CALL FOR PARTICIPANTS MINDTCE15 - ndt.net AND... · 3rd Session Chairperson: Mr. Zamaludin Ali...

MINDTCE15 TENTATIVE PROGRAM Day 1, 23rd November 2015

08.30 - 09.00: Registration

09.00 - 09.10: Opening CeremonyIr. Bacho PilongSenior General ManagerPetroleum Operations Management, PETRONAS

09.10 - 09.40: Plenary SpeakerMr. L. Terry ClausingPresident, American Society for Nondestructive Testing (ASNT)Certification of NDT personnel with respect to current and future NDT technology

09.40 - 10.10: Group Photography Session & Refreshment

1st Session Chairperson: Dr. Khazali Hj Mohd Zin

10.10 - 10.30: Paper IP1:Invited Speaker: Dr. Uwe ZscherpelFederal Institute for Materials Research and Testing (BAM), GermanyRecent requirements for digital radiography substituting film in different industries and standard organization

10.30 - 10.45: Paper 1: Michael Beaugrand, Jonathan SteeleBridging the digital divide: Digitizing radiographic film

10.45 - 11.00: Paper 2: Effat Yahaghi Contrast improvement of defect region in radiograph of welded objects via geometric locally adaptive sharpening

11.00 - 11.15: Paper 3: Tee Kim-TsewRadiographic sensitivity in industrial radiographic testing with x-ray films

11.15 - 11.20: Q&A Session

2nd Session Chairperson: Dr. Muhd Noor Muhd Yunus

11.20 - 11.35: Paper 4: Mike SmithRecent advances in underwater remote ACFM® inspection

11.35 - 11.50: Paper 5: Alexander MironenkoWire rope condition monitoring

11.50 - 12.05: Paper 6: Alfred NgAdvances in 3D video borescope measurement technologies for defect characterization

12.05 - 12.10: Q&A Session

3rd Session Chairperson: Mr. Zamaludin Ali

12.10 - 12.25: Paper 7: Wan Abdullah Wan HamatComprehensive site integrity assessments and mitigations for unbounded flexible pipes

12.25 - 12.40: Paper 8: Salbiah Hussein, Abd Nassir Ibrahim, Ilham Mukriz Zainal Abidin, Khazali Mohd Zin, Ab Razak HamzahCurrent progress and future development in national qualification and certification of non-destructive testing

12.40 - 12.55: Paper 9: Jose Fernando Cuenca Jimenez, Armin IskePersistent homology for defect detection in non-destructive evaluation of materials

12.55 - 13.10: Paper 10: Denis KieselCR – Systems for use in weld inspection with adherence to ISO17636-02

13.10 - 13.15: Q&A Session

13.15 - 14.15: Lunch Break

4th Session Chairperson: Dr. Ab Razak Hamzah

14.15 - 14.35: Paper IP2:Invited Speaker: Prof. Soichi HirosePresident, Japanese Society for NDI (JSNDI)The role of NDT technology for creating safer and sustainable society

14.35 - 14.50: Paper 11: John Russel Rudlin, Fredrik Hagglund, Channa Nageswaran Enhanced inspection capability for specific applications using ultrasonic phased array

14.50 - 15.05: Paper 12: Sugianto TanNew invention technology of advanced phased array ultrasonic test (PAUT) for uninsulation in-service full shell carbon steel tank scanning and wall thickness measurement

15.05 - 15.20: Paper 13: A.S. Hashim, J. Rudlin, A.R. Hamzah, S.A. Zakaria, M.S. MariDevelopment of an underwater ultrasonic weld inspection using remotely operated vehicle (ROV) with phased array technology

15.20 - 15.35: Paper 14: Aisyah Zabri, Asriana Ibrahim, Kazuyuki NakahataApplication of particle filter to identification of structural parameters in elastic solid using reflected signal

15.35 - 15.40: Q&A Session

15.40 - 15.55: Coffee Break

5th Session Chairperson: Dr. Azmi Idris

15.55 - 16.10: Paper 15: Shirsendu Sikdar, Sauvik BanerjeeIdentification of disbond in a honeycomb composite sandwich structure using ultrasonic guided wave and embedded piezoelectric sensors

16.10 - 16.25: Paper 16: Jayesh Prabhakaran, Christudas R BijudasStructural health monitoring of cylindrical shells using guided wave modes by pitch catch method

16.25 - 16.40: Paper 17: Dhanasekaran Ramasamy, Lopez Borja, Mukesh AroraIn-service application of EMAT in boiler water wall tubes and high temperature components

16.40 - 16.55: Paper 18: Santanu SahaDetection of hydrogen induced cracks during in-service inspection of piping using ultrasonic phased arrays – assessment of fitness for service

16.55 - 17.10: Paper 19: Andre LamarreImproved inspection of CRA-clad pipe welds with off-the-shelf ultrasonic phased-array technology

17.10 - 17.25: Paper 20: P.J. Mudge, A.G. Haig. K.J. ThornicraftStrategies for non-invasive monitoring of engineering structures using guided waves

17.25 - 17.30: Q&A Session

- End of Day1 -

8th Session Chairperson: Dr. Ilham Mukriz Zainal Abidin

11.45 - 12.00: Paper 29: Santanu Saha, Venkatarao BurriEddy current array technology on CRA liner pipes

12.00 - 12.15: Paper 30: Nurul A’in Ahmad Latif, Nordin Jamaludin, Ilham Mukriz Zainal Abidin, Noorhazleena AzamanDetection of corrosion in TRIGA MARK II fuel cladding using pulsed eddy current

