C SEESin c.com ONS TABLE OF CONTENTS TRUCTION...

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

67

Cable Cross-Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68-69Super-Flex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-77Round Cable Hanging Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78Mesh Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79-82Flat Traveling Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Flat Cable Suspension Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84-85Super-Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86-87Stationary Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88Door Lock Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88Hook-up Wire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89-91Power and Specialty Wire and Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Rails, Ferrules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93-95EMT Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96-97Metal Wireway Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98-103Flexible Conduit and Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104-105Threaded Fittings for Rigid Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Electrical Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Box Covers, Plates and Fixtures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Junction Boxes and Knockout Punches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109Wire Rope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110-115Wire Rope Wedge Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Wire Rope Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117-119Compensating Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121-130Load Weighing Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131-134Seismic Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135Hardware for Rail Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Hydraulic Ball Valves and Pipe Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138Hydraulic Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139-141Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143-150Hardware for Electrical Work. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151-152Strut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154Buffers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155-156Pit Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157Switches and Pushbuttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159-161Inspection Stations and Stop Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162Pendant Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163Top of Car Safety Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153Hoistway Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165Hoistway Scaffold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166Car Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167-168Hoistway/ Hatch Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169-172

TABLE OF CONTENTS

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

68

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Internal Componentsfor Draka Elevator Products cablesTraveling and hoistway cables

Jacket - Black, 70° C polyvinyl chloride specifically compounded for flexibilityand abrasion resistance. The finished cable complies with ANSI/ASTM, UL andCSA standards. It also meets EN or JIS requirements as needed and the ULVW-1 or UL-1581 and CSA FT1 flame requirements. Operating temperaturesrange from -15° C to +70° C. Optional rugged polyurethane (PUR) jackets areavailable upon request. Operating temperatures for PUR cables range from -20° C to +70° C.

Any traveling cable can be custom-made with halogen-free materials.

Binder - Helically-wound synthetic fiber provides maximum strength.

Braid - A rayon or cotton braid is applied over the core assembly with 95%coverage.

Stranded Conductors - Bunch-stranded bare soft drawn copper. AWG sizescomply with ANSI/ASTM B174, ANSI/ASTM B3 and with Type ETTrequirements of UL 62 and CSA C22.2 No. 49. Metric sizes meet the intent ofEN50214, JIS 3408 and AS.

Insulation - 70° C, colored, flame-retardant polyvinyl chloride to exceed ETTrequirements of UL 62 and CSA C22.2 No. 49. Also complies with EN and JISrequirements for elevator control cables

Identification - Each insulated conductor and shielded pair is positivelyidentified by an insulation color or a combination of insulation color andnumerical markings appearing four times/foot • thirteen times/meter.

Steel Support for Round Traveling Cables - Preformed, flexible, low torsion,zinc-coated, steel wire rope in accordance with applicable portions of MilitarySpecification MIL-W-83420. The steel support is insulated with 70° C flame-retardant polyvinyl chloride (Super-Flex® cables have the steel covered with arayon or cotton braid). Complies with ANSI/ASTM, UL and CSA requirements.

Steel Support for Flat Traveling Cables - Preformed, flexible, low torsion,zinc-coated, steel wire rope in accordance with applicable portions of MilitarySpecification MIL-W-83420. Complies with ANSI/ASTM, UL and CSArequirements.

Shielded Pairs - 20 AWG insulated conductors, paired together with a shortlay twist, shielded with 36 AWG bare copper braid for 85% coverage. Theyare jacketed with colored, flame-retardant 70° C polyvinyl chloride andcomply with international requirements.

Jute Filler - Individual core interstice fillers distribute interlayer pressure andreduce conductor friction. All fillers are electrical-grade dry jute.

Coaxial cable specificationsRG6/U Coaxial Cable - Primarily for CCTV applications. 75 ohm, UL listed,CSA certified. Center conductor is 20 AWG stranded copper insulated withcellular polyethylene, wrapped with aluminum tape, braided with tinnedcopper and jacketed with flame-retardant PVC.

Attenuation is 2.13 dB/100m @ 10 MHz and 5.08 dB/100m @ 50 MHz.Capacitance measures 56.7 pf/m.

RG11/U Coaxial Cable - Optional 75 ohm, UL listed. Center conductor is 14AWG • 2.0 mm2 soft drawn stranded copper insulated with cellularpolyethylene, braided with bare copper for 97% coverage, and jacketed withflame-retardant PVC.

Attenuation is 2.16 dB/100m @ 10 MHz and 4.26 dB/100m @ 50 MHz.Capacitance measures 56.7 pf/m.

Fiber optic specifications62.5/125 micron tight-buffered multimode optical fiber, coveredwith high-strength aramid yarn and jacketed with flame-retardantpolyvinyl chloride.

Maximum attenuation is 3.75 dB/km @ 850 nm and 1.5 dB/km @1300 nm. Minimum bandwidth is 160 MHz•km @ 850 nm and500 MHz•km @ 1300 nm.

TYPICAL FLAT CABLE CROSS-SECTION

PVC jacket (Halogen-free styles available)Stranded conductors18 AWG or 0.75 mm2

16 AWG or 1.3 mm2

14 AWG or 2.0 mm2

Shielded pair 20 AWG or 0.5 mm2

TYPICAL SUPER-FLEX®

ROUND CABLE CROSS-SECTION

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

69

14 AWG conductorsConductor InsulationNumber(s) Color

1* Black2* White3* Green4 to 10* Lavender11 to 20 Orange21 to 30 Tan

16 AWG and 18 AWG conductorsConductor InsulationNumber(s) Color

1 to 10 Yellow11 to 20 Orange21 to 30 Tan31 to 40 Blue41 to 50 Red51 to 60 Grey61 to 70 Black71 to 80 Pink81 to 90 Brown

Shielded pair 20 AWGConductor Jacket InsulationNumber(s) Color Color

1 Red Red/White2 Black Red/White3 Yellow Red/White4 Orange Red/White5 Tan Red/White6 Blue Red/White7 Grey Red/White8 Pink Red/White9 Red Black/White10 Black Black/White11 Yellow Black/White12 Orange Black/White13 Tan Black/White14 Blue Black/White15 Grey Black/White16 Pink Black/White

AWG to metric conversionsAWG Metric equivalent

12 AWG 3.31 mm2 - 65 strands14 AWG 2.08 mm2 - 41 strands16 AWG 1.31 mm2 - 26 strands18 AWG 0.82 mm2 - 16 strands20 AWG 0.52 mm2 - 10 strands

Standards and certifications

ISO 9001Draka EP’s Rocky Mount manufacturing and distributioncenter was assessed and registered by Lloyd’s RegisterQualityAssurance Limited for ISO 9001, EN ISO 9001and ANSI/ASQC Q9001.

UL ListedListed cables are approved for use in the US and meetall pertinent requirements of Underwriter’s Laboratories.

NEC CompliantCompliant cables meet all pertinent requirements of the2008 National Electric Code.

CSA CertifiedCertified cables meet all pertinent requirements of theCanadian Standards Association.

US Dept. of Labor Mine Safety Approved cables meet all pertinent requirements of theUS DOL for mine safety.

Bureau VeritasETT round traveling cables are certified and approvedfor marine and offshore applications.

Pennsylvania Bureau of Deep Mine SafetyApproved cables meet all pertinent requirements of the PBDMS.

IEC CompliantCompliant cables are approved for use in Europe and meet IECrequirements.

JIS (Japanese Standards)Compliant cables are available upon request.

Standards and Insulation Color Keyfor Draka Elevator Products cables

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

70

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Power/signal conductors onlyPart Product Number/Size* Max. Hang Length Cable Nom. OD Cable Net WeightNumber Code of Conductors feet • meters inches • mm lbs/kft • kg/km

18-406-03 J 6-18 SP† † 6 / 18 AWG • 0.75 mm2 200 • 61 0.43 • 10.9 96 • 143 NOTE: Insulation colors are green, yellow, blue, red, black and white.18-410-01 J 10-18 10 / 18 AWG • 0.75 mm2 200 • 61 0.54 • 13.7 160 • 23818-416-01 J 16-18 16 / 18 AWG • 0.75 mm2 200 • 61 0.64 • 16.3 219 • 32618-420-01 J 20-18 20 / 18 AWG • 0.75 mm2 200 • 61 0.71 • 18.0 266 • 39618-424-01 J 24-18 24 / 18 AWG • 0.75 mm2 200 • 61 0.73 • 18.5 304 • 45218-430-01 J 30-18 30 / 18 AWG • 0.75 mm2 200 • 61 0.82 • 20.8 378 • 56218-440-01 J 40-18 40 / 18 AWG • 0.75 mm2 200 • 61 0.92 • 23.4 475 • 707

*NOTE: Metric equivalents for AWG sizes are approximate on these cables.††“SP” Denotes special color coding and/or conductor numbering

Shielded pairs onlyPart Product Number/Size* Max. Hang Length Cable Nom. OD Cable Net WeightNumber Code of Conductors feet • meters inches • mm lbs/kft • kg/km

18-102-28 JCC 4x20SH 4 sh. pairs / 20 AWG • 0.5 mm2 200 • 61 0.79 • 20.1 270 • 402

18-008-14 JCC 8x20SH 8 sh. pairs / 20 AWG • 0.5 mm2 200 • 61 1.00 • 25.4 420 • 625

*NOTE: Metric equivalents for AWG sizes are approximate on these cables.

Super-Flex® Traveling Cable Type ETT/300VJute center - UL listed, CSA certified, NEC/CEC compliant

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

71

Power/signal and shielded pairsPart Product Number/Size* Max. Hang Length Cable Nom. OD Cable Net WeightNumber Code of Conductors feet • meters inches • mm lbs/kft • kg/km

18-027-02 JC 27 3 / 14 AWG • 2.0 mm2 200 • 61 0.94 • 23.8 466 • 693 20 / 18 AWG • 0.75 mm2

2 sh. pair / 20 AWG • 0.5 mm2

18-322-05 JC 33 SP † † 3 / 14 AWG • 2.0 mm2 200 • 61 1.23 • 31.2 719 • 1070 22 / 18 AWG • 0.75 mm2

4 sh. pair / 20 AWG • 0.5 mm2

18-431-02 JC 37 4 / 14 AWG • 2.0 mm2 200 • 61 1.19 • 30.2 672 • 1000 31 / 18 AWG • 0.75 mm2

1 sh. pair / 20 AWG • 0.5 mm2

18-038-02 JC 38 W 12 / 14 AWG • 2.0 mm2 200 • 61 1.25 • 31.8 806 • 1199 18 / 18 AWG • 0.75 mm2

4 sh. pair / 20 AWG • 0.5 mm2

18-838-02 JC 38 SP † † 8 / 14 AWG • 2.0 mm2 200 • 61 1.25 • 31.8 777 • 1157 24 / 18 AWG • 0.75 mm2

3 sh. pair / 20 AWG • 0.5 mm2

18-842-02 JC 42 SP-HI † † 26 / 18 AWG • 0.75 mm2 200 • 61 1.16 • 29.5 700 • 1042 8 sh. pair / 20 AWG • 0.5 mm2

18-044-05 JC 44 SP † † 8 / 14 AWG • 2.0 mm2 200 • 61 1.32 • 33.5 797 • 1186 30 / 18 AWG • 0.75 mm2

3 sh. pair / 20 AWG • 0.5 mm2

18-032-99 JC 45 4 / 14 AWG • 2.0 mm2 200 • 61 0.99 • 25.1 617 • 918 39 / 18 AWG • 0.75 mm2

1 sh. pair / 20 AWG • 0.5 mm2

18-045-02 JC 45 D 4 / 14 AWG • 2.0 mm2 200 • 61 1.31 • 33.3 805 • 1198 31 / 18 AWG • 0.75 mm2

5 sh. pair / 20 AWG • 0.5 mm2

18-847-02 JC 46 8 / 14 AWG • 2.0 mm2 200 • 61 1.26 • 32.0 825 • 1228 30 / 18 AWG • 0.75 mm2

4 sh. pair / 20 AWG • 0.5 mm2

18-445-02 JC 51 4 / 14 AWG • 2.0 mm2 200 • 61 1.20 • 30.5 757 • 1126 45 / 18 AWG • 0.75 mm2

1 sh. pair / 20 AWG • 0.5 mm2

18-752-02 JC 52-0/SP †† 10 / 14 AWG • 2.0 mm2 200 • 61 1.22 • 31.0 840 • 1250 42 / 18 AWG • 0.75 mm2

18-055-02 JC 55 D 4 / 14 AWG • 2.0 mm2 200 • 61 1.39 • 35.3 917 • 1365 41 / 18 AWG • 0.75 mm2

5 sh. pair / 20 AWG • 0.5 mm2

18-057-02 JC 57 6 / 14 AWG • 2.0 mm2 200 • 61 1.39 • 35.3 943 • 1403 45 / 18 AWG • 0.75 mm2

3 sh. pair / 20 AWG • 0.5 mm2

18-059-02 JC 59 4 / 14 AWG • 2.0 mm2 200 • 61 1.22 • 30.1 872 • 1298 49 / 18 AWG • 0.75 mm2

3 sh. pair / 20 AWG • 0.5 mm2

RG11/U coax and multimode optical fiber are available as options. See page 6 for specifics on these cables.*NOTE: Metric equivalents for AWG sizes are approximate on these cables.††“SP” Denotes special color coding and/or conductor numbering


800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

72

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Power/signal and shielded pairsPart Product Number/Size* Max. Hang Length Cable Nom. OD Cable Net WeightNumber Code of Conductors feet • meters inches • mm lbs/kft • kg/km

18-454-02 JC 60 4 / 14 AWG • 2.0 mm2 200 • 61 1.26 • 32.0 855 • 1272 54 / 18 AWG • 0.75 mm2

1 sh. pair / 20 AWG • 0.5 mm2

18-456-02 JC 66 4 / 14 AWG • 2.0 mm2 200 • 61 1.33 • 33.8 955 • 1421 56 / 18 AWG • 0.75 mm2

3 sh. pair / 20 AWG • 0.5 mm2

18-X66-02 JCX66-6 15 / 14 AWG • 2.0 mm2 200 • 61 1.68 • 42.7 1345 • 2002 32 / 18 AWG • 0.75 mm2 9 sh. pair / 20 AWG • 0.5 mm2

1 coax / RG6/U18-073-02 JC 73 6 / 14 AWG • 2.0 mm2 200 • 61 1.35 • 34.3 1042 • 1551 61 / 18 AWG • 0.75 mm2

3 sh. pair / 20 AWG • 0.5 mm2

18-173-05 JC 73 O †† 12 / 14 AWG • 2.0 mm2 200 • 61 1.43 • 39.3 1118 • 1664 53 / 18 AWG • 0.75 mm2

4 sh. pair / 20 AWG • 0.5 mm2

18-174-05 JC 74 O †† 12 / 14 AWG • 2.0 mm2 200 • 61 1.47 • 37.3 1200 • 1786 53 / 18 AWG • 0.75 mm2 4 sh. pair / 20 AWG • 0.5 mm2

1 coax / RG6/U18-076-02 JC 76 66 / 18 AWG • 0.75 mm2 200 • 61 1.42 • 36.1 1017 • 1513 5 sh. pair / 20 AWG • 0.5 mm2

18-764-05 JC 79 SP †† 7 / 14 AWG • 2.0 mm2 200 • 61 1.45 • 36.8 1200 • 1786 64 / 18 AWG • 0.75 mm2

4 sh. pair / 20 AWG • 0.5 mm2

NOTE: 14 AWG • 2.0 mm2 conductor #7 is dark blue18-476-02 JC 86 4 / 14 AWG • 2.0 mm2 200 • 61 1.39 • 35.3 1128 • 1679 76 / 18 AWG • 0.75 mm2

3 sh. pair / 20 AWG • 0.5 mm2

18-096-02 JC 96 86 / 18 AWG • 0.75 mm2 200 • 61 1.42 • 36.1 1180 • 1756 5 sh. pair / 20 AWG • 0.5 mm2

18-496-02 JC 96C 4 / 14 AWG • 2.0 mm2 200 • 61 1.42 • 35.8 1240 • 1846 90 / 18 AWG • 0.75 mm2

1 sh. pair / 20 AWG • 0.5 mm2

RG11/U coax and multimode optical fiber are available as options. See page 6 for specifics on these cables.*NOTE: Metric equivalents for AWG sizes are approximate on these cables.†† “SP” or “O” denotes special color coding and/or conductor numbering


954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

73

Super-Flex® Traveling Cable Type ETT/300VSteel center - UL listed, CSA certified, NEC/CEC compliant

Power/signal conductors onlyPart Product Number/Size* Steel Core Dia. Max. Hang Length† Cable Nom. OD Cable Net WeightNumber Code of Conductors inches • mm feet • meters inches • mm lbs/kft • kg/km

18-004-11 WS 4-14 4 / 14 AWG • 2.0 mm2 3/32 • 2.4 900 • 275 0.57 • 14.4 166 • 24718-008-11 WS 8-14 8 / 14 AWG • 2.0 mm2 1/8 • 3.2 900 • 275 0.70 • 17.8 293 • 43618-015-11 WS 15-14 15 / 14 AWG • 2.0 mm2 1/8 • 3.2 900 • 275 0.93 • 23.6 487 • 72518-412-11 WS 12-18 12 / 18 AWG • 0.75 mm2 3/32 • 2.4 900 • 275 0.65 • 16.5 280 • 41718-420-11 WS 20-18 20 / 18 AWG • 0.75 mm2 3/32 • 2.4 804 • 245 0.71 • 18.0 286 • 42618-430-11 WS 30-18 30 / 18 AWG • 0.75 mm2 1/8 • 3.2 900 • 275 0.82 • 20.8 417 • 62018-440-11 WS 40-18 40 / 18 AWG • 0.75 mm2 1/8 • 3.2 900 • 275 0.92 • 23.4 509 • 75718-450-11 WS 50-18 50 / 18 AWG • 0.75 mm2 1/8 • 3.2 795 • 242 1.01 • 25.7 629 • 936*NOTE: Metric equivalents for AWG sizes are approximate on these cables.

Shielded pairs onlyPart Product Number/Size* Steel Core Dia. Max. Hang Length† Cable Nom. OD Cable Net WeightNumber Code of Conductors inches • mm feet • meters inches • mm lbs/kft • kg/km

18-002-15 WSCC 4x20 SH 4 sh. pair / 20 AWG • 0.5 mm2 1/8 • 3.2 900 • 275 0.79 • 20.0 330 • 49118-003-15 WSCC 6x20 SH 6 sh. pair / 20 AWG • 0.5 mm2 1/8 • 3.2 900 • 275 0.85 • 21.6 365 • 54318-004-15 WSCC 8x20 SH 8 sh. pair / 20 AWG • 0.5 mm2 5/32 • 4.0 900 • 275 1.00 • 25.4 490 • 72918-403-15 WSCC 6x18 SH 6 sh. pair / 18 AWG • 0.75 mm2 5/32 • 4.0 900 • 275 0.93 • 23.6 418 • 62218-407-15 WSCC 14x18 SH 14 sh. pair / 18 AWG • 0.75 mm2 5/32 • 4.0 714 • 218 1.44 • 36.6 981 • 1460RG11/U coax and multimode optical fiber are available as options. See page 6 for specifics on these cables.*NOTE: Metric equivalents for AWG sizes are approximate on these cables.

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

74

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N


Power/signal and shielded pairsPart Product Number/Size* Steel Core Dia. Max. Hang Length† Cable Nom. OD Cable Net WeightNumber Code of Conductors inches • mm feet • meters inches • mm lbs/kft • kg/km

18-020-12 CWS 20 14 / 18 AWG • 0.75 mm2 3/32 • 2.4 612 • 187 0.95 • 24.1 376 • 560 3 sh. pairs / 20 AWG • 0.5 mm2

18-421-12 CWS 27 4 / 14 AWG • 2.0 mm2 5/32 • 4.0 900 • 275 0.96 • 24.4 500 • 744 21 / 18 AWG • 0.75 mm2

1 sh. pair / 20 AWG • 0.5 mm2

18-431-12 CWS 37 4 / 14 AWG • 2.0 mm2 5/32 • 4.0 900 • 275 1.18 • 30.0 700 • 1042 31 / 18 AWG • 0.75 mm2

1 sh. pair / 20 AWG • 0.5 mm2

18-044-12 CWS 44 14 / 14 AWG • 2.0 mm2 5/32 • 4.0 753 • 230 1.33 • 33.8 929 • 1382 24 / 18 AWG • 0.75 mm2

3 sh. pairs / 20 AWG • 0.5 mm2

18-045-12 CWS 45 D 4 / 14 AWG • 2.0 mm2 5/32 • 4.0 776 • 237 1.31 • 33.3 902 • 1342 31 / 18 AWG • 0.75 mm2


18-A46-12 CWS 46 8 / 14 AWG • 2.0 mm2 5/32 • 4.0 769 • 234 1.32 • 33.5 910 • 1354 30 / 18 AWG • 0.75 mm2


18-441-12 CWS 47 4 / 14 AWG • 2.0 mm2 5/32 • 4.0 900 • 275 1.20 • 30.5 771 • 1147 41 / 18 AWG • 0.75 mm2

1 sh. pair / 20 AWG • 0.5 mm2

18-47L-12 CWS 47 LO 11 / 14 AWG • 2.0 mm2 5/32 • 4.0 695 • 212 1.40 • 35.6 1012 • 1498 NOTE ON CWS 47 LO: 14 AWG • 2.0 mm2 conductors are numbered 1 to 11 22 / 18 AWG • 0.75 mm2 conductors are numbered 1 to 22 7 sh. pairs / 20 AWG • 0.5 mm2 pairs have red/white conductors within red, black, yellow, orange, tan, blue and gray jackets18-648-12 CWS 56 6 / 14 AWG • 2.0 mm2 5/32 • 4.0 826 • 252 1.20 • 30.5 847 • 1260 48 / 18 AWG • 0.75 mm2

1 sh. pair / 20 AWG • 0.5 mm2

RG11/U coax and multimode optical fiber are available as options. See page 6 for specifics on these cables.*NOTE: Metric equivalents for AWG sizes are approximate on these cables.

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

75

Power/signal and shielded pairsPart Product Number/Size* Steel Core Dia. Max. Hang Length† Cable Nom. OD Cable Net WeightNumber Code of Conductors inches • mm feet • meters inches • mm lbs/kft • kg/km

18-L58-12 CWS 58 LO 4 / 14 AWG • 2.0 mm2 5/32 • 4.0 622 • 190 1.51 • 38.4 1125 • 167418-H58-12 CWS 58 HI 40 / 18 AWG • 0.75 mm2

7 sh. pair / 20 AWG • 0.5 mm2

NOTE ON CWS 58 LO: 14 AWG • 2.0 mm2 conductors are numbered 1 to 4 18 AWG • 0.75 mm2 conductors are numbered 1 to 40 20 AWG • 0.5 mm2 pairs have red/white conductors in red, black, yellow, orange, tan, blue and gray jackets NOTE ON CWS 58 HI: 14 AWG • 2.0 mm2 conductors are numbered 5 to 8 (#8 is dark blue) 18 AWG • 0.75 mm2 conductors are numbered 41 to 80 20 AWG • 0.5 mm2 pairs have black/white conductors in red, black, yellow, orange, tan, blue and gray jackets18-059-12 CWS 59 4 / 14 AWG • 2.0 mm2 5/32 • 4.0 791 • 241 1.22 • 31.0 885 • 1317 49 / 18 AWG • 0.75 mm2

3 sh. pair / 20 AWG • 0.5 mm2

18-X60-12 CWS 60 7 / 14 AWG • 2.0 mm2 1/4 • 6.4 900 • 275 1.58 • 40.1 1289 • 1918 27 / 18 AWG • 0.75 mm2

13 sh. pair / 20 AWG • 0.5 mm2

18-661-12 CWS 71 6 / 14 AWG • 2.0 mm2 5/32 • 4.0 614 • 187 1.39 • 35.3 1140 • 1696 61 / 18 AWG • 0.75 mm2

2 sh. pair / 20 AWG • 0.5 mm2

18-073-12 CWS 73 6 / 14 AWG • 2.0 mm2 5/32 • 4.0 608 • 185 1.39 • 35.3 1151 • 1709 61 / 18 AWG • 0.75 mm2

3 sh. pair / 20 AWG • 0.5 mm2

18-X74-12 CWS 74 20 / 14 AWG • 2.0 mm2 5/32 • 4.0 491 • 150 1.54 • 39.1 1426 • 2122 38 / 18 AWG • 0.75 mm2

8 sh. pair / 20 AWG • 0.5 mm2

18-469-12 CWS 75 4 / 14 AWG • 2.0 mm2 5/32 • 4.0 663 • 202 1.38 • 35.0 1056 • 1571 69 / 18 AWG • 0.75 mm2

1 sh. pair / 20 AWG • 0.5 mm2

18-881-12 CWS 81 8 / 14 AWG • 2.0 mm2 5/32 • 4.0 524 • 160 1.60 • 40.6 1336 • 1988 59 / 18 AWG • 0.75 mm2

7 sh. pair / 20 AWG • 0.5 mm2

18-X90-12 CWS 90 6 / 14 AWG • 2.0 mm2 5/32 • 4.0 555 • 169 1.46 • 37.1 1262 • 1878 80 / 18 AWG • 0.75 mm2

2 sh. pair / 20 AWG • 0.5 mm2

18-X94-12 CWS 94 12 / 14 AWG • 2.0 mm2 1/4 • 6.4 900 • 275 1.68 • 42.7 1663 • 2475 70 / 18 AWG • 0.75 mm2

6 sh. pair / 18 AWG • 0.75 mm2

18-096-12 CWS 96 86 / 18 AWG • 0.75 mm2 5/32 • 4.0 576 • 176 1.42 • 36.1 1215 • 1808 5 sh. pair / 20 AWG • 0.5 mm2

RG11/U coax and multimode optical fiber are available as options. See page 6 for specifics on these cables.*NOTE: Metric equivalents for AWG sizes are approximate on these cables.


800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

76

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N


Power/signal, shielded pairs and/or coaxPart Product Number/Size* Steel Core Dia. Max. Hang Length† Cable Nom. OD Cable Net WeightNumber Code of Conductors inches • mm feet • meters inches • mm lbs/kft • kg/km

18-X05-13 CSX 5 3 / 14 AWG • 2.0 mm2 5/32 • 4.0 900 • 275 1.10 • 27.9 500 • 742 2 coax / RG6/U18-309-13 CSX 9 4 / 14 AWG • 2.0 mm2 5/32 • 4.0 900 • 275 0.87 • 22.1 370 • 550 2 sh. pairs / 20 AWG • 0.5 mm2

1 coax / RG6/U18-214-13 CSX 14 6 sh. pairs / 20 AWG • 0.5 mm2 5/32 • 4.0 900 • 275 1.06 • 26.9 570 • 848 2 coax / RG6/U18-X36-13 CSX 36 17 / 14 AWG • 2.0 mm2 1/4 • 6.4 900 • 275 1.61 • 40.9 1271 • 1891 8 sh. pairs / 20 AWG • 0.5 mm2

3 coax / RG6/U18-X46-13 CSX 46 11 / 14 AWG • 2.0 mm2 5/32 • 4.0 683 • 208 1.44 • 36.6 1025 • 1525 22 / 18 AWG • 0.75 mm2


1 coax / RG6/U18-X47-13 CSX 47 4 / 14 AWG • 2.0 mm2 5/32 • 4.0 740 • 226 1.35 • 34.3 946 • 1408 30 / 18 AWG • 0.75 mm2


1 coax / RG6/U18-247-13 CSX 47 O 8 / 14 AWG • 2.0 mm2 5/32 • 4.0 642 • 196 1.41 • 35.8 1090 • 1622 30 / 18 AWG • 0.75 mm2

4 sh. pair / 20 AWG • 0.5 mm2

1 coax / RG6/U18-H49-13 CSX49 SP-HI † † 20 / 18 AWG • 0.75 mm2 5/32 • 4.0 659 • 201 1.50 • 38.1 1063 • 1582 14 sh. pair / 20 AWG • 0.5 mm2

1 coax / RG6/U 18-X53-13 CSX 53 4 / 14 AWG • 2.0 mm2 5/32 • 4.0 711 • 217 1.34 • 34.0 985 • 1466 45 / 18 AWG • 0.75 mm2

1 sh. pair / 20 AWG • 0.5 mm2

2 coax / RG6/U18-055-13 CSX 55 SP † † 4 / 14 AWG • 2.0 mm2 5/32 • 4.0 791 • 241 1.22 • 31.0 885 • 1317 46 / 18 AWG • 0.75 mm2

2 sh. pair / 20 AWG • 0.5 mm2

1 coax / RG6/U 18-855-13 CSX 55 SP † † 26 / 18 AWG • 0.75 mm2 5/32 • 4.0 649 • 198 1.50 • 38.1 1079 • 1606 HI NUMBERS 14 / 20 AWG • 0.5 mm2

1 coax / RG6/U 18-X57-13 CSX 57 4 / 14 AWG • 2.0 mm2 5/32 • 4.0 612 • 187 1.53 • 38.9 1144 • 1702 40 / 18 AWG • 0.75 mm2

6 sh. pair / 20 AWG • 0.5 mm2

1 coax / RG6/U RG6/U is the standard coaxial cable used in CSX-series Super-Flex cables and the preferred cable for CCTV purposes. RG11/U coax and multimode optical fiber are available as options. See page 6 for specifics on these cables.*NOTE: Metric equivalents for AWG sizes are approximate on these cables.††“SP” Denotes special color coding and/or conductor numbering

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

77


Power/signal, shielded pairs and/or coaxPart Product Number/Size* Steel Core Dia. Max. Hang Length† Cable Nom. OD Cable Net WeightNumber Code of Conductors inches • mm feet • meters inches • mm lbs/kft • kg/km

18-X61-13 CSX 61 7 / 14 AWG • 2.0 mm2 1/4 • 6.4 900 • 275 1.65 • 41.9 1373 • 2043 27 / 18 AWG • 0.75 mm2

13 sh. pair / 20 AWG • 0.5 mm2

1 coax / RG6/U 18-X62-13 CSX 62 SP † † 12 / 14 AWG • 2.0 mm2 5/32 • 4.0 525 • 160 1.59 • 40.4 1334 • 1985 29 / 18 AWG • 0.75 mm2

10 sh. pair / 20 AWG • 0.5 mm2

1 coax / RG6/U 18-175-13 CSX 75 O 20 / 14 AWG • 2.0 mm2 1/4 • 6.4 900 • 275 1.58 • 40.1 1472 • 2190 38 / 18 AWG • 0.75 mm2

8 sh. pair / 20 AWG • 0.5 mm2

1 coax / RG6/U 18-377-13 CSX 77 4 / 14 AWG • 2.0 mm2 5/32 • 4.0 532 • 162 1.64 • 41.6 1315 • 1957 69 / 18 AWG • 0.75 mm2

1 sh. pair / 20 AWG • 0.5 mm2

2 coax / RG6/U 18-X77-13 CSX 77 S 4 / 14 AWG • 2.0 mm2 1/4 • 6.4 900 • 275 1.52 • 38.6 1269 • 1888 60 / 18 AWG • 0.75 mm2

6 sh. pair / 20 AWG • 0.5 mm2

1 coax / RG6/U 18-083-13 CSX 83 20 / 14 AWG • 2.0 mm2 1/4 • 6.4 900 • 275 1.92 • 48.8 1808 • 2690 35 / 18 AWG • 0.75 mm2

13 sh. pair / 20 AWG • 0.5 mm2

2 coax / RG6/U RG6/U is the standard coaxial cable used in CSX-series Super-Flex cables and the preferred cable for CCTV purposes. RG11/U coax and multimode optical fiber are available as options. See page 6 for specifics on these cables.*NOTE: Metric equivalents for AWG sizes are approximate on these cables.††“SP” Denotes special color coding and/or conductor numbering

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

78

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Round Cable Hanging Componentsfor steel and jute center traveling cable installations

Universal hanging system US Patent 5,080,199

Part For Steel Core Dia. No. of Max. per Cable LoadNumber inches • mm Cables Held lbs • kg

3/32-1 SBKT 3/32 • 2.4 1 cable 500 • 2271/8-1 SBKT 1/8 • 3.2 1 cable 500 • 2275/32-1 SBKT-R 5/32 • 4.0 1 cable 700 • 3181/4-1 SBKT 1/4 • 6.4 1 cable 1250 • 5683/32 PINS-A Replacement strand vise for 3/32 in. rope* 1/8 PINS-A Replacement strand vise for 1/8 in. rope* 5/32 PINS-A Replacement strand vise for 5/32 in. rope*1/4 PINS-A Replacement strand vise for 1/4 in. rope*

The Universal Hanging System is based around our patented Steel-Core Hanging Devicewhich is designed to solidly grip and support the steel wire support member. It also safelysecures the cable to the welded steel bracket thus preventing rotation.

