CA Industrial
description
Transcript of CA Industrial
3
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Cannon
CA Industrial
Bayonet Connectors
4
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
A Historical Achievement of Technology LeadershipDefi ning and Championing InnovationShowcasing a portfolio of creativity, ITT’s “Engineered For Life” execution embraces products which have become ubiquitous in a broad collection of markets including: Military/Aerospace. Civil Aircraft, Industrial Instrumentation, Medical, Oil & Gas, Energy, Transportation, Telecom/Handset, Computer, Consumer, and Automotive. ITT’s rich interconnect history embraces contributions of both technological breakthroughs and social movements. With one of the industry’s broadest product offerings, ITT’s interconnect products have supported.
Every Free World space mission, bringing the universe to our universe to our doorstep.• Motion picture, radio, and television equipment, serving laughter and entertainment to •
millions.Commercial and military communications systems, linking the voices of the world.• Computerized tools, reshaping the information highway.• Aircraft, rapid transit, and automobiles, mobilizing our expanding society.• Oil and natural gas production, powering the world’s economies.•
www.ittcannon.com
1915: Cannon founded
by James Cannon
1940: Cannon
creates“K” series
connectors for DC-1’s
1950: Cannon
develops the first
“Tri-Service” connector,
the mother of modern-
day military spec’s
1960: Cannon
originates the first
“D-sub” connectors
1980: Cannon
creates first zero
insertion force
medical connector
2010 …and beyond!
2000: Cannon creates
the first solderless
component inter-
connector contact
1990: Cannon innovates
Type I and Type II card
kit products
Cannon partners with
future innovators
1930: Cannon
1970: Cannon
develops the first
“Micro” connectors
ITT Cannon, VEAM, & BIW Timeline
da0: 193309 Cannon aaCaC
1940:: CanCCaC ononnnon
s“K”creates“es“K serieserK” sKK e
& BIW Timeline
9509 : nCannC oon
firsevelops the fihe fififi t st rr
conTri-Service” ce” cco” nector,nnnn
of mhe mother ooff odern-mo
specay military sy sp ’sc’e
199de
“T
th
da
gg
“D-“D ubbu-suD-
196119 0: :::6096 Cannon C
ates the fiorigor inanangiri n
1970: annoCaCan non
ps thdeveloppsoo e firsthhheh
20002 tC t
3
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
1 Connector Series Selection Table .......................................................................... 4-5
2 Cannon´s range of industrial connectors .................................................................4
3 Introduction CA-Industrial Connectors: ....................................................................3
4 Features ..........................................................................................................................4
5 Part Number Creation ...................................................................................................7
6 Endbell Selection ..........................................................................................................8
7 Electrical Data ................................................................................................................9
8 Mechanical Data ..........................................................................................................11
9 Layout reference / Contact arrangement ................................................................13
10 Shell Styles ...................................................................................................................22
11 Contacts ........................................................................................................................22
12 Acessories ....................................................................................................................24
13 Assembly Instructions ...............................................................................................26
14 Part Number Index ......................................................................................................30
14 Product Safety Information .......................................................................................30
www.ittcannon.com
4
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Available - Not available
Con
tact
sSh
ell P
lati
ngEn
viro
nmen
tal
Mec
hani
cal
Elec
tric
alG
ener
alConnector Series Selection Table
Sure Seal CLC SLC SLE APDTrident
Rectangular
Trident
CircularMS E/F/R
Industrial/Commercial
Military - - - - - - -
Standards/Associated - SAE J2030 USCar
SAE J2030 USCar
SAE J2030 USCar ISO 15170
UL 1977 NFF 61-030
(TFR)
UL 1977EN 61984
MIL-DTL-5015VG 95342
Number of Circuits 2 to 10 2 & 4 5, 8, 10 & 15 19 & 28 1 to 51 2 to 36 4 to 48 1 to 65
Max. Operating Voltage 48 V DC 300 V AC 300 V AC 300 V AC48 V DC
High Voltage:500 V DC/AC
250 V AC250 V AC
High Voltage:500 V DC/AC
50 V DC
Dielectric Withstanding Voltage (at sea level)
1200 V AC 1000 V AC 1000 V AC 1000 V AC1000 V AC
High Voltage:3500 V AC
2000 V AC2000 V AC
High Voltage:3500 V AC
3000 V AC
Max. Current Rating @ 40°C 17 A 5 A 13 A 13 A 245 A 13 A 30 A 245 A
EMI/RFI Shielding - - - - - -
Wire Gauge Range AWG 20 to 14 20 to 16 20 to 16 20 to 16 22 to 0 26 to 14 26 to 12 26 to 0
Wire Gauge Range mm² 0,4 - 1,5 mm² 0,50 - 1,0 mm² 0,50 - 1,0 mm² 0,50 - 1,0 mm² 0,35 - 50 mm² 0,14 - 2,5 mm² 0,14 - 4,0 mm² 0,14 - 50 mm²
Power & Signal Layouts - - - - - -
Mating Cycles (max.) 100 25 25 25 50 500 500 100
Type of Coupling Ring Snap Clip Lock Snap Lock Snap Lock Bayonet Snap Lock Bayonet Thread
Mechanical Coding - - - -
Environmental Sealing (mated condition)
IP 68 (1 bar / 12h) IP 68 IP 68 IP 68 IP67
IP69k IP 20 IP 67 IP 68
Operating Temperature -40°C to 105°C-40°F to 221°F
-40°C to 150°C -40°F to 302°F
-40°C to 150°C -40°F to 302°F
-40°C to 125°C -40°F to 257°F
-40°C to 125°C-40°F to 257°F
-55°C to 105°C -67°F to 221°F
-55°C to 125°C-67°F to 257°F
-55°C to 125°C -67°F to 257°F
Shock Test (g‘s) 50 100 100 100 - 50 50 50
Max. Vibration Resistance 10 - 55 Hz1,5 mm
100 m/s² 10 g´s
100 m/s² 10 g´s
100 m/s² 10 g´s
300 m/s² 30 g‘s
100 m/s² 10 g´s
100 m/s² 10 g´s
100 m/s² 10 g´s
Individual Wire Sealing -
Cable Jacket Sealing - - - -
Shell Material Nitril-Butadien Elastomer Thermoplastic Thermoplastic Thermoplastic Polyamide
PlasticPolyamide
PlasticBlack Nylon or
Zinc Alloy Aluminum Alloy
RoHS Nickel (48h salt spray) - - - - - -
Cadmium (olive, 500h) - - - - - - -
RoHS Zinc Cobalt (black, 200h) - - - - - - -
Zinc Cobalt (green, 200h) - - - - - - - -
RoHS Zinc Nickel (blue, 500h) BLUE GENERATION®
- - - - - - - -
Contact Plating Tin or Silver Tin or Gold Tin or Gold Tin or Gold Tin, Silver or Gold Tin or Gold Tin or Gold Silver or Gold
Crimp, machined -
Crimp, stamped -
Solder - - - -
Printed Circuit Solder -
Co-Ax - - - - - -
Fiber Optic - - - - - - - -
First-Mate Last-Break - - - - -
5
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
CA Bayonet CA-INDUSTRIALCA Triple
ThreadCGL KPT / KPSE KPTC PV KJL KJ KJA
-
- - -
VG 95234 - ISO 16750VG 95234
DIN/VDE 0627 5.4.3
IEC 512-25-1DIN/VDE 0100
Part 410
MIL-DTL-26482 Series 1,
VG 95328
MIL-DTL-26482 Series 1,
VG 95328
MIL-DTL 26482 Series 2
MIL-DTL-38999 Series I
MIL-DTL-38999 Series II
MIL-DTL-38999Series III
1 to 85 2 to 55 1 to 85 3 to 11 2 to 61 2 to 61 3 to 61 3 to 128 3 to 128 3 to 128
50 V DC 50 V DC 50 V DC 700 V DC 50 V DC 50 V DC 500 V AC 1250 V AC 1250 V AC 1250 V AC
3000 V AC 2000 V AC 3000 V AC 7200 V AC 2300 V AC 2300 V AC 2300 V AC 2300 V AC 2300 V AC 2300 V AC
245 A 30 A 245 A 100 A 22 A 22 A 23 A 23 A 23 A 23 A
26 to 0 26 to 12 26 to 0 15 to 3 24 to 16 24 to 16 24 to 12 28 to 12 28 to 12 28 to 12
0,14 - 50 mm² 0,14 - 4,0 mm² 0,14 - 50 mm² 1,5 - 25 mm² 0,21 - 1,91 mm² 0,4 - 2,0 mm² 0,4 - 5,0 mm² 0,45 - 5,0 mm² 0,45 - 5,0 mm² 0,45 - 5,0 mm²
- -
500 200 500 500 500 500 500 500 500 500
Reverse Bayonet
Reverse Bayonet Triple Thread Bayonet Bayonet Bayonet Bayonet Bayonet Bayonet Triple Thread
- - - -
IP68 (1 bar / 16h) IP69k
IP68 (1 bar / 16h) IP69k
IP68 (1 bar / 16h) IP69k
IP 67 IP 68(0,2 bar / 48h)
IP 68(0,2 bar / 48h)
Environmental resitant acc. to
EIA-364-02
Environmental resitant acc. to
EIA-364-02
Environmental resitant acc. to
EIA-364-02
Environmental resitant acc. to
EIA-364-02
-55°C to 125°C -67°F to 257°F
-55°C to 125°C -67°F to 257°F
-55°C to 125°C -67°F to 257°F
-50°C to 140° C-58°F to 284°F
-55°C to 125°C -67°F to 257°F
-55°C to 125°C-67°F to 257°F
-55°C to 200°C-67°F to 392°F
-65°C to 200°C-85°F to 392°F
-65°C to 200°C-85°F to 392°F
-65°C to 200°C-85°F to 392°F
50 50 50 50 50 50 10 300 300 300
200 m/s² 20 g´s
100 m/s² 10 g´s
300 m/s² 30 g‘s
300 m/s² 30 g‘s
200 m/s² 20 g´s
200 m/s² 20 g´s
200 m/s² 20 g´s
300 m/s² 30 g‘s
10Hz - 500HzRandom: 43,7g
600m/s² 60g‘
- - -
Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy Aluminum Alloy
- -
- - - - -
- - - - - -
- - - -
Silver or Gold Tin or Gold Silver or Gold Silver or Gold Gold Gold Gold Gold Gold Gold
- (KPSE)
- - - - - - - - -
- (KPT) - - -
- -
- - - - -
- - - - - -
- - - - - -
6
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
About ITT
Interconnect Technologies & SolutionsFor over 90 years, ITT has been developing innovative solutions for harsh environment applications. We have a proven track record of demonstrating our expertise and commitment to the industry, offering the broadest portfolio of interconnect products.
