Canadian Engravers Supply Co.

Badges Tags

Findings&

CANADIAN ENGRAVERS

SUPPLY

ALBERTAEmail: [email protected]

www.cesco.ca

ONTARIOEmail: [email protected]

www.cesco.ca

P Packaging Material 30Paint Kits 34Pet tags 13Photo Brasive LaserTape™ 32Photo I.D. Clips 9Pin & Clutch Back 9Plaque pres. boxes 30Plaque pouches 30Plastic Key Tags 19Plastic Shear 36Plates 25-27Pocket Accessories 4Poly Bags 30Pre-mask Tape 29

R Ribbon Bars 9Romark Paint Kits 34Rub’n Buff® 34

S Safety Paints 34Seklema™ Mat 32Self-locking Pins 9Shears 36Snap Clips 9Solid Brass Badges 2Stainless Steel Tags 12Standard Pins 9Straps 22Sublimatable Tags 17-18Sublimatable Key Tags 19Sublimation Tape 28Super Lube 33

T Tag Accessories 13,22Tags 13-20Tape Dispensers 28Tapes & Adhesives 28-29Tri-Flow® 33

V Valve Action Paint 33Velcro 29

# 3M™ Adhesive 28

H Heat Tape 28Heavy Duty Swivel Clips 9Holders Accessories 4

I I.D. Key Tags 21I.D. Plates 23-24Identifiers 3

J Jiffy Bags 30

K Key Tag Accessories 21Key Tags 19-20

L Lacquered Key Tags 20Lacquer Sticks 33Lanyards 22 Laserable Key Tags 20Laserable Metal Plates 26LazrCLEAN™ 31LaserFrost™ 27LASERmag® 11LaserTape™ 31Legend Plates 35LiquaMASK™ 31Luggage & Key Tags 19-20Lubricants & Oxidants 33

M Magic Peel™ 29MagMATES 11Magnets 12Magnetic Tape / Sheeting 11Magnetic Biz Cards 11Magnetic Key Cases 21Medallions 15-16Metal Disks & Plates 25-26Metal Marking Compound 12Metal Shear 36Metal Tags- Rotary 13Military Badges 3Multi-Mat™ 31

N Neck Cords 22Neck Ribbons 6NOVUS™ Acrylic Polish 31

A Acryfil Paint 34Adapters 9Adhesives 29AlumaMark™ 27Aluminum Oxidant 33Aluminum Shields 16Anodized Aluminum Tags 14AS10 Roland® Sheets 29Auxiliary Equipment 36

B Badges 2-8Badge Findings 9Badge Magnets 10Beaded Chain 22Brass Key Tags 20Brass Oxidant 33Brass Plates 23-24Business Cards - Metal 24Button Machines & Components 37-38

C Carabiners 21Carton Sealing Tape 30CerMark™ 12Chain 22Cleaners & Polishers 31Clutches 9Coils 21Corner Rounders 36Crimp Pins 9Custom Cut Plates 26

D Dies 36Disks 25

E Engravers Enamel Paint 33Engravers Lube 33Engraving Table Tape 28

F Felt Pads 29Filament Tape 30Frame Badges 5

G G.I. Tags 13-14

1

Table Of Contents

2

Colours:

Solid Brass Badges

Bad

ge

s

Badges

Bevelled Metal Badges

Colours:

Silver-BV3 Gold-BV7

Rectangle style

Oval style

Back with magnet• Edges have bevelled look. Bright gold and bright silver finishes.• Available with pin back or blank flat back.• Steel metal badge frames. (Magnetic)• Blank back allow magnets to be used.

1” x 3”

3/4” x 3”

5/8” x 2-1/2”

1/2” x 2-3/8”

3/8” x 2-1/4”

Satin Silver-334

Glossy Silver-344

Glossy Gold-714

Satin Gold-734

• Gauge: .050 Solid Brass. Available as blank, pin or clutch back.• Pin and clutch backs are electronically fastened to badge blank. • Solid brass badges are lacquer coated and have protective masking.• Use Brass Oxidant or Engraver’s Enamel to blacken letters (pg26).• Can be engraved with Non-Rotating Diamond Drag or Rotary Burnisher.

COLOUR SIZE BLANK PIN CLUTCH

Satin SilverGlossy SilverGlossy GoldSatin Gold

3/8” x 21/4”- -- -- -- -

MP1 - 334MP1 - 344MP1 - 714MP1 - 734

- -- -- -- -


1/2” x 23/8”M2 - 334M2 - 344M2 - 714M2 - 734

MP2 - 334MP2 - 344MP2 - 714MP2 - 734

MC2 - 334MC2 - 344MC2 - 714MC2 - 734


5/8” x 21/2”M3 - 334M3 - 344M3 - 714M3 - 734

MP3 - 334MP3 - 344MP3 - 714MP3 - 734

MC3 - 334MC3 - 344MC3 - 714MC3 - 734


3/4” x 3”M4 - 334M4 - 344M4 - 714M4 - 734

MP4 - 334MP4 - 344MP4 - 714MP4 - 734

MC4 - 334MC4 - 344MC4 - 714MC4 - 734


1” x 3”M5 - 334M5 - 344M5 - 714M5 - 734

MP5 - 334MP5 - 344MP5 - 714MP5 - 734

MC5 - 334MC5 - 344MC5 - 714MC5 - 734

STYLE COLOUR SIZE BLANK PIN

Oval

Gold Silver 11/2” x 2” BV7 - OV1

BV3 - OV1BV7 - P - OV1BV3 - P - OV1

Gold Silver 2” x 25/8” BV7 - OV2

BV3 - OV2BV7 - P - OV2BV3 - P - OV2

Rectangle

Gold Silver 1” x 3” BV7 - RT1

BV3 - RT1BV7 - P - RT1BV3 - P - RT1

Gold Silver 11/2” x 3” BV7 - RT3

BV3 - RT3BV7 - P - RT3BV3 - P - RT3

*Magnet sold separately.

3

BC4-512 Blue/White Clutch Back

Badges & Identifiers

Plastic Badges

Military Badges

Rowmark® Identifiers

11/8” x 23/16”

13/8” x 23/4”

13/16” x 213/16”

9/16” x 21/2”

9/16” x 29/16”

Display Board IBF-KIT

Oval

Round Corners

Thin Rectangle

• Identifiers are plastic with blank backs. (pin or clutch backs available by special order)• “Oval and Round Corner” accommodates 1/16” thick material. • “Thin Rectangle” accommodates 1/32” thick.

Pin Back Clutch Back• Minimum 50 pieces per colour • 3/32” thick plastic badges or blanks. • Custom sizes available. • Available with Pin or Blank Back. • Additional colours and sizes available in 1/16” thick. See colour charts.

STYLE COLOUR INSERT SIZE INSERT PART NO.

Round Corners

SilverGoldBlack

9/16” x 21/2” 1/16”IBF - 301IBF - 701IBF - 401

RoundCorners

SilverGoldBlack

13/16” x 213/16” 1/16”IBF - 302IBF - 702IBF - 402

RoundCorners

SilverGoldBlack

13/8” x 23/4” 1/16”or 1/8”

IBF - 303IBF - 703IBF - 403

ThinRectangle

SquareCorners

SilverGoldBlack

9/16” x 29/16” 1/16”IBF - 3RTIBF - 7RTIBF - 4RT

OvalSilverGoldBlack

11/8” x 23/16” 1/16”IBF - 3OVIBF - 7OVIBF - 4OV

Display Board IBF - KIT

BP3-734RC Brushed Gold Pin Back532NM-734RC Brushed Gold Blank Back

Metallic Badges - Round Corners 1” x 3” SURFACE CORE GAUGE PIN BACK1” x 3”

BLANK BACK1” x 3”

Brushed Silver Black 3/32” BP3 - 334-RC 532NM - 334-RCBrushed Aluminum Black 3/32” BP3 - 354-RC 532NM - 354-RC

Brushed Gold Black 3/32” BP3 - 734-RC 532NM - 734-RCEuropean Gold Black 3/32” BP3 - 754-RC 532NM - 754-RC

BP3-602 Red/White Pin Back132-602 Red/White Blank Back

Plastic Badges (Laminated) - Square Corners 1” x 3”, Bevelled Edges

SURFACE CORE GAUGE PIN BACK1” x 3”

BLANK BACK1” x 3”

White Black 3/32” BP3 - 204 132 - 204-13Black White 3/32” BP3 - 402 132 - 402-13Blue White 3/32” BP3 - 512 132 - 512-13Red White 3/32” BP3 - 602 132 - 602-13

Military Badge - Square Corners 1/2” x 2 1/2”, Bevelled Edges

SURFACE CORE GAUGE CLUTCH BACK1/2” x 2-1/2”

Black White 3/32” BC4 - 402

Blue White 3/32” BC4 - 512

BC4-402 Black/White Clutch Back

4

wire clips SIZE DESCRIPTION PART NO.

3 1/2” For frames 6”and under. 99W-350

6” For frames 8”and under. 99W-600

suction cups SIZE DESCRIPTION PART NO.

11/2” dia.

Used for removing plates from holders. SUC-000

13/4”Metal hanger for hanging

signs on windows. SUC-175

SIZE SURFACE CORE FINISH PART NO.

11/4” x 3” White BlackSatin Finish PKT - 204Matte Finish PKT - 2 - 204

11/4” x 3” Black WhiteSatin Finish PKT - 402Matte Finish PKT - 2 - 402

Pocket Accessories

Pocket Adapters

Pocket Badges

Holders Accessories

Side View

Pocket Insert

3 - 1/2”

1 - 1/4”

3”

1-1/4 x 3”Front

Dual lock SIZE DESCRIPTION PART NO.

1/2” x 12”

Dense side mounts to trough.Light side mounts to sign.

(Adhesive backed.)99D-512

plastic hanger SIZE DESCRIPTION PART NO.

31/2” long

17/8” high

21/8” wide

Clear plastic hanger mounts over the top of office partitions from

1-1/2” to 2” thick. Signs can be mounted with double-sided tape.

9P-110

v-clip & cable SIZE DESCRIPTION PART NO.

1”For mounting to T-Bar in suspended ceilings and

over double frames. 99V-000

12”Zinc-plated 1” looped-

end cables. Holds up to 25 lbs.

9CB-000

velcro® SIZE DESCRIPTION PART NO.

1” x 75 ft. roll

Hook 99H-000

Loop 99L-000

1” x 12” Strip

Hook 99H-012

Loop 99L-012(Hook and Loop)

• Used for holding signs in Designer and Premier holders.• Allows for easy removal of names using a suction cup.

1/2”

• Nylon - white. • Adhesive back.

21/8”

17/8”

31/2”

• Custom sizes are available by quotation.

• Apply to the back of Designer and Designer II frames which will be used on partitions.

900-035 1” x 3”Metal - Bright Gold900-035P 1” x 3”

with clear plastic(Minimum 50 pieces)

900-020 7/8” x 27/8”Clear Plastic Pocket Insert

Attach to badge blank900-021 21/2” x 11/2”

Slip-On Attach to badge blank

Plastic - Fold-Over Style (1/16” thick)

1/2”

• Min. 50 pieces/colour. See colour charts for additional colours. • Satin or Matte finish. • Custom sizes available - provide dimensions.

