Canadian Industrial Equipment News June 2009
-
Upload
annex-newcom-lp -
Category
Documents
-
view
227 -
download
6
description
Transcript of Canadian Industrial Equipment News June 2009
www.cienmagazine.com JUNE 2009Pu
blic
atio
ns M
ail
Agre
emen
t #
40
06
92
40
Pl
ease
pee
l label
& a
ffix
to
Rea
der
Rep
ly C
ard
photo courtesy of electromate
plus ... focus on instrumentation and controls, new product highlights, application features and upcoming events
TEST & MEASUREMENT
Serving Canadian Industry Since 1940
Dial Thermometers designed for direct inser-tion into sanitary process applications. page 3
Electric Pressure Calibrator makes one- handed calibration quick and easy. page 3
PosiTest AT-A Automatic Adhesion Tester mea-sures coating adhesion to rigid substrates. page 4
Temperature measurement added to ProSense™ line of process sensors. page 6
cien june 09 pg 01.indd 1 02/06/09 11:37 AM
Before there was OMEGAMATIONTM there was Rube Goldberg
NEED MORE
CARTOONS?Go to: www.omegamation.ca for your daily dose of RUBE GOLDBERG!
Where Do I Go for Automation Products?omegamation.ca, of Course!Où puis-je trouver des produits d'automatisation?Sur omegamation.ca, bien entendu!
English Service Français
Visit—omegamation.caTM
To order your FREE Premier Edition omegamation.caTM
Complete Automation Handbook and Encyclopedia. It’s loaded with thousands of Automation products
and over 200 pages of technical reference!
Téléphonez ou consultez notre site web omegamation.ca MC pour demander votre exemplaire
GRATUIT de l'édition spéciale à couverture rigide du manuel et
encyclopédie complets sur l'automatisation OMEGAMATION MC
FREE!HARDBOUND
HANDBOOK
Manuel à couverture
rigide gratuit!
Visitez www.omegamation.ca pour votre dose quotidienne de RUBE GOLDBERG!
Starts atÀ partir de
$4250
Starts atÀ partir de
$65
Starts atÀ partir de
$34
Starts atÀ partir de
$39Starts atÀ partir de
$63
Starts atÀ partir de
$750Starts atÀ partir de
$400
Starts atÀ partir de
$276
Starts atÀ partir de
$168
Starts atÀ partir de
$435
Your single source for process measurement and control products!Votre source unique en produits de mesure et de contrôle des procédés!
Covered by U.S. and Internationalpatents and pending applications
Couvert par des brevetsaméricains et étrangers et par des
applications en cours
*Breveté*PATENTED1-888-55-663421-888-55-OMEGA
TM
omegamation.ca TM
Cover Art: Based on an Original Norman Rockwell illustration © The Curtis Publishing CompanyRube Golberg © Rube Goldberg, Inc.
976 BergarLaval, Québec
Canada H7L 5A1Shop Online at Magasinez en ligne à
© COPYRIGHT 2009 OMEGA ENGINEERING, INC. ALL RIGHTS RESERVED© COPYRIGHT 2009 OMEGA ENGINEERING, INC. TOUS DROITS RESERVES
For Sales and Service, Call TOLL FREE Pour les ventes et le service-composez Direct Link:
omega.ca/509DE3Lien direct:
No. N°
Starts atÀ partir de
$219Weather Resistant WIRELESS RTD TransmittersTransmetteurs de RTD SANS FILrésistants aux intempéries
UWTC-REC2 WIRELESSreceiver with analog outputRécepteur SANS FIL avec sortie analogique, $294
� NEMA-4X (IP65) Weather Resistant Enclosure
� Up to 3 Years Battery Life� Works with Every OMEGA UWTC Series Receiver,
Wi Series Meter/Controller/Scanner and DIN Rail Receiver� Boîtier NEMA-4X(IP65)
résistant aux intempéries� Durée de vie de la pile jusqu'à 3 ans� Fonctionne avec tous les récepteurs
de la série UWTC, les indicateurs/contrôleurs/indicateurs séquentiels de la série Wi et les récepteurs à montage sur rail.
Complétez votre système SANS FIL avec un récepteur à connexion USB ou basé sur le Web
Complete Your WIRELESSSystem With a USB or Web -Based Receiver!
UWRTD-2-NEMA
PRS-H-M12Series
SANITARY RTDProbeSonde
SANITAIRE RTD
Rugged Pipe Plug Thermocouple ProbesSonde à thermocouble robuste avec bouchon fileté
TC-NPT Series
Extruder RTDProbe with Compression FittingSonde RTD d'extrusion avec raccordsà compression
CF-000-RTD-2-60-1
Universal WIRELESS RS232 to USB Transceiver
Émetteur-récepteur SANS FILuniversel RS232 à USB
WRS232-USB
TJ-USB Series
Transition Joint Thermocouple Probe with USB Interface andFree SoftwareSonde à thermocouple à joint de transition avec interface USB et logiciel gratuit
Type 1 Enclosures
with KnockoutsEnceintes de type 1
avec pastilles
SCE Series
Enclosure Heaters for Protection from Freezing or Condensation in EnclosuresCalorifères d'armoire pour protéger du gel oude la condensation
SRFE-6 SA1-RTD Series
Advanced-Design Surface-Mount RTD Provides Class A Accuracy
RTD avancée pour montage en surface, précision de classe A
Miniature Low CostNon-Contact INFRARED
Temperature Sensor/TransmitterCapteur/transmetteur miniature de température
sans contact à INFRAROUGE économique
OS101 Series
HUB 444
SiNetTM Multi-AxisMotion Control Programmable
Networking HubConcentrateur programmable
SiNetMC pour le contrôle du mouvement sur plusieurs axes ELC-PLC Series
ELC Programmable Logic Controllers/ ModulesContrôleurs logiques programmables et modules
PLC Touchpanel
Panneaux tactiles à
CLP intégré
EZP-S6W-RS
Super OMEGACLAD® XL Thermocouple Probe with Industrial Head AssemblySondes de thermocouple
Super OMEGACLAD® XLavec jeux de têtes industrielles
NB1-CAXL-14U-12
Linear Slides—Pneumatic Mini DLM DirectConnect™ Modular Series
Tiroirs linéaires pneumatiques – série modulairemini DLM DirectConnectMC
DLM SeriesRotary Actuators—Pneumatic, Flange
Mountable DRF DirectConnectTM SeriesActionneurs rotatifs–pneumatiques
série modulaire à collerette DRF DirectConnectMC
DRF-075M-90 OMEGAFLEX®
Polyurethane,95A Shore Durometer Ether-BasedDuromètre Shore 95A OMEGAFLEXMD en polyuréthane base Ether
TYUTH95 Series
Starts atÀ partir de
$114
Starts atÀ partir de
$119Starts atÀ partir de
$199
Starts atÀ partir de
$244
Starts atÀ partir de
$1750
CIEN_0509.QXD:CIEN 4/13/09 4:31 PM Page 1
101 101
cien june 09 pg 02.indd 2 02/06/09 11:40 AM
june 2009 Vol. 70 No. 6
Editor and Associate PublisherOlga Markovichtel: (416) 510-5113
Publisher Michael Kingtel: (416) 510-5107
Sales Manager Mark Larchertel: (416) 510-5125
Circulation Diane Rakofftel: (416) 510-5216
Art Director Sheila WilsonProduction Manager Kim CollinsReader Service Liz CallaghanAdministrative Assistant Diane MoskalVice-President, Canadian Publishing Alex PapanouPresident, Business Information Group Bruce Creighton
Advertising Representatives — Canada
Toronto, Ont.: Michael King, Mark Larcher12 Concorde Place, Suite 800, Toronto, ON. M3C 4J2. Tel. (416) 442-5600; Fax (416) 510-5140.
Head Office12 Concorde Place, Suite 800, Toronto, ON. M3C 4J2. Tel. (416) 442-5600; Fax (416) 510-5140.
Subscription rates: Canada: $71.95 plus applic-able taxes for one year, 11 issues; $115.95 for two years, 22 issues. USA: $75.95 US Funds per year, 11 issues. All other foreign: $98.95 US Funds per year, 11 issues. Single copy: $10.00.
From time to time we make our subscription list available to select companies and organizations whose product or service may interest you. If you do not wish your contact information to be made available, please contact us via one of the follow-ing methods ...
Phone: 1-800-268-7742; Fax: 416-510-5130; Email: [email protected]
Mail to: Privacy Officer, Business Information Group, 12 Concorde Place, Suite 800, Toronto, ON. M3C 4J2.
Editorial Purpose: Canadian Industrial Equipment News provides the answers to increased produc-tion, efficiency and profit by keeping our readers informed of the latest technological advances in products, components and maintenance materials, offering the competitive edge in today’s market.
Canadian Industrial Equipment News (ISSN 0319-5902) is published 11 times a year by Business Information Group, L.P., a leading Canadian in-formation company with interests in business-to-business information services.
“Printed in Canada. All rights reserved. The con-tents of this publication may not be reproduced either in part or in full without the consent of the copyright owner.”
The contents of this magazine are protected by copyright and may be used only for your personal non-commercial purposes. All other rights are re-served and commercial use is prohibited. To make use of any of this material you must first obtain the permission of the owner of the copyright. For further information please contact Olga Mar-kovich at 416-510-5113.
Publications Mail Agreement No. 40069240. Return undeliverable Canadian Addresses to Circulation Dept. — Canadian Industrial Equip-ment News, 12 Concorde Place, Suite 800, To-ronto, ON M3C 4J2.
CIEN, USPS 761-830 is published monthly by Business Information Group. US office of publi-cation: 2424 Niagara Falls Blvd, Niagara Falls, NY 14304-0357. Periodicals Postage Paid at Niagara Falls, NY. US postmaster: Send address changes to Canadian Industrial Equipment News, PO Box 1118, Niagara Falls, NY 14304.
Printed in Canada.
