C900 PRESSURE PIPE - Northern Pipe · Northern Pipe Products PVC ANSI/AWWA C900 PVC Pressure Pipe...
Transcript of C900 PRESSURE PIPE - Northern Pipe · Northern Pipe Products PVC ANSI/AWWA C900 PVC Pressure Pipe...
C 9 0 0 P R E S S U R E P I P E • S E W E R P I P E • I P S P R E S S U R E P I P E • W E L L C A S I N G • D R A I N W A S T E V E N T
www.northernpipe.com
northern pipe products
Table of Contents
uC900
uGASKETED SEWER PIPE
ANSI/AWWA C900 Water Distribution Pipe
Pipe Specifications....................................4
Gasketed Joint Specifications....................5
ANSI/AWWA C900 Water Transmission Pipe
Pipe Specifications....................................6
Gasketed Joint Specifications....................7
Truckload Data
Truckload Data.........................................8
PVC Gravity Sewer Pipe
Gasketed Pipe Specifications.....................9
Gasketed Joint Specifications....................10
Truckload Data..........................................11
u IPS PRESSURE PIPEASTM D2241 Pressure Pipe
Gasketed Pipe Specifications.....................12
Gasketed Joint Specifications....................13
Solvent Weld Pipe Specifications................14
Schedule 40 Pressure Pipe
Solvent Weld Pipe Specifications................15
IPS Pressure Pipe
Solvent Weld Pipe Joint Specifications........16
Truckload Data..........................................17
uWELL CASING
uDRAIN WASTE VENT
ASTM F480 Well Casing Pipe
Pipe Specifications....................................18
Solvent Weld Pipe Joint Specifications........20
ASTM D2665 Schedule 40 Drain Waste Vent
Pipe Specifications....................................21
uBELL END SEWER PIPEPVC Gravity Sewer Pipe
Bell End Sewer Pipe Specifications.............22
Perforation Specifications...........................23
C900
May-2015 | 1302 39th St NW, Fargo, ND 58102 | 701-282-7655 | 800-747-7655 | Fax: 701-282-28874
uANSI/AWWA C900 WATER DISTRIBUTION PIPE | Pipe Specifications (4" - 12")
Northern Pipe Products PVC ANSI/AWWA C900 PVC Pressure Pipe is manufactured from compounds conforming to cell classification of 12454 as defined in ASTM D1784. The pipe meets the requirements of the ANSI/AWWA C900 standard specification for polyvinyl chloride water distribution pipe. The integral bell joint system meets the requirements of ASTM D3139 and utilizes an elastomeric seal meeting the specification defined in ASTM F477.
Northern Pipe Products ANSI/AWWA C900 pressure pipe for potable water carries: • NSF Standard 14 and NSF Standard 61 listings (marked "NSF-PW-G") • Certification under NSF/ANSI 327 Annex G "lead-free" (marked "NSF-PW-G") • Underwriters Laboratories Inc. Standard 1285 mark of acceptance • Canadian Standards Association Standard B137.3 mark of acceptance
ANSI/AWWA C900 (4" - 12") DR-18 and DR-14 distribution pipe carries the Factory Mutual Research Water Distribution Pipe for Underground Fire Protection Service mark of acceptance.
The pipe is furnished in 20’ laying lengths.
uANSI/AWWA C900 | Cell Classification 12454
NOMINAL PIPE SIZE
(IN.)
PIPE OUTSIDEDIAMETER
(IN.)
DR-25 (165 PSI) DR-18 (235 PSI) DR-14 (305 PSI)
MINIMUM WALL (IN.)
POUNDSPER FOOT
MINIMUM WALL (IN.)
POUNDSPER FOOT
MINIMUM WALL (IN.)
POUNDSPER FOOT
4" 4.80" .192" 1.87 lbs. .267" 2.55 lbs. .343" 3.22 lbs.
6" 6.90" .276" 3.90 lbs. .383" 5.29 lbs. .493" 6.70 lbs.
8" 9.05" .362" 6.69 lbs. .503" 9.15 lbs. .646" 11.55 lbs.
10" 11.10" .444" 10.11 lbs. .617" 13.82 lbs. .793" 17.46 lbs.
12" 13.20" .528" 14.32 lbs. .733" 19.56 lbs. .943" 24.75 lbs.
C900
5www.northernpipe.com
uANSI/AWWA C900 WATER DISTRIBUTION PIPE | Gasketed Joint Specifications (4" - 12")
Northern Pipe Products PVC gasketed ANSI/AWWA C900 PVC potable water distribution pipe is manufactured with gasketed joints conforming to the specifications of ASTM D3139. The gaskets are manufactured to conform to the requirements of ASTM F477. Northern Pipe Products employs the Rieber Gasket System. The Rieber joining system is a factory made “locked-in” flexible elastomeric seal. The gasket is installed in the bell race during the manufacture of the joint. It should not be removed for any reason, as destruction of the joint will occur.
u LOCKED-IN GASKET JOINT
NOMINALPIPE SIZE
(IN.)
DIMENSIONS (IN.)
