C-316SFeb2008
-
Upload
heri-setyanto -
Category
Documents
-
view
212 -
download
0
Transcript of C-316SFeb2008
![Page 1: C-316SFeb2008](https://reader031.fdocuments.in/reader031/viewer/2022020517/577c7ed91a28abe054a28bb8/html5/thumbnails/1.jpg)
The Versa C-316 Series stainless steel body-ported valve is a high flow, 3 or 5-port, solenoid valve. The sealing design is that of Versa’s proven elastomer packed plunger producing bubble-tight performance along with long trouble-free product life. This seal design also yields the highest flow available in the smallest package.
The C-316 Series utilizes stainless steel bodies,
actuating caps and internal parts making this series of
valves ideal for use in the most aggressive
environments. Seals are FKM (fluorocarbon).
Solenoid materials are a function of area classification
rating. See options for details.
The C-316 Series is available as either a 4-way, for
double acting devices or a 3-way, for spring return
devices. The 3-way function can be specified as either
normally closed or opened. All solenoid actuators are
solenoid/pilot type, which allows the use of the smallest
solenoids available resulting in low power
consumption. This design also assures a positive
shifting force which makes certain the valve shifts
when energized and reduces the chance of coil burnout.
Single solenoid spring return models utilize an air
assisted spring return feature assuring a positive return.
Double solenoid models are equipped with a detent that
maintains the valve in the last shifted position, even in
high vibration environments. A complete selection of
electrical connections, power requirements and area classifications, makes Versa's C-316 the valve of choice for demanding
applications.
on the C-316 Series. With the loss of solenoid signal, the valve shifts closed and cannot be re-shifted until manually reset. Versa's latching solenoid is the benchmark in valve actuator controls.
Flow Rate: Cv = 2.0 (Kv = 29.3) Port Size: Inlet, cylinder and exhaust: ¼” NPT Media: Pneumatic only Lubricator not required Expilot Solenoid: Consult Factory
Pressure: 25 to 150 psi (1.8 to 10.3 bar), Single solenoid, spring return 15 to 150 psi (1.0 to 10.3 bar), Double solenoid, detent For applications above 125 psi (8.6 bar), exhaust flow controls or mufflers are recommended. Temperature:
Materials: Valve body and internal parts: 316L stainless steel Actuator caps: 316L stainless steel Valve seals: FKM (fluorocarbon) Screws: Stainless steel Solenoid internal parts: 304, 430F and 302 stainless steel Coil/solenoid housing Per solenoid option selected. See option section.
Side Ported
C-316 SERIES Stainless Steel 3-Way and 4-Way Solenoid Valves
Versa Products Company, Inc . , 22 Spring Valley Rd., Paramus, NJ 0 7 6 5 2 USA Phone (201) 843-2400 Fax (201) 843-2931 Versa BV, Prins Wil lem Alexanderlaan 1429, 7312 GB Apeldoorn, The Netherlands Phone: +31-55-368-1900 Fax: +31-55-368-1909 e-mail : sa [email protected] www.versa-valves.com
Versa’s proven and well-accepted solenoid latch option for single solenoid, spring return, 3-way and 4-way valves, is also available
-55 to 200° F (-48 to 93° C), Media and ambient (option -44) -5 to 200° F (-20 to 93° C), Media and ambient (standard)
Bulletin C316S c
CMYK
The Versa C-316 Series stainless steel NAMUR mount actuator control valve is a high flow, bubble-tight, 5-port, solenoid
valve. It is designed to mount directly to any NAMUR actuator, thus reducing actuator response time and space. Installed costs
are also lower as the need for tubing, fittings, brackets and assembly labor are greatly reduced. All mounting screws and seals
are included with valve.
The C-316 Series utilizes stainless steel bodies, actuator caps
and internal parts making this series compatible for use in the
most aggressive environments. Seals are FKM (fluorocarbon).
Solenoid materials are a function of area classification rating.
See options for details.