12.15 - 12.30: Paper 31: Andre LamarreFlexible PCB eddy current array probes for the surface inspection of welds and pipes

12.30 - 12.45: Paper 32: Daiki Kishioka, Taishi Matsumoto, Kazuyuki Nakahata Electromagnetic array imaging of steel bars in concrete using high-speed SAFT

12.45 - 13.00: Paper 33: John Russell Rudlin, Shiva Majidnia Development of a pulsed eddy current method for corrosion detection in pipework

13.00 - 13.05: Q&A Session

13.05 - 14.05: Lunch Break

9th Session Chairperson: Mr. Wan Abdullah Wan Hamat

14.05 - 14.25: Paper IP4:Invited Speaker: Mr. Hamrah Mohd AliDirector General, Atomic Energy Licensing Board (AELB), MalaysiaSafety and security of radioactive material used for industrial radiography

14.25 - 14.40: Paper 34: Nares Chankow, Somyot Srisatit, Sandy Tith, Nuatawan Thamrongsiripak Use of smartphones to measure x-ray and gamma-ray dose rate for safety of industrial radiographers

14.40 - 14.55: Paper 35 : Nares Chankow, Chalermpong Polee, Somyot SrisatitX-ray and gamma-ray exposure meter based on CMOS digital camera

14.55 - 15.10: Paper 36: Amir Movafeghi, Mostafa Khodabandelou, Peyman Rostami, Jahanghir NekoueiIndustrial radiography simulation by MCNPX for pipeline corrosion detection

15.10 - 15.25: Paper 37: Hamza Haffies IsmailJapan's application on nondestructive testing of concrete structures

MINDTCE15 TENTATIVE PROGRAM Day 2, 24th November 2015

6th Session Chairperson: Mr. Awaldin Mohd Ariff

09.00 - 09.20: Paper IP3:Invited Speaker: Prof. Yong LiXi’an Jiaotong University, ChinaAdvanced electromagnetic NDE – R&D status in NDT lab of Xi’an Jiaotong University

09.20 - 09.35: ` Paper 21: Lu Zhao, Kyriakos BerketisApplication of advanced acousto-ultrasonics in automated wind turbine blade evaluation

09.35 - 09.50: Paper 22: Neil HarrapTraining for phased array ultrasonic testing – An innovative approach

09.50 - 10.05: Paper 23: Shrestha Ranjit, Manyong Choi, Wontae KimDevelopment of lock-in infrared thermography by using finite element analysis for detection of subsurface defects in metals

10.05 - 10.20: Paper 24: Ilham Mukriz Zainal Abidin, Nurliyana Shamimie Rusli, Masrol Nizam Salleh, Ab Razak Hamzah, Mohd Yusnisyam Yusof, Mohd Zaki UmarExperimental investigation of eddy current thermography NDT for defect characterisation

10.20 - 10.25: Q&A Session


7th Session Chairperson: Mr. Alamin Pardi

10.40 - 10.55: Paper 25: Muhammad Rawi Mohamed ZinNeutron beam technique to industrial and research applications

10.55 - 11.10: Paper 26: Wan Madihah Wan Abdul RahmanStar rating: Occupational radiation safety practices

11.10 - 11.25: Paper 27: Amir Movafeghi, Effat Yahaghi, Nooreddinn Mohammadzadeh, Behrooz Rokrok, Peyman Rostami, Jahanghir NekoueiUsing L0 smoothing algorithm for improvement of the corrosion estimation

11.25 - 11.40: Paper 28: Rasif Mohd Zain, Roslan Yahya, Md Fakarudin, Nazrul Hizam YusoffNeutron imaging system for level interface measurement

11.40 - 11.45: Q&A Session

15.25 - 15.30: Q&A Session


10th Session Chairperson: Dr. Rasif Mohd Zain

15.45 - 16.00: Paper 38: Mohammad Hossein SoorgeeA numerical study on proper mode and frequency selection for riveted lap joints inspection using Lamb waves

16.00 - 16.15: Paper 39: Ibrahim Asriana, Kazuyuki NakahataNumerical simulation of ultrasonic scattered wave from crack with nonlinear interface

16.15 - 16.30: Paper 40: Dheeraj P RSingle sided weld inspection using advanced ultrasonic methods

16.30 - 16.45: Paper 41: Qumrul Ahsan, Hiroshi KatoUltrasonic evaluation of aluminum/steel dissimilar metals joined by fusion welding

16.45 - 17.00: Paper 42: Kazuyuki Nakahata, Tatsunao Takamoto Guided wave testing for civil infrastructure by multipoint sensing with wireless accelerometers

17.00 - 17.15: Paper 43: Dheeraj P RBlowout preventer(BOP) inspection using advanced ultrasonic methods

17.15 - 17.20: Q&A Session

17.20: Closing

(APFNDT)

APFNDTAsia Pacific Federation for Non Destructive Testing

www.ndt.net

NDTInternational Committee for NDT

(ICNDT)

ICNDT

Malaysian Society for NDT (MSNT)

M

AL

AYSIAN SOCIETY

FO

R N

ON DESTRUCTIVE T

ESTI

NG

QUALITY THROUGH NDT Malaysian Nuclear Agency

Organized by :

ATOMIC ENERGYLICENSING BOARD

Atomic Energy Licensing Board

Supported by :

