C20 Unit 02 - Gases
-
Upload
mlacoursiere -
Category
Documents
-
view
323 -
download
1
Transcript of C20 Unit 02 - Gases
![Page 1: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/1.jpg)
Chemistry 20 – Unit 2 – GasesLesson 1: Introduction
By the end of this Unit you will be able to:– explain molecular behaviour, using models of the gaseous state of
matter.
By the end of this Lesson you will be able to:– express pressure in a variety of ways, including units of
kilopascals, atmospheres and millimetres of mercury.20–B1.4k
– perform calculations, based on the gas laws, under STP, SATP and other defined conditions.20–B1.4k
– explain that the goal of science is knowledge aboutthe natural world20–B1.2sts
![Page 2: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/2.jpg)
Chemistry 20 – Unit 2 – Gases
- The three states of matter include solid, liquid and gas.
- The states of matter can be differentiated by the following:
State Characteristics
Solids
Liquids
Gases
Definite shape and definite volume
Varied shape and definite volume
Varied shape and varied volume
*
![Page 3: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/3.jpg)
Gases in the Atmosphere
- Gases in our atmosphere perform a major function in sustaining life on our planet. The atmosphere is needed for:
- breathing and cellular respiration
- C6H12O6(s) + 6 O2(g) 6 CO2(g) + 6 H2O(g)
- photosynthesis in plants
- 6 CO2(g) + 6 H2O(g) C6H12O6(s) + 6 O2(g)
- protection from harmful solar radiation such as ultraviolet light (UV rays)
- transmission of heat and water vapour throughout the earth
*
![Page 4: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/4.jpg)
Composition of Gases in the Atmosphere
GasPercentage By
Volume
nitrogen ( N2(g) ) 78.1
oxygen ( O2(g) ) 20.9
argon ( Ar(g) ) 0.93
carbon dioxide ( CO2(g) ) 0.03
neon ( Ne(g) ) 0.002
helium ( He(g) ) 0.0005
krypton ( Kr(g) ), xenon ( Xe(g) ),
methane ( CH4(g) ), hydrogen ( H2(g) ) trace amounts
nitrogen oxides ( NO2(g), NO3(g) ) trace amounts
sulfur oxides ( SO2(g), SO3(g) ) trace amounts
water vapour trace amounts
*
![Page 5: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/5.jpg)
- Although nitrogen and oxygen gases make up about 99 % of our atmosphere, other gases are a source of pollution. For example:
- SO2(g) and SO3(g) are called sulfur oxides and contribute to acid rain.
- SO2(g) + H2O(g) H2SO3(aq) sulfurous acid
- NO(g) and NO2(g) are called nitrogen oxides and contribute to
acid rain.
- NO(g) + H2O(g) HNO2(aq) nitrous acid
- CO(g) is given off in incomplete hydrocarbon combustion reactions.
*
![Page 6: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/6.jpg)
Properties of Gases
- Under normal conditions, over 99.9 % of the total volume of a gas is empty space, therefore gases can be easily compressed.
- Because gas particles or molecules move continuously in a straight line until they hit another object, they spontaneously fill the entire space available. This process can be termed diffusion.
- When gas particles collide, no energy is lost so their collisions are said to be elastic.
- The higher the temperature of a gas, the more kinetic energy it has and therefore the faster it can move.
*
![Page 7: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/7.jpg)
Gas Pressure
- Pressure is defined as a force exerted on an area.
- A force is a push or pull and is measured in newtons (N).
- Area is measured in square metres (m2).
)pascal(Pa1mN
AreaForceessurePr
2-
- When gas particles hit a wall or obstacle, they collectively exert a force (push) on that surface.
- If the force is great enough the surface gives way, such as in a balloon, when air forces the material to expand.
- If the surface does not give way, say as in a canister, gas pressure builds up.
- At sea level, it has been determined that the average pressure of the atmosphere is 101.325 kPa. This value is known as standard pressure or 1.0 atmosphere.
*
![Page 8: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/8.jpg)
- Atmospheric pressure is measured by a barometer.
- The barometer was invented by Evangelista Torrecelli. He created a barometer utilizing liquid mercury in a long, inverted glass tube (test tube) placed in a pan of mercury.
- The height of the mercury would rise or fall depending on the atmospheric pressure changes. If the pressure dropped, the level of mercury would go down.
