000

NT QUATTRO) or 5000 mm (UNI L IFT 5000

NT QUATTRO)

• the lift is intended for in-ground instal-

lation – optional with accessible working

platform for canister foundation.

• vertical roll-off protector integrated in

runways

• optional: floor compensation for axle jack

The specialists for fast and efficient inspection processes.

FUNCTIONALITY & SAFETY

Redundant hydraulic system with two independent

hydraulic circuits ensures synchronization and security.

Joint play detector Axle jack LASER JACKRoll-off protection - integrated in runway

HYMA X X – HYDRAULIC SCISSOR LIFTS FOR TRANSPORTER AND SMALL TRUCK


UNI LIFT 6000 & 8000

• Space-saving, hydraulic scissor lift

with lifting capacity of 6.000 kg and

8.000 kg

• Equipped with flat runways, ideal to

lift transporters up to light trucks

• No fixed connection between the

scissors

• Low construction height allows an

easy drive-on without long drive-on

ramps

• Installation above ground with til-

ting flaps or flushed installation with

access ramps bolted to the floor.

FUNCTIONALITY AND SAFETY

• Approved master / slave system guarantees the synchronization of both

scissors units.

• Mechanical latches serve as security device.

• High performance oil-submerged power unit ensures a quiet operation

and short lifting and lowering times.

UNI L IFT 6000 & 8000 – HYDRAULIC SCISSOR LIFTS FOR TRANSPORTERS AND LIGHT TRUCKS

Compact construction height Low drive-on height - easy to drive-on No fixed connection between the scissors

UNI L IFT 6000 & 8000HYDRAULIC SCISSOR LIFTS FOR TRANSPORTERS AND LIGHT TRUCKS

OPTIONS AND ACCESSORIES:

• Runway length: 5500 mm (standard)

• Fully galvanized lift including galva-

nized runways

• Lighting with 4 flourescent lamps,

integrated in the runways

• Middle point lifter

• JACK 2000 – air hydraulic axle jack

• JACK 2500 – air hydraulic axle jack

(for UNI LIFT 8000)

• Extention of hydraulic hose

29

www.nussbaum-group.de/accessories

JOINT PLAY DETECTOR

• Installed at the end of runways

• One-hand-operation by halogen lamp with integrated push

button, cable connected or radio control (optional)

JACK 2000 · JACK 2500

• Air hydraulic axle jack

• Universal lifting at outer pick-up

points without spring relieving,

or in the middle

• Movable along the runways

• Extendable lifting arms

• With mechanical safety ratchets in

2 heights

• Min. air pressure 6 bar

JACK 2000 2500 L ASER JACK Lifting capacity (kg) 2000 2500 2000

Lifting height (mm) 370 270 270

Lifting time (sec.) 35 35 20

Lowering time (sec.) 7 7 15

Arm extraction (mm) 800–1640 810–1760 690–1495

Motor (kW) – – 1,5

Power supply (WHz) – – 400/50

Further accessories on www.nussbaum-group.de/accessories

Flat plates installation cassette Optional with park position for axle jack

Vertical roll-off protectors for in-ground installation

Accessor ies for COMBI L IFT & UNI L IFTACCESSORIES FOR FOUR-POST LIFT AND SCISSOR LIFT

LASER JACK

• Pneumatic axle jack

• Lift vehicle at outer pick-up

points of axis

• Movable along the runways

• Extendable lifting arms

• Min. air pressure 6 bar

ACCESSORIES FOR FOUR-POST LIFT AND SCISSOR LIFT

JACK 2000

JACK 2500

LASER JACK

A

B

C

D

E

F

G



Technical drawings for UNI L IFT

wheel-free lift

sliding plate

drive in directionturntable

operating unit

31

www.nussbaum-group.de/unilift


UNI LIFT 3500 NT 5000 NT5500

AMS PRO4000 NT

QUATTRO5000 NT

QUATTRO6000 8000

Concrete quality min. C20/25

Bolt (pcs) 12 12 20 16 16 12

Hydraulic oil HLP ISO 32

Type of bolt (depends on foundation, as described in manual) Hilti-V-5.8, M12

Hydraulic oil (liter) approx. 13 approx. 14 approx. 10 approx. 16 approx. 42 approx. 10

Time-lag fuse 5 x 2,5 mm²

Power supply 400V / 50 Hz / 16 Amp.


