capping beam
2
1. Hacking plat form and guide wall 2. Carry out debris 3. Escavate soil until -3,80 and -1,10 use excavator 4. Soil protection (especially at Pesona Square Project) 5. Marking the cut of level capping beam bottom level 6. Hacking D-Wall and Trimming 7. Putting waterstop at the center of capping beam 8. Installation rebar and starter bar 9. Installation formwork 10.And then casting concrete
description
capping beam
Transcript of capping beam
1. Hacking plat form and guide wall
2. Carry out debris
3. Escavate soil until -3,80 and -1,10 use excavator
4. Soil protection (especially at Pesona Square Project)
5. Marking the cut of level capping beam bottom level
6. Hacking D-Wall and Trimming
7. Putting waterstop at the center of capping beam
8. Installation rebar and starter bar
9. Installation formwork
10. And then casting concrete