- The average air pressure at sea level is 101.325 kPa, which means that the height of the mercury would be 760 mm, also known as 760 torr.
- Therefore: 101.325 kPa = 760 mm Hg = 760 torr = 1 atm
*
![Page 9: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/9.jpg)
Mercury Barometer
760 mm of Hg is 1.0 atmosphere of
pressure
*
![Page 10: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/10.jpg)
Conversions
1) 99.0 kPa = _________ mm Hg
kPa0.99
2) 700 mm Hg = ___________ kPa
Hgmm700 Hgmm760kPa324.101
kPa3.93
3) 720 mm Hg = ____________ atm
Hgmm760
atm0.1Hgmm720 atm947.0
4) 1.43 atm = _____________ kPa
atm1kPa325.101
atm43.1 kPa145
*
kPa325.101Hgmm760
kPa0.99 Hgmm743kPa325.101Hgmm760
kPa0.99
![Page 11: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/11.jpg)
The Aneroid Barometer
- Because the mercury barometer has its disadvantages to its portability an aneroid barometer was developed.
- This barometer has a vacuum canister that expands or contracts as the pressure changes.
- The change in the shape of the canister causes a needle to move along a scale that reads the pressure.
- Very sensitive barometers measure altitude and are called altimeters.
*
![Page 12: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/12.jpg)
The Four Gas Law Variables:Volume, Temperature, Pressure and Moles
Volume
- All gases must be enclosed in a container.
- The three-dimensional space enclosed by the container walls is called volume ( V ).
- Volume in chemistry is usually measured in litres ( L ) or millilitres ( mL ). A litre is also called a cubic decimetre ( dm3 ).
- A volume of 1 mL = 1 cm3.
*
![Page 13: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/13.jpg)
Temperature
- All gases have a temperature, usually measured in degrees Celsius ( °C ), named after Anders Celsius. When the generalized variable of temperature is discussed, the symbol T is used.
- There is another temperature scale that is very important in gas behavior. It is called the Kelvin scale ( K ). Note that K does not have a degree sign and Kelvin is capitalized because this was a person's title (Lord Kelvin, his given name was William Thomson).
- All gas law problems must be done in Kelvin temperatures.
- Standard Temperature is defined as 0 C or 273.15 K.
*
![Page 14: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/14.jpg)
Pressure
- The molecules of gas hitting the walls of the container create gas pressure ( P ).
- There are three different units of pressure used in chemistry:
1. atmospheres ( atm )
2. millimetres of mercury ( mm Hg )
3. pascals ( Pa ) or kilopascals ( kPa )
- Standard Pressure is defined as one atm or 760.0 mm Hg or 101.325 kPa.
- Standard Temperature and Pressure is abbreviated to STP.
Amount of Gas
- The amount of gas present is measured in moles ( mol ) or in grams ( g ) .
*
![Page 15: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/15.jpg)
Boyle’s Law
- Robert Boyle investigated the relationship between pressure and volume in gases, while keeping the temperature constant.
- Boyle’s Law states that the volume of a quantity of gas, at a specific temperature, is inversely proportional to the pressure applied to the gas.
- This means that if the volume of a gas increases the pressure decreases.
- For example, if you had a syringe filled with air, there would be a certain amount of pressure inside the syringe. If you compressed the plunger, the volume of the gas would decrease, but the air pressure inside the cylinder would increase.
- Mathematically,
P1
V
or
pressuretoalproportioninverselyisvolume
*
![Page 16: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/16.jpg)
- A relationship such as this can be shown to have a constant, k.
kPV
- Inserting values, we can plot the inverse relationship between gas pressure and volume.
Pressure(kPa)
Volume (L)
- As the volume approaches an infinitely small value, gas pressure reaches an infinitely large value.
- We can never get to zero volume nor zero pressure.
*http://www.grc.nasa.gov/WWW/K-12/airplane/aboyle.html
![Page 17: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/17.jpg)
Boyle’s Law Problems
Using Boyle’s Law, we can calculate the final volume or pressure of a gas, given initial volume and pressure.
