CARBON & SULPHUR APPARATUSimg.tradeindia.com/fm/3210856/file.pdfMade of thick M.Steel sheet with...
Transcript of CARBON & SULPHUR APPARATUSimg.tradeindia.com/fm/3210856/file.pdfMade of thick M.Steel sheet with...
CARBON & SULPHUR APPARATUS
The determination of carbon and Sulphur contents in iron & steel has become an absolute
necessity for all chemical and metallurgical laboratories. Iron & steel plants, Foundries and
forging units etc. There is a substantial saving of time in a short time. The dual determination
is excellently suitable for Routing analysis.
(Different Range of Carbon Burette Available (0.25%, 0.5%, 1.5%, 4.5%)
To work on 220 / 230 volt A.C Supply.
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
DIGITAL MUFFLE
The Furnace outer body is made of thick Mild Steel
Sheet reattached with perforated sheet on
bottom portion and painted with attractive Power
Coated Paint.
Inner chamber made of ceramic grooved Tile Set,
heating elements are made of Kantha
coil form U Shape, insulation by ceramic Fiber Wool
heat resistance, Temp. Controlled by Digital
Temperature Controller fitted in
Furnace with L & T Contactor and
Thermocouple.
To work on 220 / 230 volt A.C Supply.
NOTE: High Temp. Furnace, upto 1450
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
AVAILABLE IN DIFFERENT SIZEINNER CHAMBER SIZE RATING
4” x 4” x 9” 3.0 KW
6” x 6” x 12” 4.0 KW
8” x 8” x 12” 5.0 KW
12” x 12” x 24” 8.0 KW
DIGITAL MUFFLE FURNACE
is made of thick Mild Steel
perforated sheet on the
bottom portion and painted with attractive Power
Inner chamber made of ceramic grooved Tile Set,
heating elements are made of Kanthal A–1 wire in
Shape, insulation by ceramic Fiber Wool
Temp. Controlled by Digital
fitted in front base of the
with L & T Contactor and Cr / Al
Supply.
pto 14500C is also available
We reserve the right to change the Design and specifications without Prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
AVAILABLE IN DIFFERENT SIZE RATING Max. Temp. Working Temp.
3.0 KW 1200 Deg. C 700 to 1100 Deg. C
4.0 KW 1200 Deg. C 700 to 1100 Deg. C
5.0 KW 1200 Deg. C 700 to 1100 Deg. C
.0 KW 1200 Deg. C 700 to 1100 Deg. C
FURNACE
We reserve the right to change the Design and specifications without Prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Working Temp.
700 to 1100 Deg. C
700 to 1100 Deg. C
700 to 1100 Deg. C
700 to 1100 Deg. C
Double Walled with two adjustable Shelves, inside made of thick Aluminium or Stainless Steel & outside of Mild Steel Sheet finished in Durable White Powder Coated Paint. The gap between two walls is filled with Pure Glass Wool to minimize loss of temperature.
Temperature can be controlled by Digital Temp. Controller or Thermostate. Different type
Temp. Range available 2000C, 250
Air Circulating Fan can be provided on request AT AN
Digital Control We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
TECHNICAL SPECIFICATION
Inner Chamber Size 14” x 14” x 14”
Power Supply Single Phase
HOT AIR OVEN
Double Walled with two adjustable Shelves, inside made of thick Aluminium or Stainless Steel outside of Mild Steel Sheet finished in Durable White Powder Coated Paint. The gap
between two walls is filled with Pure Glass Wool to minimize loss of temperature.
Temperature can be controlled by Digital Temp. Controller or Thermostate. Different type
C, 2500C, 3000C, 3500C. Air Circulating Fan can be provided on request AT AN EXTRA Cost.
Thermostatic Control
We reserve the right to change the Design and specifications without Prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
TECHNICAL SPECIFICATION
14” x 14” x 14” 18” x 18” x 18”
Single Phase Single Phase
Double Walled with two adjustable Shelves, inside made of thick Aluminium or Stainless Steel outside of Mild Steel Sheet finished in Durable White Powder Coated Paint. The gap
between two walls is filled with Pure Glass Wool to minimize loss of temperature.
Temperature can be controlled by Digital Temp. Controller or Thermostate. Different type of
Thermostatic Control
We reserve the right to change the Design and specifications without Prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
24” x 24” x 24”
Single Phase
LABORATORY DISC PULVERSIER
Laboratory Pulveriser is a Disc type grinder, especially designed to grind virtually material
(Sponge Iron / Concrete / Iron Ore)
with a rotary disc, having a planetary movement in a vertical plane.
Grinding is done in between two discs
high speed. A self locking device holds the hinged .