Ac

ce

ssorie

s

900-007 1” x 11/4” Pin-Pocket Clip Combo

(2pcs)

5

Frame Badges

1/4” x 2-1/2”

1/2” x 2-1/2

Double Frame Badge

• Available as blank only.• Accepts 1/32 thick inserts.• Bright Gold only.

Round Metal Frame Badges (Non-Magnetic)

R3-7001-3/8” x 2-3/4”

R2-70015/16” x 2-15/16”

Colours:

Silver-300 Gold-700

Colours:

Silver-300 Gold-700

R1-7005/8” x 2-5/8”

• Available as blank, pin or clutch back. Gold and silver finishes.• Accepts inserts, 1/32” thick. • Non-magnetic metal badge frame.

11/16”Insert 19/16” x 23/8”

Insert

* By special order: Minimum 50 pieces.

Metal Frame Badges (Magnetic)

MS-L-30013/8” x 23/4”

• Available as blank, pin or clutch back. • Gold and silver finishes.• Accepts inserts, 1/32” thick.• Magnetic metal badge frame.

1” x 3” MS-13-300

MS-3001/2” x 21/2”

COLOUR INSERT SIZES PART NO.

BrightGold

Top - 1/2 x 21/2 Bottom - 1/4 x 21/2

MDF - 700

COLOUR INSERT SIZE BLANK PIN CLUTCH

Silver Gold 5/8” x 25/8”

R1 - 300R1 - 700

RP1 - 300RP1 - 700

- -- -

Silver Gold 15/16” x 215/16”

R2 - 300R2 - 700

RP2 - 300RP2 - 700

- -RC2 - 700

Silver Gold 13/8” x 23/4”

R3 - 300R3 - 700

RP3 - 300RP3 - 700

- -RC3 - 700

COLOUR INSERT SIZE BLANK PIN CLUTCHSilver Gold 1/2” x 21/2” MS - 300

MG - 700MPS - 300MPG - 700 MCS - 300

Silver Gold 1” x 3” MS - 13 - 300

MG - 13 - 700MPS - 13 - 300MPG - 13 - 700

MCS - 13 - 300MCG - 13 - 700

Silver Gold 13/8” x 23/4” MS - L - 300

MG - L - 700MPS - L - 300*MPG - L - 700*

MCS - L - 300*MCG - L - 700*

Silver Gold 11/16” dia. MS - 116

MG - 116MPS - 116MPG - 116 - -

Silver Gold 19/16” x 23/8” MS - OVL

MG - OVL - - - -

6

lanyarD slotteD tag2” x 31/4”, 1/2” slot

FR2-LANV-TAG FR2-LAN-TAG

Sublimatable FR Plastic

Sublimatable Badges

Sublimatable Luggage/Sports Tags - FR Plasticsublimatable luggage & sport tags, 2-sided, 3/32”, 50 per case, gloss white

FR2-GLF4” dia.

FR2-DIA-LUG31/2” x 31/2”

FR2-MEG-LUG2.67” x 4”

FR2-FTB4”x 23/4”

FR2-SQ-LUG31/2” x 31/2”

baDges, 3/32” thick

baDge inserts3/32” thick, 1.43” x 2.8”

FR-ID-1 Gloss Finish 5621 FRM-ID-1 Matte Finish 5628

lapel buttonwith pin, 3/32” thick, 21/2” dia.

FR-BTN-250

Sublimatable Badges - FR Plastic

FR-OVL Gloss 11/2” x 3” 5532FRM-OVL Matte 11/2” x 3” 5533

FR-230 Gloss 2” x 3” 5530FRM-230 Matte 2” x 3” 5531

*Images for illustration purposes only

56545507 5897 5993 ASST.

*straps sold separately (see page 22) *Image for illustration purposes only

5649

5665

Bad

ge

s

*Jig available in CESCO Sublimation CataloguePart No. JIG-5941-BDL

FR-100 Gloss 1” x 3” 5501FRM-100 Matte 1” x 3” 5515

FR-125 Gloss 11/4” x 3” 5502FRM-125 Matte 11/4” x 3” 5516

FR-150 Gloss 11/2” x 3” 5786

FR2-REC-LUGFR2-BRF-TAGFR2-TAGFR2-LUG

5655555655055503

21/2” x 41/4” 13/4 x 3” 3” x 51/2”23/4” x 4”

7

Sublimatable Badges - Metal

LSS15-200-RC13

1" x 3"

• Specially prepared white sublimatable coating over gold-plated steel.• Lasers to a bright gold finish. • Perfect fusion of laser and sublimation processes.

• Available in Satin Gold or Satin Silver.• Bright reveal edge border. • Etched brass look.

1" x 3"11/2” x 3”

111/16” x 29/16”

white LaserSUB™ Steel Badges

2-Tone Etched Brass Badges

window Style Badge

• Includes adhesive backed plastic pocket, which holds replaceable name plates

LSS15-200-OVL

LSS15-200-RC15

AS25-734-W23

11/2” x 3”

2” x 3”

111/16” x 29/16”

Finish Aluminum Brass

White AS25-200-W23

Satin Silver AS25-354-W23

Satin Gold AS25-734-W23 BS20-734-W23

COLOUR SIZE GAUGE PART NO.

Satin GoldSatin Silver 1” x 3” 0.020” BS25-77-RC

BS20-37-RCSatin GoldSatin Silver 11/2” x 3” 0.020” BS25-77-RC15

BS20-37-RC15Satin GoldSatin Silver 111/16” x 29/16” 0.020” BS25-77-OVL

BS20-37-OVL


White 1” x 3” 0.015” LSS15-200-RC13

White 11/2” x 3” 0.015” LSS15-200-RC15

White 111/16” x 29/16” 0.015” LSS15-200-OVL

8

15/16” x 215/16”

Sublimatable Badges - Metal

White

Satin Silver

Satin Gold

Sublimatable Aluminum

UNISUB® Aluminum

Badge Inserts

Satin Gold

Sublimatable Brass


WhiteSatin SilverSatin Gold

1” x 3” .025” AS25-200-RC AS25-354-RC AS25-734-RC


7/8” x 23/4” .025” AS25-200-RC78 AS25-354-RC78 AS25-734-RC78


11/2” x 3” .025” AS25-200-RC15 AS25-354-RC15 AS25-734-RC15

SIZE GAUGE PART NO. UNISUB®

Part No.

11/2” x 3” .030” AS30-200-125 5735

2” x 3” .030” AS30-200-230 5736

2” x 31/2” .030” AS30-200-CRR 5733

21/8” x 33/8” .030” AS30-200-218 5749

SIZE GAUGE PART NO.

1” x 3” .020” BS20-734-RC

7/8” x 23/4” .020” BS20-734-RC78

11/2” x 3” .020” BS20-734-RC15


Satin Gold BrassWhite Aluminum 1/2” x 21/2” .020”

BS20-734-BF12 AS25-200-BF12

Satin Gold BrassWhite Aluminum 5/16” x 215/16” .020”

BS20-734-BF13 AS25-200-BF13

Satin Gold BrassWhite Aluminum 11/16 dia. .020”

BS20-734-D16 AS25-200-D16 • Available in Satin Gold Brass and White Aluminum

• Rounded corners

• White aluminum, 1-sided.• 3/16 rounded corners

1/2” x 21/2” 11/16”

Bad

ge

s

9

900-013L 1/2” x 31/2”

900-013 1/2” x 23/4”

Standard Pins Pin & Clutch Back

Pin on Disk

Self-Locking Pins

Bulldog Clips

Snap Clips Adaptors

Photo ID Clips Ribbon Bars

Heavy Duty Swivel Clips

Crimp Pins

900-006AAdhesive Backed

Clutch Badge Clips

900-060 11/2” Plastic Backed

900-005Plastic Backed

900-006Plastic Backed

900-012Swivel Plastic Backed

900-014Large Plastic Backed

900-019Swivel Plastic Backed

900-028 1” Plastic Backed


900-023 11/2” Adhesive Backed

900-023P 11/2” No adhesive backing




900-003 2” Clear Plastic

900-003A 2” Adhesive Back

Badge Findings

900-3BL

Ballou Clutch

900-003B

Brass Clutch

900-003C

Nickel Clutch

900-004

Tack and Clutch Set

900-023S 11/2” Square Corner Base Adhesive Backed

900-016 Pin-Clip Adaptor

900-007 1” x 11/4” Pin-Pocket Clip Combo

(2pcs)

900-015 3/4” Mini-Pocket Adaptor

Plastic Backed

900-008 11/2” Serrated pin for use with

fusing machine

900-009 2” Serrated clutch bar for use

with fusing machine

CLIP-100 Clear

CLIP-200 White

*Clips available individually.

Stick Pins

900-048 900-048A

w/adhesive for partitions

10

Badge Magnets

Magna Lite

Steel / Adhesive

900-40SA 9/16” x 13/8”Steel/Adhesive Set

(sold in multiples of 5)

900-40S-O 9/16” x 13/8”Steel Plate only

used with 900-40B or 900-50B magnets

Steel Plate

900-40A 7/16” x 13/8”Adhesive only


Adhesive Strip

900-401 9/16” x 13/8”

Super Magnet / Steel Set

900-40B 9/16” x 13/8”Magnet only (sold individually)

Super Magnet

900-500 1/2” x 15/8”

Ultimate Magnet Set

900-501 1/2” x 15/8”

Ultimate Magnet / Steel Set

900-50B 1/2” x 15/8”Magnet only (sold individually)

Ultimate Magnet

Magna Badge

900-751 1/2” x 13/4”

Magnet/Steel w/ adhesive

Sold in sets only.

Magna

Super Magnet

Ultimate Magnet

Steel / Adhesive

900-400 9/16” x 13/8”

Super Magnet SetMagnets/Adhesive Set(sold in multiples of 5)

Magnets/Adhesive Set(sold in multiples of 5)

900-410 9/16” x 13/8”Magnet/Magna-clip set w/adhesive


Magna Clip Set

900-41S 9/16” x 13/8”Magna-clip fitted plate only,

adhesive backed For 900-40B magnet

Magna Clip

• Clothing friendly solution for attaching name badges. • Magnet can be used alone to securely hold to steel name badges.

Features:

Posi Grip Set

900-7PG 5/8” x 13/8”Magnet/Lock-in Feature

w/adhesive Sold in sets only.

Magna Disc

900-7DK 5/8” dia.

900-7LT 1/2” x 13/4”

Magna Mini

900-7MN 1/2” x 11/4”

Ma

gn

ets

11

Magnetic Tape / Sheeting

Magnetic Sheeting (.032)

• Magnetic sheeting sticks to metal. • White face is great for vinyl lettering, or can be screenprinted.

Magnetic Biz-Cards (.032)

• Adhesive backed magnetic cards.• Ready to peel and stick to the back of standard business cards.

MagMATES (Sublimatable)

LASERmag® (Laserable)

• magMATES cannot be laser engraved. • 10 cards / sheet, 10 sheets / pkg. Sold in pkg only.

Magnetic Tape Magnetic Strips

• 12” x 24” sheets, .020”• Create your own shapes, promotional Magnets, Vehicle Graphics, etc.• Brushed Yellow Gold/Black is not UV stable.• Not recommended for Rotary Engraving.

F Front Engrave

OutdoorUse

Laser Engrave

Indoor Use

Size Colour Part No.

