0711847

Capital Drilling Equipment Risers, Diverters and Connectors

I N T E G R I T Y

O P P O R T U N I T Y

vet cog ray

Capital Drilling Equipment

\

(S^vetcogray

THE. IN-* OFFS^

WJS . „ A D E R FOR RELIABLE RILLING EQUIPMENT

Introduction Vetco Gray has been a leader in supplying drilling equipment to the oil and gas industry since 1906, when Regan Forge began manufacturing crown blocks and traveling blocks for the California exploration market.

Today, we are the world's leading supplier of marine drilling riser systems with more than 65% of the global market. Our legacy of technology development and innovative solutions puts us in the forefront of offshore drilling, especially for deepwater exploration.

Vetco Gray supplied the complete drilling riser system for the world's first, and to date, only, exploration well in water depths greater than 10,000.

We provide a complete line of Capital Drilling Equipment for fixed platform, jackup and floating rig applications.

Table of Contents

Diverters for Jackup & Platform Drilling Units

KFDJ 3 KFDJ Model J 4

Diverters for Floating Drilling Units KFDS 5 CSO: Complete Shut-Off 5

Drilling Riser System Components Telescopic Joints 6

Tensioner Support Rings KT 7 SDL and SDL with Fluid Bearing . . 8

Marine Riser Couplings MR-6HSE 9-10 MR-6H SE Riser Adaper 10 MR-6E 11 HMF Class E, F, G, H, J 12

Ancillary Riser Equipment Spiders 13 Intermediate Flex Joint 14 Single Flex Joint 14

Subsea Connectors H-4 Connectors: Wellhead & LMRP

ExFH-4 15 EH-4 15 ExFHAR 15 DWHDH-4 15 SHDH-4 16

VX-2, VGX-2 and VT-2 Gaskets

17-18

Composite Material Risers 19

Aftermarket Support Riser Inspection (RADAR) 20

Facilities Locations 21-22

<S5Vetcogray

Diverters for Jackup & Platform Drilling Units KFDJ Diverter Systems

Features

KFDJ Diverter

Complete protection while running casing strings and drilling hole is provided by a full range of insert packer sizes, all of which use a "J" type running tool.

Available with a rotating insert which provides low pressure packoff on the kelly or drill pipe during drilling.

The fixed support housing, a proprietary feature, is securely bolted to the rotary beams and provides fixed outlets for flowline, fill-up line and vent lines. The support housing allows installation of outlets up to 20" diameter to virtually any configuration.

Diverter, spacer spool and overshot packer assembly may be pulled or run without connecting or disconnecting the flowline, fill-up line and vent lines.

Mudline suspension hangers and bit sizes up to 27.41" for 37-1/2" rotaries or 36.41" for 49-1/2" rotaries can be run without removing the diverter assembly. Diverter, spacer spool and overshot packer each fit through a 37-1/2" rotary table. Minimum bore through the standard support housing is 36-1/2" ID for the 37-1/2" in rotary installation. Optional 37-1/2" bore is available.

The overshot packer on the bottom of the diverter spacer spool assembly reduces the nipple-up time normally required to weld flanges or hubs to casing.

Dimensional Data - Standard Hookup KFDJ with 12" Nominal Outlets*

Rotary Table А в С D E F

37.50

49.50

42.50

53.00

37.25

49.25

37.25

49.25

37.25

49.25

37.25

49.25

37.25

49.25

37.25

49.25

All dimensions in inches. * Number and size of outlets are optional.

\

<25Vetcogray

Diverters for Jackup & Platform Drilling Units KFDJ Model "J" Diverter Systems

KFDJ Model "J" Designed with all the field proven features of the standard KFDJ diverter, but with fewer hydraulic connections, Vetco Gray's KFDJ Model "J" diverter system has a "J" lock between the diverter and the support housing. The Model "J" requires only 3 hydraulic functions: energizing/venting the diverter packer, the flowline seals and the overshot packer. The "J" slots in the support housing align the diverter outlets with the housing outlets. A mechanical latch secures the diverter in the housing and the handle position provides a clear visual indication of lock engagement.

Features Simplified design

All components of the support housing and the diverter assembly area heavy wall construction for pressure containment and erosion protection during high velocity, multi-phase flow

Full size range of insert packers

Custom designed for specific applications

KFDJ Model "J" Diverter

KFDJ "J" Diverter (Handling Tool)

Standard handling tool has a 4-1/2" IF API tool joint box up and pin down, but can accommodate other tool joints as desired. The optional test tool provides the means to pressure test the entire diverter system.

Dimensional Data -Standard Hookup KDFJ " J " with 12" Nominal Outlets*

Rotary Table

37.50

49.50

49.50

A

78.50

73.25

96.50

В

36.50

47.00

47.00

С

27.50

27.50

36.50

D

36.25

46.75

46.75

E

35.25

35.25

35.25

-15.62

10.40

29.40

All dimensions in inches. * Number and size of outlets are optional.

<S5Vetcogray

Diverters for Floating Drilling Units KFDS Diverter Vetco Gray is the market leader for diverter systems in the offshore drilling market. For 25 years, Vetco Gray has provided KFDS Diverter technology with field-proven protection from shallow gas blowouts.

Compact: the Diverter Support Housing, overboard lines and associated valving are permanently installed on to the Rig structure. The Diverter Assembly is run and retrieved through the rotary table with the marine riser.

Flexible: Variable outlet sizes and orientations can accommodate most any rig design. Valving is external, allowing for rig design variation and valve/actuator preferences.

Rf 1 Г

Diverter Insert Diverter Housing

Vetco Gray is a single-source supplier for a complete system, including diverter assembly, controls and valves. An integrated package, engineered to specific requirements, will provide maximum safety, efficiency and savings.

CSO Diverter

^^k Diverter Assembly

pherical Element

Diverter Housing

Flow Lino

Running pressum

„ ' Energized Proflle FlowLine

Seals

Standard housing has multiple outlets, up to 20" diameter.

Minimum Dimensions

(S^vetcogray

Features

Outl.tNom.(»n.)