Our interconnect range include sealed circulars, plastic and metal shell bayonet coupling circulars, miniature metal shell circulars, PC board header connectors, sensor and direct device connectors. ITT is also a systems supplier, providing value-added module and harness assemblies.
Cannon’s range of industrial connectors
CA-T High Vibration Resistance CA Triple Thread is a series of Industrial aluminium connectors with threaded coupling for high shock and vibration applications. CA- T uses the well known CA- Bayonet contact layouts with more than 180 different contact confi guraions and Currents up to 245 Amps.
COM Intermateable to military StandardsCA-COM is a series of Industrial Aluminium Connectors with Bayonet or Threaded coupling. They are Intermateable with MIL 5015 or VG95234 connectors. Contact layouts with 1 to 37 contacts are available. CA-COM has reliable, robust machined contacts for signal and power. These connectors are suitable for currents up to 245 Amps and an operating voltage of 50 V.
CMX Compact Servo ConnectorsCMx is a series of compact connectors for Servo motors. Power and signal connector is in one single housing. These connectors can be used for currents up to 40 Amps and they are easy and quick installable.
7
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Introduction CA-Industrial Connectors:
CA- Industrial (CA-I) is a series of highly reliable bayonet connectors for industrial applications. These connectors are derived from Cannons CA-Bayonet Series according to the VG95234 standard. The CA-I uses the same robust aluminium shell design as the proven CA-Bayonet series. To meet industrial requirements in terms of reduced installation effort the CA-I is equipped with a hard plastic insulator and stamped contacts that allow highly automated and quick processing. The CA-I also uses the well known contact layouts of the CA-Bayonet VG95234 connectors, however due to the different contact designs they are not intermateable.
FeaturesBayonet coupling .The Bayonet Principle allows fast mating and unmating of the connector with a simple 120° turn of the coupling nut. At the end of the mating process an audible and feel able click indicates “Connector closed” to the user. This ensures that the connector is closed completely and fully reaches its specifi ed vibration resistance and Environmental sealing. The coupling nut of the CA-I is equipped with roller Bolts made out of stainless steel that reduce mating forces and wear of the bayonet ramps. Bayonet connectors are very robust against dirt and can be cleaned easily.
Sealing up to IP69KFor the CA-I a selection of different endbells is available.Depending on the used endbell different environmental sealing grades can be realized. With the universal endbell a sealing up to IP69k according to DIN 40050 is ensured. This means that CA-I connectors can be used in applications where jet water cleaners are used.
500 h Salt Spray resistance and RoHs complianceCA-I connectors are designed for reliable use under demanding environmental conditions. In order to make the aluminium shell resistant against aggressive media it can be plated with several platings. This can be standard Nickel or Cannons high performance plating Blue Generation that provides a salt spray resistance of 500 hours. All platings for the CA-I are environmental friendly and comply to the european RoHS laws.
8
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Stamped ContactsThe CA-I connectors use stamped APK25 – power and T2P – signal contacts. Stamped contacts reduce assembly time of the connector signifi cantly. This is realized by a highly automated crimp process with crimp machines. The insertion of the contacts in the connector is done by a simple and fast snap in without the need of any tool. The CA-I contacts are available in a reeled versions for automated processing with a crimp machine or loose packed for hand crimping and also for smaller quantities.
Power Contacts APK25 Signal Contacts T2P
Tin or gold plating• 200 mating cycles (gold)• 30 Amps• 12 to 20 AWG wires•
Tin or gold plating• 200 mating cycles (gold)• 13 Amps• 14 to 26 AWG wires•
Build up of the CA Industrial Connector
Receptacle
Plug
ShellContacts
Insulator
Shell
Coupling nut
Insulator
Contacts
9
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Part Number Creation
Follow these steps to create your part number
STEP 1 Select shell style, plug or receptacle
Plug Receptacle
Plug Straight................... 06
Plug Straight Shielded.... S6
Plug 90° ...........................08
Plug 90° Shielded............ S8
Wall Mount, Rear Panel connecting thread, thread hole in fl ange
Cable Connecting plug
Wall Mount, Front Panel through hole in fl ange
Wall Mount, Front Panel through hole in fl ange, IP69K
Wall Mount, Rear Panel, thread hole in fl ange
Wall Mount, Front Panel, thread hole in fl ange
00
01
02
x2
20
21
10
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
STEP 2Select Layout / Shell Size
See page 00 for contact layout
selection.
Use shell size, number of power
and signal contacts for yourpart
number.
Example:
Order code: 18-0200
Shell Size 18
Power Contacts 2
Signal Contacts 0
STEP 3Select Endbell
Order Code
STEP 4Select Contact
Order Code
Contact Type
P = Pin
S = Socket
Contact SIze
Contacts must be ordered
seperately.
See Page 00
STEP 5Select Shell Plating
1 = Nickel (A34)
2 = Blue Generation
(Zinc Nickel-A240)
STEP 6Select Modifi cation
Sealing Material:
00 = Standard
01 = FKM
Step 1 2 3 2 2 4 5 6
Part No CAICAI-Series
02 Wall
Mount Receptacle
-18Shell
Size 18
T07Univ.
Endbell,4,5-7,2 mm
-02 2 Power Contacts
000 Signal Contacts
-PPin
Contact
-BBayonet
1Nickel
-00CR
Sealing
Description Connector Series
Shell style Shell size
Endbell No. of contacts power
No. of contacts
signal
Contact type
Bayonet Plating Modifi cation
Adaptor for
PG cable fi t-
ting see page
00 for order
code.
Adaptor for
metric cable
fi tting see
page 00 for
order code.
Adapter for
fl extube see
page 00 for
order code
Without endbell
Universal
Endbell for
system
cables see
page 00 for
order code.
Pxx
Mxx
Fxx
Txx
F00..................................
x
11
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Delete this page.Include the talking dog instead?