* for version: PLUS | PLUS AMS ** AMS = mounted-on wheel alignment set

Technical data

UNI L I F T3500

NT5000

NT5500

AMS PRO4000 NT

QUAT TRO5000 NT

QUAT TRO6000 8000

Lifting capacity (kg) version: PLUS | PLUS AMS

40003500

50005000

5000 4000 5000 6000 8000

Lifting capacity wheel-free lift (kg) * 3500 3500 3500 3500 3500 –

Lifting/ lowering time approx. (sec.) 35/29 31/19 31/25 26/26 27/19 40/40

Lifting height (mm) A 1920 1920 1940 2090 2090 1927

Lifting height WFL (kg)version: PLUS

B 580530

580530

––

500–

532–

––

Runway width (mm) C 635 635 635 610 610 788

Runway length (mm) D 4500 5000 5200 4500 5000 5500

Platform length wheel-free lift (mm) E 1485–1945 1485–1945 – 1471–2147 1459–1937 –

Drive-on height runway (mm)Drive-on height wheel-free lift (mm)Drive-on height AMS (mm)

F 195+50+18

195+50+18

220+50

–

220––

225––

–215–

Total length above-ground (mm) G61556355

6655 6275 4610 5122 7160

Total width (mm) 2120 2170 2290 2120 2080 2340

Motor (kW) 3,0 3,0 3,0 2 x 3,0 2 x 3,0 3,0

Power supply (V/Hz) 400/50 400/50 400/50 400/50 400/50 400/50

1460mm

2160mm (2060mm*)



MA XIMUM LIFT ING HEIGHT

effective lifting stroke of 2000 mm – enough space

under the vehicle, also for in-ground installation

JUMBO LIFTHYDRAULIC DOUBLE-SCISSOR LIFTS

FREE ACCESS

between the scissors, there is no mechanical

connection between platforms

SAFE AND FLEXIBLE PL ATFORM

easy to extend through lengthwise adjustable

lifting platform for picking up a wide range of

vehicles

L IFT ING OF VITO, V IVARO UP TO V W T5 WITH

SHORT WHEEL BASE

Follow the trend for workshops – lifting heavy vehicles such

as SUVs, 4-wheel vehicles up to VW T5 with short wheel base

and comparable.

VW UP

JUMBO LIFT – THE RIGHT SOLUTION FOR ANY WORKSHOP

JUMBO LIFT 3200 NT – For vehicles up to VW T4 with short wheel base and similar vehicles. Above-ground installation only.

33

3.200KG | 3.500KG | 4.000KG

www.nussbaum-group.de/jumbolift

HyperFlow

HyperFlowCOMPACT

®

JUMBO LIFT – THE RIGHT SOLUTION FOR ANY WORKSHOP

JUMBO LIFT 3500 NT – lifting from VW Up up to VW T5 with short wheelbase without a problem

NT TECHNOLOGY = PERFEC T & SMOOTH

RUNNING POWERFUL , SAFE, STEADY

the redundant fully hydraulic system guarantees maximum

operating safety through using two independent

hydraulic circuits

LONG LIFE, THANKS TO FULLY HYDR AULIC SYSTEM

• no need of safety ratchet

• no electrical and pneumatic components at the lift

Special color extra charge

LONG LIFEC YCLE & STABLE

• lubricating nipples at the bolts provide an easy

maintenance and secure a long lifecycle

• high quality steel construction ensures directional

stability


• the synchronization is automatically set / adjusted at all

times during operation

• automatic purging of the hydraulic system during

operation

JUMBO LIFT 4000 NT – lifting vehicles from VW T5 with short wheelbase and similar vehicles | In-ground installation

