C_5_Cranes_10_CI
-
Upload
ashraf-beram -
Category
Documents
-
view
214 -
download
0
description
Transcript of C_5_Cranes_10_CI
![Page 1: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/1.jpg)
OSHA Office of Training & Education 1
Cranes
![Page 2: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/2.jpg)
OSHA Office of Training & Education 2
Major Causes of Crane Accidents
• Contact with power lines
• Overturns
• Falls
• Mechanical failures
![Page 3: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/3.jpg)
OSHA Office of Training & Education 3
• Instability – unsecured load, load capacity exceeded, or ground not level or too soft
• Lack of communication - the point of operation is a distance from the crane operator or not in full view of the operator
• Lack of training
• Inadequate maintenance or inspection
How Do Accidents Occur?
VIDEO
![Page 4: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/4.jpg)
OSHA Office of Training & Education 4
![Page 5: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/5.jpg)
OSHA Office of Training & Education 5
![Page 6: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/6.jpg)
CRANE SAFETY
![Page 7: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/7.jpg)
OSHA Office of Training & Education 7
Planning Before Start-Up• Level the crane and ensure support surface is firm
and able to support the load
• Contact power line owners and determine precautions. Know the location and voltage of overhead power lines.
• Know the basic crane capacities, limitations, and job site restrictions, such as the location of power lines, unstable soil, or high winds.
• Make other personnel aware of hoisting activities.
• Barricade areas within swing radius.
• Ensure proper maintenance and inspections.
• Determine safe areas to store materials and place machinery.
![Page 8: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/8.jpg)
OSHA Office of Training & Education 8
CRANE SAFETY
• Only people
that have
trained are
permitted to
operate cranes
![Page 9: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/9.jpg)
OSHA Office of Training & Education 9
CRANE SAFETY
• Barricades around the swing area of a revolving cab must be used when operating a crane in areas where pedestrians or traffic pass close by.
![Page 10: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/10.jpg)
OSHA Office of Training & Education 10
CRANE SAFETY
• Never operate
cranes closer than
10 feet from power
lines. Voltages
greater than 50,000
volt require greater
distance.
![Page 11: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/11.jpg)
OSHA Office of Training & Education 11
CRANE SAFETY
• Before lifting
carefully inspect
all rigging, slings,
hooks, etc.
• Report any
damage or defects
to your supervisor
right away.
![Page 12: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/12.jpg)
OSHA Office of Training & Education 12
CRANE SAFETY
• When it is
necessary to
guide a
suspended,
use tag lines.
![Page 13: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/13.jpg)
OSHA Office of Training & Education 13
![Page 14: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/14.jpg)
OSHA Office of Training & Education 14
![Page 15: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/15.jpg)
OSHA Office of Training & Education 15
CRANE SAFETY
• Don’t distract
the crane
operator. Only
one signalman
at a time.
VIDEOCLIP
![Page 16: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/16.jpg)
OSHA Office of Training & Education 16
CRANE SAFETY
• Never ride the
load, ball or
hook.
![Page 17: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/17.jpg)
OSHA Office of Training & Education 17
Affected Zone (Depth x 1.5)
*Average Soil Only
Be aware of existing
underground utilities
and backfill.
D
D x 1.5
Recommended Safe Work Practice: Affected Zone
![Page 18: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/18.jpg)
OSHA Office of Training & Education 18
CRANE SAFETY
• Keep out from
under suspended
loads.
• Watch out for
materials that
could fall on you if
hit by the moving
load.
![Page 19: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/19.jpg)
OSHA Office of Training & Education 19
![Page 20: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/20.jpg)
OSHA Office of Training & Education 20
CRANE SAFETY
• Make sure you
provide
yourself a way
out when
directing load
drops.
![Page 21: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/21.jpg)
OSHA Office of Training & Education 21
![Page 22: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/22.jpg)
OSHA Office of Training & Education 22
Competent Person
The competent person must
inspect all machinery and
equipment prior to each
use, and during use, to
make sure it is in safe
operating condition.
If it needs fixing, take it out
of service and don’t use it
until it is fixed
BrokenTrack
![Page 23: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/23.jpg)
OSHA Office of Training & Education 23
Load Capacity - Speed - Warnings
• Make sure the crane
operator can see the:
Rated Load
Capacities
Operating Speeds
Special Hazard
Warning or
Instruction
Load Rating Chart
![Page 24: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/24.jpg)
OSHA Office of Training & Education 24
Stay clear
from power
lines at least
10 feet
Power Lines
![Page 25: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/25.jpg)
OSHA Office of Training & Education 25
An illustration of
the signals must
be posted at the
job site
Hand Signals
![Page 26: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/26.jpg)
OSHA Office of Training & Education 26
![Page 27: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/27.jpg)
OSHA Office of Training & Education 27
Guard Moving Parts
Unguarded
Chain Drive
Guard moving parts such as gears or belts
![Page 28: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/28.jpg)
OSHA Office of Training & Education 28
Swing Radius
Stay out of the swing radius of the crane –
Make sure there are barrier guards showing swing radius
![Page 29: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/29.jpg)
OSHA Office of Training & Education 29
Operator Visibility
Broken Window
Make sure broken windows or other obstructions
do not prevent the operator from seeing
![Page 30: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/30.jpg)
OSHA Office of Training & Education 30
Ladders
Ladder
Use ladders to get to the upper portion of the cab
![Page 31: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/31.jpg)
OSHA Office of Training & Education 31
Guardrails
Runways and steps need to have guardrails, handholds and slip resistant surfaces
![Page 32: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/32.jpg)
OSHA Office of Training & Education 32
Boom Angle Indicators
![Page 33: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/33.jpg)
OSHA Office of Training & Education 33
Supporting Surface
Cranes must be on a firm supporting
surface and level within 1 percent
![Page 34: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/34.jpg)
OSHA Office of Training & Education 34
![Page 35: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/35.jpg)
OSHA Office of Training & Education 35
The grooves must be smooth and free from surface defects which could cause rope damage
Sheaves
![Page 36: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/36.jpg)
OSHA Office of Training & Education 36
Cranes shall cease operation when the
wind speed exceeds the safe operating
level recommended in the manufactures
specification
![Page 37: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/37.jpg)
OSHA Office of Training & Education 37
Worn Part
![Page 38: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/38.jpg)
OSHA Office of Training & Education 38
Conduct
regular
inspections
of tires for
excessive
wear or
damage
Tire Inspections
![Page 39: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/39.jpg)
OSHA Office of Training & Education 39
![Page 40: C_5_Cranes_10_CI](https://reader033.fdocuments.in/reader033/viewer/2022052702/5695d1cd1a28ab9b0297f2fb/html5/thumbnails/40.jpg)
OSHA Office of Training & Education 40