Cam and Groove Information - Mavic

Dixon Valve & Coupling Cam & Groove Price List 1-800-355-1991

Cam and Groove Information

"Andrews", "Boss-Lock" and "EZ Boss-Lock" Cam and Groove couplers and adapters areproduced to interchange with all product produced to Mil-C-27487F.No standard exists for the 1/2" and 8" fittings, and generally these sizes do not interchange withother manufacturers.Dust Caps and Dust Plugs are NOT to be used in Pressure Applications for safety andenvironmental reasons.Designed for use with Liquids, consult Dixon for specific recommendations.

Recommendations based on the use of mating Dixon fittings at ambient temperature (70° F)with standard Buna-N Seal installed. For use at elevated temperature or other unusualoperating conditions, consult the factory.

Specifications:SPECIFICATIONS ON OUR CAM AND GROOVE

Pressure Ratings:

"ANDREWS"

Operation of Cam and Groove1. To make connection, simply slide the adapter into

the coupler and with normal hand pressure, pressthe cam levers down.

2. Uncoupling is as quick and simple as coupling.Just lift the cam arms and remove the adapter.

"BOSS-LOCK"

The Cast-in lugs allow safety clips to be attached oncethe lugs are passed through slots in the special camlever arms. These clips prevent the coupler from beingunlocked until they are removed, providing a positivelocking action.

"Boss-Lock" Cam & Groove provides aunique patented safety feature.

Dixon has developed the Pull Ring Safety Clip tosimplify the locking action on "Boss-Lock" couplers.No more inserting clips or dangling lanyards, just atwist and it's locked, giving you a low profile positivelocking action.The Pull Ring Safety Clip will be phased into stock onall "Boss-Lock" couplers as inventory is replaced.

Buy with Confidence"Boss-Lock" Investment StainlessSteel Cam Arms are Guaranteed!!!

Should you ever break a "Boss-Lock" InvestmentStainless Steel Cam Arm, simply return it to thenearest warehouse for a free replacement.

Pull Ring Safety Clips

1/2"150

"Andrews", "Boss-Lock" and "EZ Boss-Lock" Couplers and Adapters Maximum Working Pressure

5" & 6"75

4"100

SizesPSI

3/4"-2"250

2 1/2"150

3"125

4

If coupling is a reducing size, the coupler or adapter isthe first size (i.e. 4030-C is 4 inch coupler to 3 inch hoseshank.)

200 - A - AL - *

Gasket

Material Code

Style Code

Size of coupler or adapter and hoseor pipe end; i.e. = 2 inch size.

ANDREWS ORDERING SYSTEM

1. Precision machined to rigid tolerances.2. Durable stainless steel cam arm pins will not rust or

bind, for greater strength and safety.3. Recess holds gasket firmly in place - assures

proper placement.4. Long shank design allows proper banding thus

eliminating the major cause of hose damage.

2

1 32


TYPE D(female coupler x female NPT)

CAM & GROOVE LINE DRAWINGS"EZ BOSS-LOCK"Cam and Groove Information

TYPE DP *(dust plug)

NOTE: Line drawings are representative of theDixon / "Andrews" line of cam and groove.

* Dust Caps and Dust Plugs are NOT to be used inPressure Applications for safety and environmentalreasons.

No more fumbling with clamps, wire, clips or pins . .Just close the handles and the locking

mechanism is engaged.

Unlike other safety couplings . . .• The EZ Boss-Lock is extremely EASY TO OPEN!!!

The release lever is under your thumb when you wantto open the fitting. ERGONOMIC.

• The EZ Boss-Lock is resistant to accidentaldisconnection when being dragged. The releaselever opens in the direction opposite to the cam arm,so movements that tend to open the release lever alsotend to close the cam arm!!!

• The EZ Boss-Lock alerts you if it is not properlyengaged. If the rotating lever is not flush with thehandle, it is not properly engaged.

• The EZ Boss-Lock has no sliding pins to jam.The EZ Boss-Lock’s rotating action helps keep thelocking device free of debris.

• The EZ Boss-Lock has no sliding pins to popopen. The EZ Boss-Lock is designed to protect criticalparts from impact and to withstand rugged use.

• The EZ Boss-Lock can be supplied with specialshanks custom suited to your needs. The EZBoss-Lock is available with Swaged and PF shankdesigns, for hard to couple chemical hoses.

• The EZ Boss-Lock cam arm assemblies are made ofinvestment cast Stainless Steel with platedCarbon Steel pull rings.

• The EZ Boss-Lock is easier to insert into thehose tubes on Tank Trucks, and easier to use inrestricted spaces. This is due to the smallermaximum O.D. and a more snag free exterior.

• The EZ Boss-Lock Cam Arm assemblies can beretrofitted onto Undamaged Stainless SteelBoss-Lock. This allows you to protect yourinvestment in Stainless Steel Boss-Lock couplingswhile you upgrade.

• The EZ Boss-Lock is Made in the USA.

TYPE A(male adapter x female NPT)

TYPE F(male adapter x male NPT)

TYPE DC *(dust cap)

TYPE C(female coupler x hose shank)

TYPE B(female coupler x male NPT)

3

All measurements in this brochure are for referenceonly and are subject to change. Where dimensionsare critical, please consult the factory. For productsnot shown or special application questions, pleaseconsult the factory.

WARNING:UNDER NO CIRCUMSTANCES

should Cam and Groove couplingsbe used for compressed air

or steam service!

TYPE E(male adapter x hose shank)


Dixon "Andrews" / "Boss-Lock" Type A Adapters4

Male Adapter x Female NPT

---------------

ABC

Overall LengthAdapter LengthDistance Across Flats

ALUMINUM, BRASS and MALLEABLE IRON DIMENSIONS

Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"

8"AND1/2"

8"BL

1 9/1611

1 5/81

1 5/16

1 7/161

1 5/16

1 11/161 5/161 1/2

2 3/161 9/16

2

2 7/321 5/82 9/32

2 19/321 7/8

2 25/32

2 3/41 15/163 1/4

2 3/42

3 7/8

3 1/82 1/16

5

3 17/322 5/165 15/16

3 3/82 1/4

7 3/4*

4 13/163 9/1610 5/8*

4 7/162 1/4

10 5/8*

STAINLESS STEEL DIMENSIONS

ABC


Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"

8"AND1/2"

8"BL

1 9/1611

* Distance Over Lugs.

1 19/321

1 5/16

1 1/21

1 5/16

1 31/321 5/161 1/2

2 3/161 9/16

2

2 3/161 5/82 1/4

2 19/321 7/8

2 11/16

2 11/161 15/163 1/4

2 29/322

3 3/4

3 11/642 1/16

5

3 5/162 5/166 3/4*

3 1/42 1/46 3/4*

---------------

* "Andrews" and "Boss-Lock" Cam and Groove Couplings DO NOT INTERCHANGE IN THE 8" SIZE.• The 8" "Boss-Lock" were designed to interchange with 8" Cam & Groove Couplings manufactured

by P.T. Coupling.