Flaps to increase the length of the ramps, easy to lock and unlock with one hand

FL AT CONSTRUC TION

low construction height enables an above-ground installati-

on and driving-on, even with low clearance vehicles

A

B

C

D

E



Technical drawings for JUMBO LIFT

A

B

C

D

E

drive in direction

cable channel

35

www.nussbaum-group.de/jumbolift

THE R IGHT ACCESSORIES – THE PERFECT SOLUT ION FOR EVERY APPL ICAT ION... 3200 3500 4000

Truncated pyramid pad • • •

Polymer pad 50 x 150 x 340mm • • •

Polymer pad 100 x 150 x 340mm • • •

Tuning ramps for low or sports cars, set = 4 units • • –

CE-Stop for in-ground installation (standard equipment) – – •

OPT ION : SUFR ACE TREAT ING

Oxygen care coated for corrosive environment (dark grey) • • •


JUMBO LIFT 3200 NT / 3500 NT / 4000 NT

Foundation min. (mm) 160

Concrete quality min. (normal reinforcement) min. C20/25

Bolts (pcs) 12


Hilti-V-5.8, M10

Hydraulic oil HLP ISO 32 (liters) approx. 13

Power supply (V / Hz / Amp.) 400 / 50 / 16

Time-lag fuse (mm²) 5 x 2,5


Technical data

JUMBO L I F T 3200 NT 3500 NT 4000 NT


Lifting time approx. (sec) 36 36 36

Lifting height (mm) A 2000 2000 2000

Drive-on height (mm) B 105 105 –

Installation depth (mm) B 105 105 135

Total width (mm) C 2020 2020 2020

Platform width (mm) D 610 610 610

Platform length (mm) E 1460 – 2060 1460 – 2160 1460 – 2160

Motor (kW) 3,0 3,0 3,0

Power supply (V/Hz) 400/50 400/50 400/50



ADDITIONAL WORKING SPACE

An additional working space in your work-

shop for fast working at any vehicle. The

midrise sprinter mobil is an efficient and

mobile solution for tire service, painting

and body work.

• Lifting height approx. 1000mm

• Anti -skid lifting platforms are galvanized

and lengthwise adjustable

SPRINTER mobil 2500

SPRINTER MIDRISE LIFT

SPRINTER MOBIL – YOUR ADDITIONAL WORKING SPACE

MAXIMUM FLEXIBILITY

can be installed without screws

on almost every flat and solid

surface

MOBIL-SET ( OPTIONAL)

can be moved without any problem

with Mobile-Set

Flaps to increase the length of the ramps, easy to lock and unlock with one hand

37

2.500KG | 3.000KG

www.nussbaum-group.de/sprinter

SPRINTER mobil 3000

FULLY HYDRAULIC SYSTEM

the hydraulic system of the lift works with two indepen-

dent cylinders. A special safety device in the hydraulic

circuit substitutes the conventional security latches and

protects the lift from sagging. The mechanic synchroni-

zation is done by torsion bars at the bottom of the lift.

SOLID STEEL CONSTRUC TION

HIGH-PERFORMANCE POWER UNIT

the high-performance oil-submerged motor in the power

unit with push buttons guarantees short lifting and lowering

times.

FAST AND EASY TO SET UP

the lift is fully assembled at the factory and tested.

To set up the lift, it will be unpacked, only filled with

hydraulic oil and connected to a suitable electrical

connection.

A

B

CC

D

D

E

E



Technical drawings SPRINTER

X: vehicle with front engine

XX: vehicle with rear engine

39

www.nussbaum-group.de/sprinter

OPT IONS & ACCESSORY

Fire galvanization of scissors and base plate for corrosive environment

Polymer pads • 50 x 150 x 340mm

Polymer pads • 100 x 150 x 340mm

Truncated pyramid pad

Tuning ramps for low or sports cars, set = 4 units

SPR INTER MOBIL 2500 3000

Bolts (pcs) 8 bolts when the lift should be fix installed

Type of bolt (depends on foundation, see manual) Hilti-V-5.8, M10

Hydraulic oil HLP 32 (liters) approx. 8

Power supply (V / Hz / Amp.) 400 / 50 / 16

Time-lag fuse (mm²) 5 x 2,5



Technical data

SPRINTER MOBIL 2500 3000

Lifting capacity (kg) 2500 3000

Lifting time approx. (sec) 11 11

Lifting height (mm) A 980 980

Drive-on height (mm) B 102 102

Total width (mm) C 1910 1910

Platform width (mm) D 450 450

Platform length (mm) E 1400 – 2010 1400 – 2010

Motor (kW) 1,5 1,5

Power supply (V/ Hz) 400/50/16 400/50/16



TOP L IFT

1-PISTON IN-GROUND LIFT

• 1-piston lift with external power unit

• Separated control panel can be installed up to 5 m away from the lift

X-LIFTING ARMS

• Fire galvanized, 2-times

telescopic lifting arms

• Vehicle will be lifted at

pick-up points,

therefore sillboard is acces-

sible

• Wide range of height adap-

ters available

www.nussbaum-group.de/

accessory

H-LIFTING PLATFORM

• Fire galvanized, lengthwise

adjustable lifting platform

for picking up vehicles at

sillboard

• Fast and simple to drive-on

for a wide range of vehicles

DRIVE TECHNOLOGY:

