CAMPULSE Camfil Power Systems

Clean air solutions for turbo machinery

Hemipleat® technology combined with high efficiency synthetic media

• Proven open pleat technology reduces pressure loss

• Improved dust release

extends filter life

• High efficiency, non discharging

F9/MERV 16

© C

amfil

Pow

er S

ytst

ems/

EN

/ M

ay 2

016/

As p

art o

f our

con

tinuo

us im

prov

emen

ts, C

amfil

Far

r re

serv

es th

e rig

ht to

cha

nge

spec

ifica

tions

with

out n

otic

e

Technical data Model Media Length x O.D.

mm inchShipping data

m3/ ft3 kg/IbAir flow/Press. loss

m3/h / Pa CFM / ”wgFilter class

CamPulse GTC* Synthetic GTC660 × ø324660 × ø445

26 × ø123/4

26 × ø171/20.15 / 5.3 12.0 / 261/2 2500/142 1470/0.57 F9/MERV 16

CamPulse GTD* Syntethic GTD660 × ø324660 × ø445

26 × ø123/4

26 × ø171/20.15 / 5.3 12.0 / 261/2 2500/160 1470/0.64 F9/MERV 16

0 250 500 750 1000 1250 1500 1750

0,0

0,2

0,4

0,6

0,8

1,0

0,00

50,00

100,00

150,00

200,00

250,00

0 500 1000 1500 2000 2500 3000 m³/h

cfm

Pa “wg

0 250 500 750 1000 1250 1500 1750

0,0

0,2

0,4

0,6

0,8

1,0

0,00

50,00

100,00

150,00

200,00

250,00

0 500 1000 1500 2000 2500 3000 m³/h

cfm

Pa “wg

CAMPULSE GTC

Pressure drop

CAMPULSE GTD

CAMPULSE

www.camfil.com/psFor further information please contact your nearest Camfil office.

Space is moneyCamPulse cylindrical cartridges comes in a double package, two filters in one unit, for optimized storage and half the shipping cost.

End caps Galvanized steel, stainless steel or powder coated Gasket Continuous PU

PleatingHemiPleat® (also available as dimple pleat on request)

Rec. temperature 71ºC / 160ºF Operating82ºC / 180ºF Surge

Liner External helical cords and internal screen secure the filter element from movement without obstruction to the pulse.

CamPulse standard configuration

Cylindrical/Cylindrical for optimum dPAlso available as Cylindrical/Conical

Efficiency standard EN779:2012

ASHRAE 52.2:1999

Tenkay GTC Synthetic GTC 864 × ø362 34 × ø 14¼ 0.14 / 4.95 8.6 / 19 1150/115 680/0.46 F9/MERV 16

Tenkay GTD Syntethic GTD 864 × ø362 34 × ø 14¼ 0.14 / 4.95 8.6 / 19 1150/130 680/0.52 F9/MERV 16

*Available as cylindrical/cylindrical and cylindrical/conical pairs

Camfil – a global leader in air filters and clean air solutions

Camfil is a global leader in the air filtration industry with more than half a century of experience in developing and manufacturing sustainable clean air solutions that protect people, processes and the environment against harmful airborne particles, gases and emissions. These solutions are used globally to benefit human health, increase performance and reduce energy consumption in a wide range of air filtration applications. Our 26 manufacturing plants, six R&D sites, local sales offices and 3,800 employees provide service and support to our customers around the world. Camfil is headquartered in Stockholm, Sweden. Group sales total more than SEK 6 billion per year.

CamPulse GTC_GTC_Tenkay GTC_GTD_April 2016.indd 1,3 5/16/2016 2:22:49 PM

Supplying filtered combustion and ventilation air in harsh environments presents a technical challenge. In addition to the high dust load, there are also industrial contaminants to contend with, such as hydrocarbons, cement, shot-blast sand, dust from construction work etc.

Protection for harsh environmentsThe climate also brings challenges, including salt-laden coastal storms or frequent ground fog. Solid particles, salt and other aggressive contami-nants and aerosols can cause plugging and corrosion, resulting in deteriora-tion in performance, higher operating costs and expensive shutdowns.In high-dust environments, a pulse

filter system is usually the ideal choice, because the self-cleaning process allows for full and continuous operation with low, stable pressure drop. Self-cleaning or pulse filters were originally developed for use in desert or arctic environments where they pulsed off sand particles or snow and ice. Historically these types of filters have been judged on their ability to capture and release coarse particles. This feature is still important, but most installations have other problems to handle, such as daily humidity and fog variations. Some types of particle are hygro-scopic and absorb humidity. Saltis traditionally one of the most difficult particles to filter, due to its ability to

change drastically in size and also to transform from a solid to a liquid. A salt particle can increase five- or sixfold in size purely as a result of humidity. In order to provide the best pos-sible protection and optimize engine performance, the filtration solution must be adapted to the specific site conditions. CamPulse GT is available in three different media options fully compliant with gas turbine manufactu-rers‘ performance specifications.