12

14

16

18

20

11.38

12.50

14.31

16.50

18.38

16.38

17.00

18.00

19.00

20.00

15.38

16.00

17.00

18.00

19.00

43.75

45.00

47.00

49.00

51.00

71.50

72.75

74.75

76.75

78.75

Housing accommodates large diameter riser buoyancy modules

Complete open-hole shutoff with 20" through-bore

10-15 second closure time on pipe or open hole

500 psi rated system

Control system maximum operating pressure of 1,500 psi

High capacity systems available for supporting the Riser String from Diverter Housing in emergency hangoff situations

Connection block enables hydraulic operating functions to be quickly attached or disconnected

Standard housing holds multiple outlets, up to 20" diameter

Spherical Element

Standard housing has multiple outlets, up to 20" diameter

Flex Joint Crossover Flange Running Tool Profile

Drilling Riser System Components Telescopic Joint

Vetco Gray telescopic joints compensate for heave and offset of the vessel and are available for all riser systems.

• Available for MR-6E, MR-6H SE, and HMF riser systems ^ И С Г

• Maximum rated riser tensile load capacity in locked position ^ & Hydraulic latch release for inner and outer barrels available Dual split/solid packer elements

• Fixed or rotating integral tensioner rings

• Prepped for non-integral SDL, SDC and KT tensioning rings

• Fluid or roller bearing prep

(S^vetcogray

Drilling Riser System Components KT Tensioner Support Ring

Radial Bearings Carbon/Teflon Thrust Bearing

Auxiliary Line Pin (shown in the extended position)

Auxiliary Line Termination

Stop Blocks Prevent Overpressurlng of Optional Fluid Bearing

Features & Benefits Forms a termination point between the riser tensioner and the marine riser system

Simplifies running and retrieving marine riser by eliminating makeup/breakout of tensioner lines and hydraulic hoses in the moon pool area

Choke, kill, and auxiliary line terminations permanently connected

Orientation pins on the ring engage slots in telescopic joint line termination housing for easy makeup

Permanently installed tensioner lines maintain proper orientation with rig drilling tensioners

Riser tensioner lines remain attached to the KT ring

Thrust and radial bearings permit rotation of the vessel relative to riser string

Optional Fluid Bearing System minimizes breakout torque at high tension loads

Auxiliary line pins have differential seal areas to ensure fail-safe engagement

IB^L

BHKj ^ M

HLflD

ww к i

t й

<25vetcogray

Dual Seals Ensure High Integrity

Carbon/Teflon Backup Bearing

Fluid Bearing Port

Seal Monitoring Circuit

Optional Fluid Bearing Detail

Drilling Riser System Components

SDL/SLS Tensioner Support Ring

Features & Benefits

Riser tensioner lines remain attached to the SDL/SLS Ring so riser tensioning lines remain properly spaced out at all times

Hydraulically disconnects from the Telescopic Joint and locks to a mating profile on the bottom of the Diverter Support Housing for convenient out-of-the-way storage

The SDL/SLS Ring is full opening to the Diverter Support Housing

The SDL/SLS Ring may be used with a Telescopic Joint Fluid Bearing, allowing the drilling vessel and tensioners to rotate relative to the riser string

Telescopic Joint is run and pulled through the rotary table without disconnecting the tensioning lines from riser tension ring

Hydraulic piping for lockdown/storage dogs remains permanently connected

Diverter Stow Dogs {shown out or phase)

Tensioner Ring Pad Eyes

Hydraulically Actuated Riser Support Dogs

SDL Tensioner Support Ring

SDL Tensioner Support Ring with Optional Fluid or Roller Bearing

Features & Benefits

Incorporates field-proven SDL/SLS Ring technology

Low breakout torque values with high tension loads

Fluid bearing has a carbon/teflon backup bearing

Pressures in the fluid bearing can be observed and controlled via a hydraulic monitoring and replenishment circuit

Fluid Bearing Assembly

Fluid Monitor Line Fluid Fill / Return Line

Stop Ring to prevent overpressuring Telescopic Joint Outer Barrel

(S^vetcogray

Drilling Riser System Components

MR-6H SE Riser Coupling

Vetco's Next Generation Marine Riser System, the MR-6H SE Riser Coupling

This fully-automated make-up, 3.5 million pound rated

(API Class 'H') MR-6H SE marine riser coupling is the

latest offering from industry leader Vetco Gray. The design

is simple, with very few parts, utilizing field proven

concepts and profiles which have provided many years of

exemplary service. The highly preloaded coupling with

efficient load path also provides the option for

incorporation of a metal seal if required for higher-pressure

conditions. The modularized, hydraulically operated

handling spider provides all mechanisms required for

make-up and break-out of the coupling which minimizes

intervention of rig floor personnel. The spider design allows

quick change out of key subassemblies if required during

riser running operations.

MR-6H SE exploded view

MR-6H SE assembled

Features & Benefits

• Automated make-up with minimal personnel intervention

• Utilizes reliable, field proven concepts and profiles (H-4 & MR)

• High preload / efficient load path

• Parts subject to wear are easily replaceable

• Easy maintenance, service and inspection with all

critical areas readily accessible

• External surfaces of pin and box

can be fully "TSA protected"

• Handling spider modularized to allow quick change out of critical parts or subassemblies, if required.

<S^vetcogray MR-6H SE profile

Drilling Riser System Components

MR-6H SE Riser Adapter

All the Benefits of the MR-6H SE... Also Available in a Riser Adapter:

Features & Benefits

Safety: Eliminates the potential hazards of Riser Adapter make up and break out.

Eliminates the need to lower heavy tools, bolts and equipment to personnel.

Reduces need for multiple rig personnel to make this connection.

Existing rig designs have limited clearance to make up the Riser Adapter. With the MR-6H SE Riser Adapter, this clearance restriction is no longer an issue.

Efficiency: Significantly reduces the time to make/break the connection.

Utilizes field proven technology (H-4 Connector & Dog Style Riser).

views of MR-6H SE Riser Adapter

<S$ vet cog ray

Drilling Riser System Components

MR-6E Riser Coupling

Vetco Gray's MR-6E Riser Couplings feature an improved design providing significantly increased resistance to high tensile loads and large bending moments, conditions common with today's deepwater drilling operations. The MR-6E is lightweight, simple to operate and fast to run.

Features & Benefits • 2,000,000 lb. rating per API 16R Class E

• Low makeup torque, 950 ft.-lbs.