(A)GASKET GROOVE (RACE) OUTSIDE
DIAMETER
(B)LIP LENGTH
(C)GASKET GROOVE(RACE) LENGTH
(D)OVERALL JOINT
(E)SPIGOT INSERTION
DEPTH
4" 6.50" 1.500" 1.125" 6.000" 5.000"
6" 9.00" 1.750" 1.250" 6.500" 5.500"
8" 11.50" 2.000" 1.500" 7.500" 6.500"
10" 14.00" 2.500" 1.750" 8.750" 7.750"
12" 16.50" 3.000" 1.875" 9.750" 8.750"
A. Gasket Groove (Race) Outside DiameterB. Lip LengthC. Gasket Groove (Race) LengthD. Overall JointE. Spigot Insertion Depth
B CD
E
A
C900
May-2015 | 1302 39th St NW, Fargo, ND 58102 | 701-282-7655 | 800-747-7655 | Fax: 701-282-28876
uANSI/AWWA C900 WATER TRANSMISSION PIPE | Pipe Specifications (14" - 24") (Previously C905)
Northern Pipe Products PVC ANSI/AWWA C900 PVC Water Transmission Pipe is manufactured from compounds conforming to cell classification of 12454 as defined in ASTM D1784. The pipe meets the requirements of the ANSI/AWWA C900 standard specification for polyvinyl chloride water transmission pipe. The integral bell joint system meets the requirements of ASTM D3139 and utilizes an elastomeric seal meeting the specification defined in ASTM F477.
Northern Pipe Products ANSI/AWWA C900 pressure pipe for potable water carries: • NSF Standard 14 and NSF Standard 61 listings (marked "NSF-PW-G") • Certification under NSF/ANSI 327 Annex G "lead-free" (marked "NSF-PW-G") • Underwriters Laboratories Inc. Standard 1285 mark of acceptance • Canadian Standards Association Standard B137.3 mark of acceptance
14” and 16” diameter DR-25 and DR-18 transmission pipe carries the Factory Mutual Research Water Distribution Pipe for Underground Fire Protection Service mark of acceptance.
The pipe is furnished in 20’ laying lengths.
uANSI/AWWA C900 | Cell Classification 12454
NOMINAL PIPE SIZE
(IN.)
PIPE OUTSIDE
DIAMETER(IN.)
DR-25 (165 PSI) DR-21 (200 PSI) DR-18 (235 PSI) DR-14 (305 PSI)
MINIMUM WALL (IN.)
POUNDS PER FOOT
MINIMUM WALL (IN.)
POUNDS PER FOOT
MINIMUM WALL (IN.)
POUNDS PER FOOT
MINIMUM WALL (IN.)
POUNDS PER FOOT
14" 15.30" .612" 19.35 lbs. .729" 22.90 lbs. .850" 26.50 lbs. 1.093" 33.70 lbs.
16" 17.40" .696" 25.20 lbs. .829" 29.70 lbs. .967" 34.50 lbs. 1.243" 43.70 lbs.
18" 19.50" .780" 31.65 lbs. .929" 37.50 lbs. 1.083" 43.40 lbs. 1.393" 54.90 lbs.
20" 21.60" .864" 39.00 lbs. 1.029" 46.10 lbs. 1.200" 53.50 lbs. 1.543" 67.65 lbs.
24" 25.80" 1.032" 56.00 lbs. 1.229" 65.60 lbs. 1.433" 76.50 lbs. N/A N/A
C900
7www.northernpipe.com
uANSI/AWWA C900 WATER TRANSMISSION PIPE | Gasketed Joint Specifications (14" - 24")
Northern Pipe Products PVC gasketed ANSI/AWWA C900 PVC water transmission pipe is manufactured with gasketed joints conforming to the specifications of ASTM D3139. The rubber gaskets are manufactured to conform to the requirements of ASTM F477. Northern Pipe Products employs the Rieber Gasket System. The Rieber joining system is a factory made “locked-in” flexible elastomeric seal. The gasket is installed in the bell race during the manufacture of the joint. It should not be removed for any reason, as destruction of the joint will occur.
u LOCKED-IN GASKET JOINT
NOMINALPIPE SIZE
(IN.)
DIMENSIONS (IN.)
(A)GASKET GROOVE (RACE) OUTSIDE
DIAMETER
(B)LIP LENGTH
(C)GASKET GROOVE(RACE) LENGTH
(D)OVERALL JOINT
(E)SPIGOT INSERTION
DEPTH
14" 18.25" 3.00" 2.00" 10.00" 9.00"
16" 20.50" 3.00" 2.25" 10.00" 9.00"
18" 23.25" 3.50" 2.44" 11.25" 10.25"
20" 25.60" 3.50" 2.70" 11.25" 10.25"
24" 30.25" 3.50" 3.00" 11.25" 10.25"
A. Gasket Groove (Race) Outside DiameterB. Lip LengthC. Gasket Groove (Race) LengthD. Overall JointE. Spigot Insertion Depth
B CD
E
A
C900
May-2015 | 1302 39th St N, Fargo, ND 58102 | 701-282-7655 | 800-747-7655 | Fax: 701-282-28878
uC900 | Truckload Data
NOMINAL PIPE SIZE (IN.)
PIPE OUTSIDE DIAMETER (IN.)
FEET PERPALLET
PIECES PERPALLET
FEET PERTRUCKLOAD
4" 4.80" 580' 29 pcs. 16,240'
6" 6.90" 560' 28 pcs. 6,720'
8" 9.05" 200' 10 pcs. 4,000'
10" 11.10" 240' 12 pcs. 2,880'
12" 13.20" 120'/160' 6 pcs./8 pcs. 1,960'
14" 15.30" 120' 6 pcs. 1,440'
16" 17.40" 40'/60' 2 pcs./3 pcs. 1,000'
18" 19.50" 60'/80' 3 pcs./4 pcs. 800'
20" 21.60" 80' 4 pcs. 640'
24" 25.80" 60' 3 pcs. 360'
Gasketed Sewer Pipe
9www.northernpipe.com
uPVC GRAVITY SEWER PIPE | Gasketed Pipe Specifications
Northern Pipe Products PVC Gasketed Sewer Pipe 4” through 15” meets all dimensional and physical specifications of ASTM D3034. 18” through 24” sewer pipe meets all dimensional and physical specifications of ASTM F679. 4” through 24” SDR-35 sewer pipe products are available with the CSA (Canadian Standards Association) mark of acceptance. All Gasketed Sewer Pipe is manufactured to laying lengths.
uASTM D3034 | Gasketed Sewer Pipe
NOMINAL PIPE SIZE
(IN.)
