Safety and quality are among the demands placed on modern materials used in the automotive industry. Continuous improvements in the products and components are the declared objectives of all car manufacturers and a justified desire of end consumers. These require continuous control during the development of parts and system components, beginning with the raw material right through to the end product itself. The close collaboration between qualified, independent testing laboratories and automotive component suppliers guarantees that the car manufacturers' requirements in terms of initial sample testing and serial sample testing are fulfilled.

Qualified solutions are our business

With many years of experience in the field of analytics behind it, SGS guarantees you security and reliability so that you can focus on your core business. SGS has clustered many different functional competencies for the automotive industry in CTS Automotive. Functional and methodological expertise in several functional disciplines is necessary to offer solutions from one source - no matter how complex the problem is.

SGS CTS Automotive has a flexible accreditation - suited to every new method that is introduced.

We are accepted by major automotive OEMs, which is reflected in our numerous approvals and recommendations.

CAR INTERIOR MATERIAL TESTING METHODS

DESCRIPTION

Chrome-Plated Surfaces; Determination of Potential differences and Layer Thickness of Nickel Coatings

Vehicle Parts Testing of Resistance to Environmental Cycle Test (+80/-40) °C

Body and Add-on Parts; Corrosion Test

Surface Paint, Varnishes; Resistance to Stone Impact (VDA Method)

PVC and PVC Mixed Polymer; Thermal Stability Test

Non-Metallic Materials Exposure Test of Passenger Compartment Components

Non-Metallic Materials Exposure Test for Determining the Tackiness of Polypropylene Parts

Non-Metallic Materials; UV Radiation on Thermoplastic Material, Outside, in Sun

Clear Coat for Dual-Layer Metallic Paint Coatings; Testing for Resistance to Cracking

Fahrzeugteile; Prüfung der Klimawechselfestigkeit

Non-Metallic Planar Materials; Floating Roller Peel Test

Non-Metallic Materials for Interior Trim Determining Condensable Constituents (G)

Elastomer-Bauteile; Plastische und elastische Verformbarkeit

Non-Metallic Materials in Automotive Interior TrimDeterminination of organic compounds

Insulating Material; Behavior during Flame Exposure with a Burner; Surface and Edge Flame Exposure

Components in Passenger CompartmentOdor Test

METHOD

PV 1065

PV 1200

PV 1210

PV 1213

PV 1300

PV 1303

PV 1306

PV 1323

PV 1502

PV 2005

PV 2034

PV 3015

PV 3307

PV 3341

PV 3357

PV 3900

VOLKSWAGEN AUDI

Non-Metallic Materials Weathering in Dry, Hot Climate

Non-Metallic Materials Weathering in Moist, Hot Climate

Amine Emissions from PUR Flexible Foam; Indicator Method

Determining Organic Emissions from Components for the Passenger Compartment of Motor Vehicles Emission Test

Plastic Interior Components; Testing of Scratch Resistance

Surfaces in the Vehicle Interior; Test of Resistance to Creams and Lotions

Determining/Evaluating the Corrosion Effect of Elastomers on Electrolyte Copper

Scrub Resistance of High-Gloss Surfaces in the Vehicle Interior

Paint coatings on exterior plastic parts - Requirements

Paint coating on materials used in the vehicle interior trim - Requirements

Labels Self-Adhesive, Material Requirements

ABS and PC Polymer Blends Material Requirements

"Nonwoven Fabric, Thermoplastically Bonded Material Requirements

PA6, glass-fiber reinforced, finished parts - Material requirements

CFRP Components; Material Requirements and Componet Requirements

PUR Flexible Foam for Vehicle Seats Material Requirements

Engine Encapsulation and Stone Guard Underbody Applications, Test Scope for Components

PMMA, High Gloss Trims for the Exterior, Material Requirements

PA66, Glass Fiber-Reinforced, for Finished Parts Carrying Coolant; Material Requirements

Soft PVC, Weather-Proof; Material Requirements

ABS graft polymer, finished parts - Material Requirements

Chrome-Plated Plastic Parts - Material Requirements

High-Density Polyethylene; Materials Requirements

Polyamide 6, Finished Part; Material Requirements

Materials for Vehicle Interiors; Burning Behavior; Material Requirements

Schaumstoff-Klebeband, beidseitig klebend; Werkstoffanforderungen

Foamed Leatherette with Blend-Knit Fabric; Material Requirements

PP/EPDM/PE Polymer Blend, Finished Parts; Material Requirements

PUR Integral Foam for Steering-Wheel Coating; Material Requirements

Polypropylene, Elastomer-Modified,Talc- Modified or Mineral-Modified; Material Requirements

ZSB Instrumententafel und Kniefänger, Werkstoffanforderungen

ASA Graft Polymer; Material Requirements

POM; Material Requirements

Elastomers; Material Requirements and Testing

Polypropylene, Finished Parts Material Requirements

PV 3929

PV 3930

PV 3937

PV 3942

PV 3952

PV 3964

PV 3974

PV 3975

TL 211

TL 226

TL 52038

TL 52231

TL 52411

TL 52440

TL 52642

TL 52653

TL 52660

TL 52671

TL 52682

TL 526

TL 527

TL 528

TL 533

TL 534

TL 1010

TL 52018

TL 52028

TL 52035

TL 52045

TL 52283

TL 52296

TL 52311

TL 52476

VW 2.8.1

VW 44045

METHOD DESCRIPTION

PV 3905

PV 3906

PV 3922

PV 3925

Organic Materials; Ball Drop Test

Non-Metallic Planar Materials; Testing of Abrasion Behavior

Planar Fabrics and Molded Parts; Oil- and Water-Repellemt Behaviour

Determining Organic Emissions from Componentsfor the Passenger Compartment of Motor VehiclesEmission Test

BMW

DESCRIPTION

Sun cream resistance of painted partsin the interior

Formaldehyde emission from nonmetallicmaterials and components, determined by HPLC

Determination of multi impact stone chip resistance

Reflectometer Value (Gloss)

Cross hatch testing

Adhesion test at low temperature by bowl drop test on process materials

Condensation Water Constant Atmosphere Test

Paint Compatibility Test

Saltspray-Test

Abrasion Test of Leather by Means of a Ball Plate

Staining Behavior and Cleaning Ability of Leather

Universal Scratch Tester

Bending stiftness; Two-point procedure

Taber-Abrasion Test Leather

Accelerated weathering crack stability

Aging Resistance Test

Accelerated weathering colour stability

Abrasion Resistance using the Abrex Test Equipment

Hydrolysis Test

Coatings of parts und made of metallic materials by means of organic materials; Requirements and test