The Universal Hanging System is a safe and effective unit that saves time and labor. It alsohas the added benefit of not having to bend (and possibly compromise) the steel supportas required in other termination methods.

The Universal Hanging System is available in one and two cable configurations and comesas a kit with all installation hardware. Order two kits per cable, one for the car and one forthe hoistway.

*NOTE: Replacement strand vises are for use ONLY in Universal Hanging Systems.

Part For Steel Core Dia. No. of Max. per Cable LoadNumber inches • mm Cables Held lbs • kg

5/32-2 SBKT-R 5/32 • 4.0 2 cables 700 • 3181/4-2 SBKT 1/4 • 6.4 2 cables 1250 • 568

These are two-cable versions of the Universal Hanging System.

They use the same replacement strand vises as above.

Jute core traveling cable hanger for mesh grips

Part DescriptionNumber

HGRJC-8 Bracket used to hold/support grips that hold jute core cables - 8 in. • 20 cm clear between brackets

Beam padsPart DescriptionNumber

22-022 Scotch 2200 beam pads, 6-1/2 x 4-1/2 x 1/8 in. • 165 x 114 x 6 mm, packages of 10, may be purchased separately

NOTE: DEP recommends beam pads be applied to surfaces where there may be occasional contact by the traveling cable.

Steel bracket with welded steel supports safely bears cable weight

Strand vise firmly secures steelcenter support

Curved bracket improves cable grip

Stainless steel hose clamps keepcable from twisting

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

79

Mesh GripsTinned bronze for jute center traveling cables - with maximum hanging lengths of 200 ft • 61 m

Single eye/single weave/closed mesh - tinned bronzePart Cable Dia. Range Maximum Load* Eye Length Nom. Mesh LengthNumber inches • cm lbs • kg inches • mm inches • mm

022-01-013 .50 to .62 • 1.27 to 1.57 106 • 48 7.0 • 178 10.0 • 254022-01-014 .63 to .74 • 1.60 to 1.88 158 • 72 8.0 • 203 10.0 • 254022-01-015 .75 to .99 • 1.91 to 2.51 204 • 93 8.0 • 203 13.0 • 330022-01-017 1.00 to 1.24 • 2.54 to 3.15 322 • 146 9.0 • 229 14.0 • 356022-01-018 1.25 to 1.49 • 3.18 to 3.78 322 • 146 10.0 • 254 15.0 • 381022-01-019 1.50 to 1.74 • 3.81 to 4.42 322 • 146 12.0 • 305 17.0 • 432022-01-020 1.75 to 1.99 • 4.45 to 5.05 430 • 195 14.0 • 356 19.0 • 483

Single eye/single weave/split laced - tinned bronzePart Cable Dia. Range Maximum Load* Eye Length Nom. Mesh LengthNumber inches • cm lbs • kg inches • mm inches • mm


Single eye/single weave/split rod - tinned bronzePart Cable Dia. Range Maximum Load* Eye Length Nom. Mesh LengthNumber inches • cm lbs • kg inches • mm inches • mm

022-03-061 .37 to .49 • .94 to 1.24 106 • 48 4.0 • 102 5.0 • 127022-03-013 .50 to .62 • 1.27 to 1.57 106 • 48 7.0 • 178 10.0 • 254022-03-014 .63 to .74 • 1.60 to 1.88 158 • 72 8.0 • 203 10.0 • 254022-03-015 .75 to .99 • 1.91 to 2.51 204 • 93 8.0 • 203 13.0 • 330022-03-017 1.00 to 1.24 • 2.54 to 3.15 322 • 146 9.0 • 229 14.0 • 356022-03-018 1.25 to 1.49 • 3.18 to 3.78 322 • 146 10.0 • 254 15.0 • 381022-03-019 1.50 to 1.74 • 3.81 to 4.42 322 • 146 12.0 • 305 17.0 • 432022-03-020 1.75 to 1.99 • 4.45 to 5.05 430 • 195 14.0 • 356 19.0 • 483

Universal bale/single weave/split rod - tinned bronzePart Cable Dia. Range Maximum Load* Eye Length Nom. Mesh LengthNumber inches • cm lbs • kg inches • mm inches • mm

022-03-066 .75 to .99 • 1.91 to 2.51 204 • 93 up to 16 • 400 10.5 • 267022-03-068 1.00 to 1.24 • 2.54 to 3.15 322 • 146 up to 16 • 400 12.5 • 317022-03-069 1.25 to 1.49 • 3.18 to 3.78 322 • 146 up to 16 • 400 14.5 • 368022-03-070 1.50 to 1.74 • 3.81 to 4.42 322 • 146 up to 16 • 400 15.5 • 394022-03-071 1.75 to 1.99 • 4.45 to 5.05 430 • 195 up to 16 • 400 16.5 • 419

*Maximum Load is based on minimum breaking strength with a 4:1 safety factor.

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

80

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Double eye/single weave/split laced- tinned bronzePart Cable Dia. Range Maximum Load* Eye Length Nom. Mesh LengthNumber inches • cm lbs • kg inches • mm inches • mm

022-02-002 .63 to .74 • 1.60 to 1.88 170 • 77 4.0 • 102 10.0 • 254022-02-003 .75 to .99 • 1.91 to 2.51 204 • 93 5.5 • 140 13.0 • 330022-02-005 1.00 to 1.24 • 2.54 to 3.15 322 • 146 5.0 • 127 14.0 • 356022-02-006 1.25 to 1.49 • 3.18 to 3.78 322 • 146 5.0 • 127 15.0 • 381022-02-007 1.50 to 1.74 • 3.81 to 4.42 322 • 146 5.0 • 127 17.0 • 432

Double eye/single weave/split rod - tinned bronzePart Cable Dia. Range Maximum Load* Eye Length Nom. Mesh LengthNumber inches • cm lbs • kg inches • mm inches • mm


Double eye/single weave/closed mesh - tinned bronzePart Cable Dia. Range Maximum Load* Eye Length Nom. Mesh LengthNumber inches • cm lbs • kg inches • mm inches • mm



Mesh GripsTinned bronze for jute center traveling cables - with maximum hanging lengths of 200 ft • 61 m

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

81

Double eye/double weave/split laced - stainless steelPart Cable Dia. Range Maximum Load* Eye Length Nom. Mesh LengthNumber inches • cm lbs • kg inches • mm inches • mm

024-20-1284 .75 to .99 • 1.91 to 2.51 620 • 282 4.0 • 102 13.0 • 330024-20-1285 1.00 to 1.24 • 2.54 to 3.15 800 • 364 4.0 • 102 14.0 • 356 024-20-1286 1.25 to 1.49 • 3.18 to 3.78 800 • 364 4.0 • 102 15.0 • 381 024-20-1287 1.50 to 1.74 • 3.81 to 4.42 800 • 364 4.0 • 102 17.0 • 432 024-20-1500 1.75 to 2.00 • 4.45 to 5.08 1800 • 818 12.0 • 305 19.0 • 483

Double eye/single weave/split rod - stainless steelPart Cable Dia. Range Maximum Load* Eye Length Nom. Mesh LengthNumber inches • cm lbs • kg inches • mm inches • mm

024-03-005 1.00 to 1.24 • 2.54 to 3.15 530 • 241 5.0 • 127 12.5 • 317024-03-006 1.25 to 1.49 • 3.18 to 3.78 900 • 409 5.0 • 127 14.5 • 368024-03-007 1.50 to 1.74 • 3.81 to 4.42 900 • 409 5.0 • 127 15.5 • 394024-03-008 1.75 to 2.00 • 4.45 to 5.08 1200 • 545 6.0 • 152 16.5 • 419

Double eye/double weave/closed mesh - stainless steelPart Cable Dia. Range Maximum Load* Eye Length Nom. Mesh LengthNumber inches • cm lbs • kg inches • mm inches • mm

024-20-1504 1.00 to 1.24 • 2.54 to 3.15 1200 • 545 12.0 • 305 14.0 • 356024-20-1470 1.25 to 1.49 • 3.18 to 3.78 1640 • 745 12.0 • 305 15.0 • 381024-20-1510 1.50 to 1.74 • 3.81 to 4.42 1660 • 755 12.0 • 305 17.0 • 432024-20-1499 1.75 to 1.99 • 4.45 to 5.05 1800 • 818 12.0 • 305 19.0 • 483024-20-1542 2.00 to 2.50 • 5.08 to 6.35 1800 • 818 12.0 • 305 21.0 • 533


Mesh GripsStainless steel for traveling cables - with maximum hanging lengths of 200 ft • 61 m

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

82

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Single eye/Single weave/split rod - stainless steelPart Cable Dia. Range Maximum Load* Eye Length Nom. Mesh LengthNumber inches • cm lbs • kg inches • mm inches • mm

024-03-014 .63 to .74 • 1.60 to 1.88 410 • 186 8.0 • 203 8.5 • 216024-03-015 .75 to .99 • 1.91 to 2.51 410 • 186 8.0 • 203 10.5 • 267024-03-017 1.00 to 1.24 • 2.54 to 3.15 530 • 240 9.0 • 229 12.5 • 317024-03-018 1.25 to 1.49 • 3.18 to 3.78 900 • 408 10.0 • 254 14.5 • 368024-03-019 1.50 to 1.74 • 3.81 to 4.42 900 • 408 12.0 • 305 15.5 • 394

Universal bale/single weave/split rod - stainless steelPart Cable Dia. Range Maximum Load* Eye Length Nom. Mesh LengthNumber inches • cm lbs • kg inches • mm inches • mm

024-03-066 .75 to .99 • 1.91 to 2.51 336 • 153 up to 16 • 400 10.5 • 267024-03-068 1.00 to 1.24 • 2.54 to 3.15 530 • 241 up to 16 • 400 12.5 • 317024-03-069 1.25 to 1.49 • 3.18 to 3.78 530 • 241 up to 16 • 400 14.5 • 368024-03-070 1.50 to 1.74 • 3.81 to 4.42 530 • 241 up to 16 • 400 15.5 • 394


Mesh GripsStainless steel for traveling cables - with maximum hanging lengths of 200 ft • 61 m

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

83

Power/signal onlyPart Product Number/Size* Max. Hang Length Cable Nom. Dim. H x W Cable Net WeightNumber Code of Conductors feet • meters inches • mm lbs/kft • kg/km

18-020-07 P 20-18 20 / 18 AWG • 0.75 mm2 150 • 46 .19 x 2.3 • 4.8 x 58.4 296 • 44018-024-07 P 24-18 24 / 18 AWG • 0.75 mm2 150 • 46 .19 x 2.7 • 4.8 x 68.6 367 • 54618-618-07 PC 18 6 / 14 AWG • 2.0 mm2 150 • 46 .23 x 2.19 • 5.8 x 55.6 401 • 597 12 / 18 AWG • 0.75 mm2


Power/signal and shielded pairs Part Product Number/Size* Max. Hang Length Cable Nom. Dim. H x W Cable Net WeightNumber Code of Conductors feet • meters inches • mm lbs/kft • kg/km

18-318-07 PC 18 LO 2 / 14 AWG • 2.0 mm2 150 • 46 .29 x 2.0 • 7.4 x 50.8 424 • 631 12 / 18 AWG • 0.75 mm2

2 sh. pair / 20 AWG • 0.5 mm2

NOTE: 18 AWG • 0.75 mm2 conductors 1 - 10 are yellow; 11 - 12 are orange18-418-07 PC 18 HI 2 / 14 AWG • 2.0 mm2 150 • 46 .29 x 2.0 • 7.4 x 50.8 424 • 631 12 / 18 AWG • 0.75 mm2

2 sh. pair / 20 AWG • 0.5 mm2

NOTE: 18 AWG • 0.75 mm2 conductors 13 - 20 are orange; 21 - 24 are tan18-426-07 PC 26 18 / 18 AWG • 0.75 mm2 150 • 46 .25 x 2.74 • 6.4 x 69.6 525 • 781 4 sh. pair / 20 AWG • 0.5 mm2

18-X26-07 PC 26-6 4 / 14 AWG • 2.0 mm2 150 • 46 .23 x 2.19 • 5.8 x 55.6 626 • 932 10 / 18 AWG • 0.75 mm2

6 sh. pair / 20 AWG • 0.5 mm2


Shielded pairs and coaxPart Product Number/Size* Max. Hang Length Cable Nom. Dim. H x W Cable Net WeightNumber Code of Conductors feet • meters inches • mm lbs/kft • kg/km

18-C17-07 PCX 17 8 sh. pair / 20 AWG • 0.5 mm2 150 • 46 .44 x 2.2 • 11.2 x 55.9 497 • 740 1 coax / RG6/U

Parallel construction flat traveling cable is recommended for speeds up to 1000 ft/min • 5 m/sec.Most versions of our flat traveling cables can be manufactured with steel support cables for longer hang lengths. Callfor details. RG6/U is the standard coaxial cable used in flat cables and is good for CCTV applications.75 ohm, UL listed, CSA certified. Center conductor is 20 AWG • 0.5 mm2 soft drawn stranded copper insulated withcellular polyethylene, wrapped with aluminum tape, braided with tinned copper and jacketed with flame-retardant PVC.Attenuation: 0.65 dB/100 ft. • 2.13 dB/100 m @ 10 MHz 1.55 dB/100 ft. • 5.08 dB/100 m @ 50 MHzCapacitance: 17.3 pf/ft • 56.7 pf/m*NOTE: Metric equivalents for AWG sizes are approximate on these cables.

Flat Traveling Cable Type ETP/300VUnsupported - UL listed, CSA certified, NEC/CEC compliant

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

84

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Flat Cable Suspension Devices for unsupported flat cables Nylon/plastic construction

FCSD-2 - for cables up to 2 in. • 52 mm wide

Part Drawing Dimensions Number Reference inches • mm

FCSD-2 A 3.94 • 100 B 2.36 • 60 C 1.65 • 42 D 2.05 • 52 E 0.47 • 12 F 1.69 • 43 G 1.22 • 31 H 1.18 • 30

Mounting holes are .20 in. • 5 mm with .55 in. • 14 mm counterbore

The FCSD-2 is made of a durable nylon/plastic. It consists of abracket (dimensions listed above) that attaches to the hoistway wallor the car, and a clamping wedge that secures the cable in thebracket.

The FCSD-2 is designed to hold up to two cables totaling a maximumthickness of 0.47 in. • 12 mm and maximum width of 1.65 in. • 42mm. If multiple cables are being supported, the narrowest widthcable must not be less than 70% of the width of the widest cable.

Order two devices per cable, one for the car and one for the hoistway.

FCSD-2DIMENSION REFERENCE

FCSD-3DIMENSION REFERENCE

FCSD-3 - for cables up to 3 in. • 76 mm wide

Part Drawing Dimensions Number Reference inches • mm

FCSD-3 A 4.72 • 120 B 3.43 • 87 C 2.05 • 52 D 3.00 • 76 E 1.06 • 27 F 2.87 • 73 G 1.57 • 40 H 0.93 • 23.5

Mounting holes are .25 in. • 6.35 mm with .55 in. • 14 mm counterbore

The FCSD-3 is made of a durable nylon/plastic. It consists of a bracket(dimensions listed above) that attaches to the hoistway wall or the car,and a clamping wedge that secures the cable in the bracket.

The FCSD-3 is designed to hold up to three cables totaling a maximumthickness of 0.59 in. • 15 mm and maximum width of 3 in. • 76 mm. Ifmultiple cables are being supported, the narrowest width cable mustnot be less than 70% of the width of the widest cable.


954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

85

Flat Cable Suspension Devicesfor steel-supported flat traveling cables

FCSD-4 and FCSD-4DPart Drawing Dimensions Number Reference inches • mm

FCSD-4 A 5.75 • 146 B 6.25 • 159 C 1.50 • 38 D 4.00 • 102 E 0.38 • 9.5 F 5.00 • 127 G 5.25 • 133 H 0.50 • 13 I 0.91 • 23 J 0.55 • 14

A 5.75 • 146 B 6.25 • 159 C 1.90 • 48 D 4.00 • 102 E 0.38 • 9.5 F 5.00 • 127 G 5.25 • 133 H 0.50 • 13 I 1.34 • 34 J 0.96 • 24

Mounting holes are 1/4 in. • 7 mm

The FCSD-4 series is formed of sheet steel with an aluminum clampingwedge. The bracket (dimensions listed above) attaches to the hoistway wall orthe car, and the clamping wedge secures the cable in the bracket.

The FCSD-4 is designed to hold up to three cables totaling a maximumthickness of 14 mm and a maximum width of 4 in. • 101 mm. Maximum load is500 lbs • 227 kg. If multiple cables are being supported, the narrowest widthcable must not be less than 70% of the width of the widest cable.

The FCSD-4D is designed to hold up to five cables totaling a maximumthickness of 0.96 in. • 24.4 mm and a maximum width of 4 in. • 101 mm.Maximum load is 500 lbs • 227 kg. If multiple cables are being supported, thenarrowest width cable must not be less than 70% of the width of the widestcable.


FCSD-4/4D DIMENSION REFERENCE

FCSD-SPart Drawing Dimensions Number Reference inches • mm

FCSD-S A 7.50 • 191 B 6.00 • 152 C 6.00 • 152 D 4.00 • 102 E 1.00 • 25 F 0.50 • 13 G 4.17 • 106

The FCSD-S is formed of sheet steel. It attaches to thehoistway wall or the car. The steel support cable is carried bythe four 3/8 in. • 9.5 mm carbon-steel support studs, and heldin place by the front bracket.

The FCSD-S is designed to hold up to three cables totaling amaximum thickness of 5/8 in. • 16 mm. Maximum supportedweight is 1500 lbs • 681 kg.

Order two devices per cable group, one for the car and one forthe hoistway.

A

B

CG

FCSD-SDIMENSION REFERENCE

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

86

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Super-Duct® Hoistway Cable/600VJacketed and unjacketed - UL listed, CSA certified, NEC/CEC compliant

Power/signal onlyPart Product Number/Size* Cable Nom. OD Cable Net WeightNumber Code of Conductors inches • mm lbs/kft • kg/km

18-003-41 WOJ 3-14 3 / 14 AWG • 2.0 mm2 0.31 • 7.9 59 • 8818-604-47 WOJ 4-14 4 / 14 AWG • 2.0 mm2 0.35 • 9.0 79 • 118 NOTE: special insulation colors - red, white, black and green 18-005-47 WOJ 5-14 5 / 14 AWG • 2.0 mm2 0.40 • 10.2 102 • 152 NOTE: special insulation colors - one black, four grey and special print numbers18-007-45 D 7-14 7 / 14 AWG • 2.0 mm2 0.46 • 11.7 151 • 225 NOTE: conductors are solid, not stranded, copper18-008-47 WOJ 8-14 SP † † 8 / 14 AWG • 2.0 mm2 0.50 • 12.7 158 • 235 NOTE: conductors colors are #1 / green, #2 to 4 / white, #5 to 8 / black18-218-47 WOJ 2X18TW 600V SP † † 2 unsh. pair / 18 AWG • 0.75 mm2 0.36 • 9.2 41 • 6118-014-41 WOJ 14-14 14 / 14 AWG • 2.0 mm2 0.63 • 16.0 276 • 41118-404-41 WOJ 4-18 4 / 18 AWG • 0.75 mm2 0.27 • 6.9 41 • 6118-404-47 WOJ 4-18 SP † † 4 / 18 AWG • 0.75 mm2 0.27 • 6.9 41 • 61 NOTE: conductors colors are #1 / yellow, #2 / orange, #3 / blue, #4 / red18-407-41 WOJ 7-18 7 / 18 AWG • 0.75 mm2 0.34 • 8.6 72 • 10718-408-48† WOJ 8-18 8 / 18 AWG • 0.75 mm2 0.35 • 8.9 80 • 11918-410-41 WOJ 10-18 10 / 18 AWG • 0.75 mm2 0.43 • 10.9 103 • 15318-412-41 WOJ 12-18 12 / 18 AWG • 0.75 mm2 0.46 • 11.7 119 • 17718-414-41 WOJ 14-18 14 / 18 AWG • 0.75 mm2 0.49 • 12.4 144 • 21418-416-41 WOJ 16-18 16 / 18 AWG • 0.75 mm2 0.53 • 13.5 165 • 24618-419-41 WOJ 19-18 19 / 18 AWG • 0.75 mm2 0.56 • 14.2 195 • 29018-424-41 WOJ 24-18 24 / 18 AWG • 0.75 mm2 0.66 • 16.8 234 • 34918-430-41 WOJ 30-18 30 / 18 AWG • 0.75 mm2 0.72 • 18.3 307 • 45718-437-41 WOJ 37-18 37 / 18 AWG • 0.75 mm2 0.78 • 19.8 380 • 56618-437-47 WOJ 37-18 SP † † 37 / 18 AWG • 0.75 mm2 0.78 • 19.8 380 • 566 NOTE: conductors are numbered 38 to 7418-442-41 WOJ 42-18 42 / 18 AWG • 0.75 mm2 0.84 • 21.3 432 • 64318-461-41 WOJ 61-18 61 / 18 AWG • 0.75 mm2 0.98 • 24.9 625 • 930

NOTE: 90° C-rated conductors are available upon request.†18-408-48 is available with 90° C-rated conductors only.*NOTE: Metric equivalents for AWG sizes are approximate on these cables.

Jacketed with power/signal only/600VPart Product Number/Size* Cable Nom. OD Cable Net WeightNumber Code of Conductors inches • mm lbs/kft • kg/km

18-404-43† D4-18 4 / 18 AWG • 0.75 mm2 .33 • 8.4 58 • 86 18-407-43 D7-18 7 / 18 AWG • 0.75 mm2 .40 • 10.2 91 • 135 †Conductor colors are non-standard: #1/black - #2/white - #3/green - #4/red.NOTE: 90° C-rated conductors are available upon request.*NOTE: Metric equivalents for AWG sizes are approximate on these cables.††“SP” Denotes special color coding and/or conductor numbering

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

87

Super-Duct® Hoistway CableUnjacketed - UL listed, CSA certified, NEC/CEC compliant

Unjacketed with power/signal only/300VPart Product Number/Size* Cable Nom. OD Cable Net WeightNumber Code of Conductors inches • mm lbs/kft • kg/km

18-704-41 WOJ 4-18 300V 4 / 18 AWG • 0.75 mm2 0.25 • 6.4 36 • 5418-705-41 WOJ 5-18 300V 5 / 18 AWG • 0.75 mm2 0.31 • 7.9 46 • 6818-707-41 WOJ 7-18 300V 7 / 18 AWG • 0.75 mm2 0.34 • 8.6 64 • 95 18-710-41 WOJ 10-18 300V 10 / 18 AWG • 0.75 mm2 0.40 • 10.2 91 • 135 18-714-41 WOJ 14-18 300V 14 / 18 AWG • 0.75 mm2 0.46 • 11.7 128 • 190 18-716-41 WOJ 16-18 300V 16 / 18 AWG • 0.75 mm2 0.52 • 13.2 146 • 21718-719-41 WOJ 19-18 300V 19 / 18 AWG • 0.75 mm2 0.52 • 13.2 173 • 25718-730-41 WOJ 30-18 300V 30 / 18 AWG • 0.75 mm2 0.67 • 17.0 276 • 41118-737-41 WOJ 37-18 300V 37 / 18 AWG • 0.75 mm2 0.73 • 18.5 345 • 513 18-761-41 WOJ 61-18 300V 61 / 18 AWG • 0.75 mm2 0.93 • 23.6 564 • 83918-102-47 WOJ 1-18 O/GY 300V 1 unsh. pair / 18 AWG • 0.75 mm2 0.19 • 4.9 18 • 2718-202-47 WOJ 1-18 R/BK 300V 1 unsh. pair / 18 AWG • 0.75 mm2 0.19 • 4.9 18 • 27 18-104-47 WOJ 2-18 DUCT SP 300V † † 2 unsh. pairs / 18 AWG • 0.75 mm2 0.33 • 8.3 37 • 56

NOTE: 90° C-rated conductors are available upon request.*NOTE: Metric equivalents for AWG sizes are approximate on these cables.

