Carried Out Magnetic Particle Inspection on Nozzle Welds
description
Transcript of Carried Out Magnetic Particle Inspection on Nozzle Welds
Carried out Magnetic Particle inspection on nozzle welds, fillet welds and inspection on machined components by using different methods like wet method and dry method using Yoke and Prod technique.
• Carried out penetrant inspection on weld joints, equipments, components such as in heat exchanger tubes using visible solvent removable method.
• Radiography of tanks, vessels, pressure parts, prefabricated weld joints of pipes using Gamma ray.
• Familiar in single wall ¡Vsingle image, Double wall-Double Image, Elliptical, Panoramic & Super Impose.( Dia Range from-1inch to 56inch)
• Surface NDT (MPI & DP) on structural as well as pressure parts on fillet, butt-welds on various materials.
• Visual inspection and interpretation of radiographs as per various national and International standards.• Carried out Radiography method of inspection to find out internal flaws in welds using all techniques viz DWDI, DWSI, Panoramic and SWSI.
• Good experience in film processing and interpretation of films.
Akash Singh123,Maidhan StreetGoregaon,MumbaiMobile:97877665656
Career Objective:To obtain a NDT Technician position in an organization with potential to expand and grow.
Work Experience:
Mechlac Construction Company-Qatar as NDT InspectorJune 2009 to Till Date
Techno India Private Limited, Mumbai as NDT InspectorFrom Jan 2007to May 2009
JOB DESCRIPTION:
Coordinate all NDT activities with the third party contractor.Dimensional, Leak Test & Visual inspection
To assist the Inspector/ Engineer during on-steam inspection of piping and static equipment.To assist in quality control of all welding, insulation, painting and refactory works.To carry out NDT on pipes and vessels under supervision of inspection section Head/ Engineer.
Witnessing Radiographic TestingWitnessing Magnetic Particle Testing.Carry Out UT/MPI/DPT/PMI
To comply with all company health safty and Environment as well as work permit,policies and procedures..
Radiographic interpretation & DevelopingPreparation Daily ReportQuality related activitiesPMI-Positive Materials Identification.Galvanization & Power Coating Inspection
CERTIFICATIONS:
Level-II RT ASNT SNT-TC-1A ( 2001
Level-II UT ASNT SNT-TC-1A ( 2001
Level-II PT ASNT SNT-TC-1A ( 2001)
Level-II MT ASNT SNT-TC-1A ( 2001)
Offshore Survival Course
FAMILIAR WITH FOLLOWING NDT EQUIPMENT / METHODS
MT - Electromagnetic Yoke with wet Florescent. UT - Modsonic PT - Carried our fluorescent Dye Penetrate Testing of welding, nuzzles,Heat exchangers tube bundles including Ferrous and non ferrous metals
Using solvent removal and water washable methods
Hardness testing of welds joints with hardness test.
RT - Interpreting the films “RT” equipment Sentinel (Sigma 880) PMI - X-MET 5000 (Oxford Instrument).
Conversant Standard and Codes AWS D1 .1, ASME SEC V V111, ASME SEC IX, API-104
EDUCATIONALQUALIFICATION:Diploma in Mechanical Engineering from Mumbai ASNT LEVEL II CERTIFICATES .
PERSONAL DETAILS:
Father’s Name :Date of Birth :Languages Known :Hobbies :Passport No. :Passport Issue date :Passport Validity :
Resume Text:CURRICULUM VITAE
OBJECTIVE
To keep the highest level of quality standards in the oil & gas industry and organization. EDUCATIONAL QUALIFICATION Bachelor of Arts (B.A), +2 Computer Science Diploma in system management (DISM)
PROFESSIONAL ATTAINMENT ASNT NDT LEVEL- II in American Society for Non-destructive testing (ASNT), as per SNT-TC- 1 A Practice.
Radiography Testing Ultrasonic Testing Magnetic particle Testing Penetrate Testing CERTIFICATIONS / TRAINING Safety Training taken for H2S, Confined Space, Vessel Entry in Oil, Gas & Petrochemicals fields. Attended 25 days training on over view of various NDT Methods conducted by Matrix institute of NDT Hosur, India Attended various seminars and conferences on effective project and construction management in oil and gas sectorEMPLOYMENT SUMMARY Having more than 7 years experience in QA/QC, NDT and Engineering related to construction, commissioning as well as maintenance of petrochemical, Oil & Gas field industries. Extensive inspection experience in fabrication and installation of on shore structures, industrial equipments, Vessel, Heat exchangers, Tanks, piping and structural components. Good exposure to international codes and standards. Gained experience in welding process, NDT methods and NGL plant process. Outstanding Leadership performed through out the carrier.
ROLES AND EXPERIENCE
May 2006 – Till date : Working as QC / NDT Inspector with Industrial X-Ray & Allied Radiographers (I) Pvt.Ltd.Mumbai.Dec’2005 – April’2006 :
Working as QA/QC’/ NDT inspector with Inspection Technology, Mumbai.August’2004 – Oct’2005 : Working as Multy Discipline
Inspector/ QC Inspector with M/S. Sitas, Bangalore, Karnataka, IndiaJune’2003 – July’2004 : Working as a Multy Discipline Inspector with Ever Green NDT Engineers at Trichy, Tamilnadu, IndiaMay’2002 – Apr’2003 : Working as a Multy Discipline Inspector with Escon Technical Services Pvt Ltd., Kovai, Tamilnadu, India
QA/QC INSPECTION
Performed the QA/QC function of fabrication, construction, commissioning and maintenance activities, this includes, Performs inspection through Quality Plan, ITP, NDT plan and Client specifications Ensure that all activities identified in Project Quality Plan and ITP. Performs inspection/ audit to vendor/Sub contractor facilities Co-ordinates with other departments, Clients and Third party inspector. Monitors construction activities and its compliance inline with applicable quality requirements Witness of Destructive and Non destructive testing Performs final inspection and reports and coordinates for Punch list clearance Performs in-Process and turn around inspection of Equipments and Piping in process plant. Handles final certification packages, MDRs and Project hand over documents
Shut Down Experience
Worked as NDT Inspector in RELIANCE Petrochemicals at Dahuj with IPCL thru Inspection Technologies to carry out NDT Activities on Boilers, vessel, tanks and piping.