USPS 761-830 ISSN 0319-5902
Member, Canadian Business Press
On the cover ...SANITARY DIAL THERMOMETERSThe Omega sanitary bimetal thermometer features all 316/316L stainless steel wetted parts with a 3-A certified design. The hermetically sealed sanitary dial thermometer has an easy to calibrate reset screw along with a standard glass lens. This product is specially designed for direct insertion into sanitary process applications when a standard thermowell is not specified or the process environ-ment is not exposed to pressure. Ideal for the food, beverage, and pharmaceut-ical industries.OMEGA
CIRCLE NO. 11 ON READER REPLY [email protected], www.omega.ca
ELECTRIC PRESSURE CALIBRATORThe Fluke 719 Electric Pressure Calibrator, with its built-in electric pump, provides pressure calibration at your fingertips. Now you can calibrate and test pressure devices quickly and easily with one hand. Use the programmable pump limit settings to elimin-ate over-pressurization and to set ‘pump to’ pressure values. The unique cleanout port design reduces pump failures and makes the 719 easy to clean without repair. ITM Instruments Inc.
CIRCLE NO. 12 ON READER REPLY [email protected], www.itm.com
EMERSON. CONSIDER IT SOLVED.™
Satisfy your customers’ most demanding long-term steam & hot water needs.
Count on smiling customers everywhere from commercial laundries and dishwashers to manufacturers of commercial cooking equipment. The Series 8220 steam and hot water valve from ASCO is the hottest new thing in its class. Its high-flow design provides unequaled throughput, with up to 60 percent more flow. Its ultra-reliable construction endures the rigors of steam and hot water service up to four times longer than other valves. It even reduces inventory by eliminating the need for separate valves for steam and hot water service. Use the Series 8220 to satisfy nearly every steam and hot water application you’ve got!
The
Em
erso
n lo
go is
a t
rad
emar
k of
Em
eronso
n E
lect
rico
Co
. ©
20©
099
For product information:ASCO Valve Canada | www.ascovalve.caTel: (519) 758-2700 | [email protected]
ASCO_SteamAd_CIEN_8.125x10.875.ai 2/23/09 10:57:27 AM
www.cienmagazine.com june 2009 3
CIRCLE NO. 102 ON READER REPLY CARD
cien june 09 pg 03.indd 3 02/06/09 11:41 AM
4 june 2009 www.cienmagazine.com new products
On the cover ...AUTOMATIC ADHESION TESTERThe new PosiTest AT-A Automatic Adhesion Tester measures ad-hesion of coatings to metal, wood, concrete and other rigid sub-strates and now features an electronically controlled hydraulic pump. The new electric pump applies smooth and continuous pull-off pressure at user-selectable rates. New features include electronically con-trolled hydraulic pump, user selectable pull rates for complying with a variety of international test methods, built-in rechargeable batteries, convenient shoulder strap and AC power. Full digital keypad allows operator to easily select dolly sizes, specify pull rate, change measure-ment units or store readings with the touch of a button.DeFelsko Corporation
CIRCLE NO. 13 ON READER REPLY [email protected], www.defelsko.com
BRISTLE BLASTERThe MBX Bristle Blaster removes corro-sion and generates an anchor profile by using a specially designed rotary bristle tool. Bristle tips are designed to strike the surface with kinetic energy that is equiva-lent to standard processes that use grit blast media, resulting in a texture and vis-ual cleanliness that mimics those obtained by grit blasting. The tool is ideal for spot-repair applications, but can also be used for larger surface areas when other metal cleaning processes may be prohibitive. The process provides an efficient means for the removal of corrosion, mill scale, defunct protective coatings, and for post-weld cleaning operations.Stone Tucker Instruments Inc.
CIRCLE NO. 21 ON READER REPLY [email protected], www.stone-tucker.com
NEEDLE VALVESThe A105 needle valves are suitable for use in on and offshore applications. The primary applications are oil and gas, petrochemical and energy related indus-tries. The valves provide safe operation, long service and reliability. The range of needle valves spans 1/4” through 1” and the instrument manifolds are 1/4” through 1/2”. Pressure range is 6000 psi amd 1000 psi. Materials of construction include A105 bodies with 316 SS trim. Distribution enquiries welcome.Alco Valves
CIRCLE NO. 22 ON READER REPLY [email protected], www.alco-valves.com
INTELLIGENT LIFTING ARMThe newly redesigned Easy Arm®Q/iQ Intelligent Lifting Arm delivers pinpoint precision in a wide range of speeds, mak-ing it suitable for precision alignment ap-plications. It acts like an extension of the operator’s arm, guided by their intelli-gence but taking on the bulk of the work. The new design comes in 75 kg and 150 kg capacities. It is suitable for localized lifting in applications such as: loading/un-loading machined parts, reaching into a work cell or around obstructions, moving products around a work cell and precision placement of expensive products.Gorbel Inc.
CIRCLE NO. 23 ON READER REPLY [email protected], www.gorbel.com
HIGH DENSITY POWER SUPPLYThe PM37223-10P is a power factor cor-rected, 360V @30kW liquid-cooled AC-DC power supply with power density of 27.4w/in3 in a 2U 19” rack configuration. At a high efficiency of >92% at 80% of load, it provides a 360 Volt at 83 Amp, remote sensed, fully floating, Over Cur-rent (OCP), Over Voltage (OVP), and Over Temperature (OTP) protected out-put. Typical uses of liquid cooling are found in many applications such as super-computers, test equipment, industrial, broadcast, and metal and chemical manu-facturing applications that depend on regulated and highly reliable DC current power supplies.Pioneer Magnetics
CIRCLE NO. 24 ON READER REPLY CARDsales@pioneermag,com, www.pioneermag.com
WIRE MANAGEMENT TOOLSAutomationDirect has added to its line of wire stripping and crimping tools. The new self-adjusting cut-and-strip tool fea-tures the widest stripping capacity of any tool of its type, cutting flexible wires up to 8 AWG and rigid wires up to 16 AWG. Easily interchangeable stripping cassettes, colour coded by blade type, are available for stripping a wide range of most mod-ern insulation types, from PVC to PTFE. Replacement blade and jaw inserts are available. A new cable stripping tool re-moves insulation from copper and fiber optic audiovisual, data transmission, in-strumentation, signal, and telephone cables up to 1 mm. Its precise, nine-pos-ition blade height adjustment wheel pro-vides for fine adjustability and repeatabil-ity. Also available is a crimping tool series with handle and die sets for various wire sizes and terminal types.AutomationDirect
CIRCLE NO. 25 ON READER REPLY [email protected], www.automationdirect.com
CIEN Introduces TOPIC ALERTTimely information, with the power to drive your business success.Now you will have access to the same news information as the business press, hot from the news wires, and CIEN Topic Alert will be your link, delivering to you only the information that matters to you.
TOPIC SELECTION CUSTOMIZED BY YOUYou select only those topics relevant to your business enterprise and success. We’ll deliver only those news items with the potential to power your achievements. Track competitors, investments, industry events, mergers and acquisitions, and more.
YOU SELECTFrom a wide range of topics such as Manufacturing, Automotive, Trucking, Transportation Logistics, Mining, Insurance, Waste Management, Broadcasting, Retail, Pulp & Paper, Plastics, Solid Waste & Recycling and More.
ARCHIVESGain Access to thousands of cienmagazine.com articles.
WE DELIVER RIGHT TO YOUR E-MAIL BOXGet the information at a predetermined time, when you are ready to receive it. The CIEN Topic Alerts selected by you, are delivered to your e-mailbox at a time and frequency specified by you.
HERE’S HOWVisit us at cienmagazine.com and select Topic Alert. Start receiving your customized Topic Alerts Today.
Business Information Group, Contact: Melinda MarasiganPhone: 416 442 5600 ext 3548, Toll Free: 1-866-543-7888
800 – 12 Concorde Place, Toronto, Ontario M3C 4J2
TOPIC ALERTtimely information that matters
TITANIUM BOOSTERMakino’s sinker EDM Titanium Booster technology enhances productivity and ca-pability in roughing processes of titanium and titanium alloys. The technology util-izes a 60 amp power booster and new ma-chining conditions to increase roughing speeds for up to 80% while reducing elec-trode wear. Graphite based electrode ma-terial is used for processing, eliminating the need for copper and copper tungsten materials. Makino’s Titanium Booster technology is available for all EDNC ser-ies machines.Makino
CIRCLE NO. 71 ON READER REPLY [email protected], www.makino.com
INTEGRATED CONTROLLERThe EZ-ZONE® RM is a configurable multi-loop temperature/process controller in one space-saving DIN-rail mounted package. It can be used as a PID temper-ature/process controller, an over/under limit controller or these functions can be combined into an integrated controller. Other control functions can be combined into an integrated controller. Other con-trol functions can be integrated as well, such as high amperage power controller output, creating a complete and integrated thermal loop controller all in one package. EZ-ZONE RM can be configured with between 1 to 16 modules controlling from 1 to 64 loops. Watlow
CIRCLE NO. 72 ON READER REPLY [email protected], www.watlow.com
ROTATING COMPONENT FASTENINGThe M-Type Shaftloc® rotating com-ponent fastening device is used as a lock-ing device for rigidly mounting hubless gears, sprockets, pulleys, cams or any thin-walled components onto an inch or metric shaft. They feature infinite radial and axial adjustments and quick lock and release action. Due to its asymmetric thread geometry, a large radial clamping force is produced when the nut is tight-ened. It is a precision dynamically bal-anced product suitable for high-speed ap-plications. This simple two-piece keyless fastener can be installed within seconds.Stock Drive Products
CIRCLE NO. 73 ON READER REPLY [email protected], www.sdp.si.com
MACHINE VISIONLMI’s maeestro™ allows engineers to rapidly design, install, and start-up any machine vision solution while reducing time and materials using only two univer-sal maestro™ modules for all installations. Maestro™ is comprised of two modules. The P800 module is the master controller that interfaces with the encoders and the I/O, but also delivers microsecond syn-chronization, power, and safety on CAT5E cables for up to 8 or more cameras and light sources, all from a single power sup-ply. All timing, triggering, synchroniza-tion, sorting, and reject activations are completed by the maestro P800 module. As a result, all devices are slaves to the P800 controller, including the host com-puter that performs the image processing.LMI Technologies, Inc.