The 5-port design allows the C-316 NAMUR to be ordered as
either a 4-way, for double acting actuators or a 3-way, for
spring return actuators. When the 3-way function is utilized, the
unused exhaust port becomes an actuator vent where a filter/
muffler can be installed to prevent contaminants from entering
either the valve or the actuator. The 5-port design allows the
user to independently control actuator speed in either the open
or close direction. Speed or bleed controls are optional.
Single or double solenoid 2-position models are available.
Single solenoid spring return valves are typically applied on
“on/off” or “fail-safe” applications. Double solenoid valves
may be used in applications where a momentary signal is
required or in a “fail in last shifted position” actuator
application.
All solenoid actuators are solenoid/pilot type, which allows the use of the smaller solenoids resulting in lower power
consumption. This design assures a positive shift when the valve is energized and reduces the chance of coil burnout. Single
solenoid spring return models utilize an air assisted spring return feature assuring a positive return. Double solenoid models are
equipped with a detent that maintains the valve in the last shifted position, even in high vibration applications. A complete
selection of electrical connections, power requirements, area classifications, makes this the valve of choice for demanding
applications.
Flow Rate: Cv = 1.6 (Kv = 23.5) Port Size: Inlet and exhaust: ¼” NPT Cylinder ports: ‘O’ ring mount per NAMUR standard Media: Pneumatic only, Lubricator not required
Pressure: 25 to 150 psi (1.8 to 10.3 bar), Single solenoid, spring return 15 to 150 psi (1.0 to 10.3 bar), Double solenoid, detent For applications above 125 psi (8.6 bar), exhaust flow controls or mufflers are recommended. Temperature:
Materials: Valve body and internal parts: 316L stainless steel Actuator caps: 316L stainless steel Valve seals: FKM (fluorocarbon) Screws: Stainless steel Solenoid internal parts: 304, 430F and 302 stainless steel Coil/solenoid housing Per solenoid option selected. See option section.
NAMUR C-316 SERIES Stainless Steel NAMUR Mount Solenoids
Versa Products Company, Inc . , 22 Spring Valley Rd., Paramus, NJ 0 7 6 5 2 USA Phone (201) 843-2400 Fax (201) 843-2931 Versa BV, Prins Wil lem Alexanderlaan 1429, 7312 GB Apeldoorn, The Netherlands Phone: +31-55-368-1900 Fax: +31-55-368-1909 e-mail : sa [email protected] www.versa-valves.com
-55 to 200° F (-48 to 93° C), Media and ambient (option -44) -5 to 200° F (-20 to 93° C), Media and ambient (standard)
Bulletin C316NE c Bulletin C316NEFeb 2008NAMUR
Bulletin C316SFeb 2008
Side Ported
![Page 2: C-316SFeb2008](https://reader031.fdocuments.in/reader031/viewer/2022020517/577c7ed91a28abe054a28bb8/html5/thumbnails/2.jpg)
For warranty information and/or any additional information with regards to installation, operation and service warnings, please consult factory.
