Carman Wi Operation Manual 100226 - Carmanscan · PDF fileCarman Wi Operation Manual ......
Transcript of Carman Wi Operation Manual 100226 - Carmanscan · PDF fileCarman Wi Operation Manual ......
Carman Wi Operation Manual
Some of the information in this manual may differ from the product you
have due to updates and software changes. The information in this
manual are subject to change without notice.
For the most updated operation manual, visit www.nex-tek.com.
2
Carman Wi Operation Manual
CONTENTS
Overview of Carman Wi
Cautions in Use
I. Parts of Main Module.......................................................... 5
II. Power Supply ..................................................................... 6
III. Components Lists ............................................................ 7
IV. Specification ..................................................................... 9
V. Pictures of Components ................................................. 10
VI. Main Screen .................................................................... 16
VII. Vehicle Diagnosis.......................................................... 18
VIII. Program Download ...................................................... 29
IX. Saved Data ...................................................................... 31
X. Calculator......................................................................... 37
XI. Customer Management.................................................. 38
XII. Configuration................................................................. 41
XIII. Internet .......................................................................... 45
3
Carman Wi Operation Manual
Overview of Carman Wi
Carman Wi checks the vehicle defects by cable or wireless as a self-diagnostic sensor scan tool. As it is a compact size and wireless LAN communication type, users can diagnose the vehicle defects more quickly and conveniently. ※ Functional Summary Diagnostic function of Korean, Japanese, European, American Vehicles Vehicle communication function by Wireless LAN, USB method Work efficiency connecting the existing PC Saved Data Search function
Please, try to use the software installation to install the program, after reading an operating manual from the beginning to the end.
2010. 01. Nextech Co., Ltd
4
Carman Wi Operation Manual
Cautions in use
Safety Instruction Cautions in Use Carman Wi described in this manual was manufactured for those who have the basic knowledge required for its use. Users should follow the safety instructions for safe and efficient use of the product. The cautions of use are as follows: Do not drop or apply impact on it. Never use the product without the rubber boot in place. (Especially be
careful with the wireless LAN CF card on top of the module.) Do not put the product on a distributor. Even though Carman Wi is manufactured to internally prevent the
interference from the electromagnetic waves, the strong interference by excessive electromagnetic waves may damage the product.
The strong surge or electric shock applied to the power cable may
damage the power supply unit of the product. So, do not use the product while the power supply is unstable.
The voltage rating of the AC/DC adapter is 12V DC. Be sure to use an AC/DC adaptor with the rated voltage. Never disassemble, repair or modify this product.
The wireless communication can be disconnected due to environment conditions.
5
Carman Wi Operation Manual
I. Parts of Main Module
Front view
[Front view]
Status sign LED
☞ Displays the status of Carman Wi. 1. POWER : Displays power on or off. 2. COM : Displays communication status.
[Right side view]
1. RS-232 : It is for repair and should not be used by users. 2. USB : It supports USB 2.0 standard and connects PC. 3. POWER : It powers up by an AC/DC adapter.
- The unit powers up by the communication with OBD-II standard vehicle without an AC/DC adapter.
6
Carman Wi Operation Manual
II. Power Supply Carman Wi can be supplied with power in four ways as follows:
1. CIGAR LIGHTER CABLE The cigar lighter cable can supply power to the product. However, when the vehicle ignition switch is off or upon starting a vehicle, power is not supplied to the cigar lighter socket.
2. VEHICLE BATTERY Connect the red clip of the battery connection cable to the (+) battery terminal, and black clip to the (-) terminal. Connect the cigar lighter cable between the battery connection cable and the product. In this case, power is supplied anytime regardless of the ignition switch status or vehicle starting.
Be careful when connecting the cable, as incorrect polarity may damage the mainframe.
3. DLC MAIN CABLE Where the vehicle satisfies the OBD-II communication convention and uses a diagnostic connector, the DLC main cable can supply power to the product directly without a separate power supply.