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
TECHNICAL SPECIFICATIONDisc Diameter
Max. Feed size
Discharge Size
Electric Motor
LABORATORY DISC PULVERSIER
Laboratory Pulveriser is a Disc type grinder, especially designed to grind virtually material
(Sponge Iron / Concrete / Iron Ore) to produce a fine mesh sample. It is self contained grind
with a rotary disc, having a planetary movement in a vertical plane.
Grinding is done in between two discs – one stationary and the other revolving eccentrically at
A self locking device holds the hinged
We reserve the right to change the Design and specifications without Prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
TECHNICAL SPECIFICATION Disc Diameter 175mm
Feed size Upto 6mm
Discharge Size 100 Mesh Approx.
Electric Motor 3 hp 3 Phase
LABORATORY DISC PULVERSIER
Laboratory Pulveriser is a Disc type grinder, especially designed to grind virtually material
to produce a fine mesh sample. It is self contained grinder
one stationary and the other revolving eccentrically at
We reserve the right to change the Design and specifications without Prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
LABORATORY JAW CRUSHER
This machine specially design for
preparation of Sample in lab testing.
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
TECHNICAL SPECIFICATION
Sponge Iron / Iron Ore
Jaw Size 4” x 6” 6” x 8”
Feed Size 25 – 30mm 45 –
Discharge Size 6 – 20mm 10 –
Motor 3 hp
Motor RPM 1440 rpm 1440 rpm
Power Supply 3 Phase 3 Phase
LABORATORY JAW CRUSHER
This machine specially design for crushing Iron Ore, Sponge Iron, coal
preparation of Sample in lab testing.
We reserve the right to change the Design and specifications without Prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
TECHNICAL SPECIFICATION
Sponge Iron / Iron Ore Coal / Concrete
6” x 8” 8” x 12” 4” x 10” 6” x 12”
– 50mm 65 – 70mm 25 – 30mm 45 –
– 22mm 12 – 25mm 6 – 20mm 10 –
5 hp 10 hp 3 hp 5 hp
1440 rpm 1440 rpm 1440 rpm 1440 rpm
3 Phase 3 Phase 3 Phase 3 Phase
LABORATORY JAW CRUSHER
coal and Concrete for
We reserve the right to change the Design and specifications without Prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
/ Concrete
6” x 12” 8” x 16”
50mm 65 – 70mm
22mm 12 – 25mm
5 hp 10 hp
1440 rpm 1440 rpm
3 Phase 3 Phase
LABORATORY HOT PLATE
This hot plate is very useful for continuous heating Upto maximum 2500C Rectangular plate
of cast iron Machined to a smooth & leveled surface having Insulated elements is fitted
on a robust mild steel body enamel painted. Temp. Controlled by Thermostate [500C to
2500C].
To work on 230 volts A.C complete with cord & plug.
(Hot Plate Rectangular)
This Round Shape Hot Plate is very useful for heating upto
2000C. Body of the plate is made of mild steel sheet Enamel
painted. The top of the plate is of 8” Diameter with Energy
Regulator
Dia : 8” Round
(Hot Plate Round)
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
AVAILABLE IN DIFFERENT SIZE SIZE RATING
10” [W] x 12” [L] x 6” [H] 1000 Watt
10” [W] x 16” [L] x 6” [H] 1200 Watt
12” [W] x 18” [L] x 6” [H] 2000 Watt
18” [W] x 24” [L] x 6” [H] 3000 Watt
MAGNETIC STIRRER & HEATING MANTLE
Outer Body made of Mild Steel Powder Coated with Stainless Steel Top. Stirring And Heating
Units Are Properly Insulated with Heating System, Temp. Is Controlled by an Energy
Regulator, Electronic Speed Controller and Teflon Coated
Paddle,
Magnetic Stirrer With three heat control and energy regulator.
Capacity : 500ml, 1 Liter, 2 Liter, 3 Liter, 5 Liter, 10 Liter,
`
Heating Mantle We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
TECHNICAL SPECIFICATION
Heating System Capacity 2 Ltr / 5 Ltr / 10 Ltr / 20 Ltr
Power Supply Single Phase
Temp. Range Upto 750C
TECHNICAL SPECIFICATION
Power Supply Single Phase
Temp. Range Max. 4000C
WATER DISTILLATION UNIT
This apparatus is used for Distilled Water, Outer Body made of Stainless Steel [SS 304 Grade
with Organ Welding] with electric Cord, Socket & Plug.