C-316 Stainless Steel Ordering Information
† Add suffix option here as required. See coil code below
* For 4-way add 0.1 lbs (45 grams)
GENERAL SERVICE HAZARDOUS SERVICE
(-XX, -XN, -XIS_) HAZARDOUS SERVICE
(-XMA_, -XIF_)
Single Solenoid/Spring Return 3-Way* 1.30 lbs (590 grams) 1.6 lbs (725 grams) 2.5 lbs (1130 grams)
Double Solenoid/Detented 3-Way* 1.9 lbs (860 grams) 2.6 lbs (1180 grams) 4.3 lbs (1950 grams)
Single Solenoid, Latching, 3-Way* 1.6 lbs (725 grams) 1.9 lbs (860 grams) 2.8 lbs (1270 grams)
Weights (approximate)
* Add 0.5” (12.7 mm) to “A” dimension for 4-Way Latch Valve † For dimentions –XDA_ consult factory
VALVE TYPE
SOLENOID OPTIONS
GENERAL SERVICE HAZARDOUS SERVICE
(-XX, -XN) HAZARDOUS SERVICE
(-XMA_, -XIF_) A B C A B C A B C
3-Way Single Solenoid, Spring Return†
Inches (mm)
5.31 (135.0)
1.04 (26.4)
2.13 (54.2)
5.41 (137.5)
1.44 (36.6)
2.30 (58.5)
6.31 (160.3)
2.56 (65)
4.13 (104.8)
4-Way Single Solenoid, Spring Return†
Inches (mm)
5.81 (147.7)
1.04 (26.4)
2.13 (54.2)
5.91 (150.2)
1.44 (36.6)
2.30 (58.5)
6.81 (173.0)
2.56 (65)
4.13 (104.8)
3-Way Double Solenoid, Detented†
Inches (mm)
8.33 (211.6)
1.04 (26.4)
2.13 (54.2)
8.53 (216.8)
1.44 (36.6)
2.30 (58.5)
10.33 (262.4)
2.56 (65)
4.13 (104.8)
4-Way Double Solenoid, Detented†
Inches (mm)
8.83 (224.3)
1.04 (26.4)
2.13 (54.2)
9.03 (229.5)
1.44 (36.6)
2.30 (58.5)
10.83 (275.0)
2.56 (65)
4.13 (104.8)
3-Way Single Solenoid, Latching*
Inches (mm)
6.41 (162.9)
1.04 (26.4)
2.34 (59.4)
6.51 (165.5)
1.44 (36.6)
2.34 (59.4)
7.41 (188.2)
2.56 (65)
4.13 (104.8)
Dimensions
Basic Valve Number FUNCTION DOUBLE SOLENOID/
DETENT, 2 POSITION LATCHING, SINGLE SOLENOID/
SPRING RETURN
4-Way
5/2
CGG-4322-316-†-(coil code) CAG-4322-316-356BN-†-(coil code)
3-Way NC
3/2
CGG-3321-316-†-(coil code) CAG-3321-316-356BN-†-(coil code)
3-Way NO
3/2
CGG-3321-316-†-(coil code) CGA-3322-316-356BN-†-(coil code)
SINGLE SOLENOID/SPRING RETURN, 2 POSITION
CSG-4322-316-†-(coil code)
CSG-3321-316-†-(coil code)
CGS-3322-316-†-(coil code)
Suffix Detail
Solenoid Housing Material
Voltages (Coil Codes) All options available in all voltages, except where noted. Consult factory for other voltages.
NOMINAL COIL POWER
AC/DC (watts)
GENERAL
General Purpose ½” NPT conduit, NEMA 1,2 & 3*½” NPT conduit, watertight, NEMA 4 & 4X*Cord grip PG9 mini-DIN type connector, NEMA 4 ½” NPT conduit mini-DIN type connector, NEMA 4
None -PC -HC
-HCC
Carbon Steel, Painted Carbon Steel, Chromate coated Engineered polymer Engineered polymer
12VDC (D012) 24VDC (D024) 48VDC (D048) 120V60 (A120) 110V50 (E110) 220V50 (E220) 240V60 (A240)
6.0/7.0 6.0/7.0
6.5/10.5 6.5/10.5
Explosion Proof ½” NPT conduit, NEMA 7 & 9, UL listed, CSA approved*
For Low power, add –LB with –XX For Watertight, add –PC with –XX For Stainless housing, add –ST with –XX
Flameproof (d) M20x1.5 conduit, II 2 G EEX d IIB + H2 T6 or T4*
For Low power, add –LB with –XN For Watertight add –PC with –XN For Stainless housing add –ST with –XN M20x1.5 conduit, II 2 G EEX d IIC T4 or T5 or T6* ½” NPT conduit, II 2 G EEX d IIC T4 or T5 or T6*