• Simple, light weight design • MR-6E couplings can be used interchangeably with

MR-6D couplings

MR-6E Box "O" Ring Primary Seal

Actuating Screw

O" Ring Trash Seal

MR-6E Pin

MR-6E Riser Coupling Specifications 5" С & К, 4-1/2" Boost, & 2-7/8" Hydraulic Stab Subs

O.D. ID. (2) Length Weight (1) No. of Activating Screws Torque

41.125" 19.75" 23.125" 2,510 lbs. 6 950 ft.-lbs.

Notes: (1) - Includes weight of auxiliary line stab subs (2) - I.D. based on 0.625" wall thickness of principal tube

V <S5Vetcogray

Drilling Riser System Components

HMF Riser Coupling

One of the most reliable and advanced marine riser systems in today's market is Vetco Gray's HMF™ system. Developed through extensive design analysis and test programs of bending, tension, internal pressure and functional evaluations, this coupling is ideal for deep water applications where high load operating conditions exist. The HMF riser coupling has been field proven through many years of worldwide use, including drilling the current water depth well record of 10,011 feet in the Gulf of Mexico.

View of Class F, HMF Riser Flange Pin

HMF Standard Riser Coupling Specifications

O.D.

I.D.

Length

Weight (1)

No. of Bolts

Bolt Dia.

Class E 2,000,000 lb. Coupling

5" C&K, 4-1/2" Boost 2-7/8" Hyd. Stab Subs

37.25"

19.75" (3)

41.69"

2,711 lbs. (1)

6

3"

6-1/2" C&K, 4-1/2" Boost 3-1/2" Hyd. Stab Subs

41"

19.75" (3)

41.69"

3,221 lbs. (1) 6 3"

Class F 2,500,000 lb Coupling

6-1/2" C&K, 4-1/2" Boost 3-1/2" Hyd. Stab Subs

41"

19.375" (4)

41.69"

3,227 lbs. (1)

6

3.25"

Class G 3,000,000 lb. Coupling

6-1/2" C&K, 4-1/2" Boost 3-1/2" Hyd. Stab Subs

42"

19.375" (5) 42.69"

3,270 lbs. (2)

6 3.50"

Class H 3,500,000 lb. Coupling

6-1/2" C&K, 4-1/2" Boost 3-1/2" Hyd. Stab Subs

43"

19.375" (5)

43.875"

3,710 lbs. (2)

6

3.75"

Class J 4,000,000 lb. Coupling

6-1/2" C&K, 4-1/2" Boost 3-1/2" Hyd. Stab Subs

43"

19.25" (5)

34.875"

3,710 lbs. (2)

8

3.50"

Notes: (1) - Includes weights of auxiliary line stab subs (2) - Includes weight of HMF pin/box flanges, nose ring, bolts and Inserts (3) - I.D. based on 0.625" wall thickness of principal tube (4) - I.D. based on 0.812" wall thickness of principal tube (5) - I.D. based on 1.0" wall thickness of principal tube

Elliptically shaped flanges minimizes weight

Profile for hydraulic running tool

Two-diameter pin and box design enables quick,

accurate stabbing in roughest seas

Features & Benefits

Meets API 16R, class D, E, F, G, H and J

Stepped diameter design of pin and box simplifies engagement, even with severe vessel movement

Ideal for deep water applications where high load operating conditions exist

No loose parts, all bolts and inserts stay in the pin/box flanges preventing

bolt loss and potential thread damage

Field removable and replaceable nose ring

Locking bolts preloaded above the rated coupling loads, which extends the fatigue life of the riser coupling

Hydraulic running/test tool facilitates quicker riser running times

Class F HMF Flange Riser

<S*vetcogray

Ancillary riser Equipment

Hydraulic Spider

MR-6E Hydraulic Spider

The marine riser handling spider supports the marine

riser string while the next joint is removed or installed.

Apositive locking device prevents accidental release.

MR-6H SE Spider

The MR-6H SE riser handling spider supports the

riser string on hydraulic sliding dogs. Six hydraulic

units move the cam ring up and down to make or

break the connector.

MR-6H SE Coupling with Spider

HMF Spider

The HMF hydraulic-gate riser handling spider is used

when running or retrieving HMF riser joints through

the rotary table. Split gates, operated by hydraulic

cylinders, support the riser string when the gates are

in the closed and locked position.

(S^vetcogray

Drilling Riser System Components

Intermediate Flex Joint

Intermediate Flex Joint shown uses a KT ring and no termination joint

Features & Benefits Installed below the telescopic joint

Up to 2.5 million lb tensile load capacity

Angular deflection to 20 degrees on either side of its axial center while subjected to tensile loading and internal pressure of 1,500 psi

Single Flex Joint

Features & Benefits

• Installed in the LMRP below the riser/BOP Stack Interface

• Uses a combination elastomeric bearing and seal unit to eliminate the need for a pressure balanced ball and socket interface with seals

• Up to 2 million lb tensile load capacity

• Rated for H2S service and oil-based drilling mud

• Angular deflection to 10 degrees on either side of its axial center while subjected to tensile loading and internal pressures up to 3,000 psi

• Pressure balance and lubrication systems not required

i

Intermediate Flex Joint

Single Flex Joint

<25vetcogray

Subsea Connectors

H-4® Hydraulic Subsea Connector Family

ExFHAR H-4 Connector DWHD H-4 Connector

Bending Load Capacity

3.1 MM ft.-lbs.

Bending Load Capacity

2.0 MM ft.-lbs.

The ExF HAR (High Angle Release) H-4 Connector is designed for dis­connecting with large vessel offsets.

Bending Load Capacity 3.1 MM ft.-lbs.

Bending Load Capacity

2.5 MM ft.-lbs.

The H-4 family of subsea connectors, introduced in 1964, are in use in every major producing region of the world and in every type of offshore environment. The Vetco Gray Family of H-4 Connectors are field proven, hydraulically operated, metal-to-metal sealing connectors and are widely used for:

• BOP stack to wellhead • Production riser assembly to subsea manifold

• LMRP to BOP stack • Single point mooring to anchor base

• Completion tree to wellhead • Caisson completions and artificial island drilling

• TLP/subsea template tieback • Specially adapted applications

Ideal for deepwater use, the H-4 line of connectors has reliable, simple operating characteristics; excellent bending and tensile load capabilities; and a long, economical service life.

Features & Benefits of the H-4 Family of Connectors

Field Proven Reliability In service since 1964.