50-A-SS7550-A-SS75-A-SS100-A-SS125-A-SS150-A-SS200-A-SS250-A-SS300-A-SS400-A-SS500-A-SS600-A-SS----------

----------75-A-PM100-A-PM-----150-A-PM200-A-PM250-A-PM300-A-PM400-A-PM-----600-A-PM----------

-------------------------150-A-MI200-A-MI-----300-A-MI400-A-MI500-A-MI---------------

50-A-BR7550-A-BR75-A-BR100-A-BR125-A-BR150-A-BR200-A-BR250-A-BR300-A-BR400-A-BR-----600-A-BR----------

-------------------------150-A-ALH200-A-ALH-----300-A-ALH400-A-ALH-----600-A-ALH----------

50-A-AL7550-A-AL75-A-AL100-A-AL125-A-AL150-A-AL200-A-AL250-A-AL300-A-AL400-A-AL500-A-AL600-A-AL800-A-AL801-A-AL

1/2"3/4" x 1/2"

3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"5"6"

8" AND*8" BL*

AluminumPart #

AluminumHard Coat Brass

Size Part #Part # Part #

UnplatedMalleable Iron

Part #

PlatedMalleable Iron

Part #

StainlessSteel


Dixon "Andrews" / "Boss-Lock" Type E Adapters 5

Male Adapter x Hose Shank


ABC

Overall LengthHose Shank LengthHose Shank O.D.

Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"

8"AND1/2"

2 7/161 7/169/16

2 3/41 5/169/16

32

13/16

4 25/642 43/641 3/64

4 7/82 7/81 5/16

52 15/161 9/16

5 17/323 5/322 1/16

6 1/43 3/4

2 19/32

6 11/164

3 3/32

6 53/644 1/44 3/32

7 15/164 15/165 3/32

8 5/85 1/26 3/32

------------------------


ABC


Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"

8"AND1/2"

2 1/21 7/169/16

2 3/41 5/1619/32

32

27/32

3 13/162 1/21 3/64

4 15/162 13/161 11/32

5 1/162 15/161 9/16

5 5/83 1/42 1/16

6 1/43 3/4

2 19/32

6 7/84 3/163 3/32

7 3/164 1/44 3/32

7 5/324 1/45 3/32

9 13/166 3/46 3/32

11 13/168

8 1/16

8"BL118

8 1/16

50-E-SS7550-E-SS75-E-SS100-E-SS125-E-SS150-E-SS200-E-SS250-E-SS300-E-SS400-E-SS500-E-SS600-E-SS----------

-----7550-E-PM75-E-PM100-E-PM125-E-PM150-E-PM200-E-PM-----300-E-PM400-E-PM-----600-E-PM----------

-------------------------150-E-MI200-E-MI-----300-E-MI400-E-MI--------------------

50-E-BR7550-E-BR75-E-BR100-E-BR125-E-BR150-E-BR200-E-BR250-E-BR300-E-BR400-E-BR-----600-E-BR----------

-------------------------150-E-ALH200-E-ALH-----300-E-ALH400-E-ALH-----600-E-ALH----------

50-E-AL7550-E-AL75-E-AL100-E-AL125-E-AL150-E-AL200-E-AL250-E-AL300-E-AL400-E-AL500-E-AL600-E-AL800-E-AL801-E-AL

1/2"3/4" x 1/2"

3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"5"6"

8" AND*8" BL*

Aluminum

Part #


Size Part #Part # Part #


Part #


Part #

Stainless Steel

* "Andrews" and "Boss-Lock" Cam and Groove Couplings DO NOT INTERCHANGE IN THE 8" SIZE.• The 8" "Boss-Lock" were designed to interchange with 8" Cam & Groove Couplings manufactured by

P.T. Coupling.


Dixon "Andrews" / "Boss-Lock" Type F Adapters6

* Distance Over Lugs

Male Adapter x Male NPT


ABC


Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"

8"AND1/2"

8"BL

2 1/811

2 1/41

1 5/16

2 1/161

1 5/16

2 23/321 5/161 1/2

2 15/161 9/161 7/8

3 1/81 5/82 1/4

3 21/321 7/8

2 11/16

4 5/161 15/163 1/4

4 17/322

3 3/4

4 59/642 1/16

5

------------------

4 15/162 1/47 3/4*

------------------

------------------


ABC


Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"

8"AND1/2"

8"BL

2 1/811

2 7/161

1 5/16

2 1/161

1 3/8

2 3/81 5/161 1/2

2 15/161 9/161 7/8

3 5/321 5/82 1/4

3 17/321 7/8

2 11/16

4 3/81 15/163 1/4

4 15/322

3 3/4

4 21/322 1/16

5

4 1/22 5/166 1/2*

5 17/322 1/4

8 1/32*

6 15/163 9/1610 5/8*

6 3/83 1/1610 5/8*

Part #

50-F-BR7550-F-BR75-F-BR100-F-BR125-F-BR150-F-BR200-F-BR250-F-BR300-F-BR400-F-BR-----600-F-BR----------

50-F-SS7550-F-SS75-F-SS100-F-SS125-F-SS150-F-SS200-F-SS250-F-SS300-F-SS400-F-SS-----600-F-SS----------

1/2"3/4" x 1/2"

3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"5"6"

8" AND*8" BL*

50-F-AL7550-F-AL75-F-AL100-F-AL125-F-AL150-F-AL200-F-AL250-F-AL300-F-AL400-F-AL500-F-AL600-F-AL800-F-AL801-F-AL

-------------------------150-F-ALH200-F-ALH-----300-F-ALH400-F-ALH-----600-F-ALH----------

AluminumAluminumHard Coat Brass

----------75-F-PM100-F-PM-----150-F-PM200-F-PM250-F-PM300-F-PM400-F-PM-----600-F-PM----------

-------------------------150-F-MI200-F-MI-----300-F-MI400-F-MI--------------------

Part #


Part #


Part #

Stainless Steel

Part #Size Part #

* "Andrews" and "Boss-Lock" Cam and Groove Couplings DO NOT INTERCHANGE IN THE 8" SIZE.• The 8" "Boss-Lock" were designed to interchange with 8" Cam & Groove Couplings manufactured by

P.T. Coupling.


Dust caps and Dust Plugs are NOT to be used in Pressure Applications for safety and environmental reasons.

Dixon "Andrews" / "Boss-Lock" Type DP Dust Plug 7

Dust Plug


ABC

Overall LengthAdapter LengthOutside O.D.

Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"8"

AND1/2"

1 1/41

1 1/4

1 1/41

1 1/4

1 11/321 5/161 7/16

21 9/161 25/32

2 1/21 5/82 3/32

2 3/41 7/8

2 31/64

2 7/81 15/162 63/64

2 27/322

3 19/32

3 1/82 1/164 45/64

------------------

3 3/82 1/4

6 59/64

------------------

8"BL------------------


ABC

Overall LengthAdapter LengthOutside O.D.

Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"8"

AND1/2"

1 1/41

1 1/4

1 1/41

1 1/4

1 11/321 5/161 7/16

2 3/81 9/161 25/32

2 13/321 5/82 3/32

2 7/81 7/8

2 31/64

2 9/161 15/162 63/64

2 13/162

3 19/32

3 1/162 1/164 45/64

3 11/162 5/165 47/64

3 3/162 1/4

6 59/64

5 1/43 1/49 7/64

8"BL

4 1/22 3/4

8 59/64

----------100-DP-PM125-DP-PM150-DP-PM200-DP-PM250-DP-PM300-DP-PM400-DP-PM--------------------

50-DP-BR75-DP-BR100-DP-BR125-DP-BR150-DP-BR200-DP-BR250-DP-BR300-DP-BR400-DP-BR-----600-DP-BR----------

---------------125-DP-MI150-DP-MI200-DP-MI-----300-DP-MI400-DP-MI--------------------

50-DP-AL75-DP-AL100-DP-AL125-DP-AL150-DP-AL200-DP-AL250-DP-AL300-DP-AL400-DP-AL500-DP-AL600-DP-AL800-DP-AL801-DP-AL

--------------------150-DP-ALH200-DP-ALH-----300-DP-ALH400-DP-ALH-----600-DP-ALH----------

AluminumAluminumHard Coat Brass

1/2"3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"5"6"

8" AND*8" BL*

Part #Size Part #Part #

50-DP-SS75-DP-SS100-DP-SS125-DP-SS150-DP-SS200-DP-SS250-DP-SS300-DP-SS400-DP-SS-----600-DP-SS----------


PlatedMalleable Iron Stainless Steel

Part # Part #Part #

* "Andrews" and "Boss-Lock" Cam and Groove Couplings DO NOT INTERCHANGE IN THE 8" SIZE.• The 8" "Boss-Lock" were designed to interchange with 8" Cam & Groove Couplings manufactured

by P.T. Coupling.


Dixon "Andrews" Type C Couplers8


--------------------150-C-MI200-C-MI-----300-C-MI400-C-MI---------------

50-C-SS75-C-SS100-C-SS125-C-SS150-C-SS200-C-SS250-C-SS300-C-SS400-C-SS500-C-SS600-C-SS-----

Stainless Steel

Part # Part #

1/2"3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"5"6"

8" *

50-C-AL75-C-AL100-C-AL-----150-C-AL200-C-AL-----300-C-AL400-C-AL500-C-AL600-C-AL800-C-AL

Aluminum

Part #


Size

--------------------150-C-ALH200-C-ALH-----300-C-ALH400-C-ALH-----600-C-ALH-----

Part # Part #

50-C-BR75-C-BR100-C-BR-----150-C-BR200-C-BR-----300-C-BR400-C-BR-----600-C-BR-----

* "Andrews" and "Boss-Lock" Cam and GrooveCouplings DO NOT INTERCHANGE IN THE8" SIZE.

• See "Boss-Lock" for 1 1/4" and 2 1/2" couplers.• The 8" "Andrews" design has 4 cam arms. 1/2"

Andrews has only one cam arm.• Finger rings are not supplied on 1/2" - 1"

"Andrews" couplings.


ABCDE

Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam ArmsHose Shank O.D.

Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"

2 21/321 7/321 17/322 11/16

9/16

3 3/41 1/42 1/84 3/813/16

4 7/321 19/322 7/165 3/161 3/64

4 41/641 59/643 1/47 5/321 5/16

4 25/321 7/83 9/167 7/161 9/16

5 19/322 11/323 15/167 13/162 1/16

------------------------------

6 1/22 5/165 15/3210 3/323 3/32

6 9/162 5/166 9/1611 3/164 3/32

6 9/162 5/167 9/1612 3/165 3/32

9 3/82 5/8

10 3/3216 1/46 3/32

11 13/163 13/1612 1/3219 31/328 1/16


ABCDE


Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6"

3 1/41 1/4

1 17/322 11/16

9/16

3 11/161 1/42 1/84 3/813/16

4 1/41 9/162 7/165 3/161 3/64

4 41/641 29/323 1/47 5/321 5/16

4 27/321 29/323 9/167 7/161 9/16

5 3/82 7/323 15/167 13/162 1/16

62 1/44 7/168 11/322 19/32

6 3/82 3/8

5 15/3210 3/323 3/32

6 17/322 9/326 9/1611 3/164 3/32

7 3/82 7/167 9/1612 3/165 3/32

8 3/322 19/3210 3/3216 1/46 3/32

Female Coupler x Hose Shank


"Boss-Lock" Type C Couplers 9

-----IC075IC100-----IC150IC200-----IC300IC400IC600-----

RC050BLRC075BLRC100BLRC125BLRC150BLRC200BL-----RC300BLRC400BL----------


Part # Part #

3/4" 1/2"3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"6"

8" *

-----AC075AC100AC125AC150AC200AC250AC300AC400AC600AC800

-----BC075BC100BC125BC150BC200BC250BC300BC400BC600-----

Aluminum

Part #

Brass

Size Part #

* "Andrews" and "Boss-Lock" Cam andGroove Couplings DO NOTINTERCHANGE IN THE 8" SIZE.

• The 8" "Boss-Lock" design has 2 camarms.

• All "Boss-Lock" Couplers come withSAFETY CLIPS.

• The 8" "Boss-Lock" were designed tointerchange with 8" Cam & GrooveCouplings manufactured by P.T.Coupling.


ABCDE


Overall LengthCoupler LengthDistance Across Safety LugsDistance Across Open Cam ArmsHose Shank O.D.

Size3/4 x1/2"

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"

------------------------------

4 25/641 33/642 19/325 13/3213/16

4 57/641 35/642 29/325 9/161 3/64

5 7/162 3/323 39/647 15/321 5/16

4 29/322 5/323 29/327 25/321 9/16

5 19/322 7/324 5/168 5/322 1/16

6 1/162 1/4

4 13/168 21/322 19/32

6 19/642 19/645 9/169 29/323 3/32

6 9/162 5/166 11/16

114 3/32

8 3/82 5/89 5/8

16 5/326 3/32

11 13/162 13/1611 5/8

18 11/648 1/16

------------------------------


ABCDE

Overall LengthCoupler LengthDistance Across Safety LugsDistance Across Open Cam ArmsHose Shank O.D.

Size3/4 x1/2"

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"

3 7/641 27/642 25/325 13/32

9/16

3 7/81 7/162 25/325 13/3213/16

4 17/321 9/162 29/325 9/161 3/64

5 7/162 3/323 39/647 15/321 5/16

4 27/322 5/323 29/327 25/321 9/16

52 3/164 5/168 5/322 1/16

-------------------------

6 9/322 9/325 9/169 29/323 3/32

7 3/82 5/166 11/16

114 3/32

------------------------------

------------------------------

------------------------------


"EZ Boss-Lock" Type C Couplers10


• The 8" "EZ Boss-Lock" design has 2 cam arms.• UNDER NO CIRCUMSTANCES should the

"EZ Boss-Lock" cam arms be used on anyfitting not specifically produced for their use.