CIRCLE NO. 74 ON READER REPLY [email protected], www.lmitechnologies.com
cien june 09 pg 04.indd 4 02/06/09 11:42 AM
Job Prev. UsersFilename Last Modifi ed
Client
Bleed
Trim
Live
Scale
Cont
ent
Fonts & Placed Graphics Inks
072-003 H 072-003 H_Industry 8.5x11 4C.indd 1/6/09 9:42 AM MSS2/MSS1
Gorman-Rupp
None
8.5 in x 11 in
None
None
Family StyleTrade Gothic (Bold Condensed No. 20, Condensed No. 18), Impact (Regular)
Name Color Space Eff. Res.PumpPeople™-1L>Canada_Blue.eps (Up to Date), Gears.psd (Up to Date; CMYK; 500 ppi), Pump Grouping for Food_NEW.psd (Up to Date; CMYK; 204 ppi)
Cyan Magenta Yellow Black
None
Setu
pN
otes
Gorman-Rupp of Canada Ltd. • 70 Burwell Road • St. Thomas • Ontario N5P 3R7 • Tel: (519) 631-2870 • Fax: (519) [email protected] • www.grcanada.com
©2008 Gorman-Rupp of Canada Limited. Gorman-Rupp of Canada Limited is an ISO 9001:2000 Registered Company.
www.grcanada.com
PUMPS FOR
INDUSTRY
Gorman-Rupp of Canada Limited has been manufacturing pumps, pumping systems and providing superior fl uid handling solutions in Canada since 1960.
Our industry leading products are shipped across Canada from our 5,574 square meter state-of-the-art Canadian manufacturing facility.
Gorman-Rupp of Canada Limited is an ISO 9001-2000 company with a long history of commitment to manufacturing excellence, uncompromised performance and industry leading customer service.
Whether your application requires standard centrifugal, self-priming, prime assist, submersible or positive displacement pumps, you’ll fi nd the right pump for your job at Gorman-Rupp.
CIRCLE NO. 103 ON READER REPLY CARD
cien june 09 pg 05.indd 5 02/06/09 11:44 AM
6 june 2009 www.cienmagazine.com new product highlights
On the cover ...
PROCESS SENSORSAutomationDirect’s ProSense™ line of process sensors now includes temperature switches, temperature transmitters and RTD temperature probes. The TSD25 series switches offer dual output setpoints over an operating temperature range of –13 to 284°F. With 4-20mA analog outputs, the TTD25 series of transmitters provide a compact temperature monitor-ing system over temperature ranges from 0 to 100°C or 0 to 300°F. The four-wire, 100 ohm platinum RTD probes are made of durable 316 stainless steel and measure temperatures ranging from –40 to 302°F.AutomationDirectCIRCLE NO. 14 ON READER REPLY [email protected], www.automationdirect.com
PROGRAMMABLE LOGIC CONTROLLERLG/LS Industrial Systems’ new XGT Ser-ies is a fast, compact and open network solution, next generation Programmable Logic Controller. This industrial work-horse can support the most demanding ap-plications and features fast CPU processing speed 28 ns/step. Maximum 32,768 point I/O control from medium to large scale sys-tem. Sufficient memory 64K step. Quick upload/download via USB port. The XGT Series supports various communication solutions ranging from field control to in-formation level with Fast Ethernet, Profi-bus-DP, DeviceNet, MODBUS and even MECHATROLINK-II.Davis Controls Ltd.
CIRCLE NO. 26 ON READER REPLY [email protected], www.daviscontrols.com
QC IndustriesCIRCLE NO. 29 ON READER REPLY CARD
[email protected], www.qcindustri29 es.com
VENTILATION FANSEnvira-North introduces a new line of high volume low speed (HVLS) fans. The Altra-Air fan incorporates WhalePower’s revolutionary Tubercle Technology™. The fan will deviate from traditional HVLS fans by featuring a five-bladed de-sign with the Tubercle Technology™ — advanced engineering inspired by the bumps on the leading edge of Humpback whale flippers. These fans qualify for a number of different energy efficient in-centives for both new builds and retrofits. These new fans destratify the air more ef-ficiently by evening out temperature in any big space and make it a whole lot more comfortable. The fans come in sizes from 8 ft. to 24 ft. and have variable speed operation.Envira-North Systems Ltd.
CIRCLE NO. 30 ON READER REPLY [email protected], www.enviranorth.com
INFRARED TEMPERATURE CALIBRATORThe Reed Model BX-500 infrared tem-perature calibrator is ideal for calibrating non-contact infrared thermometers up to 500°C with temperature controlled black-body target with a diameter of 57mm as well as fixed emissivity of 0.95. It offers a wide field of view to compensate for op-tical variations in individual infrared thermometers. Designed with ease of use in mind, simply set the desired temper-ature in increments of 0.1°, wait for the calibrator to attain equilibrium, point the infrared thermometer at the target and measure the radiated energy. The contact RTD reference well is located directly behind the black-body target to assure even higher accuracies of +/–0.1°C.ITM Instruments Inc.
CIRCLE NO. 27 ON READER REPLY [email protected], www.itm.com
RECTIFIERThe power factor corrected 8.1kW recti-fier in a 5” x 5” package is designed for supporting standalone or N+1 redundant power applications. A standard 3U, 23” power shelf can provide up to 32.4kW of system power or 24.3kW of redundant power. The unit features forced internal air-cooling with built-in protection from electrical overloads.Pioneer Magnetics, Inc.
CIRCLE NO. 28 ON READER REPLY [email protected], www.pioneermagnetics.com
BELT CONVEYORSThe Automation Series low profile belt conveyors feature a Tension Release Tail that makes belt changes and under-belt cleaning fast and easy. The Tension Re-lease Tail operates at the push of a button to relieve tension on the belt by quickly flipping up and out of the way. No tools are required, making it easy for an oper-ator to release the tension for cleaning under the belt. The tail reseats, reapplying tension, with a gentle push. Its unique de-sign retains all tension and tracking equip-ment adjustments when tension is relieved and reapplied. The tail uses a completely separate mechanism for relieving the ten-sion than it uses for making tension and tracking adjustments. The Tension Release Tail is standard on all Automation Series conveyors, including AS40 End Drive and AS65 Center Drive conveyors.
CIRCLE NO. 104 ON READER REPLY CARD
cien june 09 pg 06.indd 6 02/06/09 11:44 AM
If you would like to discuss anapplication, contact:
11510 Goldcoast DriveCincinnati, Ohio 45249-1621(800) 903-9247/fax: (513) 671-3363www.exair.com/16/440.htm
A bad choice could cost you thousands!Look Familiar?When hot weather causes the electronics inside a control cabinet to fail, there is a panic to get the machinery up and running again.Th e operator might choose to simply open the panel door and aim a fan at the circuit boards. In reality, the fan ends up blowing a lot of hot, humid, dirty air at the electronics where the cooling eff ect is minimal. If the machinery starts functioning again,the likelihood of repeated failure is great since the environment is stillhot (and threatens permanentdamage to the circuit boards). Worse yet, that open panel door is an OSHA violation that presents a shock hazard to personnel.
The Real Solution!Stop electronic downtime with an EXAIR Cabinet Cooler®! Th e complete line of low cost Cabinet Coolers are in stock and can ship now. Th ey mount in minutes through an ordinary electrical knockout and have no moving parts to wear out. Th ermostat control to minimize compressed air use is available for all models. All Cabinet Coolers are UL Listed to US and Canadian safety standards.
NEMA 4 and 4XCabinet Coolers
NEMA 4 and 4X Cabinet Coolers for large heat loads up to 5,600 Btu/hr. Th ey are ideal for PLCs and modular controls.
Enclosure remains dust-• tight, oil-tight and splash resistant
Suitable for wet locations • where coolant spray or hose down can occur
Type 316 Stainless Steel Cabinet Coolers
Type 316 Stainless Steel Cabinet Coolers for NEMA 4X applications are available for heat loads up to 5,600 Btu/hr.
Resists harsh environments • not suitable for Type 303/304
Ideal for food and chemical • processing, pharmaceutical, foundries, heat treating and other corrosive environments
Mini NEMA 12, and 4X Cabinet Coolers
Th e mini NEMA 12, 4 and 4X Cabinet Coolers for small heat loads up to 550 Btu/hr. are ideal for control panels, relay boxes, laser housings, electronic scales.
Measures 5” (127mm) high •
Mounts top, side or bottom•
Enclosure remains dust-• tight and oil-tight
High TemperatureCabinet Coolers
High Temperature CabinetCoolers for NEMA 12, 4 and 4X applications are available for heat loads in many capacities up to 5,600 Btu/hr.
Suitable for ambients up to • 200°F (93°C)
Ideal for mounting near • ovens, furnaces, and other hot locations
Non-Hazardous PurgeCabinet Coolers
NHP Cabinet Coolers keep a slight positive pressure on the enclosure to keep dirt from entering through small holes or conduits. For use in non-hazardous locations.
Uses only 1 SCFM in purge • mode
For heat loads up to 5,600 • Btu/hr.
NEMA 12, 4 and 4X •
NEMA 12Cabinet Coolers
Th e NEMA 12 Cabinet Coolers for large heat loadsup to 5,600 Btu/hr. areideal for PLCs, line control cabinets, CCTV cameras, modular control centers, etc.
Measures 8” (203mm) high •
Mounts top, side or bottom•
Enclosure remains dust-tight• and oil-tight
The Secret To Keeping Electronics Cool!
Jeff Hauck, Lasercraft Inc. Fairfi eld, OH
“It took us three days to get a replacement computer cabinet and we didn’t want to risk another heat failure. Fans weren’t an option since they would just blow around a lot of hot air. Freon-type air conditioners like those on some of our other machines were a constant maintenance project of their own. We purchased EXAIR’s Model 4330 NEMA 12 Cabinet Cooler
System since it was easy to install and requires no maintenance.”
ETC™ Electronic Temperature Control
CIRCLE NO. 105 ON READER REPLY CARD
cien june 09 pg 07.indd 7 02/06/09 11:45 AM
8 june 2009 www.cienmagazine.com focus on ... test & measurement
COATING THICKNESS GAUGEThe REED CM-8820 Coating Thick-ness Gauge features an exclusive micro-computer LSI circuit and crystal time base and offers high accuracy of +/-5% +0.1. A large, easy-to-read LCD display provides exact readings without guess-work or errors. The gauge also features automatic dual range (hi/lo) calibra-tions and an integral remote probe. The instrument is suitable for measuring the thickness of plating, lacquer, por-celain, enamel, phosphide, copper and aluminum tiles, paper and much more.ITM Instruments Inc.