4. AC/DC ADAPTOR Power can be supplied through a AC/DC adapter. Make sure to use only the genuine adapter supplied by Nextek.
7
Carman Wi Operation Manual
III. Components Lists
1. Components 1) Standard/ Asian kit
NO. PART NUMBER ITEMS
1 12000-10000 Carman Wi MAIN MODULE
2 12000-11000 OPERATION & PROGRAM INSTALL MANUAL
3 12000-11100 PROGRAM CD
4 12000-11110 USB CABLE
5 12000-11111 BATTERY EX.CABLE
6 12000-12111 DLC MAIN CABLE
7 12000-12211 CIGAR LIGHTER CABLE
8 12000-12221 AC/DC ADAPTOR
9 12000-12231 AC POWER CORD
10 12000-12232 WIRELESS LAN CF CARD
11 12000-12233 USB 2.0 WIRELESS LAN CARD
12 12000-12222 HYUNDAI/MITSUBISHI 12P
13 12000-13222 KIA/MAZDA 6 PIN
14 12000-13322 KIA 20 PIN
15 12000-13332 DAEWOO/GM
16 12000-14333 SSANGYONG 14 PIN
17 12000-14433 SSANGYONG 20 PIN
18 12000-14443 SAMSUNG 14 PIN
19 12000-20000 TOYOTA,LEXUS(17R)
20 12000-22000 TOYOTA,LEXUS(17C)
21 12000-22200 HONDA 3PIN
22 12000-22220 MAZDA "C" 17 PIN
23 12000-22222 SUBARU 16 PIN-9 PIN
24 12000-22221 MITSUBISHI 12P+16P
25 12000-23222 HONDA 5PIN
26 12000-15544 CARRYING CASE
27 12000-6000 LOW SPEED CAN
28 12000-6001 GM DAEWOO / SSANGYONG 16 PIN
8
Carman Wi Operation Manual
III. Components Lists
2) Basic kit
NO. PART NUMBER ITEMS
1 12000-10000 CARMAN Wi MAIN MODULE
2 12000-11000 OPERATION & PROGRAM INSTALL MANUAL
3 12000-11100 PROGRAM CD
4 12000-11110 USB CABLE
5 12000-11111 BATTERY EX.CABLE
6 12000-12111 DLC MAIN CABLE
7 12000-12211 CIGAR LIGHTER CABLE
8 12000-12221 AC/DC ADAPTOR
9 12000-12231 AC POWER CORD
10 12000-12232 WIRELESS LAN CF CARD
11 12000-12233 USB 2.0 WIRELESS LAN CARD
3) Europe
NO. PART NUMBER ITEMS
1 12000-30000 PSA 30P ADAPTER
2 12000-33000 PSA 2P ADAPTER
3 12000-33300 RENAULT 12P ADAPTER
4 12000-33330 MERCEDES 38P PIN BOARD
5 12000-33333 BMW
6 12000-34333 OPEL 10P ADAPTER
7 12000-34433 AUDI/VW 2+2P CABLE
8 12000-34443 MERCEDES 3 LINER
9 09910-49040 FIAT 3P ADAPTER
10 12000-6000 LOW-SPEED CAN ADAPTER
4) USA / AUSTRALIAN KIT
NO. PART NUMBER ITEMS
1 12000-40000 FORD 20P CABLE
2 12000-44000 HOLDEN 6P CABLE
9
Carman Wi Operation Manual
IV. Specification
System Specifications
1. Carman Wi
- Memory: 32MB Internal Flash Memory
- Operating Voltage: 7-36V DC INPUT
- Frequency: 2.4~2.48 GHz
- Electricity Consumption: 4.5 Watt
- Temperature range: 0~60℃
- Ethernet: IEEE 802.11b 11M bps
- DLC communication: All Korean vehicles
OBD-Ⅱ(ISO 9141-2), CAN
OBD-Ⅱ(SAE-J1850), VPW, PWM
KWP-2000
2. PC recommendation
- Hardware (recommended)
CPU: Minimum Pentium 4
USB: Minimum 2.0
- Software
O/S: Minimum Windows 2000 (Windows XP recommended)
Vista (32Bit)
Win 7 (32Bit)
10
Carman Wi Operation Manual
V. Pictures of Components
1. Basic kit
MAIN MODULE CIGAR LIGHTER CABLE
BATTERY EX.CABLE DLC MAIN CABLE
USB CABLE OPERATION & PROGRAM INSTALL MANUAL
PROGRAM CD AC/DC ADAPTER
11
Carman Wi Operation Manual
V. Pictures of Components
DLC ADAPTER The DLC adapter is to diagnose vehicles by connecting it to the DLC main connector. As there are similar shaped adapters, make sure to check the vehicle manufacturer name on the adapter before use. Also, there can be various adapters for one manufacturer. Therefore, be sure to check the shape and pin numbers of the diagnostic connector in the vehicle.