12
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Electrical DataCurrent carrying capacityTest according to IEC 60512 test 5b
Example layout 20-0306: Insulators are fully equipped with contacts. For other layouts please. contact factory
a.) Derating of APK25 contact (Power)
Layout 20-0306
Wire size APK: 1,5mm² / 2,5mm² / 4,0mm²
APK25 (Power): All 3 contacts under load
T2P (Signal): not loaded, wire size 1,0mm²
All APK with 1,5mm²: T = 85°C / Imax = 14,8A
All APK with 2,5mm²: T = 85°C / Imax = 19,0A
All APK with 4,0mm²: T = 85°C / Imax = 23,8A
b.) Derating of T2P contact (Signal)
Layout 20-0306
Wire size T2P: 0,5mm² / 1,0mm² / 1,5mm²
APK25 (Power): not loaded, wire size 1,5mm²
T2P (Signal): All 6 contacts under load
All T2P with 0,5mm²: T = 85°C / Imax = 7,0A
All T2P with 1,0mm²: T = 85°C / Imax = 10,0A
All T2P with 1,5mm²: T = 85°C / Imax = 11,8A
c.) Derating of APK25 contact when T2P contact is under load
Layout 20-0306
Wire size APK25: 1,5mm² / 2,5mm² / 4,0mm²
Wire size T2P: 1,5mm²
APK25 (Power): All 3 contacts under load
T2P (Signal): All 6 contacts loaded with 2A
Wire size 1,5mm²
All APK with 1,5mm²: T = 85°C / Imax = 14,8A
All APK with 2,5mm²: T = 85°C / Imax = 19,0A
All APK with 4,0mm²: T = 85°C / Imax = 23,8A
x
x
x
13
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Contact resistanceTest according to IEC 60512, Test 2b
Contact type: Contact resistance max., initially
Contact resistance max.
After mechanical or climatic aging
Signal contact (T2P) 5 mΩ 10 mΩ or 50 % over initial value
Power contact (APK25) 5 mΩ 10 mΩ or 50 % over initial value
Insulation resistanceTest according to IEC 60512-2, Test 3a, Method A
Voltage proof at sea level Test voltage (V DC) Insulation resistance min. (MΩ) at 25°C
Insulation resistance min. (MΩ) at 85°C
Signal line
contact / contact 500 5000 100
contact / shield. 500 5000 100
Power line
Contact / contact 500 5000 100
Contact / housing (shielding) 500 5000 100
Shielding effectivenessTest according to VG95373 part 40
Shielding effectiveness with Universal Endbell
Frequency range 30 kHz-100 MHz
Attenuation min 50 dB
Mechanical Data
Operating TemperatureOperating Temperature
Minimum -55°C
Maximum +125°C
14
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
VibrationTest according to IEC 60068-2-6, Test Fc
Sinusoidal vibration
Frequency range 10-2000 Hz
Amplitude 0,75 mm
AccelerationTin plated T2P contacts: 100 m/s²
Gold plated T2P contacts: 200 m/s²
Duration per axis / axis 8 h / 3
No. of axis* 3
ShockHalf sine shock test according to IEC 60068-2-27, Test Ea: Shock
Shock
Acceleration 500m/s²
Duration 11ms
No. of shocks per directions 3
No. of directions* 6
* In 3 perpendicular directions versus the connector axis
Mechanical operationTest according to IEC 60512-5, Test 9a
Mating cycles of contacts
Tin plated contacts 50
Gold plated contacts 200
Contact retention in insertTest according to IEC 60512, test no. 15a
The contacts in the insert withstand the force specifi ed below.
Type of connector Force
Signal contacts (T2P) 68 N
15
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Power contacts (APK25) 100 N
Sealing PerformanceDepending on the used endbell and receptacle the CA-I connectors fulfi ll IP67, IP68 and IP69k requirements.
Test according to IEC 60529:
IP67: 0,1bar pressure (water depth of 1 m) for 30 min
IP68: 1 bar pressure (water depth of 10 m) for 16 hours
IP69K: A water jet with 100 bar and a Temperature of 80°C is directed from different angles on the connector.
Chemical Resistance of Sealing MaterialCA-I connectors can be equipped with different types of sealing materials.
The chemical resistances of the sealing materials are described in the table below.
For more information about chemical resistances please consult factory.
Sealing Material
Standard (CR) FKM
Silicon oil * *
Air * *
Lower Alcohols * *
Diesel oil *
Cerosin *
Mineral oil *
Deluted Acids *
Deluted Lye *
Synthetic oils *
16
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Layout reference / Contact arrangementCA-I connectors can be equipped with power (APK25) and signal (T2P) contacts. The available contact arrangements are listed in the table below. Layouts with the remark “Consult Factory”and customer specifi c layouts can be offered on request.
Alternate Insert Positions SelectionBesides the normal position further insulator positions are possible to prevent mismatching of connectors. Polarisation is achieved by turning the pin contact insulator clockwise towards the shell, the socket insulator, however, in opposite clockwise direction. The information refers to the mating side of the contact insulator. For ordering use the appropriate letter (N to Z) from the “Alternate insert option” column in the table below.
Contact
ArrangementNumber and Type of
Contacts
Alternate Insert Positions
Nº Wº Xº Yº Zº
18...-0200 2 x APK25 0 35 110 250 325
Consult Factory
18...-0400 4 x APK25 0 - 120 240 -
Available
18...-0500 5 x APK25 0 - 170 265 -
Consult Factory
18...-0300 3 x APK25 0 - - - -
Consult Factory
17
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Contact
ArrangementNumber and Type of
Contacts
Alternate Insert Positions
Nº Wº Xº Yº Zº
18...-0004 4 x T2P 0 35 110 250 325
Consult Factory
18...-0006 6 x T2P 0 80 - - 280
Consult Factory
18...-0010 10 x T2P 0 70 145 - 290
Available
18...-0005 5 x T2P 0 90 180 270
Consult Factory
18...-0003 3 x T2P 0 70 145 215 290
Consult Factory
18...-0201 2 x APK25 / 1 x T2P 0 80 110 250 280
Consult Factory
18
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Contact
ArrangementNumber and Type of
Contacts
Alternate Insert Positions
Nº Wº Xº Yº Zº
18...-0107 1 x APK25 / 7 x T2P 0 70 - - 290
Consult Factory
18...-0205 2 x APK25 / 5 x T2P 0 80 110 250 280
Consult Factory
20...-0300 3 x APK25 0 70 145 215 290
Consult Factory
20...-0400 4 x APK25 0 45 110 250 -
Consult Factory
20...-0700 7 x APK25 0 80 - - 280
Consult Factory
20...-0900 9 x APK25 0 - 110 250 -
Available
19
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
ContactArrangement
Number and Type of Contacts
Alternate Insert Positions
Nº Wº Xº Yº Zº
20...-0003 3 x T2P 0 70 145 215 290
Consult Factory
20...-0008 8 x T2P 0 80 110 250 280
Consult Factory
20...-0013 13 x T2P 0 - - - -
Consult Factory
20...-0014 14 x T2P 0 35 110 250 325
Available
20...-0017 17 x T2P 0 80 - - 280
Available
20...-0010 11 x T2P 0 - - - -
Consult Factory
20
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
ContactArrangement
Number and Type of Contacts
Alternate Insert Positions
Nº Wº Xº Yº Zº
20...-0019 19 x T2P 0 - 80 280 -
Consult Factory
20...-0207 2 x APK25 / 7 x T2P 0 80 110 250 280
20...-0501 5 x APK25 / 1 x T2P 0 90 180 270 -