1. A container has a volume of 10.0 L and the gas inside exerts a pressure of 75.0 kPa. If the volume of the container was changed to 2.00 L and the temperature was kept the same, calculate the new pressure exerted by the gas in the container.
containerondsectheincontainerfirstthein kk
21 kk
2211 VPVP
L00.2PL0.10kPa0.75 2
2P
L00.2L0.10kPa0.75
2PkPa375
*
![Page 18: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/18.jpg)
2. A syringe’s plunger is withdrawn, changing the volume of the gas from 35.75 cm3 to 83.90 cm3. If the final pressure is calculated to be 57.4 kPa what was the initial pressure of the gas, assuming that the temperature had not changed.
containerondsectheincontainerfirstthein kk
21 kk
2211 VPVP
331 cm90.83kPa4.57cm75.35P
3
3
1 cm75.35cm90.83kPa4.57
P
kPa135P1
*
![Page 19: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/19.jpg)
Charles’ Law
- J.A. Charles formulated a relationship between gas volume and the temperature, while keeping the pressure constant.
- He stated that the volume of a gas is directly proportional to the temperature of the gas, assuming the pressure remains constant.
- This means that as the volume of a gas decreases or gets smaller, the temperature of the gas also gets smaller.
- For example, if you blow up a balloon to a certain volume at room temperature and then expose the balloon to cold winter temperatures, the balloon's volume will decrease, just as the temperature had decreased.
*
![Page 20: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/20.jpg)
- Mathematically,
TVα
or
etemperaturtoalproportiondirectlyisvolume
- A relationship such as this can be shown to have a constant, k. kTV
- Inserting values, we can plot the direct relationship between gas volume and temperature.
Temperature(K)
Volume (L)
- As the volume approaches an infinitely small value, temperature, which is measured in Kelvins, reaches an infinitely small value.
- We can never get to zero volume nor zero temperature.
*
![Page 21: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/21.jpg)
- A Kelvin degree is just another way of measuring temperature and is used in chemistry and physics for very low temperatures.
- The lowest possible temperature is at a point where no kinetic energy exists and therefore no molecular movement exists.
- This temperature is known to be at zero Kelvin (0 K) and is called absolute zero. ( Note: this is not written 0 K )
- Absolute zero is at –273.15 C, therefore to measure the temperature in degrees Kelvin we use the formula: K = C + 273.15
-To calculate the temperature in C we use the formula: C = K – 273.15
*
![Page 22: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/22.jpg)
Absolute Zero
Freezing Point of Water
0 K– 273.15 C
273.15 K0 C
100 C Boiling Point of Water373.15 K
*
![Page 23: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/23.jpg)
Temperature Conversions
Converting Kelvin to Celsius
25.0 C = __________ K
15.273CK
15.2730.25K
ruleaddingapplydigitstsignificanfor
K2.298K
25.0 K = ___________ C
15.273KC
15.2730.25C
C2.248C
- Note: For all gas problems that involve temperatures the unit must be in Kelvins.
*
![Page 24: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/24.jpg)
Charles’ Law Problems
1. A certain gas occupies a volume of 35.5 L at a standard temperature of 0.00 C. What volume will it occupy at 63.78 C?
Given Information
2
2
1
1
T
V
T
V L5.35V1
K15.273orC00.0T1 ?V2
K93.336orC78.63T2
2
2
1
1
TV
TV
K93.336V
K15.273L5.35 2
2V
K15.273K93.336L5.35
2VL8.43 *
![Page 25: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/25.jpg)
2. A gas has a temperature of 67.4 C when it is at a volume of 864 L. What will be its temperature if the volume is condensed to 10.0 L?
Given Information
2
2
1
1
T
V
T
V L864V1
K6.340orC4.67T1 L0.10V2
?T2
2
2
1
1
TV
TV
2TL0.10
K6.340L864
L864
K6.340L0.10T2
K94.3T2
*
![Page 26: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/26.jpg)
Gay-Lussac’s Law
- Gives the relationship between pressure and temperature when volume and amount are held constant.
- If the temperature of a container is increased, the pressure increases.
- The mathematical form of Gay-Lussac's Law is:
2
2
1
1
TP
TP
*
![Page 27: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/27.jpg)
Problems
1. 10.0 L of a gas is found to exert 97.0 kPa at 25.0 °C. What would be the required temperature (in Celsius) to change the pressure to standard pressure?
21
21
21
TT
PP
VV L0.10V1
kPa0.97P1 C0.25T1 C?T2
kPa325.101P2
L0.10V2
2
2
1
1
TP
TP
2T
kPa325.101K2.298
kPa0.97
kPa0.97
K2.298kPa325.101T2
K311T2
C15.273K311T2
C38T2
*
![Page 28: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/28.jpg)
2. 5.00 L of a gas is collected at 22.0 °C and 745.0 mm Hg. When the temperature is changed to standard, what is the new pressure?