Wall Mounting Type Table Pattern Type
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
TECHNICAL SPECIFICATION
Wall Mounting Type Table Pattern Type
Water Capacity 3 / 4 Ltr Per Hour 6 Ltr Per Hour 8 / 9 Ltr Per Hour
Load 3 K.W 4 K.W 9 K.W
Power Supply Single Phase Single Phase Three Phase
SPECTRO POLISHING MACHINE
This machine is very useful for preparation of Spectro sample very fast and clean. Outer body
Made of thick M.Steel sheet with powder coated
rust proof paint.
Aluminium Oxide Disc 350mm Dia
Available in 60 Grit and 120 Grit.
Magnetic Holder also available for Micro
Sample
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
TECHNICAL SPECIFICATION
Motor for Disc 2hp 3 phase
Motor for Blower 1 hp 3 phase
Disc Size 350mm [14”]
Motor RPM 2800 / 1440 rpm
ON / OFF Switch L & T Make
LOAD on Disc Upto 1 Kg
ABRASIVE CUT – OFF MACHINE
The chop type cut off wheel machine is suitable for
quick and clean cutting of metallographic specimen from
rods & tubes etc. Abrasive cutter is rugged, sturdy and
designed to cut Metallurgical Samples to optimal quality
consistently and safely. Cutting Wheel spindle is
connected with motor shaft by pulley and belt
mechanism. The movement of cutting wheel towards the
specimen is applied by handle fixed with motor base pivot
spindle and the cutter unit is balanced by springs for
smooth chop type movement.
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
TECHNICAL SPECIFICATION
SENIOR MODEL JUNIOR MODEL
Cutting Cap. 3” Round 2” Round
Coolant Tank 50 Ltr 30 Ltr
Coolant Pump Tullu Type [Heavy] Tullu Type
Electric Motor 5 hp Three phase 3 hp Three phase
Cutting Wheel 250/300mm Dia 200/250mm Dia
Motor (rpm) 2800 rpm 2800 rpm
Vice Four side Movable Two side Movable
METALLURGICAL POLISHING MACHINE
Metallographic specimen polishing machine is suitable for the polishing of the specimen which
has been grinded. The specimen surface is very smooth after processing and can be used to
observe and measure the metallographic structure of specimen under microscope.
Double Disc Single Disc
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
TECHNICAL SPECIFICATION
Double Disc Polishing Machine Single Disc Polishing Machine
Electric Motor ½ hp + ½ hp ½ hp
Motor RPM 1440 rpm 1440 rpm
Power Supply Single Phase Single Phase
Disc Dia 8” Round with S.S. Wash Basin
DIGITAL BOMB CALORIMETER
Used for determination of heat combustion of organic Matter and calorific value and sulphur
content of coal, Solid and Liquid Fuels. The Bomb has a capacity of 300ml approx. a provided
with a high Pressure Schroder valve. Tested as per the requirement of Institute
Supplied with, Bomb Calorimeter Vessel with bomb support, Water Jacket, combined lid for
calorimeter Vessel and PUF Jacket, stirrer, connecting leads, connecting Tube to Connect
Bomb and pressure Gauge. Connecting Tube with fine Adjustment v
Gauge and Oxygen Cylinder pressure gauge on stand, spanner for Oxygen Tube Connection,
Ignition Wire (2metres) Nicrome, Cotton Reel, Stand For unit, pellets press, Digital Beckman
Thermometers ’O’ Ring small, ‘O’ ring for Stirrer,
Without oxygen cylinder.
To work on 220 / 230 volt AC Supply.
NOTE: Bomb Calorimeter with Printer
We reserve the right to change the Design and specifications without Prior
A-30, Nanda Road, Adarsh Nagar, Delhi Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
DIGITAL BOMB CALORIMETER
determination of heat combustion of organic Matter and calorific value and sulphur
content of coal, Solid and Liquid Fuels. The Bomb has a capacity of 300ml approx. a provided
with a high Pressure Schroder valve. Tested as per the requirement of Institute
Supplied with, Bomb Calorimeter Vessel with bomb support, Water Jacket, combined lid for
calorimeter Vessel and PUF Jacket, stirrer, connecting leads, connecting Tube to Connect
Bomb and pressure Gauge. Connecting Tube with fine Adjustment valve to Connect Pressure
Gauge and Oxygen Cylinder pressure gauge on stand, spanner for Oxygen Tube Connection,
Ignition Wire (2metres) Nicrome, Cotton Reel, Stand For unit, pellets press, Digital Beckman
Thermometers ’O’ Ring small, ‘O’ ring for Stirrer, Valve for Bomb and Valve Key.
To work on 220 / 230 volt AC Supply.
Printer also avaialble at an Extra Cost
We reserve the right to change the Design and specifications without Prior
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
DIGITAL BOMB CALORIMETER
determination of heat combustion of organic Matter and calorific value and sulphur
content of coal, Solid and Liquid Fuels. The Bomb has a capacity of 300ml approx. a provided
with a high Pressure Schroder valve. Tested as per the requirement of Institute of Petroleum.