Requalification of product and process at thesupplier; Process, checklist

Marking of parts with trademark and part identification data

Marking of Parts; Trademark for Marking of Parts

Marking of Parts; Marking of Materials

Marking of parts Marking with date of manufacture

Grain process for injection molded componentswith visible plastic surfaces

METHOD

AA-0053

AA-0061

AA-0079

AA-0101

AA-0180

AA-0187

AA-0213

AA-0244

AA-0324

AA-0412

AA-0419

AA-0546

AA-0551

AA-0564

AA-0235

AA-P 275

AA-P 288

AA-P 296

AA-P 308

GS 90011

GS 90018

GS 91001

GS 91002

GS 91003

GS 91004

GS 91009

METHOD DESCRIPTION

Polyamide 6 Finished Parts in the Passenger Compartment Material Requirements

Bonded Coating-Covered Body Seals; Requirements and Tests

Foamed Leatherette; Material Requirements

PA66 for Finished Parts Outside the Vehicle Interio; Material Requirements

Emission behavior of components in passenger compartment

VW 50125

VW 50129

VW 50132

VW 50133

VW 50179

VW 50180

VW 50185

VW 50190

VW 50195

VW 80101

Components in Passenger Compartment; Emission Behavior

Vehicle Components; Resistance to Open Air Weathering

Interior Trim Components; Metrological Evaluation of Color and Gloss Level Visual Evaluation of Chrome Surfaces

Colorimetric Evaluation of Automobile Paint Coatings

Electrical and Electronic Assemblies in Motor Vehicles; General Test Conditions

Circuit carriers in motor vehicles Dewing test

Circuit carriers in motor vehicles Qualification of conformal coatings

Trim parts with PVC-Slush coating Delivery and test conditions

Emissions measurement in SHED chambers Determination of volatile, organic emissions from fuel carrying or fuel vapor carrying components

Emissions measurement in SHED chambers Determination of volatile, organic emissions from components, semi-finished products and materials that do not carry fuel

Emissions measurement with air exchange in atesting chamber Determination of volatile, organic emissions from components, semi-finished products and materials

Coatings on plastic parts Electroplated plastic parts Requirements, tests

Elastomers Determination of the resistance to test-blow by

Decorative and accentuated surfaces in the interior Releases, Quality assurance

Surface test of motor vehicle interior materials Manual abrasion test

Surface test of motor vehicle interior materials Finger nail test

Surface test of motor vehicle interior materials Shoe sole test

Surface test of motor vehicle interior materials Color abrasion behavior

Surface test of motor vehicle interior materials Resistance to cleaning agents

Surface test of motor vehicle interior materials Soiling behavior and cleaning ability

Surface test of motor vehicle interior materials Drop test

Surface test of motor vehicle interior materials Determination of the scratch inclination

Surface test of motor vehicle interior materials Scratch test

Manual Abrasion test of Motor Vehicle Interior Materials

Polyurethane integral foam in RRIM procedure Delivery conditions

Dynamic mechanical analysis (DMA)on polymers

Datermination of berning behaviour to automotive interior trim materials

Coatings on plastic partsPainted plastic parts in exterior, interior and engine compartment Test scope, sample preparation

Coatings on plastic parts Painted plastic parts in exterior, interior and engine compartment Test certificates

Trim parts with PUR-RIM-Overmould coating Delivery and test conditions

Trim parts with IMC-TPU-Slush coating Delivery and test conditions Ausdrucke

Trim parts with IMC-PVC-Slush coating Delivery and test conditions

Closing Plug Fitting plug Types, finishes, testing conditions

Closing plug Paint plug Types, finishes, testing conditions

Self-adhesive lables Requirenments, testings

Self-adhesive decorative and functional foils Requirements, testings

GS 95011-4

GS 95011--5

GS 97012

GS 97014-1

GS 97014-2

GS 97014-3

GS 97017

GS 97018

GS 97033

GS 97034-1

GS 97034-2

GS 97034-3

GS 97034-4

GS 97034-5

GS 97034-6

GS 97034-7

GS 97034-8

GS 97034-9

GS 97034

GS 97035

GS 97036

GS 97038

GS 97045-1

GS 97045-2

GS 97049

GS 97050

GS 97051

GS 97056

GS 97057

GS 97058

GS 97059

GS 93022

GS 93026-1

GS 95003-3

GS 95003-4

GS 95003-4

GS 95003-5

Plastics Pressable Thermoplastics Requirements and testings

Textiles of the vehicle interior Requirements and Testings

Electrical/electronic assemblies in motor vehicles Mechanical requirements

Electrical/Electronic Assemblies in Motor Vehicles Climatic Requirements

Electrical/Electronic Assemblies in Motor Vehicles Climatic Requirements

Electrical/Electronic Assemblies in Motor Vehicles Chemical Requirements

METHOD DESCRIPTION

DAIMLER

DESCRIPTION

Supply Specification; General Technical Delivery Conditions and Test Methods for Interior Equipment Materials and Similar Products

Supply Specification, Flame retardant properties; interior trim parts; Requirements and test specifications

Supply specification - Leather for interior equipment

Supply specification - Artificial leather binding

Supply specification - Woven artificial leather cloth

Supply specification - Films and sheets

Supply specification - Tricot imitation leather

Supply specification - Nonwoven artifical leather

Supply specification - Foamed and compact artificial leather

Supply specification - Scrim fabrics

Supply specification - Deep-drawn sheeting

Supply specification - Foam films and sheeting

Supply specification - Polyolefin film

Supply specification - Polyurethane and other films for sound insulation materials and trim parts

Supply specification - Laminated surface materials for interior applications

Supply specification - Molded skins (spray and powder-cast skins) made of TPU, polyolefine and PVC

Supply specification - Soiling/cleaning of interior equipment parts/materials

Supply specification - Parts made of thermosetting plastics used in engine and assembly areas

Supply Specification Parts Manufactured from Thermoplastics for the Direct and Indirect Areas of the Passenger Compartment, for Passenger Compartment Heating and Ventilation, Paneling and Housings

Supply specification - Thermoplastic parts, reservoirs for brake and windshield washer fluids

Supply specification - Thermoplastic partsfor engine air management

Supply Specification Thermoplastic parts for control elements, bearing elements, fasteners, and spacers

Supply specification - Plastic moldings manufactured from plasticized PVC

Supply Specification Parts Manufactured from Thermoplastics for Paneling, Housings and Functional Parts for External Applications

Supply specification - Molded parts manufactured from long-fiber-reinforced thermoplastics, hot pressed

Supply specification - Injection moulded parts manufactured from fibre reinforced thermoplastics for structural requirements

®Supply specification - Thermoplastic partsin continuous contact with urea solution AdBlue

