Carriere Motion Appliance Brochure International
-
Upload
ortho-organizers -
Category
Documents
-
view
238 -
download
1
Transcript of Carriere Motion Appliance Brochure International
-
8/9/2019 Carriere Motion Appliance Brochure International
1/8
TURN CLASS II INTO SIMPLE CLASS I PATIENTS.
THE CARRIERE®
MOTIONTM
APPLIANCE
-
8/9/2019 Carriere Motion Appliance Brochure International
2/8
Fast.Shortens overall treatment time by
up to four months as it treats Class
II correction at the beginning of
the orthodontic treatment, when
there are no competing forces in
the mouth caused by brackets or
other appliances. This is also when
the patient is the most motivated
and compliance is at its highest. A
Class II correction can usually be
completed in an average of 3-4
months.
Natural.Mimicking a human hip ball-socket
joint, the Carriere Motion Appliance
allows the rst molar to rotate and
upright in its natural and correct
nishing position, producing a
continuous, natural, and uniform
force for distal molar movement
with controlled rotation and tipping
correction. Built-in stops engineered
in the appliance prevent the molars
from over-rotating and the crowns
from distal tipping. The Carriere
Motion Appliance’s low forces are
biologically compatible during the
Class II treatment.
Gentle.The low force of the Carriere Motion
Appliance is gentle on your patients,
and its low-prole design is very
comfortable to wear. By treating the
Class II platform rst, it simplies
the entire treatment for you, and
provides greater comfort for your
patients.
-
8/9/2019 Carriere Motion Appliance Brochure International
3/8
A huge move in the right direction for orthodontics.
To limit extractions and to turn difcult Class II patients into simpler Class I patients is a dreamcome true for you and your patients. With its sleek, aesthetic and non-invasive design, the
Carriere Motion Class II Correction Appliance provides greater comfort and shortens treatment
time by up to four months. Delivering a natural, gentle, and uniform force for distal molar
movement with controlled rotation and tipping correction before brackets or other appliances
are placed, the Carriere Motion Appliance solves complex problems almost effortlessly.
Loose but Controlled Forces: The ball and socket joint provides
maximum freedom of movement, but also has built-in stops that allow
the molars to move directly to their desired position while preventing
any unwanted over rotation or tipping.
Fixed Cuspid PadAllows the distal movement of
the cuspid along the alveolar ridge.
Molar Pad BallArticulates in the socket.
Metal Injection Molded (MIM)For strength and proven performance.
Stainless Steel MaterialEnsures malleability so that the appliance
can be customized to every patient.
Sleek and Non-InvasiveDesign delivers greater comfort.
Hooks on PadFor attachment of the Carriere Oral
Elastics (¼ inch, 6 ounces and/or
3/16 inch, 8 ounces of heavy elastic).
Stiff ArmRuns posteriorly over the two upper
premolars in a slight curve. Maintains
exact space between pre-molars
during distalization.
-
8/9/2019 Carriere Motion Appliance Brochure International
4/8
• Eliminates wire changes and the distorting collateral
forces that appear with every wire activation used in
traditional methods.
• Respects periodontal structures.
• Patients are treated faster with less discomfort.
• High level of patient compliance as the appliance
is aesthetically pleasing, and used during the initial
phase of treatment when patient’s motivation is
still high.
Carriere Motion with Carriere Oral Elastic attached to hook
on the cuspid pad. Class I Platform is present when a cuspid
occlusion, in which centric relation coincides with centric
occlusion, and the molar occlusal relationships are a
perfect Class I.
Fig. A
Going from Class II to Class I has never been easier.The Carriere Motion Appliance is a direct bond appliance that attaches to the maxillary canine
and rst permanent molar, providing a simple procedure for turning complex Class II patients
into a Class I Platform. Once a Class I condition is achieved, malocclusions become easier to treatand can be nished with your preferred orthodontic technique. Since there are no competing
forces in the mouth when using this appliance, average Class II correction can usually be
achieved in just three to four months.
