Cade Dossier&References 2011
-
Upload
miguel-a-garcia -
Category
Documents
-
view
219 -
download
0
Transcript of Cade Dossier&References 2011
-
8/2/2019 Cade Dossier&References 2011
1/25
July, 2011
-
8/2/2019 Cade Dossier&References 2011
2/25
Company Highlights
MechanicalEngineers
Process engineers
Draughman
BussinesDevelopment
CADE is an expert provider of advanced and specialized engineering, technology and R&D services focused on process and
mechanical engineering, serving as a technical partner to its clients.
Since the beginning of its activities, CADEs philosophy has been focused on developing close collaborative relationships with its
clients. This objective is achieved by becoming an extension of ourclients engineering and technical staff, working together to face
any challenge.
In order to meet all of the client s requests, CADE takes on each and every project guided by the companys three main principles:
Specialization, Flexibility and Adaptation.
Staffs Structure
Founded: 2003
Current Staff: 14 employees
Profile
-
8/2/2019 Cade Dossier&References 2011
3/25
International Activity
International operations are focused on creating value by
establishing strong business to business relationships with
clients and partners that are involved in all stages of industrialproduction.
This value consists of acquiring a deep knowledge of different
markets, industrial fields and technologies in order to detect new
business opportunities and technological needs.
Since the foundation of the company in 2003, CADE has been involved in international projects working together with Spanish
clients and partners.
Since 2010, CADE has been developing its international operations with a principal focus on Europe (United Kingdom,
Benelux, France, Romania and Turkey among others). The company estimates that foreign markets will comprise nearly 25percent of the companys total revenue in 2011.
-
8/2/2019 Cade Dossier&References 2011
4/25
WHAT DOES CADE DO?
Nowadays, it is essential to face any complex problems associated
with the development, design, operation and upgrade of existing
or new technologies and the related equipment by applying multiple
engineering and technology approaches.
With the goal of obtaining the best solution available and maximizing
effectiveness and efficiency, it is necessary to understand the implicit
problems of these technologies and the related equipment during all
stages.
This task can only be achieved by applying all the engineering
disciplines involved in the design, fabrication, start-up and operation
phases together with a comprehensive knowledge and vast
experience in numerous industrial fields.
CADE combines advanced capabilities in mechanical and
process engineering working collectively with its clients toachieve these objectives.
CADE supports its clients by providing custom-made engineering
solutions adjusted to suit the nature of the client s projects and
technical capabilities.
This support consists of the application of some or all the following
disciplines:
FINITE ELEMENTANALYSIS
COMPUTATIONAL
FLUID DYNAMICS
DYNAMIC
SIMULATION
PROCESS
SIMULATION
HEAT TRANSFER
-
8/2/2019 Cade Dossier&References 2011
5/25
Technologies, Applications and Scopes
Technology Development R&D Integration, assessment and upgrade of technologies and equipment
Troubleshooting
Basic engineering
Process Equipment Design and upgrade Heat Transfer
Refrigeration and Cooling
Waste Heat Recovery
Steam Generation
Cleaning of gases
Collection and use of Biogas
Biodiesel production technology
Drying Technologies Mixing equipment and processes
SCOPE OF WORKS
INDUSTRIES SERVED
Power Generation (Conventional, non Conventional)
Renewable Energy
Refinery Plants
Petrochemical Industry Waste Treatment Plants
Chemistry and Pharmacy
Food Industry
CUSTOMERS
Plant Owners
Technology Licensors
EPC Contractors
Package Unit Suppliers
Manufacturing CompaniesEngineering Companies
-
8/2/2019 Cade Dossier&References 2011
6/25
Due to the specialized nature of CADEs activities,
new applications, potential upgrades andtransfers of technology from one sector to
anotherare commonly required in order to take on
ourclients most challenging projects.
Advanced
EngineeringServices
CLIENT / PARTNER
Know-How
R&D Activities
Technology
Equipment
B2B NETWORK
Business
Development
R&D Philosophy
Design and development of innovative SPRAY DRYER
CDTI
Design and development of hydrogen production technology from
humid biomass waste
Lnea Inncorpora Torres Quevedo Ministry of Education
HTF System optimization of CSP plants (Concentrated Solar Power).
CADE
Strategic R&D Activities
SOLAR
WASTE TREATMENT AND ENVIROMENTAL TECHNOLOGIES
BIOMASS / BIOGAS
WASTE HEAT
Ongoing R&D Projects
CADE takes advantage of being integrated in the
ALBACETE SCIENTIFIC AND TECHNOLOGICALPARK in order to count on the most significant
institutions in technology and R&D for support and
collaborative work.