PIPE OUTSIDEDIAMETER
(IN.)
SDR-35 (PS 46) SDR-26 (PS 115)
MINIMUM WALL(IN.)
POUNDS PER FOOTMINIMUM
WALL(IN.)
POUNDS PER FOOT
14’LENGTH
20’LENGTH
14’LENGTH
20’LENGTH
4” 4.215" .120" 1.04 lbs. 1.03 lbs. .162" 1.38 lbs. 1.36 lbs.
6” 6.275" .180" 2.32 lbs. 2.30 lbs. .241" 3.08 lbs. 3.06 lbs.
8” 8.400" .240" 4.18 lbs. 4.13 lbs. .323" 5.57 lbs. 5.50 lbs.
10” 10.500" .300" 6.55 lbs. 6.46 lbs. .404" 8.74 lbs. 8.64 lbs.
12” 12.500" .360" 9.36 lbs. 9.22 lbs. .481" 12.41 lbs. 12.28 lbs.
15” 15.300" .437" 13.97 lbs. 13.75 lbs. .588" 18.65 lbs. 18.40 lbs.
Note: 4” and 6” diameter SDR-28 with the Canadian Standards Association mark of acceptance is available on special order.
uASTM F679 | Gasketed Sewer Pipe
NOMINAL PIPE SIZE
(IN.)
PIPE OUTSIDEDIAMETER
(IN.)
SDR-35 (PS 46) SDR-26 (PS 115)
MINIMUM WALL(IN.)
POUNDS PER FOOTMINIMUM
WALL(IN.)
POUNDS PER FOOT
14’LENGTH
20’LENGTH
14’LENGTH
20’LENGTH
18" 18.701" .536" 21.03 lbs. 20.70 lbs. .720" 27.90 lbs. 27.51 lbs.
21" 22.047" .632" 29.62 lbs. N/A .849" 39.40 lbs. N/A
24" 24.803" .709" 37.40 lbs. N/A .954" 49.80 lbs. N/A
Gasketed Sewer Pipe
May-2015 | 1302 39th St NW, Fargo, ND 58102 | 701-282-7655 | 800-747-7655 | Fax: 701-282-288710
uPVC GRAVITY SEWER PIPE | Gasketed Joint Specifications
Northern Pipe Products PVC Gasketed Sewer Pipe is manufactured with gasketed joints conforming to ASTM D3212. The rubber gaskets are manufactured to conform to the requirements of ASTM F477 (Standard Specification for Elastomeric Seals for Joining Plastic Pipe). Northern Pipe Products employs the Rieber Gasket System. The Rieber joining system is a factory made “locked-in” flexible elastomeric seal. The gasket is installed in the bell race during manufacture of the joint. It should not be removed for any reason, destruction of the joint occurs.
u LOCKED-IN GASKET JOINT
NOMINALPIPE SIZE
(IN.)
DIMENSIONS (IN.)
(A)GASKET GROOVE (RACE) OUTSIDE
DIAMETER
(B)LIP LENGTH
(C)GASKET GROOVE(RACE) LENGTH
(D)OVERALL JOINT
(E)SPIGOT INSERTION
DEPTH
4" 5.300" 1.000" .750" 4.000" 3.000"
6" 7.500" 1.250" .875" 4.250" 3.250"
8" 10.000" 1.500" .875" 5.625" 4.625"
10" 12.350" 1.500" 1.000" 6.250" 5.250"
12" 14.500" 1.500" 1.125" 6.375" 5.375"
15" 17.500" 1.750" 1.400" 7.000" 6.000"
18" 21.125" 2.000" 1.500" 7.500" 6.500"
21" 24.750" 3.000" 1.725" 10.000" 9.000"
24" 27.750" 3.000" 1.900" 10.000" 9.000"
A. Gasket Groove (Race) Outside DiameterB. Lip LengthC. Gasket Groove (Race) LengthD. Overall JointE. Spigot Insertion Depth
B CD
E
A
Gasketed Sewer Pipe
11www.northernpipe.com
uPVC GRAVITY SEWER PIPE | Gasketed Pipe Truckload Data
NOMINAL PIPE SIZE (IN.)
PIPE OUTSIDEDIAMETER (IN.)