CIRCLE NO. 31 ON READER REPLY [email protected], www.itm.com
CHECK-LIST BOOKSThe “CHECKER”® inspection check-list books are available for all industries. Each book will last six to seven months on a single shift operation with 150 two-copy carbonless sets in each book. There is even an optional storage pouch for storing and mounting each book with the vehicle or the machine to make it more convenient for everyone to access and use. Devtra Inc.
CIRCLE NO. 32 ON READER REPLY [email protected], www.thechecker.net
COUNTER, TIMER, TACHOMETERThe Series LCT216 combines a versa-tile timer, counter, and tachometer in one device. The bright, easy-to-read display shows both the desired set point and the current process value as well as the operating mode that the control is functioning in. The fourteen pre-pro-grammed timer functions are easy to set up and cover most applications. The counting functions include one stage or two stage counting along with batch, total or dual counting modes. The Ser-ies LCT216 can also be used as a tach-ometer to measure rotational speeds.Dwyer Instruments, Inc.
CIRCLE NO. 33 ON READER REPLY [email protected], www.dwyer-inst.com
ROTATING VANE ANEMOMETEROmega’s new HHF141 series of rotat-ing vane anemometers is a high-quality, highly accurate product that provides air velocity measurements in harsh environ-ments via a user-friendly and intuitive interface. Suggested applications for this CE compliant product include the auto-motive industry, HVAC, laboratory, com-puter rooms, environmental control, fume hood monitoring, and other applications where precise air measurement is required.OMEGA
CIRCLE NO. 34 ON READER REPLY [email protected], www.omega.ca
LINEAR MEASUREMENTTR Electronic has introduced a new cas-cading Linear Measurement System, a series of linear transducer modules that can be interconnected to measure typ-ical distances of 5 to 60 feet and beyond. The LMC-50 consists of IP65 rated linear measurement modules in a profile housing. The modules can be connect-ed together across the entire measuring distance and require no maintenance. The units provide a seamless measur-ing system along the entire distance. In-dustry leading communication standards such as Ethernet/IP, Profibus and CAN will be available on customer demand.TR Electronic
CIRCLE NO. 37 ON READER REPLY [email protected], www.trelectronic.com
HEADSPACE ANALYZERThe PAC CHECK® Model 650 EC benchtop dual oxygen and carbon mon-oxide headspace analyzer is ideally suited for applications in which CO2 gas is used to minimize microbial activity or enhance products to meet shelf life objectives. The EC’s simplified menu structure lets users go from “set up test” in less than a min-ute, making it extremely fast and easy to operate. It can measure both O2 and CO2 concentration ranges from 0 to 100% in rigid, semi-rigid and flexible packages.Mocon, Inc.
CIRCLE NO. 38 ON READER REPLY [email protected], www.mocon.com
TEST SETThe 990LT CopperPro Test Set is a flex-ible, customer-upgradeable field test set for subscriber loop fault identification and voice-data line qualification. It of-fers a set of field-installable options that match testing power to technician skill level. By using the appropriate set of op-tions CopperPro can support voice, spe-cial services, ADSL, ADSL2+ and VDSL.Fluke Networks
CIRCLE NO. 39 ON READER REPLY [email protected]
AIR QUALITY MONITORThe Model CO200 checks for Carbon Dioxide concentrations and is ideal for monitoring the air quality in factories, office buildings and anywhere that high levels of carbon dioxide are generated. It features a maintenance-free NDIR (non-dispersive infrared) CO2 sensor, as well as a visible and audible CO2 warning alarm with relay output for ventilator control. Indoor air quality is displayed ppm with “good”, Normal and Poor. The unit con-tains an Automatic Baseline Calibration (minimum CO2 level over 7.5 days) or a manual calibration in fresh air, and features a Max/Min CO2 value recall function. Extech Instruments
CIRCLE NO. 35 ON READER REPLY [email protected], www.extech.com
DATA LOGGERSVeriteq’s VL2000 series data loggers are fully validated and designed for regu-lated industries/pharmaceutical applica-tions — with NIST-traceable, ISO/IEC 17025 calibration, cGMP/FDA compli-ant measurement and redundant record-ing. All data are recorded in real-time and maintained in a secure format for later re-view and reporting. Some features of the loggers include: portable self-contained relative humidity & temperature data log ger for critical validation applications; equipped with internal relative humidity & temperature sensors, memory and ten-year battery; password protected setup.Alpha Controls & Instrumentation
CIRCLE NO. 36 ON READER REPLY [email protected], www.alphacontrols.com
HEAVY DUTY, PERFORMANCE TESTEDREMOVE ‘ALMOST IMPOSSIBLE’ BUILD-UP
TACKLE GLUE, PAINT, RUST, DIRT, RESIN, GREASE & TILEON STEEL & CONCRETE FLOORS, WALLS & EQUIPMENTIN HAZARDOUS & NON-HAZARDOUS ENVIRONMENTS
WITH OUR LONG REACH PNEUMATIC SCALER.
Celebrating Over 50 Years! 261 Bowes Road, Concord, Ontario L4K 1H8
Allan FyfeEquipment Limited
Ontario: 905-669-1313 • Quebec 514-336-4974 • www.allanfyfe.com
HEAVY DUTY
easy to use!capability plus
Ogdensburg, New York USA Phone: 315-393-4450
New UTG ME
Thru-Paint model
available
■ Scan Mode■ HiLo Alarm■ Internal Memory■ Sturdy, compact design■ Certificate of Calibration
NEWPosiTector® UTGUltrasonic Thickness Gage
Ideal for measuring wall thickness and the effects of corrosion or erosion on tanks, pipes or anystructure where access is limited to one side.
FAX: 315-393-8471 • Email: [email protected]
1-800-448-3835 or www.defelsko.com
CIRCLE NO. 106 ON READER REPLY CARD CIRCLE NO. 107 ON READER REPLY CARD CIRCLE NO. 108 ON READER REPLY CARD
cien june 09 pg 08.indd 8 02/06/09 11:46 AM
G3-AD-CIEN 1 6/1/09 11:11:57 AM
www.cienmagazine.com june 2009 9focus on ... test & measurement
Toshiba GE Turbine Components (TGTC) has reduced the time re-quired to inspect and measure steam
turbine blades from 280 minutes to 45 minutes by using the MAXOS non-contact measurement system from Steintek GmbH and their distributor NVision Inc. The co-ordinate measuring machine (CMM) used in the past to inspect the blades was not only slow but was unable to access hard-to-reach areas such as dovetail hooks and fillets. The MAXOS uses five axes to reach every point on the blades and also gener-ates specific and accurate measurements of critical areas. Resulting measurements are reported instantly and the need for addi-tional manual inspection is limited.
“The MAXOS optical scanner provides the best possible accuracy, eliminates the need for matt coating, and integrates eas-ily with our engineering and production processes,” said Tomio Kubota, President of TGTC. “Our trials also demonstrated that MAXOS is significantly faster than the other systems that we considered. The expertise and professionalism that were evident during this trial gave us the confidence to adopt this new technology.” TGCT is a joint venture that combines the production expertise of Toshiba and General Electric to produce large blades ranging from 660 to 1320mm for steam turbines at cutting-edge manufacturing facilities. The company’s annual produc-tion of blades is sufficient to generate the equivalent of eight to ten gigawatts of electricity.
In the past, it took longer to inspect blades than it took to make them. A tur-bine bucket is comprised of an airfoil and a root. The long blades have mid-span geometry that provides support for the midsection of the airfoil.
The complex geometry of these blades means that many cross-sections must be examined. The conventional 3-D CMM used in the past to inspect the blades was unable to reach many points on the root. Also many fillet radii are inaccessible to the CMM or too small to be measured by touch probe ball.
The MAXOS uses a proprietary non-contact probe consisting of a concentrated light that collects individual points at a rate of 100 per second, many times faster than a CMM. Unlike laser or white light fringe scanners, the MAXOS can inspect turbine blades without having to apply a matt coating that introduces dimensional inaccuracy. The MAXOS provides ac-curacy of +/-0.0004” and a resolution between measured points down to 0.0002” on this project. The system can be pro-vided with a resolution as low as 0.0001”. The MAXOS software is configured with an overall best fit of the measured geom-etry to allow a part with some error to fit within the overall tolerance envelope of the reference data. Win3DS Blade inspec-tion software is configured to give fast results and different kind of evaluations on mid-span, fillets, gaps and airfoils. Different best fits are available, including Gauss and Chebyshev.
In this application, the MAXOS was configured with a 5-axis horizontal arm with three linear axes and two rotary axes. One rotary axis is for the sensor and the other for positioning the blade. The rotary axes are servo-controlled and are not indexed. This configuration makes it possible to measure every part of the blade even when it is mounted vertically. Vertical mounting is preferred for the long blades because it prevents them from bending under their own weight. The MAXOS does not require highly accurate fixturing of the blade because it scans the roots as an alignment procedure.NVision
CIRCLE NO. 40 ON READER REPLY [email protected], www.nvision3d.com
NON-CONTACT MEASUREMENTenables turbine manufacturer to reduce inspection time 83%
The MAXOS non-contact measure-ment system from Steintek GmbH and their distributor NVision Inc.