22 - 24 November 2015

“NDT for Safer Life andCleaner Environment”

MINDTCE15SUNWAY PUTRA HOTEL, KUALA LUMPUR, MALAYSIA

CALL FOR PARTICIPANTS

Registration And Programme

MALAYSIA INTERNATIONAL

NDT CONFERENCE AND EXHIBITION 2015

(MINDTCE15)

22 - 24 November 2015

“NDT for Safer Life andCleaner Environment”

MINDTCE15SUNWAY PUTRA HOTEL, KUALA LUMPUR, MALAYSIA

MALAYSIA INTERNATIONAL

NDT CONFERENCE AND EXHIBITION

2015


M

AL

AYSIAN SOCIETY

FO

R

NO

N DESTRUCTIVE TE

STI

NG

QUALITY THROUGH NDT

For further information please contact:

Dr. Abd Nassir Ibrahim (019-3514212)Dr. Khazali Hj Mohd Zin (016-3342815)Dr. Ilham Mukriz Zainal Abidin(019-2314855)

INTRODUCTIONMembers of MINDTCE15 Organizing Committee gather the best national and international NDT experts here in Kuala Lumpur to share their view, experience, their latest equipment, system and technological development as well as research findings with all of us here. We have the President of the American Society for NDT (ASNT), Mr. L. Terry Clausing as the Plenary Speaker and the President of the Japanese Society for NDI (JSNDI), Prof. Soichi Hirose as one of the invited speakers, representing two leading industrial nations that play a major role in the development of NDT technology in the world.

More than 45 papers on various subjects related to advanced NDT methods, radiation safety and security, conventional and digital radiography, phased array and other advanced ultrasonic and eddy current methods and many others will be presented to you. In addition, all exhibition booths displaying the latest products and technologies available in the current market are fully booked. This is a great opportunity to witness the most up to date and sophisticated equipment and system that help industries to run smoothly and avoiding equipment failure.

Your participations means a lot to the Society. It symbolizes our togetherness and unity in our effort to make NDT Technology as the axis for industrial development in Malaysia. Book your time and be with us at MINDTCE15.

WHO SHOULD PARTICIPATE

REGISTRATION FEESMSNT MEMBER RM1100.00NON-MSNT MEMBER RM1300.00STUDENT RM 450.00











11.15 - 11.20: Q&A Session





12.05 - 12.10: Q&A Session






13.10 - 13.15: Q&A Session

13.15 - 14.15: Lunch Break







15.35 - 15.40: Q&A Session









17.25 - 17.30: Q&A Session

- End of Day1 -







13.00 - 13.05: Q&A Session

13.05 - 14.05: Lunch Break














10.20 - 10.25: Q&A Session







11.40 - 11.45: Q&A Session

15.25 - 15.30: Q&A Session









17.15 - 17.20: Q&A Session

17.20: Closing

NDT End UsersQA & QC Personnel Involved in NDT Supervision andAny Other Individuals Whose Profession Involved Either Directly or Indirectly with NDT Technology

..

.

Plant ManagersInspection ManagersNDT ManagersNDT Supervisors

..

..

NDT PractitionersEquipment SuppliersNDT Lecturers & AcademiciansNDT Researchers

...

.



09.00 - 09.10: Opening Ceremony Ir. Bacho Pilong Senior General Manager

Petroleum Operations Management, PETRONAS

09.10 - 09.40: Plenary SpeakerMr. L. Terry ClausingPresident, American Society for Nondestructive Testing

(ASNT) Certification of NDT personnel with respect to current

and future NDT technology



10.10 - 10.30: Paper IP1:Invited Speaker: Dr. Uwe ZscherpelFederal Institute for Materials Research and Testing

(BAM), Germany Recent requirements for digital radiography substituting

film in different industries and standard organization

10.30 - 10.45: Paper 1: Michael Beaugrand, Jonathan Steele Bridging the digital divide: Digitizing radiographic film

10.45 - 11.00: Paper 2: Effat Yahaghi Contrast improvement of defect region in radiograph of

welded objects via geometric locally adaptive sharpening

11.00 - 11.15: Paper 3: Tee Kim-Tsew Radiographic sensitivity in industrial radiographic testing with x-ray films

11.15 - 11.20: Q&A Session


11.20 - 11.35: Paper 4: Mike Smith Recent advances in underwater remote ACFM® inspection

11.35 - 11.50: Paper 5: Alexander Mironenko Wire rope condition monitoring

11.50 - 12.05: Paper 6: Alfred Ng Advances in 3D video borescope measurement technologies for defect characterization

12.05 - 12.10: Q&A Session






13.10 - 13.15: Q&A Session

13.15 - 14.15: Lunch Break







15.35 - 15.40: Q&A Session









17.25 - 17.30: Q&A Session

- End of Day1 -







13.00 - 13.05: Q&A Session

13.05 - 14.05: Lunch Break














10.20 - 10.25: Q&A Session







11.40 - 11.45: Q&A Session

15.25 - 15.30: Q&A Session









17.15 - 17.20: Q&A Session

17.20: Closing











11.15 - 11.20: Q&A Session





12.05 - 12.10: Q&A Session


12.10 - 12.25: Paper 7: Wan Abdullah Wan Hamat Comprehensive site integrity assessments and

mitigations for unbounded flexible pipes

12.25 - 12.40: Paper 8: Salbiah Hussein, Abd Nassir Ibrahim, Ilham Mukriz Zainal Abidin, Khazali Mohd Zin, Ab Razak