Available
20...-0306 3 x APK25 / 6 x T2P 0 35 110 250 325
Consult Factory
22...-0200 2 x APK25 0 35 110 250 325
Consult Factory
22...-0300 3 x APK25 0 70 145 215 290
Consult Factory
21
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Contact
ArrangementNumber and Type of
Contacts
Alternate Insert Positions
Nº Wº Xº Yº Zº
22...-0700 7 x APK25 0 80 - - 280
Consult Factory
22...-0800 8 x APK25 0 35 - 250 -
Available
22...-0004 4 x T2P 0 35 110 250 325
Available
22...-0019 19 x T2P 0 80 - - 280
Available
22...-0014 14 x T2P 0 80 110 250 280
Consult Factory
22...-0009 9 x T2P 0 35 110 250 325
Consult Factory
22
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Contact
ArrangementNumber and Type of
Contacts
Alternate Insert Positions
Nº Wº Xº Yº Zº
22...-0204 2 x APK25 / 4 x T2P 0 35 110 250 325
Consult Factory
22...-0501 5 x APK25 / 1 x T2P 0 80 110 250 280
Consult Factory
22...-0306 3 x APK25 / 6 x T2P 0 80 110 250 280
Consult Factory
24...-0700 7 x APK25 0 80 - - 280
Consult Factory
24...-0800 8 x APK25 0 80 110 250 280
Consult Factory
24...-1200 12 x APK25 0 80 100 260 280
Consult Factory
23
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Contact
ArrangementNumber and Type of
Contacts
Alternate Insert Positions
Nº Wº Xº Yº Zº
24...-0016 16 x T2P 0 80 110 250 280
Consult Factory
24...-0012 12 x T2P 0 - - - -
Consult Factory
24...-0007 7 x T2P 0 80 - - 280
Consult Factory
24...-0024 24 x T2P 0 80 110 250 280
Available
24...-0028 28 x T2P 0 65 146 235 -
Available
24...-0214 2 x APK25 / 14 x T2P 0 80 110 250 280
Consult Factory
24
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Contact
ArrangementNumber and Type of
Contacts
Alternate insert positions
Nº Wº Xº Yº Zº
24...-0209 2 x APK25 / 9 x T2P 0 80 110 250 280
Consult Factory
28...-1200 12 x APK25 0 80 135 195 -
Consult Factory
28...-0035 35 x T2P 0 80 110 250 280
Consult Factory
28...-0020 20 x T2P 0 80 110 250 280
Consult Factory
28...-0037 37 x T2P 0 80 110 250 280
Consult Factory
28...-0043 43 x T2P 0 80 110 250 280
Consult Factory
MISSING
IMAGEx
25
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Contact
ArrangementNumber and Type of
Contacts
Alternate insert positions
Nº Wº Xº Yº Zº
28...-0212 2 x APK25 / 12 x T2P 0 35 110 250 325
Consult Factory
28...-0606 6 x APK25 / 6 x T2P 0 80 110 250 280
Consult Factory
28...-0406 4 x APK25 / 6 x T2P 0 80 110 250 280
Consult Factory
28...-0418 4 x APK25 / 18 x T2P 0 80 110 250 280
Consult Factory
28...-1004 10 x APK25 / 4 x T2P 0 80 110 250 280
Consult Factory
28...-0919 9 x APK25 / 19 x T2P 0 - 100 260 -
Available
26
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Contact
ArrangementNumber and Type of
Contacts
Alternate insert positions
Nº Wº Xº Yº Zº
32...-0054 54 x T2P 0 80 110 250 280
Consult Factory
32...-0047 47 x T2P 0 80 110 250 280
Consult Factory
32...-0055 55 x T2P 0 80 110 250 280
Available
32...-0728 7 x APK25 / 28 x T2P 0 80 125 235 280
Available
32...-0624 6 x APK25 / 24 x T2P 0 80 125 235 280
Consult Factory
32...-0518 5 x APK25 / 18 x T2P 0 80 110 250 280
Consult Factory
27
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Contact
ArrangementNumber and Type of
Contacts
Alternate insert positions
Nº Wº Xº Yº Zº
36...-2700 27 x APK25 0 80 110 250 280
Consult Factory
36...-0048 48 x T2P 0 80 125 235 280
Consult Factory
36...-0035 35 x T2P 0 60 125 245 305
Consult Factory
36...-0052 52 x T2P 0 80 110 250 280
Consult Factory
36...-0740 7 x APK25 / 40 x T2P 0 80 110 250 280
Available
36...-0146 1 x APK25 / 46 x T2P 0 80 110 250 280
Consult Factory
28
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Shell StylesWall Mounting Receptacle, Rear Panel Mounting Endbell: none
Shielding: Depending on endbell selection
Sealing (*): Depending on endbell selection
CAI00-T00 Wall mounting receptacle with thread for endbell assembly, threaded holes in fl ange, rear panel mounting.
Part No. A B C D E F G H
-0.15 +0,4 ±0,2 ±0,3 ±0,1 ±0,3
CAI00-18T00-**-*-B 30.8 23.05 4 1-20UNEF-2A 41.85 27.0 35 M4
CAI00-20T00-**-*-B 34.2 23.05 4 1 1/8-18NEF-2A 41.85 29.4 38 M4
CAI00-22T00-**-*-B 37.4 23.05 4 1 1/4-18NEF-2A 41.85 31.8 41 M4
CAI00-24T00-**-*-B 40.9 23.05 4 1 3/4-18NEF-2A 41.85 34.9 44.5 M4
CAI00-28T00-**-*-B 46.7 24.05 4 1 5/8-18NEF-2A 42.85 39.7 50.8 M5
CAI00-32T00-**-*-B 53.4 24.05 4 1 7/8-16N-2A 43 44.5 57 M5
CAI00-36T00-**-*-B 59.6 24.05 4 2 1/8-16N-2A 42.85 49.0 63.5 M5
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
29
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Wall Mounting Receptacle Rear Panel Mounting Endbell: Universal Endbell
Shielding: Yes
Sealing (*): IP67, IP68, IP69K
CAI00-T-B Wall mounting receptacle with thread for endbell assembly, threaded holes in fl ange, Rear Panel Mounting, with Universal Endbell.
Part No. A B C D E F G H I
- 0,15 max + 0,4 ± 0,2 max ± 0,1 ± 0,3 Thread Ø
CAI00-18T11-**-*-B 30.8 24.0 23.05 4,0 92 27.0 35.0 M4 7,0 - 10,3
CAI00-18T13-**-*-B 30.8 27.4 23.05 4,0 90 27.0 35.0 M4 9,0 - 12,5
CAI00-18T14-**-*-B 30.8 30.0 23.05 4,0 90 27.0 35.0 M4 11,5 - 14,2
CAI00-20T07-**-*-B 34.2 17.9 23.05 4,0 93 29.4 38.0 M4 4,5 - 7,2
CAI00-20T09-**-*-B 34.2 21.0 23.05 4,0 92 29.4 38.0 M4 6,5 - 9,3
CAI00-20T11-**-*-B 34.2 24.0 23.05 4,0 95.5 29.4 38.0 M4 8,0 - 10,3
CAI00-20T13-**-*-B 34.2 27.4 23.05 4,0 90 29.4 38.0 M4 9,0 - 12,5
CAI00-20T17-**-*-B 34.2 33.6 23.05 4,0 92 29.4 38.0 M4 14,5 - 16,6
CAI00-22T13-**-*-B 37.4 27.4 23.05 4,0 90 31.8 41.0 M4 9,0 - 12,5
CAI00-22T14-**-*-B 37.4 30.0 23.05 4,0 90 31.8 41.0 M4 11,5 - 14,2
CAI00-22T17-**-*-B 37.4 33.6 23.05 4,0 99 31.8 41.0 M4 14,5 - 16,6
CAI00-28T17-**-*-B 46.7 33.6 24.05 4,0 109 39.7 50.8 M5 14,5 - 16,6
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
30
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Wall Mounting Receptacle, Rear Panel Mounting Endbell: Metric Adaptor
Shielding: Depending on used metric gland
Sealing(*): Depending on used metric gland
CAI00-M-B Wall mounting receptacle wit h thread for endbell assembly, threaded holes in fl ange, rear panel mounting, with adaptor for metric glands (**)
Part No. A B C D E F G H I
- 0,15 + 0,4 ± 0,2 Thread max max ± 0,1 ± 0,3 Thread
CAI00-18M25-**-*-B 30.8 23.05 4,0 M25x1,5 31.0 80 27.0 35.0 M4
CAI00-20M25-**-*-B 34.2 23.05 4,0 M25x1,5 34.0 80 29.4 38.0 M4
CAI00-22M32-**-*-B 37.4 23.05 4,0 M32x1,5 40.0 85 31.8 41.0 M4
CAI00-24M32-**-*-B 40.9 23.05 4,0 M32x1,5 40.0 85 34.9 44.5 M4
CAI00-28M32-**-*-B 46.7 24.05 4,0 M32x1,5 41.0 86 39.7 50.8 M5
CAI00-32M40-**-*-B 53.4 24.05 4,0 M40x1,5 48.5 91 44.5 57.0 M5
CAI00-36M40-**-*-B 59.6 24.05 4,0 M40x1,5 48.5 91 49.2 63.5 M5
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
(**) Metric gland has to be ordered separately.