Supply specification - Polyurethane foam with large pores

Supply specification - Foam-molded flexible cellularpolyurethane-based materials

Supply specification - Substrate made of reinforced polyurethane foam

METHOD

DBL 5306

DBL 5307

DBL 5310

DBL 5329

DBL 5330

DBL 5333

DBL 5338

DBL 5345

DBL 5348

DBL 5349

DBL 5352

DBL 5353

DBL 5354

DBL 5357

DBL 5361

DBL 5381

DBL 5399

DBL 5401

DBL 5404

DBL 5407

DBL 5408

DBL 5410

DBL 5412

DBL 5416

DBL 5417

DBL 5418

DBL 5419

DBL 5451

DBL 5452

DBL 5453

METHOD DESCRIPTION

GS 97061

PR 303.5

PR 306.4

Structural foam Requirements, testings

Alternating climate test for trim parts

Sun simulation test for trim parts

Supply specification - Parts manufactured from energy-absorbing foams for exteriors

Supply specification - Molded rigid and semi-rigid foams

Supply specification - Light multi-layer sound insulations for internal and external applications

Supply specification - Raw materials for polyurethane foams

Supply specification - Polyurethane integral foam for interior trim parts

Supply Specification Trim and molded padded parts for vehicle interiors (composite parts)

Supply specification - Substrate material in sandwich design

Supply specification - Multi-layer composite film for interior equipment sensor systems

Supply specification - Extruded plastic panels capable of deep drawing

Supply Specification - Plastic components manufactured from recycled materials

Supply Specification; Finished Parts and Semi-Finished Products Made of Organic Polymer Materials; General Conditions and Test Methods

Supply specification - Moulded elastomer parts subject to normal mechanical requirements

Supply specification - Elastomer parts subject to mechanical-dynamic stress, suitable for thermal stressing up to 175 °C

Elastomer parts subject to high and extremely high mechanical-dynamics stress, suitable for thermal stressing up to 100° C

Supply specification - Parts manufactured from thermoplastic polyurethane elastomers (TPU) temperature application range up to 120 °C

Supply specification - Elastomer parts suitable for thermal stressing from 80 to 130 °C, with moderate resistance to lubricants and fuels

Supply specification - Thermoplastic elastomers (TPE)

Supply specification - Elastomer parts suitable for thermal stressing from 70 to 120 °C, with good resistance to lubricants, fuels and coolants

Supply specification - Elastomere parts thermically stressable 120 °C to 140 °C, weathering resistant and moderate resistance to greases and fuels

Elastomer parts heat-tolerant to 120 to 150 degree C, with good resistance to lubricants and fuels

Supply specification - Elastomer parts heat-tolerant for 140 °C to 175 °C, with good resistance to petroleum products

Supply specification - Elastomer parts heat-tolerant for 150 °C to 250 °C, moderately resistant to petroleum-based products

Supply specification - Elastomer parts heat-tolerant to 200 to 275 °C, with good resistance to automotive fuel

Supply specification - Polymer parts with no adverse effect on painting processes

Supply specification - Sealing sections/molded parts manufactured from elastomers, mainly in body areasuitable for short-term thermal loads of 70 °C to 100 °C

Supply specification - Moldings and extrusions manufactured from sponge rubber (foamed elastomers with open and closed cell structure)

Supply specification - Moldings and hoses manufactured from cellular rubber (pored elastomers with closed cells)

Supply specification - Textile-flocked elastomer parts for body seals and plastic parts for vehicle interior

DBL 5461

DBL 5462

DBL 5463

DBL 5467

DBL 5468

DBL 5471

DBL 5472

DBL 5474

DBL 5481

DBL 5490

DBL 5555

DBL 5556

DBL 5557

DBL 5558

DBL 5559

DBL 5561

DBL 5562

DBL 5563

DBL 5564

DBL 5565

DBL 5567

DBL 5568

DBL 5569

DBL 5570

DBL 5571

DBL 5573

DBL 5574

DBL 5575

METHOD DESCRIPTION

DBL 5454

DBL 5455

DBL 5456

DBL 5460

Supply specification - Covered foam

Supply specification - Polyolefin foam

Supply specification - Composite foam blocks forinterior applications foreword

Supply specification - Parts manufactured from energy-absorbing foams for interiors

Supply specification - Velour fabric

Supply specification - Nonwoven micro fiber fabric

Supply Specification - Upholstery plush

Supply Specification - Polyacrylonnitrile velour

Supply specification - Velour carpet

Supply Specification - Upholstery fabric. Mixed weave

Supply specification - Upholstery nettle cloth

Supply specification - Jute fabric

Supply specification - Needlefelt fabrics

Supply specification - Nonwoven fleece

Supply Specification - Synthetic upholstery fabric

Supply Specification - Woven upholstery fabric

Supply Specification - Synthetic upholstery fabric

Supply specification - Woven upholstery fabric

Supply specification - Piping

Supply specification - Tricot tape

Supply specification - Tubular tricot tape

Supply Specification - Tapes

Supply specification – Fully synthetic twisted yarn

Supply specification – Padding

Supply specification - O-rings and molded seals manufactured from elastomers

Supply Specification Coating of plastic parts in vehicle interiors

Supply specification - Coating/painting for parts subject to moderate exposure to corrosion stress

Supply specification - Self-adhesive labels

Supply specification - Electroplated parts manufactured from plastics with metallic coatings

Supply SpecificationGeneral RequirementsEnvironmental protection, hazardous substances, dangerous goods Negative substance list for the selection of materials

Supply specification - Decorative parts in vehicle interiors

DBL 5815

DBL 5816

DBL 5819

DBL 5836

DBL 5853

DBL 5855

DBL 5860

DBL 5864

DBL 5868

DBL 5869

DBL 5881

DBL 5882

DBL 5883

DBL 5884

DBL 5911

DBL 5919

DBL 5937

DBL 5939

DBL 5943

DBL 5955

DBL 6038

DBL 7384

DBL 7392

DBL 8230

DBL 8465

DBL 8585

DBL 9202

DIN EN ISO

DESCRIPTION

Colorimetry - Part 1 - 9

Description of yellowness of near-white or near-colourless materials

Colorimetric evaluation of colour differences of surface colours according to DIN99-formula

Electroplated coatings - Modified Corrodkote corrosion test (mod. Corr-Test)

METHOD DESCRIPTION

DBL 5578

DBL 5767

DBL 5768

DBL 5809

Supply Specification - Elastomer parts with anti-friction coating

Supply Specification - Cardboard

Supply Specification - Pressure Moulded Wood Fibre Materials

Supply Specification - Knitted fabrics

METHOD

DIN 5033-1

DIN 6167

DIN 6174

DIN 50958

Metallic coatings - Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium on plastics materials

Testing of paper and board - Determination of abrasion by the abrasion wheel method

Testing of paper and board - Basic parameters for determination of reflectance factor - Part 1: Measurements made on non-fluorescent specimens Part 2: Measurements made on fluorescent specimens

