CAMARO SS (AUTOMATIC) · CAMARO SS (AUTOMATIC) BAFFLED OIL CATCH CAN, PCV SIDE PARTS LIST &...

2
01 PARTS IN CLUDED 1PC Application-Specific Mounting Bracket 1PC Compact Baffled Oil Catch Can 2PC Direct-Fit Hoses with Pre-Installed Factory Quick-Disconnect Fittings 2PC Worm Gear Clamps 2PC 1/2" Aluminum Barbed Fittings Mounting Hardware TOOLS N EEDED 10mm Socket 17mm Wrench 1/4" Drive Ratchet Pick Tool Flat Head Screwdriver 2.5mm Allen Key INSTALL TIME 30 Minutes INSTALL DIFFICULTY DISCLAIMER - Allow vehicle to cool completely prior to attempting installation. - Mishimoto is not responsible for any vehicle damage or personal injury due to installation errors, misuse, or removal of Mishimoto products. - Mishimoto suggests that a trained professional install all Mishimoto products. INSTALL PROCEDURE 1. Remove the bolt that secures the upper radiator support. Pull the upper radiator support off the radiator once free. (1x 10mm bolt) 2. Transfer the bushing on the upper radiator support to the catch can bracket. 3. Slide the bracket onto the radiator. Secure the Mishimoto bracket where the upper radiator support used to be. (1x 10mm bolt) 4. Remove the oil fill cap and remove the engine cover. Replace the oil fill cap before continuing. 5. Disconnect both ends of the PCV hose and remove it. To release the quick-disconnects, slide the gray tab to the side and lift the connector off the port. CONTINUED ON FOLLOWING PAGE MISHIMOTO | 18 BOULDEN CIRCLE, NEW CASTLE, DE 19720 | P 1.877.GOMISHI | WWW.MISHIMOTO.COM 2010?2015 CHEVROLET CAM ARO SS (AUTOM ATIC) BAFFLED OIL CATCH CAN, PCV SIDE PARTS LIST & INSTALLATION GUIDE

Transcript of CAMARO SS (AUTOMATIC) · CAMARO SS (AUTOMATIC) BAFFLED OIL CATCH CAN, PCV SIDE PARTS LIST &...

Page 1: CAMARO SS (AUTOMATIC) · CAMARO SS (AUTOMATIC) BAFFLED OIL CATCH CAN, PCV SIDE PARTS LIST & INSTALLATION GUIDE. 02 6. Connect the longer hose to the back of the engine. Run the hose

01

PARTS INCLUDED1PC Applicat ion-Specif ic Mount ing Bracket1PC Compact Baff led Oil Catch Can2PC Direct -Fit Hoses with Pre-Installed Factory

Quick-Disconnect Fit t ings2PC Worm Gear Clamps2PC 1/2" Aluminum Barbed Fit t ings Mount ing Hardware

TOOLS NEEDED10mm Socket17mm Wrench1/4" Drive RatchetPick ToolFlat Head Screwdriver2.5mm Allen Key

INSTALL TIME 30 Minut es

INSTALL DIFFICULTY

DISCLAIMER

- Allow vehicle to cool completely pr ior to at tempt ing installat ion.

- Mishimoto is not responsible for any vehicle damage or personal injury due to installat ion errors, m isuse, or removal of Mishimoto products.

- Mishimoto suggests that a t rained professional install all Mishimoto products.

INSTALL PROCEDURE1. Remove the bolt that secures the upper radiator

support. Pull the upper radiator support off the radiator once free. (1x 10mm bolt)

2. Transfer the bushing on the upper radiator support to the catch can bracket.

3. Slide the bracket onto the radiator. Secure the Mishimoto bracket where the upper radiator support used to be. (1x 10mm bolt)

4. Remove the oil fill cap and remove the engine cover. Replace the oil fill cap before continuing.

5. Disconnect both ends of the PCV hose and remove it. To release the quick-disconnects, slide the gray tab to the side and lift the connector off the port.

CONTINUED ON FOLLOWING PAGE

MISHIMOTO | 18 BOULDEN CIRCLE, NEW CASTLE, DE 19720 | P 1.877.GOMISHI | WWW.MISHIMOTO.COM

2010?2015 CHEVROLET CAMARO SS (AUTOMATIC)BAFFLED OIL CATCH CAN, PCV SIDEPARTS LIST & INSTALLATION GUIDE

Page 2: CAMARO SS (AUTOMATIC) · CAMARO SS (AUTOMATIC) BAFFLED OIL CATCH CAN, PCV SIDE PARTS LIST & INSTALLATION GUIDE. 02 6. Connect the longer hose to the back of the engine. Run the hose

02

6. Connect the longer hose to the back of the engine. Run the hose up to the catch can bracket.

7. Connect the smaller hose to the open port at the front of the engine.

8. Install the catch can to the bracket. (3x 2.5mm Allen bolts)

9. Attach the fitt ings to the catch can. Snug them down with a 17mm wrench.

10. Connect the hose from the back of the engine to the IN port on the catch can. Then connect the hose from the front of the engine to the OUT port on the catch can. (2x worm gear clamp)

11. Reinstall the engine cover.

Congrat ulat ions! You have f in ished inst all ing t he Mishim ot o 2010?2015 Chevrolet Cam aro SS (Aut om at ic)Baf f led Oil Cat ch Can.

MISHIMOTO | 18 BOULDEN CIRCLE, NEW CASTLE, DE 19720 | P 1.877.GOMISHI | WWW.MISHIMOTO.COM

2010?2015 CHEVROLET CAMARO SS (AUTOMATIC)BAFFLED OIL CATCH CAN, PCV SIDEINSTALLATION GUIDE