LENGTH (FT.)PIECES PER
PALLETFEET PERPALLET
FEET PERTRUCKLOAD
4" 4.215" 14' 63 pcs. 882' 21,168'
4" 4.215" 20' 63 pcs. 1,260' 20,160'
6" 6.275" 14' 40 pcs. 560' 10,080'
6" 6.275" 20' 40 pcs. 800' 9,600'
8" 8.400" 14' 24 pcs. 336' 6,048'
8" 8.400" 20' 24 pcs. 480' 5,760'
10" 10.500" 14' 12 pcs./15 pcs. 168'/210' 3,402'
10" 10.500" 20' 12 pcs./15 pcs. 240'/300' 3,240'
12" 12.500" 14' 4 pcs./8 pcs. 56'/112' 2,352'
12" 12.500" 20' 4 pcs./8 pcs. 80'/160' 2,240'
15" 15.300" 14' 6 pcs. 84' 1,512'
15" 15.300" 20' 6 pcs. 120' 1,440'
18" 18.701" 14' 2 pcs./3 pcs. 28'/42' 1,050'
18" 18.701" 20' 2 pcs./3 pcs. 40'/60' 1,000'
21" 22.047" 14' 4 pcs. 56' 672'
24" 24.803" 14' 4 pcs. 56' 672'
May-2015 | 1302 39th St NW, Fargo, ND 58102 | 701-282-7655 | 800-747-7655 | Fax: 701-282-288712
IPS Pressure Pipe
uASTM D2241 PRESSURE PIPE | Gasketed Pipe Specifications
Northern Pipe Products ASTM D2241 IPS Pressure Rated Pipe is manufactured from compounds conforming to cell class 12454 in accordance with ASTM D1784. Pipe 1.5” through 12” is made with an integral bell joining system which meets ASTM D3139 and utilizes an elastomeric seal meeting the specification defined in ASTM F477. Northern Pipe Products Pressure Pipe for potable water carries the NSF Standard 14 and NSF Standard 61, NSF/ANSI 372 Annex G "lead-free" and the CSA (Canadian Standards Association) marks of acceptance. It is manufactured in 20’ and 40’ laying lengths.
uASTM D2241 GASKETED IPS PRESSURE PIPE | Cell Classification 12454
NOMINAL PIPE SIZE
(IN.)
PIPE OUTSIDE
DIAMETER(IN.)
SDR-26 (160 PSI) SDR-21 (200 PSI) SDR-17 (250 PSI)
MINIMUMWALL (IN.)
POUNDS PER FOOTMINIMUM
WALL (IN.)
POUNDS PER FOOTMINIMUM
WALL (IN.)
POUNDS PER FOOT
20’LENGTH
40’LENGTH
20’LENGTH
40’LENGTH
20’LENGTH
40’LENGTH
1.5" 1.900" N/A N/A N/A .090" .341 .338 .112" .419 lbs. .415 lbs.
2" 2.375" .091" .436 lbs. .431 lbs. .113" .536 .531 .140" .656 lbs. .650 lbs.
2.5" 2.875" .135" .639 lbs. .632 lbs. .137" .789 .780 .169" .962 lbs. .950 lbs.
3" 3.500" .140" .956 lbs. .944 lbs. .167" 1.171 1.157 .206" 1.427 lbs. 1.411 lbs.
4" 4.500" .173" 1.580 lbs. 1.560 lbs. .214" 1.930 1.910 .265" 2.370 lbs. 2.340 lbs.
5" 5.563" .214" 2.420 lbs. 2.390 lbs. .265" 2.970 2.930 .327" 3.620 lbs. 3.570 lbs.
6" 6.625" .255" 3.440 lbs. 3.390 lbs. .316" 4.230 4.160 .390" 5.150 lbs. 5.080 lbs.
8" 8.625" .332" 5.840 lbs. 5.750 lbs. .410" 7.140 7.030 .508" 8.750 lbs. 8.610 lbs.
10" 10.750" .413" 9.110 lbs. 8.940 lbs. .511" 11.160 10.960 .632" 13.650 lbs. 13.400 lbs.
12" 12.750" .490" 12.820 lbs. 12.650 lbs. .606" 15.700 15.450 .750" 19.200 lbs. 18.950 lbs.
13www.northernpipe.com
IPS Pressure Pipe
uASTM D2241 PRESSURE PIPE | Gasketed Joint Specifications
Northern Pipe Products PVC gasketed IPS Pressure Rated Pipe Water Transmission Pipe is made with gasketed joints conforming to ASTM D3139 when measured in accordance with ASTM D2122. Gaskets shall be manufactured to conform to the requirements of ASTM F477. Northern Pipe Products employs the Rieber Gasket System. The Rieber joining system is a factory made “locked-in” flexible elastomeric seal. The gasket is installed in the bell race during manufacture of the joint. It should not be removed for any reason, destruction of the joint occurs.
u LOCKED-IN GASKET JOINT
NOMINALPIPE SIZE
(IN.)
DIMENSIONS (IN.)
(A)GASKET GROOVE (RACE) OUTSIDE
DIAMETER
(B)LIP LENGTH
(C)GASKET GROOVE(RACE) LENGTH
(D)OVERALL JOINT
(E)SPIGOT INSERTION
DEPTH
1.5" 2.560" .625" .820" 4.000" 3.000"
2" 3.090" .750" .760" 4.250" 3.250"
2.5" 3.825" 1.000" 1.090" 4.500" 3.500"
3" 4.550" 1.000" 1.160" 4.750" 3.750"
4" 5.650" 1.250" 1.150" 5.750" 4.750"
5" 6.790" 1.250" 1.250" 6.250" 5.250"
6" 8.100" 1.500" 1.375" 6.750" 5.750"
8" 10.350" 1.500" 1.500" 7.250" 6.250"
10" 12.700" 1.750" 1.750" 8.250" 7.250"
12" 14.900" 2.000" 1.900" 9.000" 8.000"
A. Gasket Groove (Race) Outside DiameterB. Lip LengthC. Gasket Groove (Race) LengthD. Overall JointE. Spigot Insertion Depth
B CD
E
A
May-2015 | 1302 39th St NW, Fargo, ND 58102 | 701-282-7655 | 800-747-7655 | Fax: 701-282-288714
IPS Pressure Pipe
uASTM D2241 PRESSURE PIPE | Solvent Weld Pipe Specifications
Northern Pipe Products PVC IPS Pressure Rated Pipe is manufactured from compounds conforming to cell class 12454 in accordance with ASTM D1784. The Belled End Pipe meets or exceeds the specifications of ASTM D2672, is made from potable water compounds and carries the NSF Standard 14 and NSF Standard 61 mark of acceptance with Annex G "lead-free". The 2” through 12” diameter SDR-26, the 1.5” through 12” diameter SDR-21, and the 1.5” through 12” diameter SDR-17 pipe sizes are also Canadian Standards Association Standard B137.3 listed. The pipe standard length is 20’. The .75” through 3” sizes represent overall length and 4” through 12” sizes represent laying length.