Encapsulated (m), Increased Safety (e)†
M20x1.5 conduit, II 2 G EEX me II T5...T6- ½” NPT conduit, II 2 G EEX me II T5...T6
Intrinsically safe (ia)** Cord grip PG 9, Class I, II & III, Div 1, Group A thru G, FM/CSA Cord grip PG 9, II 2 G EEX ia IIC T6 M20x1.5 conduit, II 2 G EEX ia IIC T4...T6 ½” NPT conduit, II 2 G EEX ia IIC T4...T6
-XX -LB-XX -PC-XX -ST-XX
-XN
-LB-XN -PC-XN -ST-XN XDAS XDAT
-XMAA -XMAF
-XISC -XISX6
-XIFA†-XIFF†
Carbon Steel, Chromate coated Carbon Steel, Chromate coated Carbon Steel, Chromate coated Stainless Steel
Carbon Steel, Chromate coated
Carbon Steel, Chromate coated Carbon Steel, Chromate coated Stainless Steel Stainless Steel w/ Junction Box Stainless Steel w/ Junction Box
Engineered polymer
Engineered polymer
Engineered polymer Engineered polymer
Engineered polymer Engineered polymer
5.6/7.2 1.8/1.8 5.6/7.2 5.6/7.2
5.6/7.2 1.8/1.8 5.6/7.2 5.6/7.2
10.0/4.0 – 10.0 10.0/4.0 – 10.0
na/4.0 na/4.0
na/1.6 na/1.6 na/0.8 na/0.8
MISC
Manual override, un-guarded push and hold (not available with all solenoid options) Solenoid exhaust adapter, 1/8 NPT For expilot solenoid consult factory
-ME
-H2
N/A
N/A
HAZARDOUS
LOCATION
Electrical Options
While due care was exercised in preparing this document, Versa Products Company, Inc. shall not be liable for any inaccuracies or omissions. Specifications Subject to change without notice.
NOTES
* For high temperature coil add, -HT (included in XMA_, XIF_)
** 24 Volt DC only † Contact factory for other options in this series
Versa Products Company, Inc . , 22 Spring Valley Rd., Paramus, NJ 0 7 6 5 2 USA Phone (201) 843-2400 Fax (201) 843-2931 Versa BV, Prins Wil lem Alexanderlaan 1429, 7312 GB Apeldoorn, The Netherlands Phone: +31-55-368-1900 Fax: +31-55-368-1909 e-mail: sa [email protected] www.versa-valves.com
*All valves include 0-ring interface seals and #10-24 mounting screws. For #10-32 screws change NE1 to NE2. For M5 screws change NE1 to NE3. † Add suffix option here, if required. See coil code below.
FUNCTION SINGLE SOLENOID/SPRING
RETURN, 2 POSITION DOUBLE SOLENOID/ DETENT, 2 POSITION
4-Way
5/2
CGS-4332-316 NE1-†-(coil code) CGG-4332-316 NE1-†-(coil code)
3-Way
3/2
CGS-3331-316 NE1-†-(coil code) CGG-3331-316-NE1-†-(coil code)
Basic Valve Number*
*For dimensions –XDA_ consult factory
C-316 NAMUR Ordering Information
SOLENOID OPTIONS
GENERAL SERVICE HAZARDOUS SERVICE (-XX, -XN)
HAZARDOUS SERVICE (-XMA_, -XIF_)
A B C A B C A B C
Single Solenoid, Spring Return,
3-Way or 4-Way*
Inches (mm)
5.56 (141.3)
1.04 (26.4)
2.15 (54.7)
5.66 (143.9)
1.44 (36.6)
2.32 (59.0)
6.56 (166.6)
2.56 (65)
4.15 (104.8)
Double Solenoid 3-Way or 4-Way*
Inches (mm)
8.57 (217.7)
1.04(26.4)
2.15 (54.7)
8.78 (223.1)
1.44 (36.6)
2.33 (59.0)
10.58 (268.7)
2.56 (65)
4.15 (104.8)
VALVE TYPE
Dimensions
For warranty information and/or any additional information with regards to installation, operation and service warnings, please consult factory.
Suffix Detail
Solenoid Housing Material
Voltages (Coil Codes) All options available in all voltages, except where noted. Consult factory for other voltages.