In situ testing clearly shows that Camfil‘s unique pleating technology, the HemiPleat®, outperforms the competition. The HemiPleat® captures more air pollutants and releases more when pulsed. This results in less fouling and a longer filter life.

Unique pleating technologySynthetic beads hold the pleats further open and the wider spacing in the HemiPleat® design gives greater media utilization and more effective filtration. The HemiPleat® cartridge has been subjected to multiple tests in the lab and in the field. During the tests, the HemiPleat® media showed properties

that greatly enhance the effect of pulse-jet cleaning, together with other desirable characteristics.

• The cartridge has a lower clean media pressure drop for a given airflow.

• It holds a larger volume of dust before requiring cleaning than filters with more tightly packed media.

• It has more available/usable media for filtration.

• Particulate matter is ejected from deep within the pleats during pulsing.

HemiPleat® breathable media pleats

Typical industry packed media pleats

Coarse particle/dryHigh dust concentration in dry rural and industrial

areas.

Semi-AridArid,frequent ground fog, seasonal humidity. Heavy

dust concentration

Urban/industrialHigh dust load and contaminants like

hydrocarbons, cement, blast sand, gypsum

Humid areasInland and coastal

areas. Hot and humid. Agriculture may produce

corrosive dust

Arctic areasCold dry air. Frost and ice fog. Silica. Quartz.

Carbon. Iron. Iron oxide. Sodium

Desert areasArid. Fluctuations in wind speed and dust

concentration.

GTC Synthetic

GTD Synthetic

GTC Synthetic has non-discharging fibre media with unique properties, giving the filter a high level of efficiency over its entire lifetime. The smooth synthetic fibres offer low resistance to airflow and, therefore, maintain a low pressure drop during the life of the filter. The combination of depth-loading coarse fibre media and a nano fiber core is the ideal solution for removing hydroscopic particles in areas of high humidity, such as coastal and wet tropical environments. The GTC option is the preferred choice for most installations.

GTD Synthetic is ideal for areas with high concentration of airborne dust. A layer of nanofibres over the synthetic substrate significantly increases dust collection on the media surface, resulting in improved dust release when pulsed. Pure surface-loading with a high dust-loading capacity media ideal for desert and dry/arid environments.

= First choice for highest performance and filter life time = Recommended for good performance and filter life time = Adequate performance

N.B These recommendations are for comparing Camfil products only. For other products, compare given test data.

Replacement upgrade available for non- camfil inlet systems.

CAMPULSE OFFERS PREMIUM PROTECTION

CHOICEOF MEDIA

FOR ALLENVIRONMENTS

CamPulse GTC_GTC_Tenkay GTC_GTD_April 2016.indd 4-6 5/16/2016 2:22:53 PM

Supplying filtered combustion and ventilation air in harsh environments presents a technical challenge. In addition to the high dust load, there are also industrial contaminants to contend with, such as hydrocarbons, cement, shot-blast sand, dust from construction work etc.

Protection for harsh environmentsThe climate also brings challenges, including salt-laden coastal storms or frequent ground fog. Solid particles, salt and other aggressive contami-nants and aerosols can cause plugging and corrosion, resulting in deteriora-tion in performance, higher operating costs and expensive shutdowns.In high-dust environments, a pulse

filter system is usually the ideal choice, because the self-cleaning process allows for full and continuous operation with low, stable pressure drop. Self-cleaning or pulse filters were originally developed for use in desert or arctic environments where they pulsed off sand particles or snow and ice. Historically these types of filters have been judged on their ability to capture and release coarse particles. This feature is still important, but most installations have other problems to handle, such as daily humidity and fog variations. Some types of particle are hygro-scopic and absorb humidity. Saltis traditionally one of the most difficult particles to filter, due to its ability to

change drastically in size and also to transform from a solid to a liquid. A salt particle can increase five- or sixfold in size purely as a result of humidity. In order to provide the best pos-sible protection and optimize engine performance, the filtration solution must be adapted to the specific site conditions. CamPulse GT is available in three different media options fully compliant with gas turbine manufactu-rers‘ performance specifications.

In situ testing clearly shows that Camfil‘s unique pleating technology, the HemiPleat®, outperforms the competition. The HemiPleat® captures more air pollutants and releases more when pulsed. This results in less fouling and a longer filter life.