31
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Wall Mounting Receptacle, Rear Panel Mounting Endbell: PG Adaptor
Shielding: Depending on used PG termination
Sealing: Depending on used PG termination
CAI00-P-B Wall mounting receptacle with thread for endbell assembly, threaded holes in fl ange, rear panel mounting, with adaptor for PG glands
Part No. A B C D E F G H I
- 0,15 Thread max + 0,4 ± 0,2 max ± 0,1 ± 0,3 Thread
CAI00-18P13-**-*-B 30.8 PG13,5 25 23.05 4,0 73 27.0 35.0 M4
CAI00-20P16-**-*-B 34.2 PG16 27 23.05 4,0 74 29.4 38.0 M4
CAI00-22P16-**-*-B 37.4 PG16 27 23.05 4,0 77 31.8 41.0 M4
CAI00-24P16-**-*-B 40.9 PG16 27 23.05 4,0 77 34.9 44.5 M4
CAI00-28P21-**-*-B 46.7 PG21 32 24.05 4,0 78 39.7 50.8 M5
CAI00-32P29-**-*-B 53.4 PG29 41 24.05 4,0 78 44.5 57.0 M5
CAI00-36P29-**-*-B 59.6 PG29 41 24.05 4,0 89 49.2 63.5 M5
(*) Sealing is in mated condition. A plug with the suitable sealing degree is needed
(**) PG gland has to be ordered separately.
32
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Cable Connecting Plug Endbell: none
Shielding: Depending on used Endbell
Sealing (*): Depending on used Endbell
CAI01-T00 Straight plug for cable connection with thread for endbell assembly.
Part No. A B C D E1 E2 F G
-0.15 +0,4 ±0,2 ±0,3 ±0,3 max ±0,2
CAI01-18T00-**-*-B 30.8 23.05 4 1-12UNEF-2A 42.2 41.85 34.8 31.7
CAI01-20T00-**-*-B 34.2 23.05 4 1 1/8-18NEF-2A 42.2 41.85 37.8 34.9
CAI01-22T00-**-*-B 37.4 23.05 4 1 1/4-18NEF-2A 42.2 41.85 41.1 38.1
CAI01-24T00-**-*-B 40.9 23.05 4 1 3/4-18NEF-2A 42.2 41.85 44.6 41.3
CAI01-28T00-**-*-B 46.7 24.05 4 1 5/8-18NEF-2A 42.85 42.85 50.9 47.6
CAI06-32T00-**-*-B 53.4 24.05 4 1 7/8-16N-2A 42.85 42.85 57.1 54
CAI01-36T00-**-*-B 59.6 24.05 4 2 1/8-16N-2A 42.85 42.85 63.6 60.6
(*) Sealing is in mated condition. A plug and with the suitable sealing grade is needed
33
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Cable Connecting, Plug PG Gland Endbell: PG Adaptor
Shielding: Depending on used PG termination Sealing (*): Depending on used PG termination
CAI01-P-B straight plug for cable connection with adaptor for PG glands (**)
Part No. A B C D E F G H
- 0,15 Thread max + 0,4 ± 0,2 max max ± 0,2
CAI01-18P13-**-*-B 30.8 PG13,5 25 23.05 4,0 73 34.8 31.7
CAI01-20P16-**-*-B 34.2 PG16 27 23.05 4,0 74 37.8 34.9
CAI01-22P16-**-*-B 37.4 PG16 27 23.05 4,0 77 41.1 38.1
CAI01-24P16-**-*-B 40.9 PG16 27 23.05 4,0 77 44.6 41.3
CAI01-28P21-**-*-B 46.7 PG21 32 24.05 4,0 78 50.9 47.6
CAI01-32P29-**-*-B 53.4 PG29 41 24.05 4,0 78 57.1 54.0
CAI01-36P29-**-*-B 59.6 PG29 41 24.05 4,0 89 63.6 60.6
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
(**) PG gland has to be ordered separately.
34
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Cable Connecting Plug, Metric Gland Endbell: Metric AdaptorShielding: Depending on used metric gland Sealing (*): Depending on used metric gland
CAI01-M-B straight plug for cable connection with adaptor for metric glands (**)
Part No. A B C D E F G H
- 0,15 + 0,4 ± 0,2 Thread max max max ± 0,2
CAI01-18M25-**-*-B 30.8 23.05 4,0 M25x1,5 31.0 80 34.8 31.7
CAI01-20M25-**-*-B 34.2 23.05 4,0 M25x1,5 34.0 80 37.8 34.9
CAI01-22M32-**-*-B 37.4 23.05 4,0 M32x1,5 40.0 85 41.1 38.1
CAI01-24M32-**-*-B 40.9 23.05 4,0 M32x1,5 40.0 85 44.6 41.3
CAI01-28M32-**-*-B 46.7 24.05 4,0 M32x1,5 41.0 86 50.9 47.6
CAI01-32M40-**-*-B 53.4 24.05 4,0 M40x1,5 48.5 91 57.1 54.0
CAI01-36M40-**-*-B 59.6 24.05 4,0 M40x1,5 48.5 91 63.6 60.6
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
(**) Metric gland has to be ordered separately.
35
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Cable Connecting Plug, Universal Endbell Endbell: Universal Endbell Shielding: Yes
Sealing(*): IP67, IP68, IP69K
CAI01-T-B straight plug for cable connection with Universal Endbell It is important that the diamteter of the cable is in the range of the endbell Diameter H
Part No. A B C D E F G H
- 0,15 max + 0,4 ± 0,2 max max ± 0,2 Ø
CAI01-18T11-**-*-B 30.8 24.0 23.05 4,0 92 34.8 31.7 8,0 - 10,3
CAI01-18T13-**-*-B 30.8 27.4 23.05 4,0 90 34.8 31.7 9,0 - 12,5
CAI01-18T14-**-*-B 30.8 30.0 23.05 4,0 90 34.8 31.7 11,5 - 14,2
CAI01-20T07-**-*-B 34.2 17.9 23.05 4,0 95.5 37.8 34.9 4,5 - 7,2
CAI01-20T09-**-*-B 34.2 21.0 23.05 4,0 92 37.8 34.9 6,5 - 9,3
CAI01-20T11-**-*-B 34.2 24.0 23.05 4,0 95.5 37.8 34.9 8,0 - 10,3
CAI01-20T13-**-*-B 34.2 27.4 23.05 4,0 90 37.8 34.9 9,0 - 12,5
CAI01-20T17-**-*-B 34.2 33.6 23.05 4,0 92 37.8 34.9 14,5 - 16,6
CAI01-22T13-**-*-B 37.4 27.4 23.05 4,0 90 41.1 38.1 9,0 - 12,5
CAI01-22T14-**-*-B 37.4 30.0 23.05 4,0 90 41.1 38.1 11,5 - 14,2
CAI01-22T17-**-*-B 37.4 33.6 23.05 4,0 99 41.1 38.1 14,5 - 16,6
CAI01-28T17-**-*-B 46.7 33.6 24.05 4,0 109 50.9 47.6 14,5 - 16,6
(*) Sealing is in mated condition. A receptacle with the suitable sealing grade is needed
36
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Box mounting receptacle, Front Panel Mounting Endbell: none
Shielding: none
Sealing(*): Mating side(*): IP67, IP68, IP69k
cable side: unsealed
CAIx2-T00 Box mounting receptacle Front panel mounting with O-Ring Sealing for IP69k
Part No. A B C D Socket D Pin E F G H
- 0,15 + 0,4 ± 0,2 ± 0,3 ± 0,5 max ± 0,1 ± 0,3 H13
CAIx2-18T00-**-*-B 30.8 19.0 4.0 33.8 42.0 25.6 27.0 35.0 3.2
CAIx2-20T00-**-*-B 34.2 19.0 4.0 33.8 42.0 29.0 29.4 38.0 3.2
CAIx2-22T00-**-*-B 37.4 19.0 4.0 33.8 42.0 32.2 31.8 41.0 3.2
CAIx2-24T00-**-*-B 40.9 20.6 4.0 33.8 42.0 35.3 34.9 44.5 3.7
CAIx2-28T00-**-*-B 46.7 20.6 4.0 33.8 42.0 41.4 39.7 50.8 3.7
CAIx2-32T00-**-*-B 53.4 22.2 4.0 33.8 42.0 47.8 44.5 57.0 4.3
CAIx2-36T00-**-*-B 59.6 22.2 4.0 33.8 42.0 52.6 49.2 63.5 4.3
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
37
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Box mounting receptacle, Front Panel Mounting Endbell: none
