Calibre - knoll.com
Transcript of Calibre - knoll.com
Price ListMay 2021
Calibre
Table of Contents
Introduction Knoll and Sustainable Design 2
Lateral File Planning Overview 3
Lateral File Sample Bid Technical Specifications 8
Built-to-Spec Lateral File Considerations 11
Ordering Calibre Files and Storage 12
Ordering the Calibre Pedestal 13
Calibre Files and Storage 14
Calibre Pedestal 17
Calibre File Collection Calibre Front Lateral Files - Preconfigured 19
Calibre Front Hybrids 38
Calibre Front Cabinets 41
Lateral File Worksurface Tops 48
Calibre Add-on Modules 54
Calibre Bookcases 55
Planning Built-to-Spec Calibre Lateral Files 60
Built-to-Spec Worksheet 61
Calibre Front Lateral Files- Built-to-Spec 62
Calibre Front Lateral Files with Individual Locking Drawers 69
Laminate Front Lateral Files 74
Series 2 Front Lateral Files 75
Calibre File Accessories 76
Calibre Front Pedestals Calibre Pedestals 78
Calibre Front Pedestals withIndividual Locking Drawers
Calibre Pedestals 96
Calibre Pedestal Accessories 101
Calibre Front Storage Towers 159 Wide Storage Towers 104
249 Wide Storage Towers 110
309 Wide Storage Towers 119
Calibre Tower Accessories 121
Wall Mounting of Knoll Products 128
Alpha-Numeric Index 130
Selling Policy 134
KnollKey Lock Program 137
General Ordering Information 138
Calibre
PLCAL06211
Copyright Q 2021 Knoll, Inc.All rights reserved.All prices effective 05/15/2021.
Knoll and Sustainable Design
Each year Knoll sets key initiatives in the journey to sustainability. Focused on our impact to people and planet, Knoll reports material
health product attributes and sets operational targets to reduce greenhouse gas emissions, waste generation and water use (in our North
American facilities.)
Material transparency is a core Knoll sustainable design value, enabling us to optimize the design and performance of our products.
Our material health program utilizes independent third-party certifications that provide an impartial and trustworthy foundation for
industry-wide transparency. Certification by respected third parties ensures that all manufacturers are held to the same high standards.
Knoll certifications include: Forest Stewardship Council (FSCt), Intertek’s Clean Air Program, Business and Institutional Furniture
Manufacturer’s Association (BIFMA) LEVELt certification, International Living Future Institute’s (ILFI) Declare labelling and Certified
Environmental Product Declarations. In addition, Knoll is aligned with the U.S. Green Building Council and can help organizations
achieve credits for Leadership in Energy and Environmental Design (LEEDt), WELL and the Living Building Challenge (LBC) building
certifications.
In our manufacturing operations, we focus on efficiency and impact. Knoll Office and Knoll Europe manufacturing locations are ISO
14001:2015 certified. Knoll sets objectives and targets to reduce energy, water and waste. These initiatives are part of a long-term
strategy to further reduce energy consumption and lower our carbon footprint.
We also believe in helping our customers find viable options when decommissioning furniture or other related assets. ANEW’s Full
Circle Program, in partnership with Knoll, allows customers to leverage buy-back and re-sale programs as well as explore options for
repurposing or recycling that mitigate landfill impact through energy-from-waste conversion.
For more information about Knoll and sustainable design, visit www.knoll.com/environment.
2
Lateral File Planning OverviewCalibre Planning and Technical Specifications
Calibre files are available inpre-configured and built-to-specmodels that incorporate a flexible1.59 planning module to optimize thebest use of space within a case. Mostapplications can be satisfied withpre-configured files, which areavailable in the most commonconfigurations. For specialapplications Calibre can be orderedbuilt-to-spec, which allowsthousands of drawer and doorconfigurations.
Lateral Files, Pre-configuredCalibre pre-configured files areavailable in 10 heights and 3 widths.All feature the use of a 1.59 verticalplanning module. The 1.59 planningmodule makes better use of space bymore efficiently storing andmaintaining files, binders, officesupplies and other articles ascompared to a traditional 39 planningmodule. There are 9 drawer/doormodules heights available to supportfront-to-back or side-to-side filing ofletter, legal, A4, JIS, standardbinders and EDP paper sizes.
Lateral Files, Built-to SpecCalibre, built-to-spec files allow awide variety of drawer and shelfoptions. Through the combination ofthe 10 case heights and the 9 drawermodules, thousands of custom caseconfigurations are possible to meetany special application.
Hybrids Pre-configuredHybrid storage units combine hingeddoors to store binders and supplieswith 129 file drawers to supportfiling. Hybrids are available inheights of 55.59, 639 and 64.59 inwidths of 309 and 369.
Cabinets Pre-configuredA variety of pre-configured storagecabinets with adjustable shelves areavailable with or without doors in 6heights and 2 widths. Think of usinga Calibre cabinet without doors whenyou want to have the appearance of abookcase when aligning a cabinetnext to lateral files. Cabinets havethe same base detail (1 1/29 tall) oflateral files, as well as the sameoverall depth of 189. A Calibrebookcase on the other hand is only
159 deep and has a 2 1/169 high base.
Doors are available in standardCalibre style. Locks are optional formodels with doors.
Add-on ModulesCalibre lateral files maybeaugmented with add-on modules thathelp make maximum use of verticalspace. Add-on modules are availablein 4 nominal heights and 3 widthsand can be mounted to any standardCalibre lateral file. Add-on unitscome with two hinged doors. 279 and309 modules include one adjustableshelf. Modules are available with orwithout locks.
Note: The actual overall exteriorheight of Calibre Add-on modules is14 7/89, 16 3/89, 28 3/89 and 31 3/89
Add-on modules are for use withCalibre files only. Calibre files, andAdd-on modules are 189 deep. S2front lateral files are 18 7/89 deep andhave overlay fronts instead of insetfronts as is the case with Calibrefiles. Therefore, S2 front lateral fileswill accept an Add-on module.
Add-on modules will attach toCalibre files manufactured prior to2003. There is a limit of one Add-onmodule per case.
How would you or why would youuse an Add-on module?
1. Add-on modules allow for thecreation of 6 high or taller caseconfigurations. Match a 55.59high case (with 5-10.59 drawers)with a 13.59 nominal heightAdd-on module and you have alow profile 6 high case thatprovides high-density filing forhanging file folders with an easilyaccessed space for binder storage.
2. Add-on modules can provideadditional storage capacity forbinders and supplies by makingbetter use of vertical space. Both279 and 309 Add-on modules willaccommodate two rows ofstandard size binders.
3. Add-on modules provide moredesign flexibility by extending therange of case heights.
Module Application and size
Drawer Modules Application Ext H. Int H.
159 Rollout drawer with hanging rails EDP, oversized binders, A4 and standard binders 14 7/89 14 5/89
13.59 Rollout drawer with hanging rails Binders, top tab files or tape seals 13 3/89 13 1/89
129 Rollout drawer with hanging rails Top tab hanging and non-hanging files or end tab files 11 7/89 11 5/89
10.59 Rollout drawer with hanging rails Top tab hanging and non-hanging file folders 10 3/89 10 1/89
99 Rollout drawer Oversized specialty items and supplies 8 7/89 8 5/89
7.59 Rollout drawer 5 1/49 diskettes, audio tapes and CD/ROM jewel cases 7 3/89 7 1/89
69 Rollout drawer Index cards, microfilm, 3 1/29 diskettes and video tapes 5 7/89 5 5/89
39 Rollout drawer Pens, pencils, business cards and other smaller office supplies 2 7/89 2 5/89
1.59 Reference/posting shelf Touch down platform for sorting or stacking files or documents 1 3/89 N/A
Drawer Modules* Application Ext H. Int H.
159 Receding door fixed shelf EDP, oversized binders, A4 or standard binders 14 7/89 13 1/49
13.59 Receding door fixed shelf Standard binders or suspended top tab files or tape seals 13 3/89 11 3/49
129 Receding door fixed shelf Top tab hanging and non-hanging files or end tab files 11 7/89 109
159 Receding door pullout shelf EDP, oversized binders, A4 or standard binders 14 7/89 13 1/49
13.59 Receding door pullout shelf Standard binders or suspended top tab files or tape seals 13 3/89 11 3/49
129 Receding door pullout shelf Top tab hanging and non-hanging files or end tab files 11 7/89 109
*Interior height is reduced by 159 at hinge location
Calibre
3
Lateral File Planning OverviewCalibre Planning and Technical Specifications
To prevent lateral file/tower fromtipping over and causing injury:
• Read and follow installationinstructions shipped with eachlateral file/tower before use.Consult your Knoll dealer forfurther details.
• Lateral files/towers must beleveled using adjustable glides inthe base.
• Lateral files should be ganged(connected) to adjacent lateralfiles or anchored to a floor or wall.If not ganged or anchored thelateral file must becounter-weighted using counterweight kits recommended in theinstallation instructions.
• Each lateral file and some towersare equipped with a safetyinterlock system which preventsopening more than one drawer at atime. Do not attempted to overridethe interlock system by openingtwo drawers simultaneously, sincethe lateral file/tower may tip.(Does not apply to all towers.)
• Load tower drawers first and placethe heaviest items in the lowestdrawer. Reverse the process whenunloading. Distribute weightevenly within each drawer.
Failure to follow these instructionscould result in personal injury orproperty damage.
It is recommended that all 279h,34.59h and 399h files be gangedtogether, to a wall/floor or utilized acounter weight kit to prevent toppingwhen fully loaded.
Calibre
4
Lateral File Planning OverviewCalibre Lateral Filing Volume and Weights
Filing PlanningCalibre pre-configured files include 1.59, 39, 69, 7.59, 10.59, 129, 13.59 and159 drawer and door modules. The 129, 13.59 and 159 drawers are designed tohandle all standard paper sizes including:
Letter (8 1/29 X 119)Legal (8 1/29 X 149)A4 Foolscap (9 1/59 X 14 1/39)JIS (9 1/59 X 12 1/49)EDP (8 1/29 X 159)
The 10.5( drawer module is designed to handle:Letter (8 1/29 X 119)Legal (8 1/29 X 149)
Note: Only 129, 13.59 and 159 modules are available as receding doors witheither fixed or pull-out shelves.
Filing Volume and WeightsThe paper size or media to be stored will determine the best width of file tospecify. In applications requiring high-density letter-sized documents filedfront-to–back, the most efficient file widths are 309 and 429. Files that are369 wide work efficiently to store legal-sized documents in front to backconfigurations and do not efficiently handle letter-sized documents.
Finding the Optimum Storage Configuration:309 width (Front-to-Back) = Letter 31.5 Filing Inches309 width (Side-to-Side) = Legal 26 3/4 Filing Inches369 width (Front-to-Back) = Letter 31.5 Filing Inches369 widths (Side-to-Side) = Legal 32 3/4 Filing Inches429 widths (Front-to-Back) = Letter 47 Filing Inches429 widths (Side-to-Side) = Legal 38 3/4 Filing Inches
Example: If 12’ of open wall space were available for 519 high files with4-129 drawers, two options would be possible:
Option A: Four 369 wide filesOption B: Two 429 and two 309 wide files
If the usage was for letter-sized documents filed front-to-back, option Awould provide 504 total filing inches, while option B would allow 628 totalfiling inches in the same square footage.
Calibre Lateral File Approximate Case Weights (Empty Units)
27( High File with 2-12( drawers:309w (98 lbs.)369w (110 lbs.)429w (123 lbs.)
39( High File with 3-12( drawers:309w (133 lbs.)369w (150 lbs.)429w (167 lbs.)
51( High File with 4-12( drawers:309w (169 lbs.)369w (190 lbs.)429w (211 lbs.)
63( High File with 5-12( drawers:309w (208 lbs.)369w (233 lbs.)429w (258 lbs.)
All drawers support up to .017 pounds per cubic inch of volume assuming theinterior height is no more than 129 high.
Calibre
5
Lateral File Planning OverviewKnoll Panel Height Matrix Alignment to Knoll Calibre Lateral Files
ReffPanel
34 42 49 64
File Height 26.843 38.843 44.843 50.843 53.843 55.343 58.343 62.843 64.343
DividendsPanel
42 50 57 64
File Height 26.843 38.843 44.843 50.843 53.843 55.343 58.343 62.843 64.343
3
CurrentsPanel
39 48 64
File Height 26.843 38.843 44.843 50.843 53.843 55.343 58.343 62.843 64.343
Note: Knoll Systems are listed with the Calibre file heights that best match their overall panel heights. Both the files and panels are listed with glides fullyretracted. Calibre files provide 3/49 vertical glide adjustment. Plan for the optimization of filing and storage rather than the visual alignment of the drawersbetween storage solutions. Calibre files are built on a 1.59planning module with a 129 high drawer head that is actually 11.9009 tall. Pedestals have 129 highdrawer heads that are 11.7339 tall. Therefore, pedestals drawers will not align with file drawers when combined within a workstation. If a lateral file look next toa pedestal is desired, then specify a doublewide pedestal in place of the lateral file, below the worksurface. Doublewide pedestals share the same 11.7339 talldrawer height of the pedestal.
Calibre
6
Lateral File Planning OverviewUnderstanding Pattern Numbers for Calibre Lateral Files
The first eight characters of the alpha/numeric pattern numbers for Calibre orS2 files, refers to the type of front, the height and width of the case andwhether it is non-lock or locking.
Example First 8 Characters: C2F5536CDDDDDC = Calibre front2 = Generation codeF = File55 = Nominal height of the case36 = WidthC = Locking
The remaining characters address the height of the component from the top tothe bottom of the file.
Example Last Characters: C2F5536CDDDDDD = 10.59 DrawerD = 10.59 DrawerD = 10.59 DrawerD = 10.59 DrawerD = 10.59 Drawer
A character is required at the end of pattern number to designate the finishcode. In some instances there may be a need for additional characters orcharacter substitutions to add options to the product. An example of this isthe specification of reference/posting shelves. Pre-configured files comestandard with a tie bar/lateral spanner that is denoted with a product patterncode of ‘‘K’’ within the parent pattern number. If a reference/posting shelf isrequired, you must replace the ‘‘K’’ code with a ‘‘J’’ code within the parentproduct pattern number and add a list price up-charge.
Calibre
7
Lateral File Sample Bid Technical SpecificationsCalibre Lateral Files, Hybrids and Cabinets
General Product Description
A. Files shall be of contemporarystyling, with a steel top, sidepanels, back panel, full bottom,rollout drawers and shelvesmounted on ball bearingsuspensions, receding doors,fixed shelves, interlockingdrawers and individual lockingdrawers. Available with orwithout locks. Individual lockingdrawers are also available with orwithout security separators.
B. Lateral File sizes that must beavailable:Depth: 189 (Must accommodateletter or legal width files)Widths: 309, 369 and 429Nominal Drawer Head Heights:39, 69, 7.59, 99, 10.59, 129, 13.59and 159Nominal reference shelf: 1.59Overall height of cases withglides fully retracted: 279, 34.59,399, 459, 519, 549, 55.59, 58.59,639 and 64.59
C. Hybrids sizes that must beavailable:Depth: 189Width: 309 and 369Drawer hand heights: 39, 69, 7.59,99, 10.59, 129, 13.59 and 159Overall height of cases withglides fully retracted 55.59, 639and 64.59
D. Cabinets sizes that must beavailableDepth 189Widths: 309 and 369Overall height of cases withglides fully retracted279, 34.59 399, 519, 55.59, 639and 64.59
E. Add-on ModulesDepth 189Widths: 309, 369, 429Overall height of cases: 14 7/89,16 3/89, 28 3/89, 31 3/89
CaseA. The wrapper, comprising the side
panels and back panel, shall be22-gauge steel with formed 20gauge steel vertical channels tosupport the mounting of drawerslides and shelves. Verticalchannels shall be welded to thebase assembly. In addition thevertical channels shall be gluedand welded to the wrapper.
B. Back panel shall be constructedfrom 22-gauge steel with aformed vertical channel of 20gauge steel. The vertical channel
shall be welded to the base panand back, along with the use ofan adhesive. In addition toincreasing the overall structuralintegrity of the case, the verticalchannel reinforcement shall alsosupport the installation of dividerseptum’s.
C. Top pan shall be of 20-gaugesteel with a formed channelspanning the width of the case.Top shall support the case lockhousing. Top shall bemechanically attached to allowfor removal and replacement inthe field. The top pan shall besupported by side-to-sidecross-rails that are welded to theside vertical channels.
D. Steel Bottom pan shall be20-gauge steel with formedchannels spanning the depth andwidth of the case. Side-to-sideand front to back channels areinstalled and welded to the panfor increased rigidity. The baseshall be welded to the verticalchannels and bottom flanges ofthe wrapper assembly. Base shallsupport four-recessed, extendableglides.
DrawersA. 109 and taller drawers shall be
able to accommodate letter andlegal Pendaflex file folders.
B. All 69, 7.59, 10.59 and 129 drawerbodies shall be of 2-piececonstruction consisting ofminimum 20-gauge drawerbottom and 22-gauge verticalwrapper. All other drawer bodiesshall be constructed of 20-gaugesteel with welded construction.
C Load capacity for 39-159 drawersshall be at least 0.017 pounds percubic inch of usable space.
D. Drawers shall be supported withfull extension, ball-bearing slideswith a minimum of 150 poundcapacity (159 x 429 drawers)
E. Metal drawer fronts shall beconstructed of 20-gauge steelavailable in two styles. StandardCalibre style fronts shall be insetand flush with case. Series 2 stylefronts are available for selectconfigurations featuring anoverlay front design. All metaldrawer fronts shall have fullwidth integral drawer pull.
F. Optional laminate drawer frontsare available for select sizes andconfigurations in a range of
finishes. Laminate drawer frontsfeature an overlay design with 109applied finger pull.
Receding DoorsA. 13.59 and 159 receding doors
shall be available with eitherfixed or pullout shelves. Fixedshelves shall support standard8 1/29 X 119 binders. 159 fixedshelves shall support EDP filing.
B. Receding doors shall use a hingealong with a ball-bearing glidesuspension. Hinges shall provideclearance for standard sizebinders when used with a 13.59 or159 receding door fixed shelfconfiguration.
C. Door front shall have a full widthintegral drawer pull.
Suspensions (Drawer Slides)Suspension must be tested and listedto be acceptable.Suspension shall support heavy dutyand high-usage application.
A. Drawers and pullout shelves shalloperate on full extension metalball-bearing suspensions. Eachslide shall have 44, 1/49 ballbearings.
B. Ball-bearing suspensions shall beused for reference/ postingshelves, receding doors and filedrawers.
C. All drawers and shelves must beremovable without removing ordismantling the suspension orinterlock mechanism.
D. Suspension shall provide aninterlock system for drawers andpullout shelves (excludingreference shelves).
LocksA. Available in locking or
non-locking units.
B. Locks shall have a removablelock core.
C. Locks may be keyed alike.
D. Locks will be master keyed.
E. Individual locking drawers shallbe supported.
Paint FinishFinish coat to be baked enamel orelectrostatic applied epoxy powdercoat with a range of colors with glosslevel not to exceed .50. Colorselection shall include custom matchpaints.
Labels
Each file is to have a 9Caution Label9attached to the top compartment andvisible to the user when thecompartments are accessed. Labelshall contain safety precautionsincluding leveling, loading andweight distribution.
AccessoriesEach file drawer with the exceptionof the 39, 69, 7.59 and 99 drawersshall come with file bars that supportlegal and letter filing. Optional labelholders shall be available. Allreceding doors with fixed shelf shallbe shipped with D-ring dividers andattachment back.
TrimPulls shall be full width and integralto the drawer head.
LevelersLevelers shall be zinc-planted steeltreaded rods with nylon pads for 3/49overall adjustment (base of file is1 1/29 tall).
Calibre
8
Lateral File Sample Bid Technical SpecificationsCalibre Lateral File with Series 2 Steel Fronts
General Product Description
A. Files shall be of contemporary styling, with asteel top, side panels, back panel, full bottom,rollout drawers and shelves mounted on ballbearing suspensions, interlocking drawers.Available with or without locks.
B. Lateral File sizes that must be available:Depth: 189 (must accommodate letter or legalwidth files)Widths: 309, 369 and 429Drawer Head Heights: 129
C. Overall height of cases with glides fullyretracted: 279, 399 and 519
CaseInner frame: 20-gauge steelWrapper: 22-gauge steelCase top: 20-gauge steelCase base: 20-gauge steel
LevelersLevelers shall be zinc-plated steel threaded rodswith nylon pads for 3/49 overall adjustment (Base offile is 1 1/29 tall)
DrawerDrawer body: Steel construction, 20-gauge bottomwith 22-gauge vertical wrapperDrawer front: 20-gauge steel with integral, fullwidth pull
Shelf3/49 adjustable shelf: 20-gauge steelCabinet height adjustment: increments of 2.59
Lock AssemblyA. Lock and interlocking system components are
integral to the steel, triple extension ballbearing drawer slides
B. Master keys available
C. Field-removable lock cores
D. Lock cores housings are cast metal with ablack anodized finish
Drawer SuspensionsDrawer suspensions shall be triple extension,telescoping suspension fitted with steel ballbearings and retainers. Slides contain an integral,cable actuated interlocking systems
Paint FinishPaint finish shall be electrostatic appliedpowder-coat epoxyApplication thickness: 1.5-2.0 mmGloss range: non-metallic: 30-40Gloss range: metallic: 40-50Paint grades: P1, P2 and P3
DimensionsDepth: 18 7/89 for lateral files.Available widths: 309, 369 and 429 for lateral filesAvailable heights: 279, 399, 519 lateral files
Actual Case Heights:27( 26 27/32939( 38 27/32951( 50 27/329
Calibre
9
Lateral File Sample Bid Technical SpecificationsCalibre Lateral Files, Hybrids and Cabinets
Component Description
Case Inner frame: 20-gauge steelWrapper: 22-gauge steelCase top: 20-gauge steelCase base: 20-gauge steel
Drawer Drawer body: Minimum 20-gauge bottom;22-gauge sides
Drawer front: 20-gauge steel with integral fullwidth pull
Shelf Fixed shelf 1/29: 18-gauge steel (Only used with13.59 receding door)Shelf adjustable 3/49: 20-gauge steelCabinet Height adjustment: increments of 2.59
Levelers Zinc-plated steel threaded rods with nylon padsfor 3/49 overall adjustment. (Base of file is 1 1/29 tall)
Lock Assembly Lock and interlocking system components areintegral to the steel, triple extension ball bearingdrawer slides
Master keys available
Field-removable lock cores
Lock core housings are cast metal with a blackanodized finish
Drawer and Roll-outSuspensions
Triple extension, telescoping suspension fittedwith steel ball bearings and retainers. Slidescontain an integral, cable actuated interlockingsystem
Receding DoorSuspensions
Ball bearing suspension slides
Reference/Posting Shelf
Ball bearing suspension slides
Paint Finish Electrostatic applied powder-coat epoxyApplication thickness: 1.5-2.0 mmGloss range: non-metallic: 30-40Gloss range: metallic: 40-50Paint grades: P1, P2 and P3Custom color match for non-metallic, non-custompaints provided at a P2 list price. All white andmetallic paints will be processed as a P3 paintgrade.
Component Description
Critical Dimensions External Depth: 189 for Calibre laterals, cabinets,hybrids and add-on units
External Depth: 159 for bookcases (Note the baseheight of Bookcases is 2 1/169 compared to 1 1/29high for Calibre files)
Available widths: 309, 369 and 429 for lateral filesand add-on units
Available widths: 309 and 369 for cabinets,hybrids and bookcases
Available heights: 279, 34.59,399, 459, 519, 549,55.59, 58.59, 639 and 64.59 for lateral files(Nominal)
Available heights: 55.59, 639 and 64.59 forhybrids (Nominal).
Available heights: 279, 34.59, 399, 519, 55.59, 639and 64.59 cabinets (Nominal). Bookcases 27.259,29.8759, 399, 43.59, 57.1259, 63.3759, 70.759, and84.59 respectively.
Available heights: 13.59, 159, 279 and 309 foradd-on’s units (Heights listed in price list arenominal, the actual heights of add-on modules are14 7/89, 16 3/89, 28 3/89 and 31 3/89 respectively).
Actual Calibre Case Heights: (Standard 1.59 highbase)27( 26 27/32934.5( 34 11/32939( 38 27/32945( 44 27/32951( 50 27/32954( 53 27/32955.5( 55 11/32958.5( 58 11/32
63( 62 27/32964.5( 64 11/329
Calibre
10
Built-to-Spec Lateral File ConsiderationsCalibre Lateral Files
Create Custom Solutions
To create a built-to-spec file, youmust first select from one of 10standard case heights in 3 widths.Case heights are available in 279,34.59, 399, 459, 519, 549, 55.59,58.59, 639 and 64.59 (nominal). Casewidths are available in 309, 369 and429. After you have selected theappropriate case for your application,then you may begin to configure theinterior modules that best supportthe filing and storage requirementsas defined by the user. There are 9standard drawer heights in variousconfigurations to support any numberof filing and storage needs. They are1.59, 39, 69, 7.59, 10.59, 129, 13.59and 159 high.
Drawer modules are designed tomatch up with the interiordimensions of the cases. The totalnumber of modules used within acase must not exceed the totalinterior capacity. Listed here are theactual interior heights of thestandard Calibre file cases:
Outside Case Interior Case279 24934.59 31.59399 369459 429519 489549 51955.59 52.5958.59 55.59639 60964.59 61.59
When compiling a product patternnumber and pricing for abuilt-to-spec case, specify theindividual components within thechosen case from the top down. Thetotal height of drawer modules withina case will be 39 less than the totaloverall height of the case. This is aresult of a 1 1/29 deduction for the topand an additional 1 1/29 deduction forthe base for a total 39. When creatingyour pattern number start with thecase pattern number first: C2F5530C(55.59 high x 309 wide case with alock), then add your drawers from thetop down. Each drawer will have aletter designating its size, forexample a 10.59 high drawer isrepresented by the character 9D9.Within a 55.59 high case you mayplace up to five 9D9 modules to fillthe interior space of 52.59, which isthe space available with the 39deduction for the base and top of thecase. The math is simple; just followthe planning rules listed in thedocument to avoid any mistakes.Also, consult the notes at the bottomof each page for additionalspecification information.
Please note the following planningconsiderations when designing a‘‘Built-to-Spec’’ configuration:
1. Posting shelves nor tie-bars arepermitted directly belowcupboard doors.
2. Tie-bars and posting shelves arenot permitted within the toplocation or the bottom location ofa lateral file.
3. Calibre files are painted with amonochromatic color scheme. Ifcase and drawer fronts arerequired to be a different color onthe same case, this is considereda special and requires a customproduct request form from CustomProduct Development.
4. Receding doors with fixed andpullout shelves are not permitteddirectly below posting shelves oron any lateral file with hybrid unitdoors.
5. Cases are limited to either onetie-bar or one posting shelf percase.
6. Individual locking drawers arenot available as a 9Built-to-Spec9option.
7. Only 639 and 64.599Built-to-Spec9 Hybrids arepermitted.
8. S2 front Calibre lateral files arenot available as a 9Built-to-Spec9.
9. No more than four 69 or 39drawers may be placed within acase as standard product. Morethan four 69 or 39 drawers may bespecified only as special product.Pricing for these special files maybe more than a ‘‘built-to-spec’’standard file with the sameconfiguration.
Additional Calibre File PlanningConsiderations:
1. S2 lateral files will not acceptstandard Calibre worksurface filetops, as the files are 18 7/89 deep.You must use topics specific to S2front lateral files.
2. Calibre Add-on modules are notdesigned for use with S2 frontlateral files.
3. When using 459 through 64.59high files, counterweights arerecommended for files not gangedtogether or anchored to walls.
4. Posting shelves are best utilizedin case configurations that usereceding doors to support end tabfiling.
5. Lateral files may not be placed orstacked on top of one another.
6. Lateral files must be loaded fromthe bottom up with the heaviestitems in the lower drawers.
7. Calibre lateral files utilize a 129high drawer head that is actually11.9009 tall. Pedestals have 129high drawer heads that are11.7339 tall. Therefore, pedestalsdrawers will not align with filedrawers when combined within aworkstation. If a lateral file looknext to a pedestal is desired, thenspecify a doublewide pedestal inplace of the lateral file, below theworksurface. Doublewidepedestals share the same 11.7339tall drawer height of the pedestalas well as the same base profile.
Calibre
11
Ordering Calibre Files and Storage
The Product
This section of the CalibreCollection Price List will give youall the information you will need tospecify Calibre Files and Storageproducts.
To meet different aestheticrequirements, Calibre Files andStorage can be specified with thestandard Calibre front, or with anoptional front designed to matchSeries 2 products.
The Numbers
The options available in specifyingCalibre products are clear, and theordering process simplified, throughthe numbering system.
This alphanumeric system ismodular, like the files themselves.Each digit stands for a singleproduct variable.
The first three digits specify thecase front, generation and producttype. The last digits specify theheight, width, lock option andmodule configuration – beginning atthe top of the cabinet anddescending to the bottom.
Preconfigured
Preconfigured units are availableand are intended to simplify yourordering process. Preconfiguredunits are the most commonconfigurations that are ordered andinclude files and cabinets.
Built-to-Spec
Calibre can be specified inthousands of configurations usingour ‘‘built-to-spec’’ option to meetany storage need.
We have included a worksheet thatis designed to help you build anordering number and determine theprice of your file. You will need thisinformation, and a finish code fromthe Calibre colors card to place anorder.
All units need to be specified fromthe top down.
Built-to-Spec units that include 39,69, 99 or 159 components or includeR,S,T, or U door options are subjectto extended lead times.
The Worksheet
Page 61 is a worksheet designed tohelp you build an ordering numberand determine the price of your file.You will need this information, anda finish code to place an order.
Color
All inside and outside case surfacesare painted in the same specifiedpaint color.
Interior components and accessoriesare painted in black. Mechanicalparts are zinc plated or painted in acolor integral to manufacturing.
Please refer to the Calibre Colorscard for Standard Front and Casefinishes. Color codes are notincluded in the product ordernumber, and must be specifiedseparately to complete your Calibreorder. In addition to the colorcard, always evaluate an actualpaint sample prior tospecification.
Locks
Most Calibre product may beordered with or without locks.Product ordered without locksinclude a black Knoll-logo insert inthe same position. Insert may beremoved to retrofit a lock later.
Statement of line
Calibre fronts are available on caseheights of 279, 399, 459, 519, 549,55.59, 58.59, 639 and 64.59 withinset fronts in heights of 1.59, 39,69, 7.59, 99, 10.59, 129, 13.59 and159.
Series 2 fronts are available on 279,399 and 519 cases with 129 overlayfronts.
Calibre
12
Ordering the Calibre Pedestal
The Product
The Calibre pedestal is a storagesolution that incorporates the awardwinning softly radiused pull of theCalibre file with the state-of-the-arttechnology of a seamless wrapper.The Calibre pedestal is at home inany office environment.
The Calibre pedestal consists of astrong single piece shell that housesseveral different configurations.Floorstanding and mobile pedestalsare available in any of the Calibrefinish colors.
The Numbers
The specifying process for theCalibre pedestal is clear andsimplified through the numbersystem.
The alphanumeric pattern number is7 digits long with each digit standingfor a product variable.
The first digit stands for pedestal caseheight:3 = Standard case height
The second digit stands for the style ofpedestal:B = FloorstandingC = Mobile
The third and fourth digits stand fordepth:18 = 189 deep24 = 249 deep30 = 309 deep
The fifth digit stands for the lockchoice:C= Knoll lockE = No lock
The sixth and seventh digits stand forthe drawer configuration:01 = box/file
(6/12)02 = personal/personal/file
(3/3/12)03 = box/box/box
(6/6/6)04 = personal/EDP
(3/15)05 = box/box/file
(6/6/12)06 = personal/personal/box/file
(3/3/6/12)07 = file/file
(12/12)08 = personal/box/EDP
(3/6/15)09 = personal/box/file
(3/6/15)
Example: 3B18CO5
Calibre, floorstanding, 189 deep,Knoll lock, box/box/file (6/6/12).
Locks
Follow KnollKey Lock Programlisted on page 137.
Base Fascia
The base fascia should be specifiedwhen Calibre Pedestals are usednear Calibre Files. See page 101 formore information.
Calibre
13
Calibre Files and StorageColors and Finishes
Knoll Color Program
Core Paint FinishesSpecify Core finishes for all newcustomers
P1 Paint Finishes111 Jet Black112 Brown113 Dark Grey114 Folkstone Grey115 Medium Grey116 SandStone117 Soft Grey118 Bright White
P1 Textured Paint Finishes111T Textured Jet Black112T Textured Brown113T Textured Dark Grey114T Textured Folkstone Grey115T Textured Medium Grey116T Textured SandStone117T Textured Soft Grey118T Textured Bright White
P2 Paint Finishes611 Beige Mist Metallic612 Medium Metallic Grey
P2 Textured Paint Finishes611T Textured Beige Mist
Metallic612T Textured Medium Metallic
Grey
P3 Paint Finishes613 Silver
Pull Finishes for Laminate FrontFiles111 Jet Black112 Brown113 Dark Grey114 Folkstone Grey115 Medium Grey116 Sandstone117 Soft Grey118 Bright White611 Beige Mist Metallic612 Medium Metallic Grey613 SilverAA Anodized AluminumAN Anodized Nickel
Paint Samples49 x 69 (CALSAMP) or 89 x 89(CALSAMPLG) metal samples maybe ordered in any core paint finish toaid in color selection. Samples areavailable as a single plate or as apack of 10 (same color only).
Pattern # ListCALSAMP 26.CALSAMP10 198.
Note: For laminate front storage,specifiers must select a paint finishfor the case as well as choosing alaminate selection for the front.
Custom File Colors PolicyFor all colors outside the standardpalettes for Calibre storage asdefined within this price list, Knollwill custom match your specification.Please submit the request usingKnoll’s Custom Finish Planneravailable on Dealer Portal.
Custom colors will be processed at aP2 list price for finishes that are notmetallic, clear or white. Metallic,clear and white finishes will beprocessed at a P3 list price.
Extended lead times may apply tocustom paint match selections.
Laminate finishes for Laminate Front Files and File Worksurface TopsLaminate Front Files: matching edge band unless noted otherwiseFile Worksurface Tops: select edge band finish*denotes melamine finish+ finishes available for Dividends Horizon style file tops only
L1 - Solid Colors114* Folkstone Grey117* Soft Grey118* Bright White119* Pumice
L2 - Solid Colors111* Jet Black115* Medium Grey128* Fog
L2 - Patterned121 Micro Grey
114 edge band122 Brushed Sand
119 edge band123 Brushed Grey
128 edge band129 Micro Sand
119 edge band
L2 -Wood Grain124* Medium Cherry125* Natural Maple126* Natural Cherry127* Walnut139* Light Ash140* Warm Ash141* Whitened Ash142* Grey Ash143* Classic Oak144* Graphite Pear145 Zebra147 * Silverwood +148 * Smokewood +149 * Barnwood +
File Top and Worksurface EdgeBands111 Jet Black113 Dark Grey114 Folkstone Grey115 Medium Grey117 Soft Grey118 Bright White119 Pumice124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut128 Fog139 Light Ash140 Warm Ash141 Whitened Ash142 Grey Ash143 Classic Oak144 Graphite Pear145 Zebra
Calibre
14
Calibre Files and StorageWood Finishes
Wood FinishesNew codes begin with a three digit numeric sequence, followed by a letter suffix. Each letter suffix (A-F) represents a different combination of pore fill optionsand gloss levels.