Hamzah Current progress and future development in national

qualification and certification of non-destructive testing

12.40 - 12.55: Paper 9: Jose Fernando Cuenca Jimenez, Armin Iske Persistent homology for defect detection in

non-destructive evaluation of materials

12.55 - 13.10: Paper 10: Denis Kiesel CR – Systems for use in weld inspection with adherence to ISO17636-02

13.10 - 13.15: Q&A Session

13.15 - 14.15: Lunch Break


14.15 - 14.35: Paper IP2:Invited Speaker: Prof. Soichi HirosePresident, Japanese Society for NDI (JSNDI)

The role of NDT technology for creating safer and sustainable society

14.35 - 14.50: Paper 11: John Russel Rudlin, Fredrik Hagglund, Channa Nageswaran Enhanced inspection capability for specific applications

using ultrasonic phased array

14.50 - 15.05: Paper 12: Sugianto Tan New invention technology of advanced phased array

ultrasonic test (PAUT) for uninsulation in-service full shell carbon steel tank scanning and wall thickness

measurement

15.05 - 15.20: Paper 13: A.S. Hashim, J. Rudlin, A.R. Hamzah, S.A. Zakaria, M.S. Mari Development of an underwater ultrasonic weld

inspection using remotely operated vehicle (ROV) with phased array technology

15.20 - 15.35: Paper 14: Aisyah Zabri, Asriana Ibrahim, Kazuyuki Nakahata Application of particle filter to identification of structural

parameters in elastic solid using reflected signal

15.35 - 15.40: Q&A Session









17.25 - 17.30: Q&A Session

- End of Day1 -







13.00 - 13.05: Q&A Session

13.05 - 14.05: Lunch Break














10.20 - 10.25: Q&A Session







11.40 - 11.45: Q&A Session

15.25 - 15.30: Q&A Session









17.15 - 17.20: Q&A Session

17.20: Closing











11.15 - 11.20: Q&A Session





12.05 - 12.10: Q&A Session






13.10 - 13.15: Q&A Session

13.15 - 14.15: Lunch Break







15.35 - 15.40: Q&A Session



15.55 - 16.10: Paper 15: Shirsendu Sikdar, Sauvik Banerjee Identification of disbond in a honeycomb composite

sandwich structure using ultrasonic guided wave and embedded piezoelectric sensors

16.10 - 16.25: Paper 16: Jayesh Prabhakaran, Christudas R Bijudas Structural health monitoring of cylindrical shells using

guided wave modes by pitch catch method

16.25 - 16.40: Paper 17: Dhanasekaran Ramasamy, Lopez Borja, Mukesh Arora In-service application of EMAT in boiler water wall tubes

and high temperature components

16.40 - 16.55: Paper 18: Santanu Saha Detection of hydrogen induced cracks during in-service

inspection of piping using ultrasonic phased arrays – assessment of fitness for service

16.55 - 17.10: Paper 19: Andre Lamarre Improved inspection of CRA-clad pipe welds with

off-the-shelf ultrasonic phased-array technology

17.10 - 17.25: Paper 20: P.J. Mudge, A.G. Haig. K.J. Thornicraft Strategies for non-invasive monitoring of engineering

structures using guided waves

17.25 - 17.30: Q&A Session

- End of Day1 -







13.00 - 13.05: Q&A Session

13.05 - 14.05: Lunch Break














10.20 - 10.25: Q&A Session







11.40 - 11.45: Q&A Session

15.25 - 15.30: Q&A Session









17.15 - 17.20: Q&A Session

17.20: Closing











11.15 - 11.20: Q&A Session





12.05 - 12.10: Q&A Session






13.10 - 13.15: Q&A Session

13.15 - 14.15: Lunch Break







15.35 - 15.40: Q&A Session









17.25 - 17.30: Q&A Session

- End of Day1 -







13.00 - 13.05: Q&A Session

13.05 - 14.05: Lunch Break









09.00 - 09.20: Paper IP3:Invited Speaker: Prof. Yong LiXi’an Jiaotong University, China

Advanced electromagnetic NDE – R&D status in NDT lab of Xi’an Jiaotong University

09.20 - 09.35: ` Paper 21: Lu Zhao, Kyriakos Berketis Application of advanced acousto-ultrasonics in

automated wind turbine blade evaluation

09.35 - 09.50: Paper 22: Neil Harrap Training for phased array ultrasonic testing – An innovative approach

09.50 - 10.05: Paper 23: Shrestha Ranjit, Manyong Choi, Wontae Kim Development of lock-in infrared thermography by using

finite element analysis for detection of subsurface defects in metals

10.05 - 10.20: Paper 24: Ilham Mukriz Zainal Abidin, Nurliyana Shamimie Rusli, Masrol Nizam Salleh, Ab Razak Hamzah, Mohd Yusnisyam Yusof, Mohd Zaki Umar

Experimental investigation of eddy current thermography NDT for defect characterisation

10.20 - 10.25: Q&A Session



10.40 - 10.55: Paper 25: Muhammad Rawi Mohamed Zin Neutron beam technique to industrial and research applications

10.55 - 11.10: Paper 26: Wan Madihah Wan Abdul Rahman Star rating: Occupational radiation safety practices

11.10 - 11.25: Paper 27: Amir Movafeghi, Effat Yahaghi, Nooreddinn Mohammadzadeh, Behrooz Rokrok, Peyman Rostami,

Jahanghir Nekouei Using L0 smoothing algorithm for improvement of the corrosion estimation