Unjacketed/300V and 600VPower and signal/shielded pair combinations Part Product Number/Size* Cable Nom. OD Cable Net Weight Rated VoltageNumber Code of Conductors inches • mm lbs/kft • kg/km

18-311-42 CWOJ 14 SP † † 3 / 14 AWG • 2.0 mm2 0.53 • 13.5 160 • 238 300V 11 / 18 AWG • 0.75 mm2 NOTE: 14 AWG • 2.0 mm2 conductor colors are #12/black - #13/white - #14/green.18-305-56 3-14+1X18 600V 3 / 14 AWG • 2.0 mm2 0.49 • 12.4 80 • 120 600V 1 unsh. pair / 18 AWG • 0.75 mm2

18-449-42 CWOJ 30 SP † † 13 / 14 AWG • 2.0 mm2 0.98 • 24.9 530 • 789 600V 17 / 18 AWG • 0.75 mm2 18-032-47 CWOJ 32 SP † † 6 / 14 AWG • 2.0 mm2 0.85 • 21.6 401 • 597 600V 16 / 18 AWG • 0.75 mm2 1 sh. pair / 20 AWG • 0.5 mm2 1 unsh. pair / 20 AWG • 0.5 mm2

3 unsh. pair / 18 AWG • 0.75 mm2

18-130-42 CWOJ 49 4 / 14 AWG • 2.0 mm2 0.98 • 24.9 530 • 789 600V 45 /18 AWG • 0.75 mm2 18-57X-42 CWOJ 57 4 / 14 AWG • 2.0 mm2 1.22 • 31.0 652 • 970 600V 40 / 18 AWG • 0.75 mm2

6 sh. pair / 20 AWG • 0.5 mm2 1 coax / RG6/U 18-661-42 CWOJ 71 6 / 14 AWG • 2.0 mm2 1.18 • 30.0 816 • 1214 600V 61 / 18 AWG • 0.75 mm2 2 sh. pair / 20 AWG • 0.5 mm2

NOTE: 90° C-rated conductors are available upon request.*NOTE: Metric equivalents for AWG sizes are approximate on these cables.††“SP” Denotes special color coding and/or conductor numbering

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

88

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Stationary Cable for audio and data communications/300VUL listed, CSA certified, NEC/CEC compliant

Shielded pairs onlyPart Number/Size* Shielded Pair Shield Type Drain Wire Nominal OD Net WeightNumber of Conductors Colors and Coverage inches • mm lbs/kft • kg/km

18-801-43 1 sh. pair / 20 AWG • 0.5 mm2 red/white Copper braid 85% - 0.22 • 5.5 29 • 43M13142 2 sh. pair / 20 AWG • 0.5 mm2 black/red, green/white Foil 100% 22 AWG 0.23 • 5.8 34 • 51M13143 3 sh. pair / 20 AWG • 0.5 mm2 see below Foil 100% 22 AWG 0.30 • 7.6 52 • 77M13144 4 sh. pair / 20 AWG • 0.5 mm2 see below Foil 100% 22 AWG 0.32 • 8.1 64 • 95M13146 6 sh. pair / 20 AWG • 0.5 mm2 see below Foil 100% 22 AWG 0.38 • 9.7 87 • 130M13149 9 sh. pair / 20 AWG • 0.5 mm2 see below Foil 100% 22 AWG 0.45 • 11.4 132 • 196M13152 12 sh. pair / 20 AWG • 0.5 mm2 see below Foil 100% 22 AWG 0.50 • 12.7 169 • 251M13155 15 sh. pair / 20 AWG • 0.5 mm2 see below Foil 100% 22 AWG 0.60 • 15.2 225 • 335

*NOTE: Metric equivalents for AWG sizes are approximate on these cables. pair #1 - black/red pair #2 - black/white pair #3 - black/green pair #4 - black/blue pair #5 - black/yellow pair #6 - black/brown pair #7 - black/orange pair #8 - red/white pair #9 - red/green pair #10 - red/blue pair #11 - red/yellow pair #12 - red/brown pair #13 - red/orange pair #14 - green/white pair #15 - green/blue

Door Lock Wire SF-2 single conductor/600V - 200° C ratedUL listed, CSA certified, NEC/CEC compliantNYC code compliant / complies with ANSI/ASTM B174 and B3 as requiredPart Product Description/Size* Nominal OD Net Weight Put-ups JacketNumber Code of Single Conductor inches • mm lbs/kft • kg/km Color

16ASF2BLAT 16 AWG SF-2 7 / .019 tinned copper 0.14 • 3.6 15 • 22.3 cut to length Black 16 AWG • 1.3 mm2

16ASF2RDAT 16 AWG SF-2 as above 0.14 • 3.6 15 • 22.3 cut to length Red16ASF2WR500 16 AWG SF-2 as above 0.14 • 3.6 15 • 22.3 500 ft. White/Red16ASF2WRAT 16 AWG SF-2 as above 0.14 • 3.6 15 • 22.3 cut to length White/Red18ASF2RD1000 18 AWG SF-2 7 / .015 tinned copper 0.13 • 3.3 12 • 17.9 1000 ft. Red 18 AWG • 0.75 mm2

18ASF2RD500 18 AWG SF-2 as above 0.13 • 3.3 12 • 17.9 500 ft. Red18ASF2RDAT 18 AWG SF-2 as above 0.13 • 3.3 12 • 17.9 cut to length Red18ASF2WR1000 18 AWG SF-2 7 / .015 tinned copper 0.13 • 3.3 12 • 17.9 1000 ft. White/Red 18 AWG • 0.75 mm2

18ASF2WR500 18 AWG SF-2 as above 0.13 • 3.3 12 • 17.9 500 ft. White/Red18ASF2WRAT 18 AWG SF-2 as above 0.13 • 3.3 12 • 17.9 cut to length White/Red18SSF2RDAT 18 AWG SF-2 Solid tinned copper 0.12 • 3.0 12 • 17.9 cut to length Red 18 AWG • 0.75 mm2


954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

89

Hook-up wire UL listed, CSA certified, NEC/CEC compliant

THHN-type single conductor/600V - 90°C rated*

Part Product Description/Size* Nominal OD Net Weight Insulation Thickness JacketNumber Code of Single Conductor inches • mm lbs/kft • kg/km inches • mm Color

4/0ATHHNBL 4/0 THHN 19 strand copper .64 • 16.2 711 • 1058 .05 • 1.3 Black 4/0 AWG • 108 mm2

3/0ATHHNBL 3/0 THHN 19 strand copper .58 • 14.7 570 • 848 .05 • 1.3 Black 3/0 AWG • 84.9 mm2



1ATHHNBL 1 AWG THHN 19 strand copper .44 • 11.2 297 • 442 .05 • 1.3 Black 1 AWG • 42.5 mm2



6ATHHNBL 6 AWG THHN† 19 strand copper .25 • 6.4 94 • 140 .03 • 0.8 Black 6 AWG • 13.3 mm2

6ATHHNGN 6 AWG THHN† as above .25 • 6.4 94 • 140 .03 • 0.8 Green8ATHHNBL 8 AWG THHN† 19 strand copper .22 • 5.5 62 • 92 .03 • 0.8 Black 8 AWG • 8.3 mm2



12ATHHNGN 12 AWG THHN† as above .13 • 3.3 24 • 36 .02 • 0.5 Green†6ATHHN, 8ATHHN, 10ATHHN and 12ATHHN are suitable for 105° C appliance wiring material (AWM). All cables are cut to length. Please specify.*NOTE: Metric equivalents for AWG sizes are approximate on these cables.

THHN (or MTW or THWN-2) conductors are suitable for operations at 600 volts as specified in the National Electrical Code, at conductor temperatures not to exceed 75° C when exposed to oil or coolant, 90° C in wet or dry locations.

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

90

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N


TEW-type single conductor/600V - 105° C ratedPart Product Description/Size* Nominal OD Net Weight Put-ups JacketNumber Code of Single Conductor inches • mm lbs/kft • kg/km Colors

14ATEWBU500 14 AWG TEW 19 / .0147 strand copper 0.13 • 3.3 19 • 28.1 500 ft. Blue 14 AWG • 2.0 mm2 14ATEWBLAT 14 AWG TEW as above 0.13 • 3.3 19 • 28.1 2500 ft. Black14ATEWBL500 14 AWG TEW as above 0.13 • 3.3 19 • 28.1 500 ft. Black14ATEWBUAT 14 AWG TEW as above 0.13 • 3.3 19 • 28.1 2500 ft. Blue14ATEWGN500 14 AWG TEW as above 0.13 • 3.3 19 • 28.1 500 ft. Green14ATEWGNAT 14 AWG TEW as above 0.13 • 3.3 19 • 28.1 2500 ft. Green14ATEWRD500 14 AWG TEW as above 0.13 • 3.3 19 • 28.1 500 ft. Red14ATEWRDAT 14 AWG TEW as above 0.13 • 3.3 19 • 28.1 2500 ft. Red14ATEWWH500 14 AWG TEW as above 0.13 • 3.3 19 • 28.1 500 ft. White16ATEWBL500 16 AWG TEW 26 / .010 strand copper 0.12 • 3.0 15 • 22.2 500 ft. Black 16 AWG • 1.3 mm2

16ATEWBU500 16 AWG TEW as above 0.12 • 3.0 15 • 22.2 500 ft. Blue16ATEWBUAT 16 AWG TEW as above 0.12 • 3.0 15 • 22.2 5000 ft. Blue16ATEWOR500 16 AWG TEW as above 0.12 • 3.0 15 • 22.2 500 ft. Orange16ATEWORAT 16 AWG TEW as above 0.12 • 3.0 15 • 22.2 5000 ft. Orange16ATEWYW500 16 AWG TEW as above 0.12 • 3.0 15 • 22.2 500 ft. Yellow16ATEWYWAT 16 AWG TEW as above 0.12 • 3.0 15 • 22.2 5000 ft. Yellow18ATEWBL500 18 AWG TEW 16 / .010 strand copper 0.11 • 2.8 11 • 16.3 500 ft. Black 18 AWG • 0.75 mm2 18ATEWBLAT 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 5000 ft. Black18ATEWBR500 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 500 ft. Brown18ATEWBRAT 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 5000 ft. Brown18ATEWBU500 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 500 ft. Blue18ATEWBUAT 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 5000 ft. Blue18ATEWGN500 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 500 ft. Green18ATEWGNAT 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 5000 ft. Green18ATEWGY500 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 500 ft. Grey18ATEWGYAT 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 5000 ft. Grey18ATEWMR500 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 500 ft. Maroon

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

91

TEW-type single conductor/600V - 105° C ratedPart Product Description/Size* Nominal OD Net Weight Put-ups JacketNumber Code of Single Conductor inches • mm lbs/kft • kg/km Colors

18ATEWMRAT 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 5000 ft. Maroon18ATEWOR500 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 500 ft. Orange18ATEWORAT 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 5000 ft. Orange18ATEWPK500 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 500 ft. Pink18ATEWPKAT 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 5000 ft. Pink18ATEWPU500 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 500 ft. Purple18ATEWPUAT 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 5000 ft. Purple18ATEWRD500 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 500 ft. Red18ATEWRDAT 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 5000 ft. Red18ATEWTN500 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 500 ft. Tan18ATEWWH500 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 500 ft. White18ATEWWHAT 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 5000 ft. White18ATEWYW500 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 500 ft. Yellow18ATEWYWAT 18 AWG TEW as above 0.11 • 2.8 11 • 16.3 5000 ft. Yellow20ATEWBL 20 AWG TEW 10 / .030 strand copper 0.10 • 2.5 8 • 3.6 1000 ft. Black 20 AWG • 0.5 mm2 20ATEWRD 20 AWG TEW as above 0.10 • 2.5 8 • 3.6 1000 ft. Red20ATEWWH 20 AWG TEW as above 0.10 • 2.5 8 • 3.6 1000 ft. White



800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

92

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Power and Specialty Wire and Cable UL listed, CSA certified, NEC/CEC compliant

SOOW-type four conductor portable cord/600V - 90°C ratedPart Product Description/Size Nominal OD Net Weight Put-ups Jacket Number Code of Conductors inches • mm lbs/kft • kg/km Colors

6/4 SOOW 6 AWG SOOW 133 / .0142 strand copper 1.06 • 26.9 856 • 388 250 ft. Blue8/4 SOOW 8 AWG SOOW 65 / .0159 strand copper 0.93 • 23.6 605 • 274 250 ft. Blue10/4 SOOW 10 AWG SOOW 104 / .010 strand copper 0.70 • 17.8 357 • 162 250 ft. Blue

Other gauge sizes and conductor counts are available with short lead times.

Control and signal or power cable for hoistway and machine roomPart Description SuggestedNumber Use

TR-64 7 / 18 AWG stranded copper • PVC insulation • unjacketed • 300V, 90° C Control and signal

Data communications cable for hoistway and machine roomPart Description SuggestedNumber Use

5508 Cat 5e UTP / 24 AWG stranded tin copper • unshielded • grey PVC jacket • 75° C Data communications NOTE: Sold on 1000 ft. reels 1PR#18SHDJK 1 shielded twisted pair / 18 AWG stranded copper • PVC jacket • 600V, 60° C Control and signalW#UL-2464 2 shielded twisted pairs / 18 AWG stranded copper • PVC jacket • individual foil shield • 300V, 80° C Control and signal9369 3 shielded twisted pairs / 18 AWG stranded copper • PVC jacket • individual foil shield • 300V, 105° C Instrumentation NOTE: Sold on 1000 ft. reels 9830 3 pairs / 24 AWG stranded tin/copper • PVC insulation • foil and braid shields • PVC jacket • 300V, 80°C Data communications NOTE: Sold on 1000 ft. reels9475 RG6/U coax with a stranded copper conductor • PVC jacket Video, CCTV3105A 1 pair / 22 AWG stranded tin copper • overall foil shield• PVC jacket • 300V, 60° C Data communications

Coax cable for hoistway and machine roomPart Description SuggestedNumber Use

9259 RG59/U coax with a stranded copper conductor • PVC jacket Video, CCTV9244 RG59/U coax with a solid copper conductor • PVC jacket Video, CCTV

Instrumentation cable for hoistway and machine roomPart Description SuggestedNumber Use

9512 2 pr / 22 AWG stranded tin/copper • PVC insulation • overall foil shield • PVC jacket • 300V, 105° C Instrumentation9514 4 pr / 22 AWG stranded tin/copper • PVC insulation • overall foil shield • PVC jacket • 300V, 105° C Instrumentation

Power cable for hoistway and machine roomPart Description SuggestedNumber Use

1PR#18ATEW-TW 1 twisted pair / 18 AWG stranded copper • unjacketed • orange/black • 600V, 105° C Power1PR#12TW 1 twisted pair / 12 AWG stranded copper unjacketed • red/black • 600V, 105° C Power

ConnectorsPart Description*Number

730-103 Female socket, 3-pole, IDC connection, live conductor automatically cut, 18 to 16 AWG • 0.75 to 1.5 mm2

730-106 Female socket, 6-pole, IDC connection, 18 to 16 AWG • 0.75 to 1.5 mm2

730-113 Wire-tap branch male connector, 3-pole, 28 to 14 AWG • 0.08 to 2.08 mm2

730-116 Wire-tap branch male connector, 6-pole, 28 to 14 AWG • 0.08 to 2.08 mm2

730-123 Wire-tap branch female connector, 3-pole, 18 to 16 AWG • 0.75 to 1.5 mm2

730-126 Wire-tap branch female connector, 6-pole, 18 to 16 AWG • 0.75 to 1.5 mm2

222-413 Lever nuts, 3-pole Cage Clamp connection, 28 to 14 AWG • 0.08 to 2.08 mm2

222-415 Lever nuts, 5-pole Cage Clamp connection, 28 to 14 AWG • 0.08 to 2.08 mm2

231-1xx/026-000† Female connector, 2 to 24-pole, with integrated fixing flanges, for wire sizes 28 to 12 AWG • 0.08 to 3.3 mm2, pin spacing 0.197 in • 5 mm

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

93

Rails, Ferrules and Connectors by WAGO / with CAGE CLAMP® connectionsUL listed, CSA certified

Carrier railsPart DescriptionNumber

210-113 DIN 35 rail, steel/unslotted, 6.6 ft • 2 meters long210-112 DIN 35 rail, steel/slotted, 6.6 ft • 2 meters long210-111 DIN 15 rail, steel/slotted, 6.6 ft • 2 meters long249-116 Screwless end stop for carrier rail

FerrulesPart DescriptionNumber

Ask for Insulated ferrules, 0.25 mm2 to 16 mm2

specific sizes

Ask for Uninsulated ferrules, 0.25 mm2 to 16 mm2

specific sizes

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

94

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Connectors by WAGO/with CAGE CLAMP® connectionsUL listed, CSA certified


231-2xx/026-000 Female connector, 2 to 24-pole, with integrated fixing flanges, for wire sizes 28 to 12 AWG • 0.08 to 3.3 mm2, pin spacing .295 in. • 7.5 mm

231-3xx/026-000 Female connector, 2 to 24-pole, with integrated fixing flanges, for wire sizes 28 to 12 AWG • 0.08 to 3.3 mm2, pin spacing 0.2 in. • 5.08 mm

231-7xx/026-000 Female connector, 2 to 24-pole, with integrated fixing flanges, for wire sizes 28 to 12 AWG • 0.08 to 3.3 mm2, pin spacing 0.3 in. • 7.62 mm

231-1xx/037-000 Female connector, 2 to 24-pole, w/ locking device, for wire sizes 28 to 12 AWG • 0.08 to 3.3 mm2, pin spacing .197 in. • 5 mm

231-2xx/037-000 Female connector, 2 to 24-pole, w/ locking device, for wire sizes 28 to 12 AWG • 0.08 to 3.3 mm2, pin spacing .295 in. • 7.5 mm

231-3xx/037-000 Female connector, 2 to 24-pole, w/ locking device, for wire sizes 28 to 12 AWG • 0.08 to 3.3 mm2, pin spacing 0.2 in. • 5.08 mm

231-7xx/037-000 Female connector, 2 to 24-pole, w/ locking device, for wire sizes 28 to 12 AWG • 0.08 to 3.3 mm2, pin spacing 0.3 in. • 7.62 mm

231-6xx Male connector, pin spacing 5 mm, Cage Clamp connection

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

95


721-1xx/008-000 Female connector, 2 to 24-pole, w/ snap-in mounting foot, for wire sizes 28 to 14 AWG • 0.08 to 2.1 mm2, pin spacing .197 in. • 5 mm, 100% protected against mismating

721-1xx/026-000 Female connector, 2 to 24-pole, w/ two latches, for wire sizes 28 to 14 AWG • 0.08 to 2.1 mm2, pin spacing .197 in. • 5 mm, 100% protected against mismating

721-1xx/037-000 Female connector, 2 to 24-pole, w/ locking lever, for wire sizes 28 to 14 AWG • 0.08 to 2.1 mm2, pin spacing .197 in. • 5 mm, 100% protected against mismating

733-1xx Female connector, 2 to 24-pole, for wire sizes 28 to 14 AWG • 0.08 to 2.1 mm2, pin spacing .197 mm • 2.5 mm, 100% protected against mismating, Cage Clamp connection

734-1xx Female connector, 2 to 24-pole, for wire sizes 28 to 14 AWG • 0.08 to 2.1 mm2, pin spacing .138 in. • 3.5 mm, 100% protected against mismating, Cage Clamp connection

734-2xx Female connector, 2 to 24-pole, for wire sizes 28 to 14 AWG • 0.08 to 2.1 mm2, pin spacing 0.15 in. • 3.8 mm, 100% protected against mismating, Cage Clamp connection

734-3xx LOW Male connector, 2 to 24-pole, for wire sizes 28 to 14 AWG • 0.08 to 2.1 mm2, pin spacing .138 in. • 3.5 mm, 100% protected against mismating, Cage Clamp connection

734-3xx HIGH Male connector, 2 to 24-pole, for wire sizes 28 to 14 AWG • 0.08 to 2.1 mm2, pin spacing .138 in. • 3.5 mm, 100% protected against mismating, Cage Clamp connection

Connectors by WAGO/with CAGE CLAMP® connectionsUL listed, CSA certified

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

96

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Die-cast compression connectors Part Trade StandardNumber Sizes Packaging*

08-001 1/2 5008-002 3/4 2508-003 1 2008-004 1-1/4 1008-005 1-1/2 1008-006 2 1008-007 2-1/2 12

Die-cast set screw connectors

Part Trade StandardNumber Sizes Packaging*

08-021 1/2 5008-022 3/4 2508-023 1 2508-024 1-1/4 1008-025 1-1/2 1008-026 2 1008-027 2-1/2 12

Die-cast compression couplingsPart Trade StandardNumber Sizes Packaging*

09-001 1/2 5009-002 3/4 2509-003 1 1009-004 1-1/4 1009-005 1-1/2 1009-006 2 1009-013 2-1/2 12

Die-cast set screw couplingsPart Trade StandardNumber Sizes Packaging*

09-027 1/2 5009-028 3/4 2509-029 1 2509-030 1-1/4 1009-031 1-1/2 1509-032 2 509-033 2-1/2 12

EMT FittingsUL listed, CSA certified

Steel compression connectors Part Trade StandardNumber Sizes Packaging*

69-004 1/2 2569-005 3/4 2569-006 1 2069-007 1-1/4 569-008 1-1/2 2069-009 2 10

Steel set screw connectors


69-010 1/2 5069-011 3/4 2569-012 1 2569-013 1-1/4 1069-014 1-1/2 1069-015 2 5

Steel compression couplingsPart Trade StandardNumber Sizes Packaging*

69-016 1/2 2569-017 3/4 2069-018 1 1069-019 1-1/4 569-020 1-1/2 569-021 2 2

Steel set screw couplingsPart Trade StandardNumber Sizes Packaging*

69-022 1/2 5069-023 3/4 2569-024 1 2069-025 1-1/4 1069-026 1-1/2 2069-027 2 20

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

97

EMT-to-flex compression couplings - malleable iron Part Trade StandardNumber Sizes Packaging*

69-049 1/2 EMT to 3/8 flex 2569-048 1/2 EMT to 1/2 flex 2069-050 3/4 EMT to 3/4 flex 1012-004 1 EMT to 1 flex 1012-006 1-1/4 EMT to 1-1/4 flex 512-007 1-1/2 EMT to 1-1/2 flex 512-005 2 EMT to 2 flex 2

EMT-to-flex squeeze couplings - set screw/die-castPart Trade StandardNumber Sizes Packaging*

12-001 1/2 EMT to 3/8 flex 5012-002 1/2 EMT to 1/2 flex 2512-003 3/4 EMT to 3/4 flex 2512-016 1 EMT to 1 flex 25

EMT-to-flex couplings Part Trade StandardNumber Sizes Packaging*

12-012 1/2 EMT to flex 5012-013 3/4 EMT to flex 25

Type LB/set screw (coverseparate/see below)


30-011 1/2 1030-012 3/4 1030-013 1 530-014 1-1/4 230-015 1-1/2 230-021 2 130-023† 2-1/2 1†30-023 comes with cover

Type LR/set screw (coverseparate/see below)


30-030 1/2 1030-031 3/4 1030-032 1 530-033 1-1/4 230-034 1-1/2 230-035 2 1

Type LL/set screw (coverseparate/see below)


30-040 1/2 1030-041 3/4 1030-042 1 530-043 1-1/4 230-044 1-1/2 230-045 2 1

Covers for access fittingsPart Trade StandardNumber Sizes Packaging*

30-017 1/2 5030-018 3/4 5030-019 1 5030-020 1-1/4 to 1-1/2 5030-022 2 25

EMT Conduit Bodies UL listed, CSA certified

EMT-to-Flex Couplings UL listed, CSA certified

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

98

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Metal Wireway FittingsUL listed, CSA certified

ReducersPart Adapts from this size... ...to this sizeNumber inches inches

URED 2542525CSA 2-1/2 x 4 2-1/2 x 2-1/2URED 254256CSA 2-1/2 x 4 2-1/2 x 6URED 25666CSA 2-1/2 x 6 6 x 6 URED 25888CSA 2-1/2 x 8 8 x 8 URED 442525CSA 4 x 4 2-1/2 x 2-1/2URED 44254CSA 4 x 4 2-1/2 x 4 URED 44256CSA 4 x 4 2-1/2 x 6URED 4446CSA 4 x 4 4 x 6URED 4448CSA 4 x 4 4 x 8 URED 46254CSA 4 x 6 2-1/2 x 4 URED 48254CSA 4 x 8 2-1/2 x 4 URED 6644CSA 6 x 6 4 x 4 URED 6664CSA 6 x 6 6 x 4 URED 8844CSA 8 x 8 4 x 4 URED 25844CSA* 2-1/2 x 8 4 x 4URED 48256CSA* 4 x 8 2-1/2 X 6 URED 8848CSA* 8 x 8 4 x 8 URED 8866CSA* 8 x 8 6 x 6

Component specifications:

Tolerances: Inside dimensions from 0 to + 1/16 in.; joints, corners and adjoining edges to + 1/32 in.; screw &hole placement to + 1/32 in.Materials: Hot-dipped, mill-galvanized sheet metal to UL 870 & CSA C22.2 No. 26

REDUCERURED


Tolerances: Inside dimensions from 0 to + 1/16 in.; joints, corners and adjoining edges to + 1/32 in.; screw& hole placement to + 1/32 in.Materials: Hot-dipped, mill-galvanized sheet metal to UL 870 & CSA C22.2 No. 26Standard connector slots: 3/4 in. by 1/4 in.

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

99

Tees/Type CPart Dimension A Dimension B For use with Trough P/NNumber inches inches

UTEE 2525CSA 2-1/2 2-1/2 UGTR 2525120CSAUTEE 254CSA 2-1/2 4 UGTR 254120CSAUTEE 256CSA 2-1/2 6 UGTR 256120CSAUTEE 258CSA 2-1/2 8 UGTR 258120CSAUTEE 44CSA 4 4 UGTR 44120CSAUTEE 46CSA 4 6 UGTR 46120CSAUTEE 48CSA 4 8 UGTR 48120CSAUTEE 66CSA 6 6 UGTR 66120CSAUTEE 88CSA 8 8 UGTR 88120CSA

Tees/Type DPart Dimension A Dimension B For use with Trough P/NNumber inches inches

UTEE 425CSA 2-1/2 4 UGTR 254120CSAUTEE 625CSA 2-1/2 6 UGTR 256120CSAUTEE 825CSA 2-1/2 8 UGTR 258120CSAUTEE 64CSA 4 6 UGTR 46120CSAUTEE 84CSA 4 8 UGTR 48120CSA

Crossovers/Type CPart Dimension A Dimension B For use with Trough P/NNumber inches inches

UCRS 2525CSA 2-1/2 2-1/2 UGTR 2525120CSAUCRS 254CSA 2-1/2 4 UGTR 254120CSAUCRS 256CSA 2-1/2 6 UGTR 256120CSAUCRS 258CSA 2-1/2 8 UGTR 258120CSAUCRS 44CSA 4 4 UGTR 44120CSAUCRS 46CSA 4 6 UGTR 46120CSAUCRS 48CSA 4 8 UGTR 48120CSAUCRS 66CSA 6 6 UGTR 66120CSAUCRS 88CSA 8 8 UGTR 88120CSA

Crossovers/Type DPart Dimension A Dimension B For use with Trough P/NNumber inches inches

UCRS 425CSA 2-1/2 4 UGTR 254120CSAUCRS 625CSA 2-1/2 6 UGTR 256120CSAUCRS 825CSA 2-1/2 8 UGTR 258120CSAUCRS 64CSA 4 6 UGTR 46120CSAUCRS 84CSA 4 8 UGTR 48120CSA


A

B

o oo

oo

A

B

A

B

A

B

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

100

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Metal WirewayUL listed, CSA certified as noted, meets elevator industry standards

Galvanized steel troughPart Dimension A Dimension B Dimension C Number inches inches inches

UGTR 2525120CSA 2-1/2 2-1/2 120UGTR 254120CSA* 2-1/2 4 120UGTR 256120CSA 2-1/2 6 120UGTR 258120CSA 2-1/2 8 120UGTR 44120CSA 4 4 120UGTR 46120CSA 4 6 120UGTR 48120CSA 4 8 120UGTR 66120CSA 6 6 120UGTR 88120CSA 8 8 120Special size trough and trough without knockouts are available with short lead times. Call Draka EP at 1-877-372-5237 for further information.

Covers, cover screws and plastic U-channel Part Description Dimension B Dimension C Number inches inches

C U25 Cover 2-1/2 60C U44 Cover 4 60 C U66 Cover 6 60C U88 Cover 8 6059-020 Cover screws, #10-32 x 1/2 in., packaged singly19-003 Plastic U-channel, available in 100 ft. rolls

Trough mounting bracket kit - used to attach trough to steel I-beams

Part Description QuantityNumber

TR-MTG-KIT Bracket, with 5 in. mounting bolt, nut and two washers 1

Strain barsPart For trough widthNumber inches

STB 25 2-1/2STB 4 4STB 6 6STB 8 8

NOTE: The NEC requires that strain bars be used to support wire every 100 ft. in trough.