Code V1 TECHWOOD
638 Blond Maple628 Dark Mahogany639 Light Cherry641 Black Oak506 Maple509 Cherry512 Medium Walnut513 Medium Teak514 Espresso637 Natural644 Light Walnut645 Dove Grey
Gloss Level Fill LevelA Low Gloss Closed PoreB MediumGloss Closed PoreC High Gloss Closed Pore
D Low Gloss Open PoreE Medium Gloss Open PoreF High Gloss Open Pore
*Note:For more detailed information on Veneer finishes, please refer to the Wood Finish Matrix on the Knoll.com
Calibre
15
Calibre Files and StorageLegacy Finishes
Knoll Legacy Finish SelectionsFile Top and WorksurfaceLaminate and Edge ColorsSpecify Legacy Finishes to matchexisting product only. Legacyfinishes are not available for newcustomers
Dividends Laminate OptionsMP70 Light OakM95 Grey GraniteM96 Rose GraniteMP58 Deep MahoganyM80 TaupeM89 SlateM5 Dark NeutralMR6 Winter Gray MatrixPA PearwoodSD SandCM Clear MapleMC Carmel MapleWM Warm CherryB SnowES7 White Essence
Legacy FinishesCalibre and S2 Front File andCabinet Colors
P1 Paint FinishesA381 Bone11 Classic WhiteD Dark NeutralY1 PewterR TaupeWLWB Willow Grey
P2 Paint FinishesV Dark Metallic Grey2 Flint MetallicU Light Metallic GreyW Light Metallic TanH Metallic Beige
P3 Paint FinishesB White
Calibre
16
Calibre PedestalColors and Finishes
Knoll Color Program
Core Paint FinishesSpecify Core finishes for all newcustomers
P1 Paint Finishes111 Jet Black
(was 27 Matte Black)112 Brown113 Dark Grey (was Y3)114 Folkstone Grey115 Medium Grey (was Y2)116 SandStone117 Soft Grey (was E)118 Bright White
P1 Textured Paint Finishes111T Textured Jet Black112T Textured Brown113T Textured Dark Grey114T Textured Folkstone Grey115T Textured Medium Grey116T Textured SandStone117T Textured Soft Grey118T Textured Bright White
P2 Paint Finishes611 Beige Mist Metallic612 Medium Metallic Grey
(was J)
P2 Textured Paint Finishes611T Textured Beige Mist
Metallic612T Textured Medium Metallic
Grey
P3 Paint Finishes613 Silver (was 3)
Legacy Paint FinishesSpecify Legacy Finishes to matchexisting product only. Legacyfinishes are not available for newcustomers
P1 Paint FinishesA381 Bone11 Classic WhiteD Dark NeutralY1 PewterR TaupeWLWB Willow Grey
P2 Paint FinishesV Dark Metallic Grey2 Flint MetallicU Light Metallic GreyW Light Metallic TanH Metallic Beige
P3 Paint FinishesB White
ColorAll inside and outside pedestal casesurfaces are painted in the samespecified paint color.
Interior components and accessoriesare painted in Black. Mechanicalparts are zinc plated or painted in acolor integral to manufacturing.
Please refer to the Calibre finish cardfor case and front finishes. Colorcodes are not included in the productorder number and must be specifiedseparately to complete your Calibrepedestal order.
Custom Colors Policy
PaintCustom paint colors may be appliedto Calibre Pedestals on a selectbasis.
For colors outside the standardpalette for Calibre, Knoll will custommatch to your specificationaccording to the followingrequirements.
The request for a custom paint colormust be accompanied by a purchaseorder for the product to be orderedand by a master color-match sampleof paint applied to metal, havingdimensions of at least 39 x 59.
Knoll will evaluate the sample todetermine application feasibility.Upon approval for application, Knollwill forward a two factory sampleswith an assigned Knoll color nameand code for customer approval. Oneof the approved samples must besigned and returned to Knoll beforean order may be placed.
Upon receiving customer approval,Knoll will enter the order.
Calibre pedestals incur a P2 listprice for custom non-metallicfinishes or a P3 list price for custommetallic, clear and white finishes.
Calibre
17
Calibre PedestalKnollTextiles and Spinneybeck Leathers
Approved textiles for CalibreMobile Pedestal Cushion
Abacus f
AegeanAlignmentAll StarAlter EgoArberArno f
ArrondissementAswanAtelierAtlasAxiom jfr
BackdropBaxterBeaconBelizeBiota f
BiscayneBistro f
Bocce f
Boundary f
Brigadoon fjfr
CairoCameoCatoCatwalkCenturyChain LinkChanceCharmChiseledChroma f
Chronicle f
CircaClassic Boucle f
CleoClose KnitColor FieldCommon Ground f
Commuter Cloth f
Compass CRComaroCoterieCrossroadCuddle StripeDahlia CRDay TripperDeliteDemureDivaDjenneDouble Agent jfr
DuneDurandDynamicEarthwork f
Eclat Weave
ElementEntouragef
EssenceFerryFibraFireflyForza jfr
Fox Trot CRGalla II f
GibsonGliderGrandeGrandviewGreenwichGroovyHarrisonHazeHeavy MetalHeliosHighlandHolbrookHologramHourglassHudsonIconIn StitchesInnuendoIslandJasmineJourneyf
JubileeJunoKabukiKampalaKatazomeKaya CRKeatonKimonoKingstonKnoll Felt f
Knoll Hopsack f
Kora CRLagosLegend CRLibertyLimaniLittle DevilLore CRLudlowLyricMagnoliaMarinerMarqueeMasqueradeMelangeMelody jfr
MenagerieMeroeMidpointMilestone
Mod PlaidModern TweedMonarch f
Nature WalkNight LifeNobleNorth IslandObiOh La LaOriginsOverture f
PalisadePanache CRParadigmPedal Pusher jfr
Petite FloralPlaidtasticPogoPrairie jfr
Prepf
Presto f
Prim f
Prince HairyPullmanQuarkRadianceRansom f
ReflectRegard CRRivingtonRoamRush HourSaharaSandpiper CRSashikoSequin CRSerendipitySeuratShermanSidelineSinclairSmart jfr
Soireef
SoliloquySonnet f
SoonSpark f
SpencerSpree f
StacksStepping StonesStretch AppealStriae StripeStripemaniaSummitSuttonf
SwankSwingSynth f
Tabloid f
Theory jfr
Tight Rope jfr
Tilden jfr
Tinge jfr
TopographyTotemTower GridTreble CRTrophyTrystUltrasuede f
Uni-FormUtmostUtrilloVateraVenueVersa f
VersatilityVibe II jfr
Vinyl jfr
WestwoodWhipWild ThingWitWoodlandWorld PieceYeniZari CRZen WaveZiplineZoom
Pedestal cushions are upholstered(from the front to the back of thepedestal) with the fabric directionmatching the textile sample.
Aproved Spinneybeck Leathers forCalibre Mobile Pedestal Cushions
AlaskaAmazonAndesArizonaCervoCopenhagenCordovanDerbyDistressedDucaleDucale VeloursEspanaMaremmaMarissaPrimaRivaSabrinaSaddleSalonVelluto PelleVolo
C = approved for use on credenza cushion P = approved for use on mobile pedestal cushion f = CAL 133 Pre-approvedjfr Fire Retardants Chemicals
Calibre
18
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files279 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
279 high lateral file, 2-129 drawers with hangingrails
309 279 C2F2730ECC $998. $1,101. $1,158.
309 279 Y C2F2730CCC 1,061. 1,169. 1,229.
369 279 C2F2736ECC 1,126. 1,239. 1,303.
369 279 Y C2F2736CCC 1,192. 1,311. 1,381.
429 279 C2F2742ECC 1,225. 1,352. 1,414.
429 279 Y C2F2742CCC 1,287. 1,423. 1,490.
279 high lateral file, 2-129 drawers recedingdoors with pullout shelves
309 279 C2F2730EZZ 1,148. 1,266. 1,330.
309 279 Y C2F2730CZZ 1,213. 1,337. 1,401.
369 279 C2F2736EZZ 1,275. 1,404. 1,483.
369 279 Y C2F2736CZZ 1,343. 1,481. 1,558.
429 279 C2F2742EZZ 1,374. 1,519. 1,590.
429 279 Y C2F2742CZZ 1,435. 1,587. 1,664.
Order Code
27( High Calibre Front LateralFiles
Example: C2F2730CCC-115
C Calibre Front
2 Generation Code
F File
27 279 High
30 309 Wide
C Knoll Lock
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see custom colorpolicy page 14)
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three high) should beweighted with a counterweight (seeAccessories, page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 26 27/329Actual Inside Case Height 249
Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
19
Cal
ibre
File
Col
lect
ion
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files279 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
279 high lateral file, 1-39, 2-10.59 drawers withhanging rails
309 279 C2F2730EIDD $1,343. $1,485. $1,565.
309 279 Y C2F2730CIDD 1,405. 1,550. 1,626.
369 279 C2F2736EIDD 1,466. 1,620. 1,702.
369 279 Y C2F2736CIDD 1,527. 1,681. 1,765.
429 279 C2F2742EIDD 1,572. 1,737. 1,826.
429 279 Y C2F2742CIDD 1,635. 1,801. 1,890.
279 high lateral file, 1-13.59 receding door withfixed shelf, 1-10.59 drawer with hanging rails
309 279 C2F2730EMD 1,147. 1,266. 1,337.
309 279 Y C2F2730CMD 1,213. 1,330. 1,399.
369 279 C2F2736EMD 1,210. 1,338. 1,404.
369 279 Y C2F2736CMD 1,271. 1,400. 1,471.
429 279 C2F2742EMD 1,274. 1,407. 1,485.
429 279 Y C2F2742CMD 1,340. 1,473. 1,550.
Order Code
27( High Calibre Front LateralFiles
Example: C2F2730CCC-115
C Calibre Front
2 Generation Code
F File
27 279 High
30 309 Wide
C Knoll Lock
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see custom colorpolicy page 14)
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three high) should beweighted with a counterweight (seeAccessories, page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 26 27/329Actual Inside Case Height 249
Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
20
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files34.59 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
34.59 high lateral file, 3-10.59 drawers withhanging rails
309 34.59 C2F3430EDDD $1,367. $1,503. $1,577.
309 34.59 Y C2F3430CDDD 1,429. 1,570. 1,649.
369 34.59 C2F3436EDDD 1,523. 1,674. 1,759.
369 34.59 Y C2F3436CDDD 1,586. 1,749. 1,830.
429 34.59 C2F3442EDDD 1,659. 1,823. 1,915.
429 34.59 Y C2F3442CDDD 1,719. 1,890. 1,986.
Order Code
34.5( High Calibre Front LateralFiles
Example: C2F3430CDDD-115
C Calibre Front
2 Generation Code
F File
34 34.59 High
30 309 Wide
C Knoll Lock
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see custom colorpolicy page 14)
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three high) should beweighted with a counterweight (seeAccessories, page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 34 11/329Actual Inside Case Height 31 1/29
Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
21
Cal
ibre
File
Col
lect
ion
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files399 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
399 high lateral file, 3-129 drawers with hangingrails
309 399 C2F3930ECCC $1,377. $1,518. $1,592.
309 399 Y C2F3930CCCC 1,436. 1,584. 1,665.
369 399 C2F3936ECCC 1,530. 1,688. 1,779.
369 399 Y C2F3936CCCC 1,598. 1,762. 1,851.
429 399 C2F3942ECCC 1,675. 1,849. 1,932.
429 399 Y C2F3942CCCC 1,739. 1,917. 2,014.
399 high lateral file, 3-129 receding doors withpullout shelves
309 399 C2F3930EZZZ 1,599. 1,765. 1,854.
309 399 Y C2F3930CZZZ 1,663. 1,835. 1,928.
369 399 C2F3936EZZZ 1,763. 1,939. 2,042.
369 399 Y C2F3936CZZZ 1,826. 2,014. 2,119.
429 399 C2F3942EZZZ 1,901. 2,096. 2,193.
429 399 Y C2F3942CZZZ 1,964. 2,168. 2,274.
399 high lateral file, 1-159 receding door withfixed shelf, 2-10.59 drawers with hanging rails
309 399 C2F3930ELDD 1,454. 1,611. 1,692.
309 399 Y C2F3930CLDD 1,521. 1,672. 1,756.
369 399 C2F3936ELDD 1,622. 1,790. 1,882.
369 399 Y C2F3936CLDD 1,684. 1,854. 1,945.
429 399 C2F3942ELDD 1,910. 2,107. 2,214.
429 399 Y C2F3942CLDD 1,976. 2,170. 2,277.
Order Code
39( High Calibre Front LateralFiles
Example: C2F3930CCCC-115
C Calibre Front
2 Generation Code
F File
39 399 High
30 309 Wide
C Knoll Lock
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing.)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints (see color policy page14)
Application Notes
Multiple freestanding files orcabinets ( not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a couterweight (seeAccessories, page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 38 27/329Actual Inside Case Height 369
Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
22
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files399 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
399 high lateral file, 1-13.59 receding door withfixed shelf, 1-129 drawer with hanging rails,1-10.59 drawer with hanging rails
309 399 C2F3930EMCD $1,454. $1,611. $1,692.
309 399 Y C2F3930CMCD 1,521. 1,672. 1,756.
369 399 C2F3936EMCD 1,622. 1,790. 1,882.
369 399 Y C2F3936CMCD 1,684. 1,854. 1,945.
429 399 C2F3942EMCD 1,849. 2,038. 2,141.
429 399 Y C2F3942CMCD 1,912. 2,104. 2,209.
Order Code
39( High Calibre Front LateralFiles
Example: C2F3930CCCC-115
C Calibre Front
2 Generation Code
F File
39 399 High
30 309 Wide
C Knoll Lock
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing.)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints (see color policy page14)
Application Notes
Multiple freestanding files orcabinets ( not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a couterweight (seeAccessories, page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 38 27/329Actual Inside Case Height 369
Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
23
Cal
ibre
File
Col
lect
ion
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files459 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
459 high lateral file, 4-10.59 drawers withhanging rails
309 459 C2F4530EDDDD $1,755. $1,936. $2,036.
309 459 Y C2F4530CDDDD 1,817. 1,996. 2,101.
369 459 C2F4536EDDDD 1,979. 2,182. 2,294.
369 459 Y C2F4536CDDDD 2,040. 2,243. 2,358.
429 459 C2F4542EDDDD 2,209. 2,436. 2,560.
429 459 Y C2F4542CDDDD 2,273. 2,499. 2,625.
459 high lateral file, 1-13.59 receding door withfixed shelf, 1-1.59 tie bar, 2-13.59 receding doorswith fixed shelves
309 459 C2F4530EMKMM 1,714. 1,890. 1,988.
309 459 Y C2F4530CMKMM 1,780. 1,953. 2,055.
369 459 C2F4536EMKMM 1,812. 2,001. 2,106.
369 459 Y C2F4536CMKMM 1,875. 2,065. 2,169.
429 459 C2F4542EMKMM 2,096. 2,314. 2,429.
429 459 Y C2F4542CMKMM 2,162. 2,378. 2,497.
Order Code
45( High Calibre Front LateralFiles
Example: C2F4530CDDDD-115
C Calibre Front
2 Generation Code
F File
45 459 High
30 309 Wide
C Knoll Lock
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
For reference shelf option substitutethe ‘‘K’’ in the pattern number witha ‘‘J’’. Add $178 list for referenceshelf.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 44 27/329Actual Inside Case Height 429
Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
24
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files519 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
519 high lateral file, 4-129 drawers with hangingrails
309 519 C2F5130ECCCC $1,772. $1,947. $2,053.
309 519 Y C2F5130CCCCC 1,835. 2,021. 2,125.
369 519 C2F5136ECCCC 1,991. 2,197. 2,310.
369 519 Y C2F5136CCCCC 2,060. 2,270. 2,382.
429 519 C2F5142ECCCC 2,226. 2,452. 2,569.
429 519 Y C2F5142CCCCC 2,286. 2,522. 2,647.
519 high lateral file, 4-129 receding doors withrollout shelves
309 519 C2F5130EZZZZ 2,072. 2,281. 2,400.
309 519 Y C2F5130CZZZZ 2,132. 2,356. 2,475.
369 519 C2F5136EZZZZ 2,301. 2,531. 2,663.
369 519 Y C2F5136CZZZZ 2,366. 2,602. 2,738.
429 519 C2F5142EZZZZ 2,522. 2,783. 2,919.
429 519 Y C2F5142CZZZZ 2,588. 2,852. 2,993.
519 high lateral file, 2-13.59 receding doors withfixed shelf, 2-10.59 drawers with hanging rails
309 519 C2F5130EMMDD 1,762. 1,944. 2,045.
309 519 Y C2F5130CMMDD 1,825. 2,008. 2,109.
369 519 C2F5136EMMDD 2,120. 2,338. 2,458.
369 519 Y C2F5136CMMDD 2,183. 2,401. 2,521.
429 519 C2F5142EMMDD 2,452. 2,701. 2,838.
429 519 Y C2F5142CMMDD 2,514. 2,764. 2,901.
Order Code
51( High Calibre Front LateralFiles
Example: C2F5130CCCC-115
C Calibre Front
2 Generation Code
F File
51 519 High
30 309 Wide
C Knoll Lock
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing.)
Specification Information
P1= painted finishes
P2= painted finishes
P3 = painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see custom colorpolicy page 14)
For reference shelf option substitutethe ‘‘K’’ in the pattern number witha ‘‘J’’. Add $178 list for referenceshelf.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three high) should beweighted with a counterweight (seeAccessories, page 76)
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 50 27/329Actual Inside Case Height 489
Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
25
Cal
ibre
File
Col
lect
ion
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files519 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
519 high lateral file, 1-10.59 drawer, 1-1.59 tiebar, 3-129 drawers with hanging rails
309 519 C2F5130EDKCCC $1,815. $2,003. $2,109.
309 519 Y C2F5130CDKCCC 1,880. 2,069. 2,171.
369 519 C2F5136EDKCCC 2,118. 2,334. 2,454.
369 519 Y C2F5136CDKCCC 2,176. 2,398. 2,516.
429 519 C2F5142EDKCCC 2,352. 2,591. 2,727.
429 519 Y C2F5142CDKCCC 2,415. 2,657. 2,788.
519 high lateral file, 1-13.59 receding door withfixed shelf, 1-1.59 tie bar, 1-129 drawer, 2-10.59drawers with hanging rails
309 519 C2F5130EMKCDD 1,817. 2,004. 2,112.
309 519 Y C2F5130CMKCDD 1,882. 2,072. 2,172.
369 519 C2F5136EMKCDD 2,170. 2,393. 2,516.
369 519 Y C2F5136CMKCDD 2,233. 2,459. 2,582.
429 519 C2F5142EMKCDD 2,496. 2,751. 2,890.
429 519 Y C2F5142CMKCDD 2,558. 2,815. 2,956.
519 high lateral file, 1-159 receding door withfixed shelf, 1-1.59 tie bar, 3-10.59 drawers withhanging rails
309 519 C2F5130ELKDDD 1,817. 2,004. 2,112.
309 519 Y C2F5130CLKDDD 1,882. 2,072. 2,172.
369 519 C2F5136ELKDDD 2,170. 2,393. 2,516.
369 519 Y C2F5136CLKDDD 2,233. 2,459. 2,582.
429 519 C2F5142ELKDDD 2,496. 2,751. 2,890.
429 519 Y C2F5142CLKDDD 2,558. 2,815. 2,956.
Order Code
51( High Calibre Front LateralFiles
Example: C2F5130CCCC-115
C Calibre Front
2 Generation Code
F File
51 519 High
30 309 Wide
C Knoll Lock
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing.)
Specification Information
P1= painted finishes
P2= painted finishes
P3 = painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see custom colorpolicy page 14)
For reference shelf option substitutethe ‘‘K’’ in the pattern number witha ‘‘J’’. Add $178 list for referenceshelf.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three high) should beweighted with a counterweight (seeAccessories, page 76)
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 50 27/329Actual Inside Case Height 489
Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
26
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files549 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
549 high lateral file, 1-13.59 receding door withfixed shelf, 1-1.59 tie bar, 3-129 drawers withhanging rails
309 549 C2F5430EMKCCC $1,841. $2,030. $2,132.
309 549 Y C2F5430CMKCCC 1,907. 2,091. 2,201.
369 549 C2F5436EMKCCC 2,174. 2,400. 2,522.
369 549 Y C2F5436CMKCCC 2,240. 2,463. 2,587.
429 549 C2F5442EMKCCC 2,486. 2,745. 2,884.
429 549 Y C2F5442CMKCCC 2,552. 2,806. 2,948.
549 high lateral file, 1-159 receding door withfixed shelf, 3-129 drawers with hanging rails
309 549 C2F5430ELCCC 1,781. 1,964. 2,065.
309 549 Y C2F5430CLCCC 1,846. 2,028. 2,128.
369 549 C2F5436ELCCC 2,115. 2,333. 2,453.
369 549 Y C2F5436CLCCC 2,175. 2,395. 2,515.
429 549 C2F5442ELCCC 2,482. 2,737. 2,880.
429 549 Y C2F5442CLCCC 2,547. 2,800. 2,944.
549 high lateral file, 2-13.59 receding doors withfixed shelves, 2-129 drawers with hanging rails
309 549 C2F5430EMMCC 2,025. 2,234. 2,351.
309 549 Y C2F5430CMMCC 2,088. 2,301. 2,414.
369 549 C2F5436EMMCC 2,158. 2,378. 2,501.
369 549 Y C2F5436CMMCC 2,219. 2,442. 2,566.
429 549 C2F5442EMMCC 2,415. 2,663. 2,797.
429 549 Y C2F5442CMMCC 2,479. 2,728. 2,863.
Order Code
54( High Calibre Front LateralFiles
Example: C2F54130CMMCC-115
C Calibre Front
2 Generation Code
F File
54 54( High
30 30( Wide
C Knoll Lock
M 13.5( Receding Doorwith Fixed Shelf
M 13.5( Receding Doorwith Fixed Shelf
C 12( Drawer withHanging Rails
C 12( Drawer withHanging Rails
115 Medium Grey (P1 paintpricing.)
Specification Information
P1= painted finishes
P2= painted finishes
P3 = painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see custom colorpolicy page 14)
For reference shelf option substitutethe ‘‘K’’ in the pattern number witha ‘‘J’’. Add $178 list for referenceshelf.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three high) should beweighted with a counterweight (seeAccessories, page 76)
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 53 27/329Actual Inside Case Height 519
Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
27
Cal
ibre
File
Col
lect
ion
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files55.59 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
55.59 high lateral file, 1-159 receding door withfixed shelves, 1-1.59tie bar, 3-129 drawers withhanging rails
309 55.59 C2F5530ELKCCC $1,853. $2,045. $2,147.
309 55.59 Y C2F5530CLKCCC 1,917. 2,109. 2,213.
369 55.59 C2F5536ELKCCC 2,182. 2,408. 2,529.
369 55.59 Y C2F5536CLKCCC 2,243. 2,469. 2,591.
429 55.59 C2F5542ELKCCC 2,516. 2,776. 2,918.
429 55.59 Y C2F5542CLKCCC 2,582. 2,838. 2,979.
55.59 high lateral file, 2-13.59 receding doorswith fixed shelf, 1-1.59 tie bar, 2-129 drawers withhanging rails
309 55.59 C2F5530EMMKCC 1,854. 2,046. 2,154.
309 55.59 Y C2F5530CMMKCC 1,918. 2,112. 2,214.
369 55.59 C2F5536EMMKCC 2,193. 2,416. 2,542.
369 55.59 Y C2F5536CMMKCC 2,252. 2,480. 2,607.
429 55.59 C2F5542EMMKCC 2,537. 2,796. 2,944.
429 55.59 Y C2F5542CMMKCC 2,602. 2,860. 3,007.
55.59 high lateral file, 5-10.59 drawers withhanging rails
309 55.59 C2F5530EDDDDD 1,991. 2,202. 2,312.
309 55.59 Y C2F5530CDDDDD 2,060. 2,267. 2,377.
369 55.59 C2F5536EDDDDD 2,241. 2,474. 2,597.
369 55.59 Y C2F5536CDDDDD 2,306. 2,536. 2,662.
429 55.59 C2F5542EDDDDD 2,486. 2,745. 2,884.
429 55.59 Y C2F5542CDDDDD 2,552. 2,806. 2,948.
Order Code
55.5( High Calibre Front LateralFiles
Example: C2F5530CDDDDD-115
C Calibre Front
2 Generation Code
F File
55 55.59 High
30 309 Wide
C Knoll Lock
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing.)
Specification Information
P1= painted finishes
P2= painted finishes
P3 = painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see custom colorpolicy page 14)
For reference shelf option substitutethe ‘‘K’’ in the pattern number witha ‘‘J’’. Add $178 list for referenceshelf.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three high) should beweighted with a counterweight (seeAccessories, page 76)
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 55 11/329Actual Inside Case Height 52 1/29
Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
28
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files58.59 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
58.59 high lateral file, 1-13.59 receding door withfixed shelf, 4-10.59 drawers with hanging rails
309 58.59 C2F5830EMDDDD $2,099. $2,315. $2,436.
309 58.59 Y C2F5830CMDDDD 2,165. 2,379. 2,499.
369 58.59 C2F5836EMDDDD 2,459. 2,707. 2,847.
369 58.59 Y C2F5836CMDDDD 2,522. 2,776. 2,915.
429 58.59 C2F5842EMDDDD 2,665. 2,936. 3,089.
429 58.59 Y C2F5842CMDDDD 2,730. 3,006. 3,155.
58.59 high lateral file, 1-13.59 receding door withfixed shelf, 1-1.59 tie bar, 3-13.59 receding doorswith fixed shelf
309 58.59 C2F5830EMKMMM 1,880. 2,076. 2,183.
309 58.59 Y C2F5830CMKMMM 1,944. 2,136. 2,244.
369 58.59 C2F5836EMKMMM 2,232. 2,462. 2,588.
369 58.59 Y C2F5836CMKMMM 2,296. 2,524. 2,653.
429 58.59 C2F5842EMKMMM 2,597. 2,863. 3,015.
429 58.59 Y C2F5842CMKMMM 2,662. 2,925. 3,075.
58.59 high lateral file, 1-129 drawer with hangingrails, 1-10.59 drawer, 1-1.59 tie bar, 3-10.59drawers with hanging rails
309 58.59 C2F5830ECDKDDD 2,130. 2,353. 2,475.
309 58.59 Y C2F5830CCDKDDD 2,197. 2,416. 2,537.
369 58.59 C2F5836ECDKDDD 2,385. 2,633. 2,769.
369 58.59 Y C2F5836CCDKDDD 2,453. 2,699. 2,833.
429 58.59 C2F5842ECDKDDD 2,637. 2,910. 3,057.
429 58.59 Y C2F5842CCDKDDD 2,702. 2,972. 3,121.
Order Code
58.5( High Calibre Front LateralFiles
Example: C2F5830CAAKCC-115
C Calibre Front
2 Generation Code
F File
58 58.59 High
30 309 Wide
C Knoll Lock
A 10.59 Drawer withHanging Rails
A 10.59 Drawer withHanging Rails
K 1.59 Tie bar
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
For reference shelf option substitutethe ‘‘K’’ in the pattern number witha ‘‘J’’. Add $178 list for referenceshelf.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 58 11/329Actual Inside Case Height 55 1/29Calibre files are189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
29
Cal
ibre
File
Col
lect
ion
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files58.59 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
58.59 high lateral file, 2-159 drawers withhanging rails, 1-1.59 tie bar, 2-129 drawers withhanging rails
309 58.59 C2F5830EAAKCC $2,069. $2,280. $2,400.
309 58.59 Y C2F5830CAAKCC 2,130. 2,345. 2,463.
369 58.59 C2F5836EAAKCC 2,270. 2,501. 2,631.
369 58.59 Y C2F5836CAAKCC 2,333. 2,566. 2,695.
429 58.59 C2F5842EAAKCC 2,444. 2,699. 2,835.
429 58.59 Y C2F5842CAAKCC 2,510. 2,762. 2,899.
58.59 high lateral file, 3-10.59 drawers withhanging rails, 2-129 drawers with hanging rails
309 58.59 C2F5830EDDDCC 2,017. 2,226. 2,338.
309 58.59 Y C2F5830CDDDCC 2,081. 2,285. 2,401.
369 58.59 C2F5836EDDDCC 2,268. 2,499. 2,627.
369 58.59 Y C2F5836CDDDCC 2,332. 2,564. 2,694.
429 58.59 C2F5842EDDDCC 2,512. 2,771. 2,914.
429 58.59 Y C2F5842CDDDCC 2,574. 2,834. 2,976.
Order Code
58.5( High Calibre Front LateralFiles
Example: C2F5830CAAKCC-115
C Calibre Front
2 Generation Code
F File
58 58.59 High
30 309 Wide
C Knoll Lock
A 10.59 Drawer withHanging Rails
A 10.59 Drawer withHanging Rails
K 1.59 Tie bar
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
For reference shelf option substitutethe ‘‘K’’ in the pattern number witha ‘‘J’’. Add $178 list for referenceshelf.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 58 11/329Actual Inside Case Height 55 1/29Calibre files are189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
30
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files639 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
639 high lateral file, 1-129 receding door withpullout shelf, 4-129 drawers with hanging rails
309 639 C2F6330EZCCCC $2,122. $2,340. $2,458.
309 639 Y C2F6330CZCCCC 2,185. 2,409. 2,529.
369 639 C2F6336EZCCCC 2,378. 2,619. 2,752.
369 639 Y C2F6336CZCCCC 2,442. 2,690. 2,827.
429 639 C2F6342EZCCCC 2,661. 2,932. 3,077.
429 639 Y C2F6342CZCCCC 2,724. 3,000. 3,151.
639 high lateral file, 5-129 receding doors withfixed shelves
309 639 C2F6330ENNNNN 2,112. 2,327. 2,448.
309 639 Y C2F6330CNNNNN 2,172. 2,390. 2,512.
369 639 C2F6336ENNNNN 2,457. 2,705. 2,844.
369 639 Y C2F6336CNNNNN 2,520. 2,772. 2,912.
429 639 C2F6342ENNNNN 2,958. 3,258. 3,428.
429 639 Y C2F6342CNNNNN 3,024. 3,326. 3,491.
Order Code
63( High Calibre Front LateralFiles
Example: C2F6330CMMKDDD-115
C Calibre Front
2 Generation Code
F File
63 639 High
30 309 Wide
C Knoll Lock
M 13.59 Receding Doorwith Fixed Shelf
M 13.59 Receding Doorwith Fixed Shelf
K 1.59 Tie bar
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
For reference shelf option substitutethe ‘‘K’’ in the pattern number witha ‘‘J’’. Add $178 list for referenceshelf.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 62 27/329Actual Inside Case Height 609Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
31
Cal
ibre
File
Col
lect
ion
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files639 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
639 high lateral file, 5-129 receding doors withrollout shelves
309 639 C2F6330EZZZZZ $2,422. $2,671. $2,805.
309 639 Y C2F6330CZZZZZ 2,482. 2,739. 2,880.
369 639 C2F6336EZZZZZ 2,687. 2,952. 3,106.
369 639 Y C2F6336CZZZZZ 2,750. 3,024. 3,180.
429 639 C2F6342EZZZZZ 2,959. 3,268. 3,423.
429 639 Y C2F6342CZZZZZ 3,024. 3,339. 3,498.
639 high lateral file, 1-159 receding door withfixed shelf, 3-159 drawers with hanging rails
309 639 C2F6330ELAAA 2,023. 2,231. 2,345.
309 639 Y C2F6330CLAAA 2,085. 2,295. 2,411.
369 639 C2F6336ELAAA 2,321. 2,558. 2,691.
369 639 Y C2F6336CLAAA 2,382. 2,624. 2,753.
429 639 C2F6342ELAAA 2,712. 2,991. 3,148.
429 639 Y C2F6342CLAAA 2,779. 3,057. 3,209.
Order Code
63( High Calibre Front LateralFiles
Example: C2F6330CMMKDDD-115
C Calibre Front
2 Generation Code
F File
63 639 High
30 309 Wide
C Knoll Lock
M 13.59 Receding Doorwith Fixed Shelf
M 13.59 Receding Doorwith Fixed Shelf
K 1.59 Tie bar
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
For reference shelf option substitutethe ‘‘K’’ in the pattern number witha ‘‘J’’. Add $178 list for referenceshelf.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 62 27/329Actual Inside Case Height 609Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
32
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files639 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
639 high lateral file, 4-159 receding doors withfixed shelf
309 639 C2F6330ELLLL $1,968. $2,170. $2,280.
309 639 Y C2F6330CLLLL 2,031. 2,233. 2,345.
369 639 C2F6336ELLLL 2,296. 2,532. 2,662.
369 639 Y C2F6336CLLLL 2,363. 2,596. 2,727.
429 639 C2F6342ELLLL 2,661. 2,932. 3,085.
429 639 Y C2F6342CLLLL 2,726. 2,994. 3,150.
639 high lateral file, 1-13.59 receding door withfixed shelf, 1-10.59 drawer, 3-129 drawers withhanging rails
309 639 C2F6330EMDCCC 2,197. 2,423. 2,547.
309 639 Y C2F6330CMDCCC 2,263. 2,486. 2,611.
369 639 C2F6336EMDCCC 2,454. 2,704. 2,842.
369 639 Y C2F6336CMDCCC 2,516. 2,771. 2,909.
429 639 C2F6342EMDCCC 2,839. 3,127. 3,293.
429 639 Y C2F6342CMDCCC 2,903. 3,194. 3,353.
Order Code
63( High Calibre Front LateralFiles
Example: C2F6330CMMKDDD-115
C Calibre Front
2 Generation Code
F File
63 639 High
30 309 Wide
C Knoll Lock
M 13.59 Receding Doorwith Fixed Shelf
M 13.59 Receding Doorwith Fixed Shelf
K 1.59 Tie bar
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
For reference shelf option substitutethe ‘‘K’’ in the pattern number witha ‘‘J’’. Add $178 list for referenceshelf.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 62 27/329Actual Inside Case Height 609Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
33
Cal
ibre
File
Col
lect
ion
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files639 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
639 high lateral file, 2-13.59 receding doors withfixed shelves, 1-1.59 tie bar, 3-10.59 drawers withhanging rails
309 639 C2F6330EMMKDDD $2,171. $2,395. $2,520.
309 639 Y C2F6330CMMKDDD 2,234. 2,461. 2,584.
369 639 C2F6336EMMKDDD 2,537. 2,796. 2,944.
369 639 Y C2F6336CMMKDDD 2,602. 2,860. 3,007.
429 639 C2F6342EMMKDDD 2,924. 3,225. 3,386.
429 639 Y C2F6342CMMKDDD 2,988. 3,292. 3,452.
639 high lateral file, 1-129 receding door withfixed shelf, 4-129 drawers with hanging rails
309 639 C2F6330ENCCCC 2,122. 2,342. 2,462.
309 639 Y C2F6330CNCCCC 2,187. 2,408. 2,524.
369 639 C2F6336ENCCCC 2,378. 2,624. 2,758.
369 639 Y C2F6336CNCCCC 2,442. 2,688. 2,821.
429 639 C2F6342ENCCCC 2,659. 2,928. 3,083.
429 639 Y C2F6342CNCCCC 2,724. 2,993. 3,144.
Order Code
63( High Calibre Front LateralFiles
Example: C2F6330CMMKDDD-115
C Calibre Front
2 Generation Code
F File
63 639 High
30 309 Wide
C Knoll Lock
M 13.59 Receding Doorwith Fixed Shelf
M 13.59 Receding Doorwith Fixed Shelf
K 1.59 Tie bar
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
For reference shelf option substitutethe ‘‘K’’ in the pattern number witha ‘‘J’’. Add $178 list for referenceshelf.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 62 27/329Actual Inside Case Height 609Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
34
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files64.59 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
64.59 high lateral file, 1-13.59 receding door withfixed shelf, 4-129 drawers with hanging rails
309 64.59 C2F6430EMCCCC $2,212. $2,438. $2,564.
309 64.59 Y C2F6430CMCCCC 2,275. 2,502. 2,627.
369 64.59 C2F6436EMCCCC 2,469. 2,724. 2,860.
369 64.59 Y C2F6436CMCCCC 2,532. 2,785. 2,924.
429 64.59 C2F6442EMCCCC 2,756. 3,037. 3,193.
429 64.59 Y C2F6442CMCCCC 2,820. 3,102. 3,255.
64.59 high lateral file, 1-129 receding door withfixed shelves, 1-129 Drawer, 1-1.59 tie bar, 3-129drawers with hanging rails
309 64.59 C2F6430ENCKCCC 2,136. 2,360. 2,479.
309 64.59 Y C2F6430CNCKCCC 2,203. 2,423. 2,543.
369 64.59 C2F6436ENCKCCC 2,479. 2,734. 2,878.
369 64.59 Y C2F6436CNCKCCC 2,543. 2,796. 2,935.
429 64.59 C2F6442ENCKCCC 2,847. 3,141. 3,302.
429 64.59 Y C2F6442CNCKCCC 2,915. 3,206. 3,365.
Order Code
64.5( High Calibre Front LateralFiles
Example: C2F6430CNCKCCC-115
C Calibre Front
2 Generation Code
F File
64 649 High
30 309 Wide
C Knoll Lock
N 129 Receding Door withFixed Shelf
C 129 Drawer withHanging Rails
K 1.59 Tie bar
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
For reference shelf option substitutethe ‘‘K’’ in the pattern number witha ‘‘J’’. Add $178 list for referenceshelf.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 64 11/329Actual Inside Case Height 61 1/29Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
35
Cal
ibre
File
Col
lect
ion
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files64.59 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
64.59 high lateral file, 2-129 receding doors withfixed shelves,1-1.59 tie bar, 3-129 receding doorswith fixed shelves
309 64.59 C2F6430ENNKNNN $2,136. $2,360. $2,479.