Some vehicles does not supply power through the diagnostic connector. Do not connect any power supply if power can be supplied through the diagnostic connector.
2. Standard/ Asian kit
HYUNDAI/ MITSUBISHI CABLE (12P) KIA/MAZDA ADAPTER (6+1P) KIA ADAPTER (20P)(BLUE) DAEWOO ADAPTER (12P) SSANGYONG ADAPTER (14P) SSANGYONG ADAPTER (20P)
12
Carman Wi Operation Manual
V. Pictures of Components
DAEWOO LPG CABLE SAMSUNG ADAPTER (14P)
TOYOTA ADAPTER (17R) TOYOTA ADAPTER (17C)
HONDA ADAPTER (3P) HONDA ADAPTER (5P)
MAZDA ADAPTER (6+1P) LOW-SPEED CAN ADAPTER
13
Carman Wi Operation Manual
V. Pictures of Components
MAZDA ADAPTER (17C) MITSUBISHI CONNECTOR (12+16P)
MITSUBISHI CONNECTOR (12P) NISSAN/INFINITI ADAPTER (14P)
SUBARU ADAPTER (9P) GM DAEWOO / SSANGYONG(16P)
14
Carman Wi Operation Manual
V. Pictures of Components
3. European kit
PSA CABLE(30P) PSA CABLE(2P)
FIAT ADAPTER (3P) RENAULT CABLE (12P)
BENZ PIN BOARD (38P) OPEL ADAPTER (10P)
AUDI/VW CABLE(2+2P) BENZ CABLE (3 LINER)
15
Carman Wi Operation Manual
V. Pictures of Components
BMW ADAPTER LOW-SPEED CAN ADAPTER
4. USA/AUSTRALIAN KIT
HOLDEN ADAPTER (6P) FORD ADAPTER (20P)
16
Carman Wi Operation Manual
VI. Main screen
1. Screen Layout and Description
1) VEHICLE DIAGNOSIS
: Provides the function to diagnose the vehicle and display sensor outputs via communication with a vehicle.
2) PROGRAM DOWNLOAD
: Above item can be used when you download the saved data in Hard disk to Carman Wi. Also, you can change the units of Speed, Temperature, Pressure, Degrees of an angle and others if you press “SYSTEM SETUP.”
3) SAVE DATA
: Displays sensor data values, waveforms, current DTC
values, automatically saved DTC values, etc.
17
Carman Wi Operation Manual
VI. Main screen
4) CALCULATOR
: Provides a general calculator and unit conversion function.
5) CUSTOMER MANAGEMENT
: Provides functions to register, search and modify customer information and select a customer from the customer list to run the vehicle diagnosis.
6) CONFIGURATION
: Provides functions to set the user language, select wire/wireless communication and set your IP.
7) INTERNET
: Displays the web page which is set by a user in the CONFIGURATION menu.
(It is only available when the Internet access is possible.)
8) Wireless Check : Provides the function to check the wireless
communication connection.