Supplied with, Bomb Calorimeter Vessel with bomb support, Water Jacket, combined lid for
calorimeter Vessel and PUF Jacket, stirrer, connecting leads, connecting Tube to Connect
alve to Connect Pressure
Gauge and Oxygen Cylinder pressure gauge on stand, spanner for Oxygen Tube Connection,
Ignition Wire (2metres) Nicrome, Cotton Reel, Stand For unit, pellets press, Digital Beckman
Valve for Bomb and Valve Key. Supplied
We reserve the right to change the Design and specifications without Prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
WEIGHING BALANCES
Chainometic Balance
Plaform Balance
We reserve the right to change the Design and
A-30, Nanda Road, Adarsh Nagar, Delhi Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
TECHNICAL SPECIFICATIONTYPE CAPACITY
Digital Top Loading
Single Pan [Electrical] Chainometic Double Pan [Manual]
Platform Balance 60Kg to 500KgTo Work on 220 / 230 volt AC Supply
WEIGHING BALANCES
Chainometic Balance Single Pan Balance
Plaform Balance Digital Top Loading Balance
We reserve the right to change the Design and specifications without Prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
TECHNICAL SPECIFICATION CAPACITY READABILITY
220gm 0.001gm [3 Digit] 0.0001gm [4 Digit]
200gm 0.1mgm
200gm 0.1mgm
60Kg to 500Kg 5gm to 50gm To Work on 220 / 230 volt AC Supply
WEIGHING BALANCES
Single Pan Balance
Digital Top Loading Balance
specifications without Prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
MAKE Shimazdu / Excel
Leader / Dhona
Leader / Dhona
Excel
HOT MOUNTING PRESS
Metallurgical Mounting Press is designed
specimen in thermosetting plastic, we
offer Bakelite Mounting Press. The Unit
of a rugged construction and is activated
by a hydraulic press, capacity 10 tones.
The unit is provided with a pressure
gauge to read the pressure being applied
while mounting.
The Press is supplied complete with
Mould Heater, cooler and Thermometer.
As a standard outfit, 25mm dia.
NOTE: Mould assembly is supplied with
machine, other sizes if mould assembly
can be supplied as additional accessories
at an extra cost.
We reserve the right to change the
A-30, Nanda Road, Adarsh Nagar, Delhi Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
TECHNICAL SPECIFICATIONMould diameter
Hydraulic Jack
Temperature Range
Power Supply
HOT MOUNTING PRESS
is designed for permanent mounting of metallographic or rock
specimen in thermosetting plastic, we
offer Bakelite Mounting Press. The Unit
of a rugged construction and is activated
by a hydraulic press, capacity 10 tones.
The unit is provided with a pressure
read the pressure being applied
The Press is supplied complete with
Mould Heater, cooler and Thermometer.
NOTE: Mould assembly is supplied with
machine, other sizes if mould assembly
ditional accessories
We reserve the right to change the Design and specifications without Prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
TECHNICAL SPECIFICATION 25 / 32 / 40mm
10 TONE
0 to 300 Deg. C
Single Phase.
HOT MOUNTING PRESS
for permanent mounting of metallographic or rock
Design and specifications without Prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
LABORATORY ROLL CRUSHER
This Crusher specially designs for
Sample in lab testing.
We reserve the right to change the Design and specifications without Prior
A-30, Nanda Road, Adarsh Nagar, Delhi Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
TECHNICAL SPECIFICATION
Roller Size 4” x 8”
Feed Size 10mm
Discharge Size 2mm or above 2mm or above
Motor 3 hp
Motor RPM 1440 rpm
Power Supply 3 Phase
LABORATORY ROLL CRUSHER
specially designs for crushing Sponge Iron, coal and Concrete
We reserve the right to change the Design and specifications without Prior
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
TECHNICAL SPECIFICATION
4” x 10” 6” x 10” 6” x 12”
12mm 15mm 17mm
2mm or above 2mm or above 2mm or above
3 hp 3 hp 5 hp
1440 rpm 1440 rpm 1440 rpm
3 Phase 3 Phase 3 Phase
LABORATORY ROLL CRUSHER
and Concrete for preparation of
We reserve the right to change the Design and specifications without Prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
6” x 12” 10” x 12”
17mm 20mm
2mm or above 2mm or above
5 hp 5 hp
1440 rpm 1440 rpm
3 Phase 3 Phase
LABORATORY BELT GRINDER
Linisher is a continuous belt grinder. When the sample irregular, its surface needs leveling in
order to render it suitable for mounting. This is achieved on Linisher belt.