309 64.59 Y C2F6430CNNKNNN 2,203. 2,423. 2,543.
369 64.59 C2F6436ENNKNNN 2,521. 2,778. 2,920.
369 64.59 Y C2F6436CNNKNNN 2,586. 2,842. 2,984.
429 64.59 C2F6442ENNKNNN 2,821. 3,108. 3,269.
429 64.59 Y C2F6442CNNKNNN 2,886. 3,174. 3,337.
64.59 high lateral file, 2-129 receding doors withpullout shelves,1-1.59 tie bar, 3-129 recedingdoors with pullout shelves
309 64.59 C2F6430EZZKZZZ 2,323. 2,560. 2,694.
309 64.59 Y C2F6430CZZKZZZ 2,384. 2,625. 2,756.
369 64.59 C2F6436EZZKZZZ 2,611. 2,883. 3,026.
369 64.59 Y C2F6436CZZKZZZ 2,674. 2,947. 3,089.
429 64.59 C2F6442EZZKZZZ 2,914. 3,208. 3,374.
429 64.59 Y C2F6442CZZKZZZ 2,976. 3,271. 3,437.
Order Code
64.5( High Calibre Front LateralFiles
Example: C2F6430CNCKCCC-115
C Calibre Front
2 Generation Code
F File
64 649 High
30 309 Wide
C Knoll Lock
N 129 Receding Door withFixed Shelf
C 129 Drawer withHanging Rails
K 1.59 Tie bar
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
For reference shelf option substitutethe ‘‘K’’ in the pattern number witha ‘‘J’’. Add $178 list for referenceshelf.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 64 11/329Actual Inside Case Height 61 1/29Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
36
Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files64.59 High Calibre Front Lateral Files
description w h lock pattern no. P1 P2 P3
64.59 high lateral file, 2-159 receding doors withfixed shelves, 3-10.59 drawers with hanging rails
309 64.59 C2F6430ELLDDD $2,115. $2,333. $2,453.
309 64.59 Y C2F6430CLLDDD 2,175. 2,395. 2,515.
369 64.59 C2F6436ELLDDD 2,475. 2,728. 2,870.
369 64.59 Y C2F6436CLLDDD 2,537. 2,792. 2,928.
429 64.59 C2F6442ELLDDD 2,860. 3,156. 3,313.
429 64.59 Y C2F6442CLLDDD 2,924. 3,220. 3,378.
64.59 high lateral file, 3-13.59 receding doorswith fixed shelves, 2-10.59 drawers with hangingrails
309 64.59 C2F6430EMMMDD 2,118. 2,334. 2,454.
309 64.59 Y C2F6430CMMMDD 2,176. 2,398. 2,516.
369 64.59 C2F6436EMMMDD 2,486. 2,745. 2,884.
369 64.59 Y C2F6436CMMMDD 2,552. 2,806. 2,948.
429 64.59 C2F6442EMMMDD 2,884. 3,176. 3,340.
429 64.59 Y C2F6442CMMMDD 2,948. 3,241. 3,402.
Order Code
64.5( High Calibre Front LateralFiles
Example: C2F6430CNCKCCC-115
C Calibre Front
2 Generation Code
F File
64 649 High
30 309 Wide
C Knoll Lock
N 129 Receding Door withFixed Shelf
C 129 Drawer withHanging Rails
K 1.59 Tie bar
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
For reference shelf option substitutethe ‘‘K’’ in the pattern number witha ‘‘J’’. Add $178 list for referenceshelf.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.
Critical Dimensions
Actual Outside Case Height 64 11/329Actual Inside Case Height 61 1/29Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
37
Cal
ibre
File
Col
lect
ion
Calibre Front Hybrids55.59 High Calibre Front Hybrid Units
description w h lock pattern no. P1 P2 P3
55.59 high hybrid with 31.59 storage doors and2-10.59 drawers with hanging rails (oneadjustable shelf)
309 55.59 C2H5530EXDD $1,941. $2,135. $2,243.
309 55.59 Y C2H5530CXDD 2,010. 2,209. 2,316.
369 55.59 C2H5536EXDD 2,209. 2,431. 2,548.
369 55.59 Y C2H5536CXDD 2,275. 2,501. 2,628.
55.59 high hybrid with 219 storage doors and3-10.59 drawers with hanging rails (no shelf)
309 55.59 C2H5530EVDDD 2,139. 2,349. 2,469.
309 55.59 Y C2H5530CVDDD 2,208. 2,427. 2,547.
369 55.59 C2H5536EVDDD 2,478. 2,728. 2,867.
369 55.59 Y C2H5536CVDDD 2,543. 2,802. 2,942.
Order Code
55.5( High Calibre Front HybridUnit
Example: C2H5530CVDDD-115
C Calibre Front
2 Generation Code
H Hybrid
55 55.59 High
30 309 Wide
C Knoll Lock
V 219 Storage doors
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
D 10.59 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
Calibre Hybrids are shipped withtwo locks that are random keyed.For units with like keys, pleaseconsult the Keyed Alike policy.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying.
Critical Dimensions
Actual Outside Case Height 55 11/329Actual Inside Case Height 52 1/29Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not inlcuded withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
38
Calibre Front Hybrids639 High Calibre Front Hybrid Units
description w h lock pattern no. P1 P2 P3
639 high hybrid unit with 369 storage doors and2-129 drawers with hanging rails (2 adjustableshelves)
309 639 C2H6330ETCC $2,035. $2,240. $2,354.
309 639 Y C2H6330CTCC 2,102. 2,312. 2,431.
369 639 C2H6336ETCC 2,312. 2,543. 2,675.
369 639 Y C2H6336CTCC 2,380. 2,624. 2,750.
639 high hybrid unit with 249 storage doors and3-129 drawers with hanging rails (1 adjustableshelf)
309 639 C2H6330ERCCC 2,258. 2,482. 2,606.
309 639 Y C2H6330CRCCC 2,328. 2,558. 2,683.
369 639 C2H6336ERCCC 2,571. 2,822. 2,968.
369 639 Y C2H6336CRCCC 2,639. 2,901. 3,044.
Order Code
63( High Calibre Front Hybrid Unit
Example: C2H6330CRCCC-115
C Calibre Front
2 Generation Code
H Hybrid
63 639 High
30 309 Wide
C Knoll Lock
R 249 Storage doors
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
Calibre Hybrids are shipped withtwo locks that are random keyed.For units with like keys, pleaseconsult the Keyed Alike policy.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Critical Dimensions
Actual Outside Case Height 62 27/329Actual Inside Case Height 609Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not inlcuded withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
39
Cal
ibre
File
Col
lect
ion
Calibre Front Hybrids64.59 High Calibre Front Hybrid Units
description w h lock pattern no. P1 P2 P3
64.59 high hybrid unit with 37.59 storage doorsand 2-129 drawers with hanging rails (2adjustable shelves)
309 64.59 C2H6430EUCC $2,035. $2,240. $2,354.
309 64.59 Y C2H6430CUCC 2,102. 2,312. 2,431.
369 64.59 C2H6436EUCC 2,312. 2,543. 2,675.
369 64.59 Y C2H6436CUCC 2,380. 2,624. 2,750.
64.59 high hybrid unit with 25.59 storage doorsand 3-129 drawers with hanging rails (1adjustable shelf)
309 64.59 C2H6430ESCCC 2,258. 2,482. 2,606.
309 64.59 Y C2H6430CSCCC 2,328. 2,558. 2,683.
369 64.59 C2H6436ESCCC 2,571. 2,822. 2,968.
369 64.59 Y C2H6436CSCCC 2,639. 2,901. 3,044.
Order Code
64.5( High Calibre Front HybridUnit
Example: C2H6430CSCCC-115
C Calibre Front
2 Generation Code
H Hybrid
64 649 High
30 309 Wide
C Knoll Lock
S 25.59 Storage doors
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
Calibre Hybrids are shipped withtwo locks that are random keyed.For like locks please consult theKnoll Keyed Alike policy.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.
See KnollKey lock program on page137 for keying information.
Critical Dimensions
Actual Outside Case Height 64 11/329Actual Inside Case Height 61 1/29Calibre files are 189 deep.
Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not inlcuded withfiles. Please see Accessories page76.
Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.
Calibre
40
Calibre Front Cabinets279 High Calibre Front Cabinets
description w h lock pattern no. P1 P2 P3
279 high cabinet with 1 adjustable shelf and nodoors
309 279 C2C2730 $944. $1,041. $1,093.
369 279 C2C2736 981. 1,074. 1,127.
279 high cabinet with 1 adjustable shelf anddoors
309 279 C2C2730E 1,059. 1,164. 1,222.
309 279 Y C2C2730C 1,146. 1,261. 1,323.
369 279 C2C2736E 1,087. 1,196. 1,261.
369 279 Y C2C2736C 1,173. 1,290. 1,356.
Order Code
27( High Calibre Front Cabinets
Example: C2C2730C-115
C Calibre
2 Generation
C Cabinet
27 279 High Case
30 309 Wide Case
C Locking with Doors
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Shelves adjustable on 2 1/29increments.
Cabinet shelves are black. To matchshelves to case color, add ‘‘P’’ suffixto pattern number and $51 to listprice.
One shelf area of 279 high unit isintended for storage of item 109 orless in height. Height of unitmatches that of corresponding fileunit.
See KnollKey lock program on page137 for keying information.
Critical Dimensions
Actual Outside Case Height 26 27/329Actual Inside Case Height 249
Calibre cabinets are 189 deep.
Calibre
41
Cal
ibre
File
Col
lect
ion
Calibre Front Cabinets34.59 High Calibre Front Cabinets
description w h lock pattern no. P1 P2 P3
34.59 high cabinet with 1 adjustable shelf and nodoors
309 34.59 C2C3430 $964. $1,065. $1,118.
369 34.59 C2C3436 985. 1,079. 1,137.
34.59 high cabinet with 1 adjustable shelf anddoors
309 34.59 C2C3430E 1,159. 1,276. 1,341.
309 34.59 Y C2C3430C 1,239. 1,365. 1,433.
369 34.59 C2C3436E 1,171. 1,289. 1,353.
369 34.59 Y C2C3436C 1,260. 1,384. 1,453.
Order Code
34.5( High Calibre Front Cabinets
Example: C2C3430C-115
C Calibre
2 Generation
C Cabinet
34 34.59 High Case
30 309 Wide Case
C Locking with Doors
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Shelves adjustable on 2 1/29increments.
Cabinet shelves are black. To matchshelves to case color, add ‘‘P’’ suffixto pattern number and $51 to listprice.
See KnollKey lock program on page137 for keying information.
Critical Dimensions
Actual Outside Case Height 34 11/329Actual Inside Case Height 31 1/29
Calibre cabinets are 189 deep.
Calibre
42
Calibre Front Cabinets399 High Calibre Front Cabinets
description w h lock pattern no. P1 P2 P3
399 high cabinet with 2 adjustable shelves and nodoors
309 399 C2C3930 $1,029. $1,133. $1,187.
369 399 C2C3936 1,057. 1,163. 1,221.
399 high cabinet with 2 adjustable shelves anddoors
309 399 C2C3930E 1,173. 1,290. 1,356.
309 399 Y C2C3930C 1,255. 1,378. 1,450.
369 399 C2C3936E 1,197. 1,323. 1,386.
369 399 Y C2C3936C 1,289. 1,421. 1,491.
Order Code
39( High Calibre Front Cabinets
Example: C2C3930C-115
C Calibre
2 Generation
C Cabinet
39 399 High Case
30 309 Wide Case
C Locking wirh Doors
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Shelves adjustable on 2 1/29increments.
Cabinet shelves are black. To matchshelves to case color, add ‘‘P’’ suffixto pattern number and $51 to listprice.
One shelf area of each unit isintended for storage of item 109 orless in height. Height of unitmatches that of corresponding fileunit.
See KnollKey lock program on page137 for keying information.
Critical Dimensions
Actual Outside Case Height 38 27/329Actual Inside Case Height 369
Calibre cabinets are 189 deep.
Calibre
43
Cal
ibre
File
Col
lect
ion
Calibre Front Cabinets519 High Calibre Front Cabinets
description w h lock pattern no. P1 P2 P3
519 high cabinet with 2 adjustable shelves and nodoors
309 519 C2C5130 $1,146. $1,261. $1,323.
369 519 C2C5136 1,191. 1,315. 1,377.
519 high cabinet with 2 adjustable shelves anddoors
309 519 C2C5130E 1,304. 1,432. 1,504.
309 519 Y C2C5130C 1,381. 1,520. 1,597.
369 519 C2C5136E 1,357. 1,493. 1,567.
369 519 Y C2C5136C 1,436. 1,583. 1,656.
Order Code
51( High Calibre Front Cabinets
Example: C2C5130C-115
C Calibre
2 Generation
C Cabinet
51 519 High Case
30 309 Wide Case
C Locking with Doors
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Shelves adjustable on 2 1/29increments.
Cabinet shelves are black. To matchshelves to case color, add ‘‘P’’ suffixto pattern number and $51 to listprice.
See KnollKey lock program on page137 for keying information.
Critical Dimensions
Actual Outside Case Height 50 27/329Actual Inside Case Height 489
Calibre cabinets are 189 deep.
Calibre
44
Calibre Front Cabinets55.59 High Calibre Front Cabinets
description w h lock pattern no. P1 P2 P3
55.59 high cabinet with 2 adjustable shelves andno doors
309 55.59 C2C5530 $1,203. $1,321. $1,387.
369 55.59 C2C5536 1,300. 1,428. 1,500.
55.59 high cabinet with 2 adjustable shelves withdoors
309 55.59 C2C5530E 1,418. 1,559. 1,636.
309 55.59 Y C2C5530C 1,495. 1,646. 1,731.
369 55.59 C2C5536E 1,509. 1,656. 1,740.
369 55.59 Y C2C5536C 1,594. 1,755. 1,844.
Order Code
55.5( High Calibre Front Cabinets
Example: C2C5530C-115
C Calibre
2 Generation
C Cabinet
55 55.59 High Case
30 309 Wide Case
C Locking with Doors
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Shelves adjustable on 2 1/29increments.
Cabinet shelves are black. To matchshelves to case color, add ‘‘P’’ suffixto pattern number and $51 to listprice.
See KnollKey lock program on page137 for keying information.
Critical Dimensions
Actual Outside Case Height 55 11/329Actual Inside Case Height 52 1/29
Calibre cabinets are 189 deep.
Calibre
45
Cal
ibre
File
Col
lect
ion
Calibre Front Cabinets639 High Calibre Front Cabinets
description w h lock pattern no. P1 P2 P3
639 high cabinet with 3 adjustable shelves and nodoors
309 639 C2C6330 $1,233. $1,361. $1,432.
369 639 C2C6336 1,331. 1,466. 1,544.
639 high cabinet with 3 adjustable shelves anddoors
309 639 C2C6330E 1,418. 1,559. 1,637.
309 639 Y C2C6330C 1,495. 1,646. 1,731.
369 639 C2C6336E 1,514. 1,660. 1,747.
369 639 Y C2C6336C 1,594. 1,755. 1,844.
Order Code
63( High Calibre Front Cabinets
Example: C2C6330C-115
C Calibre
2 Generation
C Cabinet
63 639 High Case
30 309 Wide Case
C Locking with Doors
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Shelves adjustable on 2 1/29increments.
Cabinet shelves are black. To matchshelves to case color, add ‘‘P’’ suffixto pattern number and $51 to listprice.
See KnollKey lock program on page137 for keying information.
Critical Dimensions
Actual Outside Case Height 62 27/329Actual Inside Case Height 609
Calibre cabinets are 189 deep.
Calibre
46
Calibre Front Cabinets64.59 High Calibre Front Cabinets
description w h lock pattern no. P1 P2 P3
64.59 high cabinet with 3 adjustable shelves andno doors
309 64.59 C2C6430 $1,297. $1,421. $1,490.
369 64.59 C2C6436 1,394. 1,527. 1,598.
64.59 high cabinet with 3 adjustable shelves anddoors
309 64.59 C2C6430E 1,473. 1,615. 1,694.
309 64.59 Y C2C6430C 1,556. 1,702. 1,788.
369 64.59 C2C6436E 1,571. 1,726. 1,805.
369 64.59 Y C2C6436C 1,652. 1,810. 1,901.
Order Code
64.5( High Calibre Front Cabinets
Example: C2C6430C-115
C Calibre
2 Generation
C Cabinet
64 649 High Case
30 309 Wide Case
C Locking with Doors
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).
Shelves adjustable on 2 1/29increments.
Cabinet shelves are black. To matchshelves to case color, add ‘‘P’’ suffixto pattern number and $51 to listprice.
See KnollKey lock program on page137 for keying information.
Critical Dimensions
Actual Outside Case Height 64 11/329Actual Inside Case Height 61 1/29
Calibre cabinets are189 deep.
Calibre
47
Cal
ibre
File
Col
lect
ion
Lateral File Worksurface TopsCalibre Front Lateral File Worksurface TopsDividends Style
description d w h pattern no. list pricewoodgrain
edgemetaledge
Dividends Style Rectangular189d Laminate File Tops for Calibre Front Files
189 1089 1 1/49 CE10818 $529. $582. $637.
189 309 1 1/49 CE3018 204. 229. 247.
189 369 1 1/49 CE3618 233. 256. 278.
189 429 1 1/49 CE4218 251. 274. 298.
189 609 1 1/49 CE6018 319. 354. 386.
189 729 1 1/49 CE7218 366. 403. 442.
189 849 1 1/49 CE8418 410. 452. 491.
189 909 1 1/49 CE9018 418. 461. 503.
Dividends Style Rectangular369d Laminate File Tops for Calibre Front Files
369 1089 1 1/49 CE10836 789. 866. 947.
369 309 1 1/49 CE3036 242. 265. 289.
369 369 1 1/49 CE3636 286. 315. 343.
369 429 1 1/49 CE4236 305. 334. 366.
369 609 1 1/49 CE6036 487. 536. 582.
369 729 1 1/49 CE7236 546. 603. 657.
369 849 1 1/49 CE8436 610. 673. 731.
369 909 1 1/49 CE9036 637. 697. 761.
Order Code
30X18 Equity/Dividends Style FileTops (Calibre Files)
Example: CE3018
CE Equity/Dividend Edge
30 309 Wide
18 189 Deep
Specification Information
CE prefixed lateral file tops aredesigned to be attached to standard189 deep (nominal) Calibre lateralfiles and cabinets. Please note thatCalibre bookcases are 159 deepnominal and will not accept aCalibre lateral file laminate tops.
Application Notes
Designed for use with standard 189deep nominal Calibre lateral filesand cabinets only.
Actual dimensions are listed ininches
Critical Dimensions
NominalDimension
Actual Dimension
30x18 30.000 x 18.00030x36 30.000 x 36.00036x18 36.000 x 18.00036x36 36.000 x 36.00042x18 42.000 x 18.00042x36 42.000 x 36.00060x18 60.000 x 18.00060x36 60.000 x 36.00072x18 72.000 x 18.00072x36 72.000 x 36.00084x18 84.000 x 18.00084x36 84.000 x 36.00090x18 90.000 x 18.00090x36 90.000 x 36.000108x18 108.000 x 18.000108x36 108.000 x 36.000
Calibre
48
Lateral File Worksurface TopsCalibre Front Lateral File Worksurface TopsPostform / Calibre Style
description d w h pattern no. list price
Postform / Calibre Style Rectangular189d Laminate File Tops for Calibre Front Files
189 1089 1 1/49 CM10818 $552.
189 309 1 1/49 CM3018 213.
189 369 1 1/49 CM3618 245.
189 429 1 1/49 CM4218 261.
189 609 1 1/49 CM6018 333.
189 729 1 1/49 CM7218 383.
189 849 1 1/49 CM8418 427.
189 909 1 1/49 CM9018 435.
Postform / Calibre Style Rectangular369d Laminate File Tops for Calibre Front Files
369 1089 1 1/49 CM10836 823.
369 309 1 1/49 CM3036 252.
369 369 1 1/49 CM3636 298.
369 429 1 1/49 CM4236 317.
369 609 1 1/49 CM6036 508.
369 729 1 1/49 CM7236 570.
369 849 1 1/49 CM8436 637.
369 909 1 1/49 CM9036 665.
Order Code
30X18 Morrison/Calibre Style FileTops (Calibre Files)
Example: CME3018
CM Morrison/Calibre Edge
30 309 Wide
18 189 Deep
Specification Information
CM prefixed lateral file tops aredesigned to be attached to standard189 deep (nominal) Calibre lateralfiles and cabinets. Please note thatCalibre bookcases are 159 deepnominal and will not accept aCalibre lateral file laminate tops.
Apllication Notes
Designed for use with standard 189deep nominal Calibre lateral filesand cabinets only.
Actual dimensions are listed ininches
Critical Dimensions
NominalDimension
Actual Dimension
30x18 30.125 x 18.37530x36 30.125 x 36.50036x18 36.125 x 18.37536x36 36.125 x 36.50042x18 42.125 x 18.37542x36 42.125 x 36.50060x18 60.125 x 18.37560x36 60.125 x 36.50072x18 72.125 x 18.37572x36 72.125 x 36.50084x18 84.125 x 18.37584x36 84.125 x 36.50090x18 90.125 x 18.37590x36 90.125 x 36.500108x18 108.125 x 18.375108x36 108.125 x 36.500
Calibre
49
Cal
ibre
File
Col
lect
ion
Lateral File Worksurface TopsCalibre Front Lateral File Worksurface TopsAutoStrada Style
description d w h pattern no. list price
Autostrada Style Rectangular189d Laminate File Tops for Calibre Front Files
189 1089 1 1/49 CA10818 $1,098.
189 309 1 1/49 CA3018 303.
189 369 1 1/49 CA3618 334.
189 429 1 1/49 CA4218 356.
189 609 1 1/49 CA6018 639.
189 729 1 1/49 CA7218 765.
189 849 1 1/49 CA8418 835.
189 909 1 1/49 CA9018 966.
Autostrada Style Rectangular369d Laminate File Tops for Calibre Front Files
369 1089 1 1/49 CA10836 1,443.
369 309 1 1/49 CA3036 549.
369 369 1 1/49 CA3636 605.
369 429 1 1/49 CA4236 654.
369 609 1 1/49 CA6036 897.
369 729 1 1/49 CA7236 995.
369 849 1 1/49 CA8436 1,069.
369 909 1 1/49 CA9036 1,088.
Order Code
30X18 AutoStrada Style FileTops (Calibre Files)
Example: CA3018
CA AutoStrada Edge
30 309 Wide
18 189 Deep
Specification Information
CA prefixed lateral file tops aredesigned to be attached to standard189 deep (nominal) Calibre lateralfiles and cabinets. Please note thatCalibre bookcases are 159 deepnominal and will not accept aCalibre lateral file laminate tops.
Calibre desking surfaces are notdesigned to serve as lateral fileworksurface tops.
Application Notes
Designed for use with standard 189deep nominal Calibre lateral filesand cabinets only.
Actual dimensions are listed ininches
Critical Dimensions
NominalDimension
Actual Dimension
30x18 30.000 x 18.00030x36 30.000 x 36.00036x18 36.000 x 18.00036x36 36.000 x 36.00042x18 42.000 x 18.00042x36 42.000 x 36.00060x18 60.000 x 18.00060x36 60.000 x 36.00072x18 72.000 x 18.00072x36 72.000 x 36.00084x18 84.000 x 18.00084x36 84.000 x 36.00090x18 90.000 x 18.00090x36 90.000 x 36.000108x18 108.000 x 18.000108x36 108.000 x 36.000
Calibre
50
Lateral File Worksurface TopsS2 and Laminate Front Calibre Lateral File Worksurface TopsDividends Style
description d w h pattern no. list pricewoodgrain
edgemetaledge
Dividends Style Rectangular189d Laminate File Tops for S2 andLaminate Front Calibre Files
189 1089 1 1/49 SD10818 $529. $582. $637.
189 309 1 1/49 SD3018 204. 229. 247.
189 369 1 1/49 SD3618 233. 256. 278.
189 429 1 1/49 SD4218 251. 274. 298.
189 609 1 1/49 SD6018 319. 354. 386.
189 729 1 1/49 SD7218 366. 403. 442.
189 729 1 1/49 SD8418 410. 452. 491.
189 909 1 1/49 SD9018 418. 461. 503.
Dividends Style Rectangular369d Laminate File Tops for S2 andLaminate Front Calibre Files
369 1089 1 1/49 SD10836 789. 866. 947.
369 309 1 1/49 SD3036 242. 265. 289.
369 369 1 1/49 SD3636 286. 315. 343.
369 429 1 1/49 SD4236 305. 334. 366.
369 609 1 1/49 SD6036 487. 536. 582.
369 729 1 1/49 SD7236 546. 603. 657.
369 849 1 1/49 SD8436 610. 673. 731.
369 909 1 1/49 SD9036 637. 697. 761.
Order Code
30X18 Dividends Style FileTops (S2 Front Files)
Example: SD3018
SD Dividend Edge
30 309 Wide
18 18 7/89 Deep
Specification Information
SD prefixed lateral file tops aredesigned to be attached to 18 7/89deep (nominal) Calibre lateral filesand cabinets with S2 andLaminate overlay fronts. Please notethat Calibre bookcases are 159 deepnominal and will not accept aCalibre lateral file laminate tops.
Calibre desking surfaces are notdesigned to serve as lateral fileworksurface tops.
Application Notes
Designed for use with 18 7/89 deepnominal Calibre lateral files andcabinets with S2and Laminate overlay fronts.
Actual dimensions are listed ininches.
Note: The 189 deep tops on thispage may also be used with doublewide pedestals when a nominal 189deep top is required in panelplanning.
Critical Dimensions
NominalDimension
Actual Dimension
30x18 30.00 x 18.87530x36 30.00 x 37.75036x18 36.00 x 18.87536x36 36.00 x 37.75042x18 42.00 x 18.87542x36 42.00 x 37.75060x18 60.00 x 18.87560x36 60.00 x 37.75072x18 72.00 x 18.87572x36 72.00 x 37.75084x18 84.00 x 18.87584x36 84.00 x 37.75090x18 90.00 x 18.87590x36 90.00 x 37.750108x18 108.00 x 18.875108x36 108.00 x 37.750
Calibre
51
Cal
ibre
File
Col
lect
ion
Lateral File Worksurface TopsS2 and Laminate Front Calibre Lateral File Worksurface TopsPostform / Calibre Style
description d w h pattern no. list price
Postform / Calibre Style Rectangular189d Laminate File Tops for S2 andLaminate Front Calibre Files
189 1089 1 1/49 SC10818 $529.
189 309 1 1/49 SC3018 204.
189 369 1 1/49 SC3618 233.
189 429 1 1/49 SC4218 251.
189 609 1 1/49 SC6018 319.
189 729 1 1/49 SC7218 366.
189 849 1 1/49 SC8418 410.
189 909 1 1/49 SC9018 418.
Postform / Calibre Style Rectangular369d Laminate File Tops for S2 andLaminate Front Calibre Files
369 1089 1 1/49 SC10836 789.
369 309 1 1/49 SC3036 242.
369 369 1 1/49 SC3636 286.
369 429 1 1/49 SC4236 305.
369 609 1 1/49 SC6036 487.
369 729 1 1/49 SC7236 546.
369 849 1 1/49 SC8436 610.
369 909 1 1/49 SC9036 637.
Order Code
30X18 Morrison/Calibre Style FileTops (S2 Front Files)
Example: SC3018
SC Morrison/Calibre Edge
30 309 Wide
18 18 7/89 Deep
Specification Information
SC prefixed lateral file tops aredesigned to be attached to 18 7/89deep (nominal) Calibre lateral filesand cabinets with S2 and Laminateoverlay fronts. Please note thatCalibre bookcases are 159 deepnominal and will not accept aCalibre lateral file laminate tops.
Calibre desking surfaces are notdesigned to serve as lateral fileworksurface tops.
Application Notes
Designed for use with 18 7/89 deepnominal Calibre lateral files andcabinets with S2 overlay fronts.
Actual dimensions are listed ininches.
Note: The 189 deep tops on thispage may also be used with doublewide pedestals when a nominal 189deep top is required in panelplanning.
Critical Dimensions
NominalDimension
Actual Dimension
30x18 30.00 x 19.25030x36 30.00 x 38.50036x18 36.00 x 19.25036x36 36.00 x 38.50042x18 42.00 x 19.25042x36 42.00 x 38.50060x18 60.00 x 19.25060x36 60.00 x 38.50072x18 72.00 x 19.25072x36 72.00 x 38.50084x18 84.00 x 19.25084x36 84.00 x 38.50090x18 90.00 x 19.25090x36 90.00 x 38.500108x18 108.00 x 19.250108x36 108.00 x 38.500
Calibre
52
Lateral File Worksurface TopsS2 and Laminate Front Calibre Lateral File Worksurface TopsAutoStrada Style
description d w h pattern no. list price
Autostrada Style Rectangular189d Laminate File Tops for S2and Lateral Front Calibre Files
189 1089 1 1/49 SA10818 $1,052.
189 309 1 1/49 SA3018 303.
189 369 1 1/49 SA3618 334.
189 429 1 1/49 SA4218 356.
189 609 1 1/49 SA6018 639.
189 729 1 1/49 SA7218 765.
189 849 1 1/49 SA8418 835.
189 909 1 1/49 SA9018 966.
Autostrada Style Rectangular369d Laminate File Tops for S2and Laminate Front Calibre Files
369 1089 1 1/49 SA10836 1,384.
369 309 1 1/49 SA3036 549.
369 369 1 1/49 SA3636 605.
369 429 1 1/49 SA4236 654.
369 609 1 1/49 SA6036 897.
369 729 1 1/49 SA7236 995.
369 849 1 1/49 SA8436 1,069.
369 909 1 1/49 SA9036 1,088.
Order Code
30X18 AutoStrada Style FileTops (S2 Front Files)
Example: SA3018
SA AutoStrada Edge
30 309 Wide
18 18 7/89 Deep
Specification Information
SA prefixed lateral file tops aredesigned to be attached to 18 7/89deep (nominal) Calibre lateral filesand cabinets with S2 and Laminateoverlay fronts. Please note thatCalibre bookcases are 159 deepnominal and will not accept aCalibre lateral file laminate tops.
Calibre desking surfaces are notdesigned to serve as lateral fileworksurface tops.
Application Notes
Designed for use with 18 7/89 deepnominal Calibre lateral files andcabinets with S2 overlay fronts.
Actual dimensions are listed ininches
Critical Dimensions
NominalDimension
Actual Dimension
30x18 30.00 x 18.87530x36 30.00 x 37.75036x18 36.00 x 18.87536x36 36.00 x 37.75042x18 42.00 x 18.87542x36 42.00 x 37.75060x18 60.00 x 18.87560x36 60.00 x 37.75072x18 72.00 x 18.87572x36 72.00 x 37.75084x18 84.00 x 18.87584x36 84.00 x 37.75090x18 90.00 x 18.87590x36 90.00 x 37.750108x18 108.00 x 18.875108x36 108.00 x 37.750
Calibre
53
Cal
ibre
File
Col
lect
ion
Calibre Add-on Modules
description w d pattern no. P1 P2 P3
279 Add-on (Non-locking) Actual Height 28 3/89
shown with lock option
309 189 C2S2730E $915. $1,007. $1,055.
369 189 C2S2736E 969. 1,070. 1,122.
429 189 C2S2742E 1,015. 1,118. 1,173.
309 Add-on (Non-locking) Actual Height 31 3/89
shown with lock option
309 189 C2S3030E 969. 1,070. 1,122.
369 189 C2S3036E 1,029. 1,131. 1,189.
429 189 C2S3042E 1,073. 1,180. 1,237.
Order Code
13.5( Add-on Unit
Example: C2S1330E-115
C Calibre
2 Generation
S Add-on unit
13 139 High
30 309 Wide
E Knoll Lock
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).
Add-on module shelves are black.To match shelves to case color, add‘‘P’’ suffix to the pattern number and$51 to list price.
Application Notes
Units may be specified with locksonly as a ‘‘Built to Spec’’ option. Toadd a lock substitute the suffix ‘‘E’’with a ‘‘C’’ and add $36 to the list.
Units cannot be stacked inmultiples.
Units come with double cupboarddoors and one shelf for 279 and 309units. Add-on units are 189 deep.
Add-on units cannot be used inconjunction with Calibre LateralFiles with S2 Fronts.
Actual heights of add-on’s, 28 3/8(and 31 3/8(.
Calibre
54
Calibre BookcasesBookcases
descriptionnominalw
actualw d h pattern no. P1 P2 P3
deduct forno top
add forlaminate
top
add forV1top
Topless 2-high bookcase for use undera worksurface end, one steel shelf
23 1/29 14 7/89 27 1/49 C4B2723NS $763. $800. $842. $0. $0. $0.
29 1/29 14 7/89 27 1/49 C4B2729NS 789. 830. 868. 0. 0. 0.
2-high bookcase, steel top, one steel shelf 249 249 14 7/89 29 7/89 C4B3024(N/S/L/V)S 856. 899. 942. 146. 11. 267.
309 309 14 7/89 29 7/89 C4B3030(N/S/L/V)S 882. 927. 975. 150. 14. 319.
369 369 14 7/89 29 7/89 C4B3036(N/S/L/V)S 908. 951. 999. 155. 17. 378.
429 429 14 7/89 29 7/89 C4B3042(N/S/L/V)S 970. 1,014. 1,069. 160. 25. 451.
489 489 14 7/89 29 7/89 C4B3048(N/S/L/V)S 1,042. 1,093. 1,148. 165. 32. 538.
549 539 14 7/89 29 7/89 C4B3054(N/S/L/V)S 1,475. 1,551. 1,630. 169. 40. 568.
609 599 14 7/89 29 7/89 C4B3060(N/S/L/V)S 1,502. 1,576. 1,656. 173. 48. 619.
669 659 14 7/89 29 7/89 C4B3066(N/S/L/V)S 1,519. 1,597. 1,678. 178. 60. 679.
729 719 14 7/89 29 7/89 C4B3072(N/S/L/V)S 1,541. 1,619. 1,700. 184. 76. 739.
789 779 14 7/89 29 7/89 C4B3078(N/S/L/V)S 1,596. 1,675. 1,759. 189. 97. 811.
849 839 14 7/89 29 7/89 C4B3084(N/S/L/V)S 1,649. 1,730. 1,820. 195. 120. 883.
399 high bookcase, steel top, two steel shelves 249 249 14 7/89 399 C4B3924(N/S/L/V)S 1,006. 1,055. 1,110. 146. 11. 267.
309 309 14 7/89 399 C4B3930(N/S/L/V)S 1,042. 1,093. 1,148. 150. 14. 319.
369 369 14 7/89 399 C4B3936(N/S/L/V)S 1,076. 1,130. 1,187. 155. 17. 378.
429 429 14 7/89 399 C4B3942(N/S/L/V)S 1,145. 1,201. 1,260. 160. 25. 451.
489 489 14 7/89 399 C4B3948(N/S/L/V)S 1,234. 1,296. 1,360. 165. 32. 538.
549 539 14 7/89 399 C4B3954(N/S/L/V)S 1,740. 1,829. 1,918. 169. 40. 568.
609 599 14 7/89 399 C4B3960(N/S/L/V)S 1,770. 1,857. 1,952. 173. 48. 619.
669 659 14 7/89 399 C4B3966(N/S/L/V)S 1,799. 1,890. 1,983. 178. 60. 679.
729 719 14 7/89 399 C4B3972(N/S/L/V)S 1,831. 1,920. 2,016. 184. 76. 739.
789 779 14 7/89 399 C4B3978(N/S/L/V)S 1,889. 1,982. 2,079. 189. 97. 811.
849 839 14 7/89 399 C4B3984(N/S/L/V)S 1,945. 2,044. 2,144. 195. 120. 883.
Order Code
Example: C3B2723NS-118
C Calibre
4 Generation 4
B Bookcase
27 27 1/4 High Case
23 23 1/29 Wide Case
N No top
118 Bright white paint
Specification Information
Bookcase top options:
N No topS Steel topL Laminate topV Veneer top
P1, P2 and P3 pricing listed is forunits with steel tops and steelshelves as applicable. All deductsor up charges for top and shelfoptions are based on these prices.
Steel tops and shelves match thecase paint finish.
Bookcases specified with ‘‘no top’’option are designed to be usedwith laminate or veneer tops, andare not compatible with steel tops.Bookcases specified with ‘‘no top’’option are not intended to support apanel-mounted work surface.