uASTM D2241 SOLVENT WELD IPS PRESSURE PIPE | Cell Classification 12454
NOMINAL PIPE SIZE
(IN.)
PIPE OUTSIDEDIAMETER
(IN.)
SDR-26 (160 PSI) SDR-21 (200 PSI) SDR-17 (250 PSI)
MINIMUMWALL (IN.)
POUNDS PER FOOT
MINIMUMWALL (IN.)
POUNDS PER FOOT
MINIMUMWALL (IN.)
POUNDS PER FOOT
20’LENGTH
20’LENGTH
20’LENGTH
.75" 1.050" N/A N/A .060" .122 lbs. N/A N/A
1" 1.315" N/A N/A .063" .162 lbs. N/A N/A
1.25" 1.660" .064" .210 lbs. .079" .257 lbs. N/A N/A
1.5" 1.900" .073" .274 lbs. .090" .335 lbs. .112" .411 lbs.
2" 2.375" .091" .427 lbs. .113" .525 lbs. .140" .643 lbs.
2.5" 2.875" .110" .625 lbs. .137" .771 lbs. .169" .939 lbs.
3" 3.500" .135" .933 lbs. .167" 1.143 lbs. .206" 1.394 lbs.
4" 4.500" .173" 1.580 lbs. .214" 1.940 lbs. .265" 2.370 lbs.
5" 5.563" .214" 2.420 lbs. .265" 2.960 lbs. .327" 3.610 lbs.
6" 6.625" .255" 3.440 lbs. .316" 4.220 lbs. .390" 5.140 lbs.
8" 8.625" .332" 5.840 lbs. .410" 7.140 lbs. .508" 8.750 lbs.
10" 10.750" .413" 9.060 lbs. .511" 11.100 lbs. .632" 13.570 lbs.
12" 12.750" .490" 12.800 lbs. .606" 15.690 lbs. .750" 19.180 lbs.
15www.northernpipe.com
IPS Pressure Pipe
uASTM D1785 SCHEDULE 40 PRESSURE PIPE | Solvent Weld Pipe Specifications
Northern Pipe Products PVC IPS Pressure Rated Schedule 40 Pipe is manufactured from compounds conforming to cell class 12454 in accordance with ASTM D1784. The Belled End Pipe meets or exceeds specification ASTM D2672, is made from potable water compounds, and carries the NSF Standard 14 and NSF Standard 61 mark of acceptance with Annex G "lead-free". The .75” through 12” diameter pipe sizes are also Canadian Standards Association Standard B137.3 listed. Plain end and bell end pipe sizes 1.25” through 12” are dual marked with specification ASTM D2665 (Plastic Drain, Waste and Vent Pipe). Pipe standard length is 20’. The .75” through 3” sizes represent overall length and 4” through 16” sizes represent laying length.
uPVC SCHEDULE 40 PRESSURE PIPE | Cell Classification 12454
NOMINAL PIPE SIZE
(IN.)
PIPE OUTSIDEDIAMETER
(IN.)
PIPEPRESSURE
RATING(PSI)
SCH-40 PLAIN END SCH-40 BELL END
MINIMUMWALL (IN.)
POUNDSPER FOOT
MINIMUMWALL (IN.)
POUNDSPER FOOT
20’LENGTH
20’LENGTH
.75" 1.050" 480 psi .113" .218 lbs. .113" .218 lbs.
1" 1.315" 450 psi .133" .323 lbs. .133" .323 lbs.
1.25" 1.660" 370 psi .140" .437 lbs. .140" .437 lbs.
1.5" 1.900" 330 psi .145" .523 lbs. .145" .523 lbs.
2" 2.375" 280 psi .154" .703 lbs. .154" .703 lbs.
2.5" 2.875" 300 psi .203" 1.114 lbs. .203" 1.114 lbs.
3" 3.500" 260 psi .216" 1.457 lbs. .216" 1.457 lbs.
4" 4.500" 220 psi .237" 2.080 lbs. .237" 2.130 lbs.
5" 5.563" 190 psi .258" 2.810 lbs. .258" 2.890 lbs.
6" 6.625" 180 psi .280" 3.650 lbs. .280" 3.760 lbs.
8" 8.625" 160 psi .322" 5.490 lbs. .322" 5.850 lbs.
10" 10.750" 140 psi .365" 7.790 lbs. .365" 8.040 lbs.
12" 12.750" 130 psi .406" 10.300 lbs. .406" 10.670 lbs.
14" 14.000" 130 psi .437" 12.200 lbs. .437" 12.620 lbs.
16" 16.000" 130 psi .500" 15.930 lbs. .500" 16.550 lbs.
Note: 4” diameter schedule 40 with the Canadian Standards Association mark of acceptance is available on special order.