12” x 24”

Brushed Silver SUB-MM63-S12

Brushed Gold SUB-MM64-S12

Chrome SUB-MM73-S12

Brite Gold SUB-MM74-S12

Size Type Part No. 12” x 24” sheet

Adhesive backed 9MS-124

24” x 50 ft. roll 9MS-024

12” x 24” sheet White face(non-adhesive)

9MS-124W

24” x 50 ft. roll 9MS-024W

Colour Brushed Silver/Black Brushed Yellow Gold/Black Gloss Black/Gold

Part No. LMG63-S12 LMG64-S12 LMG65-S12

Size 12” x 24” Sheets 12” x 24” Sheets 12” x 24” Sheets

UV Stable Yes No Yes

Size Colour Part No.

2” x 31/2”

Brushed Silver SUB-MM63-235

Brushed Gold SUB-MM64-235

Chrome SUB-MM73-235

Brite Gold SUB-MM74-235

• Peel and Stick. • Premium Adhesive backing.

Size Thickness Part No.

1/2” x 100 ft. roll.

1/16”

99M-050

1” x 100 ft. roll. 99M-010

1/2” x 12” long 99M-050-F

1” x 12” long 99M-010-F

Size Quantity/pkg Part No.

2” x 31/2” (100/pkg.) 999-BIZ

Size Thickness Part No.1” x 12” strips* 1/8” BBMAG-12

*Kiss Cut to 1” x 1”

Sheets (.015”) Business Cards (100 /pkg.)

12

Stainless Steel Tags

ID-HEXHexagon

1” x 1” x 1/16”

ID-HRTHeart

7/8” x 3/4” x 1/16”

ID-OE 7/16” x 13/4” x 1/16”

ID-CHN

ID-SRE 1/2” x 2” x 1/16”

GI-SS3/4” x 11/4” x 1/32” GIL-SS

11/8” x 2” x 1/32”999-032-D

Circle13/8” dia. x 1/32”

999-032-DBDog bone

1” x 15/8” x 1/32”

• Not directly laserable. Must use Cerdec™ to mark with CO2 laser

SSU2-334-118H5/32” holes

SSU2-334-D2H5/32” hole

SSU2-334-D15H 5/32” hole

SSU2-334-OVLH 5/32” holes

SSU2-304-D15H1/8” hole

SSU2-304-125H

1/4” round corners

3/16” round corners 1/8” holesSSU2-334-13 without holes

SSU2-334-13H 3/32” holes

1/8” round corners

1” x 3”

3/16” round cornersSSU2-334-150 without holesSSU2-334-150H 3/32” holes

11/2” x 3”

11/8” x 25/8”

11/2” dia.

13/8” x 21/8” 2” dia.

11/4” x 3”

11/4” x 21/8”

SSU2-304-128H

11/2” dia.

Satin Finish, Type 430 steel Tumble Finish, Type 304 steel

LMM-6038 Hi-Stick (used for polished surfaces with chromed finishes or stainless steel with a high polish)CER-X-000 1 oz (25 gr) CER-X-050 1/2 lb jar (250 gr)

CER-CAN-SMThermark® spray can, 6 oz

CER-CANspray can, 12 oz

(covers up to 1100 sq. in)

CER-TP1 1” x 50 ft. rollCER TP15 11/2” x 50 ft rollCER-TP2 2” x 50 ft roll

CER-STR6 2” x 6” strips (sold in multiples of 2)

CER-MSKCerMark™ mask

Accessories

.029”

• CerMark™ laser marking products are used to provide a high contrast permanent mark on bare metal. CerMark™ in combination with the power and speed of lasers will work on a variety of substrates. • Use the convenient aerosol can to spray onto metals, or use the paste

after mixing with denatured alcohol and brush on or use spray gun.

999-032-058 Nickel, 5/8"

Tag Accessories

JMP-025 Nickel, 1/4"JMP-038 Nickel, 3/8"

SPL-010 Nickel, 1" dia.

Split RingsJump RingsS-Hooks

CerMark™ Tape

Stainless Steel Tags

Commercial Plates

CerMark™ Metal Marking Compound

* MSDS available

LMM-6000

(Includes beaded 18” chain)(Includes beaded 24” chain)

• S-hooks, split rings and jump rings are sold separately

S.S. Tag

s

(Bracelet for ID-OE &ID-SRE, sold separately)

CER-NZZSpare nozzle for

spray can

CER-000 1 oz (25 gr) CER-010 4 oz (100 gr) CER-050 ½ lb jar (250 gr)

CER-KITCerMark™ kit,

includes empty bottle & polybrush

13

Anodized Tags - Laser

SHAPE PART NO. SIZE FINISH

ALM2-334-DB 1 1/16” x 1 5/8” SatinSilver

ALM2-734-DB 1 1/16” x 1 5/8” SatinGold

Metal Tags - Rotary

• (10 / pkg.)

SHAPE DESCRIPTION SIZE FINISH PART NO.

Jump Ring

1/4”3/8”

3/8”

NickelNickel

Brass

JMP-025JMP-038

JMP-738

Split Ring

5/8”3/4”1”

1 1/8”1 1/4”2”

1”

Nickel Nickel Nickel Nickel Nickel Nickel

Brass

SPL-058SPL-075SPL-010SPL-118SPL-125SPL-020

SPL-710

S-Hook

5/8”3/4”7/8”

5/8”3/4”

Nickel Nickel Nickel

Brass Brass

999-032-058999-032-075999-032-078

999-032-758999-032-775

Tag Accessories

Alumamark Tags

Pet Tags

G.I. Tags

(100 / pkg.)

(100 / pkg.)

(100 / pkg.)

• Gold and Nickel plated Brass, engraves gold.

• Laser engravable, engraves with black letters.

PT-SB7Small dog bone

3/4” x 1”

PT-SB3Small dog bone

3/4” x 1”

PT-DB7Large dog bone

1” x 1 1/2”

PT-DB3Large dog bone

1” x 1 1/2”

PTB-DB734Large dog bone

1” x 1 1/2”

PT-HT734Heart

1 1/8” x 1”

PT-CF3Cat face

1 1/8” x 1 1/8”

PT-CF7Cat face

1 1/8” x 1 1/8”

PT-LC7Cat silouette1” x 1 1/4”

PT-SF7Small cat face

5/8” x 3/4”

PT-SF3Small cat face

5/8” x 3/4”

PT-MS7Mouse

1 1/8” x 1 5/16”

PT-SD3Medallion7/8” dia.

PT-SS7Small stop sign

1” x 1”

PT-LS7Large stop sign

1 1/8” x 1 1/8”

PT-DH7Dog house1 1/8” x 1 1/2”

PT-DH3Dog house1 1/8” x 1 1/2”

PT-HY7Fire hydrant1” x 1 3/8”

PT-HT7Heart

1 1/8” x 1”

Nickel Plated Brass

Satin Gold Brass

I.D. Plate

Gold Plated Brass

PT-SD7Medallion7/8” dia.

ID-SH-734Satin Brass7/16” x 1 7/16”

GIL-B-734Satin Brass1 1/8” x 2”

GI-B-734Satin Brass3/4” x 11/4”

IDG-714G.P. Brass3/4” x 1 1/4”

IDLG-714G.P. Brass1 1/8” x 2”

• Chains are included with GI Tags.• See page 12 for Stainless I.D. plates

CLIP-100 Clear CLIP-200 White *Clips available individually(see page 9)

14

Anodized Tags - Laser

Circle 11/4”PTA-CIR-XXX

Stop Sign 11/8”PTA-STP-XXX

Decorative 11/4”PTA-DEC-XXX

Bell 11/8”PTA-BEL-XXX

Mouse 11/8”PTA-MSE-734

.050”

Mouse 11/4”PTA-MSE-354

Fire Hydrant 11/4”PTA-HYD-XXX

PTA-RIB-662Cancer Ribbon 11/2” Shamrock 11/8”

PTA-SHM-932

Heart 11/4”PTA-HRT-602

Heart 1”PTA-HRT-600

Guitar Pick 11/16”PTA-PIC-400

Crest 11/8”PTA-CST-600

Shield 11/4”PTA-SHD-XXX

Locker Shoe Tag 2”IDA-LCK-XXX

Slider Shoe Tag 2”IDA-SLD-XXX

• Replace XXX with colour code from the chart.

Dog Paw 11/4”PTA-PAW-400

Angel 15/8”PTA-ANG-XXX

Dog Face 11/4”PTA-DGF-XXX

GIA-OBM-XXX3/4” x 13/8”

Mini Tag

GIAA-35411/8” x 2”

PTA-PAW-40M Dog Paw 1” Dog Bone 11/4”

PTA-DB-XXX

Star 11/2”PTA-STR-XXX

GIA-OBL-XXX11/8” x 2”

• S-hooks sold separately.

* Items are stock colours (other colours available)• Some tags may require minimum of 50 pcs.

T-Shirt 11/4”PTA-TSH-XXX

G.I. Tags Shoe Tags

• Chains not included.

An

od

. Tag

s

*

*

*

*

* * *

*

* *

LAS-TAG-DIS Display Board

• Can be lasered on front and back.• Chains not included.• Can be lasered, burnished or scratch engraved.

LAS-TAG-BLKBlank

LAS-TAG-STRStar

LAS-TAG-BLK Blank LAS-TAG-BBL BaseballLAS-TAG-BBS SoftballLAS-TAG-BSK BasketballLAS-TAG-CHR CheerleadingLAS-TAG-FTB Football LAS-TAG-GLF Golf

2”

GI Style Tags

LAS-TAG-HCK Hockey LAS-TAG-SOC SoccerLAS-TAG-STR StarLAS-TAG-TEN TennisLAS-TAG-RUN RunningLAS-TAG-VLB Volleyball

Tags available:

*

562 Ice Blue

582 Purple

354 Silver

400 Black

500 Blue

502 Dk. Blue

662 Lt. Pink

734 Gold

932 Green600 Red

612 Dk.Orange

15

Medallions

acaDemic meDals (Display Board - #MED-FLMA-DIS)