CIRCLE NO. 109 ON READER REPLY CARD
cien june 09 pg 09.indd 9 02/06/09 11:46 AM
10 june 2009 www.cienmagazine.com
SIGNAL CONDITIONER BOARDSThe Mini Tilt Sensor Signal Conditioner Boards are capable of driving one or two electrolytic tilt sensors and can be inte-grated into a wide range of OEM equip-ment/systems in production applications. The boards can be operated with up to two external sensors, and can also be or-dered with a built-in wide range, dual axis tilt sensor. Each mini signal conditioner has a built-in temperature sensor, and they can be configured for single axis, dual axis (x and y in the same sensor), or two single axis modes (x and y with two separate sensors).The Fredericks Company
CIRCLE NO. 46 ON READER REPLY [email protected]; www.frederickscom.com
PRESSURE MEASURING TERMINALSThe KM37xx pressure measuring termin-als are designed to record differential and absolute pressures. Pressure measure-ment is carried out using a “standard” Beckhoff Bus Terminal with a width of only 24mm. The pressure measuring ter-minals change the measured pressure into an electrical signal. This 16-bit value is available to the higher level controller and can be transmitted by over a dozen fieldbuses. The pressure measuring ter-minals have quick release mechanisms for connecting the measuring hoses. In addi-tion to measuring, the Bus Terminals also execute other functions such as temper-ature compensation and avoidance of long-term drift.Beckhoff Automation
CIRCLE NO. 47 ON READER REPLY [email protected], www.beckhoffautomation.com
POSITION SENSORSThis line of 20 mA, spring-loaded DC.LVDT position sensors has been designed for position monitoring, feedback, and di-mensional gaging applications. The series offers a two-wire, loop powered 4-20 mA operation commonly used with current-operated process controllers and record-ers. Built-in loop-powered electronics re-sult in a position sensor that operates from a DC input and generates a precalibrated DC output that interfaces with many PLCs, digital indicators, A/D converters, computer-based data processors, and QC data collection systems. Operating over a wide range of loop supply voltages and with loop resistances up to 800 ohms, GHSI 750 Series position sensors are ideal for use in machine tool inspection and sta-tistical quality control information.Macro Sensors
CIRCLE NO. 48 ON READER REPLY [email protected], www.macrosensors.com
FLOW METERThe Steel-Mass™ Model 640S Immer-sible Thermal Mass Flow Meter is avail-able with a self-cleaning purge port field proven to remove even the toughest caked-on dust deposits on the meter. The self-cleaning unit is designed for the most demanding industrial gas mass flow meas-urement applications. Constructed of heavy-duty 316 stainless steel wetted ma-terials, Model 640S is designed for very dirty flows where residue buildup can occur over time on the sensors causing reduced accuracy. Sierra Instruments
CIRCLE NO. 49 ON READER REPLY [email protected], www.sierrainstruments.com
PADDLE WHEEL FLOW METERThe new multi-parameter paddle wheel flow meter is designed for measuring very low liquid flow rates and for highly accur-ate temperature readings. Simple in de-sign with only one moving part, these units are easy to install and operate. Sap-phire jewel bearings facilitate virtually friction-free impeller wheel rotations re-sulting in low flow metering. Models con-structed of polypropylene or chemically resistant PVDF can be mounted either horizontally or vertically.Aalborg
CIRCLE NO. 41 ON READER REPLY [email protected], www.aalborg.com
HEAT STRESS MONITORThe Microtherm® heat stress monitor displays in real-time the Wet Bulb Globe Temperature (WBGT) index which is the internationally recognized method of cal-culating heat stress. The WBGT data collected is then compared to reference values as defined by the ISO 7243 stan-dard. Appropriate “work rest” regimes can be adopted in the work place or med-ical assistance undertaken. In the event WBGT levels reach dangerous levels, the Microtherm will alert the technician with audible and visual alarms.Casella USA
CIRCLE NO. 42 ON READER REPLY [email protected], www.casellausa.com
CONDUCTIVITY STANDARDSTraceable® One-Shot™single use Con-ductivity Standards calibrate all conduc-tivity meters and probes for maximum accuracy. Calibration is made in the stan-dard’s vial. Container fits all probes. Each container is supplied with step-by-step calibration instructions, individual tem-perature compensation chart, traceability information and certificate.Control Company
CIRCLE NO. 43 ON READER REPLY [email protected], www.control3.com
GROUND RESISTANCE TESTERThe AEMC 6470 Ground Resistance Test-er now offers 4-pole Fall-of-Potential meas-urement for very low resistance measure-ments with manual/automatic fre quency selection and automatic lead compensation. It also includes FREE DataView® software for data storage, real-time display, analysis, report generation and system configura-tion. Applications include: 3-Point meas-urements of resistance to ground on ground rods and grids; 4-Point tests of soil resistiv-ity measurements; Touch and Step poten-tial testing measurements; 2- or 4-Wire tests for continuity tests on bonding or on grounding systems.Duncan Instruments Canada Ltd.
CIRCLE NO. 44 ON READER REPLY [email protected], www.duncaninstr.com
AIRFLOW MEASUREMENTThe Series STRA Duct Mounted Airflow Measurement Stations are ideal for air-flow measurement in duct systems having highly turbulent conditions at the point of measurement. The Series STRA con-sists of single or multiple airflow ele-ments, factory mounted and pre-piped in a casing designed for flanged connection to the ductwork. The station also incor-porates an airflow straightening section using honeycombing having a 1/2” open-ing by 3” depth.Dwyer Instruments, Inc.CIRCLE REPLY NO. 45 ON READER REPLY [email protected], www.dwyer-inst.com
focus on ... test & measurement
CIRCLE NO. 110 ON READER REPLY CARD
Special Pricing On NewRobust Swing Clamps
16345 Westwoods Business Park Dr. • Ellisville, MO 63021(636) 386-8022 • Fax (636) 386-8034
For Tech. Support Call (800) 827-2526 • email [email protected]
ON-TIMESHIPPING
• High ClampingForce @ 5000 psiOperating Pressure
• Position MonitoringAvailable
• Double Acting
• Robust SwingMechanism ForFaster ClampingCycles
IndexableClamping Arm
Indexing of theclamping arm in
a pre-determinedposition is possible
Metal WiperOptional
Optimumswarf protection
by metallic wiper
FKM WiperStandard
Standard elementequipped with
FKM wiper
Enhanced RobustSwing Mechanism
Sturdy swing mechanism forshort clamping times
With this new swing clamp, you get the same high quality you’ve cometo expect from Carr Lane Roemheld, but at reduced pricing.
Contact Swiftsure Engineering and ask aboutCLR-1843-XXX-SCD and CLR-1844-XXX-SCD.
• • • • • • • • • • • • •• • • • • • • • • • • • • • • • • • • • • • • • •• • • • • • • • • • • • • • • • • • • • • • • • •• • • • • • • • • • • •
SWIFTSURE®
CIRCLE NO. 111 ON READER REPLY CARD
WIDEST SELECTION AVAILABLEADHESIVES/SEALANTS/COATINGS
Need an adhesive, sealant, or coating? Master Bond hasthe solution. Contact us today, and choose from ourextensive line of epoxies, silicones, polyurethanes,
anaerobics, cyanoacrylates, and UV cures. Convenientlypackaged in easy-to-use applicators, these compounds
are available for use in one or two components. Grades are available which meet NASA, UL, and USP Class VI specifications. We even offer replacements
for competitors’ discontinued products.
IMPRESSIVE.
154 Hobart St., Hackensack, NJ 07601TEL: 201-343-8983 ■ FAX: 201-343-2132
www.masterbond.com ■ [email protected]
5087 3.375x4.875.qxd:5087 3.375x4.875.qxd 5/18/09 1:03 PM Page 1
CIRCLE NO. 112 ON READER REPLY CARD
cien june 09 pg 10.indd 10 02/06/09 11:47 AM
what could you train your people to do if you had $50,000?
the yves landry foundation and the ontario Government
want to help your business reach its full potential through a new grant program called aiME (achieving innovation & Manufacturing Excellence). aiME provides up to $50,000 to any ontario manufacturer to help with skills training related to the introduction of innovative new processes or products.
we know that when we invest in ontario’s workforce, we’re investing in the future of manufacturing. if you have an innovative idea that will make your business more competitive and need assistance upgrading your employees’ skills to make your initiative a reality, we want to hear from you.
Visit yveslandryfoundation.com or call 416-620-5464 to learn more about aiME and how to apply for grant funding.
AIME INITIATIVE
Don’t wait;Grant applications are being accepteD now.
YLF_7x10_Ad_Kester_f.indd 1 5/19/2009 3:38:27 PM
focus on ... instrumentation www.cienmagazine.com june 2009 11
the NI PCIe-8361, to connect our PXI rack to a PC. The NI-PCIe-8361 features 110MB/s sustained throughput and provides a transparent link where all PXI modules appear as a PCI board within the PC itself. MAX services simplified the setup process. Our developers quickly assembled and set up the PXI system fully and took measure-ments sooner than we expected. We thought the out-of-box experience would take several days but were pleased to find that we had the system running within a few hours.
The LabVIEW SolutionThe large number of sensors combined with the wide range of possible products to test presented us with a challenge in designing an intuitive user interface for operators. We considered this carefully because this client had no other equipment in its facility that was this complex. As a production line tester, this equipment had to be robust, simple, ac-
curate, and safe to operate.To assist in the software design phase
and reduce overall programming time, our developers used the LabVIEW State Diagram Tool Kit so they could concurrently visualize program architecture and develop code. With the LabVIEW State Diagram Tool Kit, Sci-Mech developers could share machine oper-ation concepts with Sci-Mech management and the client. With this design technique, we could spot potential problems and Sci-Mech was able to improve on the original design concepts without losing any development time.
We also used NI Motion Assist to set up the initial motion profiles. This tool helped us save hours of development time and was very useful in the initial setup of our servo motors. We could safely check the accel-eration and deceleration ramp profiles and overall velocities of the automotive seat test-ing system before program implementation.
We designed this product to test two prod-
ucts independently but potentially all at the same time. This presented a challenge for our developers to produce a GUI that displayed all relevant controls and data acquisition details in a format that new operators could easily navigate and understand. The LabVIEW front panel controls, specifically the “tabs” on the main GUI, gave us easy access to all the relevant test and diagnostic information and provided pass-word-protected access to the setup parameters.
We selected a dual-core desktop PC to communicate with the NI PXI-1042 seven-slot PXI chassis. With a dual-core PC, we took full advantage of the built-in parallel-ism of LabVIEW and created a powerful ap-plication that consumed only moderate CPU resources and left plenty of overhead for the operating system and other applications that our client may choose to run.Sci-Mech Technical Services Inc.
CIRCLE NO. 50 ON READER REPLY [email protected], www.scimech.com
by Patrick Allen, John Purse, Amit Bhalla — Sci-Mech Technical Services Inc.