NDT INSPECTION Ultrasonic, Radiography, Penetrate and Magnetic Particle Testing of Vessels, Heat Exchangers and Pipelines. Interpret drawings, NDT symbols.
Radiography of tanks, Vessels, Pressure parts, prefabricated weld joint of pipes using gamma ray. Familiar in single wall – single image, Double wall-Double Image, Elliptical, Panoramic & Super Impose (Dia Range from – ¾ Inch to 50 Inch) UT lamination and Thickness survey gauges both erosion and corrosion components, vessels, piping and tubing of petroleum, Refinery, Power and Chemical Industries. Functional as UT gauging Inspector for doing corrosion survey of machine vessels according to classification rules. Preparation and submission of reports & Co-ordination with clients Perform UT Thickness / Scanning and visual inspection as required and compare with the previous document to note corrosion level, highlighting and submit their shops and Inspection & Audit of QP Mechanical contractors
Materials Variety of ferrous materials in different grades Non-ferrous materials – copper, Nickel, Monel, Aluminum, Titanium and alloy steels
Codes & Standards ASME Sec V,Sec VIII & Project Specs. Inspection Techniques Material Welding, Piping, Erection, Dimensional, Visual, Heat treatment. In-Services Inspection of Equipments, Piping and accessories in Petrochemical industries. Corrosion monitoring, Equipment Repair, Boiler / Furnace tube repair/replacement and shut down activities Leak Test: Hydrostatic, Pneumatic Helium, Nitrogen & Air, also NDT Techniques: UT, RT, MT, PT, and PMI.
Computer Knowledge Proficient in Microsoft windows 2000, Microsoft Word & Excel, Power point and Access Developed certain In-house software programs to facilitate quality management and Planning.
PERSONAL DETAILSDate of BirthNationalityPassport No. Communication Address. R.Balasubramaniam1D, Poomalai chetty st. Dharmapuri, Tamilnadu, India.Pin: 636702 Ph: 09443622918 [email protected] :::
11-11-1978IndianG7703710, Validity Till 09-03-2018Permanent Address.1D, Poomalai chetty st. Dharmapuri, Tamilnadu, India.Pin: 636702 Ph: 09443622918 [email protected]
m JAL International!
Please find attached total requirement with Job description of SABIC Mega recruitment campaign SEPTEMBER 25th to OCTOBER 2nd . Interview venue details.
SR.NO
DATES
DAYSLOACATIO
N
NIGHT STA
Y
ACTION
PREFRRED INTERVIEW LOCATION
INTERVIEW TIME
Day-00
24th
SEP
TUESDAY KICK OFF MEETING
Day-01
25th
SEP
WEDNESDA
YCHENNAI
CHENNA
IINTERVIEW
RADDISON BLU -
CHENNAI CITY
CENTRE,NO 2 ETHIRAJ
SALAI, C-IN-C ROAD,
EGMORE,CHENNAI 600
8:30 A.M
6:30 P.M
Day-02
26th
SEP
THURSDAY
CHENNAI
CHENNA
I
INTERVIEW
8:30 A.M
6:30 P.M
008,INDIADay-03
27th
SEP
FRIDAY
TRAVEL
MUMBA
I
TRAVEL CHENNAI -MUMBAI
Day-04
28th
SEP
SATURDAY
MUMBAI
MUMBA
IINTERVIEW
REGUS BUSSINESS CENTRE - BKC,G/F & 1/F, TRADE CENTRE, BANDRA KURLA
COMPLEX, BANDRA (E), MUMBAI,IND
IA
8:30 A.M
6:30 P.M
Day-05
29th
SEP
SUNDAY
MUMBAI
MUMBA
IINTERVIEW
8:30 A.M
6:30 P.M
Day-06
30th
SEP
MONDAY
TRAVEL
BARODA
TRAVEL MUMBAI-BARODA
Day-07
1st OCT
TUESDAY
BARODA
BARODA
INTERVIEW
ITC WELCOME
HOTEL - VADODRA,R.
C.DUTT ROAD,ALKAP
URI , VADODRA,GUJARAT,INDI
A
8:30 A.M
6:30 P.M
Day-08
2ndOCT
WEDNESDA
YBARO
DABARODA
INTERVIEW
8:30 A.M
6:30 P.M
Day-09
3rdOCT
THURSDAY
BARODA
BARODA
FINALIZATIO
N
TRAVEL FROM
BARODA – DAMMAM
THIS IS FOR FINALIZATION ONLY. THERE IS NO INTERVIEW ACTIVITY ON THIS
DAY.
You are requested to send us the interested candidate resume with the location they will available for interview and applied post .. The Interested candidate will receive the INTERVIEW CALL LETTER on behalf of JAL International and they will be guided accordingly. Each candidate must bring the following documents during the interview. 1. Updated C.V2. Qualification Certificate copy with original for verification purpose.3. Experience certificate4. Original passport with copy5. 4 Number recent photographs
Have a Great Day Thanks & RegardsSuhel ShaikhRecruitment CoordinatorContact: 033412121 -320Email : [email protected]