May-2015 | 1302 39th St NW, Fargo, ND 58102 | 701-282-7655 | 800-747-7655 | Fax: 701-282-288716
IPS Pressure Pipe
u IPS PRESSURE PIPE | Solvent Weld Joint Specifications
NOMINAL PIPE SIZE (IN.)
DIMENSIONS (IN.)
(D)SOCKET DEPTH
(E)SPIGOT INSERTION DEPTH
.75" 2.00" 2.00"
1" 2.00" 2.00"
1.25" 2.50" 2.50"
1.5" 3.00" 3.00"
2" 3.00" 3.00"
2.5" 3.50" 3.75"
3" 4.00" 4.25"
4" (10' Length) 4.00" 4.25"
4" (20' Length) 6.00" 6.25"
5" 7.00" 7.50"
6" 6.50" 7.00"
8" 7.00" 7.50"
10" 7.50" 8.00"
12" 8.50" 8.75"
D
E D. Socket DepthE. Spigot Insertion Depth
17www.northernpipe.com
IPS Pressure Pipe
u IPS PRESSURE PIPE | Truckload Data
NOMINALPIPE SIZE
(IN.)
PIPE OUTSIDE
DIAMETER(IN.)
PLAIN END GASKET JOINT SOLVENT WELD
FEET PERPALLET
FEET PERTRUCKLOAD
FEET PER PALLET FEET PER TRUCKLOADFEET PERPALLET
FEET PERTRUCKLOAD20’
LENGTH20’
LENGTH40’
LENGTH20’
LENGTH40’
LENGTH20’
LENGTH
.75" 1.050" 8,100' 226,800' N/A N/A N/A N/A 8,100' 226,800'
1" 1.315" 6,300' 176,400' N/A N/A N/A N/A 6,300' 176,400'
1.25" 1.660" 4,000' 112,000' N/A N/A N/A N/A 4,000' 112,000'
1.5" 1.900" 3,600' 86,400' 3,600' 7,200' 86,400' 86,400' 3,600' 86,400'
2" 2.375" 2,100' 58,800' 2,100' 4,200' 58,800' 58,800' 2,100' 58,800'
2.5" 2.875" 1,460' 40,880' 1,460' 2,920’ 40,880' 40,880' 1,460' 40,880'
3" 3.500" 920' 25,760' 920' 1,840' 25,760' 25,760' 920' 25,760'
4" 4.500" 580' 16,240' 580' 1,160' 16,240' 16,240' 580' 16,240'
4.5" 4.950" 580' 13,920' N/A N/A N/A N/A 580' 13,920'
5" 5.563" 460' 11,040' 460' 920' 11,040' 11,040' 460' 11,040'
6" 6.625" 400' 8,000' 280' 560' 7,840' 7,840' 400' 8,000'
8" 8.625" 200' 4,000' 200' 400' 4,000' 4,000' 200' 4,000'
10" 10.750" 240' 2,880' 240' 160'/200' 2,880' 2,880' 240' 2,880'
12" 12.750" 80'/160' 2,240' 120'/160' 120'/160' 1,960' 1,960' 80’/160' 2,240'
14" 14.000" 120' 1,440' 120' N/A 1,440' N/A 120' 1,440'
15" (PIP) 15.300" N/A N/A 120' N/A 1,440' N/A N/A N/A
16" 16.000" 120' 1,440' 120' N/A 1,440' N/A 120' 1,440'
Well Casing
May-2015 | 1302 39th St NW, Fargo, ND 58102 | 701-282-7655 | 800-747-7655 | Fax: 701-282-288718
uASTM F480 WELL CASING PIPE | Pipe Specifications
NOMINAL PIPE SIZE (IN.)
PIPE OUTSIDEDIAMETER (IN.)
PIPE INSIDEDIAMETER (IN.)
MINIMUMWALL (IN.)
MAXIMUM BURY DEPTH
(FT.)
SOCKET DEPTH (IN.)
FEET PER PALLET
POUNDSPER FOOT
4” 4.500" 4.154" .173" 120’ 6.0” 580’ 1.580 lbs.
4.5” 4.950" 4.570" .190" 120’ 6.0” 580’ 1.900 lbs.
5” 5.563" 5.135" .214" 120’ 7.0” 460’ 2.420 lbs.
6” 6.625" 6.115" .255" 120’ 6.5” 400’ 3.440 lbs.
8” 8.625" 7.961" .332" 120’ 7.0” 200’ 5.840 lbs.
10” 10.750" 9.924" .413" 120’ 7.5” 240’ 9.060 lbs.
12” 12.750" 11.770" .490" 120’ 8.5” 160’ 12.800 lbs.
14" 14.000" 12.924" .538" 120’ 8.5" 120’ 15.300 lbs.
16" 16.000" 14.770" .615" 120’ 9.0" 120’ 20.000 lbs.
uASTM F480 WELL CASING PIPE | SDR-26
Northern Pipe Products PVC pressure rated water well casing pipe is manufactured from compounds conforming to requirements of ASTM F480 in accordance with ASTM D1784 with cell classification 12454. The belled end pressure pipe meets or exceeds specification ASTM F480 and is available in sizes 2” through 16”. Northern Pipe Products well casing pipe carries the NSF mark of acceptance and is manufactured in 20’ lengths.
NOMINAL PIPE SIZE (IN.)
PIPE OUTSIDEDIAMETER (IN.)
PIPE INSIDEDIAMETER (IN.)
MINIMUMWALL (IN.)
MAXIMUM BURY DEPTH
(FT.)
SOCKET DEPTH (IN.)
FEET PER PALLET
POUNDSPER FOOT
2” 2.375" 2.149" .113" 235’ 3.0” 2,100’ .525 lbs.