The Challenge
Developing a rugged load- and displacement-controlled system — that interfaces with servo motors, load
cells, and encoders and connects to Windows OS platform databases, printers, networks, remote access software, bar code printers, and bar code readers — for the online production testing of automotive seat frames.
The SolutionUsing NI LabVIEW software and NI mo-tion products combined with PXI technol-ogy to provide a cost-effective solution for production line testing that recognizes, via bar code, different products and tests them against appropriate parameters.
Our client produces automotive seat-ing components for leading automotive manufacturers. Its parts must meet the highest quality standards and be 100 percent functionally tested before shipping. In this particular case, we measured and recorded precise displacement parameters on every automobile seat part.
Our client required a timely and cost-effective solution for production line testing on several of its automotive seating products. The test needed to recognize, via bar code, different products and test them against the appropriate parameters.
This project required a test fixture that was flexible — able to test multiple product types fast — meet a predetermined cycle time comprehensive — able to test for vari-ables and attribute data, and intuitive — able to allow for inexperienced operators to use with confidence.
We, at Sci-Mech Technical Services Inc., chose LabVIEW and NI motion products combined with a desktop PC and a remote PXI rack for controls and data acquisition.
Because we had a large number of parts to test, we developed an auto-eject system that automatically removed a tested product from tooling. This streamlined workflow so that an operator could load and begin testing on a new seat frame while the previously tested frame was ready for packing. This design reduced unnecessary operator steps and significantly reduced cycle time.
Test System DesignDue to the high digital channel counts required for this project, a desktop alone could not support the required number of PCI boards so we selected an NI PXI remote chassis to perform the extensive data acquisi-tion and to communicate to the PC-based controller. We also used two NI PXI-6511 industrial digital input modules, which provided 128 bank-isolated 24 V inputs. With bank isolation, we could connect our sensors directly to save assembly time, reduce circuit complexity, and decrease cost. In addition, we used two NI PXI-6512 industrial digital I/O modules for the 128 bank-isolated digital outputs, meaning that we could connect to devices directly to the module’s breakout box without having to put every signal through an optical isolator. With so many channels, this saved us not only setup time but also panel space.
We also used an NI PXI-6220 analog input module that offers full 16-bit resolu-tion at 250 kS/s. This was ideal because our client’s specifications required very precise load measurements. We used an NI PXI-6602 counter-timer module to capture data from positional encoders, providing us with eight channels, each with a full 32-bit resolution. To control the four servo motors of the system, we used an NI-7340 four-axis motion controller. Full driver integration with the NI Measurement & Automation (MAX) configuration utility offered an interactive GUI for both setup and trouble-shooting.
Finally, we used a MXI-Express link,
AUTOMATED FUNCTION TESTINGof automotive seating components
CIRCLE NO. 113 ON READER REPLY CARD
cien june 09 pg 11.indd 11 02/06/09 11:48 AM
12 june 2009 www.cienmagazine.com focus on ... instrumentation
GAUGE SENSORThe GS-1000 linear gauge sensor was de-signed to measure dimensions, thickness, curvature, eccentricity, displacement, height, depth, flatness, variation, runout, roundness, distortion and deflection. It is also used for load and pressure inspection applications. Incorporating the linear glass scale principle, the GS-1000 per-forms highly accurate measurements to 0.0005” throughout its full 4.0 inch meas-uring range along with a fast response speed of 39.4’/second. The carbon graph-ite spindle permits heavy lateral loading or side impact force. Ono Sokki Technology Inc.
CIRCLE NO. 51 ON READER REPLY [email protected], www.onosokki.net
TOTALIZING METERSThe CoolPoint™ vortex shedding total-izing flowmeters are designed for meas-uring, monitoring, verifying and control-ling water flows in manufacturing and processing applications. The flowmeters are electronic instruments that have no moving parts to stick or coat and can pro-cess water that may contain particles. The flow totalizer enables the user to control the total amount of water in a process. The totalizer features a six-digit LED, pulse output and push-button selection for gallons per minute or liters per min-ute. The user can toggle between two totals, one running and one resettable.Universal Flow Monitors, Inc.
CIRCLE NO. 52 ON READER REPLY [email protected], www.flowmeters.com
WEIGHT CONTROLLERThe HI 4050 weight controller is now available factory installed in a stainless steel (NEMA 4x) enclosure and can be configured as a blind unit or with a key-board and display. A load cell summing board or intrinsic barrier assembly can be added to eliminate the need for a system junction box or for use in hazardous class I, II, DIV II applications. The controller comes standard with EtherNet and op-tional EtherNet/IP, DeviceNet, Allen-Bradley Remote I/O, Profibus or Modbus TCP/IP networks. It includes WAVER-SAVER® to eliminate the effects of sur-rounding vibration for fast, stable weight display, C2® electronic calibration with-out test weights.Hardy Instruments
CIRCLE NO. 53 ON READER REPLY [email protected], www.hardyinstruments.com
HYGROMETERThe S8000 Integrale chilled mirror hy-grometer is able to handle sample gas at pressures up to 250 psig. This results in a reduced response which can save users time in dry applications - such as com-pressed air and bottled gases - where low dew-points are reached. Pressurizing the sample speeds up the response time be-cause the gas will have a higher dew point than the sample at atmospheric pressure. With the higher dew point under pres-sure, the S8000 is able to reach the tem-perature and stabilize much faster than with the lower atmospheric dew point.Mitchell Instruments Inc.
CIRCLE NO. 54 ON READER REPLY [email protected], www.mitchell.com
STEERING MEASUREMENTThis new sensor system allows vehicle manufacturers to accurately measure the effects of drift pull caused by steering wheel and tire alignment errors. Oper-ators can quickly measure and record drift-pull torque and angle and determine whether the vehicle has been properly aligned after production. The system fea-tures an integrated torque and angle measurement and a quick clamp attach-ment to the vehicle’s steering wheel. Your laptop computer supplies the power and software interface through a USB cable.Sensor Developments Inc.
CIRCLE NO. 55 ON READER REPLY [email protected], www.sendev.com
PRESSURE TRANSMITTERThe P611 pressure transmitter features a single piece 316L stainless steel sensing element with a high output silicon glass fused strain gauge, coupled with a thick diaphragm. This combination maximizes cycle life even in the presence of pressure spikes, vibration, and aggressive fluid media. The robust sensor is welded to a 316 stainless steel body and includes no O-rings or seals. The stepped design of the pressure chamber minimizes any ef-fect on the sensor caused by tightening during installation. The P611 meets the needs of a broad range of applications. Tel-Tru Manufacturing Company
CIRCLE NO. 56 ON READER REPLY [email protected], www.teltru.com
LEVEL TRANSMITTERThe Model 675 submersible level trans-mitter is designed specifically for slurries and highly viscous environments where clogging of the sensor is possible. It uses a 3.5-inch flush diaphragm within a stain-less steel shark cage to prevent unwanted clogging of the sensor area. The large diaphragm ensures continuous operation in tough, demanding and dirty applica-tions. Applications include lift stations, sewage level measurement, slurries, storm runoffs and pump control.AMETEK PMT Products
CIRCLE NO. 57 ON READER REPLY [email protected], www.ametekpmt.com
LIQUID LEVEL SWITCHESThe OLT liquid level switches are de-signed for optical point level detection. These sensors feature very high chemical resistance due to their TROGAMID® miniature plastic housing which makes them suitable for a wide range of indus-trial OEM and medical applications. The OLT series can be used with many liquids which are not compatible with conven-tional polysulphone housings such as fuel, halogenated hydrocarbons, methanol, acetone and ethyl acetate. The optical OLT switches use solid state technology with no moving parts to measure accur-ately and reliably the presence or absence of liquid in tanks, reservoirs and pipes.Sensortechnics, Inc.
CIRCLE NO. 58 ON READER REPLY [email protected], www.sensortechnics.com
Need accurate, up-to-datepower transmissionsuppliers & service
Need accurate, up to datepower transmissionsuppliers & service
contact information?contact information?CALL US TODAY
(416) 510-6799 or 1-888-542-4321We’ll put you in touch withthe right people!
CALL US TODAY
(416) 510-6799 or 1-888-542-4321We’ll put you in touch withthe right people!
(Also Available - accuratecontact & business
information on equipmentmanufacturers, distributors,
wholesalers and agents,transportation, and much
more.)
CIRCLE NO. 114 ON READER REPLY CARD
Eriez’ offers the widest selection of compact permanent liftmagnets. SafeHold® is available in four different styles to meet anyprice or performance requirement with capacities up to 10,000 lbs.
Eriez’ SafeHold® Lift MagnetsSafeHoldSelectionGuide!
