CAPABILITY STATEMENT · Over the last 27 years, WMS has worked with all major coal mining companies...
11
CAPABILITY STATEMENT
Transcript of CAPABILITY STATEMENT · Over the last 27 years, WMS has worked with all major coal mining companies...
CAPABILITY STATEMENT
2
ABOUT WMSWilson Mining Services (WMS) commenced operations in 1990 and is proud to
have always been 100% Australian owned and operated.
The administration, workshop and warehouses are located near Newcastle, NSW.
The company’s secondary office and warehouse are located in Mackay, QLD with
operations throughout Australasia.
Company Directors have a wide range of qualifications and knowledge in all
matters relating to the Company’s operations and development. This includes a
strong background in the technical and general understanding of the Australian
coal mining industry together with those specialised skills required in the areas of
chemistry and commerce.
Initially the Company’s activities centred around general contracting work for
the underground coal mining industry. However, certain specialised areas were
identified as a focus for long term operations.
These include underground drilling, supply and installation of underground
ventilation control devices, the installation of secondary support systems
including polyurethane injection, fenoflex injection and cavity filling. The Micon
explosion-rated seal and Rocsil cavity fill are industry leading products.
WMS as a business is certified in AS/NZS ISO 9001:2015 Quality Management
Systems-requirements. A Safety Management System is in place which meets
all Australian Regulatory requirements. Comprehensive Training Programs for all
employees are included as part of these requirements.
The Company has operated successfully since its inception and will carry on in the
future to satisfy customer needs by developing, sourcing and providing new and
innovative products and services to the Australian mining industry.
WE WORK TO SATISFY OUR CUSTOMERS
3
WHY USE WMS
SUPERIOR PRODUCTS
Phenolic Cavity Fill
9 ROCSIL ® FOAM is the coal industry’s leading cavity product
9 Proven worldwide in a wide range of applications including cavity filling, vent plugs, seal repairs, firefighting and surface subsidence crack repairs.
9 Superior health and safety, performance, speed of installation and logistics
9 Installed cost less than competitors for a typical longwall fall recovery job
9 Other advantages over competitor products include negligible shrinkage, superior strength and adhesion properties
Polyurethane (PUR) Injection
9 Marithan ® N used to consolidate and confine fractured material including gas and air sealing
9 Marithan ® S used for stabilisation of water bearing strata
Phenolic Injection
9 Fenoflex ® PUR alternative product (no isocyanates)
9 Excellent adhesion strength and elastic qualities even after ground movements
Micon ERS Explosion Resistant and Bulkhead Seals
9 The benchmark for quality ventilation and water bulkhead seals in the Australian mining industry for over 20 years
9 Designed for a wide range of pressure ratings and can also be used for water bulkheads due to their high quality and integrity
9 Most cost effective in mines with ground movement, gas, spontaneous combustion and water accumulation issues including where cheaper, less robust cementitious seals have failed
4
WHY USE WMS
RELIABLE SERVICES 9 Proudly 100% Australian owned
9 Over 27 years of experience
9 Long-term relationships and contracts with Peabody, Anglo, Yancoal and Glencore
9 Emergency or routine capability with tailored solutions to client needs in short time frames
9 Expanding range of services
INNOVATION 9 Bulk chemical handling system
9 Surface-to-seam (remote) capability for both ROCSIL ® FOAM and Fenoflex ®
9 Cavity fill for surface subsidence remediation
PRICING 9 Competitive tiered pricing available for all chemicals
9 Hourly hire or fixed pricing options
5
MEET OUR MANAGEMENT TEAM
The WMS corporate structure is headed by a Board of Company Directors. Our management team, staff and operations teams have ex-
tensive industry and mining experience. We have a track record of delivering quality specialised products and services in a timely manner
to our clients.
Mark LeveyCEO
mob: 0400 312122
Mark has worked in the mining industry for more than 36 years in a variety of roles including Mine worker, Mining Engineer, Mine manager, General Manager and CEO. He commenced as CEO for WMS in 2013. His experience across mining operations over this period provides him with broad knowledge of market needs and also provides insight to the provision of capabilities required of WMS in order to serve his customers. He holds a Bachelor of Engineering (Mining), an MBA, a Mine Managers Certificate of Competency, and is a FAusIMM, and a GAICD.