Application Notes
Units 549 and wider utilize a midpanel that divides the unit into thefollowing non-handedconfigurations:
549= 249/309609= 309/309669= 309/369729= 369/369789= 369/429849= 429/429
3-, 4-, 5- and 6-high units with steeltops include a top trim panel toprovide a smooth appearance to theunderside of the top. It is notincluded with 2-high units.
Note: 6-high units must beganged back-to-back with theincluded hardware or against awall with user supplied hardware.
All units are shipped knockeddown.
The base, which also functions asthe bottom shelf, is only available insteel.
Standard shelf openings are 12.69hwith the exception of:279h = (2) 11.99 openings399h = (2) 12.69 openings and (1) 89opening649h = (3) 12.69 openings and (1)18.99 opening
Shelves are adjustable on 1.059increments the entire height of thecase and include anapproximately 3/49 gap in the back ofthe shelf for future enhancements.Optional shelf filler strip availableon page 59.
Laminate tops are 1.059 thick with2mm edge banding on all fouredges.
Calibre
55
Cal
ibre
File
Col
lect
ion
Calibre BookcasesBookcases
descriptionnominalw
actualw d h pattern no. P1 P2 P3
deduct forno top
add forlaminate
top
add forV1top
3-high bookcase, steel top, two steel shelves 249 249 14 7/89 43 1/29 C4B4424(N/S/L/V)S $1,006. $1,055. $1,110. $146. $11. $267.
309 309 14 7/89 43 1/29 C4B4430(N/S/L/V)S 1,042. 1,093. 1,148. 150. 14. 319.
369 369 14 7/89 43 1/29 C4B4436(N/S/L/V)S 1,076. 1,130. 1,187. 155. 17. 378.
429 429 14 7/89 43 1/29 C4B4442(N/S/L/V)S 1,145. 1,201. 1,260. 160. 25. 451.
489 489 14 7/89 43 1/29 C4B4448(N/S/L/V)S 1,234. 1,296. 1,360. 165. 32. 538.
549 539 14 7/89 43 1/29 C4B4454(N/S/L/V)S 1,740. 1,829. 1,918. 169. 40. 568.
609 599 14 7/89 43 1/29 C4B4460(N/S/L/V)S 1,770. 1,857. 1,952. 173. 48. 619.
669 659 14 7/89 43 1/29 C4B4466(N/S/L/V)S 1,799. 1,890. 1,983. 178. 60. 679.
729 719 14 7/89 43 1/29 C4B4472(N/S/L/V)S 1,831. 1,920. 2,016. 184. 76. 739.
789 779 14 7/89 43 1/29 C4B4478(N/S/L/V)S 1,889. 1,982. 2,079. 189. 97. 811.
849 839 14 7/89 43 1/29 C4B4484(N/S/L/V)S 1,945. 2,044. 2,144. 195. 120. 883.
4-high bookcase, steel top,three steel shelves
249 249 14 7/89 57 1/89 C4B5824(N/S/L/V)S 1,125. 1,181. 1,237. 146. 11. 267.
309 309 14 7/89 57 1/89 C4B5830(N/S/L/V)S 1,169. 1,226. 1,287. 150. 14. 319.
369 369 14 7/89 57 1/89 C4B5836(N/S/L/V)S 1,212. 1,274. 1,339. 155. 17. 378.
429 429 14 7/89 57 1/89 C4B5842(N/S/L/V)S 1,287. 1,352. 1,423. 160. 25. 451.
489 489 14 7/89 57 1/89 C4B5848(N/S/L/V)S 1,398. 1,468. 1,540. 165. 32. 538.
549 539 14 7/89 57 1/89 C4B5854(N/S/L/V)S 1,947. 2,046. 2,147. 169. 40. 568.
609 599 14 7/89 57 1/89 C4B5860(N/S/L/V)S 1,986. 2,082. 2,189. 173. 48. 619.
669 659 14 7/89 57 1/89 C4B5866(N/S/L/V)S 2,024. 2,124. 2,231. 178. 60. 679.
729 719 14 7/89 57 1/89 C4B5872(N/S/L/V)S 2,062. 2,167. 2,273. 184. 76. 739.
789 779 14 7/89 57 1/89 C4B5878(N/S/L/V)S 2,124. 2,231. 2,342. 189. 97. 811.
849 839 14 7/89 57 1/89 C4B5884(N/S/L/V)S 2,190. 2,298. 2,417. 195. 120. 883.
649 high bookcase, steel top, three steel shelves 249 249 14 7/89 63 3/89 C4B6424(N/S/L/V)S 1,181. 1,237. 1,298. 146. 11. 267.
309 309 14 7/89 63 3/89 C4B6430(N/S/L/V)S 1,226. 1,287. 1,352. 150. 14. 319.
369 369 14 7/89 63 3/89 C4B6436(N/S/L/V)S 1,274. 1,339. 1,402. 155. 17. 378.
429 429 14 7/89 63 3/89 C4B6442(N/S/L/V)S 1,352. 1,423. 1,494. 160. 25. 451.
489 489 14 7/89 63 3/89 C4B6448(N/S/L/V)S 1,468. 1,540. 1,618. 165. 32. 538.
549 539 14 7/89 63 3/89 C4B6454(N/S/L/V)S 2,046. 2,147. 2,256. 169. 40. 568.
609 599 14 7/89 63 3/89 C4B6460(N/S/L/V)S 2,082. 2,189. 2,297. 173. 48. 619.
669 659 14 7/89 63 3/89 C4B6466(N/S/L/V)S 2,124. 2,231. 2,342. 178. 60. 679.
729 719 14 7/89 63 3/89 C4B6472(N/S/L/V)S 2,167. 2,273. 2,388. 184. 76. 739.
789 779 14 7/89 63 3/89 C4B6478(N/S/L/V)S 2,231. 2,342. 2,460. 189. 97. 811.
Order Code
Example: C3B2723NS-118
C Calibre
4 Generation 4
B Bookcase
27 27 1/4 High Case
23 23 1/29 Wide Case
N No top
118 Bright white paint
Specification Information
Bookcase top options:
N No topS Steel topL Laminate topV Veneer top
P1, P2 and P3 pricing listed is forunits with steel tops and steelshelves as applicable. All deductsor up charges for top and shelfoptions are based on these prices.
Steel tops and shelves match thecase paint finish.
Bookcases specified with ‘‘no top’’option are designed to be usedwith laminate or veneer tops, andare not compatible with steel tops.Bookcases specified with ‘‘no top’’option are not intended to support apanel-mounted work surface.
Application Notes
Units 549 and wider utilize a midpanel that divides the unit into thefollowing non-handedconfigurations:
549= 249/309609= 309/309669= 309/369729= 369/369789= 369/429849= 429/429
3-, 4-, 5- and 6-high units with steeltops include a top trim panel toprovide a smooth appearance to theunderside of the top. It is notincluded with 2-high units.
Note: 6-high units must beganged back-to-back with theincluded hardware or against awall with user supplied hardware.
All units are shipped knockeddown.
The base, which also functions asthe bottom shelf, is only available insteel.
Standard shelf openings are 12.69hwith the exception of:279h = (2) 11.99 openings399h = (2) 12.69 openings and (1) 89opening649h = (3) 12.69 openings and (1)18.99 opening
Shelves are adjustable on 1.059increments the entire height of thecase and include anapproximately 3/49 gap in the back ofthe shelf for future enhancements.Optional shelf filler strip availableon page 59.
Laminate tops are 1.059 thick with2mm edge banding on all fouredges.
Calibre
56
descriptionnominalw
actualw d h pattern no. P1 P2 P3
deduct forno top
add forlaminate
top
add forV1top
649 high bookcase, steel top, three steelshelves
849 839 14 7/89 63 3/89 C4B6484(N/S/L/V)S $2,298. $2,417. $2,536. $195. $120. $883.00
Calibre BookcasesBookcases
Calibre
57
Cal
ibre
File
Col
lect
ion
Calibre BookcasesBookcases
descriptionnominalw
actualw d h pattern no. P1 P2 P3
deduct forno top
add forlaminate
top
add forV1top
5-high bookcase, steel top,four steel shelves
249 249 14 7/89 70 3/49 C4B7124(N/S/L/V)S $1,269. $1,335. $1,399. $146. $11. $267.
309 309 14 7/89 70 3/49 C4B7130(N/S/L/V)S 1,327. 1,395. 1,464. 150. 14. 319.
369 369 14 7/89 70 3/49 C4B7136(N/S/L/V)S 1,374. 1,444. 1,516. 155. 17. 378.
429 429 14 7/89 70 3/49 C4B7142(N/S/L/V)S 1,497. 1,572. 1,649. 160. 25. 451.
489 489 14 7/89 70 3/49 C4B7148(N/S/L/V)S 1,624. 1,704. 1,792. 165. 32. 538.
549 539 14 7/89 70 3/49 C4B7154(N/S/L/V)S 2,207. 2,321. 2,435. 169. 40. 568.
609 599 14 7/89 70 3/49 C4B7160(N/S/L/V)S 2,259. 2,372. 2,490. 173. 48. 619.
669 659 14 7/89 70 3/49 C4B7166(N/S/L/V)S 2,296. 2,411. 2,534. 178. 60. 679.
729 719 14 7/89 70 3/49 C4B7172(N/S/L/V)S 2,338. 2,454. 2,580. 184. 76. 739.
789 779 14 7/89 70 3/49 C4B7178(N/S/L/V)S 2,440. 2,563. 2,691. 189. 97. 811.
849 839 14 7/89 70 3/49 C4B7184(N/S/L/V)S 2,542. 2,669. 2,802. 195. 120. 883.
6-high bookcase, steel top, five steel shelves(must be ganged back-to-back or to a wall withincluded hardware)
249 249 14 7/89 84 1/29 C4B8524(N/S/L/V)S 1,506. 1,582. 1,660. 146. 11. 267.
309 309 14 7/89 84 1/29 C4B8530(N/S/L/V)S 1,578. 1,657. 1,738. 150. 14. 319.
369 369 14 7/89 84 1/29 C4B8536(N/S/L/V)S 1,647. 1,729. 1,818. 155. 17. 378.
429 429 14 7/89 84 1/29 C4B8542(N/S/L/V)S 1,808. 1,899. 1,993. 160. 25. 451.
489 489 14 7/89 84 1/29 C4B8548(N/S/L/V)S 1,874. 1,969. 2,065. 165. 32. 538.
549 539 14 7/89 84 1/29 C4B8554(N/S/L/V)S 2,622. 2,752. 2,891. 169. 40. 568.
609 599 14 7/89 84 1/29 C4B8560(N/S/L/V)S 2,681. 2,817. 2,958. 173. 48. 619.
669 659 14 7/89 84 1/29 C4B8566(N/S/L/V)S 2,742. 2,880. 3,025. 178. 60. 679.
729 719 14 7/89 84 1/29 C4B8572(N/S/L/V)S 2,801. 2,940. 3,090. 184. 76. 739.
789 779 14 7/89 84 1/29 C4B8578(N/S/L/V)S 2,937. 3,088. 3,240. 189. 97. 811.
849 839 14 7/89 84 1/29 C4B8584(N/S/L/V)S 3,073. 3,230. 3,388. 195. 120. 883.
Order Code
Example: C3B2723NS-118
C Calibre
4 Generation 4
B Bookcase
27 27 1/4 High Case
23 23 1/29 Wide Case
N No top
118 Bright white paint
Specification Information
Bookcase top options:
N No topS Steel topL Laminate topV Veneer top
P1, P2 and P3 pricing listed is forunits with steel tops and steelshelves as applicable. All deductsor up charges for top and shelfoptions are based on these prices.
Steel tops and shelves match thecase paint finish.
Bookcases specified with ‘‘no top’’option are designed to be usedwith laminate or veneer tops, andare not compatible with steel tops.Bookcases specified with ‘‘no top’’option are not intended to support apanel-mounted work surface.
Application Notes
Units 549 and wider utilize a midpanel that divides the unit into thefollowing non-handedconfigurations:
549= 249/309609= 309/309669= 309/369729= 369/369789= 369/429849= 429/429
3-, 4-, 5- and 6-high units with steeltops include a top trim panel toprovide a smooth appearance to theunderside of the top. It is notincluded with 2-high units.
Note: 6-high units must beganged back-to-back with theincluded hardware or against awall with user supplied hardware.
All units are shipped knockeddown.
The base, which also functions asthe bottom shelf, is only available insteel.
Standard shelf openings are 12.69hwith the exception of:279h = (2) 11.99 openings399h = (2) 12.69 openings and (1) 89opening649h = (3) 12.69 openings and (1)18.99 opening
Shelves are adjustable on 1.059increments the entire height of thecase and include anapproximately 3/49 gap in the back ofthe shelf for future enhancements.Optional shelf filler strip availableon page 59.
Laminate tops are 1.059 thick with2mm edge banding on all fouredges.
Calibre
58
Calibre BookcasesBookcase Accessories
description w d h pattern no. P1 P2 P3 lam. V1 list
Steel bookcase shelf with brackets 249 139 1 1/649 C4BSH24S $77. $84. $86. n/a n/a
309 139 1 1/649 C4BSH30S 85. 88. 92. n/a n/a
369 139 1 1/649 C4BSH36S 89. 96. 100. n/a n/a
429 139 1 1/649 C4BSH42S 97. 101. 107. n/a n/a
489 139 1 1/649 C4BSH48S 102. 107. 114. n/a n/a
Steel bookcase shelf with brackets(package of 5)
249 139 1 1/649 C4BSH24S5 356. 375. 392. n/a n/a
309 139 1 1/649 C4BSH30S5 384. 402. 424. n/a n/a
369 139 1 1/649 C4BSH36S5 410. 434. 452. n/a n/a
429 139 1 1/649 C4BSH42S5 438. 458. 484. n/a n/a
489 139 1 1/649 C4BSH48S5 464. 488. 510. n/a n/a
309d bookcase top 249 29 13/169 1 1/89 C4BTOP24(L/V) n/a n/a n/a 229. 477.
309 29 13/169 1 1/89 C4BTOP30(L/V) n/a n/a n/a 251. 537.
369 29 13/169 1 1/89 C4BTOP36(L/V) n/a n/a n/a 296. 313.
429 29 13/169 1 1/89 C4BTOP42(L/V) n/a n/a n/a 316. 333.
489 29 13/169 1 1/89 C4BTOP48(L/V) n/a n/a n/a 341. 359.
549 29 13/169 1 1/89 C4BTOP54(L/V) n/a n/a n/a 479. 503.
609 29 13/169 1 1/89 C4BTOP60(L/V) n/a n/a n/a 506. 533.
669 29 13/169 1 1/89 C4BTOP66(L/V) n/a n/a n/a 536. 561.
729 29 13/169 1 1/89 C4BTOP72(L/V) n/a n/a n/a 566. 597.
789 29 13/169 1 1/89 C4BTOP78(L/V) n/a n/a n/a 602. 634.
849 29 13/169 1 1/89 C4BTOP84(L/V) n/a n/a n/a 636. 665.
Shelf Filler Strip(package of 5)
249 3/49 1 1/649 C4BSHFS24 175. 197. 205. n/a n/a
309 3/49 1 1/649 C4BSHFS30 185. 203. 211. n/a n/a
369 3/49 1 1/649 C4BSHFS36 211. 229. 240. n/a n/a
429 3/49 1 1/649 C4BSHFS42 214. 235. 246. n/a n/a
489 3/49 1 1/649 C4BSHFS48 216. 239. 251. n/a n/a
Glide Adjustment Wrench C4BWRENCH 13.
Order Code
Example: C3BSH42S5-118
C Calibre
4 Generation 4
B Bookcase
SH Shelf
42 429 wide
S Steel
5 Package of 5
118 Bright white paint
Specification Information
Package of 5 shelves must beordered in a single color perpackage.
Bookcase shelves are only availablein steel.
Bookcase top options:
L Laminate topV Veneer top
Application Notes
Units 549 and wider utilize a midpanel that divides the unit into thefollowing non-handedconfigurations:
549= 249/309609= 309/309669= 309/369729= 369/369789= 369/429849= 429/429
Glide Adjustment WrenchThis tool is a long, thin wrenchdesigned to aid in the adjustment ofthe rear glides when they are noteasily accessible.
309d Bookcase TopThese laminate or veneer tops maybe utilized with bookcases orderedwith the ‘‘no top’’ option.NOTE: These tops will only workwith either a ‘‘no top’’ bookcase orthose originally ordered with alaminate or veneer top of thesame size.
Tops are for single bookcasesonly and are not sized to fit on twobookcases pushed together sideby side (ex. 60(w top will not covertwo 30(w cases).
Ganging KitProvides necessary attachmentbolts/brackets to attach two unitstogether (side to side or back toback) as wall as attach a single unitback against a wall.
Shelves are adjustable on 1.059increments the entire height of thecase.
Laminate tops are 1.059 thick with2mm edge banding on all fouredges.
Calibre
59
Cal
ibre
File
Col
lect
ion
Planning Built-to-Spec Calibre Lateral Files
Planning Built-to-Spec Files
Calibre built-to-spec files allowthousands of drawer, shelf and doorconfigurations using a variety of 1.59,39, 69, 7.59, 10.59, 129, 13.59 and 159high components.
When compiling a product numberfor built-to-spec files, specifyindividual components from the topof the case to the bottom. A letterdesignation has been assigned toeach component.
The total height of components mustequal the interior height of the filecase. which is 39 less than the totalcase height provided. Example: A519 high case must containcomponents that equal 489 exactly.
Please note the following planningconsiderations when designing a‘‘Built-to-Spec’’ configuration:
1. Posting shelves and tie-bars arenot permitted directly belowcupboard doors.
2. Tie-bars and posting shelves arenot permitted within the toplocation or the bottom location ofa lateral file.
3. Calibre files are painted with amonochromatic color scheme. Ifcase and drawer fronts arerequired to be a different color onthe same case, this is considereda special and requires a customproduct request form from CustomProduct Development.
4. Receding doors with fixed andpullout shelves are not permitteddirectly below posting shelves oron any lateral file with hybrid unitdoors.
5. Cases are limited to either onetie-bar or one posting shelf percase.
6. Individual locking drawers arenot available as a 9Built-to-Spec9option.
7. Only 639 and 64.599Built-to-Spec9 Hybrids arepermitted.
8. S2 front Calibre lateral files arenot available as a 9Built-to-Spec9.
9. No more than four 69 or 39drawers may be placed within acase as standard product. Morethan four 69 or 39 drawers may bespecified only as special product.Pricing for these special files maybe more than a ‘‘built-to-spec’’standard file with the sameconfiguration.
Calibre
60
Built-to-Spec Worksheet
Date
Customer Name
Project Name
Dealer
Customer’s Purchase Order No.
1. For ease of use, make a photocopy of this worksheet.2. Make a small sketch of the file product you have in mind in the sketch area provided.3. Find the appropriate case description from the following pages. (Your selection will be based on height, width, base, and lock option.)
On your worksheet, record the case description, the four-digit code number, and the price.4. Next, write in the components you’ll use to fill your case. The component listing follows the case listing. Start at the top of your case
and list each component, its code number, and price. (Be sure your total component height does not exceed the height of the file.)5. Now transfer and total your figures to fill in the bottom row.
• Build your pattern number from the column of code numbers, keeping code numbers in consecutive order.• Add the prices of the case and components for your total price.• To help in your planning and ordering, enter the finish code (from the Calibre Finish card) and the total number of units you’ll need.
6. Follow steps 3-6 for each custom file you wish to order.
(sketch here) Description Order No. Price
Case 519h x 429w C2F5142CComponents
129 rollout shelf ZTwo 69 rollout dwrs. H99 rollout drawer F159 rollout drawer A
Pattern No. Total Price Finish Code No. of Units
C2F5142CZHHFA
(sketch here) Description Order No. Price
Case
Components
Pattern No. Total Price Finish Code No. of Units
Calibre
61
Cal
ibre
File
Col
lect
ion
Calibre Front Lateral Files- Built-to-SpecBuilt-to-Spec Calibre Cases
description w h lock pattern no. P1 P2 P3
279 High Case with Lock(249 opening)
309 279 Y C2F2730C $566. $623. $652.
369 279 Y C2F2736C 630. 690. 725.
429 279 Y C2F2742C 697. 767. 807.
34.59 High Case with Lock(31.59 opening)
309 34.59 Y C2F3430C 684. 752. 790.
369 34.59 Y C2F3436C 744. 820. 857.
429 34.59 Y C2F3442C 837. 917. 964.
399 High Case with Lock(369 opening)
309 399 Y C2F3930C 700. 770. 807.
369 399 Y C2F3936C 755. 834. 875.
429 399 Y C2F3942C 852. 941. 985.
459 High Case with Lock(429 opening)
309 459 Y C2F4530C 774. 849. 893.
369 459 Y C2F4536C 851. 940. 983.
429 459 Y C2F4542C 908. 998. 1,049.
519 High Case with Lock(489 opening)
309 519 Y C2F5130C 782. 857. 902.
369 519 Y C2F5136C 872. 960. 1,006.
429 519 Y C2F5142C 979. 1,075. 1,128.
549 High Case with Lock(519 opening)
309 549 Y C2F5430C 809. 891. 938.
369 549 Y C2F5436C 889. 979. 1,029.
429 549 Y C2F5442C 987. 1,092. 1,143.
Order Code
Example: C2F2730C-115
C Calibre
2 Generation
F File
27 Height
30 Width
C Knoll Lock
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customers own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14 )
For cases without locks substitutethe last ‘‘C’’ with an ‘‘E’’ and deduct$36 from the list price. Example,C2F2730E-Y2.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories, page 76).
Locks are keyed randomly, unlessotherwise specified (see Keys page137)
Lock cores, keys, change keys areordered separately (Refer to CalibreAccessories on page 76
Interior modules must equal theoverall case height less 3(.
Replace the ‘‘F’’ in the case patternnumber with an ‘‘H’’ if specifying acase for use with hybrid doors.
Calibre
62
Calibre Front Lateral Files- Built-to-SpecBuilt-to-Spec Calibre Cases
description w h lock pattern no. P1 P2 P3
55.59 High Case with Lock(52.59 opening)
309 55.59 Y C2F5530C $819. $900. $946.
369 55.59 Y C2F5536C 898. 985. 1,034.
429 55.59 Y C2F5542C 1,001. 1,101. 1,156.
58.59 High Case with Lock(55.59 opening)
309 58.59 Y C2F5830C 827. 910. 957.
369 58.59 Y C2F5836C 916. 1,008. 1,058.
429 58.59 Y C2F5842C 1,020. 1,119. 1,177.
639 High Case with Lock(609 opening)
309 639 Y C2F6330C 861. 949. 995.
369 639 Y C2F6336C 950. 1,046. 1,098.
429 639 Y C2F6342C 1,025. 1,127. 1,180.
639 High Case for HybridCabinet with Lock (609 opening)
309 639 Y C2H6330C 861. 949. 995.
369 639 Y C2H6336C 950. 1,046. 1,098.
64.59 High Case with Lock(61.59 opening)
309 64.59 Y C2F6430C 872. 960. 1,006.
369 64.59 Y C2F6436C 961. 1,057. 1,108.
429 64.59 Y C2F6442C 1,052. 1,161. 1,217.
64.59 High Case for HybridCabinet with Lock (61.59 opening)
309 64.59 Y C2H6430C 872. 960. 1,006.
369 64.59 Y C2H6436C 961. 1,057. 1,108.
Order Code
Example: C2F2730C-115
C Calibre
2 Generation
F File
27 Height
30 Width
C Knoll Lock
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Customers own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14 )
For cases without locks substitutethe last ‘‘C’’ with an ‘‘E’’ and deduct$36 from the list price. Example,C2F2730E-Y2.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories, page 76).
Locks are keyed randomly, unlessotherwise specified (see Keys page137)
Lock cores, keys, change keys areordered separately (Refer to CalibreAccessories on page 76
Interior modules must equal theoverall case height less 3(.
Replace the ‘‘F’’ in the case patternnumber with an ‘‘H’’ if specifying acase for use with hybrid doors.
Calibre
63
Cal
ibre
File
Col
lect
ion
Calibre Front Lateral Files- Built-to-SpecCalibre Built-to-Spec Interior Components
description width pattern no. P1 P2 P3
159 Rollout drawer with rails 309 A $422. $463. $491.
369 A 463. 509. 540.
429 A 485. 534. 558.
13.59 Rollout drawer with rails 309 B 397. 434. 459.
369 B 442. 490. 509.
429 B 479. 528. 554.
129 Rollout drawer with rails 309 C 247. 271. 286.
369 C 281. 311. 324.
429 C 294. 326. 341.
10.59 Rollout drawer with rails 309 D 247. 271. 286.
369 D 281. 311. 324.
429 D 294. 326. 341.
Special Planning Notes for ‘‘Builtto Spec’’ Files
1). Posting shelves and tie-bars arenot permitted directly belowcupboard doors.2). Tie-bars andposting shelves are not permittedwithin the upmost top location or thebottom location of a lateral filecase.3). Calibre files are paintedwith a monochromatic color scheme.If seeking case and drawer fronts tobe a different color on the samecase, this is considered a special.4).Receding doors with fixed andpullout shelves are not permitteddirectly below posting shelves or onany lateral file with hybrid unitdoors.5). Cases are limited to eitherone tie-bar or one posting shelf percase.6). Individual locking drawersare not available as a ‘‘Built toSpec’’ option.7). Only 639 and 64.59‘‘Built to Spec’’ Hybrids arepermitted.8). S2 front Calibre lateral files arenot available as a ‘‘Built-to-Spec9.9). No more than four 69 or 39drawers may be placed within a caseas standard product. More than four69 or 39 drawes may be specifiedonly as special product. Pricing forthese special files may be more thana ‘‘built-to-spec’’ standard file withthe same configurations.
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Custom non-metallic paint finishesavailable at P2 pricing. Thisexcludes metallic paints and whitepaints. (see color policy page 14).
Application Notes
All 10.59, 129, 13.59 and 159drawers accommodate side-to-sidefiling and front-to-back filing.
File bars can be used in 10.59, 129,13.59 and 159 drawers havingside-to-side rails.
No more than four 39 or 69 drawerscan be specified in any one-file caseas standard product.
Posting shelves are most effectivewhen positioned fromdesk-to-counter height or 279 to 399from the floor.
Posting shelves and tie bars cannotbe placed within the top 1.59 of afile. Tie bars cannot be placeddirectly below a posting shelf.
Interior modules must equal theoverall case height less 39.
Posting shelves are not availablebelow desk height.
Largest drawers are best positionednear the base of the file.
Accessories must be orderedseparately unless noted indescription.
Label holders are not included withfiles. Please see Accessories page76.
Calibre
64
Calibre Front Lateral Files- Built-to-SpecCalibre Built-to-Spec Interior Components
description width pattern no. P1 P2 P3
99 Rollout drawer 309 F $321. $354. $371.
369 F 353. 389. 408.
429 F 368. 406. 423.
7.59 Rollout drawer 309 G 321. 354. 371.
369 G 353. 389. 408.
429 G 368. 406. 423.
69 Rollout drawer 309 H 268. 294. 311.
369 H 298. 328. 344.
429 H 328. 364. 382.
39 Rollout drawer 309 I 246. 269. 282.
369 I 255. 280. 292.
429 I 261. 287. 303.
Special Planning Notes for ‘‘Builtto Spec’’ Files
1). Posting shelves and tie-bars arenot permitted directly belowcupboard doors.2). Tie-bars andposting shelves are not permittedwithin the upmost top location or thebottom location of a lateral filecase.3). Calibre files are paintedwith a monochromatic color scheme.If seeking case and drawer fronts tobe a different color on the samecase, this is considered a special.4).Receding doors with fixed andpullout shelves are not permitteddirectly below posting shelves or onany lateral file with hybrid unitdoors.5). Cases are limited to eitherone tie-bar or one posting shelf percase.6). Individual locking drawersare not available as a ‘‘Built toSpec’’ option.7). Only 639 and 64.59‘‘Built to Spec’’ Hybrids arepermitted.8). S2 front Calibre lateral files arenot available as a ‘‘Built-to-Spec9.9). No more than four 69 or 39drawers may be placed within a caseas standard product. More than four69 or 39 drawes may be specifiedonly as special product. Pricing forthese special files may be more thana ‘‘built-to-spec’’ standard file withthe same configurations.
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Custom non-metallic paint finishesavailable at P2 pricing. Thisexcludes metallic paints and whitepaints. (see color policy page 14).
Application Notes
All 10.59, 129, 13.59 and 159drawers accommodate side-to-sidefiling and front-to-back filing.
File bars can be used in 10.59, 129,13.59 and 159 drawers havingside-to-side rails.
No more than four 39 or 69 drawerscan be specified in any one-file caseas standard product.
Posting shelves are most effectivewhen positioned fromdesk-to-counter height or 279 to 399from the floor.
Posting shelves and tie bars cannotbe placed within the top 1.59 of afile. Tie bars cannot be placeddirectly below a posting shelf.
Interior modules must equal theoverall case height less 39.
Posting shelves are not availablebelow desk height.
Largest drawers are best positionednear the base of the file.
Accessories must be orderedseparately unless noted indescription.
Label holders are not included withfiles. Please see Accessories page76.
Calibre
65
Cal
ibre
File
Col
lect
ion
Calibre Front Lateral Files- Built-to-SpecCalibre Built-to-Spec Interior Components
description width pattern no. P1 P2 P3
1.59 Reference/Posting Shelf 309 J $313. $343. $359.
369 J 313. 343. 359.
429 J 313. 343. 359.
1.59 Filler/Tie Bar 309 K 107. 120. 124.
369 K 107. 120. 124.
429 K 107. 120. 124.
25.59 Hybrid unit doors with 1 adjustable shelf 309 S 596. 653. 687.
369 S 709. 778. 819.
249 Hybrid unit doors with 1 adjustable shelf 309 R 596. 653. 687.
369 R 709. 778. 819.
369 Hybrid unit doors with 2 adjustable shelves 309 T 642. 706. 736.
369 T 751. 824. 865.
Special Planning Notes for ‘‘Builtto Spec’’ Files
1). Posting shelves and tie-bars arenot permitted directly belowcupboard doors.2). Tie-bars andposting shelves are not permittedwithin the upmost top location or thebottom location of a lateral filecase.3). Calibre files are paintedwith a monochromatic color scheme.If seeking case and drawer fronts tobe a different color on the samecase, this is considered a special.4).Receding doors with fixed andpullout shelves are not permitteddirectly below posting shelves or onany lateral file with hybrid unitdoors.5). Cases are limited to eitherone tie-bar or one posting shelf percase.6). Individual locking drawersare not available as a ‘‘Built toSpec’’ option.7). Only 639 and 64.59‘‘Built to Spec’’ Hybrids arepermitted.8). S2 front Calibre lateral files arenot available as a ‘‘Built-to-Spec9.9). No more than four 69 or 39drawers may be placed within a caseas standard product. More than four69 or 39 drawes may be specifiedonly as special product. Pricing forthese special files may be more thana ‘‘built-to-spec’’ standard file withthe same configurations.
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Custom non-metallic paint finishesavailable at P2 pricing. Thisexcludes metallic paints and whitepaints. (see color policy page 14).
Application Notes
All 10.59, 129, 13.59 and 159drawers accommodate side-to-sidefiling and front-to-back filing.
File bars can be used in 10.59, 129,13.59 and 159 drawers havingside-to-side rails.
No more than four 39 or 69 drawerscan be specified in any one-file caseas standard product.
Posting shelves are most effectivewhen positioned fromdesk-to-counter height or 279 to 399from the floor.
Posting shelves and tie bars cannotbe placed within the top 1.59 of afile. Tie bars cannot be placeddirectly below a posting shelf.
Interior modules must equal theoverall case height less 39.
Posting shelves are not availablebelow desk height.
Largest drawers are best positionednear the base of the file.
Accessories must be orderedseparately unless noted indescription.
Label holders are not included withfiles. Please see Accessories page76.
Calibre
66
Calibre Front Lateral Files- Built-to-SpecCalibre Built-to-Spec Interior Components
description width pattern no. P1 P2 P3
37.59 Hybrid unit doors with 2 adjustable shelves 309 U $642. $706. $736.
369 U 751. 824. 865.
159 Receding Door with Fixed Base and Dividers 309 L 377. 416. 435.
369 L 393. 428. 455.
429 L 411. 454. 471.
13.59 Receding Door with Fixed Base andDividers
309 M 377. 416. 435.
369 M 393. 428. 455.
429 M 411. 454. 471.
129 Receding Door with Fixed Base and Dividers 309 N 297. 327. 343.
369 N 328. 364. 382.
429 N 368. 406. 428.
Special Planning Notes for ‘‘Builtto Spec’’ Files
1). Posting shelves and tie-bars arenot permitted directly belowcupboard doors.2). Tie-bars andposting shelves are not permittedwithin the upmost top location or thebottom location of a lateral filecase.3). Calibre files are paintedwith a monochromatic color scheme.If seeking case and drawer fronts tobe a different color on the samecase, this is considered a special.4).Receding doors with fixed andpullout shelves are not permitteddirectly below posting shelves or onany lateral file with hybrid unitdoors.5). Cases are limited to eitherone tie-bar or one posting shelf percase.6). Individual locking drawersare not available as a ‘‘Built toSpec’’ option.7). Only 639 and 64.59‘‘Built to Spec’’ Hybrids arepermitted.8). S2 front Calibre lateral files arenot available as a ‘‘Built-to-Spec9.9). No more than four 69 or 39drawers may be placed within a caseas standard product. More than four69 or 39 drawes may be specifiedonly as special product. Pricing forthese special files may be more thana ‘‘built-to-spec’’ standard file withthe same configurations.
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Custom non-metallic paint finishesavailable at P2 pricing. Thisexcludes metallic paints and whitepaints. (see color policy page 14).
Application Notes
All 10.59, 129, 13.59 and 159drawers accommodate side-to-sidefiling and front-to-back filing.
File bars can be used in 10.59, 129,13.59 and 159 drawers havingside-to-side rails.
No more than four 39 or 69 drawerscan be specified in any one-file caseas standard product.
Posting shelves are most effectivewhen positioned fromdesk-to-counter height or 279 to 399from the floor.
Posting shelves and tie bars cannotbe placed within the top 1.59 of afile. Tie bars cannot be placeddirectly below a posting shelf.
Interior modules must equal theoverall case height less 39.
Posting shelves are not availablebelow desk height.
Largest drawers are best positionednear the base of the file.
Accessories must be orderedseparately unless noted indescription.
Label holders are not included withfiles. Please see Accessories page76.
Calibre
67
Cal
ibre
File
Col
lect
ion
Calibre Front Lateral Files- Built-to-SpecCalibre Built-to-Spec Interior Components
description width pattern no. P1 P2 P3
159 Receding Door with Pullout Shelf andHanging Rails
309 O $482. $533. $557.
369 O 526. 579. 604.
429 O 545. 600. 635.
13.59 Receding Door with Pullout Shelf andHanging Rails
309 P 473. 525. 546.
369 P 515. 566. 596.
429 P 540. 593. 621.
129 Receding Door with Pullout Shelf andHanging Rails
309 Z 369. 408. 424.
369 Z 387. 423. 447.
429 Z 424. 466. 496.
Special Planning Notes for ‘‘Builtto Spec’’ Files
1). Posting shelves and tie-bars arenot permitted directly belowcupboard doors.2). Tie-bars andposting shelves are not permittedwithin the upmost top location or thebottom location of a lateral filecase.3). Calibre files are paintedwith a monochromatic color scheme.If seeking case and drawer fronts tobe a different color on the samecase, this is considered a special.4).Receding doors with fixed andpullout shelves are not permitteddirectly below posting shelves or onany lateral file with hybrid unitdoors.5). Cases are limited to eitherone tie-bar or one posting shelf percase.6). Individual locking drawersare not available as a ‘‘Built toSpec’’ option.7). Only 639 and 64.59‘‘Built to Spec’’ Hybrids arepermitted.8). S2 front Calibre lateral files arenot available as a ‘‘Built-to-Spec9.9). No more than four 69 or 39drawers may be placed within a caseas standard product. More than four69 or 39 drawes may be specifiedonly as special product. Pricing forthese special files may be more thana ‘‘built-to-spec’’ standard file withthe same configurations.
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Custom non-metallic paint finishesavailable at P2 pricing. Thisexcludes metallic paints and whitepaints. (see color policy page 14).
Application Notes
All 10.59, 129, 13.59 and 159drawers accommodate side-to-sidefiling and front-to-back filing.
File bars can be used in 10.59, 129,13.59 and 159 drawers havingside-to-side rails.
No more than four 39 or 69 drawerscan be specified in any one-file caseas standard product.