3” 3.500" 3.166" .167" 235’ 4.0” 920’ 1.143 lbs.
4” 4.500" 4.072" .214" 235’ 6.0” 580’ 1.940 lbs.
5” 5.563" 5.033" .265" 235’ 7.0” 460’ 2.960 lbs.
6” 6.625" 5.993" .316" 235’ 6.5” 400’ 4.220 lbs.
8” 8.625" 7.805" .410" 235’ 7.0” 200’ 7.140 lbs.
10” 10.750" 9.728" .511" 235’ 7.5” 240’ 11.100 lbs.
12” 12.750" 11.538" .606" 235’ 8.5” 160’ 15.690 lbs.
uASTM F480 WELL CASING PIPE | SDR-21
Well Casing
19www.northernpipe.com
uASTM F480 WELL CASING PIPE | Pipe Specifications (continued)
NOMINALPIPE SIZE
(IN.)
PIPE OUTSIDEDIAMETER (IN.)
PIPE INSIDEDIAMETER (IN.)
MINIMUMWALL (IN.)
MAXIMUM BURY DEPTH
(FT.)
SOCKET DEPTH (IN.)
FEET PER PALLET
POUNDSPER FOOT
2” 2.375” 2.067” .154” 630’ 3.0” 2,100’ .703 lbs.
3” 3.500” 3.068” .216” 540’ 4.0” 920’ 1.457 lbs.
4” 4.500” 4.026” .237” 325’ 6.0” 580’ 2.130 lbs.
4.5” 4.950” 4.454” .248” 275’ 6.0” 580’ 2.460 lbs.
5” 5.563” 5.047” .258” 215’ 7.0” 460’ 2.890 lbs.
6” 6.625” 6.065” .280” 160’ 6.5” 400’ 3.760 lbs.
8” 8.625” 7.981” .322” 110’ 7.0” 200’ 5.850 lbs.
10" 10.750” 10.020” .365” 85' 7.5" 240' 8.040 lbs.
12" 12.750” 11.938” .406” 70' 8.5" 160' 10.670 lbs.
14" 14.000” 13.126” .437” 70' 8.5" 120’ 12.620 lbs.
16" 16.000” 15.000” .500” 70' 9.0" 120’ 16.550 lbs.
uASTM F480 WELL CASING PIPE | Schedule 40
NOMINALPIPE SIZE
(IN.)
PIPE OUTSIDEDIAMETER (IN.)
PIPE INSIDEDIAMETER (IN.)
MINIMUMWALL (IN.)
MAXIMUM BURY DEPTH
(FT.)
SOCKET DEPTH (IN.)
FEET PER PALLET
POUNDSPER FOOT
4” 4.500" 3.970" .265" 450’ 6.0” 580’ 2.370 lbs.
5” 5.563" 4.909" .327" 450’ 7.0” 460’ 3.610 lbs.
6” 6.625" 5.845" .390" 450’ 6.5” 400’ 5.140 lbs.
8” 8.625" 7.609" .508" 450’ 7.0” 200’ 8.750 lbs.
10” 10.750" 9.486" .632" 450’ 7.5” 240’ 13.570 lbs.
12” 12.750" 11.250" .750" 450’ 8.5” 160’ 19.180 lbs.
uASTM F480 WELL CASING PIPE | SDR-17
Well Casing
May-2015 | 1302 39th St N, Fargo, ND 58102 | 701-282-7655 | 800-747-7655 | Fax: 701-282-288720
uASTM F480 WELL CASING PIPE | Solvent Weld Joint Specifications
NOMINAL PIPE SIZE (IN.)
DIMENSIONS (IN.)
(D)SOCKET DEPTH
(E)SPIGOT INSERTION DEPTH
2” 3.00” 3.00”
3” 4.00” 4.25”
4” 6.00” 6.25”
4.5” 6.00” 6.25”
5” 7.00” 7.50”
6” 6.50” 7.00”
8” 7.00” 7.50”
10” 7.50” 8.00”
12” 8.50” 8.75”
14” 8.50” 8.75”
16” 9.00” 9.50”
D
E D. Socket DepthE. Spigot Insertion Depth
Drain Waste Vent
21www.northernpipe.com
uASTM D2665 SCHEDULE 40 DRAIN WASTE VENT | Pipe Specifications
NOMINALPIPE SIZE
(IN.)
PIPE OUTSIDEDIAMETER (IN.)
PIPE INSIDEDIAMETER (IN.)
MINIMUMWALL (IN.)