The Linisher consist of a continuous emery belt of size 4” width. The Belt travels on two
aluminium pullies, one of which is directly coupled to motor. The other pulley is fitted on a
spindle in a dolley which is spring loaded thus offering quick changing of worn out belts. The
design also incorporate axial adjustment to align the belt in proper position.
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
TECHNICAL SPECIFICATION Emery Belt Size 100 x 915mm
Electric Motor ½ hp Single Phase
Working Area 4” x 7” Approximately
THERMOCOUPLEINDICATOR
Cable for Thermocouples [PVC / Asbestos / Fiber Glass / Steel Breaded]
Temp. Controller
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
TECHNICAL SPECIFICATION
TYPE TEMP. RANGE
J – Type Upto 3000C
K – Type Upto 10000C
R – Type 13% Upto 16000C
R – Type 17% Upto 18000C
THERMOCOUPLES / CABLES / INDICATORS & CONTOLLER
Cable for Thermocouples [PVC / Asbestos / Fiber Glass / Steel Breaded]
Temp. Controller PID Controller Non Contact Temp. Gun
We reserve the right to change the Design and specifications without Prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
TECHNICAL SPECIFICATION
TEMP. RANGE
C
C
C
C
/ CABLES / & CONTOLLERS
Thermocouples
Cable for Thermocouples [PVC / Asbestos / Fiber Glass / Steel Breaded]
PID Controller Non Contact Temp. Gun
We reserve the right to change the Design and specifications without Prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
THERMOMETERS/HYDROMETERS
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
BAROMETER [DIAL TYPE]
DIGITAL BAROMETER
We reserve the right to change the Design and specifications without prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
BAROMETERS
BAROMETER [DIAL TYPE] FORTIN BAROMETER (Mercury)
DIGITAL BAROMETER
t to change the Design and specifications without prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
FORTIN BAROMETER (Mercury)
t to change the Design and specifications without prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
B.O.D INCUBATOR
Most versatile for Biochemical Oxygen Demand
determinations. Double walled with
and outer wall of M.S. Sheet duly powder coated. The
gap of 75 mm between the outer and
fitted with special grade glass wool to prevent
losses. Triple walled back of the unit is fitted with t
air circulatic fans for maintaining
uniformity throughout the chamber.
Temperature From 50C to 500c is controlled by Micro
Processor Digital Temperature
Controller with an accuracy of ± 0.
To work on 220/230 A.C. supply Single Phase.
NOTE: Automatic Voltage Stabilizer 3 KVA
At an Extra Cost
We reserve the right to change the Design and specifications without prior notice
A-30, Nanda Road, Adarsh Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
TECHNICAL SPECIFICATION
INNER CHAMBER SIZE
450 x 600 x 400mm (18” x 24” x 16”)
500 x 850 x 425mm (20” x 34” x 17”)
575 x 875 x 550mm (23” x 35” x 22”)
650 x 900 x 550mm (26” x 36” x 22”)
B.O.D INCUBATOR (Low Temp.)
Most versatile for Biochemical Oxygen Demand (BOD)
walled with inner chamber S.S.
and outer wall of M.S. Sheet duly powder coated. The
gap of 75 mm between the outer and the inner wall is
fitted with special grade glass wool to prevent thermal
losses. Triple walled back of the unit is fitted with two
fans for maintaining temperature
uniformity throughout the chamber.
c is controlled by Micro
Digital Temperature Indicator-Cum-
0.1°C.
supply Single Phase.
NOTE: Automatic Voltage Stabilizer 3 KVA
t to change the Design and specifications without prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
TECHNICAL SPECIFICATION
INNER CHAMBER SIZE CAPACITY
m (18” x 24” x 16”) 4 Cu ft
m (20” x 34” x 17”) 6.1 Cu
m (23” x 35” x 22”) 10 Cu
m (26” x 36” x 22”) 12 Cu ft (339
(Low Temp.)
t to change the Design and specifications without prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
.com
CAPACITY
ft (113 Ltr.)
ft (172 Ltr.)
ft (283 Ltr.)
12 Cu ft (339 Ltr.)
HUMIDITY CHAMBER
Suitable for carrying out different quality control tests under Controlled conditions of
temp. & humidity. Inner chamber consist of S.S. and outer wall of M.S sheet duly powder
coated. The gap of 75mm between the outer and inner wall in filled with special grade glass
wool / puf insulation to prevent Thermal losses. A self cooler air circulating fan is fitted
maintain uniform temp. And humidity Conditions throughout the chamber Temp. range from
50C above ambient to 600C is controlled by Digital Temp. & Humidity Controller with an
accuracy of +2%. Humidity is controlled through an HUMIDISTAT thus controlling
desire set humidity range from Atmospheric humidity to 9
NOTE: Cooling facility also available
at an extra cost.