• Hydraulic unit with oil-sub-

merged motor integrated in

cannister

• A crossbeam secures syn-

chronization and prevents

rotation of the platform

• Screwed, corrosion resistant

hydraulic pipes from hy-

draulic unit to the cylinders

(no loose flexible hoses)

• Cylinders are protected

inside the hard chromed

guiding pipes

TOP L I F T 1.35 H X

Lifting capacity (kg) 3500 3500

Lifting height (mm) 1975 2064

Lifting/ lowering time (sec.) 40/35 40/35

Piston diameter (mm) 140 140

Arm extraction (mm) — 630–1235

Lowest pick-up point (mm) — 95

Platform length (mm) 1400–1900 —

Drive-on height (mm) 60 —

Installation depth (mm) 2520 2520

Motor (kW) 3 3

Power supply (V/Hz) 400/50 400/50

41

www.nussbaum-group.de/toplift

YOUR WORKSHOP IN AN ATTRACTIVE APPEARANCE

WITH

• 2-piston lift with lifting arms,

lifting platform and runways up to 8t

WITH DIFFERENT INSTALLATION VARIATIONS

• TS – 2,50m installation depth

• TTL NT – 1,75m installation depth

TS – HYDRAULIC MECHANICAL

• Cassette with mechanical crossbeam

• Synchronization is ensured by a mechanical connec-

tion of the pistons

• Crossbeam ensures synchronization of the piston and

has an anti-twist function.

• Installation depth: 2,50m

THE LIFTING PISTON

• Hydraulic cylinders are integrated in guiding pipe and are

treated against corrosion with a chromium coating

• Hard piping instead of flexible tubes ensures a long-life and

low maintenance

TTL NT TECHNOLOGY

• Redundant hydraulic system with two independent hydraulic circuits.

• No mechanical latch is necessary. Few wear-out and disruptive parts.

• No crossbeam between cylinders is necessary

• The two single pistons ease the installation

• Hydraulic pump is fixed to one of the cylinders

• Emergency lowering is possible from outside with compressed air

• Lifting height 2m

• Telescopic pistons for a reduced installation depth max. 1,75m

TOP L IFT2-PISTON IN-GROUND LIFT


2.35 TSK 2.35 T TL K NT 2.50 T TK AS 2.50 T TL K NT

TOP L I F T STD DG MM STD DG MM DG DG

Lifting capacity (kg) 3500 3500 3500 3500 3200 3500 5000 5000

Lifting height (mm) 2070 2050 2070 2085 2085 2085 1990 2085

Lifting/ lowering time (sec.) 30/30 30/30 30/30 20/20 20/20 20/20 43/32 45/27

Piston diameter (mm) 140 140 140 172, 140 172, 140 172, 140 160 172, 140

Distance between pistons (mm)

2200 2200 2200 variabel variabel variabel 2600 variabel

Arms extraction (mm) 595–987 0 – 1789 595–987 595–1160 0–1789 618–943 0–1790 0–1790

Lowest pick-up point (mm) 83–120 115 – 190 75 – 185 115–190 115–190 75 – 185 115–190 115–190

Installation depth (mm) 2493 2493 2493 1463 1463 1463 2350 1463

Motor (kW) 3 3 3 3 3 3 3 3

Power supply (V/Hz) 400/50 400/50 400/50 400/50 400/50 400/50 400/50 400/50

*1 Mini Max-arm: 75–185mm

• Sillboard remains free

• Flexibility for working at a wide range of vehicles from small cars to vans

and off-road vehicles

• Ideal for most of the works around the vehicle: body works, demounting

big components, working with vans and small trucks, etc.