CADE actively integrates internal R&D activities
within its business structure in order to facethese challenges and generate knowledge that
allows us to develop new technologies,
applications and products.
-
8/2/2019 Cade Dossier&References 2011
7/25
Advanced Mechanical Engineering
Advanced Mechanical Engineering for industrial equipment based on FEA
(Finite Element Analysis)
R&D.
Fitness for Service assessment for industrial equipment
Operational Life expectancy analysis
Structural analysis, linear, non-linear, buckling
Thermal-Mechanical AnalysisThermal Transient Analysis
Fatigue analyses and evaluation, for short&long term thermal / pressure loading
cycles.
Full Dynamic Response, Spectrum, Harmonic, Modal Analysis
CFD Analysis (computational fluid dynamics)
Complementary services
Conventional Process and Mechanical Equipment Engineering.Pressure vessel design
Thermal, hydraulic and mechanical design
Process design
Data sheet issue
Dimensional, Layout and Detailed manufacturing drawings
Piping Engineering (Piping specifications, Piping design,
Pipe Stress Analysis and Support Design)
SERVICES
-
8/2/2019 Cade Dossier&References 2011
8/25
Advanced energy, thermal and process engineering
Advanced Energy, Thermal and Process Engineering.
Technology Development. R&D.
Integration, evaluation and improvement of technologies and equipment
Dynamic simulation of process & equipment and integration
Energy efficiency and thermo-economic optimization
Safety engineering (ATEX-HAZOP-SIL)
Conventional Plant & Process Engineering
Basic and detail engineering review and supervisionFEL analysis
Process Engineering (P&IDs, PFD, etc.)
Engineering specifications review
Definition and calculation of main process equipment (pumps, heat exchangers,
filters, vacuum groups, vessels, etc.)
Definition and calculation of auxiliary services (steam, HTF, blanketing/inertization,
compress air, etc.)
Purchasing Engineering
Complementary services
SERVICES
-
8/2/2019 Cade Dossier&References 2011
9/25
Case Study
Validation research for desing modifications in flare gas recovery
Validation research of flare system with new K.O. drum and liquid seal including:Inlet gas temperature calculation at the flare base by Modeling of gas cooling across PSVs and along lines
(alkylation MHC/ALE)
Vacuum phenomenon analysis in flare collectors
Temperature profile calculation at flare shaft in stationary and transient conditions
HAZOP study
Mechanical research of flare including:
Stationary CFD analysis + Structural FEM analysis based on process data obtained
Tasks to be carried out:
Objective:
Analysis of flare substitution needs
-
8/2/2019 Cade Dossier&References 2011
10/25
Case Study
PRESSURE EQUIPMENT ANALYSIS
Study of thermal - structural response at critical parts.
Fatigue analysis
Dynamic / Static performance
Design criteria / code compliance
Thicknesses optimization
Nozzle to Shell junctions
Nozzle allowable stress
Skirt to shell to head junctions Shell Transitions
Internal pipes and supports
-
8/2/2019 Cade Dossier&References 2011
11/25
Case Study
PRESSURE EQUIPMENT
Study of thermal - structural response at critical parts.
Fatigue analysis
Dynamic / Static performance
Design criteria / code compliance
Thicknesses optimization
Nozzle to Shell junctions
Nozzle analysis Skirt to shell to head junctions
Shell Transitions
Internal pipes and supports
Saddles
Lifting Trunnions and Lugs
-
8/2/2019 Cade Dossier&References 2011
12/25
Case Study
HEAT EXCHANGERS Thermal design as per TEMA
Mechanical Design
Fatigue analysis
Performance analysis
Exergetic analysis
Dynamic / Static performance
Thicknesses optimization
Nozzle to Shell junctions
Nozzle allowable stress
-
8/2/2019 Cade Dossier&References 2011
13/25
Case Study
WASTE HEAT BOILER
Thermal & Process design
Mechanical Design
Tubeside lining
Wind shields
Fatigue analysis
Performance analysis
Exergetic analysis Dynamic / Static performance
-
8/2/2019 Cade Dossier&References 2011
14/25
Case Study
WASTE HEAT BOILERS
Thermal & Process design
Mechanical Design
Tubeside lining
Wind shields
Fatigue analysis
Performance analysis
Exergetic analysis
Dynamic / Static performance
-
8/2/2019 Cade Dossier&References 2011
15/25
Case Study
SILOS AND TANKS
Structural / Mechanical Design
FEM analysis
Validation of Design not covered by standard codes
Thicknesses optimization
Dynamic response for agitators / external loads
-
8/2/2019 Cade Dossier&References 2011
16/25
Case Study
Thermal & Process design
Mechanical Design
Fatigue analysis
Dynamic / Static performance
Self supported
Guyed
Derrick supported
KO drums
Molecular seals
FLARES AND STACKS
-
8/2/2019 Cade Dossier&References 2011
17/25
Case Study
FLUE GASAnalysis and optimization in non-conventional structures and equipment
FEA/CFD
Seismic and Dynamic Analysis
Fatigue Analysis
Troubleshooting
By-Pass Systems
Ducts
Stacks Dampers
-
8/2/2019 Cade Dossier&References 2011
18/25
Case Study
FLUE GASAnalysis and optimization in non-conventional structures and equipment
Seismic and Dynamic Analysis
Fatigue Analysis
By-Pass Systems
Ducts
Stacks
Dampers
-
8/2/2019 Cade Dossier&References 2011
19/25
Case Study
BIODIESEL PRODUCTION PLANTS
Owners Engineering
Process and Detail Engineering.