High Strength Connection 355 degrees circumferential dog ring contact to the four locking grooves of the wellhead/mandrel profile distributes bending and tensile loads uniformly. Primary and Secondary Hydraulic Circuits The dual hydraulic operating system generates 25% more releasing force than locking force.

Passive Mechanical Release Dog profile design (45 degrees) assures passive retraction of locking dog segments with overpull.

Visual Position Indicator Rod Indicator rod provides positive, visual indication of locked and unlocked position as well as cam ring travel.

Rig Serviceable Hydraulic Systems VX/VT Back-up Seal Profile All current H-4 connector designs have the VX/VT seal profile, and are Inconel inlay for corrosion and damage protection.

<S5Vetcogray

Easy Primary Seal Replacement Primary VX/VT seal is ROV replaceable and retrievable. Hydrate Protection Hydrate seals between the connector and the High Pressure wellhead housing are standard Flush Ports In the event that hydrates form in the H-4 Connector, hydrate flushing ports located in the upper body will facilitate their removal. Seal Ring Protection Connector to wellhead/mandrel interface is self-aligning, which assures that the gasket will not be damaged during makeup. Safety Replacement of seal ring does not require personnel to be under connector/BOP Pressure-tight Self-energizing Seal Positive compression loading of the seal ring into the corrosion and damage resistant seal surface profile provides reliable sealing integrity. Optional Upper Body Configurations Available

Individual Hydraulic Pistons Provide Multiple Circuits

Subsea Connectors

SHD H-4® Hydraulic Subsea Connector

The Super Heavy Duty SHD H-4 connector is the latest member of the H-4 family. Designed for use with the MS-700 and SMS-700 wellheads, this connector, with its exceptional bending load capacities and fatigue life characteristics, is ideal for deepwater, critical service where high bending loads are anticipated.

Bending Load Capacity 7.0 MM ft.-lbs. д ^

Flush Ports

SHD H-4 Connector Specifications Maximum Service Pressure 15,000 psi

Number of Hydraulic Cylinders Total 10 Number of Hydraulic Cylinders Primary 5 Number of Hydraulic Cylinders Secondary 5 Cylinder Lock Area 626.35 sq in Cylinder Unlock Area 785.4 sq in Lock Fluid Volume Total 12.10 US Gal Unlock Fluid Volume Total 15.10 US Gal Maximum Hydraulic Operational Pressure 3,000 psi Maximum Hydraulic Testing Pressure 5,000 psi

Connector Wellhead Preload

1,500 psi Lock 3.75 x 106 lb 3,000 psi Lock 7.50 x 106 lb Maximum OD 66 in Weight based on studded top 28,600 lbs Swallow 32.25 in

18-3/4 SHD H-4 Load Capacity Envelope Load Capacity at 2/3 Yield

Ten

Cap

Note: Tension \ 3,000 psi conn

ton-1,50

tcltyEnve

Oklpe —

top*

alues at actor loc

Tensk

the wellhead for <ing pressure.

ч m - Q kips

:x *ч

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 Bending Moment (MM ft-lbs)

<S5Vetcogray

Subsea Connectors

VX-2, VGX-2, and VT-2 Gaskets

2 Seal Bands

2 Seal Bands

Radius 0.25"

VX-2 VT-2 VGX-2

VX-2, VGX-2, and VT-2 Gaskets are Designed to Seal Internal Pressure in H-4® Connectors

The stainless steel VX-2 gasket is the standard gasket for drilling and production; it is rated for 15,000 psi internal pressure, 250 degrees F, and is manufactured from corrosion resistant material.

The carbon steel VX-2 gasket is a lower cost/lower performance version. It is rated for 10,000 psi internal pressure, 250 degrees F, and is coated for corrosion resistance.

The VGX-2 gasket is a higher performance/higher cost version. It is rated for 15,000 psi internal pressure, 350 degrees F, and is manufactured from high yield strength stainless steel with a silver coating. The higher yield strength material provides a larger range of elastic action, while the

silver coating provides resistance to galling. The coefficient of thermal expansion of the gasket approximates that of the wellhead and the H-4 upper body.

The VT-2 gasket seals on a secondary independent seal surface and is used when the primary VX sealing surface is damaged. It is rated for 15,000 psi internal pressure, 250 degrees F, and is manufactured from corrosion resistant material.

Other API sizes and optional configurations are available. Insert options include Hycar, lead, and tin indium materials.

\

cS^vetcogray

Subsea Connectors

VX-2, VGX-2, and VT-2 Gaskets

VX Gasket MS-700 wellhead with VX gasket prior

to makeup with H-4 connector

Working Pressure (psl)

Temperature Range (°F)

External Pressure Rating (psi)

Seal Material

Surface Coating

PSL-4 Qualifications

VX-2 Gasket (Gas / Liquid)

15,000

35 - 250

1000

Stainless Steel (316)

Moly Based

Yes

VX-2 Gasket (Gas / Liquid)

10,000

35 - 250

2500

Mild Steel

Moly Based

Yes

VT-2 Gasket (Gas / Liquid)

15,000

35 - 250

1000

Stainless Steel (316)

Moly Based

Yes

VGX-2 Gasket (Gas/Liquid)

15,000

35 - 350

3500

Stainless Steel / Corrosion Resistant Alloy

Moly Based

Yes

MS-700 wellhead and H-4 connector in test fixture

<S5Vetcogray

Drilling Riser System Components

Composite Material Riser

Lightweight Advanced Composite Drilling Riser Technology

Originally developed for the aerospace industry, advanced composite materials are more fatigue-tolerant, corrosion-resistant, lower in weight, and have much higher stiffness-to-weight and strength-to-weight ratios than conventional steel risers.

Candidates for advanced composite technology are: • Drilling Riser main body tubes

• Choke and kill lines

• Auxiliary lines

• TLP tendons

Composite Drilling Riser Main Body Tube

Fabrication of Composite Drilling Riser Pup Joint

Features & Benefits

All carbon fiber riser body with Geometric Trap™ metallic end connection

System subjected to cyclic tension and bending loads with no effect to the composite body of end-fittings

Geometric Trap™ technology offers a pre-loaded design and allows for complete operational compatibility with existing drilling riser systems

Nearly double the water depth capacity for a given rig

Reduced overall system costs by reducing the amount of required floatation, tension, and deck load capacity

Increased fatigue resistance

3-D Model of 21" Composite Drilling Riser

\

(S^vetcogray

Aftermarket Support

RADAR - Riser Active Data Acquisition Recorder

RADAR was developed to address the need for an efficient, safe and cost-effective method of internal inspection of drilling and production risers, choke and kill lines, and other metal pipes.