To Work on 220 / 230 volt A.C Supply
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
INNER CHAMBER SIZES455 [W] x 710 [H] x 455mm [D]
605 [W] x 605 [H] x 605mm [D]
605 [W] x 910 [H] x 605mm [D]
HUMIDITY CHAMBER
Suitable for carrying out different quality control tests under Controlled conditions of
Inner chamber consist of S.S. and outer wall of M.S sheet duly powder
coated. The gap of 75mm between the outer and inner wall in filled with special grade glass
wool / puf insulation to prevent Thermal losses. A self cooler air circulating fan is fitted
maintain uniform temp. And humidity Conditions throughout the chamber Temp. range from
C is controlled by Digital Temp. & Humidity Controller with an
2%. Humidity is controlled through an HUMIDISTAT thus controlling
desire set humidity range from Atmospheric humidity to 900C + 30C.
NOTE: Cooling facility also available
Work on 220 / 230 volt A.C Supply
We reserve the right to change the Design and specifications without Prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
INNER CHAMBER SIZES 455 [W] x 710 [H] x 455mm [D]
605 [W] x 605 [H] x 605mm [D]
605 [W] x 910 [H] x 605mm [D]
HUMIDITY CHAMBER
Suitable for carrying out different quality control tests under Controlled conditions of
Inner chamber consist of S.S. and outer wall of M.S sheet duly powder
coated. The gap of 75mm between the outer and inner wall in filled with special grade glass
wool / puf insulation to prevent Thermal losses. A self cooler air circulating fan is fitted to
maintain uniform temp. And humidity Conditions throughout the chamber Temp. range from
C is controlled by Digital Temp. & Humidity Controller with an
2%. Humidity is controlled through an HUMIDISTAT thus controlling the
We reserve the right to change the Design and specifications without Prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Ph / CONDUCTIVITY / TDS / TURBIDITY METER
Ph METER [Table Model] Ph METER [Pen Type] TDS METER [Table Model] TDS METER [Pen Type]
CONDUCTIVITY METER [Table Model] TURBIDITY METER
We reserve the right to change the Design and specifications without prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
SALT SPRAY CHAMBER
FRP Chamber Salt Spray
We reserve the right to change the Design and specifications without prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
TECHNICAL SPECIFICATIONFEATURES
Wall
Inner Chamber
Outer Chamber
Temp. Control
Humidity
Humidity Controller
Temp. Accuracy
Humidity Accuracy
Inner Chamber Size
Test Standard
Power Supply
SALT SPRAY CHAMBER
FRP Chamber Salt Spray Acrylic Sheet Chamber
t to change the Design and specifications without prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
TECHNICAL SPECIFICATION FRP / SS SALT SPRAY ACRYLIC SHEET SALT SPRAY
Double Walled Single Walled
FRP / S.Steel Acrylic Sheet
Mild Steel Painted Acrylic Sheet
Ambient to 650C Upto 30
95% to 99% 90% to 95%
Fitted
+ 30C
+ 3% RH +
800 x 550 x 550mm 680 x 4
Customize Customize
220 / 230 volt 50Hz 220 / 230 volt 50Hz
SALT SPRAY CHAMBER
Acrylic Sheet Chamber
t to change the Design and specifications without prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
ACRYLIC SHEET SALT SPRAY
Single Walled
Acrylic Sheet
Acrylic Sheet
Upto 300C
90% to 95%
NIL
+ 50C
+ 5% RH
680 x 410 x 410mm
Customize
220 / 230 volt 50Hz
Double walled with inner chamber
S.S Sheet and outside of M.S. duly powder
coated. The gap between the walls is filled
with special Grade glass wool in order to
avoid thermal loses. A drain plug is also
fitted to the unit. The Inner chamber fitted
with immersions type heating element is
covered with perforated Removable diffuser
tray. The cover is provided with the unit as a
standard accessory. Temp. From ambient to
1000C is controlled by Digital Temperature
Controller.
NOTE: Water circulating pump / stirrer at
an extra cost.
To work on 220/230 volt A.C supply.
Double Walled with inner chamber made of S.S Sheet
and outside of M.S duly powder coated. Temperature
controlled by Thermostatic controller.