11.25 - 11.40: Paper 28: Rasif Mohd Zain, Roslan Yahya, Md Fakarudin, Nazrul Hizam Yusoff Neutron imaging system for level interface measurement

11.40 - 11.45: Q&A Session

15.25 - 15.30: Q&A Session









17.15 - 17.20: Q&A Session

17.20: Closing











11.15 - 11.20: Q&A Session





12.05 - 12.10: Q&A Session






13.10 - 13.15: Q&A Session

13.15 - 14.15: Lunch Break







15.35 - 15.40: Q&A Session









17.25 - 17.30: Q&A Session

- End of Day1 -


11.45 - 12.00: Paper 29: Santanu Saha, Venkatarao Burri Eddy current array technology on CRA liner pipes

12.00 - 12.15: Paper 30: Nurul A’in Ahmad Latif, Nordin Jamaludin, Ilham Mukriz Zainal Abidin, Noorhazleena Azaman

Detection of corrosion in TRIGA MARK II fuel cladding using pulsed eddy current

12.15 - 12.30: Paper 31: Andre Lamarre Flexible PCB eddy current array probes for the surface

inspection of welds and pipes


12.45 - 13.00: Paper 33: John Russell Rudlin, Shiva Majidnia Development of a pulsed eddy current method for

corrosion detection in pipework

13.00 - 13.05: Q&A Session

13.05 - 14.05: Lunch Break


14.05 - 14.25: Paper IP4:Invited Speaker: Mr. Hamrah Mohd AliDirector General, Atomic Energy Licensing Board (AELB),

Malaysia Safety and security of radioactive material used for industrial radiography

14.25 - 14.40: Paper 34: Nares Chankow, Somyot Srisatit, Sandy Tith, Nuatawan Thamrongsiripak Use of smartphones to measure x-ray and gamma-ray

dose rate for safety of industrial radiographers

14.40 - 14.55: Paper 35 : Nares Chankow, Chalermpong Polee, Somyot Srisatit

X-ray and gamma-ray exposure meter based on CMOSdigital camera

14.55 - 15.10: Paper 36: Amir Movafeghi, Mostafa Khodabandelou, Peyman Rostami, Jahanghir Nekouei

Industrial radiography simulation by MCNPX for pipeline corrosion detection

15.10 - 15.25: Paper 37: Hamza Haffies Ismail Japan's application on nondestructive testing of concrete structures








10.20 - 10.25: Q&A Session







11.40 - 11.45: Q&A Session

15.25 - 15.30: Q&A Session









17.15 - 17.20: Q&A Session

17.20: Closing











11.15 - 11.20: Q&A Session





12.05 - 12.10: Q&A Session






13.10 - 13.15: Q&A Session

13.15 - 14.15: Lunch Break







15.35 - 15.40: Q&A Session









17.25 - 17.30: Q&A Session

- End of Day1 -







13.00 - 13.05: Q&A Session

13.05 - 14.05: Lunch Break














10.20 - 10.25: Q&A Session







11.40 - 11.45: Q&A Session

15.25 - 15.30: Q&A Session



15.45 - 16.00: Paper 38: Mohammad Hossein SoorgeeA numerical study on proper mode and frequency

selection for riveted lap joints inspection using Lamb waves

16.00 - 16.15: Paper 39: Ibrahim Asriana, Kazuyuki Nakahata Numerical simulation of ultrasonic scattered wave from

crack with nonlinear interface

16.15 - 16.30: Paper 40: Dheeraj P R Single sided weld inspection using advanced ultrasonic methods

16.30 - 16.45: Paper 41: Qumrul Ahsan, Hiroshi Kato Ultrasonic evaluation of aluminum/steel dissimilar metals

joined by fusion welding

16.45 - 17.00: Paper 42: Kazuyuki Nakahata, Tatsunao Takamoto Guided wave testing for civil infrastructure by multipoint

sensing with wireless accelerometers

17.00 - 17.15: Paper 43: Dheeraj P R Blowout preventer(BOP) inspection using advanced ultrasonic methods

17.15 - 17.20: Q&A Session

17.20: Closing











11.15 - 11.20: Q&A Session





12.05 - 12.10: Q&A Session






13.10 - 13.15: Q&A Session

13.15 - 14.15: Lunch Break







15.35 - 15.40: Q&A Session









17.25 - 17.30: Q&A Session

- End of Day1 -







13.00 - 13.05: Q&A Session

13.05 - 14.05: Lunch Break














10.20 - 10.25: Q&A Session







11.40 - 11.45: Q&A Session

15.25 - 15.30: Q&A Session









17.15 - 17.20: Q&A Session

17.20: Closing

MINDTCE15 SPONSOR OPPORTUNITY

DIAMOND SPONSOR : RM 18,000

GOLD SPONSOR : RM 10,000

2 x Exhibition space (Include 2 full conference registrations + 2 meal vouchers)2 x Conference registration2 x Pre-conference workshop registration2 pages of colour advertisements in the final programme book including the outside back coverAcknowledgement in all conference publications4 x Company bunting displayed in the conference area (Sponsor shall provide the buntings)1 x Company bunting displayed in the registration area (Sponsor shall provide the bunting)3 inserts in the conference bags ( Sponsor shall provide the inserts)Company logo with hyperlink published at MSNT website until 30/6/2016First priority in choice of other sponsorship opportunitiesAssistance with hotel reservation