Style Gold Silver Bronze

Art MED-FMG-ART MED-FMS-ART MED-FMB-ART

Band MED-FMG-BND MED-FMS-BND MED-FMB-BND

Chess MED-FMG-CHS MED-FMS-CHS MED-FMB-CHS

Computer MED-FMG-CMP MED-FMS-CMP MED-FMB-CMP

Drama MED-FMG-DRM MED-FMS-DRM MED-FMB-DRM

Graduate MED-FMG-GRD MED-FMS-GRD MED-FMB-GRD

Honour Roll MED-FMG-HNR MED-FMS-HNR MED-FMB-HNR

Math MED-FMG-MTH MED-FMS-MTH MED-FMB-MTH

Music MED-FMG-MUS MED-FMS-MUS MED-FMB-MUS

Lamp of Knowledge MED-FMG-LMP MED-FMS-LMP MED-FMB-LMP

Orchestra MED-FMG-ORC MED-FMS-ORC MED-FMB-ORC

Participant MED-FMG-PAR MED-FMS-PAR MED-FMB-PAR

Science MED-FMG-SCI MED-FMS-SCI MED-FMB-SCI

Perfect Attendance MED-FMG-ATT MED-FMS-ATT MED-FMB-ATT

Reading MED-FMG-REA MED-FMS-REA MED-FMB-REA

Religious MED-FMG-REL MED-FMS-REL MED-FMB-REL

Spelling MED-FMG-SPE MED-FMS-SPE MED-FMB-SPE

Victory Cup MED-FMG-VCC MED-FMS-VCC MED-FMB-VCC

Sportmanship MED-FMG-SPT MED-FMS-SPT MED-FMB-SPT

Star Performer MED-FMG-STR MED-FMS-STR MED-FMB-STR

sport meDals (Display Board - #MED-FLMS-DIS) Style Gold Silver Bronze

Baseball MED-FMG-BBL MED-FMS-BBL MED-FMB-BBL

Basketball MED-FMG-BSK MED-FMS-BSK MED-FMB-BSK

Bowling MED-FMG-BWL MED-FMS-BWL MED-FMB-BWL

Golf MED-FMG-GLF MED-FMS-GLF MED-FMB-GLF

Cross Country MED-FMG-CRS MED-FMS-CRS MED-FMB-CRS

Football MED-FMG-FTB MED-FMS-FTB MED-FMB-FTB

Karate MED-FMG-KAR MED-FMS-KAR MED-FMB-KAR

Cheerleading MED-FMG-CHR MED-FMS-CHR MED-FMB-CHR

Gymnastics MED-FMG-GYM MED-FMS-GYM MED-FMB-GYM

Hockey MED-FMG-HCK MED-FMS-HCK MED-FMB-HCK

Soccer MED-FMG-SOC MED-FMS-SOC MED-FMB-SOC

Swimming MED-FMG-SWM MED-FMS-SWM MED-FMB-SWM

Tennis MED-FMG-TEN MED-FMS-TEN MED-FMB-TEN

Track MED-FMG-TRK MED-FMS-TRK MED-FMB-TRK

Victory MED-FMG-VIC MED-FMS-VIC MED-FMB-VIC

Volleyball MED-FMG-VOL MED-FMS-VOL MED-FMB-VOL

Wrestling MED-FMG-WRS MED-FMS-WRS MED-FMB-WRS

laserable!

Back of medallion, laserable

RIB-034

Laserable Flame Medals 21/4”

Academic Medal Display Board

Sport Medal Display Board

• Neck ribbons sold separately (see page 16)

MED-FLMA-DIS Display Board (22 pcs)

MED-FLMS-DIS Display Board (19 pcs)

16

Medallions/Ribbons/Shields

MED-01-G Gold MED-01-S SilverMED-01-B Bronze

RIB-034Red/White/Blue

RIB-600Red

RIB-200White

RIB-500Blue

RIB-900Green

RIB-400Black

Award Ribbons, 2” x 8”

MED-106-GGold

MED-106-S Silver

1”

MED-106-BBronze

MED-VIC-GVictory, Gold

MED-905-G GoldMED-905-S SilverMED-905-B Bronze

MED-906-G Brt. GoldMED-906-S Brt. SilverMED-906-B Brt. Bronze

Medallions & Neck Ribbons

Aluminum Shields

Me

da

llion

s

2” 2” 2” 2” 2” 2”

Diamond drag or diamond burnish. Gauge .025. Replace “XXX” with colour code:

11/2” x 11/2”A25-***-SH1

11/2 x 3”A25-XXX-OVL

113/16” x 37/8”A25-XXX-OBL

7” x 53/4”A25-XXX-SH22

51/2” x 5”A25-XXX-SH23

31/2” x 3”A25-XXX-SH24

51/2” x 5”A25-XXX-SH25

91/4” x 71/2”A25-XXX-SH28 61/4” x 5”

A25-XXX-SH29

71/2” x 53/4”A25-XXX-SH30

61/2” x 43/4”A25-XXX-SH31

11/2” x 11/2”A25-XXX-SH4 11/2” x 11/2”

A25-XXX-SH7

11/4” x 11/8”A25-XXX-SH8 11/2” x 13/4”

A25-XXX-SH9

11/4” x 11/2”A25-XXX-SH10

1” x 13/4”A25-XXX-SH11

All colours: minimum order 10pcs

**SH1

OVL

OBL

SH4

SH7

SH8

SH9

SH10

SH11

SH22

SH23

SH24

SH25

SH28

SH29

SH30

SH31

**SH1 also available in sublimatable aluminum: Satin Gold (AS25-354-SH1), Satin Silver (AS25-734-SH1)

Bright Gold 704 Min.order

25 pcs.Bright Silver 344Black 400

Min.order

50 pcs.

Blue 500Red 600Brown 800

RIB-0011st Place

RIB-0022nd Place

RIB-0033rd Place

RIB-0044th Place

RIB-0055th Place

RIB-0066th Place

RIB-PARParticipant

V-Stitched neck ribbons with ring and clip, 32”

17

Sublimatable Tags - Metal

luggage & sport tags 2-sided, straps sold separately

Size Gauge Slot Brass Satin Gold

Aluminum White

Aluminum Satin Silver

Luggage Tag

1 1/4” x 2 1/4”1 1/2” x 3”2” x 3 1/2”2” x 3 1/2”

.040

.040

.020

.040

5/8”1/2”5/8”5/8”

BB40-734-LUG1 BB40-734-LUG BB20-734-LUG3 BB40-734-LUG3

AS40-200-LUG

AS40-200-LUG3

AS40-354-LUG

AS40-354-LUG3

Oval Tag

1 5/8” x 3 1/2” .040 3/8” BB40-734-OVL AS40-200-OVL

Sport Bag Tag

3 1/4” dia.

3 1/4” dia.

.020

.040

1/2”

1/2”

BB20-734-GLF

BB40-734-GLF

iD tags 2-sided, split ring sold separately

Size Gauge Hole Brass Satin Gold

Aluminum White


GI Tag1 1/8” x 2” .040 3/16” BB40-734-GIL AS40-200-GIL AS40-354-GIL

Oblong Tag1 1/8” x 1 7/8” .040 1/8” BB40-734-OB-K AS40-200-OB-K AS40-354-OB-K

key tags2-sided, split ring sold separately

Size Gauge Hole Brass Satin Gold

Aluminum White


Circle Key Tag

1 1/2” dia.

2” dia.

.040

.040

5/32”

5/32” BB40-734-CR-K

AS40-200-CR1-K

AS40-200-CR2-K AS40-354-CR-K

Heart Key Tag

1 3/8” x 1 3/8”

2” x 2”

.040

.040

1/8”

1/8”

BB40-734-HT-KT

BB40-734-HT-K

AS40-200-HT-K AS40-354-HT-K

Narrow Oblong Key Tag3/4” x 3” .040 5/32” BB20-734-OBL

Oval Key Tag

1 3/8” x 2 1/2” .040 1/8” BB40-734-OV-K AS40-200-OV-K AS40-354-OV-K

Rectangle Key Tag1 3/8” x 2 1/2” .040 5/32” BB40-734-RT-K AS40-200-RT-K AS40-354-RT-K

Square Key Tag

1 3/4” x 1 3/4” .040 1/8” BB40-734-SQ-K

18

g.i. tags 50 per case, chain sold separately

UNISUB® Aluminum White

Part No. AS30-200-ID 1-Sided AS45-200-OB-KT 2-Sided AS45-300-ID

Size 1 1/8” x 2” 1 1/8” x 2” 1 1/8” x 2”Gauge .045” .045” .030”

Silver 5949

i.D. tagsUNISUB® Aluminum, 50 per case, .030”

Size Corner UNISUB # Aluminum White

1” x 3” SQ 5730 AS30-200-P13

1 1/2” x 3” RC 5735 AS30-200-125

2” x 3” RC 5736 AS30-200-230

2” x 3 1/2” SQ 5748 AS30-200-CRS

2” x 3 7/16” RC 5733 AS30-200-CRR

2 1/2” x 3 1/2” SQ 5731 AS30-200-235

2 1/8” x 3 3/8” SQ 5749 AS30-200-218

oval tags

Aluminum, White AS25-200-OB1 AS25-200-OV1

Aluminum, Silver AS25-354-OVL

Aluminum, Gold AS25-734-OVL

Brass, Satin Gold BS20-734-OB1 BS20-734-OV1

Aluminum LaserSub™, White LSS15-200-OVL 11/16” x 2”, .015”

11/2" x 3” .025” thick

pet tags Gloss, 1-sided, 25 per case Triangular jump ring inc.

UNISUB® Aluminum White.045”

Part No. AS30-200-HRT AS30-200-DB AS30-200-HYD AS30-200-CIR

Size 1 1/4” x 1 3/8” 1 1/2” x 1” 1 1/8” x 1 1/4” 1 1/4” x 1 1/2”

5771 5772 5770

1" x 2”

Sublimatable Tags - Metal

Chromaluxe®

business carDs

Aluminum, White AS25-200-CRD, .025” AS40-200-CRD, .040” 2-Sided

UNISUB® Aluminum, White AS30-200-CRR , 2” x 37/16” RC

LaserSub™ Steel, White LSS15-200-CRD, .015”

Brass, Satin Gold Finish BS20-734-CRD, .020” BB20-734-CRD, .020” 2-Sided

Steel, Satin Gold Finish AST-734-CRD .015”

2” x 31/2”

Sub

. Tag

s

5773

5588 5916

17/8" x 27/8”

19

Luggage & Key Tags

metal Size Gauge SatinSilver

BrightSilver Black Bright

Rose GoldSatin

Rose GoldSatin

Yellow Gold

2” x 3 1/2”

.025 A25-334-TAG A25-344-TAG A25-400-TAG A25-714-TAG A25-754-TAG

.025 B25-334-TAG B25-344-TAG

.020 B20-400-TAG B20-714-TAG B20-754-TAG BB20-734-LUG3

.040 BB40-734-LUG3

1 1/2” x 3” .040 BB40-734-LUG

1 1/4” x 2 1/4” .040 BB40-734-LUG1

3 1/4” dia..020 BB20-734-GLF

.040 BB40-734-GLF

5/8” x 3 1/2” .040 BB40-734-OVL

Aluminum

Brass

Luggage Tags • See page 22 for luggage straps.

Sublimatable Key TagsNickel Finish

Key Tag Inserts

Key Tags

Replacement Insert

Pewter Finish

SUB-KY-CIRInsert .975"

SUB-KY-OVLInsert 1"

SUB-KY-RECInsert .8” x 1.1"

Keepsake Collection*Includes UniSub® Aluminum 1” diameter insert (see below)

UNI-PEW-BTL Bottle Opener, 1 1/2” x 2 5/8”

5778UNI-PEW-DIV

Golf Divot, 1 1/4” x 3”

5776

UNI-PEW-DVCKey Chain, 1/2” x 2 3/4”

5777

UNISUB® Aluminum

AS30-200-BTDV

BS - Satin Gold BrassAS - White Aluminum

1” x 11/2"

AS25-200-BK12 BS20-734-D16

11/16"

AS25-200-D16 BS20-734-D16

UNISUB® Aluminum,2-Sided, 50 per case

AS45-200-OV-KT 1 3/8” x 2 1/2”

5917

5995

AS45-200-RT-KT1 3/5” x 2 1/4”

5729 1” dia.