Purchasing and Construction Management
-
8/2/2019 Cade Dossier&References 2011
20/25
Client / Final Client Description Date
Prematecnica ACS - COBRA Castor Project. FEM Analysis of Vent Stack 2010
ENEL Marcinelle CCGT Power Plant BELGIUM. FEM Analysis of Steam Boiler Stack 2010
METKA Brazi CCGT Power Plant ROMANIA. FEM Analysis of Steam Boiler Stack 2010
CERNEYCentre de Traitment Multifilires de Dchets Mnagers avec Valorisation Energtique Marsella
FRANCE. FEM Analysis of Steam Boiler Stack2010
Flares & Stacks
Client / Final Client Description Date
Technip Iberia FEM analysis for pressure re-rating in reactor 2011
Tecnicas Reunidas Mercury Removal Reactor FEM analysis (Repsol Bolivia) 2011
Welders Mechanical design of BEM Type Heat Exchanger 2011
Degussa Mechanical Design of Heat Exchanger 2011
GEA Batignolles CFD transient analysis and FEA structural-fatigue analysis of air cooler 2011BP Oil
FEM analysis and internal steam pipes flexibility stress analysis for process reactor. Castellon
Refinery2011
Felguera
Conoco PhillipsFatigue FEM Analysis for Coke Drums.
Wilhelmsshaven ugrader project
2010
Tecnicas Reunidas FEM Analysis for Flexicoker RegeneratorElefsis Refinery Upgrade Project (Greece)
2010
Bachiller Fitness for service assesment. FEM analysis of Poland Molten Salt Reactor according toAD2000. Poland
2010
Foster Wheeler FEM Analysis for vacuum distillation column 2010
Pressure Vessels and Heat Exchangers
PROJECT REFERENCES
-
8/2/2019 Cade Dossier&References 2011
21/25
Client / Final Client Description Date
TICONAFatigue FEM Analysis "Reactor 301B1040" according to AD2000 - S2
(TiGer) Ticona Kelsterbach Relocation Project (Germany) 2010
Conoco Phillips Wilhelmshavener Raffineriegesellschaft (Germany)Fatigue FEM Analysis COKE DRUMS D-6130 A/B according to ASME VIII Div. 2
2010
Technip Validation FEM analysis for new connection of aero -refrigerator 644-E-3Tarragona Refinery
2009
Hellenic PetroleumFEM analysis of skirt-to-shell junction at item 32-v- 007 Bed Silo Coke
Elefsis Refinery Upgrade Project (Greece)2009
GALPReconversao da refinara de Sines Portugal
FEM Analysis of skirt-to-shell joint at Item HIGH TEMPERATURE SHIFT REACTOR - HR-R-4
according to ASME VIII Div.22009
Repsol Thermal - Structural FEM Analysis accordint to ASME VIII Div. 2 of Skirt to Shell junction forprocess reactors. Cartagena Refinery (11 items)
2009
Saudi AramcoHawiyah Plant Expansion (Saudi Arabia)
ThermalStructural FEM Analysis of top head to shell and tray support to shell junction (3 items)2008
Saudi AramcoGas Treating Facility Hawiyah Plant Expansion (Saudi Arabia)
FEDD GAS K.O. DRUM ThermalStructural FEM Analysis2008
RepsolThermal-Structural FEM analysis of process reactor in post welding heat treating
Cartagena Refinery2007
PetronorFEM analysis of Skirt to Shell junctiont in fuel-oil reduction unit (coker blowdown) according to
ASME VIII Div. 2. Murkiz - Spain2007
Repsol Cartagena Refinery. Hydrocracking Unit.Stripper Detail engineering
2007
Saudi AramcoJuaymah Gas Plant Project (Saudi Arabia)
Fatigue FEM Analysis Butane Dehiydrator according to ASME VIII Div. 22007
PEMEXRefinery General Lzaro Cardenas Ninatitlan Veracruz (Mexico)
Thermal-Structural FEM Analysis of skirt-to Shell junction in process column2007
-
8/2/2019 Cade Dossier&References 2011
22/25
Client / Final Client Description Date
PETROVIETNAMDung Quat Refinery Project (Vietnam)