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
AVAILABLE INNER CHAMBERSIZES
300 x 250 x 100mm 6 Hole of 75mm dia
405 x 355 x 100mm 12 hole of 75mm dia
WATER BATH
Double walled with inner chamber made of
S.S Sheet and outside of M.S. duly powder
coated. The gap between the walls is filled
with special Grade glass wool in order to
avoid thermal loses. A drain plug is also
fitted to the unit. The Inner chamber fitted
with immersions type heating element is
covered with perforated Removable diffuser
tray. The cover is provided with the unit as a
standard accessory. Temp. From ambient to
C is controlled by Digital Temperature
NOTE: Water circulating pump / stirrer at
220/230 volt A.C supply. DIGITAL
Double Walled with inner chamber made of S.S Sheet
and outside of M.S duly powder coated. Temperature
controlled by Thermostatic controller.
THERMOSTATIC
We reserve the right to change the Design and specifications without Prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
AVAILABLE INNER CHAMBER
6 Hole of 75mm dia
12 hole of 75mm dia
DIGITAL
THERMOSTATIC
We reserve the right to change the Design and specifications without Prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
CROSS HATCH CUTTER
Cross Hatch cutter is suitable for checking adhesion of coating by cross cut method. This cutter
having single cutting blades. Test is carried out by performing crossed cuts at right angle. After
clear with Adhesionm Tape or brush. Can be used in accordance to ASTM D 3359 and IS 101.
We reserve the right to change the Design and specifications without prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
TECHNICAL SPECIFICATION
1mm x 11 Blades Coating Upto 60 Micron
2mm x 6 Blades Coating Upto 61 Micron to 120 Micron
3mm x 5 Blades Coating Upto 120 Micron to 250 Micron
PENCIL HARNDESS TESTER
Pencil Hardnerss Testert is suitable to determine the resistance of coating materials to scratch
effect on the surface. Can be used in accordance to ASTM D 3363 and IS 101.
In the test pwncils of various degrees of hardness are moved over the surface under a fixed
pressure and angle to the surface. The degree of hardness of the pencil which damages the
surface is taken as a measurement of scratch hardness.
AVAIALBLE RANGE OF PENCIL: 6B, 5B, 4B, 3B, 2B, B, HB, F, H, 3H, and 4H
We reserve the right to change the Design and specifications without prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
CONICAL MANDREL TESTER
Conical Mandrel is used for determination of extensibility of painted Panels, which are
clamped, is Position & Formed round the Conical Mandrel by rotating of the roller frame. The
200mm Mandrel tapers from 37mm to 6mm diameter which can be measured with the help of
scale. After test the panels are examined to determine Minimum diameter at which failure by
elongation occurs. Can be used in accordance to ASTM D 522 and ISO 6860.
We reserve the right to change the Design and specifications without prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
COATING THICKNESS GUAGE
INDIAN
We reserve the right to change the Design and specifications without prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax:
Email: [email protected]
TECHNICAL SPECIFICATION
TYPE
Coatmeasure M2
Coatmeasure C
Coatmeasure M & C
DEFELSKO USA
Pencil Thickness Guage
COATING THICKNESS GUAGE
DEFELSKO USA
t to change the Design and specifications without prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
TECHNICAL SPECIFICATION
BASE RANGE
Ferrous Model 0 – 2000 Micron
Non Ferrous Model 0 – 1250 Micron
Ferrous & Non Ferrous 0 – 2000 Micron
Ferrous Model 0 – 1000 Micron
0 – 250 Micron / 50 – 800 Micron
COATING THICKNESS GUAGE
PENCIL TYPE
t to change the Design and specifications without prior notice
27672780
RANGE
2000 Micron
1250 Micron
2000 Micron
1000 Micron
800 Micron
TUBULAR IMPACT TESTER
Many surface coating are subject to the risk of damage by Impact. Impact Tester allow
reproducible condition of Impact to be defined.
The instruments consist of a graduated vertical tube mounted into a solid base. This tube act as
a guide for an impacting weight of pre – determined mass. The height from this falls is variable.
We reserve the right to change the Design and specifications without prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
TECHNICAL SPECIFICATION
Standard Tube Length 25” and 40”
Different Weight 2 LB, 4 LB and 6 LB
PORTABLE GLOSS METER
Compact, portable, sensitive & accurate handy instrument, battery operated for the
measurement of different geometry 45 degree, 60 degree, 85 degree. Suitable to check gloss
value of curved as well as flat surfaces, tiny and large objects.
• Portable Gloss Meter with a Micro Controller base display and rechargeable batteries.
• Unit is small and light weight
• HOLD Facility
We reserve the right to change the Design and specifications without prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
SHADE CARD
RAL SHADE CARD
Available 210 Shads in the form of different sizes.
PANTONE SHADE CARD
Pantone provides an accurate method for
selection, specification. Available in Solid
uncoated and solid coated.
Each colour identify by unique Pantone
names and number.