21
21
21
PP
TT
VV
?PHgmm0.745P
K15.273TC0.22T
L00.5VL00.5V
21
21
21
2
2
1
1
TP
TP
K15.273
PK2.295
Hgmm0.745 2
2P
K2.295K15.273Hgmm0.745
2PHgmm689
*
![Page 29: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/29.jpg)
Avogadro's Law
- Gives the relationship between volume and amount when pressure and temperature are held constant. Amount is measured in moles.
- If the amount of gas in a container is increased, the volume increases.
- Suppose the amount is increased. This means there are more gas molecules and this will increase the number of impacts on the container walls. This means the gas pressure inside the container will increase, becoming greater than the pressure on the outside of the walls. This causes the walls to move outward. Since there is more wall space the impacts will lessen and the pressure will return to its original value.
- The mathematical form of Avogadro's Law is: 2
2
1
1
nV
nV
- This means that the volume-amount fraction will always be the same value if the pressure and temperature remain constant.
*
![Page 30: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/30.jpg)
Problem: 5.00 L of a gas is known to contain 0.965 mol. If the amount of gas is increased to 1.80 mol, what new volume will result (at an unchanged temperature and pressure)?
2
2
1
1
nV
nV
mol80.1
Vmol965.0L00.5 2
2V
mol965.0mol80.1L00.5
2VL33.9
*
![Page 31: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/31.jpg)
Combined Gas Law
To derive the Combined Gas Law, do the following:
Step 1: Write Boyle's Law: 2211 VPVP
Step 2: Multiply by Charles Law:
2
222
1
111 T
VVP
TV
VP
2
222
1
211
TVP
TVP
Step 3: Multiply by Gay-Lussac's Law:
2
222
2
2
1
211
1
1
TVP
TP
TVP
TP
22
22
22
21
21
21
TVP
TVP
Step 4: Take the square root to get the combined gas law: 2
22
1
11
T
VP
T
VP
*
![Page 32: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/32.jpg)
Problems
1. 2.00 L of a gas is collected at 25.0°C and 745.0 mm Hg. What is the volume at STP?
21
21
21
TT
VV
PP
K15.273TK2.298T
?VL00.2V
Hgmm760PHgmm0.745P
21
21
21
2
22
1
11
TVP
TVP
K15.273
VHgmm760K2.298
L00.2Hgmm0.745 2
2V
Hgmm760K2.298K15.273L00.2Hgmm0.745
2VL80.1
*
![Page 33: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/33.jpg)
2. A container is reduced to a volume of 125 cm3 when a temperature of –75.00 C is reached. If the pressure changes from 1.20 atm to 852 torr and the initial temperature was 20.00 C, calculate the initial volume.
21
21
21
TT
VV
PP
C00.75TC00.20T
cm125V?V
torr852Patm20.1P
21
321
21
2
22
1
11
TVP
TVP
K15.198
cm125torr852K15.293Vtorr912 3
1
torr912K15.198
K15.293cm125torr852V
3
1
31 cm173V
*
![Page 34: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/34.jpg)
Molar Volume
- The molar volume is the volume occupied by one mole of ideal gas at STP or SATP (RTP).
- It is the volume of ANY ideal gas at Standard Temperature and Pressure (STP) or Standard Ambient Temperature and Pressure (SATP or RTP).
- Its value is:
molL
4.22:STP : T = 0 ° C and P = 1 atm
molL
8.24:)RTP(SATP : T = 25 °C and P = 1 atm
*
![Page 35: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/35.jpg)
Example #1: You have 2.00 L of dry H2 at STP.
a) How many moles is this?
b) What is the mass of the hydrogen gas?
Solution:
a) If 22.4 L of gas equals 1 mol of gas, we can set up a simple ratio:
molxL00.2
mol1L4.22
00.2x4.22
mol0893.0x b) nMm
molg
02.2mol0893.0m
g180.0m
*
![Page 36: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/36.jpg)
Example #2: 0.250 mol of HCl(g) will occupy how many litres at STP?
Solution:
mol250.0Lx
mol1L4.22
L60.5x
Example #3: What is the molar volume at 576 K?
Solution: Since 576 K is not a standard temperature, we must create a ratio to find the new volume.