POUNDSPER FOOT
LENGTHFEET
PER PALLETFEET
PER TRUCKLOAD
1.25” 1.660" 1.380" .140” .437 lbs. 20' 4,000' 112,000'
1.5” 1.900" 1.610" .145” .523 lbs. 10’ 1,800' 86,400'
1.5” 1.900" 1.610" .145” .523 lbs. 20’ 3,600' 86,400'
2” 2.375" 2.067" .154" .703 lbs. 10’ 1,050' 58,800'
2” 2.375" 2.067" .154" .703 lbs. 20’ 2,100' 58,800'
3” 3.500" 3.068" .216" 1.457 lbs. 10’ 460' 25,760'
3” 3.500" 3.068" .216" 1.457 lbs. 20’ 920' 25,760'
4” 4.500" 4.026" .237" 2.080 lbs. 10’ 290' 16,240'
4” 4.500" 4.026" .237" 2.080 lbs. 20’ 580' 16,240'
6” 6.625" 6.065" .280" 3.650 lbs. 10’ 200' 8,000'
6” 6.625" 6.065" .280" 3.650 lbs. 20’ 400' 8,000'
8” 8.625" 7.981" .322" 5.490 lbs. 20' 200' 4,000'
10” 10.750" 10.020" .365" 7.790 lbs. 20' 240' 2,880'
12” 12.750" 11.938" .406" 10.300 lbs. 20' 80'/160' 2,240'
uASTM D2665 SCHEDULE 40 DRAIN WASTE VENT
Northern Pipe Products PVC IPS Pressure Rated SCH-40 Pipe is manufactured from compounds conforming to cell class 12454 in accordance with ASTM D1784. The Belled End Pipe meets or exceeds specification ASTM D2672, is made from potable water compounds, and carries the NSFpw and NSFdwv marks of acceptance. Plain end and bell end pipe sizes 1.25” through 12” are dual marked with specifications ASTM D1785 (SCH-40) and ASTM D2665 (Plastic Drain, Waste, and Vent Pipe). Pipe standard length is 20’. The 1.25” through 3” sizes represent overall length and 4” through 12” sizes represent laying length. All 10' length pipe is overall length.
SIZE 1.25" 1.5" 2" 3" 4" 6" 8" 10" 12"
Pressure Rating at 73ºF 370 psi 330 psi 280 psi 260 psi 220 psi 180 psi 160 psi 140 psi 130 psi
Northern Pipe Drain Waste Vent is dual marked and may be used for pressure applications according to the following chart:
Northern Pipe Products DWV meets or exceeds the requirements of the following standards: ASTM D1785, ASTM D2665, NSF - DWV, NSF - PW.
Bell End Sewer Pipe
May-2015 | 1302 39th St NW, Fargo, ND 58102 | 701-282-7655 | 800-747-7655 | Fax: 701-282-288722
uPVC GRAVITY SEWER PIPE | Bell End Sewer Pipe Specifications
NOMINALPIPE SIZE
(IN.)SDR
PIPE OUTSIDEDIAMETER (IN.)
MINIMUMWALL (IN.)
POUNDSPER FOOT
LENGTHFEET
PER PALLETFEET PER
TRUCKLOAD
4” 35 4.215" .120" 1.01 lbs. 10’ 630’ 20,160’
4” 35 4.215" .120" 1.01 lbs. 20’ 1,260’ 20,160’
4” 26 4.215" .162" 1.35 lbs. 10’ 630’ 20,160’
6” 35 6.275" .180" 2.26 lbs. 10’ 330’ 7,920’
6” 35 6.275" .180" 2.33 lbs. 14’ 462’ 8,316’
6” 26 6.275" .241" 3.00 lbs. 10’ 330’ 7,920’
8” 35 8.400" .240" 4.17 lbs. 14’ 336’ 6,048’
10” 35 10.500" .300" 6.55 lbs. 14’ 168’/210’ 3,402’
12” 35 12.500" .360" 9.41 lbs. 14’ 112’ 2,688’
15” 35 15.300" .437" 14.16 lbs. 14’ 84’ 1,512’
uASTM D3034 | Bell End Sewer Pipe
Northern Pipe Products PVC Belled Sewer Pipe is made from compounds conforming to requirements of ASTM D1784 and meets all dimensional and physical specifications of ASTM D3034. 4" through 6" is manufactured in 10' overall lengths, while 8" through 15" is 14' laying length.
NOMINALPIPE SIZE
(IN.)
PIPE OUTSIDEDIAMETER (IN.)
MINIMUMWALL (IN.)
POUNDSPER FOOT
LENGTHFEET
PER PALLETFEET PER
TRUCKLOAD
4” 4.215" .075" .64 lbs. 10’ 630’ 20,160’
6” 6.275" .100" 1.27 lbs. 10’ 330’ 7,920’
uASTM D2729 | Bell End Sewer Pipe
Bell End Sewer Pipe
23www.northernpipe.com
uPERFORATION SPECIFICATIONS
NOMINALPIPE SIZE
(IN.)
PIPE OUTSIDEDIAMETER (IN.)
MINIMUMWALL (IN.)
LENGTHROWS OF
PERFORATIONSHOLE SIZE
HOLE SPACING PER
ROW
FEETPER PALLET
4" 4.215" .075" 10' 2 5/8 6 630'
6" 6.275" .100" 10' 2 5/8 6 330'
uDRAINAGE PIPE | ASTM D2729
NOMINALPIPE SIZE
(IN.)
PIPE OUTSIDEDIAMETER (IN.)
MINIMUMWALL (IN.)
LENGTHROWS OF
PERFORATIONSHOLE SIZE
HOLE SPACING PER
ROW
FEETPER PALLET
4" 4.215" .120" 10' 4 1/4 3 630'
6" 6.275" .180" 10' 4 1/4 3 330'
uHIGHWAY UNDERDRAIN SYSTEMS | ASTM F758 & AASHTO M278
NOMINALPIPE SIZE
(IN.)
PIPE OUTSIDEDIAMETER (IN.)
MINIMUMWALL (IN.)
LENGTHROWS OF
PERFORATIONSHOLE SIZE
HOLE SPACING PER
ROW
FEETPER PALLET
4" 4.215" .120" 10' 2 5/8 6 630'
6" 6.275" .180" 10' 2 5/8 6 330'
uSDR-35 SEWER PIPE | ASTM D3034
120 ± 5º
TYPICAL 2-ROW PATTERN TYPICAL 4-ROW PATTERN | CONFORMS TO ASTM F758
160 ± 5º
90 ± 5º