Testing of colouring materials; conditions of measurement and evaluation for the determination of colour differences for paint coatings, similar coatings and plastics

Testing of plastics films and coated textile fabrics, manufactured using plastics; determination of stiffness in bending, method according to Ohlsen

Testing of synthetic leather and similar sheet materials; Tear growth test

Testing of plastics sheets; adhesion test

Testing artificial leather and similar sheet materials; determination of the total elongation (statical elongation) and irreversible elongation

Testing of plastic films - Tear test using trapezoidal test specimen with incision

Testing of plastics films - Determination of the thickness by mechanical scanning

Testing of plastic films - Determination of dimensional stability

Testing of plastics; determination of the percentage of styrene in reaction moulding materials based on unsaturated polyester resins; gaschromatography method

Determination of the behaviour of cellular plastics when exposed to fluids, vapours and solids

Testing of plastics; bending test and impact test on dynstat test pieces

Testing of electroplated plastic parts - temperature change test

Testing of Plastics; Hot Storage Test on Mouldings Made of Thermoplastic Moulding Materials without External Mechanical Stressing

Testing of rubber - determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test

Testing of rubber - Shore A and Shore D hardness test

Testing of rubber - Accelerated ageing

Rubber, vulcanized or thermoplastic — Resistance to ozone cracking

Testing of rubber - Determination of rebound resilience (Schob pendulum)

Determination of low-temperature behaviour of elastomers; principles and test methods

Flexible cellular polymeric materials – Determination of stress-strain characteristics in compressionPart 1: Low-density materials

Testing of flexible cellular materials - Indentation test on finished parts

Testing of plastics; determination of water content by titration according to Karl Fischer

Testing of plastics; determination of the coefficient of linear thermal expansion

Testing of plastics; determination of abrasion, abrasive disk method

Testing of textiles; determination of linear density of single and plied yarns; simple yarns and plied yarns, textured yarns, short length method

DIN 53100

DIN 53109

DIN 53145

(1-2)

DIN 53236

DIN 53350

DIN 53356

DIN 53357

DIN 53360

DIN 53363

DIN 53370

DIN 53377

DIN 53394-2

DIN 53428

DIN 53435

DIN 53496

DIN 53497

DIN 53504

DIN 53505

DIN 53508

DIN 53509 (Teil1-2)

DIN 53512

DIN 53545

DIN EN ISO

3386-1

DIN 53579

DIN 53715

DIN 53752

DIN 53754

DIN 53830-3

METHOD DESCRIPTION

DIN 52347

DIN 52612-2

Testing of glass and plastics; abrasion test; method using abrasion wheels and measurement of scattered light

Tesing of thermal insulating materials; determination of thermal conductivity by means of the guarded hot plate apparatus; conversion of the measured values for building applications

Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration

Testing of textiles - Coatings and attendant materials - Part 1: Determination of materials soluble in organic solvents

Reflectometer as a means for gloss assessment of plane surfaces of paint coatings and plastics

Polyamide tubing for motor vehicles

Cooling pipes in motor vehicles - Hoses and compounds - Part 2: Requirements, testing

Air braking systems; coiled tubing

Air braking systems - Thermoplastic tubing - Part 1: Requirements and tests

Determination of burning behaviour of interior materials in motor vehicles

Determination of the windscreen fogging characteristics of trim materials in motor vehicles

Ageing Automobile Components in Solar Simulation Units

Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version

Particleboards and fibreboards; determination of swelling in thickness after immersion in water; German version

Wood-based panels; determination of moisture content; German version

Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board; German version

Wood-based panels - Determination of formaldehyde release

Textiles; woven fabrics; construction; methods of analysis; part 2: determination of number of threads per unit length

Textiles - Fabrics - Determination of width and length

Rubber or plastics coated fabrics - Low temperatures tests - Part 1: Bending test

Textiles - Fabrics - Determination of mass per unit area using small samples

Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics;

Leather � Chemical tests �Determination of the content of pentachlorophenol in leather

Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified); German version EN 14869-2:2011

Textiles - Tests for colour fastness

Adhesives; peel test for a flexible-bonded-to-rigid test specimen assembly; part 1: 90° peel

Textiles; test method for nonwovens; part 1: determination of mass per unit area

Environmental testing

Plastics - Determination of water absorption

Plastics; Determination of temperature of deflection under load

Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour

Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining

Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating

Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration

Textiles - Tests for colour fastness - Part Z06: Evaluation of dye and pigment migration

DIN EN ISO

105-E04

DIN 54278-1

DIN 67530

DIN 73378

DIN 73411-2

DIN 74323

DIN 74324-1

DIN 75200

DIN 75201

DIN 75220

DIN EN 310

DIN EN 317

DIN EN 322

DIN EN 646

DIN EN 717 (Teil1-3)

DIN EN 1049-2

DIN EN 1773

DIN EN 1876

DIN EN 12127

DIN EN 13130-4

DIN EN 14494

DIN EN 14869-2

DIN EN 20105-

(A02-A-03)

DIN EN 28510-1

DIN EN 29073

DIN EN 60068

DIN EN ISO 62

DIN EN ISO 75-

(Teil1-3)

DIN EN ISO 105-A02

DIN EN ISO 105-A03

DIN EN ISO 105-A05

DIN EN ISO 105-E04

DIN EN ISO 105-Z06

DIN 53863-2

DIN 53892-2

Testing of textiles; abrasion test methods for textile fabrics, rotary abrasion test

Testing of textiles; determination of dimensional change of woven fabrics subjected to the repeated attack of moisture an dry air

METHOD DESCRIPTION

DESCRIPTION

Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test

Textiles - Tests for colour fastness - Part X05: Colour fastness to organic solvents

Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing

Textiles - Standard atmospheres for conditioning and testing

Plastics - Determination of flexural properties

Plastics - Determination of Charpy impact properties

Plastics - Determination of Izod impact strength

Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)

Plastics - Polyamides - Determination of viscosity number

Plastics - Determination of tensile properties

Celluar plastics and rubbers - Determination of apparent (bulk) density

Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1

Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content; calcination methods

Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method

Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown

Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown

Paints and varnishes - Bend test (cylindrical mandrel)

Flexible cellular polymeric materials - Determination of tensile strength and elongation at break

Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin

Flexible cellular polymeric materials - Determination of compression set

Cellular plastics and rubbers - Determination of linear dimensions

Plastics Determination of hardness

Rubber- or plastics-coated fabrics - Determination of roll characteristics

Paints and varnishes - Cross-cut test

Leather; Chemical, physical and mechanical and fastness test-Sampling location

Paints and varnishes - Cross-cut test

Leather; Physical and mechanical tests – Determination of thickness

METHOD

DIN EN ISO

105-B06

DIN EN ISO

105-X05

DIN EN ISO

105-X12

DIN EN ISO 139

DIN EN ISO 178

DIN EN ISO 179

(Teil1- Teil2)