Posting shelves are most effectivewhen positioned fromdesk-to-counter height or 279 to 399from the floor.
Posting shelves and tie bars cannotbe placed within the top 1.59 of afile. Tie bars cannot be placeddirectly below a posting shelf.
Interior modules must equal theoverall case height less 39.
Posting shelves are not availablebelow desk height.
Largest drawers are best positionednear the base of the file.
Accessories must be orderedseparately unless noted indescription.
Label holders are not included withfiles. Please see Accessories page76.
Calibre
68
Calibre Front Lateral Files with Individual Locking Drawers279 High Calibre Front Individual Locking Files
description w hsecurityseparators pattern no. P1 P2 P3
279 high lateral file, 2-129 drawers with hangingrails
309 279 C2F2730WCC $1,147. $1,247. $1,308.
309 279 Y C2F2730XCC 1,180. 1,286. 1,352.
369 279 C2F2736WCC 1,269. 1,387. 1,454.
369 279 Y C2F2736XCC 1,305. 1,425. 1,492.
429 279 C2F2742WCC 1,370. 1,497. 1,572.
429 279 Y C2F2742XCC 1,405. 1,530. 1,612.
Order Code
Example: C2F2730WCCC-115
C Calibre
2 Generation
27 279 High
30 309 Wide
W Individual Locking
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Custom non-metallic paint finishesavailable at P2 pricing. Thisexcludes metallic paints and whitepaints. (see color policy page 14)
For individual locking with securityseparators replace the ‘‘W’’ with an‘‘X’’
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories, page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP paperssizes.
All locks must be orderedseparately for individually lockingfiles.
See KnollKeylock program on page137 for keying information.
Critical Dimensions
Actual Outside Case Height 26 27/329
Actual Inside Case Height 249
Calibre files are 189 deep.
Drawer configurations read from topto bottom of case. Interiors notedwith rails consist of front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76 .
Calibre
69
Cal
ibre
File
Col
lect
ion
Calibre Front Lateral Files with Individual Locking Drawers399 High Calibre Front Individual Locking Files
description w hsecurityseparator pattern no. P1 P2 P3
399 high lateral file, 3-129 drawers with hangingrails
309 399 C2F3930WCCC $1,596. $1,737. $1,824.
309 399 Y C2F3930XCCC 1,651. 1,792. 1,880.
369 399 C2F3936WCCC 1,752. 1,910. 2,003.
369 399 Y C2F3936XCCC 1,808. 1,964. 2,062.
429 399 C2F3942WCCC 1,893. 2,069. 2,171.
429 399 Y C2F3942XCCC 1,947. 2,124. 2,231.
Order Code
Example: C2F3930WCCC-115
C Calibre
2 Generation
39 399 High
30 309 Wide
W Individual Locking
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Custom non-metallic paint finishesavailable at P2 pricing. Thisexcludes metallic paints and whitepaints. (see color policy page 14)
For individual locking with securityseparators replace the ‘‘W’’ with an‘‘X’’
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories, page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP paperssizes.
All locks must be orderedseparately for individually lockingfiles.
See KnollKeylock program on page137 for keying information.
Critical Dimensions
Actual Outside Case Height 38 27/329
Actual Inside Case Height 369
Calibre files are 189 deep.
Drawer configurations read from topto bottom of case. Interiors notedwith rails consist of front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76 .
Calibre
70
Calibre Front Lateral Files with Individual Locking Drawers519 High Calibre Front Individual Locking Files
description w hsecurityseparator pattern no. P1 P2 P3
519 high lateral file, 4-129 drawers with hangingrails
309 519 C2F5130WCCCC $2,065. $2,244. $2,360.
309 519 Y C2F5130XCCCC 2,136. 2,321. 2,436.
369 519 C2F5136WCCCC 2,281. 2,492. 2,618.
369 519 Y C2F5136XCCCC 2,360. 2,564. 2,694.
429 519 C2F5142WCCCC 2,515. 2,748. 2,884.
429 519 Y C2F5142XCCCC 2,588. 2,819. 2,958.
Order Code
Example: C2F5130WCCC-115
C Calibre
2 Generation
51 279 High
30 309 Wide
W Individual Locking
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Custom non-metallic paint finishesavailable at P2 pricing. Thisexcludes metallic paints and whitepaints. (see color policy page 14)
For individual locking with securityseparators replace the ‘‘W’’ with an‘‘X’’
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories, page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP paperssizes.
All locks must be orderedseparately for individually lockingfiles.
See KnollKeylock program on page137 for keying information.
Critical Dimensions
Actual Outside Case Height 50 27/329
Actual Inside Case Height 489
Calibre files are 189 deep.
Drawer configurations read from topto bottom of case. Interiors notedwith rails consist of front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76 .
Calibre
71
Cal
ibre
File
Col
lect
ion
Calibre Front Lateral Files with Individual Locking Drawers639 High Calibre Front Individual Locking Files
description w hsecurityseparator pattern no. P1 P2 P3
639 high lateral file, 1-129 receding door withpullout shelf, 4-129 drawers with hanging rails
309 639 C2F6330WZCCCC $2,492. $2,705. $2,842.
309 639 Y C2F6330XZCCCC 2,582. 2,797. 2,936.
369 639 C2F6336WZCCCC 2,739. 2,984. 3,130.
369 639 Y C2F6336XZCCCC 2,833. 3,075. 3,229.
429 639 C2F6342WZCCCC 3,028. 3,302. 3,467.
429 639 Y C2F6342XZCCCC 3,117. 3,390. 3,558.
639 high hybrid unit with 249 storage doors and3-129 drawers with rails
309 639 C2H6330WRCCC 2,565. 2,801. 2,941.
309 639 Y C2H6330XRCCC 2,625. 2,857. 3,005.
369 639 C2H6336WRCCC 2,878. 3,145. 3,299.
369 639 Y C2H6336XRCCC 2,942. 3,201. 3,363.
639 high hybrid unit with 369 storage doors and2-129 drawers with hanging rails
309 639 C2H6330WTCC 2,266. 2,474. 2,599.
309 639 Y C2H6330XTCC 2,306. 2,513. 2,638.
369 639 C2H6336WTCC 2,543. 2,778. 2,917.
369 639 Y C2H6336XTCC 2,583. 2,819. 2,960.
Order Code
Example: C2F6330WZCCCC-115
C Calibre
2 Generation
63 639 High
30 309 Wide
W Individual Locking
Z 129 Receding Door withPull Out Shelf
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Custom non-metallic paint finishesavailable at P2 pricing. Thisexcludes metallic paints and whitepaints. (see color policy page 14)
For individual locking with securityseparators replace the ‘‘W’’ with an‘‘X’’
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories, page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP paperssizes.
All locks must be orderedseparately for individually lockingfiles.
See KnollKeylock program on page137 for keying information.
Critical Dimensions
Actual Outside Case Height 62 27/329
Actual Inside Case Height 609
Calibre files are 189 deep
Drawer configurations read from topto bottom of case. Interiors notedwith rails consist of front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76 .
Calibre
72
Calibre Front Lateral Files with Individual Locking Drawers64.59 High Calibre Front Individual Locking Files
description w hsecurityseparators pattern no. P1 P2 P3
64.59 high hybrid unit with 25.59 storage doorsand 3-129 drawers with hanging rails
309 64.59 C2H6430WSCCC $2,514. $2,734. $2,868.
309 64.59 Y C2H6430XSCCC 2,568. 2,787. 2,926.
369 64.59 C2H6436WSCCC 2,816. 3,065. 3,216.
369 64.59 Y C2H6436XSCCC 2,870. 3,121. 3,274.
64.59 high hybrid unit with 37.59 storage doorsand 2-129 drawers with hanging rails
309 64.59 C2H6430WUCC 2,223. 2,426. 2,543.
309 64.59 Y C2H6430XUCC 2,263. 2,463. 2,582.
369 64.59 C2H6436WUCC 2,492. 2,714. 2,849.
369 64.59 Y C2H6436XUCC 2,527. 2,756. 2,892.
Order Code
Example: C2F6330WZCCCC-115
C Calibre
2 Generation
63 639 High
30 309 Wide
W Individual Locking
S 25.59 Storage Doors
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Custom non-metallic paint finishesavailable at P2 pricing. Thisexcludes metallic paints and whitepaints. (see color policy page 14)
For individual locking with securityseparators replace the ‘‘W’’ with an‘‘X’’
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories, page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP paperssizes.
All locks must be orderedseparately for individually lockingfiles.
See KnollKeylock program on page137 for keying information.
Critical Dimensions
Actual Outside Case Height 64 27/329
Actual Inside Case Height 61 1/29
Calibre files are 189 deep.
Drawer configurations read from topto bottom of case. Interiors notedwith rails consist of front to backand side to side hanging rails. Referto front planning pages foradditional information.
Label holders are not included withfiles. Please see Accessories page76 .
Calibre
73
Cal
ibre
File
Col
lect
ion
Laminate Front Lateral Files2 high, 3 high and 4 high
description w h locks pattern no. L1 L2
279 case with 2-129 drawers with hanging rails 309 279 C2FL2730ECC $1,355. $1,458.
309 279 Y C2FL2730CCC 1,371. 1,473.
369 279 C2FL2736ECC 1,412. 1,535.
369 279 Y C2FL2736CCC 1,428. 1,551.
429 279 C2FL2742ECC 1,485. 1,624.
429 279 Y C2FL2742CCC 1,500. 1,639.
399 case with 3-129 drawers with hanging rails 309 399 C2FL3930ECCC 1,894. 2,027.
309 399 Y C2FL3930CCCC 1,851. 2,042.
369 399 C2FL3936ECCC 1,916. 2,133.
369 399 Y C2FL3936CCCC 1,932. 2,148.
429 399 C2FL3942ECCC 1,980. 2,258.
429 399 Y C2FL3942CCCC 1,994. 2,272.
519 case with 4-129 drawers with hanging rails 309 519 C2FL5130ECCCC 2,389. 2,648.
309 519 Y C2FL5130CCCCC 2,402. 2,664.
369 519 C2FL5136ECCCC 2,451. 2,792.
369 519 Y C2FL5136CCCCC 2,464. 2,808.
429 519 C2FL5142ECCCC 2,527. 2,949.
429 519 Y C2FL5142CCCCC 2,542. 2,957.
Order Code
Example: S2FL2730CCC
C Calibre
2 Generation
FL Lateral File, LaminateFront
27 279 High
30 309 Wide
C Knoll Lock
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
118 Case Paint Finish
118 Laminate Front Finish
T Pull Type
AA Pull Finish
Specification Information
L1= L1 laminate finish
L2= L2 laminate finish
Note: Laminate Front lateral fileswill not accept standard lateral fileworksurface tops.
Laminate Front files cannot acceptadd-on modules.
Laminate Front files without locksinclude black Knoll-logo insert inthe same position. Insert may beremoved to retrofit a lock later.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories, page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP paperssizes.
See KnollKey lock program on page137 for keying information.
Actual Outside Case Height 26 27/329
Actual Inside Case Height 249
Files are 18 7/89 deep.
Drawer configurations read from topto bottom of case. Interiors notedwith rails includes front to back andside to side hanging rails. Refer tofront planning pages for additionalinformation.
Laminate Front files do not acceptCalibre label holders.
Calibre
74
Series 2 Front Lateral Files2 high, 3 high and 4 high
description w h lock pattern no. P1 P2 P3
279 case with 2-129 drawers with hanging rails 309 279 S2F2730ECC $998. $1,101. $1,158.
309 279 Y S2F2730CCC 1,061. 1,169. 1,229.
369 279 S2F2736ECC 1,126. 1,239. 1,303.
369 279 Y S2F2736CCC 1,192. 1,311. 1,381.
429 279 S2F2742ECC 1,225. 1,352. 1,414.
429 279 Y S2F2742CCC 1,287. 1,423. 1,490.
399 case with 3-129 drawers with hanging rails 309 399 S2F3930ECCC 1,377. 1,518. 1,592.
309 399 Y S2F3930CCCC 1,436. 1,584. 1,665.
369 399 S2F3936ECCC 1,530. 1,688. 1,779.
369 399 Y S2F3936CCCC 1,598. 1,762. 1,851.
429 399 S2F3942ECCC 1,675. 1,849. 1,932.
429 399 Y S2F3942CCCC 1,739. 1,917. 2,014.
519 case with 4-129 drawers with hanging rails 309 519 S2F5130ECCCC 1,772. 1,947. 2,053.
309 519 Y S2F5130CCCCC 1,835. 2,021. 2,125.
369 519 S2F5136ECCCC 1,991. 2,197. 2,310.
369 519 Y S2F5136CCCCC 2,060. 2,270. 2,382.
429 519 S2F5142ECCCC 2,226. 2,452. 2,569.
429 519 Y S2F5142CCCCC 2,286. 2,522. 2,647.
Order Code
Example: S2F2730CCC-115
S Series 2 Front
2 Generation
F Lateral File
27 279 High
30 309 Wide
C Knoll Lock
C 129 Drawer withHanging Rails
C 129 Drawer withHanging Rails
115 Medium Grey (P1 paintpricing)
Specification Information
P1= painted finishes
P2= painted finishes
P3= painted finishes
Note: S2 front lateral files will notaccept standard lateral fileworksurface tops.
Series 2 front files cannot acceptadd-on modules.
Series 2 front files without locksinclude black Knoll-logo insert inthe same position. Insert may beremoved to retrofit a lock later.
Application Notes
Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories, page 76).
Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP paperssizes.
See KnollKey lock program on page137 for keying information.
Critical Dimensions
Actual Outside Case Height 26 27/329
Actual Inside Case Height 249
S2 files are 18 7/89 deep.
Drawer configurations read from topto bottom of case. Interiors notedwith rails includes front to back andside to side hanging rails. Refer tofront planning pages for additionalinformation.
Label holders are not included withfiles. Please see Accessories page76 .
Calibre
75
Cal
ibre
File
Col
lect
ion
Calibre File Accessories
description h d w pattern no. list price P1 P2 P3
Label holder, (package of 10) 5ZNNL $55.
Front-to-back hanging rails (2) 5ZNNF 58.
Hanging rail (1) 309 5Z4NB 20.
369 5Z6NB 20.
429 5Z8NB 20.
Counterweight kit for freestanding files andcabinets
309 5Z4C2NM 153.
369 5Z6C2NM 153.
429 5Z8C2NM 153.
Adjustable cabinet shelves (package of 2) 159 5ZAC2AS 76. 83. 86.
189 5ZCC2AS 76. 83. 86.
309 5Z4C2AS 116. 131. 137.
369 5Z6C2AS 116. 131. 137.
Application Notes
Label HoldersLabel holders are designed forstandard Calibre fronts.Paper labels are included.
Hanging RailsHanging rails for front-to-back andside-to-side filing are providedstandard. Order two hanging railsand front-to-back hanging rails asneeded to convert a component.
Ganging Hardware KitMultiple freestanding files orcabinets should be ganged forsecurity.
Counterweight KitSingle freestanding files (two andthree-high) should be weighted witha counterweight. Specify accordingto case width.
Lateral file top intended for use withCalibre front files only.
Adjustable DividersFixed shelves with receding doorinclude attachment back and threeD-ring shelf dividers, standard.Separately specified AttachmentBack with three D-ring dividers isavailable for use within rolloutdrawers and pullout shelves withopenings 10.59 high or larger.Attachment backs are not designedfor use within 39, 69, 7.59 or 99openings. Additional adjustabledividers (5ZNNE) may be specifiedas needed.
Adjustable ShelvesAdjustable shelves are painted inBlack standard. If Calibre standardP1, P2 or P3 paints are required adda ‘‘P’’ suffix to the pattern numberand select the appropriate paintgrade. Example 5ZAC2ASP
Calibre
76
Calibre File Accessories
description h d w pattern no. list price P1 P2 P3
Coat rod with shelf (package of 1) 159 5ZAC2NR $76.
189 5ZCC2NR 76.
309 5Z4C2NR 76.
369 5Z6C2NR 76.
Attachment Back with D-Ring Dividers 309 5Z4N2P 50.
369 5Z6N2P 50.
429 5Z8N2P 50.
Adjustable dividers (package of 3) 8 3/89 9 1/29 29 5ZNNE 33.
Ganging hardware kit 5Z4NN n/c
Application Notes
Label HoldersLabel holders are designed forstandard Calibre fronts.Paper labels are included.
Hanging RailsHanging rails for front-to-back andside-to-side filing are providedstandard. Order two hanging railsand front-to-back hanging rails asneeded to convert a component.
Ganging Hardware KitMultiple freestanding files orcabinets should be ganged forsecurity.
Counterweight KitSingle freestanding files (two andthree-high) should be weighted witha counterweight. Specify accordingto case width.
Lateral file top intended for use withCalibre front files only.
Adjustable DividersFixed shelves with receding doorinclude attachment back and threeD-ring shelf dividers, standard.Separately specified AttachmentBack with three D-ring dividers isavailable for use within rolloutdrawers and pullout shelves withopenings 10.59 high or larger.Attachment backs are not designedfor use within 39, 69, 7.59 or 99openings. Additional adjustabledividers (5ZNNE) may be specifiedas needed.
Adjustable ShelvesAdjustable shelves are painted inBlack standard. If Calibre standardP1, P2 or P3 paints are required adda ‘‘P’’ suffix to the pattern numberand select the appropriate paintgrade. Example 5ZAC2ASP
Calibre
77
Cal
ibre
File
Col
lect
ion
Calibre Pedestalsfloorstanding pedestal - 189 deep
description w d h lock pattern no. P1 P2 P3
Floorstanding pedestal05 = box/box/file
159 189 26 7/89 3B18E05 $796. $838. $879.
159 189 26 7/89 Y 3B18C05 840. 883. 929.
Floorstanding pedestal06 = personal/personal/box/file
159 189 26 7/89 3B18E06 881. 927. 970.
159 189 26 7/89 Y 3B18C06 925. 970. 1,017.
Floorstanding pedestal07 = file/file
159 189 26 7/89 3B18E07 763. 801. 843.
159 189 26 7/89 Y 3B18C07 807. 848. 887.
Floorstanding pedestal10 = 3/10.5/10.5
159 189 26 7/89 3B18E10 827. 909. 955.
159 189 26 7/89 Y 3B18C10 869. 956. 1,004.
Order Code
Example: 3B18C07-612
3 Standard height
B Floorstanding pedestal
18 189 deep
C Knoll lock
7 File/file
612 Medium metallic grey
Specification Information
To order, specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:
C Knoll lockE No lock
Pedestal configuration options:05 = 6/6/1206 = 3/3/6/1207 = 12/12
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
189 floorstanding pedestals to beused beneath 189 deepworksurfaces, credenzas, and returntops.
Pedestals are attached to either endof any worksurface over 309W. Caseconstruction allows use of pedestalsas worksurface support.
Standard depth file drawersaccommodate letter-width filingfront-to-back and legal widthside-to-side.
File drawers include file hangingbars.
Additional pedestal accessoriesmust be ordered separately, seepage 101.
189d pedestal file drawer provides169 of letter filing and 12.59 of legalfiling.
Pedestals are available in paintedsteel only with standard Calibrefronts.
Standard =14 7/89W x 17 1/49D x 26 7/89H(± 1/169)
Options:
Calibre pedestals without locksinclude black, Knoll-logo insert inthe same position. Insert may beremoved to retrofit a lock later.
Calibre
78
Calibre Pedestalsfloorstanding pedestal - 249 deep
description w d h lock pattern no. P1 P2 P3
Floorstanding pedestal05 = box/box/file
159 249 26 7/89 3B24E05 $886. $932. $980.
159 249 26 7/89 Y 3B24C05 930. 979. 1,025.
Floorstanding pedestal06 = personal/personal/box/file
159 249 26 7/89 3B24E06 966. 1,015. 1,064.
159 249 26 7/89 Y 3B24C06 1,012. 1,061. 1,116.
Floorstanding pedestal07 = file/file
159 249 26 7/89 3B24E07 850. 892. 937.
159 249 26 7/89 Y 3B24C07 889. 937. 986.
Floorstanding pedestal08 = personal/box/EDP
159 249 26 7/89 3B24E08 966. 1,015. 1,064.
159 249 26 7/89 Y 3B24C08 1,012. 1,061. 1,116.
Order Code
Example: 3B24C07-612
3 Standard height
B Floorstanding pedestal
24 249 deep
C Knoll lock
7 File/file
612 Medium metallic grey
Specification Information
To order, specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:
C Knoll lockE No lock
Pedestal configuration options:05 = 6/6/1206 = 3/3/6/1207 = 12/1208 = 3/6/15
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
249 floorstanding pedestals to beused beneath 249 deepworksurfaces, credenzas, and returntops.
Pedestals are attached to either endof any worksurface over 309W. Caseconstruction allows use of pedestalsas worksurface support.
Standard depth file drawersaccommodate letter-width filingfront-to-back and legal widthside-to-side.
File drawers include file hangingbars.
Additional pedestal accessoriesmust be ordered separately, seepage 101.
249d pedestal file drawer provides21.259 of letter filing and 12.59 oflegal filing.
Pedestals are available in paintedsteel only with standard Calibrefronts.
Standard = 14 7/89W x 23 1/49D x26 7/89H(± 1/169)
Options:
Calibre pedestals without locksinclude black, Knoll-logo insert inthe same position. Insert may beremoved to retrofit a lock later.
Calibre
79
Cal
ibre
Fron
tP
edes
tals
Calibre Pedestalsfloorstanding pedestal - 249 deep
description w d h lock pattern no. P1 P2 P3
Floorstanding pedestal10 = 3/10.5/10.5
159 249 26 7/89 3B24E10 $911. $1,004. $1,053.
159 249 26 7/89 Y 3B24C10 955. 1,049. 1,100.
Order Code
Example: 3B24C07-612
3 Standard height
B Floorstanding pedestal
24 249 deep
C Knoll lock
7 File/file
612 Medium metallic grey
Specification Information
To order, specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:
C Knoll lockE No lock
Pedestal configuration options:05 = 6/6/1206 = 3/3/6/1207 = 12/1208 = 3/6/15
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
249 floorstanding pedestals to beused beneath 249 deepworksurfaces, credenzas, and returntops.
Pedestals are attached to either endof any worksurface over 309W. Caseconstruction allows use of pedestalsas worksurface support.
Standard depth file drawersaccommodate letter-width filingfront-to-back and legal widthside-to-side.
File drawers include file hangingbars.
Additional pedestal accessoriesmust be ordered separately, seepage 101.
249d pedestal file drawer provides21.259 of letter filing and 12.59 oflegal filing.
Pedestals are available in paintedsteel only with standard Calibrefronts.
Standard = 14 7/89W x 23 1/49D x26 7/89H(± 1/169)
Options:
Calibre pedestals without locksinclude black, Knoll-logo insert inthe same position. Insert may beremoved to retrofit a lock later.
Calibre
80
Calibre PedestalsOptions - 249 deep without back
description w d h lock pattern no. P1 P2 P3
Floorstanding pedestalbox/box/file
159 249 26 7/89 CS2PFN24A $670. $704. $738.
159 249 26 7/89 Y CS2PFL24A 712. 748. 785.
Floorstanding pedestalfile/file
159 249 26 7/89 CS2PFN24B 638. 671. 704.
159 249 26 7/89 Y CS2PFL24B 682. 714. 750.
Calibre Options Pedestal Back 159 n/a 26 7/89 CS2XPB 101. 118. 123.
Order Code
Example: CS2PFL24A
CS2 Calibre Front
P Pedestal
F Floorstanding
L Locking
24 249 Deep
A Box/Box/File
Specification Information
To order, specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations
(Box/Box/File and File/FileOnly)
4. Paint finish options
Pedestal lock options:
L Knoll lockN No lock
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
249 floorstanding pedestals to beused beneath 249 deepworksurfaces, credenzas, and returntops. Please note that CalibreOptions pedestals do not come witha back panel. Back panels mustbe ordered separately. Refer topattern number DS2XPB withinthe Series 2 Storage price list.
Pedestals are attached to either endof any worksurface over 309W. Caseconstruction allows use of pedestalsas worksurface support.
Standard depth file drawersaccommodate letter-width filingfront-to-back and legal widthside-to-side.
File drawers do not include filehanging bars.
Additional pedestal accessoriesmust be ordered separately, seepage 101.
249d Calibre Options pedestal filedrawer provides 18.259 of letterfiling and 129 of legal filing.
Critical Dimensions
Pedestals are available in paintedsteel only with standard Calibrefronts.
Pedestal accessories, see page 101.
Dimensions under, w, d and h areactual to the nearest 1/169
249 Deep Floorstanding PedestalInternal Drawer Dimensions
Standard = 14 7/89W x 23 1/49D x26 7/89H(± 1/169)
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Calibre
81
Cal
ibre
Fron
tP
edes
tals
Calibre Pedestalsfloorstanding pedestal - 309 deep
description w d h lock pattern no. P1 P2 P3
Floorstanding pedestal05 = box/box/file
159 309 26 7/89 3B30E05 $932. $980. $1,026.
159 309 26 7/89 Y 3B30C05 977. 1,021. 1,076.
Floorstanding pedestal06 = personal/personal/box/file
159 309 26 7/89 3B30E06 1,064. 1,122. 1,177.
159 309 26 7/89 Y 3B30C06 1,112. 1,164. 1,224.
Floorstanding pedestal07 = file/file
159 309 26 7/89 3B30E07 889. 937. 986.
159 309 26 7/89 Y 3B30C07 936. 983. 1,031.
Floorstanding pedestal10 = 3/10.5/10.5
159 309 26 7/89 3B30E10 958. 1,053. 1,106.
159 309 26 7/89 Y 3B30C10 1,001. 1,098. 1,156.
Order Code
Example: 3B30C07-612
3 Standard height
B Floorstanding pedestal
30 309 deep
C Knoll lock
7 File/file
612 Medium metallic grey
Specification Information
To order, specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:
C Knoll lockE No lock
Pedestal configuration options:05 = 6/6/1206 = 3/3/6/1207 = 12/12
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
309 floorstanding pedestals to beused beneath 309 deepworksurfaces, credenzas, and returntops.
Pedestals are attached to either endof any worksurface over 309W. Caseconstruction allows use of pedestalsas worksurface support.
Standard depth file drawersaccommodate letter-width filingfront-to-back and legal widthside-to-side.
File drawers include file hangingbars.
Additional pedestal accessoriesmust be ordered separately, seepage 42.
309d pedestal file drawer provides27.259 of letter filing and 12.59 oflegal filing.
Pedestals are available in paintedsteel only with standard Calibrefronts.
Standard = 14 7/89W x 29 1/49D x 267/8 ‘‘H(+- 1/16’’)
Options:
Calibre pedestals without locksinclude black, Knoll-logo insert inthe same position. Insert may beremoved to retrofit a lock later.
Pedestal accessories, see page 101.
Calibre
82
Calibre Pedestalsdouble-wide floorstanding pedestal w/lock - 199 deep
description type w d h lock pattern no. P1 P2 P3
Double-wide pedestal std height 309 18 3/49 26 7/89 Y 3DW4CC $1,006. $1,100. $1,161.
std height 369 18 3/49 26 7/89 Y 3DW6CC 1,100. 1,213. 1,276.
Double-wide pedestal3/10.5/10.5 drawer configuration
309 18 3/49 26 7/89 Y 3DW4IDD 1,310. 1,438. 1,512.
369 18 3/49 26 7/89 Y 3DW6IDD 1,437. 1,583. 1,660.
Order Code
Example: 3DW4CC-613
3 Standard height
DW Double-wide
4 309 wide
C Calibre front
C Knoll lock
613 Silver paint finish
Specification Information
To order, specify:
1. Pattern number2. Paint finish
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Application Notes
The double-wide pedestalincorporates two 129 drawers in a309 or 369 width and is intended forbelow workstation applications only.
The double-wide pedestal cannot beused as a freestanding standaloneitem. It is designed to attach to asystems worksurface and thereforedoes not have a finished top orinterlock mechanism to preventboth drawers from being openedsimultaneously.
Includes hanging file bars for letter,legal, front-to-back and side-to-sidefiling.
Double-wide pedestal isnominally 19(D and will not fitunder 18(D worksurfaces.
The actual depth of doublewidepedestals is 18 3/4(
See page 5 for 309w and 369w filingcapacities.
Calibre
83
Cal
ibre
Fron
tP
edes
tals
Calibre Pedestalsmobile pedestal - 189 deepwithout handle
description w d h lock pattern no. P1 P2 P3
Mobile pedestal01 = box/file
159 189 20 5/89 Y 3C18C01 $1,083. $1,137. $1,194.
Mobile pedestal05 = box/box/file
159 189 26 3/89 Y 3C18C05 1,160. 1,214. 1,279.
Mobile pedestal07= file/file
159 189 26 3/89 Y 3C18C07 1,113. 1,165. 1,226.
Order Code
Example: 3C18C01-612
3 Standard height
C Mobile pedestal
18 17 1/29 deep
C Knoll lock
01 box/file
612 Medium metallic grey
Specification Information
To order specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:C Knoll lock
Pedestal configuration options:01 = 6/1205 = 6/6/1207 = 12/12
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
Mobile pedestals to be used beneath249, 309 or 369 deep worksurfaces,credenzas, and return tops.
Mobile pedestals include lockingcasters.
Mobile pedestals will not fit undermachine height worksurfaces.
File drawers include file hangingbars.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Actual dimensions are:14 7/89 W x 16 3/49D
Options:Pedestal accessories, see page 101.
189d pedestal file drawer provides169 of letter filing or 12.59 of legalfiling.
Calibre
84
Calibre Pedestalsmobile pedestal - 189 deepwith handle
description w d h lock pattern no. P1 P2 P3
Mobile pedestal01 = box / file
159 189 20 5/89 Y 3C18CP01 $1,168. $1,227. $1,288.
Mobile pedestal05 = box / box / file
159 189 26 3/89 Y 3C18CP05 1,249. 1,306. 1,372.
Mobile pedestal07 = file / file
159 189 26 3/89 Y 3C18CP07 1,202. 1,259. 1,322.
Order Code
Example: 3C18CP01-612
3 Standard height
C Mobile pedestal
18 17 1/29 deep
C Knoll lock
P with handle
01 box/file
612 Medium metallic grey
Specification Information
To order specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:C Knoll lock
Pedestal configuration options:01 = 6/1205 = 6/6/1207 = 12/12
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
Mobile pedestals to be used beneath249, 309 or 369 deep worksurfaces,credenzas, and return tops.
Mobile pedestals include lockingcasters.
Mobile pedestals will not fit undermachine height worksurfaces.
File drawers include file hangingbars.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Pedestal handle is black.
Actual dimensions are:14 7/89 W x 16 3/49D
Options:Pedestal accessories, see page 101.
189d pedestal file drawer provides169 of letter filing or 12.59 of legalfiling.
Calibre
85
Cal
ibre
Fron
tP
edes
tals
Calibre Pedestalsmobile pedestal - 189 deepwithout top and without handle(pedestal cushion ordered separately)
description w d h locks pattern no. P1 P2 P3
Mobile pedestal01 = box / file
159 189 20 5/89 Y 3O18C01 $1,017. $1,075. $1,131.
Mobile pedestal05 = box / box / file
159 189 26 3/89 Y 3O18C05 1,092. 1,155. 1,209.
Mobile pedestal07 = file / file
159 189 26 3/89 Y 3O18C07 1,047. 1,100. 1,160.
Order Code
Example: 3O18C01-612
3 Standard height
O Mobile pedestal withouttop
18 17 1/29 deep
C Knoll lock
01 box/file
612 Medium metallic grey
Specification Information
To order specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:C Knoll lock
Pedestal configuration options:01 = 6/1205 = 6/6/1207 = 12/12
See page 17 for paint finishes
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
Mobile pedestals to be used beneath249, 309 or 369 deep worksurfaces,credenzas, and return tops.
Mobile pedestals include lockingcasters.
Mobile pedestals will not fit undermachine height worksurfaces.
File drawers include file hangingbars.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Actual dimensions are:14 7/89 W x 16 3/49D
Options:
Pedestal accessories, see page 101
189d pedestal file drawer provides169 of letter filing or 12.59 of legalfiling.
Calibre
86
Calibre Pedestalsmobile pedestal - 189 deepwithout top and with handle(pedestal cushion ordered separately)
description w d h lock pattern no. P1 P2 P3
Mobile pedestal01 = box / file
159 189 20 5/89 Y 3O18CP01 $1,112. $1,163. $1,223.
Mobile pedestal05 = box / box / file
159 189 26 3/89 Y 3O18CP05 1,188. 1,244. 1,305.
Mobile pedestal07 = file/ file
159 189 26 3/89 Y 3O18CP07 1,138. 1,195. 1,255.
Order Code
Example: 3O18P01-612
3 Standard height
O Mobile pedestal withouttop
18 17 1/29 deep
C Knoll lock
P with handle
01 box/file
612 Medium metallic grey
Specification Information
To order specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:C Knoll lock
Pedestal configuration options:01 = 6/1205 = 6/6/1207 = 12/12
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
Mobile pedestals to be used beneath249, 309 or 369 deep worksurfaces,credenzas, and return tops.
Mobile pedestals include lockingcasters.
Mobile pedestals will not fit undermachine height worksurfaces.
File drawers include file hangingbars.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Pedestal handle is black.
Actual dimensions are:14 7/89 W x 16 3/49D
189d pedestal file drawer provides169 of letter filing or 12.59 of legalfiling.
Calibre
87
Cal
ibre
Fron
tP
edes
tals
Calibre Pedestalsmobile pedestal - 249 deepwithout handle
description w d h lock pattern no. P1 P2 P3
Mobile pedestal01 = box/file
159 249 20 5/89 Y 3C24C01 $1,203. $1,267. $1,330.
Mobile pedestal05 = box/box/file
159 249 26 3/89 Y 3C24C05 1,284. 1,347. 1,417.
Mobile pedestal06 = personal/ personal/box/file
159 249 26 3/89 Y 3C24C06 1,358. 1,428. 1,500.
Mobile pedestal07 = file/file
159 249 26 3/89 Y 3C24C07 1,231. 1,295. 1,361.
Order Code
Example: 3C24C01-612
3 Standard height
C Mobile pedestal
24 23 1/29 deep
C Knoll lock
01 box/file
612 Medium metallic grey
Specification Information
To order specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:C Knoll lock
Pedestal configuration options:01 = 6/1205 = 6/6/1206 = 3/3/6/1207 = 12/1208 = 3/6/1509 = 3/6/12
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
Mobile pedestals to be used beneath249, 309 or 369 deep worksurfaces,credenzas, and return tops.
Mobile pedestals include lockingcasters.
26 3/89 Mobile pedestals will not fitunder machine height worksurfaces.
File drawers include file hangingbars.
Additional pedestal accessoriesmust be ordered separately.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Actual dimensions are:14 7/89 W x 22 3/49D
Options:
Pedestal accessories, see page 101.
249d pedestal file drawer provides21.259 of letter filing or 12.59 oflegal filing.
Calibre
88
Calibre Pedestalsmobile pedestal - 249 deepwithout handle
description w d h lock pattern no. P1 P2 P3
Mobile pedestal08 = personal/box/EDP
159 249 26 3/89 Y 3C24C08 $1,315. $1,382. $1,452.
Mobile pedestal09 = personal/box/file
159 249 23 5/89 Y 3C24C09 1,262. 1,325. 1,393.
Order Code
Example: 3C24C01-612
3 Standard height
C Mobile pedestal
24 23 1/29 deep
C Knoll lock
01 box/file
612 Medium metallic grey
Specification Information
To order specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:C Knoll lock
Pedestal configuration options:01 = 6/1205 = 6/6/1206 = 3/3/6/1207 = 12/1208 = 3/6/1509 = 3/6/12
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
Mobile pedestals to be used beneath249, 309 or 369 deep worksurfaces,credenzas, and return tops.
Mobile pedestals include lockingcasters.
26 3/89 Mobile pedestals will not fitunder machine height worksurfaces.
File drawers include file hangingbars.
Additional pedestal accessoriesmust be ordered separately.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Actual dimensions are:14 7/89 W x 22 3/49D
Options:
Pedestal accessories, see page 101.
249d pedestal file drawer provides21.259 of letter filing or 12.59 oflegal filing.
Calibre
89
Cal
ibre
Fron
tP
edes
tals
Calibre Pedestalsmobile pedestal - 249 deepwith handle
description w d h lock pattern no. P1 P2 P3
Mobile pedestal01 = box / file
159 249 20 5/89 Y 3C24CP01 $1,294. $1,354. $1,426.
Mobile pedestal05 = box / box / file
159 249 26 3/89 Y 3C24CP05 1,373. 1,437. 1,511.