1 x Exhibition space (Include 1 full conference registration + 1 meal voucher)1 x Conference registration1 x Pre-conference workshop registration2 pages of colour advertisements in the final programme bookAcknowledgement in all conference publications2 x Company bunting displayed in the conference area (Sponsor shall provide the buntings)1 x Company bunting displayed in the registration area (Sponsor shall provide the bunting)2 inserts in the conference bags ( Sponsor shall provide the inserts)Company logo with hyperlink published at MSNT website until 30/6/2016Second priority in choice of other sponsorship opportunitiesAssistance with hotel reservation

----

--

-

----

------

-

----











11.15 - 11.20: Q&A Session





12.05 - 12.10: Q&A Session






13.10 - 13.15: Q&A Session

13.15 - 14.15: Lunch Break







15.35 - 15.40: Q&A Session









17.25 - 17.30: Q&A Session

- End of Day1 -







13.00 - 13.05: Q&A Session

13.05 - 14.05: Lunch Break














10.20 - 10.25: Q&A Session







11.40 - 11.45: Q&A Session

15.25 - 15.30: Q&A Session









17.15 - 17.20: Q&A Session

17.20: Closing

OTHER SPONSORSHIP OPPORTUNITY

In addition to your level of sponsorship, you may support the following activities

CONFERENCE BAGS SPONSOR : RM 12,000Company logo printed on each conference bagLogo with hyperlink at MSNT website until 30/6/2016Acknowledgement in all conference publications

CONFERENCE USB FLASH DRIVE BRACELET SPONSOR : RM 8,000Company logo printed on each USB flash drive braceletLogo with hyperlink at MSNT website until 30/6/2016Acknowledgement in all conference publications

STAFF JACKET SPONSOR : RM 5,000Company name and logo on all staff jacketsAcknowledgement in all conference publications

BADGE LANYARDS SPONSOR : RM 3,000A badge lanyard with the company logo provided to each participantAcknowledgement in all conference publications

NAME BADGE SPONSOR : RM 2,000A name badge with the company logo provided to each participantAcknowledgement in all conference publications

PENS SPONSOR : RM 3,000Company logo printed on pens distributed to each participantAcknowledgement in all conference publications

DINNER SPONSOR : RM 2,000 per table of 10 paxCompany logo displayed at the dinner areaLogo with hyperlink at MSNT website until 30/6/2016 (for sponsor who sponsor at least 3 tables)Acknowledgement in the program timetable

COFFEE BREAK SPONSOR (ONE DAY) : RM 4,000Company logo displayed at the coffee break areaLogo with hyperlink at MSNT website until 30/6/2016Acknowledgement in the program timetableAcknowledgement in all conference publications

COMMERCIAL POSTERS SPONSOR : RM 1,000Promotion of the company on commercial posters within the poster sectionAcknowledgement in all conference publications

COMPANY LOGO AT MSNT WEBSITE : RM 1,000Company with hyperlink published at MSNT website until 30/6/2016

COMPANY BUNTING IN THE CONFERENCE ROOM : RM 250 / buntingCompany bunting displayed in the conference room (Sponsor shall bring their own buntings)

INSERT IN THE CONFERENCE BAG : RM 200 / flyerInsert of one flyer into the conference bags (Sponsor shall bring their own flyers)

PRE-CONFERENCE WORKSHOP SPONSORSHIP : RM 3,000Display company bunting, demo equipment and brochures in the workshop

ADVERTISEMENT – FINAL PROGRAMME BOOKInside back colour cover advertisement : RM 2,000 (Subject to availability)One page colour advertisement : RM 1,500Half page colour advertisement : RM 1,000











11.15 - 11.20: Q&A Session





12.05 - 12.10: Q&A Session






13.10 - 13.15: Q&A Session

13.15 - 14.15: Lunch Break







15.35 - 15.40: Q&A Session









17.25 - 17.30: Q&A Session

- End of Day1 -







13.00 - 13.05: Q&A Session

13.05 - 14.05: Lunch Break














10.20 - 10.25: Q&A Session







11.40 - 11.45: Q&A Session

15.25 - 15.30: Q&A Session









17.15 - 17.20: Q&A Session

17.20: Closing


In addition to your level of sponsorship, you may support the following activities

CONFERENCE BAGS SPONSOR : RM 12,000Company logo printed on each conference bagLogo with hyperlink at MSNT website until 30/6/2016Acknowledgement in all conference publications

CONFERENCE USB FLASH DRIVE BRACELET SPONSOR : RM 8,000Company logo printed on each USB flash drive braceletLogo with hyperlink at MSNT website until 30/6/2016Acknowledgement in all conference publications

STAFF JACKET SPONSOR : RM 5,000Company name and logo on all staff jacketsAcknowledgement in all conference publications

BADGE LANYARDS SPONSOR : RM 3,000A badge lanyard with the company logo provided to each participantAcknowledgement in all conference publications

NAME BADGE SPONSOR : RM 2,000A name badge with the company logo provided to each participantAcknowledgement in all conference publications

PENS SPONSOR : RM 3,000Company logo printed on pens distributed to each participantAcknowledgement in all conference publications

DINNER SPONSOR : RM 2,000 per table of 10 paxCompany logo displayed at the dinner areaLogo with hyperlink at MSNT website until 30/6/2016 (for sponsor who sponsor at least 3 tables)Acknowledgement in the program timetable

COFFEE BREAK SPONSOR (ONE DAY) : RM 4,000Company logo displayed at the coffee break areaLogo with hyperlink at MSNT website until 30/6/2016Acknowledgement in the program timetableAcknowledgement in all conference publications

COMMERCIAL POSTERS SPONSOR : RM 1,000Promotion of the company on commercial posters within the poster sectionAcknowledgement in all conference publications

COMPANY LOGO AT MSNT WEBSITE : RM 1,000Company with hyperlink published at MSNT website until 30/6/2016

Terms and conditions of sponsorship will be included in the sponsorship agreement.