The system uses real-time data acquisition and analysis to enable drilling contractors to monitor life-cycle wear measurements of drilling riser components; help minimize risk by identifying marginal equipment; and plan for regular repairs, maintenance and part replacement to avoid costly rig shutdowns. The inspection data of specific risers can be stored digitally for easy retrieval and used to track riser assets by serial number and facilitate their transfer between rigs and regions. RADAR tools and procedures have been witnessed and certified by DNV.

RADAR is a tool for data acquisition and analysis that performs extensive data processing to:

• identify defects based on specific rejection criteria • determine location, orientation, type and size of

reportable flaws • present the data in a meaningful display • video record the internal portion of the pipe

Weld Quality Inspection • (2) Time-of-flight-diffraction (TOFD) channels for

inspection of the entire weld volume along the length of the weld, and

• (4) Pulse-Echo shear wave transducers in a 4-

I channel setup to analyze the root and cap regions

of the weld

Pipe Thickness Inspection • (4) Pulse-Echo longitudinal wave transducers in a

4-channel setup spaced at 90 degrees apart for increased data acquisition speeds

The analysis programs complement the data acquisition system and operate on the same computer platform. The processed data are displayed in two presentations.

• Color Thickness Map • Segments of the ultrasonic data are

displayed in various colors as a function of the depth and position along the length and circumference of the riser.

• B-Scan Display . Enables the operator to use critical Rf

waveform data and the B-Scan images created from these waveforms to accurately identify and assess flaws.

Reporting criteria can be customized to each particular application, following industry standards, or alternative criteria based on fit-for-purpose analysis.

An internal inspection with RADAR has the primary advantage that it eliminates all special handling, stripping or external preparation of the pipe. The inspection itself is performed in a third of the time needed with conventional methods.

The RADAR unit and associated equipment is portable and the inspections can be performed almost anywhere, including pipe yards, remote dockside facilities, customers' facilities, and offshore rigs, resulting in significant savings in both time and money.

RADAR Tool for Drilling Riser Inspection

Inspections can be performed almost anywhere, even on a drillship in transit.

<S5vetcogray

video Record m Video record of internal condition of riser body tube

For more information, please contact your local Vetco Gray Representative.

ANGOLA Luanda (A ftermarket/Sales/Service) Vetco Gray UK Ltd c/o Sonils Oilfield Service Centre Rua Kima Kienda, Boa Vista Luanda Reptiblica de Angola Tel: 244 222 311 668 Fax: 244 222 311 932 Sat Tel: . . . . 441224852600 Sat Fax:. . . . 44 1224 852610

ARGENTINA Buenos Aires (Administration/Manufacturing/ Salos/Service) Vetco Gray Argentina S.A. DANCO Products Pte Ortiz 2545 Parque Industrial Burzaco (B18!i20TA) Buenos Aires Argentina Tel: 54 11 4299 0052 Fax: 54 11 4299 1014

AUSTRALIA Malaga (Administration/Sales/ Service/Repair) Vetco Gray Australia {Pty) Ltd. 19 Irvine Drive Malaga 6090, Western Australia Tel: 618 9 248 6801 Fax: 618 9 248 6805

AZERBAIJAN Baku (Sales/Service/Repair) Vetco Gray UK Ltd. 31-33A. Zeynall Street Sahibtac Building, 3rd Floor AZ-100 Baku, Azerbaijan Tel: 994 12 498 3028 Fax: 994 12 498 2903

BOLIVIA Santa Cruz de La Sierra (Sales/Service) Vetco Gray CuartoAnilloy Radial 27 Zona Norte Santa Cruz de La Sierra Bolivia Tel: 5913 344 1733

BRAZIL Seo Paulo (Administration/Manufacturing/ Sales) Vetco Gray Oleo e Gas LTDA. dosAutonomistas, 1496 06020-902 Osasco Sao Paulo, Brazil Tel: 55 11 3688 9524 Fax: 55 11 3688 9508

Rio de Janeiro (Sales) Vetco Gray Oleo & Gas Ltda Avenida Rio Branco 1 19th Andar - Sala 1905 20090-003 • Praca Маий Rio De Janeiro, RJ, Brasil Brazil Tel: 55 21 2379 2400

Масаё (Service) Vetco Gray Oleo e Gas LTDA. Estrada de Fazenda Sao Jose do Muturn 200 27 970-030 Imboassica Масаё, RJ, Brasil Tel: 55 24 2763 3500 Fax: 55 24 2763 3547

CANADA Brooks (Sales/Service) Vetco Gray Canada Inc. 515 -1 Avenue East P.O. Box 1929 Brooks, Alberta Canada T1R 1C6 Tel: 403 362 6655

800 925 6025 Fax: 403 362 8158

Calgary (Administration/Sales) Vetco Gray Canada Inc. 2000. 520-5th Avenue S.W. Calgary, Alberta Canada T2P3R7 Tel: 403 264 4146

800 925 6024 Fax: 403 269 4224

Edmonton (Manufacturing/Service) Vetco Gray Canada Inc. 3575 - 97th Street Edmonton, Alberta Canada T6E 5S7 Tel: 780 450 1031

800 925 6026 Fax: 780 435 8272

Fort St. John (Sales/Service) Vetco Gray Canada Inc. 10807-89 Avenue Fort St. John, B.C. Canada V1J5F8 Tel: 250 785 6740

1 800 925 6028 Fax: 250 785 6750

Grande Prairie (Sales/Service) Vetco Gray Canada Inc. 10901 -96 Avenue Grande Prairie. Alberta Canada T8V 3J4 Tel: 780 539 1470

800 925 6027 Fax: 780 539 1664

Nlsku (Sales) Offshore Systems Canada Inc. 607 22nd Avenue Nisku, Alberta Canada T9E 7X7 Tel: 780 955 2400 Fax: 780 955 3470