Mobile pedestal06 = personal / personal / box / file
159 249 26 3/89 Y 3C24CP06 1,450. 1,516. 1,589.
Order Code
Example: 3C24CP01-612
3 Standard height
C Mobile pedestal
24 23 1/29 deep
C Knoll lock
P with handle
01 box/file
612 Medium metallic grey
Specification Information
To order specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:C Knoll lock
Pedestal configuration options:01 = 6/1205 = 6/6/1206 = 3/3/6/1207 = 12/1208 = 3/6/1509 = 3/6/12
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
Mobile pedestals to be used beneath249, 309 or 369 deep worksurfaces,credenzas, and return tops.
Mobile pedestals include lockingcasters.
26 5/89 Mobile pedestals will not fitunder machine height worksurfaces.
File drawers include file hangingbars.
Additional pedestal accessoriesmust be ordered separately.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Pedestal handle is black.
Actual dimensions are:14 7/89 W x 22 3/49D
Options:Pedestal accessories, see page 101.
249d pedestal file drawer provides21.259 of letter filing or 12.59 oflegal filing.
Calibre
90
Calibre Pedestalsmobile pedestal - 249 deepwith handle
description w d h lock pattern no. P1 P2 P3
Mobile pedestal07 = file / file
159 249 26 3/89 Y 3C24CP07 $1,323. $1,385. $1,454.
Mobile pedestal08 = personal / box / EDP
159 249 26 3/89 Y 3C24CP08 1,408. 1,475. 1,548.
Mobile pedestal09 = personal / box / file
159 249 23 5/89 Y 3C24CP09 1,353. 1,418. 1,487.
Order Code
Example: 3C24CP01-612
3 Standard height
C Mobile pedestal
24 23 1/29 deep
C Knoll lock
P with handle
01 box/file
612 Medium metallic grey
Specification Information
To order specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:C Knoll lock
Pedestal configuration options:01 = 6/1205 = 6/6/1206 = 3/3/6/1207 = 12/1208 = 3/6/1509 = 3/6/12
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
Mobile pedestals to be used beneath249, 309 or 369 deep worksurfaces,credenzas, and return tops.
Mobile pedestals include lockingcasters.
26 5/89 Mobile pedestals will not fitunder machine height worksurfaces.
File drawers include file hangingbars.
Additional pedestal accessoriesmust be ordered separately.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Pedestal handle is black.
Actual dimensions are:14 7/89 W x 22 3/49D
Options:Pedestal accessories, see page 101.
249d pedestal file drawer provides21.259 of letter filing or 12.59 oflegal filing.
Calibre
91
Cal
ibre
Fron
tP
edes
tals
Calibre Pedestalsmobile pedestal - 249 deepwithout top(pedestal cushion ordered separately)
description w d h lock pattern no. P1 P2 P3
Mobile pedestal01 = box / file
159 249 20 5/89 Y 3O24C01 $1,139. $1,202. $1,261.
Mobile pedestal05 = box / box / file
159 249 26 3/89 Y 3O24C05 1,219. 1,285. 1,349.
Mobile pedestal06 = personal / personal / box / file
159 249 26 3/89 Y 3O24C06 1,294. 1,365. 1,432.
Order Code
Example: 3O24C01-612
3 Standard height
O Mobile pedestal withouttop
24 23 1/29 deep
C Knoll lock
01 box/file
612 Medium metallic grey
Specification Information
To order specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:C Knoll lock
Pedestal configuration options:01 = 6/1205 = 6/6/1206 = 3/3/6/1207 = 12/1208 = 3/6/1509 = 3/6/12
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
Mobile pedestals to be used beneath249, 309 or 369 deep worksurfaces,credenzas, and return tops.
Mobile pedestals include lockingcasters.
26 3/89 Mobile pedestals will not fitunder machine height worksurfaces.
File drawers include file hangingbars.
Additional pedestal accessoriesmust be ordered separately.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Actual dimensions are:14 7/89 W x 22 3/49D
Options:
Pedestal accessories, see page 101.
249d pedestal file drawer provides21.259 of letter filing or 12.59 oflegal filing.
Calibre
92
Calibre Pedestalsmobile pedestal - 249 deepwithout top(pedestal cushion ordered separately)
description w d h lock pattern no. P1 P2 P3
Mobile pedestal07 = file / file
159 249 26 3/89 Y 3O24C07 $1,166. $1,231. $1,294.
Mobile pedestal08 = personal / box / EDP
159 249 26 3/89 Y 3O24C08 1,252. 1,321. 1,385.
Mobile pedestal09 = personal / box / file
159 249 23 5/89 Y 3O24C09 1,200. 1,262. 1,325.
Order Code
Example: 3O24C01-612
3 Standard height
O Mobile pedestal withouttop
24 23 1/29 deep
C Knoll lock
01 box/file
612 Medium metallic grey
Specification Information
To order specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:C Knoll lock
Pedestal configuration options:01 = 6/1205 = 6/6/1206 = 3/3/6/1207 = 12/1208 = 3/6/1509 = 3/6/12
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
Mobile pedestals to be used beneath249, 309 or 369 deep worksurfaces,credenzas, and return tops.
Mobile pedestals include lockingcasters.
26 3/89 Mobile pedestals will not fitunder machine height worksurfaces.
File drawers include file hangingbars.
Additional pedestal accessoriesmust be ordered separately.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Actual dimensions are:14 7/89 W x 22 3/49D
Options:
Pedestal accessories, see page 101.
249d pedestal file drawer provides21.259 of letter filing or 12.59 oflegal filing.
Calibre
93
Cal
ibre
Fron
tP
edes
tals
Calibre Pedestalsmobile pedestal - 249 deepwithout top and with handle(pedestal cushion ordered separately)
description w d h lock pattern no. P1 P2 P3
Mobile pedestal01 = box / file
159 249 20 5/89 Y 3O24CP01 $1,230. $1,293. $1,356.
Mobile pedestal05 = box / box / file
159 249 26 3/89 Y 3O24CP05 1,310. 1,376. 1,443.
Mobile pedestal06 = personal / personal / box / file
159 249 26 3/89 Y 3O24CP06 1,383. 1,453. 1,524.
Order Code
Example: 3O24CP01-612
3 Standard height
O Mobile pedestal withouttop
24 23 1/29 deep
C Knoll lock
P with handle
01 box/file
612 Medium metallic grey
Specification Information
To order specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:C Knoll lock
Pedestal configuration options:01 = 6/1205 = 6/6/1206 = 3/3/6/1207 = 12/1208 = 3/6/1509 = 3/6/12
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
Mobile pedestals to be used beneath249, 309 or 369 deep worksurfaces,credenzas, and return tops.
Mobile pedestals include lockingcasters.
26 5/89 Mobile pedestals will not fitunder machine height worksurfaces.
File drawers include file hangingbars.
Additional pedestal accessoriesmust be ordered separately.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Pedestal handle is black.
Actual dimensions are:14 7/89 W x 22 3/49D
Options:Pedestal accessories, see page 101.
249d pedestal file drawer provides21.259 of letter filing or 12.59 oflegal filing.
Calibre
94
Calibre Pedestalsmobile pedestal - 249 deepwithout top and with handle(pedestal cushion ordered separately)
description w d h lock pattern no. P1 P2 P3
Mobile pedestal07 = file / file
159 249 26 3/89 Y 3O24CP07 $1,260. $1,323. $1,390.
Mobile pedestal08 = personal / box / EDP
159 249 26 3/89 Y 3O24CP08 1,343. 1,413. 1,481.
Mobile pedestal09 = personal / box / file
159 249 23 5/89 Y 3O24CP09 1,289. 1,353. 1,424.
Order Code
Example: 3O24CP01-612
3 Standard height
O Mobile pedestal withouttop
24 23 1/29 deep
C Knoll lock
P with handle
01 box/file
612 Medium metallic grey
Specification Information
To order specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:C Knoll lock
Pedestal configuration options:01 = 6/1205 = 6/6/1206 = 3/3/6/1207 = 12/1208 = 3/6/1509 = 3/6/12
See page 17 for paint finishes.
Add a ‘‘Y’’ to the end of a patternnumber to specify a front color thatis different from the case color. P3pricing automatically applies for allcolors when utilizing this option.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
Mobile pedestals to be used beneath249, 309 or 369 deep worksurfaces,credenzas, and return tops.
Mobile pedestals include lockingcasters.
26 5/89 Mobile pedestals will not fitunder machine height worksurfaces.
File drawers include file hangingbars.
Additional pedestal accessoriesmust be ordered separately.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Pedestal handle is black.
Actual dimensions are:14 7/89 W x 22 3/49D
Options:Pedestal accessories, see page 101.
249d pedestal file drawer provides21.259 of letter filing or 12.59 oflegal filing.
Calibre
95
Cal
ibre
Fron
tP
edes
tals
Calibre PedestalsFloorstanding pedestals with individual drawer locks - 189, 249 and309 deep
description w d hSecuritySeparator pattern no. P1 P2 P3
Floorstanding pedestal05 = box/box/file
159 189 26 7/89 3B18W05 $1,014. $1,052. $1,101.
159 189 26 7/89 Y 3B18X05 1,068. 1,109. 1,163.
159 249 26 7/89 3B24W05 1,100. 1,148. 1,207.
159 249 26 7/89 Y 3B24X05 1,160. 1,203. 1,262.
159 309 26 7/89 3B30W05 1,148. 1,198. 1,256.
159 309 26 7/89 Y 3B30X05 1,203. 1,251. 1,313.
Floorstanding pedestal07 = file/file
159 189 26 7/89 3B18W07 908. 946. 996.
159 189 26 7/89 Y 3B18X07 960. 1,003. 1,052.
159 249 26 7/89 3B24W07 1,004. 1,046. 1,097.
159 249 26 7/89 Y 3B24X07 1,041. 1,083. 1,137.
159 309 26 7/89 3B30W07 1,039. 1,083. 1,137.
159 309 26 7/89 Y 3B30X07 1,090. 1,137. 1,194.
Order Code
Example: 3B18W07-612
3 Standard height
B Floorstanding pedestal
18 189 deep
W Individual lockingdrawers
7 File/file
612 Medium metallic grey
Specification Information
To order, specify:
1. Pattern number2. Pedestal configurations3. Paint finish options
Pedestal configuration options:05 =6/6/1207 =12/12
See page 17 for paint finishes.
All locks on individually lockingcomponents must be specified askey-alike using the KnollKey lockprogram as listed on page 137.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
189 floorstanding pedestals to beused beneath 189 deepworksurfaces, credenzas, and returntops.
Pedestals are attached to either endof any worksurface over 309W. Caseconstruction allows use of pedestalsas worksurface support.
Standard depth file drawersaccommodate letter-width filingfront-to-back and legal widthside-to-side.File drawers includefile hanging bars.
Additional pedestal accessoriesmust be ordered separately. Seepage 101.
Actual dimensions are:
Standard = 14 7/89W x 17 1/49D x26 7/89H(± 1/169)
Options:
Pedestal accessories, see page 101.
Calibre
96
Calibre PedestalsMobile pedestal with individual locks - 189 and 249 deepwithout handle
description w d hSecurityseparator pattern no. P1 P2 P3
Mobile pedestal01 = box/file
159 189 20 5/89 3C18W01 $1,185. $1,238. $1,298.
159 189 20 5/89 Y 3C18X01 1,219. 1,275. 1,336.
159 249 20 5/89 3C24W01 1,305. 1,368. 1,434.
159 249 20 5/89 Y 3C24X01 1,341. 1,405. 1,475.
Mobile pedestal05 = box/box/file
159 189 26 5/89 3C18W05 1,332. 1,390. 1,461.
159 189 26 5/89 Y 3C18X05 1,385. 1,443. 1,516.
159 249 26 5/89 3C24W05 1,455. 1,521. 1,597.
159 249 26 5/89 Y 3C24X05 1,511. 1,578. 1,655.
Mobile pedestal07 = file/file
159 189 26 5/89 3C18W07 1,212. 1,271. 1,332.
159 189 26 5/89 Y 3C18X07 1,249. 1,305. 1,371.
159 249 26 5/89 3C24W07 1,334. 1,395. 1,466.
159 249 26 5/89 Y 3C24X07 1,371. 1,433. 1,505.
Order Code
Example: 3C24W05-613
3 Standard height
C Mobile pedestal
24 23 1/29 deep
W Individual locks
05 Box/box/file
613 Silver paint finish
Specification Information
To order, specify:
1. Pattern number2. Pedestal configurations3. Paint finish options
P edestal configuration options:01 =6/1205 =6/6/1207 =12/12
See page 17 for paint finishes.
All locks on individually lockingcomponents must be specified askey-alike using KnollKey lockprogram as listed on page 137.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
Application Notes
Mobile pedestals to be used beneath249, 309, and 369 deepworksurfaces, credenzas, and returntops.
Mobile pedestals include lockingcasters.
26 5/89 mobile pedestals will not fitunder machine height worksurfaces.
File drawers include file hangingbars.
Additional pedestal accessoriesmust be ordered separately.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Actual dimensions are:
14 7/89W x 29 1/49D(± 1/169)
Calibre
97
Cal
ibre
Fron
tP
edes
tals
with
Indi
vidu
alLo
ckin
gD
raw
ers
Calibre PedestalsMobile pedestal with individual locks - 189 and 249 deepwith handle
description w d h separator pattern no. P1 P2 P3
Mobile pedestal01 = box / file
159 189 20 5/89 3C18WP01 $1,275. $1,330. $1,394.
159 189 20 5/89 Y 3C18XP01 1,310. 1,367. 1,433.
159 249 20 5/89 3C24WP01 1,394. 1,455. 1,529.
159 249 20 5/89 Y 3C24XP01 1,432. 1,493. 1,571.
Mobile pedestal05 = box / box / file
159 189 26 5/89 3C18WP05 1,426. 1,482. 1,557.
159 189 26 5/89 Y 3C18XP05 1,426. 1,482. 1,557.
159 249 26 5/89 3C24WP05 1,549. 1,613. 1,694.
159 249 26 5/89 Y 3C24XP05 1,601. 1,664. 1,751.
Mobile pedestal07 = file / file
159 189 26 5/89 3C18WP07 1,304. 1,361. 1,429.
159 189 26 5/89 Y 3C18XP07 1,339. 1,394. 1,465.
159 249 26 5/89 3C24WP07 1,427. 1,488. 1,561.
159 249 26 5/89 Y 3C24XP07 1,461. 1,522. 1,599.
Order Code
Example: 3C18WP01-612
3 Standard height
C Mobile pedestal
18 17 1/29 deep
W Without separator
P with handle
01 box/file
612 Medium metallic grey
Specification Information
To order specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:C Knoll lock
Pedestal configuration options:01 = 6/1205 = 6/6/1207 = 12/12
See page 17 for paint finishes.
All locks on individually lockingcomponents must be specified askey-alike using KnollKey lockprogram as listed on page 137.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
X units include security separator(s)
Application Notes
Mobile pedestals to be used beneath249, 309 or 369 deep worksurfaces,credenzas, and return tops.
Mobile pedestals include lockingcasters.
Mobile pedestals will not fit undermachine height worksurfaces.
File drawers include file hangingbars.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Actual dimensions are:14 7/89 W x 17 1/49D
14 7/89 W x 23 1/49D
Pedestal accessories, see page 101.
Calibre
98
Calibre PedestalsMobile pedestal with individual locks - 189 and 249 deepwithout top(pedestal cushion ordered separately)
description w d h separator pattern no. P1 P2 P3
Mobile pedestal01 = box / file
159 189 20 5/89 3O18W01 $1,122. $1,174. $1,231.
159 189 20 5/89 Y 3O18X01 1,159. 1,209. 1,273.
159 249 20 5/89 3O24W01 1,243. 1,304. 1,369.
159 249 20 5/89 Y 3O24X01 1,279. 1,339. 1,408.
Mobile pedestal05 = box / box / file
159 189 26 5/89 3O18W05 1,271. 1,325. 1,393.
159 189 26 5/89 Y 3O18X05 1,323. 1,381. 1,451.
159 249 26 5/89 3O24W05 1,393. 1,458. 1,534.
159 249 26 5/89 Y 3O24X05 1,450. 1,512. 1,587.
Mobile pedestal07 = file / file
159 189 26 5/89 3O18W07 1,148. 1,206. 1,267.
159 189 26 5/89 Y 3O18X07 1,188. 1,243. 1,304.
159 249 26 5/89 3O24W07 1,273. 1,334. 1,398.
159 249 26 5/89 Y 3O24X07 1,306. 1,371. 1,437.
Order Code
Example: 3O18W01-612
3 Standard height
O Mobile pedestal withouttop
18 17 1/29 deep
W Without separator
01 box/file
612 Medium metallic grey
Specification Information
To order specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:C Knoll lock
Pedestal configuration options:01 = 6/1205 = 6/6/1207 = 12/12
See page 17 for paint finishes.
All locks on individually lockingcomponents must be specified askey-alike using KnollKey lockprogram as listed on page 137.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
X units include security separator(s)
Application Notes
Mobile pedestals to be used beneath249, 309 or 369 deep worksurfaces,credenzas, and return tops.
Mobile pedestals include lockingcasters.
Mobile pedestals will not fit undermachine height worksurfaces.
File drawers include file hangingbars.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Actual dimensions are:14 7/89 W x 17 1/49D
14 7/89 W x 23 1/49D
Pedestal accessories, see page 101.
Calibre
99
Cal
ibre
Fron
tP
edes
tals
with
Indi
vidu
alLo
ckin
gD
raw
ers
Calibre PedestalsMobile pedestal with individual locks - 189 and 249 deepwithout top and with handle(pedestal cushion ordered separately)
description w d h separator pattern no. P1 P2 P3
Mobile pedestal01 = box / file
159 189 20 5/89 3O18WP01 $1,209. $1,233. $1,330.
159 189 20 5/89 Y 3O18XP01 1,248. 1,301. 1,368.
159 249 20 5/89 3O24WP01 1,332. 1,393. 1,464.
159 249 20 5/89 Y 3O24XP01 1,369. 1,430. 1,502.
Mobile pedestal05 = box / box / file
159 189 26 5/89 3O18WP05 1,361. 1,418. 1,487.
159 189 26 5/89 Y 3O18XP05 1,415. 1,472. 1,547.
159 249 26 5/89 3O24WP05 1,485. 1,551. 1,628.
159 249 26 5/89 Y 3O24XP05 1,540. 1,602. 1,685.
Mobile pedestal07 = file / file
159 189 26 5/89 3O18WP07 1,242. 1,295. 1,361.
159 189 26 5/89 Y 3O18XP07 1,276. 1,332. 1,396.
159 249 26 5/89 3O24WP07 1,363. 1,427. 1,499.
159 249 26 5/89 Y 3O24XP07 1,395. 1,461. 1,535.
Order Code
Example: 3O18WP01-612
3 Standard height
O Mobile pedestal withouttop
18 17 1/29 deep
W Without separator
P with handle
01 box/file
612 Medium metallic grey
Specification Information
To order specify:
1. Pattern number2. Pedestal lock options3. Pedestal configurations4. Paint finish options
Pedestal lock options:C Knoll lock
Pedestal configuration options:01 = 6/1205 = 6/6/1207 = 12/12
See page 17 for paint finishes.
All locks on individually lockingcomponents must be specified askey-alike using KnollKey lockprogram as listed on page 137.
Add an ‘‘F’’ to the end of the patternnumber to receive full extensionslides on all box drawers. Upchargeis $25 list per pedestal.
X units include security separator(s)
Application Notes
Mobile pedestals to be used beneath249, 309 or 369 deep worksurfaces,credenzas, and return tops.
Mobile pedestals include lockingcasters.
Mobile pedestals will not fit undermachine height worksurfaces.
File drawers include file hangingbars.
Pedestals are available in paintedsteel and are offered with standardCalibre fronts only.
Actual dimensions are:
14 7/89W x 23 1/49D
Pedestal accessories, see page 101.
Calibre
100
Calibre Pedestal AccessoriesDrawer Inserts
description type pattern no. list price
File hanging bars CD1-FS $39.
Pencil tray black CD2PTN 49.
clear CD2PTC 57.
Drawer divider, box CD1-BD 39.
Drawer divider, file CD1-FD 40.
Stationery inserts, four trays, for box drawer CD1-ST 186.
Pedestal Lock Kit CD1LKKT 60.
Order Code Specification Information Application Notes
File hanging bars come in a set oftwo.
Pencil tray works n both personaland box drawer sizes.
Dimensions listed are actual (± 1/169).
Stationery inserts (four trays, for boxdrawer).
All accessories are finished inblack.
Pedestal lock kit includes allcomponents necessary to convert anon-locking pedestal to a lockingunit.
Calibre
101
Cal
ibre
Fron
tP
edes
tals
with
Indi
vidu
alLo
ckin
gD
raw
ers
Calibre Pedestal Accessoriespedestal cushionfabric
description w d h pattern no. ACOM
B C D E F G H I
Cushion 159 189 19 C1PAD18 ( ) $211. $247. $278. $294. $312. $344. $378. $427. $443.
159 249 19 C1PAD24 ( ) 264. 294. 344. 361. 391. 427. 476. 525. 544.
Order Code
Example: C1PAD24B-K124-9
C Calibre
1 Generation 1
PAD Cushion
24 249d
B Grade B
K124/9 Dristi Cumin
Specification Information
There is a $79 upcharge on CAL133backing on the cushion.
Consult page 17 for availablefabrics.
Pedestal cushions are upholstered(from the front to the back of thepedestal) with the fabric directionmatching the textile sample.
Application Notes
Pedestal cushions are for use onmobile pedestals without tops.
For Customers Own Material (COM)applications, specify .75 yards offabric for 17 inch deep mobilepedestal seat cushions, and .90yards for 23 inch deep seat cushion.
Calibre
102
Calibre Pedestal Accessoriespedestal cushionleather
description w d h pattern no.COM
U V W X Y
Cushion 159 189 19 C1PAD18 ( ) $412. $489. $606. $623. $654.
159 249 19 C1PAD24 ( ) 525. 623. 768. 806. 852.
Order Code
Example: C1PAD24B-K124-9
C Calibre
1 Generation 1
PAD Cushion
24 249d
B Grade B
K124/9 Dristi Cumin
Specification Information
There is a $108 upcharge forperforated leather.
Consult page 17 for availableleathers.
Application Notes
Pedestal cushions are for use onmobile pedestals without tops.
For Customers Own Leather (COL)applications, specify 11.5 sq. feet ofleather for 17 inch deep mobilepedestal seat cushions, and 14.5 sq.feet for 23 inch deep seat cushion.
Calibre
103
Cal
ibre
Fron
tP
edes
tals
with
Indi
vidu
alLo
ckin
gD
raw
ers
159 Wide Storage Towers
description type w d height lock pattern no. P1 P2 P3
429 High Side Access Bookcase tower with twofile drawers (right hand shown)
left hand 14 7/89 23 1/29 41 5/169 Y CT3SBLH4215FFL $1,430. $1,577. $1,654.
right hand 14 7/89 23 1/29 41 5/169 Y CT3SBRH4215FFL 1,430. 1,577. 1,654.
429 High Side Access Bookcase tower with twobox and one file drawer (right hand shown)
left hand 14 7/89 23 1/29 41 5/169 Y CT3SBLH4215BBFL 1,524. 1,681. 1,761.
right hand 14 7/89 23 1/29 41 5/169 Y CT3SBRH4215BBFL 1,524. 1,681. 1,761.
509 High Single Door tower with two file drawers(right hand shown)
left hand 14 7/89 23 1/29 48 5/169 Y CT3SLH5015FFL 1,582. 1,739. 1,827.
right hand 14 7/89 23 1/29 48 5/169 Y CT3SRH5015FFL 1,582. 1,739. 1,827.
Order Code
Example: CT3SBLH5715BBFL-111
CT3 Calibre Storage Tower
SB Side Access Bookcase
LH Left Hand Access
57 579 High
15 159 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
429, 509, 579 and 649 Tower InternalDimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
104
159 Wide Storage Towers
description type w d height lock pattern no. P1 P2 P3
509 High Single Door tower with two box and onefile drawer (right hand shown)
left hand 14 7/89 23 1/29 48 5/169 Y CT3SLH5015BBFL $1,773. $1,951. $2,050.
right hand 14 7/89 23 1/29 48 5/169 Y CT3SRH5015BBFL 1,773. 1,951. 2,050.
509 High Side Access Bookcase tower with twobox and one file drawer (right hand shown)
left hand 14 7/89 23 1/29 48 5/169 Y CT3SBLH5015BBFL 1,537. 1,688. 1,773.
right hand 14 7/89 23 1/29 48 5/169 Y CT3SBRH5015BBFL 1,537. 1,688. 1,773.
509 High Side Access Bookcase tower with twofile drawers (right hand shown)
left hand 14 7/89 23 1/29 48 5/169 Y CT3SBLH5015FFL 1,497. 1,647. 1,731.
right hand 14 7/89 23 1/29 48 5/169 Y CT3SBRH5015FFL 1,497. 1,647. 1,731.
Order Code
Example: CT3SBLH5715BBFL-111
CT3 Calibre Storage Tower
SB Side Access Bookcase
LH Left Hand Access
57 579 High
15 159 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
429, 509, 579 and 649 Tower InternalDimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
105
Cal
ibre
Fron
tS
tora
geTo
wer
s
159 Wide Storage Towers
description type w d height lock pattern no. P1 P2 P3
579 High Single Door tower with two file drawers(right hand shown)
left hand 14 7/89 23 1/29 56 3/169 Y CT3SLH5715FFL $1,655. $1,822. $1,913.
right hand 14 7/89 23 1/29 56 3/169 Y CT3SRH5715FFL 1,655. 1,822. 1,913.
579 High Single Door tower with two box and onefile drawer (right hand shown)
left hand 14 7/89 23 1/29 56 3/169 Y CT3SLH5715BBFL 1,850. 2,033. 2,136.
right hand 14 7/89 23 1/29 56 3/169 Y CT3SRH5715BBFL 1,850. 2,033. 2,136.
579 High Side Access Bookcase tower with twofile drawers (right hand shown)
left hand 14 7/89 23 1/29 56 3/169 Y CT3SBLH5715FFL 1,525. 1,681. 1,763.
right hand 14 7/89 23 1/29 56 3/169 Y CT3SBRH5715FFL 1,525. 1,681. 1,763.
Order Code
Example: CT3SBLH5715BBFL-111
CT3 Calibre Storage Tower
SB Side Access Bookcase
LH Left Hand Access
57 579 High
15 159 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
429, 509, 579 and 649 Tower InternalDimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
106
159 Wide Storage Towers
description type w d height lock pattern no. P1 P2 P3
579 High Side Access Bookcase tower with twobox and one file drawer (right hand shown)
left hand 14 7/89 23 1/29 56 3/169 Y CT3SBLH5715BBFL $1,594. $1,755. $1,846.
right hand 14 7/89 23 1/29 56 3/169 Y CT3SBRH5715BBFL 1,594. 1,755. 1,846.
649 High Single Door tower with two file drawers(right hand shown)
left hand 14 7/89 23 1/29 63 5/169 Y CT3SLH6415FFL 1,661. 1,828. 1,921.
right hand 14 7/89 23 1/29 63 5/169 Y CT3SRH6415FFL 1,661. 1,828. 1,921.
649 High Single Door tower with two box and onefile drawer (right hand shown)
left hand 14 7/89 23 1/29 63 5/169 Y CT3SLH6415BBFL 1,860. 2,047. 2,147.
right hand 14 7/89 23 1/29 63 5/169 Y CT3SRH6415BBFL 1,860. 2,047. 2,147.
Order Code
Example: CT3SBLH5715BBFL-111
CT3 Calibre Storage Tower
SB Side Access Bookcase
LH Left Hand Access
57 579 High
15 159 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
429, 509, 579 and 649 Tower InternalDimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
107
Cal
ibre
Fron
tS
tora
geTo
wer
s
159 Wide Storage Towers
description type w d height lock pattern no. P1 P2 P3
649 High Side Access Bookcase tower with twobox and one file drawer (right hand shown)
left hand 14 7/89 23 1/29 63 5/169 Y CT3SBLH6415BBFL $1,657. $1,826. $1,915.
right hand 14 7/89 23 1/29 63 5/169 Y CT3SBRH6415BBFL 1,657. 1,826. 1,915.
649 High Side Access Bookcase tower with twofile drawers (right hand shown)
left hand 14 7/89 23 1/29 63 5/169 Y CT3SBLH6415FFL 1,551. 1,707. 1,791.
right hand 14 7/89 23 1/29 63 5/169 Y CT3SBRH6415FFL 1,551. 1,707. 1,791.
649 High Display tower with two box and one filedrawer (right hand shown)
left hand 14 7/89 23 1/29 63 5/169 Y CT3BDLH6415BBFL 1,681. 1,848. 1,934.
right hand 14 7/89 23 1/29 63 5/169 Y CT3BDRH6415BBFL 1,681. 1,848. 1,934.
Order Code
Example: CT3SBLH5715BBFL-111
CT3 Calibre Storage Tower
SB Side Access Bookcase
LH Left Hand Access
57 579 High
15 159 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
429, 509, 579 and 649 Tower InternalDimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
108
159 Wide Storage Towers
description type w d height lock pattern no. P1 P2 P3
649 High Display tower with two file drawers(right hand shown)
left hand 14 7/89 23 1/29 63 5/169 Y CT3BDLH6415FFL $1,574. $1,730. $1,817.
right hand 14 7/89 23 1/29 63 5/169 Y CT3BDRH6415FFL 1,574. 1,730. 1,817.
Order Code
Example: CT3SBLH5715BBFL-111
CT3 Calibre Storage Tower
SB Side Access Bookcase
LH Left Hand Access
57 579 High
15 159 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
429, 509, 579 and 649 Tower InternalDimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
109
Cal
ibre
Fron
tS
tora
geTo
wer
s
249 Wide Storage Towers
description type w d h lock pattern no. P1 P2 P3
429 High Side Access Bookcase with two box, onefile drawer and wardrobe (left hand shown)
left hand 23 7/89 23 1/29 41 5/169 Y CT3WSBLH4224BBFL $2,168. $2,389. $2,507.
right hand 23 7/89 23 1/29 41 5/169 Y CT3WSBRH4224BBFL 2,168. 2,389. 2,507.
509 High tower with two file drawers and doorand wardrobe (left hand shown)
left hand 23 7/89 23 1/29 48 5/169 Y CT3WSLH5024FFL 1,954. 2,151. 2,256.
right hand 23 7/89 23 1/29 48 5/169 Y CT3WSRH5024FFL 1,954. 2,151. 2,256.
509 High tower with two box, one file drawer anddoor and wardrobe (left hand shown)
left hand 23 7/89 23 1/29 48 5/169 Y CT3WSLH5024BBFL 2,140. 2,353. 2,469.
right hand 23 7/89 23 1/29 48 5/169 Y CT3WSRH5024BBFL 2,140. 2,353. 2,469.
Order Code
Example: CT3SBLH5724BBFL-111
CT3 Calibre Storage Tower
SB Side Access Bookcase
LH Left Hand Access
57 649 High
24 249 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
249 Wide 509, 579 and 649 TowerInternal Dimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
110
249 Wide Storage Towers
description type w d h lock pattern no. P1 P2 P3
509 High Side Access Bookcase with two box, onefile drawer and wardrobe (left hand shown)
left hand 23 7/89 23 1/29 48 5/169 Y CT3WSBLH5024BBFL $2,188. $2,402. $2,522.
right hand 23 7/89 23 1/29 48 5/169 Y CT3WSBRH5024BBFL 2,188. 2,402. 2,522.
509 High Side Access Bookcase with two filedrawers and wardrobe (left hand shown)
left hand 23 7/89 23 1/29 48 5/169 Y CT3WSBLH5024FFL 2,078. 2,289. 2,400.
right hand 23 7/89 23 1/29 48 5/169 Y CT3WSBRH5024FFL 2,078. 2,289. 2,400.
579 High Side Access Bookcase with two filedrawers and wardrobe (left hand shown)
left hand 23 7/89 23 1/29 56 3/169 Y CT3WSBLH5724FFL 2,164. 2,382. 2,499.
right hand 23 7/89 23 1/29 56 3/169 Y CT3WSBRH5724FFL 2,164. 2,382. 2,499.
Order Code
Example: CT3SBLH5724BBFL-111
CT3 Calibre Storage Tower
SB Side Access Bookcase
LH Left Hand Access
57 649 High
24 249 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
249 Wide 509, 579 and 649 TowerInternal Dimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
111
Cal
ibre
Fron
tS
tora
geTo
wer
s
249 Wide Storage Towers
description type w d h lock pattern no. P1 P2 P3
579 High Side Access Bookcase with two box, onefile drawer and wardrobe (left hand shown)
left hand 23 7/89 23 1/29 56 3/169 Y CT3WSBLH5724BBFL $2,270. $2,499. $2,624.
right hand 23 7/89 23 1/29 56 3/169 Y CT3WSBRH5724BBFL 2,270. 2,499. 2,624.
649 High Display tower with two file drawers andwardrobe (left hand shown)
left hand 23 7/89 23 1/29 63 5/169 Y CT3WBDLH6424FFL 2,240. 2,460. 2,585.
right hand 23 7/89 23 1/29 63 5/169 Y CT3WBDRH6424FFL 2,240. 2,460. 2,585.
649 High Display tower with two box, one filedrawer and wardrobe (left hand shown)
left hand 23 7/89 23 1/29 63 5/169 Y CT3WBDLH6424BBFL 2,341. 2,573. 2,705.
right hand 23 7/89 23 1/29 63 5/169 Y CT3WBDRH6424BBFL 2,341. 2,573. 2,705.
Order Code
Example: CT3SBLH5724BBFL-111
CT3 Calibre Storage Tower
SB Side Access Bookcase
LH Left Hand Access
57 649 High
24 249 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
249 Wide 509, 579 and 649 TowerInternal Dimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
112
249 Wide Storage Towers
description type w d h lock pattern no. P1 P2 P3
579 High tower with two file drawers and doorand wardrobe (left hand shown)
left hand 23 7/89 23 1/29 56 3/169 Y CT3WSLH5724FFL $2,071. $2,279. $2,396.
right hand 23 7/89 23 1/29 56 3/169 Y CT3WSRH5724FFL 2,071. 2,279. 2,396.
579 High tower with two box, one file drawer anddoor and wardrobe (left hand shown)
left hand 23 7/89 23 1/29 56 3/169 Y CT3WSLH5724BBFL 2,263. 2,490. 2,615.
right hand 23 7/89 23 1/29 56 3/169 Y CT3WSRH5724BBFL 2,263. 2,490. 2,615.
649 High tower with two file drawers and doorand wardrobe (left hand shown)
left hand 23 7/89 23 1/29 63 5/169 Y CT3WSLH6424FFL 2,066. 2,275. 2,388.
right hand 23 7/89 23 1/29 63 5/169 Y CT3WSRH6424FFL 2,066. 2,275. 2,388.
Order Code
Example: CT3SBLH5724BBFL-111
CT3 Calibre Storage Tower
SB Side Access Bookcase
LH Left Hand Access
57 649 High
24 249 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
249 Wide 509, 579 and 649 TowerInternal Dimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
113
Cal
ibre
Fron
tS
tora
geTo
wer
s
249 Wide Storage Towers
description type w d h lock pattern no. P1 P2 P3
649 High tower with two box, one file drawer anddoor and wardrobe (left hand shown)
left hand 23 7/89 23 1/29 63 5/169 Y CT3WSLH6424BBFL $2,256. $2,483. $2,605.
right hand 23 7/89 23 1/29 63 5/169 Y CT3WSRH6424BBFL 2,256. 2,483. 2,605.
649 High Side Access Bookcase with two filedrawers and wardrobe (left hand shown)
left hand 23 7/89 23 1/29 63 5/169 Y CT3WSBLH6424FFL 2,212. 2,434. 2,557.
right hand 23 7/89 23 1/29 63 5/169 Y CT3WSBRH6424FFL 2,212. 2,434. 2,557.
Order Code
Example: CT3SBLH5724BBFL-111
CT3 Calibre Storage Tower
SB Side Access Bookcase
LH Left Hand Access
57 649 High
24 249 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
249 Wide 509, 579 and 649 TowerInternal Dimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
114
249 Wide Storage Towers
description type w d h lock pattern no. P1 P2 P3
649 High Side Access Bookcase with two box, onefile drawer and wardrobe (left hand shown)
left hand 23 7/89 23 1/29 63 5/169 Y CT3WSBLH6424BBFL $2,318. $2,553. $2,678.
right hand 23 7/89 23 1/29 63 5/169 Y CT3WSBRH6424BBFL 2,318. 2,553. 2,678.