Shielding: none
Sealing (*): Mating side: IP67,
cable side: unsealed
CAI02-T00-B Box mounting receptacle
Front panel mounting
Socket Pin
Part No. A B C D Socket D Pin E F G H
- 0,15 + 0,4 ± 0,2 ± 0,3 ± 0,5 max ± 0,1 ± 0,3 H13
CAI02-18T00-**-*-B 30.8 19.0 4.0 33.8 42.0 25.6 27.0 35.0 3.2
CAI02-20T00-**-*-B 34.2 19.0 4.0 33.8 42.0 29.0 29.4 38.0 3.2
CAI02-22T00-**-*-B 37.4 19.0 4.0 33.8 42.0 32.2 31.8 41.0 3.2
CAI02-24T00-**-*-B 40.9 20.6 4.0 33.8 42.0 35.3 34.9 44.5 3.7
CAI02-28T00-**-*-B 46.7 20.6 4.0 33.8 42.0 41.4 39.7 50.8 3.7
CAI02-32T00-**-*-B 53.4 22.2 4.0 33.8 42.0 47.8 44.5 57.0 4.3
CAI02-36T00-**-*-B 59.6 22.2 4.0 33.8 42.0 52.6 49.2 63.5 4.3
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
38
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Box mounting receptacle, Rear Panel Mounting Endbell: none
Shielding: none
Sealing: Mating side(*): IP67,
cable side: unsealed
CAI20-T00-B Box mounting receptacle
Rear panel mounting with thread hole in fl ange
Pin
Part No. A B C D Socket D Pin E F G H
- 0,15 + 0,4 ± 0,2 ± 0,3 ± 0,5 max ± 0,1 ± 0,3
CAI20-18T00-**-*-B 30.8 23.05 4.0 33.8 41.9 25.6 27.0 35.0 M4
CAI20-20T00-**-*-B 34.2 23,05 4.0 33.8 42.0 29.0 29.4 38.0 M4
CAI20-22T00-**-*-B 37.4 23,05 4.0 33.8 41.9 32.2 31.8 41.0 M4
CAI20-24T00-**-*-B 40.9 23,05 4.0 33.8 41.9 35.3 34.9 44.5 M4
CAI20-28T00-**-*-B 46.7 24,05 4.0 33.8 41.9 41.4 39.7 50.8 M5
CAI20-32T00-**-*-B 53.4 24,05 4.0 33.8 41.9 47.8 44.5 57.0 M5
CAI20-36T00-**-*-B 59.6 24,05 4.0 33.8 41.9 54.1 49.2 63.5 M5
(*) Sealing is in mated condition. A plug with the suitable sealing grade is needed
39
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Straight plug, PG Gland Endbell: PG Adaptor
Shielding: none
Sealing: Depending on used PG gland
CAI06-Pxx-B Straight plug for usage of PG glands (**)
Part No. A B C D
max Thread max max
CAI*6-18P13-**-*-B 36.5 PG13,5 25 69
CAI*6-20P16-**-*-B 39.9 PG16 27 70
CAI*6-22P16-**-*-B 43.1 PG16 27 73
CAI*6-24P16-**-*-B 46.6 PG16 27 74
CAI*6-28P21-**-*-B 53.4 PG21 32 74
CAI*6-32P29-**-*-B 60.1 PG29 41 76
CAI*6-36P29-**-*-B 66.3 PG29 41 87
(*) Sealing is in mated condition. A receptacle with the suitable sealing grade is needed
(**) PG gland has to be ordered separately.
40
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Straight plug, Flex Tube Endbell: Flex tube adaptor
Shielding: none
Sealing (*): IP67, IP68
CAI06-F01-B straight plug with endbell for fl ex tubes.
Part No. A B C D E
max Thread min max
CAI*6-18F01-**-*-B 36.5 16,7 1-20UNEF-2A 9.5 54
CAI*6-20F01-**-*-B 39.9 19,8 1-3/16-18UNEF-2A 9.5 55
CAI*6-22F01-**-*-B 43.1 19,8 1-3/16-18UNEF-2A 9.5 58
CAI*6-24F01-**-*-B 46.6 25,4 1-7/16-18UNEF-2A 9.5 59
CAI*6-28F01-**-*-B 53.4 27,0 1-7/16-18UNEF-2A 9.5 60
CAI*6-32F01-**-*-B 60.1 32,5 1-3/4-18UNS-2A 11.0 62
CAI*6-36F01-**-*-B 66.3 35,7 2-18UNS-2A 11.8 64
(*) Sealing is in mated condition. A receptacle with the suitable sealing grade is needed. Flextube must be sealed.
41
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Straight plug, Metric Gland
Endbell: Metric Adaptor
Shielding: Depending on used metric gland Sealing (*): Depending on used metric gland
CAI06-Mxx-B straight plug for usage of metric glands (**)
Part No. A B C D E F
max - 0,3 Thread max min max
CAI*6-18M25-**-*-B 36.5 23,6 M25x1,5 31.0 11 77
CAI*6-20M25-**-*-B 39.9 26,7 M25x1,5 34.0 11 77
CAI*6-22M32-**-*-B 43.1 29,8 M32x1,5 40.0 12 82
CAI*6-24M32-**-*-B 46.6 33,0 M32x1,5 40.0 12 83
CAI*6-28M32-**-*-B 53.4 38,6 M32x1,5 41.0 12 83
CAI*6-32M40-**-*-B 60.1 44,9 M40x1,5 48.5 12 90
CAI*6-36M40-**-*-B 66.3 50,3 M40x1,5 48.5 12 90
(*) Sealing is in mated condition. A receptacle with the suitable sealing grade is needed
42
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
(**) Metric gland has to be ordered separately.
Straight plug Endbell: none
Shielding: none
Sealing (*): Depending on endbell
CAI06-T00 straight plug with thread for endbell assembly
Part No. A B C1 C2
max Thread
CAI*6-18T00-**-*-B 36.5 1-20UNEF-2A 42.2 37.8
CAI*6-20T00-**-*-B 39.9 1 1/18NEF-2A 42.2 37.8
CAI*6-22T00-**-*-B 43.1 1 1/4-18NEF-2A 42.2 37.8
CAI*6-24T00-**-*-B 46.6 1 3/4-18NEF-2A 42.0 39.4
CAI*6-28T00-**-*-B 53.4 1 5/818NEF-2A 42.2 39.4
CAI*6-32T00-**-*-B 60.1 1 7/8-16-N-2A 42.2 41.0
CAI*6-36T00-**-*-B 66.3 2 1/8-16N-2A 42.2 41.0
(*) Sealing is in mated condition. A receptacle and endbell with the suitable sealing grade is needed
43
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Straight plug, Universal Endbell Endbell: Universal Endbell
Shielding: Yes
Sealing (*): IP67, IP68, IP69K
CAI06-Txx-B straight plug with Universal Endbell
Part No. A B E D
max max Ø
CAI*6-18T11-**-*-B 36.5 88 24.0 8,0 - 10,3 mm
CAI*6-18T13-**-*-B 36.5 88 27.4 9,0 - 12,5 mm
CAI*6-18T14-**-*-B 36.5 88 30.0 11,5 - 14,2 mm
CAI*6-20T07-**-*-B 39.9 92 17.9 4,5 - 7,2 mm
CAI*6-20T09-**-*-B 39.9 92 21.0 6,5 - 9,3 mm
CAI*6-20T11-**-*-B 39.9 92 24.0 8,0 - 10,3 mm
CAI*6-20T13-**-*-B 39.9 92 27.4 9,0 - 12,5 mm
CAI*6-20T17-**-*-B 39.9 92 33.6 14,5 - 16,6 mm
CAI*6-22T13-**-*-B 43.1 98 27.4 9,0 - 12,5 mm
CAI*6-22T14-**-*-B 43.1 98 30.0 11,5 - 14,2 mm
CAI*6-22T17-**-*-B 43.1 98 33.6 14,5 - 16,6 mm
CAI*6-28T17-**-*-B 53.4 105 33.6 14,5 - 16,6 mm
(*) Sealing is in mated condition. A receptacle with the suitable sealing grade is needed
44
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
90° Plug, PG Gland Endbell: PG Adaptor
Shielding: Depending on used PG gland
Sealing (*): Depending on used PG gland
CAI08-Pxx 90° plug
for usage of PG glands (**)
Part No. A B C D E
max -0.3 max
CAI*8-18P16-**-*B 36.5 23.6 77 26.3 PG16
CAI*8-20P21-**-*B 39.9 26.7 82 29.0 PG21
CAI*8-22P21-**-*B 43.1 29.8 82 29.5 PG21
(*) Sealing is in mated condition. A receptacle with the suitable sealing grade is needed (**) PG gland has to be ordered separately.