Call 888-300-3743 or visit www.eriez.com
NEW
1987 SafeHoldAd-CIEN709:layout 5/29/09 1:30 PM Page 1
cien june 09 pg 12.indd 12 02/06/09 11:48 AM
www.cienmagazine.com june 2009 13Industrial Literature ReviewsHIGH PRECISION TIMING BELTS WITH
BACK COVERSBRECOflex, the pioneer and world leader in the polyurethane timing belt industry, offers high preci-sion timing belts with a wide variety of backings. Belt backings are adhered to the belt through a heated chemical bonding process to assure a strong seal to the belt. All back-ings are manufactured
to provide excellent wear resistance and resilience. www.brecoflex.comBRECOflexFREE CATALOGUE CIRCLE NO. 93
PRESSURE WASH AND SPRAY HOSE REEL CATALOGUEHannay introduces an all-new catalogue featuring its line of pressure wash and spray hose reels. The full colour catalogue includes information on Hannay’s most popular reels for use in steam cleaning, washdown, general maintenance and spray operations. Also included are compact
reels for smaller, mobile steam cleaning and pressure wash units. http://go.hannay.com/PRHannay ReelsFREE CATALOGUE CIRCLE NO. 92
COXREELS CATALOGUE FOR 2009Coxreels’ full colour catalogue showcases the expanding line of Coxreels’ high quality professional grade hose, cord and cable reels. The catalogue’s new cleaner format navigates eas-ily and makes ordering options and accessor-ies for your reel a snap. Choose from a variety of mounting brackets, roller
guide options, motor speed controllers, and so much more. www.coxreels.comCoxreelsFREE CATALOGUE CIRCLE NO. 94
BLOWOFF GUIDE HELPS CUT NOISE AND AIR USEEXAIR’s “Air Nozzles and Jets Blowoff Guide” is a FREE 16-page tech-nical booklet that offers solutions to reducing compressed air cost and noise. The Blowoff Guide details OSHA require-ments for maximum allowable noise exposure and dead-ended pres-sures for use of com-
pressed air. www.exair.comEXAIR CorporationFREE CATALOGUE CIRCLE NO. 96
DUST COLLECTORS FULL LINE LITER A-TURE GUIDEThis impressive guide outlines dozens of N.R. Murphy dust collectors, installations, capacities, styles and models. A must for any reference library. N.R. Murphy Limited has been in busi-ness for 65 years and has thousands of satisfied customers. Dust collect-ors is all we do, so do it
right the first time. Just Ask the Experts. www.nrmurphy.comN.R. Murphy Ltd.FREE CATALOGUE CIRCLE NO. 95
BOKER’S FREE 2009 WASHER CATALOGUEBoker’s FREE Washer Catalogue has over 23,000 non-standard sizes avail-able with no tooling char-ges. Outside diameters of 0.080” to 5.140”, a thick range of IDs and thick-nesses, and 2,000 material variations provide millions of possibilities. Materials include low-carbon sheet steel, five types of spring steel, stainless steel, alum-
inum, brass, copper, nickel, silver and non-metallics. ISO 9001:2000 registered. www.bokers.com/cienBoker’s Inc.FREE CATALOGUE CIRCLE NO. 97
REDUCE WATER CONSUMPTIONNew handbook from Spraying Systems Co. ad-dresses how to conserve water in spray operations without compromising performance. More than two dozen easy-to-imple-ment suggestions are provided along with sev-eral case studies showing how simple changes can lead to saving millions of gallons of water per year.
www.spray.comSpraying Systems Co.FREE CATALOGUE CIRCLE NO. 98
THE EXTECH ADVANTAGEReleased in June 2009, the new 146-page General Catalogue 37 highlights the breadth and depth of Extech’s afford-able, durable and accurate test equipment. Extech now offers 15 categories including MultiMeters, Clamp-on Meters, Tachometers, Light Meters, Sound Meters as well as meters to test
Temperature, Airflow, Humidity and Water Quality. www.extech.comExtech InstrumentsFREE CATALOGUE CIRCLE NO. 99
ASCO INTRODUCES THE NEW STEAM/HOT WATER VALVESThe new high-flow, extended-life 8220 Series solenoid valves for steam and hot water applica-tions deliver flow rates up to 60% greater than competitive offerings, allowing higher through-put and productivity in original equipment manu-facturers’ products. www.ascovalve.ca
ASCOFREE CATALOGUE CIRCLE NO. 91
focus on ... instrumentation
LEVEL TRANSMITTERThe Level Plus® model MG level trans-mitter is now available in a 22,000mm length. It satisfies the demand for a digital communication interface in the liquid-level marketplace for vessels from 508mm to 22,000mm. Outputs for the model MG include Modbus, DDA, and Foundation Fieldbus. The MG transmitter features 3-in-1 measurement of the product level, interface level, and the average temper-ature from up to 12 temperature points utilizing a single process opening, elimin-ating the need for separate level and tem-perature transmitters. MTS Systems Corp.
CIRCLE NO. 59 ON READER REPLY [email protected], www.mtssensors.com
SIGNAL CONDITIONERThe Calex Model 4710 is a DIN Rail mount, self-contained DC powered mod-ule designed for load cell, strain gage, or single ended analog amplification and fil-tering. It contains a precision instrumen-tation amplifier, filtered output and a built-in excitation supply. It provides solutions for applications such as convey-or weighing systems, hoppers or tank farms. The 0 to 30MV input range makes it compatible with most strain gage based load cell or pressure transducer outputs. The built-in 10V excitation supply is ca-pable of driving a 350 ohm bridge. The filtered output of the 4710 is 0 to 10Vdc with a frequency response of DC to 10Hz. Calex Mfg. Co.
CIRCLE NO. 60 ON READER REPLY [email protected], www.calex.com
WIRELESS DATA ACQUISITIONThe DR9011 wireless transmitter pro-vides analog and contact closure data transmission to a companion DR9021 where the data is recovered. The analog data is recovered as two 4-20mA outputs and the switch data is provided by optic-ally isolated NPN transistors outputs. The analog inputs available are dual chan-nel DC voltage or currents, single chan-nel RTD, or strain gauge bridge inputs. The bridge version provides 10VDC pre-cision excitation for up to four 330 ohm bridges. For the single channel inputs, the two 4-20mA outputs are both propor-tional to the single input.Wilkerson Instrument Company, Inc.
CIRCLE NO. 61 ON READER REPLY [email protected], www.sensorad.com
COMMUNICATIONS INTERFACEThe Pilot Pro™is a new process sample conditioning system communications in-terface designed to provide a link between plant process control operations and ana-lyzer maintenance networks, who matter where the two are located. A sensor and solenoid administration module, Pilot Pro is designed to acquire, transmit, and man-age real-time sample system information via an electronic interface, facilitating crit-ical process control decision-making. The flexible communication capability on Pilot Pro allows analyzer engineers and techni-cians to receive critical sample system data (pressure, temperature, and flow) to pro-mote proactive maintenance activities and reduce system downtimes.Parker Hannifin’s Instrumentation Products Division
CIRCLE NO. 62 ON READER REPLY [email protected], www.parker.com/pilotpro
cien june 09 pg 13.indd 13 02/06/09 11:49 AM
14 june 2009 www.cienmagazine.com
HANDHELD COMPUTERThe DataMONITOR handheld computer is designed for field interrogation and con-figuration of the waterMONITOR line of KPSI transducers. It is compact, light-weight, robust personal digital assistant (PDA) designed for outdoor use by engin-eers, scientists and field service personnel utilizing waterMONITOR submersible data logging level transducers to precisely monitor environmental water resources. Waterproof and dust resistant, the data-MONITOR holds an IP67 rating. Pressure Systems
CIRCLE NO. 65 ON READER REPLY [email protected], www.PressureSystems.com
DEW POINT ANALYZERThe S8000 Integrale Chilled Mirror Dew Point Analyzer is a complete new design from the optics through to the styled housing. Its offers a wider measurement range, major improvements in the re-sponse speed, a frost assurance system, easy mirror cleaning, intuitive menu sys-tem, multiple language display and an ap-pealing, styled, distinctive housing. The instrument requires no external utilities to achieve a -85°F/-65°C dew point even with an ambient temperature of 104°/ 40°C. The Frost Assurance System Tech-nology can be selected and adds precision by forcing the moisture to form frost below the freezing point of water.Mitchell Instruments
CIRCLE NO. 66 ON READER REPLY CARD
INSTRUMENT PLATFORMThe Series 2600A is a proven platform that combines a precision power supply, true current source, DMM, arbitrary waveform generator, V or I pulse gener-ator with measurement, electronic load, and trigger control - all in a single instru-ment. The Series incorporates a wide var-iety of measurement performance im-provements in both hardware and soft-ware that make it a powerful solution for both benchtop and multi-channel test system builders.Keithley Instruments, Inc.
CIRCLE NO. 63 ON READER REPLY [email protected], www.keithley.com
REFERENCE INSTRUMENTSThe Quartzlock E8-X series of instru-ments is a breakthrough in traceable, cali-bration-free, off-air frequency and time standards. Providing low-distortion 10MHz sine and 1PPS outputs, these ref-erence instruments maintain the high fre-quency and time accuracy required for demanding applications. A hydrogen maser is used in production testing and quality assurance to ensure compliance with offset and stability specifications. Many versions of the E8-X are available, including PCB, low-noise, very low noise and a military specification model.techniCAL
CIRCLE NO. 64 ON READER REPLY [email protected], www.technical-sys.com
focus on ... instrumentation
June 16-18, 2009 — Western
Manufacturing Technology
Show, Society of Manufacturing
Engineers, Northlands Park-
AgriCom, Edmonton, Alberta
888-322-7333; www.wmts.ca
October 19-22, 2009 —
Canadian Manufacturing
Technology Show (CMTS),
Society of Manufacturing
Engineers, Direct Energy Centre,
Toronto, ON www.cmts.ca
Event Updates
Index of AdvertisersRS# ADVERTISER PAGE #110 Air Technical Industries. . . . . . . . . . . . . . . . . . .10
106 Alan Fyfe Equipment Limited . . . . . . . . . . . . . .12
102 ASCO Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
117-121 Automation Direct . . . . . . . . . . . . . . . . . . . . . .16
115 Bird-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
111 Carr Lane . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
108 Defelsko. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
114 Eriez. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
105 Exair. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
116 Extech . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
103 Gorman-Rupp of Canada Ltd. . . . . . . . . . . . . . .5
112 Master Bond . . . . . . . . . . . . . . . . . . . . . . . . . .10
109 Numatics/Asco. . . . . . . . . . . . . . . . . . . . . . . . . .9
101 Omega . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
104 Pioneer Magnetics . . . . . . . . . . . . . . . . . . . . . . .6
107 Vac-U-Max . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
113 Yves Landry Foundation. . . . . . . . . . . . . . . . . .11
PIEZO FLEXURE ACTUATORSPI’s flexure-based piezo actuators such as the P-601 series provide large travel ranges in a low profile package, with virtually un-limited resolution and lifetime. The stiff construction allows for fast response with rise times much shorter than one millisec-ond. The design involves no friction, no lubricants and no wear. Typical applica-tions include medical instrumentation, nanotechnology, clean room micro-manu-facturing, auto focus, high throughput screening, micro-dispensing, high-speed valve control, nanoliter pumps, laser and spectrometer tuning,PI (Physik Instrumente) L.P.
CIRCLE NO. 68 ON READER REPLY [email protected], www.pi-usa.us
ANALYZERThe PAC CHECK® Model 650 EC benchtop dual oxygen and carbon dioxide headspace analyzer is ideally suited for applications in which CO2 gas is used to minimize microbial activity or enhance products to meet shelf life objectives. Its simplified menu structure lets users go from “set-up to test” in less than a min-ute, making it extremely fast and easy to operate. It can measure both O2 and CO2 concentration ranges from 0 to 100% in rigid, semi-rigid and flexible packages. The analyzer allows both automatic and manual gas sampling.Mocon, Inc.