Wireway nuts & bolts - used to attach fittings to wireway

Part Size Standard Number inches Packaging

26-006A 1/4 x 1/2 nut & bolt 2526-006B 1/4 x 1/2 nut & bolt 5026-006C 1/4 x 1/2 nut & bolt 100

AB

C

B


Tolerances: Inside dimensions from 0 to + 1/16in.; joints, corners and adjoining edges to +1/32 in.; screw & hole placement to + 1/32 in.Materials: Hot-dipped, mill-galvanized sheetmetal to UL 870 & CSA C22.2 No. 26General construction: Uniform knockouts 1/2in. and 3/4 in. every 12 in.*EXCEPT FOR UGTR 254120CSA which hasknockouts 1/2 in., 3/4 in. & 1 in. every 12 in.Included hardware: Two five-foot covers, #10-5/16 hexhead screws & screw protection; spot-welded coupling on one end


Tolerances: Inside dimensions from 0 to + 1/16 in.; joints, corners and adjoining edges to + 1/32 in.; screw & hole placement to + 1/32 in.Materials: Hot-dipped, mill-galvanized sheet metal to UL 870 & CSA C22.2 No. 26Standard connector slots: 3/4 in. by 1/4 in. Included hardware: #10-5/16 hexhead screws & screw protection

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

101


90° elbows/Type C Part Dimension A Dimension B For use with Trough P/NNumber inches inches

UL90 2525CSA 2-1/2 2-1/2 UGTR 2525120CSAUL90 254CSA 2-1/2 4 UGTR 254120CSAUL90 256CSA 2-1/2 6 UGTR 256120CSAUL90 258CSA 2-1/2 8 UGTR 258120CSAUL90 44CSA 4 4 UGTR 44120CSAUL90 46CSA 4 6 UGTR 46120CSAUL90 48CSA 4 8 UGTR 48120CSAUL90 66CSA 6 6 UGTR 66120CSAUL90 88CSA 8 8 UGTR 88120CSA

90° elbows/Type DPart Dimension A Dimension B For use with Trough P/NNumber inches inches

UL90 425CSA 2-1/2 4 UGTR 254120CSAUL90 625CSA 2-1/2 6 UGTR 256120CSAUL90 825CSA 2-1/2 8 UGTR 258120CSAUL90 64CSA 4 6 UGTR 46120CSAUL90 84CSA 4 8 UGTR 48120CSA

45° elbows/Type CPart Dimension A Dimension B For use with Trough P/NNumber inches inches

UL45 2525CSA 2-1/2 2-1/2 UGTR 2525120CSAUL45 254CSA 2-1/2 4 UGTR 254120CSAUL45 256CSA 2-1/2 6 UGTR 256120CSAUL45 258CSA 2-1/2 8 UGTR 258120CSAUL45 44CSA 4 4 UGTR 44120CSAUL45 46CSA 4 6 UGTR 46120CSAUL45 48CSA 4 8 UGTR 48120CSAUL45 66CSA 6 6 UGTR 66120CSAUL45 88CSA 8 8 UGTR 88120CSA

45° elbows/Type DPart Dimension A Dimension B For use with Trough P/NNumber inches inches

UL45 425CSA 2-1/2 4 UGTR 254120CSAUL45 625CSA 2-1/2 6 UGTR 256120CSAUL45 825CSA 2-1/2 8 UGTR 258120CSAUL45 64CSA 4 6 UGTR 46120CSAUL45 84CSA 4 8 UGTR 48120CSA

o

o

A

B

A

B

A

B

A

B

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

102

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

CouplingsPart Dimension A Dimension B Number inches inches

UCON 2525CSA 2-1/8 2-7/16UCON 254CSA 2-1/8 3-15/16UCON 256CSA 2-1/8 5-15/16UCON 258CSA 2-1/8 7-15/16UCON 44CSA 3-5/8 3-15/16UCON 46CSA 3-5/8 5-15/16UCON 48CSA 3-5/8 7-15/16UCON 66CSA 5-5/8 5-15/16UCON 88CSA 7-5/8 7-15/16

Panel connectorsPart Dimension A Dimension B Number inches inches

UPCN 2525CSA 2-1/8 2-7/16UPCN 254CSA 2-1/8 3-15/16UPCN 256CSA 2-1/8 5-15/16UPCN 258CSA 2-1/8 7-15/16UPCN 44CSA 3-5/8 3-15/16UPCN 46CSA 3-5/8 5-15/16UPCN 48CSA 3-5/8 7-15/16UPCN 66CSA 5-5/8 5-15/16UPCN 88CSA 7-5/8 7-15/16

End platesPart Dimension A Dimension B Number inches inches

UEPT 2525CSA 2-1/8 2-7/16UEPT 254CSA 2-1/8 3-15/16UEPT 256CSA 2-1/8 5-15/16UEPT 258CSA 2-1/8 7-15/16UEPT 44CSA 3-5/8 3-15/16UEPT 46CSA 3-5/8 5-15/16UEPT 48CSA 3-5/8 7-15/16UEPT 66CSA 5-5/8 5-15/16UEPT 88CSA 7-5/8 7-15/16

Insulated bushingsPart Dimension A Dimension B Number inches inches

UISB 2525CSA 2-1/8 2-7/16UISB 254CSA 2-1/8 3-15/16UISB 256CSA 2-1/8 5-15/16UISB 258CSA 2-1/8 7-15/16UISB 44CSA 3-5/8 3-15/16UISB 46CSA 3-5/8 5-15/16UISB 48CSA 3-5/8 7-15/16UISB 66CSA 5-5/8 5-15/16UISB 88CSA 7-5/8 7-15/16


AB

AB

B

A

B A

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

103

Electrical Metallic Tubing (EMT) and FittingsUL listed, CSA certified as noted

90° elbows Part Trade StandardNumber Sizes Packaging*

02-005 1/2 5002-006 3/4 5002-001 1 2502-002 1-1/4 2002-003 1-1/2 2002-004 2 1002-010 2-1/2 1

Steel hangers with bolts Part Trade StandardNumber Sizes Packaging*

78-053 1/2 10078-078 3/4 10078-054 1 10078-080 1-1/4 10078-055 1-1/2 100

Steel lock nuts

Part Trade StandardNumber Sizes Packaging

07-001 1/2 10007-002 3/4 10007-005 1 10007-006 1-1/4 5007-004 1-1/2 5007-003 2 5007-007 2-1/2 25

Steel reducing washers Part Trade StandardNumber Sizes Packaging*

45-001 3/4 - 1/2 25045-002 1 - 1/2 25045-009 1 - 3/4 25045-014 1-1/4 - 1/2 10045-024 1-1/4 - 3/4 10045-008 1-1/4 - 1 10045-010 1-1/2 - 1 10045-003 1-1/2 - 1-1/4 10045-004 2 - 1-1/4 5045-005 2 - 1-1/2 5045-038 2-1/2 - 1 50

EMT - lightweight, thin wall


01-001 1/2 100 ft.01-002 3/4 100 ft.01-003 1 100 ft.01-004 1-1/4 50 ft.01-005 1-1/2 50 ft.01-006 2 10 ft.01-007 2-1/2 10 ft.

Steel one-hole straps Part Trade StandardNumber Sizes Packaging*

05-000† 3/8 10005-001 1/2 10005-002 3/4 10005-003 1 5005-004 1-1/4 5005-005 1-1/2 2505-006 2 2005-014 2-1/2 10†05-000 not CSA certified

Die-cast chase nipples Part Trade StandardNumber Sizes Packaging*

06-001 1/2 10006-002 3/4 5006-005 1 2506-009 1-1/4 2506-010 1-1/2 2506-003 2 1006-011 2-1/2 10

Threaded plastic insulatedbushingsPart Trade StandardNumber Sizes Packaging*

27-006 1/2 10027-007 3/4 10027-005 1 5027-002 1-1/4 2527-003 1-1/2 2527-004 2 1027-022 2-1/2 10

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

104

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Flexible Conduit and FittingsUL listed, CSA certified as noted

Thin-wall steel conduit Part Trade StandardNumber Sizes Packaging*

03-001 3/8 2000 ft. reel03-002 1/2 1000 ft. reel03-003 3/4 500 ft. reel03-004 1 50 ft. coil03-005 1-1/4 50 ft. coil03-006 1-1/2 50 ft. coil03-007 2 25 ft. coil

Die-cast 90° squeeze-typeflex box connectors Part Trade StandardNumber Sizes Packaging*

11-001 3/8 5011-002 1/2 2511-003 3/4 1011-004 1 511-005 1-1/4 1011-006 1-1/2 511-008 2 5

Die-cast straight squeeze-typeflex box connectors Part Trade StandardNumber Sizes Packaging*

10-001 3/8 5010-002 1/2 2510-003 3/4 2510-004 1 1010-005 1-1/4 1010-006 1-1/2 510-010 2 10

Die-cast 45° squeeze-typeflex box connectors Part Trade StandardNumber Sizes Packaging*

11-034 3/8 2511-035 1/2 1011-036 3/4 50

Malleable iron 90° squeeze-type flex box connectors Part Trade StandardNumber Sizes Packaging*

69-028 3/8 5069-029 1/2 2569-030 3/4 1069-031 1 569-032 1-1/4 2569-033 1-1/2 5

Malleable iron straight squeeze-type flex box connectors Part Trade StandardNumber Sizes Packaging*

69-035 3/8 5069-036 1/2 5069-037 3/4 2569-038 1 2569-039 1-1/4 2569-040 1-1/2 569-041 2 10

Screw-in connectors for flexPart Trade StandardNumber Sizes Packaging*

10-021 1/2 5010-022 3/4 2510-023 1 2510-035 1-1/4 1010-029 1-1/2 1010-036 2 1011-045 90° ‘Jake L’ for 1/2 2511-046 90° ‘Jake L’ for 3/4 1511-064 90° ‘Jake L’ for 1 10

Screw-in couplings for flexPart Trade StandardNumber Sizes Packaging*

12-101 1/2 5012-102 3/4 2512-100 1 15

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

105

Liquid-tight flexible steel conduit Part Trade StandardNumber Sizes Packaging*

03-032 3/8 2000 ft. reel03-012 1/2 1000 ft. reel03-013 3/4 500 ft. reel03-014 1 50 ft. coil03-015 1-1/4 50 ft. coil03-016 1-1/2 50 ft. coil

Liquid-tight die-cast straight zinc connectorsPart Trade StandardNumber Sizes Packaging*

10-017 3/8 5010-011 1/2 2510-015 3/4 2510-013 1 1010-012 1-1/4 1010-099 1-1/2 5

Liquid-tight die-cast 90° zinc connectors Part Trade StandardNumber Sizes Packaging*

11-052 3/8 5011-009 1/2 2511-013 3/4 1011-011 1 511-012 1-1/4 1011-015 1-1/2 5

Liquid-tight Flexible Conduit and FittingsUL listed, CSA certified

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

106

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Threaded Fittings for Rigid PipeUL listed, CSA certified as noted

LB conduit bodies Part TradeNumber Sizes

30-052 1/2, includes cover & gasket30-058 3/4, includes cover & gasket30-053 1, includes cover & gasket30-065 1-1/4, includes cover & gasket30-066 1-1/2, includes cover & gasket30-046 2, includes cover & gasket30-051 2-1/2, includes cover & gasket

LR conduit bodies Part TradeNumber Sizes


LL conduit bodies Part TradeNumber Sizes


TEE conduit bodies Part TradeNumber Sizes

30-106 1/2, includes cover & gasket30-107 3/4, includes cover & gasket30-115 1, includes cover & gasket31-044 1-1/4, includes cover & gasket30-105 1-1/2, includes cover & gasket30-108 2, includes cover & gasket

Threaded couplings Part TradeNumber Sizes

09-041 1/209-042 3/409-052 109-045 1-1/409-046 1-1/209-043 209-044 2-1/2

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

107

Electrical Boxes UL listed

4” square ‘1900’ boxes 1-1/2” deep - type 52151

Part K/O Trade StandardNumber Sizes Packaging*

04-020 1/2 5004-021 3/4 5004-022 1/2 & 3/4 50

4” square ‘1900’ boxes2-1/8” deep - type 52171


04-024 1/2 & 3/4 5004-025 1 25

4-11/16” square boxes 2-1/8” deep - type 72171


04-041 1/2 & 3/4 25

4” x 2-1/8” utility ‘handy’ boxes 1-7/8” deep - type 58361


04-026 1/2 5004-027 3/4 50

4” x 2-1/8” utility ‘handy’ boxes2-1/8” deep - type 58371


04-028 1/2 5004-029 3/4 50

4” octagonal boxes 1-1/2” deep - type 54151


42-012 1/2 5042-011 3/4 50

4” octagonal boxes2-1/8” deep - type 54171


42-008 1 50

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

108

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

4-11/16” x 4-11/16” box coverPart Description Fits these StandardNumber Part Numbers Packaging*

04-040 Box cover 04-041 50

4” x 4” octagonal box coverPart Description Fits these StandardNumber Part Numbers Packaging*

42-013 Box cover 42-008 50 42-011 42-012

4” x 2-1/8” switch platePart Description Fits these StandardNumber Part Numbers Packaging*

04-039 Switch plate 04-026 25 04-027 04-028 04-029

4” x 4” box cover Part Description Fits these StandardNumber Part Numbers Packaging*

04-030 Box cover 04-020 50 04-021 04-022 04-024 04-025

4” x 2-1/8” outlet cover Part Description Fits these StandardNumber Part Numbers Packaging*

04-037 Outlet cover 04-026 25 04-027 04-028 04-029

4” x 2-1/8” outlet plate Part Description Fits these StandardNumber Part Numbers Packaging*

04-038 Outlet plate 04-026 25 04-027 04-028 04-029

GFCI outlet Part Description StandardNumber Packaging*

37-178 GFCI with cover, 10 125VAC, 15A

Box Covers, Plates and Fixtures UL listed, CSA certified

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

109

Junction Boxes and Knockout Punches/Plugs UL listed, CSA certified as noted

Junction boxes - with cover and terminals

Part H x W Depth and Capacity StandardNumber inches inches • wire count Packaging

43-036 13-3/4 x 8-1/2 3-1/4 • 36 terminals, 72 wires 143-072 24 x 8-1/2 3-1/4 • 72 terminals, 144 wires 143-108 36 x 8-1/2 3-1/4 • 108 terminals, 216 wires 1

Junction boxes have knockoutson top, bottom and sides.

Top/bottom knockouts are 2and 1-1/2 in - sides are 2, 1-1/2,3/4 and 1/2 in.

Photo shows box withcomponents that may beordered separately.

Junction box componentsPart Description StandardNumber Packaging*

78-206 Tubular terminal clamps, 100 (Buchanan 0925)

78-007 Channel clamps, 100 (Buchanan 61)

78-208 End section, 25 (Buchanan 0930)

78-009 Zinc-plated track, 6 ft. lengths (Buchanan 60)

NOTE: 78-009 is not UL listed/CSA certified.

78-208

78-206

78-007

78-009

Screw-cover pull boxes - with cover and knockouts

Part H x W Depth K/ONumber inches inches Pattern

42-007 4 x 4 4 A42-006 6 x 6 4 B42-054 8 x 8 4 B42-025 10 x 10 4 B42-051 12 x 12 4 C42-022 18 x 18 4 D42-021 24 x 24 4 D42-055 8 x 8 6 B

Metal knockout plugPart Size StandardNumber inches Packaging*

19-021 1/2 10019-026 3/4 10019-027 1 5019-028 1-1/4 5019-029 1-1/2 5019-030 2 25

Pattern A1/2 - 3/4”

Pattern B1/2 - 3/4” & 3/4 - 1”

Pattern C1/2 - 3/4” & 3/4 - 1”

Pattern D1/2 - 3/4” & 3/4 - 1”

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

110

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

General informationGustav Wolf is a Draka Elevator Products’ Approved Partner. The GustavWolf wire ropes we offer have been designed and manufactured byGustav Wolf to meet the requirements of the elevator industry worldwide.Gustav Wolf offers a full line of elevator wire ropes, including:

“Low-stretch” fiber core wire rope in Iron, Traction and Extra HighStrength Traction grades that provide the benefits of pre-stretchingwithout paying the premium price,

PAWO F3 steel reinforced core wire rope for high-rise/high-speedelevators to reduce or eliminate the labor cost of repeated ropeshortenings. It can be used wherever EHST grade is specified, and

CompactTrac™ compacted-strand fiber core wire rope for use withreverse bends and basement machines to extend rope life.

Ordering hoist ropesThe information needed to order wire rope is the number (quantity),length and diameter of the ropes; their stranding, construction and lay;their grade or tensile strength; and their breaking load. While thisinformation may be provided on the wire rope tag, it should be noted thatthe tag information may not always be accurate. For instance, it is notuncommon to find that the wrong tag has been applied. Use the followingprocedure for ordering hoist ropes for a traction elevator:

1) Count the number of ropes on the elevator.

2) Determine the length of each rope. The length can often be found on the installation layout.

3) Measure the diameter of the ropes. If you don’t have a measuring tool, the crosshead data plate on top of the car should show the diameter or the diameter may be stamped on the existing shackles.

4) Determine the stranding and construction of the rope. Stranding is the number of strands per rope and the number of wires perstrand (ex. an 8-stranded rope with 19 wires per strand has 8 x 19stranding). Determine whether the rope has 6 or 8 strands by looking atthe shackles where the stranding is more easily seen. The ropeconstruction (Seale, Warrington, Filler Wire, etc.) can be found bymatching up the rope cross-section with the cross-section shown on thefollowing pages. A 6-strand hoist rope is usually 6 x 25 Filler Wireconstruction with Right Regular lay. If there is not a crosshead data plateand the building is over 50 years old, the ropes used are usually 6 x 25Filler Wire with Right Regular lay. An 8-strand hoist rope is usually 8 x 19Seale. Lay can vary (see Step 5 below).

5) Determine the lay of the rope. Compare a Right Regular lay rope to a Right Lang lay rope:

Note that the orientation of the individual wires is parallel to the centerline in a Right Regular lay rope. Right Regular lay is assumed if the lay is not indicated on your order.

Wire Rope by Gustav Wolf GmbH

6) Determine the grade or tensile strength of the rope. Grades are Iron, Traction or Extra High Strength Traction. Iron rope is normally used for governor and compensation ropes. Traction rope can be used for hoist, governor and compensation applications. Extra High Strength Traction rope is needed for high-rise/high-speed hoisting conditions. Grade is sometimes expressed as tensile strength in Newtons/square millimeters (N/mm2) or pounds/square inch (psi).

7) Determine the breaking load, which is indicated on the crosshead data plate. For example, if a breaking load of 14,500 lbs. is indicated for 1/2 in. diameter 8 x 19 ropes, refer to the information in this catalog or call your Draka representative for the correct grade (in this case, traction grade).

Other factors:

Core: Vegetable fiber is the most common core used in elevator ropes inNorth America. However, in some high-rise/high-speed and certainhydraulic applications, the use of steel reinforced or full steel core(IWRC) ropes is becoming more common. Contact your Drakarepresentative for more information.

Preforming: Preformed rope is the industry standard and provideslonger operational life while being easier to handle. All the ropes in thiscatalog are preformed.

Coating: Bright (uncoated) is the industry standard and comes withoutany coating on the rope other than lubrication. For protection fromweather and corrosion (ex. exterior or mine elevators), the use of agalvanized coating is often recommended. Gustav Wolf 1/2 in. and 5/8 in.8 x 19 Seale galvanized hoist ropes are in stock for immediate delivery.

Ordering governor and/or compensation ropesThe ordering procedure is similar to hoist ropes but you may have to relyon the rope tag to a greater degree because there is no crosshead dataplate for governor or compensation ropes. However:

1) Measure the diameter of the ropes with a caliper, micrometer or Go/No Go gauge.

2) Go to the shackles and confirm the stranding (6 or 8) of the ropes. Almost all compensation and governor ropes have 8 strands (refer to the rope cross sections shown on the following pages). Look at the rope tag to determine breaking strength and then refer to the information in this catalog or call your Draka representative for the correct grade (Iron or Traction).

3) Consider the rope grade or tensile strength. Governor and compensation ropes are either Iron or Traction - never Extra High Strength Traction.

4) The lay of governor and compensation ropes is almost always Right Regular and never Right Lang. If your tag shows Lang lay, take extra care to visually confirm it using Step 5 in the Hoist Ropes section above.

Other factors: Preformed rope is always preferred for its longer life andease of installation. Replace all governor and compensation ropes withpreformed ropes.

Right Regular Right Lang

954.971.1115 / fax 954.917.7337 800.526.0026

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

111

www.SEESinc.com

Hoist - 8 x 19 Seale with fiber core

Part Application Diameter Grade Right Lay Breaking Load Net WeightNumber inches lbs • N lbs/ft • kg/m

80-000 Hoist 1/4 Traction Regular 3600 • 16000 0.09 • 0.1380-001 Hoist 3/8 Traction Regular 8200 • 36400 0.21 • 0.3180-001EHS Hoist 3/8 EHST Regular 9900 • 44100 0.21 • 0.3180-002 Hoist 1/2 Traction Regular 14500 • 64500 0.36 • 0.5480-002LL Hoist 1/2 Traction Lang 14500 • 64500 0.36 • 0.5480-002EHS Hoist 1/2 EHST Regular 17500 • 77800 0.36 • 0.5480-002EHSLL Hoist 1/2 EHST Lang 17500 • 77800 0.36 • 0.5480-038 Hoist 9/16 Traction Regular 18500 • 82300 0.46 • 0.6880-038EHS Hoist 9/16 EHST Regular 22100 • 98400 0.46 • 0.6880-003 Hoist 5/8 Traction Regular 23000 • 102300 0.58 • 0.8680-003LL Hoist 5/8 Traction Lang 23000 • 102300 0.58 • 0.8680-003EHS Hoist 5/8 EHST Regular 27200 • 121000 0.58 • 0.8680-003EHSLL Hoist 5/8 EHST Lang 27200 • 121000 0.58 • 0.8680-039 Hoist 11/16 Traction Regular 27000 • 120100 0.69 • 1.0380-039LL Hoist 11/16 Traction Lang 27000 • 120100 0.69 • 1.0380-039EHS Hoist 11/16 EHST Regular 32800 • 145900 0.69 • 1.0380-013 Hoist 3/4 Traction Regular 32000 • 142300 0.82 • 1.2280-040 Hoist 13/16 Traction Regular 37000 • 164600 0.96 • 1.4380-014 Hoist 7/8 Traction Regular 42000 • 186800 1.11 • 1.6580-042 Hoist 1 Traction Regular 54000 • 240200 1.45 • 2.16

Governor - 8 x 19 Warrington with fiber corePart Application Diameter Grade Right Lay Breaking Load Net WeightNumber inches lbs • N lbs/ft • kg/m

80-001W Governor 3/8 Traction Regular 8200 • 36400 0.20 • 0.3080-010IRONW Governor 3/8 Iron Regular 4200 • 18600 0.20 • 0.3080-007IRONW Governor 7/16 Iron Regular 5600 • 24900 0.28 • 0.42

Hoist and compensation/governor - 6 x 25 Filler Wire with fiber corePart Application Diameter Grade Right Lay Breaking Load Net WeightNumber inches lbs • N lbs/ft • kg/m

80-075FW Hoist 1/2 Traction Regular 14500 • 64500 0.40 • 0.6080-075EHSFW Hoist 1/2 EHST Regular 20400 • 90700 0.40 • 0.6080-076FW Hoist 5/8 Traction Regular 23000 • 102300 0.63 • 0.9480-076IRONFW Comp./Gov. 5/8 Iron Regular 12800 • 56900 0.63 • 0.94

Compensation/governor - 8 x 25 Filler Wire with fiber core


80-002FW Comp./Gov. 1/2 Traction Regular 14500 • 64500 0.36 • 0.5480-011IRONFW Comp./Gov. 1/2 Iron Regular 7200 • 32000 0.36 • 0.5480-003FW Comp./Gov. 5/8 Traction Regular 23000 • 102300 0.62 • 0.9280-012IRONFW Comp./Gov. 5/8 Iron Regular 11200 • 49800 0.62 • 0.92

Wire Rope by Gustav Wolf GmbHImperial diameters to meet ASME A17 for standard applications

a a a a aaaaaaa aaaaaaaaaa a aaaaaaaaaaa a a aa aa a aaaaaaa aaaaaaaaaa a aaaa aa a aaaaaaa aaaaaaaaaa a aaaa aa a aaaaaaa aaaaaaaaaa a aaaaaaaaaaa a a a

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

112

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

PAWO F3 - 8 x 19 Seale with steel reinforced core for high-rise/high-speed applications wherever EHST grade is specified

Part Application Diameter Tensile Strength Right Lay Breaking Load Net WeightNumber inches N/mm2 lbs • N lbs/ft • kg/m

80-016 Hoist 3/8 1570 Regular 12200 • 54400 0.23 • 0.35 80-020 Hoist 1/2 1570 Regular 22100 • 98300 0.42 • 0.63 80-024 Hoist 5/8 1570 Regular 34800 • 154800 0.66 • 0.99

CompactTrac™ compacted strand - 8 x 19 Seale with fiber core for applications with reverse bends (e.g. basement machines)


80-001CSLL Hoist 3/8 Traction Lang 9400 • 41800 0.32 • 0.3480-002CSLL Hoist 1/2 Traction Lang 17000 • 75800 0.39 • 0.5880-003CSLL Hoist 5/8 Traction Lang 26900 • 119800 0.62 • 0.92

Galvanized - 8 x 19 Seale with fiber core for protection from weather and corrosion


80-002G Hoist 1/2 Traction Regular 14900 • 66400 0.36 • 0.54 80-003G Hoist 5/8 Traction Regular 23600 • 105400 0.57 • 0.85

Wire Rope by Gustav Wolf GmbHImperial diameters to meet ASME A17 for special hoist applications a aaa aaaaaa aa a aaaaaaa aaaaaaaaaa a aaaaaaaaaaa a a aa aa a aaaaaaa aaaaaaaaaa a aaaaaaaaaaa a a a

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

113

Wire Rope by Gustav Wolf GmbHMetric diameters to meet ISO 4344 and EN 12385

Metric hoist and hoist/compensation F 819 S-FE DT - 8 x 19 Seale with fiber corePart Application Diameter Tensile Strength Right Lay Breaking Load Net WeightNumber mm N/mm2 lbs • N lbs/ft • kg/m

80-005 Hoist 8.0 1370/1770 Regular 6800 • 30500 0.15 • 0.2280-090 Hoist 9.0 1370/1770 Regular 8600 • 38400 0.19 • 0.2880-006 Hoist 10.0 1370/1770 Regular 10800 • 48200 0.23 • 0.3580-007 Hoist 11.0 1370/1770 Regular 13100 • 58400 0.29 • 0.4380-008 Hoist 12.0 1370/1770 Regular 15500 • 69200 0.34 • 0.5080-009 Hoist 13.0 1370/1770 Regular 18100 • 80700 0.40 • 0.5980-096 Hoist 14.0 1370/1770 Regular 20900 • 93000 0.46 • 0.6880-098 Hoist/Comp. 16.0 1370/1770 Regular 27200 • 121000 0.60 • 0.8980-099 Hoist/Comp. 18.0 1370/1770 Regular 34600 • 154000 0.74 • 1.1180-091 Hoist/Comp. 19.0 1370/1770 Regular 38400 • 171000 0.84 • 1.26

Metric governor - 6 x 19 Standard 1 + 6 + 12 with fiber core

Part Application Diameter Tensile Strength Right Lay Breaking Load Net WeightNumber mm N/mm2 lbs • N lbs/ft • kg/m

80-083* Hoist/Gov. 6.0 1770 Regular 4700 • 21000 0.08 • 0.1280-084 Hoist 6.5 1770 Regular 5500 • 24700 0.09 • 0.1480-085 Hoist 8.0 1770 Regular 8400 • 37400 0.15 • 0.22

Metric hoist PAWO F3 - 8 x 19 Seale with steel reinforced core

Part Application Diameter Tensile Strength Right Lay Breaking Load Net WeightNumber mm N/mm2 lbs • N lbs/ft • kg/m

80-045 Hoist/Gov. 8.0 1570 Regular 8500 • 38000 0.16 • 0.2480-015 Hoist 9.0 1570 Regular 10800 • 48300 0.21 • 0.3180-017 Hoist 10.0 1570 Regular 13600 • 60500 0.26 • 0.3980-018 Hoist 11.0 1570 Regular 16500 • 73400 0.31 • 0.4780-019 Hoist 12.0 1570 Regular 19500 • 86800 0.37 • 0.5580-021 Hoist 13.0 1570 Regular 23200 • 103100 0.44 • 0.6680-022 Hoist 14.0 1570 Regular 26800 • 119300 0.51 • 0.7680-024 Hoist 16.0 1570 Regular 34800 • 154800 0.66 • 0.9980-026 Hoist 18.0 1570 Regular 43500 • 193600 0.82 • 1.2380-048 Hoist 19.0 1570 Regular 48900 • 217600 0.92 • 1.38

Metric governor PAWO F3 - 6 x 19 Seale with steel reinforced corePart Application Diameter Tensile Strength Right Lay Breaking Load Net WeightNumber mm N/mm2 lbs • N lbs/ft • kg/m

80-086 Hoist/Gov. 6.0 1960 Regular 6200 • 27500 0.10 • 0.1580-043 Governor 6.5 1570 Regular 5800 • 25900 0.11 • 0.16

a aa a aaaaaaa aaaaaaaaaa a aaaa aa aa aa a aaaaaaa aaaaaaaaaa a aaaaaaaaaaa a a a a aaa aaaaa

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

114

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N


Metric hoist PAWO F7 - 8 x 19 Warrington with steel reinforced corePart Application Diameter Tensile Strength Right Lay Breaking Load Net WeightNumber mm N/mm2 lbs • N lbs/ft • kg/m

80-056 Hoist 8.0 1570 Regular 9100 • 40600 0.17 • 0.2680-027 Hoist 9.0 1570 Regular 11600 • 51800 0.22 • 0.3380-029 Hoist 10.0 1570 Regular 14200 • 63400 0.27 • 0.4080-030 Hoist 11.0 1570 Regular 17300 • 76800 0.33 • 0.4980-031 Hoist 12.0 1570 Regular 20400 • 90700 0.39 • 0.5880-033 Hoist 13.0 1570 Regular 23600 • 105000 0.45 • 0.6780-034 Hoist 14.0 1570 Regular 27900 • 124300 0.53 • 0.7980-036 Hoist 16.0 1570 Regular 36000 • 160400 0.68 • 1.0280-004 Hoist 18.0 1570 Regular 45200 • 201200 0.86 • 1.2880-059 Hoist 19.0 1570 Regular 50700 • 225600 0.96 • 1.43

Metric hoist PAWO F7S - 8 x 19 Warrington with Independent Wire Rope CorePart Application Diameter Tensile Strength Right Lay Breaking Load Net WeightNumber mm N/mm2 lbs • N lbs/ft • kg/m

80-056SC Hoist 8.0 1570 Regular 10000 • 44600 0.19 • 0.2880-027SC Hoist 9.0 1570 Regular 12600 • 56000 0.24 • 0.3680-029SC Hoist 10.0 1570 Regular 15600 • 69500 0.29 • 0.4480-030SC Hoist 11.0 1570 Regular 18700 • 83100 0.36 • 0.5380-031SC Hoist 12.0 1570 Regular 22200 • 98900 0.42 • 0.6380-033SC Hoist 13.0 1570 Regular 26100 • 116000 0.49 • 0.7380-034SC Hoist 14.0 1570 Regular 30300 • 134800 0.58 • 0.8680-036SC Hoist 16.0 1570 Regular 39600 • 176100 0.74 • 1 .1 180-004SC Hoist 18.0 1570 Regular 49100 • 218600 0.93 • 1.3980-059SC Hoist 19.0 1570 Regular 55100 • 245200 1.05 • 1.56

a aa aaaaaaaa aaaaa

Metric hoist PAWO F10 - 9 x 17 Filler Wire with Independent Wire Rope CorePart Application Diameter Tensile Strength Right Lay Breaking Load Net WeightNumber mm N/mm2 lbs • N lbs/ft • kg/m

80-102 Hoist 8.0 1570 Regular 9700 • 43200 0.19 • 0.2880-103 Hoist 9.0 1570 Regular 12300 • 54800 0.23 • 0.3580-105 Hoist 10.0 1570 Regular 15100 • 67200 0.29 • 0.4380-106 Hoist 11.0 1570 Regular 18000 • 80200 0.35 • 0.5280-107 Hoist 12.0 1570 Regular 21500 • 95600 0.42 • 0.63

Metric hoist PAWO F10 - 9 x 21 Filler Wire with Independent Wire Rope CorePart Application Diameter Tensile Strength Right Lay Breaking Load Net WeightNumber mm N/mm2 lbs • N lbs/ft • kg/m

80-109 Hoist 13.0 1570 Regular 25500 • 113400 0.50 • 0.7580-110 Hoist 14.0 1570 Regular 30500 • 135700 0.59 • 0.8880-113 Hoist 16.0 1570 Regular 39100 • 174000 0.76 • 1.1480-116 Hoist 18.0 1570 Regular 49400 • 219700 0.96 • 1.4480-117 Hoist 19.0 1570 Regular 55000 • 244900 1.08 • 1.61

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

115


800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

116

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Wire Rope Wedge SocketsImperial sizes to meet ASME A17 • New York MEA approval

Wire rope wedge socketsPart Rope size Dim (A) nom Dim (B) nom Dim (C) nom Usable Thread min Dim (D) nomNumber inches • mm inches • mm inches • mm inches • mm inches • mm inches • mm (+/- 3/16 • 5) (+/- 3/16 • 5) (+/- 3/8 • 10)

WSY-38-12 5/16 to 3/8 • 8 to 10 17-1/2 • 445 12-19/32 • 320 M12 7-7/8 • 200 8-27/32 • 225WSY-38-18 5/16 to 3/8 • 8 to 10 23-3/4 • 605 18-7/8 • 480 M12 9-13/16 • 250 10-13/16 • 275WSY-38-24 5/16 to 3/8 • 8 to 10 30-1/8 • 765 24-3/16 • 640 M12 15-3/4 • 400 16-23/32 • 425WSY-12-12-A 7/16 to 1/2 • 11 to 13 18 • 457 12-19/32 • 320 M20 7-7/8 • 200 8-27/32 • 225WSY-12-18-A 7/16 to 1/2 • 11 to 13 24-3/8 • 619 18-7/8 • 480 M20 9-13/16 • 250 10-13/16 • 275WSY-12-24-A 7/16 to 1/2 • 11 to 13 30-5/8 • 778 24-3/16 • 640 M20 15-3/4 • 400 16-23/32 • 425WSY-12-30-A 7/16 to 1/2 • 11 to 13 36-7/8 • 937 30-1/2 • 800 M20 15-3/4 • 400 16-23/32 • 425WSY-12-36-A 7/16 to 1/2 • 11 to 13 43-1/4 • 1099 36-13/16 • 960 M20 15-3/4 • 400 16-23/32 • 425WSY-58-12 9/16 to 5/8 • 14 to 16 19-3/4 • 502 12-19/32 • 320 M20 7-7/8 • 200 8-27/32 • 225WSY-58-18 9/16 to 5/8 • 14 to 16 26-1/8 • 664 18-7/8 • 480 M20 9-13/16 • 250 10-13/16 • 275WSY-58-24 9/16 to 5/8 • 14 to 16 32-3/8 • 822 24-3/16 • 640 M20 15-3/4 • 400 16-23/32 • 425WSY-58-30 9/16 to 5/8 • 14 to 16 38-3/4 • 984 30-1/2 • 800 M20 15-3/4 • 400 16-23/32 • 425WSY-58-36 9/16 to 5/8 • 14 to 16 45 • 1143 36-13/16 • 960 M20 15-3/4 • 400 16-23/32 • 425WSY-34-12 11/16 to 3/4 • 17.5 to 19 21-1/4 • 540 12-19/32 • 320 M24 7-7/8 • 200 8-27/32 • 225WSY-34-18 11/16 to 3/4 • 17.5 to 19 27-1/2 • 699 18-7/8 • 480 M24 9-13/16 • 250 10-13/16 • 275WSY-34-24 11/16 to 3/4 • 17.5 to 19 33-3/4 • 857 24-3/16 • 640 M24 15-3/4 • 400 16-23/32 • 425WSY-34-30 11/16 to 3/4 • 17.5 to 19 39-3/4 • 1010 30-1/2 • 800 M24 15-3/4 • 400 16-23/32 • 425WSY-34-36 11/16 to 3/4 • 17.5 to 19 46-1/4 • 1175 36-13/16 • 960 M24 15-3/4 • 400 16-23/32 • 425

Each wedge socket consists of the socket, rod, wedge, 2 nuts, 1 washer, 1 cotter pin and 2 retaining clips.