STANDARD (STD)

• Powder coated 2-times telescopic lifting arms with

adjustable turntables

• For passenger cars and small vans

MINI-MAX (MM)

Suitable for lifting vehicles with low clearance and

deep-drawn side skirt:

• Enormous adjustable range of 75–185mm

• Multilevel quick adjustment

• Operation with foot

• Plug on adapter especially for passenger cars, adjustable

range of 85–185mm. Lifting capacity max. 4.200 kg

(for 2.50 TTKAS and TTL K SST)

DOUBLE-JOINTED ARMS (DG)

Unique construction with double-jointed per lifting arm for

• Reaching 100% of pick-up points

• Easy lifting of passenger cars through 90° of lifting arms

positioning

TOP L IFT with l i f t ing arms2 PISTON IN-GROUND LIFT

43


TOP L IFT with l i f t ing platform2 PISTON IN-GROUND LIFT

• Fast lifting

• Maximum accessibility

• Unrestricted work on axes and wheels

• Minimum space required

• Low construction – only 58 mm

STANDARD (STD)

• Adjustable lengthwise

• Fully galvanized platform

• Length- and crosswise traversable

• Optional rubber plates replace poly-

mer pads for fast lifting at sillboard

UNIVERSAL (UNI)

• Complete length- and crosswise

adjustable

• Powder coated platform

• Drive-on ramps are adaptable to floor

unevenness

XY LIFTING PLATFORM

• Length- and crosswise adjustable for

optimal achievement of pick-up points

• Fully galvanized platform

• Incl. 4 rubber plates

TOP L I F T

2.35 TS 2.35 T TL TS NT

STD X Y UNI X Y UNI

Lifting capacity (kg) 3500 3500 3500 3500 3500

Lifting height (mm) 2010 2069 2069 2085 2085

Lifting/ lowering time approx. (sec.)

30/30 30/30 30/30 20/20 20/20

Piston diameter (mm) 140 140 140 172, 140 172, 140

Distance between pistons (mm)

1280 1280 1280 variable variable

Platform length (mm) 1600–2400 1524–2107 1400–1930 1536–2120 1400–1930

Platform width (mm) — 890–1817 650–1990 710–1750 650–1990

Platform (mm) 426 365 450 415 450

Drive-on height (mm) 60 77 60 77 60

Installation depth (mm) 2493 2493 2493 1458 1458

Motor (kW) 3 3 3 3 3

Power supply (V/Hz) 400/50 400/50 400/50 400/50 400/50


TOP L IFT with runways2 PISTON IN-GROUND LIFT

2.35 TSAP H 2.50 TTAP & 2.50 TTAP H 2.35 TSAP with alignment support

• Smooth drive-on

• Safe lifting

• Easy positioning

• Low drive-on height (140mm)

• Possible to install above-ground or in-ground

TSA & TTL A – flat runway

• Flat runway

• Optional axle jack

TTA – flat runway with lifting

capacity of 5t

• Drive-on ramps for transporter

and small trucks

• Flat runway

• Optional axle jack

TSAP – „piston in piston“

• Runway + wheel-free lift with short

stroke

• Wheel-free lift: adjustable lengthwise

with short stroke

• Runway with low drive-on height

• Illustration shows INOX Design (opti-

on)

TSAP H – „2 in 1“

• Runway + wheel-free lift is adjustable

in drive-on direction and operates to

full stroke

• The runway and wheel-free lift

operate independently from each

other to the full lifting stroke

• Illustration shows INOX Design (opti-

on)

45


OPTIONS

• JACK 2000 · JACK 2500

Air hydraulic scissor axle jack with

lifting capacity of 2.000kg and 2.500kg

for an universal pick-up vehicles,

either at the outer points of the axis

without relief of the suspension or in

the center of the axis.

• LASER JACK

Pneumatic scissor axle jack with lifting

capacity of 2.000kg to pick-up vehicles

at the outer points of the axis.

• Lighting

Integrated lighting at the runways,

make working under the body work

easier.

• Installation cassette

Preventing mistakes of foundation

works by using of installation cassette.

TOP L I F T 2.35 TSA 2.35 T TL A 2.35 TSAP 2.35 TSAP H 2.50 T TA 2.50 T TA P 2.50 T TA P H

Lifting capacity (kg) 3500 3500 3500 3500 5000 5000 5000

Lifting height (mm) 2040 2085 1920 2080 1970 1870 1970

Lifting/ lowering time approx. (sec) 30/30 20/20 28/25 32/32 43/32 43/32 43/32

Piston diameter (mm) 140172140

172 140 (RFH)

172 140 (RFH)