45
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
ContactsContacts are not part of the connectors Part No. they must be ordered separately.
Power Contacts – APK25 Currant Rating: 30A (see derating)Wire Size 0,50 mm² - 4,00 mm²
- Tin plated
- 50 mating cycles
- wide range of wire sizes
Part Number
WireRange mm2
WireSize Contact Description*
Loose(100 )
Tin Plated
Reeled(3000)
Tin PlatedInsulationDiameter Strip Length
0,05 - 1,00 20-18 AWG Pin APK-PB25A10 031-8717-020 121668-0000 1,40 (.055) - 2,00 (.078) 5,00 (.196±0.25 (.009)
0,05 - 1,00 20-18 AWG Socket APK-SB25A10 031-8717-120 121668-0100 1,40 (.055) - 2,00 (.078) 5,00 (.196±0.25 (.009)
1,50 - 2,50 20-18 AWG Pin APK-PB25A25 031-8717-021 121668-0001 2,00 (.078) - 2,90 (.078) 5,00 (.196±0.25 (.009)
1,50 - 2,50 20-18 AWG Pin APK-PB25A15 031-8717-121 121668-0101 2,00 (.078) - 2,90 (.078) 5,00 (.196±0.25 (.009)
2,50 - 4,00 20-18 AWG Pin APK-PB25A40 031-8717-022 121668-0002 2,90 (.114) - 3,60 (.078) 5,00 (.196±0.25 (.009)
2,50 - 4,00 20-18 AWG Pin APK-PB25A40 031-8717-122 121668-0102 2,90 (.114) - 3,60 (.078) 5,00 (.196±0.25 (.009)
46
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Signal Contacts – T2P Currant Rating: 13A standard, 16A high conductivity (see derating)
Wire Size 0,50 mm² - 4,00 mm²
• Three plating styles available.• Up to 200 mating cycles.• Wide Range of wire sizes.
Formed (Stamped) Crimp Contacts - Standard Brass Material
Part Number Pack (100) Part Number Reeled (3000)
1um (40 u in.) 1um (40 u in.)
WireRange mm2
WireSize Contact
TinPlating
Gold Flash
Gold Plating
TinPlating
GoldFlash
Gold Plating Diameter
StripLength
0,14 - 0,25 26-24 AWG Pin 192990-0020 192990-0080 192900-0448 192990-0020 192990-0080 192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
0,14 - 0,25 26-24 AWG Socket 192990-0030 192990-0090 192900-0452 192990-0020 192990-0080 192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
0,32 - 0,50 22-20 AWG Socket 192990-0040 192922-1460 192900-0447 192990-0020 192990-0080 192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
0,32 - 0,50 22-20 AWG Socket 192990-0050 192922-1470 192900-0451 192990-0020 192990-0080 192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
0,75 - 1,50 26-24 AWG Pin 192990-0060 192990-0100 192900-0446 192990-0020 192990-0080 192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
0,75 - 1,50 26-24 AWG Sicket 192990-0070 192990-0110 192900-0450 192990-0020 192990-0080 192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
0,50 - 2,50 16-14 AWG Pin 192990-1240 192990-1220 192900-0445 192990-0020 192990-0080 192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
0,50 - 2,50 16-14 AWG Socket 192990-1250 192990-1230 192900-0449 192990-0020 192990-0080 192900-0448 0,89 (.035)-1,58 (.062) 3,95 (.155)±0,25(009)
47
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Acessories
Crimp ToolsCrimp Press Mecal TTEquipped with the suitable mini applicator the TT Crimp Press can be used for crimping T2P, APK25 and other contacts. The TT Crimping Press is available either in semi-automatic (for bench-top use) confi guration or in full automatic confi guration with integrated cut and strip machine (optional). The TT accepts all the mini-style applicators fi tted with the standard T-coupling. CFA - crimp force analyser can be fi tted as an option. The semi-automatic confi guration (for bench top use) always includes safety cover, reel arm, foot switch according to the international safety standard and CE regulation.
POWER 0.55 Kw (0.75 HP)
FORCE 2000 Kg (4450 lb)
STROKE 40 mm (1.57’’)
CRIMPING HEIGHT (Bottom Dead Center) 135.8 mm (5.34’’) 135.8 mm (5.34’’)
WEIGHT 41 Kg (95.6 lb)
DIMENSION (mm) W 200 x H 580 x D 300
Nomenclature Description Part Number
Basic - press -TT Crimp Machine 121586-5225
Crimp Tool Mini Applicator WWZ-EVSMini Applicators are interchangeable modules that will fi t into many standard crimping machines like the Mecal TT. They are available for all sizes of stamped signal and power contacts.
Wire size Contacts Description Part Number
0,14-0,50 mm² T2P WWZ – EVS 121586-5239
0,75-1,50 mm² T2P WWZ – EVS 121586-5217
1,50-2,50 mm² T2P WWZ – EVS 121586-5240
0,50-1,00 mm² APK 25 WWZ – 20.100 121586-5128
1,50-2,50 mm² APK 25 WWZ – 20.100 121586-5129
2,50-4,00 mm² APK 25 WWZ – 20.100 121586-5130
48
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Ratcheted Hand ToolA range of single action, factory calibrated tools are available to support the signal (T2P) and power contacts (APK25) for the CA-I connector series.
Signal Contact Power Contact Part Number
14-16 AWG N/A *
14-18 AWG N/A 121586-5237
20-22, 24-26 AWG N/A 121586-5236
N/A 14-16, 18-20 AWG 112108-0012
*For details please consult factory.
Contact Removal ToolsContacts can readily removed from the housings using an extraction tool.
Removal tool for Signal contacts T2P: The tool is placed over the contact and the sleeve rotated slightly as it is pushed home to release the spring. Light pressure on the knob then ejects the contact from the rear of the housing.
Nomenclature Description Part Number
Removal Tool T2P Contact Removal Tool for T2P 192922-1450
Removal tool for Power contacts APK25: The tool is placed over the contact and is pushed to release the spring.
Nomenclature Description Part Number
Removal Tool APK25 Contact Removal Tool for APK25 121086-3278
Testing GaugeThe Testing Gauge will be helpful to check whether a crimp is ok or not. The contact should be inserted into the fi xture without scratching the test hole (diameter 3.3 mm)
Nomenclature Description Part Number
Testing Gauge Testing Gauge for Crimp 317-8675-133
49
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Assembly InstructionsPreparation of cableStripping cable for T2P pin contact The recommended stripping length of the stamped pin and socket contact is 4, 5+/-0,3mm. The stripping of cable is carried out with relevant stripping unit. Thereby the wire strands must not be damaged.
Stripping cable for APK25 pin contactThe recommended stripping length of the stamped pin and socket contact is 5, 3+/-0,3mm. The stripping of cable is carried out with relevant stripping unit. Thereby the wire strands must not be damaged.
Crimping Contact with hand tools:
1.) Strip wires to length (see Stripping Cables)
2.) Open hand tool and insert the contact in the selected crimp profi le
3.) Position the stripped cable in the contact
4.) Press hand tool to end position
5.) Open hand tool and extract the contact, check the contact visually
-there shall be no loose strands out of the crimp section
-the contact must be crimped straight to the cable
-deformed contacts must not be used.
Comments:
Insulation of cable
Wire strands
Contact
Crimping contacts with automatic crimp press
The stamped contacts can be crimped with Hand tool or Mini-applicator (see Crimp Tool Mini Applicator). For crimping instructions consult factory.
50
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Stripping, shielded cable system
The stripping length for shielded cable has to be determined that the shielded cable is inside of the grounding ring after assembly. The stripping of cable is carried out with relevant stripping unit. Thereby the shielding braid must not be damaged.
The recommended stripping length for shielded braid is 40mm.
Crimping contacts to shielded cable system
Turn over braid and remove the protective foil if available.
Fix the shielding braid with tape for easier assemblystripping single cables and crimp the contacts as described in the contact assembly instruction.
Assembly of connectorInsert of pin and socket contacts:The stamped contacts are pushed by hand into the cavity from the rear side of the connector An insertion tool is not required. A “click” indicates that the contact is in the fi nal position.
The contact can not be pulled back. Forwards the contact position is defi ned by a shoulder inside the insulator.