St. John's, Newfoundland (Sales/Service) Vetco Gray Canada Inc. 27 Dundee Ave. Mount Pearl, Newfoundland Canada A1X7C9 Tel: 709 747 0240 Fax: 709 747 0257

CONGO Polnte Noire (Service/Repair) West African Completion Services Ltd Enceinte GNCAC - Ville 49 Boulevard De Loango BP 4862, Pointe Noire Republique du Congo Tel: 242 944774 Fax: 242 945127

DENMARK Esbjerg (Manufacturlng/Sales/Service/ Repalr/Aftermarket) Vetco Gray Denmark Maadevej 37, P.O. Box 373 6700 Esbjerg. Denmark Tel: 45 76 1010 00 Fax: 45 76 10 10 10

ECUADOR Quito (Sales/Service) Vetco Gray Avenida Amazonas 3517 у Juan Pablo Sanz Edificio Xerox, Piso #9 Quito, Ecuador Tel: 593 2 251319 Fax: 593 22 460062 Fax: 593 22 435807

EGYPT Cairo (Sales) Vetco Gray Egypt 19 Rd. Sherifa Dina Street Sarayat El Maadi, Cairo, Egypt Tel: 202 7514688 Fax: 202 359 9263 Mobile: 20Ю509 6030

EQUATORIAL GUINEA Malabo (Sales/Service) Vetco Gray UK Ltd K-5 Penninsula Carretera Aeropuerto Malabo, Equatorial Guinea Tel: 240 093750 Staff Tel: 240 091988 Mobile: 240 274476

FRANCE Pau (Sales) Vetco Gray France SARL 40, Rue de Liege, Centre Verdun 64000 Pau, France Tel: 33 559 72 99 94 Fax: 33 559 72 99 63 Mobile: . . . . 33 6 14 23 62 90

INDONESIA Jakarta (Sales/Service) P.T. Vetco Gray Indonesia Wisma Nugra Santana, 12th FL Jalan Jend. Sudirman Kav. 7-8 Jakarta 10220, Indonesia Tel: 62 21 571 1740 Fax: 62 21 571 1741 Mob: 62 811 179 223

Pulau Batam (Manufacturing/Service) P.T. Vetco Gray Indonesia Jalan Kerapu No. 14 & 15 Industrial Sec. Batu Ampar Pulau Batam 29432, Indonesia Tel: 62 778 411955 Fax: 62 778 411883

Щ

ITALY Milan (Sales) Vetco Gray Italia S.R.L. Via Bronzino, 14 1-20133 Milano, Italy Tel: 39 02 74281 987 Fax: 39 02 29403 566 Mobile: . . . . 393558192667

MALAYSIA Kemaman (Sales/Service) Vetco Gray c/o Delcom Sercives Sdn. Bhd. P.O. Box No. 22 Warehouse No. 16. Door 8 Kemaman Supply Base 24007 Kemaman Terengganu, Malaysia Tel: 60 9 863 1769 Fax: 60 9 863 1771

Kuala Lumpur (Administration/Sales) Delcom Services Sdn. Bhd. No. 42, Jalan Bangsar Utama 1 Bangsar 59000 Kuala Lumpur, Malaysia Tel: 60 3 2282 7733 Fax: 60 3 2282 6330

MEXICO Mexico City (Administration/Manufacturing/ Sales/Service) Vetco Gray de Mexico, S.A de C.V. Av. Industries #10 Colonia Cerro Gordo Ecatepeq de Morelos Estado de Mexico Codigo Postal 55500 Tel: 52 55 5775 15 13 Fax: 52 55 5775 13 88

Vlllahermosa (Administration/Manufacturing/ Sales/Service) Vetco Gray do Mexico, S.A de C.V. Carretera VHSA - Cardenas KM. 5.5MZ.2, LT.16 Bodega 4, Parque Industrial Deit Municipio Del Centro Villahermosa .Tabasco Codigo Postal 88660 Tel: 52 93 37 91 00

52 93 37 91 83

\

(S5Vetcogray

Campeche (Sales/Service) Vetco Gray de Mexico, S.A de C.V. Av Luis Donaldo Colosio #137 Entre42AY42B Col. Limonar, 24189 Cludad Del Carmen, Campeche Tel: 52 938 384 27 16

Reynosa (Sales/Service) Vetco Gray de Mexico, S.A de C.V Dr. Felix Escamilla #414 Col Doctores Reynosa, Tamaulipas Codigo Postal 88690 Tel: 52 89 25 50 13

52 89 25 50 14

Veracruz (Sales/Service) Vetco Gray de Mexico, S.AdeC.V. Carr. Mexico-Tuxpan KM. 296 Ejido San Miguel Mecatepec 92900 Mpio. De Tihuatlan, Veracruz Tel: 52 782 111 71 33 Mobile:. . . . 52 782 104 99 38

NIGERIA Lagos (Administration/Manufacturing/ Salos/Service) Pressure Control Systems Nigeria Ltd. 235, Muri Okunnola Street Victoria Island Lagos, Nigeria Tel: 234 1461 2062 Fax: 234 1461 2039

Олпе Port (Snlns/Sorvice) Pressure Control Systems Nigeria Ltd. Oil and Gas Free Zone Onne Port Complex Federal Ocean Terminal Onne. River State, Nigeria Tel; 234 84 239 545 Fax: 234 84 239 546

NORWAY Bergen (Drilling and Production Equipment/Aftermarket Services) Vetco Gray Norway Spelhaugen 16 N 5147 Fylllngsdalen, Norway Tel: 47 55 98 45 00 Fax: 47 55 98 07 90

Billingstad (Administration/Sales) Vetco Gray (Subsea Business) Bergerveien 12 P.O. Box 81 N-1375 Billingstad, Norway Tel: 47 66 84 3060 Fax: 47 66 84 3533

Stavanger (Drilling, Production Equipment/ Aftermarket Services) Vei(.:u C.tiiy P.O. Box 5036 Dusavik N-4084 Stavanger, Norway Tel: 47 51 63 44 00 Fax: 47 51 63 46 43

PEOPLE'S REPUBLIC OF CHINA Shanghai (Administration/Manufacturing/ Sales/Service) Vetco Gray Petroleum Equipment (Shanghai) Co., Ltd. 29 Youdong Road Minhang District, Shanghai 201110 People's Republic of China Tel: 86 21 5488 2288 Fax: 86 21 5488 7090