DIN EN ISO 180

DIN EN ISO 306

DIN EN ISO 307

DIN EN ISO 527

(Teil1- Teil3)

DIN EN ISO 845

DIN EN ISO 868

DIN EN ISO

1133-1

DIN EN ISO

1172

DIN EN ISO

1183-1

DIN EN ISO 12947-2

DIN EN ISO 1518-1

DIN EN ISO 1519

DIN EN ISO 1798

DIN EN 1811

DIN EN ISO 1856

DIN EN ISO 1923

DIN EN ISO 2039 (Teil 1-2)

DIN EN ISO 2286

DIN EN ISO 2409

DIN EN ISO 2418

DIN EN ISO 2440

DIN EN ISO 2589

DESCRIPTION

Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension

Flexible cellular polymeric materials – Determinationof stress-strain characteristics in compression

Plastics - Determination of ash

Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 3: Bent strip method

Plastics - Methods of exposure to laboratory light sources

Textiles - Determination of thickness of textiles and textile products

Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader

Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres

Plastics; determination of matter extractable by organic solvents

Plastics; Determination of puncture impact behaviour of rigid plastics; Part 2: Instrumented impact testing

Corrosion tests in artificial atmospheres - Salt spray tests

Textiles - Determination of permeability of fabrics to air

Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation

Plastics - Differential scanning calorimetry (DSC)

Leather - Test for colour fastness - Colour fastness to cycles of to-and-fro rubbing

Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method

Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method

Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (single tear method)

Plastics - Determination of water content

Leather - Chemical determination of formaldehyde content - Part 1: Method using high performance liquid chromatography

METHOD

DIN EN ISO

3376

DIN EN ISO

3386

DIN EN ISO

3451-1

DIN EN ISO

22088-3

DIN EN ISO

4892

DIN EN ISO

5084

DIN EN ISO

5470-1

DIN EN ISO

6270-2

DIN EN ISO

6427

DIN EN ISO

6603-2

DIN EN ISO

9227

DIN EN ISO

9237

DIN EN ISO

11341

DIN EN ISO

11357

DIN EN ISO

11640

DIN EN ISO

12945-2

DIN EN ISO

13934-1

DIN EN ISO

13937-2

DIN EN ISO

15512

DIN EN ISO

17226-1

FORD

DESCRIPTION

Resistance of Textiles to Bleeding, Respiration and Water Spotting

Ford Laboratory Test Method; Water Immersion Test for Painted Parts and Panels

Ford Laboratery Test Method; Painted Adhesion Test

Ford Laboratery Test Method; Hydrolysis Resistance of Painted Plastic Panels

METHOD

FLTM AN 101-01

FLTM BI 104-01

FLTM BI 106-01

FLTM BI 106-03

DESCRIPTION

Resistance of Textiles to Bleeding, Respiration and Water Spotting

Ford Laboratory Test Method; Water Immersion Test for Painted Parts and Panels

Ford Laboratery Test Method; Painted Adhesion Test

Ford Laboratery Test Method; Hydrolysis Resistance of Painted Plastic Panels

Thermal Test Method for Paint Adhesion

Color Difference Evalation Of Textile Materials

Water and Soap Spotting Test for Paint

Resistance to Acid Spotting

Test Method for Resistance to Perspiration, Ford Laboratory test Method; Thickness measurment of paint film

Resistance to Sunscreen Lotion and Insect Repellent

Thickness Measurement of Paint Films

Filiform Corrosion Test

High Performance stone chip resistance test New Rating Scale

Florida and Arisona Outdoor Exposure Test

Ford Laboratory Test Method; Mar Resistance Determination for Automotive Coatings

Fluid Resistance of Chassis and Exterior Materials for Incidental Exposure

Ford Laboratery Test Method; Flammability Test For Automotive Interior Materials

Ford Laboratery Test Method; Flammability for Automotive Interior Materials

Polymeric Materials - Low Temperature Flexibility

Flex Test for Polymeric Coated Fabrics, Genuine Leathers and Woven Fabrics

Flex Ford Test

Resistance of Coated Fabrics and Plastic Film to Migration Staining and Blocking

Shrinkage Test for Textiles and Artificial Leathers

Dimensional Stability of Textile Trim Materials

Determination of Weight per Unit Area and Denisty of Trim Materials

Crocking Test

Thermal Shock Test for Paint Adhesion

Resistance to Abrasion - Taber Abraser

Resistance to Scuffing

Resistance to Scratching

Degree of Soil Transfer to Leather and Polymeric Fabrics

Soiling & Cleanerbility Test for Interior Trim Materials

Test Method for Susceptibility of Trim Materials to Dye Ingress (North America Only)

Evaluation of Trim Materials after Accelerated Exposure in a Controlled Irradiance Water Cooled Xenon Arc Apparatus

Determination of 180 Degree Peel Adhesion Strength of Laminates

Resistance to Simulated Finger Trip Abrasion

Determination of Leather Stiffness

Determination of Fuel Resistance of Plastic Parts

METHOD

FLTM AN 101-01

FLTM BI 104-01

FLTM BI 106-01

FLTM BI 106-03

FLTM BI 107-05

FLTM BI 109-03

FLTM BI 113-01

FLTM BI 113-02

FLTM BI 113-06

FLTM BI 113-08

FLTM BI 117-01

FLTM BI 124-01

FLTM BI 157-06

FLTM BI 160-01

FLTM BI 161-01

FLTM BI 168-01

FLTM BN 024-02

FLTM BN 024-

02EU

FLTM BN 102-01

FLTM BN 102-02

FLTM BN 102-04

FLTM BN 103-01

FLTM BN 105-01

FLTM BN 105-03

FLTM BN 106-01

FLTM BN 107-01

FLTM BN 107-05

FLTM BN 108-02

FLTM BN 108-04

FLTM BN 108-13

FLTM BN 112-03

FLTM BN 112-08

FLTM BN 112-09

FLTM BN 117-03

FLTM BN 151-05

FLTM BN 155-01

FLTM BN 157-02

FLTM BO 101-05

DESCRIPTION

Test for Identation and Recovery

Dynamic Energy Absorption of Polyurethane Foam

Ford Laboratery Test Method; Staining of Trim Material Identification Markings

Load Deflection Test

Rolling Sphere Fatigue Test for Arm Rest and Other Intricate Trim Assembles

Plastics - Resistance to Artificial Weathering

Exposure of Interior Trim Materials in a Controlled Irradiance Water Cooled Xenon-Arc Apparatus