*Aluminum Insert Included (see below)

sublimatable key tags, 2-sided, 3/32”, 50 per case, includes clear tab and split ring

FR2-CIR-KT FR2-HRT-KT FR2-SQ-KT FR2-REC-KT FR2-FTB-KT FR2-MEG-KT

2 1/2” dia. 2 1/2” x 2 1/4” 2 1/4” x 2 1/4” 1 1/4” x 3” 1.875” x 3” 1.83” x 2.75”

5896

*Images for illustration purposes only

55205521 5524 5525 5766

CLIP-100 Clear CLIP-200 White *Clips available individually(see page 9)

20

Key Tags

• Matte Black, Engraves to gold

SKT-HCK

BKT-B-OVL1” insert

BKT-B-TMB1” insert

BKT-B-RCT1 1/2” x 1” insert

SKT-TMB SKT-HRTSKT-ONESKT-OBLSKT-OVL

SKT-CIR

• Rotary Engrave or Diamond Drag

Key Tags - Lacquered

Lacquered / Brass

Sports Key Tags - Lacquered

Laserable Key Tags

Zodiac Key Tags world’s Greatest

SKT-GLFSKT-RUN

SKT-VBLSKT-BBL

PRT-010Pull Apart

KY-JKS-SW KY-JN-01 KY-PALKey Pal

KY-RELKey Reel

KY-TAPTape Measure

KY-BLT-400Belt Loop

KY-SQZSqueeze Purse

KY-BPRBeeper Keeper

8”

KY-SOC(1 3/4” in nickel)

SKT-SOC

SKT-BDM

SKT-DRTSKT-SCE (enamal)

SKT-BWL

SKT-FTBSKT-PIN

worlD’s greatest keytags KY-WG-MOM Mom KY-WG-DAD Dad KY-WG-GMA Grandma KY-WG-GPA Grandpa KY-WG-ATH Athlete KY-WG-DRV Driver KY-WG-FRD Friend

ZoDiac keytagsKY-Z-AQU Aquarius KY-Z-LIB LibraKY-Z-ARI Aries KY-Z-PIS PiscesKY-Z-CAN Cancer KY-Z-SCO ScorpioKY-Z-CAP Capricorn KY-Z-SAG SagittariusKY-Z-GEM Gemini KY-Z-TAU TaurusKY-Z-LEO Leo KY-Z-VIR Virgo

Key Ta

gs

LKT-OVL11/4” X 21/2”

LKT-CIR11/2” dia.

LKT-TMB11/2” X 21/2”

LKT-OBL3/4” X 23/4”

Swivel Clips

Tag Accessories

21

Accessories

KY-MAG-L

KY-MAG-S

Carabiners

I.D. Key Tags

Coils

Magnetic Key Cases

Clear I.D. Tags

Super Wrist Coils Standard Wrist Coils Super Coils 7” with metal trigger

Designer Coils 10” with plastic clip Klips 23/4”

KN-W27 12/pkg.- Assorted colours

KY-WRT-CRD 12/pkg.- Assorted colours

KY-SPR-210 White

KY-SPR-410 Black

KY-KLIP White

KY-KLIP-4 Black

KY-COIL 24/card- Assorted colours

KTG/A200Key Caps, 200/box

KY-PHOClear, 2” x 3”

KY-ID-CLR7/8” x 21/4”

KY-ID-CLRL11/8” x 21/4” 11/8” x 21/4”

KY-ID-CLRL-R

KY-ID-PLA200/Box

KY-LUG-400

KY-ID-STL200/Box

• 6 colours• 2 styles• 12 pcs/pkg

(C-clip style available in individual colours: Special order min 100 pcs)

KY-CARB, 2”KY-CARB-L, 3”

straps Colour Size Part No.

Brown 1/2” x 6” STL-806

Black 6 3/4” STP-407

White 6 3/4” STP-207

Clear 6” long STV-006

beaDeD chain Size Part No.

4” with connectors CHA-B40

6” with connectors. CHA-B60

30” with connectors CHA-B30

500 ft. Roll CHA-00B

Connectors 100/pkg. CON-00B

Brass Plated 3/32” 30” with connectors CHA-B30-032

Brass Plated 3/32”500 ft. Roll CHA-00B-032

Connectors 100/pkg. CON-00B-032

beaDeD chain Size Part No.

4” with connectors CHA-040




500 ft. Roll CHA-000

Connectors 100/pkg. CON-000

Nickel Plated 3/32”24” with connectors CHA-024-032

30” with connectors CHA-300-032

straps Colour Size Part No.

Tan 3/8” x 5” STL-805

Black 3/8” x 5” STL-405

White 3/8” x 5” STL-205

Black 1/2” x 7” STL-407

22

Tag Accessories

NCK-200 WhiteNCK-400 BlackNCK-500 BlueNCK-600 Red

CHA-724 Chain with Bulldog Clips

NCK-LS-230 WhiteNCK-LS-430 BlackNCK-LS-530 BlueNCK-LS-630 Red

NCK-LC-230 WhiteNCK-LC-430 BlackNCK-LC-530 BlueNCK-LC-630 Red

KY-LAN 24 cords per pkg. (4 colours)

Swivel Clip with Split Ring

Leatherette

Straps

Beaded Chains

Neck Cords / Lanyards / Chains

Leather

Plastic Strap

Nickel Plated 1/8”

Neck Lanyard Clip - 30”Neck Cords - 25”Gold Plated Chain - 24”

Neck Cord, Swivel Clip - 30”Neon Lanyard - 36”

AccessoriesA

cc

esso

ries

Brass Plated 1/8”

23

soliD brass Size Gauge SatinSilver

BrightSilver

Bright RoseGold

Satin YellowGold

3/8” x 2 1/4” .050” M1-334 M1-344 M1-714 M1-734

1/2” x 2 3/8” .050” M2-334 M2-344 M2-714 M2-734

5/8” x 2 1/2” .050” M3-334 M3-344 M3-714 M3-734

3/4” x 3” .050” M4-334 M4-344 M4-714 M4-734

1” x 3” .050” M5-334 M5-714 M5-714 M5-734

bevelleD brass Size Gauge Bright Rose Gold Bright Silver

5/8” x 2 1/8” .015 B15-714-218 B15-344-218

5/8” x 2 5/8” .015 B15-714-258 B15-344-258

1” x 3” .015 B15-714-300 B15-344-300

• Includes adhesive strip. (6/pkg.)

ornamentals Size Bright Gold(imitation screws)

Bright Gold(plain)

3/4” x 15/8” 900-078

3/4” x 17/8” 900-079 900-079P

1” x 2 1/2” 900-081

7/8” x 2 1/2” 900-080 900-080P

notcheD brass Size Hole Size Gauge Satin Yellow Gold Bright Rose Gold

3/8” x 2” .020” B20-734-200

3/8” x 2 1/2” 1/16” .020” B20-734-250 B20-714-250

1/2” x 3” 5/64” .020” B20-734-300 B20-714-300

3/4” x 3 1/2” 3/32” .020” B20-734-350 B20-714-350

3/4” x 4” 7/64” .020” B20-734-400

7/8” x 2 1/2” .020” BS20-734-ORN

1” x 2” .020” BS20-734-NT12

1” x 2 1/2” .020” BS20-734-NT1

Oval

Rectangle

• All adhesive backed.

* custom sizes available by special order

Ornamental Plates

Notched Brass

Solid Brass

Identification Plates - Rotary

24

oblongs Size FinishColor

Aluminum.025”

Brass.020”

3/4” x 3”Satin Yellow Gold A25-734-OB3 B20-734-OB3

Bright Rose Gold A25-714-OB3

1 3/4” x 3 3/4”

Bright Silver A25-344-OBL

Bright Rose Gold A25-714-OBL B20-714-OBL

Brushed Rose Gold A25-754-OBL B20-754-OBL

ovals Size FinishColor

Aluminum.025”

Brass.020”

1 1/2” x 3”

Satin Silver A25-334-OVL

Bright Silver A25-344-OVL

Black A25-400-OVL B20-400-OVL

Bright Rose Gold A25-714-OVL B20-714-OVL

Brushed Rose Gold A25-754-OVL B20-754-OVL

Bright Copper A25-770-OVL

Brown A25-800-OVL

2 1/2” x 4 3/8” Satin Yellow Gold B20-734-456

3/4” x 11/2” Satin Yellow Gold BB20-734-OVL

Identification Plates - Rotary

Zipper pull 3/32 hole

rotary Metal Gauge Bright Rose Gold Satin Yellow Gold Brushed Rose Gold

Aluminum .025” A25-714-CRD

Brass.020”

B20-714-CRD BB20-734-CRD B20-754-CRD

Brass 2-Sided BB2-734-CRD

laserable Metal Gauge Matte Black Satin Blue Satin Red Satin Green

Satin Anodized Aluminum(lasers to

silver)

.020” AA20-512-CRD2 AA20-612-CRD2 AA20-912-CRD2

.025” AA20-402-CRD2

2” x 3 1/2”

Oblongs

Ovals

Business Cards

2” x 3 1/2”

I. D. Pla

tes

laserable metal Disks

Size Colour Laser Aluminum AlumaMark™ Laser Steel Laser Brass LaserFrost™

1”BlackSatin Silver Satin Gold

AL20-400-D1ALM2-334-D1ALM2-734-D1

LS15-400-D1 LB16-400-D1

1 1/4”BlackSatin Silver Satin Gold

AL20-400-D125ALM2-334-D125ALM2-734-D125

LS15-400-D125 LB16-400-D125

1 1/2”BlackSatin Silver Satin Gold

AL20-400-D150ALM2-334-D150ALM2-734-D150

LS15-400-D150 LB16-400-D150

2”BlackSatin Silver Satin Gold

AL20-400-D2ALM2-334-D2ALM2-734-D2

LS15-400-D2 LB16-400-D2ALM2-334-D2ALM2-734-D2

notcheD & perpetual plates

Size Colour Aluminum(lasers to silver)

Brass(lasers to bright gold)

AlumaMark

1” x 2 1/2”

GlossBlack

AL20-400-NT1 LB16-400-NT1

7/8” x 2 1/2” AL20-400-NT2 LB16-400-NT2

1” x 3 1/4” AL20-400-NT3 LB16-400-NT3

1 1/4” x 2 1/2” AL20-400-NT4 LB16-400-NT4

1” x 2 1/2” Satin Silver ALM2-334-NT1

Satin Gold ALM2-734-NT1

7/8” x 2 1/2”Satin Silver ALM2-334-080P

Satin Gold ALM2-734-080P

25

Metal Disks & Plates

• Minimum 100 pcs per size and colour.*Call our order desk for other sizes and colours

sublimatable metal Disks

Size Colour UNISUB® Aluminum

SublimationAluminum

SublimationBrass

LaserSUB™Steel

1” White Satin Gold Satin Silver Satin Bronze

AS30-200-D1 AS25-200-D1AS25-734-D1AS25-354-D1AS25-872-D1

BS20-734-D1

1 1/4” White Satin Gold Satin Silver Satin Bronze


BS20-734-D125

1 1/2” White Satin Gold Satin Silver Satin Bronze


BS20-734-D150

2” White Satin Gold Satin Silver Satin Bronze


BS20-734-D2LSS15-200-D2

4 1/2” White AS30-200-D450

- no holes

laserable metal plates - aluminum, brass, steel

Size Colour Aluminum(lasers to silver)

Brass(lasers to bright gold)

Steel(lasers to bright gold)

1” x 2”

Gloss Black

LB16-400-OV1

1 1/2” x 3” AL20-400S-OVL

1 7/8” x 2 7/8” LB16-400-OV2

2” x 3” LB16-400-OV23

2” x 3 1/2” PPB600-BK23

2 1/2” x 4 1/4” PPB600-BK24

1 1/2” x 3” Black withBright Goldborder .015”

LS15-400-RC15

1 5/8” x 2 1/2” LS15-400-OVL

laserable metal plates - alumamark™, laser frost™

Size Colour Alumamark™(lasers to black)

LaserFrost™

5/8” x 1 5/8” Satin Silver ALM2-334-078P


3/4” x 1 7/8”Satin Silver ALM2-334-079P


1” x 2 1/2” Satin Silver ALM2-334-081P


1 5/8” x 2 1/2”Silver .018” LFS18-300-OVL

Gold .015” LFB15-700-OVL

26

Laserable Plates

• AlumaMark™ lasers to black.• LaserFrost™ lasers to bright gold or satin silver.