Mitcham OstleMarketing/Sales Director
mob: 0417 224852
Mitcham has his completed his Coal Mining Certificate C ourse and has been in the mining industry for over 37 years working in the fields of strata control products and strata consolidation across the coal mining, civil and hardrock industries. He was directly involved in the introduction of Australian Roof Bolting Technology to British Coal where he spent 2 and ½ years including time spent in Japan introducing the same technology. He has been a Director of WMS since 1995 and has had extensive experience in all facets of the business and its operations.
Neil AlstonBusiness Development Manager
mob: 0437 291988
Neil has worked in the coal mining industry for more than 30 years in a variety of roles including mining engineer, technical services manager, mine manager and consultant. He commenced as Business Development Manager for WMS in July 2017. His broad experience has positioned him to deliver technical, management and business capabilities to serve his customers. He holds BE (Mining) Hons 1, ME (Mining), MBA (with Merit) and NSW Coal Mine Manager qualifications.
6
MEET OUR MANAGEMENT TEAM
Matt WilliamsQLD Operations Manager
mob: 0419 628385
Matthew has worked in the coal mining industry for more than 18 years in a variety of roles including Heavy Diesel Fitter, Mechanical Coordinator, State Manager, Business Developer, and Water Management Coordinator. He commenced as Queensland Operations Manager for WMS in 2015. His experience across the various facets of underground mining, and having performed staff and middle management roles with coal mining companies and contractors alike has positioned him to deliver a premium quality service. He enjoys meeting his clients’ challenges and establishing relationships with his customers.
Stephen HolmesNSW Operations Manager
mob: 0427 421568
Stephen has worked in the mining industry for over 33 years, starting as a multi-skilled underground mineworker. He worked towards gaining his Deputy/Crew Supervisor qualifications and was employed at various mines throughout the Hunter region. Subsequently, he took the positions as Longwall Coordinator and Longwall Superintendent as well as travelling extensively within Australia as a Mining Consultant. Stephen has enjoyed the challenges of working at a variety of mine sites, experiencing diverse workforces and mining conditions. His philosophy has always focused on ensuring the best possible outcomes for each company he has worked for, as well as the personnel he has worked with and the teams he has built.
Adam WilliamsWorkshop Manager
mob: 0408 292035
Adam has worked at WMS for more than 22 years as workshop manager including a variety of underground roles relating to the introduction and application of WMS products and services. He has an extensive knowledge of plant, equipment and chemicals used throughout the business and is instrumental in managing all logistics across the WMS business.
Kathleen Stanley Commercial Manager
office: 02 4904 8222
As a Chartered Accountant, Kathleen commenced her career with Deloitte Touché Tohmatsu in Sydney before transitioning to mining 11 years ago starting out as Commercial Superintendent for Xstrata at McArthur River Mine. Her most recent position was Financial Controller at the Cobbora Coal Mine Project. During her 7 years at Cobbora, Kathleen set-up in-house finance functionality, implementing ERP systems; finance and control procedures, statutory reporting obligations, as well taking on the role of Company Secretary during 2014-15. Kathleen joined WMS in 2018 and is responsible for the day-to-day management of the financial operations, as well as end of month processes, commercial analysis, Board reporting and tax compliance. She has a B. Bus (Accounting) qualification and is a Member of the Chartered Accountants Australia and New Zealand (CA ANZ).
SPECIALIST SERVICES
7
SUCCESS IS ALL IN THE PLANNING
Chemical Injection Services
.
Cavity Filling
Outbye &Mine Services
Ventilation ControlDevices
8
SPECIALIST PRODUCTSWMS supply a range of highly specialised products. We invest a significant amount of money and resources in R&D to bring these products to market. WMS is proud to have pioneered the introduction of phenolic cavity fill and injection products to the Australian coal industry. We have exclusive commercial arrangements with our key suppliers such as Weber in France and Micon in USA.