In case you are interested in participating as sponsorship partner or you would like to obtain more information related to sponsorship please contact Mr. Royce Wong at his mobile phone no.+6012 381 1122 or his email [email protected]

We look forward to welcome you in Kuala Lumpur!

MINDTCE15 Promotion & Sponsorship Committee

COMPANY BUNTING IN THE CONFERENCE ROOM : RM 250 / buntingCompany bunting displayed in the conference room (Sponsor shall bring their own buntings)

INSERT IN THE CONFERENCE BAG : RM 200 / flyerInsert of one flyer into the conference bags (Sponsor shall bring their own flyers)

PRE-CONFERENCE WORKSHOP SPONSORSHIP : RM 3,000Display company bunting, demo equipment and brochures in the workshop

ADVERTISEMENT – FINAL PROGRAMME BOOKInside back colour cover advertisement : RM 2,000 (Subject to availability)One page colour advertisement : RM 1,500Half page colour advertisement : RM 1,000












11.15 - 11.20: Q&A Session





12.05 - 12.10: Q&A Session






13.10 - 13.15: Q&A Session

13.15 - 14.15: Lunch Break







15.35 - 15.40: Q&A Session









17.25 - 17.30: Q&A Session

- End of Day1 -







13.00 - 13.05: Q&A Session

13.05 - 14.05: Lunch Break














10.20 - 10.25: Q&A Session







11.40 - 11.45: Q&A Session

15.25 - 15.30: Q&A Session









17.15 - 17.20: Q&A Session

17.20: Closing

Exhibition Booth Layout Plan

MINDTCE1522 to 24 November 2015 Sunway Putra Hotel, Kuala Lumpur

A total of 26 booths are available with all of them have been booked mainly by equipment manufacturers and suppliers who wish to showcase their latest equipment. Members of NDT communities will have a great opportunity to see and test the latest technologies, systems, instrumentation and equipment. Visitors will also have the opportunity to meet some of the oversea and local manufacturers and suppliers to discuss about business co-operation and ways to improve their cost of operation, productivity, quality and safety.

EXHIBITION

LIST OF EXHIBITORS

Booth

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

Company name

NDT Equipment Sdn. Bhd.

Gammatec

FOMA Bohemia Spol. S R.O.

Iftitah Solutions (M) Sdn Bhd

Altech Industrial & Engineering Supply S/B

EXTENDE

Mega Colonial Sdn. Bhd.

Advantech Alliance

GE

C.Melchers Gmbh & Co. (Malaysia)

JPK Malaysia

Asia NDE Sdn Bhd

C. Melchers Gmbh & Co. (Malaysia)

Aseptec Sdn Bhd

Malaysian Nuclear Agency

Hamza Ujibina Services

NDTS India (P) Limited

EPSB

Xspec Technology Sdn Bhd

SLH Metaltech Sdn Bhd

Zhengzhou Runde Dellonscope Co., Ltd.

RCA Regional Office

www.Eye2eye.Com.Sg

Country

Malaysia

Malaysia

Czech Republic

Malaysia

Malaysia

France

Malaysia

Malaysia

Malaysia

Malaysia

Malaysia

Malaysia

Malaysia

Malaysia

Malaysia

India

Malaysia

Malaysia

Malaysia

China

Korea

Singapore

Pre-conference Workshop - 22nd November 2015

‘STATUS, TECHNOLOGIES AND APPLICATIONS’

About the Course Digital Industrial Radiography (DIR) has emerged as the future of radiography application in Non Destructive Testing (NDT). This technique differs from conventional radiography by the use of digital detectors to restore digitized images. Various types of digital detectors have becoming available with the advancement of the DIR system. For instance, Computed Radiography, Flat Panel or Fluoroscopy is the most widely used in industries. These digital detectors system allow the user to do image processing for image enhancement and defect recognition. The technology offer high energy radiation applications ranges from 10 kV to several MeV.

In DIR system, the main advantage is its ability to significantly reduce the radiation dose in comparison to film applications. In view of this perspective, DIR has attracted the interest of NDT communities and researches around the world especially in the R&D sector as well as for the industrial applications. NDT communities also realize the potential of this system due to other benefits which it can offer i.e automatic defect detection, reusability, environmental friendly, digitally formatted and post processing freedom.

At present, several codes and standards such as EN, ASTM and ISO have been developed for DIR applications. Deep understanding of these codes and standards is necessary to meet the requirements needed for detector selection and image quality of various digital detectors.

Due to this reason, Malaysian Society for Non Destructive Testing (MSNT) through Malaysia International NDT Conference and Exhibition 2015 (MINDTCE15) offer a Pre-Conference Workshop on ‘Status, Technologies and Applications’ to provide an insight into the world of DIR and understanding the codes and standard as their guidelines during inspections or R&D activities.

Who Should Attend:Researchers, NDT professionals, service provider, scientists, design and manufacturing engineer, welding and corrosion inspector, academicians, QA and QC personnel, NDT managers and personnel in related fields.

