� Pressure, temperature, electricaland frequency

� Compact and rugged design

� High performance, simple to use

� Commissioning, calibration, trouble shooting

� QA compliant calibration software

� Low cost of ownership

CALI

BRAT

ORSPo r t a b l e C a l i b r a t o r s

Product Guide

P re s s u re M e a s u re m e n t

Total Capability for a World of Pressure

Established in 1972, Druck specialises inthe design and manufacture of precisioncalibrators and pressure sensors for awide range of applications.

The pressure calibrators benefit fromutilising Druck’s own high performancesilicon sensors. Druck has one of themost comprehensive and technologicallyadvanced silicon processing facilities.This ensures consistently high quality,reliability and performance.

The wide range of Druck portablepressure, temperature, electrical andfrequency calibrators set new standardsworldwide. Available in standard orIntrinsically Safe formats they arecompact, rugged, ergonomically designedand offer advanced yet practical featureswhich simplify precision calibration in thefield.

Features include built-in pressuregeneration, high accuracy cold junctioncompensation, task oriented dual displaysand data storage, complemented by menu-driven operation. PC based calibrationmanagement software is available toprovide a fully integrated system.

From a simple 4-20 mA loop tester to apowerful multi-function documentingcalibrator, Druck have the solution forindustrial field test applications.

Precision micromachined silicon sensors

Some Druck Portable Calibrator Features

Ergonomic computer assisted design

Clear, task oriented LCD graphic displays PC based calibration management software

Intrinsically Safe Versions

Pressure Sensors Division

A wide range of transducersand transmitters, available instandard or customiseddesigns to suit individual userapplications.

The Druck Group comprises fourteensubsidiary companies and a global agencynetwork with development andmanufacturing operations in Europe andthe USA.

To address a wide range of applicationsand markets, Druck has four productmarketing divisions. These groups arepressure sensors, portable calibrators,primary and secondary standards andAviation Ground Support Equipment.

In addition to the range of portablecalibrators, some products from the otherdivisions are shown. Refer to Druck forassociated product guides and datasheets.

Primary & Secondary Standards Division

A wide range of calibration standards areavailable, including deadweight testers,electronic pressure controllers and pressureindicators manufactured by Druck and groupcompanies Ruska and Pressurements.

Aviation Ground Support Equipment Division

A wide range of advanced Air Data Test Sets,aeronautical indicators and primary standardsare available for flightline and laboratoryapplications.

Po r t a b l e C a l i b r a t o r s

Pressure, Temperature, Electrical and Frequency

PRESSURE CALIBRATORS

To maintain and calibrate today’s high accuracy and smartinstrumentation, Druck offers the most precise fieldcalibrators for process applications.

Unplanned process downtime can be reduced as pressureand electrical sensors and transmitters are verified in-situ.

The high precision capability means controlinstrumentation can perform to closer tolerances, increasingboth quality and productivity.

Excellent long term stability ensures a guaranteed level ofaccuracy and a low cost of ownership.

● Pressure accuracy to 0.025% of reading

● mA accuracy to 0.005% of reading

● Built-in pressure/vacuum generation

● Simplified menu-driven operation

● ISO 9000 systems compatible

DPI 603

Built-in pressure/vacuum generation,fine volume control and loop supply make this calibrator ideal for transmittertesting.

● Fixed ranges to 20 bar

● Accuracy to 0.075% F.S.

● Loop power supply

● Dual display; pressure, mA, V

DPI 610 Series

Flexible, simple to operate calibrator. Thetask menu enables operating modes suchas pressure transmitter or switch test tobe configured at the touch of a button.

● Pressure ranges 2.5mbar to 700 bar

● Accuracy 0.025% F.S.

● Pneumatic/hydraulic pressuregeneration

● Remote sensors available

DPI 615 Series

The DPI 610 functionality is extendedto include two way PCcommunications and documentingcapabilities.

● Pressure ranges 2.5mbar to 700bar

● Field error calculation andPASS/FAIL report

● Over 20 dedicated tasks

● Stores over 40 testprocedures

DPI 605 Series

Two auto-ranging pressure sensorsprovide unsurpassed accuracy.Programmable safety limitsprotect the device undertest.

● Ranges from -1 to700 bar

● Accuracy 0.025% rdg

● Pt 100 probe input

● Barometric reference

Documenting Documenting

Documenting

TEMPERATURE AND

MULTIFUNCTION CALIBRATORS

Environmental and regulatory requirements are an integralpart of modern manufacturing processes and qualitycompliance is an important aspect which needs to beconsidered and implemented.

The Druck range of temperature and multifunctioncalibrators make it easier for test and maintenancepersonnel to comply with all necessary requirements.

Quality compliant records are easily achieved and at thesame time errors associated with manual documentationare eliminated.

● Compact, rugged and self contained

● Downloads procedures, uploads results

● Identifies calibration errors in the field

● User ID, tag and serial numbers recorded

● Reduces maintenance costs

TRX II Series

This rugged and reliable multifunctioncalibrator improves data qualityand saves time by using aPCMCIA interface.

● No docking required

● 1 Mbyte memory card

● Calibrates and simulates

● Remote pressure sensors

TRX Series

A process multi-calibrator for a variety oftemperature and electrical parameters.

● Simulates and reads RTD’s thermocouples and Ohms

● Reads and sources mV, V and mA

● Powers, reads, simulates 2-wire TX

● Simultaneous input/output

MCX II

90 input/output configurations for pressure,temperature, electrical and frequency in a singlemulti-function precision calibrator.