Draka EP wedge sockets are tested with steel core (IWRC) wire rope and exceed ASME A17.1 Rule 2.20.9 and all other applicable safety codes.Component Specifications:

Socket - Cast steel ASTM-A27, Grade 60-30 stress relievedRod - Rolled or forged steel ASTM 668Wedge - Cast steel ASTM-A27, Grade 60-30

Governor rope wedge socketsPart DescriptionNumber

WSY-38-GOV 3/8 • 10 mm governor rope wedge socket, includes socket, wedge & 2 retaining clips, 14 mm mounting holeWSY-12-GOV 1/2 • 13 mm governor rope wedge socket, includes socket, wedge & 2 retaining clips, 17.5 mm mounting hole

A

B

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

117

Wire Rope AccessoriesImperial-sized isolation bushings and Babbitt sockets

Rope isolation bushing springs - assemblies and componentsPart Size and Description Spring length† Spring O.D. Spring I.D.Number inches • mm inches • mm inches • mm inches • mm

WS-SA-38* 5/16 to 3/8 • 8 to 10 complete assembly n/a n/a n/aWS-SA-12-A* 7/16 to 1/2 • 11 to 13 complete assembly n/a n/a n/aWS-SA-58* 9/16 to 5/8 • 14 to 16 complete assembly n/a n/a n/aWS-SA-34* 11/16 to 3/4 • 17.5 to 19 complete assembly n/a n/a n/aWS-IBUSH-38 5/16 to 3/8 • 8 to 10 bushing n/a n/a n/aWS-IBUSH-12-A 7/16 to 1/2 • 11 to 13 bushing n/a n/a n/aWS-IBUSH-58 9/16 to 5/8 • 14 to 16 bushing n/a n/a n/aWS-IBUSH-34 11/16 to 3/4 • 17.5 to 19 bushing n/a n/a n/aWS-SPR-38 5/16 to 3/8 • 8 to 10 bushing spring 4-13/16 • 122 1-5/16 • 33 11/16 • 17 tolerances (+/- 1/8 • 3) (+/- 1/32 • 0.6) (+/- 1/32 • 0.6)WS-SPR-12 7/16 to 1/2 • 11 to 13 bushing spring 6-1/8 • 156 1-15/16 • 49.2 1 • 25.5 tolerances (+/- 9/64 • 3.5) (+/- 1/32 • 0.7) (+/- 1/32 • 0.7)WS-SPR-58 9/16 to 5/8 • 14 to 16 bushing spring 6-7/8 • 176 2-1/2 • 64 1-1/4 • 32 tolerances (+/- 1/8 • 3) (+/- 1/16 • 1.5) (+/- 1/16 • 1.5)WS-SPR-34 11/16 to 3/4 • 17.5 to 19 bushing spring 7-1/16 • 178 3-11/32 • 85 2-9/16 • 65 tolerances (+/-5/32 • 4) (+/- 3/32 • 2.5) (+/- 3/32 • 2.5)WS-BUSH-38 5/16 to 3/8 • 8 to 10 bushing washer n/a n/a n/aWS-BUSH-12-A 7/16 to 1/2 • 11 to 13 bushing washer n/a n/a n/aWS-BUSH-58 9/16 to 5/8 • 14 to 16 bushing washer n/a n/a n/aWS-BUSH-34 11/16 to 3/4 • 17.5 to 19 bushing washer n/a n/a n/a

*Isolation bushing spring assemblies include 1 spring, 3 bushings and 2 washers. They DO NOT include the wedge socket.†Spring measured when relaxedComponent Specifications

Socket - Cast steel ASTM-A27, Grade 60-30 stress relievedRod - Rolled or forged steel ASTM 668Wedge - Cast steel ASTM-A27, Grade 60-30

Babbitt sockets

Part For rope size Rod size Dim (A) nom Dim (B) nomNumber inches • mm inches • mm inches • mm

BSY-12-12 1/2 • 13 M20 18 • 457 12 • 305BSY-12-18 1/2 • 13 M20 24 • 610 18 • 457BSY-12-24 1/2 • 13 M20 30 • 762 24 • 610BSY-58-12 5/8 • 16 M24 19 • 483 12 • 305BSY-58-18 5/8 • 16 M24 25 • 635 18 • 457BSY-58-24 5/8 • 16 M24 31 • 787 24 • 61082-000 Babbitt material, one bar at approx 9.3 lbs • 4.3 kgComponent Specifications

Shackle - Forged carbon steel per JIS S35C or S38C equivalent to SAE 1035 or 1038, hot forged then normalized and tempered.Hex nuts - ASTM A563 Grade OCotter pin - Steel, per ANSI B5.20

A

B

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

118

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Wire Rope AccessoriesImperial-sized wedge socket components

Wedge socket individual componentsPart Size and DescriptionNumber inches • mm

WS-NUT-38 5/16 to 3/8 • 8 to 10 nutWS-NUT-12 7/16 to 1/2 • 11 to 13 nutWS-NUT-58 9/16 to 5/8 • 14 to 16 nutWS-NUT-34 11/16 to 3/4 • 17.5 to 19 nutWS-CPIN-38 5/16 to 3/8 • 8 to 10 cotter pinWS-CPIN-12 7/16 to 1/2 • 11 to 13 cotter pinWS-CPIN-58 9/16 to 5/8 • 14 to 16 cotter pinWS-CPIN-34 11/16 to 3/4 • 17.5 to 19 cotter pinWS-WSHR-38 5/16 to 3/8 • 8 to 10 washerWS-WSHR-12-A 7/16 to 1/2 • 11 to 13 washerWS-WSHR-58 9/16 to 5/8 • 14 to 16 washerWS-WSHR-34 11/16 to 3/4 • 17.5 to 19 washer

Wedge - Cast steel ASTM-A27, Grade 60-30

Wedge socket wedges - to fit ONLY Imperial-sized wedge sockets Part Size and DescriptionNumber inches

WS-WEDGE-3812 5/16 to 1/2 wedge insert (black)WS-WEDGE-58 9/16 to 5/8 wedge insert (red)WS-WEDGE-34 11/16 to 3/4 wedge insert (yellow)

Wedge socket retaining clipsPart Size and DescriptionNumber inches • mm

WS-CLIP-38 5/16 to 3/8 • 8 to 10 rope retaining clipWS-CLIP-1258 7/16 to 5/8 • 11 to 16 rope retaining clipWS-CLIP-34 11/16 to 3/4 • 17.5 to 19 rope retaining clip

Pulling grips - galvanized steel with rotating eyePart For Wire Rope Weave length MBLNumber Diameters kN

03302016 6.3 - 12.4 mm 660 mm 20.5 kN03302018 2.7 - 18.8 mm 810 mm 44.4 kN

03302044 6.3 - 12.4 mm 660 mm 20.5 kN03302046 2.7 - 18.8 mm 810 mm 44.4 kN

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

119

Wire Rope Accessories

Rope oilersPart DescriptionNumber

MIS-100 Automatic rope oiler, with 9” wickMIS-102 Automatic rope oiler, with 12” wickMIS-103 Extension bracket, for rope oilerMIS-103A Replacement wick, for all size rope oilersMIS-103B Replacement wick, 1/2” x 6 1/2” x 12”

Reeving splices by Preformed Line Products Part Color Code For Rope Diameter Length Rod DiameterNumber inches • mm inches • mm inches • mm

RS-2103 Yellow 3/8 • 9.5 22 • 559 .051 • 1.3RS-2105 Orange 1/2 • 12.7 29 • 736 .070 • 1.8RS-2107 Black 5/8 • 15.9 36 • 914 .086 • 2.2NOTE: A Reeving Splice consists of 3 pieces as shown and can not be reused.

Cable bandsPart DescriptionNumber

WR-CB-38 Cable bands for 3/8 in. rope 50WR-CB-12 Cable bands for 1/2 in. rope 50WR-CB-58 Cable bands for 5/8 in. rope 50

Wire rope clips - malleable ironPart DescriptionNumber

79-107 1/8 in. • 3.2 mm wire rope clip79-114 3/16 in. • 4.7 mm wire rope clip79-122 1/4 in. • 6.4 mm wire rope clip79-123 3/8 in. • 10 mm wire rope clip79-126 1/2 in. • 13 mm wire rope clip79-127 5/8 in. • 16 mm wire rope clip

Selector/hoistway door relating cable- preformed, flexible zinc-coated wire rope

Part Size Stranding Minimum Breaking Strength Cable WeightNumber inches • mm lbs • kg lbs/kft • kg/km

040219 1/16 • 1.6 7 x 7 480 • 218 7.5 • 11040218 3/32 • 2.3 7 x 7 920 • 418 16 • 24040215 1/8 • 3.2 7 x 19 2,000 • 909 29 • 43040216 5/32 • 4.0 7 x 19 2,800 • 1273 45 • 67040220 3/16 • 4.8 7 x 19 4,200 • 1909 65 • 97040225 1/4 • 6.4 7 x 19 7,000 • 3182 110 • 164

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

120

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Compensation Products ComparisonSelect the product for your needs

Part Operating speed (max) Loop width Construction WarrantySeries

Whisper-Flex® PPPPP standard PPPPP 700 ft/min 24/27 in Round / Chain Lifetime 3.56 m/sec 610/690 mm Metallic bead core / PVC sheath

Steadi-Flex® PPPPP wide PPPPP 700 ft/min 38/50 in Round / Chain Lifetime 3.56 m/sec 970/1270 mm Metallic bead core / PVC sheath

QuietLink II™ PPPP standard P 700 ft/min 24/27 in Round / Chain One year 3.56 m/sec 610/690 mm PVC sheath

EasyBalance™ PP narrow P 350 ft/min < 12.6 in Chain One year 1.75 m/sec < 320 mm PVC sheath

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

121

Whisper-Flex® Compensating Cablewith a Lifetime Warranty

US Patent 4,716,989Part Product Cable Weight Chain Trade Size Cable Nom. OD Max. Hang Length Nom. Loop WidthNumber Code lbs/ft • kg/m inches • mm inches • mm feet • meters inches • mm

18-075-97 WF 075 0.75 • 1.1 3/16 • 5.5 1.05 • 27 600 • 183 22 • 54018-010-97 WF 10 1.0 • 1.5 3/16 • 5.5 1.15 • 29 600 • 183 24 • 61018-015-97 WF 15 1.5 • 2.2 1/4 • 7 1.36 • 35 600 • 183 24 • 61018-020-97 WF 20 2.0 • 3.0 1/4 • 7 1.50 • 38 520 • 158 26 • 66018-025-97 WF 25 2.5 • 3.7 5/16 • 8 1.63 • 41 600 • 183 26 • 66018-030-97 WF 30 3.0 • 4.5 5/16 • 8 1.77 • 45 505 • 154 26 • 66018-035-97 WF 35 3.5 • 5.2 3/8 • 10 1.91 • 49 600 • 183 27 • 69018-040-97 WF 40 4.0 • 6.0 3/8 • 10 2.03 • 52 530 • 162 27 • 690

Whisper-Flex cable provides smooth operation at temperatures of -15° C to +60° C and, in the US, can be used forelevators with rated speeds of no greater than 700 ft/min • 3.56 m/sec.* Support brackets, U-bolts, S-hooks, andheavy duty stainless steel grips specifically designed for Whisper-Flex cable must be used to ensure safeinstallations. See pages 65 - 66 for details on this hardware. Draka EP dampening devices are recommended tominimize cable sway for car speeds above 350 ft/min • 1.8 m/sec. See pages 69 - 70 for information on thesedevices. This diagram shows the approximate placement of components for a Whisper-Flex cable installation.Refer to the Compensating Cable Installation Guide for exact instructions on installation procedures.

1) number of hoist ropes per car

2) outer diameter of the hoist ropes

3) stranding of the hoist ropes (i.e. 8x19, 8x25...)

4) car roping (i.e. 1:1, 2:1, other...)

5) number of Whisper-Flex cables per car

6) length of Whisper-Flex cable needed

*based on the most current code at the time of printing: ASME A17.1 - 2007, Rule 2.21.4.2 Compensating Rope Tie-Down

Stripping service 1 1/2 and31/2 links exposedPart DescriptionNumber

WFSTRIP1.5L Cable with 1-1/2 links stripped at one endWFSTRIP3L Cable with 3-1/2 links stripped at one end

Safety U-bolt

Counter-weight

Car center

CarsupportbracketS-hook

Counterweightsupport bracket

Meshgrip

Swayless (shown) or Super Swaylessdampening devices with rail and floormounting brackets

Safety loop(JCC-CHN kits

use chain)

Safety loop size is24 - 36 in • 0.6 - 1.0 meters

Loop diameterdepends on

cable diameter

Allow 3 ft • 1 meter

Cable tie

Pullout switch

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

122

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

US patent 7,610,994Part Product Cable Weight Chain Trade Size Cable Nom. OD Max. Hang Length Dynamic Loop Width†Number Code lbs/ft • kg/m inches • mm inches • mm feet • meters inches • meters

18-L15-97 SFC 15 1.5 • 2.2 1/4 • 7 1.39 • 35 600 • 183 46 • 1.1718-L20-97 SFC 20 2.0 • 3.0 1/4 • 7 1.56 • 40 520 • 158 47 • 1.2018-L25-97 SFC 25 2.5 • 3.7 5/16 • 8 1.67 • 42 600 • 183 48 • 1.2218-L30-97 SFC 30 3.0 • 4.5 5/16 • 8 1.82 • 46 505 • 154 49 • 1.2518-L35-97 SFC 35 3.5 • 5.2 3/8 • 10 1.91 • 49 600 • 183 50 • 1.2718-L40-97 SFC 40 4.0 • 6.0 3/8 • 10 2.04 • 52 530 • 162 50 • 1.27†NOTE: Dynamic loop width varies with application (ex. car speed, distance between support points). Values shown are dynamic loop dimensions; static loop widths will be up to 10” smaller.

Steadi-Flex cable is a wide-loop version of our popular Whisper-Flex cable designed especially for use on elevators with greater than 400 feet •122 m of travel or with elevators that have a side counterweight. It provides smooth operation at temperatures of -15° C to +60° C and can beused for elevators with rated speeds of no greater than 700 ft/min • 3.56 m/sec.* Support brackets, U-bolts, S-hooks and heavy duty couplingsspecifically designed for Steadi-Flex cable must be used to ensure safe installations. Installation hardware (JCC-XX-CHN) is recommended for usewith Steadi-Flex. See pages 64 - 65 for details on this hardware. Draka’s EP’s SuperSwayless dampening device is recommended for use withSteadi-Flex to minimize cable sway for car speeds above 350 ft/min (1.8 m/sec). See page 70.

Refer to the JCC-XX-CHN sections of the Compensating Cable Installation Guide for exact instructions on installation procedures.





5) number of Steadi-Flex cables per car

6) length of Steadi-Flex cable needed

If replacing existing compensation, have ready the chain link size orcable brand name and outer diameter.

*based on the most current code at the time of printing: ASME A17.1 - 2007, Rule 2.21.4.2 Compensating Rope Tie-Down

Stripping service 1 1/2 and 31/2 links exposedPart DescriptionNumber

WFSTRIP1.5L Cable with 1-1/2 links stripped at one endWFSTRIP3L Cable with 3-1/2 links stripped at one end

Safety U-bolt

Counter-weight

Car center

Car supportbracket

S-hook

Counterweightsupport bracket

SuperSwaylessmounted onSSL-FMB-48

Dymanic loop widthdepends on application

and cable size

Steadi-Flex® Compensating Cable with a Lifetime Warranty

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

123

Compensating Cable Installation HardwareInstallation kits for Whisper-Flex and Steadi-Flex

JCC installation kits for Whisper-Flex in standard pits (imperial components)Part For Use Support Bracket U-bolt S-hook Mesh grip Electrical TapeNumber on Cable Part No. Size Part No. Part No. Part No.

JCC-10 WF 075 & 10 n/a 3/8 in. 79-011 024-20-1504 16-005 JCC-15 WF 15 n/a 3/8 in. 79-013 024-20-1470 16-005 JCC-20 WF 20 n/a 3/8 in. 79-013 024-20-1510 16-005 JCC-25 WF 25 n/a 3/8 in. 79-016 024-20-1510 16-005 JCC-30 WF 30 n/a 3/8 in. 79-016 024-20-1499 16-005 JCC-35 WF 35 n/a 3/8 in. 79-016 024-20-1499 16-005 JCC-40 WF 40 n/a 3/8 in. 79-016 024-20-1542 16-005

JCC installation kits contain 2 Support Brackets (includes grade 8 nuts, bolts, lockwashers and hardenedwashers), 1 U-bolt (includes nuts and washers), 1 S-hook, a mesh grip and electrical tape.

JCCML installation kits for Whisper-Flex cables (metric components)Part For Use U-bolt S-hook Mesh grip Electrical TapeNumber on Cable Size Part No. Part No. Part No.

JCCML-10 WF 075 & 10 10 mm 79-011 024-20-1504 16-005 JCCML-15 WF 15 10 mm 79-013 024-20-1470 16-005 JCCML-20 WF 20 10 mm 79-013 024-20-1510 16-005 JCCML-25 WF 25 12 mm 79-016 024-20-1510 16-005 JCCML-30 WF 30 & 35 12 mm 79-016 024-20-1499 16-005 JCCML-40 WF 40 12 mm 79-016 024-20-1542 16-005

JCCML installation kits contain 3 U-bolts (includes nuts and washers), 1 S-hook, a mesh grip and electrical tape.

JCC-CHN installation kits for Steadi-Flex (and Whisper-Flex in shallow pits)Part For Use Support Bracket U-bolt S-hook Coupling ChainNumber on Cable Part No. Size Part No. Quantity and Size Size

JCC-10-CHN WF 075 & 10 n/a 3/8 in. 79-011 (1) 9/32 in. 5/16 in.JCC-20-CHN WF/SFC 15 & 20 n/a 3/8 in. 79-013 (1) 9/32 in. 5/16 in.JCC-30-CHN WF/SFC 25 & 30 n/a 3/8 in. 79-016 (2) 9/32 in. 3/8 in. JCC-40-CHN WF/SFC 35 & 40 n/a 3/8 in. 79-016 (1) 9/32 in., (1) 3/8 in. 3/8 in.

JCC-CHN installation kits contain 2 Support Brackets (includes grade 8 nuts, bolts, lockwashers and hardenedwashers), 1 U-bolt (includes nuts and washers) and 1 S-hook. JCC-CHN kits use 1 or 2 couplings and a 4 ft. length ofchain to form the safety/adjustment loop.

Coupling kits for shallow pitsPart For Use on Chain Size CouplingNumber Compensating Cable Quantity and Size

WF-20-CPLG WF 075/SFC 15 & 20 5/16 in. (1) 9/32 in.WF-30-CPLG WF/SFC 25 & 30 3/8 in. (2) 9/32 in.WF-40-CPLG WF/SFC 35 & 40 3/8 in. (1) 9/32 in., (1) 3/8 in.

Coupling kits consist of the chain and coupling(s) from the JCC-CHN installation kits. They DO NOT include mounting brackets, U-bolts or S-hooks.

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

124

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Compensating Cable Installation HardwareDesigned specifically for Whisper-Flex and Steadi-Flex

Stainless steel mesh grip - Double eye/double weave/closed mesh Part For use on Eye Length Nom. Mesh Length Maximum Load*Number Cables inches • mm inches • mm lbs • kg

024-20-1504 WF 075, WF 10 12.0 • 305 14.0 • 356 1200 • 545024-20-1470 WF 15 12.0 • 305 15.0 • 381 1640 • 745024-20-1510 WF 20, WF 25 12.0 • 305 17.0 • 432 1660 • 755024-20-1499 WF 30, WF 35 12.0 • 305 19.0 • 483 1800 • 818024-20-1542 WF 40 12.0 • 305 21.0 • 533 1800 • 818

Support bracket - two required - not available separatelyPart For use on Overall Size (AxBxC) Hole D Diameter Slot Size Slot Center to CenterNumber Cables inches • mm inches • mm inches • mm inches • mm

n/a WF 075, WF 10 3 x 3 x 5 • 76 x 76 x 127 3/8 • 9.5 1/2 x 7/8 • 13 x 22 2-5/8 • 66.7n/a WF/SFC 15 3 x 3 x 5 • 76 x 76 x 127 7/16 • 11 1/2 x 7/8 • 13 x 22 2-5/8 • 66.7 to WF/SFC 30n/a WF/SFC 35 3 x 3 x 5 • 76 x 76 x 127 1/2 • 13 1/2 x 7/8 • 13 x 22 2-5/8 • 66.7 to WF/SFC 40

Steel U-bolt - one required - not available separatelyPart For use on Dim. A Dim. B Dim. C Dim. T Maximum Load*Number Cables inches • mm inches • mm inches • mm inches • mm lbs • kg

n/a WF 075, WF 10 3/8 • 9.5 4-3/4 • 121 2-7/8 • 73 3 • 76 2320 • 1052 WF/SFC 15 to WF/SFC 40

Steel S-hook - one required - available for individual replacement†

Part For use on Dim. A Dim. B Dim. C Dim. D Dim. E Yield StrengthNumber Cables inches • mm inches • mm inches • mm inches • mm inches • mm lbs • kg

79-011 WF 075, WF 10 3/8 • 9.5 2-3/8 • 60 3/4 • 19 1-1/8 • 29 17/32 • 14 1200 • 54479-013 WF/SFC 15 3/8 • 9.5 2-3/4 • 70 3/4 • 19 1-1/8 • 29 1/2 • 13 2400 • 1088 to WF/SFC 2079-016 WF/SFC 25 17/32 • 13.5 3 • 76 1 • 25 1-1/8 • 29 19/32 • 15 4800 • 2177 to WF/SFC 40

Coupling - one or two required for JCC-CHN installation - see page 65Part For use on For Chain Size Dim. A Dim. B Working Load LimitNumber Cables inches • mm inches • mm inches • mm lbs • kg

79-116 WF 075 to 20 9/32 • 7 2-17/32 • 64 15/16 • 23 4300 • 195079-117 WF/SFC 25 to 40 3/8 • 10 3-7/16 • 87 2-3/8 • 60 8800 • 4000

*Maximum Load is based on minimum breaking strength with a 5:1 safety factor.†Since the S-Hook is designed to yield in order to alleviate possible damage in the event of obstruction, this item is available for replacement purposes.

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

125

Metric sizesPart Product Cable Weight Chain Trade Size Cable Nom. OD Max. Hang Length Nom. Loop WidthNumber Code kg/m (nom. ± 0.5) mm mm meters mm

16-075-97 QL075 1.12 6.0 24 160 61016-010-97 QL10 1.49 6.0 26 160 61016-012-97 QL125 1.88 7.0 31 160 61016-015-97 QL15 2.24 7.5 32 130 61016-020-97 QL20 2.98 8.5 37 160 66016-025-97 QL25 3.73 10 42 180 66016-030-97 QL30 4.47 11 44 180 66016-035-97 QL35 5.22 12 48 150 69016-040-97 QL40 5.96 13 52 150 690

QuietLink II cable provides smooth operation at temperatures of -15° C to +60°C, and can be used for elevators with rated speeds of up to 3.5 m/sec. It is similar inconstruction to Whisper-Flex only without the metallic beads in the filler/jacket.

Support brackets, U-bolts, shackles, heavy-duty stainless steel grips and/or otherdevices should be used to ensure safe installations. See page 68 for details on thishardware.

Draka EP dampening devices are recommended to minimize cable sway for carspeeds above 1.78 m/sec. See pages 69 - 70 for information on these devices.

This diagram shows the approximate placement of components for a QuietLink IIcable installation (similar to those in the Whisper-Flex Installation Guide). Refer to theWhisper-Flex Installation Guide for exact instructions on installation procedures.

Draka EP can help you determine which size of Quiet Link II cable to use. Call your regional representative and have the following information ready:





5) number of Quiet Link II cables per car

6) length of Quiet Link II cable needed

QuietLink™ II Compensating CableMetric cable and installation kits

Lift U-boltwith shackle

Counter-weight

Car center

CounterweightU-bolt

Mesh grip

Swayless (shown) orSuper SwaylessDampening Deviceswith rail and floormounting bracketsare available

Loop diameterdepends on

cable diameter

Allow 1 metre

Adjustment Loop size is0.6 - 1.0 metres

MainU-bolt

QLII Installation Kits for QuietLink II cables (metric components)Part For Use U-Bolt Shackle Mesh Grip Max. Hang LengthNumber on Cable Part No. Part No. Part No.

IQL10 QL075 & QL10 U-M6 SH-M8 XG04-001 160 mIQL15 QL125 & QL15 U-M8 SH-M10 XG04-002 130 mIQL20 QL20 U-M10 SH-M10 XG04-002 160 mIQL30 QL25 & 30 U-M12 SH-M12 XG04-003 180 mIQL40 QL35 & 40 U-M14 SH-M14 XG04-004 150 m

THESE COMPONENTS ARE SPECIFICALLY DESIGNED FOR THE INSTALLATION OF METRIC COMPENSATING CABLES.

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

126

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Easy-Balance™ chain Part Product Chain Weight Chain Trade Size Chain Nom. OD Max. Hang Length Nom. Loop WidthNumber Code kg/m (nom. ± 0.5) mm mm meters mm

17-050-97 EB050 0.88 6.0 21 180 28017-075-97 EB075 1.12 7.0 26 180 28017-010-97 EB10 1.49 8.0 29 180 30017-125-97 EB125 1.88 9.0 32 180 30017-015-97 EB15 2.24 10 36 180 30017-020-97 EB20 2.98 11 39 180 30017-025-97 EB25 3.73 13 46 180 30017-030-97 EB30 4.47 14 50 180 32017-035-97 EB35 5.22 15 53 180 320 17-040-97 EB40 5.96 16 56 180 320

Easy-Balance chain provides quiet operation at temperatures of -15° C to +60° C, and can be used for elevatorswith rated speeds of up to 1.75 m/sec. Low carbon chain is coated with a flexible layer of PVC for quiet operation.