We reserve the right to change the Design and specifications without prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
TECHNICAL SPECIFICATION
RAL K7
• 5 Colors per page
• Fan Deck Size 1.97” x 5.9”, Color Sample 1.97” x .79”
• Gloss
RAL K5
• Well Suited for Color Combination & Comparison
• Full Page Color Sample 1.97” x 5.9”
• Semi Matte or Gloss
• U Shaped Protective cover
RAL K1
• 16 Colors per page
• Booklet Size 4.09” x 7.48”, Color Sample 1.1” x .71”
• Gloss
COLOUR MATCHING CABINET
This Color comparison light Cabinet is suitable to stimulate different lighting condition & obtain an objective assessment of colour.
• Fluorescent artificial day light
• Incandescent tungsten filament lamp
• Ultra violet black light lamp
• TL 84
• Cool White Fluorescent
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
TECHNICAL SPECIFICATION
Inner Chamber Size 28” x 20” x 16” Approx.
Power Supply Single Phase
TUMBLER DRUM
It shall consist of a Circular Drum of 1000mm inside dia
Constructed of Mild Steel plate at Least 5mm thickness. The Drum shall be replaced whenever
the thickness of the plate is produced by angle lifter 50 x
50 x 5mm shall be solidly attached longitudinally over the
entire length of the inner side of the Drum by riveting in
such manner as to prevent a accumulation of material
between the lifter and the drum. The
axis shall not be more than 700mm from the floor.
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
TECHNICAL SPECIFICATION
Motor 1.75 hp Gear Motor
Drum RPM 25 or 26 rpm
Motor RPM 1440 rpm
Power Supply 3 Phase
TUMBLER DRUM
It shall consist of a Circular Drum of 1000mm inside dia and 500mm inside length and shall be
Constructed of Mild Steel plate at Least 5mm thickness. The Drum shall be replaced whenever
the thickness of the plate is produced by angle lifter 50 x
50 x 5mm shall be solidly attached longitudinally over the
e length of the inner side of the Drum by riveting in
such manner as to prevent a accumulation of material
ifter and the drum. The light of the drum
axis shall not be more than 700mm from the floor.
We reserve the right to change the Design and specifications without Prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
TECHNICAL SPECIFICATION
Gear Motor
25 or 26 rpm
1440 rpm
3 Phase
TUMBLER DRUM
and 500mm inside length and shall be
Constructed of Mild Steel plate at Least 5mm thickness. The Drum shall be replaced whenever
We reserve the right to change the Design and specifications without Prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
ROTAP SIEVE SHAKER
The Gyratory Sieve Shaker is Durable Constructed suitable for 6 No. of 12” Dia & 18” Dia
Sieves with Lid and Receiver. Running parts operate under Oil, Machine is easily installed
reproduced the circular and the tapping motion with a mechanical action.
NOTE:
1. Different Size of Test Sieves also
available AT AN Extra Cost.
2. Timer also available At an Extra Cost
To Work on 220 / 230 volt A.C Supply
.
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected], [email protected]
TECHNICAL SPECIFICATION
Electric Motor 0.75 hp
Power Supply Single Phase
RPM 1440 rpm
PLATINUM CRUCIBLE & LID VOLATILE MATTER CRUCIBLE & LID
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
TECHNICAL SPECIFICATION
PARTICULAR
Platinum Crucible
Nickel Crucible
V M Crucible
Silica Crucible
CRUCIBLES
PLATINUM CRUCIBLE & LID NICKEL CRUCIBLE & LID
VOLATILE MATTER CRUCIBLE & LID SILICA CRUCIBLE & LID
We reserve the right to change the Design and specifications without Prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
TECHNICAL SPECIFICATION
CAPACITY
10ml, 25ml, 50ml
25ml, 50ml, 100ml
15ml
25ml, 50ml, 80ml
NICKEL CRUCIBLE & LID
SILICA CRUCIBLE & LID
We reserve the right to change the Design and specifications without Prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
10ml, 25ml, 50ml
25ml, 50ml, 100ml
25ml, 50ml, 80ml
LAB SOLVENTS & GLASSWARES
We reserve the right to change the Design and specifications without Prior notice
A-30, Nanda Road, Adarsh Nagar, Delhi Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
Email: [email protected]
LAB SOLVENTS & GLASSWARES
We reserve the right to change the Design and specifications without Prior notice
30, Nanda Road, Adarsh Nagar, Delhi – 110033 Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780
[email protected], [email protected]
LAB SOLVENTS & GLASSWARES
We reserve the right to change the Design and specifications without Prior notice
Mob No. 9310448182, 9810448182, Tel No: 27672914, Telfax: 27672780