Unique pleating technologySynthetic beads hold the pleats further open and the wider spacing in the HemiPleat® design gives greater media utilization and more effective filtration. The HemiPleat® cartridge has been subjected to multiple tests in the lab and in the field. During the tests, the HemiPleat® media showed properties

that greatly enhance the effect of pulse-jet cleaning, together with other desirable characteristics.

• The cartridge has a lower clean media pressure drop for a given airflow.

• It holds a larger volume of dust before requiring cleaning than filters with more tightly packed media.

• It has more available/usable media for filtration.

• Particulate matter is ejected from deep within the pleats during pulsing.

HemiPleat® breathable media pleats

Typical industry packed media pleats

Coarse particle/dryHigh dust concentration in dry rural and industrial

areas.

Semi-AridArid,frequent ground fog, seasonal humidity. Heavy

dust concentration

Urban/industrialHigh dust load and contaminants like

hydrocarbons, cement, blast sand, gypsum

Humid areasInland and coastal

areas. Hot and humid. Agriculture may produce

corrosive dust

Arctic areasCold dry air. Frost and ice fog. Silica. Quartz.

Carbon. Iron. Iron oxide. Sodium

Desert areasArid. Fluctuations in wind speed and dust

concentration.

GTC Synthetic

GTD Synthetic

GTC Synthetic has non-discharging fibre media with unique properties, giving the filter a high level of efficiency over its entire lifetime. The smooth synthetic fibres offer low resistance to airflow and, therefore, maintain a low pressure drop during the life of the filter. The combination of depth-loading coarse fibre media and a nano fiber core is the ideal solution for removing hydroscopic particles in areas of high humidity, such as coastal and wet tropical environments. The GTC option is the preferred choice for most installations.

GTD Synthetic is ideal for areas with high concentration of airborne dust. A layer of nanofibres over the synthetic substrate significantly increases dust collection on the media surface, resulting in improved dust release when pulsed. Pure surface-loading with a high dust-loading capacity media ideal for desert and dry/arid environments.

= First choice for highest performance and filter life time = Recommended for good performance and filter life time = Adequate performance

N.B These recommendations are for comparing Camfil products only. For other products, compare given test data.

Replacement upgrade available for non- camfil inlet systems.

CAMPULSE OFFERS PREMIUM PROTECTION

CHOICEOF MEDIA

FOR ALLENVIRONMENTS

CamPulse GTC_GTC_Tenkay GTC_GTD_April 2016.indd 4-6 5/16/2016 2:22:53 PM

Supplying filtered combustion and ventilation air in harsh environments presents a technical challenge. In addition to the high dust load, there are also industrial contaminants to contend with, such as hydrocarbons, cement, shot-blast sand, dust from construction work etc.

Protection for harsh environmentsThe climate also brings challenges, including salt-laden coastal storms or frequent ground fog. Solid particles, salt and other aggressive contami-nants and aerosols can cause plugging and corrosion, resulting in deteriora-tion in performance, higher operating costs and expensive shutdowns.In high-dust environments, a pulse

filter system is usually the ideal choice, because the self-cleaning process allows for full and continuous operation with low, stable pressure drop. Self-cleaning or pulse filters were originally developed for use in desert or arctic environments where they pulsed off sand particles or snow and ice. Historically these types of filters have been judged on their ability to capture and release coarse particles. This feature is still important, but most installations have other problems to handle, such as daily humidity and fog variations. Some types of particle are hygro-scopic and absorb humidity. Saltis traditionally one of the most difficult particles to filter, due to its ability to

change drastically in size and also to transform from a solid to a liquid. A salt particle can increase five- or sixfold in size purely as a result of humidity. In order to provide the best pos-sible protection and optimize engine performance, the filtration solution must be adapted to the specific site conditions. CamPulse GT is available in three different media options fully compliant with gas turbine manufactu-rers‘ performance specifications.

In situ testing clearly shows that Camfil‘s unique pleating technology, the HemiPleat®, outperforms the competition. The HemiPleat® captures more air pollutants and releases more when pulsed. This results in less fouling and a longer filter life.

Unique pleating technologySynthetic beads hold the pleats further open and the wider spacing in the HemiPleat® design gives greater media utilization and more effective filtration. The HemiPleat® cartridge has been subjected to multiple tests in the lab and in the field. During the tests, the HemiPleat® media showed properties

that greatly enhance the effect of pulse-jet cleaning, together with other desirable characteristics.

• The cartridge has a lower clean media pressure drop for a given airflow.

• It holds a larger volume of dust before requiring cleaning than filters with more tightly packed media.