9 Marithan polyurethane resin injection systems used for stabilising fractured or unstable ground.
9 Rocsil foam phenolic product suitable for cavity filling, vent plugs, seal repairs, surface subsidence crack repairs, longwall recovery and firefighting.
9 Fenoflex phenolic strata injection system provides major improvements in both safety and productivity when compared to current PUR injection systems.
9 2 and 5psi Quickseal ventilation control devices are explosion tested, easier to install, dustless and more cost effective than conventional cementitious type stoppings.
9 The Micon 20psi explosion resistant seal proven worldwide and considered the benchmark for quality seals and bulkheads in the Australian mining industry since 1996.
CUSTOMERSOver the last 27 years, WMS has worked with all major coal mining companies including Anglo American, BHP Billiton, Centennial
Coal, Glencore, Peabody, Rio Tinto, Vale, Whitehaven and Yancoal.
New cost-competitive ventilation control devices soon to be commercialised are 20psi Micon HB and 20psi Quickseal. This will
provide a full suite of chemical and ventilation seal products to customers..
We have technical reports to support our claim that our products are superior to our competitors.
We understand the needs of your operations
Product development initiatives
Consistent performance
9
VALUE ADDS TO CUSTOMERS
A key strength of our business has been our ability to identify a market or
customer need and to source or develop a high quality and cost-effective solution
to satisfy that need. We are currently working on an exciting range of new and
improved products and to establish new markets, customers and alliances. A
priority is the development of bulk chemical handling systems to greatly reduce
manual handling and chemical exposure risks. We also have leading-edge proven
surface-to-seam (remote) and long hole chemical systems putting WMS at the
forefront in underground coal chemical application techniques.
Our mission is “to work safely, consistently meeting customer expectations and legal
requirements, to enhance customer satisfaction through effective application of our
products and services”.
CONTINUOUS IMPROVEMENT
SETTING THE STANDARD
WMS continues to set the standard in safety, performance and innovation. Our
primary consideration is given to our employees, workplace safety, the needs
and wants of our customers and the continual improvement in product and
service development.
10
CASE STUDIESREMOTE ROCSIL FOAM VENT PLUGS
Case Study 1 - A NSW client was looking for a product that:
1. Could be delivered approximately 200m below the surface via a borehole, and2. Could provide an airtight seal to allow for pressurisation of the chamber between the seals.
A series of workshop trials were carried out to determine the most effective way to seal off the roadways using ROCSIL ® FOAM plugs. A two directional application head was developed. These workshop trials were followed by 7 underground applications.
Two boreholes were installed 8 – 12m apart. The first hole was used to lower hoses and a purpose-built remote applicator head. A camera was lowered down the second borehole and was fitted with a light and rotating lens to allow real time footage of the seals construction.
Case Study 2 – A QLD client was looking for a product that could be rapidly deployed:
1. From the surface to seam via a single 340m borehole to create a series of vent plugs to isolate a heating event in the longwall panel, and2. On the surface with exclusion zones in place to remotely seal the mine entries during a mine fire event
Labour, equipment and materials were mobilised, risk assessments undertaken and safe work procedures developed to successfully install a series of ROCSIL ® FOAM plug seals to the satisfaction of the client. Remarkedly no camera was used for the borehole vent plugs and remote-controlled equipment was used for the mine entry seals. This work highlights WMS’s capability to quickly respond to emergency situations and deliver safe and effective world-class results.
YOUR BUSINESS IS IMPORTANT TO US
For Further Information Contact:
Mitcham Ostle - Director Marketing and Sales
mob: 0417 224 8
Stephen Holmes – NSW Operations Manager
mob: 0427 421568
Matthew Williams – Queensland Operations Manager
mob: 0419 628385
![Application by Glencore Coal Pty Ltd [2016] ACompT 6 Web viewThis is an application by Glencore Coal Pty Ltd ... Hastings Funds Management and China Merchants Group entered ... Lord](https://static.fdocuments.in/doc/165x107/5a725a497f8b9ab1538d677e/application-by-glencore-coal-pty-ltd-2016-acompt-6-nbspdoc-fileweb.jpg)