18
Carman Wi Operation Manual
VII. Vehicle diagnosis
1. Vehicle connection and diagnosis program 1) Vehicle connection (1) In other to use the Carman Wi, be sure to connect the main cable to the
DLC connector of Carman Wi. - Try pushing the main cable until you can hear “Click” sound.
(2) Try to connect the cable to the vehicle after checking the location and specification of a connector.
- Communication error will occur from connection problems.
Fig. 1 How to connect a main cable to a vehicle
Please, check the direction of the cable and the manufacture of vehicles first before trying to connect the cable to the vehicle. Some of vehicles cannot be supply the Wi with vehicle power via a main cable. If so, you should use a cigar cable to provide Carman Wi with power.
19
Carman Wi Operation Manual
VII. Vehicle diagnosis
2. Communication - Select the manufacturer of your vehicle. Then, select the system (engine, TCU, ABS,
etc.) to diagnose.
Fig. 2 Vehicle model selection screen
- “Connecting ECM...” is displayed, and then the diagnosis function is activated.
Fig. 3 Connecting ECM
If the diagnosis function cannot be activated, check the vehicle specification and connector connection status.
20
Carman Wi Operation Manual
VII. Vehicle diagnosis
3. Diagnosis Program 1) Diagnosis menu
Fig. 4 Diagnosis Main Screen
(1) Procedure for selecting a diagnosis menu - Shows the procedure for selecting a diagnosis menu.
Maker >> Vehicle Type >> System >> System Spec. >> Detailed Spec. >> Connector Type
(2) Print : You can print the current screen through connected printer.
(3) Return
: Pressing this icon returns the screen to the previous menu.
(4) Minimize : Tap on this icon to change a size of a screen to minimum.
(5) Home
: Tap on this icon to move a main screen.
21
Carman Wi Operation Manual
VII. Vehicle diagnosis
(6) Trouble Code
: You can display the trouble code of the system, and delete a trouble code.
(7) Sensor
: You can search the current values of the sensors of the relevant system.
(8) Actuator
: You can check if the system is normal by forcibly starting or stopping the actuators of the relevant system.
(9) Other
: You can check and set various supplementary functions, including the dual-display function.
(10) Save (Freeze)
: This button is to save the trouble code and all sensor data
during vehicle diagnosis.
(11) Diagnosis menu
: Clicking this button returns to the main screen as shown
in the Fig. 4.
(12) Home
: Clicking this button returns to the vehicle selection screen as shown in the Fig. 2.
22
Carman Wi Operation Manual
VII. Vehicle diagnosis
2) Major Functions (1) Trouble Code
If any trouble is detected, the corresponding trouble code, the number of trouble codes and their description are displayed. If there is no trouble, “NO TROUBLE CODES” is displayed.
Fig. 5 Trouble code
: If there is a fault code, tap on “ERASE” to delete the code.
To erase DTCs, preconditions should be met. Otherwise, they cannot be erased or malfunction can occur.
A temporary trouble code may be erased without repairing. But if the fault is still valid, the code is erased temporarily, and will then be displayed again.
23
Carman Wi Operation Manual
VII. Vehicle diagnosis
(2) Sensor
Sensor value changes can be displayed in numbers or graph, stored in a file. Also, a stored file can be loaded.
Fig. 6 Sensor output screen (text view)
: This button is to display the fixed sensor value in a graph. This function is deactivated unless a sensor is fixed.
: Only the desired sensor item can be fixed for a check. Up to 8 sensors can be fixed.
(The item can be added by pointing at the desired sensor item and double-clicking it.)
: Every clicking on this button adds a item up to 8. : All the fixed items are unfixed.
24
Carman Wi Operation Manual
VII. Vehicle diagnosis
: This button is to store the fixed sensor item. The sensor item cannot be saved unless fixed.
: This button is to start storing the fixed sensor item. : This button is to stop storing the fixed sensor item.
: This button is to load a saved file.