QATAR Doha (Sales/S ervice/Repair) Vetco Gray Pte. Ltd. P.O. Box 4697 Doha. Qatar Tel: 974 450 2212 Fax: 974 450 2215

REPUBLIC OF KAZAKHSTAN Atyrau (Sales/Engineering) Vetco Aibel 19 Satpayev Street Atyrau Plaza, 7th Floor 465050, Atyrau Republic of Kazakhstan Tel: 7 3122 201622 Fax: 7 3122 201610

RUSSIA Moscow (Suhxi/FittfitHHitiiK)) Vetco Gray UK, Ltd. 24/2 Tverskaya Street, Bldg 1,4th Floor 125009 Moscow, Russia Tel: 7 495 737 65 98 Fax: 7 495 737 65 88

SAUDI ARABIA Ai-Khobar (Manufacturing/Sales/Service) Vetco Gray Pte. Ltd. c/o Abdullah Al-Suwaiket Trading and Contacting Est. P.O. Box 321 Al-Khobar 31952 Saudi Arabia Tel: 966 3 898 5000 Fax: 966 3 898 5500

KUWAIT Safat (Sales/Service) c/o Al-Julaiah Trading & Contracting Company P.O. Box 26142 Safat, 13122 Kuwait Mobil: 965 607 8923

SINGAPORE Jurong Town (Asia Pacific-Middle East Region Administration/Manufacturing/ Sales/Service/Repair) Vetco Gray Pte. Ltd. & Vetco Gray Controls Pte. Ltd. 2 Benoi Road Jurong Town, Singapore 629876 Mail to: Jurong Town Post Office P.O. Box 212, Singapore 916108 Tel: 65 6861 3344 Fax: 65 6861 5214

THE NETHERLANDS The Hague (Sales) Vetco Gray U.K. Ltd Oostduinlaan 75 2596 JJ The Hague The Netherlands Mail to: P.O. Box 93252 2509 AG The Hague The Netherlands Tel: 31 70 373 3693 Fax: 31 70 373 3981

UNITED ARAB EMIRATES Abu Dhabi (Sales/Service) Vetco Gray Pte. Ltd c/o AlAhlia Oilfield Dev. Co. P.O. Box 4033 Abu Dhabi, United Arab Emirates Tel: 971 2 6813 300 Fax: 971 2 6813 381

UNITED KINGDOM Aberdeen (Engineering, Manufacturing) Vetco Gray U.K. Ltd. Broadfold Road, Bridge of Don Industrial Estate Aberdeen, Scotland AB23 8EY Tel: 44 1224 852000 Fax: 44 1224 852434

Aberdeen (Administration, Manufacturing/ Sales/Service) Vetco Gray U.K. Ltd. Silverburn House Claymore Drive Bridge of Don Industrial Estate Aberdeen, AB23 8GD Tel: 44 1224 356479

Aberdeen • Altens (Service) Vetco Gray Controls Ltd. Altens Industrial Estate Hareness Road Aberdeen, Scotland AB12-3LE Tel: 44 1224 872211 Fax: 44 1224 894840

Great Yarmouth (Manufacturing/Service) Vetco Gray UK Ltd Gapton Hall Road Gapton Hall Industrial Estate Great Yarmouth. Norfolk England NR31 ONL Tel: 44 1493 444777 Fax: 44 1493 414221

London (International Headquarters) Vetco International Ltd. 90 Long Acre, 2nd Floor London WC2E 9RA Tel: 44 2078 458800 Fax: 44 2078 458802

London (Sales) Vetco Gray U.K. Ltd. 5 Britannia Court The Green West Drayton, Middlesex England UB7 7PN Tel: 44 1895 458080 Fax: 44 1895 458088

Montrose (Manufacturing) Vetco Gray U.K. Ltd. Charleton Road Montrose, Angus Scotland DD10 9EB Tei: 44 1224 852711 Fax: 44 1224 852727

Montrose (Manufactunng) Vetco Gray U.K. Ltd. Brent Avenue Forties Road Industrial Estate Montrose, Angus Scotland DD10 9PB Tel: 44 1674 662900 Fax: 44 1674 662920

Nallsea (Administration/Manufacturing/ Sales/Service) Vetco Gray U.K. Ltd. Production Control Systems 2 High Street Nailsea, Bristol England BS48 1BS Tel: 44 1275 810100 Fax: 44 1275 851467

UNITED STATES ALASKA Anchorage (Sates) Vetco Gray Inc. 880 H Street, Suite 202 Anchorage, Alaska 99501 Tel: 907 522 3940 Fax: 907 522 3974

Soldotna (Sales/Service) Vetco Gray Inc. 48200 West Poppy Lane Soldotna, Alaska 99669 Tel: 907 262 5606 Fax: 907 262 5607

CALIFORNIA Bakersfi&ld (Sales/Service) Vetco Gray Inc. 4708 New Horizon Avenue Bakersfield, California 93313 Tel: 661 396 0361 Fax: 661 396 0363

Woodland (Seles/Service) Vetco Gray Inc. 1238 Alice Street Woodland, California 95776 Tel: 530 666 6329 Fax: 530 666 6421

COLORADO Denver (Sales) Vetco Gray Inc. 56880 East 37th Place Strasburg, Colorado 80136 Tel: 303 622 4935 Fax: 303 622 4936

LOUISIANA Harvey (Manufacturing/Service) Vetco Gray Inc. 3601 Janus Street Harvey, Louisiana 70058 Tel: 504 347 4594 Fax: 504 349 5759

Lafayette (Manufacturing/Sales/Service) Vetco Gray Inc. 1249 Evangeline Thruway Broussard, Louisiana 70518 Tel: 337 365 1261 Fax: 337 365 1125

Lafayette Vetco Gray Controls Inc. 105-A Balboa Drive Broussard, Louisiana 70518 Tel: 337 837 9832

New Orleans (Administration/Sales) Vetco Gray Inc. 1515 Poydras Street, Suite 1490 New Orleans, Louisiana 70112 Tel: 504 522 1522 Fax: 504 523 7507

NEW MEXICO Farmington (Sales/Service) Vetco Gray Inc. c/o Big Red Tool Company 2010 San Juan Boulevard Farmington, New Mexico 87401 Tel/Mob: 505 325 5045