How it Works.• Corrects the posterior occlusion to an ideal Class I
Platform rst by rotating and uprighting the maxillary
rst molars while distalizing the posterior segment,
from canine or premolar to molars, into a perfect
occlusion.
• Simultaneously produces a light, uniform force for
distal molar movement.• Independently moves each posterior segment, from
canine or premolar to molar, as a unit.
• Used at the beginning of treatment when there are no
competing forces in the mouth allows the distalization
of the molars and premolars from 3 to 6 mm range,
on average.
Indications.• Most effective in treating Class II symmetrical and
asymmetrical malocclusions without the need for
extractions.• May also be used in many Class I patients with
mesially positioned maxillary molars.
• Growing patients are ideal, but adults may be treated
as well.
• Mixed dentition Class II patients with fully erupted
molars are candidates for Phase 1 treatment to
establish a Class I Platform.
-
8/9/2019 Carriere Motion Appliance Brochure International
5/8
Provides controlled molar rotation
and uprighting.
Fig. 01 The maxillary molars are distalized and rotated, providing a platform for maxillary
canines to occlude in a Class I relationship.
Fig. 02
With mesially rotated molars,
cuspids cannot occlude in Class I
relationship.
Fig. 03 Independently moves each
posterior segment, from canine or
premolar to molar, as a unit.
Fig. 04
The Movement Created by the Carriere Motion.1. Uprighting of the crown, if it is mesially inclined (Fig. 01). Once the molar has been
uprighted, the articulation of the ball with the socket prevents distal tipping.
2. Distal rotation around the palatal root. When the maxillary rst molar is mesially
rotated around the palatal root, the molar occlusion may appear to be Class II,
while in reality it is Class I with the canines in a cusp-to-cusp relationship (Fig. 02).
When the molar has been de-rotated, the shoulder of the posterior base contacts
the mesial arm to prevent over-rotation.
3. Distal displacement without concurrent distal tipping of the crown.
Bodily distalizes the maxillary
posterior segments as a block while
correcting upper rst molar rotation
and uprighting. The posterior portion
of the Carriere Motion Appliance
accomplishes three types of molar
movement:
The Carriere Motion Appliance is placed on the maxillary arch,
but requires a solid and consistent source of anchorage in
the mandibular arch to avoid protrusion of the lower incisors(a lower Essix appliance with direct bonded tubes on lower
molars, a passive lingual arch, a full mandibular xed appliance,
or mini-screws). Once the appliance is bonded, the Carriere
Oral Elastics are attached from the mandibular molar to the
hook of the maxillary cuspid of the Carriere Motion Appliance
to activate.
Ease of Placement.
The Carriere with the LX Difference:
Micro-etched surface for increased
bond strength.
Fig. B
-
8/9/2019 Carriere Motion Appliance Brochure International
6/8
*“First Bicuspid to First Molar” and “Cuspid to First Molar“ descr iptions are an estimated guide of use. The size of the Carriere Motion Appliance and spanof teeth are dependent upon the age and size of each patient.Ask for your free copy of “Class II Correction with Invisalign and Carriere Distalizer” by Dr. Schupp • 999-243
Class II Correction with Clear Aligner Systems.The Carriere Motion Appliance may be used with patients who want to be treated
with clear aligners, but display a Class II malocclusion. This allows practitioners
to treat more patients requesting clear aligners without limitations. Now
complex Class II malocclusion patients can be “jump started” with the
Carriere Motion Appliance and nished with a clear aligner system.