: Pressing this button initializes the minimum/maximum values of a sensor.
25
Carman Wi Operation Manual
VII. Vehicle diagnosis
Fig. 7 Sensor output screen (graph view)
: Pressing this button switches the screen from the graph view to the text view as shown in the Fig. 6 .
: This button is to store the sensor item displayed in a graph.
: Desired minimum/maximum values can be set. Up to 8 channels can be set.
Make sure to click on the Apply button after making changes.
26
Carman Wi Operation Manual
VII. Vehicle diagnosis
: You can scroll up and down to display the desired channel.
: The number of channels to be displayed can be set using these buttons (max.: 8, min.: 1).
: You can play or stop a graph using these buttons.
: You can zoom in or out a graph (time interval adjustment).
27
Carman Wi Operation Manual
VII. Vehicle diagnosis
(3) Actuator
You can check if the system is normal by forcibly starting or stopping the actuators of the relevant system. For certain items, their values can be increased or decreased during operation.
Fig. 8 Actuator screen
Be sure to check the duration, method and condition on the right side panel before activating an actuator.
: Click this button to start an actuator.
: Click this button to stop an actuator.
28
Carman Wi Operation Manual
VII. Vehicle diagnosis
(4) Other
You can check the dual display mode, various special functions, system specifications, etc.
Fig. 9 OTHER Screen
Special items or functions vary by vehicle models.
29
Carman Wi Operation Manual
VIII. Program download
When you download new S/W programs, your PC and Carman Wi always should be connected by the USB cable.
1. Program Download 1) Diagnostic data download
Fig. 10 Program download (pack data download)
: Select the desired diagnostic data and press this button to delete it.
: Select any diagnostic data stored in your PC and press this button to download them to the module.
: Press this button to initialize the memory in the module.
: Press this button to relocate data in the memory in
the module for efficiency.
: Press this button to load data from your PC or module again.
Diagnosis program saved in: C:\ProgramFiles\Nextech\CarmanWi \scan_data
30
Carman Wi Operation Manual
VIII. Program download
2) System setup
Fig. 11 Program download (system setup) The units of Speed, Temperature, Pressure, Degrees of an angle and others can be changed in above screen. After changing the value of the items, press the “WRITE SYSTEM” button to save.
: Pressing this button loads the currently set data in the system.
: Press this button to apply changes to the system. (saving changed setting)
31
Carman Wi Operation Manual
IX. Saved Data
1. Saved data
Fig. 12 Save Data
1) FLIGHT RECORD
: You can check the sensor output value file which was stored during diagnosis.
2) SAVE DATA (FREEZE)
: You can check the trouble codes and all sensor output value file which were stored during diagnosis.
3) SAVE DATA (Auto DTC Searching)
: You can check the auto DTC searching file.
32
Carman Wi Operation Manual
IX. Saved Data
(1) FLIGHT RECORD
Fig. 13 Sensor data file view (list mode)
: Tap on “GRAPH” to check the stored file in the graph mode.
: This button is to delete a stored file.
: This button is to rename a stored file.
33
Carman Wi Operation Manual
IX. Saved Data
Fig. 14 Sensor data file view (graph mode)
: Tap on “LIST” to return to the saved data list menu. Then, Fig. 13 is displayed.
: The number of displayed channels can be increased or decreased by these buttons (max.: 8, min.: 1).
: You can scroll up and down using these buttons.
: You can print the current screen through the connected printer.
34
Carman Wi Operation Manual
IX. Saved Data
(2) Save data (FREEZE)
Fig. 15 Save data view (FREEZE)
: This button is to select a file to check. Up to 2 files can be selected.
: This button is to display detailed information of the selected (activated) file.
: This button is to delete a stored file.
: This button is to rename a stored file.
Active file selection box
35
Carman Wi Operation Manual
IX. Saved Data
: This button is to search for a file for a check.
: This button is to change information in a file.