• The "EZ Boss-Lock" cam arms CANNOT beretrofitted onto existing Aluminum,Brass or Plated Malleable Iron Boss-Lockalready in service.



6 1/162 1/45 3/328 21/322 19/32

ABCDE


Size 3/4 x 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"

3 7/641 27/643 3/326 7/329/16

4 25/641 33/643 3/326 7/3213/16

5 7/162 3/323 29/327 15/321 5/16

4 57/641 35/643 1/46 3/81 3/64

4 29/322 5/324 7/327 25/321 9/16

5 19/322 7/324 19/328 5/322 1/16

6 19/642 19/645 23/329 29/323 3/32

6 9/162 5/166 27/32

114 3/32

8 3/82 5/8

10 1/3216 25/326 3/32

11 13/162 13/1612 1/3218 25/328 1/16


------------------------------

ABCDE


Size 3/4 x 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"

3 7/641 27/643 3/325 13/32

9/16

3 7/81 7/163 3/325 13/3213/16

5 7/162 3/323 29/327 15/321 5/16

4 17/321 9/163 1/45 9/161 3/64

4 27/322 5/324 7/327 25/321 9/16

52 3/164 19/328 5/322 1/16

6 9/322 9/325 23/329 29/323 3/32

7 3/82 5/166 27/32

114 3/32

8 3/322 19/3210 1/3216 5/326 3/32

------------------------------

RC050EZRC075EZRC100EZRC125EZRC150EZRC200EZ-----RC300EZRC400EZRC600EZ-----

Stainless Steel

Part #

-----BC075EZBC100EZBC125EZBC150EZBC200EZBC250EZBC300EZBC400EZ----------

1/2"3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"6"

8" *

-----AC075EZAC100EZ-----AC150EZAC200EZAC250EZAC300EZAC400EZAC600EZAC800EZ

Part #Size Part #

Aluminum Brass


Dixon "Andrews" Type D Couplers 11

* "Andrews" and "Boss-Lock" Cam andGroove Couplings DO NOTINTERCHANGE IN THE 8" SIZE. The8" "Andrews" design has 4 cam arms.

• See "Boss-Lock" for 1 1/4" and 2 1/2"couplers.

• Finger rings are not supplied on 1/2" - 1""Andrews" couplings.

• 1/2" Andrews has only one cam arm.

* Distance Across Lugs.


2 9/161 9/162 7/165 3/161 19/32

ABCDE

Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam ArmsDistance Across Flats

Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"2

1 7/321 17/322 11/161 1/16

2 5/321 3/82 1/84 3/81 9/32

2 27/321 15/163 1/47 5/32

2

2 7/81 27/323 9/167 7/162 3/16

2 27/321 15/163 1/47 5/322 5/8

------------------------------

3 15/162 5/166 9/1611 3/165 1/16

3 11/162 3/8

5 15/3210 3/323 7/8

3 3/42 5/167 9/1612 3/16

6*

4 11/322 5/8

10 3/3216 1/4

7 25/32*

64 1/4

12 1/3219 3/3210 3/4*


2 1/21 9/162 7/165 3/161 5/8

ABCDE


Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"1 7/81 1/4

1 17/322 11/161 1/16

2 1/161 1/42 1/84 3/81 5/16

2 27/321 15/163 1/47 5/32

2

2 27/321 29/323 9/167 7/162 3/16

3 13/642 7/323 15/167 13/162 11/16

3 7/162 1/44 7/168 11/323 5/16

3 47/642 21/646 9/1611 3/164 7/8

3 19/322 9/325 15/3210 3/323 3/4

4 1/162 7/167 9/16

12 13/166 13/32*

4 1/162 19/3210 3/3216 1/47 5/8*

------------------------------

Female Coupler x Female NPT

--------------------150-D-MI200-D-MI-----300-D-MI400-D-MI500-D-MI----------

--------------------150-D-ALH200-D-ALH-----300-D-ALH400-D-ALH-----600-D-ALH-----

50-D-SS75-D-SS100-D-SS125-D-SS150-D-SS200-D-SS250-D-SS300-D-SS400-D-SS500-D-SS600-D-SS-----

50-D-BR75-D-BR100-D-BR-----150-D-BR200-D-BR-----300-D-BR400-D-BR500-D-BR600-D-BR-----

1/2"3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"5"6"

8" *

Aluminum

Part #


Size Part # Part #

50-D-AL75-D-AL100-D-AL-----150-D-AL200-D-AL-----300-D-AL400-D-AL500-D-AL600-D-AL800-D-AL

UnplatedMalleable Iron Stainless Steel

Part # Part #


"Boss-Lock" Type D Couplers12


• The 8" "Boss-Lock" design has 2cam arms.


• The 8" "Boss-Lock" were designed tointerchange with 8" Cam & GrooveCouplings manufactured by P.T.Coupling.


Overall LengthCoupler LengthDistance Across Safety LugsDistance Across Open Cam ArmsDistance Across Flats

* Distance Across Lugs.


ABCDE

Size 3/4 x1/2"

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

21 27/642 25/325 13/321 3/16

2 1/641 7/16

2 25/325 13/32

1 3/8

2 1/21 9/16

2 29/325 9/161 5/8

3 3/322 3/32

3 39/647 15/32

2

2 27/322 5/32

3 29/327 25/322 3/16

3 3/162 3/164 5/168 5/322 11/16

------------------------------

3 19/322 9/325 9/16

9 55/643 3/4

3 13/162 5/165 11/16

115 3/16

------------------------------

------------------------------

------------------------------


ABCDE

Overall LengthCoupler LengthDistance Across Safety LugsDistance Across Open Cam ArmsDistance Across Flats

Size 3/4 x1/2"

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

21 27/642 19/325 13/321 3/16

2 15/641 33/642 19/325 13/32

1 3/8

2 35/641 35/642 29/325 9/161 5/8

3 3/322 3/32

3 39/647 15/32

2

3 7/322 3/32

3 29/327 25/322 9/32

3 1/42 7/324 5/168 5/322 5/8

3 11/162 1/4

4 13/168 21/323 5/16

3 55/642 19/645 9/16

9 29/323 7/8

3 13/162 5/166 11/16

114 7/8

3 15/162 5/16

7 25/3212 1/32

6

4 5/82 5/89 5/8

16 5/328 5/32*

4 1/22 13/1611 5/8

18 11/649 7/8*

Plated Malleable Iron Stainless Steel

Part # Part #

RD050BLRD075BLRD100BLRD125BLRD150BLRD200BL-----RD300BLRD400BL---------------

-----ID075ID100-----ID150ID200-----ID300ID400-----ID600-----

3/4" x 1/2"3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"5"6"

8" *

Aluminum

Part #

Brass

Size Part #

AD050AD075AD100AD125AD150AD200AD250AD300AD400AD500AD600AD800

BD050BD075BD100BD125BD150BD200BD250BD300BD400-----BD600-----


"EZ Boss-Lock" Type D Couplers 13

UNDER NO CIRCUMSTANCES should the "EZ Boss-Lock"cam arms be used on any fitting notspecifically produced for their use.The Aluminum, Brass and Malleable Iron are made from sandcastings. To insure proper functioning of the "EZ Boss-Lock"cam arm assemblies, we sort the castings to insure there issufficient length and orientation on the lugs on the main castingto engage the lever. We also buff or grind the rougher sand castsurface to insure that the lever will move freely.The "EZ Boss-Lock" cam arms CANNOT be retrofitted ontoexisting Aluminum, Brass or Plated Malleable Iron Boss-Lock already in service.