CIRCLE NO. 69 ON READER REPLY [email protected], www.mocon.com
SINGLE BOARD COMPUTERThe 6U CompactPCI single board com-puter (SBC) combines Intel’s multicore technology with a flexible mezzanine card extension and rugged design for indus-trial applications. The new, scalable D9 can be equipped with the Intel® Core™2 Duo, Core™ Duo or Celeron® M pro-cessors to support a multitude of dual-core and single-core CPUs depending on specific application requirements. The board is suitable for a wide range of ap-plications including monitoring, visualiz-ation, control and test and measurement throughout the industrial automation markets.MEN Micro Inc.
CIRCLE NO. 67 ON READER REPLY [email protected], www.menmicro.com
CIRCLE NO. 115 ON READER REPLY CARD
INDUSTRIAL WORKBENCHESLista’s enhanced Industrial Workbenches are part of a fully integrated modular system for storage and workspace. Because of their modular design, they can be easily config-ured to suit specific needs without cus-tom cost. The workbenches are available with a choice of sturdy, long lasting work surfaces, such as butcher block, pressed wood, and galvanized steel, for different applications. To further customize work-benches, the Lista Nexus System can support a wide range of shelves, parts bins, lights and electrical accessories. The workbenches are also available with a selection of above-worksurface shelves and overhead cabinets. Lista drawer stor-age cabinets can serve as pedestals for the workstations. Cabinet pedestals are avail-able in a variety of widths.Lista International Corporation
CIRCLE NO. 70 ON READER REPLY [email protected], www.listaintl.com
cien june 09 pg 14.indd 14 03/06/09 10:46 AM
CIRCLE NO. 116 ON READER REPLY CARD
1-800-613-0507 x 24
cien june 09 pg 15.indd 15 03/06/09 2:22 PM
Convert, isolate and transmit yourprocess signals, starting at $89
• DC selectable model with 3-way isolation for $119offers multiple input/output ranges
• 4-20mA isolated signal conditioner for $89• Thermocouple/mV isolated model for $119• RTD Input signal conditioner for $119
www.automationdirect.com/signal_conditioners
Switches and transmitters sense up to 2,000A, starting at $63
• Output options include 4-20mA or 0-10 VDC• Solid or split-core models for easy retrofit• Panel-mount or DIN rail adapter available for
easy installation• 5-year warranty
www.automationdirect.com/current-sensors
• 1/32, 1/16, 1/8 and 1/4 DIN sizes, all with dual4-digit, 7-segment display
• Universal inputs support 18 signal types • Built-in auto-tuning• FREE configuration and monitoring software
(download online)
www.automationdirect.com/pressure-sensors www.automationdirect.com/process-controllers
PSD25 PRESSURESWITCHES• Available in 145, 1450
and 5800 psi ranges• Vibration and shock-resistant• All models $89.00
PTD25 PRESSURE TRANSMITTERS• Available in 15, 30, 100, 500, 1,000 and 3,000 psi
ranges, or 0 to 100 inches water column, with4-20 mA or 0-10V output options
• All models $125.00
22 models available,starting at $89
For complete information or to order our free catalog, visit: www.automationdirect.com/temperature-sensors
1-800-633-0405
www.automationdirect.com
CURRENT SENSORS
ProSense electronicpressure and vacuumsensors are asolid-state solutionto problems withmechanicalswitches
PRESSURE/VACUUM SENSORS SOLO PROCESS CONTROLLERSSIGNAL CONDITIONERS
Our shipping policies make it easier than ever to order direct from the U.S.!Free standard ground shipping is availablefor orders totaling over $300 U.S. (exceptfor items which require LTL shipping, seeWeb site for details). Also, save onbrokerage fees when -shipping standardground to Canada - you can choose toallow AutomationDirect to nominate abroker for your shipment for parts shippingvia standard ground. This can save you bigon brokerage fees. See Web site fordetails and restrictions -
www.automationdirect.com/canada
The new ProSensetemperature sensors giveyou reliable processmeasurement at great directprices. These high-qualityswitches, transmitters, RTDprobes and thermowells are instock and ready to ship thesame day (when ordered by 6 pm E.T. with credit card or pre-approved credit).
TSD25 Series Temperature Switches• Compact temperature switch with simple setup
using mechanical adjustment dials• Temperature setting range: -4 to 284F (-20 to 140C)• Extremely durable housing with 316 stainless steel
wetted parts• LEDs indicate power and function status• Two DC switching outputs• cULus, CE, RoHS
TTD25 Series Temperature Transmitters• High-accuracy 2-wire temperature transmitter• 1000 ohm, Class A platinum RTD sensing element• 4-20mA analog output signal• Probes made of durable 316 stainless steel• Temperature ranges of 0-100°C or 0-300°F• cULus, CE, RoHS• Available in two form factors
RTD probes• 4-wire, 100 ohm platinum RTD sensing element• 10mm diameter probe made of durable 316 stainless steel• Measuring temperature range of -40 to 302°F
(-40 to 150°C)• Probe lengths of 160mm, 260mm, 360mm, and 560mm• 4-pin M12 plug• cULus, CE, RoHS
Thermowells• Thermowells for ProSense 10mm diameter RTD probes• All wetted parts are 316 stainless steel• 600°F (315°C) temperature and 232 psi (16 bar)
pressure rating
0906-CIEN-SensorsTemp-TAB:sensors 4/30/2009 9:30 AM Page 1
CIRCLE NO. 121 ON READER REPLY CARD
CIRCLE NO. 117 ON READER REPLY CARD
CIRCLE NO. 118 ON READER REPLY CARD CIRCLE NO. 119 ON READER REPLY CARD CIRCLE NO. 120 ON READER REPLY CARD
cien june 09 pg 16.indd 16 03/06/09 10:47 AM
To receive FREE information circle the numbers on the card below thatcorrespond to the number found on the products/services that interest you.
Print out and fax/mail this card TODAY! For faster service fax to (416) 510-6875.
Please provide your e-mail address to receive the CIEN Newsletter full of Industry and Product News. CIEN will also update your subscription via e-mail.
READER REPLY CARDE-Mail Address__________________________________________________________________
Name__________________________________ Title____________________________________
Company_______________________________________________________________________
Address ________________________________________________________________________
City _____________________________ Province ______ Postal Code ____________________
Telephone #: ( ) ___________________ Fax #: ( )__________________________
# of employees at this location: nn 1-9 nn 10-19 nn 20-49 nn 50-99 nn 100-249 nn 250-499 nn 500-999 nn 1000+
Info wanted for: nn Immediate purchase nn Future purchase nn Reference nn Please have salesperson call me
Please sign here if you wish to receive Canadian Industrial Equipment News free of charge
Signature ____________________________________Date ______________________________
MAIL THIS CARD OR FAX TO (416) 510-6875 TODAY!
PLEASE SEND ME FREE INFORMATION ON THE ITEMS I HAVE CIRCLED BELOW123456789101112
131415161718192021222324
252627282930313233343536
373839404142434445464748
495051525354555657585960
616263646566676869707172
737475767778798081828384
858687888990919293949596
979899100101102103104105106107108
109110111112113114115116117118119120
121122123124125126127128129130131132
133134135136137138139140141142143144
145146147148149150151152153154155156
157158159160161162163164165166167168
169170171172173174175176177178179180
181182183184185186187188189190191192
193194195196197198199200201202203204
205206207208209210211212213214215216
217218219220221222223224225226227228
229230231232233234235236237238239240
241242243244245246247248249250251252
253254255256257258259260261262262263
2009 L K J I H G F E D C B A
MAIL OR FAX TODAY: 416-510-6875
Canadian Industrial Equipment NewsReader Enquiry Department12 Concorde Place, Suite 800Toronto, ON M3C 4J2
FREE INFORMATION!
FREE SUBSCRIPTION!!
Please indicate which of the following products you are planning topurchase in the next few months.Z nn Automation Products/SystemsG nn Motion Control ProductsW nn Sensor & ControlsT nn Software and/or PLC’sV nn Motors — Electric or GearP nn Belts & Chain DrivesB nn Fluid Power & ControlsQ nn Seals & BearingsR nn LubricantsI nn Sealants or AdhesivesU nn Test & Measuring InstrumentsO nn Maintenance Equipment/SuppliesA nn Tools — Hand or Power
C nn Health & Safety ProductsJ nn Electrical EnclosuresD nn Metalworking Tools or
MachineryM nn Process Valves, Fittings, PumpsE nn Marking/Bar Coding EquipmentF nn Fork Lift TrucksN nn Platform Lifts/Cranes/HoistsH nn Material Handling EquipmentS nn Portable Structures/PartitionsX nn Air Exchanges or Fume
ExtractorsY nn Compressed Air Equipment
My primary job function is:nn Engineeringnn Plant Operations Managementnn Purchasingnn Maintenance
nn Electrical Maintenancenn Administrationnn Other (please specify)
_____________________________
nn Agriculture, Fishing, Forestrynn Mining, Quarrying & Oil Wellnn Construction
Manufacturingnn Food Productsnn Tobacco Productsnn Textile Millsnn Finished Fabric Productsnn Lumber & Wood Productsnn Furniture & Fixturesnn Paper & Allied Productsnn Printing & Publishingnn Chemical Productsnn Petroleum Refining Productsnn Rubber & Plastic Productsnn Leather Productsnn Stone, Clay, Glass & Concretenn Primary Metal Industriesnn Fabricated Metal Productsnn Industrial & Comm. Machinerynn Electrical & Electronic Equip.nn Transportation Machinery
My company’s main business activity at this location is:nn Instruments, Photo & Medical
Goodsnn Misc. Manufacturingnn Transportation Servicesnn Communications Servicesnn Electric Power, Gas & Sanitary
Serv.nn Governmentnn Wholesale Trade (please specify
main product)_____________________________
Services/Othernn Retailnn Electrical Repair Shopsnn Welding Repairnn Armature Rewindingnn Misc. Repair Shopsnn Engineering Servicesnn Universitiesnn Other services A.E.C.
_______________________________________________________________________________________