FEM analysis of Trunnions-to-shell junction for elevation operation in Process Column2006
REPSOLThermal-Structural FEM Analysis of Skirt to Shell and catalyst tray support to shell junction in
reactor HDS-NCX according to ASME VIII Div. 22006
Process Equipment
Client / Final Client Description Date
ROMPETROL Deaerator Thermal & Process Design 2011
ROMPETROL Steam Dryer Thermal & Process Design 2011
Feedwater Heaters
Client / Final Client Description Date
Therco Thermal design of LP heaters and Bypass Condenser 2010
Schelde Exotech Thermal design review of LP Feedwater Heater 2009
ESB Thermal design of LP and HP feedwater heaters 2006Endesa Thermal design of LP Feedwater Heater 2006
TNB Thermal design of HP Feedwater Heaters 2003
-
8/2/2019 Cade Dossier&References 2011
23/25
FLUE GAS Systems
Client / Final Client Description DateNational Petrochemical Co./TECHNIP KTI S.p.A.
Ilam Petrochemical Complex .IRAN
BY PASS System FEM Analysis. Detail engineering 2009
Niger Delta Power Holding
Company of Nigeria
Gas Turbine Open Cycle Plant .Port Harcourt, NIGERIA
BY PASS System FEM Analysis. Detail engineering 2009
ENELPuente Nuevo Combined Cycle Plant Crdoba-Spain
Ducts and Racks FEM Analysis2008
Tecnicas ReunidasEscatron Combined Cycle Plant. Spain
BY PASS System FEM Analysis. Detail engineering2008
GE EnergyVasilikos Combined Cycle Plant. Cyprus
BY PASS System FEM Analysis. Detail engineering2007
PETROBRASAlstom UK
T-Box Dumper Oil Platform P-53 Marlim Leste - BRAZILFEM Analysis. Detail Engineering 2006
CEPSAN-S Gas Ducts (General Furnace Fumes) Gibraltar Refinery Spain
FEM Analysis2006
Wingas GmbHGas Distributor FEM analysis
VD-Station Mallnow Germany2006
Abu Dhabi Water and
Electricity Company (ADWEC)
Umm Al-Nar Independent Power and Water Project UAE
Diverter FEM Analysis2004
IberdrolaEscombreras Combined Cycle Plant Murcia - Spain
BY PASS System FEM Analysis. Detail engineering2004
Iran Power Development Management Co. MAPNAKerman Combined Cycle Plant Kerman IRAN
Diverter and Flue Gas Valves
2004
Iran Power Development Management Co. MAPNA Kazeroun Combined Cycle Plant Fars - IRANDiverter and Flue Gas Valves
2004
Iran Power Development Management Co. MAPNA YAZD Combined Cycle Plant - Yazd - IRANBY PASS System FEM Analysis. Detail engineering
2003
Iran Power Development Management Co. MAPNA NEKA combined cycle Plant Mazandaran - IRANBY PASS System FEM Analysis. Detail engineering
2003
-
8/2/2019 Cade Dossier&References 2011
24/25
Waste Heat Boilers
Client / Final Client Description DateROMPETROL Thermal design of Waste Heat Boiler. FEM Analysis 2011
ROMPETROL Thermal design of Waste Heat Boiler. FEM Analysis 2010
EBL Troubleshooting WHB for Biomass Power Plant 2008
Takreer Writing maintenance and repair procedures 2005
ABB Lummus Thermal design of Waste Heat Boiler 2005
SAFCO Thermal design of Reformer Waste Heat Boiler 2004
Sasol Troubleshooting Gasifier Waste Heat Boiler 2001
Steam Generators
Client / Final Client Description Date
Invista Textiles Design review for Kettle Steam Generators 2008
Enwesa Design review of Steam Generator for Solar Power Plant 2006
ME Engineering Thermal design of Rotor Air Cooling Kettle Boilers 2005
Siemens Thermal design of Rotor Air Cooling Kettle Boilers 2001
CCGT Boiler Room
Client / Final Client Description Date
ENEL Process and detail engineering 2009
METKA Process and detail engineering 2009
-
8/2/2019 Cade Dossier&References 2011
25/25