* "Andrews" and "Boss-Lock" Cam and Groove CouplingsDO NOT INTERCHANGE IN THE 8" SIZE.

• The 8" "EZ Boss-Lock" design has 2 cam arms.



ABCDE


Size3/4 x1/2"

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

------------------------------

2 15/641 33/643 3/326 7/321 3/8

2 35/641 35/64

3 1/46 3/81 5/8

3 3/322 3/32

3 29/327 15/32

2

3 7/322 3/324 7/32

7 25/322 9/32

3 1/42 7/32

4 19/328 5/322 5/8

3 11/162 1/4

5 3/328 21/323 5/16

3 55/642 19/645 23/329 29/32

3 7/8

3 13/162 5/16

6 27/3211

4 7/8

3 15/162 5/167 7/8

12 1/166

4 5/82 5/8

10 1/3216 25/328 5/32*

4 1/22 13/1612 1/32

18 25/329 7/8*


* Distance Across Lugs

ABCDE


Size3/4 x1/2"

3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

21 27/643 3/326 7/321 3/16

2 1/641 7/163 3/326 7/321 3/8

2 1/21 9/163 1/46 3/81 5/8

3 3/322 3/32

3 29/327 15/32

2

2 27/322 5/324 7/32

7 25/322 3/16

3 3/162 3/16

4 19/328 5/322 11/16

------------------------------

3 19/322 9/32

5 23/329 29/329 55/64

3 13/162 5/16

6 27/3211

5 3/16

4 1/162 19/3210 1/32

16 25/327 5/8*

------------------------------

------------------------------

Stainless Steel

RD050EZRD075EZRD100EZRD125EZRD150EZRD200EZ-----RD300EZRD400EZ-----RD600EZ-----

3/4" x 1/2"3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"5"6"

8" *

Part #Size Part #

Aluminum Brass

-----BD075EZBD100EZBD125EZBD150EZBD200EZBD250EZBD300EZBD400EZ---------------

-----AD075EZAD100EZ-----AD150EZAD200EZAD250EZAD300EZAD400EZAD500EZAD600EZAD800EZ

Part #


Dixon "Andrews" Type B Couplers14

* "Andrews" and "Boss-Lock" Cam andGroove Couplings DO NOT INTERCHANGE IN THE 8" SIZE.

• See "Boss-Lock" for 1 1/4" and 2 1/2"couplers.

• The 8" "Andrews" design has 4 cam arms.• Finger rings are not supplied on 1/2" - 1"

"Andrews" couplings.• 1/2" Andrews has only one cam arm.


ABCD

Overall LengthCoupler LengthDistance Across Closed Cam ArmsDistance Across Open Cam Arms

Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"1 7/81 1/4

1 17/322 11/16

2 1/81 1/42 1/84 3/8

2 9/161 9/162 7/165 3/16

2 27/321 29/32

3 1/47 5/32

2 31/321 29/323 9/167 7/16

3 9/322 7/32

3 15/167 13/16

------------------------

3 59/642 9/32

5 15/3210 3/32

3 7/162 1/4

4 7/168 11/32

4 1/642 9/326 9/1611 3/16

------------------------

4 35/642 19/3210 3/3216 1/4


ABCD


Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"2

1 7/321 17/322 11/16

2 3/161 3/82 1/84 3/8

2 17/321 19/322 7/165 3/16

2 7/81 31/323 1/47 5/32

2 13/161 29/323 9/167 7/16

3 9/322 7/323 15/167 13/16

4 3/162 5/167 9/1612 3/16

3 15/162 15/165 15/3210 3/32

------------------------

4 1/322 11/326 9/1611 3/16

8 7/163 13/1612 1/3219 31/32

4 7/162 5/8

10 3/3216 1/4

Female Coupler x Male NPT

---------------150-B-ALH200-B-ALH-----300-B-ALH400-B-ALH-----600-B-ALH-----


Part # Part #

50-B-SS75-B-SS100-B-SS150-B-SS200-B-SS250-B-SS300-B-SS400-B-SS600-B-SS----------

---------------150-B-MI200-B-MI----------300-B-MI400-B-MI----------

1/2"3/4"1"

1 1/2"2"

2 1/2"3"4"5"6"

8" *

Aluminum

Part #


Size Part # Part #

50-B-AL75-B-AL100-B-AL150-B-AL200-B-AL-----300-B-AL400-B-AL500-B-AL600-B-AL800-B-AL

50-B-BR75-B-BR100-B-BR150-B-BR200-B-BR-----300-B-BR400-B-BR---------------


"Boss-Lock" Type B Couplers 15

* "Andrews" and "Boss-Lock" Camand Groove Couplings DO NOTINTERCHANGE IN THE 8" SIZE.

• The 8" "Boss-Lock" design has 2cam arms.


• The 8" "Boss-Lock" were designedto interchange with 8" Cam &Groove Couplings manufactured byP.T. Coupling.



ABCD

Overall LengthCoupler LengthDistance Across Safety LugsDistance Across Open Cam Arms

Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

2 15/641 27/642 19/325 13/32

2 5/161 33/642 19/325 13/32

2 35/641 35/642 29/325 9/16

3 5/322 3/323 39/327 15/32

3 5/322 3/323 29/327 25/32

3 9/321 27/644 5/165 13/32

3 7/82 1/4

4 13/168 21/32

42 5/165 9/169 55/64

4 1/162 5/166 11/16

11

------------------------

4 23/322 19/329 5/8

16 5/32

7 1/82 13/1611 5/8

18 11/64


ABCD


Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

2 19/641 27/642 25/325 13/32

2 5/161 33/642 25/325 13/32

2 9/161 35/642 29/325 9/16

3 3/162 3/323 39/647 15/32

3 7/322 3/323 29/327 25/32

3 9/322 7/324 5/168 5/32

------------------------

3 59/642 9/325 9/169 29/32

4 1/162 5/166 11/16

11

------------------------

------------------------

------------------------


Part # Part #RB050BLRB075BLRB100BLRB125BLRB150BLRB200BL-----RB300BLRB400BL---------------

IB050IB075IB100-----IB150IB200-----IB300IB400---------------

3/4" x 1/2"3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"5"6"

8" *

Aluminum

Part #

Brass

Size Part #AB050AB075AB100AB125AB150AB200AB250AB300AB400-----AB600AB800

BB050BB075BB100BB125BB150BB200BB250BB300BB400-----BB600-----


Dixon "EZ Boss-Lock" Type B Couplers16

UNDER NO CIRCUMSTANCES should the"EZ Boss-Lock" cam arms be used on any fittingnot specifically produced for their use.The Aluminum, Brass and Malleable Iron are madefrom sand castings. To insure proper functioning of the"EZ Boss-Lock" cam arm assemblies, we sort thecastings to insure there is sufficient length andorientation on the lugs on the main casting to engagethe lever. We also buff or grind the rougher sand castsurface to insure that the lever will move freely.The "EZ Boss-Lock" cam arms CANNOT beretrofitted onto existing Aluminum, Brass orPlated Malleable Iron Boss-Lock already inservice.