Interior Trim - Fogging Caracteristics

Stress Cracking Test for Plastics

New Odor Test

Resistance to Low Temperature Impact

Plastics and Tapes Resistance To Protective Waxes and Dewaxing Material

Determination of Chemical Stress Crack Resistance of Plastic Parts under Mechanical Stress

Resistance of Painted Plastic Parts to High Pressure Cleaning Operations

Resistance to Scratch and Marr

Rubber - Degradation by Ozone

Staining of Surfaces by Polymers and Elastomers

Environmental Test Cycles

Determination of Organicemission From Non Metallic Components, Parts and Materials in Vehicle Interiors

Determination of organic emissions from non-metallic materials in vehicle interiors by Headspace Gas Chromatography

Performance; Vehicle Interior Environment Quality

Performance, Headlining, Formed Not to Be Used for New Design

Performance, Headlining, Formed

Performance, Interior Trim Appliques, High Wear (C1)Performance, Interior Trim Appliques, Low Wear (C2)

Engineering Material Specification; Throw in Mat Assembles, Carpeted

Performance, Instrument Panel Assembly, Flexible Cover Skin Material

Assembly Performance, Instrument Panel and Soft Interior Components, Flexible Cover Skin Material

Interior Trim; Assembly Performance Specification

Fabric, Styilize, Pattern, Woven Jacquard

Electroplating, Bright or Low Gloss decorative finish over ABS PC/ABS or Filled Nylon - Interior

Paint Performance, Metal Substrates - low /moderate/high visibility

Print Performance, Rigid Substances, Exterior

Paint Performance, Flexible Substrates, Exterior

Paint Performance, Plastic Substrates, Interior

Paint Performance, Visible Interior Parts

METHOD

FLTM BO 111-02

FLTM BO 111-04

FLTM BO 112-06

FLTM BO 113-03

FLTM BO 113-04

FLTM BO 115-01

FLTM BO 116-01

FLTM BO 116-03

FLTM BO 127-03

FLTM BO 131-01

FLTM BO 151-01

FLTM BO 155-01

FLTM BO 158-03

FLTM BO 160-04

FLTM BO 162-01

FLTM BP 101-01

FLTM BP 153-01

FLTM BQ 104-07

FLTM BZ 156-01

FLTM BZ 157-01

WSS 99P2222-

A1

WSS M15P27-D

WSS M15P27-F

WSS M15P34

(C1-C2)

WSS M15P44-A

WSS M15P45-A

WSS M15P45-B

WSS M15P4-E

WSS M1H787-A

WSS M1P83

(A1-D3)

WSS M2P177

(C1-C3)

WSS M2P180-C

WSS M2P181-C

WSS M2P188-

A1

WSS M2P190-A

DESCRIPTION

Coating Performance; Decorative Finish, Bright Metal Parts, Interior

Carpet, Polypropylen, Random Velour Latex Backed Moldable

Thermoplastic Polyolefin Elastomer (TPO), High Melt Flow, 22% Mineral Filled, Mold-In-Colour Only, Molding compound Exterior; Thermoplastic Polyolefin Elastomer (TPO), High Melt Flow, 22% Mineral Filled, fully Painted only, Molding compound, Exterior

ABS Molding Compound, High Heat Resistant High Impact Molding Compound

Polypropylene (PP) Homopolymer, 30% Long Glass Fiber and Mineral Reinforces Molding Compound

ABS+Polyamide Blend (ABS+PA) Molding Compound Interior

Flexible coverstock, slush moldable polyvinyl chloride (PVC) or polyvenyl chloride alloy,seamless instrument panal

Steering Wheel Material Performance Specification

Exterior Plastic Performance, Mold-In-Colour

Standard Requirements for Production Materials

Performance, vehicle Interior Environment Quality

(B1) Performance, vehicle Interior Environment Quality Material/ Component Requirements (B2) Performance, vehicle Interior Environment Quality Allergy Testing and Contact Requirements (B3) Performance, Vehicle Interior Environment Quality HVAC Requirements (B4) Performance, Vehicle Interior Environment Quality Complete Vehicle Requirements

Performance, Vehicle Interior Enviroment Quality Component Requirements (C1); Performance, Vehicle Interior Enviroment Quality Allergy Testing and direct Skin Contact Requirements (C2) Performance, Vehicle Interior Enviroment Quality HVAC Requirements (C3) Performance, Vehicle Interior Enviroment Quality Copmplete Vehicle Requirements (C4)

Performance, Energy Absorbing Foam, Interior

Performance Sprayable Coating, Acoustic, Interior and Exterior, Body Panels

(A) Label Performance, Interior (A2) Laber Performance, Interior/Exterior (A3) Label Performance, Exterior (A4) Label Performance, under Hood

Restricted Substance Management Standard

Elastomeric Parts, Interior Performance

Standard Requirements for Production Materials

METHOD

WSS M2P191-A1

WSS M3H120-A

WSS M4D1005 (A1-A2)

WSS M4D827-A3

WSS M4D865-A4

WSS M4D960-A

WSS M4D985-A3

WSS M98P12-A

WSS M98P13-B

WSS M99P1111-A

WSS M99P2222 (A1-A3)

WSS M99P2222 (B1-B4)

WSS M99P2222 (C1-C4)

WSS M99P29

WSS M99P30

WSS M99P34 (A1-A4)

WSS M99P9999-A1

WSS M9P8-B

WSS MPA99P1111-A

GM

DESCRIPTION

Migration - Bleeding Resistance and Contact Stain Compatibility of PVC with other Materials

Determination of Impact Resistance of Plastic Components

Test MethodMaterials; Test Method for the Determination of Water Spotting

Test Method for the Resistance of Materials to Cracking from Bending at Cold Temperature

General Specification Interior; Door Trim Panel

IP Trim and Floor Console Technical Specification

Plastic Roll Goods, PRG

Test Procedure Materials; Automotive Environmental Cycles

METHOD

GMW 14069

GMW 14093

GMW 14102

GMW 14108

GMW 14109

GMW 14117

GMW 14122

GMW 14124

DESCRIPTION

Linear abrasion test

Test Procedure; Resistance to Cold Crack of Folded Materials

Impact Cold Crack

Test Procedure; Resistance to Marring or Scuffing

Compatibility of Interior Trim Materials with Amines

Resistance to Blocking

Dye Migration

Stitch Tear Out Resistance

Test Method Material; Colorfastness to Artificial Weathering

Material Specification Textiles; Automotive Fabrics

Determination of Aldahyd and Ketone Emissions from Vehicle Interior Materials

Perspiration Resistance

HVAC Air Ducts

Resistance to Fuels of Exteriors Automotive Materials and components

Chemical Resistance to Fluids

Determining of the Moisture Content of Plastic Components and Molding Compounds

Procedures of test for Cellular and related materials determination of resitance to humidity aging