160 160 160

Distance between pistons (mm) 1280 variable 12501650

RFH: 12501500 1500

1500 RFH: 2600

Arm extraction (mm) — — — — — 450–1255 450–1255

Lowest pick-up point (mm) — — — — — 140–215 115–190

Lifting height wheel-free lift (mm) — — 400 1900 — 675 1990

Lifting platform length (mm) — — 1529–1949 1400–1900 — — —

Drive-on height (mm) 140 140 140140

ID: 160170 170 170

Runway length (mm) 4400 4400 4400 4200 4800 4800 4800

Runway width (mm) 596 596 605 610 700 700 700

Total length above-ground (mm) 4920 4920 5165 5273 5790 5450 5790

Total width (mm) 2042 2042 2050 1994 2300 2300 2300

Installation depth (mm) 2493 1605 2500 2500 2350 2350 2350

Motor (kW) 3 3 3 3 3 3 3

Power supply (V/Hz) 400/50 400/50 400/50 400/50 400/50 400/50 400/50

TTAP – „piston in piston“

• Integrated lifting arms as wheel-free

lift, ideal for the car reception area

and for diagnosis, as well as work on

wheels

• For transporters and small trucks

• Wheel-free lift with short stroke

• Runway length: 4.800mm

TTAP H – „2 in 1“

• The runways and the wheel-free lift

with carrying arms work independent-

ly of each other. Both have a lifting

height of approx. 2m.

„You are actually getting 2 lifts in

one“



We replace your old piston l i f tsLIFTS FOR EXISTING INSTALLATION CANISTERS

ADVANTAGES

• Lifting capacity 3,5t to 5t possible

• No change of lifting height – cylinder stroke 2m!

• Lower installation depth (max. 1750mm)

• Different piston distances are possible

(NUSSBAUM standard: 1280mm, 2200, (2300mm), 2600mm)

• Different load suspension devices are possible (flat lifting

platform & support arms)

• Easy assembly through telescopic-single piston

• Internal hydraulic unit (standard) with wall tableau or

external control unit possible

• No safety ratchet necessary

• No gear rack besides the lifting piston

• No cross beam between the lifting pistons is necessary

• No compressed air is necessary for the function of the lift

• Emergency lowering from outside with internal control unit

(with compressed air)

• Installation is possible independently from the installation

depth of the existing canister

• Hydraulic unit is fixed on the lifting piston.

• Available position of the existing empty pipe can be used

Numerous in-ground piston lifts, also from other manufacturers, are in use for many years. Several of those lifts are now

getting old. Sometimes those types of lifts are not produced anymore or a repair is not worth it. The NUSSBAUM new in-

ground piston lift – TOP LIFT TTL NT can be placed in existing installation canisters with relatively low effort – independent-

ly from the manufacturer.

TO BE PREPARED BY CUSTOMER & SCOPE OF DELIVERY

TOP LIFT TTL NT

SCOPE OF DELIVERY

Lifting unit (2 telescopic lifting pistons)

Installation frame with cover

Internal hydraulic unit (standard), control unit at the wall

Load suspension device depending on distance between pistons and the loading capacity


Power supply 3PH,N+PE,400V,50Hz

Protection 16 ampere fuse

47


1

2

3

4

5

6 7 8

HyperFlow

HyperFlowCOMPACT

®

PROCEDURE:

Only a few steps to your new l i f t!

Picture 1:

Disassembly of the existing lift

Picture 2:

Uncover the concrete around the installation canister

Picture 3:

Seperate the upper frame from the lower part of the existing installation canister

Picture 4:

Insert the installation frame, adjust and fix it with fixation anchors

Picture 5:

Set the concrete reinforcement. Set the installation frame in concrete

Upper edge frame = upper edge of the finished floor

Picture 6:

Insert the TTL NT lifting device with a fork lift and fix it

Connect the electric and hydraulic pipes. Perform a trial

Picture 7 / 8:

Assemble cover and load suspension device and test with vehicle

Otto Nußbaum GmbH & Co. KG

Korker Strasse 24

D-77694 Kehl-Bodersweier

Tel.: +49(0)7853/899-0

Fax: +49(0)7853/8787

[email protected]

www.nussbaum-group.de

Tech

n.

cha

ng

es

an

d e

rro

rs e

xce

pte

d /

09

.20

16

CARS AND TRANSPORTERS - Tekninen Kauppa

Documents

Transcript of CARS AND TRANSPORTERS - Tekninen Kauppa