429 High Side Access Bookcase with two filedrawers and wardrobe (left hand shown)
left hand 23 7/89 23 1/29 41 5/169 Y CT3WSBLH4224FFL 2,061. 2,270. 2,365.
right hand 23 7/89 23 1/29 41 5/169 Y CT3WSBRH4224FFL 2,061. 2,270. 2,365.
Order Code
Example: CT3SBLH5724BBFL-111
CT3 Calibre Storage Tower
SB Side Access Bookcase
LH Left Hand Access
57 649 High
24 249 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
249 Wide 509, 579 and 649 TowerInternal Dimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
115
Cal
ibre
Fron
tS
tora
geTo
wer
s
249 Wide Storage Towers
description type w d h lock pattern no. P1 P2 P3
509 High, tower with two box and one file drawerand door and wardrobe (Left hand shown)
left hand 23 7/89 23 1/29 48 5/169 Y CT3FWSLH5024BBFL $2,176. $2,391. $2,507.
right hand 23 7/89 23 1/29 48 5/169 Y CT3FWSRH5024BBFL 2,176. 2,391. 2,507.
509 High, tower with two file drawers anddoor and wardrobe (Left hand shown)
left hand 23 7/89 23 1/29 48 5/169 Y CT3FWSLH5024FFL 1,995. 2,192. 2,298.
right hand 23 7/89 23 1/29 48 5/169 Y CT3FWSRH5024FFL 1,995. 2,192. 2,298.
Order Code
Example: CT3SBLH5724BBFL-111
CT3 Calibre Storage Tower
SB Side Access Bookcase
LH Left Hand Access
57 649 High
24 249 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
249 Wide 509, 579 and 649 TowerInternal Dimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
116
249 Wide Storage Towers
description type w d h lock pattern no. P1 P2 P3
579 High, tower with two box and one file drawerand door and wardrobe (Left hand shown)
left hand 23 7/89 23 1/29 56 3/169 Y CT3FWSLH5724BBFL $2,303. $2,529. $2,652.
right hand 23 7/89 23 1/29 56 3/169 Y CT3FWSRH5724BBFL 2,303. 2,529. 2,652.
579 High, tower with two file drawers anddoor and wardrobe (Left hand shown)
left hand 23 7/89 23 1/29 56 3/169 Y CT3FWSLH5724FFL 2,112. 2,317. 2,434.
right hand 23 7/89 23 1/29 56 3/169 Y CT3FWSRH5724FFL 2,112. 2,317. 2,434.
Order Code
Example: CT3SBLH5724BBFL-111
CT3 Calibre Storage Tower
SB Side Access Bookcase
LH Left Hand Access
57 649 High
24 249 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
249 Wide 509, 579 and 649 TowerInternal Dimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
117
Cal
ibre
Fron
tS
tora
geTo
wer
s
249 Wide Storage Towers
description type w d h lock pattern no. P1 P2 P3
649 High, tower with two box and one file drawerand door and wardrobe (Left hand shown)
left hand 23 7/89 23 1/29 63 5/169 Y CT3FWSLH6424BBFL $2,298. $2,521. $2,644.
right hand 23 7/89 23 1/29 63 5/169 Y CT3FWSRH6424BBFL 2,298. 2,521. 2,644.
649 High, tower with two file drawers anddoor and wardrobe (Left hand shown)
left hand 23 7/89 23 1/29 63 5/169 Y CT3FWSLH6424FFL 2,107. 2,314. 2,427.
right hand 23 7/89 23 1/29 63 5/169 Y CT3FWSRH6424FFL 2,107. 2,314. 2,427.
Order Code
Example: CT3SBLH5724BBFL-111
CT3 Calibre Storage Tower
SB Side Access Bookcase
LH Left Hand Access
57 649 High
24 249 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
249 Wide 509, 579 and 649 TowerInternal Dimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
118
309 Wide Storage Towers
description type w d h pattern no. P1 P2 P3
579 High tower with two box, one file drawer anddoor and wardrobe (left hand shown)
left hand 29 7/89 23 1/29 56 3/169 CT3WSLH5730BBFL $2,218. $2,446. $2,569.
right hand 29 7/89 23 1/29 56 3/169 CT3WSRH5730BBFL 2,218. 2,446. 2,569.
649 High tower with two file drawers and doorand wardrobe (left hand shown)
left hand 29 7/89 23 1/29 63 5/169 CT3WSLH6430FFL 2,066. 2,275. 2,388.
right hand 29 7/89 23 1/29 63 5/169 CT3WSRH6430FFL 2,066. 2,275. 2,388.
579 High tower with two file drawers and doorand wardrobe (left hand shown)
left hand 29 7/89 23 1/29 56 3/169 CT3WSLH5730FFL 2,062. 2,268. 2,383.
right hand 29 7/89 23 1/29 56 3/169 CT3WSRH5730FFL 2,062. 2,268. 2,383.
Order Code
Example: CT3WSLH5730BBFL-111
CT3 Calibre Storage Tower
WS Wardobe and SingleDoor
LH Left Hand Access
57 509 High
30 309 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
249 Wide 509, 579 and 649 TowerInternal Dimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
119
Cal
ibre
Fron
tS
tora
geTo
wer
s
309 Wide Storage Towers
description type w d h pattern no. P1 P2 P3
649 High tower with two box, one file drawer anddoor and wardrobe (left hand shown)
left hand 29 7/89 23 1/29 63 5/169 CT3WSLH6430BBFL $2,214. $2,439. $2,563.
right hand 29 7/89 23 1/29 63 5/169 CT3WSRH6430BBFL 2,214. 2,439. 2,563.
509 High tower with two file drawers and doorand wardrobe (left hand shown)
left hand 29 7/89 23 1/29 48 5/169 CT3WSLH5030FFL 1,931. 2,124. 2,236.
right hand 29 7/89 23 1/29 48 5/169 CT3WSRH5030FFL 1,931. 2,124. 2,236.
509 High tower with two box, one file drawer anddoor and wardrobe (left hand shown)
left hand 29 7/89 23 1/29 48 5/169 CT3WSLH5030BBFL 2,102. 2,315. 2,431.
right hand 29 7/89 23 1/29 48 5/169 CT3WSRH5030BBFL 2,102. 2,315. 2,431.
Order Code
Example: CT3WSLH5730BBFL-111
CT3 Calibre Storage Tower
WS Wardobe and SingleDoor
LH Left Hand Access
57 509 High
30 309 Wide
B Box Drawer
B Box Drawer
F File Drawer
L Locking
111 Black paint finish
Specification Information
For non-locking towers, deduct asfollows from the list price for eachunit: Deduct $30 for (1) lock unit,$60 for a (2) lock unit, and $75 for a(3) lock unit. Substitute the ‘‘L’’suffix with an ‘‘N’’ within the patternnumber to designate a non-lockingunit, example (CT3SLH5015BBFN)
All Towers are standard with (1) fulldepth adjustable shelf, except the649 h side access display andbookcase towers which have (2) fulldepth adjustable shelves.
Application Notes
Hanging rails and other accessoriesare not included and must beordered separately. (See PedestalAccessories)
Half depth adjustable shelves andcoat hooks may be orderedseparately allowing the cupboardarea of 159, 249 and 309 wide towersto support binders as well as shortercoats. (See Tower Accessories)
159w Side Access and Displaytowers include (1) lock.
249w and 309w Side Access andDisplay towers include (2) locks.
Front Access (only) towers withwardrobe include (3) locks.
Critical Dimensions
Dimensions under w, d and h areactual to the nearest 1/169
249 Wide 509, 579 and 649 TowerInternal Dimensions
• Box drawer height: 4 5/169• Box drawer width: 12 1/169• Box drawer depth: 18 3/89• File drawer height: 9 1/49• File drawer width: 12 1/169• File drawer depth: 18 3/89
Note: All towers are configuredfrom the top down with standardcombinations of box and filedrawers.
Calibre
120
Calibre Tower Accessories
description type w d h pattern no. list P1 P2 P3
Pedestal Drawer Divider Kit (For use in Calibretower or Calibre pedestal box and file drawers aswell as Calibre lateral file drawers 69 or larger.Not intended for 39 drawers.)
DT3PDD $504.
File Drawer Divider Kit (For use with allCalibre/S2 front lateral file drawers with theexception of 39 high drawers)
DT3FDD 629.
Specification Information
DT3PDD Pedestal Drawer Dividersand DT3RTPedestal DrawerReference Tablets are supportedwith a black painted finishstandard.
Application Notes
The DT3PDD Pedestal DrawerDivider Kit is comprised of a seriesof magnetic fences that attach to thebottom of steel pedestal (Calibreand S2) pedestal drawer bodies tosupport space division. May also beused within S2 and Calibre TowerFile and Box drawers. Each kitcontains (4) 39 wide, (3) 69 wide, (2)99 wide and (2) 129 wide dividers.Dividers are constructed from steel.DT3PDD dividers are not designedto work with 39 high lateral file orpedestal drawers.
The DT3FDD File Drawer DividerKit is comprised of a series ofmagnetic fences that attach to thebottom of (Calibre/S2 Font) lateralfile drawer bodies to support spacedivision. Each kit contains (4) 39wide, (3) 69 wide, (2) 99 wide, (2)129 and (2) 159 dividers. Dividersare constructed from steel. DT3FDDdividers are not designed to workwith 39 high lateral file or pedestaldrawers.
The DT3SDD File Drawer DividerKit is comprised of a series ofmagnetic fences that attach to thebottom of (Calibre/S2 Font) lateralfile drawer bodies to support spacedivision. Each kit contains (4) 39wide, (3) 69 wide, (2) 99 wide, (2)129 and (2) 159 dividers. Dividersare constructed from steel. DT3SDDdividers are designed to work with39 high lateral file or pedestaldrawers.
Note: Worksurface Splice Plate Kitsare intended for use with SideAccess Bookcase and DisplayTowers only.
Note: 159 wide half depth shelvesare suitable for use with 159 widesingle door towers or within thewardobe portion of a 309 widewardrobe tower.
Note:249 wide half depth shelvesare suitable for use with 249 widesingle door towers or 249 widedouble door towers. 309 wide halfdepth shelves are suitable for use inwith 309 wide double door towersonly.
Calibre
121
Cal
ibre
Fron
tS
tora
geTo
wer
s
Calibre Tower Accessories
description type w d h pattern no. list P1 P2 P3
File Drawer Divider Kit for 39 high lateral filedrawers
DT3SDD $629.
Pencil tray black CD2-PTN 49.
clear CD2-PTC 57.
Reference Tablet with Plexi Glass Cover (For usewith Calibre/S2 pedestals and towers)
DT3RT 143.
Specification Information
DT3PDD Pedestal Drawer Dividersand DT3RTPedestal DrawerReference Tablets are supportedwith a black painted finishstandard.
Application Notes
The DT3PDD Pedestal DrawerDivider Kit is comprised of a seriesof magnetic fences that attach to thebottom of steel pedestal (Calibreand S2) pedestal drawer bodies tosupport space division. May also beused within S2 and Calibre TowerFile and Box drawers. Each kitcontains (4) 39 wide, (3) 69 wide, (2)99 wide and (2) 129 wide dividers.Dividers are constructed from steel.DT3PDD dividers are not designedto work with 39 high lateral file orpedestal drawers.
The DT3FDD File Drawer DividerKit is comprised of a series ofmagnetic fences that attach to thebottom of (Calibre/S2 Font) lateralfile drawer bodies to support spacedivision. Each kit contains (4) 39wide, (3) 69 wide, (2) 99 wide, (2)129 and (2) 159 dividers. Dividersare constructed from steel. DT3FDDdividers are not designed to workwith 39 high lateral file or pedestaldrawers.
The DT3SDD File Drawer DividerKit is comprised of a series ofmagnetic fences that attach to thebottom of (Calibre/S2 Font) lateralfile drawer bodies to support spacedivision. Each kit contains (4) 39wide, (3) 69 wide, (2) 99 wide, (2)129 and (2) 159 dividers. Dividersare constructed from steel. DT3SDDdividers are designed to work with39 high lateral file or pedestaldrawers.
Note: Worksurface Splice Plate Kitsare intended for use with SideAccess Bookcase and DisplayTowers only.
Note: 159 wide half depth shelvesare suitable for use with 159 widesingle door towers or within thewardobe portion of a 309 widewardrobe tower.
Note:249 wide half depth shelvesare suitable for use with 249 widesingle door towers or 249 widedouble door towers. 309 wide halfdepth shelves are suitable for use inwith 309 wide double door towersonly.
Calibre
122
Calibre Tower Accessories
description type w d h pattern no. list P1 P2 P3
159 Wide Half Depth Shelf (black only) Half Depth 159 129 3/49 DT3HDS15 $171.
249 Wide Half Depth Shelf (black only) Half Depth 249 129 3/49 DT3HDS24 183.
309 Wide Half Depth Shelf (black only) Half Depth 309 129 3/49 DT3HDS30 217.
159 Wide Full Depth Shelf (black only) Full Depth 159 22 3/89 19 DT3FDS15 123.
249 Wide Full Depth Shelf (black only) Full Depth 249 22 3/89 19 DT3FDS24 134.
Specification Information
DT3PDD Pedestal Drawer Dividersand DT3RTPedestal DrawerReference Tablets are supportedwith a black painted finishstandard.
Application Notes
The DT3PDD Pedestal DrawerDivider Kit is comprised of a seriesof magnetic fences that attach to thebottom of steel pedestal (Calibreand S2) pedestal drawer bodies tosupport space division. May also beused within S2 and Calibre TowerFile and Box drawers. Each kitcontains (4) 39 wide, (3) 69 wide, (2)99 wide and (2) 129 wide dividers.Dividers are constructed from steel.DT3PDD dividers are not designedto work with 39 high lateral file orpedestal drawers.
The DT3FDD File Drawer DividerKit is comprised of a series ofmagnetic fences that attach to thebottom of (Calibre/S2 Font) lateralfile drawer bodies to support spacedivision. Each kit contains (4) 39wide, (3) 69 wide, (2) 99 wide, (2)129 and (2) 159 dividers. Dividersare constructed from steel. DT3FDDdividers are not designed to workwith 39 high lateral file or pedestaldrawers.
The DT3SDD File Drawer DividerKit is comprised of a series ofmagnetic fences that attach to thebottom of (Calibre/S2 Font) lateralfile drawer bodies to support spacedivision. Each kit contains (4) 39wide, (3) 69 wide, (2) 99 wide, (2)129 and (2) 159 dividers. Dividersare constructed from steel. DT3SDDdividers are designed to work with39 high lateral file or pedestaldrawers.
Note: Worksurface Splice Plate Kitsare intended for use with SideAccess Bookcase and DisplayTowers only.
Note: 159 wide half depth shelvesare suitable for use with 159 widesingle door towers or within thewardobe portion of a 309 widewardrobe tower.
Note:249 wide half depth shelvesare suitable for use with 249 widesingle door towers or 249 widedouble door towers. 309 wide halfdepth shelves are suitable for use inwith 309 wide double door towersonly.
Calibre
123
Cal
ibre
Fron
tS
tora
geTo
wer
s
Calibre Tower Accessories
description type w d h pattern no. list P1 P2 P3
309 Wide Full Depth Shelf (black only) Full Depth 309 22 3/89 19 DT3FDS30 $141.
Glass Shelf for Side Access Bookcase andDisplay Tower
Qty 2 shelves DT3GBCDS 536.
Metal Shelf for Side Access Bookcase andDisplay Towers
Qty 2 Shelves DT3MBCDS 281. 306. 323.
Worksurface Splice Plate Kit for Display and SideAccess Bookcase Towers
DT3WSP 187. 205. 219.
Specification Information
DT3PDD Pedestal Drawer Dividersand DT3RTPedestal DrawerReference Tablets are supportedwith a black painted finishstandard.
Application Notes
The DT3PDD Pedestal DrawerDivider Kit is comprised of a seriesof magnetic fences that attach to thebottom of steel pedestal (Calibreand S2) pedestal drawer bodies tosupport space division. May also beused within S2 and Calibre TowerFile and Box drawers. Each kitcontains (4) 39 wide, (3) 69 wide, (2)99 wide and (2) 129 wide dividers.Dividers are constructed from steel.DT3PDD dividers are not designedto work with 39 high lateral file orpedestal drawers.
The DT3FDD File Drawer DividerKit is comprised of a series ofmagnetic fences that attach to thebottom of (Calibre/S2 Font) lateralfile drawer bodies to support spacedivision. Each kit contains (4) 39wide, (3) 69 wide, (2) 99 wide, (2)129 and (2) 159 dividers. Dividersare constructed from steel. DT3FDDdividers are not designed to workwith 39 high lateral file or pedestaldrawers.
The DT3SDD File Drawer DividerKit is comprised of a series ofmagnetic fences that attach to thebottom of (Calibre/S2 Font) lateralfile drawer bodies to support spacedivision. Each kit contains (4) 39wide, (3) 69 wide, (2) 99 wide, (2)129 and (2) 159 dividers. Dividersare constructed from steel. DT3SDDdividers are designed to work with39 high lateral file or pedestaldrawers.
Note: Worksurface Splice Plate Kitsare intended for use with SideAccess Bookcase and DisplayTowers only.
Note: 159 wide half depth shelvesare suitable for use with 159 widesingle door towers or within thewardobe portion of a 309 widewardrobe tower.
Note:249 wide half depth shelvesare suitable for use with 249 widesingle door towers or 249 widedouble door towers. 309 wide halfdepth shelves are suitable for use inwith 309 wide double door towersonly.
Calibre
124
Calibre Tower Accessories
description type w d h pattern no. list P1 P2 P3
Coat bar kit for 99 wide wardrobe DT3CB9 $164.
Coat Bar Kit for 159 wide single door or 159 widewardrobe
DT3CB15 169.
Coat Bar for 249 wide single and double doortowers
DT3CB24 183.
Specification Information
DT3PDD Pedestal Drawer Dividersand DT3RTPedestal DrawerReference Tablets are supportedwith a black painted finishstandard.
Application Notes
The DT3PDD Pedestal DrawerDivider Kit is comprised of a seriesof magnetic fences that attach to thebottom of steel pedestal (Calibreand S2) pedestal drawer bodies tosupport space division. May also beused within S2 and Calibre TowerFile and Box drawers. Each kitcontains (4) 39 wide, (3) 69 wide, (2)99 wide and (2) 129 wide dividers.Dividers are constructed from steel.DT3PDD dividers are not designedto work with 39 high lateral file orpedestal drawers.
The DT3FDD File Drawer DividerKit is comprised of a series ofmagnetic fences that attach to thebottom of (Calibre/S2 Font) lateralfile drawer bodies to support spacedivision. Each kit contains (4) 39wide, (3) 69 wide, (2) 99 wide, (2)129 and (2) 159 dividers. Dividersare constructed from steel. DT3FDDdividers are not designed to workwith 39 high lateral file or pedestaldrawers.
The DT3SDD File Drawer DividerKit is comprised of a series ofmagnetic fences that attach to thebottom of (Calibre/S2 Font) lateralfile drawer bodies to support spacedivision. Each kit contains (4) 39wide, (3) 69 wide, (2) 99 wide, (2)129 and (2) 159 dividers. Dividersare constructed from steel. DT3SDDdividers are designed to work with39 high lateral file or pedestaldrawers.
Note: Worksurface Splice Plate Kitsare intended for use with SideAccess Bookcase and DisplayTowers only.
Note: 159 wide half depth shelvesare suitable for use with 159 widesingle door towers or within thewardobe portion of a 309 widewardrobe tower.
Note:249 wide half depth shelvesare suitable for use with 249 widesingle door towers or 249 widedouble door towers. 309 wide halfdepth shelves are suitable for use inwith 309 wide double door towersonly.
Calibre
125
Cal
ibre
Fron
tS
tora
geTo
wer
s
Calibre Tower Accessories
description type w d h pattern no. list P1 P2 P3
Coat Bar for 309 wide double door towers DT3CB30 $197.
Drop Down Coat Hook for use in towers without astandard wardrobe
DT3DCH 107.
Floor Cover for 99 Wide Wardrobe DT3FM9 79.
Specification Information
DT3PDD Pedestal Drawer Dividersand DT3RTPedestal DrawerReference Tablets are supportedwith a black painted finishstandard.
Application Notes
The DT3PDD Pedestal DrawerDivider Kit is comprised of a seriesof magnetic fences that attach to thebottom of steel pedestal (Calibreand S2) pedestal drawer bodies tosupport space division. May also beused within S2 and Calibre TowerFile and Box drawers. Each kitcontains (4) 39 wide, (3) 69 wide, (2)99 wide and (2) 129 wide dividers.Dividers are constructed from steel.DT3PDD dividers are not designedto work with 39 high lateral file orpedestal drawers.
The DT3FDD File Drawer DividerKit is comprised of a series ofmagnetic fences that attach to thebottom of (Calibre/S2 Font) lateralfile drawer bodies to support spacedivision. Each kit contains (4) 39wide, (3) 69 wide, (2) 99 wide, (2)129 and (2) 159 dividers. Dividersare constructed from steel. DT3FDDdividers are not designed to workwith 39 high lateral file or pedestaldrawers.
The DT3SDD File Drawer DividerKit is comprised of a series ofmagnetic fences that attach to thebottom of (Calibre/S2 Font) lateralfile drawer bodies to support spacedivision. Each kit contains (4) 39wide, (3) 69 wide, (2) 99 wide, (2)129 and (2) 159 dividers. Dividersare constructed from steel. DT3SDDdividers are designed to work with39 high lateral file or pedestaldrawers.
Note: Worksurface Splice Plate Kitsare intended for use with SideAccess Bookcase and DisplayTowers only.
Note: 159 wide half depth shelvesare suitable for use with 159 widesingle door towers or within thewardobe portion of a 309 widewardrobe tower.
Note:249 wide half depth shelvesare suitable for use with 249 widesingle door towers or 249 widedouble door towers. 309 wide halfdepth shelves are suitable for use inwith 309 wide double door towersonly.
Calibre
126
Calibre Tower Accessories
description type w d h pattern no. list P1 P2 P3
Floor Cover for 159 Wide Wardrobe DT3FM15 $95.
Specification Information
DT3PDD Pedestal Drawer Dividersand DT3RTPedestal DrawerReference Tablets are supportedwith a black painted finishstandard.
Application Notes
The DT3PDD Pedestal DrawerDivider Kit is comprised of a seriesof magnetic fences that attach to thebottom of steel pedestal (Calibreand S2) pedestal drawer bodies tosupport space division. May also beused within S2 and Calibre TowerFile and Box drawers. Each kitcontains (4) 39 wide, (3) 69 wide, (2)99 wide and (2) 129 wide dividers.Dividers are constructed from steel.DT3PDD dividers are not designedto work with 39 high lateral file orpedestal drawers.
The DT3FDD File Drawer DividerKit is comprised of a series ofmagnetic fences that attach to thebottom of (Calibre/S2 Font) lateralfile drawer bodies to support spacedivision. Each kit contains (4) 39wide, (3) 69 wide, (2) 99 wide, (2)129 and (2) 159 dividers. Dividersare constructed from steel. DT3FDDdividers are not designed to workwith 39 high lateral file or pedestaldrawers.
The DT3SDD File Drawer DividerKit is comprised of a series ofmagnetic fences that attach to thebottom of (Calibre/S2 Font) lateralfile drawer bodies to support spacedivision. Each kit contains (4) 39wide, (3) 69 wide, (2) 99 wide, (2)129 and (2) 159 dividers. Dividersare constructed from steel. DT3SDDdividers are designed to work with39 high lateral file or pedestaldrawers.
Note: Worksurface Splice Plate Kitsare intended for use with SideAccess Bookcase and DisplayTowers only.
Note: 159 wide half depth shelvesare suitable for use with 159 widesingle door towers or within thewardobe portion of a 309 widewardrobe tower.
Note:249 wide half depth shelvesare suitable for use with 249 widesingle door towers or 249 widedouble door towers. 309 wide halfdepth shelves are suitable for use inwith 309 wide double door towersonly.
Calibre
127
Cal
ibre
Fron
tS
tora
geTo
wer
s
Wall Mounting Suggestions
The following information is provided only as a guide, and represents minimum
recommendations only. Knoll does not accept responsibility for the attachment of any Knoll
product to a Customer’s site wall. Wall specification/construction is the responsibility of the
Customer and its structural engineer/architect. Failure to properly attach Knoll products
to adequate wall structures can lead to property damage and/or personal injury.
You should consult your own structural engineers and/or architects
and must not rely on the information provided herein.
It is the responsibility of the Customer and its structural engineers/architects to verify
that the permanent structural walls (studs, blocks, solid masonry, etc.) on which the
Knoll products are intended to be mounted are designed appropriately to support
the product weight, PLUS 3 lbs. per linear inch for each useable shelf length
NOTE: A cabinet’s top is considered a “useable shelf” and MUST be
included in the calculation of the total load for an overhead cabinet.
It is the responsibility of the Customer and its structural engineer/architects to specify the
fasteners and method for attaching the Knoll supplied wall mounting cleat, bracket, frame, etc.
to the supporting wall and to confirm that the installers have adhered to these specifications.
For all local building standards and codes, and additional requirements (including, but not
limited to, seismic conditions) the Customer should always consult local code agencies.
Wall Mounting of Knoll Products Calibre
128
NEW CONSTRUCTION
Cinder Block or Poured Concrete Masonry Wall
Wood Stud Wall, the studs being FULL HEIGHT to the roof/floor above
Wood Stud Wall, the studs being only Ceiling Height
Steel Stud Wall, the studs being FULL HEIGHT to the roof/floor above
Steel Stud Wall, the studs being only Ceiling Height
Stud Specification
Wood studs, grade #2 or better, 3 1/2" minimum width, OR Metal studs, minimum 25 gage thickness, 3 5/8" minimum width
The wall must be a minimum of 6" thick, and must be full height to the roof/floor structure above
Wood studs must be Grade #2, or better, 3 1/2" minimum width
Wood studs must be Grade #2, or better, 3 1/2" minimum width
Metal studs must be minimum 25 gage thickness, 3 5/8" minimum width
Metal studs must be minimum 25 gage thickness, 3 5/8" minimum width
Stud Centers
Metal and wood studs must be spaced at 16" c/c maximum
N/A Wood studs must be spaced at 16" c/c maximum
Wood studs must be spaced at 16"" c/c maximum"
Metal studs must be spaced at 16" c/c maximum
Metal studs must be spaced at 16" c/c maximum
Stud Height
Metal and wood studs must extend upwards, and be securely attached to the roof/floor structure above
Wood studs must be braced above the ceiling, and be securely attached to the roof/floor structure above
Affix #2 grade 'cap' across the top of the studs, then place diagonal studs from the top cap up to underside of the roof/floor structure above
Metal studs must be braced above the ceiling, and be securely attached to the roof/floor structure above
Affix metal bracing 'cap' across the top of the studs, then place diagonal studs from the top cap up to underside of the roof / floor structure above
Mounting the Knoll Supplied Cleat, Bracket, Frame, etc*
Insert a 2" X 6" wood block, #2 grade or better, [or a DanbackTM flexible wood backing system] horizontally between each of the studs to accommodate the full width of the cabinet, and beyond to the next stud.
Fasten the wood block to each stud using three screws at the ends of each block. (Fasten the Danback™ as directed by the manufacturer)
Fasten the Knoll supplied wall mounting cleat, bracket, frame, etc directly to each wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
Fasten the Knoll supplied cabinet wall mounting cleat, bracket, frame, etc. directly to the masonry wall every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wall every 6", and fasten the lower horizontal element to the wall every 16"
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, [or a Danback™ flexible wood backing system] horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, [or a Danback™ flexible wood backing system] horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
*Graham Wall Hung Shelf
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
Fasten the Knoll supplied wall mounting brackets directly to the masonry wall, using the holes provided in each bracket
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
Fasten the Knoll supplied wall cleat with...