No shallow pit kits or special hardware (other than the recommended U-bolts - see page 68) are required with Easy-Balance compensation chain. Dampening devices are not needed.

IEB installation kits for chain compensationPart For Use on For Use on For Use on U-BoltNumber Easy-Balance Chain with Intertwined Rope PVC-Coated Chain Part No.

IEB050 EB050 WFC/G-6 WF-BS06 U-M6IEB075 EB075 WFC/G-7 WF-BS07 U-M8IEB125 EB10, EB125 WFC/G-8 & 9 WF-BS08 & 09 U-M10IEB20 EB15, EB20 WFC/G-10, 11 & 12 WF-BS010 & WF-BS011 U-M12IEB40 EB25, EB30, EB35, EB40 WFC/G-14, 15 & 16 WF-BS014 U-M14

IEB installation kits contain 2 U-bolts (includes nuts and washers).

Easy-Balance™ Compensating ChainMetric cable and installation kits

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

127

Steel U-bolt - with nuts, lock washers and cotter pins

Part For use on Dim. A Dim. B Dim. C Dim. T Pin Diameter Min. BreakingNumber Cables mm mm mm mm mm Strength (kN)

U-M6 EB050 6.0 120 50 75 1.6 13.818U-M8 EB075 8.0 120 50 75 2.0 22.246U-M10 EB10, EB125 10 120 50 75 3.2 36.701U-M12 EB15, EB20 12 120 50 75 4.0 57.183U-M14 EB25, EB30, EB35, EB40 14 120 50 75 4.0 74.725

Steel shackle for QuietLink II - not available separatelyPart For use on Bolt Size Pin Dim. L1 Dim. L2 Dim. A Dim. B Min. BreakingNumber Cables mm mm mm mm mm mm Strength (kN)

SH-M8 QL075, QL10, QL125 M8 x 45 2.0 x 20 12.5 28.5 12 23 22.246SH-M10 QL15, QL20 M10 x 50 2.5 x 20 12.5 28.5 12 23 36.701SH-M12 QL25, QL30 M12 x 50 3.2 x 20 12.5 28.5 12 23 57.183SH-M14 QL35, QL40 M14 x 60 3.2 x 20 18.0 36.0 16 27 74.725

Stainless steel grips - double eye/double weave/closed meshPart For use on Nom. Overall Length Min. Breaking StrengthNumber Cables mm kN

XG04-001 QL075 & 10 710 16XG04-002 QL15 & 20 710 37XG04-003 QL25 & 30 710 45XG04-004 QL35 & 40 710 63

THESE COMPONENTS ARE SPECIFICALLY DESIGNED FOR THE INSTALLATION OF METRIC COMPENSATING CABLES.

Metric Compensating Cable/Chain Hardware Designed specifically for QuietLink II and Easy-Balance

L1

A

L2B

AB

C

T

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

128

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Compensating Cable AccessoriesSwayless® dampening device for speeds up to 500 ft/min • 2.54 m/sec

US patent 6,234,277, Euro patent 1,177,150 - two required per installation -mounting brackets sold separately

Part Overall Dimensions Center opening QuantityNumber

WF-SRD 6-1/4 x 3-15/16 x 2-3/4 in. 2-3/4 in. 2WF-SRD-1 6-1/4 x 3-15/16 x 2-3/4 in. 2-3/4 in. 1WF-SRD-M* 158 x 100 x 70 mm 70 mm 2WF-SRD-BR brass ring replacement 2-3/4 in. • 70 mm 1

*NOTE: Metric version uses metric nuts and bolts for closure and attachment.

WF-SRD Swayless dampening devices are recommended for maintaining smooth operationof Whisper-Flex compensating cables for speeds of up to 500 feet/min • 2.54 m/sec.

The purpose of the WF-SRD is to dampen any oscillation or cable sway that may begenerated by cable motion at higher speeds. The dampening device is not usually requiredbut can be used for speeds less than 350 feet/min • 1.78 m/sec. Proper installation requiresthat compensating cable should not contact the ring of the dampening device when thecable is stationary. Cable must be centered within the holes.

As the car and counterweight move, the dampening device keeps the compensating cable inposition for optimum operation.

The WF-SRD can be used for Whisper-Flex sizes WF075 to WF30 and QuietLink II sizesQL075 to QL30. Draka EP offers mounting brackets for easy installation in the elevator pit.Consult the Compensating Cable Installation Guide for the installation of dampening devices.

For shallow pits not allowing three feet height above cable loop, please call Draka EP for engineering assistance.

Swayless® mounting bracketsPart DescriptionNumber

SL-FMB-48 (2) floor-mounted brackets, adjustable to 48 in. • 1.2 m heightSL-FMB-2 (2) floor-mounted brackets, adjustable to 48 in. • 1.2 m height, includes (2) Swayless devicesSL-RMB-60 Counterweight rail-mounted bracket, adjustable to 60 in. • 1.5 m WSL-RMB-2 Counterweight rail-mounted bracket, adjustable to 60 in. • 1.5 m width, includes (2) Swayless devices

These brackets are especially designed to help you to quickly and easily installSwayless devices off the counterweight guide rails and off the pit floor. They comewith all the necessary hardware, including nuts and bolts.

SL-FMB-48FLOOR MOUNTED BRACKETS(SWAYLESS DEVICES ARE NOT INCLUDED)

SL-RMB-2RAIL-MOUNTED BRACKETINCLUDES SWAYLESS DEVICES

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

129

Compensating Cable AccessoriesSuper Swayless® dampening device for speeds up to 700 ft/min • 3.56 m/sec

Two required per installation - mounting brackets sold separately

Part Overall Dimensions Mounting Hole Dia. QuantityNumber inches • mm inches • mm

WF-RDD2 8 x 8 x 3.1 • 203 x 203 x 79 1/2 • 13 1WF-RDD2-S 8 x 8 x 3.1 • 203 x 203 x 79 1/2 • 13 1

WF-RDD2 Super Swayless dampening devices have an improved design and arerecommended for maintaining smooth operation of compensating cables for speeds of up to700 feet/min • 3.56 m/sec.

The WF-RDD2 uses free-turning nylon rollers to contain and dampen any oscillation or cablesway that may be generated by cable motion at higher speeds. It can be used for all sizes ofWhisper-Flex and QuietLink II compensating cables.

The WF-RDD2-S is the same construction, but designed especially for use on the wider-loopSteadi-Flex cables.

Super Swayless® mounting bracketsPart DescriptionNumber

SSL-FMB-48 (2) floor-mounted brackets, adjustable to 48 in. • 1.2 m height, order WF-RDD2 separatelySSL-RMB-72 Counterweight rail-mounted bracket, adjustable to 72 in. • 1.8 m width, order WF-RDD2 separatelySSL-RMB-2 Counterweight rail-mounted bracket, adjustable to 72 in. • 1.8 m width, includes (2) Super Swayless devices (for use only on Whisper-Flex)

These brackets are especially designed to help you to quickly and easily install SuperSwayless devices off the counterweight guide rails and off the pit floor. They come with allthe necessary hardware, including nuts and bolts.

SSL-FMB-48FLOOR-MOUNTED BRACKETS(SUPER SWAYLESS DEVICES ARE NOT INCLUDED)

SSL-RMB-2RAIL-MOUNTED BRACKETINCLUDES SUPER SWAYLESS DEVICES

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

130

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Patent pendingPart DescriptionNumber

WFDD-27L ShallowSwayless kit, for Whisper-Flex cable with maximum loop of 27 inchesWFDD-50L ShallowSwayless kit, for Steadi-Flex cable with maximum loop of 50 inches

The ShallowSwayless is a sway reduction device for shallow pit applications where there isinsufficient pit depth for Swayless or SuperSwayless devices. It reduces compensatingcable sway and oscillation in installations up to 700 ft/min • 3.56 m/sec. Two sizes areavailable; the 27L version is for Whisper-Flex and the 50L version is for Steadi-Flex.

NOTE: The ShallowSwayless is ONLY for shallow pit applications.

The kit includes all components shown, including mounting bolts and washers.

Pullout switch and kitPart Description QuantityNumber

36-207 Pullout switch, with flat key actuator and rotating head 1WF-POSK Pullout switch installation kit, which includes 1 one pullout switch (#36-207), two split O-rings, two cable ties, two 4 x 40 mm pan-head screws, two 4 mm hex nuts, four 4 mm flat washers and two 4 mm lock washers.

The pullout switch is UL and C-UL listed and conforms to EN1088, EN292, EN60947-5-1,EN60204-1 and EN50047. The switch enclosure meets NEMA 6.

Compensating Cable Accessories ShallowSwayless® for speeds up to 700 ft/min • 3.56 m/sec

32”

10.8”

32.25”

INSTALLEDPULLOUTSWITCH

WFDD-27L

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

131

Load Weighing Devices by MicelectCE conforming, cCSAus certified

ILC3 load weighing device - mounts on hoist ropes above carPart DescriptionNumber

LW-ILC3-M-STD Load weighing device with three relay outputs and cable connection, for 1:1 roping (13,200 lbs • 6000 kg capacity)*, automatic calibration - no test weights required, accurate to within 0.5%. 24 - 48VDC power, 250V 3A relay contacts Select spacers, clamp (below) and optional cab display (see page 74) LW-ILC3-M-ANLOG Load weighing device, like above but with 0-20, 4-20 or 0-24 mA analog output

LMC load weighing device - mounts on hoist ropes in overheadPart DescriptionNumber

LW-LMC Load weighing device (sensor only), for 2:1 (17,600 lbs • 8000 kg capacity)* or 4:1 roping (35,200 lbs • 16000 kg capacity)*, automatic calibration - no test weights required, accurate to within 0.5%. Select control unit, spacers, clamp (below) and optional cab display (see page 74)LM3D-EMC-CSA Control unit for LMC with three relay outputs and one 0-20, 4-20 or 0-24 mA analog outputLM3D-EMC-CSA-5V Control unit for LMC with three relay outputs and one voltage (not current) analog output

Clamps and spacers - for ILC3 and LMC load weighing devicesPart Description Number

LW-ILC3-CLAMP-2 ILC3 size 2 clamp, 3 to 4-3/8 in. • 76 to 115 mm of rope spread, two LW-SPACER required LW-ILC3-CLAMP-3 ILC3 size 3 clamp, 4-1/2 to 6-1/4 in. • 116 to 160 mm of rope spread, two LW-SPACER requiredLW-ILC3-CLAMP-4 ILC3 size 4 clamp, 6-3/8 to 7-3/8 in. • 161 to 188 mm of rope spread, two LW-SPACER requiredLW-ILC3-CLAMP-5 ILC3 size 5 clamp, 7-1/2 to 10-1/4 in. • 189 to 263 mm of rope spread, four LW-SPACER requiredLW-ILC3-CLAMP-6 ILC3 size 6 clamp, 10-3/8 to 12-1/2 in. • 264 to 318 mm of rope spread, four LW-SPACER required

LW-LMC-CLAMP-3 LMC size 3 clamp, 3 to 4-3/8 in. • 76 to 115 mm of rope spread, two LW-SPACER required LW-LMC-CLAMP-4 LMC size 4 clamp, 4-1/2 to 6-1/4 in. • 116 to 160 mm of rope spread, two LW-SPACER requiredLW-LMC-CLAMP-5 LMC size 5 clamp, 6-3/8 to 7-3/8 in. • 161 to 188 mm of rope spread, four LW-SPACER requiredLW-LMC-CLAMP-6 LMC size 6 clamp, 7-1/2 to 8-1/2 in. • 189 to 226 mm of rope spread, four LW-SPACER requiredLW-LMC-CLAMP-7 LMC size 7 clamp, 8-5/8 to 10-3/8 in. • 227 to 263 mm of rope spread) four LW-SPACER required

LW-SPACER-38 Spacer for ILC3 and LMC, 3/8 in. • 10 mm, two required for clamp sizes 2, 3 and 4, four for clamp sizes 5, 6 and 7LW-SPACER-12 Spacer for ILC3 and LMC, 1/2 in. • 13 mm, two required for clamp sizes 2, 3 and 4, four for clamp sizes 5, 6 and 7LW-SPACER-58 Spacer for ILC3 and LMC, 5/8 in. • 16 mm, two required for clamp sizes 2, 3 and 4, four for clamp sizes 5, 6 and 7LW-SPACER-1116 Spacer for ILC3 and LMC, 11/16 in. • 17.5 mm, two required for clamp sizes 2, 3 and 4, four for clamp sizes 5, 6 and 7LW-SPACER-34 Spacer for ILC3 and LMC, 3/4 in. • 19 mm, two required for clamp sizes 2, 3 and 4, four for clamp sizes 5, 6 and 7

*Call if your cab weight + capacity is more

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

132

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N


WR load weighing device - mounts on individual ropes above carPart Description Number

LW-WR-SENSOR-38 WR load weighing device, for individual 10 mm • 3/8 in. ropes (sensor only) - control unit required - see below. The WR attaches to individual ropes, operating capacity of 1200 kg • 2645 lbs per rope. Features automatic calibration - no test weights required. Up to eight WR sensors can be wired into a single LM3D-EMC-CSA control unit. LW-WR-SENSOR-12 WR load weighing device, for individual 13 mm • 1/2 in. ropes (sensor only) - LM3D-EMC-CSA control unit required - see below. Like above except for 13 mm • 1/2 in. ropes.LW-WR-SENSOR-58 WR load weighing device, for individual 16 mm • 5/8 in. ropes (sensor only) - LM3D-EMC-CSA control unit required - see below. Like above except for 16 mm • 5/8 in. ropes.

LM3D-EMC-CSA Control unit for LW with three relay outputs and one 0-20, 4-20 or 0-24 mA analog output NOTE: also used with LW-CAB-SENSOR on page 74LM3D-EMC-CSA-5V Control unit for LW with three relay outputs and one voltage analog output

LW-CONN-BOX WR connection box, used with the LM3D-EMC-CSA control unit, provides a clean and protected connection for cablingLW-CABLE-CSA CSA cable for WR connection box, connects LW-CONN-BOX to LM3D-EMC-CSA

954.971.1115 / fax 954.917.7337 800.526.0026

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

133

www.SEESinc.com


WR load weighing device with USB output - mounts on individual ropes above carPart Description Number

LW-MWR-SE-38-USB WR load weighing device, for individual 10 mm • 3/8 in. ropes (sensor only) with USB connector - LW-MWR-ANLOG-8 control unit required - see below. LW-MWR-SE-12-USB WR load weighing device, for individual 13 mm• 1/2 in. ropes (sensor only) with USB connector - LW-MWR-ANLOG-8 control unit required - see below. LW-MWR-SE-58-USB WR load weighing device, for individual 16 mm • 5/8 in. ropes (sensor only) with USB connector - LW-MWR-ANLOG-8 control unit required - see below. LW-MWR-ANLOG-8 Control unit for WR load weighing devices, with USB connectors - 0-20, 4-20 or 0-24 mA analog output Use ONLY with LW-MWR-SE-38-USB, LW-MWR-SE-12-USB and LW-MWR-SE-58-USB

Under cab sensor - mounts under cabPart Description Number

LW-CAB-SENSOR Under cab sensor, sold in multiples of 2 (4 to 16 may be used), features automatic calibration - no test weights required. NOTE: LM3D-EMC-CSA control unit required (see page 73)

Cab displays - for all load weighing devices except portable devicesPart Description Number

LW-CABDISPLA-ML Cab display, overload shown by flashing and intermittent buzzing

LW-CABDISPLA-LPM Cab display, load shown by progressively lit LEDs, overload by flashing and intermittent buzzing NOTE: cannot be used with LM-ILC3-M-ANLOG

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

134

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N


Beam sensor - mounts on elevator cross beam


023-4-0001 Cross beam-mounted load weighing device, mounts on beam frames, with 6.5 ft • 2 meter cord and all necessary mounting hardware, 0-20, 4-20 or 0-24 mA analog output

USE ONE SENSOR when the cab capacity is 2200 lbs • 1000 kg or less, AND when the cross beams are fixed to the same vertical beam, AND when the cab is situated symmetrically within the car sling.

USE TWO SENSORS when the cab capacity exceeds 2200 lbs • 1000 kg, OR when the depth of the cab is 1.4x the cab’s width, OR when the cab is NOT situated symmetrically within the car sling.

NOTES: LM3D-EMC-CSA control unit required (see page 73). Test weights required for calibration.

Belt sensor - attaches to traction beltsPart Description Number

023-4-0003 Belt sensor, for individual 1/8 in. • 3 mm belts (sensor only), attaches to individual belts, operating capacity 2645 lbs • 1200 kg per belt. Up to eight belt sensors can be wired into a single LM3D-EMC-CSA control unit (see page 73) NOTE: Test weights required for calibration - automatic calibration feature is pending.

023-4-0004 Belt sensor, for individual 3/16 in. • 4.6 mm belts (sensor only), attaches to individual belts, operating capacity 2645 lbs • 1200 kg per belt. Up to eight belt sensors can be wired into a single LM3D-EMC-CSA control unit (see page 73) NOTE: Test weights required for calibration - automatic calibration feature is pending.

Portable load weighing device - to weigh car and counterweightPart Description Number

LW-MW1-8800LBS Portable weighing unit, (8,800 lbs • 4,000 kg capacity) for measurement of elevator car and counterweight)

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

135

Seismic Components

S-Box™ seismic sensorPart Description Number

SEISMIC SENSOR Seismic sensor, with LCD interface and meter function, contacts can switch up to 5A @ 240VAC, uses 110 - 240VAC 50-60 Hz powerSEISMIC-BATTERY Replacement battery for seismic sensor

The Draka S-Box seismic sensor is a user-friendly system that detects and records vertical andhorizontal seismic ground movements.

The system stores the peak acceleration (measured in Gs) in each axis for up to 15 seismic eventsand displays it on the easy-to-understand LCD interface.

Alarm levels are preset to meet elevator safety code or can be user-defined. Latching contactscan be remotely reset.

The unit also functions as a meter that displays real-time acceleration and angle of deflection. Itmeets or exceeds ASCE 25-97, ASME 17.1/17.5, CSA B44.1 and is cULus listed.

Counterweight displacement kit - ring on a stringPart Description Number

CDH-R8 Counterweight displacement kit,mounts to 8 lb. guide rails (order cable [CDH-L500, CDH-L1000 or CDH-L1500] separately)CDH-R12 Counterweight displacement kit, mounts to 12 and 16 lb. guide rails (order cable [CDH-L500, CDH-L1000 or CDH-L1500] separately)CDH-L500 Cable, 500 ft • 152 m length, 1/16 in. • 1.6 mm diameter, with thimbles and clips (use for up to 250 ft. • 71 m of rise)CDH-L1000 Cable, 1000 ft • 304 m length, 1/16 in. • 1.6 mm diameter, with thimbles and clips (use for up to 500 ft. • 152 m of rise)CDH-L1500 Cable, 1500 ft • 456 m length, 1/16 in. • 1.6 mm diameter, with thimbles and clips (use for up to 750 ft • 223 m of rise)040219 Cable, cut to length, does not include attachment hardware, please specify length79-103 Thimble, for 1/16 in. • 1.6 mm cable attachment (replacement part)79-104 Wire rope clip, for 1/16 in. • 1.6 mm cable attachment (replacement part)36-178 Wire cutters, for cutting steel cable

The Counterweight Displacement Kit is an easily installed “ring on a string” hardware kit that, when used inconjunction with a relay circuit (not included), can signal the controller if a counterweight has been displaceddue to a seismic event.

Two steel cables run parallel to the counterweight guide rails and pass through a pair of eyebolts located onthe counterweight. If an eyebolt contacts a cable (which indicates a counterweight displacement), the circuitis completed and the controller stops and redirects the car immediately.

Order one kit and one cable per elevator - the kit attaches to BOTH counterweight rails (as shown). Notethat the kit is specified for the rail size and the cable ordered should be at least twice the rise of theelevator - the cable will be cut and installed on both rails.

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

136

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Hardware for Rail Mounting

Rail brackets - order two rail clips per bracketPart Description Adjustable RangeNumber Distance from Wall

9743A-1 Small (1/4 in.) rail bracket assembly, with rail clips 2-1/4 to 3-1/4 in.9743A-2 Small (1/4 in.) rail bracket assembly, with rail clips 3 to 4-3/4 in.9750A-1 Small (1/4 in.) rail bracket assembly, without rail clips 2-1/4 to 3-1/4 in.9750A-2 Small (1/4 in.) rail bracket assembly, without rail clips 3 to 4-3/4 in.9745A-1 Large (5/16 in.) rail bracket assembly, with rail clips 4 to 6-3/4 in.9745A-2 Large (5/16 in.) rail bracket assembly, with rail clips 5-3/4 to 8-1/8 in.9745A-3 Large (5/16 in.) rail bracket assembly, with rail clips 7-1/2 to 10-1/4 in.9749A-1 Large (5/16 in.) rail bracket assembly, without rail clips 4 to 6-3/4 in.9749A-2 Large (5/16 in.) rail bracket assembly, without rail clips 5-3/4 to 8-1/8 in.9749A-3 Large (5/16 in.) rail bracket assembly, without rail clips 7-1/2 to 10-1/4 in.

Rail brackets with rail clips also include locking plates for seismic areas.Rail brackets without rail clips do not include rail clip fasteners. Neither bracket includes wall fasteners.Assemblies with rail clips for 8 lb. rail are a special order and include a correctly-sized locking plate.12 and 15 lb. brackets use 5/8 in. fasteners. 8 lb. brackets use 1/2 in. fasteners.

Rail clipsPart Description Number

55-012 Forged rail clip, for 8 lb. rail55-013 Forged rail clip, for 12 lb. rail55-014 Forged rail clip, for 15 lb. rail

Rail bracket shimsPart Size Thickness Cutout(s) Number

55-020 8 x 2 in. .030 in. 11/16 in.55-021 8 x 2 in. .060 in. 11/16 in.55-022 8 x 2 in. .105 in. 11/16 in.55-023 9-3/8 x 2 in. .030 in. 13/16 in.55-024 9-3/8 x 2 in. .060 in. 13/16 in.55-025 9-3/8 x 2 in. .105 in. 13/16 in.55-026 3 x 2 in. .015 in. 13/16 in.

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

137

Hardware for Rail Mounting

Concrete/masonry inserts - designed to ASTM 17.1Part Description Seismic PulloutNumber zones force

INSERT-12 Insert, 12 in. long 0 and 1 2500 lbsINSERT-18 Insert, 18 in. long 0 and 1 4000 lbsINSERT-24 Insert, 24 in. long 0 and 1 4000 lbsINSERT-30 Insert, 30 in. long 0 and 1 4000 lbsINSERT-36 Insert, 36 in. long 0 and 1 4000 lbsINSERT-48 Insert, 48 in. long 0 and 1 4000 lbs

Minimum concrete/grout strength strength is 2,000 lbs using two 1/2 thru3/4” spring nuts. Design strength 4” min. edge distance.NOTE: The structural engineer will determine the necessarysafety factor from the building codes per job.

Heavy duty inserts - designed to ASTM 17.1Part Description Seismic PulloutNumber zones force

INSERT-HD-12 Insert, 12 in. long 2 to 4 4900 lbsINSERT-HD-18 Insert, 18 in. long 2 to 4 7400 lbsINSERT-HD-24 Insert, 24 in. long 2 to 4 7400 lbsINSERT-HD-30 Insert, 30 in. long 2 to 4 7400 lbsINSERT-HD-36 Insert, 36 in. long 2 to 4 7400 lbsINSERT-HD-48 Insert, 48 in. long 2 to 4 7400 lbs

Minimum concrete/grout strength strength is 2,000 lbs using two 1/2 thru3/4” spring nuts. Design strength 4” min. edge distance.NOTE: The structural engineer will determine the necessary safetyfactor from the building codes per job.

Insert spring nuts

Part Description Number

INSERT-NUT-12 Spring nut, 1/2 in. INSERT-NUT-58 Spring nut, 5/8 in. INSERT-NUT-34 Spring nut, 3/4 in.

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

138

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Elbows and fittingsPart Description/Size Compare toNumber Victaulic®

GRN-21020S 90° elbow, 2 in. 10GRN-21025S 90° elbow, 2-1/2 in. 10GRN-21030S 90° elbow, 3 in. 10GRN-21040S 90° elbow, 4 in. 10

GRN-20120S 45° elbow, 2 in. 11GRN-20125S 45° elbow, 2-1/2 in. 11GRN-20130S 45° elbow, 3 in. 11GRN-20140S 45° elbow, 4 in. 11

GRN-31220S 22.5° elbow, 2 in. 12GRN-31225S 22.5° elbow, 2-1/2 in. 12GRN-31230S 22.5° elbow, 3 in. 12GRN-31240S 22.5° elbow, 4 in. 12

GRN-31320S 11.25° elbow, 2 in. 13GRN-31325S 11.25° elbow, 2-1/2 in. 13GRN-31330S 11.25° elbow, 3 in. 13GRN-31340S 11.25° elbow, 4 in. 13

GRN-21920S Tee, 2 in. 20GRN-21925S Tee, 2-1/2 in. 20GRN-21930S Tee, 3 in. 20GRN-21940S Tee, 4 in. 20

GRN-26020S End cap, 2 in. 60GRN-26025S End cap, 2-1/2 in. 60GRN-26030S End cap, 3 in. 60GRN-26040S End cap, 4 in. 60

GRN-72858 Reducer, 2-1/2 to 2 in. 50GRN-72863 Reducer, 3 to 2 in. 50GRN-72865 Reducer, 3 to 2-1/2 in. 50GRN-72870 Reducer, 4 to 2 in. 50GRN-72872 Reducer, 4 to 2-1/2 in. 50GRN-72873 Reducer, 4 to 3 in. 50

GRN-S85320 Y strainer, 2 in. 32GRN-S85325 Y strainer, 2-1/2 in. 32GRN-S85330 Y strainer, 3 in. 32GRN-S85340 Y strainer, 4 in. 32

GRN-20NITRILS Nitrile gasket, 2 in. n/aGRN-25NITRILS Nitrile gasket, 2-1/2 in. n/aGRN-30NITRILS Nitrile gasket, 3 in. n/aGRN-40NITRILS Nitrile gasket, 4 in. n/a

Hydraulic Ball Valves and Pipe Fittingsby Grinnell

Grooved ball valvesPart Description/Size Compare toNumber Victaulic®

GRN-GBLV020 Ball valve, 2 in. 726GRN-GBLV025 Ball valve, 2-1/2 in. 726GRN-GBLV030 Ball valve, 3 in. 726GRN-GBLV040 Ball valve, 4 in. 726

Threaded ball valvesPart Description/Size Number

TBLV-020 Threaded ball valve, 2 in. n/aTBLV-025 Threaded ball valve, 2-1/2 in. n/aTBLV-030 Threaded ball valve, 3 in. n/aTBLV-040 Threaded ball valve, 4 in. n/a

Flexible couplings Part Description/Size Compare toNumber Victaulic®

GRN-70720TS Flexible coupling, 2 in. 77GRN-70725TS Flexible coupling, 2-1/2 in. 77GRN-70730TS Flexible coupling, 3 in. 77GRN-70740TS Flexible coupling, 4 in. 77

Rigid couplings Part Description/Size Compare toNumber Victaulic®

GRN-77020TS Rigid coupling, 2 in. HP-70GRN-77025TS Rigid coupling, 2-1/2 in. HP-70GRN-77030TS Rigid coupling, 3 in. HP-70GRN-77040TS Rigid coupling, 4 in. HP-70

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

139

Hydraulic Accessories by EECO as notedIsolation couplings, mufflers, rupture valves and cushion clamps

Isolation couplings by EECOPart Description SizeNumber

2060A-1 Grooved to grooved coupling 2 in.2060A-2 Grooved to National Pipe Thread (NPT) coupling 2 in.2060A-3 NPT to NPT coupling 2 in.2070A-1 Grooved to grooved coupling 2-1/2 in.2070A-2 Grooved to NPT coupling 2-1/2 in.2070A-3 NPT to NPT coupling 2-1/2 in.2080A-1 Grooved to grooved coupling 3 in.2080A-2 Grooved to NPT coupling 3 in.2080A-3 NPT to NPT coupling 3 in.

Mufflers by EECOPart Description Size/ThroughputNumber

MU-2000-1 Muffler, 2 in. GRV to 2 in. GRV 6-5/8 in. OD, 11-3/4 in. long / 185 GPM max.MU-2000-2 Muffler, 2 in. GRV to 2 in. NPT 6-5/8 in. OD, 11-3/4 in. long / 185 GPM max.MU-2000-4 Muffler, 2 in. NPT to 2 in. NPT 6-5/8 in. OD, 11-3/4 in. long / 185 GPM max.MU-2500-1 Muffler, 2-1/2 in. GRV to 2-1/2 in. GRV 8-5/8 in. OD, 11-3/4 in. long / 260 GPM max.MU-2500-2 Muffler, 2-1/2 in. GRV to 2-1/2 in. NPT 8-5/8 in. OD, 11-3/4 in. long / 260 GPM max.MU-2500-4 Muffler, 2-1/2 in. NPT to 2-1/2 in. NPT 8-5/8 in. OD, 11-3/4 in. long / 260 GPM max.MU-2500-5 Muffler, 2-1/2 in. NPT to 3 in. GRV 8-5/8 in. OD, 11-3/4 in. long / 260 GPM max.MU-2500-6 Muffler, 2-1/2 in. GRV to 3 in. GRV 8-5/8 in. OD, 11-3/4 in. long / 260 GPM max.MU-3000-1 Muffler, 3 in. GRV to 3 in. GRV 8-5/8 in. OD, 11-3/4 in. long / 350 GPM max.MU-3000-2 Muffler, 3 in. GRV to 3 in. NPT 8-5/8 in. OD, 11-3/4 in. long / 350 GPM max.MU-3000-3 Muffler, 3 in. NPT to 3 in. NPT 8-5/8 in. OD, 11-3/4 in. long / 350 GPM max.

