C omote 8.75-11

2
Ground Mount for Power Generation Businesses Photovoltaic Module Mounting System 5 Key Features Mass Production = Low Cost! Superb Earthquake Resistance Innovative Design Reduces Number of Parts! Supports A Wide Variety of Panels Sub-Assembly Allows for Easy Installation!

Transcript of C omote 8.75-11

Page 1: C omote 8.75-11

Ground Mount for Power Generation BusinessesPhotovoltaic Module Mounting System

5 KeyFeatures

Mass Production= Low Cost!

SuperbEarthquakeResistance

InnovativeDesign Reduces Number of Parts!

SupportsA Wide Variety

of Panels

Sub-AssemblyAllows for Easy

Installation!

Page 2: C omote 8.75-11

Installation Requires Only 3 Simple Steps!

■ 4 Configurations Available For Different Environments!

Mount parts are assembled in a pre-assembly prior to shipment from our factory, shortening installation time significantly.

Easy installation with an impact wrench!

Array

Module Orientation

Tilt Angle

Wind Speed

Vertical Snow Depth

Snow Load

Building Height

Design Specifications

4 columns, 2 rows

Horizontal

10 degrees

Up to 76 mph (34 m/s)

Up to 20 inches (50 cm)

20 N/㎡/cm

Ground Level Installation

How?

Configuration

Image

Rails

Bolts

1 Place ballasts 2 Attach pre-assembled base rails 3Attach main support rails

Material

Coating

Material

Coating

Clamps

Salt Damage Prevention

1 (standard)

Complies with ASTM A283

Grade C, Grade DComplies with ASTM A123

Coating Grade 50-60

―No

2 (standard)

Complies with ASTM A193

Grade B8

Ruspert®*

―Yes

3 (w/front clamp)

Complies with ASTM A283

Grade C, Grade DComplies with ASTM A123

Coating Grade 50-60

ZAM® K27**

No

4 (w/front clamp)

Complies with ASTM A193

Grade B8

Ruspert®*

ZAM® K27**

Yes

Complies with ASTM A283 Grade C, Grade D

Complies with ASTM A123 Coating Grade 50-60

* Ruspert® metal finish is a high-grade anti-corrosion surface treatment technology developed by Nihon Ruspert Co., Ltd.**”ZAM” is a registered trademark of Nisshin Steel Co., Ltd. “ZAM” is the trade name of a Zn-Al-Mg alloy developed by Nisshin Steel Co., Ltd. for hot-dip galvanizing.

【Nemy North America, Inc.】232 W. Main Street, #203Tustin, CA 92780 USATel: 714-941-0566URL: http://www.nemy-na.com

【Nemy, Inc.】 2-24-3 Ohashi, Nakamura Bldg. 7th FloorMeguro-ku, Tokyo 153-0044, JapanTel: +81-3-5430-3103