ABCD


Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

------------------------

2 5/161 33/643 3/326 7/32

2 9/161 9/163 1/46 3/8

3 3/162 3/32

3 29/327 15/32

3 5/322 3/324 7/32

7 25/32

3 9/322 7/32

4 19/328 5/32

------------------------

42 5/16

5 23/329 29/32

4 1/162 5/16

6 27/3211

------------------------

------------------------

4 23/322 19/3210 1/32

16 25/32


ABCD


Size3/4 x1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"

2 19/641 27/643 3/326 7/32

2 1/41 19/643 3/326 7/32

2 9/161 9/163 1/46 3/8

3 3/162 3/323 29/327 15/32

3 7/322 5/324 7/327 25/32

3 1/42 3/164 19/328 5/32

------------------------

3 59/642 9/325 23/329 29/32

4 1/162 5/166 27/32

11

------------------------

------------------------

4 35/642 19/3210 1/3216 25/32

RB050EZRB075EZRB100EZRB125EZRB150EZRB200EZRB300EZRB400EZRB600EZ

Stainless Steel

Part #

3/4" x 1/2"3/4"1"

1 1/4"1 1/2"

2"3"4"6"

Part #Size Part #

Aluminum Brass

-----BB075EZBB100EZBB125EZBB150EZBB200EZBB300EZBB400EZ-----

---------------AB100EZAB150EZAB200EZAB300EZAB400EZAB600EZ


Dixon "Andrews" Type DC Dust Cap 17

Dust Caps and Dust Plugs are NOT to be used in Pressure Applications for safety and environmental reasons.

* "Andrews" and "Boss-Lock" Cam and GrooveCouplings DO NOT INTERCHANGE IN THE8" SIZE.

** See "Boss-Lock" for 1 1/4" and 2 1/2" couplers.• The 8" "Andrews" Dust Cap has 2 cam arms,

unlike the Andrews Type D, which has 4.• Finger rings are not supplied on 1/2" - 1"

"Andrews" couplings.• 1/2" Andrews has only one cam arm.


ABCD


Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"

1 3/41 1/4

1 17/322 11/16

1 3/41 1/42 1/84 3/8

2 3/161 9/162 7/165 3/16

2 13/161 29/323 9/167 7/16

------------------------

3 3/322 7/323 15/167 13/16

3 1/162 1/44 7/168 11/32

3 1/82 9/325 15/3210 3/32

3 3/42 19/3210 3/3216 1/4

3 3/82 7/167 9/16

12 3/16

3 35/642 9/326 9/1611 3/16

------------------------


ABCD


Size 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8"

1 13/161 1/4

1 17/322 11/16

2 1/161 3/82 1/84 3/8

2 11/321 21/322 7/165 3/16

2 23/321 7/83 9/167 7/16

2 9/162

3 1/47 5/32

3 1/642 7/323 15/167 13/16

------------------------

3 1/82 1/4

5 15/3210 3/32

3 13/162 5/8

10 3/3216 1/4

3 1/22 5/167 9/1612 3/16

3 21/322 5/166 9/1611 3/16

5 7/163 13/1612 1/3219 31/32

Type DC Dust Cap

---------------150-DC-ALH200-DC-ALH300-DC-ALH400-DC-ALH-----600-DC-ALH-----


Part # Part #

50-DC-SS75-DC-SS100-DC-SS150-DC-SS200-DC-SS250-DC-SS300-DC-SS400-DC-SS500-DC-SS600-DC-SS

--------------------200-DC-MI-----300-DC-MI400-DC-MI----------

1/2"3/4"1"

1 1/2"2"3"4"5"6"

8" *

Aluminum

Part #


Size Part # Part #

50-DC-AL75-DC-AL100-DC-AL150-DC-AL200-DC-AL300-DC-AL400-DC-AL500-DC-AL600-DC-AL800-DC-AL

50-DC-BR75-DC-BR100-DC-BR150-DC-BR200-DC-BR300-DC-BR400-DC-BR500-DC-BR----------


Dixon "Boss-Lock" Type H Dust Cap18



• The 8" "Boss-Lock" design has 2 cam arms.• All "Boss-Lock" Couplers come with SAFETY

CLIPS.• The 8" "Boss-Lock" were designed to inter

change with 8" Cam & Groove Couplingsmanufactured by P.T. Coupling.

Type H Dust Cap


ABCD


Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"2 1/161 31/642 19/325 13/32

2 7/321 9/162 29/325 9/16

2 3/42 3/323 39/647 15/32

2 15/162 3/323 29/327 25/32

3 1/162 3/164 5/168 5/32

3 7/322 1/4

4 13/168 21/32

3 3/82 5/166 11/16

11

3 1/82 19/645 9/169 29/32

------------------------

3 7/82 19/329 5/8

16 5/32

4 9/162 13/1611 5/8

18 11/64


ABCD


Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6" 8"5"1 15/161 7/162 25/325 13/32

2 3/161 9/162 29/325 9/16

2 3/42 3/323 39/647 15/32

2 13/162 5/323 29/327 25/32

3 1/162 3/164 5/168 5/32

------------------------

3 3/82 5/166 11/16

11

3 1/82 9/325 9/169 29/32

------------------------

------------------------

------------------------


Part # Part #

RH075BLRH100BLRH125BLRH150BLRH200BL-----RH300BLRH400BL----------

IH075IH100-----IH150IH200IH250IH300IH400IH600-----

3/4"1"

1 1/4"1 1/2"

2"2 1/2"

3"4"6"

8" *

Aluminum

Part #

Brass

Size Part #

AH075AH100AH125AH150AH200AH250AH300AH400AH600AH800

BH075BH100BH125BH150BH200BH250BH300BH400BH600----

Stainless Steel


Dixon "EZ Boss-Lock" Type H Dust Cap 19


UNDER NO CIRCUMSTANCES should the"EZ Boss-Lock" cam arms be used on anyfitting not specifically produced for theiruse.The Aluminum, Brass and Malleable Iron are made fromsand castings. To insure proper functioning of the "EZBoss-Lock" cam arm assemblies, we sort the castings toinsure there is sufficient length and orientation on thelugs on the main casting to engage the lever. We alsobuff or grind the rougher sand cast surface to insure thatthe lever will move freely.The "EZ Boss-Lock" cam arms CANNOT be retrofit-ted onto existing Aluminum, Brass or Plated Mal-leable Iron Boss-Lock already in service.