Rupture valves Part Description Flow Rate/Max. PressureNumber

PRV-2-NPT Pipe rupture valve, 2 in. - NPT 111 to 208 GPM / 1200 PSIPRV-2-GRV Pipe rupture valve, 2 in. - Grooved 111 to 208 GPM / 1200 PSIPRV-25-NPT Pipe rupture valve, 2-1/2 in. - NPT 209 to 318 GPM / 1000 PSIPRV-25-GRV Pipe rupture valve, 2-1/2 in. - Grooved 209 to 318 GPM / 1000 PSIPRV-3-NPT Pipe rupture valve, 3 in. - NPT 319 to 546 GPM / 800 PSIPRV-3-GRV Pipe rupture valve, 3 in. - Grooved 319 to 546 GPM / 800 PSI

Cushion clamps for hydraulic pipePart Description PipeNumber Trade Size

FS-1400P-200 Cushion clamp 2FS-1400P-250 Cushion clamp 2-1/2FS-1400P-300 Cushion clamp 3 FS-1400P-400 Cushion clamp 4

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

140

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Hydraulic Accessories by MEI and Micelect as notedOil cooler, silencers, pressure sensors and pipe stands

Oil cooler by Minnesota Elevatorcomponents CSA certified


MEI-10248 Oil cooler, with filter

The MEI Oil Cooler reducesthe oil temperature by nearly40° F • 22° C, (depending onsite conditions). The cooleralso filters the oil whichresults in smoother stops andstarts, improved levelling andextended component life. Theoil cooler can be mounteddirectly or remotely. NOTE:Remote installations shouldnot exceed 110 ft • 33.5 mhorizontal or 55 ft • 17.5 mvertical from tank.

Silencer by Minnesota Elevator


MEI-19317 Silencer, 220 max. GPM, fits 2 x 2 in. grooved coupling 13-1/4 L x 4-5/8 in. O.D., 28 lbs., rated to 1000 PSIMEI-19319 Silencer, 360 max. GPM, fits 2-1/2 x 3 in. grooved coupling, 13-1/4 L x 4-5/8 in. O.D., 28 lbs., rated to 1000 PSI

The MEI Silencer uses abladder system with airpressure to reduceexcessive noise that maybe generated by ahydraulic system.

Hydraulic pressure sensor by MicelectcCSAus certified


LW-SPB-M-NPT-STD Hydraulic pressure sensor, with 2 relay

outputs, includes 1/4 in. NPT female fitting,

automatic calibration - no test weights

required, 24 - 48VAC, 2 relays, 250V@3A

LW-SPB-M-NPT-020 Hydraulic pressure sensor, like above but with 0-20 mA analog output

The Micelect LW-SPB hydraulic pressure sensors mount to thehydraulic power unit. Pressure measurements are convertedinto outputs. Actual pressure can be displayed as well. NOTE:roller guides are required at least on top or on bottom of cab.

The LW-SPB sensors arecompatible with cabdisplays shown on thebottom of page 75.

Pipe stands - adjustable to 22” height

Part Description PipeNumber Trade Size

PIPE22-15 Pipe stand 1-1/2PIPE22-2 Pipe stand 2PIPE22-25 Pipe stand 2-1/2PIPE22-3 Pipe stand 3

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

141

Hydraulic Accessories by Minnesota ElevatorPully Bully and submersible power unit

Pully Bully lift/puller for submersible pumps/motorsPart DescriptionNumber

MEI-17936 Pully Bully, submersible pump/motor puller with drip pan/workbench and dolly

Draka Elevator Products offers the MEI Pully Bully, a safe and economical methodthat saves you time and frustration when servicing submersible pumps/motors.

The Pully Bully rolls easily into the machine room. The hoisting frame detachesfrom the cart which serves as a workbench/drip pan that collects the excess oil.

Use the chain hoist to rig and pull the pump/motor out of the power unit, then setthe pump/motor on the cart/drip pan and make the necessary repairs. It islightweight, yet complies with ASME B30.17 - 1998.

Submersible power unit

Minnesota Elevator submersible hydraulic power units are now available through Draka EP.These power units are available with several options such as silencer, tank heater, lowpressure switch and more. These units are competitively priced, quiet, compact and availablewith very short lead times.

Specifying, quoting and ordering submersible power units is made easy with the online‘Configurator:’

Go to http://www.draka-ep.com;

Locate the “Partners” link on the gray bar at the top of the page.

Click on “Approved Partners” on the drop down menu;

On the Approved Partners page, scroll down to MEI and click on the MEI logo.

You may now register online for Configurator access.

Pully Bully in use

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

142

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Roll Groovers and Accessories by Pace MachineryManual and powered

1039 Mini-Mite™ manual roll grooverPart Compare to DescriptionNumber Victaulic®

GRN-1039 VE-26S Roll groover with hand-crank, including depth gauges

The Pace 1039 Mini-Mite™ Roll Groover is designed for use on 1-1/4 in. to 6 in. Schedule 40 pipe.

The Mini-Mite is self-contained and can be operated with its own multi-function crank or quicklychucked to a Ridgid Model 300 without removing the gearbox. All hex drives on the Mini-Mite are 15/16in., so one wrench fits everything. A multi-step depth gauge is included.

1041 roll grooverPart Compare to DescriptionNumber Victaulic®

GRN-1041 VE-226M Roll groover, for use with drives, includes depth gauges

The Pace 1041 Roll Groover is light, portable and easily mounts to a wide range of popular power3/8 in. square ratchet drives, including the Victaulic® VPD752, Ridgid® 300/535/1224/1822 and Oster® 310 power drives (not included). Trial grooving depth is easily set with the supplied multi-step feeler gauges. An integral overload device guards against undue load being applied through the ratchet.

Pipe support standPart DescriptionNumber

GRN-4031 Pipe support stand, for 1 to 4 in. dia.

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

143

ToolsJacket strippers

Flexi-Peeler™ round cable stripperPart Description Number

36-060 Flexi-Peeler, for cable dia. 0.2 to 1.5 in. • 4.5 to 40 mm, one replacement blade included36-061 Replacement blade

The Flexi-Peeler precisely cuts a jacket with rotary, straight lengthwise and spiral cuts. Twoquickly switched hooks permit its use on cables from 0.2 in. • 4.5 mm to 1.5 in. • 40 mm indiameter. Cut depth is adjustable. A replacement blade is included in the handle.

Super Peeler round cable stripperPart DescriptionNumber

36-146 Super Peeler, for cable dia. 3/4 to 1-1/4 in. • 19 to 32 mm36-147 Super Peeler, for cable dia. 1-1/4 to 2 in. • 32 to 51 mm36-148 Replacement blade, for both versions

Easy to calibrate and use, these unique cable ‘peelers’ allow you to precisely score roundtraveling cable jackets for fast removal without nicking the conductors underneath. Thespring-loaded blade can be adjusted by turning the dial. Comes in two sizes.

FCJ flat cable stripper Part DescriptionNumber

36-135-M1 FCJ Stripper36-138 Replacement blades, package of six36-139-M1 Replacement blade guide

Faster and safer than the utility knife it replaces, the FCJ stripper makes easy work ofstripping jackets from flat cables. A rigid, ergonomic handle fits the worker’s hand andprotects it from cuts and skinned knuckles. The blade is housed in an L-shaped hardened steelguide that eases the stripping operation while keeping the blade and fingers from touching.Two extra blades are included in the handle.

Sock Slicer™


36-177 Sock Slicer braid cutter

The Sock Slicer braid cutter is specially designed for fast, easy braid removal. Theprotected blade cannot nick conductors and can be repositioned for optimum sharpnessshould it ever get dull.

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

144

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

ToolsWire insulation strippers

QuickStripPart Description Number

017-05-0001 Draka QuickStrip wire stripper, self-adjusting, 017-05-0002 ‘black’ cartridge included017-05-0002 ’Black’ blade cartridge, straight blade, for PVC insulation, 34 - 8 AWG • 0.02 - 10 mm2

017-05-0004 ’Red’ blade cartridge, straight blade, for PVC insulation, 10 - 5 AWG • 0.4 – 16 mm2

017-05-0003 ’Blue’ blade cartridge, V-blade, for PTFE (Teflon) insulation, 28 - 12 AWG • 0.1 – 4 mm2

The Draka QuickStrip is a self-adjusting stripping tool that lightweight but strong andis equally suitable for both high volume production and field usage. It permits fineinsulation to be stripped without damaging the conductors. The ergonomic designensures comfort in the shop or field.

Automatic wire stripperPart DescriptionNumber

36-219 Automatic wire stripper, for 22 to 10 AWG36-220 Replacement blades, one pair

Manual wire stripperPart DescriptionNumber

37-177 Wire stripper, for 26 to 16 AWG

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

145

ToolsCrimpers and cutters

Draka QuickCrimp Part DescriptionNumber

017-5-0005 QuickCrimp, ratchet-style, tool only (no dies)017-5-0006 Die set, for 26 - 22 AWG • 0.1 - 0.4 mm2 and 12 - 10 AWG • 4 - 6 mm2

green and yellow insulated terminals and splices017-5-0007 Die set, for 22 - 14 AWG • 0.5 - 2.5 mm2

red and blue insulated terminals and splices017-5-0008 Die set, for 22 - 10 AWG • 0.5 - 6 mm2

non-insulated terminals, lugs and splices017-5-0009 Die set, for 24 - 8 AWG • 0.25 - 10 mm2

insulated and non-insulated wire ferrules017-5-0010 Die set, for 26 - 12 AWG • 0.1 - 4 mm2 power contacts

Crimping toolPart DescriptionNumber

36-097 Crimping tool, for bare or insulated terminals and splices for wire sizes 22 - 10 AWG

Flex conduit cutter Part DescriptionNumber

36-217 Flex conduit cutter, for 3/8 to 3/4 in. flex conduit and 14-2 to 2-4 MC cable36-218 Replacement blade, one

Steel core cutter


36-178 Steel core cutter

High-leverage cutters with Swiss-made carbide steel blades that make quick work of thesteel support cable found in traveling cables. Plastic-coated handles for comfort andgripability. Blades lock in a closed position for better fit in a toolbelt.

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

146

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

ToolsWire rope

Wire rope cutting tools Part Description Number

WR-IMPACT Impact-style wire rope cutter, Morse-Starrett 101, for wire rope sizes up to 3/4 in. • 19 mm

WR-HYDRAULIC Hydraulic-style wire rope cutter, Morse-Starrett W-075, for wire rope sizes up to 3/4 in. • 19 mm

WR-RATCHET Ratchet-style wire rope cutter, Cooper Tools 8690 TN, for wire rope sizes up to 3/4 in. • 19 mm

Wire rope measuring tools conform to proposed ASME A17.6 standardPart DescriptionNumber

WR-MT Wire rope measuring gauge, for imperial sizes, go/no go style, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 and 3/4 in.WR-MT-METRIC Wire rope measuring gauge, for metric sizes, go/no go style, 6, 8, 10, 11, 12, 13, 16 and 19 mm

If the rope fits in the groove, or if a rope with rouge fits the stepped groove, retire the rope. Measurements based on proposed ASME 17.6. Machined aluminum.

Quick-Check tension meterPart DescriptionNumber

WR-QCTM-2 Wire rope tension measurement meter, 8000 lb/35 kN/3500 kg range

The Quick-Check tension meter can be attached, used to measure tension and removed injust seconds per rope. The digital load cell assures accuracy of up to +/- 3%. The includedsheave set accommodates wire diameters of 1/4 in. through 3/4 in.

Digital caliper with casePart DescriptionNumber

WR-CALIPER-C Digital wire rope caliper, dual range (imperial and metric scales), includes special jaws for ease of use and rigid case

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

147

ToolsCompensation cable stripping kits, swaging tools and punches

Whisper-Flex and Steadi-Flex strip kitPart DescriptionNumber

WF-STRP Strip kit, with instructions

This kit includes angle mounting bracket (already assembled), clamps, nippers, utility knife,cable jacket cutter, hacksaw and gloves for use in preparing the end of all Draka compensatingcables. Carrying case included. Other tools required but not included are 3/4 in. wrench andflathead screwdriver.

Swaging tool, ferrules and stopsPart Description Number

36-143 Swaging tool 36-145 3/32 in. • 2 mm ferrules 2 ferrules/2 stops 36-144 1/8 in. • 3 mm ferrules 2 ferrules/2 stops

This bolt cutter-style swaging tool offers improved leverage and greaterspeed combined with economical durability. The strong forged jawscrimps ferrules on wire rope up to 1/8 in. • 3 mm diameter.

Greenlee knockout punchesPart Trade StandardNumber Sizes Packaging

36-008 1/2 to 1-1/4 136-009 1-1/2 to 2 1

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

148

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

ToolsBits and blades

Drill bitsPart Size & Type StandardNumber Packaging*

36-003 3/8 x 6 in. masonry bit 1236-042 1/2 x 6 in. masonry bit 1236-004 1/4 in. carbide bit 1236-037 1/8 in. high-speed bit 1236-041 1/4 in. high-speed bit 1236-014 5/16 in. high-speed bit 636-007 3/8 in. high-speed bit 636-040 #7 high-speed bit 1236-039 #21 high-speed bit 1236-038 #29 high-speed bit 12

Hole sawsPart Size & Type StandardNumber Packaging*

36-080 7/8 in. hole saw 136-084 1 in. hole saw 136-081 1-1/8 in. hole saw 136-086 1-1/4 in. hole saw 136-099 2 in. hole saw 136-047 2-1/8 in. hole saw 136-049 2-7/8 in. hole saw 1

Hacksaw bladesPart Size & Type StandardNumber Packaging*

36-006 32 teeth/in. hacksaw blade 10

Hole saw arborsPart Size & Type StandardNumber Packaging

36-083 9/16 to 1-3/16 in. hole saw arbor 136-048 1-1/4 to 6 in. hole saw arbor 1

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

149

Wire and reel organization Part Description Number

36-221 Hand wire caddy

36-222 Reel roller, for up to 30 in. reels, 2,000 lbs. capacity, 26 1/2 L X 33 1/2 W X 4 1/2 T in., 50 lbs. weight

Guide rail alignment gaugesPart DescriptionNumber

DRAKA-RAG-001 Rail alignment gauges, pair of clamp-style gauges, hard-shell case included

Draka’s easy-to-use rail alignment gauges are the perfect tool for ensuring that yourelevator guide rails are properly installed. Clamp the gauges to the rails directly acrossfrom each other (the clamps are adjustable depending on rail thickness). Thisstraightens the alignment string like a plumb line. If you can see the line through theprecisely-machined viewing holes, the rails are aligned. If you can’t, then adjust therails while the gauges are attached to confirm proper alignment.

ToolsReel organization and rail alignment

26 1/2 in.

33 1/2 in.

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

150

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Conduit benders - handle included


36-002 Conduit bender, for 1/2 in. EMT, 4 in. inside bending radius36-001 Conduit bender, for 3/4 in. EMT, 5 in. inside bending radius36-000 Conduit bender, for 1 in. EMT, 6 in. inside bending radius36-214 Conduit bender, for 1-1/4 in. EMT, 9 in. inside bending radius

Conduit benders have aluminum construction for easy handling. They have aprecision-located degree scale, star, arrow and rim notch for perfect bends everytime. Markings are raised and cast into bender body on both sides for easy visibility.Grooved internal hook surface helps prevent conduit from slipping. Flat hook surfaceprovides stable starting point.

WAGO tools


210-620 Screwdriver, with partially insulated shaft

285-171 Universal T-tool, for use with high-current terminal blocks

210-658 Operating tool, with partially isolated shaft, blade 3.5 x 0.5 mm, particularly suitable for actuator and sensor terminal blocks

ToolsConduit benders and WAGO tools

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

151

Nylon-insulated butt splices Part Size Color StandardNumber Packaging*

21-001 #22 - 18 Red 10021-002 #16 - 14 Blue 10021-009 #12 - 10 Yellow 100

ScotchLok® componentsPart Size Type StandardNumber Packaging*

22-000 #18 - 14 Style 560 - blue 10022-001 #22 - 16 Style 557 pigtail - red 10022-020 #22 - 16 Style 558 tap - red 10022-021 #12 - 10 Style 562 tap - yellow 100

Wire nutsPart Size Type StandardNumber Packaging*

22-004 #18 - 10 76B - red 10022-005 #18 - 12 74B - yellow 10022-003 #22 - 14 73B - orange 10022-010 #22 - 14 72B - blue 10022-009 #22 - 16 71B - gray 100

Crimp nutsPart Description StandardNumber Packaging*

22-031 Wire joint,min. 2 #24, max. 3 #18 100

22-032 Wire joint,min. 4 #18, max. 2 #12 100

Cable ties and mounting basePart Length Max. Width StandardNumber inches inches Packaging*

23-001 4.0 .095 10023-004 6.1 .141 10023-002 8.0 .185 10023-012 11.1 .141 10023-003 14.9 .275 10023-013 30.7 .275 10023-032 Mounting Base† .19 100

Wire marker cards and dispensersPart Description StandardNumber Packaging*

25-001 Wire marker cards, nos. 1 - 33 2525-003 Wire marker cards, nos. 34 - 66 2525-005 Wire marker cards, nos. 67 - 99 2525-006 Wire marker dispenser 1

Hardware for Electrical WorkUL listed, CSA certified

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

152

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Mechanical lugs Part Wire Size / Hole Size StandardNumber Packaging*

17-002 #14-6 / #10 10017-005 #1/0-4/0 / 3/8 in. 1017-001 #8-2 / 1/4 in. 5017-031 #14-6 / 3/8 in. 1017-032 #4-2/0 / 3/8 in. 10

Compression lugs Part Wire Size / Hole Size StandardNumber Packaging*

17-019 #1/0 / 3/8 in. 1017-034 #2/0 / 3/8 in. 1017-035 #3/0 / 3/8 in. 1017-036 #4/0 / 3/8 in. 1017-015 #1 / 3/8 in. 2017-020 #2 / 3/8 in. 2517-021 #4 / 3/8 in. 5017-037 #6 / 3/8 in. 5017-022 #8 / 3/8 in. 5017-008 #1 / 1/2 in. 20

Female disconnectsPart Type Size StandardNumber Packaging*

20-004 #22-18 non-insulated .110 x .032 in. 10020-047 #22-18 insulated .110 x .032 in. 100

Tape Part Description Standard Number Packaging*

16-006 #33 black electrical, 3/4 in. x 66 ft. 1016-008 #35 white electrical, 3/4 in. x 66 ft. 1016-009 #35 red electrical, 3/4 in. x 66 ft. 1016-010 #35 blue electrical, 3/4 in. x 66 ft. 1016-011 #35 green electrical, 3/4 in. x 66 ft. 1016-012 #35 yellow electrical, 3/4 in. x 66 ft. 1016-013 #35 orange electrical, 3/4 in. x 66 ft. 1016-014 #35 brown electrical, 3/4 in. x 66 ft. 1016-002 Friction, 3/4 in. x 60 ft. 116-003 Rubber, 3/4 in. x 22 ft. 116-005 #1700 electrical, 3/4 in. x 60 ft. 10

Ring terminals Part Type Size StandardNumber Packaging*

20-015 #22-18 insulated - red #6 ring 10020-026 #22-18 non-insulated #8 ring 10020-002 #22-18 insulated - red #10 ring 10020-001 #18-14 non-insulated #10 ring 10020-003 #16-14 insulated - blue #10 ring 10020-113 #16-14 insulated - blue #8 ring 100

Fork terminalsPart Type Size StandardNumber Packaging*

20-012 #22-18 non-insulated #6 fork 10020-048 #22-18 insulated - red #6 fork 10020-019 #22-18 insulated - red #8 fork 10020-020 #22-18 insulated - red #10 fork 10020-016 #16-14 insulated - blue #6 fork 10020-017 #16-14 insulated - blue #8 fork 10020-018 #16-14 insulated - blue #10 fork 100

Split bolt connectors Part Size StandardNumber Packaging*

17-041 #1-3/0 2517-046 #2-6 10017-073 #4-8 10017-086 #10-12 100

Lights and electricalPart DescriptionNumber

36-070 Rough service bulbs, 100 watt, package of 6037-001 Porcelain fixture, with collar and pull chain37-021 Plastic cage36-033 Drop light with cage and hook, 25 ft. cord36-034 Drop light with cage and hook, 50 ft. cord37-178 GFCI with cover, 125VAC, 15A

*These items may be purchased individually.

Hardware for Electrical WorkUL listed, CSA certified

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

153

Screws, fasteners and accessoriesPart DescriptionNumber

26-005 Round-head nuts and screws, 1/4 x 3/4 in., package of 10026-001 Round-head nuts and screws, 1/4 x 1 in., package of 10026-002 Round-head nuts and screws, 1/4 x 1-1/4 in., package of 10026-003 Round-head nuts and screws, 1/4 x 1-1/2 in., package of 10026-004 Round-head nuts and screws, 1/4 x 2 in., package of 100

54-001 Flat washers, 3/8 in., package of 10054-003 Flat washers, 1/4 in., package of 100

59-004 Lock washers, 3/8 in., package of 10054-002 Lock washers, 1/4 in., package of 100

55-001 Hex nuts, 1/4 in., package of 10055-002 Hex nuts, 3/8 in., package of 100

24-001 Nail-ins, 1/4 x 1 in., package of 100

24-025 Nail-ins, 1/4 x 1-1/2 in., package of 100

24-004 Lead anchors, 3/8 in., package of 10024-002 Lead anchors, 1/4 in., package of 100

36-035 Toggle bolts, 1/4 x 3 in., package of 100

36-036 Hex-head bolt, 1/4 x 1 in., package of 100

44-017 Threaded rods, 3/8 in. x 6 ft., package of 2509-051 Threaded couplings, 3/8 in., package of 100

NOTE: Standard fasteners are grade 2, zinc-coated.

Fasteners

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

154

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Strut and components Part DescriptionNumber

44-338 14-gauge strut, holes one side, 13/16 x 1-5/8 x 120, 500 (50 pieces)

44-339 12-gauge strut, holes one side, 1-5/8 x 1-5/8 x 120, 500 (50 pieces)

44-340 12-gauge strut, holes three sides, 1-5/8 x 1-5/8 x 120, 500 (50 pieces)

44-021 1/4 in. spring nut, for 1-5/8 in. strut, 100 qty.44-064 5/16 in. spring nut, for 1-5/8 in. strut, 100 qty.44-014 3/8 in. spring nut, for 1-5/8 in. strut, 100 qty.44-023 1/2 in. spring nut, for 1-5/8 in. strut, 100 qty.

44-024 1/4 in. spring nut, for 13/16 in. strut, 100 qty.44-018 3/8 in. spring nut, for 13/16 in. strut, 100 qty.44-072 1/2 in. spring nut, for 13/16 in. strut, 100 qty.

44-058 1/4 in. nut, for all strut, 100 qty.44-059 3/8 in. nut, for all strut, 100 qty.44-057 1/2 in. nut, for all strut, 100 qty.

Strut

Strut and components Part DescriptionNumber

44-341 Two-hole angle connector, 50 qty.

44-342 Three-hole angle connector, 50 qty.

44-343 Four-hole angle connector, 25 qty.

44-347 Five-hole angle connector, 25 qty.

44-344 Opposite side angle connector, 15 qty.

44-002 1/2 in. EMT strap, for all struts, 100 qty.44-009 3/4 in. EMT strap, for all struts, 100 qty.44-003 1 in. EMT strap, for all struts, 100 qty.44-019 1-1/4 in. EMT strap, for all struts, 100 qty.44-012 1-1/2 in. EMT strap, for all struts, 100 qty.44-004 2 in. EMT strap, for all struts, 50 qty.44-030 2-1/2 in. EMT strap, for all struts, 50 qty.

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

155

Bufferscertified to CE 0400

Solid buffersPart Style Diameter Height Load range @ 0.70 m/s Load range @ 1.0 m/sNumber mm mm max kg / min kg max kg / min kg

SD-BUFF-T2 T2 100 80 1140 / 235 800 / 235SD-BUFF-T3 T3 125 80 1505 / 235 1026 / 235SD-BUFF-E1 E1 100 160 1030 / 235 1030 / 235SD-BUFF-E2 E2 125 100 1510 / 260 1505 / 435SD-BUFF-E3 E3 125 160 1505 / 260 1505 / 401SD-BUFF-E4 E4 125 200 1590 / 401 1590 / 570SD-BUFF-E5 E5 140 100 1815 / 373 1580 / 542SD-BUFF-E6 E6 140 200 2120 / 260 1800 / 317SD-BUFF-E7 E7 165 160 3120 / 401 3040 / 600SD-BUFF-E8 E8 165 220 4080 / 500 3920 / 770

Lidror buffers are made from Polycell®, a cellular polyurethane elastomer.

They are maintenance-free (please inspect regularly)

Features include:

• 500 Kg/m3 density (+/-20 kg/m3)

• highly stable with a high dynamic load-bearing capacity

• up to 90% deformity

• resistant to oil, grease, petroleum and ozone

• operates from -40° to 80°C (-40° to 176°F)

Dia. at max. compression<1.4 x Ø

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

156

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Oil Buffers

Standard dutyPart Type Description Extended height Base size Mounting hole spacing Oil capacityNumber mps mm mm kg liters

014-6-0014 YH34/279 ZOB34 standard oil buffer, 773 190 x 160 150 x 100 1.60 400 fpm, with switch014-6-0015 YH35/435 ZOB35 standard oil buffer, 1122 190 x 160 150 x 100 2.45 500 fpm, with switch014-6-0016 YH36/80 ZOB36 standard oil buffer, 313 190 x 160 150 x 100 0.50 200 fpm, with switch014-6-0017 YH37/203 ZOB37 standard oil buffer, 613 300 x 200 250 x 150 3.10 315 fpm, with switch014-6-0018 YH38/249 ZOB38 standard oil buffer, 718 300 x 200 250 x 150 3.80 355 fpm, with switch

Light dutyPart Type Description Extended height Base size Mounting hole spacing Oil capacityNumber mps mm mm kg liters

014-6-0020 YH40/462 ZOB40 light duty oil buffer, 1206 300 x 200 250 x 150 4.60 500 fpm, with switch

Heavy dutyPart Type Description Extended height Base size Mounting hole spacing Oil capacityNumber mps mm mm kg liters

014-6-0011 YH31A/70 ZOB31 heavy duty oil buffer, 235 190 x 160 150 x 100 0.50 200 fpm, with switch014-6-0012 YH32/173 ZOB32 heavy duty oil buffer, 536 190 x 160 150 x 100 1.02 315 fpm, with switch

014-6-0019 YH39/300 ZOB39 freight oil buffer, 834 300 x 200 250 x 150 4.60 400 fpm, with switch 014-6-0013 YH33/219 ZOB33 heavy duty oil buffer, 639 190 x 160 150 x 100 1.27 355 fpm, with switch

NOTE: These buffers use ISO VG68 oil.

Mounting hole diameter is 14 mm.

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

157

Pit Safety Kits and Barricades

Pit accessoriesPart Description Number

PIT-LDR-16RR Pit ladder, 9 ft. tall with 16 in. anti-skid round rungs (measured inside uprights)PIT-LDR-16RR2X Pit ladder extension, 2 ft. tall with 16 in. anti-skid round rungs (measured inside uprights)PIT-LDR-12RR Pit ladder, 9 ft. tall with 12 in. anti-skid round rungs (measured inside uprights)

All PIT ladders include reversible ladder mounting brackets that permit the ladder to be mounted either 4-1/2 in. or 7 in. from the wall.

PIT-LIGHT-MC Pit light, with metal cage, safety guard, GFCI outlet and switch, 120 VAC, 15A

PIT-SWITCH Pit toggle stop switch, lockable, 120/277 VAC, 20A

PIT-KIT PIT-KIT, including all-steel, 16 in. wide round-rung ladder extending to 9 feet (PIT-LDR-16RR), wall-mounted safety light with GFCI outlet (PIT-LIGHT-MC) and toggle stop switch (PIT-SWITCH). Electrical components are US/Canadian 110V. PIT-KIT complies with ASME A17.1-2004 Section 2.2 for pit equipment.PIT-KIT-12 PIT-KIT, as above but with 12 in. wide round-rung ladder (PIT-LDR-12RR)

‘Do Not Use’ signsPart DescriptionNumber

022-6-0001 Do Not Use signs, 4 x 6 in., self-adhesive, 50 per pack

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

158

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Custom control boxescompliant with EN 418 and IEC/EN 60204-1

Enclosures

Draka offers a wide range of maintenance control switches and boxes. While we offer several popularconstructions as in-stock (see the folowing pages), we also offer a build-your-own-box capability withbuttons and connectors installed to your specifications.

Whether stock or custom, all Draka control switches and boxes are designed in compliance with therelevant standard for manufacturing (IEC/EN 60947-3, IEC/EN 60947-5-1) or use (EN 418 and IEC/EN60204-1).

Enclosures made of a self-extinguishing thermoplastic and meet the IEC/EN60529 IP65 (IP54 with

socket outlet) rating.

Contact blocks with spring loaded terminalscompliant with EN60947-5-1 and UL508 - certified by CE,cULusPart DescriptionNumber

PCW01 Contact blocks, 1 NC contact, rated for 690V (red)PCW10 Contact blocks, 1 NO contact, rated for 690V (green)

Contact blocks and the various switch types can be combined with enclosures to

create custom control boxes.