● Fully automatic operation

● PCMCIA memory card

● HART� module for Smart transmitters

● Replaces many standard test instruments

DBC Series

Two models cover temperaturesfrom -45oC below ambientto 650oC, available as a stablesource or a completecalibration system.

● Fast heating and cooling

● Ramping, stepping and presetvalues

● Loop power for TX calibration

● RTD, T/C, switch and TX testing

Documenting

Documenting

MCX II Pressure Module

A plug-in option for pressure capabilitywith accuracy to 0.05% of reading.

Documenting

TEST TOOLS

Decreasing staff levels and increasing workloads meaneveryday tasks such as routine maintenance, troubleshooting,plant commissioning and calibration need to be simplified.

Druck’s range of electrical testers and pressure indicatorsare lightweight, easy to use and essential tools for everymaintenance engineer.

These widely proven hand-held instruments are ruggedand compact for reliable operation in the most remote andhostile industrial environments.

● Cost effective range of products

● Pressure/leak, electrical, frequency

● Simplified menu-driven operation

● Closed case re-calibration

● Compact, rugged and self-contained

DPI 705/740 Series

Pressure/leak indicators with gauge,absolute or differential pressure rangesand internal or remote sensors.

● 0.1% F.S. accuracy

● Ranges up to 700 bar

● 16 pressure units

● Barometric versionaccuracy to �0.15mbar

UPS Series

A series of Smart loop testers whichsimplify everyday maintenance tasks.Easy to use menu operation selectslinear, flow or valve stroke options.

● Auto step/ramp

● Powers/reads 2 wire TX

● Sources/reads 0/4 - 24mA

● Displays mA or %span

MVX/VAX II Series

Two versatile calibrators specificallydesigned for analogue or digitalsignals and systems.

● Reads and sources mV, Vand mA

● Powers, reads, simulates2-wire TX

● Generates pulses, reads frequency

● Simultaneous input/output

DPI 720

A handheld multifunction process calibratorfor measuring, sourcing and simulating mostprocess signals within a single compact unit.

● Measures/simulates RTD’s, thermocouplesand ohms

● Measures/sources current and voltage

● Accuracy 0.04% rdg for mA, mV, V, ohms

● Reads input and output simultaneously

SOFTWARE

Calibrating field based instrumentation to quality standardssuch as ISO 9000 creates additional paperwork andincreases both financial and resource burdens.

The cost effective solution is calibration software whichsimplifies quality compliance and maintains optimum plantprocessing efficiency.

Druck offers a choice of Calibration Management Softwarecompatible with an extensive range of Druck and othertypes of field and workshop calibrators.

● Quick to install, easy to learn and use

● ISO 9000 and similar QA compliance

● Compatible with Druck and other calibrators

● Convenient resource and plant scheduling

● Windows based calibration software

Druck calibrators are compatible with other popularsoftware such as Cornerstone and Rosemount AMS

Linkpak-W

Designed to link Druck portable calibrators to a singleinstrument database. Calibration certificates aregenerated containing the information required to meetquality and regulatory approvals suchas ISO 9000 and FDA.

● Supports Druck portablecalibrators

● Password protection system

● “As Found” and “As Left” calibrations

● Easy-to-use export function

Intecal-W

Intecal-W is an easy to use calibration managementpackage. Multiple databases can be created toorganise data storage. A powerful search enginemakes it simple to retrieve instrument data.Unauthorised entry is prevented by afour level security password system.

● Multiple databases

● For field and workshop calibrators

● Manual entry for any calibrator

● Library for any process parameter

ACCESSORY

Hand PumpThe PV 411 “4 in 1” handpump is availablewith optional test kits. It replaces fourconventional devices and sets new standardsof performance in the following areas:

● Vacuum to 95%

● Low pressure control

● High pressure gas to 60 bar

● Hydraulic pressure to 700 bar

ACCESSORY

Ingress Dirt TrapThe IDT 600 is a simple yet effectivebarrier against dirt or moisture ingressfrom the system or device under test.

● Easy to install

● Low maintenance

● For pneumatic calibrators

● Prevents cross-contamination

Documenting Documenting

Druck Limited

Fir Tree Lane, GrobyLeicester LE6 0FH England

Tel: +44 (0) 116 231 7100Fax: +44 (0) 116 231 7103E-mail: sales@druck.comInternet: www.druck.com

P re s s u re M e a s u re m e n t

Agent

07/01

Quality Assured Service & Support

CO

S

Druck is committed to producing the highest qualityproducts. This commitment extends from initialconcept and development through tomanufacturing, testing and despatch.

Druck is approved to the highest internationalquality standards, including ISO 9001, CAA/FAAand also by many companies who apply their ownspecific QA requirements. UKAS accredited DruckLaboratories provide traceability to internationalstandards for pressure, electrical and temperaturemeasurements.

Operating through a global network of subsidiariesand exclusive agents, Druck maintains the higheststandards of customer service. A fully integratedcomputer system ensures efficient customersupport from sales enquiry to field service.Dedicated sales, product support, orderprocessing and service teams use qualityapproved procedures to ensure fast response withflexibility of operation.

This successful philosophy is continually proventhrough the efficient delivery of standardcatalogue products, custom products for specificapplications and even the management of largecomplex programme contracts.