• See page 27 for complete selection of AlumaMark™ and LaserFrost™ products.

To order custom cut shapes: · Specify material, plastic or metal, thickness, size and colour · Choose one of the following corner styles (from 3/32” up to 1”) · If holes are required, specify location and size

Custom Cut Plates

Square Corners Radius Corners1/8”, 1/4”, 3/8”, 1/2”

Notched Corners1/8”, 1/4”, 3/8”, 1/2”

Scallop Corners1/4”, 3/8”, 1/2”

Slot1/8” x 9/16”

Hole3/32”, 1/8”, 3/16”

Chamfer1/4”, 3/8”

Lase

r Plate

s

27

alumamark™

Description Size Satin Silver Satin Gold

Disk

1” dia. ALM2-334-D1 ALM2-734-D1

11/4” dia. ALM2-334-D125 ALM2-734-D125

11/2” dia. ALM2-334-D150 ALM2-734-D150

2” dia. ALM2-334-D2 ALM2-734-D2

Ovals

5/8” x 15/8” ALM2-334-078P ALM2-734-078P

3/4” x 17/8” ALM2-334-079P ALM2-734-079P

1” x 21/2” ALM2-334-081P ALM2-734-081P

Dog Bone Tags 11/16” x 15/8” ALM2-334-DB ALM2-734-DB

Perpetual Plates 1” x 21/2” ALM2-334-NT1 ALM2-734-NT1

Notched Plates 7/8” x 21/2” ALM2-334-080P ALM2-734-080P

laser frost™

Description Size Silver - .018” Gold - .015”

Sheet 12” x 24” LFS8-300-Q1 LFB15-700-Q1

Disk

1” dia. LFS18-300-D1 LFB15-700-D1

11/4” dia. LFS18-300-D125 LFB15-700-D125

11/2” dia. LFS18-300-D150 LFB15-700-D150

2” dia LFS18-300-D2 LFB15-700-D2

Oval 111/16” x 29/16” LFS18-300-OVL LFB15-700-OVL

Business Card 2” x 31/2” LFS18-300-CRD LFB15-700-CRD

Name Plate 2” x 8” LFS18-300-28 LFB15-700-28

AlumaMark™ & Laserfrost™

LaserFrost™ allows you to laser through a printed frosted background to bright gold brass or satin silver steel creating the time honoured look of the “etched and frosted” process.

AlumaMark™ is one of the most innovative markable aluminum in the industry. You can achieve rich black positive graphics when marking metal. Excellent durability with resistance to chemicals, heat, abrasion and sunlight.

*Call our order desk for other sizes and colours

28

Tapes & Adhesives

• Easy-tear, acrylic adhesive with a crepe liner.

• Economical paper lined, suitable for general applications. • Rubber based adhesive.

• HIGH-TACK (side is applied on the table).• LOW-TACK (side holds the plate)• Re-usable, eliminates clamps or jigs.

• Long-lasting adhesive provides a solid, permanent bond.• Adhesive layer is protected by a coated liner to allow easy release.

• Double-sided.• Immediate bond is formed at an adhesive temperature of 250o F.• Holds Hot Stamping dies.

DSP-010Holds 1 Roll

DSP-020Holds 2 Rolls

DSP-030Holds 3 Rolls

* By special order.

• Laser marking tape designed for use on glass, ceramic, ceramic-like and porcelain substrates.• High contrast, permanent marks on uncoated metal or glass.

• Holds sublimated image to the product while being sublimated in the heat press.

Engraving Table Tape

Heat Tape

Maxi-Stik Tape

Double-Sided Tape

Sublimation Tape

Tape Dispensers

CerMark™ Tape

Foam Grip Tape

3MTM Adhesive Transfer

• High performance tape. • Our #1 seller. • Long lasting, all-weather acrylic adhesive holds up in extreme cold, heat and humidity.

• Conforms well to uneven surfaces.• Good resistance to water, detergents, alcohol & cleaners.• Acrylic based adhesive.

Size Length Part No.

1/4”

x 55 meters

99T-025

3/8” 99T-038

1/2” 99T-050

3/4” 99T-075

1” 99T-010

11/2” 99T-150

2” 99T-200

1/2” x 33 meters 99T-050-36

1” 99T-010-36

Size Length Part No.1” x 55 meters 20H-010


1/2” x 55 meters 99E-050

3/4” x 66 meters 99E-075


1/2”x 33 meters

99P-050

3/4” 99P-075

1” 99P-010


1/2”

x 55 meters

99S-050

1” 99S-010

11/2” 99S-150

2” 99S-200

Size Length Part No.2” x 6” Strip CER-STR6

1”

x 50ft. roll

CER-TP111/2” CER-TP152” CER-TP2

31/2” CER-TP35*

Size Length Color Part No.

1/2” x 72 yards Clear SUB-HT2-CLR

Size Length Color Part No.

1/2” x 72 yards Green SUB-99HT9

Size Type Part No.12” x 24”

Sheets 99A-467-S12

24” x 36” 99A-467-S3612” x 180 yard

Roll 99A-467

12” x 180 yard 99A-468

foam grip tapeThickness Length Part No.

1/32”1/2” x 66 meters 99F-050

1” x 66 meters 99F-010

1/16”1/2” x 33 meters 99F-650

1” x 33 meters 99F-610

1” x 50 yards 99F-610-L

super foam tapeThickness Length Part No.

1/32” 1” x 66 meters 994-032

1/16” 1” x 33 meters 994-062

994-062

*Items may not be exactly as shown.

(LMM6018)

• Holds sublimated image to the product while being sublimated in the heat press. • 2 mil thickness.

Tap

es &

Ad

h.

Double-sided Supertuff Tape

Adhesives & Fasteners

29

Dual LockTM Fastener Felt Pads

Adhesive Remover

MSK-PEEL

Pre-mask Tape Roland® AS-10 Adhesive Sheets

Magic Peel™

Adhesive Spray

Size Length Part No.11/4”

x 100 yds

9PR-MASK-1

21/4” 9PR-MASK-2

31/4” 9PR-MASK-3

41/4” 9PR-MASK-46” 9PR-MASK-612” 9PR-MASK-12

Size Part No.8” x 6” ROL-AS-10

Size Part No.1 Quart 99A-REM

Size Part No.

17 oz. can/695ml. MM-77

Size Part No.17.6 oz/500 ml. can 900-011

Applicator* 900-010

Size Part No.

17 oz. can/695ml. NS-57

Size Part No.

3/8” dia. (100 / sheet) FLT-038

Size Part No.

3/8” dia. (225 / sheet) FLT-CLR

Size Length Type Part No.

1” x 75 ft. roll

Hook 99H-000Loop 99L-000

x 12” StripHook 99H-012Loop 99L-012

Size Type Part No.

1/2” x 12”

Dense + Light(2 pc. set.) 99D-512

Light 99D-170LDense 99D-400D

• Ultra high grade paper with high tack adhesive.• Includes superior release liner adhesion to prevent wrinkling, curling, edge lifting.• Protects engraving when cutting out shapes.• Assists with decreasing the effects of the laser burn.

• Roland® AS-10 hold-down sheets are designed to adhere flat engraving material to the surface of any engraving machine.

• These sticky mats are similar to a sheet of double sided tape.

• Each sheet can be used several times over.

• High tack, multi-purpose.• Resists water and humidity.

• Multi-purpose with high coverage and high tack.

• Bonds lightweight materials, metals, foam, glass etc.

• Fuses plastic backed hardware to badge blank.

• 10 sheets/pkg.

• Works on most materials covered with protective plastic masking such as aluminum, brass, engravable plastic and plexiglass.

• Magic Peel™ won’t scratch or scuff highly polished surfaces.

• Removes most types of glue and adhesives left by decals, tapes and graphics.

• Simply spray and leave on for 60 seconds (no more than 120) then lightly scrap off glue residue.

• Rinse area with water.• Use in well ventilated area.

• White Nylon, Adhesive back.• “Hook” is used for signage for office partitions.

• Prevents scratching on desks & walls.• For use on Trophy Plaques & wooden bases.

• Adhesive backed.• Clear bumps. Great for acrylic, glass or crystal awards.

• Mates to itself.• Allows for quick removal of signage.• Adhesive backed.• Used with Designer Frames.

With one swipe, Magic Peel™ lifts an edge of protective plastic allowing you to easily grab the plastic and pull it off.

*Includes Spray Nozzle

Cesco Bond

* Plastic squeeze bottle.• Eliminates overflow problems & evaporation.

Velcro (Hook and Loop)

• Strong and lasting.• Bonds plastic to metal or plastic to plastic.

Scotch Grip Adhesive

Size Part No.5 oz./147 ml. 900-030

30

Packaging Materials

Size Part No.

2” x 2” BGS-220

2” x 3” BGS-230

3” x 4” BGS-340

3” x 5” BGS-350

4” x 6” BGS-460

6” x 6” BGS-606

6” x 8” BGS-608

7” x 10” BGS-710

9” x 12” BGS-912

10” x 13” BGS-113

13” x 18” BGS-1318

15” x 20” BGS-1520

• Made from durable 2 mil plastic• Sold 100 per package

Plaque size Pouch size Part No.4” x 6” and 5” x 7” 6” x 8” POU-057

6” x 8” 7” x 9” POU-0687” x 9” 8” x 10” POU-0798” x 10” 9” x 11” POU-8109” x 12” 10” x 13” POU-912

101/2” x 13” 111/2” x 14” POU-11312” x 15” 13” x 17” POU-125

• 1/8” thick • Premium quality• Protects plaques

Poly Bags

Jiffy Bags

Masking Tape Filament Tape Carton Sealing Tape

• Boxes hold plaques up to 7/8” thick

• Clear poly window provides maximum protection and visibility

• Bubble Mailing Envelope(Self Seal)

• Great for use as strapping.• Extra tough.

Tapes

Bags

Plaque Pouches (foam)

Nails

Plaque Packaging


1/2” x 55 meters MSK-050

3/4” x 66 meters MSK-075

Size Length Colour Part No.

2” x 66 metersTan CTN-T21

Clear CTN-C20Size Length Part No.

3/4” x 55 meters FIL-075

Size Length Part No.6” x 9” (inside) x 55 meters JIF-000

Presentation Boxes

Tap

es &

Ad

h.