Determination of Indentation Hardness of Foam Components at Constant Force

General specification; Material Related Interior Part Performance

Test Method Materials; Sunscreen and Insect Repellent Resistance

Testing of Staining Behaviour of Molded Headlining through Dust Deposits

Security Shade Fabric

Performance Requirements for Exterior Plastic Parts

General Specification Overall Vehicle; Material Related Interior Plastic Part Performance Monolithic Plastic Parts and Injection Molded Plastic Substrates

Interior Trim Substrate Materials with Natural Content

Anodic Oxidation Coating Alumium

Minimum Perfomance Requirements for Decorative Chromium Plated Plastic Parts

Organic Coating Performance for Underhood and Underbody Components

Minimum Plating Structure and Performance Requirements for Decorative Chromium Plated Metallic Parts

Test Method Materials; Scratch and Mar Resistance

Test Method Materials; Determining the Cohesive Strength of Felts and Similar Materials

Test Method Materials; Scratch Resistance of Organic Coatings and Self-Adhesive Foils

Stone Impact Resistance of Coatings

Resistance of Coating to Chemical Etching and Distortion

Adhesion of Organic Coatings after Storage in Warm Water

Material Specification Plastics; Accelerated Aging Requirement for Polymer Safety Parts

Elastomeric Floor Mats

Test Procedure Materials; Procedures for High Humidity Test

Test Method for Determining the Dimensional Stability of Fiberboards, Cardboard, and Similar Rigid Materials under Humid Conditions

METHOD

GMW 14125

GMW 14126

GMW 14127

GMW 14130

GMW 14131

GMW 14132

GMW 14141

GMW 14146

GMW 14162

GMW 14231

GMW 14236

GMW 14296

GMW 14325

GMW 14333

GMW 14334

GMW 14335

GMW 14357

GMW 14363

GMW 14444

GMW 14445

GMW 14512

GMW 14553

GMW 14650

GMW 14651

GMW 14652

GMW 14665

GMW 14668

GMW 14671

GMW 14672

GMW 14688

GMW 14695

GMW 14698

GMW 14700

GMW 14701

GMW 14704

GMW 14709

GMW 14722

GMW 14729

GMW 14773

DESCRIPTION

Test Method for Determining the Bursting Strength of Cardboard, Fiberboard and Similar Rigid Materials

Test Method for Determining Moisture Content, Water Absorption and Thickness Swell of Fiberboards, Chipboards, Cardboard, and Similar Rigid Materials

Exterior Plastic and Engine Compartment; Painted Parts Performance Requirements

Test Procedure; Tape Adhesion test for Paint Finishes

Non Metallic Fuel Tank Impact Resistance

Procedure of Determining the Staining of Trim materials Due to Sulfur Dioxide, SO2, and Hydrogen Sulfide, H2S

Material Specification Paints; Performance Requirements of Paints on Interior Plastic Substrates

Cyclic Corrosion Laboratory Test

Material Specification Adhesives; Adhesion Requirements for Bonded Interior Parts

Test Fluids for Fuel Resistant Testing

Elastic and Non-Elastic Cords and Straps

Documentation for Control of Appearance Aesthetic Quality; Color and Gloss

Corrosion/Undercutting Scribe Creepback

Scab Corrosion Creepback of Paint Systems on Metal Substrates

Component Rating Scale

Molded Seat Foam Parts

Safety Belt Webbing - Polyester

Polypropylene Copolymer – Mineral Filled, UV Stable

Acrylonitrile Butadiene Styrene and Polycarbonate Blend, Unfilled

Determination of Aldehyde and Ketone Emissions, in Vehicle Interior Cabin Air

Determination of Volatile and Semi-Volatile Organic Compounds from Vehicle Interior Materials

Determination of Aldehyde and Ketone Emissions from Interior Materials

Solvent Rub Method For Determining Cure of Painted Metal Or Plastic Substrates

Blend from Polypropylene and EPR, UV Stable

Material Specification Finish; Quality and Chrome Plater Approval Process

Determination of Colour Fastness to Artificial Light

Test Method Materials; Determination of Tensile and Elongation Properties

Safety Belt Webbing Technical Specification

Carpet Materials for Floors

Material Specification; General; Restricted and Reportable Substances for Parts

Verification of Requirements for Frontal Air Bag Modules

Validation of Cover/Door Subcomponent for Frontal, Side and Roof Rail Airbag Modules

Thermal Cycling Test for Life Assessment for Powertain Sealing Systems

GM Worldwide Engeneering Standards

Determination of Mass per Area

Determining the Resistance to Odor Propagation of Interior Materials

Test Method Material; Rotary Abrasion Test Type

Resistance to Stretch and Set

Laminate Bond Strength

METHOD

GMW 14776

GMW 14777

GMW 14797

GMW 14829

GMW 14847

GMW 14864

GMW 14867

GMW 14872

GMW 14892

GMW 14914

GMW 15015

GMW 15195

GMW 15282

GMW 15288

GMW 15357

GMW 15471

GMW 15478

GMW 15548

GMW 15581

GMW 15600

GMW 15634

GMW 15635

GMW 15891

GMW 15988

GMW 16193

GMW 3007TM

GMW 3010

GMW 3020

GMW 3026

GMW 3059

GMW 3112

GMW 3133

GMW 3155

GMW 3172

GMW 3182

GMW 3205

GMW 3208

GMW 3211

GMW 3220

DESCRIPTION

Procedure for Standard Conditioning of Organic Materials

Test Method for Determining the Flammability of Interior Trim Materials

Fogging Characteristics of Trim Materials

Test Procedure; Mildew Resistance

Test Method Materials; Schopper Abrasion Wear Test

Procedure for Neutral Salt Spray Test

Procedure for Determining Fiber Degradation of Automotive Textiles

Procedure for Determining the Flexibility of Automotive Upholstery Materials

Test Method Materials; Soil and Cleaner Resistance of Automotive Materials

Seam Fatigue for Automobile Textiles

Artificial Weathering of Automotive Interior Trim Materials

Natural Weathering Exposure Tests for Interior Trims/ Materials

General Procedures for Testing Switches

Dimensional Stabilitv

Compatibilty of Upholstery Materials

The Determination of indentation Hardness by Means of a Durometer (Shore A and D)

Test procedure; Determination of resistance to synthetic perspiation solution of automotive trim components