K576mol
Lx
K15.273mol
L4.22
x15.2734.12902
xmol
L2.47
*
![Page 37: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/37.jpg)
Ideal Gas Law
- We can combine all gas laws into one convenient expression:
nRTPV where P =
V =
n =
T =
R =
pressure in kPa
volume in L
moles of gas
temperature in K
Universal Gas Constant = 8.314 kPa L mol –1 K –1
or
Kmol
LkPa314.8
*
![Page 38: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/38.jpg)
Example #1: What mass of hydrogen gas can be produced if the gas occupies a volume of 50.0 mL at 20.00 C and 94.5 kPa?
Given Information:
m =
V =
T =
P =
?
50.0 mL or 0.0500 L
20.00 C or 293.15 K
94.5 kPa
To solve for mass we need the formula:
m = nM
*
![Page 39: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/39.jpg)
Since number of moles is unknown, we need to use the given information to solve for moles.
nRTPV
RTPV
n
K15.293
KmolLkPa
314.8
L0500.0kPa5.94n
mol10x94.1n 3Now, calculate for mass:
nMm
molg
02.2mol10x94.1m 3
g00392.0m
*
![Page 40: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/40.jpg)
Example #2: A balloon has a volume of 10 000 L at 100 kPa and 20.00 C. If one was to fill this balloon with helium, how many moles of helium would be required?
Given: V =
P =
T =
n =
10 000 L
100 kPa
20.00 C or 293.15 K
?
nRTPV
RTPV
n
K15.293
KmolLkPa
314.8
L10000kPa100n
mol410n
*
![Page 41: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/41.jpg)
Example #3: A storage tank contains 2.65 kg of methane gas at 735.2 kPa and 25.00 C. What is the tank’s volume?
Given: m =
P =
T =
V =
2.65 kg or 2.65 x 10 3 g
735.2 kPa
25.00 C or 298.15 K
?
Mm
n
molg
05.16
g1065.2n
3
mol165n
nRTPV
PnRT
V
kPa2.735
K15.298KmolLkPa
314.8mol165V
L557V
*
![Page 42: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/42.jpg)
Example #4: If 38.5 g of nitrogen gas is found in a container with a volume of 15.27 L and 1.19 atm, what is the temperature in degrees Celsius?
Given: m = V = P = T =
38.5 g
15.27 L
1.19 atm or 121 kPa
?
Mm
n
molg
02.28
g5.38n
mol37.1n
nRTPV
nRPV
T
KmolLkPa
314.8mol37.1
L27.15kPa121T
K161T
C112T *
![Page 43: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/43.jpg)
Dalton’s Law of Partial Pressure
- John Dalton’s law of partial pressure states that the total pressure exerted by a mixture of gases is the sum of the partial pressures of each gas in the container.
etcPPPP 3gas2gas1gastotal
Example: A container has Gas A at a pressure of 1.25 atm, Gas B at a pressure of 102 kPa and Gas C at a pressure of 720 mm Hg. What is the total pressure, in kPa, inside the container?
CGasBGasAGastotal PPPP
kPa0.96kPa102kPa127Ptotal
kPa325Ptotal
*
![Page 44: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/44.jpg)
Example: The total pressure inside a container is 140 kPa. If 7 molecules of Gas A, 2 molecules of Gas B and 1 molecule of Gas C exist, calculate the pressure exerted by each gas.
Total molecules = 10 molecules
Gas A: 7 molecules or 70 %
Gas B: 2 molecules or 20 %
Gas C: 1 molecule or 10 %
Gas A: 70 % of 140 kPa = 98.0 kPa
Gas B: 20 % of 140 kPa = 28.0 kPa
Gas C: 10 % of 140 kPa = 14.0 kPa
*
![Page 45: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/45.jpg)
Ideal Gases vs Real Gases
- We have assumed that all gases obey the Ideal Gas Law ( PV = nRT ).
- In an “Ideal” gas, molecules have no volume and no intermolecular forces. This assumption must be made in order to make the Ideal Gas Law formula work in all cases.
- While the Ideal Gas Law does a very good job of predicting gas behavior, it's not perfect.
- Real gases differ in two major ways from an ideal gas
1) Particles in a real gas have volume.
2) Particles in a real gas attract each other, especially when they are condensed.