Assembly of EndbellAssembly Instructions for the endbell can be found in the specifi c assembly instruction of the endbell.Please consult factory.
PIN: SOCKET:
PIN: SOCKET:
51
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Part Number Index026-0450-000 ......................16026-0451-000 ......................16029-0262-000 ......................16029-0263-000 ......................16029-8514-000 ......................16029-8514-001 ......................16029-8514-004 ......................16031-8703-000 ................14, 17031-8703-001 ................14, 17031-8703-050 ..........14, 19, 20031-8703-051 ..........14, 19, 20031-8703-052 ............9, 19, 20031-8703-054 ................19, 20031-8703-055 ................19, 20031-8703-100 ..................9, 17066-8516-000 ......................14066-8516-002 ......................14120090-0114 ........................19120-8551-000 ......................13120-8551-001 ......................13120-8551-002 ......................13120-8551-005 ......................13120-8551-006 ......................13120-8551-007 ......................13120-8551-100 ........................8120-8551-101 ........................8120-8551-102 ........................8120-8551-308 ......................13120-8551-309 ....................309120-8551-310 ....................310120-8552-000 ......................11120-8552-001 ......................11120-8552-002 ......................11120-8552-005 ......................11120-8552-006 ......................11120-8552-007 ......................11120-8552-100 ........................8120-8552-101 ........................8120-8552-102 ........................8120-8552-200 ......................12120-8552-201 ......................12120-8552-202 ......................12120-8552-305 ......................12120-8552-306 ......................12120-8552-307 ......................12120-8552-308 ......................11120-8552-309 ......................11120-8552-310 ......................11121086-3019 ........................22121086-3020 ........................22121086-3021 ........................22
121086-3022 ........................22121086-3023 ........................23121086-3025 ........................23121086-3056 ........................22121086-3057 ........................22121086-3058 ........................22121086-3059 ........................22121086-3077 ........................22121086-3078 ........................22121086-3097 ........................25121086-3098 ........................25121086-3099 ........................25121086-3179 ........................25121086-3189 ........................25121086-3191 ........................25121086-3192 ........................25121086-3202 ........................23121086-3203 ........................23121086-3207 ........................25121086-3210 ........................24121086-3225 ........................17121086-3226 ........................25121086-3228 ........................25121086-3229 ........................25121086-3232 ........................25121347-0010 ........................14121347-0020 ........................14121348-0010 ........................14121348-0020 ........................14121347-0100 ..........................9121348-0100 ..........................9121586-0074 ........................23121586-0076 ........................23121586-0080 ........................22121586-0085 ........................17121586-0121 ........................25121586-0122 ........................25121586-0123 ........................25121586-0124 ........................25121586-5067 ........................19121586-5068 ........................19121568-5069 ........................19121586-5214 ........................18121586-5215 ........................18121586-5216 ........................18121586-5225 ........................18121586-5229 ........................26195-8508-000 ......................22195-8508-001 ......................22195-8508-002 ......................22195-8508-003 ......................22
195-8508-004 ......................22195-8508-005 ......................22195-8508-006 ......................22195-8508-007 ......................22195-8508-008 ......................22195-8508-009 ......................22195-8508-013 ......................22195-8508-014 ......................22195-8508-015 ......................22195-8508-016 ......................22195-8508-017 ......................22195-8508-018 ......................22204-8501-002 ......................23225-0093-000 ......................14225-1012-000........................ 9252-7015-003 ......................26317-1397-000 ......................15317-1398-000 ......................15317-1399-000 ......................15317-8588-000 ......................23317-8657-000 ......................15317-8657-002 ......................15317-8666-002 ......................23317-8666-005 ..................9, 23317-8666-007 ......................23330-8672-000 ................14, 17330-8672-001 ................14, 17330-8672-002 ..........14, 19, 20330-8672-003 ..........14, 19, 20330-8672-005 ................19, 20330-8672-008 ................19, 20330-8672-009................19 , 20330-8672-100 ..................9, 17351-1633-000 ......................15351-1634-000 ......................15351-1640-000 ......................15351-1641-000 ......................15970-8606-022 ......................26995-0001-585 ......................19WWZ-EVS-MSS ......................18WWZ-EVS-SS-10 ....................18WWZ-EVS-SS-20 ....................18
52
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
Product Safety & WarrantyTHIS NOTE MUST BE READ IN CONJUNCTION WITH THE PRODUCT DATA SHEET/CATALOG. FAILURE TO OBSERVE THE ADVICE IN THIS INFORMATION SHEET AND THE OPERATING CONDITIONS SPECIFIED IN THE PRODUCT DATA SHEET/ CATALOG COULD RESULT IN HAZARDOUS SITUATIONS.
1. MATERIAL CONTENT AND PHYSICAL FORM
Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups.
a) Printed circuit types and low cost audio types which employ all plastic insulators and casings.
b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either: Copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specifi ed.
2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD
There is no fi re hazard when the connector is correctly wired and used within the specifi ed parameters. Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fl uids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must not be broken by separating mated connectors as this may cause arcing, ionization and burning. Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the product Data Sheet/Catalog are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifi es by further increasing the local resistance through loss of temper of spring contacts, formation of oxide fi lm on contacts and wires and leakage currents through carbonization of insulation and tracking paths. Fire can then result in the presence
of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components.
3. HANDLING
Care must be taken to avoid damage
to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fi ngers. Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged.
4.DISPOSAL
Incineration of certain materials may release noxious or even toxic fumes.
5.APPLICATION
Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages cannot be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Circuit resistance and continuity check should be made to make certain that there are no high resistance joints or spurious conducting paths. Always use the correct application tools as specifi ed in the Data Sheet/Catalog. Do not permit untrained personnel to wire, assemble or tamper with connectors. For operation voltage please see appropriate national regulations.
IMPORTANT GENERAL INFORMATION
(i) Air and creepage paths/Operating voltage. The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations.
For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to
PC board and/or harnessing.
(ii) Temperature
All information given are temperature limits. The operation temperature depends on the individual application.
(iii) Other important information
Cannon continuously endeavors to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalog and data sheets.
“Engineered for life” is a registered trademark of ITT Industries, ©2005. All other trademarks or registered trademarks are property of their respective owners. All data subject to change without notice.
Product Warranty
ITT Cannon, a Division of ITT Industries, Inc. manufactures the highest quality products available in the marketplace; however these products are intended to be used in accordance with the specifi cations in this publication. Any use or application that deviates from the stated operating specifi cations is not recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part of Cannon. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to Cannon products. Except for obligations assumed by Cannon under this warranty, Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confi rmation form; the same applies to orders based on development samples delivered. This publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, Cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this publication is generally permitted, indicating the source. However, Cannon‘s prior consent must be obtained in all cases.
53
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
ITT’s Control Technologies business has a global and extensive portfolio of products in the energy absorption, motion control, aerospace and general industrial markets. Products include: aerospace fuel, hydraulic and other fl uid valves, actuators, switches, pumps; aircraft seat controllers/actuators, seat locks, stowage bin dampers, interior vibration and acoustic isolators; defense weapon shock management systems; missile control dampers and vibration isolators; plasma shape-cutting products, servo motors, drives; alternative fuel products; industrial shock absorbers, heavy equipment isolators, temp/pressure switches, regulators and actuators.
ITT’s Industrial Process is a dynamic business that is growing and expanding globally and has an extensive portfolio of leading edge technology in pumping systems, valves, control systems and services that has served customers in the oil and gas, mining, chemical, power generation, biopharm, general industries markets and more for more than 160 years. The Industrial Process product lines include: pumps, valves, monitoring and control systems, water treatment, and aftermarket services for the chemical, oil and gas, mining, pulp and paper, power, and biopharmaceutical markets.
ITT’s Motion Technologies business develops, produces and sells brake pads and friction materials for private and public transportation markets and all the major transportation manufacturing industries around the world. It also makes high-quality and performance hydraulic shock absorbers and suspension systems for street and racing cars, heavy and light trucks, trailers, rail and industrial applications. It is also a leading supplier of technological innovations in R&D services. Its products include: shock absorbers, brake pads and friction materials for the automotive and rail markets.
ITT providing a comprehensive offering of connectivity solutions. In addition to connector products, we provide a complete line of Aerospace Controls, Industrial Process Products, and Motion & Control Products.
Control Technologies
Industrial Process
Motion Technologies
54
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change
55
Cannon CA Industrial
www.ittcannon.com
Dimensions shown in mmSpecifi cations and dimensions subject to change