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
3/16" x 3 1/2" Tapcon Masonry Screws or equiv. @ 6" c/c with
1-1/4" embedment, screwed directly into the masonry wall
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
EXISTING CONSTRUCTION
Wall Mounting of Knoll Products Calibre
129
pattern no. page
3B18C05 78
3B18C06 78
3B18C07 78
3B18C10 78
3B18E05 78
3B18E06 78
3B18E07 78
3B18E10 78
3B18W05 96
3B18W07 96
3B18X05 96
3B18X07 96
3B24C05 79
3B24C06 79
3B24C07 79
3B24C08 79
3B24C10 80
3B24E05 79
3B24E06 79
3B24E07 79
3B24E08 79
3B24E10 80
3B24W05 96
3B24W07 96
3B24X05 96
3B24X07 96
3B30C05 82
3B30C06 82
3B30C07 82
3B30C10 82
3B30E05 82
3B30E06 82
3B30E07 82
3B30E10 82
3B30W05 96
3B30W07 96
3B30X05 96
3B30X07 96
3C18C01 84
3C18C05 84
3C18C07 84
3C18CP01 85
3C18CP05 85
3C18CP07 85
3C18W01 97
3C18W05 97
3C18W07 97
3C18WP01 98
3C18WP05 98
3C18WP07 98
3C18X01 97
3C18X05 97
3C18X07 97
3C18XP01 98
3C18XP05 98
3C18XP07 98
3C24C01 88
3C24C05 88
3C24C06 88
3C24C07 88
3C24C08 89
pattern no. page
3C24C09 89
3C24CP01 90
3C24CP05 90
3C24CP06 90
3C24CP07 91
3C24CP08 91
3C24CP09 91
3C24W01 97
3C24W05 97
3C24W07 97
3C24WP01 98
3C24WP05 98
3C24WP07 98
3C24X01 97
3C24X05 97
3C24X07 97
3C24XP01 98
3C24XP05 98
3C24XP07 98
3DW4CC 83
3DW4IDD 83
3DW6CC 83
3DW6IDD 83
3O18C01 86
3O18C05 86
3O18C07 86
3O18CP01 87
3O18CP05 87
3O18CP07 87
3O18W01 99
3O18W05 99
3O18W07 99
3O18WP01 100
3O18WP05 100
3O18WP07 100
3O18X01 99
3O18X05 99
3O18X07 99
3O18XP01 100
3O18XP05 100
3O18XP07 100
3O24C01 92
3O24C05 92
3O24C06 92
3O24C07 93
3O24C08 93
3O24C09 93
3O24CP01 94
3O24CP05 94
3O24CP06 94
3O24CP07 95
3O24CP08 95
3O24CP09 95
3O24W01 99
3O24W05 99
3O24W07 99
3O24WP01 100
3O24WP05 100
3O24WP07 100
3O24X01 99
3O24X05 99
pattern no. page
3O24X07 99
3O24XP01 100
3O24XP05 100
3O24XP07 100
5Z4C2AS 76
5Z4C2NM 76
5Z4C2NR 77
5Z4N2P 77
5Z4NB 76
5Z4NN 77
5Z6C2AS 76
5Z6C2NM 76
5Z6C2NR 77
5Z6N2P 77
5Z6NB 76
5Z8C2NM 76
5Z8N2P 77
5Z8NB 76
5ZAC2AS 76
5ZAC2NR 77
5ZCC2AS 76
5ZCC2NR 77
5ZNNE 77
5ZNNF 76
5ZNNL 76
A 64
B 64
C 64
C1PAD18 102, 103
C1PAD24 102, 103
C2C2730 41
C2C2730C 41
C2C2730E 41
C2C2736 41
C2C2736C 41
C2C2736E 41
C2C3430 42
C2C3430C 42
C2C3430E 42
C2C3436 42
C2C3436C 42
C2C3436E 42
C2C3930 43
C2C3930C 43
C2C3930E 43
C2C3936 43
C2C3936C 43
C2C3936E 43
C2C5130 44
C2C5130C 44
C2C5130E 44
C2C5136 44
C2C5136C 44
C2C5136E 44
C2C5530 45
C2C5530C 45
C2C5530E 45
C2C5536 45
C2C5536C 45
C2C5536E 45
C2C6330 46
pattern no. page
C2C6330C 46
C2C6330E 46
C2C6336 46
C2C6336C 46
C2C6336E 46
C2C6430 47
C2C6430C 47
C2C6430E 47
C2C6436 47
C2C6436C 47
C2C6436E 47
C2F2730C 62
C2F2730CCC 19
C2F2730CIDD 20
C2F2730CMD 20
C2F2730CZZ 19
C2F2730ECC 19
C2F2730EIDD 20
C2F2730EMD 20
C2F2730EZZ 19
C2F2730WCC 69
C2F2730XCC 69
C2F2736C 62
C2F2736CCC 19
C2F2736CIDD 20
C2F2736CMD 20
C2F2736CZZ 19
C2F2736ECC 19
C2F2736EIDD 20
C2F2736EMD 20
C2F2736EZZ 19
C2F2736WCC 69
C2F2736XCC 69
C2F2742C 62
C2F2742CCC 19
C2F2742CIDD 20
C2F2742CMD 20
C2F2742CZZ 19
C2F2742ECC 19
C2F2742EIDD 20
C2F2742EMD 20
C2F2742EZZ 19
C2F2742WCC 69
C2F2742XCC 69
C2F3430C 62
C2F3430CDDD 21
C2F3430EDDD 21
C2F3436C 62
C2F3436CDDD 21
C2F3436EDDD 21
C2F3442C 62
C2F3442CDDD 21
C2F3442EDDD 21
C2F3930C 62
C2F3930CCCC 22
C2F3930CLDD 22
C2F3930CMCD 23
C2F3930CZZZ 22
C2F3930ECCC 22
C2F3930ELDD 22
C2F3930EMCD 23
Alpha-Numeric Index
130
pattern no. page
C2F3930EZZZ 22
C2F3930WCCC 70
C2F3930XCCC 70
C2F3936C 62
C2F3936CCCC 22
C2F3936CLDD 22
C2F3936CMCD 23
C2F3936CZZZ 22
C2F3936ECCC 22
C2F3936ELDD 22
C2F3936EMCD 23
C2F3936EZZZ 22
C2F3936WCCC 70
C2F3936XCCC 70
C2F3942C 62
C2F3942CCCC 22
C2F3942CLDD 22
C2F3942CMCD 23
C2F3942CZZZ 22
C2F3942ECCC 22
C2F3942ELDD 22
C2F3942EMCD 23
C2F3942EZZZ 22
C2F3942WCCC 70
C2F3942XCCC 70
C2F4530C 62
C2F4530CDDDD 24
C2F4530CMKMM 24
C2F4530EDDDD 24
C2F4530EMKMM 24
C2F4536C 62
C2F4536CDDDD 24
C2F4536CMKMM 24
C2F4536EDDDD 24
C2F4536EMKMM 24
C2F4542C 62
C2F4542CDDDD 24
C2F4542CMKMM 24
C2F4542EDDDD 24
C2F4542EMKMM 24
C2F5130C 62
C2F5130CCCCC 25
C2F5130CDKCCC 26
C2F5130CLKDDD 26
C2F5130CMKCDD 26
C2F5130CMMDD 25
C2F5130CZZZZ 25
C2F5130ECCCC 25
C2F5130EDKCCC 26
C2F5130ELKDDD 26
C2F5130EMKCDD 26
C2F5130EMMDD 25
C2F5130EZZZZ 25
C2F5130WCCCC 71
C2F5130XCCCC 71
C2F5136C 62
C2F5136CCCCC 25
C2F5136CDKCCC 26
C2F5136CLKDDD 26
C2F5136CMKCDD 26
C2F5136CMMDD 25
C2F5136CZZZZ 25
C2F5136ECCCC 25
C2F5136EDKCCC 26
C2F5136ELKDDD 26
pattern no. page
C2F5136EMKCDD 26
C2F5136EMMDD 25
C2F5136EZZZZ 25
C2F5136WCCCC 71
C2F5136XCCCC 71
C2F5142C 62
C2F5142CCCCC 25
C2F5142CDKCCC 26
C2F5142CLKDDD 26
C2F5142CMKCDD 26
C2F5142CMMDD 25
C2F5142CZZZZ 25
C2F5142ECCCC 25
C2F5142EDKCCC 26
C2F5142ELKDDD 26
C2F5142EMKCDD 26
C2F5142EMMDD 25
C2F5142EZZZZ 25
C2F5142WCCCC 71
C2F5142XCCCC 71
C2F5430C 62
C2F5430CLCCC 27
C2F5430CMKCCC 27
C2F5430CMMCC 27
C2F5430ELCCC 27
C2F5430EMKCCC 27
C2F5430EMMCC 27
C2F5436C 62
C2F5436CLCCC 27
C2F5436CMKCCC 27
C2F5436CMMCC 27
C2F5436ELCCC 27
C2F5436EMKCCC 27
C2F5436EMMCC 27
C2F5442C 62
C2F5442CLCCC 27
C2F5442CMKCCC 27
C2F5442CMMCC 27
C2F5442ELCCC 27
C2F5442EMKCCC 27
C2F5442EMMCC 27
C2F5530C 63
C2F5530CDDDDD 28
C2F5530CLKCCC 28
C2F5530CMMKCC 28
C2F5530EDDDDD 28
C2F5530ELKCCC 28
C2F5530EMMKCC 28
C2F5536C 63
C2F5536CDDDDD 28
C2F5536CLKCCC 28
C2F5536CMMKCC 28
C2F5536EDDDDD 28
C2F5536ELKCCC 28
C2F5536EMMKCC 28
C2F5542C 63
C2F5542CDDDDD 28
C2F5542CLKCCC 28
C2F5542CMMKCC 28
C2F5542EDDDDD 28
C2F5542ELKCCC 28
C2F5542EMMKCC 28
C2F5830C 63
C2F5830CAAKCC 30
C2F5830CCDKDDD 29
pattern no. page
C2F5830CDDDCC 30
C2F5830CMDDDD 29
C2F5830CMKMMM 29
C2F5830EAAKCC 30
C2F5830ECDKDDD 29
C2F5830EDDDCC 30
C2F5830EMDDDD 29
C2F5830EMKMMM 29
C2F5836C 63
C2F5836CAAKCC 30
C2F5836CCDKDDD 29
C2F5836CDDDCC 30
C2F5836CMDDDD 29
C2F5836CMKMMM 29
C2F5836EAAKCC 30
C2F5836ECDKDDD 29
C2F5836EDDDCC 30
C2F5836EMDDDD 29
C2F5836EMKMMM 29
C2F5842C 63
C2F5842CAAKCC 30
C2F5842CCDKDDD 29
C2F5842CDDDCC 30
C2F5842CMDDDD 29
C2F5842CMKMMM 29
C2F5842EAAKCC 30
C2F5842ECDKDDD 29
C2F5842EDDDCC 30
C2F5842EMDDDD 29
C2F5842EMKMMM 29
C2F6330C 63
C2F6330CLAAA 32
C2F6330CLLLL 33
C2F6330CMDCCC 33
C2F6330CMMKDDD 34
C2F6330CNCCCC 34
C2F6330CNNNNN 31
C2F6330CZCCCC 31
C2F6330CZZZZZ 32
C2F6330ELAAA 32
C2F6330ELLLL 33
C2F6330EMDCCC 33
C2F6330EMMKDDD 34
C2F6330ENCCCC 34
C2F6330ENNNNN 31
C2F6330EZCCCC 31
C2F6330EZZZZZ 32
C2F6330WZCCCC 72
C2F6330XZCCCC 72
C2F6336C 63
C2F6336CLAAA 32
C2F6336CLLLL 33
C2F6336CMDCCC 33
C2F6336CMMKDDD 34
C2F6336CNCCCC 34
C2F6336CNNNNN 31
C2F6336CZCCCC 31
C2F6336CZZZZZ 32
C2F6336ELAAA 32
C2F6336ELLLL 33
C2F6336EMDCCC 33
C2F6336EMMKDDD 34
C2F6336ENCCCC 34
C2F6336ENNNNN 31
C2F6336EZCCCC 31
pattern no. page
C2F6336EZZZZZ 32
C2F6336WZCCCC 72
C2F6336XZCCCC 72
C2F6342C 63
C2F6342CLAAA 32
C2F6342CLLLL 33
C2F6342CMDCCC 33
C2F6342CMMKDDD 34
C2F6342CNCCCC 34
C2F6342CNNNNN 31
C2F6342CZCCCC 31
C2F6342CZZZZZ 32
C2F6342ELAAA 32
C2F6342ELLLL 33
C2F6342EMDCCC 33
C2F6342EMMKDDD 34
C2F6342ENCCCC 34
C2F6342ENNNNN 31
C2F6342EZCCCC 31
C2F6342EZZZZZ 32
C2F6342WZCCCC 72
C2F6342XZCCCC 72
C2F6430C 63
C2F6430CLLDDD 37
C2F6430CMCCCC 35
C2F6430CMMMDD 37
C2F6430CNCKCCC 35
C2F6430CNNKNNN 36
C2F6430CZZKZZZ 36
C2F6430ELLDDD 37
C2F6430EMCCCC 35
C2F6430EMMMDD 37
C2F6430ENCKCCC 35
C2F6430ENNKNNN 36
C2F6430EZZKZZZ 36
C2F6436C 63
C2F6436CLLDDD 37
C2F6436CMCCCC 35
C2F6436CMMMDD 37
C2F6436CNCKCCC 35
C2F6436CNNKNNN 36
C2F6436CZZKZZZ 36
C2F6436ELLDDD 37
C2F6436EMCCCC 35
C2F6436EMMMDD 37
C2F6436ENCKCCC 35
C2F6436ENNKNNN 36
C2F6436EZZKZZZ 36
C2F6442C 63
C2F6442CLLDDD 37
C2F6442CMCCCC 35
C2F6442CMMMDD 37
C2F6442CNCKCCC 35
C2F6442CNNKNNN 36
C2F6442CZZKZZZ 36
C2F6442ELLDDD 37
C2F6442EMCCCC 35
C2F6442EMMMDD 37
C2F6442ENCKCCC 35
C2F6442ENNKNNN 36
C2F6442EZZKZZZ 36
C2FL2730CCC 74
C2FL2730ECC 74
C2FL2736CCC 74
C2FL2736ECC 74
Calibre
131
pattern no. page
C2FL2742CCC 74
C2FL2742ECC 74
C2FL3930CCCC 74
C2FL3930ECCC 74
C2FL3936CCCC 74
C2FL3936ECCC 74
C2FL3942CCCC 74
C2FL3942ECCC 74
C2FL5130CCCCC 74
C2FL5130ECCCC 74
C2FL5136CCCCC 74
C2FL5136ECCCC 74
C2FL5142CCCCC 74
C2FL5142ECCCC 74
C2H5530CVDDD 38
C2H5530CXDD 38
C2H5530EVDDD 38
C2H5530EXDD 38
C2H5536CVDDD 38
C2H5536CXDD 38
C2H5536EVDDD 38
C2H5536EXDD 38
C2H6330C 63
C2H6330CRCCC 39
C2H6330CTCC 39
C2H6330ERCCC 39
C2H6330ETCC 39
C2H6330WRCCC 72
C2H6330WTCC 72
C2H6330XRCCC 72
C2H6330XTCC 72
C2H6336C 63
C2H6336CRCCC 39
C2H6336CTCC 39
C2H6336ERCCC 39
C2H6336ETCC 39
C2H6336WRCCC 72
C2H6336WTCC 72
C2H6336XRCCC 72
C2H6336XTCC 72
C2H6430C 63
C2H6430CSCCC 40
C2H6430CUCC 40
C2H6430ESCCC 40
C2H6430EUCC 40
C2H6430WSCCC 73
C2H6430WUCC 73
C2H6430XSCCC 73
C2H6430XUCC 73
C2H6436C 63
C2H6436CSCCC 40
C2H6436CUCC 40
C2H6436ESCCC 40
C2H6436EUCC 40
C2H6436WSCCC 73
C2H6436WUCC 73
C2H6436XSCCC 73
C2H6436XUCC 73
C2S2730E 54
C2S2736E 54
C2S2742E 54
C2S3030E 54
C2S3036E 54
C2S3042E 54
C4B2723NS 55
pattern no. page
C4B2729NS 55
C4B3024(N/S/L/V)S 55
C4B3030(N/S/L/V)S 55
C4B3036(N/S/L/V)S 55
C4B3042(N/S/L/V)S 55
C4B3048(N/S/L/V)S 55
C4B3054(N/S/L/V)S 55
C4B3060(N/S/L/V)S 55
C4B3066(N/S/L/V)S 55
C4B3072(N/S/L/V)S 55
C4B3078(N/S/L/V)S 55
C4B3084(N/S/L/V)S 55
C4B3924(N/S/L/V)S 55
C4B3930(N/S/L/V)S 55
C4B3936(N/S/L/V)S 55
C4B3942(N/S/L/V)S 55
C4B3948(N/S/L/V)S 55
C4B3954(N/S/L/V)S 55
C4B3960(N/S/L/V)S 55
C4B3966(N/S/L/V)S 55
C4B3972(N/S/L/V)S 55
C4B3978(N/S/L/V)S 55
C4B3984(N/S/L/V)S 55
C4B4424(N/S/L/V)S 56
C4B4430(N/S/L/V)S 56
C4B4436(N/S/L/V)S 56
C4B4442(N/S/L/V)S 56
C4B4448(N/S/L/V)S 56
C4B4454(N/S/L/V)S 56
C4B4460(N/S/L/V)S 56
C4B4466(N/S/L/V)S 56
C4B4472(N/S/L/V)S 56
C4B4478(N/S/L/V)S 56
C4B4484(N/S/L/V)S 56
C4B5824(N/S/L/V)S 56
C4B5830(N/S/L/V)S 56
C4B5836(N/S/L/V)S 56
C4B5842(N/S/L/V)S 56
C4B5848(N/S/L/V)S 56
C4B5854(N/S/L/V)S 56
C4B5860(N/S/L/V)S 56
C4B5866(N/S/L/V)S 56
C4B5872(N/S/L/V)S 56
C4B5878(N/S/L/V)S 56
C4B5884(N/S/L/V)S 56
C4B6424(N/S/L/V)S 56
C4B6430(N/S/L/V)S 56
C4B6436(N/S/L/V)S 56
C4B6442(N/S/L/V)S 56
C4B6448(N/S/L/V)S 56
C4B6454(N/S/L/V)S 56
C4B6460(N/S/L/V)S 56
C4B6466(N/S/L/V)S 56
C4B6472(N/S/L/V)S 56
C4B6478(N/S/L/V)S 56
C4B6484(N/S/L/V)S 57
C4B7124(N/S/L/V)S 58
C4B7130(N/S/L/V)S 58
C4B7136(N/S/L/V)S 58
C4B7142(N/S/L/V)S 58
C4B7148(N/S/L/V)S 58
C4B7154(N/S/L/V)S 58
C4B7160(N/S/L/V)S 58
C4B7166(N/S/L/V)S 58
C4B7172(N/S/L/V)S 58
pattern no. page
C4B7178(N/S/L/V)S 58
C4B7184(N/S/L/V)S 58
C4B8524(N/S/L/V)S 58
C4B8530(N/S/L/V)S 58
C4B8536(N/S/L/V)S 58
C4B8542(N/S/L/V)S 58
C4B8548(N/S/L/V)S 58
C4B8554(N/S/L/V)S 58
C4B8560(N/S/L/V)S 58
C4B8566(N/S/L/V)S 58
C4B8572(N/S/L/V)S 58
C4B8578(N/S/L/V)S 58
C4B8584(N/S/L/V)S 58
C4BSH24S 59
C4BSH24S5 59
C4BSH30S 59
C4BSH30S5 59
C4BSH36S 59
C4BSH36S5 59
C4BSH42S 59
C4BSH42S5 59
C4BSH48S 59
C4BSH48S5 59
C4BSHFS24 59
C4BSHFS30 59
C4BSHFS36 59
C4BSHFS42 59
C4BSHFS48 59
C4BTOP24(L/V) 59
C4BTOP30(L/V) 59
C4BTOP36(L/V) 59
C4BTOP42(L/V) 59
C4BTOP48(L/V) 59
C4BTOP54(L/V) 59
C4BTOP60(L/V) 59
C4BTOP66(L/V) 59
C4BTOP72(L/V) 59
C4BTOP78(L/V) 59
C4BTOP84(L/V) 59
C4BWRENCH 59
CA10818 50
CA10836 50
CA3018 50
CA3036 50
CA3618 50
CA3636 50
CA4218 50
CA4236 50
CA6018 50
CA6036 50
CA7218 50
CA7236 50
CA8418 50
CA8436 50
CA9018 50
CA9036 50
CD1-BD 101
CD1-FD 101
CD1-FS 101
CD1LKKT 101
CD1-ST 101
CD2PTC 101
CD2-PTC 122
CD2PTN 101
CD2-PTN 122
pattern no. page
CE10818 48
CE10836 48
CE3018 48
CE3036 48
CE3618 48
CE3636 48
CE4218 48
CE4236 48
CE6018 48
CE6036 48
CE7218 48
CE7236 48
CE8418 48
CE8436 48
CE9018 48
CE9036 48
CM10818 49
CM10836 49
CM3018 49
CM3036 49
CM3618 49
CM3636 49
CM4218 49
CM4236 49
CM6018 49
CM6036 49
CM7218 49
CM7236 49
CM8418 49
CM8436 49
CM9018 49
CM9036 49
CS2PFL24A 81
CS2PFL24B 81
CS2PFN24A 81
CS2PFN24B 81
CS2XPB 81
CT3BDLH6415BBFL 108
CT3BDLH6415FFL 109
CT3BDRH6415BBFL 108
CT3BDRH6415FFL 109
CT3FWSLH5024BBFL 116
CT3FWSLH5024FFL 116
CT3FWSLH5724BBFL 117
CT3FWSLH5724FFL 117
CT3FWSLH6424BBFL 118
CT3FWSLH6424FFL 118
CT3FWSRH5024BBFL 116
CT3FWSRH5024FFL 116
CT3FWSRH5724BBFL 117
CT3FWSRH5724FFL 117
CT3FWSRH6424BBFL 118
CT3FWSRH6424FFL 118
CT3SBLH4215BBFL 104
CT3SBLH4215FFL 104
CT3SBLH5015BBFL 105
CT3SBLH5015FFL 105
CT3SBLH5715BBFL 107
CT3SBLH5715FFL 106
CT3SBLH6415BBFL 108
CT3SBLH6415FFL 108
CT3SBRH4215BBFL 104
CT3SBRH4215FFL 104
CT3SBRH5015BBFL 105
CT3SBRH5015FFL 105
Calibre
132
pattern no. page
CT3SBRH5715BBFL 107
CT3SBRH5715FFL 106
CT3SBRH6415BBFL 108
CT3SBRH6415FFL 108
CT3SLH5015BBFL 105
CT3SLH5015FFL 104
CT3SLH5715BBFL 106
CT3SLH5715FFL 106
CT3SLH6415BBFL 107
CT3SLH6415FFL 107
CT3SRH5015BBFL 105
CT3SRH5015FFL 104
CT3SRH5715BBFL 106
CT3SRH5715FFL 106
CT3SRH6415BBFL 107
CT3SRH6415FFL 107
CT3WBDLH6424BBFL 112
CT3WBDLH6424FFL 112
CT3WBDRH6424BBFL 112
CT3WBDRH6424FFL 112
CT3WSBLH4224BBFL 110
CT3WSBLH4224FFL 115
CT3WSBLH5024BBFL 111
CT3WSBLH5024FFL 111
CT3WSBLH5724BBFL 112
CT3WSBLH5724FFL 111
CT3WSBLH6424BBFL 115
CT3WSBLH6424FFL 114
CT3WSBRH4224BBFL 110
CT3WSBRH4224FFL 115
CT3WSBRH5024BBFL 111
CT3WSBRH5024FFL 111
CT3WSBRH5724BBFL 112
CT3WSBRH5724FFL 111
CT3WSBRH6424BBFL 115
CT3WSBRH6424FFL 114
CT3WSLH5024BBFL 110
CT3WSLH5024FFL 110
CT3WSLH5030BBFL 120
CT3WSLH5030FFL 120
CT3WSLH5724BBFL 113
CT3WSLH5724FFL 113
CT3WSLH5730BBFL 119
CT3WSLH5730FFL 119
CT3WSLH6424BBFL 114
CT3WSLH6424FFL 113
CT3WSLH6430BBFL 120
CT3WSLH6430FFL 119
CT3WSRH5024BBFL 110
CT3WSRH5024FFL 110
CT3WSRH5030BBFL 120
CT3WSRH5030FFL 120
CT3WSRH5724BBFL 113
CT3WSRH5724FFL 113
CT3WSRH5730BBFL 119
CT3WSRH5730FFL 119
CT3WSRH6424BBFL 114
CT3WSRH6424FFL 113
CT3WSRH6430BBFL 120
CT3WSRH6430FFL 119
D 64
DT3CB15 125
DT3CB24 125
DT3CB30 126
DT3CB9 125
pattern no. page
DT3DCH 126
DT3FDD 121
DT3FDS15 123
DT3FDS24 123
DT3FDS30 124
DT3FM15 127
DT3FM9 126
DT3GBCDS 124
DT3HDS15 123
DT3HDS24 123
DT3HDS30 123
DT3MBCDS 124
DT3PDD 121
DT3RT 122
DT3SDD 122
DT3WSP 124
F 65
G 65
H 65
I 65
J 66
K 66
L 67
M 67
N 67
O 68
P 68
R 66
S 66
S2F2730CCC 75
S2F2730ECC 75
S2F2736CCC 75
S2F2736ECC 75
S2F2742CCC 75
S2F2742ECC 75
S2F3930CCCC 75
S2F3930ECCC 75
S2F3936CCCC 75
S2F3936ECCC 75
S2F3942CCCC 75
S2F3942ECCC 75
S2F5130CCCCC 75
S2F5130ECCCC 75
S2F5136CCCCC 75
S2F5136ECCCC 75
S2F5142CCCCC 75
S2F5142ECCCC 75
SA10818 53
SA10836 53
SA3018 53
SA3036 53
SA3618 53
SA3636 53
SA4218 53
SA4236 53
SA6018 53
SA6036 53
SA7218 53
SA7236 53
SA8418 53
SA8436 53
SA9018 53
SA9036 53
SC10818 52
SC10836 52
pattern no. page
SC3018 52
SC3036 52
SC3618 52
SC3636 52
SC4218 52
SC4236 52
SC6018 52
SC6036 52
SC7218 52
SC7236 52
SC8418 52
SC8436 52
SC9018 52
SC9036 52
SD10818 51
SD10836 51
SD3018 51
SD3036 51
SD3618 51
SD3636 51
SD4218 51
SD4236 51
SD6018 51
SD6036 51
SD7218 51
SD7236 51
SD8418 51
SD8436 51
SD9018 51
SD9036 51
T 66
U 67
Z 68
Calibre
133
This Selling Policy supersedes all previous selling policies and is inclusive of Knoll, KnollStudio and Muuto. Prices, discounts and product offerings aresubject to change without notice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terms & Conditionsof Sales
Sales by Knoll, Inc. or Knoll North America Corp. (‘‘Seller’’) of Knoll Product Lines (hereinafter ‘‘Products’’) within the United States and Canada are made onlyon the terms which are contained in this Selling Policy. Seller hereby gives notice of its objection to any different or additional terms and conditions. This sale isexpressly conditional upon Purchaser’s assent to the terms and conditions set forth below. Additional terms and conditions may apply to KnollStudio andKnollTextiles orders. These terms and conditions may be modified or supplemented only by a written document signed by an authorized representative of Seller.These terms and conditions supersede any prior and/or contemporaneous agreements or correspondence between Purchaser and Seller. Written quotationsexpire thirty (30) days from the date of issuance and can be withdrawn by written notice anytime during that period. Where Purchaser and Seller have enteredinto the Knoll Electronic Terms and Conditions, all orders, acknowledgements, invoices and other business communications placed or transmitted inaccordance with the Knoll Electronic Terms and Conditions shall be deemed to be in writing and signed and shall be valid for all purposes as if they wereoriginated and maintained in documentary form.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ordering Information All orders must be in writing. The product pattern number(s) contained on Seller’s order acknowledgement shall be the final expression of the order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Order Confirmation A purchase order is not binding on Seller until Purchaser has received Seller’s order confirmation or acknowledgment.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pricing Policies List prices are subject to change without notice.List prices shall be those prices in effect on the date of receipt of a complete purchase order unless shipment is requested more than ninety (90) days after orderentry in which case prices in effect on the date of shipment apply. List prices include specified freight costs. Unless specified in writing by Seller, no othercharges are included in Seller’s list prices.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Taxes All sales, use, excise and other taxes applicable to the sale of the Products shall be paid by Purchaser. If Purchaser claims an exemption from any tax,Purchaser shall submit to Seller the appropriate exemption certificates.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terms of Payment Payment for one hundred percent (100%) of the net order amount (including any applicable shipping and handling fee) is due within thirty (30) days of the dateof invoice, which is generally issued upon shipment. In case of any discrepancies, such as shortages, and Seller is notified in writing within ten (10) days ofreceipt of Product, only that portion may be deducted and the balance paid. For orders greater than $100,000 net, a fifty percent (50%) deposit is due at thetime of order placement, with the remainder due within thirty (30) days of the date of invoice.KnollStudio orders less than $2,000 require payment for one hundred percent (100%) of the net order amount (including any applicable sales tax and chargesfor inside delivery, special packaging, etc.), due at time of order placement. For KnollStudio orders greater than $2,000, a one-half (50%) deposit is due at timeof order placement with the remainder (including any applicable sales tax and charges for inside delivery, special packaging, etc.) due prior to shipment.If, in the judgment of Seller, Purchaser’s financial condition does not justify the terms of the payment, Seller may require full or partial payment in advance.Past due accounts shall be charged one and one-half percent (1.5%) per month, or the highest rate permitted by law, whichever is less, and will be added to theoutstanding balance. In the event Purchaser defaults on payment, Purchaser shall be liable for all collection costs, including reasonable attorney’s fees andcosts.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changes andCancellation
Standard purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Seller. Changes may effect delivery dates.Expenses incurred because of changes shall be charged to Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation chargesestablished by Seller. Orders for special Product, orders including ‘‘COM’’ (hereinafter defined) material and orders pursuant to expedited delivery programs,may not be canceled.QuickShip orders may not be changed or canceled without Knoll’s authorization. In the event of Muuto order changes, 25% payment of original net orderamount is required for changes incurring the week the order was entered. 100% payment of original net order amount is required for changes incurring the weekthe order is scheduled to ship. If Muuto is ordered on QuickShip, the QuikShip policy supersedes.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Freight Prepaid For standard orders, freight is prepaid and included in the price of all Knoll Office and KnollStudio Products, except KnollTextiles and Muuto, within the 48contiguous United States for orders placed with Knoll, Inc. and within Canada, excluding the Yukon, Northwest Territories, Nunavut and Newfoundland fororders placed with Knoll North America Corp. Packing is tested for rigorous motion and transportation but is not guaranteed to protect furniture from allconditions. If special packaging is required for any reason, please consult with your sales representative or dealer. Seller shall select the method of shipmentand routing. Freight for all KnollTextiles orders is prepaid and added to the invoice.Freight for all Muuto orders must be specified at time of order placement and added to the PO.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delivery/Freight Charges Shipments outside the contiguous 48 United States and Canada shall be shipped F.O.B. Origin.For shipments outside the contiguous United States and Canada, Purchaser is responsible for the cost of freight from point of embarkation, including anyhandling and transportation charges incidental to loading at the point of departure and unloading at the final destination.Conditions beyond the control of Seller, including weather, available facilities and traffic conditions, may affect exact time of delivery. Seller shall not beresponsible for specific carrier delivery date or time unless it has made a specific delivery commitment, in writing.Nonstandard methods of shipment and/or additional services are available upon request. Orders for QuickShip product shipping direct parcel or White Gloveare subject to additional shipping and handling charges and must be paid by Purchaser. Purchaser will be billed for the differential cost of any special servicesin excess of standard surface carrier freight costs. Premium charges, at Purchaser’s request, will be added for airfreight, exclusive use of vehicle and extra,export or special packaging. Accessorial charges will be added for inside delivery, extra labor, reconsignment and redelivery.Partial shipments may be made and invoiced by Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Claims All shipments for Knoll Products within the contiguous United States and Canada are F.O.B. Origin. All risk of loss passes to Purchaser at time of delivery tocarrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are, orshould be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to notify Seller during the ten (10) working day period shallconstitute acceptance of the Products and waiver of any apparent defects, errors or shortages. For all claims relating to Product damaged in transit or for anyother claims relating to or arising out of the transportation of the Product, Purchaser must seek recovery from the carrier and Seller has no liability to Purchaserfor such claims. Seller may, upon request, assist Purchaser with filing of such claims with the carrier, but Seller will not be liable for any of these transportationrelated claims.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selling Policy
134June 1, 2021
Seller’s Security Interest Until Seller receives the full payment for the Product, Seller shall have a security interest in the Product. Purchaser agrees to perform all acts, including but notlimited to the execution and filing of documentation, which may be necessary to perfect and assure the security interest of Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Returns The return of Products without a written authorization by Seller shall not be accepted. To receive authorization for Product return, please call Customer Service.All Products that are returned pursuant to a valid authorization shall be subject to a twenty-five percent (25%) of list restocking charge. Products not currentlyoffered for sale by Seller (including COM) shall not be authorized for return. All returned Products must be unused, in original condition and in the originalSeller packing cartons. No refund or credit shall be given for damaged Products.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Held Orders/Storage If Purchaser requests that an order be held or delayed, prices and terms and conditions in effect at the time of shipment shall apply. If Purchaser requests adelay after the time when Seller can defer production, Purchaser will be invoiced for the Product, payable in accordance with standard terms, when the order isready for shipment. Seller may transfer the Product to storage, in which case all expenses incurred in connection with storage, including demurrage, preparationfor storage, storage charges and handling shall be payable by Purchaser upon submission of invoices by Seller. Risk of loss to the Product shall pass to thePurchaser upon delivery of the Product into storage.
Customer’s Own Material A Purchaser who requests a fabric or other surface material not standard to Seller’s line of Products (‘‘COM’’) must submit samples of the requested material toSeller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets any requirements ofUnderwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For a description of theprocedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have no responsibility for the appearance,condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnify and hold Seller harmless for anydamages, injuries or losses arising out of or related to use of the COM on the Product.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship and materials,during the applicable warranty period set forth below.Warranty period set forth below is for 24-hour, 7 days a week, multi shift use (includes parts and labor to repair).Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment, Sellershall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.
Product and Period of Warranty
Lifetime: Antenna Workspaces, AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Morrison, Reff Profiles laminate, Rockwell Unscripted,Series 2 Storage, Template, Quoin and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2Veneer Front Storage, digital locks, upholstery, textiles and leathers, special or custom products, see below), Islands Collection table structure, legs, andlaminate worksurfaces.
12 Years: Chadwick, Generation by Knoll, k. task, Life, Moment, MultiGeneration by Knoll, Ollo, ReGeneration by Knoll, Remix, and Toboggan seating (exceptseating upholstery, textiles, leathers and finishes, see below).
10 Years: Anchor Storage except digital locks, Antenna Workspaces, AutoStrada, Crinion Open Table, Dividends Horizon, Dividends Horizon Satellite Surfaces,Reff Profiles, Rockwell Unscripted, Quoin wood components, Template wood components, Series 2 Veneer Front Storage, cascade edge worksurfaces, WoodCasegoods (The Graham Collection) (except wood casegoods upholstered surfaces, see below), Reuter overheads, Reuter vertical storage, KnollExtra SapperMonitor Arm Collection, Sapper XYZ Monitor Arm Series, Adjustable keyboard mechanisms and platforms, Communication Boards (except fabric boardtextiles, cork and FilzFelt, see below), Smokador collection (except leathers, see below), Orchestra Universal Systems Accessories, k. lounge structuralcomponents, KnollStudio Pixel and Propeller, Tone bases and k.screens, and dealer-purchased non BIFMA-certified Muuto products.
5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), special or custom product, wood veneerproducts and plywood, Currents handcrank, KnollStudio, Pixel Lounge, Rockwell Unscripted wire bases, Spark Series seating structural elements, structuralelements of all KnollStudio outdoor products including all Richard Schultz designed products, KnollExtra CPU holders and all universal storage drawers andPower Collection, k. bench (except changes in finish, see below) and k. stand bases (except changes in finish, see below), Islands Collection veneer worksurfaces,operational parts, wide grommet lid, castors, glides and electrical, and dealer-purchased non BIFMA-certified Muuto products.
3 Years: Rockwell Unscripted upholstery (except textiles and leather), Office Seating upholstery, textiles, leathers and finishes. Fabric boards textiles andSmokador Collection leathers, KnollExtra Pop Up Screens, k.screen (except cork and PET), and retailer-purchased Muuto products.
2 Years: Anchor Storage digital locks, Quoin digital locks, all other KnollExtra product.
1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, wood casegoods, upholstered surfaces, KnollStudio, textiles,leathers and outdoor product finishes, Pixel Lounge fabric, k. lounge upholstery and k. lounge fabric, Rockwell Unscripted fabric and accessories, k.screen corkand PET.
This warranty does not apply to:• Damage caused by a carrier other than the Seller.• Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products).• COM or other third party materials applied to Products.• Products not installed by or under the auspices of a Knoll Dealer.• Dramatic temperature variations or exposure to unusual conditions.• Changes in surface finishes, including colorfastness due to aging or exposure to light.• Except as specifically noted above, textiles and upholstery supplied by KnollTextiles and Spinneybeck FilzFelt (consult current price lists for applicable
warranties).Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matching of thecolors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces.THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANYWARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OFDEALING OR USAGE OF TRADE.The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of itsProducts. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller, with
Selling Policy
135June 1, 2021
respect to or arising out of the Product furnished hereunder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Delay/Force Majeure Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty, act of God, act of war or terrorism, act
of any governmental authority or of the Purchaser, riot, embargo, fuel or energy shortage, wrecks or delay in transportation, inability to obtain necessary labor,materials or manufacturing facilities from usual sources or failure of suppliers to meet their contractual obligations, or due to any cause beyond its reasonablecontrol. If any such event occurs, Seller may extend delivery dates by a period of time necessary to overcome the effect of such delay, allocate available Productor cancel any purchase order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compliance with Law PURCHASER IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS, ORDINANCES,REGULATIONS, RULES AND STANDARDS RELATING TO THE INSTALLATION, MAINTENANCE, USE AND OPERATION OF THE PRODUCTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Patents Subject to the following provisions, Seller shall, at its own expense, defend or, at its option, settle any claim, suit or proceeding brought against the Purchaser,and/or its vendees, mediate and immediate, so far as based on an allegation that any Product or any part thereof furnished hereunder constitutes a direct or acontributory infringement of any claim of any patent of the United States or Canada. This obligation shall be effective only if Purchaser shall have made allpayments then due hereunder and if Seller is notified promptly in writing and given authority, information and assistance for the defense of said claim, suit orproceeding. Seller shall pay all damages and costs awarded in such suit or proceedings so defended.The foregoing indemnity does not apply to the following:• Products supplied according to a design other than that of Seller, and which is required by the Purchaser.• Combination of the Product with another product not furnished hereunder unless Seller is a contributory infringer.• Any settlements of a suit or proceeding made without Seller’s written consent.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limitations of Liability SELLER, ITS CONTRACTORS, AUTHORIZED DEALERS AND SUBCONTRACTORS OR SUPPLIERS OF ANY TIER SHALL NOT BELIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM A BREACHOF THIS AGREEMENT.
Purchaser’s remedies set forth herein are exclusive and the liability of Seller with respect to the breach of this agreement or any contract entered into betweenthe parties pursuant hereto shall not exceed the price of the Product or part on which such liability is based.
Selling Policy
136June 1, 2021
KnollKey Lock Program
KnollKeyLock ProgramGeneral InformationFollowing is the KnollKey lock policy, applicable to all products.
Knoll furniture can be ordered keyed-alike or random keyed. Key-alikeand random keying instructions cannot be mixed on any single order. Onlyone of the two instructions can be used on an individual order. When anorder is submitted with mixed (key-alike and random) instructions, Knollwill release the order as key-alike only and lock cores will have to bespecified separately.
Key-alikeFor the convenience of the user, furniture may be keyed alike at nocharge. Write ‘‘Key-alike’’ in the description of your purchase order forany pedestal, overhead, file or other item you wish to have keyed alike.
Using the key-alike instructions, order cores and keys as line items onyour purchase order. Do NOT submit a key-alike form. The Knoll EastGreenville Lock Center will select key numbers from the standard range ofK 001 - K 250. Key numbers will not be repeated unless over 250 sets areordered. Lock cores keyed-alike will ship separately from the product,ready for field installation.
There is no charge for key-alike orders if placed with the furniture order.
IF THE KEY-ALIKE ORDER IS NOT PLACED AT LEAST TWO WEEKSPRIOR TO THE FURNITURE SHIP DATE, A $50 HANDLING CHARGEAND AIR FREIGHT CHARGES WILL APPLY.
If product is ordered and shipped random-keyed, additional lock coresfor key-alike are billable.
Random-KeyingTo specify product keyed-random, write ‘‘key-random’’ in the productdescription. Random-keyed product is shipped with the lock core factoryinstalled. A shrouded key is included. Random means no effort has beenmade to match key numbers, or to make them different.
KeysA Knoll shrouded key is shipped with every lock core. 250 Key numbersare available. For numbers above 250, contact Custom ProductDevelopment. Additional keys and key blanks are available. See serviceparts for more information.
Master KeyingKnoll locks can be controlled by means of a master key. There is noadditional per-lock charge for master keying. A letter of approval from theclient must accompany orders for master keys.
Installing Lock CoresLock cores can be installed or removed in the field by using a change key.Cores must be in the unlocked position to be removed. See service partsfor change key pattern number and pricing.
Lock DistributionAll orders for key-alike lock cores/keys are packaged and shipped fromthe East Greenville Lock Center, regardless of where the pedestals,overhead, or other units are produced. Random keyed product will havecores factory-installed.
How to SpecifyKey-AlikeFollowing is an example of how to specify key-alike for a cluster of 10workstations.
Step 1 - Using the project floorplan, count the number of locks in eachworkstation.
Step 2 - Count the number of workstations with the same quantity oflocks. Group together the workstations with a like number of locks.
5 workstations with 2 locks per station3 workstations with 4 locks per station2 workstations with 5 locks per station
Step 3 - For the first group (5 sets of 2 locks), enter the number ofworkstations in the quantity column.
Qty Pattern # Description Unit List Ext. List
5
Step 4 - Then enter the pattern number ‘‘KSPEC_ _’’ and add a suffix for thenumber of locks for that group (i.e., for 2 locks per station, add the suffix‘‘2’’). Up to 30 lock cores are available in a set (i.e., KSPEC 30).
Qty Pattern # Description Unit List Ext. List
5 KSPEC 2 Set of 2 cores/keys N / C N / C
Step 5 - Repeat for other groups.
Qty Pattern # Description Unit List Ext. List
5 KSPEC 2 Set of 2 cores/keys N / C N / C
3 KSPEC 4 Set of 4 cores/keys N / C N / C
2 KSPEC 5 Set of 5 cores/keys N / C N / C
Your Key instructions are complete.
Knoll will select key numbers for each set from 250 available numbers.Additional key numbers are available through Custom Product Development.For additions to existing installations, specify desired key numbers inthe description.
Service PartsPattern # Description List Price
KKEY_ _ _ Shrouded Key
Specify key number desired
$10
KBLANK Shrouded Key Blank $10
KSPECB_ _ _ Retrofit Universal Core/Key
Specify key number desired
$22
KCHANGE Change Key $10
HLKRKMASTER* Master Key $10
*Note: A letter of approval on company letterhead from the client mustaccompany all orders for master keys.
137
General Ordering Information
The ProductsThis guide encompasses all standard products for this product group.
SizesDimensions listed in this guide are indicated as:H = heightW = widthD = depthDia. = diameterRad. = radius
PricingAll prices shown are list.
How to OrderSelect pattern numbers and quantities required for your complete installation. Product questions can beaddressed in the specific sections of this guide or by contacting your sales representative or customerresource representative at 1-800-343-5665.
Next, select options (if required), along with colors and finishes appropriate to each product. Reference theFinishes and Fabrics pages for color designations.
On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization andhandling.
To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors andarea identifications are completely specified. Also, include complete purchase order numbers, bill-to andship-to addresses, a contact name and specific factory shipping dates required.
Mail all orders to:Knoll, Inc.1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry
Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of yourscheduled shipping date within five days of the original acknowledgment. If it is necessary to revise yourorder, please contact your customer resource representative.
Sustainability Statement
Sustainable design is a key component of Knoll’s environmental focus. Our commitment to socialresponsibility and a healthy environment has prompted us to further articulate our longstandingenvironmental programs and, with encouragement and support from our colleagues in the industry, we havere-energized our focus on such ‘‘green’’ initiatives as life cycle analysis and LEED™ certification. Knoll isproud to have contributed to projects that have received LEED certification from the U.S. Green BuildingCouncil.
For the latest information on Knoll products that help our customers achieve LEED certification, log on toknoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’
138