• It has more available/usable media for filtration.

• Particulate matter is ejected from deep within the pleats during pulsing.

HemiPleat® breathable media pleats

Typical industry packed media pleats

Coarse particle/dryHigh dust concentration in dry rural and industrial

areas.

Semi-AridArid,frequent ground fog, seasonal humidity. Heavy

dust concentration

Urban/industrialHigh dust load and contaminants like

hydrocarbons, cement, blast sand, gypsum

Humid areasInland and coastal

areas. Hot and humid. Agriculture may produce

corrosive dust

Arctic areasCold dry air. Frost and ice fog. Silica. Quartz.

Carbon. Iron. Iron oxide. Sodium

Desert areasArid. Fluctuations in wind speed and dust

concentration.

GTC Synthetic

GTD Synthetic

GTC Synthetic has non-discharging fibre media with unique properties, giving the filter a high level of efficiency over its entire lifetime. The smooth synthetic fibres offer low resistance to airflow and, therefore, maintain a low pressure drop during the life of the filter. The combination of depth-loading coarse fibre media and a nano fiber core is the ideal solution for removing hydroscopic particles in areas of high humidity, such as coastal and wet tropical environments. The GTC option is the preferred choice for most installations.

GTD Synthetic is ideal for areas with high concentration of airborne dust. A layer of nanofibres over the synthetic substrate significantly increases dust collection on the media surface, resulting in improved dust release when pulsed. Pure surface-loading with a high dust-loading capacity media ideal for desert and dry/arid environments.

= First choice for highest performance and filter life time = Recommended for good performance and filter life time = Adequate performance

N.B These recommendations are for comparing Camfil products only. For other products, compare given test data.

Replacement upgrade available for non- camfil inlet systems.

CAMPULSE OFFERS PREMIUM PROTECTION

CHOICEOF MEDIA

FOR ALLENVIRONMENTS

CamPulse GTC_GTC_Tenkay GTC_GTD_April 2016.indd 4-6 5/16/2016 2:22:53 PM

CAMPULSE Camfil Power Systems

Clean air solutions for turbo machinery

Hemipleat® technology combined with high efficiency synthetic media

• Proven open pleat technology reduces pressure loss

• Improved dust release

extends filter life

• High efficiency, non discharging

F9/MERV 16 ©

Cam

fil P

ower

Syt

stem

s/ E

N /

May

201

6/As

par

t of o

ur c

ontin

uous

impr

ovem

ents

, Cam

fil F

arr

rese

rves

the

right

to c

hang

e sp

ecifi

catio

ns w

ithou

t not

ice

Technical data Model Media Length x O.D.

mm inchShipping data

m3/ ft3 kg/IbAir flow/Press. loss

m3/h / Pa CFM / ”wgFilter class

CamPulse GTC* Synthetic GTC660 × ø324660 × ø445

26 × ø123/4

26 × ø171/20.15 / 5.3 12.0 / 261/2 2500/142 1470/0.57 F9/MERV 16

CamPulse GTD* Syntethic GTD660 × ø324660 × ø445

26 × ø123/4

26 × ø171/20.15 / 5.3 12.0 / 261/2 2500/160 1470/0.64 F9/MERV 16

0 250 500 750 1000 1250 1500 1750

0,0

0,2

0,4

0,6

0,8

1,0

0,00

50,00

100,00

150,00

200,00

250,00

0 500 1000 1500 2000 2500 3000 m³/h

cfm

Pa “wg

0 250 500 750 1000 1250 1500 1750

0,0

0,2

0,4

0,6

0,8

1,0

0,00

50,00

100,00

150,00

200,00

250,00

0 500 1000 1500 2000 2500 3000 m³/h

cfm

Pa “wg

CAMPULSE GTC

Pressure drop

CAMPULSE GTD

CAMPULSE

www.camfil.com/psFor further information please contact your nearest Camfil office.

Space is moneyCamPulse cylindrical cartridges comes in a double package, two filters in one unit, for optimized storage and half the shipping cost.

End caps Galvanized steel, stainless steel or powder coated Gasket Continuous PU

PleatingHemiPleat® (also available as dimple pleat on request)

Rec. temperature 71ºC / 160ºF Operating82ºC / 180ºF Surge

Liner External helical cords and internal screen secure the filter element from movement without obstruction to the pulse.