Fig. 16-1 View mode
Fig. 16-2 View mode
36
Carman Wi Operation Manual
IX. Saved Data
(3) Save data (Auto DTC Searching)
Fig. 17 Save data (Auto DTC Searching)
※ The button functions are the same for the ones for the “Save data (FREEZE)” function. ※
Fig. 18 View mode (Auto DTC Searching)
37
Carman Wi Operation Manual
X. Calculator
1. Calculator
Fig. 19 Calculator
1) Input data pane - The data entered via the number panel is displayed.
2) Data input keys - Can be used the same as a general calculator.
3) Unit setting pane - You can select the unit of the number to be displayed on an input pane. - If you select a unit, the result is converted to other units shown in the pane (5).
4) Input result pane - The entered number and unit are displayed here.
5) Unit conversion pane - The entered number is converted to other units listed in this pane.
1
2
4
5
3
38
Carman Wi Operation Manual
XI. Customer management
1. Customer management
Fig. 20-1 Customer management screen
You can register, search and modify the customer information as well as perform diagnosis through the customer list.
1) : This button is to register vehicle and personal information of a new customer.
Fig. 20-2 Customer management screen
39
Carman Wi Operation Manual
XI. Customer management
2) : This button is to modify information of the
registered customer.
3) : This button is to delete information of the registered customer.
4) : This is to refresh the registered customer list.
5) : This button is to display the saved data for the
selected customer's vehicle. ▶ Select a customer and press
the SAVE DATA button. ▶ The screen is switched to the
saved data list as shown below.
Fig. 20-3 Customer management screen ▶ The saved data list is displayed. ▶ Pressing the View button
displays the corresponding viewer screen.
Fig. 20-4 Customer management screen
40
Carman Wi Operation Manual
XI. Customer management
6) : Press this button to set the location of the
folder to store the customer database file and inspection data file.
Fig. 20-5 Customer management screen ▶ Local Drive: Use this option when using only one computer.
▶ Network Drive: If several computers are connected via network, select a folder in the server computer to share the customer information with peers and input information from other computers.
7) : Pressing this button returns to the main screen.
8) : Pressing this button start the vehicle diagnosis for
the selected customer. 9) Customer search function: Check the desired search criteria box and
enter a word to search for.
You can enter only a part of the full description in the box for a search. Example) If the customer name is “James Kim”, it can be searched by entering only “James”. If the vehicle license plate number is “000 XXX”, it can be searched by entering only “000” or “XXX”.
41
Carman Wi Operation Manual
XII. Configuration
1. Configuration
Fig. 21 Configuration screen
This function is to check the system information and make changes in the product settings.
: Select the desired language and click the OK button.
: You can switch the connection to the Carman Wi module between the USB mode and wireless LAN mode.
: It displays an IP address of the wireless module when the
wireless LAN mode is in use.
For detailed information, refer to the section Wireless & IP setup in Carman Wi Program installation guide.
42
Carman Wi Operation Manual
XII. Configuration
: You can change the IP of the module arbitrarily.
Fig. 22 MODULE IP SET screen
For detailed information, refer to the section Wireless & IP setup in Carman Wi Program installation guide.
43
Carman Wi Operation Manual
XII. Configuration
: The color of the graph can be changed using this button.
Fig. 23 GRAPH SET screen
: You can select the bottom color of the screen.
: You can change the color of the vertical axis line on the screen.
: You can change the color of the horizontal axis line on the screen.
: You can change the color of the cursor which the point of time is selected by user.
44
Carman Wi Operation Manual
XII. Configuration
: You can select from Channel 1 to Channel 8.
: You can change the color of the selected channel.
: Tap to select Default 1.
: Tap to select Default 2.
45
Carman Wi Operation Manual
XIII. Internet
1. Internet
Fig. 25 Internet
Displays the web page which is set by a user in the CONFIGURATION menu.
www.nex-tek.com
46
Carman Wi Operation Manual
This manual will be released for the better service without notice via our web-site. Refer to Nextech’s homepage.