What To expect:This workshop will compromise a blend of overviews of DIR technologies, couple with introduction in existing standard practices on DIR applications.

Topics covered:• Current status on DIR technologies and standards• Software and tools for DIR• DIR with computed radiography (CR)• DIR with digital detector arrays (DDA)• Exposure requirements for DIR• Inspection of welded components by DIR• DIR for computed tomography (CT)


M

AL

AYSIAN SOCIETY

FO

R N

ON

DESTRUCTIVE TE

STI

NG

QUALITY THROUGH NDT

Asia Paci�c Federation for NDT (APFNDT)

APFNDTAsia Pacific Federation for Non Destructive Testing

www.ndt.net

NDTInternational Committee for NDT

(ICNDT)

ICNDTMalaysian Nuclear Agency

ATOMIC ENERGYLICENSING BOARD

Atomic Energy Licensing Board

Supported by :

Speaker:

Uwe Zscherpel is a staff scientist at BAM Berlin since 1992 and since 1996 project leader of the group “Digital Radiology” in the Division “Non-Destructive Testind - Radiological Methods” of the Federal Institute for Material Research and Testing (BAM) in Germany. His main working field is digital image processing in industrial radiology. This includes NDT film digitization, digital image analysis and pattern recognition as well as the digital reproduction of reference film catalogues for welding and casting. With the introduction of new radiographic image detectors like imaging plates and flat panel detectors for industrial applications, standardization and relibility of these new techniques are additional working fields. He is also active in education and training of personnel within the German NDT society of NDT (DGZfP) as lecturer and examiner for industrial radiology and as IAEA expert for expert missions and training courses in digital industrial radiology around the world.

Participation Fees:

Student : RM 200

MSNT member : RM 300

Non MSNT member : RM 400

Date: 22 November 2015 (Sunday)Time: 8.30am to 4.30pmVenue: Enggang and Merak Function Room, Sunway Putra Hotel, Kuala Lumpur

Registration is based on first come first serve basis due to limited space.Fee include tea/coffee breaks and lunch.

For registration and inquiry, please contact Dr. Ilham Mukriz Zainal Abidin at his mobile phone no. +6019 2314855

Organized by:Malaysian Society for Non destructive Testing (MSNT)

Any queries please contact:Dr. Ilham Mukriz Zainal Abidin [email protected]. Khairul Anuar Mohd Salleh [email protected] Dr. Ab Razak Hamzah [email protected]. Habibah Adnan [email protected] Dr. Rasif Mohd Zain [email protected]

METHOD OF PAYMENT

REGISTRATION FORM

Company:

Address:

City:

State:

First Name:

Position:

Email:

Mobile:

Post Code:

Country:

Surname:

Title:

Tel:

Fax:

Mr. / Ms. /

Registration Fees (Ringgit Malaysia, MYR)

Student Non-member Member AmountPlease select the event you would like to attend

Pre-conference workshop, 22 november 2015

Malaysia International NDT Conference &Exhibition 2015, 23 - 24 November 2015

Total:

Grand Total:

All fees are in Ringgit Malaysia (MYR).

200.00 300.00 400.00

450.00 1,100.00 1,300.00

Payment can be made by Cheque or Fund Transfer prior to the event or Banker Cheque / Cash at registration counter during the event. Please ensure all details in this registration form are spelled in correctly and mode of payment is clicked. Invoices will be issued to companies when registration form is received. Registration fees should be made payable to “Malaysian Society for Nondestructive Testing”. Payment may be remitted to the following bank details.

Account Name: Malaysian Society for Non-Destructive Testing Account No: 86 0046247 6Bank Name: CIMB Islamic Bank Berhad SWIFT Code: CTBBMYKLBank Address: Lot 1.04 & 1.05, Level 1 Wisma UNIKEB, Universiti Kebangsaan Malaysia, Bangi, Selangor, Malaysia.

Please email a copy of the payment remittance advice slip together with this registration form to Ms. Nor Hafzan Sarah Almuin, e-mail: [email protected] and Dr. Ilham Mukriz Zainal Abidin, e-mail: [email protected].

CANCELLATION & REFUNDSFor cancellations received before 15th November 2015, 50% of the fee will be charged. For cancellations received after 15th November 2015, 100% of the fee will be charged. Replacement delegates may be sent in lieu of those cancelled with a handling fee of MYR30.00.

MSNT reserve the right to cancel or postpone any event due to insufficient registrations or other reasons beyond their control, as well as alter the program if they deem necessary. MSNT reserve the right to refuse registrations.

Cheque Funds Transfer Cheque / Cash payment at registration counter during the event

MSNT Member Non-MSNT Member

LOCATION MAP

MINDTCE1522 to 24 November 2015 Sunway Putra Hotel, Kuala Lumpur

Sunway Putra Hotel Kuala Lumpur(Formerly known as The Legend Hotel & Apartments, Kuala Lumpur)9th Floor Sunway Putra Place100 Jalan Putra50350 Kuala LumpurMalaysia

GPS Coordinates : 3.1665, 101.693

Tel: +603 4042 9888Fax: +603 4043 0700Toll Free: +6 1 800 88 3390

CALL FOR PARTICIPANTS MINDTCE15 - ndt.net AND... · 3rd Session Chairperson: Mr. Zamaludin Ali...

Documents

Transcript of CALL FOR PARTICIPANTS MINDTCE15 - ndt.net AND... · 3rd Session Chairperson: Mr. Zamaludin Ali...