Dust Cap


ABCD


Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6"

1 15/161 7/163 3/325 13/32

2 3/161 9/163 1/45 9/16

2 3/42 3/323 29/327 15/32

2 13/162 5/324 7/327 25/32

3 1/162 3/164 19/328 5/32

------------------------

3 1/82 9/325 23/329 29/32

3 3/82 5/166 27/32

11

3 3/42 19/3210 1/3216 5/32


ABCD


Size 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 6"

2 1/161 31/643 3/326 7/32

2 7/321 9/163 1/46 3/8

------------------------

2 15/162 3/324 7/327 25/32

3 1/162 3/164 19/328 5/32

3 7/322 1/45 3/328 21/32

3 1/82 19/645 23/329 29/32

3 3/82 5/166 27/32

11

3 7/82 19/3210 1/3216 25/32

Stainless Steel

RH075EZRH100EZRH125EZRH150EZRH200EZ-----RH300EZRH400EZRH600EZ

3/4"1"

1 1/4"1 1/2"

2"2 1/2”

3"4"6"

Part #Size Part #Part #

Aluminum Brass

-----AH100EZ-----AH150EZAH200EZAH250EZAH300EZAH400EZAH600EZ

BH075EZBH100EZ-----BH150EZBH200EZ-----BH300EZBH400EZ-----


Swaged "EZ Boss-Lock" Type C Couplers20

Developed specifically for chemical transport hoses having Crosslinked Polyethylene (XLPE) orUltra High Molecular Weight Polyethylene (UHMW) tubes. Swaged "Boss-Lock" provides youwith a permanently attached Cam and Groove fitting when superior coupling retention is required.In testing tank transport hoses from a wide variety of manufacturers, the Swaged "Boss-Lock" fittingproved itself to be the clear winner in overall performance.Fittings are also available on special order for other sizes or hose O.D.'s. Consult the Factoryfor pricing and availability.Consult the Factory for pricing and availability of the special equipment required forinstallation.

The largest advantage of the Notched "EZ Boss-Lock"design is that the coupling can be removed from a damagedhose by cutting away the ferrule, without necessarilydamaging the fitting. After inspection to determine itssuitability for reuse, it can be reinstalled into another hoseby using a new ferrule.

The Notched EZ "Boss-Lock" system allows you to bettermanage your inventories. You can stock one coupling andtwo ferrules, and thereby cover the same hose range withless inventory. You must purchase a fitting and thematching ferrule to create an assembly.

Dixon stems and ferrules are specifically designed to beused together as a coupling system. Due to differencesin dimensions and tolerances for safety reasons, do notuse other manufacture's stems or ferrules with DixonCam and Groove or Holedall products.

Coupler x Hose Shankwith Ferrule

Notched "EZ Boss-Lock" Type C Couplers

ABCDE



Size 1 1/2" 2" 3" 4"

5 7/162 5/324 7/32

7 25/321 9/16

5 11/322 3/16

4 19/328 5/322 1/16

6 19/322 9/32

5 23/329 29/323 3/32

7 3/82 5/16

6 27/3211

4 3/32

Size

3/4"1"1"

Maximum Hose O.D.

1 22/64"1 35/64"1 11/16"

RC075EZ-70RC100EZ-20RC100EZ-70

Stainless Steel Part #

1 6/64"1 29/64"1 9/16"

Minimum Hose O.D.

Coupler x Hose Shank

Ferrule

RC150EZNORC150EZNORC200EZNORC200EZNORC300EZNORC300EZNORC400EZNO

1 1/2"1 1/2"

2"2"3"3"4"

MaximumHose O.D.

StainlessSteel Part #

Stainless SteelNotched Ferrule Part #

Size

1 15/16"2 1/16"2 15/32"2 21/32"3 15/32"3 47/64"4 5/8"

MinimumHose O.D.

2 3/16"2 11/32"2 11/16"2 27/32"3 23/32"3 27/32"4 47/64"

GAS2334NOGAS2370NOGAS2709NOGAS2885NOGAS3760NOGAS3885NOGAS5010NO


Swaged "Boss-Lock" Type E Adapters 21

Contact the Factory for swage and crimp recommendations.

Developed specifically for chemical transport hoses having CrosslinkedPolyethylene (XLPE) or Ultra High Molecular Weight Polyethylene (UHMW) tubes. Swaged"Boss-Lock" provides you with a permanently attached Cam and Groove fitting when superiorcoupling retention is required.In testing tank transport hoses from a wide variety of manufacturers, the Swaged "Boss-Lock"fitting proved itself to be the clear winner in overall performance. Fittings are also availableon special order for other sizes or hose O.D.'s. Consult the Factory for pricing and availability.Consult the Factory for pricing and availability of the special equipmentrequired for installation.

Adapter x Hose Shankwith Ferrule

Ferrule

Notched "Boss-Lock" Type E Adapters


ABC


Size 1 1/2" 2" 3" 4"

4 11/162 3/4

1 9/16

5 3/642 13/162 1/16

6 3/84

3 3/32

7 3/164 1/4

4 3/32

Size

3/4"1"1"

Maximum Hose O.D.

1 22/64"1 35/64"1 11/16"

RE075-1370RE100-1620RE100-1770


1 6/64"1 29/64"1 9/16"

Minimum Hose O.D.


RE150NORE150NORE200NORE200NORE300NORE300NORE400NO

1 1/2"1 1/2"

2"2"3"3"4"

MaximumHose O.D.


Stainless SteelNotched Ferrule Part #Size

1 15/16"2 1/16"2 15/32"2 21/32"3 15/32"3 47/64"4 5/8"

MinimumHose O.D.

2 3/16"2 11/32"2 11/16"2 27/32"3 23/32"3 27/32"4 47/64"

The largest advantage of the Notched "Boss-Lock" design isthat the coupling can be removed from a damaged hose bycutting away the ferrule, without necessarily damaging thefitting. After inspection to determine its suitability forreuse, it can be reinstalled into another hose by using a newferrule.

The Notched "Boss-Lock" system allows you to bettermanage your inventories. You can stock one coupling andtwo ferrules, and thereby cover the same hose range withless inventory. You must purchase a fitting and thematching ferrule to create an assembly.

Dixon stems and ferrules are specifically designed to beused together as a coupling system. Due to differencesin dimensions and tolerances for safety reasons, do notuse other manufacture's stems or ferrules with DixonCam and Groove or Holedall products.

Adapter x Hose Shank


Swaged "Boss-Lock" Type C Cam and Groove Couplers

Notched NOS Shank Cam and Groove Adapters

Dixon "Andrews" Notched NOS Shank Cam and Groove Couplers

22 Notched NOS Shank Adapters and Couplers

Note: Only use the NOS shank with the NOS ferrules.

