7/27/2019 C02S1

1/4

SET UP A 150-TPH CRUSHER PLANT

09/25/9862G1@BCL@24010A59

C-I-1

SECTION I. ADMINISTRATIVE DATA

All Courses COURSE NUMBER(S) COURSE TITLE(S)

Including this

Lesson713-62G10 Quarry Specialist Course

Task(s) Taught TASK NUMBER (S) TASK TITLE (S)

or Supported 051-251-XXXX Set Up a 150-TPH Crusher Plant

Reinforced TASK NUMBER (S) TASK TITLE (S)

Task(s) None

Academic The academic hours required to teach this lesson are as follows:

Hours

Peacetime Mobilization IDT ADT DL

Hrs Meth Hrs Meth Hrs Meth Hrs Meth Hrs Meth

2.0 CO 2.0 CO 00.0 2.0 CO 00.03.0 DM 3.0 DM 00.0 3.0 DM 00.06.0 PE1 6.0 PE1 00.0 6.0 PE1 00.02.0 PE2 2.0 PE2 00.0 2.0 PE2 00.0

Test 6.0 TE1 6.0 TE1 00.0 6.0 TE1 00.0

2.0 TE2 2.0 TE2 00.0 2.0 TE2 00.0

Total Hours 21.0 21.0 00.0 21.0 00.0

Test Lesson

Number

Refer to Appendix C, Test and Test Solutions

7/27/2019 C02S1

2/4

SET UP A 150-TPH CRUSHER PLANT

09/25/9862G1@BCL@24010A59

C-I-2

Prerequisite LESSON NUMBER(S) LESSON TITLE(S)

Lesson(s)051-62G1-B01 Introduction to Course

051-62G1-B02 Introduction to Safety

051-62G1-B03 Introduction to Environmental Stewardship

051-62G1-B04 Utilize The Army Maintenance Management System(TAMMS)

051-62G1-C01 Introduction to Rock Crushing Operations

Clearance

and Access

Unclassified

References

Required Number Title Date

Additional

Information

*TM 5-332 Pits and Quarries Dec 67

TM 5-3820-255-12&P Operation, Model M150 Jun 97

TM 5-3820-256-14&P Primary Crusher Unit, Model M3042 Jun 97

TM 5-3820-257-14&P Portable Surge Bin Feeder, Model PSF-12 Jun 97

TM 5-3820-258-14&P Secondary Crusher and Screening Unit,Model M1313

Jun 97

TM 5-3820-259-14&P Tertiary Crusher Unit, Model MC45 Jun 97

TM 5-3820-260-14&P Washing and Screening Unit , Model M1122 Jun 97TM 5-3820-262-14&P Product Conveyor, Model PC1245 Jun 97

TM 5-3820-263-14&P Water Pump Unit, Model GB2060 Jun 97

Instructor

Requirements

Two ITC certified instructors

Additional

Support

Personnel

Requirements

Assign alternate instructors as needed.

7/27/2019 C02S1

3/4

SET UP A 150-TPH CRUSHER PLANT

09/25/9862G1@BCL@24010A59

C-I-3

* This reference is currently being revised as a Field Manual.

Equipment

Required

150-TPH crusher plant

General mechanics tool kit drive set with sockets

18 pipe wrench

24 adjustable wrench

12 ruler

Replacement screens

Cone and jaw adjustment pump

Grease gun

Materials Instructor Materials Student Materials

Required

TM 5-3820-255-12&P TM 5-3820-255-12&P

TM 5-3820-256-14&P TM 5-3820-256-14&P

TM 5-3820-257-14&P TM 5-3820-257-14&P

TM 5-3820-258-14&P TM 5-3820-258-14&P

TM 5-3820-259-14&P TM 5-3820-259-14&P

TM 5-3820-260-14&P TM 5-3820-260-14&P

TM 5-3820-262-14&P TM 5-3820-262-14&P

TM 5-3820-263-14&P TM 5-3820-263-14&P

Job specifications Job specifications

C02 TSP Equipment records folder

Equipment records folder Student guides Coveralls Coveralls

Safety boots Safety boots

Goggles Goggles

Gloves Gloves

Double hearing protection Double hearing protection

Hard hat Hard hats

Pencils

Paper

Classroom,

Training Area,

and Range

Requirements

NOTE: Refer to the Facilities Summary of the POI.

Ammunition

Requirements

None

7/27/2019 C02S1

4/4

SET UP A 150-TPH CRUSHER PLANT

09/25/9862G1@BCL@24010A59

C-I-4

Instructional

Guidance

Before presenting this lesson,

a. Ensure classroom is available and ready for training

b. Ensure overhead projector, screen, and VGTs are on hand

c. Ensure all materials are on hand and in quantities needed.

d. Read and understand C02 TSP prior to conducting training.

e. Ensure equipment is available and on site.

Proponent Name Rank Position Date

Lesson Plan

Approvals