Nails (100/pack)NLS-738 Gold 3/8” NLS-750 Gold 1/2” NLS-338 Silver 3/8” NLS-350 Silver 1/2”

Screws - Phillips (100/pack)SCP-025 Gold 1/4” x 1/16”SCP-038 Gold 3/8” x 3/32”

Domed Nail (100/pack)NLS-DOM Gold 7/16”

31

• Multi-Mat Plus™ is a silicone-like product used to hold down thin materials, as well as items with “peel-and-stick” adhesive backing applied. Tape will not normally hold down these items.

• Multi-Mat Plus™ will last for many years under normal use. The permanently tack surface renews itself when wiped off with a bit of soap and warm water.

• If you engrave thin materials or laser foils, Multi-Mat Plus™ will hold the material flat and in focus.

Multi-Mat™ & LaserTape™

Part No. TKM2-C122 TKM2-C124

Sizes 12” x 12” 12” x 24”

Description Seklema™ Mat,Clear greaseless surface

Seklema™ Mat,Clear greaseless surface

Size Part No.

6” x 12” TKM2-6129” x 12” TKM2-91212” x 12” TKM2-12212” x 24” TKM2-124

Size Description Part No.

6” x 25’

Laser Tape

LAS-TAP-625

4” x 100’ LAS-TAP-400

6” x 100’ LAS-TAP-600

4” x 6’’ Strips LAS-TAP-406

SEKLEMA™ Mat

Multi-Mat™

Photo Brasive LaserTape™

• 2-sided• 2-sided

• SEKLEMA™ is a 2-sided material designed to hold materials on your engraving table without the use of tape or jigs.

• SEKLEMA™ works with both metal and plastic, as well as many other materials designed for engraving.

• SEKLEMA™ is re-usable, non-stick material that can be easily cleaned with only a soft sponge and water.

Laser table with Multi-Mat™

Laser table without Multi-Mat™

LaserTape™ Sandblastable Laser Mask

Brasive®PhotoS Y S T E M S

LaserApply Blast!

PhotoBrasive® LaserTape™ is a sandblastable laser mask, de-signed to create stencils for the high end corporate, promotional products and giftware industries. Simply Apply-Laser-Blast!

LaserTape™ allows you to use a laser engraver machine in correlation with a sandblast machine to create low-cost stencils. LaserTape™ conforms beautifully to surfaces without wrinkling, burns clean and peels easily making for an effortless removal.

• No PVC!• Quick burn• Available in 4 mil

• Fast & simple clean up - peels off easily• Easy to colourfill after sandblasting• Conforms smoothly to surfaces without wrinkling

32

Part No. LAS-MSK-PNT LAS-MSK-QRT LAS-MSK-GAL

Size 1 pint - 16 oz 1 quart - 32 oz 1 gallon- 4 quarts

Coverage approx. 2000 sq. in approx. 4000 sq. in approx. 16000 sq. in

Part No. LAS-ACR-CLN LAS-ACR-POL LAS-ACR-SCR

Size 8 oz. 8 oz. 8 oz.

Description

Gently cleans all plastics without scratching. Leaves a lustrous shine that resists fogging, repels dust, and eliminates static.

Removes fine scratches, haziness and abrasions from most plastics. With repeated use, NOVUS No. 2 restores faded and discolored plastics.

Removes heavy scratches and abrasions from most acrylic surfaces. Use when damage is too severe to be restored with NOVUS No. 2 polish.

Cleaners/Polishers/Masking

LiquaMASK™

LAZRCLEAN™

NOVUS™ Acrylic Polisher

LAZRCLEAN™ is 100% natural, biodegradable, all-purpose water-based cleaning solution, made with soy and corn.

Does not contain any solvents,kerosene, phosphates, or any other harmful toxins.

LAZRCLEAN™ is ideal for cleaning materials after engraving-residue left on wood, rubber, sticky film left on plastic, acrylics and metalproducts.

LiquaMASK™ applies as a liquid and quickly dries to create a durable mask. LiquaMASK™ is laser-safe, non hazardous and non-toxic.

The mask will protect the topsurface of the substrate to prevent smoke damage or scorching from the engraving or cutting process.

Ideal for a variety of laser processes including colour filling, light sand-blasting and deep engraving.

Cle

an

ers

LAS-CLN-BTL LAS-CLN-BTL3 LAS-CLN-KIT

PREMIXED with water,16 oz spray bottle

(ready to use)

PREMIXED with water,32 oz spray bottle

(ready to use)

Kit includes concentrate* & empty spray bottle. Concentrate yields eight 16 oz

bottles of LAZRCLEAN™.

LiquaMask™ works with: glass, acrylic, leather, coated metal, marble & granite, engraving plastic, clear coated wood & other materials.

*Concentrate sold as part of kit only.

Colour Part No.White EN - 200Grey EN - 312Black EN - 400

Light Blue EN - 500Navy Blue EN - 552

Purple EN - 582Fire Red EN - 600

Colour Part No.White 900-029-200Black 900-029-400Red 900-029-600Gold 900-029-700

Colour Part No.Bright Red EN - 604

Orange EN - 612Metallic Gold EN - 700

Primrose Yellow EN - 704Medium Green EN - 900

Pine Green EN - 912Emerald Green EN - 932

Size Part No.12 oz. can TRI-100

Size Part No.4 oz. 909-000

Colour Part No.Black 900-029-BLKBlue 900-029-BLU

Green 900-029-GRNReplacement Nibs 900-029-TPS

Size Part No.

4 oz. 901-000

Size Part No.

4 oz. 902-000

Size Part No.11 oz. (311g) Aerosol Can LUB-000

25 oz. 7ml Tube LUB-TBE

33

Lubricants / Oxidants

• For filling front or reverse engraved letters in metal and plastic.• Enamel dries rapidly and gives a high-gloss finish.

• Quick and easy way to add colour to engraved letters on metals, wood, plastic or ceramic. • Rub-in paint. Wipes off easily.• Lacquer-Stik is permanent. Will not smear or rub off.• Withstands temperatures as high as 500oF.

Engraver’s Enamel Paint

Lacquer-Stiks

Super LubeLubricants

Oxidants

Valve Action Paint

• Blackens engraved letters.

Tri-Flow ® Aluminum Oxidant

Green Engravers Lube

Brass Oxidant

• Superior lubrication contains TeflonTM.• Penetrates and protects without gumming up.• Can be used on both manual and computerize machines.• Lubricates Equipment: rails and leak screws.• Petroleum-based.

• Multi-Purpose Synthetic Lubricant with Syncolon (PTFE).• Prevents friction and wear.• Cleans and penetrates, then evaporates, leaving a long-lasting film of lubricant.• Lasts 4 times longer than petroleum based lubricants.• Reduces maintenance and service requirements.• Withstands temperature: -450F to 4500F/-400C to 2320C.• Recommended for XenetechTM Engraving Machines.

• Lubrication for rotary engraving on metals.• Extends cutter life.• Non-oily cutter coolant.• Washes with water.

EN-LB95-1

• Natural tips cupped to needle sharp point for fine characters. • Extra fine quality, brown squirrel hair quills set to a thin straight even edge.

EN-GB178-1Paint Brushes

• Marks with real paint, dries in 3 minutes.• Nib releases paint as needed for continuous marking.• Marks on all surfaces including: metal, wood, glass, plastic, rubber, cardboard, and paper.• Lead-free, low halogens.• Marking range: -50°F to 150°F (-46°C to 66°C)• The fiber nib is replaceable.

34

• Acryfil is a specialized formula of polymer acrylic developed especially for use with reverse engravable materials

• Paints can be mixed to create custom colours• Primary kit colours are available individually• Kits include poly brush

Colour Name 2 fl oz Jar 8 fl oz Jar

Red PNT-R601-2 PNT-R601-8

Yellow PNT-R701-2 PNT-R701-8

Orange PNT-R651-2 PNT-R651-8

Light Blue PNT-R562-2 PNT-R562-8

Blue PNT-R501-2 PNT-R501-8

Purple PNT-R582-2 PNT-R582-8

Ocean Blue PNT-R592-2 PNT-R592-8

Pine Green PNT-R902-2 PNT-R902-8

Bright White PNT-R204-2 PNT-R204-8

Black PNT-R401-2 PNT-R401-8

Silver PNT-R304-2 PNT-R304-8

Gold PNT-R771-2 PNT-R771-8

PaintPlus™ paints are acrylic non-toxic paints ideal for sign-making applications enhanced with custom colour matching. The smooth, rich colours provide excellent coverage and are self-sealing.

PaintPlus™ Primary 2 fl oz Kit:

PNT-RKIT-2 contains: • Twelve 2 fl oz jars of PaintPlus™

Primary Paint colours• Two 1” foam applicators

PaintPlus™ Primary 8 fl oz Kit:

PNT-RKIT-8 contains:• Twelve 8 fl oz jars of PaintPlus™

Primary Paint colours• Two 1” and two 3” foam applicators

PaintPlus Safety 2 fl oz Kit:

PNT-RSKIT-2 contains: • Six 2 fl oz jars of PaintPlus™

Safety Paint colours• 1” foam applicator

PaintPlus Safety 8 fl oz Kit:

PNT-RSKIT-8 contains: • Six 8 fl oz jars of PaintPlus™

Safety Paint colours• 1” and 3” foam applicators

Colour Name 2 fl oz Jar 8 fl oz Jar

Safety Red PNT-RS601-2 PNT-RS601-8

Safety Yellow PNT-RS701-2 PNT-RS701-8

Safety Orange PNT-RS651-2 PNT-RS651-8

Safety Blue PNT-RS501-2 PNT-RS501-8

Safety Purple PNT-RS582-2 PNT-RS582-8

Safety Green PNT-RS901-2 PNT-RS901-8

Colour Part No.Sapphire Blue RUB-BLUE

Black RUB-BLACKGold Leaf RUB-GOLD

Green RUB-GREENPurple RUB-PURPRed RUB-REDRuby RUB-RUBY

Silver Leaf RUB-SILVAntique White RUB-WHT

KIT 1Primary Kit

KIT 2Designer Kit

Black A1 Pumice A30White A2 Pewter A31Red A3 Grey A33Blue A4 Wedgewood A36Green A5 Slate A37Yellow A6 Jade A40Brown A7 Teal A42Gold A92 Dusty Mauve A45Silver A93 Plum A47

KIT 3 - Combo Kit

Combination of Kit 1 and Kit 2

POL-000Poly Brush

Acryfil Paint Rub ‘n Buff®

Paint

• 1/2 oz (15ml) tube

• Rub ‘n Buff is a wax base metallic finish

Primary Paints

Safety Paints

Paints

Colour Part #

WhiteBlackRed

FS100FS101FS103

WhiteBlackRed

FS200FS201FS203

WhiteRed

FS250FS253

WhiteBlackRed

FS300FS301FS303

WhiteBlackRed

FS400FS401FS403

GreyRed

FS250-ABFS250-RAB

GreyRed

FS200-ABFS200-RAB

GreyRed

FS100-ABFS100-RAB

Colour Part #

WhiteBlackRed

X99-2X99-1X99-3

WhiteBlackRed

X99-T2X99-T1X99-T3

WhiteBlackRed

FX99-2FX99-1FX99-3

WhiteBlackRed

FX100-2FX100-1FX100-3

WhiteBlackRed

X100-2X100-1X100-3

Colour Part #

White MS-100

WhiteRed

FS278FS278-3

WhiteBlackRed

X60-2X60-1X60-3

WhiteBlackRed

KT88-2KT88-1KT88-3

WhiteBlackRed

FX77-2FX77-1FX77-3

• 3 ply plates, can be engraved on both sid• Flexible engraving stock, shatterproof

35

Metal

Plastic

Legend Plates

2-7/16”

2-7/16”

1-7/32”

7/8”1-3/4”

1-7/32”

1-7/8”

7/16”

1-3/4”

2-7/16”

1”

1-7/32”

• For push buttons, switches and pilot or indicator lights• Fit most manufacturer’s equipment

• Anodized aluminum plates • For push buttons, switches and pilot or indicator lights

2-7/16”

2-7/16”

2-1/4”

36

Auxiliary EquipmentA

ux. Eq

uip

.