The largest advantage of the Notched "Boss-Lock" design is that the coupling can be removedfrom a damaged hose by cutting away the ferrule, without necessarily damaging the fitting.After inspection to determine its suitability for reuse, it can be reinstalled into another hoseby using a new ferrule.The Notched "Boss-Lock" system allows you to better manage your inventories. You can stockone coupling and two ferrules, and thereby cover the same hose range with less inventory. Youmust purchase a fitting and the matching ferrule to create an assembly.

Swaged Assembly Crimped Assembly

Crimped AssemblySwaged Assembly

Fits Hose O.D. From: To:

1-1/2"1-1/2"

2"2"3"3"

Size

1 15/16"2 1/16"2 15/32"2 21/32"3 15/32"3 47/64"

2 3/16"2 11/32"2 11/16"2 27/32"3 23/32"3 27/32"

150ENOSSS150ENOSSS200ENOSSS200ENOSSS300ENOSSS300ENOSSS


GAS2334NOSGAS2370NOSGAS2709NOSGAS2885NOSGAS3760NOSGAS3885NOS

304 Stainless SteelFerrule Part #

Ferrule


Ferrule

Adapter x Hose Shank


Ferrule

Note: Only use the NOS shank with the NOS ferrules.

Fits Hose O.D. From: To:

1-1/2"1-1/2"

2"2"3"3"

Size

1 15/16"2 1/16"2 15/32"2 21/32"3 15/32"3 47/64"

2 3/16"2 11/32"2 11/16"2 27/32"3 23/32"3 27/32"

150CNOSSS150CNOSSS200CNOSSS200CNOSSS300CNOSSS300CNOSSS


GAS2334NOSGAS2370NOSGAS2709NOSGAS2885NOSGAS3760NOSGAS3885NOS

304 Stainless SteelFerrule Part #

RC150BLNORC150BLNORC200BLNORC200BLNORC300BLNORC300BLNORC400BLNO

1 1/2"1 1/2"

2"2"3"3"4"

MaximumHose O.D.


Stainless SteelNotched Ferrule Part #Size

1 15/16"2 1/16"2 15/32"2 21/32"3 15/32"3 47/64"4 5/8"

MinimumHose O.D.

2 3/16"2 11/32"2 11/16"2 27/32"3 23/32"3 27/32"4 47/64"



The shank design on these fittings was developed specifically for chemical transport hoses having CrosslinkedPolyethylene (XLPE) or Ultra High Molecular Weight Polyethylene (UHMW) tubes, where shank retention canbe a problem when using conventional band clamps.In testing tank transport hoses from a wide variety of manufacturers, the "Boss-Lock-PF" fitting showed significantimprovement in hose coupling retention over the conventional Cam and Groove shank design.Other sizes are available on special order. Consult the Factory for pricing and availability. For best results werecommend the use of 3/4" wide band clamps found in the current Dixon Price List.

"Boss-Lock-PF" Adapters and Couplers 23

DIMENSIONS

ABC


Size 1 1/2" 2" 3"

5 1/642 3/4

1 9/16

5 13/322 13/162 1/16

6 3/44

3 3/32

DIMENSIONS

ABCDE


Size 1 1/2" 2" 3"

5 7/162 3/324 7/32

7 25/321 9/16

52 3/16

4 19/328 5/322 1/16

72 5/16

5 23/329 29/323 3/32


RE150PFRE200PFRE300PF

1 1/2"2"3"

Size

Type E Adapter x Special Hose Shank

Type C Coupler x Special Hose Shank


RC150EZPFRC200EZPFRC300EZPF

1 1/2"2"3"

Size


Dixon / "Andrews" Reducing Couplers x Adapters24

Adapter

Coupler

Adapter

Coupler

"Boss-Lock" and "EZ Boss-Lock" Reducing Couplers x Adapters

Dixon Valve & Coupling Company800 High StreetChestertown, MD 21620

All measurements in this brochure are for reference only and are subject to change. Where dimensions arecritical, please consult the factory. For products not shown or special application questions, pleaseconsult the factory.

RDA2030BL----------------

RDA3020BLRDA3040BLRDA4020BLRDA4030BLRDA6040BL

--------

ADA2030ADA2520ADA2530ADA3020ADA3040ADA4020ADA4030ADA6040ADA8060

BOSS-LOCKAluminum

Part #Coupler

x AdapterStainless Steel

Part #

2" x 3"2 1/2" x 2"2 1/2" x 3"

3" x 2"3" x 4"4" x 2"4" x 3"6" x 4"8" x 6"

2" x 3"

3" x 2"3" x 4"4" x 2"4" x 3"6" x 4"

RDA2030EZ

RDA3020EZRDA3040EZRDA4020EZRDA4030EZRDA6040EZ

ADA2030EZ

ADA3020EZADA3040EZADA4020EZADA4030EZADA6040EZ

EZ BOSS-LOCK

Stainless SteelPart #

AluminumPart #

Couplerx Adapter

* Two cam arm, "Andrews" design.

1015-DA-AL1510-DA-AL1520-DA-AL2010-DA-AL2015-DA-AL2025-DA-AL2030-DA-AL2040-DA-AL

----------

3015-DA-AL3020-DA-AL3025-DA-AL3040-DA-AL3060-DA-AL4020-DA-AL4025-DA-AL4030-DA-AL4050-DA-AL4060-DA-AL5030-DA-AL5040-DA-AL5060-DA-AL6030-DA-AL6040-DA-AL6050-DA-AL8060-DA-AL*

1" x 1 1/2"1 1/2" x 1"1 1/2" x 2"

2" x 1"2" x 1 1/2"2" x 2 1/2"

2" x 3"2" x 4"

2 1/2" x 2"2 1/2" x 3"3" x 1 1/2"

3" x 2"3" x 2 1/2"

3" x 4"3" x 6"4" x 2"

4" x 2 1/2"4" x 3"4" x 5"4" x 6"5" x 3"5" x 4"5" x 6"6" x 3"6" x 4"6" x 5"8" x 6"

Coupler x Adapter AluminumPart #

© 2002 DVCC CGB7011P15M

Adapter

Coupler

Adapter

Coupler

Aluminum HardCoat Part #

-------------------------------------------------------

3020-DA-ALH-------------------------

4030-DA-ALH---------------------------------------------

BrassPart #

-------------------------------------------------------

3020-DA-BR-----

3040-DA-BR---------------

4030-DA-BR------------------------------

6040-DA-BR----------

Malleable IronPart #-------------------------------------------------------

3020-DA-MI-------------------------

4030-DA-MI------------------------------

6040-DA-MI----------

1015-DA-SS1510-DA-SS1520-DA-SS2010-DA-SS2015-DA-SS2025-DA-SS2030-DA-SS2040-DA-SS2520-DA-SS2530-DA-SS3015-DA-SS3020-DA-SS3025-DA-SS3040-DA-SS3060-DA-SS4020-DA-SS4025-DA-SS4030-DA-SS

-----4060-DA-SS5030-DA-SS5040-DA-SS5060-DA-SS6030-DA-SS6040-DA-SS6050-DA-SS

-----


Cam and Groove Information - Mavic

Documents

Transcript of Cam and Groove Information - Mavic