Canopylight-Plus datasheet w installation
-
Upload
tom-knoblock -
Category
Documents
-
view
216 -
download
0
description
Transcript of Canopylight-Plus datasheet w installation
ILTINNOVATIONS
I n t e r n a t i o n a lL ight Te c h n o l o g i e s , P e a b o d y, M A ( U S A ) • 4 0 Y e a r s o f L i g h t i n g E x p e r i e n c e – W e K n o w L i g h t !
CanopyLight-Plus™ Features Include:
� Low Cost LED Canopy Light Retrofit Solution� Retrofit Sizes From "Scottsdale"* to 2'x2' "Drop Boxes"� DLC Listed (DesignLights Consortium) - Rebate Eligible� No Canopy Cutting - Fast Installation, No Leaks� Light Focused on Gas Pumps & Fueling Areas� Reduced Energy Consumption <90W vs. >250W Metal Halide� 5 Year Warranty on CanopyLight-Plus & Power Supply� CanopyLight-Plus Fixtures Made in USA
ILT Innovations Division's new CanopyLight-Plus LED Retrofit Kit is
designed to replace existing metal halide light fixtures in gasoline
pump canopies easily and cost-effectively. The LED-based retrofit kits
use the existing light fixture roof mounting system - no need to cut
the canopy during installation, eliminating potential roof leaks
common with other canopy light retrofit procedures.
And 40-Plus Years of ILT Lighting Experience Goes Into Every CanopyLight-Plus!
ILTCanopyLight-PlusLED CanopyLight Retrofit Kit
final trade show Canopylight data sheet_Layout 1 9/24/12 1:41 PM Page 1
ILT Innovations Division's improved CanopyLight-Plus LED Retrofit Kit is
Now With 23% More Lumens!
45
CanopyLight-Plus Specifications:
Optical Spec Cool WhiteLED Spec & Quantity 36X1W (White) LEDLED Color Temperature 5000KLuminaire Efficiency 73 Lm/WLED Efficiency 115 Lm/WInitial Delivered Lumen Tj = 25°C 6500 LmIlluminance Distribution at 10 ft 43.2 FC (Single Unit)Color Rendering Index (CRI) Ra > 74Beam Angle 80°
ETL Pending
Electrical SpecInput Voltage & Frequency AC 100-277 V, 50-60 HzPower Factor >0.95Input Current 0.75 A (110 V)Total Power Consumption <90 WPower Supply Efficiency >90%
Other SpecOperating Temperature & Humidity -30–50°C / 10-90% RHStorage Temperature -40~60°CDimension L12.75" X W12.75" X D3.5"Net Weight 6.5 Lbs.IP Rating IP65Lifespan >84,000 Hrs.
10 Technology Drive, Peabody, MA 01960978-818-6180 978-818-6181 fax
intl-lighttech.com
ISO 9001:2008
I n t e r n a t i o n a l L i g h t T E C H N O L O G I E SI n t e r n a t i o n a l L i g h t T E C H N O L O G I E S
12.75”
3.5"
CanopyLight & CanopyLight-Plus 12.75" x 12.75" Configuration Shown at Left.
CanopyLight Fixtures can fit any lens openingfrom 12.75" x 12.75" to 21.5" x 21.5".
*Scottsdale is Registered Trademark of LSI Industries
final trade show Canopylight data sheet_Layout 1 9/24/12 1:41 PM Page 2
8000 Lm
88.5 Lm/W
25.3 FC (Single Unit)Ra > 70
14 ft
>0.97
C US
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
PROPRIETARY AND CONFIDENTIAL
MATERIAL
FINISH
DRAWN
CHECKED
COMMENTS:
DATENAME
Part Number:
SIZE
BREV
UNLESS OTHERWISE SPECIFIED:
ADO NOT SCALE DRAWING
DWG. NO.
SCALE:
10 Technology DrivePeabody MA 01960
+1-978-818-6180www.intl-lighttech.com
THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFINTERNATIONAL LIGHT TECHNOLOGIES.ANY REPRODUCTION IN PART OR AS AWHOLE WITHOUT THE WRITTEN PERMISSIONOF INTERNATIONAL LIGHT TECHNOLOGIESIS PROHIBITED.
DIMENSIONS ARE IN INCHES:TOLERANCES:FRACTIONAL ± 1/64x. ± 0.020.x ± 0.010.xx ± 0.0050.xxx ± 0.001ANGLES ± 1°CONCENTRICITY: ± 0.002
DrawnBy Date
OFSHEET 111:1
Part Number
DrawingNumber-
-
REVISIONS
REV. ECO DESCRIPTION DATE APPROVED
12.75
12.75
3.38
Dimensions are in inches.
* 4
*CanopyLight Fixtures can fit any lens openingfrom 12.75" x 12.75" to 21.5" x 21.5".
(Contact ILT Sales for Openings Greater Than 12.75".)
Standard CanopyLight-Plus Configuration
ISO 9001 / ISO 17025
CanopyLight™ LED Retrofit Kit
Installation
320 watt Metal Halide Existing Fixtures Quick Installation
33 watt Scottsdale kit 33 watt Generic Retrofit kit Install reflector bar perpendicular
to pump islands
74496 Road 397 Curtis, NE 69025
Office (308) 367-4542 Cell (308) 660-0410 Fax (310)-707-4307
Tom Knoblock