Description Metal Shear Plastic ShearShear with 12” Blade SHR-M12-AC SHR-P12-AC

Upper metal replacement blade SHR-M12-UMA SHR-P12-UMP

Your shear blade re-sharpened SHR-MC-999 SHR-999

Metal & Plastic Shears

• Capacity: Aluminum .040” (hole punch capacity .025”) Brass .025” (hole punch capacity .020”) Steel .015” Flexible Plastic .063”• Corners without burrs or distortions• Dies sold separately• Standard Cornermate® & EZ-Cornermate® share the same die sizes

• Capacity: Aluminum .063” Brass .030” Steel .020” Flexible Plastic .350”• Size: 10”L x 6.5”W x 9”H• Weight: approx. 7.5 lbs. (with cutting unit)• Dies sold separately, see chart

Corner Rounders - Cornermate Series®Standard Cornermate® Base

Heavy Duty Cornermate PLUS® Rounder Base

CRN-M40 Base

CRN-060 Base

Die

Radius die (See chart for part # for dies)

• Twin Lexan safety shields• Long handle for maximum shear power• Size: 26”L x 14”W x 11”H• Weight: approx. 35 lbs.

Die Radius Notched Scallop Chamfer Hole Slot*

3/32” DIE-032HP1/8” DIE-018R DIE-018N DIE-018HP DIE-SLT3/16” DIE-316R DIE-316N DIE-316HP1/4” DIE-025R DIE-025N DIE-025S DIE-025C5/16” DIE-516R3/8” DIE-038R DIE-038N DIE-038S DIE-038C1/2” DIE-050R DIE-050N DIE-050S3/4” DIE-075R DIE-075N 1” DIE-100R DIE-100N

Die Radius Slot*

1/4” DIE-SLT21/2” DIE-12R3/4” DIE-34R 1” DIE-10R

CRN-000 Base

• Upper curved power blades for metal• Metal Shear capacity: Aluminum .040” Brass .025” Steel .015”

New

New

• Cornermate Plus® has a wider opening for flexible plastics up to .350”• Features a controlled action roller that moves up and down like a press• Cornermate Plus® die sizes listed in chart below

• Standard table• Size: 10”L x 6.5”W x 6”H• Weight: approx. 6 lbs. (with cutting unit)

Die

Radius die

• Size: 10”L x 6.5”W x 8.5”H • Weight: approx. 6.5 lbs. (with cutting unit)• EZ-Cornermate® is half the effort of the standard table• Heavy duty aluminum work table with tool steel-hardened punch and die shapes

EZ-Cornermate® Rounder Base

*Slot measures: 1/4” x 9/16”

*Slot measures: 1/4” x 9/16”

LESS

EFFORT

HEAVY

DUTY

37

Button Machines

Machine 150

Machine 250

Handi Circle CutterQuick Punch Cutter

Die Size Part No. Includes

21/4” BM150

• Handi Circle Cutter and glass plate• CDROM with instructions, templates, and tutorials (PC format)• Button components to make 250 complete buttons• Lifetime Warranty• Size 4 x 10 x 8 inches high• Weight: 11 lbs

Die Size Part No. Includes

1” BM2-D1 • These come with a Quick Punch • CDROM of templates • Lifetime Warranty

11/4” BM2-D125

11/2” BM2-D150

13/4” BM2-D175 • These come with a Handi Circle Cutter • CDROM of templates • Lifetime Warranty

21/4” BM2-D225

3” BM2-D3

Die Size Part No.

11/4” to 71/4” dia. BBCUT

Replacement blades (12 /pack) BBCUT-BLD12

Die Size Part No.1” BM-QP1

11/4” BM-QP125

11/2” BM-QP150

• Makes 2 1/4” inch buttons only• The Machine 150 frame is made of military-grade composite material• Average production: 1 button every 24 seconds/150 buttons per hour

• Will adjust to cut circles from 11/4” to 71/4” in diameter, and comes with easy to follow illustrated instructions.• The Handi Circle Cutter and plate is included with each Machine 150 and select Machine 250 models (see chart above).

• Capable of making regular pinback buttons, bottle openers, magnet buttons, keychain buttons, and mirror buttons• Exclusive short handle stroke requires very little force to make a button

• The Quick Punch circle cutter is a fast and simple way to cut out your artwork for your buttons.• 3 sizes available: 1”, 1-1/4”, 1-1/2”.• Included with select Machine 250 models (see chart above).

38

Button ComponentsButton M

ach.

Super Punch

Round Button Sets (min. 500)

Collet Sets (min. 500)

2” Award Button Sets (min. 500) Badge-a-Minit Button Sets (min. 500)

Mirror Sets (min. 125)

Keychain Sets (min. 125)

Magnets Sets (min. 125)

Bulldog Clip Sets (min. 125)

3” Circle Punch

Die Size Part No.3” dia. BBDIE-3

Size Punch with Die Die only1” BBPUNCH-1 BBDIE-11-1/2” BBPUNCH-15 BBDIE-152” BBPUNCH-2 BBDIE-2

Size Part No. Includes1-1/4” BBUT-125

• Shells • Mylar • Backs with Pins inserted

1-1/2” BBUT-151-3/4” BBUT-1752-1/4” BBUT-2252-1/2” BBUT-253” BBUT-33-1/2” BBUT-354” BBUT-4

Size Part No. Includes1” BBUT-1

• Shells • Mylar • Collets • Spring Lock Pins

1-1/4” BBCOL-1251-1/2” BBCOL-151-3/4” BBCOL-1752-1/4” BBCOL-225

Size Part No. Includes1-1/4” BBM-125 • Shells

• Mylar• Backs w/ Pins inserted

2-3/8” BBM-238*3” BBM-3

Size Part No.2” BBUT-2

Includes • Shells • Mylar • Back with Pins inserted

• Punch out your own dies in the colour and quantity you need.• Interchangeable dies. Available in 1”, 1-1/2”, and 2” sizes.• Both punch and die are made with hardened tool steel providing many years of use.• Easy to operate and portable.• Dimensions: 6” x 6” x 25”• Weight: 26 lbs.

The 3 inch Circle Punchis the perfect circle punch for anybody working withphotos or 3 inch sizebuttons.

Plastic Cover(also called Mylar) Shell Back with Pin inserted

Plastic Cover(also called Mylar) Shell Back with Pin inserted * The 2-3/8” size is also called 2-1/4” size.

Size Part No. Includes

2-1/4” BBMIR-225• Shells• Mylar• Collets• Mirrors• Mirror Shims3” BBMIR-3

Size Part No. Includes2-1/4” BBKEY-225 • Shells

• Back• Mylar• Keychains2-1/2” BBKEY-3

Size Part No. Includes2-1/4” BBMAG-225 • Shells

• Mylar • Plain Books • Magnet2-1/2” BBMAG-25

1” x 12” BBMAG-12 • Magnet Strip

Size Part No. Includes2-1/4” BULLDG-225 • Shells

• Mylar• Backs w/ Bulldog Clip2-1/2” BULLDB-25

Magnet Strip 1”x12 Ft., 1/8” thick (Kiss Cut to 1”x1”)

Terms and Conditions of Salegeneral1. All accounts are sold C.O.D. certified cheque, money order or credit card only.2. NET 30 DAYS (approved accounts only). Credit must be applied for on our credit application form.3. A service charge of 2% (two per cent) per month will be assessed on past due accounts.4. Delinquent accounts over 60 days will be placed on credit hold, and may revert to COD terms. 5. There will be a $25.00 Service Charge for returned cheques.6. All discrepancies on shipment MUST be reported immediately.

pricing1. Prices and specifications are subject to change without notice.2. All prices are NET prices. Effective prices shall be those on most current price list.3. GST/HST is applicable on all merchandise. 4. Minimum order is $25.00 for Net 30 day accounts, or small order fee will be applied.

creDit carDsVISA, MASTERCARD and AMEX credit cards are accepted. VISA, MASTERCARD - minimum $50.00 and AMEX - minimum $100.00Credit cards are not accepted on Net 30 day accounts once terms have been extended.

freightAll goods are shipped F.O.B. Canadian Engravers Supply, prepaid and charged, unless specifically noted.

Otherwise shipping and handling charges will be added to the invoice.

gooDs DamageD in transitThe customer is responsible to check all parcels received for any damages by freight carrier. If damages occur, customer is to advise the carrier upon receipt of goods, keep all packaging, and advise our office immediately for claim instructions.

NOTE: Carriers will refuse any claim if not advised immediately.

returneD gooDs1. CUSTOM FABRICATED OR NON-STOCK ITEMS ARE NOT ELIGIBLE FOR RETURN.2. Stock items are not eligible for return after 30 days. 3. Merchandise returns require a return goods authorization number. When calling, notify our Customer Service

Department with product number and our invoice or packing slip number. 4. A credit will be applied to the customer’s account for returned goods, provided products are in the original

packaging and are received in good condition. No refund cheques are issued.5. Credits will not be refunded to credit cards, only applied to the customers accounts for use on next order.6. Returned goods are subject to 15% restocking charge, with a minimum charge of $10.00

warranty / DisclaimerThe following warranty is in lieu of all warranties expressed or implied and covers all products sold by Canadian Engravers Supply Company Ltd. SPECIFICALLY, SELLER AND MANUFACTURER DISCLAIM WARRANTY OF MERCHANTABILITY OF OR FITNESS FOR A PARTICULAR PURPOSE and manufacturers/sellers only obligation shall be to replace such quantity of the product proved to be defective. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use of, or the inability to use the product. Before using, user shall determine the suitability of the product for his intended use and User assumes all risk and liability whatsoever in connection therewith. The foregoing may not be altered except by an agreement signed by officers of sellers and manufacturers.

CANADIAN ENGRAVERS SUPPLY CO. LTD.385 Admiral Blvd., #2, Mississauga, ON L5T 2M8

Tel: 905-795-1262 . 877-795-1262 Fax: 905-795-0219 . 800-632-3726

Email: [email protected]

Copyright © 2013 Canadian Engravers Supply Co. Ltd. $4

CANADIAN ENGRAVERS SUPPLY ALBERTA LTD.4730 14th St. N.E. Calgary, AB T2E 6L7Tel: 403-250-6774 . 877-775-6774 Fax: 403-250-7718Email: [email protected]

www.cesco.ca . www.laserstuff.ca CESCO BTF CAT 06 2013

Canadian Engravers Supply Co.

Documents

Transcript of Canadian Engravers Supply Co.