Electrical characteristics Contact blocks SwitchesCompliances IEC/EN60947-5-1 UL508 IEC/EN60947-3 UL508

Certifications IMQ, CCC, GOST, UL IMQ, CCC, GOST, UL

Rated insulation voltage 690V 690V

Rated impulse withstand voltage 4000V 4000V

Rated thermal current 16A 16A

Frequency 50/60 Hz 50/60 Hz

Rated operating current AC-15 24V@16A, 60V@12A, 110/230V@5A, 400/500/6990V@4A AC-21A 16A AC-22A 16A

Conditional short circuit withstand 1000A 5000A

Class gG fuses 10A@500V 20A@690V

Contact type Slow break double gap Slow break double gap

Terminal type Spring loaded M3.5

Wire sizes 20-12 AWG 16-12 AWG

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

159

External control switches and boxescompliant with EN 418 and IEC/EN 60204-1 - switches certified by IMQ, CCC, GOST, UL

Alarm push buttonPart DescriptionNumber

GM01FN3 Alarm push button, 40 mm mushroom button, 75 x 75 mm overall size, 150 g weight, conforms to CE 95/16

Pit bottom switchesPart DescriptionNumber

GM353 Pit bottom switch, 1P knob operation, 65 x 85 mm overall size, 90 g weight, 400V @ 16AGM355 Pit bottom switch, 2P knob operation, 65 x 85 mm overall size, 95 g weight, 400V @ 16AGM354 Pit bottom switch, 1P lever operation, interlock in the STOP position, 65 x 85 mm overall size, 95 g weight, 400V @ 16A

Recall drive stationsPart DescriptionNumber

GM408 Recall drive station, 40 mm 1 NC mushroom STOP button, Edison (North American-style) outlet 75 x 180 mm overall size, 265 g weight, conforms to EN 418 and IP54GM408.E Recall drive station, as above, with ergonomic mushroom STOP button

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

160

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Inspection push button stationscompliant with EN 418 and IEC/EN 60204-1 - switches certified by IMQ, CCC, GOST, UL

Inspection push button stationsPart DescriptionNumber

GM420 Inspection station, 30 mm 1 NC twist/release STOP button, 2 NO UP button, 2 NO DOWN button, 1 NO key switch 75 x 180 mm overall size, 690 g weight, conforms to EN 418 and IP54


GM488 Inspection station, 30 mm 1 NC twist/release STOP button, 2 NO UP button, 2 NO DOWN button, 2 NO/2 NC rotary changeover switch 75 x 180 mm overall size, 680 g weight, conforms to EN 418 and IP54


GM482 Inspection station, 40 mm 1 NC twist/release STOP button, 1 NC/1 NO UP button, 1 NC/1 NO DOWN button, 1 NO start button 75 x 180 mm overall size, 680 g weight, conforms to EN 418 and IP54


GM442 Inspection station, 40 mm 1 NC twist/release STOP button, 2 NO UP button, 2 NO DOWN button, 2 NO/2NC rotary changeover 1-0-2 switch 96 x 250 mm overall size, 635 g weight, conforms to EN 418 and IP54GM444 Inspection station, as above with 2 NO/2 NC rotary changeover 1-2 switch

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

161

Inspection push button stationscompliant with EN 418 and IEC/EN 60204-1 - switches certified by IMQ, CCC, GOST, UL

Inspection push button stationsPart DescriptionNumber

GM445 Inspection station, 40 mm 1 NC twist/release STOP button, 2 NO UP button, 2 NO DOWN button, 2 NO/2 NC rotary changeover 1-0-2 switch, 10A Schuko outlet, 96 x 250 mm overall size, 680 gms weight, conforms to EN 418 and IP54GM441 Inspection station, as above with 2 NO/2 NC rotary changeover 1-2 switch


GM483 Inspection station, with LED pilot light, 1 NO UP button, 1 NO DOWN button, 2 NO/2 NC rotary changeover 1-0-2 switch, 75 x 180 mm overall size, 600 g weight, conforms to EN 418 and IP54


GM670 Inspection station, 40 mm 2 NC twist/release STOP button, 2 NO UP button, 2 NO DOWN button, 1 NO/1 NC alarm button, 3 NO/3 NC rotary changeover 1-0-2 switch, 10A Schuko outlet, 96 x 320 mm overall size, 800 g weight, conforms to EN 418 and IP54GM660 Inspection station, as above with 3 NO/3 NC rotary changeover 1-2 switch


GM677 Inspection station, 40 mm 2 NC twist/release STOP button, 2 NO UP button, 2 NO DOWN button, 2 NO common button, 3 NO/3 NC rotary changeover 1-0-2 switch, 10A Schuko outlet, 96 x 320 mm overall size, 800 g weight, conforms to EN 418 and IP54GM663 Inspection station, as above with 3 NO/3 NC rotary changeover 1-2 switch

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

162

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Inspection Stations and Stop Switches

Top Of Car Inspection (TOCI) stations Part DescriptionNumber

TOCI-L Top of car inspection box, with GFCI receptacle and light fixture/cageTOCI-LF Top of car inspection box, with GFCI receptacle, light fixture/cage and fire service light/buzzer indicatorsTOCI-LA Top of car inspection box, with GFCI receptacle, light fixture/cage and audible 6 - 28VDC alarmTOCI-LFA Top of car inspection box, with GFCI receptacle, light fixture/cage, fire service light/buzzer indicators and audible 6 - 28VDC alarmCNTBLK-NO Additional NO contact block CNTBLK-NC Additional NC contact block

TOCI stations house large, easy-to-read UP, DOWN, COMMON and STOP controls as well as a normal/inspection switch,125VAC/25A GFCI receptacle and light fixture/cage in a bright yellow metal enclosure. They are available in four versions -with lamp fixture, lamp/fire service, lamp/alarm and lamp/fire service/alarm. NOTE: All stations come unwired; some fieldassembly required. Light bulb not included.

Stop switchesPart Description QuantityNumber

EN418-A Locking stop switch 1

EN418-A stop switches use a push-pull action for sure, safe operation. A four-prong guard helps prevent accidental engagementof the switch. Large diagrams printed on the switch show clearly which are the RUN and STOP positions, while indicator windowsshow ‘green for go’ when the switch is in the ON position and ‘red for stop’ when in the STOP position.

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

163

Pendant StationsFive-button pendant stations (Up, Down, Common, Locking Stop and Tubular Key Switch)

Standard pendant stationsPart Description Cable Length Termination(s)Number ft • m

PEND-5B-T Pendant station unwired nonePEND-5W-T Pendant station, with pigtail 15 • 4.6 loose wiresPEND-5W-TC Pendant station, with pigtail 15 • 4.6 male connectorPEND-5W-TV Pendant station, with pigtail made to order loose wiresPEND-15-1 Cable extension 15 • 4.6 female connector/loose wiresPEND-50-1 Cable extension 50 • 15.2 female connector/loose wiresPEND-15-2 Cable extension 15 • 4.6 female connector/male connectorPEND-50-2 Cable extension 50 • 15.2 female connector/male connector18/6 SEOW Cut-to-length cable specify none

Pendant stations with 125V/20A GFCIPart Description Cable Length Termination(s)Number ft • m

PEND-5W-TG Pendant station, with pigtail and GFCI 15 • 4.6 loose wiresPEND-5W-TGC Pendant station, with pigtail and GFCI 15 • 4.6 male connectorPEND-5W-TGV Pendant station, with pigtail and GFCI made to order loose wiresPEND-5WG-TC* Pendant station, with pigtail 15 • 4.6 male connectorPEND-8GC-1* Cable extension for PEND-5WG-TC, with GFCI 8 • 2.45 female connector/loose wiresPEND-15G-1 Cable extension, for GFCI versions 15 • 4.6 female connector/loose wiresPEND-50G-1 Cable extension, for GFCI versions 50 • 15.2 female connector/loose wiresPEND-15G-2 Cable extension, for GFCI versions 15 • 4.6 female connector/male connectorPEND-50G-2 Cable extension, for GFCI versions 50 • 15.2 female connector/male connector14/3-18/5 SEOW Cut-to-length cable, for GFCI versions specify none*PEND-5WG-TC can ONLY be used in combination with PEND-8GC-1

Replacement partsPart Description Number

PEND-8REC 8-conductor replacement receptacle kit, with female connectorPEND-8PLUG 8-conductor replacement receptacle kit, with male connectorPEND-6REC 6-conductor replacement receptacle kit, with female connectorPEND-6PLUG 6-conductor replacement receptacle kit, with male connectorPEND-TUBEKEY Key switch tubular replacement, with mounting hardwarePEND-UP Up button replacement, with 1 NO + 1 NC contact blocks and mounting hardwarePEND-DOWN Down button replacement, with 1 NO + 1 NC contact blocks and mounting hardwarePEND-ENABLE Common button replacement, with 1 NO contact block and mounting hardwarePEND-STOP Emergency stop button replacement, with 1 NC contact block and mounting hardware

PEND-5 series pendant stations are made of high-impact plastic for durability and electrical safety. Keyed lockout and two-handed operation further increase their safe usage. Options include a 15 ft. • 4.6 meter pigtail; GFCI (Ground Fault CircuitInterrupter 120VAC) on the pigtail; connectorized pigtails; and cable extensions of either 15 ft. • 4.6 m or 50 ft. • 15.2 m.

15’

15’

15’

15’

15’

1

50’

50’

X’

X

X’

15’

15’

50’

50’

BIG-TOC and LIL-TOC (Top Of Car) safety rail kits install on top of freight and passenger traction elevators to create a safer and more securecar-top environment for both people and their tools. These permanent guardrail kits are easy to install and quickly adjust to the required size.

They are adaptable to both front-opening and front-and-rear opening car types. All rails, bolts, nuts and hardware are included. The majorsiderail components come pre-assembled. Installation generally takes under an hour. The toe board is ordered separately and serves as anadded measure to prevent the loss of tools and other important items.

Determining width and depth requirements for your TOC safetyrail kit:

Width - The distance between the roller guide platesdetermines width, because the TOC side rails mount insidethe roller guide plates.

Depth - Measure the inside car Height - Height is adjustable and is measured from the top of the car to the top handrail of the installed TOC safety rail kit.

SHOWN WITH FRONT OPENING

TOTAL HEIGHT ISADJUSTABLE UP TO

THE REQUIRED HEIGHTOF 42 INCHES

AS MEASURED FROMTOP OF CAR

DEPTHWIDTH

24 in.

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

164

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

BIG-TOC and LIL-TOC Top Of Car safety rails - conforms to A17.1Part Toe-board Description Opening Size Range (min > max) WeightNumber Part Number Width (in • m) Depth (in • m) lbs • kg

100-01 100-01TB LIL-TOC front 57 > 82 • 1.45 > 2.08 57 > 82 • 1.45 > 2.08 148 • 67.2100-01 / 100-20LIL-TOC w/ two-sided extension kit front 57 > 82 • 1.45 > 2.08 99 > 123 • 2.51 > 3.12 183 • 83.2100-01 / 100-19 LIL-TOC w/ three-sided extension kit front 99 > 123 • 2.51 > 3.12 99 > 123 • 2.51 > 3.12 200 • 90.9100-03 100-03TB BIG-TOC 60 front 69 > 118 • 1.75 > 3.00 69 > 118 • 1.75 > 3.00 184 • 83.6100-03 / 100-20 BIG-TOC 60 w/ two-sided extension kit front 69 > 118 • 1.75 > 3.00 123 > 159 • 3.12 > 4.0 219 • 99.5100-03 / 100-19BIG-TOC 60 w/ three-sided extension kit front 123 > 159 • 3.12 > 4.04 123 > 159 • 3.12 > 4.04 236 • 107.3100-05 100-05TB BIG-TOC 72 front 69 > 118 • 1.75 > 3.00 81 > 130 • 2.06 > 3.30 192 • 87.3100-05 / 100-20 BIG-TOC 72 w/ two-sided extension kit front 69 > 118 • 1.75 > 3.00 135 > 171 • 3.43 > 4.34 227 • 103.2100-05 / 100-19BIG-TOC 72 w/ three-sided extension kit front 123 > 159 • 3.12 > 4.04 135 > 171 • 3.43 > 4.34 244 • 110.9100-13 100-13TB LIL-TOC front 45 > 70 • 1.14 > 1.78 69 > 106 • 1.75 > 2.69 158 • 71.8100-15 100-15TB LIL-TOC front 57 > 82 • 1.45 > 2.08 69 > 106 • 1.75 > 2.69 162 • 73.6100-17 100-17TB LIL-TOC front 57 > 82 • 1.45 > 2.08 45 > 70 • 1.14 > 1.78 141 • 64.1100-13 / 100-20LIL-TOC w/ two-sided extension kit front 45 > 70 • 1.14 > 1.78 123 > 147 • 3.12 > 3.73 193 • 87.7100-15 / 100-20LIL-TOC w/ two-sided extension kit front 57 > 82 • 1.45 > 2.08 123 > 147 • 3.12 > 3.73 197 • 89.5100-17 / 100-20LIL-TOC w/ two-sided extension kit front 57 > 82 • 1.45 > 2.08 99 > 111 • 2.51 > 2.89 176 • 80.0100-13 / 100-19 LIL-TOC w/ three-sided extension kit front 99 > 111 • 2.51 > 2.89 123 > 147 • 3.12 > 3.73 210 • 95.5100-15 / 100-19 LIL-TOC w/ three-sided extension kit front 99 > 123 • 2.51 > 3.12 123 > 147 • 3.12 > 3.73 214 • 97.3100-17 / 100-19 LIL-TOC w/ three-sided extension kit front 99 > 123 • 2.51 > 3.12 99 > 111 • 2.51 > 2.89 193 • 87.7100-07 100-07TB LIL-TOC F&R F & R n/a 57 > 82 • 1.45 > 2.08 116 • 52.7100-09 100-09TB BIG-TOC 60 F&R F & R n/a 69 > 118 • 1.75 > 3.00 142 • 64.5100-11 100-11TB BIG-TOC 72 F&R F & R n/a 81 > 130 • 2.06 > 3.30 149 • 67.7100-07 / 100-20 LIL-TOC F&R w/ two-sided extension kit F & R n/a 99 > 123 • 2.51 > 3.12 151 • 68.6100-09 / 100-20 BIG-TOC 60 F&R w/ two-sided extension kit F & R n/a 123 > 159 • 3.12 > 4.04 177 • 80.5100-11 / 100-20 BIG-TOC 72 F&R w/ two-sided extension kit F & R n/a 135 > 171 • 3.43 > 4.34 184 • 83.6

Top of Car Safety RailsTOC kits

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

165

Hoistway Safety HOSS Systems

BIG-HOSS™ Hoistway Obstruction Shield System


BIG-HOSS Hardware Cloth Base Mounting Kit, 100 feet • 30.48 m lengthBIG-HOSS-75 Hardware Cloth Base Mounting Kit, 75 feet • 22.86 m lengthBIG-HOSS-150 Hardware Cloth Base Mounting Kit, 150 feet • 45.72 m length

The Hoistway Obstruction Shield Systems are used to prevent round and flat elevator traveling cablefrom repetitively striking obstructions in the hoistway and from crossing over into adjoining hoistways.Their use may help avoid possible interference and extend the life span of the installed elevator cables.

The BIG HOSS kit includes 100 ft • 30.48 m of the 1.5 ft • .46 m wide shielding material (1/2 in. • 13 mmmesh hardware cloth) and all the mounting hardware needed to attach the shield within the hoistway.All components are shipped in a single bag.

LIL-HOSS™ shield system extensionsPart Description Number

LIL-HOSS Hardware Cloth Extension Mounting Kit, 100 feet • 30.48 m lengthLIL-HOSS-75 Hardware Cloth Extension Mounting Kit, 75 feet • 22.86 m lengthLIL-HOSS-150 Hardware Cloth Extension Mounting Kit, 150 feet • 45.72 m length

The LIL HOSS kit includes an additional 100 ft • 30.48 m of the shielding material and all the mountinghardware needed to attach the shield to the top of the BIG HOSS system and walls of the hoistway. Likethe BIG HOSS, all LIL HOSS components are shipped in a single bag.

Door wedgePart Description Number

MIS-DW-T2 Door wedge safety tool, for use on single-slide, center-opening, or two-speed hoistway door systems with sill grooves at least 7/16 in. wide

Door locksPart Description Number

020-2-0200 20041084 door lock, triangle key (not included)

020-2-0201 615620 door lock, triangle key

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

166

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Hoistway scaffoldfor inspection and maintenance

PANO mobile scaffoldPart DescriptionNumber

015-6-21070 PANO mobile hoistway scaffold, single-level, 2.3 ft • 0.7 m wide, includes boxes type 5 and 6015-6-21100 PANO mobile hoistway scaffold, single-level, 3.3 ft • 1.0 m wide, includes boxes type 4, 5 and 6015-6-22070 PANO mobile hoistway scaffold, double-level, 2.3 ft • 0.7 m wide, includes boxes type 4, 5 and 6015-6-22100 PANO mobile hoistway scaffold, double-level, 3.3 ft • 1.0 m wide, includes boxes type 4, 5 and 6991199271 Single floor panel kit, 2.3 ft • 0.7 m wide (scaffold not included)991199201 Single floor panel kit, 3.3 ft • 1.0 m wide (scaffold not included)991199272 Double floor panel kit, 2.3 ft • 0.7 m wide (scaffold not included)991199202 Double floor panel kit, 3.3 ft • 1.0 m wide (scaffold not included)9910990005 Storage box, Type 49910990006 Storage box, Type 59910990007 Storage box, Type 6

The Mobil PANO work scaffolding is the perfect tool for installation of machine room-less (MRL)elevators as well as service and repair work on existing units. The units are OSHA-certified(OSHA 29 CFR Part 1926.451 - Safety and Health Regulations for Construction; Scaffolds;General requirements. ANSI A10.8 - Scaffolding – Safety Requirements).

Unlike conventional scaffolding, this unique product is constructed of fiberglass-reinforcedpolyester (FRP) joined together by fabricated flat steel and pin connections. The FRP providesfor high loading capacity, long service life, low weight, exceptional corrosion resistance andsuperior electrical insulation. It is designed for multiple installations into virtually any shaftdoor opening with virtually no tools.

It reaches approximately 6.5 feet (2 meters) into the shaft. Each level of the scaffold supportsa load of 50 lb/ft2 which translates into just over 1,000 pounds per level. That’s more thanenough support for two mechanics and their tools.

Because FRP is a relatively light material (the heaviest sub-assembly weighs just 68 pounds),the PANO can be assembled by just one operator in about 50 minutes. This eliminates theexpense in contracting third parties for scaffolding. The scaffolding can be assembled anddisassembled several times per day and is portable between job sites.

The PANO scaffold can be ordered as single-level or double-level models in either 2.3 foot (700mm) or 3.3 foot (1 meter) widths. The kits include floor panels and all required stowage boxes.

The panel kits are used to change the width of the PANO scaffold. They include the cross-members and flooring necessary to widen/narrow an existing scaffold.

Order storage boxes for replacement or if extra boxes are needed.

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

167

Car Security

DrakaCam surveillance cameraPart DescriptionNumber

021-7-0001 DrakaCam color camera, with remote control, battery backup, 2GB memory card, flush mounting kit, USB SD card reader, 9VDC power supply (UL approved), in a stainless steel housing, setup software and HS viewer

DrakaCam is a standalone surveillance camera with built-in digital image recording function formedium-term elevator surveillance applications. The DrakaCam system contains a surveillancecamera with on-board motion sensor, internal extra-high capacity battery, remote control, 2GBmemory card, card reader, battery charger and PC configuration software (Windows 2000 [SP4],Windows XP [SP2], Windows Vista). The camera captures high resolution color images when motionis detected and stores them onto a removable memory card for easy viewing on a computer orPDA.

The camera can store up to 32,000 images and will optionally overwrite the oldest images whenthe memory card is full, for ‘set and forget’ operation. In this scenario, the memory card will holdaround 10 days of history at any given time.

FEATURES

• Unique “wire-free” surveillance camera mounted in top corner of elevator

• Compact, lightweight and portable

• Operates independently for up to 37 weeks on its internal battery

• ‘Set and forget’ operation

• Motion-activated or Time-lapse modes

• Rugged lockable stainless steel case to prevent vandalism

• Customized image-capture sequence and image encryption

• Time and date stamped images with programmable text overlay

• Flexible scheduler for independent arming and disarming of camera

• Ideal for monitoring vandalism, graffiti or criminal activity in elevators

• Digital signature including camera ID, within each image for use in legal proceedings

Status LED

Remote control

Motion sensor

Pinhole camera

Stainless steel housing

9VDC power supply

2Gb memory card

USB memory card reader

Removable PC board camera

Software

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

168

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N

Car Security

VideoComm RT Wave surveillance cameraPart DescriptionNumber

EV-L2R5803 VideoComm RT Wave camera system, wireless, with transmitter, receiver, power supplies, mounting brackets, remote control and cablingCCD-S480EV Camera, 480 line resolution, full motion (30 fps)A-RG-BNC25BP Cable, for power and video transmission, 25 ft • 7.6 mNOTE: Coaxial or UTP cable for the security monitor connection is available separately

The RT Wave Wireless Elevator Video System is the first wireless video security systemdesigned specifically for use with elevators. This unique product delivers real-time DVD-quality encrypted digital video at distances of up to 200 floors (far exceeding currentrequirements).

The RT Wave system features a preconfigured 802.11a plug-and-play design and requiresabsolutely no software setup or programming, greatly minimizing installation time.

The camera is mounted in any corner of the elevator cab and connected to a power source.The transmitter is usually mounted to the bottom of the cab (although it may be mounted ontop of the cab with the receiver in the overhead depending on circumstances) with thepower/signal cable routed to the camera and a second power source. Finally, the receiver ismounted in the pit and connected to a power source. Coax or UTP cable – also available fromDraka – can then be routed to a security monitoring area. (A hand-held monitor isrecommended during installation for proper camera set-up.)

The operating frequency of the system is dual radio 5.725GHz – 5.875GHz @ 20 MHzbandwidth with automatic channel selection. This means that surrounding signals will neverinterfere with the system. The private SSID 64-bit encrypted data stream means your signalsare safe from hackers.

EV-L2R5803 includes:Mounting brackets (2)

Transmitter

Power supplies (3)

Antennas (6)

Remote control

Camera Power/signal cable

Camera

Tx

12VDC power/signal cable

Remotemonitor

Coax orUTP cable

200 floors range

12VDC110VAC

110VAC

Rx

Receiver

FEATURES

• Tamper-proof corner mount Sony camera

• All-weather transmitter

• All-weather receiver

• Three power supplies

• Six antennas

• Two universal mounting brackets

• 25-foot video/power siamese cable

• Remote control

• Installation and operating instructions

• One-year warranty

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

169

Limit switchesPart DescriptionNumber

020-4-0043 NZ-T1R236-02Z limit switch, < 15 N activation, 2 NC, automatic reset, rated for IP65, movement > 6.5 mm, electric clearance > 6.0 mm, rated for use at 230VAC@4A, [email protected], 500VAC@1A 97 JPG


020-4-0044 NZ-Z1R236-11Z limit switch, < 15 N activation, 1 NO / 1 NC, manual reset, rated for IP65, movement > 6.5 mm, electric clearance > 6.0 mm, rated for use at 230VAC@4A, [email protected], 500VAC@1A unknown


020-4-0052 Cable gland, to fit bottom of switches M20 thread, cable OD range 0.19 - 0.39 in.


020-4-0053 Adapter, plastic, to fit bottom of switches. converts 20 mm male to 1/2 in. NPT female


020-4-0161 Lock nut, plastic, for use with cable gland

020-4-0052 when mounting to box


020-4-0039 ZS231-11YR(A) limit switch, < 15 N activation, 1 NO / 1 NC, manual reset, rated for IP65, movement > 6.5 mm, electric clearance > 6.0 mm, rated for use at 230VAC@4A, [email protected], 500VAC@1A ppt 87 JPG PP page 71


020-4-0040 NZ-ZS231-11YR(B) limit switch, < 15 N activation, 1 NO / 1 NC, manual reset, rated for IP65, movement > 6.5 mm, electric clearance > 6.0 mm, rated for use at 230VAC@4A, [email protected], 500VAC@1A ppt 88 JPG PP page 72


020-4-0041 NZ-TV231-11YU limit switch, < 15 N activation, 1 NO / 1 NC, automatic reset, rated for IP65, movement > 6.5 mm, electric clearance > 6.0 mm, torque < 0.15 N. rated for use at 230VAC@4A, [email protected], 500VAC@1A ppt 77 99 JPG


020-4-0042 NZ-T1R236-11Z limit switch, < 15 N activation, 1 NO / 1 NC, automatic reset, rated for IP65, movement > 6.5 mm, electric clearance > 6.0 mm, rated for use at 230VAC@4A, [email protected], 500VAC@1A ppt 94 JPG PP page 75

Hoistway/Hatch SwitchesListings and certifications as noted

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

170

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N


020-4-0045 NZ-Z1R236-02Z limit switch, < 15 N activation, 2 NC, manual reset, rated for IP65, movement > 6.5 mm, electric clearance > 6.0 mm, rated for use at 230VAC@4A, [email protected], 500VAC@1A 96 JPG


020-4-0046 NZ-TS236-11Z limit switch, < 15 N activation, 1 NO / 1 NC, automatic reset, rated for IP65, movement > 6.5 mm, electric clearance > 6.0 mm, torque < 0.15 N. rated for use at 230VAC@4A, [email protected], 500VAC@1A ppt 77 99 JPG 89 JPG


020-4-0047 NZ-TV10H236-11Z limit switch, < 15 N activation, 1 NO / 1 NC, automatic reset, rated for IP65, movement > 6.5 mm, electric clearance > 6.0 mm, torque < 0.15 N. rated for use at 230VAC@4A, [email protected], 500VAC@1A ppt page 78 101 JPG

NOTE: Cable glands and adapters sold separately.NOTE: These switches have 20M-threaded entries.

Hoistway/Hatch SwitchesListings and certifications as noted


020-4-0048 NZ-TV7H236-11Z limit switch, < 15 N activation, 1 NO / 1 NC, automatic reset, rated for IP65, movement > 6.5 mm, electric clearance > 6.0 mm, torque < 0.15 N. rated for use at 230VAC@4A, [email protected], 500VAC@1A


020-4-0160 NZ-TV7H236-11Z limit switch, < 15 N activation, 1 NO / 1 NC, automatic reset, rated for IP65, movement > 6.5 mm, electric clearance > 6.0 mm, torque < 0.15 N. rated for use at 230VAC@4A, [email protected], 500VAC@1A ppt page 78 100 JPG

Mounting brackets for limit switchesPart DescriptionNumber

LS-BRKT-G Mounting bracket, for 020-4-0160 limit switchesLS-BRKT-KIT-G Mounting bracket kit, includes mounting bracket, hardware and one 020-4-0160 limit switchLS-STRUTBRKT-17 17 in. adjustable strut-style bracket, assembled, with mounting hardware and one 020-4-0160 limit switch

NOTE: Cable glands and adapters sold separately.NOTE: These switches have 20M-threaded entries.

954.971.1115 / fax 954.917.7337 800.526.0026

www.SEESinc.comC

ON

ST

RU

CT

ION

/M

OD

ER

NIZ

AT

ION

171

Hoistway/Hatch SwitchesAll switches UL listed, CSA certified

Limit switch treesPart DescriptionNumber

LS-TREE Limit switch trees, pair, 10 ft • 3.05 m tall, with four pre-wired roller-style limit switches and junction box

Hoistway limit switch trees feature four UL listed/CSA certified 020-4-0160 limit switches, a junctionbox with terminal block, and two 40-inch attachment rails. The trees are ordered in pairs.

The trees are shipped pre-wired to the terminal block for easy field installation. The switch mountingsare adjustable and can be positioned on the tree for maximum flexibility.

800.526.0026 954.971.1115 / fax 954.917.7337

www.SEESinc.com

172

CO

NS

TR

UC

TIO

N/

MO

DE

RN

IZA

TIO

N


LS-1B Limit switch, for setting zoning, normal and final limits, 1 NO and 1 NC contacts, rated for 300VAC@8A or 230VDC@1A


LS-1W Limit switch, like LS-1B above but with weatherproof design


LS-1D Limit switch, for setting zoning, normal and final limits, 2 NO and 2 NC contacts, rated for 300VAC@8A or 230VDC@1A


LS-1DW Limit switch, like LS-1D above but with weatherproof design

Mounting brackets for limit switchesPart DescriptionNumber

LS-1B-BRKT Mounting bracket, for all EECO

limit/magnetic switches

Hoistway/Hatch Switches by EECOAll switches UL listed, CSA certified

Limit and magnetic switchesPart DescriptionNumber

MV-4C Permanent magnet switch, for zone switches and leveling control units, dead zone, < 1/8 in. @ 1/4 in. gap, 1 NO and 1 NC contacts, rated for 300VAC@8A or 230VDC@1A


MV-4W Permanent magnet switch, like MV-4C above but with weatherproof design


MV-4D Permanent magnet switch, for zone switches and leveling control units, dead zone < 1/8 in. @ 1/4 in. gap, 2 NO and 2 NC contacts, rated for 300VAC@8A or 230VDC@1A


MV-4DW Permanent magnet switch, like MV-4D above but with weatherproof design


LDS3004A Permanent magnet inductor switch, for slowdown and landing positions, recommended for retrofit of EECO vane-operated landing systems, 1 NO and 1 NC contacts, rated for [email protected]

C SEESin c.com ONS TABLE OF CONTENTS TRUCTION...

Documents

Transcript of C SEESin c.com ONS TABLE OF CONTENTS TRUCTION...