NOMINAL COIL POWER
AC/DC (watts)
GENERAL
General Purpose ½” NPT conduit, NEMA 1,2 & 3*½” NPT conduit, watertight, NEMA 4 & 4X*Cord grip PG9 mini-DIN type connector, NEMA 4 ½” NPT conduit mini-DIN type connector, NEMA 4
None -PC -HC
-HCC
Carbon Steel, Painted Carbon Steel, Chromate coated Engineered polymer Engineered polymer
12VDC (D012) 24VDC (D024) 48VDC (D048) 120V60 (A120) 110V50 (E110) 220V50 (E220) 240V60 (A240)
6.0/7.0 6.0/7.0
6.5/10.5 6.5/10.5
Explosion Proof ½” NPT conduit, NEMA 7 & 9, UL listed, CSA approved*
For Low power,add –LB with –XX For Watertight add –PC with –XX For Stainless housing add –ST with –XX
Flameproof (d) M20x1.5 conduit, II 2 G EEX d IIB + H2 T6 or T4*
For Low power,add –LB with –XN For Watertight add –PC with –XN For Stainless housing add –ST with –XN M20x1.5 conduit, II 2 G EEX d IIC T4 or T5 or T6* ½” NPT conduit, II 2 G EEX d IIC T4 or T5 or T6*
Encapsulated (m), Increased Safety (e)†
M20x1.5 conduit, II 2 G EEX me II T5...T6 ½” NPT conduit, II 2 G EEX me II T5...T6
Intrinsically safe (ia)** Cord grip PG 9, Class I, II & III, Div 1, Group A thru G, FM/CSA Cord grip PG 9, II 2 G EEX ia IIC T6 M20x1.5 conduit, II 2 G EEX ia IIC T4...T6 ½” NPT conduit, II 2 G EEX ia IIC T4...T6
-XX -LB-XX -PC-XX -ST-XX
-XN
-LB-XN -PC-XN -ST-XN XDASXDAT
-XMAA -XMAF
-XISC -XISX6
-XIFA†-XIFF†
Carbon Steel, Chromate coated Carbon Steel, Chromate coated Carbon Steel, Chromate coated Stainless Steel
Carbon Steel, Chromate coated
Carbon Steel, Chromate coated Carbon Steel, Chromate coated Stainless Steel Stainless Steel w/ Junction Box Stainless Steel w/ Junction Box
Engineered polymer
Engineered polymer
Engineered polymer Engineered polymer
Engineered polymer Engineered polymer
5.6/7.2 1.8/1.8 5.6/7.2 5.6/7.2
5.6/7.2 1.8/1.8 5.6/7.2 5.6/7.2
10.0/4.0 – 10.0 10.0/4.0 – 10.0
na/4.0 na/4.0
na/1.6 na/1.6 na/0.8 na/0.8
MISC
Manual Override, un-guarded push and hold (not available with all Solenoid options) Solenoid exhaust adapter, 1/8 NPT
-ME
-H2
N/A
N/A
HAZARDOUS
LOCATION
Electrical Options
While due care was exercised in preparing this document, Versa Products Company, Inc. shall not be liable for any inaccuracies or omissions. Specifications Subject to change without notice.
NOTES
* For high temperature coil add, -HT (included in XMA_, XIF_)
** 24 Volt DC only † Contact factory for other options in this series
Weights (approximate)
VALVE TYPE GENERAL SERVICE HAZARDOUS SERVICE HAZARDOUS SERVICE
Single Solenoid/Spring
1.30 lbs 590 grams) 1.6 lbs (725 grams) 2.5 lbs (1130 grams)
Double Solenoid/Detented (2-position)
1.9 lbs (860 grams) 2.6 lbs (1180 grams) 4.3 lbs (1950 grams)
Versa P roducts C ompany, I nc . , 22 S pring V alley R d., P aramus, N J 0 7 6 5 2 U SA P hone ( 201) 843-2400 Fax (201) 843-2931 Ver sa BV, Pr ins Wi l lem Alexanderlaan 1429, 7312 GB Apeldoorn, The Net herlands Phone: +31-55-368-1900 Fax: +31-55-368-1909 e-mail: s a [email protected] www. versa-valves.com
Return (2-position)
(-XX, -XN, -XIS-) (-XMA-, XIF-)