Wireless Scan Module
Model No : Carman Wi Manufacturer : Nextech Co. Ltd FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interface received, including interference that may cause undesired operation.
MADE IN KOREA
*Model : Carman Wi *Certificate Company : Nextech Co., Ltd./Korea *Certificate Number : NEX-CARMANWI-WLAN(A) *Certificate Date : 2007.8.28
47
WARRANTY CARD
Warranty Policy
1. The manufacturer warrants this product to be defect free in material and workmanship for a period of
one (1) year from the date of purchase. Defective products may be returned by the original purchaser
within the warranty period, postage pre-paid together with proof of purchase date to Nextech Co. LTD.
Defective products will be repaired at manufacturer’s discretion, replaced at no charge.
2. The warranty does not apply to any units that have been tampered with, or to damages incurred
through improper use and care, defects caused by abuse or through the usage for purposes other than
the intended use, used in a manner inconsistent with the instructions regarding use, and faulty packing
or mishandling by any common carrier.
3. Repairs not covered by this warranty will be performed at the current cost for parts and labor. In no
event will Nextech Co. Ltd’s liability exceed the price paid for the product from direct, indirect, special,
incidental or, consequential damages resulting from the use of this product, its accompanying software,
or its documentation without obligation to notify any individual or entity. Warranties hereunder extend
only to customers and are not transferable.
Warranty Period & Software update 1. Warranty period for Nextech products and these’s accessories including software card is one (1) year
from the date of sale to the original consumer.
2. Free Software update for Nextech products is one (1) year from date of purchase. After one (1) year
from purchase date, software updates will be optional and will require separate payment per request.
Repair Service 1. If you suspect that you have a problem with this product, please read the operation manual (guide)
carefully to ensure that you are operating this product properly.
2. If you conclude that a real problem exists, check your product according to the procedures on the
“Trouble Shooting Card” and mark your trial records in the blank.
3. Please return the main body or the troubled parts along with the “Trouble Shooting Card” to the repair
service center listed below. Be sure to return them in freight prepaid as we don’t accept freight collect.
Nextech Service Center North America Customer Service Center
Nextech Co. Ltd. Nextech America Inc.
E&C Venture Dream Tower(the 3rd) 13F 202 Fashion Lane suite 105
Guro-dong, 197-33 Guro-Gu, Seoul, Korea Tustin Ca, 92780 USA
Tel : (822)3140-1489 Fax : (822)3140-1449 Tel: (714)832-0100 Fax: (714)832-0123
Email : [email protected] Email: [email protected]
[email protected] Website: www.nex-tech.com/carman
48
WARRANTY CARD
Warranty Registration
Upon receiving the product, please fill out the following registration form and return either by fax or
separate mail to Nextech Service Center or North America Customer Service Center (only USA
customer) according to your area.
IMPORTANT: Any delay or missing of your warranty registration may cause disadvantage or
inconvenience to your warranty repair service.
CUSTOMER NAME _______________________________________________________________
COMPANY NAME _______________________________________________________________
ADDRESS _____________________________________________________________________
COUNTRY/STATE ________________________________________ ZIP __________________
TEL NO. _____________________________ FAX NO. ________________________________
EMAIL ADDRESS ______________________________________________________________
SERIAL NO ___________________________ LOT NO _______________________________
SOFTWARE VERSION __________________________________________________________
DEALERSHIP ___________________________________________________________________
DATE OF PURCHASE MONTH ____________ DAY ____________ YEAR _____________
___________________________________ ____________________________________
SIGNATURE DATE
49
Carman Wi Operation Manual
WARNING
COPYRIGHT No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of NEXTECH.
DISCLAIMER All information, illustrations, and specifications contained in this technical instruction manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without obligation to notify any person or organization of such revisions or changes. Further, NEXTECH shall not be liable for errors contained herein or for incidental or consequential damages (including lost profits) in connection with the furnishing, performance or use of this material.