Hobbs (Sales/Service) Vetco Gray Inc. 1023 South Leech Street Hobbs, New Mexico 88240 Tel/Mob: 505 393 0584

NORTH DAKOTA Willlston (Sales/Service) Vetco Gray Inc. 805 East Broadway P.O. Box 1708 Williston North Dakota 58802-1708 Tel: 701 572 3460 Fax: 701 572 3463 Mobile: 701 570 5579

TEXAS Bryan (Manufacturing/Sales/Service) Vetco Gray Inc. 2870 Harvey Mitchell Parkway Suite 800 Bryan, Texas 77807 Tel: 979 7784911 Fax: 979 778 5599

Corpus Christ! (Sales/Service) Vetco Gray Inc. 618 Diamond Cut Corpus Christi, Texas 78409 Mail to: P.O. Box 4065 Corpus Christi, Texas 78469-4065 Tel: 361 289 0933 Fax: 361 289 0940

Dallas (Sales/Service) Vetco Gray Inc. 3308 Barley Court Highland Village. Texas 75077 Tel: 972 966 0147 Mobile: 214 437 5521

Houston (World Headquarters/ Administration) Vetco Gray Inc. 3010 Briarpark Avenue Suite 300 Houston, Texas 77042 Mail to: P.O. Box 2291 Houston. Texas 77252-2291 Tel: 713 683 2400 Fax: 713 683 2421

Houston (Western Region Administration/ Manufacturing/Sale s/Service) Vetco Gray Inc. 12221 N. Houston Rosslyn Rd. Houston, Texas 77086 Mail to : P.O. Box 2291 Houston, Texas 77252-2291 Tel: 281 448 4410 Fax: 281 847 4679

Houston Vetco Gray Controls Inc. 3010 Briarpark Avenue Suite 300 Houston, Texas 77042 Tel: 713 458 3623 Fax: 713 458 3625

Houston (Drilling Controls/ Manufacturing/Service) Vetco Gray Controls Inc. 8909 Jackrabbit Road Houston, Texas 77095-3109 Tel: 281 855 3200 Fax: 281 855 0319

Kllgore (Sales/Service) Vetco Gray Inc. 4308 Hwy 42 North Kilgore, Texas 75662 Tel: 903 984 2940 Fax: 903 984 4090

McAllen (Sales/Service) Vetco Gray Inc. 124 West Ulex Avenue McAllen, Texas 78504 Tel: 956 682 2587 Fax: 956 682 2056

Navasota (Sales, Service) Vetco Gray Inc. 9930 Industrial Drive Navasota, Texas 77868 Tel: 936 870 4200 Fax: 936 870 4200

Odessa (Sales/Service) Vetco Gray Inc. 2585 West I-20 Odessa, Texas 79766 Mail to: P.O. Box 7559 Odessa, Texas 79760 Tel: 432 580 6602 Fax: 432 332 1059

UTAH Vernal (Sales/Service) Vetco Gray 399 South 1000 East Unit #5 Vernal, Utah 84078 Mail to: P.O. Box 939 Vernal, Utah 84078 Tel/Mob: 435 789 5220

WYOMING Evanston (Sales/Service) Vetco Gray Inc. Sunset Industrial Park 109A Pasture Drive Evanston, Wyoming 82930 Mail to: P.O. Box 1786 Evanston, Wyoming 82931 Tel: 307 789 4220 Fax: 307 789 8935

Rock Springs (Sales/Service) Vetco Gray Inc. 278 Production Drive Rock Springs, Wyoming 82901 Tel: 307 362 7560 Fax: 307 362 7564

VENEZUELA Maracaibo (Sales/Service/Manufacturing/ Administration) Vetco Gray de Venezuela C.A. Zona Industrial dul Norte Carretera via El Mojan, Km 3 Sector Canchancha Maracaibo, Edo. Zulia Venezuela Tel: 58 261 757 8422 Fax: 58 261 749 6870

Maturin (Sales/Service) Vetco Gray Servicios Vetco Gray de Venezuela C.A. Av. Alirio Urgarte Pelayo Sector Gajo Guarapiche No. 31 Maturin, Edo. Monagas, Venezuela Tel: 58 291 6437482 Fax: 58 291 6437204

WEST INDIES Trinidad (Sales) Vetco Gray Trinidad Ltd. 35 O'conner Street Wood Brook Port of Spain Trinidad, West Indies Tel: 868 622 7847 Fax: 868 622 0952

<S5vetcogray

Experience. Service.

Earl" Collins 18 years experience Assembly and Test Specialist

We inspected 12,600' of riser on a vessel in transit to its drilling site. Saving our customers enormous time and money is how we think.

Vetco Gray goes the extra distance for

customers, so they won't have to.

In this case we saved miles, money

and time for a company moving its

drillship between worksites. Thanks

to our Riser Active Data Acquisition

Recorder (RADAR), we internally

inspected 140 joints, each in a single

www.vetcogray.com

pass, while at sea. The process was so

efficient we even had time to inspect

the spider and gimbal. In 16 days

the ship pulled up to its worksite,

and we pulled out.

This kind of responsiveness and

creativity has defined Vetco Gray

for 100 years. It shows in our broad

range of equipment expertise, the

consistent integrity of our aftermarkct

services, the innovative ways we solve

problems and create new opportunities

for customers. Vetco Gray service.

Our experience is yours.

Experience. Integrity. Opportunity.

vetcogray

ГУРосНИИИТиАП Ассоциация МВТК

Федеральный информационный фонд отечественных и иностранных каталогов на промышленную продукцию

Каталог был представлен на выставке «Нефть и газ - 2007»

Каталог включен в базу данных «Федерального информационного фонда

отечественных и иностранных каталогов на промышленную продукцию»

Россия, 105679, Москва, Измайловское шоссе, 44, Тел./факс (095)366-5200, 366-7008, 365-5445. e-mail:; fkataIog@maiI.ru,

www.flpk.ru

Электронная копия издания изготовлена с целью её включения в базы данных Федерального информационного фонда отечественных и иностранных каталогов на промышленную продукцию, которые

формируются в соответствии с Постановлением Правительства РФ от 24 июля 1997 г. № 950 и Постановлением Правительства РФ от 31 декабря 1999

г. № 2172-р и зарегистрированы Комитетом по политике информатизации при Президенте РФ под №№ 39-50.

2007 год