The Carriere Motion Appliance
424-900CN
424-901CN
424-902CN
Carriere Motion
Standard Kit (1 set of each 23, 25, 27 mm)
Carriere Motion Master Kit (1 set of each 16, 18, 20, 23, 25, 27 mm)
Carriere Motion Mega Kit (20 sets)
2 sets of 16 mm
3 sets of 18 mm
2 sets of 20 mm
3 sets of 23 mm
6 sets of 25 mm
4 sets of 27 mm
KITS
FIRST BICUSPID TO FIRST MOLAR*
Description / Size
Item NumbersLEFT
Color-CodeItem Numbers
RIGHT
Item NumbersLEFT & RIGHT (1 SET)
424-912LN
424-913LN
424-914LN
424-915LN
424-916LN
424-917LN
424-918LN
424-919LN
424-920LN
424-921LN
-
-
-
-
White
-
Blue
-
Pink
-
424-912RN
424-913RN
424-914RN
424-915RN
424-916RN
424-917RN
424-918RN
424-919RN
424-920RN
424-921RN
424-912CN
424-913CN
424-914CN
424-915CN
424-916CN
424-917CN
424-918CN
424-919CN
424-920CN
424-921CN
Carriere Motion 12 mm
Carriere Motion 13 mm
Carriere Motion 14 mm
Carriere Motion 15 mm
Carriere Motion 16 mm
Carriere Motion 17 mm
Carriere Motion 18 mm
Carriere Motion 19 mm
Carriere Motion 20 mm
Carriere Motion 21 mm
Description / Size
Item NumbersLEFT & RIGHT (1 SET)
-
8/9/2019 Carriere Motion Appliance Brochure International
7/8
*“First Bicuspid to First Molar” and “Cuspid to First Molar“ descr iptions are an estimated guide of use. The size of the Carriere Motion Appliance and span ofteeth are dependent upon the age and size of each patient.
U.S. Patent Nos. 7,618,257; 6,976,839; 7,238,022
424-922CN
424-923CN
424-924CN
424-925CN
424-926CN
424-927CN
424-928CN
424-929CN
424-930CN
424-931CN
424-932CN
424-933CN
424-934CN
424-922RN
424-923RN
424-924RN
424-925RN
424-926RN
424-927RN
424-928RN
424-929RN
424-930RN
424-931RN
424-932RN
424-933RN
424-934RN
424-922LN
424-923LN
424-924LN
424-925LN
424-926L N
424-927LN
424-928LN
424-929LN
424-930LN
424-931LN
424-932LN
424-933LN
424-934LN
Carriere Motion 22 mm
Carriere Motion 23 mm
Carriere Motion 24 mm
Carriere Motion 25 mm
Carriere Motion 26 mm
Carriere Motion 27 mm
Carriere Motion 28 mm
Carriere Motion 29 mm
Carriere Motion 30 mm
Carriere Motion 31 mm
Carriere Motion 32 mm
Carriere Motion 33 mm
Carriere Motion 34 mm
The Carriere Motion Appliance
CUSPID TO FIRST MOLAR*
Description / Size
Item NumbersLEFT
Item NumbersRIGHT
Item NumbersLEFT & RIGHT (1 SET)
631-017D
631-017DNE
424-9F1
424-9F2
CDA-TRAY
032-060
032-061
032-062
032-063
032-064
617-4402
Typodont-26 mm Carriere Motion with Lingual Arch
Typodont-Carriere Motion with Clear Aligner
Carriere Motion Elastics - Force 1, 1/4”, 6 oz (50 packs of 100 elastics)
Carriere Motion Elastics - Force 2,3/
16”, 8 oz (50 packs of 100 elastics)
Carriere Motion Storage Tray (1/pk)
Fixed Lingual Contour Arch Appliance for Lower Anchorage Kit (5 of each size)
Fixed Lingual Contour Arch Appliance for Lower Anchorage, Size 1 (5/pk)
Fixed Lingual Contour Arch Appliance for Lower Anchorage, Size 2 (5/pk)
Fixed Lingual Contour Arch Appliance for Lower Anchorage, Size 3 (5/pk)
Fixed Lingual Contour Arch Appliance for Lower Anchorage, Size 4 (5/pk)
Essix, A+ .040 (100/pk)
ACCESSORIES
Description / Size Item Numbers
Color-Code
-
Yellow
-
Red
-
Green
-
-
-
-
-
-
-
-
8/9/2019 Carriere Motion Appliance Brochure International
8/8