*
![Page 46: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/46.jpg)
Summary
Temperature Pressure MolarVolume
STP
SATP
273.15 K
101.325 kPa1.0 atm
760 mm Hg760 torr
100 kPa 298.15 K
molL
4.22
mol
L8.24
*
![Page 47: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/47.jpg)
2211 VPVP
2
2
1
1
TV
TV
2
2
1
1
TP
TP
2
2
1
1
nV
nV
2
22
1
11
TVP
TVP
nRTPV
KmolkPaL
314.8
etcPPPP 3gas2gas1gastotal
- Boyle's Law:
- Charles’ Law:
- Gay-Lussac’s Law:
- Avogadro's Law:
- Combined Gas Law:
- Ideal Gas Law:
- R =
- Dalton’s Law of Partial Pressure:
*
![Page 48: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/48.jpg)
Gas Law Stoichiometry
- In our stoichiometry unit, we looked at four different types of questions:
Mole to Mole
Mole to Mass
Mass to Mole
Mass to Mass
Given – moles
Required - moles
Given – moles
Required - mass
Given –Mass
Required - moles
Given –mass
Required - mass
*
![Page 49: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/49.jpg)
- To solve these questions, we look at our given information, looked at our required information and then decided on the steps to take:
MASS of REQUIRED
MASS of GIVEN ?
G
GG M
mn
Moles of given
nG
Moles of required
nR
RRR Mnm
*
![Page 50: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/50.jpg)
- Now, we are going to include volume to stoichiometry questions. We use the Ideal Gas Law to do this:
VOLUME of GIVEN
VOLUME of REQUIRED
Moles of required
nR
RRR Mnm
MASS of GIVEN
MASS of REQUIRED?
G
GG M
mn
Moles of givennG
RTPV
n RR
PRTn
V RR
*
![Page 51: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/51.jpg)
Problems
1. What volume of CO2(g) is produced at 94.5 kPa and 115.5 C in the
exhaust of a car if 100 g of gasoline (C8H18(g)) are burned?
)l(18H8Cm
T
P
V ?
94.5 kPA
115.5º C or 388.7 K
100 g
*
![Page 52: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/52.jpg)
)g(2)g(2)g(2)l(188 OH18CO16O25HC2
g100m
Mm
n
molg
26.114
g100n
mol875.0n
216
mol875.0n2CO
mol00.7n2CO
?V
PnRT
V
kPa5.94
K7.388314.8mol00.7V Kmol
LkPa
L239V
*
![Page 53: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/53.jpg)
2. How many moles of sodium must react with H2O(l) to produce
250 mL of H2(g) at 23.6 C and 102.6 kPa?
2 Na(s) + 2 HOH(l) H2(g) + 2 NaOH(aq)
n = ?
V = 0.250 L
T = 23.6 C or 296.8 K
P = 102.6 kPa
RTPV
n2H
K8.296314.8
L250.0kPa6.102n
KmolLkPa2H
mol0104.0n2H
12
mol0104.0n)s(Na
mol0208.0n)s(Na
*
![Page 54: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/54.jpg)
3. If 17.8 L of hydrogen, at 22.5 C and 21.4 kPa, react with nitrogen to produce 22.7 L of ammonia at 33.9 kPa, what’s the temperature of the ammonia (in C)?
3 H2(g) + N2(g) 2 NH3(g)
V = 17.8 L
T = 22.5 C or 295.7 K
P = 21.4 kPa
V = 22.7 L
P = 33.9 kPa
T = ? C
RTPV
n2H
K7.295314.8
L8.17kPa4.21n
KmolLkPa2H
mol155.0n2H
32
mol155.0n3NH
mol103.0n3NH
Kmol
LkPa3NH 314.8mol103.0L7.22kPa9.33
nRPV
T
C623orK896T3NH
*
![Page 55: C20 Unit 02 - Gases](https://reader035.fdocuments.in/reader035/viewer/2022081421/5571f23b49795947648c5d4a/html5/thumbnails/55.jpg)
4. What volume of carbon monoxide gas could be produced at STP by the incomplete combustion of 50.0 kmol of coal (assume pure carbon)?
2 C(s) + O2(g) 2 CO(g)
kmol0.50nC V = ?
T = 273.15 K
P = 101.325 kPa
22
kmol0.50n)g(CO
kmol0.50n)g(CO
PnRT
V)g(CO
kPa325.101
K15.273314.8kmol0.50V Kmol
LkPa
)g(CO
L1120636V)g(CO
kL1012.1orkL636.1120V 6
)g(CO
ML12.1V)g(CO
*