CamPulse standard configuration

Cylindrical/Cylindrical for optimum dPAlso available as Cylindrical/Conical

Efficiency standard EN779:2012

ASHRAE 52.2:1999

Tenkay GTC Synthetic GTC 864 × ø362 34 × ø 14¼ 0.14 / 4.95 8.6 / 19 1150/115 680/0.46 F9/MERV 16

Tenkay GTD Syntethic GTD 864 × ø362 34 × ø 14¼ 0.14 / 4.95 8.6 / 19 1150/130 680/0.52 F9/MERV 16

*Available as cylindrical/cylindrical and cylindrical/conical pairs

Camfil – a global leader in air filters and clean air solutions

Camfil is a global leader in the air filtration industry with more than half a century of experience in developing and manufacturing sustainable clean air solutions that protect people, processes and the environment against harmful airborne particles, gases and emissions. These solutions are used globally to benefit human health, increase performance and reduce energy consumption in a wide range of air filtration applications. Our 26 manufacturing plants, six R&D sites, local sales offices and 3,800 employees provide service and support to our customers around the world. Camfil is headquartered in Stockholm, Sweden. Group sales total more than SEK 6 billion per year.

CamPulse GTC_GTC_Tenkay GTC_GTD_April 2016.indd 1,3 5/16/2016 2:22:49 PM

CAMPULSE Camfil Power Systems

Clean air solutions for turbo machinery

Hemipleat® technology combined with high efficiency synthetic media

• Proven open pleat technology reduces pressure loss

• Improved dust release

extends filter life

• High efficiency, non discharging

F9/MERV 16

© C

amfil

Pow

er S

ytst

ems/

EN

/ M

ay 2

016/

As p

art o

f our

con

tinuo

us im

prov

emen

ts, C

amfil

Far

r re

serv

es th

e rig

ht to

cha

nge

spec

ifica

tions

with

out n

otic

e

Technical data Model Media Length x O.D.

mm inchShipping data

m3/ ft3 kg/IbAir flow/Press. loss

m3/h / Pa CFM / ”wgFilter class

CamPulse GTC* Synthetic GTC660 × ø324660 × ø445

26 × ø123/4

26 × ø171/20.15 / 5.3 12.0 / 261/2 2500/142 1470/0.57 F9/MERV 16

CamPulse GTD* Syntethic GTD660 × ø324660 × ø445

26 × ø123/4

26 × ø171/20.15 / 5.3 12.0 / 261/2 2500/160 1470/0.64 F9/MERV 16

0 250 500 750 1000 1250 1500 1750

0,0

0,2

0,4

0,6

0,8

1,0

0,00

50,00

100,00

150,00

200,00

250,00

0 500 1000 1500 2000 2500 3000 m³/h

cfm

Pa “wg

0 250 500 750 1000 1250 1500 1750

0,0

0,2

0,4

0,6

0,8

1,0

0,00

50,00

100,00

150,00

200,00

250,00

0 500 1000 1500 2000 2500 3000 m³/h

cfm

Pa “wg

CAMPULSE GTC

Pressure drop

CAMPULSE GTD

CAMPULSE

www.camfil.com/psFor further information please contact your nearest Camfil office.

Space is moneyCamPulse cylindrical cartridges comes in a double package, two filters in one unit, for optimized storage and half the shipping cost.

End caps Galvanized steel, stainless steel or powder coated Gasket Continuous PU

PleatingHemiPleat® (also available as dimple pleat on request)

Rec. temperature 71ºC / 160ºF Operating82ºC / 180ºF Surge

Liner External helical cords and internal screen secure the filter element from movement without obstruction to the pulse.

CamPulse standard configuration

Cylindrical/Cylindrical for optimum dPAlso available as Cylindrical/Conical

Efficiency standard EN779:2012

ASHRAE 52.2:1999

Tenkay GTC Synthetic GTC 864 × ø362 34 × ø 14¼ 0.14 / 4.95 8.6 / 19 1150/115 680/0.46 F9/MERV 16

Tenkay GTD Syntethic GTD 864 × ø362 34 × ø 14¼ 0.14 / 4.95 8.6 / 19 1150/130 680/0.52 F9/MERV 16

*Available as cylindrical/cylindrical and cylindrical/conical pairs

Camfil – a global leader in air filters and clean air solutions

Camfil is a global leader in the air filtration industry with more than half a century of experience in developing and manufacturing sustainable clean air solutions that protect people, processes and the environment against harmful airborne particles, gases and emissions. These solutions are used globally to benefit human health, increase performance and reduce energy consumption in a wide range of air filtration applications. Our 26 manufacturing plants, six R&D sites, local sales offices and 3,800 employees provide service and support to our customers around the world. Camfil is headquartered in Stockholm, Sweden. Group sales total more than SEK 6 billion per year.

CamPulse GTC_GTC_Tenkay GTC_GTD_April 2016.indd 1,3 5/16/2016 2:22:49 PM