Test Method Materials; Visual Evaluation of Automotive Trim

Static Headspace GC-MS for Interior Materials; Interior Emissions

METHOD

GMW 3221

GMW 3232

GMW 3235

GMW 3259

GMW 3283

GMW 3286

GMW 3387

GMW 3390

GMW 3402

GMW 3405

GMW 3414

GMW 3417

GMW 3431

GMW 4217

GMW 4659

GMW 60259

GMW 60275

GMW 6992

GMW 8081

DESCRIPTION

Conditioning of painted test panels before testing

Peeling Strength - Laminated Materials

Adhesion; Overspilled Flock

Peeling Strength; Laminated Materials

Scratch Resistance, Erichsen Pen - Organic Materials

Discoloration of Organic Finishes; Rubber Material

Light Fastness 60°C

Assessment of Colour in Light Booth

Standard: Volvo Car Corporation

Colour fastness to artifical light at 100°C

Colour Fastness to Rubbing; Rubber, Plastics and Textiles

Accelerated Corrosion Test Accelererad Korrosionsprovning; Atmospheric Corrosion

Colour Fastness to Artificial Light at 75 °C

METHOD

VCS 1021,19

VCS 1024,2843

VCS 1024,28129

VCS 1024,28439

VCS 1024,31139

VCS 1026,8131

VCS 1026,8243

VCS 1026,51729

VCS 1026,52759

VCS 1026,82429

VCS 1026,84329

VCS 1027,149

VCS 1027,359

VOLVO

DESCRIPTION

Heat Ageing

Fogging

Odour of Trim Materials in Vehicles

Determination of Formaldehyde form Components in Vehicle Interiors

Determination of Organic Emission from Non-Metallic Materials in Vehicle Interiors

Quantification of Specific Volatile Organic Substances from Non-Metallic Materials in Vehicle Interiors

Determination of volatile organic substances frominterior components/systems using a 1 m³ emissionchamber

Climate Ageing

Light exposure; Accelerated ageing of exterior material

Climate Ageing

Moisture Resistance in Tropical Cabinet

Adhesion, Cross-Cut Test

Adhesion

Flammability of Interior Materials

METHOD

VCS 1027,2231

VCS 1027,2719

VCS 1027,2729

VCS 1027,2739

VCS 1027,2749

VCS 1027,2759

VCS 1027,2769

VCS 1027,3372

VCS 1027,3379

VCS 1027,33729

VCS 1027,33759

VCS 1029,54729

VCS 1029,54739

VCS 5031, 19

HONDA

DESCRIPTION

Test method for VOC

Flammabiltiy test Method for Automobile inetrior parts

METHOD

0094Z-SNA-0000

HES D 6003-99

TOYOTA

METHOD

TSM 0505G

TSM 0508G

TSM 0503G

TSM 0500G

VDA

METHOD

VDA 278

VDA 270

VDA 277

VDA 75202

VDA 230-209

VDA 275

DESCRIPTION

Thermal Desorption Analysis of Organic Emissionsfor the Characterization of Non-Metallic Materials for Automobiles

Determination of the odour characteristics of trim materials in motor vehicles

Determination of organic emissions from nonmetallicmaterials in vehicle interiors

Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test

Leather, plastic roll stock and textiles for motor vehicle, Determination of the flexural properties

Moulded composites and fleeces for vehicles - Determination of formaldehyde release - Test procedure called modified flask method

DESCRIPTION

Smell quality of non-metallic materials

Volatile component measurement method using sampling bag

Fogging test for non-metallic materials

Flammability test method for interior non metallic materials

HYUNDAIKIA

DESCRIPTION

Molded Plastic Parts - Interior Use

Flammability Resistance - Interior Materials

Test Method of Odor for Interior Parts

METHOD

MS 210-05

MS 300-08

MS 300-34

DESCRIPTION

Testing of the corrosion protection of automotive coatings

Chemical resistance of automotive coatings

Elastomere parts in motor vehicle - DSC

Determination of volatile, organic emissions from parts of trim materials using a 1 m³ testing chamber

METHOD

VDA 621-415

VDA 621-412

VDA 675-116

VDA 276

PORSCHE

METHOD

PN 780

PPV 8041

PPV 8042

PTL 5536

PTL 8501

PPV 4050

PPV 4014

PTL 5538

PTL 8140

PTL 8172

PTL 5522

DESCRIPTION

Determination of the emission behaviour of trim materials in motor vehicles

Emisson test using a testing chamber in accordance to VDA 276-1

Interior emission behaviour - Thermal Desorption Analysis in accordance to VDA 278

Interior surface decore - Coating/pad printing/hot embossing; Requirements and tests

Determination of the burning behaviour acc. to FMVSS 302

Vehicle components; Determination of volatile organic emissions; emission test using SHED chambers

Exterior; Weathering of non-metallic materials in dry-heat climate and moist-hot climate

Interior surface decore - Wood/Carbon/piano lacquer/metallic; Requirements and tests

Interior parts; Requirements and tests

Technical supply specification; Flocked plastic parts in the interior; Requirements and tests

Coating of non-metallic materials for interior usage

JAGUAR

METHOD

TP JLR 51.5224

TP JLR 51.5223

TP JLR 51.5242

TP JLR 51.5262

TP JLR 52.104

TP JLR 52.458

TP JLR 52.107

DESCRIPTION

Instrument Panel Assembly Performance: Incorporating Flexible Cover Skin Material

Temporary Protection Systems for Trim Components

Paint & Lacquer Performance - Interior

Performance Requirements Of Plastics

Determination of VOC and Carbonyl Emission for interior materials

Determination and assessment of odour from interior trim materials, components and assemblies

Determination of VOC's from Interior Components and Systems using a 1 m³ Emission Chamber

PSA RENAULT

METHOD

D45 1333

D45 1727

D47 1122

D45 1601

D47 1431

D45 1010

D 45 1431

DESCRIPTION

Materials Inside Passanger Compartment; Horizontal Flammability

Test Method; Interior Trim Materials and Passanger Compartment Parts; Fogging

Trim Materials; Colour Fastness to Artificial Light at Low Temperature

Passanger Compartment materials Volatility of Additives on a Single Surface

Passenger Compartment Materials and Parts; Colour-fastness in Artificial Light at High Temperature

Polymere Materials and Parts Inside and Outside Passenger Compartments Colourfastness to Rubbing

Materials and passenger compartment partsBehaviour of the appearance to artificial light at high and medium temperatures

SAE

METHOD

SAE J 369

SAE J 365

SAE J 948

SAE J 1960

SAE J 2412

SAE J 2527

DESCRIPTION

Flammability of Polymeric Interior Materials - Horizontal Test Method

Method of Testing to Scuffing of Trim Materials

Test Method for Determining Resistance to Abrasion of Automotive Bodycloth Vinyl and Leather and the Snagging of Automotive Bodycloth

Accelerated Exposure of Automotive Lonterior Trim Components Using a Controlled Irradiance Water Cooled Xenon -Arc Apparatures

Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus

Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus

WWW.SGS.COM

© S

GS

Gro

up M

anag

em

ent

SA

– 2

012 –

All

rights

rese

rved - S

GS

is a

regis

tere

d t

radem

ark

of

SG

S G

roup M

anag

em

ent

SA